X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;ds=inline;f=doc%2Fguides%2Fnics%2Fmlx5.rst;h=52e1213cf5403de1b8d45e3591db73c94a57985e;hb=997b32c20f9d852990582a6a701b601d6a6b89c6;hp=1ec5bcde9d772921a53f577270e5748b6b8856a4;hpb=dd3331c6f1ced718bc1634924b35849cc4ffbd70;p=dpdk.git

diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
index 1ec5bcde9d..52e1213cf5 100644
--- a/doc/guides/nics/mlx5.rst
+++ b/doc/guides/nics/mlx5.rst
@@ -49,7 +49,7 @@ libibverbs.
 Features
 --------
 
-- Multi arch support: x86_64, POWER8, ARMv8.
+- Multi arch support: x86_64, POWER8, ARMv8, i686.
 - Multiple TX and RX queues.
 - Support for scattered TX and RX frames.
 - IPv4, IPv6, TCPv4, TCPv6, UDPv4 and UDPv6 RSS on any number of queues.
@@ -74,7 +74,7 @@ Features
 - RX interrupts.
 - Statistics query including Basic, Extended and per queue.
 - Rx HW timestamp.
-- Tunnel types: VXLAN, L3 VXLAN, VXLAN-GPE, GRE.
+- Tunnel types: VXLAN, L3 VXLAN, VXLAN-GPE, GRE, MPLSoGRE, MPLSoUDP.
 - Tunnel HW offloads: packet type, inner/outer RSS, IP and UDP checksum verification.
 
 Limitations
@@ -113,6 +113,8 @@ Limitations
 
 - VXLAN TSO and checksum offloads are not supported on VM.
 
+- L3 VXLAN and VXLAN-GPE tunnels cannot be supported together with MPLSoGRE and MPLSoUDP.
+
 - VF: flow rules created on VF devices can only match traffic targeted at the
   configured MAC addresses (see ``rte_eth_dev_mac_addr_add()``).
 
@@ -130,6 +132,10 @@ Limitations
   the external buffers will be freed by PMD and the application which still
   holds the external buffers may be corrupted.
 
+- If Multi-Packet Rx queue is configured (``mprq_en``) and Rx CQE compression is
+  enabled (``rxq_cqe_comp_en``) at the same time, RSS hash result is not fully
+  supported. Some Rx packets may not have PKT_RX_RSS_HASH.
+
 Statistics
 ----------
 
@@ -386,6 +392,18 @@ Run-time configuration
 
   Disabled by default.
 
+- ``representor`` parameter [list]
+
+  This parameter can be used to instantiate DPDK Ethernet devices from
+  existing port (or VF) representors configured on the device.
+
+  It is a standard parameter whose format is described in
+  :ref:`ethernet_device_standard_device_arguments`.
+
+  For instance, to probe port representors 0 through 2::
+
+    representor=[0-2]
+
 Firmware configuration
 ~~~~~~~~~~~~~~~~~~~~~~
 
@@ -430,6 +448,12 @@ DPDK and must be installed separately:
   This library basically implements send/receive calls to the hardware
   queues.
 
+- **libmnl**
+
+  Minimalistic Netlink library mainly relied on to manage E-Switch flow
+  rules (i.e. those with the "transfer" attribute and typically involving
+  port representors).
+
 - **Kernel modules**
 
   They provide the kernel-side Verbs API and low level device drivers that
@@ -471,6 +495,10 @@ RMDA Core with Linux Kernel
 - Minimal kernel version : v4.14 or the most recent 4.14-rc (see `Linux installation documentation`_)
 - Minimal rdma-core version: v15+ commit 0c5f5765213a ("Merge pull request #227 from yishaih/tm")
   (see `RDMA Core installation documentation`_)
+- When building for i686 use:
+
+  - rdma-core version 18.0 or above built with 32bit support.
+  - Kernel version 4.14.41 or above.
 
 .. _`Linux installation documentation`: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/plain/Documentation/admin-guide/README.rst
 .. _`RDMA Core installation documentation`: https://raw.githubusercontent.com/linux-rdma/rdma-core/master/README.md
@@ -478,7 +506,7 @@ RMDA Core with Linux Kernel
 Mellanox OFED
 ^^^^^^^^^^^^^
 
-- Mellanox OFED version: **4.2, 4.3**.
+- Mellanox OFED version: **4.3, 4.4**.
 - firmware version:
 
   - ConnectX-4: **12.21.1000** and above.
@@ -504,6 +532,19 @@ required from that distribution.
    this DPDK release was developed and tested against is strongly
    recommended. Please check the `prerequisites`_.
 
+Libmnl
+^^^^^^
+
+Minimal version for libmnl is **1.0.3**.
+
+As a dependency of the **iproute2** suite, this library is often installed
+by default. It is otherwise readily available through standard system
+packages.
+
+Its development headers must be installed in order to compile this PMD.
+These packages are usually named **libmnl-dev** or **libmnl-devel**
+depending on the Linux distribution.
+
 Supported NICs
 --------------