#include <string.h>
#include <stdlib.h>
-/* Verbs header. */
-/* ISO C doesn't support unnamed structs/unions, disabling -pedantic. */
-#ifdef PEDANTIC
-#pragma GCC diagnostic ignored "-Wpedantic"
-#endif
-#include <infiniband/verbs.h>
-#include <infiniband/mlx5dv.h>
-#ifdef PEDANTIC
-#pragma GCC diagnostic error "-Wpedantic"
-#endif
-
#include <rte_mbuf.h>
#include <rte_mempool.h>
#include <rte_prefetch.h>
#include <rte_cycles.h>
#include <rte_flow.h>
+#include <mlx5_glue.h>
#include <mlx5_devx_cmds.h>
#include <mlx5_prm.h>
#include <mlx5_common.h>
#include "mlx5_defs.h"
#include "mlx5.h"
+#include "mlx5_mr.h"
#include "mlx5_utils.h"
#include "mlx5_rxtx.h"
#include "mlx5_autoconf.h"
#define MLX5_TXOFF_CONFIG_METADATA (1u << 6) /* Flow metadata. */
#define MLX5_TXOFF_CONFIG_EMPW (1u << 8) /* Enhanced MPW supported.*/
#define MLX5_TXOFF_CONFIG_MPW (1u << 9) /* Legacy MPW supported.*/
+#define MLX5_TXOFF_CONFIG_TXPP (1u << 10) /* Scheduling on timestamp.*/
/* The most common offloads groups. */
#define MLX5_TXOFF_CONFIG_NONE 0
struct mlx5_mp_arg_queue_state_modify *sm);
static inline void
-mlx5_lro_update_tcp_hdr(struct rte_tcp_hdr *restrict tcp,
- volatile struct mlx5_cqe *restrict cqe,
+mlx5_lro_update_tcp_hdr(struct rte_tcp_hdr *__rte_restrict tcp,
+ volatile struct mlx5_cqe *__rte_restrict cqe,
uint32_t phcsum);
static inline void
-mlx5_lro_update_hdr(uint8_t *restrict padd,
- volatile struct mlx5_cqe *restrict cqe,
+mlx5_lro_update_hdr(uint8_t *__rte_restrict padd,
+ volatile struct mlx5_cqe *__rte_restrict cqe,
uint32_t len);
uint32_t mlx5_ptype_table[] __rte_cache_aligned = {
* Software Parser flags are set by pointer.
*/
static __rte_always_inline uint32_t
-txq_mbuf_to_swp(struct mlx5_txq_local *restrict loc,
+txq_mbuf_to_swp(struct mlx5_txq_local *__rte_restrict loc,
uint8_t *swp_flags,
unsigned int olx)
{
return RTE_ETH_RX_DESC_AVAIL;
}
+/**
+ * DPDK callback to get the RX queue information
+ *
+ * @param dev
+ * Pointer to the device structure.
+ *
+ * @param rx_queue_id
+ * Rx queue identificator.
+ *
+ * @param qinfo
+ * Pointer to the RX queue information structure.
+ *
+ * @return
+ * None.
+ */
+
+void
+mlx5_rxq_info_get(struct rte_eth_dev *dev, uint16_t rx_queue_id,
+ struct rte_eth_rxq_info *qinfo)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_rxq_data *rxq = (*priv->rxqs)[rx_queue_id];
+ struct mlx5_rxq_ctrl *rxq_ctrl =
+ container_of(rxq, struct mlx5_rxq_ctrl, rxq);
+
+ if (!rxq)
+ return;
+ qinfo->mp = mlx5_rxq_mprq_enabled(&rxq_ctrl->rxq) ?
+ rxq->mprq_mp : rxq->mp;
+ qinfo->conf.rx_thresh.pthresh = 0;
+ qinfo->conf.rx_thresh.hthresh = 0;
+ qinfo->conf.rx_thresh.wthresh = 0;
+ qinfo->conf.rx_free_thresh = rxq->rq_repl_thresh;
+ qinfo->conf.rx_drop_en = 1;
+ qinfo->conf.rx_deferred_start = rxq_ctrl ? 0 : 1;
+ qinfo->conf.offloads = dev->data->dev_conf.rxmode.offloads;
+ qinfo->scattered_rx = dev->data->scattered_rx;
+ qinfo->nb_desc = 1 << rxq->elts_n;
+}
+
+/**
+ * DPDK callback to get the RX packet burst mode information
+ *
+ * @param dev
+ * Pointer to the device structure.
+ *
+ * @param rx_queue_id
+ * Rx queue identificatior.
+ *
+ * @param mode
+ * Pointer to the burts mode information.
+ *
+ * @return
+ * 0 as success, -EINVAL as failure.
+ */
+
+int
+mlx5_rx_burst_mode_get(struct rte_eth_dev *dev,
+ uint16_t rx_queue_id __rte_unused,
+ struct rte_eth_burst_mode *mode)
+{
+ eth_rx_burst_t pkt_burst = dev->rx_pkt_burst;
+
+ if (pkt_burst == mlx5_rx_burst) {
+ snprintf(mode->info, sizeof(mode->info), "%s", "Scalar");
+ } else if (pkt_burst == mlx5_rx_burst_mprq) {
+ snprintf(mode->info, sizeof(mode->info), "%s", "Multi-Packet RQ");
+ } else if (pkt_burst == mlx5_rx_burst_vec) {
+#if defined RTE_ARCH_X86_64
+ snprintf(mode->info, sizeof(mode->info), "%s", "Vector SSE");
+#elif defined RTE_ARCH_ARM64
+ snprintf(mode->info, sizeof(mode->info), "%s", "Vector Neon");
+#elif defined RTE_ARCH_PPC_64
+ snprintf(mode->info, sizeof(mode->info), "%s", "Vector AltiVec");
+#else
+ return -EINVAL;
+#endif
+ } else {
+ return -EINVAL;
+ }
+ return 0;
+}
+
/**
* DPDK callback to get the number of used descriptors in a RX queue
*
* the error completion entry is handled successfully.
*/
static int
-mlx5_tx_error_cqe_handle(struct mlx5_txq_data *restrict txq,
+mlx5_tx_error_cqe_handle(struct mlx5_txq_data *__rte_restrict txq,
volatile struct mlx5_err_cqe *err_cqe)
{
if (err_cqe->syndrome != MLX5_CQE_SYNDROME_WR_FLUSH_ERR) {
struct mlx5_txq_data *txq = (*priv->txqs)[sm->queue_id];
struct mlx5_txq_ctrl *txq_ctrl =
container_of(txq, struct mlx5_txq_ctrl, txq);
- struct ibv_qp_attr mod = {
- .qp_state = IBV_QPS_RESET,
- .port_num = (uint8_t)priv->ibv_port,
- };
- struct ibv_qp *qp = txq_ctrl->obj->qp;
- ret = mlx5_glue->modify_qp(qp, &mod, IBV_QP_STATE);
- if (ret) {
- DRV_LOG(ERR, "Cannot change the Tx QP state to RESET "
- "%s", strerror(errno));
- rte_errno = errno;
- return ret;
- }
- mod.qp_state = IBV_QPS_INIT;
- ret = mlx5_glue->modify_qp(qp, &mod,
- (IBV_QP_STATE | IBV_QP_PORT));
- if (ret) {
- DRV_LOG(ERR, "Cannot change Tx QP state to INIT %s",
- strerror(errno));
- rte_errno = errno;
- return ret;
- }
- mod.qp_state = IBV_QPS_RTR;
- ret = mlx5_glue->modify_qp(qp, &mod, IBV_QP_STATE);
- if (ret) {
- DRV_LOG(ERR, "Cannot change Tx QP state to RTR %s",
- strerror(errno));
- rte_errno = errno;
- return ret;
- }
- mod.qp_state = IBV_QPS_RTS;
- ret = mlx5_glue->modify_qp(qp, &mod, IBV_QP_STATE);
- if (ret) {
- DRV_LOG(ERR, "Cannot change Tx QP state to RTS %s",
- strerror(errno));
- rte_errno = errno;
- return ret;
+ if (txq_ctrl->obj->type == MLX5_TXQ_OBJ_TYPE_DEVX_SQ) {
+ struct mlx5_devx_modify_sq_attr msq_attr = { 0 };
+
+ /* Change queue state to reset. */
+ msq_attr.sq_state = MLX5_SQC_STATE_ERR;
+ msq_attr.state = MLX5_SQC_STATE_RST;
+ ret = mlx5_devx_cmd_modify_sq(txq_ctrl->obj->sq_devx,
+ &msq_attr);
+ if (ret) {
+ DRV_LOG(ERR, "Cannot change the "
+ "Tx QP state to RESET %s",
+ strerror(errno));
+ rte_errno = errno;
+ return ret;
+ }
+ /* Change queue state to ready. */
+ msq_attr.sq_state = MLX5_SQC_STATE_RST;
+ msq_attr.state = MLX5_SQC_STATE_RDY;
+ ret = mlx5_devx_cmd_modify_sq(txq_ctrl->obj->sq_devx,
+ &msq_attr);
+ if (ret) {
+ DRV_LOG(ERR, "Cannot change the "
+ "Tx QP state to READY %s",
+ strerror(errno));
+ rte_errno = errno;
+ return ret;
+ }
+ } else {
+ struct ibv_qp_attr mod = {
+ .qp_state = IBV_QPS_RESET,
+ .port_num = (uint8_t)priv->dev_port,
+ };
+ struct ibv_qp *qp = txq_ctrl->obj->qp;
+
+ MLX5_ASSERT
+ (txq_ctrl->obj->type == MLX5_TXQ_OBJ_TYPE_IBV);
+
+ ret = mlx5_glue->modify_qp(qp, &mod, IBV_QP_STATE);
