/*-
* BSD LICENSE
- *
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-/* BSD LICENSE
*
- * Copyright(c) 2013 6WIND.
+ * Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+ * Copyright 2013-2014 6WIND S.A.
+ * All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
- * * Neither the name of 6WIND S.A. nor the names of its
+ * * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
extern "C" {
#endif
+#include <stdio.h>
#include <stdlib.h>
#include <limits.h>
#include <errno.h>
#include <sys/queue.h>
#include <stdint.h>
#include <inttypes.h>
-#include <rte_interrupts.h>
-TAILQ_HEAD(pci_device_list, rte_pci_device); /**< PCI devices in D-linked Q. */
-TAILQ_HEAD(pci_driver_list, rte_pci_driver); /**< PCI drivers in D-linked Q. */
-
-extern struct pci_driver_list pci_driver_list; /**< Global list of PCI drivers. */
-extern struct pci_device_list pci_device_list; /**< Global list of PCI devices. */
+#include <rte_debug.h>
+#include <rte_interrupts.h>
+#include <rte_dev.h>
+#include <rte_bus.h>
/** Pathname of PCI devices directory. */
-#define SYSFS_PCI_DEVICES "/sys/bus/pci/devices"
+const char *pci_get_sysfs_path(void);
/** Formatting string for PCI device identifier: Ex: 0000:00:01.0 */
-#define PCI_PRI_FMT "%.4"PRIx16":%.2"PRIx8":%.2"PRIx8".%"PRIx8
+#define PCI_PRI_FMT "%.4" PRIx16 ":%.2" PRIx8 ":%.2" PRIx8 ".%" PRIx8
+#define PCI_PRI_STR_SIZE sizeof("XXXXXXXX:XX:XX.X")
/** Short formatting string, without domain, for PCI device: Ex: 00:01.0 */
-#define PCI_SHORT_PRI_FMT "%.2"PRIx8":%.2"PRIx8".%"PRIx8
+#define PCI_SHORT_PRI_FMT "%.2" PRIx8 ":%.2" PRIx8 ".%" PRIx8
/** Nb. of values in PCI device identifier format string. */
#define PCI_FMT_NVAL 4
/** Nb. of values in PCI resource format. */
#define PCI_RESOURCE_FMT_NVAL 3
-/**
- * A structure describing a PCI resource.
- */
-struct rte_pci_resource {
- uint64_t phys_addr; /**< Physical address, 0 if no resource. */
- uint64_t len; /**< Length of the resource. */
- void *addr; /**< Virtual address, NULL when not mapped. */
-};
-
/** Maximum number of PCI resources. */
-#define PCI_MAX_RESOURCE 7
+#define PCI_MAX_RESOURCE 6
+
+/** Name of PCI Bus */
+#define PCI_BUS_NAME "PCI"
+
+/* Forward declarations */
+struct rte_pci_device;
+struct rte_pci_driver;
+
+/** List of PCI devices */
+TAILQ_HEAD(rte_pci_device_list, rte_pci_device);
+/** List of PCI drivers */
+TAILQ_HEAD(rte_pci_driver_list, rte_pci_driver);
+
+/* PCI Bus iterators */
+#define FOREACH_DEVICE_ON_PCIBUS(p) \
+ TAILQ_FOREACH(p, &(rte_pci_bus.device_list), next)
+
+#define FOREACH_DRIVER_ON_PCIBUS(p) \
+ TAILQ_FOREACH(p, &(rte_pci_bus.driver_list), next)
/**
* A structure describing an ID for a PCI driver. Each driver provides a
* table of these IDs for each device that it supports.
*/
struct rte_pci_id {
+ uint32_t class_id; /**< Class ID (class, subclass, pi) or RTE_CLASS_ANY_ID. */
uint16_t vendor_id; /**< Vendor ID or PCI_ANY_ID. */
uint16_t device_id; /**< Device ID or PCI_ANY_ID. */
uint16_t subsystem_vendor_id; /**< Subsystem vendor ID or PCI_ANY_ID. */
* A structure describing the location of a PCI device.
