#include <stdint.h>
-#ifdef __FreeBSD__
-#include <sys/types.h>
-#include <machine/cpufunc.h>
-#else
-#include <sys/io.h>
-#endif
-
+#include <rte_pci.h>
+#include <rte_bus_pci.h>
#include <rte_ethdev.h>
struct virtqueue;
+struct virtnet_ctl;
/* VirtIO PCI vendor/device ID. */
#define VIRTIO_PCI_VENDORID 0x1AF4
-#define VIRTIO_PCI_DEVICEID_MIN 0x1000
-#define VIRTIO_PCI_DEVICEID_MAX 0x103F
+#define VIRTIO_PCI_LEGACY_DEVICEID_NET 0x1000
+#define VIRTIO_PCI_MODERN_DEVICEID_NET 0x1041
/* VirtIO ABI version, this must match exactly. */
#define VIRTIO_PCI_ABI_VERSION 0
/* The feature bitmap for virtio net */
#define VIRTIO_NET_F_CSUM 0 /* Host handles pkts w/ partial csum */
#define VIRTIO_NET_F_GUEST_CSUM 1 /* Guest handles pkts w/ partial csum */
+#define VIRTIO_NET_F_MTU 3 /* Initial MTU advice. */
#define VIRTIO_NET_F_MAC 5 /* Host has given MAC address. */
#define VIRTIO_NET_F_GUEST_TSO4 7 /* Guest can handle TSOv4 in. */
#define VIRTIO_NET_F_GUEST_TSO6 8 /* Guest can handle TSOv6 in. */
#define VIRTIO_RING_F_INDIRECT_DESC 28
#define VIRTIO_F_VERSION_1 32
+#define VIRTIO_F_IOMMU_PLATFORM 33
/*
* Some VirtIO feature bits (currently bits 28 through 31) are
* rest are per-device feature bits.
*/
#define VIRTIO_TRANSPORT_F_START 28
-#define VIRTIO_TRANSPORT_F_END 32
+#define VIRTIO_TRANSPORT_F_END 34
/* The Guest publishes the used index for which it expects an interrupt
* at the end of the avail ring. Host should ignore the avail->flags field. */
/*
* Maximum number of virtqueues per device.
*/
-#define VIRTIO_MAX_VIRTQUEUES 8
+#define VIRTIO_MAX_VIRTQUEUE_PAIRS 8
+#define VIRTIO_MAX_VIRTQUEUES (VIRTIO_MAX_VIRTQUEUE_PAIRS * 2 + 1)
/* Common configuration */
#define VIRTIO_PCI_CAP_COMMON_CFG 1
uint16_t (*set_config_irq)(struct virtio_hw *hw, uint16_t vec);
+ uint16_t (*set_queue_irq)(struct virtio_hw *hw, struct virtqueue *vq,
+ uint16_t vec);
+
uint16_t (*get_queue_num)(struct virtio_hw *hw, uint16_t queue_id);
- void (*setup_queue)(struct virtio_hw *hw, struct virtqueue *vq);
+ int (*setup_queue)(struct virtio_hw *hw, struct virtqueue *vq);
void (*del_queue)(struct virtio_hw *hw, struct virtqueue *vq);
void (*notify_queue)(struct virtio_hw *hw, struct virtqueue *vq);
};
struct virtio_net_config;
struct virtio_hw {
- struct virtqueue *cvq;
- uint32_t io_base;
+ struct virtnet_ctl *cvq;
+ uint64_t req_guest_features;
uint64_t guest_features;
- uint32_t max_tx_queues;
- uint32_t max_rx_queues;
+ uint32_t max_queue_pairs;
+ uint16_t started;
+ uint16_t max_mtu;
uint16_t vtnet_hdr_size;
uint8_t vlan_strip;
uint8_t use_msix;
- uint8_t started;
uint8_t modern;
+ uint8_t use_simple_rx;
+ uint8_t use_simple_tx;
+ uint16_t port_id;
uint8_t mac_addr[ETHER_ADDR_LEN];
uint32_t notify_off_multiplier;
uint8_t *isr;
uint16_t *notify_base;
- struct rte_pci_device *dev;
struct virtio_pci_common_cfg *common_cfg;
struct virtio_net_config *dev_cfg;
+ void *virtio_user_dev;
+
+ struct virtqueue **vqs;
+};
+
+
+/*
+ * While virtio_hw is stored in shared memory, this structure stores
+ * some infos that may vary in the multiple process model locally.
