-/*-
- * BSD LICENSE
- *
- * Copyright (c) 2017 Intel Corporation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2017 Intel Corporation
*/
#ifndef _PMD_I40E_H_
*
*/
-#include <rte_ethdev.h>
+#include <rte_ethdev_driver.h>
/**
* Response sent back to i40e driver from user app after callback
*/
struct rte_pmd_i40e_mb_event_param {
uint16_t vfid; /**< Virtual Function number */
- uint16_t msg_type; /**< VF to PF message type, see i40e_virtchnl_ops */
+ uint16_t msg_type; /**< VF to PF message type, see virtchnl_ops */
uint16_t retval; /**< return value */
void *msg; /**< pointer to message */
uint16_t msglen; /**< length of the message */
enum rte_pmd_i40e_package_op {
RTE_PMD_I40E_PKG_OP_UNDEFINED = 0,
RTE_PMD_I40E_PKG_OP_WR_ADD, /**< load package and add to info list */
+ RTE_PMD_I40E_PKG_OP_WR_DEL, /**< load package and delete from info list */
+ RTE_PMD_I40E_PKG_OP_WR_ONLY, /**< load package without modifying info list */
RTE_PMD_I40E_PKG_OP_MAX = 32
};
-#define RTE_PMD_I40E_DDP_NAME_SIZE 32
+/**
+ * Types of package information.
+ */
+enum rte_pmd_i40e_package_info {
+ RTE_PMD_I40E_PKG_INFO_UNDEFINED = 0,
+ RTE_PMD_I40E_PKG_INFO_GLOBAL_HEADER,
+ RTE_PMD_I40E_PKG_INFO_GLOBAL_NOTES_SIZE,
+ RTE_PMD_I40E_PKG_INFO_GLOBAL_NOTES,
+ RTE_PMD_I40E_PKG_INFO_GLOBAL_MAX = 1024,
+ RTE_PMD_I40E_PKG_INFO_HEADER,
+ RTE_PMD_I40E_PKG_INFO_DEVID_NUM,
+ RTE_PMD_I40E_PKG_INFO_DEVID_LIST,
+ RTE_PMD_I40E_PKG_INFO_PROTOCOL_NUM,
+ RTE_PMD_I40E_PKG_INFO_PROTOCOL_LIST,
+ RTE_PMD_I40E_PKG_INFO_PCTYPE_NUM,
+ RTE_PMD_I40E_PKG_INFO_PCTYPE_LIST,
+ RTE_PMD_I40E_PKG_INFO_PTYPE_NUM,
+ RTE_PMD_I40E_PKG_INFO_PTYPE_LIST,
+ RTE_PMD_I40E_PKG_INFO_MAX = (int)0xFFFFFFFF
+};
+
+/**
+ * Option types of queue region.
+ */
+enum rte_pmd_i40e_queue_region_op {
+ RTE_PMD_I40E_RSS_QUEUE_REGION_UNDEFINED,
+ /** add queue region set */
+ RTE_PMD_I40E_RSS_QUEUE_REGION_SET,
+ /** add PF region pctype set */
+ RTE_PMD_I40E_RSS_QUEUE_REGION_FLOWTYPE_SET,
+ /** add queue region user priority set */
+ RTE_PMD_I40E_RSS_QUEUE_REGION_USER_PRIORITY_SET,
+ /**
+ * ALL configuration about queue region from up layer
+ * at first will only keep in DPDK software stored in driver,
+ * only after " FLUSH_ON ", it commit all configuration to HW.
+ * Because PMD had to set hardware configuration at a time, so
+ * it will record all up layer command at first.
+ */
+ RTE_PMD_I40E_RSS_QUEUE_REGION_ALL_FLUSH_ON,
+ /**
+ * "FLUSH_OFF " is just clean all configuration about queue
+ * region just now, and restore all to DPDK i40e driver default
+ * config when start up.
