X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=config%2Fcommon_base;h=0d181ace8f9734ffeda3077cfba8da3741470ee5;hb=5751ff40fed0f7dc359e983d80c768126328561f;hp=170a38939fe38c3d7dae5a3ec2be6700c41e5340;hpb=192f52e23005a98431f2e85a76b3ca6c41570696;p=dpdk.git

diff --git a/config/common_base b/config/common_base
index 170a38939f..0d181ace8f 100644
--- a/config/common_base
+++ b/config/common_base
@@ -1,34 +1,5 @@
-#   BSD LICENSE
-#
-#   Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
-#   All rights reserved.
-#
-#   Redistribution and use in source and binary forms, with or without
-#   modification, are permitted provided that the following conditions
-#   are met:
-#
-#     * Redistributions of source code must retain the above copyright
-#       notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright
-#       notice, this list of conditions and the following disclaimer in
-#       the documentation and/or other materials provided with the
-#       distribution.
-#     * Neither the name of Intel Corporation nor the names of its
-#       contributors may be used to endorse or promote products derived
-#       from this software without specific prior written permission.
-#
-#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2010-2017 Intel Corporation
 
 #
 # define executive environment
@@ -90,7 +61,20 @@ CONFIG_RTE_CACHE_LINE_SIZE=64
 CONFIG_RTE_LIBRTE_EAL=y
 CONFIG_RTE_MAX_LCORE=128
 CONFIG_RTE_MAX_NUMA_NODES=8
-CONFIG_RTE_MAX_MEMSEG=256
+CONFIG_RTE_MAX_MEMSEG_LISTS=64
+# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages
+# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller
+CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192
+CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768
+# a "type" is a combination of page size and NUMA node. total number of memseg
+# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split
+# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or
+# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of
+# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller
+CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768
+CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072
+# global maximum usable amount of VA, in megabytes
+CONFIG_RTE_MAX_MEM_MB=524288
 CONFIG_RTE_MAX_MEMZONE=2560
 CONFIG_RTE_MAX_TAILQ=32
 CONFIG_RTE_ENABLE_ASSERT=n
@@ -103,8 +87,10 @@ CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
 CONFIG_RTE_EAL_IGB_UIO=n
 CONFIG_RTE_EAL_VFIO=n
 CONFIG_RTE_MAX_VFIO_GROUPS=64
+CONFIG_RTE_MAX_VFIO_CONTAINERS=64
 CONFIG_RTE_MALLOC_DEBUG=n
 CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
+CONFIG_RTE_USE_LIBBSD=n
 
 #
 # Recognize/ignore the AVX/AVX512 CPU flags for performance/power testing.
@@ -172,6 +158,12 @@ CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
 CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
 CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
 
+#
+# Compile AMD PMD
+#
+CONFIG_RTE_LIBRTE_AXGBE_PMD=y
+CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n
+
 #
 # Compile burst-oriented Broadcom PMD driver
 #
@@ -201,6 +193,7 @@ CONFIG_RTE_LIBRTE_CXGBE_TPUT=y
 CONFIG_RTE_LIBRTE_DPAA_BUS=n
 CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n
 CONFIG_RTE_LIBRTE_DPAA_PMD=n
+CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
 
 #
 # Compile NXP DPAA2 FSL-MC Bus
@@ -217,11 +210,7 @@ CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
 # Compile burst-oriented NXP DPAA2 PMD driver
 #
 CONFIG_RTE_LIBRTE_DPAA2_PMD=n
-CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT=n
 CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_DPAA2_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX_FREE=n
 
 #
 # Compile burst-oriented Amazon ENA PMD driver
@@ -298,6 +287,7 @@ CONFIG_RTE_LIBRTE_AVF_16BYTE_RX_DESC=n
 #
 CONFIG_RTE_LIBRTE_MLX4_PMD=n
 CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
+CONFIG_RTE_LIBRTE_MLX4_DLOPEN_DEPS=n
 CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
 
 #
@@ -305,6 +295,7 @@ CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
 #
 CONFIG_RTE_LIBRTE_MLX5_PMD=n
 CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
+CONFIG_RTE_LIBRTE_MLX5_DLOPEN_DEPS=n
 CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE=8
 
