X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=doc%2Fguides%2Fcryptodevs%2Fqat.rst;h=e905f6d00238185e09065a398925335688256584;hb=62012a76811ec1344231fee57a056bd1f5ab9dde;hp=581cd2f70295712ccd95363c4d1ca0def12222f5;hpb=655c901bf7345e2eb7e2bb603a6c30ac6feff3c9;p=dpdk.git diff --git a/doc/guides/cryptodevs/qat.rst b/doc/guides/cryptodevs/qat.rst index 581cd2f702..e905f6d002 100644 --- a/doc/guides/cryptodevs/qat.rst +++ b/doc/guides/cryptodevs/qat.rst @@ -1,48 +1,35 @@ -.. BSD LICENSE - Copyright(c) 2015-2016 Intel Corporation. All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - * Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - * Neither the name of Intel Corporation nor the names of its - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +.. SPDX-License-Identifier: BSD-3-Clause + Copyright(c) 2015-2019 Intel Corporation. Intel(R) QuickAssist (QAT) Crypto Poll Mode Driver ================================================== -The QAT PMD provides poll mode crypto driver support for the following -hardware accelerator devices: +QAT documentation consists of three parts: + +* Details of the symmetric and asymmetric crypto services below. +* Details of the `compression service `_ + in the compressdev drivers section. +* Details of building the common QAT infrastructure and the PMDs to support the + above services. See :ref:`building_qat` below. + + +Symmetric Crypto Service on QAT +------------------------------- + +The QAT symmetric crypto PMD (hereafter referred to as `QAT SYM [PMD]`) provides +poll mode crypto driver support for the following hardware accelerator devices: * ``Intel QuickAssist Technology DH895xCC`` * ``Intel QuickAssist Technology C62x`` * ``Intel QuickAssist Technology C3xxx`` * ``Intel QuickAssist Technology D15xx`` +* ``Intel QuickAssist Technology C4xxx`` Features --------- +~~~~~~~~ -The QAT PMD has support for: +The QAT SYM PMD has support for: Cipher algorithms: @@ -54,6 +41,7 @@ Cipher algorithms: * ``RTE_CRYPTO_CIPHER_AES128_CTR`` * ``RTE_CRYPTO_CIPHER_AES192_CTR`` * ``RTE_CRYPTO_CIPHER_AES256_CTR`` +* ``RTE_CRYPTO_CIPHER_AES_XTS`` * ``RTE_CRYPTO_CIPHER_SNOW3G_UEA2`` * ``RTE_CRYPTO_CIPHER_NULL`` * ``RTE_CRYPTO_CIPHER_KASUMI_F8`` @@ -76,65 +64,265 @@ Hash algorithms: * ``RTE_CRYPTO_AUTH_KASUMI_F9`` * ``RTE_CRYPTO_AUTH_AES_GMAC`` * ``RTE_CRYPTO_AUTH_ZUC_EIA3`` +* ``RTE_CRYPTO_AUTH_AES_CMAC`` Supported AEAD algorithms: * ``RTE_CRYPTO_AEAD_AES_GCM`` +* ``RTE_CRYPTO_AEAD_AES_CCM`` Limitations ------------ +~~~~~~~~~~~ * Only supports the session-oriented API implementation (session-less APIs are not supported). * SNOW 3G (UEA2), KASUMI (F8) and ZUC (EEA3) supported only if cipher length and offset fields are byte-multiple. * SNOW 3G (UIA2) and ZUC (EIA3) supported only if hash length and offset fields are byte-multiple. * No BSD support as BSD QAT kernel driver not available. * ZUC EEA3/EIA3 is not supported by dh895xcc devices -* Maximum additional authenticated data (AAD) for GCM is 240 bytes long. +* Maximum additional authenticated data (AAD) for GCM is 240 bytes long and must be passed to the device in a buffer rounded up to the nearest block-size multiple (x16) and padded with zeros. * Queue pairs are not thread-safe (that is, within a single queue pair, RX and TX from different lcores is not supported). +Extra notes on KASUMI F9 +~~~~~~~~~~~~~~~~~~~~~~~~ + +When using KASUMI F9 authentication algorithm, the input buffer must be +constructed according to the +`3GPP KASUMI specification `_ +(section 4.4, page 13). The input buffer has to have COUNT (4 bytes), +FRESH (4 bytes), MESSAGE and DIRECTION (1 bit) concatenated. After the DIRECTION +bit, a single '1' bit is appended, followed by between 0 and 7 '0' bits, so that +the total length of the buffer is multiple of 8 bits. Note that the actual +message can be any length, specified in bits. + +Once this