+ if (ret) {
+ DRV_LOG(ERR, "Cannot change the "
+ "Tx QP state to RESET %s",
+ strerror(errno));
+ rte_errno = errno;
+ return ret;
+ }
+ mod.qp_state = IBV_QPS_INIT;
+ ret = mlx5_glue->modify_qp(qp, &mod, IBV_QP_STATE);
+ if (ret) {
+ DRV_LOG(ERR, "Cannot change the "
+ "Tx QP state to INIT %s",
+ strerror(errno));
+ rte_errno = errno;
+ return ret;
+ }
+ mod.qp_state = IBV_QPS_RTR;
+ ret = mlx5_glue->modify_qp(qp, &mod, IBV_QP_STATE);
+ if (ret) {
+ DRV_LOG(ERR, "Cannot change the "
+ "Tx QP state to RTR %s",
+ strerror(errno));
+ rte_errno = errno;
+ return ret;
+ }
+ mod.qp_state = IBV_QPS_RTS;
+ ret = mlx5_glue->modify_qp(qp, &mod, IBV_QP_STATE);
+ if (ret) {
+ DRV_LOG(ERR, "Cannot change the "
+ "Tx QP state to RTS %s",
+ strerror(errno));
+ rte_errno = errno;
+ return ret;
+ }
}
}
return 0;
mlx5_queue_state_modify(struct rte_eth_dev *dev,
struct mlx5_mp_arg_queue_state_modify *sm)
{
+ struct mlx5_priv *priv = dev->data->dev_private;
int ret = 0;
switch (rte_eal_process_type()) {
ret = mlx5_queue_state_modify_primary(dev, sm);
break;
case RTE_PROC_SECONDARY:
- ret = mlx5_mp_req_queue_state_modify(dev, sm);
+ ret = mlx5_mp_req_queue_state_modify(&priv->mp_id, sm);
break;
default:
break;
pkt->hash.fdir.hi = mlx5_flow_mark_get(mark);
}
}
- if (rte_flow_dynf_metadata_avail() && cqe->flow_table_metadata) {
- pkt->ol_flags |= PKT_RX_DYNF_METADATA;
- *RTE_FLOW_DYNF_METADATA(pkt) = cqe->flow_table_metadata;
+ if (rxq->dynf_meta && cqe->flow_table_metadata) {
+ pkt->ol_flags |= rxq->flow_meta_mask;
+ *RTE_MBUF_DYNFIELD(pkt, rxq->flow_meta_offset, uint32_t *) =
+ cqe->flow_table_metadata;
}
if (rxq->csum)
pkt->ol_flags |= rxq_cq_to_ol_flags(cqe);
pkt->vlan_tci = rte_be_to_cpu_16(cqe->vlan_info);
}
if (rxq->hw_timestamp) {
- pkt->timestamp = rte_be_to_cpu_64(cqe->timestamp);
+ uint64_t ts = rte_be_to_cpu_64(cqe->timestamp);
+
+ if (rxq->rt_timestamp)
+ ts = mlx5_txpp_convert_rx_ts(rxq->sh, ts);
+ pkt->timestamp = ts;
pkt->ol_flags |= PKT_RX_TIMESTAMP;
}
}
* The L3 pseudo-header checksum.
*/
static inline void
-mlx5_lro_update_tcp_hdr(struct rte_tcp_hdr *restrict tcp,
- volatile struct mlx5_cqe *restrict cqe,
+mlx5_lro_update_tcp_hdr(struct rte_tcp_hdr *__rte_restrict tcp,
+ volatile struct mlx5_cqe *__rte_restrict cqe,
uint32_t phcsum)
{
uint8_t l4_type = (rte_be_to_cpu_16(cqe->hdr_type_etc) &
if (cqe->lro_tcppsh_abort_dupack & MLX5_CQE_LRO_PUSH_MASK)
tcp->tcp_flags |= RTE_TCP_PSH_FLAG;
tcp->cksum = 0;
- csum += rte_raw_cksum(tcp, (tcp->data_off & 0xF) * 4);
+ csum += rte_raw_cksum(tcp, (tcp->data_off >> 4) * 4);
csum = ((csum & 0xffff0000) >> 16) + (csum & 0xffff);
csum = (~csum) & 0xffff;
if (csum == 0)
* The packet length.
*/
static inline void
-mlx5_lro_update_hdr(uint8_t *restrict padd,
- volatile struct mlx5_cqe *restrict cqe,
+mlx5_lro_update_hdr(uint8_t *__rte_restrict padd,
+ volatile struct mlx5_cqe *__rte_restrict cqe,
uint32_t len)
{
union {
unsigned int i = 0;
uint32_t rq_ci = rxq->rq_ci;
uint16_t consumed_strd = rxq->consumed_strd;
- uint16_t headroom_sz = rxq->strd_headroom_en * RTE_PKTMBUF_HEADROOM;
struct mlx5_mprq_buf *buf = (*rxq->mprq_bufs)[rq_ci & wq_mask];
while (i < pkts_n) {
struct rte_mbuf *pkt;
void *addr;
int ret;
- unsigned int len;
+ uint32_t len;
uint16_t strd_cnt;
uint16_t strd_idx;
uint32_t offset;
uint32_t byte_cnt;
+ int32_t hdrm_overlap;
volatile struct mlx5_mini_cqe8 *mcqe = NULL;
uint32_t rss_hash_res = 0;
- uint8_t lro_num_seg;
if (consumed_strd == strd_n) {
/* Replace WQE only if the buffer is still in use. */
MLX5_ASSERT(strd_idx < strd_n);
MLX5_ASSERT(!((rte_be_to_cpu_16(cqe->wqe_id) ^ rq_ci) &
wq_mask));
- lro_num_seg = cqe->lro_num_seg;
- /*
- * Currently configured to receive a packet per a stride. But if
- * MTU is adjusted through kernel interface, device could
- * consume multiple strides without raising an error. In this
- * case, the packet should be dropped because it is bigger than
- * the max_rx_pkt_len.
- */
- if (unlikely(!lro_num_seg && strd_cnt > 1)) {
- ++rxq->stats.idropped;
- continue;
- }
pkt = rte_pktmbuf_alloc(rxq->mp);
if (unlikely(pkt == NULL)) {
++rxq->stats.rx_nombuf;
len -= RTE_ETHER_CRC_LEN;
offset = strd_idx * strd_sz + strd_shift;
addr = RTE_PTR_ADD(mlx5_mprq_buf_addr(buf, strd_n), offset);
+ hdrm_overlap = len + RTE_PKTMBUF_HEADROOM - strd_cnt * strd_sz;
/*
* Memcpy packets to the target mbuf if:
* - The size of packet is smaller than mprq_max_memcpy_len.
* - Out of buffer in the Mempool for Multi-Packet RQ.
+ * - The packet's stride overlaps a headroom and scatter is off.
*/
- if (len <= rxq->mprq_max_memcpy_len || rxq->mprq_repl == NULL) {
- /*
- * When memcpy'ing packet due to out-of-buffer, the
- * packet must be smaller than the target mbuf.
- */
- if (unlikely(rte_pktmbuf_tailroom(pkt) < len)) {
+ if (len <= rxq->mprq_max_memcpy_len ||
+ rxq->mprq_repl == NULL ||
+ (hdrm_overlap > 0 && !rxq->strd_scatter_en)) {
+ if (likely(rte_pktmbuf_tailroom(pkt) >= len)) {
+ rte_memcpy(rte_pktmbuf_mtod(pkt, void *),
+ addr, len);
+ DATA_LEN(pkt) = len;
+ } else if (rxq->strd_scatter_en) {
+ struct rte_mbuf *prev = pkt;
+ uint32_t seg_len =
+ RTE_MIN(rte_pktmbuf_tailroom(pkt), len);
+ uint32_t rem_len = len - seg_len;
+
+ rte_memcpy(rte_pktmbuf_mtod(pkt, void *),
+ addr, seg_len);
+ DATA_LEN(pkt) = seg_len;
+ while (rem_len) {
+ struct rte_mbuf *next =
+ rte_pktmbuf_alloc(rxq->mp);
+
+ if (unlikely(next == NULL)) {
+ rte_pktmbuf_free(pkt);
+ ++rxq->stats.rx_nombuf;
+ goto out;
+ }
+ NEXT(prev) = next;
+ SET_DATA_OFF(next, 0);
+ addr = RTE_PTR_ADD(addr, seg_len);
+ seg_len = RTE_MIN
+ (rte_pktmbuf_tailroom(next),
+ rem_len);
+ rte_memcpy
+ (rte_pktmbuf_mtod(next, void *),
+ addr, seg_len);
+ DATA_LEN(next) = seg_len;
+ rem_len -= seg_len;
+ prev = next;
+ ++NB_SEGS(pkt);
+ }
+ } else {
rte_pktmbuf_free_seg(pkt);
++rxq->stats.idropped;
continue;
}
- rte_memcpy(rte_pktmbuf_mtod(pkt, void *), addr, len);
- DATA_LEN(pkt) = len;
} else {
rte_iova_t buf_iova;
struct rte_mbuf_ext_shared_info *shinfo;
rte_atomic16_add_return(&buf->refcnt, 1);
MLX5_ASSERT((uint16_t)rte_atomic16_read(&buf->refcnt) <=
strd_n + 1);
- buf_addr = RTE_PTR_SUB(addr, headroom_sz);
+ buf_addr = RTE_PTR_SUB(addr, RTE_PKTMBUF_HEADROOM);
/*
* MLX5 device doesn't use iova but it is necessary in a
* case where the Rx packet is transmitted via a
rte_pktmbuf_attach_extbuf(pkt, buf_addr, buf_iova,
buf_len, shinfo);
/* Set mbuf head-room. */
- pkt->data_off = headroom_sz;
+ SET_DATA_OFF(pkt, RTE_PKTMBUF_HEADROOM);
MLX5_ASSERT(pkt->ol_flags == EXT_ATTACHED_MBUF);
- /*
- * Prevent potential overflow due to MTU change through
- * kernel interface.
