#include <rte_sched.h>
#include <rte_cycles.h>
#include <rte_string_fns.h>
+#include <rte_cfgfile.h>
#include "main.h"
#include "cfg_file.h"
.hw_ip_checksum = 0, /**< IP checksum offload disabled */
.hw_vlan_filter = 0, /**< VLAN filtering disabled */
.jumbo_frame = 0, /**< Jumbo Frame Support disabled */
- .hw_strip_crc = 0, /**< CRC stripped by hardware */
+ .hw_strip_crc = 1, /**< CRC stripped by hardware */
},
.txmode = {
.mq_mode = ETH_DCB_NONE,
};
static int
-app_init_port(uint8_t portid, struct rte_mempool *mp)
+app_init_port(uint16_t portid, struct rte_mempool *mp)
{
int ret;
struct rte_eth_link link;
struct rte_eth_rxconf rx_conf;
struct rte_eth_txconf tx_conf;
+ uint16_t rx_size;
+ uint16_t tx_size;
/* check if port already initialized (multistream configuration) */
if (app_inited_port_mask & (1u << portid))
tx_conf.txq_flags = ETH_TXQ_FLAGS_NOMULTSEGS | ETH_TXQ_FLAGS_NOOFFLOADS;
/* init port */
- RTE_LOG(INFO, APP, "Initializing port %"PRIu8"... ", portid);
+ RTE_LOG(INFO, APP, "Initializing port %"PRIu16"... ", portid);
fflush(stdout);
ret = rte_eth_dev_configure(portid, 1, 1, &port_conf);
if (ret < 0)
- rte_exit(EXIT_FAILURE, "Cannot configure device: "
- "err=%d, port=%"PRIu8"\n", ret, portid);
+ rte_exit(EXIT_FAILURE,
+ "Cannot configure device: err=%d, port=%u\n",
+ ret, portid);
+
+ rx_size = ring_conf.rx_size;
+ tx_size = ring_conf.tx_size;
+ ret = rte_eth_dev_adjust_nb_rx_tx_desc(portid, &rx_size, &tx_size);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE,
+ "rte_eth_dev_adjust_nb_rx_tx_desc: err=%d,port=%u\n",
+ ret, portid);
+ ring_conf.rx_size = rx_size;
+ ring_conf.tx_size = tx_size;
/* init one RX queue */
fflush(stdout);
ret = rte_eth_rx_queue_setup(portid, 0, (uint16_t)ring_conf.rx_size,
rte_eth_dev_socket_id(portid), &rx_conf, mp);
if (ret < 0)
- rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup: "
- "err=%d, port=%"PRIu8"\n", ret, portid);
+ rte_exit(EXIT_FAILURE,
+ "rte_eth_tx_queue_setup: err=%d, port=%u\n",
+ ret, portid);
/* init one TX queue */
fflush(stdout);
ret = rte_eth_tx_queue_setup(portid, 0,
(uint16_t)ring_conf.tx_size, rte_eth_dev_socket_id(portid), &tx_conf);
if (ret < 0)
- rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup: err=%d, "
- "port=%"PRIu8" queue=%d\n", ret, portid, 0);
+ rte_exit(EXIT_FAILURE,
+ "rte_eth_tx_queue_setup: err=%d, port=%u queue=%d\n",
+ ret, portid, 0);
/* Start device */
ret = rte_eth_dev_start(portid);
if (ret < 0)
- rte_exit(EXIT_FAILURE, "rte_pmd_port_start: "
- "err=%d, port=%"PRIu8"\n", ret, portid);
+ rte_exit(EXIT_FAILURE,
+ "rte_pmd_port_start: err=%d, port=%u\n",
+ ret, portid);
printf("done: ");
uint32_t pipe, subport;
int err;
- rte_eth_link_get((uint8_t)portid, &link);
+ rte_eth_link_get(portid, &link);
port_params.socket = socketid;
port_params.rate = (uint64_t) link.link_speed * 1000 * 1000 / 8;
{
if (profile == NULL)
return 0;
-
- struct cfg_file *cfg_file = cfg_load(profile, 0);
- if (cfg_file == NULL)
+ struct rte_cfgfile *file = rte_cfgfile_load(profile, 0);
+ if (file == NULL)
rte_exit(EXIT_FAILURE, "Cannot load configuration profile %s\n", profile);
- cfg_load_port(cfg_file, &port_params);
- cfg_load_subport(cfg_file, subport_params);
- cfg_load_pipe(cfg_file, pipe_profiles);
+ cfg_load_port(file, &port_params);
+ cfg_load_subport(file, subport_params);
+ cfg_load_pipe(file, pipe_profiles);
- cfg_close(cfg_file);
+ rte_cfgfile_close(file);
return 0;
}
/* create the mbuf pools for each RX Port */
snprintf(pool_name, MAX_NAME_LEN, "mbuf_pool%u", i);
- qos_conf[i].mbuf_pool = rte_mempool_create(pool_name, mp_size, MBUF_SIZE,
- burst_conf.rx_burst * 4,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_eth_dev_socket_id(qos_conf[i].rx_port),
- 0);
+ qos_conf[i].mbuf_pool = rte_pktmbuf_pool_create(pool_name,
+ mp_size, burst_conf.rx_burst * 4, 0,
+ RTE_MBUF_DEFAULT_BUF_SIZE,
+ rte_eth_dev_socket_id(qos_conf[i].rx_port));
if (qos_conf[i].mbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot init mbuf pool for socket %u\n", i);