X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=app%2Ftest-pmd%2Ftestpmd.c;h=e097ee04ee37f42d3026dada5546ba67a02f039f;hb=97f1e196799f5664a2f677f789fbe06e1d5ab87a;hp=b29328a69dc9489718a7fafb36e3a27ae8ff28e4;hpb=50c4440ee89bf1fe1303baa86f5b8f9e99b35361;p=dpdk.git diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index b29328a69d..e097ee04ee 100644 --- a/app/test-pmd/testpmd.c +++ b/app/test-pmd/testpmd.c @@ -90,6 +90,7 @@ #ifdef RTE_LIBRTE_LATENCY_STATS #include #endif +#include #include "testpmd.h" @@ -98,6 +99,7 @@ uint16_t verbose_level = 0; /**< Silent by default. */ /* use master core for command line ? */ uint8_t interactive = 0; uint8_t auto_start = 0; +uint8_t tx_first; char cmdline_filename[PATH_MAX] = {0}; /* @@ -180,7 +182,7 @@ uint32_t burst_tx_retry_num = BURST_TX_RETRIES; uint16_t mbuf_data_size = DEFAULT_MBUF_DATA_SIZE; /**< Mbuf data space size. */ uint32_t param_total_num_mbufs = 0; /**< number of mbufs in all pools - if * specified on command-line. */ - +uint16_t stats_period; /**< Period to show statistics (disabled by default) */ /* * Configuration of packet segments used by the "txonly" processing engine. */ @@ -269,6 +271,11 @@ uint16_t port_topology = PORT_TOPOLOGY_PAIRED; /* Ports are paired by default */ */ uint8_t no_flush_rx = 0; /* flush by default */ +/* + * Flow API isolated mode. + */ +uint8_t flow_isolate_all; + /* * Avoids to check link status when starting/stopping a port. */ @@ -378,12 +385,14 @@ lcoreid_t bitrate_lcore_id; uint8_t bitrate_enabled; #endif +struct gro_status gro_ports[RTE_MAX_ETHPORTS]; + /* Forward function declarations */ static void map_port_queue_stats_mapping_registers(uint8_t pi, struct rte_port *port); static void check_all_ports_link_status(uint32_t port_mask); -static void eth_event_callback(uint8_t port_id, - enum rte_eth_event_type type, - void *param); +static int eth_event_callback(uint8_t port_id, + enum rte_eth_event_type type, + void *param, void *ret_param); /* * Check if all the ports are started. @@ -1425,6 +1434,15 @@ start_port(portid_t pid) if (port->need_reconfig > 0) { port->need_reconfig = 0; + if (flow_isolate_all) { + int ret = port_flow_isolate(pi, 1); + if (ret) { + printf("Failed to apply isolated" + " mode on port %d\n", pi); + return -1; + } + } + printf("Configuring Port %d (socket %u)\n", pi, port->socket_id); /* configure port */ @@ -1664,6 +1682,47 @@ close_port(portid_t pid) printf("Done\n"); } +void +reset_port(portid_t pid) +{ + int diag; + portid_t pi; + struct rte_port *port; + + if (port_id_is_invalid(pid, ENABLED_WARN)) + return; + + printf("Resetting ports...\n"); + + RTE_ETH_FOREACH_DEV(pi) { + if (pid != pi && pid != (portid_t)RTE_PORT_ALL) + continue; + + if (port_is_forwarding(pi) != 0 && test_done == 0) { + printf("Please remove port %d from forwarding " + "configuration.\n", pi); + continue; + } + + if (port_is_bonding_slave(pi)) { + printf("Please remove port %d from bonded device.