- */
- if (unlikely(rte_pktmbuf_tailroom(pkt) < len)) {
- rte_pktmbuf_free_seg(pkt);
- ++rxq->stats.idropped;
- continue;
- }
+ MLX5_ASSERT(rte_pktmbuf_tailroom(pkt) >=
+ len - (hdrm_overlap > 0 ? hdrm_overlap : 0));
DATA_LEN(pkt) = len;
/*
- * LRO packet may consume all the stride memory, in this
- * case packet head-room space is not guaranteed so must
- * to add an empty mbuf for the head-room.
+ * Copy the last fragment of a packet (up to headroom
+ * size bytes) in case there is a stride overlap with
+ * a next packet's headroom. Allocate a separate mbuf
+ * to store this fragment and link it. Scatter is on.
*/
- if (!rxq->strd_headroom_en) {
- struct rte_mbuf *headroom_mbuf =
- rte_pktmbuf_alloc(rxq->mp);
+ if (hdrm_overlap > 0) {
+ MLX5_ASSERT(rxq->strd_scatter_en);
+ struct rte_mbuf *seg =
+ rte_pktmbuf_alloc(rxq->mp);
- if (unlikely(headroom_mbuf == NULL)) {
+ if (unlikely(seg == NULL)) {
rte_pktmbuf_free_seg(pkt);
++rxq->stats.rx_nombuf;
break;
}
- PORT(pkt) = rxq->port_id;
- NEXT(headroom_mbuf) = pkt;
- pkt = headroom_mbuf;
+ SET_DATA_OFF(seg, 0);
+ rte_memcpy(rte_pktmbuf_mtod(seg, void *),
+ RTE_PTR_ADD(addr, len - hdrm_overlap),
+ hdrm_overlap);
+ DATA_LEN(seg) = hdrm_overlap;
+ DATA_LEN(pkt) = len - hdrm_overlap;
+ NEXT(pkt) = seg;
NB_SEGS(pkt) = 2;
}
}
rxq_cq_to_mbuf(rxq, pkt, cqe, rss_hash_res);
- if (lro_num_seg > 1) {
+ if (cqe->lro_num_seg > 1) {
mlx5_lro_update_hdr(addr, cqe, len);
pkt->ol_flags |= PKT_RX_LRO;
- pkt->tso_segsz = strd_sz;
+ pkt->tso_segsz = len / cqe->lro_num_seg;
}
PKT_LEN(pkt) = len;
PORT(pkt) = rxq->port_id;
*(pkts++) = pkt;
++i;
}
+out:
/* Update the consumer indexes. */
rxq->consumed_strd = consumed_strd;
rte_cio_wmb();
* compile time and may be used for optimization.
*/
static __rte_always_inline void
-mlx5_tx_free_mbuf(struct rte_mbuf **restrict pkts,
+mlx5_tx_free_mbuf(struct rte_mbuf **__rte_restrict pkts,
unsigned int pkts_n,
unsigned int olx __rte_unused)
{
* compile time and may be used for optimization.
*/
static __rte_always_inline void
-mlx5_tx_free_elts(struct mlx5_txq_data *restrict txq,
+mlx5_tx_free_elts(struct mlx5_txq_data *__rte_restrict txq,
uint16_t tail,
unsigned int olx __rte_unused)
{
* compile time and may be used for optimization.
*/
static __rte_always_inline void
-mlx5_tx_copy_elts(struct mlx5_txq_data *restrict txq,
- struct rte_mbuf **restrict pkts,
+mlx5_tx_copy_elts(struct mlx5_txq_data *__rte_restrict txq,
+ struct rte_mbuf **__rte_restrict pkts,
unsigned int pkts_n,
unsigned int olx __rte_unused)
{
* compile time and may be used for optimization.
*/
static __rte_always_inline void
-mlx5_tx_comp_flush(struct mlx5_txq_data *restrict txq,
+mlx5_tx_comp_flush(struct mlx5_txq_data *__rte_restrict txq,
volatile struct mlx5_cqe *last_cqe,
unsigned int olx __rte_unused)
{
* routine smaller, simple and faster - from experiments.
*/
static void
-mlx5_tx_handle_completion(struct mlx5_txq_data *restrict txq,
+mlx5_tx_handle_completion(struct mlx5_txq_data *__rte_restrict txq,
unsigned int olx __rte_unused)
{
unsigned int count = MLX5_TX_COMP_MAX_CQE;
volatile struct mlx5_cqe *last_cqe = NULL;
- uint16_t ci = txq->cq_ci;
+ bool ring_doorbell = false;
int ret;
static_assert(MLX5_CQE_STATUS_HW_OWN < 0, "Must be negative value");
do {
volatile struct mlx5_cqe *cqe;
- cqe = &txq->cqes[ci & txq->cqe_m];
- ret = check_cqe(cqe, txq->cqe_s, ci);
+ cqe = &txq->cqes[txq->cq_ci & txq->cqe_m];
+ ret = check_cqe(cqe, txq->cqe_s, txq->cq_ci);
if (unlikely(ret != MLX5_CQE_STATUS_SW_OWN)) {
if (likely(ret != MLX5_CQE_STATUS_ERR)) {
/* No new CQEs in completion queue. */
* here, before we might perform SQ reset.
*/
rte_wmb();
- txq->cq_ci = ci;
ret = mlx5_tx_error_cqe_handle
(txq, (volatile struct mlx5_err_cqe *)cqe);
if (unlikely(ret < 0)) {
* MLX5_CQE_SYNDROME_WR_FLUSH_ERR status.
* The send queue is supposed to be empty.
*/
- ++ci;
- txq->cq_pi = ci;
+ ring_doorbell = true;
+ ++txq->cq_ci;
+ txq->cq_pi = txq->cq_ci;
last_cqe = NULL;
continue;
}
/* Normal transmit completion. */
- MLX5_ASSERT(ci != txq->cq_pi);
- MLX5_ASSERT((txq->fcqs[ci & txq->cqe_m] >> 16) ==
+ MLX5_ASSERT(txq->cq_ci != txq->cq_pi);
+ MLX5_ASSERT((txq->fcqs[txq->cq_ci & txq->cqe_m] >> 16) ==
cqe->wqe_counter);
- ++ci;
+ ring_doorbell = true;
+ ++txq->cq_ci;
last_cqe = cqe;
/*
* We have to restrict the amount of processed CQEs
if (likely(--count == 0))
break;
} while (true);
- if (likely(ci != txq->cq_ci)) {
- /*
- * Update completion queue consuming index
- * and ring doorbell to notify hardware.
- */
+ if (likely(ring_doorbell)) {
+ /* Ring doorbell to notify hardware. */
rte_compiler_barrier();
- txq->cq_ci = ci;
- *txq->cq_db = rte_cpu_to_be_32(ci);
+ *txq->cq_db = rte_cpu_to_be_32(txq->cq_ci);
mlx5_tx_comp_flush(txq, last_cqe, olx);
}
}
* compile time and may be used for optimization.
*/
static __rte_always_inline void
-mlx5_tx_request_completion(struct mlx5_txq_data *restrict txq,
- struct mlx5_txq_local *restrict loc,
+mlx5_tx_request_completion(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
unsigned int olx)
{
uint16_t head = txq->elts_head;
(uint16_t)(txq->wqe_ci - txq->wqe_comp) >= txq->wqe_thres)) {
volatile struct mlx5_wqe *last = loc->wqe_last;
+ MLX5_ASSERT(last);
txq->elts_comp = head;
if (MLX5_TXOFF_CONFIG(INLINE))
txq->wqe_comp = txq->wqe_ci;
int
mlx5_tx_descriptor_status(void *tx_queue, uint16_t offset)
{
- struct mlx5_txq_data *restrict txq = tx_queue;
+ struct mlx5_txq_data *__rte_restrict txq = tx_queue;
uint16_t used;
mlx5_tx_handle_completion(txq, 0);
* compile time and may be used for optimization.
