-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2012 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2016 Intel Corporation
*/
#include <stdio.h>
#include <stdarg.h>
#include <errno.h>
#include <getopt.h>
+#include <signal.h>
+#include <stdbool.h>
#include <rte_common.h>
+#include <rte_vect.h>
#include <rte_byteorder.h>
#include <rte_log.h>
+#include <rte_malloc.h>
#include <rte_memory.h>
#include <rte_memcpy.h>
-#include <rte_memzone.h>
-#include <rte_tailq.h>
#include <rte_eal.h>
-#include <rte_per_lcore.h>
#include <rte_launch.h>
#include <rte_atomic.h>
#include <rte_cycles.h>
#include <rte_per_lcore.h>
#include <rte_branch_prediction.h>
#include <rte_interrupts.h>
-#include <rte_pci.h>
#include <rte_random.h>
#include <rte_debug.h>
#include <rte_ether.h>
-#include <rte_ethdev.h>
-#include <rte_ring.h>
#include <rte_mempool.h>
#include <rte_mbuf.h>
#include <rte_ip.h>
#include <rte_tcp.h>
#include <rte_udp.h>
#include <rte_string_fns.h>
+#include <rte_cpuflags.h>
-#include "main.h"
-
-#define APP_LOOKUP_EXACT_MATCH 0
-#define APP_LOOKUP_LPM 1
-#define DO_RFC_1812_CHECKS
-
-//#define APP_LOOKUP_METHOD APP_LOOKUP_EXACT_MATCH
-#ifndef APP_LOOKUP_METHOD
-#define APP_LOOKUP_METHOD APP_LOOKUP_LPM
-#endif
-
-#if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
-#include <rte_hash.h>
-#elif (APP_LOOKUP_METHOD == APP_LOOKUP_LPM)
-#include <rte_lpm.h>
-#else
-#error "APP_LOOKUP_METHOD set to incorrect value"
-#endif
+#include <cmdline_parse.h>
+#include <cmdline_parse_etheraddr.h>
-#define RTE_LOGTYPE_L3FWD RTE_LOGTYPE_USER1
+#include "l3fwd.h"
+#include "l3fwd_event.h"
-#define MAX_PORTS 32
+#define MAX_TX_QUEUE_PER_PORT RTE_MAX_ETHPORTS
+#define MAX_RX_QUEUE_PER_PORT 128
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
-#define NB_MBUF 8192
+#define MAX_LCORE_PARAMS 1024
-/*
- * RX and TX Prefetch, Host, and Write-back threshold values should be
- * carefully set for optimal performance. Consult the network
- * controller's datasheet and supporting DPDK documentation for guidance
- * on how these parameters should be set.
- */
-#define RX_PTHRESH 8 /**< Default values of RX prefetch threshold reg. */
-#define RX_HTHRESH 8 /**< Default values of RX host threshold reg. */
-#define RX_WTHRESH 4 /**< Default values of RX write-back threshold reg. */
+/* Static global variables used within this file. */
+static uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT;
+static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
-/*
- * These default values are optimized for use with the Intel(R) 82599 10 GbE
- * Controller and the DPDK ixgbe PMD. Consider using other values for other
- * network controllers and/or network drivers.
- */
-#define TX_PTHRESH 36 /**< Default values of TX prefetch threshold reg. */
-#define TX_HTHRESH 0 /**< Default values of TX host threshold reg. */
-#define TX_WTHRESH 0 /**< Default values of TX write-back threshold reg. */
+/**< Ports set in promiscuous mode off by default. */
+static int promiscuous_on;
-#define MAX_PKT_BURST 32
-#define BURST_TX_DRAIN 200000ULL /* around 100us at 2 Ghz */
+/* Select Longest-Prefix or Exact match. */
+static int l3fwd_lpm_on;
+static int l3fwd_em_on;
-#define NB_SOCKETS 8
+/* Global variables. */
-#define SOCKET0 0
+static int numa_on = 1; /**< NUMA is enabled by default. */
+static int parse_ptype; /**< Parse packet type using rx callback, and */
+ /**< disabled by default */
+static int per_port_pool; /**< Use separate buffer pools per port; disabled */
+ /**< by default */
-/* Configure how many packets ahead to prefetch, when reading packets */
-#define PREFETCH_OFFSET 3
-
-/*
- * Configurable number of RX/TX ring descriptors
- */
-#define RTE_TEST_RX_DESC_DEFAULT 128
-#define RTE_TEST_TX_DESC_DEFAULT 512
-static uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT;
-static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
+volatile bool force_quit;
/* ethernet addresses of ports */
-static struct ether_addr ports_eth_addr[MAX_PORTS];
+uint64_t dest_eth_addr[RTE_MAX_ETHPORTS];
+struct rte_ether_addr ports_eth_addr[RTE_MAX_ETHPORTS];
-/* mask of enabled ports */
-static uint32_t enabled_port_mask = 0;
-static int promiscuous_on = 0; /**< Ports set in promiscuous mode off by default. */
-static int numa_on = 1; /**< NUMA is enabled by default. */
+xmm_t val_eth[RTE_MAX_ETHPORTS];
-struct mbuf_table {
- uint16_t len;
- struct rte_mbuf *m_table[MAX_PKT_BURST];
-};
+/* mask of enabled ports */
+uint32_t enabled_port_mask;
-struct lcore_rx_queue {
- uint8_t port_id;
- uint8_t queue_id;
-} __rte_cache_aligned;
+/* Used only in exact match mode. */
+int ipv6; /**< ipv6 is false by default. */
+uint32_t hash_entry_number = HASH_ENTRY_NUMBER_DEFAULT;
-#define MAX_RX_QUEUE_PER_LCORE 16
-#define MAX_TX_QUEUE_PER_PORT MAX_PORTS
-#define MAX_RX_QUEUE_PER_PORT 128
+struct lcore_conf lcore_conf[RTE_MAX_LCORE];
-#define MAX_LCORE_PARAMS 1024
struct lcore_params {
- uint8_t port_id;
+ uint16_t port_id;
uint8_t queue_id;
uint8_t lcore_id;
} __rte_cache_aligned;
static struct rte_eth_conf port_conf = {
.rxmode = {
+ .mq_mode = ETH_MQ_RX_RSS,
+ .max_rx_pkt_len = RTE_ETHER_MAX_LEN,
.split_hdr_size = 0,
- .header_split = 0, /**< Header Split disabled */
- .hw_ip_checksum = 1, /**< IP checksum offload enabled */
- .hw_vlan_filter = 0, /**< VLAN filtering disabled */
- .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
- .hw_strip_crc = 0, /**< CRC stripped by hardware */
+ .offloads = DEV_RX_OFFLOAD_CHECKSUM,
},
.rx_adv_conf = {
.rss_conf = {
.rss_key = NULL,
- .rss_hf = ETH_RSS_IPV4,
+ .rss_hf = ETH_RSS_IP,
},
},
.txmode = {
+ .mq_mode = ETH_MQ_TX_NONE,
},
};
-static const struct rte_eth_rxconf rx_conf = {
- .rx_thresh = {
- .pthresh = RX_PTHRESH,
- .hthresh = RX_HTHRESH,
- .wthresh = RX_WTHRESH,
- },
-};
-
-static const struct rte_eth_txconf tx_conf = {
- .tx_thresh = {
- .pthresh = TX_PTHRESH,
- .hthresh = TX_HTHRESH,
- .wthresh = TX_WTHRESH,
- },
- .tx_free_thresh = 0, /* Use PMD default values */
- .tx_rs_thresh = 0, /* Use PMD default values */
-};
-
-static struct rte_mempool * pktmbuf_pool[NB_SOCKETS];
-
-
-#if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
-
-#ifdef RTE_MACHINE_CPUFLAG_SSE4_2
-#include <rte_hash_crc.h>
-#define DEFAULT_HASH_FUNC rte_hash_crc
-#else
-#include <rte_jhash.h>
-#define DEFAULT_HASH_FUNC rte_jhash
-#endif
-
-struct ipv4_5tuple {
- uint32_t ip_dst;
- uint32_t ip_src;
- uint16_t port_dst;
- uint16_t port_src;
- uint8_t proto;
-} __attribute__((__packed__));
-
-struct l3fwd_route {
- struct ipv4_5tuple key;
- uint8_t if_out;
-};
-
-static struct l3fwd_route l3fwd_route_array[] = {