+ * For example, the vtpci_ops pointer.
+ */
+struct virtio_hw_internal {
const struct virtio_pci_ops *vtpci_ops;
+ struct rte_pci_ioport io;
};
+#define VTPCI_OPS(hw) (virtio_hw_internal[(hw)->port_id].vtpci_ops)
+#define VTPCI_IO(hw) (&virtio_hw_internal[(hw)->port_id].io)
+
+extern struct virtio_hw_internal virtio_hw_internal[RTE_MAX_ETHPORTS];
+
+
/*
* This structure is just a reference to read
* net device specific config space; it just a chodu structure
/* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
uint16_t status;
uint16_t max_virtqueue_pairs;
+ uint16_t mtu;
} __attribute__((packed));
-/*
- * The remaining space is defined by each driver as the per-driver
- * configuration space.
- */
-#define VIRTIO_PCI_CONFIG(hw) (((hw)->use_msix) ? 24 : 20)
-
/*
* How many bits to shift physical queue address written to QUEUE_PFN.
* 12 is historical, and due to x86 page size.
/* The alignment to use between consumer and producer parts of vring. */
#define VIRTIO_PCI_VRING_ALIGN 4096
-#ifdef __FreeBSD__
-
-static inline void
-outb_p(unsigned char data, unsigned int port)
-{
-
- outb(port, (u_char)data);
-}
-
-static inline void
-outw_p(unsigned short data, unsigned int port)
-{
- outw(port, (u_short)data);
-}
-
-static inline void
-outl_p(unsigned int data, unsigned int port)
-{
- outl(port, (u_int)data);
-}
-#endif
-
-#define VIRTIO_PCI_REG_ADDR(hw, reg) \
- (unsigned short)((hw)->io_base + (reg))
-
-#define VIRTIO_READ_REG_1(hw, reg) \
- inb((VIRTIO_PCI_REG_ADDR((hw), (reg))))
-#define VIRTIO_WRITE_REG_1(hw, reg, value) \
- outb_p((unsigned char)(value), (VIRTIO_PCI_REG_ADDR((hw), (reg))))
-
-#define VIRTIO_READ_REG_2(hw, reg) \
- inw((VIRTIO_PCI_REG_ADDR((hw), (reg))))
-#define VIRTIO_WRITE_REG_2(hw, reg, value) \
- outw_p((unsigned short)(value), (VIRTIO_PCI_REG_ADDR((hw), (reg))))
-
-#define VIRTIO_READ_REG_4(hw, reg) \
- inl((VIRTIO_PCI_REG_ADDR((hw), (reg))))
-#define VIRTIO_WRITE_REG_4(hw, reg, value) \
- outl_p((unsigned int)(value), (VIRTIO_PCI_REG_ADDR((hw), (reg))))
+enum virtio_msix_status {
+ VIRTIO_MSIX_NONE = 0,
+ VIRTIO_MSIX_DISABLED = 1,
+ VIRTIO_MSIX_ENABLED = 2
+};
static inline int
vtpci_with_feature(struct virtio_hw *hw, uint64_t bit)
/*
* Function declaration from virtio_pci.c
*/
-int vtpci_init(struct rte_pci_device *, struct virtio_hw *);
+int vtpci_init(struct rte_pci_device *dev, struct virtio_hw *hw);
void vtpci_reset(struct virtio_hw *);
void vtpci_reinit_complete(struct virtio_hw *);
uint8_t vtpci_isr(struct virtio_hw *);
-uint16_t vtpci_irq_config(struct virtio_hw *, uint16_t);
+enum virtio_msix_status vtpci_msix_detect(struct rte_pci_device *dev);
+
+extern const struct virtio_pci_ops legacy_ops;
+extern const struct virtio_pci_ops modern_ops;
+extern const struct virtio_pci_ops virtio_user_ops;
#endif /* _VIRTIO_PCI_H_ */