buffer is passed this way, when creating the crypto operation, +length of data to authenticate "op.sym.auth.data.length" must be the length +of all the items described above, including the padding at the end. +Also, offset of data to authenticate "op.sym.auth.data.offset" +must be such that points at the start of the COUNT bytes. + +Asymmetric Crypto Service on QAT +-------------------------------- + +The QAT asymmetric crypto PMD (hereafter referred to as `QAT ASYM [PMD]`) provides +poll mode crypto driver support for the following hardware accelerator devices: + +* ``Intel QuickAssist Technology DH895xCC`` +* ``Intel QuickAssist Technology C62x`` +* ``Intel QuickAssist Technology C3xxx`` +* ``Intel QuickAssist Technology D15xx`` +* ``Intel QuickAssist Technology C4xxx`` + +The QAT ASYM PMD has support for: + +* ``RTE_CRYPTO_ASYM_XFORM_MODEX`` +* ``RTE_CRYPTO_ASYM_XFORM_MODINV`` + +Limitations +~~~~~~~~~~~ + +* Big integers longer than 4096 bits are not supported. +* Queue pairs are not thread-safe (that is, within a single queue pair, RX and TX from different lcores is not supported). + +.. _building_qat: + +Building PMDs on QAT +-------------------- + +A QAT device can host multiple acceleration services: -Installation ------------- +* symmetric cryptography +* data compression +* asymmetric cryptography -To enable QAT in DPDK, follow the instructions for modifying the compile-time -configuration file as described `here `_. +These services are provided to DPDK applications via PMDs which register to +implement the corresponding cryptodev and compressdev APIs. The PMDs use +common QAT driver code which manages the QAT PCI device. They also depend on a +QAT kernel driver being installed on the platform, see :ref:`qat_kernel` below. -Quick instructions are as follows: + +Configuring and Building the DPDK QAT PMDs +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + + +Further information on configuring, building and installing DPDK is described +`here `_. + + +Quick instructions for QAT cryptodev PMD are as follows: .. code-block:: console cd to the top-level DPDK directory - make config T=x86_64-native-linuxapp-gcc - sed -i 's,\(CONFIG_RTE_LIBRTE_PMD_QAT\)=n,\1=y,' build/.config + make defconfig + sed -i 's,\(CONFIG_RTE_LIBRTE_PMD_QAT_SYM\)=n,\1=y,' build/.config + or/and + sed -i 's,\(CONFIG_RTE_LIBRTE_PMD_QAT_ASYM\)=n,\1=y,' build/.config make -To use the DPDK QAT PMD an SRIOV-enabled QAT kernel driver is required. The VF -devices exposed by this driver will be used by the QAT PMD. The devices and -available kernel drivers and device ids are : +Quick instructions for QAT compressdev PMD are as follows: + +.. code-block:: console + + cd to the top-level DPDK directory + make defconfig + make + + +.. _building_qat_config: + +Build Configuration +~~~~~~~~~~~~~~~~~~~ + +These are the build configuration options affecting QAT, and their default values: + +.. code-block:: console + + CONFIG_RTE_LIBRTE_PMD_QAT=y + CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n + CONFIG_RTE_LIBRTE_PMD_QAT_ASYM=n + CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48 + CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536 + +CONFIG_RTE_LIBRTE_PMD_QAT must be enabled for any QAT PMD to be built. + +Both QAT SYM PMD and QAT ASYM PMD have an external dependency on libcrypto, so are not +built by default. CONFIG_RTE_LIBRTE_PMD_QAT_SYM/ASYM should be enabled to build them. + +The QAT compressdev PMD has no external dependencies, so needs no configuration +options and is built by default. + +The number of VFs per PF varies - see table below. If multiple QAT packages are +installed on a platform then CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES should be +adjusted to the number of VFs which the QAT common code will need to handle. + +.. Note:: + + There are separate config items (not QAT-specific) for