- {{IPv4(100,10,0,1), IPv4(200,10,0,1), 101, 11, IPPROTO_TCP}, 0},
- {{IPv4(100,20,0,2), IPv4(200,20,0,2), 102, 12, IPPROTO_TCP}, 1},
- {{IPv4(100,30,0,3), IPv4(200,30,0,3), 103, 13, IPPROTO_TCP}, 2},
- {{IPv4(100,40,0,4), IPv4(200,40,0,4), 104, 14, IPPROTO_TCP}, 3},
-};
+static struct rte_mempool *pktmbuf_pool[RTE_MAX_ETHPORTS][NB_SOCKETS];
+static uint8_t lkp_per_socket[NB_SOCKETS];
-typedef struct rte_hash lookup_struct_t;
-static lookup_struct_t *l3fwd_lookup_struct[NB_SOCKETS];
-
-#define L3FWD_HASH_ENTRIES 1024
-struct rte_hash_parameters l3fwd_hash_params = {
- .name = "l3fwd_hash_0",
- .entries = L3FWD_HASH_ENTRIES,
- .bucket_entries = 4,
- .key_len = sizeof(struct ipv4_5tuple),
- .hash_func = rte_hash_crc,
- .hash_func_init_val = 0,
- .socket_id = SOCKET0,
+struct l3fwd_lkp_mode {
+ void (*setup)(int);
+ int (*check_ptype)(int);
+ rte_rx_callback_fn cb_parse_ptype;
+ int (*main_loop)(void *);
+ void* (*get_ipv4_lookup_struct)(int);
+ void* (*get_ipv6_lookup_struct)(int);
};
-#define L3FWD_NUM_ROUTES \
- (sizeof(l3fwd_route_array) / sizeof(l3fwd_route_array[0]))
+static struct l3fwd_lkp_mode l3fwd_lkp;
-static uint8_t l3fwd_out_if[L3FWD_HASH_ENTRIES] __rte_cache_aligned;
-#endif
-
-#if (APP_LOOKUP_METHOD == APP_LOOKUP_LPM)
-struct l3fwd_route {
- uint32_t ip;
- uint8_t depth;
- uint8_t if_out;
+static struct l3fwd_lkp_mode l3fwd_em_lkp = {
+ .setup = setup_hash,
+ .check_ptype = em_check_ptype,
+ .cb_parse_ptype = em_cb_parse_ptype,
+ .main_loop = em_main_loop,
+ .get_ipv4_lookup_struct = em_get_ipv4_l3fwd_lookup_struct,
+ .get_ipv6_lookup_struct = em_get_ipv6_l3fwd_lookup_struct,
};
-static struct l3fwd_route l3fwd_route_array[] = {
- {IPv4(1,1,1,0), 24, 0},
- {IPv4(2,1,1,0), 24, 1},
- {IPv4(3,1,1,0), 24, 2},
- {IPv4(4,1,1,0), 24, 3},
- {IPv4(5,1,1,0), 24, 4},
- {IPv4(6,1,1,0), 24, 5},
- {IPv4(7,1,1,0), 24, 6},
- {IPv4(8,1,1,0), 24, 7},
+static struct l3fwd_lkp_mode l3fwd_lpm_lkp = {
+ .setup = setup_lpm,
+ .check_ptype = lpm_check_ptype,
+ .cb_parse_ptype = lpm_cb_parse_ptype,
+ .main_loop = lpm_main_loop,
+ .get_ipv4_lookup_struct = lpm_get_ipv4_l3fwd_lookup_struct,
+ .get_ipv6_lookup_struct = lpm_get_ipv6_l3fwd_lookup_struct,
};
-#define L3FWD_NUM_ROUTES \
- (sizeof(l3fwd_route_array) / sizeof(l3fwd_route_array[0]))
-
-#define L3FWD_LPM_MAX_RULES 1024
-
-typedef struct rte_lpm lookup_struct_t;
-static lookup_struct_t *l3fwd_lookup_struct[NB_SOCKETS];
-#endif
-
-struct lcore_conf {
- uint16_t n_rx_queue;
- struct lcore_rx_queue rx_queue_list[MAX_RX_QUEUE_PER_LCORE];
- uint16_t tx_queue_id[MAX_PORTS];
- struct mbuf_table tx_mbufs[MAX_PORTS];
- lookup_struct_t * lookup_struct;
-} __rte_cache_aligned;
-
-static struct lcore_conf lcore_conf[RTE_MAX_LCORE];
-
-/* Send burst of packets on an output interface */
-static inline int
-send_burst(struct lcore_conf *qconf, uint16_t n, uint8_t port)
-{
- struct rte_mbuf **m_table;
- int ret;
- uint16_t queueid;
-
- queueid = qconf->tx_queue_id[port];
- m_table = (struct rte_mbuf **)qconf->tx_mbufs[port].m_table;
-
- ret = rte_eth_tx_burst(port, queueid, m_table, n);
- if (unlikely(ret < n)) {
- do {
- rte_pktmbuf_free(m_table[ret]);
- } while (++ret < n);
- }
-
- return 0;
-}
-
-/* Enqueue a single packet, and send burst if queue is filled */
-static inline int
-send_single_packet(struct rte_mbuf *m, uint8_t port)
-{
- uint32_t lcore_id;
- uint16_t len;
- struct lcore_conf *qconf;
-
- lcore_id = rte_lcore_id();
-
- qconf = &lcore_conf[lcore_id];
- len = qconf->tx_mbufs[port].len;
- qconf->tx_mbufs[port].m_table[len] = m;
- len++;
-
- /* enough pkts to be sent */
- if (unlikely(len == MAX_PKT_BURST)) {
- send_burst(qconf, MAX_PKT_BURST, port);
- len = 0;
- }
-
- qconf->tx_mbufs[port].len = len;
- return 0;
-}
-
-#ifdef DO_RFC_1812_CHECKS
-static inline int
-is_valid_ipv4_pkt(struct ipv4_hdr *pkt, uint32_t link_len)
-{
- /* From http://www.rfc-editor.org/rfc/rfc1812.txt section 5.2.2 */
- /*
- * 1. The packet length reported by the Link Layer must be large
- * enough to hold the minimum length legal IP datagram (20 bytes).
- */
- if (link_len < sizeof(struct ipv4_hdr))
- return -1;
-
- /* 2. The IP checksum must be correct. */
- /* this is checked in H/W */
-
- /*
- * 3. The IP version number must be 4. If the version number is not 4
- * then the packet may be another version of IP, such as IPng or
- * ST-II.
- */
- if (((pkt->version_ihl) >> 4) != 4)
- return -3;
- /*
- * 4. The IP header length field must be large enough to hold the
- * minimum length legal IP datagram (20 bytes = 5 words).
- */
- if ((pkt->version_ihl & 0xf) < 5)
- return -4;
-
- /*
- * 5. The IP total length field must be large enough to hold the IP
- * datagram header, whose length is specified in the IP header length
- * field.
- */
- if (rte_cpu_to_be_16(pkt->total_length) < sizeof(struct ipv4_hdr))
- return -5;
-
- return 0;
-}
-#endif
-
-#if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
+/*
+ * Setup lookup methods for forwarding.
+ * Currently exact-match and longest-prefix-match
+ * are supported ones.
+ */
static void
-print_key(struct ipv4_5tuple key)
-{
- printf("IP dst = %08x, IP src = %08x, port dst = %d, port src = %d, proto = %d\n",
- (unsigned)key.ip_dst, (unsigned)key.ip_src, key.port_dst, key.port_src, key.proto);
-}
-
-static inline uint8_t
-get_dst_port(struct ipv4_hdr *ipv4_hdr, uint8_t portid, lookup_struct_t * l3fwd_lookup_struct)
-{
- struct ipv4_5tuple key;
- struct tcp_hdr *tcp;
- struct udp_hdr *udp;
- int ret = 0;
-
- key.ip_dst = rte_be_to_cpu_32(ipv4_hdr->dst_addr);
- key.ip_src = rte_be_to_cpu_32(ipv4_hdr->src_addr);
- key.proto = ipv4_hdr->next_proto_id;
-
- switch (ipv4_hdr->next_proto_id) {
- case IPPROTO_TCP:
- tcp = (struct tcp_hdr *)((unsigned char *) ipv4_hdr +
- sizeof(struct ipv4_hdr));
- key.port_dst = rte_be_to_cpu_16(tcp->dst_port);
- key.port_src = rte_be_to_cpu_16(tcp->src_port);
- break;
-
- case IPPROTO_UDP:
- udp = (struct udp_hdr *)((unsigned char *) ipv4_hdr +
- sizeof(struct ipv4_hdr));
- key.port_dst = rte_be_to_cpu_16(udp->dst_port);
- key.port_src = rte_be_to_cpu_16(udp->src_port);
- break;
-
- default:
- key.port_dst = 0;
- key.port_src = 0;
- }
-
- /* Find destination port */
- ret = rte_hash_lookup(l3fwd_lookup_struct, (const void *)&key);
- return (uint8_t)((ret < 0)? portid : l3fwd_out_if[ret]);
-}
-#endif
-
-#if (APP_LOOKUP_METHOD == APP_LOOKUP_LPM)
-static inline uint8_t
-get_dst_port(struct ipv4_hdr *ipv4_hdr, uint8_t portid, lookup_struct_t * l3fwd_lookup_struct)
-{
- uint8_t next_hop;
-
- return (uint8_t) ((rte_lpm_lookup(l3fwd_lookup_struct,
- rte_be_to_cpu_32(ipv4_hdr->dst_addr), &next_hop) == 0)?