 #
@@ -317,7 +308,6 @@ CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n
 # QLogic 10G/25G/40G/50G/100G PMD
 #
 CONFIG_RTE_LIBRTE_QEDE_PMD=y
-CONFIG_RTE_LIBRTE_QEDE_DEBUG_INFO=n
 CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
 CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
 #Provides abs path/name of the firmware file.
@@ -334,11 +324,6 @@ CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
 # Compile software PMD backed by SZEDATA2 device
 #
 CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
-#
-# Defines firmware type address space.
-# See documentation for supported values.
-# Other values raise compile time error.
-CONFIG_RTE_LIBRTE_PMD_SZEDATA2_AS=0
 
 #
 # Compile burst-oriented Cavium Thunderx NICVF PMD driver
@@ -410,7 +395,7 @@ CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
 #
 # Compile Marvell PMD driver
 #
-CONFIG_RTE_LIBRTE_MRVL_PMD=n
+CONFIG_RTE_LIBRTE_MVPP2_PMD=n
 
 #
 # Compile virtual device driver for NetVSC on Hyper-V/Azure
@@ -483,17 +468,14 @@ CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
 # Compile NXP DPAA2 crypto sec driver for CAAM HW
 #
 CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
-CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_RX=n
+CONFIG_RTE_DPAA2_SEC_PMD_MAX_NB_SESSIONS=2048
 
 #
 # NXP DPAA caam - crypto driver
 #
 CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
-CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
+CONFIG_RTE_DPAA_SEC_PMD_MAX_NB_SESSIONS=2048
 
 #
 # Compile PMD for QuickAssist based devices
@@ -509,6 +491,20 @@ CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n
 #
 CONFIG_RTE_QAT_PMD_MAX_NB_SESSIONS=2048
 
+#
+# Compile PMD for virtio crypto devices
+#
+CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=y
+#
+# Number of maximum virtio crypto devices
+#
+CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
+#
+# Number of sessions to create in the session memory pool
+# on a single virtio crypto device.
+#
+CONFIG_RTE_VIRTIO_CRYPTO_PMD_MAX_NB_SESSIONS=1024
+
 #
 # Compile PMD for AESNI backed device
 #
@@ -556,6 +552,12 @@ CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER_DEBUG=n
 #
 CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
 
+#
+# Compile PMD for AMD CCP crypto device
+#
+CONFIG_RTE_LIBRTE_PMD_CCP=n
+CONFIG_RTE_LIBRTE_PMD_CCP_CPU_AUTH=n
+
 #
 # Compile PMD for Marvell Crypto device
 #
@@ -574,6 +576,7 @@ CONFIG_RTE_LIBRTE_EVENTDEV=y
 CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
 CONFIG_RTE_EVENT_MAX_DEVS=16
 CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
+CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32
 
 #
 # Compile PMD for skeleton event device
@@ -585,7 +588,6 @@ CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
 # Compile PMD for software event device
 #
 CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=y
-CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV_DEBUG=n
 
 #
 # Compile PMD for octeontx sso event device
@@ -607,10 +609,29 @@ CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n
 #
 CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n
 
+#
+# Compile raw device support
+# EXPERIMENTAL: API may change without prior notice
+#
+CONFIG_RTE_LIBRTE_RAWDEV=y
+CONFIG_RTE_RAWDEV_MAX_DEVS=10
+CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=y
+
+#
+# Compile PMD for NXP DPAA2 CMDIF raw device
+#
+CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n
+
+#
+# Compile PMD for NXP DPAA2 QDMA raw device
+#
+CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n
+
 #
 # Compile librte_ring
 #
 CONFIG_RTE_LIBRTE_RING=y
+CONFIG_RTE_RING_USE_C11_MEM_MODEL=n
 
 #
 # Compile librte_mempool
@@ -622,6 +643,8 @@ CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
 #
 # Compile Mempool drivers
 #
+CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y
+CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64
 CONFIG_RTE_DRIVER_MEMPOOL_RING=y
 CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
 
@@ -811,6 +834,13 @@ CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
 #
 CONFIG_RTE_LIBRTE_PMD_VHOST=n
 
+#
+# Compile IFCVF driver
+# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO
+# should be enabled.
+#
+CONFIG_RTE_LIBRTE_IFCVF_VDPA_PMD=n
+
 #
 # Compile the test application
 #