+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright 2017 The DPDK contributors
+
DPDK Release 17.08
==================
Also, make sure to start the actual text at the margin.
=========================================================
-* **Added support for generic flow API (rte_flow) on igb NIC.**
+* **Increase minimum x86 ISA version to SSE4.2.**
+
+ Starting with version 17.08, DPDK requires SSE4.2 to run on x86.
+ Previous versions required SSE3.
+
+* **Added Service Core functionality.**
+
+ The service core functionality added to EAL allows DPDK to run services such
+ as software PMDs on lcores without the application manually running them. The
+ service core infrastructure allows flexibility of running multiple services
+ on the same service lcore, and provides the application with powerful APIs to
+ configure the mapping from service lcores to services.
+
+* **Added Generic Receive Offload API.**
+
+ Added Generic Receive Offload (GRO) API support to reassemble TCP/IPv4
+ packets. The GRO API assumes all input packets have the correct
+ checksums. GRO API doesn't update checksums for merged packets. If
+ input packets are IP fragmented, the GRO API assumes they are complete
+ packets (i.e. with L4 headers).
+
+* **Added Fail-Safe PMD**
- This API provides a generic means to configure hardware to match specific
- ingress or egress traffic, alter its behavior and query related counters
+ Added the new Fail-Safe PMD. This virtual device allows applications to
+ support seamless hotplug of devices.
+ See the :doc:`/nics/fail_safe` guide for more details about this driver.
+
+* **Added support for generic flow API (rte_flow) on igb NICs.**
+
+ This API provides a generic means of configuring hardware to match specific
+ ingress or egress traffic, altering its behavior and querying related counters
according to any number of user-defined rules.
- * Generic flow API support for Ethernet, IPv4, UDP, TCP and
- RAW pattern items with QUEUE actions. There are four
- type of filter support for this feature on igb.
+ Added generic flow API support for Ethernet, IPv4, UDP, TCP and RAW pattern
+ items with QUEUE actions. There are four types of filter support for this
+ feature on igb.
-* **Added Generic Flow API support to enic.**
+* **Added support for generic flow API (rte_flow) on enic.**
- Flow API support for outer Ethernet, VLAN, IPv4, IPv6, UDP, TCP, SCTP, VxLAN
- and inner Ethernet, VLAN, IPv4, IPv6, UDP and TCP pattern items with QUEUE,
- MARK, FLAG and VOID actions for ingress traffic.
+ Added flow API support for outer Ethernet, VLAN, IPv4, IPv6, UDP, TCP, SCTP,
+ VxLAN and inner Ethernet, VLAN, IPv4, IPv6, UDP and TCP pattern items with
+ QUEUE, MARK, FLAG and VOID actions for ingress traffic.
* **Added support for Chelsio T6 family of adapters**
- CXGBE PMD updated to run Chelsio T6 family of adapters.
+ The CXGBE PMD was updated to run Chelsio T6 family of adapters.
* **Added latency and performance improvements for cxgbe**
- TX and RX path reworked to improve performance. Also reduced latency
- for slow traffic.
+ the Tx and Rx path in cxgbe were reworked to improve performance. In
+ addition the latency was reduced for slow traffic.
+
+* **Updated the bnxt PMD.**
-* **Updated bnxt PMD.**
+ Updated the bnxt PMD. The major enhancements include:
- Major enhancements include:
* Support MTU modification.
- * Support LRO.
- * Support VLAN filter and strip functionality.
- * Other enhancements to add support for more dev_ops.
- * Add PMD specific APIs mainly to control VF from PF.
+ * Add support for LRO.
+ * Add support for VLAN filter and strip functionality.
+ * Additional enhancements to add support for more dev_ops.
+ * Added PMD specific APIs mainly to control VF from PF.
* Update HWRM version to 1.7.7
* **Added support for Rx interrupts on mlx4 driver.**
- Rx queues can be armed with an interrupt which will trigger on the
+ Rx queues can be now be armed with an interrupt which will trigger on the
next packet arrival.
+* **Updated mlx5 driver.**
+
+ Updated the mlx5 driver including the following changes:
+
+ * Added vectorized Rx/Tx burst for x86.
