X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=doc%2Fguides%2Fbbdevs%2Ffpga_lte_fec.rst;h=c3379c24e343fdaca7942a64f19f851b210937e4;hb=82a153151f7d0983017b2639fb970e722d0a5a30;hp=e268e5b9dcd2aec02b3944e01d9dbbaff7c3da4b;hpb=db27370b57202632ad8830352c1c0ee2dde4542f;p=dpdk.git

diff --git a/doc/guides/bbdevs/fpga_lte_fec.rst b/doc/guides/bbdevs/fpga_lte_fec.rst
index e268e5b9dc..c3379c24e3 100644
--- a/doc/guides/bbdevs/fpga_lte_fec.rst
+++ b/doc/guides/bbdevs/fpga_lte_fec.rst
@@ -81,7 +81,7 @@ Bind PF UIO driver(s)
 Install the DPDK igb_uio driver, bind it with the PF PCI device ID and use
 ``lspci`` to confirm the PF device is under use by ``igb_uio`` DPDK UIO driver.
 
-The igb_uio driver may be bound to the PF PCI device using one of three methods:
+The igb_uio driver may be bound to the PF PCI device using one of two methods:
 
 
 1. PCI functions (physical or virtual, depending on the use case) can be bound to
@@ -104,20 +104,6 @@ the UIO driver by repeating this command for every function.
 where the PCI device ID (example: 0000:06:00.0) is obtained using lspci -vd1172:
 
 
-3. A third way to bind is to use ``dpdk-setup.sh`` tool
-
-.. code-block:: console
-
-  cd <dpdk-top-level-directory>
-  ./usertools/dpdk-setup.sh
-
-  select 'Bind Ethernet/Crypto/Baseband device to IGB UIO module'
-  or
-  select 'Bind Ethernet/Crypto/Baseband device to VFIO module' depending on driver required
-  enter PCI device ID
-  select 'Display current Ethernet/Crypto/Baseband device settings' to confirm binding
-
-
 In the same way the FPGA LTE FEC PF can be bound with vfio, but vfio driver does not
 support SR-IOV configuration right out of the box, so it will need to be patched.