X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=app%2Ftest-pmd%2Ftestpmd.c;h=e757d81223f66413d9f455e27b615c7f075f9209;hb=fa80b3c9edfe4eaf05bea799e12b4679aceb4cbe;hp=fc8effad9ad314e0b7964fb7527a65415924e5eb;hpb=8b9bd0efe0b6920a08e28eebacf2bb916bdf5653;p=dpdk.git diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index fc8effad9a..e757d81223 100644 --- a/app/test-pmd/testpmd.c +++ b/app/test-pmd/testpmd.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include @@ -91,6 +92,24 @@ uint8_t socket_num = UMA_NO_CONFIG; */ uint8_t mp_anon = 0; +/* + * Store specified sockets on which memory pool to be used by ports + * is allocated. + */ +uint8_t port_numa[RTE_MAX_ETHPORTS]; + +/* + * Store specified sockets on which RX ring to be used by ports + * is allocated. + */ +uint8_t rxring_numa[RTE_MAX_ETHPORTS]; + +/* + * Store specified sockets on which TX ring to be used by ports + * is allocated. + */ +uint8_t txring_numa[RTE_MAX_ETHPORTS]; + /* * Record the Ethernet address of peer target ports to which packets are * forwarded. @@ -192,9 +211,10 @@ queueid_t nb_txq = 1; /**< Number of TX queues per port. */ /* * Configurable number of RX/TX ring descriptors. + * Defaults are supplied by drivers via ethdev. */ -#define RTE_TEST_RX_DESC_DEFAULT 128 -#define RTE_TEST_TX_DESC_DEFAULT 512 +#define RTE_TEST_RX_DESC_DEFAULT 0 +#define RTE_TEST_TX_DESC_DEFAULT 0 uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT; /**< Number of RX descriptors. */ uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT; /**< Number of TX descriptors. */ @@ -266,6 +286,8 @@ uint8_t lsc_interrupt = 1; /* enabled by default */ */ uint8_t rmv_interrupt = 1; /* enabled by default */ +uint8_t hot_plug = 0; /**< hotplug disabled by default. */ + /* * Display or mask ether events * Default to all events except VF_MBOX @@ -274,6 +296,7 @@ uint32_t event_print_mask = (UINT32_C(1) << RTE_ETH_EVENT_UNKNOWN) | (UINT32_C(1) << RTE_ETH_EVENT_INTR_LSC) | (UINT32_C(1) << RTE_ETH_EVENT_QUEUE_STATE) | (UINT32_C(1) << RTE_ETH_EVENT_INTR_RESET) | + (UINT32_C(1) << RTE_ETH_EVENT_IPSEC) | (UINT32_C(1) << RTE_ETH_EVENT_MACSEC) | (UINT32_C(1) << RTE_ETH_EVENT_INTR_RMV); @@ -373,6 +396,12 @@ static void check_all_ports_link_status(uint32_t port_mask); static int eth_event_callback(portid_t port_id, enum rte_eth_event_type type, void *param, void *ret_param); +static void eth_dev_event_callback(char *device_name, + enum rte_dev_event_type type, + void *param); +static int eth_dev_event_callback_register(void); +static int eth_dev_event_callback_unregister(void); + /* * Check if all the ports are started. @@ -676,10 +705,6 @@ init_config(void) DEV_TX_OFFLOAD_MBUF_FAST_FREE)) port->dev_conf.txmode.offloads &= ~DEV_TX_OFFLOAD_MBUF_FAST_FREE; - if (!