+ * Added support for isolated mode from flow API.
+ * Reworked the flow drop action to implement in hardware classifier.
+ * Improved Rx interrupts management.
+
* **Updated szedata2 PMD.**
- Added support for firmwares with multiple Ethernet ports per physical port.
+ Added support for firmware with multiple Ethernet ports per physical port.
+
+* **Updated dpaa2 PMD.**
+
+ Updated dpaa2 PMD. Major enhancements include:
+
+ * Added support for MAC Filter configuration.
+ * Added support for Segmented Buffers.
+ * Added support for VLAN filter and strip functionality.
+ * Additional enhancements to add support for more dev_ops.
+ * Optimized the packet receive path
* **Reorganized the symmetric crypto operation structure.**
The crypto operation (``rte_crypto_sym_op``) has been reorganized as follows:
- * Removed field ``rte_crypto_sym_op_sess_type``.
- * Replaced pointer and physical address of IV with offset from the start
+ * Removed the ``rte_crypto_sym_op_sess_type`` field.
+ * Replaced the pointer and physical address of IV with offset from the start
of the crypto operation.
* Moved length and offset of cipher IV to ``rte_crypto_cipher_xform``.
- * Removed Additional Authentication Data (AAD) length.
+ * Removed "Additional Authentication Data" (AAD) length.
* Removed digest length.
* Removed AAD pointer and physical address from ``auth`` structure.
* Added ``aead`` structure, containing parameters for AEAD algorithms.
The crypto operation (``rte_crypto_op``) has been reorganized as follows:
- * Added field ``rte_crypto_op_sess_type``.
- * Enumerations ``rte_crypto_op_status`` and ``rte_crypto_op_type``
- have been modified to be uint8_t values.
+ * Added the ``rte_crypto_op_sess_type`` field.
+ * The enumerations ``rte_crypto_op_status`` and ``rte_crypto_op_type``
+ have been modified to be ``uint8_t`` values.
* Removed the field ``opaque_data``.
* Pointer to ``rte_crypto_sym_op`` has been replaced with a zero length array.
+* **Reorganized the crypto symmetric session structure.**
+
+ The crypto symmetric session structure (``rte_cryptodev_sym_session``) has
+ been reorganized as follows:
+
+ * The ``dev_id`` field has been removed.
+ * The ``driver_id`` field has been removed.
+ * The mempool pointer ``mp`` has been removed.
+ * Replaced ``private`` marker with array of pointers to private data sessions
+ ``sess_private_data``.
+
* **Updated cryptodev library.**
* Added AEAD algorithm specific functions and structures, so it is not
necessary to use a combination of cipher and authentication
structures anymore.
+ * Added helper functions for crypto device driver identification.
+ * Added support for multi-device sessions, so a single session can be
+ used in multiple drivers.
+ * Added functions to initialize and free individual driver private data
+ with the same session.
* **Updated dpaa2_sec crypto PMD.**
- Added support for AES-GCM and AES-CTR
+ Added support for AES-GCM and AES-CTR.
* **Updated the AESNI MB PMD.**
The AESNI MB PMD has been updated with additional support for:
- * 12-byte IV on AES Counter Mode, apart from the previous 16-byte IV.
+ * 12-byte IV on AES Counter Mode, apart from the previous 16-byte IV.
* **Updated the AES-NI GCM PMD.**
The AES-NI GCM PMD was migrated from the ISA-L library to the Multi Buffer
library, as the latter library has Scatter Gather List support
- now. The migration entailed adding additional support for:
-
- * 192-bit key.
-
-
-Resolved Issues
----------------
-
-.. This section should contain bug fixes added to the relevant
- sections. Sample format:
-
- * **code/section Fixed issue in the past tense with a full stop.**
-
- Add a short 1-2 sentence description of the resolved issue in the past
- tense.
+ now. The migration entailed adding additional support for 192-bit keys.
- The title should contain the code/lib section like a commit message.
+* **Updated the Cryptodev Scheduler PMD.**
- Add the entries in alphabetic order in the relevant sections below.
