X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=config%2Fcommon_base;h=660588a3df0673e79d1c71d28e48c77377eccd16;hb=577329e66b9f1e1c227c0f6cb76fe47bb8f8c38c;hp=5812b00b01ccc51443919a16306489dbdbd8c547;hpb=c147eae01cb32a78313709fd372529e813247a98;p=dpdk.git

diff --git a/config/common_base b/config/common_base
index 5812b00b01..660588a3df 100644
--- a/config/common_base
+++ b/config/common_base
@@ -96,12 +96,22 @@ CONFIG_RTE_MAX_TAILQ=32
 CONFIG_RTE_LOG_LEVEL=RTE_LOG_INFO
 CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
 CONFIG_RTE_LOG_HISTORY=256
+CONFIG_RTE_BACKTRACE=y
 CONFIG_RTE_LIBEAL_USE_HPET=n
 CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
 CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
 CONFIG_RTE_EAL_IGB_UIO=n
 CONFIG_RTE_EAL_VFIO=n
 CONFIG_RTE_MALLOC_DEBUG=n
+CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
+
+#
+# Recognize/ignore the AVX/AVX512 CPU flags for performance/power testing.
+# AVX512 is marked as experimental for now, will enable it after enough
+# field test and possible optimization.
+#
+CONFIG_RTE_ENABLE_AVX=y
+CONFIG_RTE_ENABLE_AVX512=n
 
 # Default driver path (or "" to disable)
 CONFIG_RTE_EAL_PMD_PATH=""
@@ -130,16 +140,11 @@ CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
 #
 # Turn off Tx preparation stage
 #
-# Warning: rte_ethdev_tx_prepare() can be safely disabled only if using a
+# Warning: rte_eth_tx_prepare() can be safely disabled only if using a
 # driver which do not implement any Tx preparation.
 #
 CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
 
-#
-# Support NIC bypass logic
-#
-CONFIG_RTE_NIC_BYPASS=n
-
 #
 # Compile burst-oriented Amazon ENA PMD driver
 #
@@ -173,6 +178,7 @@ CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n
 CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
 CONFIG_RTE_IXGBE_INC_VECTOR=y
+CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
 
 #
 # Compile burst-oriented I40E PMD driver
@@ -231,7 +237,7 @@ CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
 CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
 
 #
-# Compile burst-oriented Chelsio Terminator 10GbE/40GbE (CXGBE) PMD
+# Compile burst-oriented Chelsio Terminator (CXGBE) PMD
 #
 CONFIG_RTE_LIBRTE_CXGBE_PMD=y
 CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
@@ -239,12 +245,14 @@ CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_CXGBE_TPUT=y
 
 #
 # Compile burst-oriented Cisco ENIC PMD driver
 #
 CONFIG_RTE_LIBRTE_ENIC_PMD=y
 CONFIG_RTE_LIBRTE_ENIC_DEBUG=n
+CONFIG_RTE_LIBRTE_ENIC_DEBUG_FLOW=n
 
 #
 # Compile burst-oriented Netronome NFP PMD driver
@@ -269,12 +277,8 @@ CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
 CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
 #
 # Defines firmware type address space.
-# RTE_LIBRTE_PMD_SZEDATA2_AS can be:
-# 0 - for firmwares:
-#         NIC_100G1_LR4
-#         HANIC_100G1_LR4
-#         HANIC_100G1_SR10
-# Other values raise compile time error
+# See documentation for supported values.
+# Other values raise compile time error.
 CONFIG_RTE_LIBRTE_PMD_SZEDATA2_AS=0
 
 #
@@ -307,11 +311,17 @@ CONFIG_RTE_LIBRTE_FSLMC_BUS=n
 # Compile Support Libraries for NXP DPAA2
 #
 CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
+CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
 
 #
 # Compile burst-oriented NXP DPAA2 PMD driver
 #
 CONFIG_RTE_LIBRTE_DPAA2_PMD=n
+CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
+CONFIG_RTE_LIBRTE_DPAA2_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX_FREE=n
 
 #
 # Compile burst-oriented VIRTIO PMD driver
@@ -428,6 +438,14 @@ CONFIG_RTE_CRYPTODEV_NAME_LEN=64
 CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
 CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
 
+#
+# Compile NXP DPAA2 crypto sec driver for CAAM HW
+#
+CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
+CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_DRIVER=n
+CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_RX=n
+
 #
 # Compile PMD for QuickAssist based devices
 #