- next_hop : portid);
-}
-#endif
-
-static inline void
-l3fwd_simple_forward(struct rte_mbuf *m, uint8_t portid, lookup_struct_t * l3fwd_lookup_struct)
-{
- struct ether_hdr *eth_hdr;
- struct ipv4_hdr *ipv4_hdr;
- void *tmp;
- uint8_t dst_port;
-
- eth_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
-
- ipv4_hdr = (struct ipv4_hdr *)(rte_pktmbuf_mtod(m, unsigned char *) +
- sizeof(struct ether_hdr));
-
-#ifdef DO_RFC_1812_CHECKS
- /* Check to make sure the packet is valid (RFC1812) */
- if (is_valid_ipv4_pkt(ipv4_hdr, m->pkt.pkt_len) < 0) {
- rte_pktmbuf_free(m);
- return;
- }
-#endif
-
- dst_port = get_dst_port(ipv4_hdr, portid, l3fwd_lookup_struct);
- if (dst_port >= MAX_PORTS || (enabled_port_mask & 1 << dst_port) == 0)
- dst_port = portid;
-
- /* 00:09:c0:00:00:xx */
- tmp = ð_hdr->d_addr.addr_bytes[0];
- *((uint64_t *)tmp) = 0x000000c00900 + (dst_port << 24);
-
-#ifdef DO_RFC_1812_CHECKS
- /* Update time to live and header checksum */
- --(ipv4_hdr->time_to_live);
- ++(ipv4_hdr->hdr_checksum);
-#endif
-
- /* src addr */
- ether_addr_copy(&ports_eth_addr[dst_port], ð_hdr->s_addr);
-
- send_single_packet(m, dst_port);
-
-}
-
-/* main processing loop */
-static __attribute__((noreturn)) int
-main_loop(__attribute__((unused)) void *dummy)
+setup_l3fwd_lookup_tables(void)
{
- struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
- unsigned lcore_id;
- uint64_t prev_tsc = 0;
- uint64_t diff_tsc, cur_tsc;
- int i, j, nb_rx;
- uint8_t portid, queueid;
- struct lcore_conf *qconf;
-
- lcore_id = rte_lcore_id();
- qconf = &lcore_conf[lcore_id];
-
- if (qconf->n_rx_queue == 0) {
- RTE_LOG(INFO, L3FWD, "lcore %u has nothing to do\n", lcore_id);
- while(1);
- }
-
- RTE_LOG(INFO, L3FWD, "entering main loop on lcore %u\n", lcore_id);
-
- for (i = 0; i < qconf->n_rx_queue; i++) {
-
- portid = qconf->rx_queue_list[i].port_id;
- queueid = qconf->rx_queue_list[i].queue_id;
- RTE_LOG(INFO, L3FWD, " -- lcoreid=%u portid=%hhu rxqueueid=%hhu\n", lcore_id,
- portid, queueid);
- }
-
- while (1) {
-
- cur_tsc = rte_rdtsc();
-
- /*
- * TX burst queue drain
- */
- diff_tsc = cur_tsc - prev_tsc;
- if (unlikely(diff_tsc > BURST_TX_DRAIN)) {
-
- /*
- * This could be optimized (use queueid instead of
- * portid), but it is not called so often
- */
- for (portid = 0; portid < MAX_PORTS; portid++) {
- if (qconf->tx_mbufs[portid].len == 0)
- continue;
- send_burst(&lcore_conf[lcore_id],
- qconf->tx_mbufs[portid].len,
- portid);
- qconf->tx_mbufs[portid].len = 0;
- }
-
- prev_tsc = cur_tsc;
- }
-
- /*
- * Read packet from RX queues
- */
- for (i = 0; i < qconf->n_rx_queue; ++i) {
-
- portid = qconf->rx_queue_list[i].port_id;
- queueid = qconf->rx_queue_list[i].queue_id;
- nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst, MAX_PKT_BURST);
-
- /* Prefetch first packets */
- for (j = 0; j < PREFETCH_OFFSET && j < nb_rx; j++) {
- rte_prefetch0(rte_pktmbuf_mtod(
- pkts_burst[j], void *));
- }
-
- /* Prefetch and forward already prefetched packets */
- for (j = 0; j < (nb_rx - PREFETCH_OFFSET); j++) {
- rte_prefetch0(rte_pktmbuf_mtod(pkts_burst[
- j + PREFETCH_OFFSET], void *));
- l3fwd_simple_forward(pkts_burst[j], portid, qconf->lookup_struct);
- }
-
- /* Forward remaining prefetched packets */
- for (; j < nb_rx; j++) {
- l3fwd_simple_forward(pkts_burst[j], portid, qconf->lookup_struct);
- }
- }
- }
+ /* Setup HASH lookup functions. */
+ if (l3fwd_em_on)
+ l3fwd_lkp = l3fwd_em_lkp;
+ /* Setup LPM lookup functions. */
+ else
+ l3fwd_lkp = l3fwd_lpm_lkp;
}
static int
}
static int
-check_port_config(const unsigned nb_ports)
+check_port_config(void)
{
- unsigned portid;
+ uint16_t portid;
uint16_t i;
for (i = 0; i < nb_lcore_params; ++i) {
printf("port %u is not enabled in port mask\n", portid);
return -1;
}
- if (portid >= nb_ports) {
+ if (!rte_eth_dev_is_valid_port(portid)) {
printf("port %u is not present on the board\n", portid);
return -1;
}
}
static uint8_t
-get_port_n_rx_queues(const uint8_t port)
+get_port_n_rx_queues(const uint16_t port)
{
int queue = -1;
uint16_t i;
for (i = 0; i < nb_lcore_params; ++i) {
- if (lcore_params[i].port_id == port && lcore_params[i].queue_id > queue)
- queue = lcore_params[i].queue_id;
+ if (lcore_params[i].port_id == port) {
+ if (lcore_params[i].queue_id == queue+1)
+ queue = lcore_params[i].queue_id;
+ else
+ rte_exit(EXIT_FAILURE, "queue ids of the port %d must be"
+ " in sequence and must start with 0\n",
+ lcore_params[i].port_id);
+ }
}
return (uint8_t)(++queue);
}
static void
print_usage(const char *prgname)
{
- printf ("%s [EAL options] -- -p PORTMASK -P"
- " [--config (port,queue,lcore)[,(port,queue,lcore]]\n"
- " -p PORTMASK: hexadecimal bitmask of ports to configure\n"
- " --config (port,queue,lcore): rx queues configuration\n"
- " --no-numa: optional, disable numa awareness\n",
+ fprintf(stderr, "%s [EAL options] --"
+ " -p PORTMASK"
+ " [-P]"
+ " [-E]"
+ " [-L]"
+ " --config (port,queue,lcore)[,(port,queue,lcore)]"
+ " [--eth-dest=X,MM:MM:MM:MM:MM:MM]"
+ " [--enable-jumbo [--max-pkt-len PKTLEN]]"
+ " [--no-numa]"
+ " [--hash-entry-num]"
+ " [--ipv6]"
+ " [--parse-ptype]"
+ " [--per-port-pool]"
+ " [--mode]"
+ " [--eventq-sched]\n\n"
+
+ " -p PORTMASK: Hexadecimal bitmask of ports to configure\n"
+ " -P : Enable promiscuous mode\n"
+ " -E : Enable exact match\n"
+ " -L : Enable longest prefix match (default)\n"
+ " --config (port,queue,lcore): Rx queue configuration\n"
+ " --eth-dest=X,MM:MM:MM:MM:MM:MM: Ethernet destination for port X\n"
+ " --enable-jumbo: Enable jumbo frames\n"
+ " --max-pkt-len: Under the premise of enabling jumbo,\n"
+ " maximum packet length in decimal (64-9600)\n"
+ " --no-numa: Disable numa awareness\n"
+ " --hash-entry-num: Specify the hash entry number in hexadecimal to be setup\n"
+ " --ipv6: Set if running ipv6 packets\n"
+ " --parse-ptype: Set to use software to analyze packet type\n"
+ " --per-port-pool: Use separate buffer pool per port\n"