+ Added a multicore based distribution mode, which distributes the enqueued
+ crypto operations among several slaves, running on different logical cores.
- This section is a comment. do not overwrite or remove it.
- Also, make sure to start the actual text at the margin.
- =========================================================
-
-
-EAL
-~~~
-
-
-Drivers
-~~~~~~~
+* **Added NXP DPAA2 Eventdev PMD.**
+ Added the new dpaa2 eventdev driver for NXP DPAA2 devices. See the
+ "Event Device Drivers" document for more details on this new driver.
-Libraries
-~~~~~~~~~
+* **Added dpdk-test-eventdev test application.**
-
-Examples
-~~~~~~~~
-
-
-Other
-~~~~~
+ The dpdk-test-eventdev tool is a Data Plane Development Kit (DPDK) application
+ that allows exercising various eventdev use cases.
+ This application has a generic framework to add new eventdev based test cases
+ to verify functionality and measure the performance parameters of DPDK
+ eventdev devices.
Known Issues
Also, make sure to start the actual text at the margin.
=========================================================
+* **Starting with version 17.08, libnuma is required to build DPDK.**
+
API Changes
-----------
Also, make sure to start the actual text at the margin.
=========================================================
+* **Modified the _rte_eth_dev_callback_process function in the ethdev library.**
+
+ The function ``_rte_eth_dev_callback_process()`` has been modified. The
+ return value has been changed from void to int and an extra parameter ``void
+ *ret_param`` has been added.
+
+* **Moved bypass functions from the rte_ethdev library to ixgbe PMD**
+
+ * The following rte_ethdev library functions were removed:
+
+ * ``rte_eth_dev_bypass_event_show()``
+ * ``rte_eth_dev_bypass_event_store()``
+ * ``rte_eth_dev_bypass_init()``
+ * ``rte_eth_dev_bypass_state_set()``
+ * ``rte_eth_dev_bypass_state_show()``
+ * ``rte_eth_dev_bypass_ver_show()``
+ * ``rte_eth_dev_bypass_wd_reset()``
+ * ``rte_eth_dev_bypass_wd_timeout_show()``
+ * ``rte_eth_dev_wd_timeout_store()``
+
+ * The following ixgbe PMD functions were added:
+
+ * ``rte_pmd_ixgbe_bypass_event_show()``
+ * ``rte_pmd_ixgbe_bypass_event_store()``
+ * ``rte_pmd_ixgbe_bypass_init()``
+ * ``rte_pmd_ixgbe_bypass_state_set()``
+ * ``rte_pmd_ixgbe_bypass_state_show()``
+ * ``rte_pmd_ixgbe_bypass_ver_show()``
+ * ``rte_pmd_ixgbe_bypass_wd_reset()``
+ * ``rte_pmd_ixgbe_bypass_wd_timeout_show()``
+ * ``rte_pmd_ixgbe_bypass_wd_timeout_store()``
+
+* **Reworked rte_cryptodev library.**
+
+ The rte_cryptodev library has been reworked and updated. The following changes
+ have been made to it:
+
+ * The crypto device type enumeration has been removed from cryptodev library.
+ * The function ``rte_crypto_count_devtype()`` has been removed, and replaced
+ by the new function ``rte_crypto_count_by_driver()``.
+ * Moved crypto device driver names definitions to the particular PMDs.
+ These names are not public anymore.
+ * The ``rte_cryptodev_configure()`` function does not create the session
+ mempool for the device anymore.
+ * The ``rte_cryptodev_queue_pair_attach_sym_session()`` and
+ ``rte_cryptodev_queue_pair_dettach_sym_session()`` functions require
+ the new parameter ``device id``.
+ * Parameters of ``rte_cryptodev_sym_session_create()`` were modified to
+ accept ``mempool``, instead of ``device id`` and ``rte_crypto_sym_xform``.
+ * Removed ``device id`` parameter from ``rte_cryptodev_sym_session_free()``.
+ * Added a new field ``session_pool`` to ``rte_cryptodev_queue_pair_setup()``.
+ * Removed ``aad_size`` parameter from
+ ``rte_cryptodev_sym_capability_check_auth()``.
+ * Added ``iv_size`` parameter to
+ ``rte_cryptodev_sym_capability_check_auth()``.
+ * Removed ``RTE_CRYPTO_OP_STATUS_ENQUEUED`` from enum
+ ``rte_crypto_op_status``.
+
ABI Changes
-----------
Also, make sure to start the actual text at the margin.
=========================================================
+* Changed type of ``domain`` field in ``rte_pci_addr`` to ``uint32_t``
+ to follow the PCI standard.
+
+* Added new ``rte_bus`` experimental APIs available as operators within the
+ ``rte_bus`` structure.
+
+* Made ``rte_devargs`` structure internal device representation generic to
+ prepare for a bus-agnostic EAL.
+
* **Reorganized the crypto operation structures.**
- Some fields have been modified in the ``rte_crypto_op`` and ``rte_crypto_sym_op``
- structures, as described in the `New Features`_ section.
+ Some fields have been modified in the ``rte_crypto_op`` and
+ ``rte_crypto_sym_op`` structures, as described in the `New Features`_
+ section.
+
+* **Reorganized the crypto symmetric session structure.**
+
+ Some fields have been modified in the ``rte_cryptodev_sym_session``
+ structure, as described in the `New Features`_ section.
-* **Reorganized the ``rte_crypto_sym_cipher_xform`` structure.**
+* **Reorganized the rte_crypto_sym_cipher_xform structure.**
* Added cipher IV length and offset parameters.
+ * Changed field size of key length from ``size_t`` to ``uint16_t``.
-* **Reorganized the ``rte_crypto_sym_auth_xform`` structure.**
+* **Reorganized the rte_crypto_sym_auth_xform structure.**
* Added authentication IV length and offset parameters.
- * Changed field size of AAD length from uint32_t to uint16_t.
- * Changed field size of digest length from uint32_t to uint16_t.
+ * Changed field size of AAD length from ``uint32_t`` to ``uint16_t``.
+ * Changed field size of digest length from ``uint32_t`` to ``uint16_t``.
* Removed AAD length.
+ * Changed field size of key length from ``size_t`` to ``uint16_t``.
+
+* Replaced ``dev_type`` enumeration with ``uint8_t`` ``driver_id`` in
+ ``rte_cryptodev_info`` and ``rte_cryptodev`` structures.
+
+* Removed ``session_mp`` from ``rte_cryptodev_config``.
Shared Library Versions
librte_cmdline.so.2
+ librte_cryptodev.so.3
librte_distributor.so.1
- librte_eal.so.4
- librte_ethdev.so.6
+ + librte_eal.so.5
+ + librte_ethdev.so.7
+ + librte_eventdev.so.2
+ + librte_gro.so.1
librte_hash.so.2
librte_ip_frag.so.1
librte_jobstats.so.1
This section is a comment. do not overwrite or remove it.
Also, make sure to start the actual text at the margin.
=========================================================
+
+* Intel(R) platforms with Mellanox(R) NICs combinations
+
+ * Platform details:
+
+ * Intel(R) Xeon(R) CPU E5-2697A v4 @ 2.60GHz
+ * Intel(R) Xeon(R) CPU E5-2697 v3 @ 2.60GHz
+ * Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz
+ * Intel(R) Xeon(R) CPU E5-2640 @ 2.50GHz
+
+ * OS:
+
+ * Red Hat Enterprise Linux Server release 7.3 (Maipo)
+ * Red Hat Enterprise Linux Server release 7.2 (Maipo)
+ * Ubuntu 16.10
+ * Ubuntu 16.04
+ * Ubuntu 14.04
+
+ * MLNX_OFED: 4.1-1.0.2.0
+
+ * NICs:
+
+ * Mellanox(R) ConnectX(R)-3 Pro 40G MCX354A-FCC_Ax (2x40G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1007
+ * Firmware version: 2.40.5030
+