(port->dev_info.rx_offload_capa & - DEV_RX_OFFLOAD_CRC_STRIP)) - port->dev_conf.rxmode.offloads &= - ~DEV_RX_OFFLOAD_CRC_STRIP; if (numa_support) { if (port_numa[pid] != NUMA_NO_CONFIG) port_per_socket[port_numa[pid]]++; @@ -1096,9 +1121,8 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd) uint64_t tics_per_1sec; uint64_t tics_datum; uint64_t tics_current; - uint8_t idx_port, cnt_ports; + uint16_t idx_port; - cnt_ports = rte_eth_dev_count(); tics_datum = rte_rdtsc(); tics_per_1sec = rte_get_timer_hz(); #endif @@ -1113,9 +1137,7 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd) tics_current = rte_rdtsc(); if (tics_current - tics_datum >= tics_per_1sec) { /* Periodic bitrate calculation */ - for (idx_port = 0; - idx_port < cnt_ports; - idx_port++) + RTE_ETH_FOREACH_DEV(idx_port) rte_stats_bitrate_calc(bitrate_data, idx_port); tics_datum = tics_current; @@ -1572,20 +1594,24 @@ start_port(portid_t pid) } if (port->need_reconfig_queues > 0) { port->need_reconfig_queues = 0; - port->tx_conf.txq_flags = ETH_TXQ_FLAGS_IGNORE; - /* Apply Tx offloads configuration */ - port->tx_conf.offloads = port->dev_conf.txmode.offloads; /* setup tx queues */ for (qi = 0; qi < nb_txq; qi++) { + port->tx_conf[qi].txq_flags = + ETH_TXQ_FLAGS_IGNORE; + /* Apply Tx offloads configuration */ + port->tx_conf[qi].offloads = + port->dev_conf.txmode.offloads; if ((numa_support) && (txring_numa[pi] != NUMA_NO_CONFIG)) diag = rte_eth_tx_queue_setup(pi, qi, - nb_txd,txring_numa[pi], - &(port->tx_conf)); + port->nb_tx_desc[qi], + txring_numa[pi], + &(port->tx_conf[qi])); else diag = rte_eth_tx_queue_setup(pi, qi, - nb_txd,port->socket_id, - &(port->tx_conf)); + port->nb_tx_desc[qi], + port->socket_id, + &(port->tx_conf[qi])); if (diag == 0) continue; @@ -1596,15 +1622,17 @@ start_port(portid_t pid) RTE_PORT_STOPPED) == 0) printf("Port %d can not be set back " "to stopped\n", pi); - printf("Fail to configure port %d tx queues\n", pi); + printf("Fail to configure port %d tx queues\n", + pi); /* try to reconfigure queues next time */ port->need_reconfig_queues = 1; return -1; } - /* Apply Rx offloads configuration */ - port->rx_conf.offloads = port->dev_conf.rxmode.offloads; - /* setup rx queues */ for (qi = 0; qi < nb_rxq; qi++) { + /* Apply Rx offloads configuration */ + port->rx_conf[qi].offloads = + port->dev_conf.rxmode.offloads; + /* setup rx queues */ if ((numa_support) && (rxring_numa[pi] != NUMA_NO_CONFIG)) { struct rte_mempool * mp = @@ -1618,8 +1646,10 @@ start_port(portid_t pid) } diag = rte_eth_rx_queue_setup(pi, qi, - nb_rxd,rxring_numa[pi], - &(port->rx_conf),mp); + port->nb_rx_desc[pi], + rxring_numa[pi], + &(port->rx_conf[qi]), + mp); } else { struct rte_mempool *mp = mbuf_pool_find(port->socket_id); @@ -1631,8 +1661,10 @@ start_port(portid_t pid) return -1; } diag = rte_eth_rx_queue_setup(pi, qi, - nb_rxd,port->socket_id, - &(port->rx_conf), mp); + port->nb_rx_desc[pi], + port->socket_id, + &(port->rx_conf[qi]), + mp); } if (diag == 0) continue; @@ -1643,7 +1675,8 @@ start_port(portid_t pid) RTE_PORT_STOPPED) == 0) printf("Port %d can not be set back " "to stopped\n", pi); - printf("Fail to configure port %d rx queues\n", pi); + printf("Fail to configure port %d rx queues\n", + pi); /* try to reconfigure queues next time */ port->need_reconfig_queues = 1; return -1; @@ -1839,6 +1872,39 @@ reset_port(portid_t pid) printf("Done\n"); } +static int +eth_dev_event_callback_register(void) +{ + int ret; + + /* register the device event callback */ + ret = rte_dev_event_callback_register(NULL, + eth_dev_event_callback, NULL); + if (ret) { + printf("Failed to register