+ " --mode: Packet transfer mode for I/O, poll or eventdev\n"
+ " Default mode = poll\n"
+ " --eventq-sched: Event queue synchronization method\n"
+ " ordered, atomic or parallel.\n"
+ " Default: atomic\n"
+ " Valid only if --mode=eventdev\n"
+ " --event-eth-rxqs: Number of ethernet RX queues per device.\n"
+ " Default: 1\n"
+ " Valid only if --mode=eventdev\n\n",
prgname);
}
+static int
+parse_max_pkt_len(const char *pktlen)
+{
+ char *end = NULL;
+ unsigned long len;
+
+ /* parse decimal string */
+ len = strtoul(pktlen, &end, 10);
+ if ((pktlen[0] == '\0') || (end == NULL) || (*end != '\0'))
+ return -1;
+
+ if (len == 0)
+ return -1;
+
+ return len;
+}
+
static int
parse_portmask(const char *portmask)
{
return pm;
}
+static int
+parse_hash_entry_number(const char *hash_entry_num)
+{
+ char *end = NULL;
+ unsigned long hash_en;
+ /* parse hexadecimal string */
+ hash_en = strtoul(hash_entry_num, &end, 16);
+ if ((hash_entry_num[0] == '\0') || (end == NULL) || (*end != '\0'))
+ return -1;
+
+ if (hash_en == 0)
+ return -1;
+
+ return hash_en;
+}
+
static int
parse_config(const char *q_arg)
{
if(size >= sizeof(s))
return -1;
- rte_snprintf(s, sizeof(s), "%.*s", size, p);
+ snprintf(s, sizeof(s), "%.*s", size, p);
if (rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',') != _NUM_FLD)
return -1;
for (i = 0; i < _NUM_FLD; i++){
nb_lcore_params);
return -1;
}
- lcore_params_array[nb_lcore_params].port_id = (uint8_t)int_fld[FLD_PORT];
- lcore_params_array[nb_lcore_params].queue_id = (uint8_t)int_fld[FLD_QUEUE];
- lcore_params_array[nb_lcore_params].lcore_id = (uint8_t)int_fld[FLD_LCORE];
+ lcore_params_array[nb_lcore_params].port_id =
+ (uint8_t)int_fld[FLD_PORT];
+ lcore_params_array[nb_lcore_params].queue_id =
+ (uint8_t)int_fld[FLD_QUEUE];
+ lcore_params_array[nb_lcore_params].lcore_id =
+ (uint8_t)int_fld[FLD_LCORE];
++nb_lcore_params;
}
lcore_params = lcore_params_array;
return 0;
}
+static void
+parse_eth_dest(const char *optarg)
+{
+ uint16_t portid;
+ char *port_end;
+ uint8_t c, *dest, peer_addr[6];
+
+ errno = 0;
+ portid = strtoul(optarg, &port_end, 10);
+ if (errno != 0 || port_end == optarg || *port_end++ != ',')
+ rte_exit(EXIT_FAILURE,
+ "Invalid eth-dest: %s", optarg);
+ if (portid >= RTE_MAX_ETHPORTS)
+ rte_exit(EXIT_FAILURE,
+ "eth-dest: port %d >= RTE_MAX_ETHPORTS(%d)\n",
+ portid, RTE_MAX_ETHPORTS);
+
+ if (cmdline_parse_etheraddr(NULL, port_end,
+ &peer_addr, sizeof(peer_addr)) < 0)
+ rte_exit(EXIT_FAILURE,
+ "Invalid ethernet address: %s\n",
+ port_end);
+ dest = (uint8_t *)&dest_eth_addr[portid];
+ for (c = 0; c < 6; c++)
+ dest[c] = peer_addr[c];
+ *(uint64_t *)(val_eth + portid) = dest_eth_addr[portid];
+}
+
+static void
+parse_mode(const char *optarg)
+{
+ struct l3fwd_event_resources *evt_rsrc = l3fwd_get_eventdev_rsrc();
+
+ if (!strcmp(optarg, "poll"))
+ evt_rsrc->enabled = false;
+ else if (!strcmp(optarg, "eventdev"))
+ evt_rsrc->enabled = true;
+}
+
+static void
+parse_eventq_sched(const char *optarg)
+{
+ struct l3fwd_event_resources *evt_rsrc = l3fwd_get_eventdev_rsrc();
+
+ if (!strcmp(optarg, "ordered"))
+ evt_rsrc->sched_type = RTE_SCHED_TYPE_ORDERED;
+ if (!strcmp(optarg, "atomic"))
+ evt_rsrc->sched_type = RTE_SCHED_TYPE_ATOMIC;
+ if (!strcmp(optarg, "parallel"))
+ evt_rsrc->sched_type = RTE_SCHED_TYPE_PARALLEL;
+}
+
+static void
+parse_event_eth_rx_queues(const char *eth_rx_queues)
+{
+ struct l3fwd_event_resources *evt_rsrc = l3fwd_get_eventdev_rsrc();
+ char *end = NULL;
+ uint8_t num_eth_rx_queues;
+
+ /* parse decimal string */
+ num_eth_rx_queues = strtoul(eth_rx_queues, &end, 10);
+ if ((eth_rx_queues[0] == '\0') || (end == NULL) || (*end != '\0'))
+ return;
+
+ if (num_eth_rx_queues == 0)
+ return;
+
+ evt_rsrc->eth_rx_queues = num_eth_rx_queues;
+}
+
+#define MAX_JUMBO_PKT_LEN 9600
+
+static const char short_options[] =
+ "p:" /* portmask */
+ "P" /* promiscuous */
+ "L" /* enable long prefix match */
+ "E" /* enable exact match */
+ ;
+
+#define CMD_LINE_OPT_CONFIG "config"
+#define CMD_LINE_OPT_ETH_DEST "eth-dest"
+#define CMD_LINE_OPT_NO_NUMA "no-numa"
+#define CMD_LINE_OPT_IPV6 "ipv6"
+#define CMD_LINE_OPT_ENABLE_JUMBO "enable-jumbo"
+#define CMD_LINE_OPT_HASH_ENTRY_NUM "hash-entry-num"
+#define CMD_LINE_OPT_PARSE_PTYPE "parse-ptype"
+#define CMD_LINE_OPT_PER_PORT_POOL "per-port-pool"
+#define CMD_LINE_OPT_MODE "mode"
+#define CMD_LINE_OPT_EVENTQ_SYNC "eventq-sched"
+#define CMD_LINE_OPT_EVENT_ETH_RX_QUEUES "event-eth-rxqs"
+enum {
+ /* long options mapped to a short option */
+
+ /* first long only option value must be >= 256, so that we won't
+ * conflict with short options */
+ CMD_LINE_OPT_MIN_NUM = 256,
+ CMD_LINE_OPT_CONFIG_NUM,
+ CMD_LINE_OPT_ETH_DEST_NUM,
+ CMD_LINE_OPT_NO_NUMA_NUM,
+ CMD_LINE_OPT_IPV6_NUM,
+ CMD_LINE_OPT_ENABLE_JUMBO_NUM,
+ CMD_LINE_OPT_HASH_ENTRY_NUM_NUM,
+ CMD_LINE_OPT_PARSE_PTYPE_NUM,
+ CMD_LINE_OPT_PARSE_PER_PORT_POOL,
+ CMD_LINE_OPT_MODE_NUM,
+ CMD_LINE_OPT_EVENTQ_SYNC_NUM,
+ CMD_LINE_OPT_EVENT_ETH_RX_QUEUES_NUM,
+};
+
+static const struct option lgopts[] = {
+ {CMD_LINE_OPT_CONFIG, 1, 0, CMD_LINE_OPT_CONFIG_NUM},
+ {CMD_LINE_OPT_ETH_DEST, 1, 0, CMD_LINE_OPT_ETH_DEST_NUM},
+ {CMD_LINE_OPT_NO_NUMA, 0, 0, CMD_LINE_OPT_NO_NUMA_NUM},
+ {CMD_LINE_OPT_IPV6, 0, 0, CMD_LINE_OPT_IPV6_NUM},
+ {CMD_LINE_OPT_ENABLE_JUMBO, 0, 0, CMD_LINE_OPT_ENABLE_JUMBO_NUM},
+ {CMD_LINE_OPT_HASH_ENTRY_NUM, 1, 0, CMD_LINE_OPT_HASH_ENTRY_NUM_NUM},
+ {CMD_LINE_OPT_PARSE_PTYPE, 0, 0, CMD_LINE_OPT_PARSE_PTYPE_NUM},
+ {CMD_LINE_OPT_PER_PORT_POOL, 0, 0, CMD_LINE_OPT_PARSE_PER_PORT_POOL},
+ {CMD_LINE_OPT_MODE, 1, 0, CMD_LINE_OPT_MODE_NUM},
+ {CMD_LINE_OPT_EVENTQ_SYNC, 1, 0, CMD_LINE_OPT_EVENTQ_SYNC_NUM},
+ {CMD_LINE_OPT_EVENT_ETH_RX_QUEUES, 1, 0,
+ CMD_LINE_OPT_EVENT_ETH_RX_QUEUES_NUM},
+ {NULL, 0, 0, 0}
+};
+
+/*
+ * This expression is used to calculate the number of mbufs needed
+ * depending on user input, taking into account memory for rx and
+ * tx hardware rings, cache per lcore and mtable per port per lcore.
