-/*-
- * BSD LICENSE
- *
- * Copyright 2015 6WIND S.A.
- * Copyright 2015 Mellanox.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of 6WIND S.A. nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2015 6WIND S.A.
+ * Copyright 2015 Mellanox Technologies, Ltd
*/
-#define _GNU_SOURCE
-
#include <stddef.h>
#include <assert.h>
+#include <inttypes.h>
#include <unistd.h>
+#include <stdbool.h>
#include <stdint.h>
#include <stdio.h>
#include <string.h>
#include <net/if.h>
#include <sys/ioctl.h>
#include <sys/socket.h>
-#include <sys/utsname.h>
#include <netinet/in.h>
#include <linux/ethtool.h>
#include <linux/sockios.h>
-#include <linux/version.h>
#include <fcntl.h>
#include <stdalign.h>
#include <sys/un.h>
+#include <time.h>
#include <rte_atomic.h>
#include <rte_ethdev_driver.h>
#include <rte_mbuf.h>
#include <rte_common.h>
#include <rte_interrupts.h>
-#include <rte_alarm.h>
#include <rte_malloc.h>
+#include <rte_string_fns.h>
+#include <rte_rwlock.h>
+#include <rte_cycles.h>
#include "mlx5.h"
+#include "mlx5_glue.h"
#include "mlx5_rxtx.h"
#include "mlx5_utils.h"
+/* Supported speed values found in /usr/include/linux/ethtool.h */
+#ifndef HAVE_SUPPORTED_40000baseKR4_Full
+#define SUPPORTED_40000baseKR4_Full (1 << 23)
+#endif
+#ifndef HAVE_SUPPORTED_40000baseCR4_Full
+#define SUPPORTED_40000baseCR4_Full (1 << 24)
+#endif
+#ifndef HAVE_SUPPORTED_40000baseSR4_Full
+#define SUPPORTED_40000baseSR4_Full (1 << 25)
+#endif
+#ifndef HAVE_SUPPORTED_40000baseLR4_Full
+#define SUPPORTED_40000baseLR4_Full (1 << 26)
+#endif
+#ifndef HAVE_SUPPORTED_56000baseKR4_Full
+#define SUPPORTED_56000baseKR4_Full (1 << 27)
+#endif
+#ifndef HAVE_SUPPORTED_56000baseCR4_Full
+#define SUPPORTED_56000baseCR4_Full (1 << 28)
+#endif
+#ifndef HAVE_SUPPORTED_56000baseSR4_Full
+#define SUPPORTED_56000baseSR4_Full (1 << 29)
+#endif
+#ifndef HAVE_SUPPORTED_56000baseLR4_Full
+#define SUPPORTED_56000baseLR4_Full (1 << 30)
+#endif
+
/* Add defines in case the running kernel is not the same as user headers. */
#ifndef ETHTOOL_GLINKSETTINGS
struct ethtool_link_settings {
#endif
/**
- * Get interface name from private structure.
+ * Get master interface name from private structure.
*
- * @param[in] priv
- * Pointer to private structure.
+ * @param[in] dev
+ * Pointer to Ethernet device.
* @param[out] ifname
* Interface name output buffer.
*
* @return
- * 0 on success, -1 on failure and errno is set.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
-priv_get_ifname(const struct priv *priv, char (*ifname)[IF_NAMESIZE])
+mlx5_get_master_ifname(const char *ibdev_path, char (*ifname)[IF_NAMESIZE])
{
DIR *dir;
struct dirent *dent;
unsigned int dev_port_prev = ~0u;
char match[IF_NAMESIZE] = "";
+ assert(ibdev_path);
{
- MKSTR(path, "%s/device/net", priv->ibdev_path);
+ MKSTR(path, "%s/device/net", ibdev_path);
dir = opendir(path);
- if (dir == NULL)
- return -1;
+ if (dir == NULL) {
+ rte_errno = errno;
+ return -rte_errno;
+ }
}
while ((dent = readdir(dir)) != NULL) {
char *name = dent->d_name;
continue;
MKSTR(path, "%s/device/net/%s/%s",
- priv->ibdev_path, name,
+ ibdev_path, name,
(dev_type ? "dev_id" : "dev_port"));
file = fopen(path, "rb");
if (dev_port == dev_port_prev)
goto try_dev_id;
dev_port_prev = dev_port;
- if (dev_port == (priv->port - 1u))
- snprintf(match, sizeof(match), "%s", name);
+ if (dev_port == 0)
+ strlcpy(match, name, sizeof(match));
}
closedir(dir);
- if (match[0] == '\0')
- return -1;
+ if (match[0] == '\0') {
+ rte_errno = ENOENT;
+ return -rte_errno;
+ }
strncpy(*ifname, match, sizeof(*ifname));
return 0;
}
/**
- * Check if the counter is located on ib counters file.
- *
- * @param[in] cntr
- * Counter name.
- *
- * @return
- * 1 if counter is located on ib counters file , 0 otherwise.
- */
-int
-priv_is_ib_cntr(const char *cntr)
-{
- if (!strcmp(cntr, "out_of_buffer"))
- return 1;
- return 0;
-}
-
-/**
- * Read from sysfs entry.
- *
- * @param[in] priv
- * Pointer to private structure.
- * @param[in] entry
- * Entry name relative to sysfs path.
- * @param[out] buf
- * Data output buffer.
- * @param size
- * Buffer size.
- *
- * @return
- * 0 on success, -1 on failure and errno is set.
- */
-static int
-priv_sysfs_read(const struct priv *priv, const char *entry,
- char *buf, size_t size)
-{
- char ifname[IF_NAMESIZE];
- FILE *file;
- int ret;
- int err;
-
- if (priv_get_ifname(priv, &ifname))
- return -1;
-
- if (priv_is_ib_cntr(entry)) {
- MKSTR(path, "%s/ports/1/hw_counters/%s",
- priv->ibdev_path, entry);
- file = fopen(path, "rb");
- } else {
- MKSTR(path, "%s/device/net/%s/%s",
- priv->ibdev_path, ifname, entry);
- file = fopen(path, "rb");
- }
- if (file == NULL)
- return -1;
- ret = fread(buf, 1, size, file);
- err = errno;
- if (((size_t)ret < size) && (ferror(file)))
- ret = -1;
- else
- ret = size;
- fclose(file);
- errno = err;
- return ret;
-}
-
-/**
- * Write to sysfs entry.
- *
- * @param[in] priv
- * Pointer to private structure.
- * @param[in] entry
- * Entry name relative to sysfs path.
- * @param[in] buf
- * Data buffer.
- * @param size
- * Buffer size.
+ * Get interface name from private structure.
*
- * @return
- * 0 on success, -1 on failure and errno is set.
- */
-static int
-priv_sysfs_write(const struct priv *priv, const char *entry,
- char *buf, size_t size)
-{
- char ifname[IF_NAMESIZE];
- FILE *file;
- int ret;
- int err;
-
- if (priv_get_ifname(priv, &ifname))
- return -1;
-
- MKSTR(path, "%s/device/net/%s/%s", priv->ibdev_path, ifname, entry);
-
- file = fopen(path, "wb");
- if (file == NULL)
- return -1;
- ret = fwrite(buf, 1, size, file);
- err = errno;
- if (((size_t)ret < size) || (ferror(file)))
- ret = -1;
- else
- ret = size;
- fclose(file);
- errno = err;
- return ret;
-}
-
-/**
- * Get unsigned long sysfs property.
+ * This is a port representor-aware version of mlx5_get_master_ifname().
*
- * @param priv
- * Pointer to private structure.
- * @param[in] name
- * Entry name relative to sysfs path.
- * @param[out] value
- * Value output buffer.
+ * @param[in] dev
+ * Pointer to Ethernet device.
+ * @param[out] ifname
+ * Interface name output buffer.
*
* @return
- * 0 on success, -1 on failure and errno is set.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
-static int
-priv_get_sysfs_ulong(struct priv *priv, const char *name, unsigned long *value)
+int
+mlx5_get_ifname(const struct rte_eth_dev *dev, char (*ifname)[IF_NAMESIZE])
{
- int ret;
- unsigned long value_ret;
- char value_str[32];
-
- ret = priv_sysfs_read(priv, name, value_str, (sizeof(value_str) - 1));
- if (ret == -1) {
- DEBUG("cannot read %s value from sysfs: %s",
- name, strerror(errno));
- return -1;
- }
- value_str[ret] = '\0';
- errno = 0;
- value_ret = strtoul(value_str, NULL, 0);
- if (errno) {
- DEBUG("invalid %s value `%s': %s", name, value_str,
- strerror(errno));
- return -1;
+ struct mlx5_priv *priv = dev->data->dev_private;
+ unsigned int ifindex;
+
+ assert(priv);
+ assert(priv->sh);
+ ifindex = mlx5_ifindex(dev);
+ if (!ifindex) {
+ if (!priv->representor)
+ return mlx5_get_master_ifname(priv->sh->ibdev_path,
+ ifname);
+ rte_errno = ENXIO;
+ return -rte_errno;
}
- *value = value_ret;
- return 0;
+ if (if_indextoname(ifindex, &(*ifname)[0]))
+ return 0;
+ rte_errno = errno;
+ return -rte_errno;
}
/**
- * Set unsigned long sysfs property.
+ * Get the interface index from device name.
*
- * @param priv
- * Pointer to private structure.
- * @param[in] name
- * Entry name relative to sysfs path.
- * @param value
- * Value to set.
+ * @param[in] dev
+ * Pointer to Ethernet device.
*
* @return
- * 0 on success, -1 on failure and errno is set.
+ * Nonzero interface index on success, zero otherwise and rte_errno is set.
*/
-static int
-priv_set_sysfs_ulong(struct priv *priv, const char *name, unsigned long value)
+unsigned int
+mlx5_ifindex(const struct rte_eth_dev *dev)
{
- int ret;
- MKSTR(value_str, "%lu", value);
-
- ret = priv_sysfs_write(priv, name, value_str, (sizeof(value_str) - 1));
- if (ret == -1) {
- DEBUG("cannot write %s `%s' (%lu) to sysfs: %s",
- name, value_str, value, strerror(errno));
- return -1;
- }
- return 0;
+ struct mlx5_priv *priv = dev->data->dev_private;
+ unsigned int ifindex;
+
+ assert(priv);
+ assert(priv->if_index);
+ ifindex = priv->if_index;
+ if (!ifindex)
+ rte_errno = ENXIO;
+ return ifindex;
}
/**
* Perform ifreq ioctl() on associated Ethernet device.
*
- * @param[in] priv
- * Pointer to private structure.
+ * @param[in] dev
+ * Pointer to Ethernet device.
* @param req
* Request number to pass to ioctl().
* @param[out] ifr
* Interface request structure output buffer.
