X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=config%2Fcommon_base;h=660588a3df0673e79d1c71d28e48c77377eccd16;hb=4451e41d47230cdd1ebc1a810642573a8d320208;hp=8907bea3661d5254d80f1ce9a6799f7d2e6f055e;hpb=4d8b986bfece500b343704dd1b508a98d9a96f3c;p=dpdk.git

diff --git a/config/common_base b/config/common_base
index 8907bea366..660588a3df 100644
--- a/config/common_base
+++ b/config/common_base
@@ -103,6 +103,7 @@ CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
 CONFIG_RTE_EAL_IGB_UIO=n
 CONFIG_RTE_EAL_VFIO=n
 CONFIG_RTE_MALLOC_DEBUG=n
+CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
 
 #
 # Recognize/ignore the AVX/AVX512 CPU flags for performance/power testing.
@@ -139,16 +140,11 @@ CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
 #
 # Turn off Tx preparation stage
 #
-# Warning: rte_ethdev_tx_prepare() can be safely disabled only if using a
+# Warning: rte_eth_tx_prepare() can be safely disabled only if using a
 # driver which do not implement any Tx preparation.
 #
 CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
 
-#
-# Support NIC bypass logic
-#
-CONFIG_RTE_NIC_BYPASS=n
-
 #
 # Compile burst-oriented Amazon ENA PMD driver
 #
@@ -182,6 +178,7 @@ CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n
 CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
 CONFIG_RTE_IXGBE_INC_VECTOR=y
+CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
 
 #
 # Compile burst-oriented I40E PMD driver
@@ -240,7 +237,7 @@ CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
 CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
 
 #
-# Compile burst-oriented Chelsio Terminator 10GbE/40GbE (CXGBE) PMD
+# Compile burst-oriented Chelsio Terminator (CXGBE) PMD
 #
 CONFIG_RTE_LIBRTE_CXGBE_PMD=y
 CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
@@ -248,12 +245,14 @@ CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_CXGBE_TPUT=y
 
 #
 # Compile burst-oriented Cisco ENIC PMD driver
 #
 CONFIG_RTE_LIBRTE_ENIC_PMD=y
 CONFIG_RTE_LIBRTE_ENIC_DEBUG=n
+CONFIG_RTE_LIBRTE_ENIC_DEBUG_FLOW=n
 
 #
 # Compile burst-oriented Netronome NFP PMD driver
@@ -278,12 +277,8 @@ CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
 CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
 #
 # Defines firmware type address space.
-# RTE_LIBRTE_PMD_SZEDATA2_AS can be:
-# 0 - for firmwares:
-#         NIC_100G1_LR4
-#         HANIC_100G1_LR4
-#         HANIC_100G1_SR10
-# Other values raise compile time error
+# See documentation for supported values.
+# Other values raise compile time error.
 CONFIG_RTE_LIBRTE_PMD_SZEDATA2_AS=0
 
 #