#define NB_MBUF (32000)
+#define CDEV_QUEUE_DESC 2048
#define CDEV_MAP_ENTRIES 1024
#define CDEV_MP_NB_OBJS 2048
#define CDEV_MP_CACHE_SZ 64
.hw_ip_checksum = 1, /**< IP checksum offload enabled */
.hw_vlan_filter = 0, /**< VLAN filtering disabled */
.jumbo_frame = 0, /**< Jumbo Frame Support disabled */
- .hw_strip_crc = 0, /**< CRC stripped by hardware */
+ .hw_strip_crc = 1, /**< CRC stripped by hardware */
},
.rx_adv_conf = {
.rss_conf = {
struct rte_mbuf *m;
uint32_t i, j, res, sa_idx;
- if (ip->num == 0)
+ if (ip->num == 0 || sp == NULL)
return;
rte_acl_classify((struct rte_acl_ctx *)sp, ip->data, ip->res,
struct rte_mbuf *m;
uint32_t i, j, sa_idx;
- if (ip->num == 0)
+ if (ip->num == 0 || sp == NULL)
return;
rte_acl_classify((struct rte_acl_ctx *)sp, ip->data, ip->res,
static inline void
route6_pkts(struct rt_ctx *rt_ctx, struct rte_mbuf *pkts[], uint8_t nb_pkts)
{
- int16_t hop[MAX_PKT_BURST * 2];
+ int32_t hop[MAX_PKT_BURST * 2];
uint8_t dst_ip[MAX_PKT_BURST * 2][16];
uint8_t *ip6_dst;
uint16_t i, offset;
qconf->inbound.sp6_ctx = socket_ctx[socket_id].sp_ip6_in;
qconf->inbound.sa_ctx = socket_ctx[socket_id].sa_in;
qconf->inbound.cdev_map = cdev_map_in;
+ qconf->inbound.session_pool = socket_ctx[socket_id].session_pool;
qconf->outbound.sp4_ctx = socket_ctx[socket_id].sp_ip4_out;
qconf->outbound.sp6_ctx = socket_ctx[socket_id].sp_ip6_out;
qconf->outbound.sa_ctx = socket_ctx[socket_id].sa_out;
qconf->outbound.cdev_map = cdev_map_out;
+ qconf->outbound.session_pool = socket_ctx[socket_id].session_pool;
if (qconf->nb_rx_queue == 0) {
RTE_LOG(INFO, IPSEC, "lcore %u has nothing to do\n", lcore_id);
argv[optind-1] = prgname;
ret = optind-1;
- optind = 0; /* reset getopt lib */
+ optind = 1; /* reset getopt lib */
return ret;
}
printf("lcore/cryptodev/qp mappings:\n");
+ uint32_t max_sess_sz = 0, sess_sz;
+ for (cdev_id = 0; cdev_id < rte_cryptodev_count(); cdev_id++) {
+ sess_sz = rte_cryptodev_get_private_session_size(cdev_id);
+ if (sess_sz > max_sess_sz)
+ max_sess_sz = sess_sz;
+ }
+
idx = 0;
/* Start from last cdev id to give HW priority */
for (cdev_id = rte_cryptodev_count() - 1; cdev_id >= 0; cdev_id--) {
dev_conf.socket_id = rte_cryptodev_socket_id(cdev_id);
dev_conf.nb_queue_pairs = qp;
- dev_conf.session_mp.nb_objs = CDEV_MP_NB_OBJS;
- dev_conf.session_mp.cache_size = CDEV_MP_CACHE_SZ;
+
+ if (!socket_ctx[dev_conf.socket_id].session_pool) {
+ char mp_name[RTE_MEMPOOL_NAMESIZE];
+ struct rte_mempool *sess_mp;
+
+ snprintf(mp_name, RTE_MEMPOOL_NAMESIZE,
+ "sess_mp_%u", dev_conf.socket_id);
+ sess_mp = rte_mempool_create(mp_name,
+ CDEV_MP_NB_OBJS,
+ max_sess_sz,
+ CDEV_MP_CACHE_SZ,
+ 0, NULL, NULL, NULL,
+ NULL, dev_conf.socket_id,
+ 0);
+ if (sess_mp == NULL)
+ rte_exit(EXIT_FAILURE,
+ "Cannot create session pool on socket %d\n",
+ dev_conf.socket_id);
+ else
+ printf("Allocated session pool on socket %d\n",
+ dev_conf.socket_id);
+ socket_ctx[dev_conf.socket_id].session_pool = sess_mp;
+ }
if (rte_cryptodev_configure(cdev_id, &dev_conf))
- rte_panic("Failed to initialize crypodev %u\n",
+ rte_panic("Failed to initialize cryptodev %u\n",
cdev_id);
- qp_conf.nb_descriptors = CDEV_MP_NB_OBJS;
+ qp_conf.nb_descriptors = CDEV_QUEUE_DESC;
for (qp = 0; qp < dev_conf.nb_queue_pairs; qp++)
if (rte_cryptodev_queue_pair_setup(cdev_id, qp,
- &qp_conf, dev_conf.socket_id))
+ &qp_conf, dev_conf.socket_id,
+ socket_ctx[dev_conf.socket_id].session_pool))
rte_panic("Failed to setup queue %u for "
"cdev_id %u\n", 0, cdev_id);
rte_exit(EXIT_FAILURE, "Cannot configure device: "
"err=%d, port=%d\n", ret, portid);
+ ret = rte_eth_dev_adjust_nb_rx_tx_desc(portid, &nb_rxd, &nb_txd);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Cannot adjust number of descriptors: "
+ "err=%d, port=%d\n", ret, portid);
+
/* init one TX queue per lcore */
tx_queueid = 0;
for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
nb_lcores = rte_lcore_count();
- /* Replicate each contex per socket */
+ /* Replicate each context per socket */
for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
if (rte_lcore_is_enabled(lcore_id) == 0)
continue;