* @param capability Description of the symmetric crypto capability.
* @param key_size Auth key size.
* @param digest_size Auth digest size.
- * @param aad_size Auth aad size.
* @param iv_size Auth initial vector size.
*
* @return
int
rte_cryptodev_sym_capability_check_auth(
const struct rte_cryptodev_symmetric_capability *capability,
- uint16_t key_size, uint16_t digest_size, uint16_t aad_size,
- uint16_t iv_size);
+ uint16_t key_size, uint16_t digest_size, uint16_t iv_size);
/**
* Check if key, digest, AAD and initial vector sizes are supported
*
* @param dev_id The identifier of the device to configure.
* @param config The crypto device configuration structure.
- * @param session_pool Pointer to device session mempool
*
* @return
* - 0: Success, device configured.
* - <0: Error code returned by the driver configuration function.
*/
extern int
-rte_cryptodev_configure(uint8_t dev_id, struct rte_cryptodev_config *config,
- struct rte_mempool *session_pool);
+rte_cryptodev_configure(uint8_t dev_id, struct rte_cryptodev_config *config);
/**
* Start an device.
* *SOCKET_ID_ANY* if there is no NUMA constraint
* for the DMA memory allocated for the receive
* queue pair.
+ * @param session_pool Pointer to device session mempool, used
+ * for session-less operations.
*
* @return
* - 0: Success, queue pair correctly set up.
*/
extern int
rte_cryptodev_queue_pair_setup(uint8_t dev_id, uint16_t queue_pair_id,
- const struct rte_cryptodev_qp_conf *qp_conf, int socket_id);
+ const struct rte_cryptodev_qp_conf *qp_conf, int socket_id,
+ struct rte_mempool *session_pool);
/**
* Start a specified queue pair of a device. It is used
/** Cryptodev symmetric crypto session */
struct rte_cryptodev_sym_session {
- RTE_STD_C11
- struct {
- uint8_t dev_id;
- /**< Device Id */
- uint8_t driver_id;
- /** Crypto driver identifier session created on */
- struct rte_mempool *mp;
- /**< Mempool session allocated from */
- } __rte_aligned(8);
- /**< Public symmetric session details */
-
- __extension__ char _private[0];
+ __extension__ void *sess_private_data[0];
/**< Private session material */
};
/**
- * Initialise a session for symmetric cryptographic operations.
+ * Create symmetric crypto session header (generic with no private data)
*
- * This function is used by the client to initialize immutable
- * parameters of symmetric cryptographic operation.
- * To perform the operation the rte_cryptodev_enqueue_burst function is
- * used. Each mbuf should contain a reference to the session
- * pointer returned from this function contained within it's crypto_op if a
- * session-based operation is being provisioned. Memory to contain the session
- * information is allocated from within mempool managed by the cryptodev.
+ * @param mempool Symmetric session mempool to allocate session
+ * objects from
+ * @return
+ * - On success return pointer to sym-session
+ * - On failure returns NULL
+ */
+struct rte_cryptodev_sym_session *
+rte_cryptodev_sym_session_create(struct rte_mempool *mempool);
+
+/**
+ * Frees symmetric crypto session header, after checking that all
+ * the device private data has been freed, returning it
+ * to its original mempool.
*
- * The rte_cryptodev_session_free must be called to free allocated
- * memory when the session is no longer required.
+ * @param sess Session header to be freed.
*
- * @param dev_id The device identifier.
- * @param xform Crypto transform chain.
+ * @return
+ * - 0 if successful.
+ * - -EINVAL if session is NULL.
+ * - -EBUSY if not all device private data has been freed.
+ */
+int
+rte_cryptodev_sym_session_free(struct rte_cryptodev_sym_session *sess);
+/**
+ * Fill out private data for the device id, based on its device type.
+ *
+ * @param dev_id ID of device that we want the session to be used on
+ * @param sess Session where the private data will be attached to
+ * @param xforms Symmetric crypto transform operations to apply on flow
+ * processed with this session
+ * @param mempool Mempool where the private data is allocated.
*
* @return
- * Pointer to the created session or NULL
+ * - On success, zero.
+ * - On failure, a negative value.
*/
-extern struct rte_cryptodev_sym_session *
-rte_cryptodev_sym_session_create(uint8_t dev_id,
- struct rte_crypto_sym_xform *xform);
+int
+rte_cryptodev_sym_session_init(uint8_t dev_id,
+ struct rte_cryptodev_sym_session *sess,
+ struct rte_crypto_sym_xform *xforms,
+ struct rte_mempool *mempool);
/**
- * Free the memory associated with a previously allocated session.
+ * Frees private data for the device id, based on its device type,
+ * returning it to its mempool.
*
- * @param dev_id The device identifier.
- * @param session Session pointer previously allocated by
- * *rte_cryptodev_sym_session_create*.
+ * @param dev_id ID of device that uses the session.
+ * @param sess Session containing the reference to the private data
*
* @return
- * NULL on successful freeing of session.
- * Session pointer on failure to free session.
+ * - 0 if successful.
+ * - -EINVAL if device is invalid or session is NULL.
*/
-extern struct rte_cryptodev_sym_session *
-rte_cryptodev_sym_session_free(uint8_t dev_id,
- struct rte_cryptodev_sym_session *session);
+int
+rte_cryptodev_sym_session_clear(uint8_t dev_id,
+ struct rte_cryptodev_sym_session *sess);
+
+/**
+ * Get the size of the header session, for all registered drivers.
+ *
+ * @return
+ * Size of the header session.
+ */
+unsigned int
+rte_cryptodev_get_header_session_size(void);
/**
* Get the size of the private session data for a device.
/**
* Attach queue pair with sym session.
*
- * @param qp_id Queue pair to which session will be attached.
+ * @param dev_id Device to which the session will be attached.
+ * @param qp_id Queue pair to which the session will be attached.
* @param session Session pointer previously allocated by
* *rte_cryptodev_sym_session_create*.
*
* - On failure, a negative value.
*/
int
-rte_cryptodev_queue_pair_attach_sym_session(uint16_t qp_id,
+rte_cryptodev_queue_pair_attach_sym_session(uint8_t dev_id, uint16_t qp_id,
struct rte_cryptodev_sym_session *session);
/**
* Detach queue pair with sym session.
*
- * @param qp_id Queue pair to which session is attached.
+ * @param dev_id Device to which the session is attached.
+ * @param qp_id Queue pair to which the session is attached.
* @param session Session pointer previously allocated by
* *rte_cryptodev_sym_session_create*.
*
* - On failure, a negative value.
*/
int
-rte_cryptodev_queue_pair_detach_sym_session(uint16_t qp_id,
+rte_cryptodev_queue_pair_detach_sym_session(uint8_t dev_id, uint16_t qp_id,
struct rte_cryptodev_sym_session *session);
/**