static const char *MZ_RTE_ETH_DEV_DATA = "rte_eth_dev_data";
struct rte_eth_dev rte_eth_devices[RTE_MAX_ETHPORTS];
-static uint16_t eth_dev_last_created_port;
/* spinlock for eth device callbacks */
static rte_spinlock_t rte_eth_dev_cb_lock = RTE_SPINLOCK_INITIALIZER;
eth_dev->data = &rte_eth_dev_shared_data->data[port_id];
- eth_dev_last_created_port = port_id;
-
return eth_dev;
}
{
uint16_t port_id;
struct rte_eth_dev *eth_dev = NULL;
+ size_t name_len;
+
+ name_len = strnlen(name, RTE_ETH_NAME_MAX_LEN);
+ if (name_len == 0) {
+ RTE_ETHDEV_LOG(ERR, "Zero length Ethernet device name\n");
+ return NULL;
+ }
+
+ if (name_len >= RTE_ETH_NAME_MAX_LEN) {
+ RTE_ETHDEV_LOG(ERR, "Ethernet device name is too long\n");
+ return NULL;
+ }
rte_eth_dev_shared_data_prepare();
}
eth_dev = eth_dev_get(port_id);
- snprintf(eth_dev->data->name, sizeof(eth_dev->data->name), "%s", name);
+ strlcpy(eth_dev->data->name, name, sizeof(eth_dev->data->name));
eth_dev->data->port_id = port_id;
eth_dev->data->mtu = ETHER_MTU;
{
struct rte_eth_dev *ethdev = &rte_eth_devices[port_id];
struct rte_eth_dev_owner *port_owner;
- int sret;
if (port_id >= RTE_MAX_ETHPORTS || !is_allocated(ethdev)) {
RTE_ETHDEV_LOG(ERR, "Port id %"PRIu16" is not allocated\n",
return -EPERM;
}
- sret = snprintf(port_owner->name, RTE_ETH_MAX_OWNER_NAME_LEN, "%s",
- new_owner->name);
- if (sret < 0 || sret >= RTE_ETH_MAX_OWNER_NAME_LEN)
- RTE_ETHDEV_LOG(ERR, "Port %u owner name was truncated\n",
- port_id);
+ /* can not truncate (same structure) */
+ strlcpy(port_owner->name, new_owner->name, RTE_ETH_MAX_OWNER_NAME_LEN);
port_owner->id = new_owner->id;
struct rte_eth_dev *dev;
struct rte_eth_dev_info dev_info;
struct rte_eth_conf orig_conf;
- struct rte_eth_conf local_conf = *dev_conf;
int diag;
int ret;
RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_infos_get, -ENOTSUP);
RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_configure, -ENOTSUP);
+ if (dev->data->dev_started) {
+ RTE_ETHDEV_LOG(ERR,
+ "Port %u must be stopped to allow configuration\n",
+ port_id);
+ return -EBUSY;
+ }
+
+ /* Store original config, as rollback required on failure */
+ memcpy(&orig_conf, &dev->data->dev_conf, sizeof(dev->data->dev_conf));
+
+ /*
+ * Copy the dev_conf parameter into the dev structure.
+ * rte_eth_dev_info_get() requires dev_conf, copy it before dev_info get
+ */
+ memcpy(&dev->data->dev_conf, dev_conf, sizeof(dev->data->dev_conf));
+
rte_eth_dev_info_get(port_id, &dev_info);
/* If number of queues specified by application for both Rx and Tx is
RTE_ETHDEV_LOG(ERR,
"Number of RX queues requested (%u) is greater than max supported(%d)\n",
nb_rx_q, RTE_MAX_QUEUES_PER_PORT);
- return -EINVAL;
+ ret = -EINVAL;
+ goto rollback;
}
if (nb_tx_q > RTE_MAX_QUEUES_PER_PORT) {
RTE_ETHDEV_LOG(ERR,
"Number of TX queues requested (%u) is greater than max supported(%d)\n",
nb_tx_q, RTE_MAX_QUEUES_PER_PORT);
- return -EINVAL;
- }
-
- if (dev->data->dev_started) {
- RTE_ETHDEV_LOG(ERR,
- "Port %u must be stopped to allow configuration\n",
- port_id);
- return -EBUSY;
+ ret = -EINVAL;
+ goto rollback;
}
- /* Store original config, as rollback required on failure */
- memcpy(&orig_conf, &dev->data->dev_conf, sizeof(dev->data->dev_conf));
-
- /* Copy the dev_conf parameter into the dev structure */
- memcpy(&dev->data->dev_conf, &local_conf, sizeof(dev->data->dev_conf));
-
/*
* Check that the numbers of RX and TX queues are not greater
* than the maximum number of RX and TX queues supported by the
* If jumbo frames are enabled, check that the maximum RX packet
* length is supported by the configured device.
