/*-
* BSD LICENSE
- *
+ *
* Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
* All rights reserved.
- *
+ *
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
- *
+ *
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
- *
+ *
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* that won't work as rte_lcore_id() will not return a correct value.
*/
+#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <errno.h>
} __rte_cache_aligned;
#endif /* RTE_MEMPOOL_CACHE_MAX_SIZE > 0 */
+/**
+ * A structure that stores the size of mempool elements.
+ */
+struct rte_mempool_objsz {
+ uint32_t elt_size; /**< Size of an element. */
+ uint32_t header_size; /**< Size of header (before elt). */
+ uint32_t trailer_size; /**< Size of trailer (after elt). */
+ uint32_t total_size;
+ /**< Total size of an object (header + elt + trailer). */
+};
+
#define RTE_MEMPOOL_NAMESIZE 32 /**< Maximum length of a memory pool. */
+#define RTE_MEMPOOL_MZ_PREFIX "MP_"
+
+/* "MP_<name>" */
+#define RTE_MEMPOOL_MZ_FORMAT RTE_MEMPOOL_MZ_PREFIX "%s"
+
+#ifdef RTE_LIBRTE_XEN_DOM0
+
+/* "<name>_MP_elt" */
+#define RTE_MEMPOOL_OBJ_NAME "%s_" RTE_MEMPOOL_MZ_PREFIX "elt"
+
+#else
+
+#define RTE_MEMPOOL_OBJ_NAME RTE_MEMPOOL_MZ_FORMAT
+
+#endif /* RTE_LIBRTE_XEN_DOM0 */
+
+#define MEMPOOL_PG_SHIFT_MAX (sizeof(uintptr_t) * CHAR_BIT - 1)
+
+/** Mempool over one chunk of physically continuous memory */
+#define MEMPOOL_PG_NUM_DEFAULT 1
+
+#ifndef RTE_MEMPOOL_ALIGN
+#define RTE_MEMPOOL_ALIGN RTE_CACHE_LINE_SIZE
+#endif
+
+#define RTE_MEMPOOL_ALIGN_MASK (RTE_MEMPOOL_ALIGN - 1)
+
+/**
+ * Mempool object header structure
+ *
+ * Each object stored in mempools are prefixed by this header structure,
+ * it allows to retrieve the mempool pointer from the object. When debug
+ * is enabled, a cookie is also added in this structure preventing
+ * corruptions and double-frees.
+ */
+struct rte_mempool_objhdr {
+ struct rte_mempool *mp; /**< The mempool owning the object. */
+#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
+ uint64_t cookie; /**< Debug cookie. */
+#endif
+};
+
+/**
+ * Mempool object trailer structure
+ *
+ * In debug mode, each object stored in mempools are suffixed by this
+ * trailer structure containing a cookie preventing memory corruptions.
+ */
+struct rte_mempool_objtlr {
+#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
+ uint64_t cookie; /**< Debug cookie. */
+#endif
+};
/**
* The RTE mempool structure.
*/
struct rte_mempool {
- TAILQ_ENTRY(rte_mempool) next; /**< Next in list. */
-
char name[RTE_MEMPOOL_NAMESIZE]; /**< Name of mempool. */
struct rte_ring *ring; /**< Ring to store objects. */
phys_addr_t phys_addr; /**< Phys. addr. of mempool struct. */
int flags; /**< Flags of the mempool. */
uint32_t size; /**< Size of the mempool. */
uint32_t cache_size; /**< Size of per-lcore local cache. */
- uint32_t cache_flushthresh; /**< Threshold before we flush excess elements. */
+ uint32_t cache_flushthresh;
+ /**< Threshold before we flush excess elements. */
uint32_t elt_size; /**< Size of an element. */
uint32_t header_size; /**< Size of header (before elt). */
/** Per-lcore statistics. */
struct rte_mempool_debug_stats stats[RTE_MAX_LCORE];
#endif
+
+ /* Address translation support, starts from next cache line. */
+
+ /** Number of elements in the elt_pa array. */
+ uint32_t pg_num __rte_cache_aligned;
+ uint32_t pg_shift; /**< LOG2 of the physical pages. */
+ uintptr_t pg_mask; /**< physical page mask value. */
+ uintptr_t elt_va_start;
+ /**< Virtual address of the first mempool object. */
+ uintptr_t elt_va_end;
+ /**< Virtual address of the <size + 1> mempool object. */
+ phys_addr_t elt_pa[MEMPOOL_PG_NUM_DEFAULT];
+ /**< Array of physical page addresses for the mempool objects buffer. */
+
} __rte_cache_aligned;
#define MEMPOOL_F_NO_SPREAD 0x0001 /**< Do not spread in memory. */
/**
* @internal When debug is enabled, store some statistics.