max cryptodevs + CONFIG_RTE_CRYPTO_MAX_DEVS and max compressdevs CONFIG_RTE_COMPRESS_MAX_DEVS, + if necessary these should be adjusted to handle the total of QAT and other + devices which the process will use. In particular for crypto, where each + QAT VF may expose two crypto devices, sym and asym, it may happen that the + number of devices will be bigger than MAX_DEVS and the process will show an error + during PMD initialisation. To avoid this problem CONFIG_RTE_CRYPTO_MAX_DEVS may be + increased or -w, pci-whitelist domain:bus:devid:func option may be used. + + +QAT compression PMD needs intermediate buffers to support Deflate compression +with Dynamic Huffman encoding. CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE +specifies the size of a single buffer, the PMD will allocate a multiple of these, +plus some extra space for associated meta-data. For GEN2 devices, 20 buffers are +allocated while for GEN1 devices, 12 buffers are allocated, plus 1472 bytes overhead. + +.. Note:: + + If the compressed output of a Deflate operation using Dynamic Huffman + Encoding is too big to fit in an intermediate buffer, then the + operation will fall back to fixed compression rather than failing the operation. + To avoid this less performant case, applications should configure + the intermediate buffer size to be larger than the expected input data size + (compressed output size is usually unknown, so the only option is to make + larger than the input size). + + +Device and driver naming +~~~~~~~~~~~~~~~~~~~~~~~~ + +* The qat cryptodev symmetric crypto driver name is "crypto_qat". +* The qat cryptodev asymmetric crypto driver name is "crypto_qat_asym". + +The "rte_cryptodev_devices_get()" returns the devices exposed by either of these drivers. + +* Each qat sym crypto device has a unique name, in format + "_", e.g. "0000:41:01.0_qat_sym". +* Each qat asym crypto device has a unique name, in format + "_", e.g. "0000:41:01.0_qat_asym". + This name can be passed to "rte_cryptodev_get_dev_id()" to get the device_id. + +.. Note:: + + The cryptodev driver name is passed to the dpdk-test-crypto-perf tool in the "-devtype" parameter. + + The qat crypto device name is in the format of the slave parameter passed to the crypto scheduler. + +* The qat compressdev driver name is "compress_qat". + The rte_compressdev_devices_get() returns the devices exposed by this driver. + +* Each qat compression device has a unique name, in format + _, e.g. "0000:41:01.0_qat_comp". + This name can be passed to rte_compressdev_get_dev_id() to get the device_id. + +.. _qat_kernel: + +Dependency on the QAT kernel driver +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +To use QAT an SRIOV-enabled QAT kernel driver is required. The VF +devices created and initialised by this driver will be used by the QAT PMDs. + +Instructions for installation are below, but first an explanation of the +relationships between the PF/VF devices and the PMDs visible to +DPDK applications. + +Each QuickAssist PF device exposes a number of VF devices. Each VF device can +enable one symmetric cryptodev PMD and/or one asymmetric cryptodev PMD and/or +one compressdev PMD. +These QAT PMDs share the same underlying device and pci-mgmt code, but are +enumerated independently on their respective APIs and appear as independent +devices to applications. + +.. Note:: + + Each VF can only be used by one DPDK process. It is not possible to share + the same VF across multiple processes, even if these processes are using + different acceleration services. + + Conversely one DPDK process can use one or more QAT VFs and can expose both + cryptodev and compressdev instances on each of those VFs. + + +Available kernel drivers +~~~~~~~~~~~~~~~~~~~~~~~~ + +Kernel drivers for each device for each service are listed in the following table. (Scroll right +to see