+ */
+ RTE_PMD_I40E_RSS_QUEUE_REGION_ALL_FLUSH_OFF,
+ RTE_PMD_I40E_RSS_QUEUE_REGION_INFO_GET,
+ RTE_PMD_I40E_RSS_QUEUE_REGION_OP_MAX
+};
+
+#define RTE_PMD_I40E_DDP_NAME_SIZE 32
+#define RTE_PMD_I40E_PCTYPE_MAX 64
+#define RTE_PMD_I40E_REGION_MAX_NUM 8
+#define RTE_PMD_I40E_MAX_USER_PRIORITY 8
/**
* Version for dynamic device personalization.
uint8_t draft;
};
+/**
+ * Device ID for dynamic device personalization.
+ */
+struct rte_pmd_i40e_ddp_device_id {
+ uint32_t vendor_dev_id;
+ uint32_t sub_vendor_dev_id;
+};
+
/**
* Profile information in profile info list.
*/
uint8_t name[RTE_PMD_I40E_DDP_NAME_SIZE];
};
+#define RTE_PMD_I40E_DDP_OWNER_UNKNOWN 0xFF
+
/**
* Profile information list returned from HW.
*/
struct rte_pmd_i40e_profile_info p_info[1];
};
+#define RTE_PMD_I40E_PROTO_NUM 6
+#define RTE_PMD_I40E_PROTO_UNUSED 0xFF
+
+/**
+ * Protocols information stored in profile
+ */
+struct rte_pmd_i40e_proto_info {
+ uint8_t proto_id;
+ char name[RTE_PMD_I40E_DDP_NAME_SIZE];
+};
+
+/**
+ * Packet classification/ packet type information stored in profile
+ */
+struct rte_pmd_i40e_ptype_info {
+ uint8_t ptype_id;
+ uint8_t protocols[RTE_PMD_I40E_PROTO_NUM];
+};
+
/**
* ptype mapping table only accept RTE_PTYPE_XXX or "user defined" ptype.
* A ptype with MSB set will be regarded as a user defined ptype.
uint32_t sw_ptype; /**< software defined packet type */
};
+/**
+ * Queue region related information.
+ */
+struct rte_pmd_i40e_queue_region_conf {
+ /** the region id for this configuration */
+ uint8_t region_id;
+ /** the pctype or hardware flowtype of packet,
+ * the specific index for each type has been defined
+ * in file i40e_type.h as enum i40e_filter_pctype.
+ */
+ uint8_t hw_flowtype;
+ /** the start queue index for this region */
+ uint8_t queue_start_index;
+ /** the total queue number of this queue region */
+ uint8_t queue_num;
+ /** the packet's user priority for this region */
+ uint8_t user_priority;
+};
+
+/* queue region info */
+struct rte_pmd_i40e_queue_region_info {
+ /** the region id for this configuration */
+ uint8_t region_id;
+ /** the start queue index for this region */
+ uint8_t queue_start_index;
+ /** the total queue number of this queue region */
+ uint8_t queue_num;
+ /** the total number of user priority for this region */
+ uint8_t user_priority_num;
+ /** the packet's user priority for this region */
+ uint8_t user_priority[RTE_PMD_I40E_MAX_USER_PRIORITY];
+ /** the total number of flowtype for this region */
+ uint8_t flowtype_num;
+ /**
+ * the pctype or hardware flowtype of packet,
+ * the specific index for each type has been defined
+ * in file i40e_type.h as enum i40e_filter_pctype.
+ */
+ uint8_t hw_flowtype[RTE_PMD_I40E_PCTYPE_MAX];
+};
+
+struct rte_pmd_i40e_queue_regions {
+ /** the total number of queue region for this port */
+ uint16_t queue_region_number;
+ struct rte_pmd_i40e_queue_region_info
+ region[RTE_PMD_I40E_REGION_MAX_NUM];
+};
+
+/**
+ * Behavior will be taken if raw packet template is matched.
+ */
+enum rte_pmd_i40e_pkt_template_behavior {
+ RTE_PMD_I40E_PKT_TEMPLATE_ACCEPT,
+ RTE_PMD_I40E_PKT_TEMPLATE_REJECT,
+ RTE_PMD_I40E_PKT_TEMPLATE_PASSTHRU,
+};
+
+/**
+ * Flow director report status
+ * It defines what will be reported if raw packet template is matched.
