/*-
* BSD LICENSE
- *
- * Copyright(c) 2010-2013 Intel Corporation. All rights reserved.
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
* All rights reserved.
- *
+ *
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
- *
+ *
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
- *
+ *
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-#include <ctype.h>
-#include <stdio.h>
-#include <stdlib.h>
#include <string.h>
-#include <stdarg.h>
-#include <unistd.h>
-#include <inttypes.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <stdarg.h>
-#include <errno.h>
#include <dirent.h>
-#include <limits.h>
-#include <sys/queue.h>
-#include <sys/mman.h>
-#include <sys/ioctl.h>
-#include <rte_interrupts.h>
#include <rte_log.h>
+#include <rte_bus.h>
#include <rte_pci.h>
-#include <rte_common.h>
-#include <rte_launch.h>
-#include <rte_memory.h>
-#include <rte_memzone.h>
-#include <rte_tailq.h>
-#include <rte_eal.h>
#include <rte_eal_memconfig.h>
-#include <rte_per_lcore.h>
-#include <rte_lcore.h>
#include <rte_malloc.h>
-#include <rte_string_fns.h>
-#include <rte_debug.h>
+#include <rte_devargs.h>
+#include <rte_memcpy.h>
-#include "rte_pci_dev_ids.h"
#include "eal_filesystem.h"
#include "eal_private.h"
+#include "eal_pci_init.h"
/**
* @file
* PCI probing under linux
*
- * This code is used to simulate a PCI probe by parsing information in
- * sysfs. Moreover, when a registered driver matches a device, the
- * kernel driver currently using it is unloaded and replaced by
- * igb_uio module, which is a very minimal userland driver for Intel
- * network card, only providing access to PCI BAR to applications, and
- * enabling bus master.
- */
-
-struct uio_map {
- void *addr;
- uint64_t offset;
- uint64_t size;
- uint64_t phaddr;
-};
-
-/*
- * For multi-process we need to reproduce all PCI mappings in secondary
- * processes, so save them in a tailq.
- */
-struct uio_resource {
- TAILQ_ENTRY(uio_resource) next;
-
- struct rte_pci_addr pci_addr;
- char path[PATH_MAX];
- size_t nb_maps;
- struct uio_map maps[PCI_MAX_RESOURCE];
-};
-
-TAILQ_HEAD(uio_res_list, uio_resource);
-
-static struct uio_res_list *uio_res_list = NULL;
-static int pci_parse_sysfs_value(const char *filename, uint64_t *val);
-
-/* forward prototype of function called in pci_switch_module below */
-static int pci_uio_map_resource(struct rte_pci_device *dev);
-
-#ifdef RTE_EAL_UNBIND_PORTS
-#define PROC_MODULES "/proc/modules"
-
-#define IGB_UIO_NAME "igb_uio"
-
-#define UIO_DRV_PATH "/sys/bus/pci/drivers/%s"
-
-/* maximum time to wait that /dev/uioX appears */
-#define UIO_DEV_WAIT_TIMEOUT 3 /* seconds */
-
-/*
- * Check that a kernel module is loaded. Returns 0 on success, or if the
- * parameter is NULL, or -1 if the module is not loaded.
+ * This code is used to simulate a PCI probe by parsing information in sysfs.
+ * When a registered device matches a driver, it is then initialized with
+ * IGB_UIO driver (or doesn't initialize, if the device wasn't bound to it).
*/
-static int
-pci_uio_check_module(const char *module_name)
-{
- FILE *f;
- unsigned i;
- char buf[BUFSIZ];
-
- if (module_name == NULL)
- return 0;
-
- f = fopen(PROC_MODULES, "r");
- if (f == NULL) {
- RTE_LOG(ERR, EAL, "Cannot open "PROC_MODULES": %s\n",
- strerror(errno));
- return -1;
- }
-
- while(fgets(buf, sizeof(buf), f) != NULL) {
-
- for (i = 0; i < sizeof(buf) && buf[i] != '\0'; i++) {
- if (isspace(buf[i]))
- buf[i] = '\0';
- }
-
- if (strncmp(buf, module_name, sizeof(buf)) == 0) {
- fclose(f);
- return 0;
- }
- }
- fclose(f);
- return -1;
-}
-
-/* bind a PCI to the kernel module driver */
-static int
-pci_bind_device(struct rte_pci_device *dev, char dr_path[])
-{
- FILE *f;
- int n;
- char buf[BUFSIZ];
- char dev_bind[PATH_MAX];
- struct rte_pci_addr *loc = &dev->addr;
-
- n = rte_snprintf(dev_bind, sizeof(dev_bind), "%s/bind", dr_path);
- if ((n < 0) || (n >= (int)sizeof(buf))) {
- RTE_LOG(ERR, EAL, "Cannot rte_snprintf device bind path\n");
- return -1;
- }
- f = fopen(dev_bind, "w");
- if (f == NULL) {
- RTE_LOG(ERR, EAL, "Cannot open %s\n", dev_bind);
- return -1;
- }
- n = rte_snprintf(buf, sizeof(buf), PCI_PRI_FMT "\n",
- loc->domain, loc->bus, loc->devid, loc->function);
- if ((n < 0) || (n >= (int)sizeof(buf))) {
- RTE_LOG(ERR, EAL, "Cannot rte_snprintf PCI infos\n");
- fclose(f);
- return -1;
- }
- if (fwrite(buf, n, 1, f) == 0) {
- fclose(f);
- return -1;
- }
-
- fclose(f);
- return 0;
-}
+extern struct rte_pci_bus rte_pci_bus;
static int
-pci_uio_bind_device(struct rte_pci_device *dev, const char *module_name)