the full table) + .. _table_qat_pmds_drivers: .. table:: QAT device generations, devices and drivers - +-----+----------+--------+---------------+------------+--------+------+--------+--------+ - | Gen | Device | Driver | Kernel Module | Pci Driver | PF Did | #PFs | Vf Did | VFs/PF | - +=====+==========+========+===============+============+========+======+========+========+ - | 1 | DH895xCC | 01.org | icp_qa_al | n/a | 435 | 1 | 443 | 32 | - +-----+----------+--------+---------------+------------+--------+------+--------+--------+ - | 1 | DH895xCC | 4.4+ | qat_dh895xcc | dh895xcc | 435 | 1 | 443 | 32 | - +-----+----------+--------+---------------+------------+--------+------+--------+--------+ - | 2 | C62x | 4.5+ | qat_c62x | c6xx | 37c8 | 3 | 37c9 | 16 | - +-----+----------+--------+---------------+------------+--------+------+--------+--------+ - | 2 | C3xxx | 4.5+ | qat_c3xxx | c3xxx | 19e2 | 1 | 19e3 | 16 | - +-----+----------+--------+---------------+------------+--------+------+--------+--------+ - | 2 | D15xx | p | qat_d15xx | d15xx | 6f54 | 1 | 6f55 | 16 | - +-----+----------+--------+---------------+------------+--------+------+--------+--------+ - + +-----+-----+-----+-----+----------+---------------+---------------+------------+--------+------+--------+--------+ + | S | A | C | Gen | Device | Driver/ver | Kernel Module | Pci Driver | PF Did | #PFs | VF Did | VFs/PF | + +=====+=====+=====+=====+==========+===============+===============+============+========+======+========+========+ + | Yes | No | No | 1 | DH895xCC | linux/4.4+ | qat_dh895xcc | dh895xcc | 435 | 1 | 443 | 32 | + +-----+-----+-----+-----+----------+---------------+---------------+------------+--------+------+--------+--------+ + | Yes | Yes | No | " | " | 01.org/4.2.0+ | " | " | " | " | " | " | + +-----+-----+-----+-----+----------+---------------+---------------+------------+--------+------+--------+--------+ + | Yes | Yes | Yes | " | " | 01.org/4.3.0+ | " | " | " | " | " | " | + +-----+-----+-----+-----+----------+---------------+---------------+------------+--------+------+--------+--------+ + | Yes | No | No | 2 | C62x | linux/4.5+ | qat_c62x | c6xx | 37c8 | 3 | 37c9 | 16 | + +-----+-----+-----+-----+----------+---------------+---------------+------------+--------+------+--------+--------+ + | Yes | Yes | Yes | " | " | 01.org/4.2.0+ | " | " | " | " | " | " | + +-----+-----+-----+-----+----------+---------------+---------------+------------+--------+------+--------+--------+ + | Yes | No | No | 2 | C3xxx | linux/4.5+ | qat_c3xxx | c3xxx | 19e2 | 1 | 19e3 | 16 | + +-----+-----+-----+-----+----------+---------------+---------------+------------+--------+------+--------+--------+ + | Yes | Yes | Yes | " | " | 01.org/4.2.0+ | " | " | " | " | " | " | + +-----+-----+-----+-----+----------+---------------+---------------+------------+--------+------+--------+--------+ + | Yes | No | No | 2 | D15xx | p | qat_d15xx | d15xx | 6f54 | 1 | 6f55 | 16 | + +-----+-----+-----+-----+----------+---------------+---------------+------------+--------+------+--------+--------+ + | Yes | No | No | 3 | C4xxx | p | qat_c4xxx | c4xxx | 18a0 | 1 | 18a1 | 128 | + +-----+-----+-----+-----+----------+---------------+---------------+------------+--------+------+--------+--------+ + +The first 3 columns indicate the service: + +* S = Symmetric crypto service (via cryptodev API) +* A = Asymmetric crypto service (via cryptodev API) +* C = Compression service (via compressdev API) The ``Driver`` column indicates either the Linux kernel version in which support for this device was introduced or a driver available on Intel's 01.org -website. There are both linux and 01.org kernel drivers available for some +website. There are both linux in-tree and 01.org kernel drivers available for some devices. p = release pending. If you are running on a kernel which