*
* @return
- * 0 on success, -1 on failure and errno is set.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
-priv_ifreq(const struct priv *priv, int req, struct ifreq *ifr)
+mlx5_ifreq(const struct rte_eth_dev *dev, int req, struct ifreq *ifr)
{
int sock = socket(PF_INET, SOCK_DGRAM, IPPROTO_IP);
- int ret = -1;
+ int ret = 0;
- if (sock == -1)
- return ret;
- if (priv_get_ifname(priv, &ifr->ifr_name) == 0)
- ret = ioctl(sock, req, ifr);
+ if (sock == -1) {
+ rte_errno = errno;
+ return -rte_errno;
+ }
+ ret = mlx5_get_ifname(dev, &ifr->ifr_name);
+ if (ret)
+ goto error;
+ ret = ioctl(sock, req, ifr);
+ if (ret == -1) {
+ rte_errno = errno;
+ goto error;
+ }
close(sock);
- return ret;
-}
-
-/**
- * Return the number of active VFs for the current device.
- *
- * @param[in] priv
- * Pointer to private structure.
- * @param[out] num_vfs
- * Number of active VFs.
- *
- * @return
- * 0 on success, -1 on failure and errno is set.
- */
-int
-priv_get_num_vfs(struct priv *priv, uint16_t *num_vfs)
-{
- /* The sysfs entry name depends on the operating system. */
- const char **name = (const char *[]){
- "device/sriov_numvfs",
- "device/mlx5_num_vfs",
- NULL,
- };
- int ret;
-
- do {
- unsigned long ulong_num_vfs;
-
- ret = priv_get_sysfs_ulong(priv, *name, &ulong_num_vfs);
- if (!ret)
- *num_vfs = ulong_num_vfs;
- } while (*(++name) && ret);
- return ret;
+ return 0;
+error:
+ close(sock);
+ return -rte_errno;
}
/**
* Get device MTU.
*
- * @param priv
- * Pointer to private structure.
+ * @param dev
+ * Pointer to Ethernet device.
* @param[out] mtu
* MTU value output buffer.
*
* @return
- * 0 on success, -1 on failure and errno is set.
- */
-int
-priv_get_mtu(struct priv *priv, uint16_t *mtu)
-{
- unsigned long ulong_mtu;
-
- if (priv_get_sysfs_ulong(priv, "mtu", &ulong_mtu) == -1)
- return -1;
- *mtu = ulong_mtu;
- return 0;
-}
-
-/**
- * Read device counter from sysfs.
- *
- * @param priv
- * Pointer to private structure.
- * @param name
- * Counter name.
- * @param[out] cntr
- * Counter output buffer.
- *
- * @return
- * 0 on success, -1 on failure and errno is set.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
-priv_get_cntr_sysfs(struct priv *priv, const char *name, uint64_t *cntr)
+mlx5_get_mtu(struct rte_eth_dev *dev, uint16_t *mtu)
{
- unsigned long ulong_ctr;
+ struct ifreq request;
+ int ret = mlx5_ifreq(dev, SIOCGIFMTU, &request);
- if (priv_get_sysfs_ulong(priv, name, &ulong_ctr) == -1)
- return -1;
- *cntr = ulong_ctr;
+ if (ret)
+ return ret;
+ *mtu = request.ifr_mtu;
return 0;
}
/**
* Set device MTU.
*
- * @param priv
- * Pointer to private structure.
+ * @param dev
+ * Pointer to Ethernet device.
* @param mtu
* MTU value to set.
*
* @return
- * 0 on success, -1 on failure and errno is set.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
-priv_set_mtu(struct priv *priv, uint16_t mtu)
+mlx5_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
{
- uint16_t new_mtu;
+ struct ifreq request = { .ifr_mtu = mtu, };
- if (priv_set_sysfs_ulong(priv, "mtu", mtu) ||
- priv_get_mtu(priv, &new_mtu))
- return -1;
- if (new_mtu == mtu)
- return 0;
- errno = EINVAL;
- return -1;
+ return mlx5_ifreq(dev, SIOCSIFMTU, &request);
}
/**
* Set device flags.
*
- * @param priv
- * Pointer to private structure.
+ * @param dev
+ * Pointer to Ethernet device.
* @param keep
* Bitmask for flags that must remain untouched.
* @param flags
* Bitmask for flags to modify.
*
* @return
- * 0 on success, -1 on failure and errno is set.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
-priv_set_flags(struct priv *priv, unsigned int keep, unsigned int flags)
+mlx5_set_flags(struct rte_eth_dev *dev, unsigned int keep, unsigned int flags)
{
- unsigned long tmp;
+ struct ifreq request;
+ int ret = mlx5_ifreq(dev, SIOCGIFFLAGS, &request);
- if (priv_get_sysfs_ulong(priv, "flags", &tmp) == -1)
- return -1;
- tmp &= keep;
- tmp |= (flags & (~keep));
- return priv_set_sysfs_ulong(priv, "flags", tmp);
+ if (ret)
+ return ret;
+ request.ifr_flags &= keep;
+ request.ifr_flags |= flags & ~keep;
+ return mlx5_ifreq(dev, SIOCSIFFLAGS, &request);
}
/**
- * Ethernet device configuration.
- *
- * Prepare the driver for a given number of TX and RX queues.
+ * DPDK callback for Ethernet device configuration.
*
* @param dev
* Pointer to Ethernet device structure.
*
* @return
- * 0 on success, errno value on failure.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
-static int
-dev_configure(struct rte_eth_dev *dev)
+int
+mlx5_dev_configure(struct rte_eth_dev *dev)
{
- struct priv *priv = dev->data->dev_private;
+ struct mlx5_priv *priv = dev->data->dev_private;
unsigned int rxqs_n = dev->data->nb_rx_queues;
unsigned int txqs_n = dev->data->nb_tx_queues;
unsigned int i;
unsigned int reta_idx_n;
const uint8_t use_app_rss_key =
!!dev->data->dev_conf.rx_adv_conf.rss_conf.rss_key;
- uint64_t supp_tx_offloads = mlx5_priv_get_tx_port_offloads(priv);
- uint64_t tx_offloads = dev->data->dev_conf.txmode.offloads;
- uint64_t supp_rx_offloads =
- (mlx5_priv_get_rx_port_offloads(priv) |
- mlx5_priv_get_rx_queue_offloads(priv));
- uint64_t rx_offloads = dev->data->dev_conf.rxmode.offloads;
-
- if ((tx_offloads & supp_tx_offloads) != tx_offloads) {
- ERROR("Some Tx offloads are not supported "
- "requested 0x%" PRIx64 " supported 0x%" PRIx64,
- tx_offloads, supp_tx_offloads);
- return ENOTSUP;
- }
- if ((rx_offloads & supp_rx_offloads) != rx_offloads) {
- ERROR("Some Rx offloads are not supported "
- "requested 0x%" PRIx64 " supported 0x%" PRIx64,
- rx_offloads, supp_rx_offloads);
- return ENOTSUP;
- }
+ int ret = 0;
+
if (use_app_rss_key &&
(dev->data->dev_conf.rx_adv_conf.rss_conf.rss_key_len !=
- rss_hash_default_key_len)) {
- /* MLX5 RSS only support 40bytes key. */
- return EINVAL;
+ MLX5_RSS_HASH_KEY_LEN)) {
+ DRV_LOG(ERR, "port %u RSS key len must be %s Bytes long",
+ dev->data->port_id, RTE_STR(MLX5_RSS_HASH_KEY_LEN));
+ rte_errno = EINVAL;
+ return -rte_errno;
}
priv->rss_conf.rss_key =
rte_realloc(priv->rss_conf.rss_key,
- rss_hash_default_key_len, 0);
+ MLX5_RSS_HASH_KEY_LEN, 0);
if (!priv->rss_conf.rss_key) {
- ERROR("cannot allocate RSS hash key memory (%u)", rxqs_n);
- return ENOMEM;
+ DRV_LOG(ERR, "port %u cannot allocate RSS hash key memory (%u)",
+ dev->data->port_id, rxqs_n);
+ rte_errno = ENOMEM;
+ return -rte_errno;
}
memcpy(priv->rss_conf.rss_key,
use_app_rss_key ?
dev->data->dev_conf.rx_adv_conf.rss_conf.rss_key :
rss_hash_default_key,
- rss_hash_default_key_len);
- priv->rss_conf.rss_key_len = rss_hash_default_key_len;
+ MLX5_RSS_HASH_KEY_LEN);
+ priv->rss_conf.rss_key_len = MLX5_RSS_HASH_KEY_LEN;
priv->rss_conf.rss_hf = dev->data->dev_conf.rx_adv_conf.rss_conf.rss_hf;
priv->rxqs = (void *)dev->data->rx_queues;
priv->txqs = (void *)dev->data->tx_queues;
if (txqs_n != priv->txqs_n) {
- INFO("%p: TX queues number update: %u -> %u",
- (void *)dev, priv->txqs_n, txqs_n);
+ DRV_LOG(INFO, "port %u Tx queues number update: %u -> %u",
+ dev->data->port_id, priv->txqs_n, txqs_n);
priv->txqs_n = txqs_n;
}
if (rxqs_n > priv->config.ind_table_max_size) {
- ERROR("cannot handle this many RX queues (%u)", rxqs_n);
- return EINVAL;
+ DRV_LOG(ERR, "port %u cannot handle this many Rx queues (%u)",
+ dev->data->port_id, rxqs_n);
+ rte_errno = EINVAL;
+ return -rte_errno;
}
- if (rxqs_n == priv->rxqs_n)
- return 0;
- INFO("%p: RX queues number update: %u -> %u",
- (void *)dev, priv->rxqs_n, rxqs_n);
- priv->rxqs_n = rxqs_n;
- /* If the requested number of RX queues is not a power of two, use the
- * maximum indirection table size for better balancing.
- * The result is always rounded to the next power of two. */
- reta_idx_n = (1 << log2above((rxqs_n & (rxqs_n - 1)) ?
- priv->config.ind_table_max_size :
- rxqs_n));
- if (priv_rss_reta_index_resize(priv, reta_idx_n))
- return ENOMEM;
- /* When the number of RX queues is not a power of two, the remaining
- * table entries are padded with reused WQs and hashes are not spread
- * uniformly. */
- for (i = 0, j = 0; (i != reta_idx_n); ++i) {
- (*priv->reta_idx)[i] = j;
- if (++j == rxqs_n)
- j = 0;
+ if (rxqs_n != priv->rxqs_n) {
+ DRV_LOG(INFO, "port %u Rx queues number update: %u -> %u",
+ dev->data->port_id, priv->rxqs_n, rxqs_n);
+ priv->rxqs_n = rxqs_n;
+ /*
+ * If the requested number of RX queues is not a power of two,
+ * use the maximum indirection table size for better balancing.
+ * The result is always rounded to the next power of two.
+ */
+ reta_idx_n = (1 << log2above((rxqs_n & (rxqs_n - 1)) ?
