X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=app%2Ftest-pmd%2Ftestpmd.c;h=484c19bcb3ed5b10ea81e5047636e4b258be5b4d;hb=bcd0e4326647b1dcf564dbbdfd5d8a1a58224d75;hp=754de47782b259802df92db36cf2f3001e90a855;hpb=24427bb914a6375f29635897d23a3192d85b2127;p=dpdk.git diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index 754de47782..484c19bcb3 100644 --- a/app/test-pmd/testpmd.c +++ b/app/test-pmd/testpmd.c @@ -78,6 +78,7 @@ #ifdef RTE_LIBRTE_PDUMP #include #endif +#include #include "testpmd.h" @@ -110,7 +111,7 @@ uint8_t mp_anon = 0; /* * Record the Ethernet address of peer target ports to which packets are * forwarded. - * Must be instanciated with the ethernet addresses of peer traffic generator + * Must be instantiated with the ethernet addresses of peer traffic generator * ports. */ struct ether_addr peer_eth_addrs[RTE_MAX_ETHPORTS]; @@ -271,9 +272,6 @@ uint32_t bypass_timeout = RTE_BYPASS_TMT_OFF; #endif -/* default period is 1 second */ -static uint64_t timer_period = 1; - /* * Ethernet device configuration. */ @@ -884,9 +882,10 @@ flush_fwd_rx_queues(void) uint16_t i; uint8_t j; uint64_t prev_tsc = 0, diff_tsc, cur_tsc, timer_tsc = 0; + uint64_t timer_period; /* convert to number of cycles */ - timer_period *= rte_get_timer_hz(); + timer_period = rte_get_timer_hz(); /* 1 second timeout */ for (j = 0; j < 2; j++) { for (rxp = 0; rxp < cur_fwd_config.nb_fwd_ports; rxp++) { @@ -1547,6 +1546,8 @@ close_port(portid_t pid) continue; } + if (port->flow_list) + port_flow_flush(pi); rte_eth_dev_close(pi); if (rte_atomic16_cmpset(&(port->port_status), @@ -1601,6 +1602,9 @@ detach_port(uint8_t port_id) return; } + if (ports[port_id].flow_list) + port_flow_flush(port_id); + if (rte_eth_dev_detach(port_id, name)) return; @@ -1831,24 +1835,13 @@ init_port_config(void) port->dev_conf.rx_adv_conf.rss_conf.rss_hf = 0; } - if (port->dcb_flag == 0 && port->dev_info.max_vfs == 0) { + if (port->dcb_flag == 0) { if( port->dev_conf.rx_adv_conf.rss_conf.rss_hf != 0) port->dev_conf.rxmode.mq_mode = ETH_MQ_RX_RSS; else port->dev_conf.rxmode.mq_mode = ETH_MQ_RX_NONE; } - if (port->dev_info.max_vfs != 0) { - if (port->dev_conf.rx_adv_conf.rss_conf.rss_hf != 0) - port->dev_conf.rxmode.mq_mode = - ETH_MQ_RX_VMDQ_RSS; - else - port->dev_conf.rxmode.mq_mode = - ETH_MQ_RX_NONE; - - port->dev_conf.txmode.mq_mode = ETH_MQ_TX_NONE; - } - rxtx_port_config(port); rte_eth_macaddr_get(pid, &port->eth_addr); @@ -1909,7 +1902,7 @@ get_eth_dcb_conf(struct rte_eth_conf *eth_conf, struct rte_eth_vmdq_dcb_tx_conf *vmdq_tx_conf = ð_conf->tx_adv_conf.vmdq_dcb_tx_conf; - /* VMDQ+DCB RX and TX configrations */ + /* VMDQ+DCB RX and TX configurations */ vmdq_rx_conf->enable_default_pool = 0; vmdq_rx_conf->default_pool = 0; vmdq_rx_conf->nb_queue_pools = @@ -1940,9 +1933,9 @@ get_eth_dcb_conf(struct rte_eth_conf *eth_conf, rx_conf->nb_tcs = num_tcs; tx_conf->nb_tcs = num_tcs; - for (i = 0; i < num_tcs; i++) { - rx_conf->dcb_tc[i] = i; - tx_conf->dcb_tc[i] = i; + for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) { + rx_conf->dcb_tc[i] = i % num_tcs; + tx_conf->dcb_tc[i] = i % num_tcs; } eth_conf->rxmode.mq_mode = ETH_MQ_RX_DCB_RSS; eth_conf->rx_adv_conf.rss_conf.rss_hf = rss_hf; @@ -1965,17 +1958,36 @@ init_port_dcb_config(portid_t pid, uint8_t pfc_en) { struct rte_eth_conf port_conf; - struct rte_eth_dev_info dev_info; struct rte_port *rte_port; int retval; uint16_t i; - rte_eth_dev_info_get(pid, &dev_info); + rte_port = &ports[pid]; + + memset(&port_conf, 0, sizeof(struct rte_eth_conf)); + /* Enter DCB configuration status */ + dcb_config = 1; + + /*set configuration of DCB in vt mode and DCB in non-vt mode*/ + retval = get_eth_dcb_conf(&port_conf, dcb_mode, num_tcs, pfc_en); + if (retval < 0) + return retval; + port_conf.rxmode.hw_vlan_filter = 1; + + /** + * Write the configuration into the device. + * Set the numbers of RX & TX queues to 0, so + * the RX & TX queues will not be setup. + */ + (void)rte_eth_dev_configure(pid, 0, 0, &port_conf); + + rte_eth_dev_info_get(pid, &rte_port->dev_info); /* If dev_info.vmdq_pool_base is greater than 0, * the queue id of vmdq pools is started after pf queues. */ - if (dcb_mode == DCB_VT_ENABLED && dev_info.vmdq_pool_base > 0) { + if (dcb_mode == DCB_VT_ENABLED && + rte_port->dev_info.vmdq_pool_base > 0) { printf("VMDQ_DCB multi-queue mode is nonsensical" " for port %d.", pid); return -1; @@ -1985,13 +1997,18 @@ init_port_dcb_config(portid_t pid, * and has the same number of rxq and txq in dcb mode */ if (dcb_mode == DCB_VT_ENABLED) { - nb_rxq = dev_info.max_rx_queues; - nb_txq = dev_info.max_tx_queues; + if (rte_port->dev_info.max_vfs > 0) { + nb_rxq = rte_port->dev_info.nb_rx_queues; + nb_txq = rte_port->dev_info.nb_tx_queues; + } else { + nb_rxq = rte_port->dev_info.max_rx_queues; + nb_txq = rte_port->dev_info.max_tx_queues; + } } else { /*if vt is disabled, use all pf queues */ - if (dev_info.vmdq_pool_base == 0) { - nb_rxq = dev_info.max_rx_queues; - nb_txq = dev_info.max_tx_queues; + if (rte_port->dev_info.vmdq_pool_base == 0) { + nb_rxq = rte_port->dev_info.max_rx_queues; + nb_txq = rte_port->dev_info.max_tx_queues; } else { nb_rxq = (queueid_t)num_tcs; nb_txq = (queueid_t)num_tcs; @@ -2000,16 +2017,6 @@ init_port_dcb_config(portid_t pid, } rx_free_thresh = 64; - memset(&port_conf, 0, sizeof(struct rte_eth_conf)); - /* Enter DCB configuration status */ - dcb_config = 1; - - /*set configuration of DCB in vt mode and DCB in non-vt mode*/ - retval = get_eth_dcb_conf(&port_conf, dcb_mode, num_tcs, pfc_en); - if (retval < 0) - return retval; - - rte_port = &ports[pid]; memcpy(&rte_port->dev_conf, &port_conf, sizeof(struct rte_eth_conf)); rxtx_port_config(rte_port);