case MLX5_METADATA_TX:
return REG_A;
case MLX5_METADATA_FDB:
- return REG_C_0;
+ switch (config->dv_xmeta_en) {
+ case MLX5_XMETA_MODE_LEGACY:
+ return REG_NONE;
+ case MLX5_XMETA_MODE_META16:
+ return REG_C_0;
+ case MLX5_XMETA_MODE_META32:
+ return REG_C_1;
+ }
+ break;
case MLX5_FLOW_MARK:
switch (config->dv_xmeta_en) {
case MLX5_XMETA_MODE_LEGACY:
RTE_FLOW_ERROR_TYPE_ACTION_CONF,
NULL, "No queues configured");
for (i = 0; i != rss->queue_num; ++i) {
+ if (rss->queue[i] >= priv->rxqs_n)
+ return rte_flow_error_set
+ (error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->queue[i], "queue index out of range");
if (!(*priv->rxqs)[rss->queue[i]])
return rte_flow_error_set
(error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION_CONF,
return 0;
}
+/**
+ * Get port id item from the item list.
+ *
+ * @param[in] item
+ * Pointer to the list of items.
+ *
+ * @return
+ * Pointer to the port id item if exist, else return NULL.
+ */
+static const struct rte_flow_item *
+find_port_id_item(const struct rte_flow_item *item)
+{
+ assert(item);
+ for (; item->type != RTE_FLOW_ITEM_TYPE_END; item++) {
+ if (item->type == RTE_FLOW_ITEM_TYPE_PORT_ID)
+ return item;
+ }
+ return NULL;
+}
+
/**
* Get RSS action from the action list.
*
return actions_n + 1;
}
+/**
+ * Check meter action from the action list.
+ *
+ * @param[in] actions
+ * Pointer to the list of actions.
+ * @param[out] mtr
+ * Pointer to the meter exist flag.
+ *
+ * @return
+ * Total number of actions.
+ */
+static int
+flow_check_meter_action(const struct rte_flow_action actions[], uint32_t *mtr)
+{
+ int actions_n = 0;
+
+ assert(mtr);
+ *mtr = 0;
+ for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
+ switch (actions->type) {
+ case RTE_FLOW_ACTION_TYPE_METER:
+ *mtr = 1;
+ break;
+ default:
+ break;
+ }
+ actions_n++;
+ }
+ /* Count RTE_FLOW_ACTION_TYPE_END. */
+ return actions_n + 1;
+}
+
/**
* Check if the flow should be splited due to hairpin.
* The reason for the split is that in current HW we can't
switch (actions->type) {
case RTE_FLOW_ACTION_TYPE_QUEUE:
queue = actions->conf;
+ if (queue == NULL)
+ return 0;
if (mlx5_rxq_get_type(dev, queue->index) !=
MLX5_RXQ_TYPE_HAIRPIN)
return 0;
break;
case RTE_FLOW_ACTION_TYPE_RSS:
rss = actions->conf;
+ if (rss == NULL || rss->queue_num == 0)
+ return 0;
if (mlx5_rxq_get_type(dev, rss->queue[0]) !=
MLX5_RXQ_TYPE_HAIRPIN)
return 0;
return flow_drv_translate(dev, dev_flow, attr, items, actions, error);
}
+/**
+ * Split the meter flow.
+ *
+ * As meter flow will split to three sub flow, other than meter
+ * action, the other actions make sense to only meter accepts
+ * the packet. If it need to be dropped, no other additional
+ * actions should be take.
+ *
+ * One kind of special action which decapsulates the L3 tunnel
+ * header will be in the prefix sub flow, as not to take the
+ * L3 tunnel header into account.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param[in] actions
+ * Associated actions (list terminated by the END action).
+ * @param[out] actions_sfx
+ * Suffix flow actions.
+ * @param[out] actions_pre
+ * Prefix flow actions.
+ * @param[out] pattern_sfx
+ * The pattern items for the suffix flow.
+ * @param[out] tag_sfx
+ * Pointer to suffix flow tag.
+ *
+ * @return
+ * 0 on success.