+pci_get_kernel_driver_by_path(const char *filename, char *dri_name)
{
- FILE *f;
- int n;
- char buf[BUFSIZ];
- char uio_newid[PATH_MAX];
- char uio_bind[PATH_MAX];
-
- n = rte_snprintf(uio_newid, sizeof(uio_newid), UIO_DRV_PATH "/new_id", module_name);
- if ((n < 0) || (n >= (int)sizeof(uio_newid))) {
- RTE_LOG(ERR, EAL, "Cannot rte_snprintf uio_newid name\n");
- return -1;
- }
-
- n = rte_snprintf(uio_bind, sizeof(uio_bind), UIO_DRV_PATH, module_name);
- if ((n < 0) || (n >= (int)sizeof(uio_bind))) {
- RTE_LOG(ERR, EAL, "Cannot rte_snprintf uio_bind name\n");
- return -1;
- }
+ int count;
+ char path[PATH_MAX];
+ char *name;
- n = rte_snprintf(buf, sizeof(buf), "%x %x\n",
- dev->id.vendor_id, dev->id.device_id);
- if ((n < 0) || (n >= (int)sizeof(buf))) {
- RTE_LOG(ERR, EAL, "Cannot rte_snprintf vendor_id/device_id\n");
+ if (!filename || !dri_name)
return -1;
- }
- f = fopen(uio_newid, "w");
- if (f == NULL) {
- RTE_LOG(ERR, EAL, "Cannot open %s\n", uio_newid);
- return -1;
- }
- if (fwrite(buf, n, 1, f) == 0) {
- fclose(f);
+ count = readlink(filename, path, PATH_MAX);
+ if (count >= PATH_MAX)
return -1;
- }
- fclose(f);
-
- pci_bind_device(dev, uio_bind);
- return 0;
-}
-/* unbind kernel driver for this device */
-static int
-pci_unbind_kernel_driver(struct rte_pci_device *dev)
-{
- int n;
- FILE *f;
- char filename[PATH_MAX];
- char buf[BUFSIZ];
- struct rte_pci_addr *loc = &dev->addr;
+ /* For device does not have a driver */
+ if (count < 0)
+ return 1;
- /* open /sys/bus/pci/devices/AAAA:BB:CC.D/driver */
- rte_snprintf(filename, sizeof(filename),
- SYSFS_PCI_DEVICES "/" PCI_PRI_FMT "/driver/unbind",
- loc->domain, loc->bus, loc->devid, loc->function);
+ path[count] = '\0';
- f = fopen(filename, "w");
- if (f == NULL) /* device was not bound */
+ name = strrchr(path, '/');
+ if (name) {
+ strncpy(dri_name, name + 1, strlen(name + 1) + 1);
return 0;
-
- n = rte_snprintf(buf, sizeof(buf), PCI_PRI_FMT "\n",
- loc->domain, loc->bus, loc->devid, loc->function);
- if ((n < 0) || (n >= (int)sizeof(buf))) {
- RTE_LOG(ERR, EAL, "%s(): rte_snprintf failed\n", __func__);
- goto error;
- }
- if (fwrite(buf, n, 1, f) == 0) {
- RTE_LOG(ERR, EAL, "%s(): could not write to %s\n", __func__,
- filename);
- goto error;
}
- fclose(f);
- return 0;
-
-error:
- fclose(f);
return -1;
}
-
-static int
-pci_switch_module(struct rte_pci_driver *dr, struct rte_pci_device *dev,
- int uio_status, const char *module_name)
+/* Map pci device */
+int
+rte_pci_map_device(struct rte_pci_device *dev)
{
- if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
- /* check that our driver is loaded */
- if (uio_status != 0 &&
- (uio_status = pci_uio_check_module(module_name)) != 0)
- rte_exit(EXIT_FAILURE, "The %s module is required by the "
- "%s driver\n", module_name, dr->name);
-
- /* unbind current driver, bind ours */
- if (pci_unbind_kernel_driver(dev) < 0)
- return -1;
- if (pci_uio_bind_device(dev, module_name) < 0)
- return -1;
+ int ret = -1;
+
+ /* try mapping the NIC resources using VFIO if it exists */
+ switch (dev->kdrv) {
+ case RTE_KDRV_VFIO:
+#ifdef VFIO_PRESENT
+ if (pci_vfio_is_enabled())
+ ret = pci_vfio_map_resource(dev);
+#endif
+ break;
+ case RTE_KDRV_IGB_UIO:
+ case RTE_KDRV_UIO_GENERIC:
+ if (rte_eal_using_phys_addrs()) {
+ /* map resources for devices that use uio */
+ ret = pci_uio_map_resource(dev);
+ }
+ break;
+ default:
+ RTE_LOG(DEBUG, EAL,
+ " Not managed by a supported kernel driver, skipped\n");
+ ret = 1;
+ break;
}
- /* map the NIC resources */
- if (pci_uio_map_resource(dev) < 0)
- return -1;
- return 0;
+ return ret;
}
-#endif /* ifdef EAL_UNBIND_PORTS */
-
-/* map a particular resource from a file */
-static void *
-pci_map_resource(struct rte_pci_device *dev, void *requested_addr,
- const char *devname, off_t offset, size_t size)
+/* Unmap pci device */
+void
+rte_pci_unmap_device(struct rte_pci_device *dev)
{
- int fd;
- void *mapaddr;
-
-#ifdef RTE_EAL_UNBIND_PORTS
- /*
- * open devname, and mmap it: it can take some time to
- * appear, so we wait some time before returning an error
- */
- unsigned n;
- fd = dev->intr_handle.fd;
- for (n = 0; n < UIO_DEV_WAIT_TIMEOUT*10 && fd < 0; n++) {
- errno = 0;
- if ((fd = open(devname, O_RDWR)) < 0 && errno != ENOENT)
- break;
- usleep(100000);
- }
-#else
- /*
- * open devname, to mmap it
- */
- fd = open(devname, O_RDWR);
+ /* try unmapping the NIC resources using VFIO if it exists */
+ switch (dev->kdrv) {
+ case RTE_KDRV_VFIO:
+#ifdef VFIO_PRESENT
+ if (pci_vfio_is_enabled())
+ pci_vfio_unmap_resource(dev);
#endif
