X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=app%2Ftest-pmd%2Ftestpmd.c;h=bfb2f8efd9ee6f272170f68f90740ac370ffed20;hb=14c66a451ef7c710595fd152a9f7435995089d5d;hp=754de47782b259802df92db36cf2f3001e90a855;hpb=24427bb914a6375f29635897d23a3192d85b2127;p=dpdk.git

diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 754de47782..bfb2f8efd9 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -78,6 +78,7 @@
 #ifdef RTE_LIBRTE_PDUMP
 #include <rte_pdump.h>
 #endif
+#include <rte_flow.h>
 
 #include "testpmd.h"
 
@@ -271,9 +272,6 @@ uint32_t bypass_timeout = RTE_BYPASS_TMT_OFF;
 
 #endif
 
-/* default period is 1 second */
-static uint64_t timer_period = 1;
-
 /*
  * Ethernet device configuration.
  */
@@ -884,9 +882,10 @@ flush_fwd_rx_queues(void)
 	uint16_t  i;
 	uint8_t   j;
 	uint64_t prev_tsc = 0, diff_tsc, cur_tsc, timer_tsc = 0;
+	uint64_t timer_period;
 
 	/* convert to number of cycles */
-	timer_period *= rte_get_timer_hz();
+	timer_period = rte_get_timer_hz(); /* 1 second timeout */
 
 	for (j = 0; j < 2; j++) {
 		for (rxp = 0; rxp < cur_fwd_config.nb_fwd_ports; rxp++) {
@@ -1547,6 +1546,8 @@ close_port(portid_t pid)
 			continue;
 		}
 
+		if (port->flow_list)
+			port_flow_flush(pi);
 		rte_eth_dev_close(pi);
 
 		if (rte_atomic16_cmpset(&(port->port_status),
@@ -1601,6 +1602,9 @@ detach_port(uint8_t port_id)
 		return;
 	}
 
+	if (ports[port_id].flow_list)
+		port_flow_flush(port_id);
+
 	if (rte_eth_dev_detach(port_id, name))
 		return;
 
@@ -1965,17 +1969,36 @@ init_port_dcb_config(portid_t pid,
 		     uint8_t pfc_en)
 {
 	struct rte_eth_conf port_conf;
-	struct rte_eth_dev_info dev_info;
 	struct rte_port *rte_port;
 	int retval;
 	uint16_t i;
 
-	rte_eth_dev_info_get(pid, &dev_info);
+	rte_port = &ports[pid];
+
+	memset(&port_conf, 0, sizeof(struct rte_eth_conf));
+	/* Enter DCB configuration status */
+	dcb_config = 1;
+
+	/*set configuration of DCB in vt mode and DCB in non-vt mode*/
+	retval = get_eth_dcb_conf(&port_conf, dcb_mode, num_tcs, pfc_en);
+	if (retval < 0)
+		return retval;
+	port_conf.rxmode.hw_vlan_filter = 1;
+
+	/**
+	 * Write the configuration into the device.
+	 * Set the numbers of RX & TX queues to 0, so
+	 * the RX & TX queues will not be setup.
+	 */
+	(void)rte_eth_dev_configure(pid, 0, 0, &port_conf);
+
+	rte_eth_dev_info_get(pid, &rte_port->dev_info);
 
 	/* If dev_info.vmdq_pool_base is greater than 0,
 	 * the queue id of vmdq pools is started after pf queues.
 	 */
-	if (dcb_mode == DCB_VT_ENABLED && dev_info.vmdq_pool_base > 0) {
+	if (dcb_mode == DCB_VT_ENABLED &&
+	    rte_port->dev_info.vmdq_pool_base > 0) {
 		printf("VMDQ_DCB multi-queue mode is nonsensical"
 			" for port %d.", pid);
 		return -1;
@@ -1985,13 +2008,18 @@ init_port_dcb_config(portid_t pid,
 	 * and has the same number of rxq and txq in dcb mode
 	 */
 	if (dcb_mode == DCB_VT_ENABLED) {
-		nb_rxq = dev_info.max_rx_queues;
-		nb_txq = dev_info.max_tx_queues;
+		if (rte_port->dev_info.max_vfs > 0) {
+			nb_rxq = rte_port->dev_info.nb_rx_queues;
+			nb_txq = rte_port->dev_info.nb_tx_queues;
+		} else {
+			nb_rxq = rte_port->dev_info.max_rx_queues;
+			nb_txq = rte_port->dev_info.max_tx_queues;
+		}
 	} else {
 		/*if vt is disabled, use all pf queues */
-		if (dev_info.vmdq_pool_base == 0) {
-			nb_rxq = dev_info.max_rx_queues;
-			nb_txq = dev_info.max_tx_queues;
+		if (rte_port->dev_info.vmdq_pool_base == 0) {
+			nb_rxq = rte_port->dev_info.max_rx_queues;
+			nb_txq = rte_port->dev_info.max_tx_queues;
 		} else {
 			nb_rxq = (queueid_t)num_tcs;
 			nb_txq = (queueid_t)num_tcs;
@@ -2000,16 +2028,6 @@ init_port_dcb_config(portid_t pid,
 	}
 	rx_free_thresh = 64;
 
-	memset(&port_conf, 0, sizeof(struct rte_eth_conf));
-	/* Enter DCB configuration status */
-	dcb_config = 1;
-
-	/*set configuration of DCB in vt mode and DCB in non-vt mode*/
-	retval = get_eth_dcb_conf(&port_conf, dcb_mode, num_tcs, pfc_en);
-	if (retval < 0)
-		return retval;
-
-	rte_port = &ports[pid];
 	memcpy(&rte_port->dev_conf, &port_conf, sizeof(struct rte_eth_conf));
 
 	rxtx_port_config(rte_port);