+ */
+static int
+flow_meter_split_prep(struct rte_eth_dev *dev,
+ const struct rte_flow_action actions[],
+ struct rte_flow_action actions_sfx[],
+ struct rte_flow_action actions_pre[])
+{
+ struct rte_flow_action *tag_action;
+ struct mlx5_rte_flow_action_set_tag *set_tag;
+ struct rte_flow_error error;
+ const struct rte_flow_action_raw_encap *raw_encap;
+ const struct rte_flow_action_raw_decap *raw_decap;
+ uint32_t tag_id;
+
+ /* Add the extra tag action first. */
+ tag_action = actions_pre;
+ tag_action->type = MLX5_RTE_FLOW_ACTION_TYPE_TAG;
+ actions_pre++;
+ /* Prepare the actions for prefix and suffix flow. */
+ for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
+ switch (actions->type) {
+ case RTE_FLOW_ACTION_TYPE_METER:
+ case RTE_FLOW_ACTION_TYPE_VXLAN_DECAP:
+ case RTE_FLOW_ACTION_TYPE_NVGRE_DECAP:
+ memcpy(actions_pre, actions,
+ sizeof(struct rte_flow_action));
+ actions_pre++;
+ break;
+ case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
+ raw_encap = actions->conf;
+ if (raw_encap->size >
+ (sizeof(struct rte_flow_item_eth) +
+ sizeof(struct rte_flow_item_ipv4))) {
+ memcpy(actions_sfx, actions,
+ sizeof(struct rte_flow_action));
+ actions_sfx++;
+ } else {
+ rte_memcpy(actions_pre, actions,
+ sizeof(struct rte_flow_action));
+ actions_pre++;
+ }
+ break;
+ case RTE_FLOW_ACTION_TYPE_RAW_DECAP:
+ raw_decap = actions->conf;
+ /* Size 0 decap means 50 bytes as vxlan decap. */
+ if (raw_decap->size && (raw_decap->size <
+ (sizeof(struct rte_flow_item_eth) +
+ sizeof(struct rte_flow_item_ipv4)))) {
+ memcpy(actions_sfx, actions,
+ sizeof(struct rte_flow_action));
+ actions_sfx++;
+ } else {
+ rte_memcpy(actions_pre, actions,
+ sizeof(struct rte_flow_action));
+ actions_pre++;
+ }
+ break;
+ default:
+ memcpy(actions_sfx, actions,
+ sizeof(struct rte_flow_action));
+ actions_sfx++;
+ break;
+ }
+ }
+ /* Add end action to the actions. */
+ actions_sfx->type = RTE_FLOW_ACTION_TYPE_END;
+ actions_pre->type = RTE_FLOW_ACTION_TYPE_END;
+ actions_pre++;
+ /* Set the tag. */
+ set_tag = (void *)actions_pre;
+ set_tag->id = mlx5_flow_get_reg_id(dev, MLX5_MTR_SFX, 0, &error);
+ /*
+ * Get the id from the qrss_pool to make qrss share the id with meter.
+ */
+ tag_id = flow_qrss_get_id(dev);
+ set_tag->data = rte_cpu_to_be_32(tag_id);
+ tag_action->conf = set_tag;
+ return tag_id;
+}
+
/**
* Split action list having QUEUE/RSS for metadata register copy.
*
struct mlx5_rte_flow_action_set_tag *set_tag;
struct rte_flow_action_jump *jump;
const int qrss_idx = qrss - actions;
- uint32_t flow_id;
+ uint32_t flow_id = 0;
int ret = 0;
/*
* As a result, there will be one more action.
*/
++actions_n;
+ memcpy(split_actions, actions, sizeof(*split_actions) * actions_n);
+ set_tag = (void *)(split_actions + actions_n);
/*
- * Allocate the new subflow ID. This one is unique within
- * device and not shared with representors. Otherwise,
- * we would have to resolve multi-thread access synch
- * issue. Each flow on the shared device is appended
- * with source vport identifier, so the resulting
- * flows will be unique in the shared (by master and
- * representors) domain even if they have coinciding
- * IDs.