device event callback\n"); + return -1; + } + + return 0; +} + + +static int +eth_dev_event_callback_unregister(void) +{ + int ret; + + /* unregister the device event callback */ + ret = rte_dev_event_callback_unregister(NULL, + eth_dev_event_callback, NULL); + if (ret < 0) { + printf("Failed to unregister device event callback\n"); + return -1; + } + + return 0; +} + void attach_port(char *identifier) { @@ -1862,7 +1928,7 @@ attach_port(char *identifier) reconfig(pi, socket_id); rte_eth_promiscuous_enable(pi); - nb_ports = rte_eth_dev_count(); + nb_ports = rte_eth_dev_count_avail(); ports[pi].port_status = RTE_PORT_STOPPED; @@ -1890,7 +1956,7 @@ detach_port(portid_t port_id) return; } - nb_ports = rte_eth_dev_count(); + nb_ports = rte_eth_dev_count_avail(); printf("Port '%s' is detached. Now total ports is %d\n", name, nb_ports); @@ -1902,6 +1968,7 @@ void pmd_test_exit(void) { portid_t pt_id; + int ret; if (test_done == 0) stop_packet_forwarding(); @@ -1915,6 +1982,19 @@ pmd_test_exit(void) close_port(pt_id); } } + + if (hot_plug) { + ret = rte_dev_event_monitor_stop(); + if (ret) + RTE_LOG(ERR, EAL, + "fail to stop device event monitor."); + + ret = eth_dev_event_callback_unregister(); + if (ret) + RTE_LOG(ERR, EAL, + "fail to unregister all event callbacks."); + } + printf("\nBye...\n"); } @@ -2010,6 +2090,7 @@ eth_event_callback(portid_t port_id, enum rte_eth_event_type type, void *param, [RTE_ETH_EVENT_QUEUE_STATE] = "Queue state", [RTE_ETH_EVENT_INTR_RESET] = "Interrupt reset", [RTE_ETH_EVENT_VF_MBOX] = "VF Mbox", + [RTE_ETH_EVENT_IPSEC] = "IPsec", [RTE_ETH_EVENT_MACSEC] = "MACsec", [RTE_ETH_EVENT_INTR_RMV] = "device removal", [RTE_ETH_EVENT_NEW] = "device probed", @@ -2045,6 +2126,37 @@ eth_event_callback(portid_t port_id, enum rte_eth_event_type type, void *param, return 0; } +/* This function is used by the interrupt thread */ +static void +eth_dev_event_callback(char *device_name, enum rte_dev_event_type type, + __rte_unused void *arg) +{ + if (type >= RTE_DEV_EVENT_MAX) { + fprintf(stderr, "%s called upon invalid event %d\n", + __func__, type); + fflush(stderr); + } + + switch (type) { + case RTE_DEV_EVENT_REMOVE: + RTE_LOG(ERR, EAL, "The device: %s has been removed!\n", + device_name); + /* TODO: After finish failure handle, begin to stop + * packet forward, stop port, close port, detach port. + */ + break; + case RTE_DEV_EVENT_ADD: + RTE_LOG(ERR, EAL, "The device: %s has been added!\n", + device_name); + /* TODO: After finish kernel driver binding, + * begin to attach port. + */ + break; + default: + break; + } +} + static int set_tx_queue_stats_mapping_registers(portid_t port_id, struct rte_port *port) { @@ -2126,39 +2238,51 @@ map_port_queue_stats_mapping_registers(portid_t pi, struct rte_port *port) static void rxtx_port_config(struct rte_port *port) { - port->rx_conf = port->dev_info.default_rxconf; - port->tx_conf = port->dev_info.default_txconf; + uint16_t qid; + + for (qid = 0; qid < nb_rxq; qid++) { + port->rx_conf[qid] = port->dev_info.default_rxconf; + + /* Check if any Rx parameters have been passed */ + if (rx_pthresh != RTE_PMD_PARAM_UNSET) + port->rx_conf[qid].rx_thresh.pthresh = rx_pthresh; - /* Check