- if (fd < 0) {
- RTE_LOG(ERR, EAL, "Cannot open %s: %s\n",
- devname, strerror(errno));
- goto fail;
- }
-
- /* Map the PCI memory resource of device */
- mapaddr = mmap(requested_addr, size, PROT_READ | PROT_WRITE,
- MAP_SHARED, fd, offset);
- if (mapaddr == MAP_FAILED ||
- (requested_addr != NULL && mapaddr != requested_addr)) {
- RTE_LOG(ERR, EAL, "%s(): cannot mmap(%s(%d), %p, 0x%lx, 0x%lx):"
- " %s (%p)\n", __func__, devname, fd, requested_addr,
- (unsigned long)size, (unsigned long)offset,
- strerror(errno), mapaddr);
- close(fd);
- goto fail;
+ break;
+ case RTE_KDRV_IGB_UIO:
+ case RTE_KDRV_UIO_GENERIC:
+ /* unmap resources for devices that use uio */
+ pci_uio_unmap_resource(dev);
+ break;
+ default:
+ RTE_LOG(DEBUG, EAL,
+ " Not managed by a supported kernel driver, skipped\n");
+ break;
}
- if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
- /* save fd if in primary process */
- dev->intr_handle.fd = fd;
- dev->intr_handle.type = RTE_INTR_HANDLE_UIO;
- } else {
- /* fd is not needed in slave process, close it */
- dev->intr_handle.fd = -1;
- dev->intr_handle.type = RTE_INTR_HANDLE_UNKNOWN;
- close(fd);
- }
-
- RTE_LOG(DEBUG, EAL, " PCI memory mapped at %p\n", mapaddr);
-
- return mapaddr;
-
-fail:
- dev->intr_handle.fd = -1;
- dev->intr_handle.type = RTE_INTR_HANDLE_UNKNOWN;
-
- return NULL;
}
-#define OFF_MAX ((uint64_t)(off_t)-1)
-static ssize_t
-pci_uio_get_mappings(const char *devname, struct uio_map maps[], size_t nb_maps)
+void *
+pci_find_max_end_va(void)
{
- size_t i;
- char dirname[PATH_MAX];
- char filename[PATH_MAX];
- uint64_t offset, size;
-
- for (i = 0; i != nb_maps; i++) {
-
- /* check if map directory exists */
- rte_snprintf(dirname, sizeof(dirname),
- "%s/maps/map%u", devname, i);
-
- if (access(dirname, F_OK) != 0)
+ const struct rte_memseg *seg = rte_eal_get_physmem_layout();
+ const struct rte_memseg *last = seg;
+ unsigned i = 0;
+
+ for (i = 0; i < RTE_MAX_MEMSEG; i++, seg++) {
+ if (seg->addr == NULL)
break;
-
- /* get mapping offset */
- rte_snprintf(filename, sizeof(filename),
- "%s/offset", dirname);
- if (pci_parse_sysfs_value(filename, &offset) < 0) {
- RTE_LOG(ERR, EAL,
- "%s(): cannot parse offset of %s\n",
- __func__, dirname);
- return (-1);
- }
-
- /* get mapping size */
- rte_snprintf(filename, sizeof(filename),
- "%s/size", dirname);
- if (pci_parse_sysfs_value(filename, &size) < 0) {
- RTE_LOG(ERR, EAL,
- "%s(): cannot parse size of %s\n",
- __func__, dirname);
- return (-1);
- }
-
- /* get mapping physical address */
- rte_snprintf(filename, sizeof(filename),
- "%s/addr", dirname);
- if (pci_parse_sysfs_value(filename, &maps[i].phaddr) < 0) {
- RTE_LOG(ERR, EAL,
- "%s(): cannot parse addr of %s\n",
- __func__, dirname);
- return (-1);
- }
- if ((offset > OFF_MAX) || (size > SIZE_MAX)) {
- RTE_LOG(ERR, EAL,
- "%s(): offset/size exceed system max value\n",
- __func__);
- return (-1);
- }
+ if (seg->addr > last->addr)
+ last = seg;
- maps[i].offset = offset;
- maps[i].size = size;
- }
- return (i);
-}
-
-static int
-pci_uio_map_secondary(struct rte_pci_device *dev)
-{
- size_t i;
- struct uio_resource *uio_res;
-
- TAILQ_FOREACH(uio_res, uio_res_list, next) {
-
- /* skip this element if it doesn't match our PCI address */
- if (memcmp(&uio_res->pci_addr, &dev->addr, sizeof(dev->addr)))
- continue;
-
- for (i = 0; i != uio_res->nb_maps; i++) {
- if (pci_map_resource(dev, uio_res->maps[i].addr,
- uio_res->path,
- (off_t)uio_res->maps[i].offset,
- (size_t)uio_res->maps[i].size) !=
- uio_res->maps[i].addr) {
- RTE_LOG(ERR, EAL,
- "Cannot mmap device resource\n");
- return (-1);
- }
- }
- return (0);
}
-
- RTE_LOG(ERR, EAL, "Cannot find resource for device\n");
- return -1;
+ return RTE_PTR_ADD(last->addr, last->len);
}
-/* map the PCI resource of a PCI device in virtual memory */
-static int
-pci_uio_map_resource(struct rte_pci_device *dev)
+/* parse one line of the "resource" sysfs file (note that the 'line'
+ * string is modified)
+ */
+int
+pci_parse_one_sysfs_resource(char *line, size_t len, uint64_t *phys_addr,
+ uint64_t *end_addr, uint64_t *flags)
{
- int i, j;
- struct dirent *e;
- DIR *dir;
- char dirname[PATH_MAX];
- char filename[PATH_MAX];
- char dirname2[PATH_MAX];
- char devname[PATH_MAX]; /* contains the /dev/uioX */
- void *mapaddr;
- unsigned uio_num;
- unsigned long start,size;
- uint64_t phaddr;
- uint64_t offset;
- uint64_t pagesz;
- ssize_t nb_maps;
- struct rte_pci_addr *loc = &dev->addr;
- struct uio_resource *uio_res;
- struct uio_map *maps;
-
- dev->intr_handle.fd = -1;
-
- /* secondary processes - use already recorded details */