+ * If tag action is not set to void(it means we are not the meter
+ * suffix flow), add the tag action. Since meter suffix flow already
+ * has the tag added.
*/
- flow_id = flow_qrss_get_id(dev);
- if (!flow_id)
- return rte_flow_error_set(error, ENOMEM,
- RTE_FLOW_ERROR_TYPE_ACTION,
- NULL, "can't allocate id "
- "for split Q/RSS subflow");
- /* Internal SET_TAG action to set flow ID. */
- set_tag = (void *)(split_actions + actions_n);
- *set_tag = (struct mlx5_rte_flow_action_set_tag){
- .data = flow_id,
- };
- ret = mlx5_flow_get_reg_id(dev, MLX5_COPY_MARK, 0, error);
- if (ret < 0)
- return ret;
- set_tag->id = ret;
+ if (split_actions[qrss_idx].type != RTE_FLOW_ACTION_TYPE_VOID) {
+ /*
+ * Allocate the new subflow ID. This one is unique within
+ * device and not shared with representors. Otherwise,
+ * we would have to resolve multi-thread access synch
+ * issue. Each flow on the shared device is appended
+ * with source vport identifier, so the resulting
+ * flows will be unique in the shared (by master and
+ * representors) domain even if they have coinciding
+ * IDs.
+ */
+ flow_id = flow_qrss_get_id(dev);
+ if (!flow_id)
+ return rte_flow_error_set(error, ENOMEM,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "can't allocate id "
+ "for split Q/RSS subflow");
+ /* Internal SET_TAG action to set flow ID. */
+ *set_tag = (struct mlx5_rte_flow_action_set_tag){
+ .data = flow_id,
+ };
+ ret = mlx5_flow_get_reg_id(dev, MLX5_COPY_MARK, 0, error);
+ if (ret < 0)
+ return ret;
+ set_tag->id = ret;
+ /* Construct new actions array. */
+ /* Replace QUEUE/RSS action. */
+ split_actions[qrss_idx] = (struct rte_flow_action){
+ .type = MLX5_RTE_FLOW_ACTION_TYPE_TAG,
+ .conf = set_tag,
+ };
+ }
/* JUMP action to jump to mreg copy table (CP_TBL). */
jump = (void *)(set_tag + 1);
*jump = (struct rte_flow_action_jump){
.group = MLX5_FLOW_MREG_CP_TABLE_GROUP,
};
- /* Construct new actions array. */
- memcpy(split_actions, actions, sizeof(*split_actions) * actions_n);
- /* Replace QUEUE/RSS action. */
- split_actions[qrss_idx] = (struct rte_flow_action){
- .type = MLX5_RTE_FLOW_ACTION_TYPE_TAG,
- .conf = set_tag,
- };
split_actions[actions_n - 2] = (struct rte_flow_action){
.type = RTE_FLOW_ACTION_TYPE_JUMP,
.conf = jump,
struct rte_flow_action *ext_actions = NULL;
struct mlx5_flow *dev_flow = NULL;
uint32_t qrss_id = 0;
+ int mtr_sfx = 0;
size_t act_size;
int actions_n;
int ret;
}
}
if (qrss) {
+ /* Check if it is in meter suffix table. */
+ mtr_sfx = attr->group == (attr->transfer ?
+ (MLX5_FLOW_TABLE_LEVEL_SUFFIX - 1) :
+ MLX5_FLOW_TABLE_LEVEL_SUFFIX);
/*
* Q/RSS action on NIC Rx should be split in order to pass by
* the mreg copy table (RX_CP_TBL) and then it jumps to the
RTE_FLOW_ERROR_TYPE_ACTION,
NULL, "no memory to split "
"metadata flow");
+ /*
+ * If we are the suffix flow of meter, tag already exist.
+ * Set the tag action to void.
