X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=app%2Ftest-pmd%2Ftestpmd.c;h=41c39b16f07464ff22ef71b0a489e807f7298933;hb=7e4441c8efb95ba2e14cafe63c86c335b658c18d;hp=f22d1b6f61a3d38adf9646b7edf87f81c98c5bf5;hpb=a8ef3e3a980e585fac81992764e42df4343528e4;p=dpdk.git diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index f22d1b6f61..41c39b16f0 100644 --- a/app/test-pmd/testpmd.c +++ b/app/test-pmd/testpmd.c @@ -1,7 +1,7 @@ /*- * BSD LICENSE * - * Copyright(c) 2010-2016 Intel Corporation. All rights reserved. + * Copyright(c) 2010-2017 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -63,7 +63,6 @@ #include #include #include -#include #include #include #include @@ -76,6 +75,14 @@ #ifdef RTE_LIBRTE_PMD_XENVIRT #include #endif +#ifdef RTE_LIBRTE_PDUMP +#include +#endif +#include +#include +#ifdef RTE_LIBRTE_BITRATE +#include +#endif #include "testpmd.h" @@ -108,7 +115,7 @@ uint8_t mp_anon = 0; /* * Record the Ethernet address of peer target ports to which packets are * forwarded. - * Must be instanciated with the ethernet addresses of peer traffic generator + * Must be instantiated with the ethernet addresses of peer traffic generator * ports. */ struct ether_addr peer_eth_addrs[RTE_MAX_ETHPORTS]; @@ -144,7 +151,6 @@ streamid_t nb_fwd_streams; /**< Is equal to (nb_ports * nb_rxq). */ struct fwd_engine * fwd_engines[] = { &io_fwd_engine, &mac_fwd_engine, - &mac_retry_fwd_engine, &mac_swap_engine, &flow_gen_engine, &rx_only_engine, @@ -159,6 +165,9 @@ struct fwd_engine * fwd_engines[] = { struct fwd_config cur_fwd_config; struct fwd_engine *cur_fwd_eng = &io_fwd_engine; /**< IO mode by default. */ +uint32_t retry_enabled; +uint32_t burst_tx_delay_time = BURST_TX_WAIT_US; +uint32_t burst_tx_retry_num = BURST_TX_RETRIES; uint16_t mbuf_data_size = DEFAULT_MBUF_DATA_SIZE; /**< Mbuf data space size. */ uint32_t param_total_num_mbufs = 0; /**< number of mbufs in all pools - if @@ -318,6 +327,9 @@ uint16_t nb_rx_queue_stats_mappings = 0; unsigned max_socket = 0; +/* Bitrate statistics */ +struct rte_stats_bitrates *bitrate_data; + /* Forward function declarations */ static void map_port_queue_stats_mapping_registers(uint8_t pi, struct rte_port *port); static void check_all_ports_link_status(uint32_t port_mask); @@ -436,10 +448,13 @@ mbuf_pool_create(uint16_t mbuf_seg_size, unsigned nb_mbuf, mb_size, (unsigned) mb_mempool_cache, sizeof(struct rte_pktmbuf_pool_private), socket_id, 0); + if (rte_mp == NULL) + goto err; if (rte_mempool_populate_anon(rte_mp) == 0) { rte_mempool_free(rte_mp); rte_mp = NULL; + goto err; } rte_pktmbuf_pool_init(rte_mp, NULL); rte_mempool_obj_iter(rte_mp, rte_pktmbuf_init, NULL); @@ -450,6 +465,7 @@ mbuf_pool_create(uint16_t mbuf_seg_size, unsigned nb_mbuf, } } +err: if (rte_mp == NULL) { rte_exit(EXIT_FAILURE, "Creation of mbuf pool for socket %u failed: %s\n", @@ -591,6 +607,8 @@ init_config(void) /* Configuration of packet forwarding streams. */ if (init_fwd_streams() < 0) rte_exit(EXIT_FAILURE, "FAIL from init_fwd_streams()\n"); + + fwd_config_setup(); } @@ -870,17 +888,35 @@ flush_fwd_rx_queues(void) uint16_t nb_rx; uint16_t i; uint8_t j; + uint64_t prev_tsc = 0, diff_tsc, cur_tsc, timer_tsc = 0; + uint64_t timer_period; + + /* convert to number of cycles */ + timer_period = rte_get_timer_hz(); /* 1 second timeout */ for (j = 0; j < 2; j++) { for (rxp = 0; rxp < cur_fwd_config.nb_fwd_ports; rxp++) { for (rxq = 0; rxq < nb_rxq; rxq++) { port_id = fwd_ports_ids[rxp]; + /** + * testpmd can stuck in the below do while loop + * if