*/
static __rte_always_inline void
-mlx5_tx_cseg_init(struct mlx5_txq_data *restrict txq,
- struct mlx5_txq_local *restrict loc __rte_unused,
- struct mlx5_wqe *restrict wqe,
+mlx5_tx_cseg_init(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc __rte_unused,
+ struct mlx5_wqe *__rte_restrict wqe,
unsigned int ds,
unsigned int opcode,
unsigned int olx __rte_unused)
{
- struct mlx5_wqe_cseg *restrict cs = &wqe->cseg;
+ struct mlx5_wqe_cseg *__rte_restrict cs = &wqe->cseg;
/* For legacy MPW replace the EMPW by TSO with modifier. */
if (MLX5_TXOFF_CONFIG(MPW) && opcode == MLX5_OPCODE_ENHANCED_MPSW)
cs->misc = RTE_BE32(0);
}
+/**
+ * Build the Synchronize Queue Segment with specified completion index.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param wqe
+ * Pointer to WQE to fill with built Control Segment.
+ * @param wci
+ * Completion index in Clock Queue to wait.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ */
+static __rte_always_inline void
+mlx5_tx_wseg_init(struct mlx5_txq_data *restrict txq,
+ struct mlx5_txq_local *restrict loc __rte_unused,
+ struct mlx5_wqe *restrict wqe,
+ unsigned int wci,
+ unsigned int olx __rte_unused)
+{
+ struct mlx5_wqe_qseg *qs;
+
+ qs = RTE_PTR_ADD(wqe, MLX5_WSEG_SIZE);
+ qs->max_index = rte_cpu_to_be_32(wci);
+ qs->qpn_cqn = rte_cpu_to_be_32(txq->sh->txpp.clock_queue.cq->id);
+ qs->reserved0 = RTE_BE32(0);
+ qs->reserved1 = RTE_BE32(0);
+}
+
/**
* Build the Ethernet Segment without inlined data.
* Supports Software Parser, Checksums and VLAN
* compile time and may be used for optimization.
*/
static __rte_always_inline void
-mlx5_tx_eseg_none(struct mlx5_txq_data *restrict txq __rte_unused,
- struct mlx5_txq_local *restrict loc,
- struct mlx5_wqe *restrict wqe,
+mlx5_tx_eseg_none(struct mlx5_txq_data *__rte_restrict txq __rte_unused,
+ struct mlx5_txq_local *__rte_restrict loc,
+ struct mlx5_wqe *__rte_restrict wqe,
unsigned int olx)
{
- struct mlx5_wqe_eseg *restrict es = &wqe->eseg;
+ struct mlx5_wqe_eseg *__rte_restrict es = &wqe->eseg;
uint32_t csum;
/*
* compile time and may be used for optimization.
*/
static __rte_always_inline void
-mlx5_tx_eseg_dmin(struct mlx5_txq_data *restrict txq __rte_unused,
- struct mlx5_txq_local *restrict loc,
- struct mlx5_wqe *restrict wqe,
+mlx5_tx_eseg_dmin(struct mlx5_txq_data *__rte_restrict txq __rte_unused,
+ struct mlx5_txq_local *__rte_restrict loc,
+ struct mlx5_wqe *__rte_restrict wqe,
unsigned int vlan,
unsigned int olx)
{
- struct mlx5_wqe_eseg *restrict es = &wqe->eseg;
+ struct mlx5_wqe_eseg *__rte_restrict es = &wqe->eseg;
uint32_t csum;
uint8_t *psrc, *pdst;
* Pointer to the next Data Segment (aligned and wrapped around).
*/
static __rte_always_inline struct mlx5_wqe_dseg *
-mlx5_tx_eseg_data(struct mlx5_txq_data *restrict txq,
- struct mlx5_txq_local *restrict loc,
- struct mlx5_wqe *restrict wqe,
+mlx5_tx_eseg_data(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
+ struct mlx5_wqe *__rte_restrict wqe,
unsigned int vlan,
unsigned int inlen,
unsigned int tso,
unsigned int olx)
{
- struct mlx5_wqe_eseg *restrict es = &wqe->eseg;
+ struct mlx5_wqe_eseg *__rte_restrict es = &wqe->eseg;
uint32_t csum;
uint8_t *psrc, *pdst;
unsigned int part;
*/
static __rte_always_inline unsigned int
mlx5_tx_mseg_memcpy(uint8_t *pdst,
- struct mlx5_txq_local *restrict loc,
+ struct mlx5_txq_local *__rte_restrict loc,
unsigned int len,
unsigned int must,
unsigned int olx __rte_unused)
* wrapping check on its own).
*/
static __rte_always_inline struct mlx5_wqe_dseg *
-mlx5_tx_eseg_mdat(struct mlx5_txq_data *restrict txq,
- struct mlx5_txq_local *restrict loc,
- struct mlx5_wqe *restrict wqe,
+mlx5_tx_eseg_mdat(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
+ struct mlx5_wqe *__rte_restrict wqe,
unsigned int vlan,
unsigned int inlen,
unsigned int tso,
unsigned int olx)
{
- struct mlx5_wqe_eseg *restrict es = &wqe->eseg;
+ struct mlx5_wqe_eseg *__rte_restrict es = &wqe->eseg;
uint32_t csum;
uint8_t *pdst;
unsigned int part, tlen = 0;
* compile time and may be used for optimization.
*/
static __rte_always_inline void
-mlx5_tx_dseg_ptr(struct mlx5_txq_data *restrict txq,
- struct mlx5_txq_local *restrict loc,
- struct mlx5_wqe_dseg *restrict dseg,
+mlx5_tx_dseg_ptr(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
+ struct mlx5_wqe_dseg *__rte_restrict dseg,
uint8_t *buf,
unsigned int len,
unsigned int olx __rte_unused)
* compile time and may be used for optimization.
*/
static __rte_always_inline void
-mlx5_tx_dseg_iptr(struct mlx5_txq_data *restrict txq,
- struct mlx5_txq_local *restrict loc,
- struct mlx5_wqe_dseg *restrict dseg,
+mlx5_tx_dseg_iptr(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
+ struct mlx5_wqe_dseg *__rte_restrict dseg,
uint8_t *buf,
unsigned int len,
unsigned int olx __rte_unused)
* last packet in the eMPW session.
*/
static __rte_always_inline struct mlx5_wqe_dseg *
-mlx5_tx_dseg_empw(struct mlx5_txq_data *restrict txq,
- struct mlx5_txq_local *restrict loc __rte_unused,
- struct mlx5_wqe_dseg *restrict dseg,
+mlx5_tx_dseg_empw(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc __rte_unused,
+ struct mlx5_wqe_dseg *__rte_restrict dseg,
uint8_t *buf,
unsigned int len,
unsigned int olx __rte_unused)
unsigned int part;
uint8_t *pdst;
- dseg->bcount = rte_cpu_to_be_32(len | MLX5_ETH_WQE_DATA_INLINE);
- pdst = &dseg->inline_data[0];
+ if (!MLX5_TXOFF_CONFIG(MPW)) {
+ /* Store the descriptor byte counter for eMPW sessions. */
+ dseg->bcount = rte_cpu_to_be_32(len | MLX5_ETH_WQE_DATA_INLINE);
+ pdst = &dseg->inline_data[0];
+ } else {
+ /* The entire legacy MPW session counter is stored on close. */
+ pdst = (uint8_t *)dseg;
+ }
/*
* The WQEBB space availability is checked by caller.
* Here we should be aware of WQE ring buffer wraparound only.
len -= part;
if (likely(!len)) {
pdst += part;
- pdst = RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE);
+ if (!MLX5_TXOFF_CONFIG(MPW))
+ pdst = RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE);
/* Note: no final wraparound check here. */
return (struct mlx5_wqe_dseg *)pdst;
}
* Ring buffer wraparound check is needed.
*/
static __rte_always_inline struct mlx5_wqe_dseg *
-mlx5_tx_dseg_vlan(struct mlx5_txq_data *restrict txq,
- struct mlx5_txq_local *restrict loc __rte_unused,
- struct mlx5_wqe_dseg *restrict dseg,
+mlx5_tx_dseg_vlan(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc __rte_unused,
+ struct mlx5_wqe_dseg *__rte_restrict dseg,
uint8_t *buf,
unsigned int len,
unsigned int olx __rte_unused)
static_assert(MLX5_DSEG_MIN_INLINE_SIZE ==
(2 * RTE_ETHER_ADDR_LEN),
"invalid Data Segment data size");
- dseg->bcount = rte_cpu_to_be_32((len + sizeof(struct rte_vlan_hdr)) |
- MLX5_ETH_WQE_DATA_INLINE);
- pdst = &dseg->inline_data[0];
+ if (!MLX5_TXOFF_CONFIG(MPW)) {
+ /* Store the descriptor byte counter for eMPW sessions. */
+ dseg->bcount = rte_cpu_to_be_32
+ ((len + sizeof(struct rte_vlan_hdr)) |
+ MLX5_ETH_WQE_DATA_INLINE);
+ pdst = &dseg->inline_data[0];
+ } else {
+ /* The entire legacy MPW session counter is stored on close. */
+ pdst = (uint8_t *)dseg;
+ }
memcpy(pdst, buf, MLX5_DSEG_MIN_INLINE_SIZE);
buf += MLX5_DSEG_MIN_INLINE_SIZE;
pdst += MLX5_DSEG_MIN_INLINE_SIZE;
len -= part;
if (likely(!len)) {
pdst += part;
- pdst = RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE);
+ if (!MLX5_TXOFF_CONFIG(MPW))
+ pdst = RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE);
/* Note: no final wraparound check here. */
return (struct mlx5_wqe_dseg *)pdst;
}
* Actual size of built WQE in segments.