if any RX/TX parameters have been passed */ - if (rx_pthresh != RTE_PMD_PARAM_UNSET) - port->rx_conf.rx_thresh.pthresh = rx_pthresh; + if (rx_hthresh != RTE_PMD_PARAM_UNSET) + port->rx_conf[qid].rx_thresh.hthresh = rx_hthresh; - if (rx_hthresh != RTE_PMD_PARAM_UNSET) - port->rx_conf.rx_thresh.hthresh = rx_hthresh; + if (rx_wthresh != RTE_PMD_PARAM_UNSET) + port->rx_conf[qid].rx_thresh.wthresh = rx_wthresh; - if (rx_wthresh != RTE_PMD_PARAM_UNSET) - port->rx_conf.rx_thresh.wthresh = rx_wthresh; + if (rx_free_thresh != RTE_PMD_PARAM_UNSET) + port->rx_conf[qid].rx_free_thresh = rx_free_thresh; - if (rx_free_thresh != RTE_PMD_PARAM_UNSET) - port->rx_conf.rx_free_thresh = rx_free_thresh; + if (rx_drop_en != RTE_PMD_PARAM_UNSET) + port->rx_conf[qid].rx_drop_en = rx_drop_en; - if (rx_drop_en != RTE_PMD_PARAM_UNSET) - port->rx_conf.rx_drop_en = rx_drop_en; + port->nb_rx_desc[qid] = nb_rxd; + } + + for (qid = 0; qid < nb_txq; qid++) { + port->tx_conf[qid] = port->dev_info.default_txconf; - if (tx_pthresh != RTE_PMD_PARAM_UNSET) - port->tx_conf.tx_thresh.pthresh = tx_pthresh; + /* Check if any Tx parameters have been passed */ + if (tx_pthresh != RTE_PMD_PARAM_UNSET) + port->tx_conf[qid].tx_thresh.pthresh = tx_pthresh; - if (tx_hthresh != RTE_PMD_PARAM_UNSET) - port->tx_conf.tx_thresh.hthresh = tx_hthresh; + if (tx_hthresh != RTE_PMD_PARAM_UNSET) + port->tx_conf[qid].tx_thresh.hthresh = tx_hthresh; - if (tx_wthresh != RTE_PMD_PARAM_UNSET) - port->tx_conf.tx_thresh.wthresh = tx_wthresh; + if (tx_wthresh != RTE_PMD_PARAM_UNSET) + port->tx_conf[qid].tx_thresh.wthresh = tx_wthresh; - if (tx_rs_thresh != RTE_PMD_PARAM_UNSET) - port->tx_conf.tx_rs_thresh = tx_rs_thresh; + if (tx_rs_thresh != RTE_PMD_PARAM_UNSET) + port->tx_conf[qid].tx_rs_thresh = tx_rs_thresh; - if (tx_free_thresh != RTE_PMD_PARAM_UNSET) - port->tx_conf.tx_free_thresh = tx_free_thresh; + if (tx_free_thresh != RTE_PMD_PARAM_UNSET) + port->tx_conf[qid].tx_free_thresh = tx_free_thresh; + + port->nb_tx_desc[qid] = nb_txd; + } } void @@ -2331,6 +2455,9 @@ init_port_dcb_config(portid_t pid, /* Enter DCB configuration status */ dcb_config = 1; + port_conf.rxmode = rte_port->dev_conf.rxmode; + port_conf.txmode = rte_port->dev_conf.txmode; + /*set configuration of DCB in vt mode and DCB in non-vt mode*/ retval = get_eth_dcb_conf(&port_conf, dcb_mode, num_tcs, pfc_en); if (retval < 0) @@ -2457,8 +2584,9 @@ signal_handler(int signum) int main(int argc, char** argv) { - int diag; + int diag; portid_t port_id; + int ret; signal(SIGINT, signal_handler); signal(SIGTERM, signal_handler); @@ -2482,7 +2610,7 @@ main(int argc, char** argv) rte_pdump_init(NULL); #endif - nb_ports = (portid_t) rte_eth_dev_count(); + nb_ports = (portid_t) rte_eth_dev_count_avail(); if (nb_ports == 0) TESTPMD_LOG(WARNING, "No probed ethernet devices\n"); @@ -2526,6 +2654,18 @@ main(int argc, char** argv) nb_rxq, nb_txq); init_config(); + + if (hot_plug) { + /* enable hot plug monitoring */ + ret = rte_dev_event_monitor_start(); + if (ret) { + rte_errno = EINVAL; + return -1; + } + eth_dev_event_callback_register(); + + } + if (start_port(RTE_PORT_ALL) != 0) rte_exit(EXIT_FAILURE, "Start ports failed\n");