rte_eth_rx_burst() always returns nonzero + * packets. So timer is added to exit this loop + * after 1sec timer expiry. + */ + prev_tsc = rte_rdtsc(); do { nb_rx = rte_eth_rx_burst(port_id, rxq, pkts_burst, MAX_PKT_BURST); for (i = 0; i < nb_rx; i++) rte_pktmbuf_free(pkts_burst[i]); - } while (nb_rx > 0); + + cur_tsc = rte_rdtsc(); + diff_tsc = cur_tsc - prev_tsc; + timer_tsc += diff_tsc; + } while ((nb_rx > 0) && + (timer_tsc < timer_period)); + timer_tsc = 0; } } rte_delay_ms(10); /* wait 10 milli-seconds before retrying */ @@ -893,12 +929,30 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd) struct fwd_stream **fsm; streamid_t nb_fs; streamid_t sm_id; - +#ifdef RTE_LIBRTE_BITRATE + uint64_t tics_per_1sec; + uint64_t tics_datum; + uint64_t tics_current; + uint8_t idx_port, cnt_ports; + + cnt_ports = rte_eth_dev_count(); + tics_datum = rte_rdtsc(); + tics_per_1sec = rte_get_timer_hz(); +#endif fsm = &fwd_streams[fc->stream_idx]; nb_fs = fc->stream_nb; do { for (sm_id = 0; sm_id < nb_fs; sm_id++) (*pkt_fwd)(fsm[sm_id]); +#ifdef RTE_LIBRTE_BITRATE + tics_current = rte_rdtsc(); + if (tics_current - tics_datum >= tics_per_1sec) { + /* Periodic bitrate calculation */ + for (idx_port = 0; idx_port < cnt_ports; idx_port++) + rte_stats_bitrate_calc(bitrate_data, idx_port); + tics_datum = tics_current; + } +#endif } while (! fc->stopped); } @@ -992,6 +1046,12 @@ start_packet_forwarding(int with_tx_first) printf("Packet forwarding already started\n"); return; } + + if (init_fwd_streams() < 0) { + printf("Fail from init_fwd_streams()\n"); + return; + } + if(dcb_test) { for (i = 0; i < nb_fwd_ports; i++) { pt_id = fwd_ports_ids[i]; @@ -1014,6 +1074,7 @@ start_packet_forwarding(int with_tx_first) flush_fwd_rx_queues(); fwd_config_setup(); + pkt_fwd_config_display(&cur_fwd_config); rxtx_config_display(); for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) { @@ -1047,8 +1108,11 @@ start_packet_forwarding(int with_tx_first) for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) (*port_fwd_begin)(fwd_ports_ids[i]); } - launch_packet_forwarding(run_one_txonly_burst_on_core); - rte_eal_mp_wait_lcore(); + while (with_tx_first--) { + launch_packet_forwarding( + run_one_txonly_burst_on_core); + rte_eal_mp_wait_lcore(); + } port_fwd_end = tx_only_engine.port_fwd_end; if (port_fwd_end != NULL) { for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) @@ -1081,10 +1145,6 @@ stop_packet_forwarding(void) #endif static const char *acc_stats_border = "+++++++++++++++"; - if (all_ports_started() == 0) { - printf("Not all ports were started\n"); - return; - } if (test_done) { printf("Packet forwarding not started\n"); return; @@ -1282,11 +1342,6 @@ start_port(portid_t pid) if (port_id_is_invalid(pid, ENABLED_WARN)) return 0; - if (init_fwd_streams() < 0) { - printf("Fail from init_fwd_streams()\n"); - return -1; - } - if(dcb_config) dcb_test = 1; FOREACH_PORT(pi, ports) { @@ -1357,7 +1412,7 @@ start_port(portid_t pid) if (mp == NULL) { printf("Failed to setup RX queue:" "No mempool allocation" - "on the socket %d\n", + " on the socket %d\n", rxring_numa[pi]); return -1; } @@ -1365,17 +1420,23 @@ start_port(portid_t pid) diag = rte_eth_rx_queue_setup(pi, qi, nb_rxd,rxring_numa[pi], &(port->rx_conf),mp); - } - else + } else { + struct rte_mempool *mp = + mbuf_pool_find(port->socket_id); + if (mp == NULL) { + printf("Failed to setup RX queue:" + "No mempool allocation" + " on the socket %d\n", + port->socket_id); + return -1; + } diag = rte_eth_rx_queue_setup(pi, qi, nb_rxd,port->socket_id, - &(port->rx_conf), - mbuf_pool_find(port->socket_id)); - + &(port->rx_conf), mp); + } if (diag == 0) continue; - /* Fail to setup rx queue, return */ if (rte_atomic16_cmpset(&(port->port_status), RTE_PORT_HANDLING, @@ -1449,6 +1510,11 @@ stop_port(portid_t pid) continue; } + if (port_is_bonding_slave(pi)) { + printf("Please remove port %d from bonded device.