*/
struct rte_pci_addr {
- uint16_t domain; /**< Device domain */
+ uint32_t domain; /**< Device domain */
uint8_t bus; /**< Device bus */
uint8_t devid; /**< Device ID */
uint8_t function; /**< Device function. */
};
+struct rte_devargs;
+
+enum rte_kernel_driver {
+ RTE_KDRV_UNKNOWN = 0,
+ RTE_KDRV_IGB_UIO,
+ RTE_KDRV_VFIO,
+ RTE_KDRV_UIO_GENERIC,
+ RTE_KDRV_NIC_UIO,
+ RTE_KDRV_NONE,
+};
+
/**
* A structure describing a PCI device.
*/
struct rte_pci_device {
TAILQ_ENTRY(rte_pci_device) next; /**< Next probed PCI device. */
+ struct rte_device device; /**< Inherit core device */
struct rte_pci_addr addr; /**< PCI location. */
struct rte_pci_id id; /**< PCI ID. */
- struct rte_pci_resource mem_resource[PCI_MAX_RESOURCE]; /**< PCI Memory Resource */
+ struct rte_mem_resource mem_resource[PCI_MAX_RESOURCE];
+ /**< PCI Memory Resource */
struct rte_intr_handle intr_handle; /**< Interrupt handle */
- const struct rte_pci_driver *driver; /**< Associated driver */
+ struct rte_pci_driver *driver; /**< Associated driver */
uint16_t max_vfs; /**< sriov enable if not zero */
- int numa_node; /**< NUMA node connection */
- unsigned int blacklisted:1; /**< Device is blacklisted */
+ enum rte_kernel_driver kdrv; /**< Kernel driver passthrough */
+ char name[PCI_PRI_STR_SIZE+1]; /**< PCI location (ASCII) */
};
+/**
+ * @internal
+ * Helper macro for drivers that need to convert to struct rte_pci_device.
+ */
+#define RTE_DEV_TO_PCI(ptr) container_of(ptr, struct rte_pci_device, device)
+
/** Any PCI device identifier (vendor, device, ...) */
#define PCI_ANY_ID (0xffff)
+#define RTE_CLASS_ANY_ID (0xffffff)
#ifdef __cplusplus
/** C++ macro used to help building up tables of device IDs */
#define RTE_PCI_DEVICE(vend, dev) \
+ RTE_CLASS_ANY_ID, \
(vend), \
(dev), \
PCI_ANY_ID, \
#else
/** Macro used to help building up tables of device IDs */
#define RTE_PCI_DEVICE(vend, dev) \
+ .class_id = RTE_CLASS_ANY_ID, \
.vendor_id = (vend), \
.device_id = (dev), \
.subsystem_vendor_id = PCI_ANY_ID, \
.subsystem_device_id = PCI_ANY_ID
#endif
-struct rte_pci_driver;
-
/**
* Initialisation function for the driver called during PCI probing.
*/
-typedef int (pci_devinit_t)(struct rte_pci_driver *, struct rte_pci_device *);
+typedef int (pci_probe_t)(struct rte_pci_driver *, struct rte_pci_device *);
+
+/**
+ * Uninitialisation function for the driver called during hotplugging.
+ */
+typedef int (pci_remove_t)(struct rte_pci_device *);
/**
* A structure describing a PCI driver.
*/
struct rte_pci_driver {
TAILQ_ENTRY(rte_pci_driver) next; /**< Next in list. */
- const char *name; /**< Driver name. */
- pci_devinit_t *devinit; /**< Device init. function. */
- struct rte_pci_id *id_table; /**< ID table, NULL terminated. */
+ struct rte_driver driver; /**< Inherit core driver. */
+ struct rte_pci_bus *bus; /**< PCI bus reference. */
+ pci_probe_t *probe; /**< Device Probe function. */
+ pci_remove_t *remove; /**< Device Remove function. */
+ const struct rte_pci_id *id_table; /**< ID table, NULL terminated. */
uint32_t drv_flags; /**< Flags contolling handling of device. */
};
-/** Device needs igb_uio kernel module */
-#define RTE_PCI_DRV_NEED_IGB_UIO 0x0001
-/** Device driver must be registered several times until failure */
-#define RTE_PCI_DRV_MULTIPLE 0x0002
-/** Device needs to be unbound even if no module is provided */
-#define RTE_PCI_DRV_FORCE_UNBIND 0x0004
+/**
+ * Structure describing the PCI bus
+ */
+struct rte_pci_bus {
+ struct rte_bus bus; /**< Inherit the generic class */
+ struct rte_pci_device_list device_list; /**< List of PCI devices */
+ struct rte_pci_driver_list driver_list; /**< List of PCI drivers */
+};
+
+/** Device needs PCI BAR mapping (done with either IGB_UIO or VFIO) */
+#define RTE_PCI_DRV_NEED_MAPPING 0x0001
+/** Device driver supports link state interrupt */
+#define RTE_PCI_DRV_INTR_LSC 0x0008
+/** Device driver supports device removal interrupt */
+#define RTE_PCI_DRV_INTR_RMV 0x0010
+/** Device driver needs to keep mapped resources if unsupported dev detected */
+#define RTE_PCI_DRV_KEEP_MAPPED_RES 0x0020
+
+/**
+ * A structure describing a PCI mapping.