+ */
+ if (mtr_sfx)
+ ext_actions[qrss - actions].type =
+ RTE_FLOW_ACTION_TYPE_VOID;
+ else
+ ext_actions[qrss - actions].type =
+ MLX5_RTE_FLOW_ACTION_TYPE_TAG;
/*
* Create the new actions list with removed Q/RSS action
* and appended set tag and jump to register copy table
*/
qrss_id = flow_mreg_split_qrss_prep(dev, ext_actions, actions,
qrss, actions_n, error);
- if (!qrss_id) {
+ if (!mtr_sfx && !qrss_id) {
ret = -rte_errno;
goto exit;
}
if (ret < 0)
goto exit;
assert(dev_flow);
- if (qrss_id) {
+ if (qrss) {
const struct rte_flow_attr q_attr = {
.group = MLX5_FLOW_MREG_ACT_TABLE_GROUP,
.ingress = 1,
},
};
uint64_t hash_fields = dev_flow->hash_fields;
+
/*
- * Put unique id in prefix flow due to it is destroyed after
- * prefix flow and id will be freed after there is no actual
- * flows with this id and identifier reallocation becomes
- * possible (for example, for other flows in other threads).
+ * Configure the tag item only if there is no meter subflow.
+ * Since tag is already marked in the meter suffix subflow
+ * we can just use the meter suffix items as is.
*/
- dev_flow->qrss_id = qrss_id;
- qrss_id = 0;
+ if (qrss_id) {
+ /* Not meter subflow. */
+ assert(!mtr_sfx);
+ /*
+ * Put unique id in prefix flow due to it is destroyed
+ * after suffix flow and id will be freed after there
+ * is no actual flows with this id and identifier
+ * reallocation becomes possible (for example, for
+ * other flows in other threads).
+ */
+ dev_flow->qrss_id = qrss_id;
+ qrss_id = 0;
+ ret = mlx5_flow_get_reg_id(dev, MLX5_COPY_MARK, 0,
+ error);
+ if (ret < 0)
+ goto exit;
+ q_tag_spec.id = ret;
+ }
dev_flow = NULL;
- ret = mlx5_flow_get_reg_id(dev, MLX5_COPY_MARK, 0, error);
- if (ret < 0)
- goto exit;
- q_tag_spec.id = ret;
/* Add suffix subflow to execute Q/RSS. */
ret = flow_create_split_inner(dev, flow, &dev_flow,
- &q_attr, q_items, q_actions,
+ &q_attr, mtr_sfx ? items :
+ q_items, q_actions,
external, error);
if (ret < 0)
goto exit;
return ret;
}
+/**
+ * The splitting for meter feature.
+ *
+ * - The meter flow will be split to two flows as prefix and
+ * suffix flow. The packets make sense only it pass the prefix
+ * meter action.
+ *
+ * - Reg_C_5 is used for the packet to match betweend prefix and
+ * suffix flow.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param[in] flow
+ * Parent flow structure pointer.
+ * @param[in] attr
+ * Flow rule attributes.
+ * @param[in] items
+ * Pattern specification (list terminated by the END pattern item).
+ * @param[in] actions
+ * Associated actions (list terminated by the END action).
+ * @param[in] external
+ * This flow rule is created by request external to PMD.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL.
+ * @return
+ * 0 on success, negative value otherwise
+ */
+static int
+flow_create_split_meter(struct rte_eth_dev *dev,
+ struct rte_flow *flow,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item items[],
+ const struct rte_flow_action actions[],
+ bool external, struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct rte_flow_action *sfx_actions = NULL;
+ struct rte_flow_action *pre_actions = NULL;
+ struct rte_flow_item *sfx_items = NULL;
+ const struct rte_flow_item *sfx_port_id_item;
+ struct mlx5_flow *dev_flow = NULL;
+ struct rte_flow_attr sfx_attr = *attr;
+ uint32_t mtr = 0;