*/
static __rte_always_inline unsigned int
-mlx5_tx_mseg_build(struct mlx5_txq_data *restrict txq,
- struct mlx5_txq_local *restrict loc,
- struct mlx5_wqe *restrict wqe,
+mlx5_tx_mseg_build(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
+ struct mlx5_wqe *__rte_restrict wqe,
unsigned int vlan,
unsigned int inlen,
unsigned int tso,
unsigned int olx __rte_unused)
{
- struct mlx5_wqe_dseg *restrict dseg;
+ struct mlx5_wqe_dseg *__rte_restrict dseg;
unsigned int ds;
MLX5_ASSERT((rte_pktmbuf_pkt_len(loc->mbuf) + vlan) >= inlen);
return ds;
}
+/**
+ * The routine checks timestamp flag in the current packet,
+ * and push WAIT WQE into the queue if scheduling is required.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
+ * MLX5_TXCMP_CODE_SINGLE - continue processing with the packet.
+ * MLX5_TXCMP_CODE_MULTI - the WAIT inserted, continue processing.
+ * Local context variables partially updated.
+ */
+static __rte_always_inline enum mlx5_txcmp_code
+mlx5_tx_schedule_send(struct mlx5_txq_data *restrict txq,
+ struct mlx5_txq_local *restrict loc,
+ unsigned int olx)
+{
+ if (MLX5_TXOFF_CONFIG(TXPP) &&
+ loc->mbuf->ol_flags & txq->ts_mask) {
+ struct mlx5_wqe *wqe;
+ uint64_t ts;
+ int32_t wci;
+
+ /*
+ * Estimate the required space quickly and roughly.
+ * We would like to ensure the packet can be pushed
+ * to the queue and we won't get the orphan WAIT WQE.
+ */
+ if (loc->wqe_free <= MLX5_WQE_SIZE_MAX / MLX5_WQE_SIZE ||
+ loc->elts_free < NB_SEGS(loc->mbuf))
+ return MLX5_TXCMP_CODE_EXIT;
+ /* Convert the timestamp into completion to wait. */
+ ts = *RTE_MBUF_DYNFIELD(loc->mbuf, txq->ts_offset, uint64_t *);
+ wci = mlx5_txpp_convert_tx_ts(txq->sh, ts);
+ if (unlikely(wci < 0))
+ return MLX5_TXCMP_CODE_SINGLE;
+ /* Build the WAIT WQE with specified completion. */
+ wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
+ mlx5_tx_cseg_init(txq, loc, wqe, 2, MLX5_OPCODE_WAIT, olx);
+ mlx5_tx_wseg_init(txq, loc, wqe, wci, olx);
+ ++txq->wqe_ci;
+ --loc->wqe_free;
+ return MLX5_TXCMP_CODE_MULTI;
+ }
+ return MLX5_TXCMP_CODE_SINGLE;
+}
+
/**
* Tx one packet function for multi-segment TSO. Supports all
* types of Tx offloads, uses MLX5_OPCODE_TSO to build WQEs,
* Local context variables partially updated.
*/
static __rte_always_inline enum mlx5_txcmp_code
-mlx5_tx_packet_multi_tso(struct mlx5_txq_data *restrict txq,
- struct mlx5_txq_local *restrict loc,
+mlx5_tx_packet_multi_tso(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
unsigned int olx)
{
- struct mlx5_wqe *restrict wqe;
+ struct mlx5_wqe *__rte_restrict wqe;
unsigned int ds, dlen, inlen, ntcp, vlan = 0;
+ if (MLX5_TXOFF_CONFIG(TXPP)) {
+ enum mlx5_txcmp_code wret;
+
+ /* Generate WAIT for scheduling if requested. */
+ wret = mlx5_tx_schedule_send(txq, loc, olx);
+ if (wret == MLX5_TXCMP_CODE_EXIT)
+ return MLX5_TXCMP_CODE_EXIT;
+ if (wret == MLX5_TXCMP_CODE_ERROR)
+ return MLX5_TXCMP_CODE_ERROR;
+ }
/*
* Calculate data length to be inlined to estimate
* the required space in WQE ring buffer.
* Local context variables partially updated.
*/
static __rte_always_inline enum mlx5_txcmp_code
-mlx5_tx_packet_multi_send(struct mlx5_txq_data *restrict txq,
- struct mlx5_txq_local *restrict loc,
+mlx5_tx_packet_multi_send(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
unsigned int olx)
{
- struct mlx5_wqe_dseg *restrict dseg;
- struct mlx5_wqe *restrict wqe;
+ struct mlx5_wqe_dseg *__rte_restrict dseg;
+ struct mlx5_wqe *__rte_restrict wqe;
unsigned int ds, nseg;
MLX5_ASSERT(NB_SEGS(loc->mbuf) > 1);
+ if (MLX5_TXOFF_CONFIG(TXPP)) {
+ enum mlx5_txcmp_code wret;
+
+ /* Generate WAIT for scheduling if requested. */
+ wret = mlx5_tx_schedule_send(txq, loc, olx);
+ if (wret == MLX5_TXCMP_CODE_EXIT)
+ return MLX5_TXCMP_CODE_EXIT;
+ if (wret == MLX5_TXCMP_CODE_ERROR)
+ return MLX5_TXCMP_CODE_ERROR;
+ }
/*
* No inline at all, it means the CPU cycles saving
* is prioritized at configuration, we should not
* Local context variables partially updated.
*/
static __rte_always_inline enum mlx5_txcmp_code
-mlx5_tx_packet_multi_inline(struct mlx5_txq_data *restrict txq,
- struct mlx5_txq_local *restrict loc,
+mlx5_tx_packet_multi_inline(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
unsigned int olx)
{
- struct mlx5_wqe *restrict wqe;
+ struct mlx5_wqe *__rte_restrict wqe;
unsigned int ds, inlen, dlen, vlan = 0;
MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
MLX5_ASSERT(NB_SEGS(loc->mbuf) > 1);
+ if (MLX5_TXOFF_CONFIG(TXPP)) {
+ enum mlx5_txcmp_code wret;
+
+ /* Generate WAIT for scheduling if requested. */
+ wret = mlx5_tx_schedule_send(txq, loc, olx);
+ if (wret == MLX5_TXCMP_CODE_EXIT)
+ return MLX5_TXCMP_CODE_EXIT;
+ if (wret == MLX5_TXCMP_CODE_ERROR)
+ return MLX5_TXCMP_CODE_ERROR;
+ }
/*
* First calculate data length to be inlined
* to estimate the required space for WQE.
* Local context variables updated.
*/
static __rte_always_inline enum mlx5_txcmp_code
-mlx5_tx_burst_mseg(struct mlx5_txq_data *restrict txq,
- struct rte_mbuf **restrict pkts,
+mlx5_tx_burst_mseg(struct mlx5_txq_data *__rte_restrict txq,
+ struct rte_mbuf **__rte_restrict pkts,
unsigned int pkts_n,
- struct mlx5_txq_local *restrict loc,
+ struct mlx5_txq_local *__rte_restrict loc,
unsigned int olx)
{
MLX5_ASSERT(loc->elts_free && loc->wqe_free);
* Local context variables updated.
*/
static __rte_always_inline enum mlx5_txcmp_code
-mlx5_tx_burst_tso(struct mlx5_txq_data *restrict txq,
- struct rte_mbuf **restrict pkts,
+mlx5_tx_burst_tso(struct mlx5_txq_data *__rte_restrict txq,
+ struct rte_mbuf **__rte_restrict pkts,
unsigned int pkts_n,
- struct mlx5_txq_local *restrict loc,
+ struct mlx5_txq_local *__rte_restrict loc,
unsigned int olx)
{
MLX5_ASSERT(loc->elts_free && loc->wqe_free);
pkts += loc->pkts_sent + 1;
pkts_n -= loc->pkts_sent;
for (;;) {
- struct mlx5_wqe_dseg *restrict dseg;
- struct mlx5_wqe *restrict wqe;
+ struct mlx5_wqe_dseg *__rte_restrict dseg;
+ struct mlx5_wqe *__rte_restrict wqe;
unsigned int ds, dlen, hlen, ntcp, vlan = 0;
uint8_t *dptr;
MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
+ if (MLX5_TXOFF_CONFIG(TXPP)) {
+ enum mlx5_txcmp_code wret;
+
+ /* Generate WAIT for scheduling if requested. */
+ wret = mlx5_tx_schedule_send(txq, loc, olx);
+ if (wret == MLX5_TXCMP_CODE_EXIT)
+ return MLX5_TXCMP_CODE_EXIT;
+ if (wret == MLX5_TXCMP_CODE_ERROR)
+ return MLX5_TXCMP_CODE_ERROR;
+ }
dlen = rte_pktmbuf_data_len(loc->mbuf);
if (MLX5_TXOFF_CONFIG(VLAN) &&
loc->mbuf->ol_flags & PKT_TX_VLAN_PKT) {
* MLX5_TXCMP_CODE_EMPW - single-segment packet, use MPW.