+ priv->config.ind_table_max_size :
+ rxqs_n));
+ ret = mlx5_rss_reta_index_resize(dev, reta_idx_n);
+ if (ret)
+ return ret;
+ /*
+ * When the number of RX queues is not a power of two,
+ * the remaining table entries are padded with reused WQs
+ * and hashes are not spread uniformly.
+ */
+ for (i = 0, j = 0; (i != reta_idx_n); ++i) {
+ (*priv->reta_idx)[i] = j;
+ if (++j == rxqs_n)
+ j = 0;
+ }
}
+ ret = mlx5_proc_priv_init(dev);
+ if (ret)
+ return ret;
return 0;
}
/**
- * DPDK callback for Ethernet device configuration.
+ * Sets default tuning parameters.
*
* @param dev
- * Pointer to Ethernet device structure.
- *
- * @return
- * 0 on success, negative errno value on failure.
+ * Pointer to Ethernet device.
+ * @param[out] info
+ * Info structure output buffer.
*/
-int
-mlx5_dev_configure(struct rte_eth_dev *dev)
+static void
+mlx5_set_default_params(struct rte_eth_dev *dev, struct rte_eth_dev_info *info)
{
- struct priv *priv = dev->data->dev_private;
- int ret;
+ struct mlx5_priv *priv = dev->data->dev_private;
+
+ /* Minimum CPU utilization. */
+ info->default_rxportconf.ring_size = 256;
+ info->default_txportconf.ring_size = 256;
+ info->default_rxportconf.burst_size = 64;
+ info->default_txportconf.burst_size = 64;
+ if (priv->link_speed_capa & ETH_LINK_SPEED_100G) {
+ info->default_rxportconf.nb_queues = 16;
+ info->default_txportconf.nb_queues = 16;
+ if (dev->data->nb_rx_queues > 2 ||
+ dev->data->nb_tx_queues > 2) {
+ /* Max Throughput. */
+ info->default_rxportconf.ring_size = 2048;
+ info->default_txportconf.ring_size = 2048;
+ }
+ } else {
+ info->default_rxportconf.nb_queues = 8;
+ info->default_txportconf.nb_queues = 8;
+ if (dev->data->nb_rx_queues > 2 ||
+ dev->data->nb_tx_queues > 2) {
+ /* Max Throughput. */
+ info->default_rxportconf.ring_size = 4096;
+ info->default_txportconf.ring_size = 4096;
+ }
+ }
+}
- priv_lock(priv);
- ret = dev_configure(dev);
- assert(ret >= 0);
- priv_unlock(priv);
- return -ret;
+/**
+ * Sets tx mbuf limiting parameters.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param[out] info
+ * Info structure output buffer.
+ */
+static void
+mlx5_set_txlimit_params(struct rte_eth_dev *dev, struct rte_eth_dev_info *info)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_dev_config *config = &priv->config;
+ unsigned int inlen;
+ uint16_t nb_max;
+
+ inlen = (config->txq_inline_max == MLX5_ARG_UNSET) ?
+ MLX5_SEND_DEF_INLINE_LEN :
+ (unsigned int)config->txq_inline_max;
+ assert(config->txq_inline_min >= 0);
+ inlen = RTE_MAX(inlen, (unsigned int)config->txq_inline_min);
+ inlen = RTE_MIN(inlen, MLX5_WQE_SIZE_MAX +
+ MLX5_ESEG_MIN_INLINE_SIZE -
+ MLX5_WQE_CSEG_SIZE -
+ MLX5_WQE_ESEG_SIZE -
+ MLX5_WQE_DSEG_SIZE * 2);
+ nb_max = (MLX5_WQE_SIZE_MAX +
+ MLX5_ESEG_MIN_INLINE_SIZE -
+ MLX5_WQE_CSEG_SIZE -
+ MLX5_WQE_ESEG_SIZE -
+ MLX5_WQE_DSEG_SIZE -
+ inlen) / MLX5_WSEG_SIZE;
+ info->tx_desc_lim.nb_seg_max = nb_max;
+ info->tx_desc_lim.nb_mtu_seg_max = nb_max;
}
/**
* @param[out] info
* Info structure output buffer.
*/
-void
+int
mlx5_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *info)
{
- struct priv *priv = dev->data->dev_private;
+ struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_dev_config *config = &priv->config;
unsigned int max;
- char ifname[IF_NAMESIZE];
- info->pci_dev = RTE_ETH_DEV_TO_PCI(dev);
-
- priv_lock(priv);
/* FIXME: we should ask the device for these values. */
info->min_rx_bufsize = 32;
info->max_rx_pktlen = 65536;
* Since we need one CQ per QP, the limit is the minimum number
* between the two values.
*/
- max = RTE_MIN(priv->device_attr.orig_attr.max_cq,
- priv->device_attr.orig_attr.max_qp);
+ max = RTE_MIN(priv->sh->device_attr.orig_attr.max_cq,
+ priv->sh->device_attr.orig_attr.max_qp);
/* If max >= 65535 then max = 0, max_rx_queues is uint16_t. */
if (max >= 65535)
max = 65535;
info->max_rx_queues = max;
info->max_tx_queues = max;
- info->max_mac_addrs = RTE_DIM(priv->mac);
- info->rx_queue_offload_capa =
- mlx5_priv_get_rx_queue_offloads(priv);
- info->rx_offload_capa = (mlx5_priv_get_rx_port_offloads(priv) |
+ info->max_mac_addrs = MLX5_MAX_UC_MAC_ADDRESSES;
+ info->rx_queue_offload_capa = mlx5_get_rx_queue_offloads(dev);
+ info->rx_offload_capa = (mlx5_get_rx_port_offloads() |
info->rx_queue_offload_capa);
- info->tx_offload_capa = mlx5_priv_get_tx_port_offloads(priv);
- if (priv_get_ifname(priv, &ifname) == 0)
- info->if_index = if_nametoindex(ifname);
+ info->tx_offload_capa = mlx5_get_tx_port_offloads(dev);
+ info->if_index = mlx5_ifindex(dev);
info->reta_size = priv->reta_idx_n ?
priv->reta_idx_n : config->ind_table_max_size;
- info->hash_key_size = priv->rss_conf.rss_key_len;
+ info->hash_key_size = MLX5_RSS_HASH_KEY_LEN;
info->speed_capa = priv->link_speed_capa;
info->flow_type_rss_offloads = ~MLX5_RSS_HF_MASK;
- priv_unlock(priv);
+ mlx5_set_default_params(dev, info);
+ mlx5_set_txlimit_params(dev, info);
+ info->switch_info.name = dev->data->name;
+ info->switch_info.domain_id = priv->domain_id;
+ info->switch_info.port_id = priv->representor_id;
+ if (priv->representor) {
+ uint16_t port_id;
+
+ if (priv->pf_bond >= 0) {
+ /*
+ * Switch port ID is opaque value with driver defined
+ * format. Push the PF index in bonding configurations
+ * in upper four bits of port ID. If we get too many
+ * representors (more than 4K) or PFs (more than 15)
+ * this approach must be reconsidered.
+ */
+ if ((info->switch_info.port_id >>
+ MLX5_PORT_ID_BONDING_PF_SHIFT) ||
+ priv->pf_bond > MLX5_PORT_ID_BONDING_PF_MASK) {
+ DRV_LOG(ERR, "can't update switch port ID"
+ " for bonding device");
+ assert(false);
+ return -ENODEV;
+ }
+ info->switch_info.port_id |=
+ priv->pf_bond << MLX5_PORT_ID_BONDING_PF_SHIFT;
+ }
+ MLX5_ETH_FOREACH_DEV(port_id, priv->pci_dev) {
+ struct mlx5_priv *opriv =
+ rte_eth_devices[port_id].data->dev_private;
+
+ if (!opriv ||
+ opriv->representor ||
+ opriv->sh != priv->sh ||
+ opriv->domain_id != priv->domain_id)
+ continue;
+ /*
+ * Override switch name with that of the master
+ * device.
+ */
+ info->switch_info.name = opriv->dev_data->name;
+ break;
+ }
+ }
+ return 0;
+}
+
+/**
+ * Get device current raw clock counter
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param[out] time
+ * Current raw clock counter of the device.
+ *
+ * @return
+ * 0 if the clock has correctly been read
+ * The value of errno in case of error
+ */
+int
+mlx5_read_clock(struct rte_eth_dev *dev, uint64_t *clock)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct ibv_context *ctx = priv->sh->ctx;
+ struct ibv_values_ex values;
+ int err = 0;
+
+ values.comp_mask = IBV_VALUES_MASK_RAW_CLOCK;
+ err = mlx5_glue->query_rt_values_ex(ctx, &values);
+ if (err != 0) {
+ DRV_LOG(WARNING, "Could not query the clock !");
+ return err;
+ }
+ *clock = values.raw_clock.tv_nsec;
+ return 0;
+}
+
+/**
+ * Get firmware version of a device.
+ *
+ * @param dev
+ * Ethernet device port.
+ * @param fw_ver
+ * String output allocated by caller.
+ * @param fw_size
+ * Size of the output string, including terminating null byte.
+ *
+ * @return
+ * 0 on success, or the size of the non truncated string if too big.
+ */
+int mlx5_fw_version_get(struct rte_eth_dev *dev, char *fw_ver, size_t fw_size)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct ibv_device_attr *attr = &priv->sh->device_attr.orig_attr;
+ size_t size = strnlen(attr->fw_ver, sizeof(attr->fw_ver)) + 1;
+
+ if (fw_size < size)
+ return size;
+ if (fw_ver != NULL)
+ strlcpy(fw_ver, attr->fw_ver, fw_size);
+ return 0;
}
+/**
+ * Get supported packet types.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ *
+ * @return
+ * A pointer to the supported Packet types array.
+ */
const uint32_t *
mlx5_dev_supported_ptypes_get(struct rte_eth_dev *dev)
{
};
if (dev->rx_pkt_burst == mlx5_rx_burst ||
+ dev->rx_pkt_burst == mlx5_rx_burst_mprq ||
dev->rx_pkt_burst == mlx5_rx_burst_vec)
return ptypes;
return NULL;
}
+/**
+ * Retrieve the master device for representor in the same switch domain.
+ *
+ * @param dev
+ * Pointer to representor Ethernet device structure.
+ *
+ * @return
+ * Master device structure on success, NULL otherwise.
+ */
+
+static struct rte_eth_dev *
+mlx5_find_master_dev(struct rte_eth_dev *dev)
+{
+ struct mlx5_priv *priv;
+ uint16_t port_id;
+ uint16_t domain_id;
+
+ priv = dev->data->dev_private;
+ domain_id = priv->domain_id;
+ assert(priv->representor);
+ MLX5_ETH_FOREACH_DEV(port_id, priv->pci_dev) {
+ struct mlx5_priv *opriv =
+ rte_eth_devices[port_id].data->dev_private;
+ if (opriv &&
+ opriv->master &&
+ opriv->domain_id == domain_id &&
+ opriv->sh == priv->sh)
+ return &rte_eth_devices[port_id];
+ }
+ return NULL;
+}
+
/**
* DPDK callback to retrieve physical link information.
