-/*-
- * BSD LICENSE
- *
- * Copyright 2015 6WIND S.A.
- * Copyright 2015 Mellanox.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of 6WIND S.A. nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2015 6WIND S.A.
+ * Copyright 2015 Mellanox.
*/
#define _GNU_SOURCE
#include <sys/un.h>
#include <rte_atomic.h>
-#include <rte_ethdev.h>
+#include <rte_ethdev_driver.h>
#include <rte_bus_pci.h>
#include <rte_mbuf.h>
#include <rte_common.h>
#include <rte_malloc.h>
#include "mlx5.h"
+#include "mlx5_glue.h"
#include "mlx5_rxtx.h"
#include "mlx5_utils.h"
priv->reta_idx_n : config->ind_table_max_size;
info->hash_key_size = priv->rss_conf.rss_key_len;
info->speed_capa = priv->link_speed_capa;
+ info->flow_type_rss_offloads = ~MLX5_RSS_HF_MASK;
priv_unlock(priv);
}
}
/**
- * DPDK callback to retrieve physical link information.
+ * Enable receiving and transmitting traffic.
*
- * @param dev
- * Pointer to Ethernet device structure.
+ * @param priv
+ * Pointer to private structure.
+ */
+static void
+priv_link_start(struct priv *priv)
+{
+ struct rte_eth_dev *dev = priv->dev;
+ int err;
+
+ dev->tx_pkt_burst = priv_select_tx_function(priv, dev);
+ dev->rx_pkt_burst = priv_select_rx_function(priv, dev);
+ err = priv_dev_traffic_enable(priv, dev);
+ if (err)
+ ERROR("%p: error occurred while configuring control flows: %s",
+ (void *)priv, strerror(err));
+ err = priv_flow_start(priv, &priv->flows);
+ if (err)
+ ERROR("%p: error occurred while configuring flows: %s",
+ (void *)priv, strerror(err));
+}
+
+/**
+ * Disable receiving and transmitting traffic.
+ *
+ * @param priv
+ * Pointer to private structure.
+ */
+static void
+priv_link_stop(struct priv *priv)
+{
+ struct rte_eth_dev *dev = priv->dev;
+
+ priv_flow_stop(priv, &priv->flows);
+ priv_dev_traffic_disable(priv, dev);
+ dev->rx_pkt_burst = removed_rx_burst;
+ dev->tx_pkt_burst = removed_tx_burst;
+}
+
+/**
+ * Retrieve physical link information and update rx/tx_pkt_burst callbacks
+ * accordingly.
+ *
+ * @param priv
+ * Pointer to private structure.
* @param wait_to_complete
* Wait for request completion (ignored).
*/
int
-mlx5_link_update(struct rte_eth_dev *dev, int wait_to_complete)
+priv_link_update(struct priv *priv, int wait_to_complete)
{
+ struct rte_eth_dev *dev = priv->dev;
struct utsname utsname;
int ver[3];
+ int ret;
+ struct rte_eth_link dev_link = dev->data->dev_link;
if (uname(&utsname) == -1 ||
sscanf(utsname.release, "%d.%d.%d",
&ver[0], &ver[1], &ver[2]) != 3 ||
KERNEL_VERSION(ver[0], ver[1], ver[2]) < KERNEL_VERSION(4, 9, 0))
- return mlx5_link_update_unlocked_gset(dev, wait_to_complete);
- return mlx5_link_update_unlocked_gs(dev, wait_to_complete);
+ ret = mlx5_link_update_unlocked_gset(dev, wait_to_complete);
+ else
+ ret = mlx5_link_update_unlocked_gs(dev, wait_to_complete);
+ /* If lsc interrupt is disabled, should always be ready for traffic. */
+ if (!dev->data->dev_conf.intr_conf.lsc) {
+ priv_link_start(priv);
+ return ret;
+ }
+ /* Re-select burst callbacks only if link status has been changed. */
+ if (!ret && dev_link.link_status != dev->data->dev_link.link_status) {
+ if (dev->data->dev_link.link_status == ETH_LINK_UP)
+ priv_link_start(priv);
+ else
+ priv_link_stop(priv);
+ }
+ return ret;
+}
+
+/**
+ * Querying the link status till it changes to the desired state.