+ */
+struct pci_map {
+ void *addr;
+ char *path;
+ uint64_t offset;
+ uint64_t size;
+ uint64_t phaddr;
+};
+
+/**
+ * A structure describing a mapped PCI resource.
+ * For multi-process we need to reproduce all PCI mappings in secondary
+ * processes, so save them in a tailq.
+ */
+struct mapped_pci_resource {
+ TAILQ_ENTRY(mapped_pci_resource) next;
+
+ struct rte_pci_addr pci_addr;
+ char path[PATH_MAX];
+ int nb_maps;
+ struct pci_map maps[PCI_MAX_RESOURCE];
+};
+
+/** mapped pci device list */
+TAILQ_HEAD(mapped_pci_res_list, mapped_pci_resource);
/**< Internal use only - Macro used by pci addr parsing functions **/
#define GET_PCIADDR_FIELD(in, fd, lim, dlm) \
errno = 0; \
val = strtoul((in), &end, 16); \
if (errno != 0 || end[0] != (dlm) || val > (lim)) \
- return (-EINVAL); \
+ return -EINVAL; \
(fd) = (typeof (fd))val; \
(in) = end + 1; \
} while(0)
* a domain prefix (i.e. domain returned is always 0)
*
* @param input
- * The input string to be parsed. Should have the format XX:XX.X
+ * The input string to be parsed. Should have the format XX:XX.X
* @param dev_addr
- * The PCI Bus-Device-Function address to be returned. Domain will always be
- * returned as 0
+ * The PCI Bus-Device-Function address to be returned. Domain will always be
+ * returned as 0
* @return
* 0 on success, negative on error.
*/
GET_PCIADDR_FIELD(input, dev_addr->bus, UINT8_MAX, ':');
GET_PCIADDR_FIELD(input, dev_addr->devid, UINT8_MAX, '.');
GET_PCIADDR_FIELD(input, dev_addr->function, UINT8_MAX, 0);
- return (0);
+ return 0;
}
/**
* a domain prefix.
*
* @param input
- * The input string to be parsed. Should have the format XXXX:XX:XX.X
+ * The input string to be parsed. Should have the format XXXX:XX:XX.X
* @param dev_addr
- * The PCI Bus-Device-Function address to be returned
+ * The PCI Bus-Device-Function address to be returned
* @return
* 0 on success, negative on error.
*/
GET_PCIADDR_FIELD(input, dev_addr->bus, UINT8_MAX, ':');
GET_PCIADDR_FIELD(input, dev_addr->devid, UINT8_MAX, '.');
GET_PCIADDR_FIELD(input, dev_addr->function, UINT8_MAX, 0);
- return (0);
+ return 0;
}
#undef GET_PCIADDR_FIELD
/**
- * Probe the PCI bus for registered drivers.
+ * Utility function to write a pci device name, this device name can later be
+ * used to retrieve the corresponding rte_pci_addr using eal_parse_pci_*
+ * BDF helpers.
+ *
+ * @param addr
+ * The PCI Bus-Device-Function address
+ * @param output
+ * The output buffer string
+ * @param size
+ * The output buffer size
+ */
+static inline void
+rte_pci_device_name(const struct rte_pci_addr *addr,
+ char *output, size_t size)
+{
+ RTE_VERIFY(size >= PCI_PRI_STR_SIZE);
+ RTE_VERIFY(snprintf(output, size, PCI_PRI_FMT,
+ addr->domain, addr->bus,
+ addr->devid, addr->function) >= 0);
+}
+
+/* Compare two PCI device addresses. */
+/**
+ * Utility function to compare two PCI device addresses.