+ * RTE_MAX is used to ensure that NB_MBUF never goes below a minimum
+ * value of 8192
+ */
+#define NB_MBUF(nports) RTE_MAX( \
+ (nports*nb_rx_queue*nb_rxd + \
+ nports*nb_lcores*MAX_PKT_BURST + \
+ nports*n_tx_queue*nb_txd + \
+ nb_lcores*MEMPOOL_CACHE_SIZE), \
+ (unsigned)8192)
+
/* Parse the argument given in the command line of the application */
static int
parse_args(int argc, char **argv)
char **argvopt;
int option_index;
char *prgname = argv[0];
- static struct option lgopts[] = {
- {"config", 1, 0, 0},
- {"no-numa", 0, 0, 0},
- {NULL, 0, 0, 0}
- };
+ uint8_t lcore_params = 0;
+ uint8_t eventq_sched = 0;
+ uint8_t eth_rx_q = 0;
+ struct l3fwd_event_resources *evt_rsrc = l3fwd_get_eventdev_rsrc();
argvopt = argv;
- while ((opt = getopt_long(argc, argvopt, "p:P",
+ /* Error or normal output strings. */
+ while ((opt = getopt_long(argc, argvopt, short_options,
lgopts, &option_index)) != EOF) {
switch (opt) {
case 'p':
enabled_port_mask = parse_portmask(optarg);
if (enabled_port_mask == 0) {
- printf("invalid portmask\n");
+ fprintf(stderr, "Invalid portmask\n");
print_usage(prgname);
return -1;
}
break;
+
case 'P':
- printf("Promiscuous mode selected\n");
promiscuous_on = 1;
break;
+ case 'E':
+ l3fwd_em_on = 1;
+ break;
+
+ case 'L':
+ l3fwd_lpm_on = 1;
+ break;
+
/* long options */
- case 0:
- if (!strcmp(lgopts[option_index].name, "config")) {
- ret = parse_config(optarg);
- if (ret) {
- printf("invalid config\n");
+ case CMD_LINE_OPT_CONFIG_NUM:
+ ret = parse_config(optarg);
+ if (ret) {
+ fprintf(stderr, "Invalid config\n");
+ print_usage(prgname);
+ return -1;
+ }
+ lcore_params = 1;
+ break;
+
+ case CMD_LINE_OPT_ETH_DEST_NUM:
+ parse_eth_dest(optarg);
+ break;
+
+ case CMD_LINE_OPT_NO_NUMA_NUM:
+ numa_on = 0;
+ break;
+
+ case CMD_LINE_OPT_IPV6_NUM:
+ ipv6 = 1;
+ break;
+
+ case CMD_LINE_OPT_ENABLE_JUMBO_NUM: {
+ const struct option lenopts = {
+ "max-pkt-len", required_argument, 0, 0
+ };
+
+ port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
+ port_conf.txmode.offloads |= DEV_TX_OFFLOAD_MULTI_SEGS;
+
+ /*
+ * if no max-pkt-len set, use the default
+ * value RTE_ETHER_MAX_LEN.
+ */
+ if (getopt_long(argc, argvopt, "",
+ &lenopts, &option_index) == 0) {
+ ret = parse_max_pkt_len(optarg);
+ if (ret < 64 || ret > MAX_JUMBO_PKT_LEN) {
+ fprintf(stderr,
+ "invalid maximum packet length\n");
print_usage(prgname);
return -1;
}
+ port_conf.rxmode.max_rx_pkt_len = ret;
}
+ break;
+ }
- if (!strcmp(lgopts[option_index].name, "no-numa")) {
- printf("numa is disabled \n");
- numa_on = 0;
+ case CMD_LINE_OPT_HASH_ENTRY_NUM_NUM:
+ ret = parse_hash_entry_number(optarg);
+ if ((ret > 0) && (ret <= L3FWD_HASH_ENTRIES)) {
+ hash_entry_number = ret;
+ } else {
+ fprintf(stderr, "invalid hash entry number\n");
+ print_usage(prgname);
+ return -1;
}
break;
+ case CMD_LINE_OPT_PARSE_PTYPE_NUM:
+ printf("soft parse-ptype is enabled\n");
+ parse_ptype = 1;
+ break;
+
+ case CMD_LINE_OPT_PARSE_PER_PORT_POOL:
+ printf("per port buffer pool is enabled\n");
+ per_port_pool = 1;
+ break;
+
+ case CMD_LINE_OPT_MODE_NUM:
+ parse_mode(optarg);
+ break;
+
+ case CMD_LINE_OPT_EVENTQ_SYNC_NUM:
+ parse_eventq_sched(optarg);
+ eventq_sched = 1;
+ break;
+
+ case CMD_LINE_OPT_EVENT_ETH_RX_QUEUES_NUM:
+ parse_event_eth_rx_queues(optarg);
+ eth_rx_q = 1;
+ break;
+
default:
print_usage(prgname);
return -1;
}
}
- if (optind >= 0)
- argv[optind-1] = prgname;
+ /* If both LPM and EM are selected, return error. */
+ if (l3fwd_lpm_on && l3fwd_em_on) {
+ fprintf(stderr, "LPM and EM are mutually exclusive, select only one\n");
+ return -1;
+ }
- ret = optind-1;
- optind = 0; /* reset getopt lib */
- return ret;
-}
+ if (evt_rsrc->enabled && lcore_params) {
+ fprintf(stderr, "lcore config is not valid when event mode is selected\n");
+ return -1;
+ }
-static void
-print_ethaddr(const char *name, const struct ether_addr *eth_addr)
-{
- printf ("%s%02X:%02X:%02X:%02X:%02X:%02X", name,
- eth_addr->addr_bytes[0],
- eth_addr->addr_bytes[1],
- eth_addr->addr_bytes[2],
- eth_addr->addr_bytes[3],
- eth_addr->addr_bytes[4],
- eth_addr->addr_bytes[5]);
-}
+ if (!evt_rsrc->enabled && eth_rx_q) {
+ fprintf(stderr, "eth_rx_queues is valid only when event mode is selected\n");
+ return -1;
+ }
-#if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
-static void
-setup_hash(int socketid)
-{
- unsigned i;
- int ret;
- char s[64];
+ if (!evt_rsrc->enabled && eventq_sched) {
+ fprintf(stderr, "eventq_sched is valid only when event mode is selected\n");
+ return -1;
+ }
- /* create hashes */
- rte_snprintf(s, sizeof(s), "l3fwd_hash_%d", socketid);
- l3fwd_hash_params.name = s;
- l3fwd_hash_params.socket_id = socketid;
- l3fwd_lookup_struct[socketid] = rte_hash_create(&l3fwd_hash_params);
- if (l3fwd_lookup_struct[socketid] == NULL)
- rte_exit(EXIT_FAILURE, "Unable to create the l3fwd hash on "
- "socket %d\n", socketid);
-
- /* populate the hash */
- for (i = 0; i < L3FWD_NUM_ROUTES; i++) {
- ret = rte_hash_add_key (l3fwd_lookup_struct[socketid],
- (void *) &l3fwd_route_array[i].key);
- if (ret < 0) {
- rte_exit(EXIT_FAILURE, "Unable to add entry %u to the"
- "l3fwd hash on socket %d\n", i, socketid);
- }
- l3fwd_out_if[ret] = l3fwd_route_array[i].if_out;
- printf("Hash: Adding key\n");
- print_key(l3fwd_route_array[i].key);
+ /*
+ * Nothing is selected, pick longest-prefix match
+ * as default match.