*
* @param dev
* Pointer to Ethernet device structure.
- * @param wait_to_complete
- * Wait for request completion (ignored).
+ * @param[out] link
+ * Storage for current link status.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
-mlx5_link_update_unlocked_gset(struct rte_eth_dev *dev, int wait_to_complete)
+mlx5_link_update_unlocked_gset(struct rte_eth_dev *dev,
+ struct rte_eth_link *link)
{
- struct priv *priv = dev->data->dev_private;
+ struct mlx5_priv *priv = dev->data->dev_private;
struct ethtool_cmd edata = {
.cmd = ETHTOOL_GSET /* Deprecated since Linux v4.5. */
};
struct ifreq ifr;
struct rte_eth_link dev_link;
int link_speed = 0;
+ int ret;
- /* priv_lock() is not taken to allow concurrent calls. */
-
- (void)wait_to_complete;
- if (priv_ifreq(priv, SIOCGIFFLAGS, &ifr)) {
- WARN("ioctl(SIOCGIFFLAGS) failed: %s", strerror(errno));
- return -1;
+ ret = mlx5_ifreq(dev, SIOCGIFFLAGS, &ifr);
+ if (ret) {
+ DRV_LOG(WARNING, "port %u ioctl(SIOCGIFFLAGS) failed: %s",
+ dev->data->port_id, strerror(rte_errno));
+ return ret;
}
- memset(&dev_link, 0, sizeof(dev_link));
- dev_link.link_status = ((ifr.ifr_flags & IFF_UP) &&
- (ifr.ifr_flags & IFF_RUNNING));
- ifr.ifr_data = (void *)&edata;
- if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
- WARN("ioctl(SIOCETHTOOL, ETHTOOL_GSET) failed: %s",
- strerror(errno));
- return -1;
+ dev_link = (struct rte_eth_link) {
+ .link_status = ((ifr.ifr_flags & IFF_UP) &&
+ (ifr.ifr_flags & IFF_RUNNING)),
+ };
+ ifr = (struct ifreq) {
+ .ifr_data = (void *)&edata,
+ };
+ ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr);
+ if (ret) {
+ if (ret == -ENOTSUP && priv->representor) {
+ struct rte_eth_dev *master;
+
+ /*
+ * For representors we can try to inherit link
+ * settings from the master device. Actually
+ * link settings do not make a lot of sense
+ * for representors due to missing physical
+ * link. The old kernel drivers supported
+ * emulated settings query for representors,
+ * the new ones do not, so we have to add
+ * this code for compatibility issues.
+ */
+ master = mlx5_find_master_dev(dev);
+ if (master) {
+ ifr = (struct ifreq) {
+ .ifr_data = (void *)&edata,
+ };
+ ret = mlx5_ifreq(master, SIOCETHTOOL, &ifr);
+ }
+ }
+ if (ret) {
+ DRV_LOG(WARNING,
+ "port %u ioctl(SIOCETHTOOL,"
+ " ETHTOOL_GSET) failed: %s",
+ dev->data->port_id, strerror(rte_errno));
+ return ret;
+ }
}
link_speed = ethtool_cmd_speed(&edata);
if (link_speed == -1)
- dev_link.link_speed = 0;
+ dev_link.link_speed = ETH_SPEED_NUM_NONE;
else
dev_link.link_speed = link_speed;
priv->link_speed_capa = 0;
ETH_LINK_HALF_DUPLEX : ETH_LINK_FULL_DUPLEX);
dev_link.link_autoneg = !(dev->data->dev_conf.link_speeds &
ETH_LINK_SPEED_FIXED);
- if (memcmp(&dev_link, &dev->data->dev_link, sizeof(dev_link))) {
- /* Link status changed. */
- dev->data->dev_link = dev_link;
- return 0;
+ if (((dev_link.link_speed && !dev_link.link_status) ||
+ (!dev_link.link_speed && dev_link.link_status))) {
+ rte_errno = EAGAIN;
+ return -rte_errno;
}
- /* Link status is still the same. */
- return -1;
+ *link = dev_link;
+ return 0;
}
/**
*
* @param dev
* Pointer to Ethernet device structure.
- * @param wait_to_complete
- * Wait for request completion (ignored).
+ * @param[out] link
+ * Storage for current link status.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
-mlx5_link_update_unlocked_gs(struct rte_eth_dev *dev, int wait_to_complete)
+mlx5_link_update_unlocked_gs(struct rte_eth_dev *dev,
+ struct rte_eth_link *link)
+
{
- struct priv *priv = dev->data->dev_private;
+ struct mlx5_priv *priv = dev->data->dev_private;
struct ethtool_link_settings gcmd = { .cmd = ETHTOOL_GLINKSETTINGS };
struct ifreq ifr;
struct rte_eth_link dev_link;
+ struct rte_eth_dev *master = NULL;
uint64_t sc;
+ int ret;
- (void)wait_to_complete;
- if (priv_ifreq(priv, SIOCGIFFLAGS, &ifr)) {
- WARN("ioctl(SIOCGIFFLAGS) failed: %s", strerror(errno));
- return -1;
+ ret = mlx5_ifreq(dev, SIOCGIFFLAGS, &ifr);
+ if (ret) {
+ DRV_LOG(WARNING, "port %u ioctl(SIOCGIFFLAGS) failed: %s",
+ dev->data->port_id, strerror(rte_errno));
+ return ret;
}
- memset(&dev_link, 0, sizeof(dev_link));
- dev_link.link_status = ((ifr.ifr_flags & IFF_UP) &&
- (ifr.ifr_flags & IFF_RUNNING));
- ifr.ifr_data = (void *)&gcmd;
- if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
- DEBUG("ioctl(SIOCETHTOOL, ETHTOOL_GLINKSETTINGS) failed: %s",
- strerror(errno));
- return -1;
+ dev_link = (struct rte_eth_link) {
+ .link_status = ((ifr.ifr_flags & IFF_UP) &&
+ (ifr.ifr_flags & IFF_RUNNING)),
+ };
+ ifr = (struct ifreq) {
+ .ifr_data = (void *)&gcmd,
+ };
+ ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr);
+ if (ret) {
+ if (ret == -ENOTSUP && priv->representor) {
+ /*
+ * For representors we can try to inherit link
+ * settings from the master device. Actually
+ * link settings do not make a lot of sense
+ * for representors due to missing physical
+ * link. The old kernel drivers supported
+ * emulated settings query for representors,
+ * the new ones do not, so we have to add
+ * this code for compatibility issues.
+ */
+ master = mlx5_find_master_dev(dev);
+ if (master) {
+ ifr = (struct ifreq) {
+ .ifr_data = (void *)&gcmd,
+ };
+ ret = mlx5_ifreq(master, SIOCETHTOOL, &ifr);
+ }
+ }
+ if (ret) {
+ DRV_LOG(DEBUG,
+ "port %u ioctl(SIOCETHTOOL,"
+ " ETHTOOL_GLINKSETTINGS) failed: %s",
+ dev->data->port_id, strerror(rte_errno));
+ return ret;
+ }
+
}
gcmd.link_mode_masks_nwords = -gcmd.link_mode_masks_nwords;
*ecmd = gcmd;
ifr.ifr_data = (void *)ecmd;
- if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
- DEBUG("ioctl(SIOCETHTOOL, ETHTOOL_GLINKSETTINGS) failed: %s",
- strerror(errno));
- return -1;
+ ret = mlx5_ifreq(master ? master : dev, SIOCETHTOOL, &ifr);
+ if (ret) {
+ DRV_LOG(DEBUG,
+ "port %u ioctl(SIOCETHTOOL,"
+ "ETHTOOL_GLINKSETTINGS) failed: %s",
+ dev->data->port_id, strerror(rte_errno));
+ return ret;
}
- dev_link.link_speed = ecmd->speed;
+ dev_link.link_speed = (ecmd->speed == UINT32_MAX) ? ETH_SPEED_NUM_NONE :
+ ecmd->speed;
sc = ecmd->link_mode_masks[0] |
((uint64_t)ecmd->link_mode_masks[1] << 32);
priv->link_speed_capa = 0;
ETH_LINK_HALF_DUPLEX : ETH_LINK_FULL_DUPLEX);
dev_link.link_autoneg = !(dev->data->dev_conf.link_speeds &
ETH_LINK_SPEED_FIXED);
- if (memcmp(&dev_link, &dev->data->dev_link, sizeof(dev_link))) {
- /* Link status changed. */
- dev->data->dev_link = dev_link;
- return 0;
+ if (((dev_link.link_speed && !dev_link.link_status) ||
+ (!dev_link.link_speed && dev_link.link_status))) {
+ rte_errno = EAGAIN;
+ return -rte_errno;
}
- /* Link status is still the same. */
- return -1;
+ *link = dev_link;
+ return 0;
}
/**
- * Enable receiving and transmitting traffic.
- *
- * @param priv
- * Pointer to private structure.
- */
-static void
-priv_link_start(struct priv *priv)
-{
- struct rte_eth_dev *dev = priv->dev;
- int err;
-
- dev->tx_pkt_burst = priv_select_tx_function(priv, dev);
- dev->rx_pkt_burst = priv_select_rx_function(priv, dev);
- err = priv_dev_traffic_enable(priv, dev);
- if (err)
- ERROR("%p: error occurred while configuring control flows: %s",
- (void *)priv, strerror(err));
- err = priv_flow_start(priv, &priv->flows);
- if (err)
- ERROR("%p: error occurred while configuring flows: %s",
- (void *)priv, strerror(err));
-}
-
-/**
- * Disable receiving and transmitting traffic.
- *
- * @param priv
- * Pointer to private structure.
- */
-static void
-priv_link_stop(struct priv *priv)
-{
- struct rte_eth_dev *dev = priv->dev;
-
- priv_flow_stop(priv, &priv->flows);
- priv_dev_traffic_disable(priv, dev);
- dev->rx_pkt_burst = removed_rx_burst;
- dev->tx_pkt_burst = removed_tx_burst;
-}
-
-/**
- * Retrieve physical link information and update rx/tx_pkt_burst callbacks
- * accordingly.
- *
- * @param priv
- * Pointer to private structure.
- * @param wait_to_complete
- * Wait for request completion (ignored).
- */
-int
-priv_link_update(struct priv *priv, int wait_to_complete)
-{
- struct rte_eth_dev *dev = priv->dev;
- struct utsname utsname;
- int ver[3];
- int ret;
- struct rte_eth_link dev_link = dev->data->dev_link;
-
- if (uname(&utsname) == -1 ||
- sscanf(utsname.release, "%d.%d.%d",
- &ver[0], &ver[1], &ver[2]) != 3 ||
- KERNEL_VERSION(ver[0], ver[1], ver[2]) < KERNEL_VERSION(4, 9, 0))
- ret = mlx5_link_update_unlocked_gset(dev, wait_to_complete);
- else
- ret = mlx5_link_update_unlocked_gs(dev, wait_to_complete);
- /* If lsc interrupt is disabled, should always be ready for traffic. */
- if (!dev->data->dev_conf.intr_conf.lsc) {
- priv_link_start(priv);
- return ret;
- }
- /* Re-select burst callbacks only if link status has been changed. */
- if (!ret && dev_link.link_status != dev->data->dev_link.link_status) {
- if (dev->data->dev_link.link_status == ETH_LINK_UP)
- priv_link_start(priv);
- else
- priv_link_stop(priv);
- }
- return ret;
-}
-
-/**
- * DPDK callback to retrieve physical link information.