+ */
+enum rte_pmd_i40e_pkt_template_status {
+ /** report nothing */
+ RTE_PMD_I40E_PKT_TEMPLATE_NO_REPORT_STATUS,
+ /** only report FD ID */
+ RTE_PMD_I40E_PKT_TEMPLATE_REPORT_ID,
+ /** report FD ID and 4 flex bytes */
+ RTE_PMD_I40E_PKT_TEMPLATE_REPORT_ID_FLEX_4,
+ /** report 8 flex bytes */
+ RTE_PMD_I40E_PKT_TEMPLATE_REPORT_FLEX_8,
+};
+
+/**
+ * A structure used to define an action when raw packet template is matched.
+ */
+struct rte_pmd_i40e_pkt_template_action {
+ /** queue assigned to if raw packet template match */
+ uint16_t rx_queue;
+ /** behavior will be taken */
+ enum rte_pmd_i40e_pkt_template_behavior behavior;
+ /** status report option */
+ enum rte_pmd_i40e_pkt_template_status report_status;
+ /**
+ * If report_status is RTE_PMD_I40E_PKT_TEMPLATE_REPORT_ID_FLEX_4 or
+ * RTE_PMD_I40E_PKT_TEMPLATE_REPORT_FLEX_8, flex_off specifies
+ * where the reported flex bytes start from in flexible payload.
+ */
+ uint8_t flex_off;
+};
+
+/**
+ * A structure used to define the input for raw packet template.
+ */
+struct rte_pmd_i40e_pkt_template_input {
+ /** the pctype used for raw packet template */
+ uint16_t pctype;
+ /** the buffer conatining raw packet template */
+ void *packet;
+ /** the length of buffer with raw packet template */
+ uint32_t length;
+};
+
+/**
+ * A structure used to define the configuration parameters
+ * for raw packet template.
+ */
+struct rte_pmd_i40e_pkt_template_conf {
+ /** the input for raw packet template. */
+ struct rte_pmd_i40e_pkt_template_input input;
+ /** the action to be taken when raw packet template is matched */
+ struct rte_pmd_i40e_pkt_template_action action;
+ /** ID, an unique software index for the raw packet template filter */
+ uint32_t soft_id;
+};
+
+enum rte_pmd_i40e_inset_type {
+ INSET_NONE = 0,
+ INSET_HASH,
+ INSET_FDIR,
+ INSET_FDIR_FLX,
+};
+
+struct rte_pmd_i40e_inset_mask {
+ uint8_t field_idx;
+ uint16_t mask;
+};
+
+struct rte_pmd_i40e_inset {
+ uint64_t inset;
+ struct rte_pmd_i40e_inset_mask mask[2];
+};
+
+/**
+ * Add or remove raw packet template filter to Flow Director.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param conf
+ * Specifies configuration parameters of raw packet template filter.
+ * @param add
+ * Speicifes an action to be taken - add or remove raw packet template filter.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if *conf* invalid.
+ * - (-ENOTSUP) not supported by firmware.
+ */
+int rte_pmd_i40e_flow_add_del_packet_template(
+ uint16_t port,
+ const struct rte_pmd_i40e_pkt_template_conf *conf,
+ uint8_t add);
+
/**
* Notify VF when PF link status changes.
*
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if *vf* invalid.
*/
-int rte_pmd_i40e_ping_vfs(uint8_t port, uint16_t vf);
+int rte_pmd_i40e_ping_vfs(uint16_t port, uint16_t vf);
/**
* Enable/Disable VF MAC anti spoofing.
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_i40e_set_vf_mac_anti_spoof(uint8_t port,
+int rte_pmd_i40e_set_vf_mac_anti_spoof(uint16_t port,
uint16_t vf_id,
uint8_t on);
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_i40e_set_vf_vlan_anti_spoof(uint8_t port,
+int rte_pmd_i40e_set_vf_vlan_anti_spoof(uint16_t port,
uint16_t vf_id,
uint8_t on);
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_i40e_set_tx_loopback(uint8_t port,
+int rte_pmd_i40e_set_tx_loopback(uint16_t port,
uint8_t on);
/**
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_i40e_set_vf_unicast_promisc(uint8_t port,
+int rte_pmd_i40e_set_vf_unicast_promisc(uint16_t port,
uint16_t vf_id,
uint8_t on);
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_i40e_set_vf_multicast_promisc(uint8_t port,
+int rte_pmd_i40e_set_vf_multicast_promisc(uint16_t port,
uint16_t vf_id,
uint8_t on);
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if *vf* or *mac_addr* is invalid.