+ * Number of query attempts is bounded by MLX5_MAX_LINK_QUERY_ATTEMPTS.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param status
+ * Link desired status.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+int
+priv_force_link_status_change(struct priv *priv, int status)
+{
+ int try = 0;
+
+ while (try < MLX5_MAX_LINK_QUERY_ATTEMPTS) {
+ priv_link_update(priv, 0);
+ if (priv->dev->data->dev_link.link_status == status)
+ return 0;
+ try++;
+ sleep(1);
+ }
+ return -EAGAIN;
+}
+
+/**
+ * DPDK callback to retrieve physical link information.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param wait_to_complete
+ * Wait for request completion (ignored).
+ */
+int
+mlx5_link_update(struct rte_eth_dev *dev, int wait_to_complete)
+{
+ struct priv *priv = dev->data->dev_private;
+ int ret;
+
+ priv_lock(priv);
+ ret = priv_link_update(priv, wait_to_complete);
+ priv_unlock(priv);
+ return ret;
}
/**
{
struct rte_eth_link *link = &priv->dev->data->dev_link;
- mlx5_link_update(priv->dev, 0);
+ priv_link_update(priv, 0);
if (((link->link_speed == 0) && link->link_status) ||
((link->link_speed != 0) && !link->link_status)) {
/*
/* Read all message and acknowledge them. */
for (;;) {
- if (ibv_get_async_event(priv->ctx, &event))
+ if (mlx5_glue->get_async_event(priv->ctx, &event))
break;
if ((event.event_type == IBV_EVENT_PORT_ACTIVE ||
event.event_type == IBV_EVENT_PORT_ERR) &&
else
DEBUG("event type %d on port %d not handled",
event.event_type, event.element.port_num);
- ibv_ack_async_event(&event);
+ mlx5_glue->ack_async_event(&event);
}
if (ret & (1 << RTE_ETH_EVENT_INTR_LSC))
if (priv_link_status_update(priv))
*
* @param priv
* Pointer to private data structure.
- * @param dev
- * Pointer to rte_eth_dev structure.
* @param up
* Nonzero for link up, otherwise link down.
*
* 0 on success, errno value on failure.
*/
static int
-priv_dev_set_link(struct priv *priv, struct rte_eth_dev *dev, int up)
+priv_dev_set_link(struct priv *priv, int up)
{
- int err;
-
- if (up) {
- err = priv_set_flags(priv, ~IFF_UP, IFF_UP);
- if (err)
- return err;
- dev->tx_pkt_burst = priv_select_tx_function(priv, dev);
- dev->rx_pkt_burst = priv_select_rx_function(priv, dev);
- } else {
- err = priv_set_flags(priv, ~IFF_UP, ~IFF_UP);
- if (err)
- return err;
- dev->rx_pkt_burst = removed_rx_burst;
- dev->tx_pkt_burst = removed_tx_burst;
- }
- return 0;
+ return priv_set_flags(priv, ~IFF_UP, up ? IFF_UP : ~IFF_UP);
}
/**
int err;
priv_lock(priv);
- err = priv_dev_set_link(priv, dev, 0);
+ err = priv_dev_set_link(priv, 0);
priv_unlock(priv);
return err;
}
int err;
priv_lock(priv);
- err = priv_dev_set_link(priv, dev, 1);
+ err = priv_dev_set_link(priv, 1);
priv_unlock(priv);
return err;
}
}
return rx_pkt_burst;
}
+
+/**
+ * Check if mlx5 device was removed.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ *
+ * @return
+ * 1 when device is removed, otherwise 0.
+ */
+int
+mlx5_is_removed(struct rte_eth_dev *dev)
+{
+ struct ibv_device_attr device_attr;
+ struct priv *priv = dev->data->dev_private;
+
+ if (mlx5_glue->query_device(priv->ctx, &device_attr) == EIO)
+ return 1;
+ return 0;
+}