+ *
* @param mp
* Pointer to the memory pool.
* @param name
* Number to add to the object-oriented statistics.
*/
#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
-#define __MEMPOOL_STAT_ADD(mp, name, n) do { \
- unsigned __lcore_id = rte_lcore_id(); \
- mp->stats[__lcore_id].name##_objs += n; \
- mp->stats[__lcore_id].name##_bulk += 1; \
+#define __MEMPOOL_STAT_ADD(mp, name, n) do { \
+ unsigned __lcore_id = rte_lcore_id(); \
+ if (__lcore_id < RTE_MAX_LCORE) { \
+ mp->stats[__lcore_id].name##_objs += n; \
+ mp->stats[__lcore_id].name##_bulk += 1; \
+ } \
} while(0)
#else
#define __MEMPOOL_STAT_ADD(mp, name, n) do {} while(0)
#endif
/**
- * @internal Get a pointer to a mempool pointer in the object header.
- * @param obj
- * Pointer to object.
- * @return
- * The pointer to the mempool from which the object was allocated.
+ * Calculate the size of the mempool header.
+ *
+ * @param mp
+ * Pointer to the memory pool.
+ * @param pgn
+ * Number of pages used to store mempool objects.
*/
-static inline struct rte_mempool **__mempool_from_obj(void *obj)
+#define MEMPOOL_HEADER_SIZE(mp, pgn) (sizeof(*(mp)) + \
+ RTE_ALIGN_CEIL(((pgn) - RTE_DIM((mp)->elt_pa)) * \
+ sizeof ((mp)->elt_pa[0]), RTE_CACHE_LINE_SIZE))
+
+/**
+ * Return true if the whole mempool is in contiguous memory.
+ */
+#define MEMPOOL_IS_CONTIG(mp) \
+ ((mp)->pg_num == MEMPOOL_PG_NUM_DEFAULT && \
+ (mp)->phys_addr == (mp)->elt_pa[0])
+
+/* return the header of a mempool object (internal) */
+static inline struct rte_mempool_objhdr *__mempool_get_header(void *obj)
{
- struct rte_mempool **mpp;
- unsigned off;
+ return RTE_PTR_SUB(obj, sizeof(struct rte_mempool_objhdr));
+}
- off = sizeof(struct rte_mempool *);
-#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
- off += sizeof(uint64_t);
-#endif
- mpp = (struct rte_mempool **)((char *)obj - off);
- return mpp;
+/* return the trailer of a mempool object (internal) */
+static inline struct rte_mempool_objtlr *__mempool_get_trailer(void *obj)
+{
+ return RTE_PTR_SUB(obj, sizeof(struct rte_mempool_objtlr));
}
/**
* @return
* A pointer to the mempool structure.