*/
static __rte_always_inline enum mlx5_txcmp_code
-mlx5_tx_able_to_empw(struct mlx5_txq_data *restrict txq,
- struct mlx5_txq_local *restrict loc,
+mlx5_tx_able_to_empw(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
unsigned int olx,
bool newp)
{
* false - no match, eMPW should be restarted.
*/
static __rte_always_inline bool
-mlx5_tx_match_empw(struct mlx5_txq_data *restrict txq __rte_unused,
- struct mlx5_wqe_eseg *restrict es,
- struct mlx5_txq_local *restrict loc,
+mlx5_tx_match_empw(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_wqe_eseg *__rte_restrict es,
+ struct mlx5_txq_local *__rte_restrict loc,
uint32_t dlen,
unsigned int olx)
{
/* There must be no VLAN packets in eMPW loop. */
if (MLX5_TXOFF_CONFIG(VLAN))
MLX5_ASSERT(!(loc->mbuf->ol_flags & PKT_TX_VLAN_PKT));
+ /* Check if the scheduling is requested. */
+ if (MLX5_TXOFF_CONFIG(TXPP) &&
+ loc->mbuf->ol_flags & txq->ts_mask)
+ return false;
return true;
}
* false - no match, eMPW should be restarted.
*/
static __rte_always_inline void
-mlx5_tx_sdone_empw(struct mlx5_txq_data *restrict txq,
- struct mlx5_txq_local *restrict loc,
+mlx5_tx_sdone_empw(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
unsigned int ds,
unsigned int slen,
unsigned int olx __rte_unused)
* Total size of descriptor/data in bytes.
* @param slen
* Accumulated statistics, data bytes sent.
+ * @param wqem
+ * The base WQE for the eMPW/MPW descriptor.
* @param olx
* Configured Tx offloads mask. It is fully defined at
* compile time and may be used for optimization.
* false - no match, eMPW should be restarted.
*/
static __rte_always_inline void
-mlx5_tx_idone_empw(struct mlx5_txq_data *restrict txq,
- struct mlx5_txq_local *restrict loc,
+mlx5_tx_idone_empw(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
unsigned int len,
unsigned int slen,
+ struct mlx5_wqe *__rte_restrict wqem,
unsigned int olx __rte_unused)
{
+ struct mlx5_wqe_dseg *dseg = &wqem->dseg[0];
+
MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
- MLX5_ASSERT((len % MLX5_WSEG_SIZE) == 0);
#ifdef MLX5_PMD_SOFT_COUNTERS
/* Update sent data bytes counter. */
txq->stats.obytes += slen;
#else
(void)slen;
#endif
- len = len / MLX5_WSEG_SIZE + 2;
- loc->wqe_last->cseg.sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | len);
+ if (MLX5_TXOFF_CONFIG(MPW) && dseg->bcount == RTE_BE32(0)) {
+ /*
+ * If the legacy MPW session contains the inline packets
+ * we should set the only inline data segment length
+ * and align the total length to the segment size.
+ */
+ MLX5_ASSERT(len > sizeof(dseg->bcount));
+ dseg->bcount = rte_cpu_to_be_32((len - sizeof(dseg->bcount)) |
+ MLX5_ETH_WQE_DATA_INLINE);
+ len = (len + MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE + 2;
+ } else {
+ /*
+ * The session is not legacy MPW or contains the
+ * data buffer pointer segments.
+ */
+ MLX5_ASSERT((len % MLX5_WSEG_SIZE) == 0);
+ len = len / MLX5_WSEG_SIZE + 2;
+ }
+ wqem->cseg.sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | len);
txq->wqe_ci += (len + 3) / 4;
loc->wqe_free -= (len + 3) / 4;
+ loc->wqe_last = wqem;
}
/**
* No VLAN insertion is supported.
*/
static __rte_always_inline enum mlx5_txcmp_code
-mlx5_tx_burst_empw_simple(struct mlx5_txq_data *restrict txq,
- struct rte_mbuf **restrict pkts,
+mlx5_tx_burst_empw_simple(struct mlx5_txq_data *__rte_restrict txq,
+ struct rte_mbuf **__rte_restrict pkts,
unsigned int pkts_n,
- struct mlx5_txq_local *restrict loc,
+ struct mlx5_txq_local *__rte_restrict loc,
unsigned int olx)
{
/*
pkts += loc->pkts_sent + 1;
pkts_n -= loc->pkts_sent;
for (;;) {
- struct mlx5_wqe_dseg *restrict dseg;
- struct mlx5_wqe_eseg *restrict eseg;
+ struct mlx5_wqe_dseg *__rte_restrict dseg;
+ struct mlx5_wqe_eseg *__rte_restrict eseg;
enum mlx5_txcmp_code ret;
unsigned int part, loop;
unsigned int slen = 0;
next_empw:
MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
+ if (MLX5_TXOFF_CONFIG(TXPP)) {
+ enum mlx5_txcmp_code wret;
+
+ /* Generate WAIT for scheduling if requested. */
+ wret = mlx5_tx_schedule_send(txq, loc, olx);
+ if (wret == MLX5_TXCMP_CODE_EXIT)
+ return MLX5_TXCMP_CODE_EXIT;
+ if (wret == MLX5_TXCMP_CODE_ERROR)
+ return MLX5_TXCMP_CODE_ERROR;
+ }
part = RTE_MIN(pkts_n, MLX5_TXOFF_CONFIG(MPW) ?
MLX5_MPW_MAX_PACKETS :
MLX5_EMPW_MAX_PACKETS);
* - metadata value
* - software parser settings
* - packets length (legacy MPW only)
+ * - scheduling is not required
*/
if (!mlx5_tx_match_empw(txq, eseg, loc, dlen, olx)) {
MLX5_ASSERT(loop);
* with inlining, optionally supports VLAN insertion.
*/
static __rte_always_inline enum mlx5_txcmp_code
-mlx5_tx_burst_empw_inline(struct mlx5_txq_data *restrict txq,
- struct rte_mbuf **restrict pkts,
+mlx5_tx_burst_empw_inline(struct mlx5_txq_data *__rte_restrict txq,
+ struct rte_mbuf **__rte_restrict pkts,
unsigned int pkts_n,
- struct mlx5_txq_local *restrict loc,
+ struct mlx5_txq_local *__rte_restrict loc,
unsigned int olx)
{
/*
pkts += loc->pkts_sent + 1;
pkts_n -= loc->pkts_sent;
for (;;) {
- struct mlx5_wqe_dseg *restrict dseg;
- struct mlx5_wqe_eseg *restrict eseg;
+ struct mlx5_wqe_dseg *__rte_restrict dseg;
+ struct mlx5_wqe *__rte_restrict wqem;
enum mlx5_txcmp_code ret;
unsigned int room, part, nlim;
unsigned int slen = 0;
MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
+ if (MLX5_TXOFF_CONFIG(TXPP)) {
+ enum mlx5_txcmp_code wret;
+
+ /* Generate WAIT for scheduling if requested. */
+ wret = mlx5_tx_schedule_send(txq, loc, olx);
+ if (wret == MLX5_TXCMP_CODE_EXIT)
+ return MLX5_TXCMP_CODE_EXIT;
+ if (wret == MLX5_TXCMP_CODE_ERROR)
+ return MLX5_TXCMP_CODE_ERROR;
+ }
/*
* Limits the amount of packets in one WQE
* to improve CQE latency generation.
return MLX5_TXCMP_CODE_EXIT;
if (likely(pkts_n > 1))
rte_prefetch0(*pkts);
- loc->wqe_last = txq->wqes + (txq->wqe_ci & txq->wqe_m);
+ wqem = txq->wqes + (txq->wqe_ci & txq->wqe_m);
/*
* Build eMPW title WQEBB:
* - Control Segment, eMPW opcode, zero DS
* - Ethernet Segment, no inline
*/
- mlx5_tx_cseg_init(txq, loc, loc->wqe_last, 0,
+ mlx5_tx_cseg_init(txq, loc, wqem, 0,
MLX5_OPCODE_ENHANCED_MPSW, olx);
- mlx5_tx_eseg_none(txq, loc, loc->wqe_last,
+ mlx5_tx_eseg_none(txq, loc, wqem,
olx & ~MLX5_TXOFF_CONFIG_VLAN);
- eseg = &loc->wqe_last->eseg;
- dseg = &loc->wqe_last->dseg[0];
+ dseg = &wqem->dseg[0];
/* Store the packet length for legacy MPW. */
if (MLX5_TXOFF_CONFIG(MPW))
- eseg->mss = rte_cpu_to_be_16
- (rte_pktmbuf_data_len(loc->mbuf));
+ wqem->eseg.mss = rte_cpu_to_be_16
+ (rte_pktmbuf_data_len(loc->mbuf));
room = RTE_MIN(MLX5_WQE_SIZE_MAX / MLX5_WQE_SIZE,
loc->wqe_free) * MLX5_WQE_SIZE -
MLX5_WQE_CSEG_SIZE -
MLX5_WQE_ESEG_SIZE;
+ /* Limit the room for legacy MPW sessions for performance. */
+ if (MLX5_TXOFF_CONFIG(MPW))
+ room = RTE_MIN(room,
+ RTE_MAX(txq->inlen_empw +
+ sizeof(dseg->bcount) +
+ (MLX5_TXOFF_CONFIG(VLAN) ?