*/
-int rte_pmd_i40e_set_vf_mac_addr(uint8_t port, uint16_t vf_id,
+int rte_pmd_i40e_set_vf_mac_addr(uint16_t port, uint16_t vf_id,
struct ether_addr *mac_addr);
+/**
+ * Remove the VF MAC address.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf_id
+ * VF id.
+ * @param mac_addr
+ * VF MAC address.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if *vf* or *mac_addr* is invalid.
+ */
+int
+rte_pmd_i40e_remove_vf_mac_addr(uint16_t port, uint16_t vf_id,
+ struct ether_addr *mac_addr);
+
/**
* Enable/Disable vf vlan strip for all queues in a pool
*
* - (-EINVAL) if bad parameter.
*/
int
-rte_pmd_i40e_set_vf_vlan_stripq(uint8_t port, uint16_t vf, uint8_t on);
+rte_pmd_i40e_set_vf_vlan_stripq(uint16_t port, uint16_t vf, uint8_t on);
/**
* Enable/Disable vf vlan insert
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_i40e_set_vf_vlan_insert(uint8_t port, uint16_t vf_id,
+int rte_pmd_i40e_set_vf_vlan_insert(uint16_t port, uint16_t vf_id,
uint16_t vlan_id);
/**
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_i40e_set_vf_broadcast(uint8_t port, uint16_t vf_id,
+int rte_pmd_i40e_set_vf_broadcast(uint16_t port, uint16_t vf_id,
uint8_t on);
/**
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_i40e_set_vf_vlan_tag(uint8_t port, uint16_t vf_id, uint8_t on);
+int rte_pmd_i40e_set_vf_vlan_tag(uint16_t port, uint16_t vf_id, uint8_t on);
/**
* Enable/Disable VF VLAN filter
* - (-EINVAL) if bad parameter.
* - (-ENOTSUP) not supported by firmware.
*/
-int rte_pmd_i40e_set_vf_vlan_filter(uint8_t port, uint16_t vlan_id,
+int rte_pmd_i40e_set_vf_vlan_filter(uint16_t port, uint16_t vlan_id,
uint64_t vf_mask, uint8_t on);
/**
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_i40e_get_vf_stats(uint8_t port,
+int rte_pmd_i40e_get_vf_stats(uint16_t port,
uint16_t vf_id,
struct rte_eth_stats *stats);
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_i40e_reset_vf_stats(uint8_t port,
+int rte_pmd_i40e_reset_vf_stats(uint16_t port,
uint16_t vf_id);
/**
* - (-EINVAL) if bad parameter.
* - (-ENOTSUP) not supported by firmware.
*/
-int rte_pmd_i40e_set_vf_max_bw(uint8_t port,
+int rte_pmd_i40e_set_vf_max_bw(uint16_t port,
uint16_t vf_id,
uint32_t bw);
* - (-EINVAL) if bad parameter.
* - (-ENOTSUP) not supported by firmware.
*/
-int rte_pmd_i40e_set_vf_tc_bw_alloc(uint8_t port,
+int rte_pmd_i40e_set_vf_tc_bw_alloc(uint16_t port,
uint16_t vf_id,
uint8_t tc_num,
uint8_t *bw_weight);
* - (-EINVAL) if bad parameter.
* - (-ENOTSUP) not supported by firmware.
*/
-int rte_pmd_i40e_set_vf_tc_max_bw(uint8_t port,
+int rte_pmd_i40e_set_vf_tc_max_bw(uint16_t port,
uint16_t vf_id,
uint8_t tc_no,
uint32_t bw);
* - (-EINVAL) if bad parameter.
* - (-ENOTSUP) not supported by firmware.
*/
-int rte_pmd_i40e_set_tc_strict_prio(uint8_t port, uint8_t tc_map);
+int rte_pmd_i40e_set_tc_strict_prio(uint16_t port, uint8_t tc_map);
/**
* Load/Unload a ddp package
* - (0) if successful.
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
- * - (1) if profile exists.
+ * - (-EEXIST) if profile exists.
+ * - (-EACCES) if profile does not exist.
+ * - (-ENOTSUP) if operation not supported.
