#define BNX2X_PMD_VER_PREFIX "BNX2X PMD"
#define BNX2X_PMD_VERSION_MAJOR 1
#define BNX2X_PMD_VERSION_MINOR 0
-#define BNX2X_PMD_VERSION_REVISION 1
+#define BNX2X_PMD_VERSION_REVISION 5
#define BNX2X_PMD_VERSION_PATCH 1
static inline const char *
static void bnx2x_free_mem(struct bnx2x_softc *sc);
static int bnx2x_alloc_fw_stats_mem(struct bnx2x_softc *sc);
static void bnx2x_free_fw_stats_mem(struct bnx2x_softc *sc);
-static __attribute__ ((noinline))
+static __rte_noinline
int bnx2x_nic_load(struct bnx2x_softc *sc);
static int bnx2x_handle_sp_tq(struct bnx2x_softc *sc);
/* Caller must take care that strlen(mz_name) < RTE_MEMZONE_NAMESIZE */
z = rte_memzone_reserve_aligned(mz_name, (uint64_t) (size),
- rte_lcore_to_socket_id(rte_lcore_id()),
+ SOCKET_ID_ANY,
0, align);
if (z == NULL) {
PMD_DRV_LOG(ERR, "DMA alloc failed for %s", msg);
return rc;
}
-int
+static int
bnx2x_fill_accept_flags(struct bnx2x_softc *sc, uint32_t rx_mode,
- unsigned long *rx_accept_flags,
- unsigned long *tx_accept_flags)
+ unsigned long *rx_accept_flags,
+ unsigned long *tx_accept_flags)
{
/* Clear the flags first */
*rx_accept_flags = 0;
break;
+ case BNX2X_RX_MODE_ALLMULTI_PROMISC:
case BNX2X_RX_MODE_PROMISC:
/*
* According to deffinition of SI mode, iface in promisc mode
}
/* stop the controller */
-__attribute__ ((noinline))
+__rte_noinline
int
bnx2x_nic_unload(struct bnx2x_softc *sc, uint32_t unload_mode, uint8_t keep_link)
{
}
PMD_TX_LOG(DEBUG,
- "start bd: nbytes %d flags %x vlan %x\n",
+ "start bd: nbytes %d flags %x vlan %x",
tx_start_bd->nbytes,
tx_start_bd->bd_flags.as_bitfield,
tx_start_bd->vlan_or_ethertype);
bnx2x_set_requested_fc(sc);
- if (CHIP_REV_IS_SLOW(sc)) {
- uint32_t bond = CHIP_BOND_ID(sc);
- uint32_t feat = 0;
-
- if (CHIP_IS_E2(sc) && CHIP_IS_MODE_4_PORT(sc)) {
- feat |= ELINK_FEATURE_CONFIG_EMUL_DISABLE_BMAC;
- } else if (bond & 0x4) {
- if (CHIP_IS_E3(sc)) {
- feat |= ELINK_FEATURE_CONFIG_EMUL_DISABLE_XMAC;
- } else {
- feat |= ELINK_FEATURE_CONFIG_EMUL_DISABLE_BMAC;
- }
- } else if (bond & 0x8) {
- if (CHIP_IS_E3(sc)) {
- feat |= ELINK_FEATURE_CONFIG_EMUL_DISABLE_UMAC;
- } else {
- feat |= ELINK_FEATURE_CONFIG_EMUL_DISABLE_EMAC;
- }
- }
-
-/* disable EMAC for E3 and above */
- if (bond & 0x2) {
- feat |= ELINK_FEATURE_CONFIG_EMUL_DISABLE_EMAC;
- }
-
- sc->link_params.feature_config_flags |= feat;
- }
-
if (load_mode == LOAD_DIAG) {
lp->loopback_mode = ELINK_LOOPBACK_XGXS;
/* Prefer doing PHY loopback at 10G speed, if possible */
}
/* start the controller */
-static __attribute__ ((noinline))
+static __rte_noinline
int bnx2x_nic_load(struct bnx2x_softc *sc)
{
uint32_t val;