*/
-static inline const struct rte_mempool *rte_mempool_from_obj(void *obj)
-{
- struct rte_mempool * const *mpp;
- mpp = __mempool_from_obj(obj);
- return *mpp;
-}
-
-#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
-/* get header cookie value */
-static inline uint64_t __mempool_read_header_cookie(const void *obj)
-{
- return *(const uint64_t *)((const char *)obj - sizeof(uint64_t));
-}
-
-/* get trailer cookie value */
-static inline uint64_t __mempool_read_trailer_cookie(void *obj)
+static inline struct rte_mempool *rte_mempool_from_obj(void *obj)
{
- struct rte_mempool **mpp = __mempool_from_obj(obj);
- return *(uint64_t *)((char *)obj + (*mpp)->elt_size);
+ struct rte_mempool_objhdr *hdr = __mempool_get_header(obj);
+ return hdr->mp;
}
-/* write header cookie value */
-static inline void __mempool_write_header_cookie(void *obj, int free)
-{
- uint64_t *cookie_p;
- cookie_p = (uint64_t *)((char *)obj - sizeof(uint64_t));
- if (free == 0)
- *cookie_p = RTE_MEMPOOL_HEADER_COOKIE1;
- else
- *cookie_p = RTE_MEMPOOL_HEADER_COOKIE2;
-
-}
-
-/* write trailer cookie value */
-static inline void __mempool_write_trailer_cookie(void *obj)
-{
- uint64_t *cookie_p;
- struct rte_mempool **mpp = __mempool_from_obj(obj);
- cookie_p = (uint64_t *)((char *)obj + (*mpp)->elt_size);
- *cookie_p = RTE_MEMPOOL_TRAILER_COOKIE;
-}
-#endif /* RTE_LIBRTE_MEMPOOL_DEBUG */
-
/**
* @internal Check and update cookies or panic.
*
void * const *obj_table_const,
unsigned n, int free)
{
+ struct rte_mempool_objhdr *hdr;
+ struct rte_mempool_objtlr *tlr;
uint64_t cookie;
void *tmp;
void *obj;
rte_panic("MEMPOOL: object is owned by another "
"mempool\n");
- cookie = __mempool_read_header_cookie(obj);
+ hdr = __mempool_get_header(obj);
+ cookie = hdr->cookie;
if (free == 0) {
if (cookie != RTE_MEMPOOL_HEADER_COOKIE1) {
rte_log_set_history(0);
RTE_LOG(CRIT, MEMPOOL,
- "obj=%p, mempool=%p, cookie=%"PRIx64"\n",
- obj, mp, cookie);
+ "obj=%p, mempool=%p, cookie=%" PRIx64 "\n",
+ obj, (const void *) mp, cookie);
rte_panic("MEMPOOL: bad header cookie (put)\n");
}
- __mempool_write_header_cookie(obj, 1);
+ hdr->cookie = RTE_MEMPOOL_HEADER_COOKIE2;
}
else if (free == 1) {
if (cookie != RTE_MEMPOOL_HEADER_COOKIE2) {
rte_log_set_history(0);
RTE_LOG(CRIT, MEMPOOL,
- "obj=%p, mempool=%p, cookie=%"PRIx64"\n",
- obj, mp, cookie);
+ "obj=%p, mempool=%p, cookie=%" PRIx64 "\n",
+ obj, (const void *) mp, cookie);
rte_panic("MEMPOOL: bad header cookie (get)\n");
}
- __mempool_write_header_cookie(obj, 0);
+ hdr->cookie = RTE_MEMPOOL_HEADER_COOKIE1;
}
else if (free == 2) {
if (cookie != RTE_MEMPOOL_HEADER_COOKIE1 &&
cookie != RTE_MEMPOOL_HEADER_COOKIE2) {
rte_log_set_history(0);
RTE_LOG(CRIT, MEMPOOL,
- "obj=%p, mempool=%p, cookie=%"PRIx64"\n",
- obj, mp, cookie);
+ "obj=%p, mempool=%p, cookie=%" PRIx64 "\n",
+ obj, (const void *) mp, cookie);
rte_panic("MEMPOOL: bad header cookie (audit)\n");
}
}
- cookie = __mempool_read_trailer_cookie(obj);
+ tlr = __mempool_get_trailer(obj);
+ cookie = tlr->cookie;
if (cookie != RTE_MEMPOOL_TRAILER_COOKIE) {
rte_log_set_history(0);
RTE_LOG(CRIT, MEMPOOL,
- "obj=%p, mempool=%p, cookie=%"PRIx64"\n",
- obj, mp, cookie);
+ "obj=%p, mempool=%p, cookie=%" PRIx64 "\n",
+ obj, (const void *) mp, cookie);
rte_panic("MEMPOOL: bad trailer cookie\n");
}
}
#define __mempool_check_cookies(mp, obj_table_const, n, free) do {} while(0)
#endif /* RTE_LIBRTE_MEMPOOL_DEBUG */
+/**
+ * A mempool object iterator callback function.