- if ((rte_eal_process_type() != RTE_PROC_PRIMARY) &&
- (dev->id.vendor_id != PCI_VENDOR_ID_QUMRANET))
- return (pci_uio_map_secondary(dev));
-
- /* depending on kernel version, uio can be located in uio/uioX
- * or uio:uioX */
-
- rte_snprintf(dirname, sizeof(dirname),
- "/sys/bus/pci/devices/" PCI_PRI_FMT "/uio",
- loc->domain, loc->bus, loc->devid, loc->function);
-
- dir = opendir(dirname);
- if (dir == NULL) {
- /* retry with the parent directory */
- rte_snprintf(dirname, sizeof(dirname),
- "/sys/bus/pci/devices/" PCI_PRI_FMT,
- loc->domain, loc->bus, loc->devid, loc->function);
- dir = opendir(dirname);
-
- if (dir == NULL) {
- RTE_LOG(ERR, EAL, "Cannot opendir %s\n", dirname);
- return -1;
- }
- }
-
- /* take the first file starting with "uio" */
- while ((e = readdir(dir)) != NULL) {
- /* format could be uio%d ...*/
- int shortprefix_len = sizeof("uio") - 1;
- /* ... or uio:uio%d */
- int longprefix_len = sizeof("uio:uio") - 1;
- char *endptr;
-
- if (strncmp(e->d_name, "uio", 3) != 0)
- continue;
-
- /* first try uio%d */
- errno = 0;
- uio_num = strtoull(e->d_name + shortprefix_len, &endptr, 10);
- if (errno == 0 && endptr != e->d_name) {
- rte_snprintf(dirname2, sizeof(dirname2),
- "%s/uio%u", dirname, uio_num);
- break;
- }
-
- /* then try uio:uio%d */
- errno = 0;
- uio_num = strtoull(e->d_name + longprefix_len, &endptr, 10);
- if (errno == 0 && endptr != e->d_name) {
- rte_snprintf(dirname2, sizeof(dirname2),
- "%s/uio:uio%u", dirname, uio_num);
- break;
- }
- }
- closedir(dir);
+ union pci_resource_info {
+ struct {
+ char *phys_addr;
+ char *end_addr;
+ char *flags;
+ };
+ char *ptrs[PCI_RESOURCE_FMT_NVAL];
+ } res_info;
- /* No uio resource found */
- if (e == NULL) {
- RTE_LOG(WARNING, EAL, " "PCI_PRI_FMT" not managed by UIO driver, "
- "skipping\n", loc->domain, loc->bus, loc->devid, loc->function);
+ if (rte_strsplit(line, len, res_info.ptrs, 3, ' ') != 3) {
+ RTE_LOG(ERR, EAL,
+ "%s(): bad resource format\n", __func__);
return -1;
}
-
- if(dev->id.vendor_id == PCI_VENDOR_ID_QUMRANET) {
- /* get portio size */
- rte_snprintf(filename, sizeof(filename),
- "%s/portio/port0/size", dirname2);
- if (eal_parse_sysfs_value(filename, &size) < 0) {
- RTE_LOG(ERR, EAL, "%s(): cannot parse size\n",
- __func__);
- return -1;
- }
-
- /* get portio start */
- rte_snprintf(filename, sizeof(filename),
- "%s/portio/port0/start", dirname2);
- if (eal_parse_sysfs_value(filename, &start) < 0) {
- RTE_LOG(ERR, EAL, "%s(): cannot parse portio start\n",
- __func__);
- return -1;
- }
- dev->mem_resource[0].addr = (void *)(uintptr_t)start;
- dev->mem_resource[0].len = (uint64_t)size;
- RTE_LOG(DEBUG, EAL, "PCI Port IO found start=0x%lx with size=0x%lx\n", start, size);
- /* rte_virtio_pmd does not need any other bar even if available */
- return (0);
- }
-
- /* allocate the mapping details for secondary processes*/
- if ((uio_res = rte_zmalloc("UIO_RES", sizeof (*uio_res), 0)) == NULL) {
+ errno = 0;
+ *phys_addr = strtoull(res_info.phys_addr, NULL, 16);
+ *end_addr = strtoull(res_info.end_addr, NULL, 16);
+ *flags = strtoull(res_info.flags, NULL, 16);
+ if (errno != 0) {
RTE_LOG(ERR, EAL,
- "%s(): cannot store uio mmap details\n", __func__);
- return (-1);
- }
-
- rte_snprintf(devname, sizeof(devname), "/dev/uio%u", uio_num);
- rte_snprintf(uio_res->path, sizeof(uio_res->path), "%s", devname);
- memcpy(&uio_res->pci_addr, &dev->addr, sizeof(uio_res->pci_addr));
-
- /* collect info about device mappings */
- if ((nb_maps = pci_uio_get_mappings(dirname2, uio_res->maps,
- sizeof (uio_res->maps) / sizeof (uio_res->maps[0])))
- < 0)
- return (nb_maps);
-
- uio_res->nb_maps = nb_maps;
-
- /* Map all BARs */
- pagesz = sysconf(_SC_PAGESIZE);
-
- maps = uio_res->maps;
- for (i = 0; i != PCI_MAX_RESOURCE; i++) {
-
- /* skip empty BAR */
- if ((phaddr = dev->mem_resource[i].phys_addr) == 0)
- continue;
-
- for (j = 0; j != nb_maps && (phaddr != maps[j].phaddr ||
- dev->mem_resource[i].len != maps[j].size);
- j++)
- ;
-
- /* if matching map is found, then use it */
- if (j != nb_maps) {
- offset = j * pagesz;
- if (maps[j].addr != NULL ||
- (mapaddr = pci_map_resource(dev,
- NULL, devname, (off_t)offset,
- (size_t)maps[j].size)) == NULL) {
- return (-1);
- }
-
- maps[j].addr = mapaddr;
- maps[j].offset = offset;
- dev->mem_resource[i].addr = mapaddr;
- }
+ "%s(): bad resource format\n", __func__);
+ return -1;
}
- TAILQ_INSERT_TAIL(uio_res_list, uio_res, next);
-
- return (0);
+ return 0;
}
/* parse the "resource" sysfs file */
-#define IORESOURCE_MEM 0x00000200