+ *
+ * @param addr
+ * The PCI Bus-Device-Function address to compare
+ * @param addr2
+ * The PCI Bus-Device-Function address to compare
+ * @return
+ * 0 on equal PCI address.
+ * Positive on addr is greater than addr2.
+ * Negative on addr is less than addr2, or error.
+ */
+static inline int
+rte_eal_compare_pci_addr(const struct rte_pci_addr *addr,
+ const struct rte_pci_addr *addr2)
+{
+ uint64_t dev_addr, dev_addr2;
+
+ if ((addr == NULL) || (addr2 == NULL))
+ return -1;
+
+ dev_addr = ((uint64_t)addr->domain << 24) |
+ (addr->bus << 16) | (addr->devid << 8) | addr->function;
+ dev_addr2 = ((uint64_t)addr2->domain << 24) |
+ (addr2->bus << 16) | (addr2->devid << 8) | addr2->function;
+
+ if (dev_addr > dev_addr2)
+ return 1;
+ else if (dev_addr < dev_addr2)
+ return -1;
+ else
+ return 0;
+}
+
+/**
+ * Scan the content of the PCI bus, and the devices in the devices
+ * list
+ *
+ * @return
+ * 0 on success, negative on error
+ */
+int rte_pci_scan(void);
+
+/**
+ * Probe the PCI bus
+ *
+ * @return
+ * - 0 on success.
+ * - !0 on error.
+ */
+int
+rte_pci_probe(void);
+
+/**
+ * Map the PCI device resources in user space virtual memory address
+ *
+ * Note that driver should not call this function when flag
+ * RTE_PCI_DRV_NEED_MAPPING is set, as EAL will do that for
+ * you when it's on.
+ *
+ * @param dev
+ * A pointer to a rte_pci_device structure describing the device
+ * to use
+ *
+ * @return
+ * 0 on success, negative on error and positive if no driver
+ * is found for the device.
+ */
+int rte_pci_map_device(struct rte_pci_device *dev);
+
+/**
+ * Unmap this device
+ *
+ * @param dev
+ * A pointer to a rte_pci_device structure describing the device
+ * to use
+ */
+void rte_pci_unmap_device(struct rte_pci_device *dev);
+
+/**
+ * @internal
+ * Map a particular resource from a file.
+ *
+ * @param requested_addr
+ * The starting address for the new mapping range.
+ * @param fd
+ * The file descriptor.
+ * @param offset
+ * The offset for the mapping range.
+ * @param size
+ * The size for the mapping range.
+ * @param additional_flags
+ * The additional flags for the mapping range.
+ * @return
+ * - On success, the function returns a pointer to the mapped area.
+ * - On error, the value MAP_FAILED is returned.
+ */
+void *pci_map_resource(void *requested_addr, int fd, off_t offset,
+ size_t size, int additional_flags);
+
+/**
+ * @internal
+ * Unmap a particular resource.
+ *
+ * @param requested_addr
+ * The address for the unmapping range.
+ * @param size
+ * The size for the unmapping range.
+ */
+void pci_unmap_resource(void *requested_addr, size_t size);
+
+/**
+ * Probe the single PCI device.
+ *
+ * Scan the content of the PCI bus, and find the pci device specified by pci
+ * address, then call the probe() function for registered driver that has a
+ * matching entry in its id_table for discovered device.
+ *
+ * @param addr
+ * The PCI Bus-Device-Function address to probe.
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int rte_pci_probe_one(const struct rte_pci_addr *addr);
+
+/**
+ * Close the single PCI device.
*
- * Scan the content of the PCI bus, and call the probe() function for
- * all registered drivers that have a matching entry in its id_table
- * for discovered devices.
+ * Scan the content of the PCI bus, and find the pci device specified by pci
+ * address, then call the remove() function for registered driver that has a
+ * matching entry in its id_table for discovered device.
*
+ * @param addr
+ * The PCI Bus-Device-Function address to close.
* @return
* - 0 on success.
* - Negative on error.