\n", pi); + continue; + } + port = &ports[pi]; if (rte_atomic16_cmpset(&(port->port_status), RTE_PORT_STARTED, RTE_PORT_HANDLING) == 0) @@ -1487,6 +1553,11 @@ close_port(portid_t pid) continue; } + if (port_is_bonding_slave(pi)) { + printf("Please remove port %d from bonded device.\n", pi); + continue; + } + port = &ports[pi]; if (rte_atomic16_cmpset(&(port->port_status), RTE_PORT_CLOSED, RTE_PORT_CLOSED) == 1) { @@ -1500,6 +1571,8 @@ close_port(portid_t pid) continue; } + if (port->flow_list) + port_flow_flush(pi); rte_eth_dev_close(pi); if (rte_atomic16_cmpset(&(port->port_status), @@ -1514,6 +1587,7 @@ void attach_port(char *identifier) { portid_t pi = 0; + unsigned int socket_id; printf("Attaching a new port...\n"); @@ -1526,7 +1600,11 @@ attach_port(char *identifier) return; ports[pi].enabled = 1; - reconfig(pi, rte_eth_dev_socket_id(pi)); + socket_id = (unsigned)rte_eth_dev_socket_id(pi); + /* if socket_id is invalid, set to 0 */ + if (check_socket_id(socket_id) < 0) + socket_id = 0; + reconfig(pi, socket_id); rte_eth_promiscuous_enable(pi); nb_ports = rte_eth_dev_count(); @@ -1549,6 +1627,9 @@ detach_port(uint8_t port_id) return; } + if (ports[port_id].flow_list) + port_flow_flush(port_id); + if (rte_eth_dev_detach(port_id, name)) return; @@ -1779,24 +1860,13 @@ init_port_config(void) port->dev_conf.rx_adv_conf.rss_conf.rss_hf = 0; } - if (port->dcb_flag == 0 && port->dev_info.max_vfs == 0) { + if (port->dcb_flag == 0) { if( port->dev_conf.rx_adv_conf.rss_conf.rss_hf != 0) port->dev_conf.rxmode.mq_mode = ETH_MQ_RX_RSS; else port->dev_conf.rxmode.mq_mode = ETH_MQ_RX_NONE; } - if (port->dev_info.max_vfs != 0) { - if (port->dev_conf.rx_adv_conf.rss_conf.rss_hf != 0) - port->dev_conf.rxmode.mq_mode = - ETH_MQ_RX_VMDQ_RSS; - else - port->dev_conf.rxmode.mq_mode = - ETH_MQ_RX_NONE; - - port->dev_conf.txmode.mq_mode = ETH_MQ_TX_NONE; - } - rxtx_port_config(port); rte_eth_macaddr_get(pid, &port->eth_addr); @@ -1824,6 +1894,14 @@ void clear_port_slave_flag(portid_t slave_pid) port->slave_flag = 0; } +uint8_t port_is_bonding_slave(portid_t slave_pid) +{ + struct rte_port *port; + + port = &ports[slave_pid]; + return port->slave_flag; +} + const uint16_t vlan_tags[] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, @@ -1849,7 +1927,7 @@ get_eth_dcb_conf(struct rte_eth_conf *eth_conf, struct rte_eth_vmdq_dcb_tx_conf *vmdq_tx_conf = ð_conf->tx_adv_conf.vmdq_dcb_tx_conf; - /* VMDQ+DCB RX and TX configrations */ + /* VMDQ+DCB RX and TX configurations */ vmdq_rx_conf->enable_default_pool = 0; vmdq_rx_conf->default_pool = 0; vmdq_rx_conf->nb_queue_pools = @@ -1880,9 +1958,9 @@ get_eth_dcb_conf(struct rte_eth_conf *eth_conf, rx_conf->nb_tcs = num_tcs; tx_conf->nb_tcs = num_tcs; - for (i = 0; i < num_tcs; i++) { - rx_conf->dcb_tc[i] = i; - tx_conf->dcb_tc[i] = i; + for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) { + rx_conf->dcb_tc[i] = i % num_tcs; + tx_conf->dcb_tc[i] = i % num_tcs; } eth_conf->rxmode.mq_mode = ETH_MQ_RX_DCB_RSS; eth_conf->rx_adv_conf.rss_conf.rss_hf = rss_hf; @@ -1905,17 +1983,36 @@ init_port_dcb_config(portid_t pid, uint8_t pfc_en) { struct rte_eth_conf