+ */
+typedef void (*rte_mempool_obj_iter_t)(void * /*obj_iter_arg*/,
+ void * /*obj_start*/,
+ void * /*obj_end*/,
+ uint32_t /*obj_index */);
+
+/**
+ * Call a function for each mempool object in a memory chunk
+ *
+ * Iterate across objects of the given size and alignment in the
+ * provided chunk of memory. The given memory buffer can consist of
+ * disjointed physical pages.
+ *
+ * For each object, call the provided callback (if any). This function
+ * is used to populate a mempool, or walk through all the elements of a
+ * mempool, or estimate how many elements of the given size could be
+ * created in the given memory buffer.
+ *
+ * @param vaddr
+ * Virtual address of the memory buffer.
+ * @param elt_num
+ * Maximum number of objects to iterate through.
+ * @param elt_sz
+ * Size of each object.
+ * @param align
+ * Alignment of each object.
+ * @param paddr
+ * Array of physical addresses of the pages that comprises given memory
+ * buffer.
+ * @param pg_num
+ * Number of elements in the paddr array.
+ * @param pg_shift
+ * LOG2 of the physical pages size.
+ * @param obj_iter
+ * Object iterator callback function (could be NULL).
+ * @param obj_iter_arg
+ * User defined parameter for the object iterator callback function.
+ *
+ * @return
+ * Number of objects iterated through.
+ */
+uint32_t rte_mempool_obj_iter(void *vaddr,
+ uint32_t elt_num, size_t elt_sz, size_t align,
+ const phys_addr_t paddr[], uint32_t pg_num, uint32_t pg_shift,
+ rte_mempool_obj_iter_t obj_iter, void *obj_iter_arg);
+
/**
* An object constructor callback function for mempool.
*
typedef void (rte_mempool_ctor_t)(struct rte_mempool *, void *);
/**
- * Creates a new mempool named *name* in memory.
+ * Create a new mempool named *name* in memory.
*
* This function uses ``memzone_reserve()`` to allocate memory. The
* pool contains n elements of elt_size. Its size is set to n.
+ * All elements of the mempool are allocated together with the mempool header,
+ * in one physically continuous chunk of memory.
*
* @param name
* The name of the mempool.
* If cache_size is non-zero, the rte_mempool library will try to
* limit the accesses to the common lockless pool, by maintaining a
* per-lcore object cache. This argument must be lower or equal to
- * CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE. It is advised to choose
+ * CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE and n / 1.5. It is advised to choose
* cache_size to have "n modulo cache_size == 0": if this is
* not the case, some elements will always stay in the pool and will
* never be used. The access to the per-lcore table is of course
* faster than the multi-producer/consumer pool. The cache can be
* disabled if the cache_size argument is set to 0; it can be useful to
- * avoid loosing objects in cache. Note that even if not used, the
+ * avoid losing objects in cache. Note that even if not used, the
* memory space for cache is always reserved in a mempool structure,
* except if CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE is set to 0.
* @param private_data_size
* with rte_errno set appropriately. Possible rte_errno values include:
* - E_RTE_NO_CONFIG - function could not get pointer to rte_config structure
* - E_RTE_SECONDARY - function was called from a secondary process instance
- * - E_RTE_NO_TAILQ - no tailq list could be got for the ring or mempool list
* - EINVAL - cache size provided is too large
* - ENOSPC - the maximum number of memzones has already been allocated
* - EEXIST - a memzone with the same name already exists
rte_mempool_obj_ctor_t *obj_init, void *obj_init_arg,
int socket_id, unsigned flags);
+/**
+ * Create a new mempool named *name* in memory.
+ *
+ * This function uses ``memzone_reserve()`` to allocate memory. The
+ * pool contains n elements of elt_size. Its size is set to n.