*/
-int rte_eal_pci_probe(void);
+int rte_pci_detach(const struct rte_pci_addr *addr);
/**
* Dump the content of the PCI bus.
+ *
+ * @param f
+ * A pointer to a file for output
*/
-void rte_eal_pci_dump(void);
+void rte_pci_dump(FILE *f);
/**
* Register a PCI driver.
* A pointer to a rte_pci_driver structure describing the driver
* to be registered.
*/
-void rte_eal_pci_register(struct rte_pci_driver *driver);
+void rte_pci_register(struct rte_pci_driver *driver);
+
+/** Helper for PCI device registration from driver (eth, crypto) instance */
+#define RTE_PMD_REGISTER_PCI(nm, pci_drv) \
+RTE_INIT(pciinitfn_ ##nm); \
+static void pciinitfn_ ##nm(void) \
+{\
+ (pci_drv).driver.name = RTE_STR(nm);\
+ rte_pci_register(&pci_drv); \
+} \
+RTE_PMD_EXPORT_NAME(nm, __COUNTER__)
/**
* Unregister a PCI driver.
* A pointer to a rte_pci_driver structure describing the driver
* to be unregistered.
*/
-void rte_eal_pci_unregister(struct rte_pci_driver *driver);
+void rte_pci_unregister(struct rte_pci_driver *driver);
+
+/**
+ * Read PCI config space.
+ *
+ * @param device
+ * A pointer to a rte_pci_device structure describing the device
+ * to use
+ * @param buf
+ * A data buffer where the bytes should be read into
+ * @param len
+ * The length of the data buffer.
+ * @param offset
+ * The offset into PCI config space
+ */
+int rte_pci_read_config(const struct rte_pci_device *device,
+ void *buf, size_t len, off_t offset);
+
+/**
+ * Write PCI config space.
+ *
+ * @param device
+ * A pointer to a rte_pci_device structure describing the device
+ * to use
+ * @param buf
+ * A data buffer containing the bytes should be written
+ * @param len
+ * The length of the data buffer.
+ * @param offset
+ * The offset into PCI config space
+ */
+int rte_pci_write_config(const struct rte_pci_device *device,
+ const void *buf, size_t len, off_t offset);
+
+/**
+ * A structure used to access io resources for a pci device.
+ * rte_pci_ioport is arch, os, driver specific, and should not be used outside
+ * of pci ioport api.
+ */
+struct rte_pci_ioport {
+ struct rte_pci_device *dev;
+ uint64_t base;
+ uint64_t len; /* only filled for memory mapped ports */
+};
+
+/**
+ * Initialize a rte_pci_ioport object for a pci device io resource.
+ *
+ * This object is then used to gain access to those io resources (see below).
+ *
+ * @param dev
+ * A pointer to a rte_pci_device structure describing the device
+ * to use.
+ * @param bar
+ * Index of the io pci resource we want to access.
+ * @param p
+ * The rte_pci_ioport object to be initialized.
+ * @return
+ * 0 on success, negative on error.
+ */
+int rte_pci_ioport_map(struct rte_pci_device *dev, int bar,
+ struct rte_pci_ioport *p);
+
+/**
+ * Release any resources used in a rte_pci_ioport object.
+ *
+ * @param p
+ * The rte_pci_ioport object to be uninitialized.
+ * @return
+ * 0 on success, negative on error.
+ */
+int rte_pci_ioport_unmap(struct rte_pci_ioport *p);
+
+/**
+ * Read from a io pci resource.
+ *
+ * @param p
+ * The rte_pci_ioport object from which we want to read.
+ * @param data
+ * A data buffer where the bytes should be read into
+ * @param len
+ * The length of the data buffer.
+ * @param offset
+ * The offset into the pci io resource.
+ */
+void rte_pci_ioport_read(struct rte_pci_ioport *p,
+ void *data, size_t len, off_t offset);
+
+/**
+ * Write to a io pci resource.
+ *
+ * @param p
+ * The rte_pci_ioport object to which we want to write.
+ * @param data
+ * A data buffer where the bytes should be read into
+ * @param len
+ * The length of the data buffer.
+ * @param offset
+ * The offset into the pci io resource.
+ */
+void rte_pci_ioport_write(struct rte_pci_ioport *p,
+ const void *data, size_t len, off_t offset);
#ifdef __cplusplus
}