+ sizeof(struct rte_vlan_hdr) : 0),
+ MLX5_MPW_INLINE_MAX_PACKETS *
+ MLX5_WQE_DSEG_SIZE));
/* Build WQE till we have space, packets and resources. */
part = room;
for (;;) {
* We have some successfully built
* packet Data Segments to send.
*/
- mlx5_tx_idone_empw(txq, loc, part, slen, olx);
+ mlx5_tx_idone_empw(txq, loc, part,
+ slen, wqem, olx);
return MLX5_TXCMP_CODE_ERROR;
}
/* Inline or not inline - that's the Question. */
if (dlen > txq->inlen_empw ||
loc->mbuf->ol_flags & PKT_TX_DYNF_NOINLINE)
goto pointer_empw;
+ if (MLX5_TXOFF_CONFIG(MPW)) {
+ if (dlen > txq->inlen_send)
+ goto pointer_empw;
+ tlen = dlen;
+ if (part == room) {
+ /* Open new inline MPW session. */
+ tlen += sizeof(dseg->bcount);
+ dseg->bcount = RTE_BE32(0);
+ dseg = RTE_PTR_ADD
+ (dseg, sizeof(dseg->bcount));
+ } else {
+ /*
+ * No pointer and inline descriptor
+ * intermix for legacy MPW sessions.
+ */
+ if (wqem->dseg[0].bcount)
+ break;
+ }
+ } else {
+ tlen = sizeof(dseg->bcount) + dlen;
+ }
/* Inline entire packet, optional VLAN insertion. */
- tlen = sizeof(dseg->bcount) + dlen;
if (MLX5_TXOFF_CONFIG(VLAN) &&
loc->mbuf->ol_flags & PKT_TX_VLAN_PKT) {
/*
dseg = mlx5_tx_dseg_empw(txq, loc, dseg,
dptr, dlen, olx);
}
- tlen = RTE_ALIGN(tlen, MLX5_WSEG_SIZE);
+ if (!MLX5_TXOFF_CONFIG(MPW))
+ tlen = RTE_ALIGN(tlen, MLX5_WSEG_SIZE);
MLX5_ASSERT(room >= tlen);
room -= tlen;
/*
rte_pktmbuf_free_seg(loc->mbuf);
goto next_mbuf;
pointer_empw:
+ /*
+ * No pointer and inline descriptor
+ * intermix for legacy MPW sessions.
+ */
+ if (MLX5_TXOFF_CONFIG(MPW) &&
+ part != room &&
+ wqem->dseg[0].bcount == RTE_BE32(0))
+ break;
/*
* Not inlinable VLAN packets are
* proceeded outside of this routine.
* continue build descriptors.
*/
part -= room;
- mlx5_tx_idone_empw(txq, loc, part, slen, olx);
+ mlx5_tx_idone_empw(txq, loc, part,
+ slen, wqem, olx);
return MLX5_TXCMP_CODE_EXIT;
}
loc->mbuf = *pkts++;
*/
if (ret == MLX5_TXCMP_CODE_MULTI) {
part -= room;
- mlx5_tx_idone_empw(txq, loc, part, slen, olx);
+ mlx5_tx_idone_empw(txq, loc, part,
+ slen, wqem, olx);
if (unlikely(!loc->elts_free ||
!loc->wqe_free))
return MLX5_TXCMP_CODE_EXIT;
MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
if (ret == MLX5_TXCMP_CODE_TSO) {
part -= room;
- mlx5_tx_idone_empw(txq, loc, part, slen, olx);
+ mlx5_tx_idone_empw(txq, loc, part,
+ slen, wqem, olx);
if (unlikely(!loc->elts_free ||
!loc->wqe_free))
return MLX5_TXCMP_CODE_EXIT;
}
if (ret == MLX5_TXCMP_CODE_SINGLE) {
part -= room;
- mlx5_tx_idone_empw(txq, loc, part, slen, olx);
+ mlx5_tx_idone_empw(txq, loc, part,
+ slen, wqem, olx);
if (unlikely(!loc->elts_free ||
!loc->wqe_free))
return MLX5_TXCMP_CODE_EXIT;
if (ret != MLX5_TXCMP_CODE_EMPW) {
MLX5_ASSERT(false);
part -= room;
- mlx5_tx_idone_empw(txq, loc, part, slen, olx);
+ mlx5_tx_idone_empw(txq, loc, part,
+ slen, wqem, olx);
return MLX5_TXCMP_CODE_ERROR;
}
/* Check if we have minimal room left. */
* - metadata value
* - software parser settings
* - packets length (legacy MPW only)
+ * - scheduling is not required
*/
- if (!mlx5_tx_match_empw(txq, eseg, loc, dlen, olx))
+ if (!mlx5_tx_match_empw(txq, &wqem->eseg,
+ loc, dlen, olx))
break;
/* Packet attributes match, continue the same eMPW. */
if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
part -= room;
if (unlikely(!part))
return MLX5_TXCMP_CODE_EXIT;
- mlx5_tx_idone_empw(txq, loc, part, slen, olx);
+ mlx5_tx_idone_empw(txq, loc, part, slen, wqem, olx);
if (unlikely(!loc->elts_free ||
!loc->wqe_free))
return MLX5_TXCMP_CODE_EXIT;
* Data inlining and VLAN insertion are supported.
*/
static __rte_always_inline enum mlx5_txcmp_code
-mlx5_tx_burst_single_send(struct mlx5_txq_data *restrict txq,
- struct rte_mbuf **restrict pkts,
+mlx5_tx_burst_single_send(struct mlx5_txq_data *__rte_restrict txq,
+ struct rte_mbuf **__rte_restrict pkts,
unsigned int pkts_n,
- struct mlx5_txq_local *restrict loc,
+ struct mlx5_txq_local *__rte_restrict loc,
unsigned int olx)
{
/*
pkts += loc->pkts_sent + 1;
pkts_n -= loc->pkts_sent;
for (;;) {
- struct mlx5_wqe *restrict wqe;
+ struct mlx5_wqe *__rte_restrict wqe;
enum mlx5_txcmp_code ret;
MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
+ if (MLX5_TXOFF_CONFIG(TXPP)) {
+ enum mlx5_txcmp_code wret;
+
+ /* Generate WAIT for scheduling if requested. */
+ wret = mlx5_tx_schedule_send(txq, loc, olx);
+ if (wret == MLX5_TXCMP_CODE_EXIT)
+ return MLX5_TXCMP_CODE_EXIT;
+ if (wret == MLX5_TXCMP_CODE_ERROR)
+ return MLX5_TXCMP_CODE_ERROR;
+ }
if (MLX5_TXOFF_CONFIG(INLINE)) {
unsigned int inlen, vlan = 0;
txq->inlen_mode) ||
(MLX5_TXOFF_CONFIG(MPW) &&
txq->inlen_mode)) {
+ if (inlen <= txq->inlen_send)
+ goto single_inline;
/*
* The hardware requires the
* minimal inline data header.
}
goto single_no_inline;
}
+single_inline:
/*
* Completely inlined packet data WQE:
* - Control Segment, SEND opcode
* not contain inlined data for eMPW due to
* segment shared for all packets.
*/
- struct mlx5_wqe_dseg *restrict dseg;
+ struct mlx5_wqe_dseg *__rte_restrict dseg;
unsigned int ds;
uint8_t *dptr;
}
static __rte_always_inline enum mlx5_txcmp_code
-mlx5_tx_burst_single(struct mlx5_txq_data *restrict txq,
- struct rte_mbuf **restrict pkts,
+mlx5_tx_burst_single(struct mlx5_txq_data *__rte_restrict txq,
+ struct rte_mbuf **__rte_restrict pkts,
unsigned int pkts_n,
- struct mlx5_txq_local *restrict loc,
+ struct mlx5_txq_local *__rte_restrict loc,
unsigned int olx)
{
enum mlx5_txcmp_code ret;
* Number of packets successfully transmitted (<= pkts_n).
*/
static __rte_always_inline uint16_t
-mlx5_tx_burst_tmpl(struct mlx5_txq_data *restrict txq,
- struct rte_mbuf **restrict pkts,
+mlx5_tx_burst_tmpl(struct mlx5_txq_data *__rte_restrict txq,
+ struct rte_mbuf **__rte_restrict pkts,
uint16_t pkts_n,
unsigned int olx)
{
/*
* Calculate the number of available resources - elts and WQEs.
* There are two possible different scenarios:
- * - no data inlining into WQEs, one WQEBB may contains upto
+ * - no data inlining into WQEs, one WQEBB may contains up to
* four packets, in this case elts become scarce resource
* - data inlining into WQEs, one packet may require multiple
* WQEBBs, the WQEs become the limiting factor.
MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
MLX5_TXOFF_CONFIG_METADATA)
+/* Generate routines with timestamp scheduling. */
+MLX5_TXOFF_DECL(full_ts_nompw,
+ MLX5_TXOFF_CONFIG_FULL | MLX5_TXOFF_CONFIG_TXPP)
+
+MLX5_TXOFF_DECL(full_ts_nompwi,
+ MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
+ MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
+ MLX5_TXOFF_CONFIG_VLAN | MLX5_TXOFF_CONFIG_METADATA |
+ MLX5_TXOFF_CONFIG_TXPP)
+
+MLX5_TXOFF_DECL(full_ts,
+ MLX5_TXOFF_CONFIG_FULL | MLX5_TXOFF_CONFIG_TXPP |
+ MLX5_TXOFF_CONFIG_EMPW)
+
+MLX5_TXOFF_DECL(full_ts_noi,
+ MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
+ MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
+ MLX5_TXOFF_CONFIG_VLAN | MLX5_TXOFF_CONFIG_METADATA |
+ MLX5_TXOFF_CONFIG_TXPP | MLX5_TXOFF_CONFIG_EMPW)
+
+MLX5_TXOFF_DECL(none_ts,
+ MLX5_TXOFF_CONFIG_NONE | MLX5_TXOFF_CONFIG_TXPP |
+ MLX5_TXOFF_CONFIG_EMPW)
+
+MLX5_TXOFF_DECL(mdi_ts,
+ MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_METADATA |
+ MLX5_TXOFF_CONFIG_TXPP | MLX5_TXOFF_CONFIG_EMPW)
+
+MLX5_TXOFF_DECL(mti_ts,
+ MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
+ MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_METADATA |
+ MLX5_TXOFF_CONFIG_TXPP | MLX5_TXOFF_CONFIG_EMPW)
+
+MLX5_TXOFF_DECL(mtiv_ts,
+ MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
+ MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
+ MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_TXPP |
+ MLX5_TXOFF_CONFIG_EMPW)
+
/*
* Generate routines with Legacy Multi-Packet Write support.
- * This mode is supported by ConnectX-4LX only and imposes
+ * This mode is supported by ConnectX-4 Lx only and imposes
* offload limitations, not supported:
* - ACL/Flows (metadata are becoming meaningless)
* - WQE Inline headers
MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
+MLX5_TXOFF_INFO(full_ts_nompw,
+ MLX5_TXOFF_CONFIG_FULL | MLX5_TXOFF_CONFIG_TXPP)
+
+MLX5_TXOFF_INFO(full_ts_nompwi,
+ MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
+ MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
+ MLX5_TXOFF_CONFIG_VLAN | MLX5_TXOFF_CONFIG_METADATA |
+ MLX5_TXOFF_CONFIG_TXPP)
+
+MLX5_TXOFF_INFO(full_ts,
+ MLX5_TXOFF_CONFIG_FULL | MLX5_TXOFF_CONFIG_TXPP |
+ MLX5_TXOFF_CONFIG_EMPW)
+
+MLX5_TXOFF_INFO(full_ts_noi,
+ MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
+ MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
+ MLX5_TXOFF_CONFIG_VLAN | MLX5_TXOFF_CONFIG_METADATA |
+ MLX5_TXOFF_CONFIG_TXPP | MLX5_TXOFF_CONFIG_EMPW)
+
+MLX5_TXOFF_INFO(none_ts,
+ MLX5_TXOFF_CONFIG_NONE | MLX5_TXOFF_CONFIG_TXPP |
+ MLX5_TXOFF_CONFIG_EMPW)
+
+MLX5_TXOFF_INFO(mdi_ts,
+ MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_METADATA |
+ MLX5_TXOFF_CONFIG_TXPP | MLX5_TXOFF_CONFIG_EMPW)
+
+MLX5_TXOFF_INFO(mti_ts,
+ MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
+ MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_METADATA |
+ MLX5_TXOFF_CONFIG_TXPP | MLX5_TXOFF_CONFIG_EMPW)
+
+MLX5_TXOFF_INFO(mtiv_ts,
+ MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
+ MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
+ MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_TXPP |
+ MLX5_TXOFF_CONFIG_EMPW)
+
MLX5_TXOFF_INFO(full,
MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
/* We should support VLAN insertion. */
olx |= MLX5_TXOFF_CONFIG_VLAN;
}
+ if (tx_offloads & DEV_TX_OFFLOAD_SEND_ON_TIMESTAMP &&
+ rte_mbuf_dynflag_lookup
+ (RTE_MBUF_DYNFLAG_TX_TIMESTAMP_NAME, NULL) > 0 &&
+ rte_mbuf_dynfield_lookup
+ (RTE_MBUF_DYNFIELD_TIMESTAMP_NAME, NULL) > 0) {
+ /* Offload configured, dynamic entities registered. */
+ olx |= MLX5_TXOFF_CONFIG_TXPP;
+ }
if (priv->txqs_n && (*priv->txqs)[0]) {
struct mlx5_txq_data *txd = (*priv->txqs)[0];
/* Does not meet requested offloads at all. */
continue;
}
+ if ((olx ^ tmp) & MLX5_TXOFF_CONFIG_MPW)
+ /* Do not enable legacy MPW if not configured. */
+ continue;
if ((olx ^ tmp) & MLX5_TXOFF_CONFIG_EMPW)
/* Do not enable eMPW if not configured. */
continue;
if ((olx ^ tmp) & MLX5_TXOFF_CONFIG_INLINE)
/* Do not enable inlining if not configured. */
continue;
+ if ((olx ^ tmp) & MLX5_TXOFF_CONFIG_TXPP)
+ /* Do not enable scheduling if not configured. */
+ continue;
/*
* Some routine meets the requirements.
* Check whether it has minimal amount
DRV_LOG(DEBUG, "\tVLANI (VLAN insertion)");
if (txoff_func[m].olx & MLX5_TXOFF_CONFIG_METADATA)
DRV_LOG(DEBUG, "\tMETAD (tx Flow metadata)");
+ if (txoff_func[m].olx & MLX5_TXOFF_CONFIG_TXPP)
+ DRV_LOG(DEBUG, "\tMETAD (tx Scheduling)");
if (txoff_func[m].olx & MLX5_TXOFF_CONFIG_EMPW) {
if (txoff_func[m].olx & MLX5_TXOFF_CONFIG_MPW)
DRV_LOG(DEBUG, "\tMPW (Legacy MPW)");
}
return txoff_func[m].func;
}
+
+/**
+ * DPDK callback to get the TX queue information
+ *
+ * @param dev
+ * Pointer to the device structure.
+ *
+ * @param tx_queue_id
+ * Tx queue identificator.
+ *
+ * @param qinfo
+ * Pointer to the TX queue information structure.
+ *
+ * @return
+ * None.
+ */
+
+void
+mlx5_txq_info_get(struct rte_eth_dev *dev, uint16_t tx_queue_id,
+ struct rte_eth_txq_info *qinfo)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_txq_data *txq = (*priv->txqs)[tx_queue_id];
+ struct mlx5_txq_ctrl *txq_ctrl =
+ container_of(txq, struct mlx5_txq_ctrl, txq);
+
+ if (!txq)
+ return;
+ qinfo->nb_desc = txq->elts_s;
+ qinfo->conf.tx_thresh.pthresh = 0;
+ qinfo->conf.tx_thresh.hthresh = 0;
+ qinfo->conf.tx_thresh.wthresh = 0;
+ qinfo->conf.tx_rs_thresh = 0;
+ qinfo->conf.tx_free_thresh = 0;
+ qinfo->conf.tx_deferred_start = txq_ctrl ? 0 : 1;
+ qinfo->conf.offloads = dev->data->dev_conf.txmode.offloads;
+}
+
+/**
+ * DPDK callback to get the TX packet burst mode information
+ *
+ * @param dev
+ * Pointer to the device structure.
+ *
+ * @param tx_queue_id
+ * Tx queue identificatior.
+ *
+ * @param mode
+ * Pointer to the burts mode information.
+ *
+ * @return
+ * 0 as success, -EINVAL as failure.
+ */
+
+int
+mlx5_tx_burst_mode_get(struct rte_eth_dev *dev,
+ uint16_t tx_queue_id __rte_unused,
+ struct rte_eth_burst_mode *mode)
+{
+ eth_tx_burst_t pkt_burst = dev->tx_pkt_burst;
+ unsigned int i, olx;
+
+ for (i = 0; i < RTE_DIM(txoff_func); i++) {
+ if (pkt_burst == txoff_func[i].func) {
+ olx = txoff_func[i].olx;
+ snprintf(mode->info, sizeof(mode->info),
+ "%s%s%s%s%s%s%s%s%s",
+ (olx & MLX5_TXOFF_CONFIG_EMPW) ?
+ ((olx & MLX5_TXOFF_CONFIG_MPW) ?
+ "Legacy MPW" : "Enhanced MPW") : "No MPW",
+ (olx & MLX5_TXOFF_CONFIG_MULTI) ?
+ " + MULTI" : "",
+ (olx & MLX5_TXOFF_CONFIG_TSO) ?
+ " + TSO" : "",
+ (olx & MLX5_TXOFF_CONFIG_SWP) ?
+ " + SWP" : "",
+ (olx & MLX5_TXOFF_CONFIG_CSUM) ?
+ " + CSUM" : "",
+ (olx & MLX5_TXOFF_CONFIG_INLINE) ?
+ " + INLINE" : "",
+ (olx & MLX5_TXOFF_CONFIG_VLAN) ?
+ " + VLAN" : "",
+ (olx & MLX5_TXOFF_CONFIG_METADATA) ?
+ " + METADATA" : "",
+ (olx & MLX5_TXOFF_CONFIG_TXPP) ?
+ " + TXPP" : "");
+ return 0;
+ }
+ }
+ return -EINVAL;
+}