-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * Copyright(c) 2016 6WIND S.A.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2014 Intel Corporation.
+ * Copyright(c) 2016 6WIND S.A.
*/
#ifndef _RTE_MEMPOOL_H_
#include <inttypes.h>
#include <sys/queue.h>
+#include <rte_config.h>
#include <rte_spinlock.h>
#include <rte_log.h>
#include <rte_debug.h>
#define MEMPOOL_F_SP_PUT 0x0004 /**< Default put is "single-producer".*/
#define MEMPOOL_F_SC_GET 0x0008 /**< Default get is "single-consumer".*/
#define MEMPOOL_F_POOL_CREATED 0x0010 /**< Internal: pool is created. */
-#define MEMPOOL_F_NO_PHYS_CONTIG 0x0020 /**< Don't need physically contiguous objs. */
+#define MEMPOOL_F_NO_IOVA_CONTIG 0x0020 /**< Don't need IOVA contiguous objs. */
+#define MEMPOOL_F_NO_PHYS_CONTIG MEMPOOL_F_NO_IOVA_CONTIG /* deprecated */
/**
* This capability flag is advertised by a mempool handler, if the whole
* memory area containing the objects must be physically contiguous.
* - MEMPOOL_F_SC_GET: If this flag is set, the default behavior
* when using rte_mempool_get() or rte_mempool_get_bulk() is
* "single-consumer". Otherwise, it is "multi-consumers".
- * - MEMPOOL_F_NO_PHYS_CONTIG: If set, allocated objects won't
- * necessarily be contiguous in physical memory.
+ * - MEMPOOL_F_NO_IOVA_CONTIG: If set, allocated objects won't
+ * necessarily be contiguous in IO memory.
* @return
* The pointer to the new allocated mempool, on success. NULL on error
* with rte_errno set appropriately. Possible rte_errno values include:
* Add a virtually and physically contiguous memory chunk in the pool
* where objects can be instantiated.
*
- * If the given physical address is unknown (paddr = RTE_BAD_PHYS_ADDR),
+ * If the given IO address is unknown (iova = RTE_BAD_IOVA),
* the chunk doesn't need to be physically contiguous (only virtually),
* and allocated objects may span two pages.
*
* A pointer to the mempool structure.
* @param vaddr
* The virtual address of memory that should be used to store objects.
- * @param paddr
- * The physical address
+ * @param iova
+ * The IO address
* @param len
* The length of memory in bytes.
* @param free_cb
* On error, the chunk is not added in the memory list of the
* mempool and a negative errno is returned.
*/
+int rte_mempool_populate_iova(struct rte_mempool *mp, char *vaddr,
+ rte_iova_t iova, size_t len, rte_mempool_memchunk_free_cb_t *free_cb,
+ void *opaque);
+
+__rte_deprecated
int rte_mempool_populate_phys(struct rte_mempool *mp, char *vaddr,
phys_addr_t paddr, size_t len, rte_mempool_memchunk_free_cb_t *free_cb,
void *opaque);
* Add physical memory for objects in the pool at init
*
* Add a virtually contiguous memory chunk in the pool where objects can
- * be instantiated. The physical addresses corresponding to the virtual
- * area are described in paddr[], pg_num, pg_shift.
+ * be instantiated. The IO addresses corresponding to the virtual
+ * area are described in iova[], pg_num, pg_shift.
*
* @param mp
* A pointer to the mempool structure.
* @param vaddr
* The virtual address of memory that should be used to store objects.
- * @param paddr
- * An array of physical addresses of each page composing the virtual
- * area.
+ * @param iova
+ * An array of IO addresses of each page composing the virtual area.
* @param pg_num
- * Number of elements in the paddr array.
+ * Number of elements in the iova array.
* @param pg_shift
* LOG2 of the physical pages size.
* @param free_cb
* On error, the chunks are not added in the memory list of the
* mempool and a negative errno is returned.
*/
+int rte_mempool_populate_iova_tab(struct rte_mempool *mp, char *vaddr,
+ const rte_iova_t iova[], uint32_t pg_num, uint32_t pg_shift,
+ rte_mempool_memchunk_free_cb_t *free_cb, void *opaque);
+
+__rte_deprecated
int rte_mempool_populate_phys_tab(struct rte_mempool *mp, char *vaddr,
const phys_addr_t paddr[], uint32_t pg_num, uint32_t pg_shift,
rte_mempool_memchunk_free_cb_t *free_cb, void *opaque);
}
/**
- * Return the physical address of elt, which is an element of the pool mp.
+ * Return the IO address of elt, which is an element of the pool mp.
*
- * @param mp
- * A pointer to the mempool structure.
* @param elt
* A pointer (virtual address) to the element of the pool.
* @return
- * The physical address of the elt element.
- * If the mempool was created with MEMPOOL_F_NO_PHYS_CONTIG, the
- * returned value is RTE_BAD_PHYS_ADDR.
+ * The IO address of the elt element.
+ * If the mempool was created with MEMPOOL_F_NO_IOVA_CONTIG, the
+ * returned value is RTE_BAD_IOVA.
*/
-static inline phys_addr_t
-rte_mempool_virt2phy(__rte_unused const struct rte_mempool *mp, const void *elt)
+static inline rte_iova_t
+rte_mempool_virt2iova(const void *elt)
{
const struct rte_mempool_objhdr *hdr;
hdr = (const struct rte_mempool_objhdr *)RTE_PTR_SUB(elt,
return hdr->iova;
}
+__rte_deprecated
+static inline phys_addr_t
+rte_mempool_virt2phy(__rte_unused const struct rte_mempool *mp, const void *elt)
+{
+ return rte_mempool_virt2iova(elt);
+}
+
/**
* Check the consistency of mempool objects.
*