+ */
+ if (!l3fwd_lpm_on && !l3fwd_em_on) {
+ fprintf(stderr, "LPM or EM none selected, default LPM on\n");
+ l3fwd_lpm_on = 1;
}
+
+ /*
+ * ipv6 and hash flags are valid only for
+ * exact macth, reset them to default for
+ * longest-prefix match.
+ */
+ if (l3fwd_lpm_on) {
+ ipv6 = 0;
+ hash_entry_number = HASH_ENTRY_NUMBER_DEFAULT;
+ }
+
+ if (optind >= 0)
+ argv[optind-1] = prgname;
+
+ ret = optind-1;
+ optind = 1; /* reset getopt lib */
+ return ret;
}
-#endif
-#if (APP_LOOKUP_METHOD == APP_LOOKUP_LPM)
static void
-setup_lpm(int socketid)
+print_ethaddr(const char *name, const struct rte_ether_addr *eth_addr)
{
- unsigned i;
- int ret;
- char s[64];
-
- /* create the LPM table */
- rte_snprintf(s, sizeof(s), "L3FWD_LPM_%d", socketid);
- l3fwd_lookup_struct[socketid] = rte_lpm_create(s, socketid,
- L3FWD_LPM_MAX_RULES, RTE_LPM_MEMZONE);
- if (l3fwd_lookup_struct[socketid] == NULL)
- rte_exit(EXIT_FAILURE, "Unable to create the l3fwd LPM table"
- " on socket %d\n", socketid);
-
- /* populate the LPM table */
- for (i = 0; i < L3FWD_NUM_ROUTES; i++) {
- ret = rte_lpm_add(l3fwd_lookup_struct[socketid],
- l3fwd_route_array[i].ip,
- l3fwd_route_array[i].depth,
- l3fwd_route_array[i].if_out);
-
- if (ret < 0) {
- rte_exit(EXIT_FAILURE, "Unable to add entry %u to the "
- "l3fwd LPM table on socket %d\n",
- i, socketid);
- }
-
- printf("LPM: Adding route 0x%08x / %d (%d)\n",
- (unsigned)l3fwd_route_array[i].ip,
- l3fwd_route_array[i].depth,
- l3fwd_route_array[i].if_out);
- }
+ char buf[RTE_ETHER_ADDR_FMT_SIZE];
+ rte_ether_format_addr(buf, RTE_ETHER_ADDR_FMT_SIZE, eth_addr);
+ printf("%s%s", name, buf);
}
-#endif
-static int
-init_mem(void)
+int
+init_mem(uint16_t portid, unsigned int nb_mbuf)
{
struct lcore_conf *qconf;
int socketid;
socketid = 0;
if (socketid >= NB_SOCKETS) {
- rte_exit(EXIT_FAILURE, "Socket %d of lcore %u is out of range %d\n",
+ rte_exit(EXIT_FAILURE,
+ "Socket %d of lcore %u is out of range %d\n",
socketid, lcore_id, NB_SOCKETS);
}
- if (pktmbuf_pool[socketid] == NULL) {
- rte_snprintf(s, sizeof(s), "mbuf_pool_%d", socketid);
- pktmbuf_pool[socketid] =
- rte_mempool_create(s, NB_MBUF, MBUF_SIZE, 32,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- socketid, 0);
- if (pktmbuf_pool[socketid] == NULL)
+
+ if (pktmbuf_pool[portid][socketid] == NULL) {
+ snprintf(s, sizeof(s), "mbuf_pool_%d:%d",
+ portid, socketid);
+ pktmbuf_pool[portid][socketid] =
+ rte_pktmbuf_pool_create(s, nb_mbuf,
+ MEMPOOL_CACHE_SIZE, 0,
+ RTE_MBUF_DEFAULT_BUF_SIZE, socketid);
+ if (pktmbuf_pool[portid][socketid] == NULL)
rte_exit(EXIT_FAILURE,
- "Cannot init mbuf pool on socket %d\n", socketid);
+ "Cannot init mbuf pool on socket %d\n",
+ socketid);
else
- printf("Allocated mbuf pool on socket %d\n", socketid);
+ printf("Allocated mbuf pool on socket %d\n",
+ socketid);
-#if (APP_LOOKUP_METHOD == APP_LOOKUP_LPM)
- setup_lpm(socketid);
-#else
- setup_hash(socketid);
-#endif
+ /* Setup either LPM or EM(f.e Hash). But, only once per
+ * available socket.
+ */
+ if (!lkp_per_socket[socketid]) {
+ l3fwd_lkp.setup(socketid);
+ lkp_per_socket[socketid] = 1;
+ }
}
qconf = &lcore_conf[lcore_id];
- qconf->lookup_struct = l3fwd_lookup_struct[socketid];
+ qconf->ipv4_lookup_struct =
+ l3fwd_lkp.get_ipv4_lookup_struct(socketid);
+ qconf->ipv6_lookup_struct =
+ l3fwd_lkp.get_ipv6_lookup_struct(socketid);
}
return 0;
}
-int
-MAIN(int argc, char **argv)
+/* Check the link status of all ports in up to 9s, and print them finally */
+static void
+check_all_ports_link_status(uint32_t port_mask)
{
- struct lcore_conf *qconf;
+#define CHECK_INTERVAL 100 /* 100ms */
+#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
+ uint16_t portid;
+ uint8_t count, all_ports_up, print_flag = 0;
struct rte_eth_link link;
int ret;
- unsigned nb_ports;
- uint16_t queueid;
- unsigned lcore_id;
- uint32_t n_tx_queue, nb_lcores;
- uint8_t portid, nb_rx_queue, queue, socketid;
- /* init EAL */
- ret = rte_eal_init(argc, argv);
- if (ret < 0)
- rte_exit(EXIT_FAILURE, "Invalid EAL parameters\n");
- argc -= ret;
- argv += ret;
+ printf("\nChecking link status");
+ fflush(stdout);
+ for (count = 0; count <= MAX_CHECK_TIME; count++) {
+ if (force_quit)
+ return;
+ all_ports_up = 1;
+ RTE_ETH_FOREACH_DEV(portid) {
+ if (force_quit)
+ return;
+ if ((port_mask & (1 << portid)) == 0)
+ continue;
+ memset(&link, 0, sizeof(link));
+ ret = rte_eth_link_get_nowait(portid, &link);
+ if (ret < 0) {
+ all_ports_up = 0;
+ if (print_flag == 1)
+ printf("Port %u link get failed: %s\n",
+ portid, rte_strerror(-ret));
+ continue;
+ }
+ /* print link status if flag set */
+ if (print_flag == 1) {
+ if (link.link_status)
+ printf(
+ "Port%d Link Up. Speed %u Mbps -%s\n",
+ portid, link.link_speed,
+ (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
+ ("full-duplex") : ("half-duplex\n"));
+ else
+ printf("Port %d Link Down\n", portid);
+ continue;
+ }
+ /* clear all_ports_up flag if any link down */
+ if (link.link_status == ETH_LINK_DOWN) {
+ all_ports_up = 0;
+ break;
+ }
+ }
+ /* after finally printing all link status, get out */
+ if (print_flag == 1)
+ break;
- /* parse application arguments (after the EAL ones) */
- ret = parse_args(argc, argv);
- if (ret < 0)
- rte_exit(EXIT_FAILURE, "Invalid L3FWD parameters\n");
+ if (all_ports_up == 0) {
+ printf(".");
+ fflush(stdout);
+ rte_delay_ms(CHECK_INTERVAL);
+ }
+
+ /* set the print_flag if all ports up or timeout */
+ if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
+ print_flag = 1;
+ printf("done\n");
+ }
+ }
+}
+
+static void
+signal_handler(int signum)
+{
+ if (signum == SIGINT || signum == SIGTERM) {
+ printf("\n\nSignal %d received, preparing to exit...\n",
+ signum);
+ force_quit = true;
+ }
+}
+
+static int
+prepare_ptype_parser(uint16_t portid, uint16_t queueid)
+{
+ if (parse_ptype) {
+ printf("Port %d: softly parse packet type info\n", portid);
+ if (rte_eth_add_rx_callback(portid, queueid,
+ l3fwd_lkp.cb_parse_ptype,
+ NULL))
+ return 1;
+
+ printf("Failed to add rx callback: port=%d\n", portid);
+ return 0;
+ }
+
+ if (l3fwd_lkp.check_ptype(portid))
+ return 1;
+
+ printf("port %d cannot parse packet type, please add --%s\n",
+ portid, CMD_LINE_OPT_PARSE_PTYPE);
+ return 0;
+}
+
+static void
+l3fwd_poll_resource_setup(void)