-
static int
pci_parse_sysfs_resource(const char *filename, struct rte_pci_device *dev)
{
FILE *f;
char buf[BUFSIZ];
- union pci_resource_info {
- struct {
- char *phys_addr;
- char *end_addr;
- char *flags;
- };
- char *ptrs[PCI_RESOURCE_FMT_NVAL];
- } res_info;
int i;
uint64_t phys_addr, end_addr, flags;
for (i = 0; i<PCI_MAX_RESOURCE; i++) {
if (fgets(buf, sizeof(buf), f) == NULL) {
- RTE_LOG(ERR, EAL,
+ RTE_LOG(ERR, EAL,
"%s(): cannot read resource\n", __func__);
goto error;
}
-
- if (rte_strsplit(buf, sizeof(buf), res_info.ptrs, 3, ' ') != 3) {
- RTE_LOG(ERR, EAL,
- "%s(): bad resource format\n", __func__);
- goto error;
- }
- errno = 0;
- phys_addr = strtoull(res_info.phys_addr, NULL, 16);
- end_addr = strtoull(res_info.end_addr, NULL, 16);
- flags = strtoull(res_info.flags, NULL, 16);
- if (errno != 0) {
- RTE_LOG(ERR, EAL,
- "%s(): bad resource format\n", __func__);
+ if (pci_parse_one_sysfs_resource(buf, sizeof(buf), &phys_addr,
+ &end_addr, &flags) < 0)
goto error;
- }
if (flags & IORESOURCE_MEM) {
dev->mem_resource[i].phys_addr = phys_addr;
dev->mem_resource[i].len = end_addr - phys_addr + 1;
/* not mapped for now */
- dev->mem_resource[i].addr = NULL;
+ dev->mem_resource[i].addr = NULL;
}
}
fclose(f);
return -1;
}
-/*
- * parse a sysfs file containing one integer value
- * different to the eal version, as it needs to work with 64-bit values
- */
-static int
-pci_parse_sysfs_value(const char *filename, uint64_t *val)
-{
- FILE *f;
- char buf[BUFSIZ];
- char *end = NULL;
-
- f = fopen(filename, "r");
- if (f == NULL) {
- RTE_LOG(ERR, EAL, "%s(): cannot open sysfs value %s\n",
- __func__, filename);
- return -1;
- }
-
- if (fgets(buf, sizeof(buf), f) == NULL) {
- RTE_LOG(ERR, EAL, "%s(): cannot read sysfs value %s\n",
- __func__, filename);
- fclose(f);
- return -1;
- }
- *val = strtoull(buf, &end, 0);
- if ((buf[0] == '\0') || (end == NULL) || (*end != '\n')) {
- RTE_LOG(ERR, EAL, "%s(): cannot parse sysfs value %s\n",
- __func__, filename);
- fclose(f);
- return -1;
- }
- fclose(f);
- return 0;
-}
-
-/* Compare two PCI device addresses. */
-static int
-pci_addr_comparison(struct rte_pci_addr *addr, struct rte_pci_addr *addr2)
-{
- uint64_t dev_addr = (addr->domain << 24) + (addr->bus << 16) + (addr->devid << 8) + addr->function;
- uint64_t dev_addr2 = (addr2->domain << 24) + (addr2->bus << 16) + (addr2->devid << 8) + addr2->function;
-
- if (dev_addr > dev_addr2)
- return 1;
- else
- return 0;
-}
-
-
/* Scan one pci sysfs entry, and fill the devices list from it. */
static int
-pci_scan_one(const char *dirname, uint16_t domain, uint8_t bus,
- uint8_t devid, uint8_t function)
+pci_scan_one(const char *dirname, const struct rte_pci_addr *addr)
{
char filename[PATH_MAX];
unsigned long tmp;
struct rte_pci_device *dev;
+ char driver[PATH_MAX];
+ int ret;
dev = malloc(sizeof(*dev));
- if (dev == NULL) {
+ if (dev == NULL)
return -1;
- }
memset(dev, 0, sizeof(*dev));
- dev->addr.domain = domain;
- dev->addr.bus = bus;
- dev->addr.devid = devid;
- dev->addr.function = function;
+ dev->addr = *addr;
/* get vendor id */
- rte_snprintf(filename, sizeof(filename), "%s/vendor", dirname);
+ snprintf(filename, sizeof(filename), "%s/vendor", dirname);
if (eal_parse_sysfs_value(filename, &tmp) < 0) {
free(dev);
return -1;
dev->id.vendor_id = (uint16_t)tmp;
/* get device id */
- rte_snprintf(filename, sizeof(filename), "%s/device", dirname);
+ snprintf(filename, sizeof(filename), "%s/device", dirname);
if (eal_parse_sysfs_value(filename, &tmp) < 0) {
free(dev);
return -1;
dev->id.device_id = (uint16_t)tmp;
/* get subsystem_vendor id */
- rte_snprintf(filename, sizeof(filename), "%s/subsystem_vendor",
+ snprintf(filename, sizeof(filename), "%s/subsystem_vendor",
dirname);
if (eal_parse_sysfs_value(filename, &tmp) < 0) {
free(dev);
dev->id.subsystem_vendor_id = (uint16_t)tmp;
/* get subsystem_device id */
- rte_snprintf(filename, sizeof(filename), "%s/subsystem_device",
+ snprintf(filename, sizeof(filename), "%s/subsystem_device",
dirname);
if (eal_parse_sysfs_value(filename, &tmp) < 0) {
free(dev);
}
dev->id.subsystem_device_id = (uint16_t)tmp;
+ /* get class_id */
+ snprintf(filename, sizeof(filename), "%s/class",
+ dirname);
+ if (eal_parse_sysfs_value(filename, &tmp) < 0) {
+ free(dev);
+ return -1;
+ }
+ /* the least 24 bits are valid: class, subclass, program interface */
+ dev->id.class_id = (uint32_t)tmp & RTE_CLASS_ANY_ID;
+
/* get max_vfs */
dev->max_vfs = 0;
- rte_snprintf(filename, sizeof(filename), "%s/max_vfs", dirname);
- if (!access(filename, F_OK) &&