+ * DPDK callback to retrieve physical link information.
*
* @param dev
* Pointer to Ethernet device structure.
* @param wait_to_complete
- * Wait for request completion (ignored).
+ * Wait for request completion.
+ *
+ * @return
+ * 0 if link status was not updated, positive if it was, a negative errno
+ * value otherwise and rte_errno is set.
*/
int
mlx5_link_update(struct rte_eth_dev *dev, int wait_to_complete)
{
- struct priv *priv = dev->data->dev_private;
int ret;
+ struct rte_eth_link dev_link;
+ time_t start_time = time(NULL);
+ int retry = MLX5_GET_LINK_STATUS_RETRY_COUNT;
- priv_lock(priv);
- ret = priv_link_update(priv, wait_to_complete);
- priv_unlock(priv);
+ do {
+ ret = mlx5_link_update_unlocked_gs(dev, &dev_link);
+ if (ret == -ENOTSUP)
+ ret = mlx5_link_update_unlocked_gset(dev, &dev_link);
+ if (ret == 0)
+ break;
+ /* Handle wait to complete situation. */
+ if ((wait_to_complete || retry) && ret == -EAGAIN) {
+ if (abs((int)difftime(time(NULL), start_time)) <
+ MLX5_LINK_STATUS_TIMEOUT) {
+ usleep(0);
+ continue;
+ } else {
+ rte_errno = EBUSY;
+ return -rte_errno;
+ }
+ } else if (ret < 0) {
+ return ret;
+ }
+ } while (wait_to_complete || retry-- > 0);
+ ret = !!memcmp(&dev->data->dev_link, &dev_link,
+ sizeof(struct rte_eth_link));
+ dev->data->dev_link = dev_link;
return ret;
}
* New MTU.
*
* @return
- * 0 on success, negative errno value on failure.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
{
- struct priv *priv = dev->data->dev_private;
- uint16_t kern_mtu;
- int ret = 0;
+ struct mlx5_priv *priv = dev->data->dev_private;
+ uint16_t kern_mtu = 0;
+ int ret;
- priv_lock(priv);
- ret = priv_get_mtu(priv, &kern_mtu);
+ ret = mlx5_get_mtu(dev, &kern_mtu);
if (ret)
- goto out;
+ return ret;
/* Set kernel interface MTU first. */
- ret = priv_set_mtu(priv, mtu);
+ ret = mlx5_set_mtu(dev, mtu);
if (ret)
- goto out;
- ret = priv_get_mtu(priv, &kern_mtu);
+ return ret;
+ ret = mlx5_get_mtu(dev, &kern_mtu);
if (ret)
- goto out;
+ return ret;
if (kern_mtu == mtu) {
priv->mtu = mtu;
- DEBUG("adapter port %u MTU set to %u", priv->port, mtu);
+ DRV_LOG(DEBUG, "port %u adapter MTU set to %u",
+ dev->data->port_id, mtu);
+ return 0;
}
- priv_unlock(priv);
- return 0;
-out:
- ret = errno;
- WARN("cannot set port %u MTU to %u: %s", priv->port, mtu,
- strerror(ret));
- priv_unlock(priv);
- assert(ret >= 0);
- return -ret;
+ rte_errno = EAGAIN;
+ return -rte_errno;
}
/**
* Flow control output buffer.
*
* @return
- * 0 on success, negative errno value on failure.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_dev_get_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
{
- struct priv *priv = dev->data->dev_private;
struct ifreq ifr;
struct ethtool_pauseparam ethpause = {
.cmd = ETHTOOL_GPAUSEPARAM
int ret;
ifr.ifr_data = (void *)ðpause;
- priv_lock(priv);
- if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
- ret = errno;
- WARN("ioctl(SIOCETHTOOL, ETHTOOL_GPAUSEPARAM)"
- " failed: %s",
- strerror(ret));
- goto out;
+ ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr);
+ if (ret) {
+ DRV_LOG(WARNING,
+ "port %u ioctl(SIOCETHTOOL, ETHTOOL_GPAUSEPARAM) failed:"
+ " %s",
+ dev->data->port_id, strerror(rte_errno));
+ return ret;
}
-
fc_conf->autoneg = ethpause.autoneg;
if (ethpause.rx_pause && ethpause.tx_pause)
fc_conf->mode = RTE_FC_FULL;
fc_conf->mode = RTE_FC_TX_PAUSE;
else
fc_conf->mode = RTE_FC_NONE;
- ret = 0;
-
-out:
- priv_unlock(priv);
- assert(ret >= 0);
- return -ret;
+ return 0;
}
/**
* Flow control parameters.
*
* @return
- * 0 on success, negative errno value on failure.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_dev_set_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
{
- struct priv *priv = dev->data->dev_private;
struct ifreq ifr;
struct ethtool_pauseparam ethpause = {
.cmd = ETHTOOL_SPAUSEPARAM
ethpause.tx_pause = 1;
else
ethpause.tx_pause = 0;
-
- priv_lock(priv);
- if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
- ret = errno;
- WARN("ioctl(SIOCETHTOOL, ETHTOOL_SPAUSEPARAM)"
- " failed: %s",
- strerror(ret));
- goto out;
+ ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr);
+ if (ret) {
+ DRV_LOG(WARNING,
+ "port %u ioctl(SIOCETHTOOL, ETHTOOL_SPAUSEPARAM)"
+ " failed: %s",
+ dev->data->port_id, strerror(rte_errno));
+ return ret;
}
- ret = 0;
-
-out:
- priv_unlock(priv);
- assert(ret >= 0);
- return -ret;
+ return 0;
}
/**
- * Get PCI information from struct ibv_device.
+ * Get PCI information by sysfs device path.
*
- * @param device
- * Pointer to Ethernet device structure.
+ * @param dev_path
+ * Pointer to device sysfs folder name.
* @param[out] pci_addr
* PCI bus address output buffer.
*
* @return
- * 0 on success, -1 on failure and errno is set.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
-mlx5_ibv_device_to_pci_addr(const struct ibv_device *device,
- struct rte_pci_addr *pci_addr)
+mlx5_dev_to_pci_addr(const char *dev_path,
+ struct rte_pci_addr *pci_addr)
{
FILE *file;
char line[32];
- MKSTR(path, "%s/device/uevent", device->ibdev_path);
+ MKSTR(path, "%s/device/uevent", dev_path);
file = fopen(path, "rb");
- if (file == NULL)
- return -1;
+ if (file == NULL) {
+ rte_errno = errno;
+ return -rte_errno;
+ }
while (fgets(line, sizeof(line), file) == line) {
size_t len = strlen(line);
int ret;
}
/**
- * Update the link status.
- *
- * @param priv
- * Pointer to private structure.
+ * Handle asynchronous removal event for entire multiport device.
*
- * @return
- * Zero if the callback process can be called immediately.
+ * @param sh
+ * Infiniband device shared context.
*/
-static int
-priv_link_status_update(struct priv *priv)
+static void
+mlx5_dev_interrupt_device_fatal(struct mlx5_ibv_shared *sh)
{
- struct rte_eth_link *link = &priv->dev->data->dev_link;
+ uint32_t i;
- priv_link_update(priv, 0);
- if (((link->link_speed == 0) && link->link_status) ||
- ((link->link_speed != 0) && !link->link_status)) {
- /*
- * Inconsistent status. Event likely occurred before the
- * kernel netdevice exposes the new status.
- */
- if (!priv->pending_alarm) {
- priv->pending_alarm = 1;
- rte_eal_alarm_set(MLX5_ALARM_TIMEOUT_US,
- mlx5_dev_link_status_handler,
- priv->dev);
+ for (i = 0; i < sh->max_port; ++i) {
+ struct rte_eth_dev *dev;
+
+ if (sh->port[i].ih_port_id >= RTE_MAX_ETHPORTS) {
+ /*
+ * Or not existing port either no
+ * handler installed for this port.
+ */
+ continue;
}
- return 1;
- } else if (unlikely(priv->pending_alarm)) {
- /* Link interrupt occurred while alarm is already scheduled. */
- priv->pending_alarm = 0;
- rte_eal_alarm_cancel(mlx5_dev_link_status_handler, priv->dev);
+ dev = &rte_eth_devices[sh->port[i].ih_port_id];
+ assert(dev);
+ if (dev->data->dev_conf.intr_conf.rmv)
+ _rte_eth_dev_callback_process
+ (dev, RTE_ETH_EVENT_INTR_RMV, NULL);
}
- return 0;
}
/**
- * Device status handler.
- *
- * @param priv
- * Pointer to private structure.
- * @param events
- * Pointer to event flags holder.
+ * Handle shared asynchronous events the NIC (removal event
+ * and link status change). Supports multiport IB device.
*
- * @return
- * Events bitmap of callback process which can be called immediately.
+ * @param cb_arg
+ * Callback argument.
*/
-static uint32_t
-priv_dev_status_handler(struct priv *priv)
+void
+mlx5_dev_interrupt_handler(void *cb_arg)
{
+ struct mlx5_ibv_shared *sh = cb_arg;
struct ibv_async_event event;
- uint32_t ret = 0;
- /* Read all message and acknowledge them. */
+ /* Read all message from the IB device and acknowledge them. */
for (;;) {
- if (ibv_get_async_event(priv->ctx, &event))
+ struct rte_eth_dev *dev;
+ uint32_t tmp;
+
+ if (mlx5_glue->get_async_event(sh->ctx, &event))
break;
+ /* Retrieve and check IB port index. */
+ tmp = (uint32_t)event.element.port_num;
+ if (!tmp && event.event_type == IBV_EVENT_DEVICE_FATAL) {
+ /*
+ * The DEVICE_FATAL event is called once for
+ * entire device without port specifying.
+ * We should notify all existing ports.