+ * Depending on the input parameters, mempool elements can be either allocated
+ * together with the mempool header, or an externally provided memory buffer
+ * could be used to store mempool objects. In later case, that external
+ * memory buffer can consist of set of disjoint physical pages.
+ *
+ * @param name
+ * The name of the mempool.
+ * @param n
+ * The number of elements in the mempool. The optimum size (in terms of
+ * memory usage) for a mempool is when n is a power of two minus one:
+ * n = (2^q - 1).
+ * @param elt_size
+ * The size of each element.
+ * @param cache_size
+ * If cache_size is non-zero, the rte_mempool library will try to
+ * limit the accesses to the common lockless pool, by maintaining a
+ * per-lcore object cache. This argument must be lower or equal to
+ * CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE. It is advised to choose
+ * cache_size to have "n modulo cache_size == 0": if this is
+ * not the case, some elements will always stay in the pool and will
+ * never be used. The access to the per-lcore table is of course
+ * faster than the multi-producer/consumer pool. The cache can be
+ * disabled if the cache_size argument is set to 0; it can be useful to
+ * avoid losing objects in cache. Note that even if not used, the
+ * memory space for cache is always reserved in a mempool structure,
+ * except if CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE is set to 0.
+ * @param private_data_size
+ * The size of the private data appended after the mempool
+ * structure. This is useful for storing some private data after the
+ * mempool structure, as is done for rte_mbuf_pool for example.
+ * @param mp_init
+ * A function pointer that is called for initialization of the pool,
+ * before object initialization. The user can initialize the private
+ * data in this function if needed. This parameter can be NULL if
+ * not needed.
+ * @param mp_init_arg
+ * An opaque pointer to data that can be used in the mempool
+ * constructor function.
+ * @param obj_init
+ * A function pointer that is called for each object at
+ * initialization of the pool. The user can set some meta data in
+ * objects if needed. This parameter can be NULL if not needed.
+ * The obj_init() function takes the mempool pointer, the init_arg,
+ * the object pointer and the object number as parameters.
+ * @param obj_init_arg
+ * An opaque pointer to data that can be used as an argument for
+ * each call to the object constructor function.
+ * @param socket_id
+ * The *socket_id* argument is the socket identifier in the case of
+ * NUMA. The value can be *SOCKET_ID_ANY* if there is no NUMA
+ * constraint for the reserved zone.
+ * @param flags
+ * The *flags* arguments is an OR of following flags:
+ * - MEMPOOL_F_NO_SPREAD: By default, objects addresses are spread
+ * between channels in RAM: the pool allocator will add padding
+ * between objects depending on the hardware configuration. See
+ * Memory alignment constraints for details. If this flag is set,
+ * the allocator will just align them to a cache line.
+ * - MEMPOOL_F_NO_CACHE_ALIGN: By default, the returned objects are
+ * cache-aligned. This flag removes this constraint, and no
+ * padding will be present between objects. This flag implies
+ * MEMPOOL_F_NO_SPREAD.
+ * - MEMPOOL_F_SP_PUT: If this flag is set, the default behavior
+ * when using rte_mempool_put() or rte_mempool_put_bulk() is
+ * "single-producer". Otherwise, it is "multi-producers".
+ * - MEMPOOL_F_SC_GET: If this flag is set, the default behavior
+ * when using rte_mempool_get() or rte_mempool_get_bulk() is
+ * "single-consumer". Otherwise, it is "multi-consumers".
+ * @param vaddr
+ * Virtual address of the externally allocated memory buffer.
+ * Will be used to store mempool objects.
+ * @param paddr
+ * Array of physical addresses of the pages that comprises given memory
+ * buffer.
+ * @param pg_num
+ * Number of elements in the paddr array.
+ * @param pg_shift
+ * LOG2 of the physical pages size.
