=============================
The MLX4 poll mode driver library (**librte_pmd_mlx4**) implements support
-for **Mellanox ConnectX-3 EN** 10/40 Gbps adapters as well as their virtual
-functions (VF) in SR-IOV context.
+for **Mellanox ConnectX-3** and **Mellanox ConnectX-3 Pro** 10/40 Gbps adapters
+as well as their virtual functions (VF) in SR-IOV context.
Information and documentation about this family of adapters can be found on
the `Mellanox website <http://www.mellanox.com>`_. Help is also provided by
Compiling librte_pmd_mlx4 causes DPDK to be linked against libibverbs.
-Features and limitations
-------------------------
+Features
+--------
- RSS, also known as RCA, is supported. In this mode the number of
configured RX queues must be a power of two.
- Scattered packets are supported for TX and RX.
- Inner L3/L4 (IP, TCP and UDP) TX/RX checksum offloading and validation.
- Outer L3 (IP) TX/RX checksum offloading and validation for VXLAN frames.
+- Secondary process TX is supported.
-.. break
+Limitations
+-----------
- RSS hash key cannot be modified.
+- RSS RETA cannot be configured
+- RSS always includes L3 (IPv4/IPv6) and L4 (UDP/TCP). They cannot be
+ dissociated.
- Hardware counters are not implemented (they are software counters).
+- Secondary process RX is not supported.
Configuration
-------------
Currently supported by DPDK:
-- Mellanox OFED **3.0**.
-- Firmware version **2.34.5000** and higher.
+- Mellanox OFED **4.0-1.0.1.0**.
+- Firmware version **2.40.5030**.
+- Supported architectures: **x86_64** and **POWER8**.
Getting Mellanox OFED
~~~~~~~~~~~~~~~~~~~~~
this DPDK release was developed and tested against is strongly
recommended. Please check the `prerequisites`_.
+Supported NICs
+--------------
+
+* Mellanox(R) ConnectX(R)-3 Pro 40G MCX354A-FCC_Ax (2*40G)
+
Usage example
-------------
modprobe -a ib_uverbs mlx4_en mlx4_core mlx4_ib
+ Alternatively if MLNX_OFED is fully installed, the following script can
+ be run:
+
+ .. code-block:: console
+
+ /etc/init.d/openibd restart
+
.. note::
User space I/O kernel modules (uio and igb_uio) are not used and do
.. code-block:: console
- testpmd -c 0xff00 -n 4 -w 0000:83:00.0 -w 0000:84:00.0 -- --rxq=2 --txq=2 -i
+ testpmd -l 8-15 -n 4 -w 0000:83:00.0 -w 0000:84:00.0 -- --rxq=2 --txq=2 -i
Example output: