Also, make sure to start the actual text at the margin.
=========================================================
-* **FreeBSD now supports `--base-virtaddr` EAL option.**
+* **Added support for --base-virtaddr EAL option to FreeBSD.**
- FreeBSD version now also supports setting base virtual address for mapping
- pages and resources into its address space.
+ The FreeBSD version of DPDK now also supports setting base virtual address
+ for mapping pages and resources into its address space.
* **Added Lock-free Stack for aarch64.**
- The lock-free stack implementation is enabled for aarch64 platforms.
+ Enabled the lock-free stack implementation for aarch64 platforms.
-* **Updated the enic driver.**
+* **Extended pktmbuf mempool private structure.**
- * Added support for Geneve with options offload.
- * Added flow API implementation based on VIC Flow Manager API.
+ rte_pktmbuf_pool_private structure was extended to include flags field
+ for future compatibility.
+ As per 19.11 release this field is reserved and should be set to 0
+ by the user.
+
++* **Changed mempool allocation behavior.**
+
+ Changed the mempool allocation behaviour so that objects no longer cross
+ pages by default. Note, this may consume more memory when using small memory
+ pages.
+
+* **Added support for dynamic fields and flags in mbuf.**
+
+ This new feature adds the ability to dynamically register some room
+ for a field or a flag in the mbuf structure. This is typically used
+ for specific offload features, where adding a static field or flag
+ in the mbuf is not justified.
+
+* **Added support for hairpin queues.**
+
+ On supported NICs, we can now setup hairpin queues which will offload packets
+ from the wire, back to the wire.
+
+* **Added flow tag in rte_flow.**
+
+ The ``SET_TAG`` action and ``TAG`` item have been added to support transient
+ flow tag.
+
+* **Extended metadata support in rte_flow.**
+
+ Flow metadata has been extended to both Rx and Tx.
+
+ * Tx metadata can also be set by SET_META action of rte_flow.
+ * Rx metadata is delivered to the host via a dynamic field of ``rte_mbuf``
+ with ``PKT_RX_DYNF_METADATA``.
+
+* **Added ethdev API to set supported packet types.**
+
+ * Added new API ``rte_eth_dev_set_ptypes`` which allows an application to
+ inform a PMD about a reduced range of packet types to handle.
+ * This scheme will allow PMDs to avoid lookup of internal ptype table on Rx
+ and thereby improve Rx performance if the application wishes to do so.
+
+* **Added Rx offload flag to enable or disable RSS update.**
+
+ * Added new Rx offload flag ``DEV_RX_OFFLOAD_RSS_HASH`` which can be used to
+ enable/disable PMDs write to ``rte_mbuf::hash::rss``.
+ * PMDs notify the validity of ``rte_mbuf::hash:rss`` to the application
+ by enabling ``PKT_RX_RSS_HASH`` flag in ``rte_mbuf::ol_flags``.
+
+* **Added Rx/Tx packet burst mode "get" API.**
+
+ Added two new functions ``rte_eth_rx_burst_mode_get`` and
+ ``rte_eth_tx_burst_mode_get`` that allow an application
+ to retrieve the mode information about Rx/Tx packet burst
+ such as Scalar or Vector, and Vector technology like AVX2.
* **Added Hisilicon hns3 PMD.**
Added the new ``hns3`` net driver for the inbuilt Hisilicon Network
- Subsystem 3(HNS3) network engine found in the Hisilicon Kunpeng 920 SoC.
+ Subsystem 3 (HNS3) network engine found in the Hisilicon Kunpeng 920 SoC.
See the :doc:`../nics/hns3` guide for more details on this new driver.
* **Added NXP PFE PMD.**
Added the new PFE driver for the NXP LS1012A platform. See the
:doc:`../nics/pfe` NIC driver guide for more details on this new driver.
+* **Updated Broadcom bnxt driver.**
+
+ Updated Broadcom bnxt driver with new features and improvements, including:
+
+ * Added support for hot firmware upgrade.
+ * Added support for error recovery.
+ * Added support for querying and using COS classification in hardware.
+ * Added LRO support Thor devices.
+ * Update HWRM API to version 1.10.1.6
+
+* **Updated the enic driver.**
+
+ * Added support for Geneve with options offload.
+ * Added flow API implementation based on VIC Flow Manager API.
+
* **Updated iavf PMD.**
Enable AVX2 data path for iavf PMD.
Added support for the ``RTE_ETH_DEV_CLOSE_REMOVE`` flag.
-* **Added RX/TX packet burst mode get API.**
-
- Added two new functions ``rte_eth_rx_burst_mode_get`` and
- ``rte_eth_tx_burst_mode_get`` that allow an application
- to retrieve the mode information about RX/TX packet burst
- such as Scalar or Vector, and Vector technology like AVX2.
- Another new function ``rte_eth_burst_mode_option_name`` is
- provided for burst mode options stringification.
-
* **Updated the Intel ice driver.**
Updated the Intel ice driver with new features and improvements, including:
- Supported pipeline mode.
- Supported new packet type like PPPoE for switch filter.
* Supported input set change and symmetric hash by rte_flow RSS action.
-
-* **Added cryptodev asymmetric session-less operation.**
-
- Added session-less option to cryptodev asymmetric structure. It works the same
- way as symmetric crypto, corresponding xform is used directly by the crypto op.
+ * Added support for GTP Tx checksum offload.
+ * Added new device IDs to support E810_XXV devices.
* **Updated the Huawei hinic driver.**
* Enabled SR-IOV - Partially supported at this point, VFIO only.
* Supported VLAN filter and VLAN offload.
* Supported Unicast MAC filter and Multicast MAC filter.
- * Supported Flow director for LACP, VRRP, BGP and so on.
+ * Supported Flow API for LACP, VRRP, BGP and so on.
* Supported FW version get.
* **Updated Mellanox mlx5 driver.**
* Added support for VLAN set PCP offload command.
* Added support for VLAN set VID offload command.
* Added support for matching on packets withe Geneve tunnel header.
+ * Added hairpin support.
+ * Added ConnectX6-DX support.
+ * Flow engine selected based on RDMA Core library version.
+ DV flow engine selected if version is rdma-core-24.0 or higher.
+ Verbs flow engine selected otherwise.
* **Updated the AF_XDP PMD.**
Updated the AF_XDP PMD. The new features include:
* Enabled zero copy between application mempools and UMEM by enabling the
- XDP_UMEM_UNALIGNED_CHUNKS UMEM flag.
+ ``XDP_UMEM_UNALIGNED_CHUNKS UMEM`` flag.
+
+* **Added cryptodev asymmetric session-less operation.**
+
+ Added a session-less option to the cryptodev asymmetric structure. It works
+ the same way as symmetric crypto, and the corresponding transform is used
+ directly by the crypto operation.
* **Added Marvell NITROX symmetric crypto PMD.**
Added a symmetric crypto PMD for Marvell NITROX V security processor.
- See the :doc:`../cryptodevs/nitrox` guide for more details on this new
+ See the :doc:`../cryptodevs/nitrox` guide for more details on this new PMD.
* **Added asymmetric support to Marvell OCTEON TX crypto PMD.**
- Added support for asymmetric operations in Marvell OCTEON TX cypto PMD.
+ Added support for asymmetric operations to Marvell OCTEON TX crypto PMD.
Supports RSA and modexp operations.
-* **Added Marvell OCTEON TX2 crypto PMD**
+* **Added Marvell OCTEON TX2 crypto PMD.**
- Added a new PMD driver for h/w crypto offload block on ``OCTEON TX2`` SoC.
+ Added a new PMD driver for hardware crypto offload block on ``OCTEON TX2``
+ SoC.
See :doc:`../cryptodevs/octeontx2` for more details
* **Updated NXP crypto PMDs for PDCP support.**
- PDCP support is added to DPAA_SEC and DPAA2_SEC PMDs using rte_security APIs.
- Support is added for all sequence number sizes for control and user plane.
- Test application is updated for unit testing.
+ Added PDCP support to the DPAA_SEC and DPAA2_SEC PMDs using rte_security
+ APIs. Support has been added for all sequence number sizes for control and
+ user plane. Test and test-crypto-perf applications have been updated for
+ unit testing.
+
+* **Updated the AESNI-MB PMD.**
+
+ * Added support for intel-ipsec-mb version 0.53.
+
+* **Updated the AESNI-GCM PMD.**
+
+ * Added support for intel-ipsec-mb version 0.53.
+ * Added support for in-place chained mbufs with AES-GCM algorithm.
* **Enabled Single Pass GCM acceleration on QAT GEN3.**
* **Updated the Intel QuickAssist Technology (QAT) asymmetric crypto PMD.**
* Added support for asymmetric session-less operations.
- * Added support for RSA algorithm with pair (n, d) private key representation.
+ * Added support for RSA algorithm with pair ``(n, d)`` private key
+ representation.
* Added support for RSA algorithm with quintuple private key representation.
* **Updated the Intel QuickAssist Technology (QAT) compression PMD.**
* **Added external buffers support for dpdk-test-compress-perf tool.**
- Added a command line option to dpdk-test-compress-perf tool to allocate
- and use memory zones as external buffers instead of keeping the data directly
- in mbuf areas.
+ Added a command line option to the ``dpdk-test-compress-perf`` tool to
+ allocate and use memory zones as external buffers instead of keeping the
+ data directly in mbuf areas.
* **Updated the IPSec library.**
- Added SA Database API to ``librte_ipsec``. A new test-sad application is also
- introduced to evaluate and perform custom functional and performance tests
- for IPsec SAD implementation.
+ * Added Security Associations (SA) Database API to ``librte_ipsec``. A new
+ test-sad application has also been introduced to evaluate and perform
+ custom functional and performance tests for an IPsec SAD implementation.
+
+ * Support fragmented packets in inline crypto processing mode with fallback
+ ``lookaside-none`` session. Corresponding changes are also added in the
+ IPsec Security Gateway application.
* **Introduced FIFO for NTB PMD.**
Added eBPF JIT support for arm64 architecture to improve the eBPF program
performance.
-* **Updated testpmd.**
+* **Added RIB and FIB (Routing/Forwarding Information Base) libraries.**
+
+ Added Routing and Forwarding Information Base (RIB/FIB) libraries. RIB and
+ FIB can replace the LPM (Longest Prefix Match) library with better control
+ plane (RIB) performance. The data plane (FIB) can be extended with new
+ algorithms.
+
+* **Updated testpmd with a command for ptypes.**
* Added a console command to testpmd app, ``show port (port_id) ptypes`` which
gives ability to print port supported ptypes in different protocol layers.
+ * Packet type detection disabled by default for the supported PMDs.
+
+* **Added new l2fwd-event sample application.**
+
+ Added an example application ``l2fwd-event`` that adds event device support to
+ the traditional l2fwd example. It demonstrates usage of poll and event mode IO
+ mechanism under a single application.
+
+* **Added build support for Link Time Optimization.**
+
+ LTO is an optimization technique used by the compiler to perform whole
+ program analysis and optimization at link time. In order to do that
+ compilers store their internal representation of the source code that
+ the linker uses at the final stage of the compilation process.
+
+ See :doc:`../prog_guide/lto` for more information:
+
+* **Added IOVA as VA support for KNI.**
+
+ * Added IOVA = VA support for KNI. KNI can operate in IOVA = VA mode when
+ ``iova-mode=va`` EAL option is passed to the application or when bus IOVA
+ scheme is selected as RTE_IOVA_VA. This mode only works on Linux Kernel
+ versions 4.10.0 and above.
+
+ * Due to IOVA to KVA address translations, based on the KNI use case there
+ can be a performance impact. For mitigation, forcing IOVA to PA via EAL
+ ``--iova-mode=pa`` option can be used, IOVA_DC bus iommu scheme can also
+ result in IOVA as PA.
Removed Items
Also, make sure to start the actual text at the margin.
=========================================================
+* Removed library-level ABI versions. These have been replaced with a single
+ project-level ABI version for non-experimental libraries and an ABI version of
+ ``0`` for experimental libraries. Review the :doc:`../contributing/abi_policy`
+ and :doc:`../contributing/abi_versioning` guides for more information.
+
* Removed duplicated set of commands for Rx offload configuration from testpmd::
port config all crc-strip|scatter|rx-cksum|rx-timestamp|
hw-vlan|hw-vlan-filter|hw-vlan-strip|hw-vlan-extend on|off
- The testpmd commands set that can be used instead
- in order to enable or disable Rx offloading on all Rx queues of a port is::
+ The testpmd command set that can be used instead in order to enable or
+ disable Rx offloading on all Rx queues of a port is::
port config <port_id> rx_offload crc_strip|scatter|
ipv4_cksum|udp_cksum|tcp_cksum|timestamp|
* Removed AF_XDP pmd_zero copy vdev argument. Support is now auto-detected.
+* The following sample applications have been removed in this release:
+
+ * Exception Path
+ * L3 Forwarding in a Virtualization Environment
+ * Load Balancer
+ * Netmap Compatibility
+ * Quota and Watermark
+ * vhost-scsi
+
+* Removed arm64-dpaa2-* build config. arm64-dpaa-* can now build for both
+ dpaa and dpaa2 platforms.
+
API Changes
-----------
Also, make sure to start the actual text at the margin.
=========================================================
+* eal: made the ``lcore_config`` struct and global symbol private.
+
+* eal: removed the ``rte_cpu_check_supported`` function, replaced by
+ ``rte_cpu_is_supported`` since dpdk v17.08.
+
+* eal: removed the ``rte_malloc_virt2phy`` function, replaced by
+ ``rte_malloc_virt2iova`` since v17.11.
+
+* eal: made the ``rte_config`` struct and ``rte_eal_get_configuration``
+ function private.
+
+* mem: hid the internal ``malloc_heap`` structure and the
+ ``rte_malloc_heap.h`` header.
+
+* vfio: removed ``rte_vfio_dma_map`` and ``rte_vfio_dma_unmap`` that have
+ been marked as deprecated in release 19.05.
+ ``rte_vfio_container_dma_map`` and ``rte_vfio_container_dma_unmap`` can
+ be used as substitutes.
+
+* pci: removed the following functions deprecated since dpdk v17.11:
+
+ - ``eal_parse_pci_BDF`` replaced by ``rte_pci_addr_parse``
+ - ``eal_parse_pci_DomBDF`` replaced by ``rte_pci_addr_parse``
+ - ``rte_eal_compare_pci_addr`` replaced by ``rte_pci_addr_cmp``
+
+* The network structure ``esp_tail`` has been prefixed by ``rte_``.
+
+* The network definitions of PPPoE ethertypes have been prefixed by ``RTE_``.
+
+* The network structure for MPLS has been prefixed by ``rte_``.
+
* ethdev: changed ``rte_eth_dev_infos_get`` return value from ``void`` to
``int`` to provide a way to report various error conditions.
* ethdev: changed ``rte_eth_dev_owner_delete`` return value from ``void`` to
``int`` to provide a way to report various error conditions.
+* ethdev: The deprecated function ``rte_eth_dev_count`` was removed.
+ The function ``rte_eth_dev_count_avail`` is a drop-in replacement.
+ If the intent is to iterate over ports, ``RTE_ETH_FOREACH_*`` macros
+ are better port iterators.
+
+* ethdev: ``RTE_FLOW_ITEM_TYPE_META`` data endianness altered to host one.
+ Due to the new dynamic metadata field in mbuf is host-endian either, there
+ is a minor compatibility issue for applications in case of 32-bit values
+ supported.
+
+* ethdev: the tx_metadata mbuf field is moved to dynamic one.
+ ``PKT_TX_METADATA`` flag is replaced with ``PKT_TX_DYNF_METADATA``.
+ ``DEV_TX_OFFLOAD_MATCH_METADATA`` offload flag is removed, now metadata
+ support in PMD is engaged on dynamic field registration.
+
* event: The function ``rte_event_eth_tx_adapter_enqueue`` takes an additional
input as ``flags``. Flag ``RTE_EVENT_ETH_TX_ADAPTER_ENQUEUE_SAME_DEST`` which
has been introduced in this release is used when used when all the packets
- enqueued in the tx adapter are destined for the same Ethernet port & Tx queue.
+ enqueued in the Tx adapter are destined for the same Ethernet port ans Tx
+ queue.
+
+* sched: The pipe nodes configuration parameters such as number of pipes,
+ pipe queue sizes, pipe profiles, etc., are moved from port level structure
+ to subport level. This allows different subports of the same port to
+ have different configuration for the pipe nodes.
ABI Changes
Also, make sure to start the actual text at the margin.
=========================================================
+* policy: Please note the revisions to the :doc:`../contributing/abi_policy`
+ introducing major ABI versions, with DPDK 19.11 becoming the first major
+ version ``v20``. ABI changes to add new features continue to be permitted in
+ subsequent releases, with the condition that ABI compatibility with the major
+ ABI version is maintained.
+
+* net: The Ethernet address and other header definitions have changed
+ attributes. They have been modified to be aligned on 2-byte boundaries.
+ These changes should not impact normal usage because drivers naturally
+ align the Ethernet header on receive and all known encapsulations
+ preserve the alignment of the header.
+
+* security: The field ``replay_win_sz`` has been moved from the ipsec library
+ based ``rte_ipsec_sa_prm`` structure to security library based structure
+ ``rte_security_ipsec_xform``, which specify the anti-replay window size
+ to enable sequence replay attack handling.
+
+* ipsec: The field ``replay_win_sz`` has been removed from the structure
+ ``rte_ipsec_sa_prm`` as it has been added to the security library.
+
+* ethdev: Added 32-bit fields for maximum LRO aggregated packet size, in
+ struct ``rte_eth_dev_info`` for the port capability and in struct
+ ``rte_eth_rxmode`` for the port configuration.
+ Application should use the new field in struct ``rte_eth_rxmode`` to configure
+ the requested size.
+ PMD should use the new field in struct ``rte_eth_dev_info`` to report the
+ supported port capability.
+
Shared Library Versions
-----------------------
librte_compressdev.so.1
librte_cryptodev.so.8
librte_distributor.so.1
- librte_eal.so.11
+ + librte_eal.so.12
librte_efd.so.1
+ librte_ethdev.so.13
+ librte_eventdev.so.8
+ + librte_fib.so.1
librte_flow_classify.so.1
librte_gro.so.1
librte_gso.so.1
librte_hash.so.2
librte_ip_frag.so.1
- librte_ipsec.so.1
+ + librte_ipsec.so.2
librte_jobstats.so.1
librte_kni.so.2
librte_kvargs.so.1
librte_meter.so.3
librte_metrics.so.1
librte_net.so.1
- librte_pci.so.1
+ + librte_pci.so.2
librte_pdump.so.3
librte_pipeline.so.3
librte_pmd_bnxt.so.2
librte_port.so.3
librte_power.so.1
librte_rawdev.so.1
+ + librte_rib.so.1
librte_rcu.so.1
librte_reorder.so.1
librte_ring.so.2
- librte_sched.so.3
- librte_security.so.2
+ + librte_sched.so.4
+ + librte_security.so.3
librte_stack.so.1
librte_table.so.3
librte_timer.so.1
Also, make sure to start the actual text at the margin.
=========================================================
+* Intel\ |reg| platforms with Intel\ |reg| NICs combinations
+
+ * CPU
+
+ * Intel\ |reg| Atom\ |trade| CPU C3758 @ 2.20GHz
+ * Intel\ |reg| Atom\ |trade| CPU C3858 @ 2.00GHz
+ * Intel\ |reg| Atom\ |trade| CPU C3958 @ 2.00GHz
+ * Intel\ |reg| Xeon\ |reg| CPU D-1541 @ 2.10GHz
+ * Intel\ |reg| Xeon\ |reg| CPU D-1553N @ 2.30GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2680 0 @ 2.70GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2680 v2 @ 2.80GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2699 v3 @ 2.30GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2699 v4 @ 2.20GHz
+ * Intel\ |reg| Xeon\ |reg| Gold 6139 CPU @ 2.30GHz
+ * Intel\ |reg| Xeon\ |reg| Gold 6252N CPU @ 2.30GHz
+ * Intel\ |reg| Xeon\ |reg| Platinum 8180 CPU @ 2.50GHz
+ * Intel\ |reg| Xeon\ |reg| Platinum 8280M CPU @ 2.70GHz
+
+ * OS:
+
+ * CentOS 7.6
+ * Fedora 30
+ * FreeBSD 12.0
+ * Red Hat Enterprise Linux Server release 8.0
+ * Red Hat Enterprise Linux Server release 7.6
+ * Suse12SP3
+ * Ubuntu 14.04
+ * Ubuntu 16.04
+ * Ubuntu 16.10
+ * Ubuntu 18.04
+ * Ubuntu 19.04
+
+ * NICs:
+
+ * Intel\ |reg| Corporation Ethernet Controller E810-C for SFP (2x25G)
+
+ * Firmware version: 1.02 0x80002084 1.2538.0/1.02 0x80002082 1.2538.0
+ * Device id (pf): 8086:1593
+ * Driver version: 0.12.25 (ice)
+
+ * Intel\ |reg| Corporation Ethernet Controller E810-C for SFP (2x100G)
+
+ * Firmware version: 1.02 0x80002081 1.2538.0
+ * Device id (pf): 8086:1592
+ * Driver version: 0.12.25 (ice)
+
+ * Intel\ |reg| 82599ES 10 Gigabit Ethernet Controller
+
+ * Firmware version: 0x61bf0001
+ * Device id (pf/vf): 8086:10fb / 8086:10ed
+ * Driver version: 5.6.1 (ixgbe)
+
+ * Intel\ |reg| Corporation Ethernet Connection X552/X557-AT 10GBASE-T
+
+ * Firmware version: 0x800003e7
+ * Device id (pf/vf): 8086:15ad / 8086:15a8
+ * Driver version: 5.1.0 (ixgbe)
+
+ * Intel\ |reg| Corporation Ethernet Controller 10G X550T
+
+ * Firmware version: 0x80000482
+ * Device id (pf): 8086:1563
+ * Driver version: 5.6.1 (ixgbe)
+
+ * Intel\ |reg| Ethernet Converged Network Adapter X710-DA4 (4x10G)
+
+ * Firmware version: 7.00 0x80004cdb
+ * Device id (pf/vf): 8086:1572 / 8086:154c
+ * Driver version: 2.9.21 (i40e)
+
+ * Intel\ |reg| Corporation Ethernet Connection X722 for 10GbE SFP+ (4x10G)
+
+ * Firmware version: 4.10 0x80001a3c
+ * Device id (pf/vf): 8086:37d0 / 8086:37cd
+ * Driver version: 2.9.21 (i40e)
+
+ * Intel\ |reg| Ethernet Converged Network Adapter XXV710-DA2 (2x25G)
+
+ * Firmware version: 7.00 0x80004cf8
+ * Device id (pf/vf): 8086:158b / 8086:154c
+ * Driver version: 2.9.21 (i40e)
+
+ * Intel\ |reg| Ethernet Converged Network Adapter XL710-QDA2 (2X40G)
+
+ * Firmware version: 7.00 0x80004c97
+ * Device id (pf/vf): 8086:1583 / 8086:154c
+ * Driver version: 2.9.21 (i40e)
+
+ * Intel\ |reg| Corporation I350 Gigabit Network Connection
+
+ * Firmware version: 1.63, 0x80000cbc
+ * Device id (pf/vf): 8086:1521 / 8086:1520
+ * Driver version: 5.4.0-k (igb)
+
+ * Intel\ |reg| Corporation I210 Gigabit Network Connection
+
+ * Firmware version: 3.25, 0x800006eb
+ * Device id (pf): 8086:1533
+ * Driver version: 5.4.0-k(igb)
+
+* ARMv8 SoC combinations from Marvell (with integrated NICs)
+
+ * SoC:
+
+ * CN83xx, CN96xx, CN93xx
+
+ * OS (Based on Marvell OCTEON TX SDK-10.1.2.0):
+
+ * Arch Linux
+ * Buildroot 2018.11
+ * Ubuntu 16.04.1 LTS
+ * Ubuntu 16.10
+ * Ubuntu 18.04.1
+ * Ubuntu 19.04
+
+* Intel\ |reg| platforms with Mellanox\ |reg| NICs combinations
+
+ * CPU:
+
+ * Intel\ |reg| Xeon\ |reg| Gold 6154 CPU @ 3.00GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2697A v4 @ 2.60GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2697 v3 @ 2.60GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2680 v2 @ 2.80GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2650 v4 @ 2.20GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2640 @ 2.50GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2620 v4 @ 2.10GHz
+
+ * OS:
+
+ * Red Hat Enterprise Linux Server release 8.0 (Maipo)
+ * Red Hat Enterprise Linux Server release 7.7 (Maipo)
+ * Red Hat Enterprise Linux Server release 7.6 (Maipo)
+ * Red Hat Enterprise Linux Server release 7.5 (Maipo)
+ * Red Hat Enterprise Linux Server release 7.4 (Maipo)
+ * Red Hat Enterprise Linux Server release 7.3 (Maipo)
+ * Red Hat Enterprise Linux Server release 7.2 (Maipo)
+ * Ubuntu 19.04
+ * Ubuntu 18.10
+ * Ubuntu 18.04
+ * Ubuntu 16.04
+ * SUSE Linux Enterprise Server 15
+
+ * OFED:
+
+ * MLNX_OFED 4.6-1.0.1.1
+ * MLNX_OFED 4.7-1.0.0.1
+ * MLNX_OFED 4.7-3.1.9.0 and above
+
+ * upstream kernel:
+
+ * Linux 5.3 and above
+
+ * rdma-core:
+
+ * rdma-core-24.1-1 and above
+
+ * NICs:
+
+ * Mellanox\ |reg| ConnectX\ |reg|-3 Pro 40G MCX354A-FCC_Ax (2x40G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1007
+ * Firmware version: 2.42.5000
+
+ * Mellanox\ |reg| ConnectX\ |reg|-4 10G MCX4111A-XCAT (1x10G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.26.2032 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-4 10G MCX4121A-XCAT (2x10G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.26.2032 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-4 25G MCX4111A-ACAT (1x25G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.26.2032 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-4 25G MCX4121A-ACAT (2x25G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.26.2032 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-4 40G MCX4131A-BCAT/MCX413A-BCAT (1x40G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.26.2032 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-4 40G MCX415A-BCAT (1x40G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.26.2032 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-4 50G MCX4131A-GCAT/MCX413A-GCAT (1x50G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.26.2032 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-4 50G MCX414A-BCAT (2x50G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.26.2032 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-4 50G MCX415A-GCAT/MCX416A-BCAT/MCX416A-GCAT (2x50G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.26.2032 and above
+ * Firmware version: 12.26.2032 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-4 50G MCX415A-CCAT (1x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.26.2032 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-4 100G MCX416A-CCAT (2x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.26.2032 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-4 Lx 10G MCX4121A-XCAT (2x10G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1015
+ * Firmware version: 14.26.2032 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-4 Lx 25G MCX4121A-ACAT (2x25G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1015
+ * Firmware version: 14.26.2032 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-5 100G MCX556A-ECAT (2x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1017
+ * Firmware version: 16.26.2032 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-5 Ex EN 100G MCX516A-CDAT (2x100G)
+
+ * Host interface: PCI Express 4.0 x16
+ * Device ID: 15b3:1019
+ * Firmware version: 16.26.2032 and above
+
+* IBM Power 9 platforms with Mellanox\ |reg| NICs combinations
+
+ * CPU:
+
+ * POWER9 2.2 (pvr 004e 1202) 2300MHz
+
+ * OS:
+
+ * Ubuntu 18.04.1 LTS (Bionic Beaver)
+
+ * NICs:
+
+ * Mellanox\ |reg| ConnectX\ |reg|-5 100G MCX556A-ECAT (2x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1017
+ * Firmware version: 16.26.1040
+
+ * OFED:
+
+ * MLNX_OFED 4.7-1.0.0.2