*/
-int rte_pmd_i40e_process_ddp_package(uint8_t port, uint8_t *buff,
+int rte_pmd_i40e_process_ddp_package(uint16_t port, uint8_t *buff,
uint32_t size,
enum rte_pmd_i40e_package_op op);
+/**
+ * rte_pmd_i40e_get_ddp_info - Get profile's info
+ * @param pkg
+ * buffer of package.
+ * @param pkg_size
+ * package buffer size
+ * @param info
+ * buffer for response
+ * @param size
+ * response buffer size
+ * @param type
+ * type of information requested
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if information type not supported by the profile.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_i40e_get_ddp_info(uint8_t *pkg, uint32_t pkg_size,
+ uint8_t *info, uint32_t size,
+ enum rte_pmd_i40e_package_info type);
+
/**
* rte_pmd_i40e_get_ddp_list - Get loaded profile list
* @param port
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_i40e_get_ddp_list(uint8_t port, uint8_t *buff, uint32_t size);
+int rte_pmd_i40e_get_ddp_list(uint16_t port, uint8_t *buff, uint32_t size);
/**
* Update hardware defined ptype to software defined packet type
* set other PTYPEs maps to PTYPE_UNKNOWN.
*/
int rte_pmd_i40e_ptype_mapping_update(
- uint8_t port,
+ uint16_t port,
struct rte_pmd_i40e_ptype_mapping *mapping_items,
uint16_t count,
uint8_t exclusive);
* @param port
* pointer to port identifier of the device
*/
-int rte_pmd_i40e_ptype_mapping_reset(uint8_t port);
+int rte_pmd_i40e_ptype_mapping_reset(uint16_t port);
/**
* Get hardware defined ptype to software defined ptype
* -(!0) only return mapping items which packet_type != RTE_PTYPE_UNKNOWN.
*/
int rte_pmd_i40e_ptype_mapping_get(
- uint8_t port,
+ uint16_t port,
struct rte_pmd_i40e_ptype_mapping *mapping_items,
uint16_t size,
uint16_t *count,
* @param pkt_type
* the new packet type to overwrite
*/
-int rte_pmd_i40e_ptype_mapping_replace(uint8_t port,
+int rte_pmd_i40e_ptype_mapping_replace(uint16_t port,
uint32_t target,
uint8_t mask,
uint32_t pkt_type);
+/**
+ * Add a VF MAC address.
+ *
+ * Add more MAC address for VF. The existing MAC addresses
+ * are still effective.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf_id
+ * VF id.
+ * @param mac_addr
+ * VF MAC address.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if *vf* or *mac_addr* is invalid.
+ */
+int rte_pmd_i40e_add_vf_mac_addr(uint16_t port, uint16_t vf_id,
+ struct ether_addr *mac_addr);
+
+#define RTE_PMD_I40E_PCTYPE_MAX 64
+#define RTE_PMD_I40E_FLOW_TYPE_MAX 64
+
+struct rte_pmd_i40e_flow_type_mapping {
+ uint16_t flow_type; /**< software defined flow type*/
+ uint64_t pctype; /**< hardware defined pctype */
+};
+
+/**
+ * Update hardware defined pctype to software defined flow type
+ * mapping table.
+ *
+ * @param port
+ * pointer to port identifier of the device.
+ * @param mapping_items
+ * the base address of the mapping items array.
+ * @param count
+ * number of mapping items.
+ * @param exclusive
+ * the flag indicate different pctype mapping update method.
+ * -(0) only overwrite referred PCTYPE mapping,
+ * keep other PCTYPEs mapping unchanged.
+ * -(!0) overwrite referred PCTYPE mapping,
+ * set other PCTYPEs maps to PCTYPE_INVALID.
+ */
+int rte_pmd_i40e_flow_type_mapping_update(
+ uint16_t port,
+ struct rte_pmd_i40e_flow_type_mapping *mapping_items,
+ uint16_t count,
+ uint8_t exclusive);
+
+/**
+ * Get software defined flow type to hardware defined pctype
+ * mapping items.
+ *
+ * @param port
+ * pointer to port identifier of the device.
+ * @param mapping_items
+ * the base address of the array to store returned items.