+ */
+ mlx5_glue->ack_async_event(&event);
+ mlx5_dev_interrupt_device_fatal(sh);
+ continue;
+ }
+ assert(tmp && (tmp <= sh->max_port));
+ if (!tmp) {
+ /* Unsupported devive level event. */
+ mlx5_glue->ack_async_event(&event);
+ DRV_LOG(DEBUG,
+ "unsupported common event (type %d)",
+ event.event_type);
+ continue;
+ }
+ if (tmp > sh->max_port) {
+ /* Invalid IB port index. */
+ mlx5_glue->ack_async_event(&event);
+ DRV_LOG(DEBUG,
+ "cannot handle an event (type %d)"
+ "due to invalid IB port index (%u)",
+ event.event_type, tmp);
+ continue;
+ }
+ if (sh->port[tmp - 1].ih_port_id >= RTE_MAX_ETHPORTS) {
+ /* No handler installed. */
+ mlx5_glue->ack_async_event(&event);
+ DRV_LOG(DEBUG,
+ "cannot handle an event (type %d)"
+ "due to no handler installed for port %u",
+ event.event_type, tmp);
+ continue;
+ }
+ /* Retrieve ethernet device descriptor. */
+ tmp = sh->port[tmp - 1].ih_port_id;
+ dev = &rte_eth_devices[tmp];
+ assert(dev);
if ((event.event_type == IBV_EVENT_PORT_ACTIVE ||
- event.event_type == IBV_EVENT_PORT_ERR) &&
- (priv->dev->data->dev_conf.intr_conf.lsc == 1))
- ret |= (1 << RTE_ETH_EVENT_INTR_LSC);
- else if (event.event_type == IBV_EVENT_DEVICE_FATAL &&
- priv->dev->data->dev_conf.intr_conf.rmv == 1)
- ret |= (1 << RTE_ETH_EVENT_INTR_RMV);
- else
- DEBUG("event type %d on port %d not handled",
- event.event_type, event.element.port_num);
- ibv_ack_async_event(&event);
+ event.event_type == IBV_EVENT_PORT_ERR) &&
+ dev->data->dev_conf.intr_conf.lsc) {
+ mlx5_glue->ack_async_event(&event);
+ if (mlx5_link_update(dev, 0) == -EAGAIN) {
+ usleep(0);
+ continue;
+ }
+ _rte_eth_dev_callback_process
+ (dev, RTE_ETH_EVENT_INTR_LSC, NULL);
+ continue;
+ }
+ DRV_LOG(DEBUG,
+ "port %u cannot handle an unknown event (type %d)",
+ dev->data->port_id, event.event_type);
+ mlx5_glue->ack_async_event(&event);
}
- if (ret & (1 << RTE_ETH_EVENT_INTR_LSC))
- if (priv_link_status_update(priv))
- ret &= ~(1 << RTE_ETH_EVENT_INTR_LSC);
- return ret;
}
-/**
- * Handle delayed link status event.
- *
- * @param arg
- * Registered argument.
+/*
+ * Unregister callback handler safely. The handler may be active
+ * while we are trying to unregister it, in this case code -EAGAIN
+ * is returned by rte_intr_callback_unregister(). This routine checks
+ * the return code and tries to unregister handler again.
+ *
+ * @param handle
+ * interrupt handle
+ * @param cb_fn
+ * pointer to callback routine
+ * @cb_arg
+ * opaque callback parameter
*/
void
-mlx5_dev_link_status_handler(void *arg)
+mlx5_intr_callback_unregister(const struct rte_intr_handle *handle,
+ rte_intr_callback_fn cb_fn, void *cb_arg)
{
- struct rte_eth_dev *dev = arg;
- struct priv *priv = dev->data->dev_private;
- int ret;
+ /*
+ * Try to reduce timeout management overhead by not calling
+ * the timer related routines on the first iteration. If the
+ * unregistering succeeds on first call there will be no
+ * timer calls at all.
+ */
+ uint64_t twait = 0;
+ uint64_t start = 0;
- while (!priv_trylock(priv)) {
- /* Alarm is being canceled. */
- if (priv->pending_alarm == 0)
+ do {
+ int ret;
+
+ ret = rte_intr_callback_unregister(handle, cb_fn, cb_arg);
+ if (ret >= 0)
return;
- rte_pause();
- }
- priv->pending_alarm = 0;
- ret = priv_link_status_update(priv);
- priv_unlock(priv);
- if (!ret)
- _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC, NULL);
+ if (ret != -EAGAIN) {
+ DRV_LOG(INFO, "failed to unregister interrupt"
+ " handler (error: %d)", ret);
+ assert(false);
+ return;
+ }
+ if (twait) {
+ struct timespec onems;
+
+ /* Wait one millisecond and try again. */
+ onems.tv_sec = 0;
+ onems.tv_nsec = NS_PER_S / MS_PER_S;
+ nanosleep(&onems, 0);
+ /* Check whether one second elapsed. */
+ if ((rte_get_timer_cycles() - start) <= twait)
+ continue;
+ } else {
+ /*
+ * We get the amount of timer ticks for one second.
+ * If this amount elapsed it means we spent one
+ * second in waiting. This branch is executed once
+ * on first iteration.
+ */
+ twait = rte_get_timer_hz();
+ assert(twait);
+ }
+ /*
+ * Timeout elapsed, show message (once a second) and retry.
+ * We have no other acceptable option here, if we ignore
+ * the unregistering return code the handler will not
+ * be unregistered, fd will be closed and we may get the
+ * crush. Hanging and messaging in the loop seems not to be
+ * the worst choice.
+ */
+ DRV_LOG(INFO, "Retrying to unregister interrupt handler");
+ start = rte_get_timer_cycles();
+ } while (true);
}
/**
- * Handle interrupts from the NIC.
+ * Handle DEVX interrupts from the NIC.
+ * This function is probably called from the DPDK host thread.
*
- * @param[in] intr_handle
- * Interrupt handler.
* @param cb_arg
* Callback argument.
*/
void
-mlx5_dev_interrupt_handler(void *cb_arg)
+mlx5_dev_interrupt_handler_devx(void *cb_arg)
{
- struct rte_eth_dev *dev = cb_arg;
- struct priv *priv = dev->data->dev_private;
- uint32_t events;
-
- priv_lock(priv);
- events = priv_dev_status_handler(priv);
- priv_unlock(priv);
- if (events & (1 << RTE_ETH_EVENT_INTR_LSC))
- _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC, NULL);
- if (events & (1 << RTE_ETH_EVENT_INTR_RMV))
- _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_RMV, NULL);
+#ifndef HAVE_IBV_DEVX_ASYNC
+ (void)cb_arg;
+ return;
+#else
+ struct mlx5_ibv_shared *sh = cb_arg;
+ union {
+ struct mlx5dv_devx_async_cmd_hdr cmd_resp;
+ uint8_t buf[MLX5_ST_SZ_BYTES(query_flow_counter_out) +
+ MLX5_ST_SZ_BYTES(traffic_counter) +
+ sizeof(struct mlx5dv_devx_async_cmd_hdr)];
+ } out;
+ uint8_t *buf = out.buf + sizeof(out.cmd_resp);
+
+ while (!mlx5_glue->devx_get_async_cmd_comp(sh->devx_comp,
+ &out.cmd_resp,
+ sizeof(out.buf)))
+ mlx5_flow_async_pool_query_handle
+ (sh, (uint64_t)out.cmd_resp.wr_id,
+ mlx5_devx_get_out_command_status(buf));
+#endif /* HAVE_IBV_DEVX_ASYNC */
}
/**
- * Handle interrupts from the socket.
+ * Uninstall shared asynchronous device events handler.
+ * This function is implemented to support event sharing
+ * between multiple ports of single IB device.
*
- * @param cb_arg
- * Callback argument.
+ * @param dev
+ * Pointer to Ethernet device.
*/
static void
-mlx5_dev_handler_socket(void *cb_arg)
+mlx5_dev_shared_handler_uninstall(struct rte_eth_dev *dev)
{
- struct rte_eth_dev *dev = cb_arg;
- struct priv *priv = dev->data->dev_private;
-
- priv_lock(priv);
- priv_socket_handle(priv);
- priv_unlock(priv);
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_ibv_shared *sh = priv->sh;
+
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY)
+ return;
+ pthread_mutex_lock(&sh->intr_mutex);
+ assert(priv->ibv_port);
+ assert(priv->ibv_port <= sh->max_port);
+ assert(dev->data->port_id < RTE_MAX_ETHPORTS);
+ if (sh->port[priv->ibv_port - 1].ih_port_id >= RTE_MAX_ETHPORTS)
+ goto exit;
+ assert(sh->port[priv->ibv_port - 1].ih_port_id ==
+ (uint32_t)dev->data->port_id);
+ assert(sh->intr_cnt);
+ sh->port[priv->ibv_port - 1].ih_port_id = RTE_MAX_ETHPORTS;
+ if (!sh->intr_cnt || --sh->intr_cnt)
+ goto exit;
+ mlx5_intr_callback_unregister(&sh->intr_handle,
+ mlx5_dev_interrupt_handler, sh);
+ sh->intr_handle.fd = 0;
+ sh->intr_handle.type = RTE_INTR_HANDLE_UNKNOWN;
+ if (sh->intr_handle_devx.fd) {
+ rte_intr_callback_unregister(&sh->intr_handle_devx,
+ mlx5_dev_interrupt_handler_devx,
+ sh);
+ sh->intr_handle_devx.fd = 0;
+ sh->intr_handle_devx.type = RTE_INTR_HANDLE_UNKNOWN;
+ }
+ if (sh->devx_comp) {
+ mlx5_glue->devx_destroy_cmd_comp(sh->devx_comp);
+ sh->devx_comp = NULL;
+ }
+exit:
+ pthread_mutex_unlock(&sh->intr_mutex);
}
/**
- * Uninstall interrupt handler.
+ * Install shared asynchronous device events handler.
+ * This function is implemented to support event sharing
+ * between multiple ports of single IB device.
*
- * @param priv
- * Pointer to private structure.
* @param dev
- * Pointer to the rte_eth_dev structure.
+ * Pointer to Ethernet device.