*/
- if (local_conf.rxmode.offloads & DEV_RX_OFFLOAD_JUMBO_FRAME) {
+ if (dev_conf->rxmode.offloads & DEV_RX_OFFLOAD_JUMBO_FRAME) {
if (dev_conf->rxmode.max_rx_pkt_len > dev_info.max_rx_pktlen) {
RTE_ETHDEV_LOG(ERR,
"Ethdev port_id=%u max_rx_pkt_len %u > max valid value %u\n",
}
/* Any requested offloading must be within its device capabilities */
- if ((local_conf.rxmode.offloads & dev_info.rx_offload_capa) !=
- local_conf.rxmode.offloads) {
+ if ((dev_conf->rxmode.offloads & dev_info.rx_offload_capa) !=
+ dev_conf->rxmode.offloads) {
RTE_ETHDEV_LOG(ERR,
"Ethdev port_id=%u requested Rx offloads 0x%"PRIx64" doesn't match Rx offloads "
"capabilities 0x%"PRIx64" in %s()\n",
- port_id, local_conf.rxmode.offloads,
+ port_id, dev_conf->rxmode.offloads,
dev_info.rx_offload_capa,
__func__);
ret = -EINVAL;
goto rollback;
}
- if ((local_conf.txmode.offloads & dev_info.tx_offload_capa) !=
- local_conf.txmode.offloads) {
+ if ((dev_conf->txmode.offloads & dev_info.tx_offload_capa) !=
+ dev_conf->txmode.offloads) {
RTE_ETHDEV_LOG(ERR,
"Ethdev port_id=%u requested Tx offloads 0x%"PRIx64" doesn't match Tx offloads "
"capabilities 0x%"PRIx64" in %s()\n",
- port_id, local_conf.txmode.offloads,
+ port_id, dev_conf->txmode.offloads,
dev_info.tx_offload_capa,
__func__);
ret = -EINVAL;
nb_rx_desc % dev_info.rx_desc_lim.nb_align != 0) {
RTE_ETHDEV_LOG(ERR,
- "Invalid value for nb_rx_desc(=%hu), should be: <= %hu, = %hu, and a product of %hu\n",
+ "Invalid value for nb_rx_desc(=%hu), should be: <= %hu, >= %hu, and a product of %hu\n",
nb_rx_desc, dev_info.rx_desc_lim.nb_max,
dev_info.rx_desc_lim.nb_min,
dev_info.rx_desc_lim.nb_align);
nb_tx_desc < dev_info.tx_desc_lim.nb_min ||
nb_tx_desc % dev_info.tx_desc_lim.nb_align != 0) {
RTE_ETHDEV_LOG(ERR,
- "Invalid value for nb_tx_desc(=%hu), should be: <= %hu, = %hu, and a product of %hu\n",
+ "Invalid value for nb_tx_desc(=%hu), should be: <= %hu, >= %hu, and a product of %hu\n",
nb_tx_desc, dev_info.tx_desc_lim.nb_max,
dev_info.tx_desc_lim.nb_min,
dev_info.tx_desc_lim.nb_align);
uint16_t num_q;
for (idx = 0; idx < RTE_NB_STATS; idx++) {
- snprintf(xstats_names[cnt_used_entries].name,
- sizeof(xstats_names[0].name),
- "%s", rte_stats_strings[idx].name);
+ strlcpy(xstats_names[cnt_used_entries].name,
+ rte_stats_strings[idx].name,
+ sizeof(xstats_names[0].name));
cnt_used_entries++;
}
num_q = RTE_MIN(dev->data->nb_rx_queues, RTE_ETHDEV_QUEUE_STAT_CNTRS);
dev_info->rx_desc_lim = lim;
dev_info->tx_desc_lim = lim;
dev_info->device = dev->device;
+ dev_info->min_mtu = ETHER_MIN_MTU;
+ dev_info->max_mtu = UINT16_MAX;
RTE_FUNC_PTR_OR_RET(*dev->dev_ops->dev_infos_get);
(*dev->dev_ops->dev_infos_get)(dev, dev_info);
rte_eth_dev_set_mtu(uint16_t port_id, uint16_t mtu)
{
int ret;
+ struct rte_eth_dev_info dev_info;
struct rte_eth_dev *dev;
RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
dev = &rte_eth_devices[port_id];
RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->mtu_set, -ENOTSUP);
+ /*
+ * Check if the device supports dev_infos_get, if it does not
+ * skip min_mtu/max_mtu validation here as this requires values
+ * that are populated within the call to rte_eth_dev_info_get()
+ * which relies on dev->dev_ops->dev_infos_get.
+ */
+ if (*dev->dev_ops->dev_infos_get != NULL) {
+ rte_eth_dev_info_get(port_id, &dev_info);
+ if (mtu < dev_info.min_mtu || mtu > dev_info.max_mtu)
+ return -EINVAL;
+ }
+
ret = (*dev->dev_ops->mtu_set)(dev, mtu);
if (!ret)
dev->data->mtu = mtu;
{
char z_name[RTE_MEMZONE_NAMESIZE];
const struct rte_memzone *mz;
+ int rc;
- snprintf(z_name, sizeof(z_name), "eth_p%d_q%d_%s",
- dev->data->port_id, queue_id, ring_name);
+ rc = snprintf(z_name, sizeof(z_name), "eth_p%d_q%d_%s",
+ dev->data->port_id, queue_id, ring_name);
+ if (rc >= RTE_MEMZONE_NAMESIZE) {
+ RTE_ETHDEV_LOG(ERR, "ring name too long\n");
+ rte_errno = ENAMETOOLONG;
+ return NULL;
+ }
mz = rte_memzone_lookup(z_name);
if (mz)