+{
+ uint8_t nb_rx_queue, queue, socketid;
+ struct rte_eth_dev_info dev_info;
+ uint32_t n_tx_queue, nb_lcores;
+ struct rte_eth_txconf *txconf;
+ struct lcore_conf *qconf;
+ uint16_t queueid, portid;
+ unsigned int nb_ports;
+ unsigned int lcore_id;
+ int ret;
if (check_lcore_params() < 0)
rte_exit(EXIT_FAILURE, "check_lcore_params failed\n");
if (ret < 0)
rte_exit(EXIT_FAILURE, "init_lcore_rx_queues failed\n");
- ret = init_mem();
- if (ret < 0)
- rte_exit(EXIT_FAILURE, "init_mem failed\n");
-
- /* init driver(s) */
- if (rte_pmd_init_all() < 0)
- rte_exit(EXIT_FAILURE, "Cannot init pmd\n");
-
- if (rte_eal_pci_probe() < 0)
- rte_exit(EXIT_FAILURE, "Cannot probe PCI\n");
-
- nb_ports = rte_eth_dev_count();
- if (nb_ports > MAX_PORTS)
- nb_ports = MAX_PORTS;
+ nb_ports = rte_eth_dev_count_avail();
- if (check_port_config(nb_ports) < 0)
+ if (check_port_config() < 0)
rte_exit(EXIT_FAILURE, "check_port_config failed\n");
nb_lcores = rte_lcore_count();
/* initialize all ports */
- for (portid = 0; portid < nb_ports; portid++) {
+ RTE_ETH_FOREACH_DEV(portid) {
+ struct rte_eth_conf local_port_conf = port_conf;
+
/* skip ports that are not enabled */
if ((enabled_port_mask & (1 << portid)) == 0) {
printf("\nSkipping disabled port %d\n", portid);
n_tx_queue = MAX_TX_QUEUE_PER_PORT;
printf("Creating queues: nb_rxq=%d nb_txq=%u... ",
nb_rx_queue, (unsigned)n_tx_queue );
+
+ ret = rte_eth_dev_info_get(portid, &dev_info);
+ if (ret != 0)
+ rte_exit(EXIT_FAILURE,
+ "Error during getting device (port %u) info: %s\n",
+ portid, strerror(-ret));
+
+ if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
+ local_port_conf.txmode.offloads |=
+ DEV_TX_OFFLOAD_MBUF_FAST_FREE;
+
+ local_port_conf.rx_adv_conf.rss_conf.rss_hf &=
+ dev_info.flow_type_rss_offloads;
+ if (local_port_conf.rx_adv_conf.rss_conf.rss_hf !=
+ port_conf.rx_adv_conf.rss_conf.rss_hf) {
+ printf("Port %u modified RSS hash function based on hardware support,"
+ "requested:%#"PRIx64" configured:%#"PRIx64"\n",
+ portid,
+ port_conf.rx_adv_conf.rss_conf.rss_hf,
+ local_port_conf.rx_adv_conf.rss_conf.rss_hf);
+ }
+
ret = rte_eth_dev_configure(portid, nb_rx_queue,
- (uint16_t)n_tx_queue, &port_conf);
+ (uint16_t)n_tx_queue, &local_port_conf);
if (ret < 0)
- rte_exit(EXIT_FAILURE, "Cannot configure device: err=%d, port=%d\n",
+ rte_exit(EXIT_FAILURE,
+ "Cannot configure device: err=%d, port=%d\n",
ret, portid);
- rte_eth_macaddr_get(portid, &ports_eth_addr[portid]);
+ ret = rte_eth_dev_adjust_nb_rx_tx_desc(portid, &nb_rxd,
+ &nb_txd);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE,
+ "Cannot adjust number of descriptors: err=%d, "
+ "port=%d\n", ret, portid);
+
+ ret = rte_eth_macaddr_get(portid, &ports_eth_addr[portid]);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE,
+ "Cannot get MAC address: err=%d, port=%d\n",
+ ret, portid);
+
print_ethaddr(" Address:", &ports_eth_addr[portid]);
printf(", ");
+ print_ethaddr("Destination:",
+ (const struct rte_ether_addr *)&dest_eth_addr[portid]);
+ printf(", ");
+ /*
+ * prepare src MACs for each port.
+ */
+ rte_ether_addr_copy(&ports_eth_addr[portid],
+ (struct rte_ether_addr *)(val_eth + portid) + 1);
+
+ /* init memory */
+ if (!per_port_pool) {
+ /* portid = 0; this is *not* signifying the first port,
+ * rather, it signifies that portid is ignored.
+ */
+ ret = init_mem(0, NB_MBUF(nb_ports));
+ } else {
+ ret = init_mem(portid, NB_MBUF(1));
+ }
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "init_mem failed\n");
/* init one TX queue per couple (lcore,port) */
queueid = 0;
continue;
if (numa_on)
- socketid = (uint8_t)rte_lcore_to_socket_id(lcore_id);
+ socketid =
+ (uint8_t)rte_lcore_to_socket_id(lcore_id);
else
socketid = 0;
printf("txq=%u,%d,%d ", lcore_id, queueid, socketid);
fflush(stdout);
+
+ txconf = &dev_info.default_txconf;
+ txconf->offloads = local_port_conf.txmode.offloads;
ret = rte_eth_tx_queue_setup(portid, queueid, nb_txd,
- socketid, &tx_conf);
+ socketid, txconf);
if (ret < 0)
- rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup: err=%d, "
+ rte_exit(EXIT_FAILURE,
+ "rte_eth_tx_queue_setup: err=%d, "
"port=%d\n", ret, portid);
qconf = &lcore_conf[lcore_id];
qconf->tx_queue_id[portid] = queueid;
queueid++;
+
+ qconf->tx_port_id[qconf->n_tx_port] = portid;
+ qconf->n_tx_port++;
}
printf("\n");
}
fflush(stdout);
/* init RX queues */
for(queue = 0; queue < qconf->n_rx_queue; ++queue) {
+ struct rte_eth_rxconf rxq_conf;
+
portid = qconf->rx_queue_list[queue].port_id;
queueid = qconf->rx_queue_list[queue].queue_id;
if (numa_on)
- socketid = (uint8_t)rte_lcore_to_socket_id(lcore_id);
+ socketid =
+ (uint8_t)rte_lcore_to_socket_id(lcore_id);
else
socketid = 0;
printf("rxq=%d,%d,%d ", portid, queueid, socketid);
fflush(stdout);
- ret = rte_eth_rx_queue_setup(portid, queueid, nb_rxd,
- socketid, &rx_conf, pktmbuf_pool[socketid]);
+ ret = rte_eth_dev_info_get(portid, &dev_info);
+ if (ret != 0)
+ rte_exit(EXIT_FAILURE,
+ "Error during getting device (port %u) info: %s\n",
+ portid, strerror(-ret));
+
+ rxq_conf = dev_info.default_rxconf;
+ rxq_conf.offloads = port_conf.rxmode.offloads;
+ if (!per_port_pool)
+ ret = rte_eth_rx_queue_setup(portid, queueid,
+ nb_rxd, socketid,
+ &rxq_conf,
+ pktmbuf_pool[0][socketid]);
+ else
+ ret = rte_eth_rx_queue_setup(portid, queueid,
+ nb_rxd, socketid,
+ &rxq_conf,
+ pktmbuf_pool[portid][socketid]);
if (ret < 0)
- rte_exit(EXIT_FAILURE, "rte_eth_rx_queue_setup: err=%d,"
- "port=%d\n", ret, portid);
+ rte_exit(EXIT_FAILURE,
+ "rte_eth_rx_queue_setup: err=%d, port=%d\n",
+ ret, portid);
}
}
+}
- printf("\n");
+static inline int
+l3fwd_service_enable(uint32_t service_id)
+{
+ uint8_t min_service_count = UINT8_MAX;
+ uint32_t slcore_array[RTE_MAX_LCORE];
+ unsigned int slcore = 0;
+ uint8_t service_count;
+ int32_t slcore_count;
+
+ if (!rte_service_lcore_count())
+ return -ENOENT;
+
+ slcore_count = rte_service_lcore_list(slcore_array, RTE_MAX_LCORE);
+ if (slcore_count < 0)
+ return -ENOENT;
+ /* Get the core which has least number of services running. */
+ while (slcore_count--) {
+ /* Reset default mapping */
+ rte_service_map_lcore_set(service_id,
+ slcore_array[slcore_count], 0);
+ service_count = rte_service_lcore_count_services(
+ slcore_array[slcore_count]);