+ * @return
+ * The pointer to the new allocated mempool, on success. NULL on error
+ * with rte_errno set appropriately. Possible rte_errno values include:
+ * - E_RTE_NO_CONFIG - function could not get pointer to rte_config structure
+ * - E_RTE_SECONDARY - function was called from a secondary process instance
+ * - EINVAL - cache size provided is too large
+ * - ENOSPC - the maximum number of memzones has already been allocated
+ * - EEXIST - a memzone with the same name already exists
+ * - ENOMEM - no appropriate memory area found in which to create memzone
+ */
+struct rte_mempool *
+rte_mempool_xmem_create(const char *name, unsigned n, unsigned elt_size,
+ unsigned cache_size, unsigned private_data_size,
+ rte_mempool_ctor_t *mp_init, void *mp_init_arg,
+ rte_mempool_obj_ctor_t *obj_init, void *obj_init_arg,
+ int socket_id, unsigned flags, void *vaddr,
+ const phys_addr_t paddr[], uint32_t pg_num, uint32_t pg_shift);
+
+#ifdef RTE_LIBRTE_XEN_DOM0
+/**
+ * Create a new mempool named *name* in memory on Xen Dom0.
+ *
+ * This function uses ``rte_mempool_xmem_create()`` to allocate memory. The
+ * pool contains n elements of elt_size. Its size is set to n.
+ * All elements of the mempool are allocated together with the mempool header,
+ * and memory buffer can consist of set of disjoint physical pages.
+ *
+ * @param name
+ * The name of the mempool.
+ * @param n
+ * The number of elements in the mempool. The optimum size (in terms of
+ * memory usage) for a mempool is when n is a power of two minus one:
+ * n = (2^q - 1).
+ * @param elt_size
+ * The size of each element.
+ * @param cache_size
+ * If cache_size is non-zero, the rte_mempool library will try to
+ * limit the accesses to the common lockless pool, by maintaining a
+ * per-lcore object cache. This argument must be lower or equal to
+ * CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE. It is advised to choose
+ * cache_size to have "n modulo cache_size == 0": if this is
+ * not the case, some elements will always stay in the pool and will
+ * never be used. The access to the per-lcore table is of course
+ * faster than the multi-producer/consumer pool. The cache can be
+ * disabled if the cache_size argument is set to 0; it can be useful to
+ * avoid losing objects in cache. Note that even if not used, the
+ * memory space for cache is always reserved in a mempool structure,
+ * except if CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE is set to 0.
+ * @param private_data_size
+ * The size of the private data appended after the mempool
+ * structure. This is useful for storing some private data after the
+ * mempool structure, as is done for rte_mbuf_pool for example.
+ * @param mp_init
+ * A function pointer that is called for initialization of the pool,
+ * before object initialization. The user can initialize the private
+ * data in this function if needed. This parameter can be NULL if
+ * not needed.
+ * @param mp_init_arg
+ * An opaque pointer to data that can be used in the mempool
+ * constructor function.
+ * @param obj_init
+ * A function pointer that is called for each object at
+ * initialization of the pool. The user can set some meta data in
+ * objects if needed. This parameter can be NULL if not needed.
+ * The obj_init() function takes the mempool pointer, the init_arg,
+ * the object pointer and the object number as parameters.
+ * @param obj_init_arg
+ * An opaque pointer to data that can be used as an argument for
+ * each call to the object constructor function.
+ * @param socket_id
+ * The *socket_id* argument is the socket identifier in the case of
+ * NUMA. The value can be *SOCKET_ID_ANY* if there is no NUMA
+ * constraint for the reserved zone.
+ * @param flags
+ * The *flags* arguments is an OR of following flags:
+ * - MEMPOOL_F_NO_SPREAD: By default, objects addresses are spread
+ * between channels in RAM: the pool allocator will add padding
+ * between objects depending on the hardware configuration. See
+ * Memory alignment constraints for details. If this flag is set,
+ * the allocator will just align them to a cache line.
+ * - MEMPOOL_F_NO_CACHE_ALIGN: By default, the returned objects are
+ * cache-aligned. This flag removes this constraint, and no
+ * padding will be present between objects. This flag implies
+ * MEMPOOL_F_NO_SPREAD.
+ * - MEMPOOL_F_SP_PUT: If this flag is set, the default behavior
+ * when using rte_mempool_put() or rte_mempool_put_bulk() is
+ * "single-producer". Otherwise, it is "multi-producers".