+ * Mellanox(R) ConnectX(R)-4 10G MCX4111A-XCAT (1x10G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 10G MCX4121A-XCAT (2x10G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 25G MCX4111A-ACAT (1x25G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 25G MCX4121A-ACAT (2x25G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 40G MCX4131A-BCAT/MCX413A-BCAT (1x40G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 40G MCX415A-BCAT (1x40G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 50G MCX4131A-GCAT/MCX413A-GCAT (1x50G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 50G MCX414A-BCAT (2x50G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 50G MCX415A-GCAT/MCX416A-BCAT/MCX416A-GCAT
+ (2x50G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 50G MCX415A-CCAT (1x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 100G MCX416A-CCAT (2x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 Lx 10G MCX4121A-XCAT (2x10G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1015
+ * Firmware version: 14.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 Lx 25G MCX4121A-ACAT (2x25G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1015
+ * Firmware version: 14.18.2000
+
+ * Mellanox(R) ConnectX(R)-5 100G MCX556A-ECAT (2x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1017
+ * Firmware version: 16.19.1200
+
+ * Mellanox(R) ConnectX-5 Ex EN 100G MCX516A-CDAT (2x100G)
+
+ * Host interface: PCI Express 4.0 x16
+ * Device ID: 15b3:1019
+ * Firmware version: 16.19.1200
+
+* Intel(R) platforms with Intel(R) NICs combinations
+
+ * CPU
+
+ * Intel(R) Atom(TM) CPU C2758 @ 2.40GHz
+ * Intel(R) Xeon(R) CPU D-1540 @ 2.00GHz
+ * Intel(R) Xeon(R) CPU D-1541 @ 2.10GHz
+ * Intel(R) Xeon(R) CPU E5-4667 v3 @ 2.00GHz
+ * Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz
+ * Intel(R) Xeon(R) CPU E5-2699 v3 @ 2.30GHz
+ * Intel(R) Xeon(R) CPU E5-2695 v4 @ 2.10GHz
+ * Intel(R) Xeon(R) CPU E5-2658 v2 @ 2.40GHz
+ * Intel(R) Xeon(R) CPU E5-2658 v3 @ 2.20GHz
+
+ * OS:
+
+ * CentOS 7.2
+ * Fedora 25
+ * FreeBSD 11
+ * Red Hat Enterprise Linux Server release 7.3
+ * SUSE Enterprise Linux 12
+ * Wind River Linux 8
+ * Ubuntu 16.04
+ * Ubuntu 16.10
+
+ * NICs:
+
+ * Intel(R) 82599ES 10 Gigabit Ethernet Controller
+
+ * Firmware version: 0x61bf0001
+ * Device id (pf/vf): 8086:10fb / 8086:10ed
+ * Driver version: 4.0.1-k (ixgbe)
+
+ * Intel(R) Corporation Ethernet Connection X552/X557-AT 10GBASE-T
+
+ * Firmware version: 0x800001cf
+ * Device id (pf/vf): 8086:15ad / 8086:15a8
+ * Driver version: 4.2.5 (ixgbe)
+
+ * Intel(R) Ethernet Converged Network Adapter X710-DA4 (4x10G)
+
+ * Firmware version: 6.01 0x80003205
+ * Device id (pf/vf): 8086:1572 / 8086:154c
+ * Driver version: 2.0.19 (i40e)
+
+ * Intel(R) Ethernet Converged Network Adapter X710-DA2 (2x10G)
+
+ * Firmware version: 6.01 0x80003204
+ * Device id (pf/vf): 8086:1572 / 8086:154c
+ * Driver version: 2.0.19 (i40e)
+
+ * Intel(R) Ethernet Converged Network Adapter XXV710-DA2 (2x25G)
+
+ * Firmware version: 6.01 0x80003221
+ * Device id (pf/vf): 8086:158b
+ * Driver version: 2.0.19 (i40e)
+
+ * Intel(R) Ethernet Converged Network Adapter XL710-QDA2 (2X40G)
+
+ * Firmware version: 6.01 0x8000321c
+ * Device id (pf/vf): 8086:1583 / 8086:154c
+ * Driver version: 2.0.19 (i40e)
+
+ * Intel(R) Corporation I350 Gigabit Network Connection
+
+ * Firmware version: 1.48, 0x800006e7
+ * Device id (pf/vf): 8086:1521 / 8086:1520
+ * Driver version: 5.2.13-k (igb)