*/
-void
-priv_dev_interrupt_handler_uninstall(struct priv *priv, struct rte_eth_dev *dev)
+static void
+mlx5_dev_shared_handler_install(struct rte_eth_dev *dev)
{
- if (dev->data->dev_conf.intr_conf.lsc ||
- dev->data->dev_conf.intr_conf.rmv)
- rte_intr_callback_unregister(&priv->intr_handle,
- mlx5_dev_interrupt_handler, dev);
- if (priv->primary_socket)
- rte_intr_callback_unregister(&priv->intr_handle_socket,
- mlx5_dev_handler_socket, dev);
- if (priv->pending_alarm) {
- priv->pending_alarm = 0;
- rte_eal_alarm_cancel(mlx5_dev_link_status_handler, dev);
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_ibv_shared *sh = priv->sh;
+ int ret;
+ int flags;
+
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY)
+ return;
+ pthread_mutex_lock(&sh->intr_mutex);
+ assert(priv->ibv_port);
+ assert(priv->ibv_port <= sh->max_port);
+ assert(dev->data->port_id < RTE_MAX_ETHPORTS);
+ if (sh->port[priv->ibv_port - 1].ih_port_id < RTE_MAX_ETHPORTS) {
+ /* The handler is already installed for this port. */
+ assert(sh->intr_cnt);
+ goto exit;
+ }
+ sh->port[priv->ibv_port - 1].ih_port_id = (uint32_t)dev->data->port_id;
+ if (sh->intr_cnt) {
+ sh->intr_cnt++;
+ goto exit;
+ }
+ /* No shared handler installed. */
+ assert(sh->ctx->async_fd > 0);
+ flags = fcntl(sh->ctx->async_fd, F_GETFL);
+ ret = fcntl(sh->ctx->async_fd, F_SETFL, flags | O_NONBLOCK);
+ if (ret) {
+ DRV_LOG(INFO, "failed to change file descriptor"
+ " async event queue");
+ goto error;
}
- priv->intr_handle.fd = 0;
- priv->intr_handle.type = RTE_INTR_HANDLE_UNKNOWN;
- priv->intr_handle_socket.fd = 0;
- priv->intr_handle_socket.type = RTE_INTR_HANDLE_UNKNOWN;
+ sh->intr_handle.fd = sh->ctx->async_fd;
+ sh->intr_handle.type = RTE_INTR_HANDLE_EXT;
+ rte_intr_callback_register(&sh->intr_handle,
+ mlx5_dev_interrupt_handler, sh);
+ if (priv->config.devx) {
+#ifndef HAVE_IBV_DEVX_ASYNC
+ goto error_unregister;
+#else
+ sh->devx_comp = mlx5_glue->devx_create_cmd_comp(sh->ctx);
+ if (sh->devx_comp) {
+ flags = fcntl(sh->devx_comp->fd, F_GETFL);
+ ret = fcntl(sh->devx_comp->fd, F_SETFL,
+ flags | O_NONBLOCK);
+ if (ret) {
+ DRV_LOG(INFO, "failed to change file descriptor"
+ " devx async event queue");
+ goto error_unregister;
+ }
+ sh->intr_handle_devx.fd = sh->devx_comp->fd;
+ sh->intr_handle_devx.type = RTE_INTR_HANDLE_EXT;
+ rte_intr_callback_register
+ (&sh->intr_handle_devx,
+ mlx5_dev_interrupt_handler_devx, sh);
+ } else {
+ DRV_LOG(INFO, "failed to create devx async command "
+ "completion");
+ goto error_unregister;
+ }
+#endif /* HAVE_IBV_DEVX_ASYNC */
+ }
+ sh->intr_cnt++;
+ goto exit;
+error_unregister:
+ rte_intr_callback_unregister(&sh->intr_handle,
+ mlx5_dev_interrupt_handler, sh);
+error:
+ /* Indicate there will be no interrupts. */
+ dev->data->dev_conf.intr_conf.lsc = 0;
+ dev->data->dev_conf.intr_conf.rmv = 0;
+ sh->intr_handle.fd = 0;
+ sh->intr_handle.type = RTE_INTR_HANDLE_UNKNOWN;
+ sh->port[priv->ibv_port - 1].ih_port_id = RTE_MAX_ETHPORTS;
+exit:
+ pthread_mutex_unlock(&sh->intr_mutex);
}
/**
- * Install interrupt handler.
+ * Uninstall interrupt handler.
*
- * @param priv
- * Pointer to private structure.
* @param dev
- * Pointer to the rte_eth_dev structure.
+ * Pointer to Ethernet device.
*/
void
-priv_dev_interrupt_handler_install(struct priv *priv, struct rte_eth_dev *dev)
+mlx5_dev_interrupt_handler_uninstall(struct rte_eth_dev *dev)
{
- int rc, flags;
-
- assert(priv->ctx->async_fd > 0);
- flags = fcntl(priv->ctx->async_fd, F_GETFL);
- rc = fcntl(priv->ctx->async_fd, F_SETFL, flags | O_NONBLOCK);
- if (rc < 0) {
- INFO("failed to change file descriptor async event queue");
- dev->data->dev_conf.intr_conf.lsc = 0;
- dev->data->dev_conf.intr_conf.rmv = 0;
- }
- if (dev->data->dev_conf.intr_conf.lsc ||
- dev->data->dev_conf.intr_conf.rmv) {
- priv->intr_handle.fd = priv->ctx->async_fd;
- priv->intr_handle.type = RTE_INTR_HANDLE_EXT;
- rte_intr_callback_register(&priv->intr_handle,
- mlx5_dev_interrupt_handler, dev);
- }
-
- rc = priv_socket_init(priv);
- if (!rc && priv->primary_socket) {
- priv->intr_handle_socket.fd = priv->primary_socket;
- priv->intr_handle_socket.type = RTE_INTR_HANDLE_EXT;
- rte_intr_callback_register(&priv->intr_handle_socket,
- mlx5_dev_handler_socket, dev);
- }
+ mlx5_dev_shared_handler_uninstall(dev);
}
/**
- * Change the link state (UP / DOWN).
- *
- * @param priv
- * Pointer to private data structure.
- * @param up
- * Nonzero for link up, otherwise link down.
+ * Install interrupt handler.
*
- * @return
- * 0 on success, errno value on failure.
+ * @param dev
+ * Pointer to Ethernet device.
*/
-static int
-priv_dev_set_link(struct priv *priv, int up)
+void
+mlx5_dev_interrupt_handler_install(struct rte_eth_dev *dev)
{
- return priv_set_flags(priv, ~IFF_UP, up ? IFF_UP : ~IFF_UP);
+ mlx5_dev_shared_handler_install(dev);
}
/**
* Pointer to Ethernet device structure.
*
* @return
- * 0 on success, errno value on failure.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_set_link_down(struct rte_eth_dev *dev)
{
- struct priv *priv = dev->data->dev_private;
- int err;
-
- priv_lock(priv);
- err = priv_dev_set_link(priv, 0);
- priv_unlock(priv);
- return err;
+ return mlx5_set_flags(dev, ~IFF_UP, ~IFF_UP);
}
/**
* Pointer to Ethernet device structure.
*
* @return
- * 0 on success, errno value on failure.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_set_link_up(struct rte_eth_dev *dev)
{
- struct priv *priv = dev->data->dev_private;
- int err;
-
- priv_lock(priv);
- err = priv_dev_set_link(priv, 1);
- priv_unlock(priv);
- return err;
-}
-
-/**
- * Configure the TX function to use.
- *
- * @param priv
- * Pointer to private data structure.
- * @param dev
- * Pointer to rte_eth_dev structure.
- *
- * @return
- * Pointer to selected Tx burst function.
- */
-eth_tx_burst_t
-priv_select_tx_function(struct priv *priv, struct rte_eth_dev *dev)
-{
- eth_tx_burst_t tx_pkt_burst = mlx5_tx_burst;
- struct mlx5_dev_config *config = &priv->config;
- uint64_t tx_offloads = dev->data->dev_conf.txmode.offloads;
- int tso = !!(tx_offloads & (DEV_TX_OFFLOAD_TCP_TSO |
- DEV_TX_OFFLOAD_VXLAN_TNL_TSO |
- DEV_TX_OFFLOAD_GRE_TNL_TSO));
- int vlan_insert = !!(tx_offloads & DEV_TX_OFFLOAD_VLAN_INSERT);
-
- assert(priv != NULL);
- /* Select appropriate TX function. */
- if (vlan_insert || tso)
- return tx_pkt_burst;
- if (config->mps == MLX5_MPW_ENHANCED) {
- if (priv_check_vec_tx_support(priv, dev) > 0) {
- if (priv_check_raw_vec_tx_support(priv, dev) > 0)
- tx_pkt_burst = mlx5_tx_burst_raw_vec;
- else
- tx_pkt_burst = mlx5_tx_burst_vec;
- DEBUG("selected Enhanced MPW TX vectorized function");
- } else {
- tx_pkt_burst = mlx5_tx_burst_empw;
- DEBUG("selected Enhanced MPW TX function");
- }
- } else if (config->mps && (config->txq_inline > 0)) {
- tx_pkt_burst = mlx5_tx_burst_mpw_inline;
- DEBUG("selected MPW inline TX function");
- } else if (config->mps) {
- tx_pkt_burst = mlx5_tx_burst_mpw;
- DEBUG("selected MPW TX function");
- }
- return tx_pkt_burst;
+ return mlx5_set_flags(dev, ~IFF_UP, IFF_UP);
}
/**
* Configure the RX function to use.
*
- * @param priv
- * Pointer to private data structure.
* @param dev
- * Pointer to rte_eth_dev structure.
+ * Pointer to private data structure.
*
* @return
* Pointer to selected Rx burst function.
*/
eth_rx_burst_t
-priv_select_rx_function(struct priv *priv, __rte_unused struct rte_eth_dev *dev)
+mlx5_select_rx_function(struct rte_eth_dev *dev)
{
eth_rx_burst_t rx_pkt_burst = mlx5_rx_burst;
- assert(priv != NULL);
- if (priv_check_vec_rx_support(priv) > 0) {
+ assert(dev != NULL);
+ if (mlx5_check_vec_rx_support(dev) > 0) {
rx_pkt_burst = mlx5_rx_burst_vec;
- DEBUG("selected RX vectorized function");
+ DRV_LOG(DEBUG, "port %u selected Rx vectorized function",
+ dev->data->port_id);
+ } else if (mlx5_mprq_enabled(dev)) {
+ rx_pkt_burst = mlx5_rx_burst_mprq;
}
return rx_pkt_burst;
}
mlx5_is_removed(struct rte_eth_dev *dev)
{
struct ibv_device_attr device_attr;
- struct priv *priv = dev->data->dev_private;
+ struct mlx5_priv *priv = dev->data->dev_private;
- if (ibv_query_device(priv->ctx, &device_attr) == EIO)
+ if (mlx5_glue->query_device(priv->sh->ctx, &device_attr) == EIO)
return 1;
return 0;
}
+
+/**
+ * Get the E-Switch parameters by port id.
+ *
+ * @param[in] port
+ * Device port id.
+ * @param[out] es_domain_id
+ * E-Switch domain id.
+ * @param[out] es_port_id
+ * The port id of the port in the E-Switch.
+ *
+ * @return
+ * pointer to device private data structure containing data needed
+ * on success, NULL otherwise and rte_errno is set.
+ */
+struct mlx5_priv *
+mlx5_port_to_eswitch_info(uint16_t port)
+{
+ struct rte_eth_dev *dev;
+ struct mlx5_priv *priv;
+
+ if (port >= RTE_MAX_ETHPORTS) {
+ rte_errno = EINVAL;
+ return NULL;
+ }
+ if (!rte_eth_dev_is_valid_port(port)) {
+ rte_errno = ENODEV;
+ return NULL;
+ }
+ dev = &rte_eth_devices[port];
+ priv = dev->data->dev_private;
+ if (!(priv->representor || priv->master)) {
+ rte_errno = EINVAL;
+ return NULL;
+ }
+ return priv;
+}
+
+/**
+ * Get the E-Switch parameters by device instance.
+ *
+ * @param[in] port
+ * Device port id.
+ * @param[out] es_domain_id
+ * E-Switch domain id.