+ * - MEMPOOL_F_SC_GET: If this flag is set, the default behavior
+ * when using rte_mempool_get() or rte_mempool_get_bulk() is
+ * "single-consumer". Otherwise, it is "multi-consumers".
+ * @return
+ * The pointer to the new allocated mempool, on success. NULL on error
+ * with rte_errno set appropriately. Possible rte_errno values include:
+ * - E_RTE_NO_CONFIG - function could not get pointer to rte_config structure
+ * - E_RTE_SECONDARY - function was called from a secondary process instance
+ * - EINVAL - cache size provided is too large
+ * - ENOSPC - the maximum number of memzones has already been allocated
+ * - EEXIST - a memzone with the same name already exists
+ * - ENOMEM - no appropriate memory area found in which to create memzone
+ */
+struct rte_mempool *
+rte_dom0_mempool_create(const char *name, unsigned n, unsigned elt_size,
+ unsigned cache_size, unsigned private_data_size,
+ rte_mempool_ctor_t *mp_init, void *mp_init_arg,
+ rte_mempool_obj_ctor_t *obj_init, void *obj_init_arg,
+ int socket_id, unsigned flags);
+#endif
+
/**
* Dump the status of the mempool to the console.
*
+ * @param f
+ * A pointer to a file for output
* @param mp
* A pointer to the mempool structure.
*/
-void rte_mempool_dump(const struct rte_mempool *mp);
+void rte_mempool_dump(FILE *f, const struct rte_mempool *mp);
/**
* @internal Put several objects back in the mempool; used internally.
__MEMPOOL_STAT_ADD(mp, put, n);
#if RTE_MEMPOOL_CACHE_MAX_SIZE > 0
- /* cache is not enabled or single producer */
- if (unlikely(cache_size == 0 || is_mp == 0))
+ /* cache is not enabled or single producer or non-EAL thread */
+ if (unlikely(cache_size == 0 || is_mp == 0 ||
+ lcore_id >= RTE_MAX_LCORE))
goto ring_enqueue;
/* Go straight to ring if put would overflow mem allocated for cache */
unsigned n, int is_mc)
{
int ret;
-#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
- unsigned n_orig = n;
-#endif
#if RTE_MEMPOOL_CACHE_MAX_SIZE > 0
struct rte_mempool_cache *cache;
uint32_t index, len;
uint32_t cache_size = mp->cache_size;
/* cache is not enabled or single consumer */
- if (unlikely(cache_size == 0 || is_mc == 0 || n >= cache_size))
+ if (unlikely(cache_size == 0 || is_mc == 0 ||
+ n >= cache_size || lcore_id >= RTE_MAX_LCORE))
goto ring_dequeue;
cache = &mp->local_cache[lcore_id];
cache->len -= n;
- __MEMPOOL_STAT_ADD(mp, get_success, n_orig);
+ __MEMPOOL_STAT_ADD(mp, get_success, n);
return 0;
ret = rte_ring_sc_dequeue_bulk(mp->ring, obj_table, n);
if (ret < 0)
- __MEMPOOL_STAT_ADD(mp, get_fail, n_orig);
+ __MEMPOOL_STAT_ADD(mp, get_fail, n);
else
- __MEMPOOL_STAT_ADD(mp, get_success, n_orig);
+ __MEMPOOL_STAT_ADD(mp, get_success, n);
return ret;
}
* @return
* The physical address of the elt element.
*/
-static inline phys_addr_t rte_mempool_virt2phy(const struct rte_mempool *mp,
- const void *elt)
+static inline phys_addr_t
+rte_mempool_virt2phy(const struct rte_mempool *mp, const void *elt)
{
- uintptr_t off;
-
- off = (const char *)elt - (const char *)mp;
- return mp->phys_addr + off;
+ if (rte_eal_has_hugepages()) {
+ uintptr_t off;
+
+ off = (const char *)elt - (const char *)mp->elt_va_start;
+ return (mp->elt_pa[off >> mp->pg_shift] + (off & mp->pg_mask));
+ } else {
+ /*
+ * If huge pages are disabled, we cannot assume the
+ * memory region to be physically contiguous.