- eal_parse_sysfs_value(filename, &tmp) == 0) {
+ snprintf(filename, sizeof(filename), "%s/max_vfs", dirname);
+ if (!access(filename, F_OK) &&
+ eal_parse_sysfs_value(filename, &tmp) == 0)
dev->max_vfs = (uint16_t)tmp;
+ else {
+ /* for non igb_uio driver, need kernel version >= 3.8 */
+ snprintf(filename, sizeof(filename),
+ "%s/sriov_numvfs", dirname);
+ if (!access(filename, F_OK) &&
+ eal_parse_sysfs_value(filename, &tmp) == 0)
+ dev->max_vfs = (uint16_t)tmp;
}
- /* get numa node */
- rte_snprintf(filename, sizeof(filename), "%s/numa_node",
+ /* get numa node, default to 0 if not present */
+ snprintf(filename, sizeof(filename), "%s/numa_node",
dirname);
- if (access(filename, R_OK) != 0) {
- /* if no NUMA support just set node to 0 */
- dev->numa_node = -1;
+
+ if (access(filename, F_OK) != -1) {
+ if (eal_parse_sysfs_value(filename, &tmp) == 0)
+ dev->device.numa_node = tmp;
+ else
+ dev->device.numa_node = -1;
} else {
- if (eal_parse_sysfs_value(filename, &tmp) < 0) {
- free(dev);
- return -1;
- }
- dev->numa_node = tmp;
+ dev->device.numa_node = 0;
}
+ pci_name_set(dev);
+
/* parse resources */
- rte_snprintf(filename, sizeof(filename), "%s/resource", dirname);
+ snprintf(filename, sizeof(filename), "%s/resource", dirname);
if (pci_parse_sysfs_resource(filename, dev) < 0) {
RTE_LOG(ERR, EAL, "%s(): cannot parse resource\n", __func__);
free(dev);
return -1;
}
+ /* parse driver */
+ snprintf(filename, sizeof(filename), "%s/driver", dirname);
+ ret = pci_get_kernel_driver_by_path(filename, driver);
+ if (ret < 0) {
+ RTE_LOG(ERR, EAL, "Fail to get kernel driver\n");
+ free(dev);
+ return -1;
+ }
+
+ if (!ret) {
+ if (!strcmp(driver, "vfio-pci"))
+ dev->kdrv = RTE_KDRV_VFIO;
+ else if (!strcmp(driver, "igb_uio"))
+ dev->kdrv = RTE_KDRV_IGB_UIO;
+ else if (!strcmp(driver, "uio_pci_generic"))
+ dev->kdrv = RTE_KDRV_UIO_GENERIC;
+ else
+ dev->kdrv = RTE_KDRV_UNKNOWN;
+ } else
+ dev->kdrv = RTE_KDRV_NONE;
+
/* device is valid, add in list (sorted) */
- if (TAILQ_EMPTY(&device_list)) {
- TAILQ_INSERT_TAIL(&device_list, dev, next);
- }
- else {
- struct rte_pci_device *dev2 = NULL;
+ if (TAILQ_EMPTY(&rte_pci_bus.device_list)) {
+ rte_pci_add_device(dev);
+ } else {
+ struct rte_pci_device *dev2;
+ int ret;
- TAILQ_FOREACH(dev2, &device_list, next) {
- if (pci_addr_comparison(&dev->addr, &dev2->addr))
+ TAILQ_FOREACH(dev2, &rte_pci_bus.device_list, next) {
+ ret = rte_eal_compare_pci_addr(&dev->addr, &dev2->addr);
+ if (ret > 0)
continue;
- else {
- TAILQ_INSERT_BEFORE(dev2, dev, next);
- return 0;
+
+ if (ret < 0) {
+ rte_pci_insert_device(dev2, dev);
+ } else { /* already registered */
+ dev2->kdrv = dev->kdrv;
+ dev2->max_vfs = dev->max_vfs;
+ pci_name_set(dev2);
+ memmove(dev2->mem_resource, dev->mem_resource,
+ sizeof(dev->mem_resource));
+ free(dev);
}
+ return 0;
}
- TAILQ_INSERT_TAIL(&device_list, dev, next);
+
+ rte_pci_add_device(dev);
}
-
+
return 0;
}
+int
+pci_update_device(const struct rte_pci_addr *addr)
+{
+ char filename[PATH_MAX];
+
+ snprintf(filename, sizeof(filename), "%s/" PCI_PRI_FMT,
+ pci_get_sysfs_path(), addr->domain, addr->bus, addr->devid,
+ addr->function);
+
+ return pci_scan_one(filename, addr);
+}
+
/*
* split up a pci address into its constituent parts.
*/
static int
-parse_pci_addr_format(const char *buf, int bufsize, uint16_t *domain,
- uint8_t *bus, uint8_t *devid, uint8_t *function)
+parse_pci_addr_format(const char *buf, int bufsize, struct rte_pci_addr *addr)
{
/* first split on ':' */
union splitaddr {
/* now convert to int values */
errno = 0;
- *domain = (uint16_t)strtoul(splitaddr.domain, NULL, 16);
- *bus = (uint8_t)strtoul(splitaddr.bus, NULL, 16);
- *devid = (uint8_t)strtoul(splitaddr.devid, NULL, 16);
- *function = (uint8_t)strtoul(splitaddr.function, NULL, 10);
+ addr->domain = strtoul(splitaddr.domain, NULL, 16);
+ addr->bus = strtoul(splitaddr.bus, NULL, 16);
+ addr->devid = strtoul(splitaddr.devid, NULL, 16);
+ addr->function = strtoul(splitaddr.function, NULL, 10);
if (errno != 0)
goto error;
* Scan the content of the PCI bus, and the devices in the devices
* list
*/
-static int
-pci_scan(void)
+int
+rte_pci_scan(void)
{
struct dirent *e;
DIR *dir;
char dirname[PATH_MAX];
- uint16_t domain;
- uint8_t bus, devid, function;
+ struct rte_pci_addr addr;
- dir = opendir(SYSFS_PCI_DEVICES);
+ /* for debug purposes, PCI can be disabled */
+ if (internal_config.no_pci)
+ return 0;
+
+ dir = opendir(pci_get_sysfs_path());
if (dir == NULL) {
RTE_LOG(ERR, EAL, "%s(): opendir failed: %s\n",
__func__, strerror(errno));
if (e->d_name[0] == '.')