+ uint32_t mtr_tag_id = 0;
+ size_t act_size;
+ size_t item_size;
+ int actions_n = 0;
+ int ret;
+
+ if (priv->mtr_en)
+ actions_n = flow_check_meter_action(actions, &mtr);
+ if (mtr) {
+ struct mlx5_rte_flow_item_tag *tag_spec;
+ /* The five prefix actions: meter, decap, encap, tag, end. */
+ act_size = sizeof(struct rte_flow_action) * (actions_n + 5) +
+ sizeof(struct rte_flow_action_set_tag);
+ /* tag, end. */
+#define METER_SUFFIX_ITEM 3
+ item_size = sizeof(struct rte_flow_item) * METER_SUFFIX_ITEM +
+ sizeof(struct mlx5_rte_flow_item_tag);
+ sfx_actions = rte_zmalloc(__func__, (act_size + item_size), 0);
+ if (!sfx_actions)
+ return rte_flow_error_set(error, ENOMEM,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "no memory to split "
+ "meter flow");
+ pre_actions = sfx_actions + actions_n;
+ mtr_tag_id = flow_meter_split_prep(dev, actions, sfx_actions,
+ pre_actions);
+ if (!mtr_tag_id) {
+ ret = -rte_errno;
+ goto exit;
+ }
+ /* Add the prefix subflow. */
+ ret = flow_create_split_inner(dev, flow, &dev_flow, attr, items,
+ pre_actions, external, error);
+ if (ret) {
+ ret = -rte_errno;
+ goto exit;
+ }
+ dev_flow->mtr_flow_id = mtr_tag_id;
+ /* Prepare the suffix flow match pattern. */
+ sfx_items = (struct rte_flow_item *)((char *)sfx_actions +
+ act_size);
+ tag_spec = (struct mlx5_rte_flow_item_tag *)(sfx_items +
+ METER_SUFFIX_ITEM);
+ tag_spec->data = rte_cpu_to_be_32(dev_flow->mtr_flow_id);
+ tag_spec->id = mlx5_flow_get_reg_id(dev, MLX5_MTR_SFX, 0,
+ error);
+ sfx_items->type = MLX5_RTE_FLOW_ITEM_TYPE_TAG;
+ sfx_items->spec = tag_spec;
+ sfx_items->last = NULL;
+ sfx_items->mask = NULL;
+ sfx_items++;
+ sfx_port_id_item = find_port_id_item(items);
+ if (sfx_port_id_item) {
+ memcpy(sfx_items, sfx_port_id_item,
+ sizeof(*sfx_items));
+ sfx_items++;
+ }
+ sfx_items->type = RTE_FLOW_ITEM_TYPE_END;
+ sfx_items -= METER_SUFFIX_ITEM;
+ /* Setting the sfx group atrr. */
+ sfx_attr.group = sfx_attr.transfer ?
+ (MLX5_FLOW_TABLE_LEVEL_SUFFIX - 1) :
+ MLX5_FLOW_TABLE_LEVEL_SUFFIX;
+ }
+ /* Add the prefix subflow. */
+ ret = flow_create_split_metadata(dev, flow, &sfx_attr,
+ sfx_items ? sfx_items : items,
+ sfx_actions ? sfx_actions : actions,
+ external, error);
+exit:
+ if (sfx_actions)
+ rte_free(sfx_actions);
+ return ret;
+}
+
/**
* Split the flow to subflow set. The splitters might be linked
* in the chain, like this:
{
int ret;
- ret = flow_create_split_metadata(dev, flow, attr, items,
+ ret = flow_create_split_meter(dev, flow, attr, items,
actions, external, error);
assert(ret <= 0);
return ret;
*
* @param[in] dev
* Pointer to Ethernet device.
+ * @param[in] fm
+ * Pointer to the flow meter.
*
* @return
* Pointer to table set on success, NULL otherwise.
*/
struct mlx5_meter_domains_infos *
-mlx5_flow_create_mtr_tbls(struct rte_eth_dev *dev)
+mlx5_flow_create_mtr_tbls(struct rte_eth_dev *dev,
+ const struct mlx5_flow_meter *fm)
{
const struct mlx5_flow_driver_ops *fops;
fops = flow_get_drv_ops(MLX5_FLOW_TYPE_DV);
- return fops->create_mtr_tbls(dev);
+ return fops->create_mtr_tbls(dev, fm);
}
/**
return fops->destroy_mtr_tbls(dev, tbls);
}
+/**
+ * Create policer rules.
+ *
+ * @param[in] dev
+ * Pointer to Ethernet device.
+ * @param[in] fm
+ * Pointer to flow meter structure.
+ * @param[in] attr
+ * Pointer to flow attributes.