+ * @param[out] es_port_id
+ * The port id of the port in the E-Switch.
+ *
+ * @return
+ * pointer to device private data structure containing data needed
+ * on success, NULL otherwise and rte_errno is set.
+ */
+struct mlx5_priv *
+mlx5_dev_to_eswitch_info(struct rte_eth_dev *dev)
+{
+ struct mlx5_priv *priv;
+
+ priv = dev->data->dev_private;
+ if (!(priv->representor || priv->master)) {
+ rte_errno = EINVAL;
+ return NULL;
+ }
+ return priv;
+}
+
+/**
+ * Get switch information associated with network interface.
+ *
+ * @param ifindex
+ * Network interface index.
+ * @param[out] info
+ * Switch information object, populated in case of success.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_sysfs_switch_info(unsigned int ifindex, struct mlx5_switch_info *info)
+{
+ char ifname[IF_NAMESIZE];
+ char port_name[IF_NAMESIZE];
+ FILE *file;
+ struct mlx5_switch_info data = {
+ .master = 0,
+ .representor = 0,
+ .name_type = MLX5_PHYS_PORT_NAME_TYPE_NOTSET,
+ .port_name = 0,
+ .switch_id = 0,
+ };
+ DIR *dir;
+ bool port_switch_id_set = false;
+ bool device_dir = false;
+ char c;
+ int ret;
+
+ if (!if_indextoname(ifindex, ifname)) {
+ rte_errno = errno;
+ return -rte_errno;
+ }
+
+ MKSTR(phys_port_name, "/sys/class/net/%s/phys_port_name",
+ ifname);
+ MKSTR(phys_switch_id, "/sys/class/net/%s/phys_switch_id",
+ ifname);
+ MKSTR(pci_device, "/sys/class/net/%s/device",
+ ifname);
+
+ file = fopen(phys_port_name, "rb");
+ if (file != NULL) {
+ ret = fscanf(file, "%s", port_name);
+ fclose(file);
+ if (ret == 1)
+ mlx5_translate_port_name(port_name, &data);
+ }
+ file = fopen(phys_switch_id, "rb");
+ if (file == NULL) {
+ rte_errno = errno;
+ return -rte_errno;
+ }
+ port_switch_id_set =
+ fscanf(file, "%" SCNx64 "%c", &data.switch_id, &c) == 2 &&
+ c == '\n';
+ fclose(file);
+ dir = opendir(pci_device);
+ if (dir != NULL) {
+ closedir(dir);
+ device_dir = true;
+ }
+ if (port_switch_id_set) {
+ /* We have some E-Switch configuration. */
+ mlx5_sysfs_check_switch_info(device_dir, &data);
+ }
+ *info = data;
+ assert(!(data.master && data.representor));
+ if (data.master && data.representor) {
+ DRV_LOG(ERR, "ifindex %u device is recognized as master"
+ " and as representor", ifindex);
+ rte_errno = ENODEV;
+ return -rte_errno;
+ }
+ return 0;
+}
+
+/**
+ * Analyze gathered port parameters via Netlink to recognize master
+ * and representor devices for E-Switch configuration.
+ *
+ * @param[in] num_vf_set
+ * flag of presence of number of VFs port attribute.
+ * @param[inout] switch_info
+ * Port information, including port name as a number and port name
+ * type if recognized
+ *
+ * @return
+ * master and representor flags are set in switch_info according to
+ * recognized parameters (if any).
+ */
+void
+mlx5_nl_check_switch_info(bool num_vf_set,
+ struct mlx5_switch_info *switch_info)
+{
+ switch (switch_info->name_type) {
+ case MLX5_PHYS_PORT_NAME_TYPE_UNKNOWN:
+ /*
+ * Name is not recognized, assume the master,
+ * check the number of VFs key presence.
+ */
+ switch_info->master = num_vf_set;
+ break;
+ case MLX5_PHYS_PORT_NAME_TYPE_NOTSET:
+ /*
+ * Name is not set, this assumes the legacy naming
+ * schema for master, just check if there is a
+ * number of VFs key.
+ */
+ switch_info->master = num_vf_set;
+ break;
+ case MLX5_PHYS_PORT_NAME_TYPE_UPLINK:
+ /* New uplink naming schema recognized. */
+ switch_info->master = 1;
+ break;
+ case MLX5_PHYS_PORT_NAME_TYPE_LEGACY:
+ /* Legacy representors naming schema. */
+ switch_info->representor = !num_vf_set;
+ break;
+ case MLX5_PHYS_PORT_NAME_TYPE_PFVF:
+ /* New representors naming schema. */
+ switch_info->representor = 1;
+ break;
+ }
+}
+
+/**
+ * Analyze gathered port parameters via sysfs to recognize master
+ * and representor devices for E-Switch configuration.
+ *
+ * @param[in] device_dir
+ * flag of presence of "device" directory under port device key.
+ * @param[inout] switch_info
+ * Port information, including port name as a number and port name
+ * type if recognized
+ *
+ * @return
+ * master and representor flags are set in switch_info according to
+ * recognized parameters (if any).
+ */
+void
+mlx5_sysfs_check_switch_info(bool device_dir,
+ struct mlx5_switch_info *switch_info)
+{
+ switch (switch_info->name_type) {
+ case MLX5_PHYS_PORT_NAME_TYPE_UNKNOWN:
+ /*
+ * Name is not recognized, assume the master,
+ * check the device directory presence.
+ */
+ switch_info->master = device_dir;
+ break;
+ case MLX5_PHYS_PORT_NAME_TYPE_NOTSET:
+ /*
+ * Name is not set, this assumes the legacy naming
+ * schema for master, just check if there is
+ * a device directory.
+ */
+ switch_info->master = device_dir;
+ break;
+ case MLX5_PHYS_PORT_NAME_TYPE_UPLINK:
+ /* New uplink naming schema recognized. */
+ switch_info->master = 1;
+ break;
+ case MLX5_PHYS_PORT_NAME_TYPE_LEGACY:
+ /* Legacy representors naming schema. */
+ switch_info->representor = !device_dir;
+ break;
+ case MLX5_PHYS_PORT_NAME_TYPE_PFVF:
+ /* New representors naming schema. */
+ switch_info->representor = 1;
+ break;
+ }
+}
+
+/**
+ * Extract port name, as a number, from sysfs or netlink information.
+ *
+ * @param[in] port_name_in
+ * String representing the port name.
+ * @param[out] port_info_out
+ * Port information, including port name as a number and port name
+ * type if recognized
+ *
+ * @return
+ * port_name field set according to recognized name format.
+ */
+void
+mlx5_translate_port_name(const char *port_name_in,
+ struct mlx5_switch_info *port_info_out)
+{
+ char pf_c1, pf_c2, vf_c1, vf_c2;
+ char *end;
+ int sc_items;
+
+ /*
+ * Check for port-name as a string of the form pf0vf0
+ * (support kernel ver >= 5.0 or OFED ver >= 4.6).
+ */
+ sc_items = sscanf(port_name_in, "%c%c%d%c%c%d",
+ &pf_c1, &pf_c2, &port_info_out->pf_num,
+ &vf_c1, &vf_c2, &port_info_out->port_name);
+ if (sc_items == 6 &&
+ pf_c1 == 'p' && pf_c2 == 'f' &&
+ vf_c1 == 'v' && vf_c2 == 'f') {
+ port_info_out->name_type = MLX5_PHYS_PORT_NAME_TYPE_PFVF;
+ return;
+ }
+ /*
+ * Check for port-name as a string of the form p0
+ * (support kernel ver >= 5.0, or OFED ver >= 4.6).
+ */
+ sc_items = sscanf(port_name_in, "%c%d",
+ &pf_c1, &port_info_out->port_name);
+ if (sc_items == 2 && pf_c1 == 'p') {
+ port_info_out->name_type = MLX5_PHYS_PORT_NAME_TYPE_UPLINK;
+ return;
+ }
+ /* Check for port-name as a number (support kernel ver < 5.0 */
+ errno = 0;
+ port_info_out->port_name = strtol(port_name_in, &end, 0);
+ if (!errno &&
+ (size_t)(end - port_name_in) == strlen(port_name_in)) {
+ port_info_out->name_type = MLX5_PHYS_PORT_NAME_TYPE_LEGACY;
+ return;
+ }
+ port_info_out->name_type = MLX5_PHYS_PORT_NAME_TYPE_UNKNOWN;
+ return;
+}
+
+/**
+ * DPDK callback to retrieve plug-in module EEPROM information (type and size).
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param[out] modinfo
+ * Storage for plug-in module EEPROM information.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_get_module_info(struct rte_eth_dev *dev,
+ struct rte_eth_dev_module_info *modinfo)
+{
+ struct ethtool_modinfo info = {
+ .cmd = ETHTOOL_GMODULEINFO,
+ };
+ struct ifreq ifr = (struct ifreq) {
+ .ifr_data = (void *)&info,
+ };
+ int ret = 0;
+
+ if (!dev || !modinfo) {
+ DRV_LOG(WARNING, "missing argument, cannot get module info");
+ rte_errno = EINVAL;
+ return -rte_errno;
+ }
+ ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr);
+ if (ret) {
+ DRV_LOG(WARNING, "port %u ioctl(SIOCETHTOOL) failed: %s",
+ dev->data->port_id, strerror(rte_errno));
+ return ret;
+ }
+ modinfo->type = info.type;
+ modinfo->eeprom_len = info.eeprom_len;
+ return ret;
+}
+
+/**
+ * DPDK callback to retrieve plug-in module EEPROM data.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param[out] info
+ * Storage for plug-in module EEPROM data.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int mlx5_get_module_eeprom(struct rte_eth_dev *dev,
+ struct rte_dev_eeprom_info *info)
+{
+ struct ethtool_eeprom *eeprom;
+ struct ifreq ifr;
+ int ret = 0;
+
+ if (!dev || !info) {
+ DRV_LOG(WARNING, "missing argument, cannot get module eeprom");
+ rte_errno = EINVAL;
+ return -rte_errno;
+ }
+ eeprom = rte_calloc(__func__, 1,
+ (sizeof(struct ethtool_eeprom) + info->length), 0);
+ if (!eeprom) {
+ DRV_LOG(WARNING, "port %u cannot allocate memory for "
+ "eeprom data", dev->data->port_id);
+ rte_errno = ENOMEM;
+ return -rte_errno;
+ }
+ eeprom->cmd = ETHTOOL_GMODULEEEPROM;
+ eeprom->offset = info->offset;
+ eeprom->len = info->length;
+ ifr = (struct ifreq) {
+ .ifr_data = (void *)eeprom,
+ };
+ ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr);
+ if (ret)
+ DRV_LOG(WARNING, "port %u ioctl(SIOCETHTOOL) failed: %s",
+ dev->data->port_id, strerror(rte_errno));
+ else
+ rte_memcpy(info->data, eeprom->data, info->length);
+ rte_free(eeprom);
+ return ret;
+}