continue;
- if (parse_pci_addr_format(e->d_name, sizeof(e->d_name), &domain,
- &bus, &devid, &function) != 0)
+ if (parse_pci_addr_format(e->d_name, sizeof(e->d_name), &addr) != 0)
continue;
- rte_snprintf(dirname, sizeof(dirname), "%s/%s", SYSFS_PCI_DEVICES,
- e->d_name);
- if (pci_scan_one(dirname, domain, bus, devid, function) < 0)
+ snprintf(dirname, sizeof(dirname), "%s/%s",
+ pci_get_sysfs_path(), e->d_name);
+
+ if (pci_scan_one(dirname, &addr) < 0)
goto error;
}
closedir(dir);
return -1;
}
-/*
- * If vendor/device ID match, call the devinit() function of the
- * driver.
- */
-int
-rte_eal_pci_probe_one_driver(struct rte_pci_driver *dr, struct rte_pci_device *dev)
+/* Read PCI config space. */
+int rte_pci_read_config(const struct rte_pci_device *device,
+ void *buf, size_t len, off_t offset)
{
- struct rte_pci_id *id_table;
-#ifdef RTE_EAL_UNBIND_PORTS
- const char *module_name = NULL;
- int uio_status = -1;
+ const struct rte_intr_handle *intr_handle = &device->intr_handle;
+
+ switch (intr_handle->type) {
+ case RTE_INTR_HANDLE_UIO:
+ case RTE_INTR_HANDLE_UIO_INTX:
+ return pci_uio_read_config(intr_handle, buf, len, offset);
+
+#ifdef VFIO_PRESENT
+ case RTE_INTR_HANDLE_VFIO_MSIX:
+ case RTE_INTR_HANDLE_VFIO_MSI:
+ case RTE_INTR_HANDLE_VFIO_LEGACY:
+ return pci_vfio_read_config(intr_handle, buf, len, offset);
+#endif
+ default:
+ RTE_LOG(ERR, EAL,
+ "Unknown handle type of fd %d\n",
+ intr_handle->fd);
+ return -1;
+ }
+}
- if (dr->drv_flags & RTE_PCI_DRV_NEED_IGB_UIO)
- module_name = IGB_UIO_NAME;
+/* Write PCI config space. */
+int rte_pci_write_config(const struct rte_pci_device *device,
+ const void *buf, size_t len, off_t offset)
+{
+ const struct rte_intr_handle *intr_handle = &device->intr_handle;
+
+ switch (intr_handle->type) {
+ case RTE_INTR_HANDLE_UIO:
+ case RTE_INTR_HANDLE_UIO_INTX:
+ return pci_uio_write_config(intr_handle, buf, len, offset);
+
+#ifdef VFIO_PRESENT
+ case RTE_INTR_HANDLE_VFIO_MSIX:
+ case RTE_INTR_HANDLE_VFIO_MSI:
+ case RTE_INTR_HANDLE_VFIO_LEGACY:
+ return pci_vfio_write_config(intr_handle, buf, len, offset);
#endif
+ default:
+ RTE_LOG(ERR, EAL,
+ "Unknown handle type of fd %d\n",
+ intr_handle->fd);
+ return -1;
+ }
+}
- for (id_table = dr->id_table ; id_table->vendor_id != 0; id_table++) {
+#if defined(RTE_ARCH_X86)
+static int
+pci_ioport_map(struct rte_pci_device *dev, int bar __rte_unused,
+ struct rte_pci_ioport *p)
+{
+ uint16_t start, end;
+ FILE *fp;
+ char *line = NULL;
+ char pci_id[16];
+ int found = 0;
+ size_t linesz;
+
+ snprintf(pci_id, sizeof(pci_id), PCI_PRI_FMT,
+ dev->addr.domain, dev->addr.bus,
+ dev->addr.devid, dev->addr.function);
+
+ fp = fopen("/proc/ioports", "r");
+ if (fp == NULL) {
+ RTE_LOG(ERR, EAL, "%s(): can't open ioports\n", __func__);
+ return -1;
+ }
- /* check if device's identifiers match the driver's ones */
- if (id_table->vendor_id != dev->id.vendor_id &&
- id_table->vendor_id != PCI_ANY_ID)
- continue;
- if (id_table->device_id != dev->id.device_id &&
- id_table->device_id != PCI_ANY_ID)
- continue;
- if (id_table->subsystem_vendor_id != dev->id.subsystem_vendor_id &&
- id_table->subsystem_vendor_id != PCI_ANY_ID)
- continue;
- if (id_table->subsystem_device_id != dev->id.subsystem_device_id &&
- id_table->subsystem_device_id != PCI_ANY_ID)
- continue;
+ while (getdelim(&line, &linesz, '\n', fp) > 0) {
+ char *ptr = line;
+ char *left;
+ int n;
- struct rte_pci_addr *loc = &dev->addr;
+ n = strcspn(ptr, ":");
+ ptr[n] = 0;
+ left = &ptr[n + 1];
- RTE_LOG(DEBUG, EAL, "PCI device "PCI_PRI_FMT" on NUMA socket %i\n",
- loc->domain, loc->bus, loc->devid, loc->function,
- dev->numa_node);
+ while (*left && isspace(*left))
+ left++;
- RTE_LOG(DEBUG, EAL, " probe driver: %x:%x %s\n", dev->id.vendor_id,
- dev->id.device_id, dr->name);
+ if (!strncmp(left, pci_id, strlen(pci_id))) {