+ * Lookup for each element.
+ */
+ return rte_mem_virt2phy(elt);
+ }
}
-
/**
* Check the consistency of mempool objects.
*
*/
static inline void *rte_mempool_get_priv(struct rte_mempool *mp)
{
- return (char *)mp + sizeof(struct rte_mempool);
+ return (char *)mp + MEMPOOL_HEADER_SIZE(mp, mp->pg_num);
}
/**
* Dump the status of all mempools on the console
+ *
+ * @param f
+ * A pointer to a file for output
*/
-void rte_mempool_list_dump(void);
+void rte_mempool_list_dump(FILE *f);
/**
* Search a mempool from its name
* @param name
* The name of the mempool.
* @return
- * The pointer to the mempool matching the name, or NULL if not found.NULL on error
+ * The pointer to the mempool matching the name, or NULL if not found.
+ * NULL on error
* with rte_errno set appropriately. Possible rte_errno values include:
* - ENOENT - required entry not available to return.
*
*/
struct rte_mempool *rte_mempool_lookup(const char *name);
+/**
+ * Get the header, trailer and total size of a mempool element.
+ *
+ * Given a desired size of the mempool element and mempool flags,
+ * calculates header, trailer, body and total sizes of the mempool object.
+ *
+ * @param elt_size
+ * The size of each element.
+ * @param flags
+ * The flags used for the mempool creation.
+ * Consult rte_mempool_create() for more information about possible values.
+ * The size of each element.
+ * @param sz
+ * The calculated detailed size the mempool object. May be NULL.
+ * @return
+ * Total size of the mempool object.
+ */
+uint32_t rte_mempool_calc_obj_size(uint32_t elt_size, uint32_t flags,
+ struct rte_mempool_objsz *sz);
+
+/**
+ * Get the size of memory required to store mempool elements.
+ *
+ * Calculate the maximum amount of memory required to store given number
+ * of objects. Assume that the memory buffer will be aligned at page
+ * boundary.
+ *
+ * Note that if object size is bigger then page size, then it assumes
+ * that pages are grouped in subsets of physically continuous pages big
+ * enough to store at least one object.
+ *
+ * @param elt_num
+ * Number of elements.
+ * @param elt_sz
+ * The size of each element.
+ * @param pg_shift
+ * LOG2 of the physical pages size.
+ * @return
+ * Required memory size aligned at page boundary.
+ */
+size_t rte_mempool_xmem_size(uint32_t elt_num, size_t elt_sz,
+ uint32_t pg_shift);
+
+/**
+ * Get the size of memory required to store mempool elements.
+ *
+ * Calculate how much memory would be actually required with the given
+ * memory footprint to store required number of objects.
+ *
+ * @param vaddr
+ * Virtual address of the externally allocated memory buffer.
+ * Will be used to store mempool objects.
+ * @param elt_num
+ * Number of elements.
+ * @param elt_sz
+ * The size of each element.
+ * @param paddr
+ * Array of physical addresses of the pages that comprises given memory
+ * buffer.
+ * @param pg_num
+ * Number of elements in the paddr array.
+ * @param pg_shift
+ * LOG2 of the physical pages size.
+ * @return
+ * On success, the number of bytes needed to store given number of
+ * objects, aligned to the given page size. If the provided memory
+ * buffer is too small, return a negative value whose absolute value
+ * is the actual number of elements that can be stored in that buffer.
+ */
+ssize_t rte_mempool_xmem_usage(void *vaddr, uint32_t elt_num, size_t elt_sz,
+ const phys_addr_t paddr[], uint32_t pg_num, uint32_t pg_shift);
+
+/**
+ * Walk list of all memory pools
+ *
+ * @param func
+ * Iterator function
+ * @param arg
+ * Argument passed to iterator
+ */
+void rte_mempool_walk(void (*func)(const struct rte_mempool *, void *arg),
+ void *arg);
+
#ifdef __cplusplus
}
#endif