+ *
+ * @return
+ * 0 on success, -1 otherwise.
+ */
+int
+mlx5_flow_create_policer_rules(struct rte_eth_dev *dev,
+ struct mlx5_flow_meter *fm,
+ const struct rte_flow_attr *attr)
+{
+ const struct mlx5_flow_driver_ops *fops;
+
+ fops = flow_get_drv_ops(MLX5_FLOW_TYPE_DV);
+ return fops->create_policer_rules(dev, fm, attr);
+}
+
+/**
+ * Destroy policer rules.
+ *
+ * @param[in] fm
+ * Pointer to flow meter structure.
+ * @param[in] attr
+ * Pointer to flow attributes.
+ *
+ * @return
+ * 0 on success, -1 otherwise.
+ */
+int
+mlx5_flow_destroy_policer_rules(struct rte_eth_dev *dev,
+ struct mlx5_flow_meter *fm,
+ const struct rte_flow_attr *attr)
+{
+ const struct mlx5_flow_driver_ops *fops;
+
+ fops = flow_get_drv_ops(MLX5_FLOW_TYPE_DV);
+ return fops->destroy_policer_rules(dev, fm, attr);
+}
+
+/**
+ * Allocate a counter.
+ *
+ * @param[in] dev
+ * Pointer to Ethernet device structure.
+ *
+ * @return
+ * Pointer to allocated counter on success, NULL otherwise.
+ */
+struct mlx5_flow_counter *
+mlx5_counter_alloc(struct rte_eth_dev *dev)
+{
+ const struct mlx5_flow_driver_ops *fops;
+ struct rte_flow_attr attr = { .transfer = 0 };
+
+ if (flow_get_drv_type(dev, &attr) == MLX5_FLOW_TYPE_DV) {
+ fops = flow_get_drv_ops(MLX5_FLOW_TYPE_DV);
+ return fops->counter_alloc(dev);
+ }
+ DRV_LOG(ERR,
+ "port %u counter allocate is not supported.",
+ dev->data->port_id);
+ return NULL;
+}
+
+/**
+ * Free a counter.
+ *
+ * @param[in] dev
+ * Pointer to Ethernet device structure.
+ * @param[in] cnt
+ * Pointer to counter to be free.
+ */
+void
+mlx5_counter_free(struct rte_eth_dev *dev, struct mlx5_flow_counter *cnt)
+{
+ const struct mlx5_flow_driver_ops *fops;
+ struct rte_flow_attr attr = { .transfer = 0 };
+
+ if (flow_get_drv_type(dev, &attr) == MLX5_FLOW_TYPE_DV) {
+ fops = flow_get_drv_ops(MLX5_FLOW_TYPE_DV);
+ fops->counter_free(dev, cnt);
+ return;
+ }
+ DRV_LOG(ERR,
+ "port %u counter free is not supported.",
+ dev->data->port_id);
+}
+
+/**
+ * Query counter statistics.
+ *
+ * @param[in] dev
+ * Pointer to Ethernet device structure.
+ * @param[in] cnt
+ * Pointer to counter to query.
+ * @param[in] clear
+ * Set to clear counter statistics.
+ * @param[out] pkts
+ * The counter hits packets number to save.
+ * @param[out] bytes
+ * The counter hits bytes number to save.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise.
+ */
+int
+mlx5_counter_query(struct rte_eth_dev *dev, struct mlx5_flow_counter *cnt,
+ bool clear, uint64_t *pkts, uint64_t *bytes)
+{
+ const struct mlx5_flow_driver_ops *fops;
+ struct rte_flow_attr attr = { .transfer = 0 };
+
+ if (flow_get_drv_type(dev, &attr) == MLX5_FLOW_TYPE_DV) {
+ fops = flow_get_drv_ops(MLX5_FLOW_TYPE_DV);
+ return fops->counter_query(dev, cnt, clear, pkts, bytes);
+ }
+ DRV_LOG(ERR,
+ "port %u counter query is not supported.",
+ dev->data->port_id);
+ return -ENOTSUP;
+}
+
#define MLX5_POOL_QUERY_FREQ_US 1000000
/**