X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=config%2Fcommon_base;h=89825ae4baac1bbe0eb51032d53326c5e3bec09a;hb=7236d2bfe0acc48330e3c2a3dfac4ada9a792cd8;hp=1168d6edf515f9539dc72c266e8c7476e0fc99b3;hpb=b81f5fa27f3a6a1e3d6b06f4517beb8c37b3c657;p=dpdk.git

diff --git a/config/common_base b/config/common_base
index 1168d6edf5..89825ae4ba 100644
--- a/config/common_base
+++ b/config/common_base
@@ -96,6 +96,7 @@ CONFIG_RTE_MAX_TAILQ=32
 CONFIG_RTE_LOG_LEVEL=RTE_LOG_INFO
 CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
 CONFIG_RTE_LOG_HISTORY=256
+CONFIG_RTE_BACKTRACE=y
 CONFIG_RTE_LIBEAL_USE_HPET=n
 CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
 CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
@@ -103,6 +104,14 @@ CONFIG_RTE_EAL_IGB_UIO=n
 CONFIG_RTE_EAL_VFIO=n
 CONFIG_RTE_MALLOC_DEBUG=n
 
+#
+# Recognize/ignore the AVX/AVX512 CPU flags for performance/power testing.
+# AVX512 is marked as experimental for now, will enable it after enough
+# field test and possible optimization.
+#
+CONFIG_RTE_ENABLE_AVX=y
+CONFIG_RTE_ENABLE_AVX512=n
+
 # Default driver path (or "" to disable)
 CONFIG_RTE_EAL_PMD_PATH=""
 
@@ -130,7 +139,7 @@ CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
 #
 # Turn off Tx preparation stage
 #
-# Warning: rte_ethdev_tx_prepare() can be safely disabled only if using a
+# Warning: rte_eth_tx_prepare() can be safely disabled only if using a
 # driver which do not implement any Tx preparation.
 #
 CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
@@ -231,7 +240,7 @@ CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
 CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
 
 #
-# Compile burst-oriented Chelsio Terminator 10GbE/40GbE (CXGBE) PMD
+# Compile burst-oriented Chelsio Terminator (CXGBE) PMD
 #
 CONFIG_RTE_LIBRTE_CXGBE_PMD=y
 CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
@@ -239,12 +248,14 @@ CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_CXGBE_TPUT=y
 
 #
 # Compile burst-oriented Cisco ENIC PMD driver
 #
 CONFIG_RTE_LIBRTE_ENIC_PMD=y
 CONFIG_RTE_LIBRTE_ENIC_DEBUG=n
+CONFIG_RTE_LIBRTE_ENIC_DEBUG_FLOW=n
 
 #
 # Compile burst-oriented Netronome NFP PMD driver
@@ -298,6 +309,27 @@ CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n
 CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n
 CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n
 
+#
+# Compile NXP DPAA2 FSL-MC Bus
+#
+CONFIG_RTE_LIBRTE_FSLMC_BUS=n
+
+#
+# Compile Support Libraries for NXP DPAA2
+#
+CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
+CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
+
+#
+# Compile burst-oriented NXP DPAA2 PMD driver
+#
+CONFIG_RTE_LIBRTE_DPAA2_PMD=n
+CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
+CONFIG_RTE_LIBRTE_DPAA2_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX_FREE=n
+
 #
 # Compile burst-oriented VIRTIO PMD driver
 #
@@ -413,6 +445,14 @@ CONFIG_RTE_CRYPTODEV_NAME_LEN=64
 CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
 CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
 
+#
+# Compile NXP DPAA2 crypto sec driver for CAAM HW
+#
+CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
+CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_DRIVER=n
+CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_RX=n
+
 #
 # Compile PMD for QuickAssist based devices
 #