\n", + pi); + continue; + } + + diag = rte_eth_dev_reset(pi); + if (diag == 0) { + port = &ports[pi]; + port->need_reconfig = 1; + port->need_reconfig_queues = 1; + } else { + printf("Failed to reset port %d. diag=%d\n", pi, diag); + } + } + + printf("Done\n"); +} + void attach_port(char *identifier) { @@ -1710,8 +1769,10 @@ detach_port(uint8_t port_id) if (ports[port_id].flow_list) port_flow_flush(port_id); - if (rte_eth_dev_detach(port_id, name)) + if (rte_eth_dev_detach(port_id, name)) { + RTE_LOG(ERR, USER1, "Failed to detach port '%s'\n", name); return; + } nb_ports = rte_eth_dev_count(); @@ -1809,28 +1870,23 @@ static void rmv_event_callback(void *arg) { struct rte_eth_dev *dev; - struct rte_devargs *da; - char name[32] = ""; uint8_t port_id = (intptr_t)arg; RTE_ETH_VALID_PORTID_OR_RET(port_id); dev = &rte_eth_devices[port_id]; - da = dev->device->devargs; stop_port(port_id); close_port(port_id); - if (da->type == RTE_DEVTYPE_VIRTUAL) - snprintf(name, sizeof(name), "%s", da->virt.drv_name); - else if (da->type == RTE_DEVTYPE_WHITELISTED_PCI) - rte_pci_device_name(&da->pci.addr, name, sizeof(name)); - printf("removing device %s\n", name); - rte_eal_dev_detach(name); - dev->state = RTE_ETH_DEV_UNUSED; + printf("removing device %s\n", dev->device->name); + if (rte_eal_dev_detach(dev->device)) + RTE_LOG(ERR, USER1, "Failed to detach device %s\n", + dev->device->name); } /* This function is used by the interrupt thread */ -static void -eth_event_callback(uint8_t port_id, enum rte_eth_event_type type, void *param) +static int +eth_event_callback(uint8_t port_id, enum rte_eth_event_type type, void *param, + void *ret_param) { static const char * const event_desc[] = { [RTE_ETH_EVENT_UNKNOWN] = "Unknown", @@ -1844,6 +1900,7 @@ eth_event_callback(uint8_t port_id, enum rte_eth_event_type type, void *param) }; RTE_SET_USED(param); + RTE_SET_USED(ret_param); if (type >= RTE_ETH_EVENT_MAX) { fprintf(stderr, "\nPort %" PRIu8 ": %s called upon invalid event %d\n", @@ -1864,6 +1921,7 @@ eth_event_callback(uint8_t port_id, enum rte_eth_event_type type, void *param) default: break; } + return 0; } static int @@ -2231,6 +2289,21 @@ force_quit(void) prompt_exit(); } +static void +print_stats(void) +{ + uint8_t i; + const char clr[] = { 27, '[', '2', 'J', '\0' }; + const char top_left[] = { 27, '[', '1', ';', '1', 'H', '\0' }; + + /* Clear screen and move to top left */ + printf("%s%s", clr, top_left); + + printf("\nPort statistics ===================================="); + for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) + nic_stats_display(fwd_ports_ids[i]); +} + static void signal_handler(int signum) { @@ -2294,6 +2367,16 @@ main(int argc, char** argv) if (argc > 1) launch_args_parse(argc, argv); + if (tx_first && interactive) + rte_exit(EXIT_FAILURE, "--tx-first cannot be used on " + "interactive mode.\n"); + + if (tx_first && lsc_interrupt) { + printf("Warning: lsc_interrupt needs to be off when " + " using tx_first. Disabling.\n"); + lsc_interrupt = 0; + } + if (!nb_rxq && !nb_txq) printf("Warning: Either rx or tx queues should be non-zero\n"); @@ -2353,7 +2436,29 @@ main(int argc, char** argv) int rc; printf("No commandline core given, start packet forwarding\n"); - start_packet_forwarding(0); + start_packet_forwarding(tx_first); + if (stats_period != 0) { + uint64_t prev_time = 0, cur_time, diff_time = 0; + uint64_t timer_period; + + /* Convert to number of cycles */ + timer_period = stats_period * rte_get_timer_hz(); + + while (1) { + cur_time = rte_get_timer_cycles(); + diff_time += cur_time - prev_time; + + if (diff_time >= timer_period) { + print_stats(); + /* Reset the timer */ + diff_time = 0; + } + /* Sleep to avoid unnecessary checks */ + prev_time = cur_time; + sleep(1); + } + } + printf("Press enter to exit\n"); rc = read(0, &c, 1); pmd_test_exit();