+ * array should be allocated by caller with minimum size of
+ * RTE_PMD_I40E_FLOW_TYPE_MAX items
+ */
+int rte_pmd_i40e_flow_type_mapping_get(
+ uint16_t port,
+ struct rte_pmd_i40e_flow_type_mapping *mapping_items);
+
+/**
+ * Reset hardware defined pctype to software defined flow type
+ * mapping table to default.
+ *
+ * @param port
+ * pointer to port identifier of the device
+ */
+int rte_pmd_i40e_flow_type_mapping_reset(uint16_t port);
+
+/**
+ * On the PF, find VF index based on VF MAC address
+ *
+ * @param port
+ * pointer to port identifier of the device
+ * @param vf_mac
+ * the mac address of the vf to determine index of
+ * @return
+ * The index of vfid If successful.
+ * -EINVAL: vf mac address does not exist for this port
+ * -ENOTSUP: i40e not supported for this port.
+ */
+int rte_pmd_i40e_query_vfid_by_mac(uint16_t port,
+ const struct ether_addr *vf_mac);
+
+/**
+ * Do RSS queue region configuration for that port as
+ * the command option type
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param op_type
+ * Queue region operation type
+ * @param arg
+ * Queue region operation type specific data
+ */
+int rte_pmd_i40e_rss_queue_region_conf(uint16_t port_id,
+ enum rte_pmd_i40e_queue_region_op op_type, void *arg);
+
+int rte_pmd_i40e_cfg_hash_inset(uint16_t port,
+ uint64_t pctype, uint64_t inset);
+
+/**
+ * Get input set
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param pctype
+ * HW pctype.
+ * @param inset
+ * Buffer for input set info.
+ * @param inset_type
+ * Type of input set.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ * - (-ENOTSUP) if operation not supported.
+ */
+int rte_pmd_i40e_inset_get(uint16_t port, uint8_t pctype,
+ struct rte_pmd_i40e_inset *inset,
+ enum rte_pmd_i40e_inset_type inset_type);
+
+/**
+ * Set input set
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param pctype
+ * HW pctype.
+ * @param inset
+ * Input set info.
+ * @param inset_type
+ * Type of input set.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ * - (-ENOTSUP) if operation not supported.
+ */
+int rte_pmd_i40e_inset_set(uint16_t port, uint8_t pctype,
+ struct rte_pmd_i40e_inset *inset,
+ enum rte_pmd_i40e_inset_type inset_type);
+
+/**
+ * Get bit value for some field index
+ *
+ * @param inset
+ * Input set value.
+ * @param field_idx
+ * Field index for input set.
+ * @return
+ * - (1) if set.
+ * - (0) if cleared.
+ */
+static inline int
+rte_pmd_i40e_inset_field_get(uint64_t inset, uint8_t field_idx)
+{
+ uint8_t bit_idx;
+
+ if (field_idx > 63)
+ return 0;
+
+ bit_idx = 63 - field_idx;
+ if (inset & (1ULL << bit_idx))
+ return 1;
+
+ return 0;
+}
+
+/**
+ * Set bit value for some field index
+ *
+ * @param inset
+ * Input set value.
+ * @param field_idx
+ * Field index for input set.
+ * @return
+ * - (-1) if failed.
+ * - (0) if success.
+ */
+static inline int
+rte_pmd_i40e_inset_field_set(uint64_t *inset, uint8_t field_idx)
+{
+ uint8_t bit_idx;
+
+ if (field_idx > 63)
+ return -1;
+
+ bit_idx = 63 - field_idx;
+ *inset = *inset | (1ULL << bit_idx);
+
+ return 0;
+}
+
+/**
+ * Clear bit value for some field index
+ *
+ * @param inset
+ * Input set value.
+ * @param field_idx
+ * Field index for input set.
+ * @return
+ * - (-1) if failed.
+ * - (0) if success.
+ */
+static inline int
+rte_pmd_i40e_inset_field_clear(uint64_t *inset, uint8_t field_idx)
+{
+ uint8_t bit_idx;
+
+ if (field_idx > 63)
+ return -1;
+
+ bit_idx = 63 - field_idx;
+ *inset = *inset & ~(1ULL << bit_idx);
+
+ return 0;
+}
+
#endif /* _PMD_I40E_H_ */