port_conf; - struct rte_eth_dev_info dev_info; struct rte_port *rte_port; int retval; uint16_t i; - rte_eth_dev_info_get(pid, &dev_info); + rte_port = &ports[pid]; + + memset(&port_conf, 0, sizeof(struct rte_eth_conf)); + /* Enter DCB configuration status */ + dcb_config = 1; + + /*set configuration of DCB in vt mode and DCB in non-vt mode*/ + retval = get_eth_dcb_conf(&port_conf, dcb_mode, num_tcs, pfc_en); + if (retval < 0) + return retval; + port_conf.rxmode.hw_vlan_filter = 1; + + /** + * Write the configuration into the device. + * Set the numbers of RX & TX queues to 0, so + * the RX & TX queues will not be setup. + */ + (void)rte_eth_dev_configure(pid, 0, 0, &port_conf); + + rte_eth_dev_info_get(pid, &rte_port->dev_info); /* If dev_info.vmdq_pool_base is greater than 0, * the queue id of vmdq pools is started after pf queues. */ - if (dcb_mode == DCB_VT_ENABLED && dev_info.vmdq_pool_base > 0) { + if (dcb_mode == DCB_VT_ENABLED && + rte_port->dev_info.vmdq_pool_base > 0) { printf("VMDQ_DCB multi-queue mode is nonsensical" " for port %d.", pid); return -1; @@ -1925,13 +2022,18 @@ init_port_dcb_config(portid_t pid, * and has the same number of rxq and txq in dcb mode */ if (dcb_mode == DCB_VT_ENABLED) { - nb_rxq = dev_info.max_rx_queues; - nb_txq = dev_info.max_tx_queues; + if (rte_port->dev_info.max_vfs > 0) { + nb_rxq = rte_port->dev_info.nb_rx_queues; + nb_txq = rte_port->dev_info.nb_tx_queues; + } else { + nb_rxq = rte_port->dev_info.max_rx_queues; + nb_txq = rte_port->dev_info.max_tx_queues; + } } else { /*if vt is disabled, use all pf queues */ - if (dev_info.vmdq_pool_base == 0) { - nb_rxq = dev_info.max_rx_queues; - nb_txq = dev_info.max_tx_queues; + if (rte_port->dev_info.vmdq_pool_base == 0) { + nb_rxq = rte_port->dev_info.max_rx_queues; + nb_txq = rte_port->dev_info.max_tx_queues; } else { nb_rxq = (queueid_t)num_tcs; nb_txq = (queueid_t)num_tcs; @@ -1940,16 +2042,6 @@ init_port_dcb_config(portid_t pid, } rx_free_thresh = 64; - memset(&port_conf, 0, sizeof(struct rte_eth_conf)); - /* Enter DCB configuration status */ - dcb_config = 1; - - /*set configuration of DCB in vt mode and DCB in non-vt mode*/ - retval = get_eth_dcb_conf(&port_conf, dcb_mode, num_tcs, pfc_en); - if (retval < 0) - return retval; - - rte_port = &ports[pid]; memcpy(&rte_port->dev_conf, &port_conf, sizeof(struct rte_eth_conf)); rxtx_port_config(rte_port); @@ -1999,6 +2091,10 @@ signal_handler(int signum) if (signum == SIGINT || signum == SIGTERM) { printf("\nSignal %d received, preparing to exit...\n", signum); +#ifdef RTE_LIBRTE_PDUMP + /* uninitialize packet capture framework */ + rte_pdump_uninit(); +#endif force_quit(); /* exit with the expected status */ signal(signum, SIG_DFL); @@ -2019,6 +2115,11 @@ main(int argc, char** argv) if (diag < 0) rte_panic("Cannot init EAL\n"); +#ifdef RTE_LIBRTE_PDUMP + /* initialize packet capture framework */ + rte_pdump_init(NULL); +#endif + nb_ports = (portid_t) rte_eth_dev_count(); if (nb_ports == 0) RTE_LOG(WARNING, EAL, "No probed ethernet devices\n"); @@ -2052,6 +2153,18 @@ main(int argc, char** argv) FOREACH_PORT(port_id, ports) rte_eth_promiscuous_enable(port_id); + /* Init metrics library */ + rte_metrics_init(rte_socket_id()); + + /* Setup bitrate stats */ +#ifdef RTE_LIBRTE_BITRATE + bitrate_data = rte_stats_bitrate_create(); + if (bitrate_data == NULL) + rte_exit(EXIT_FAILURE, "Could not allocate bitrate data.\n"); + rte_stats_bitrate_reg(bitrate_data); +#endif + + #ifdef RTE_LIBRTE_CMDLINE if (interactive == 1) { if (auto_start) {