-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2014 Intel Corporation
*/
#include <fcntl.h>
#include "../include/conf.h"
-static const struct rte_eth_conf port_conf = {
+static struct rte_eth_conf port_conf = {
.rxmode = {
.split_hdr_size = 0,
- .header_split = 0, /**< Header Split disabled */
- .hw_ip_checksum = 0, /**< IP csum offload disabled */
- .hw_vlan_filter = 0, /**< VLAN filtering disabled */
- .jumbo_frame = 0, /**< Jumbo Frame disabled */
- .hw_strip_crc = 1, /**< CRC stripped by hardware */
+ .ignore_offload_bitfield = 1,
+ .offloads = DEV_RX_OFFLOAD_CRC_STRIP,
},
.txmode = {
.mq_mode = ETH_DCB_NONE,
};
-void configure_eth_port(uint8_t port_id)
+void configure_eth_port(uint16_t port_id)
{
int ret;
uint16_t nb_rxd = RX_DESC_PER_QUEUE;
uint16_t nb_txd = TX_DESC_PER_QUEUE;
+ struct rte_eth_rxconf rxq_conf;
+ struct rte_eth_txconf txq_conf;
+ struct rte_eth_dev_info dev_info;
+ struct rte_eth_conf local_port_conf = port_conf;
rte_eth_dev_stop(port_id);
- ret = rte_eth_dev_configure(port_id, 1, 1, &port_conf);
+ rte_eth_dev_info_get(port_id, &dev_info);
+ if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
+ local_port_conf.txmode.offloads |=
+ DEV_TX_OFFLOAD_MBUF_FAST_FREE;
+ ret = rte_eth_dev_configure(port_id, 1, 1, &local_port_conf);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Cannot configure port %u (error %d)\n",
(unsigned int) port_id, ret);
(unsigned int) port_id, ret);
/* Initialize the port's RX queue */
+ rxq_conf = dev_info.default_rxconf;
+ rxq_conf.offloads = local_port_conf.rxmode.offloads;
ret = rte_eth_rx_queue_setup(port_id, 0, nb_rxd,
rte_eth_dev_socket_id(port_id),
- NULL,
+ &rxq_conf,
mbuf_pool);
if (ret < 0)
rte_exit(EXIT_FAILURE,
(unsigned int) port_id, ret);
/* Initialize the port's TX queue */
+ txq_conf = dev_info.default_txconf;
+ txq_conf.txq_flags = ETH_TXQ_FLAGS_IGNORE;
+ txq_conf.offloads = local_port_conf.txmode.offloads;
ret = rte_eth_tx_queue_setup(port_id, 0, nb_txd,
rte_eth_dev_socket_id(port_id),
- NULL);
+ &txq_conf);
if (ret < 0)
rte_exit(EXIT_FAILURE,
"Failed to setup TX queue on port %u (error %d)\n",
void
init_dpdk(void)
{
- if (rte_eth_dev_count() < 2)
+ if (rte_eth_dev_count_avail() < 2)
rte_exit(EXIT_FAILURE, "Not enough ethernet port available\n");
}
-void init_ring(int lcore_id, uint8_t port_id)
+void init_ring(int lcore_id, uint16_t port_id)
{
struct rte_ring *ring;
char ring_name[RTE_RING_NAMESIZE];
void
pair_ports(void)
{
- uint8_t i, j;
+ uint16_t i, j;
/* Pair ports with their "closest neighbour" in the portmask */
for (i = 0; i < RTE_MAX_ETHPORTS; i++)
if (is_bit_set(i, portmask))
- for (j = (uint8_t) (i + 1); j < RTE_MAX_ETHPORTS; j++)
+ for (j = i + 1; j < RTE_MAX_ETHPORTS; j++)
if (is_bit_set(j, portmask)) {
port_pairs[i] = j;
port_pairs[j] = i;