+ if (service_count < min_service_count) {
+ slcore = slcore_array[slcore_count];
+ min_service_count = service_count;
+ }
+ }
+ if (rte_service_map_lcore_set(service_id, slcore, 1))
+ return -ENOENT;
+ rte_service_lcore_start(slcore);
+
+ return 0;
+}
+
+static void
+l3fwd_event_service_setup(void)
+{
+ struct l3fwd_event_resources *evt_rsrc = l3fwd_get_eventdev_rsrc();
+ struct rte_event_dev_info evdev_info;
+ uint32_t service_id, caps;
+ int ret, i;
+
+ rte_event_dev_info_get(evt_rsrc->event_d_id, &evdev_info);
+ if (!(evdev_info.event_dev_cap & RTE_EVENT_DEV_CAP_DISTRIBUTED_SCHED)) {
+ ret = rte_event_dev_service_id_get(evt_rsrc->event_d_id,
+ &service_id);
+ if (ret != -ESRCH && ret != 0)
+ rte_exit(EXIT_FAILURE,
+ "Error in starting eventdev service\n");
+ l3fwd_service_enable(service_id);
+ }
+
+ for (i = 0; i < evt_rsrc->rx_adptr.nb_rx_adptr; i++) {
+ ret = rte_event_eth_rx_adapter_caps_get(evt_rsrc->event_d_id,
+ evt_rsrc->rx_adptr.rx_adptr[i], &caps);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE,
+ "Failed to get Rx adapter[%d] caps\n",
+ evt_rsrc->rx_adptr.rx_adptr[i]);
+ ret = rte_event_eth_rx_adapter_service_id_get(
+ evt_rsrc->event_d_id,
+ &service_id);
+ if (ret != -ESRCH && ret != 0)
+ rte_exit(EXIT_FAILURE,
+ "Error in starting Rx adapter[%d] service\n",
+ evt_rsrc->rx_adptr.rx_adptr[i]);
+ l3fwd_service_enable(service_id);
+ }
+
+ for (i = 0; i < evt_rsrc->tx_adptr.nb_tx_adptr; i++) {
+ ret = rte_event_eth_tx_adapter_caps_get(evt_rsrc->event_d_id,
+ evt_rsrc->tx_adptr.tx_adptr[i], &caps);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE,
+ "Failed to get Rx adapter[%d] caps\n",
+ evt_rsrc->tx_adptr.tx_adptr[i]);
+ ret = rte_event_eth_tx_adapter_service_id_get(
+ evt_rsrc->event_d_id,
+ &service_id);
+ if (ret != -ESRCH && ret != 0)
+ rte_exit(EXIT_FAILURE,
+ "Error in starting Rx adapter[%d] service\n",
+ evt_rsrc->tx_adptr.tx_adptr[i]);
+ l3fwd_service_enable(service_id);
+ }
+}
+
+int
+main(int argc, char **argv)
+{
+ struct l3fwd_event_resources *evt_rsrc;
+ struct lcore_conf *qconf;
+ uint16_t queueid, portid;
+ unsigned int lcore_id;
+ uint8_t queue;
+ int i, ret;
+
+ /* init EAL */
+ ret = rte_eal_init(argc, argv);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Invalid EAL parameters\n");
+ argc -= ret;
+ argv += ret;
+
+ force_quit = false;
+ signal(SIGINT, signal_handler);
+ signal(SIGTERM, signal_handler);
+
+ /* pre-init dst MACs for all ports to 02:00:00:00:00:xx */
+ for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++) {
+ dest_eth_addr[portid] =
+ RTE_ETHER_LOCAL_ADMIN_ADDR + ((uint64_t)portid << 40);
+ *(uint64_t *)(val_eth + portid) = dest_eth_addr[portid];
+ }
+
+ evt_rsrc = l3fwd_get_eventdev_rsrc();
+ /* parse application arguments (after the EAL ones) */
+ ret = parse_args(argc, argv);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Invalid L3FWD parameters\n");
+
+ /* Setup function pointers for lookup method. */
+ setup_l3fwd_lookup_tables();
+
+ evt_rsrc->per_port_pool = per_port_pool;
+ evt_rsrc->pkt_pool = pktmbuf_pool;
+ evt_rsrc->port_mask = enabled_port_mask;
+ /* Configure eventdev parameters if user has requested */
+ if (evt_rsrc->enabled) {
+ l3fwd_event_resource_setup(&port_conf);
+ if (l3fwd_em_on)
+ l3fwd_lkp.main_loop = evt_rsrc->ops.em_event_loop;
+ else
+ l3fwd_lkp.main_loop = evt_rsrc->ops.lpm_event_loop;
+ l3fwd_event_service_setup();
+ } else
+ l3fwd_poll_resource_setup();
/* start ports */
- for (portid = 0; portid < nb_ports; portid++) {
+ RTE_ETH_FOREACH_DEV(portid) {
if ((enabled_port_mask & (1 << portid)) == 0) {
continue;
}
/* Start device */
ret = rte_eth_dev_start(portid);
if (ret < 0)
- rte_exit(EXIT_FAILURE, "rte_eth_dev_start: err=%d, port=%d\n",
+ rte_exit(EXIT_FAILURE,
+ "rte_eth_dev_start: err=%d, port=%d\n",
ret, portid);
- printf("done: Port %d ", portid);
-
- /* get link status */
- rte_eth_link_get(portid, &link);
- if (link.link_status) {
- printf(" Link Up - speed %u Mbps - %s\n",
- (unsigned) link.link_speed,
- (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
- ("full-duplex") : ("half-duplex\n"));
- } else {
- printf(" Link Down\n");
- }
/*
* If enabled, put device in promiscuous mode.
* This allows IO forwarding mode to forward packets
* to itself through 2 cross-connected ports of the
* target machine.
*/
- if (promiscuous_on)
- rte_eth_promiscuous_enable(portid);
+ if (promiscuous_on) {
+ ret = rte_eth_promiscuous_enable(portid);
+ if (ret != 0)
+ rte_exit(EXIT_FAILURE,
+ "rte_eth_promiscuous_enable: err=%s, port=%u\n",
+ rte_strerror(-ret), portid);
+ }
}
+ printf("\n");
+
+ for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
+ if (rte_lcore_is_enabled(lcore_id) == 0)
+ continue;
+ qconf = &lcore_conf[lcore_id];
+ for (queue = 0; queue < qconf->n_rx_queue; ++queue) {
+ portid = qconf->rx_queue_list[queue].port_id;
+ queueid = qconf->rx_queue_list[queue].queue_id;
+ if (prepare_ptype_parser(portid, queueid) == 0)
+ rte_exit(EXIT_FAILURE, "ptype check fails\n");
+ }
+ }
+
+ check_all_ports_link_status(enabled_port_mask);
+
+ ret = 0;
/* launch per-lcore init on every lcore */
- rte_eal_mp_remote_launch(main_loop, NULL, CALL_MASTER);
- RTE_LCORE_FOREACH_SLAVE(lcore_id) {
- if (rte_eal_wait_lcore(lcore_id) < 0)
- return -1;
+ rte_eal_mp_remote_launch(l3fwd_lkp.main_loop, NULL, CALL_MASTER);
+ if (evt_rsrc->enabled) {
+ for (i = 0; i < evt_rsrc->rx_adptr.nb_rx_adptr; i++)
+ rte_event_eth_rx_adapter_stop(
+ evt_rsrc->rx_adptr.rx_adptr[i]);
+ for (i = 0; i < evt_rsrc->tx_adptr.nb_tx_adptr; i++)
+ rte_event_eth_tx_adapter_stop(
+ evt_rsrc->tx_adptr.tx_adptr[i]);
+
+ RTE_ETH_FOREACH_DEV(portid) {
+ if ((enabled_port_mask & (1 << portid)) == 0)
+ continue;
+ rte_eth_dev_stop(portid);
+ }
+
+ rte_eal_mp_wait_lcore();
+ RTE_ETH_FOREACH_DEV(portid) {
+ if ((enabled_port_mask & (1 << portid)) == 0)
+ continue;
+ rte_eth_dev_close(portid);
+ }
+
+ rte_event_dev_stop(evt_rsrc->event_d_id);
+ rte_event_dev_close(evt_rsrc->event_d_id);
+
+ } else {
+ rte_eal_mp_wait_lcore();
+
+ RTE_ETH_FOREACH_DEV(portid) {
+ if ((enabled_port_mask & (1 << portid)) == 0)
+ continue;
+ printf("Closing port %d...", portid);
+ rte_eth_dev_stop(portid);
+ rte_eth_dev_close(portid);
+ printf(" Done\n");
+ }
}
+ printf("Bye...\n");
- return 0;
+ return ret;
}