+ found = 1;
- /* no initialization when blacklisted, return without error */
- if (dev->blacklisted) {
- RTE_LOG(DEBUG, EAL, " Device is blacklisted, not initializing\n");
- return 0;
+ while (*ptr && isspace(*ptr))
+ ptr++;
+
+ sscanf(ptr, "%04hx-%04hx", &start, &end);
+
+ break;
}
+ }
-#ifdef RTE_EAL_UNBIND_PORTS
- /* Unbind PCI devices if needed */
- if (module_name != NULL)
- if (pci_switch_module(dr, dev, uio_status, module_name) < 0)
- return -1;
+ free(line);
+ fclose(fp);
+
+ if (!found)
+ return -1;
+
+ dev->intr_handle.type = RTE_INTR_HANDLE_UNKNOWN;
+ p->base = start;
+ RTE_LOG(DEBUG, EAL, "PCI Port IO found start=0x%x\n", start);
+
+ return 0;
+}
+#endif
+
+int
+rte_pci_ioport_map(struct rte_pci_device *dev, int bar,
+ struct rte_pci_ioport *p)
+{
+ int ret = -1;
+
+ switch (dev->kdrv) {
+#ifdef VFIO_PRESENT
+ case RTE_KDRV_VFIO:
+ if (pci_vfio_is_enabled())
+ ret = pci_vfio_ioport_map(dev, bar, p);
+ break;
+#endif
+ case RTE_KDRV_IGB_UIO:
+ ret = pci_uio_ioport_map(dev, bar, p);
+ break;
+ case RTE_KDRV_UIO_GENERIC:
+#if defined(RTE_ARCH_X86)
+ ret = pci_ioport_map(dev, bar, p);
#else
- /* just map the NIC resources */
- if (pci_uio_map_resource(dev) < 0)
- return -1;
+ ret = pci_uio_ioport_map(dev, bar, p);
#endif
+ break;
+ case RTE_KDRV_NONE:
+#if defined(RTE_ARCH_X86)
+ ret = pci_ioport_map(dev, bar, p);
+#endif
+ break;
+ default:
+ break;
+ }
- /* We always should have BAR0 mapped */
- if (rte_eal_process_type() == RTE_PROC_PRIMARY &&
- dev->mem_resource[0].addr == NULL) {
- RTE_LOG(ERR, EAL,
- "%s(): BAR0 is not mapped\n",
- __func__);
- return (-1);
- }
-
- /* reference driver structure */
- dev->driver = dr;
+ if (!ret)
+ p->dev = dev;
- /* call the driver devinit() function */
- return dr->devinit(dr, dev);
- }
- /* return positive value if driver is not found */
- return 1;
+ return ret;
}
-/* Init the PCI EAL subsystem */
-int
-rte_eal_pci_init(void)
+void
+rte_pci_ioport_read(struct rte_pci_ioport *p,
+ void *data, size_t len, off_t offset)
{
- TAILQ_INIT(&driver_list);
- TAILQ_INIT(&device_list);
- uio_res_list = RTE_TAILQ_RESERVE_BY_IDX(RTE_TAILQ_PCI, uio_res_list);
+ switch (p->dev->kdrv) {
+#ifdef VFIO_PRESENT
+ case RTE_KDRV_VFIO:
+ pci_vfio_ioport_read(p, data, len, offset);
+ break;
+#endif
+ case RTE_KDRV_IGB_UIO:
+ pci_uio_ioport_read(p, data, len, offset);
+ break;
+ case RTE_KDRV_UIO_GENERIC:
+ pci_uio_ioport_read(p, data, len, offset);
+ break;
+ case RTE_KDRV_NONE:
+#if defined(RTE_ARCH_X86)
+ pci_uio_ioport_read(p, data, len, offset);
+#endif
+ break;
+ default:
+ break;
+ }
+}
- /* for debug purposes, PCI can be disabled */
- if (internal_config.no_pci)
- return 0;
+void
+rte_pci_ioport_write(struct rte_pci_ioport *p,
+ const void *data, size_t len, off_t offset)
+{
+ switch (p->dev->kdrv) {
+#ifdef VFIO_PRESENT
+ case RTE_KDRV_VFIO:
+ pci_vfio_ioport_write(p, data, len, offset);
+ break;
+#endif
+ case RTE_KDRV_IGB_UIO:
+ pci_uio_ioport_write(p, data, len, offset);
+ break;
+ case RTE_KDRV_UIO_GENERIC:
+ pci_uio_ioport_write(p, data, len, offset);
+ break;
+ case RTE_KDRV_NONE:
+#if defined(RTE_ARCH_X86)
+ pci_uio_ioport_write(p, data, len, offset);
+#endif
+ break;
+ default:
+ break;
+ }
+}
- if (pci_scan() < 0) {
- RTE_LOG(ERR, EAL, "%s(): Cannot scan PCI bus\n", __func__);
- return -1;
+int
+rte_pci_ioport_unmap(struct rte_pci_ioport *p)
+{
+ int ret = -1;
+
+ switch (p->dev->kdrv) {
+#ifdef VFIO_PRESENT
+ case RTE_KDRV_VFIO:
+ if (pci_vfio_is_enabled())
+ ret = pci_vfio_ioport_unmap(p);
+ break;
+#endif
+ case RTE_KDRV_IGB_UIO:
+ ret = pci_uio_ioport_unmap(p);
+ break;
+ case RTE_KDRV_UIO_GENERIC:
+#if defined(RTE_ARCH_X86)
+ ret = 0;
+#else
+ ret = pci_uio_ioport_unmap(p);
+#endif
+ break;
+ case RTE_KDRV_NONE:
+#if defined(RTE_ARCH_X86)
+ ret = 0;
+#endif
+ break;
+ default:
+ break;
}
- return 0;
+
+ return ret;
}