includes a driver for your device, see @@ -143,7 +331,7 @@ If you are running on a kernel which includes a driver for your device, see Installation using kernel.org driver ------------------------------------- +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The examples below are based on the C62x device, if you have a different device use the corresponding values in the above table. @@ -167,7 +355,7 @@ Next, you need to expose the Virtual Functions (VFs) using the sysfs file system First find the BDFs (Bus-Device-Function) of the physical functions (PFs) of your device, e.g.:: - lspci -d : 37c8 + lspci -d:37c8 You should see output similar to:: @@ -214,7 +402,7 @@ To complete the installation follow the instructions in Installation using 01.org QAT driver ------------------------------------- +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Download the latest QuickAssist Technology Driver from `01.org `_. @@ -222,9 +410,9 @@ Consult the *Getting Started Guide* at the same URL for further information. The steps below assume you are: -* Building on a platform with one ``DH895xCC`` device. -* Using package ``qatmux.l.2.3.0-34.tgz``. -* On Fedora21 kernel ``3.17.4-301.fc21.x86_64``. +* Building on a platform with one ``C62x`` device. +* Using package ``qat1.7.l.4.2.0-000xx.tar.gz``. +* On Fedora26 kernel ``4.11.11-300.fc26.x86_64``. In the BIOS ensure that SRIOV is enabled and VT-d is disabled. @@ -232,21 +420,30 @@ Uninstall any existing QAT driver, for example by running: * ``./installer.sh uninstall`` in the directory where originally installed. -* or ``rmmod qat_dh895xcc; rmmod intel_qat``. Build and install the SRIOV-enabled QAT driver:: mkdir /QAT cd /QAT - # Copy qatmux.l.2.3.0-34.tgz to this location - tar zxof qatmux.l.2.3.0-34.tgz + # Copy the package to this location and unpack + tar zxof qat1.7.l.4.2.0-000xx.tar.gz + + ./configure --enable-icp-sriov=host + make install + +You can use ``cat /sys/kernel/debug/qat/version/fw`` to confirm the driver is correctly installed and is using firmware version 4.2.0. +You can use ``lspci -d:37c9`` to confirm the presence of the 16 VF devices available per ``C62x`` PF. + +Confirm the driver is correctly installed and is using firmware version 4.2.0:: + + cat /sys/kernel/debug/qat/version/fw + - export ICP_WITHOUT_IOMMU=1 - ./installer.sh install QAT1.6 host +Confirm the presence of 48 VF devices - 16 per PF:: + + lspci -d:37c9 -You can use ``cat /proc/icp_dh895xcc_dev0/version`` to confirm the driver is correctly installed. -You can use ``lspci -d:443`` to confirm the of the 32 VF devices available per ``DH895xCC`` device. To complete the installation - follow instructions in `Binding the available VFs to the DPDK UIO driver`_. @@ -287,6 +484,7 @@ To complete the installation - follow instructions in `Binding the available VFs sudo yum install zlib-devel sudo yum install openssl-devel + sudo yum install libudev-devel .. Note:: @@ -298,12 +496,12 @@ To complete the installation - follow instructions in `Binding the available VFs Binding the available VFs to the DPDK UIO driver ------------------------------------------------- +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Unbind the VFs from the stock driver so they can be bound to the uio driver. For an Intel(R) QuickAssist Technology DH895xCC device -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The unbind command below assumes ``BDFs`` of ``03:01.00-03:04.07``, if your VFs are different adjust the unbind command below:: @@ -316,7 +514,7 @@ VFs are different adjust the unbind command below:: done For an Intel(R) QuickAssist Technology C62x device -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The unbind command below assumes ``BDFs`` of ``1a:01.00-1a:02.07``, ``3d:01.00-3d:02.07`` and ``3f:01.00-3f:02.07``, if your VFs are different @@ -336,7 +534,7 @@ adjust the unbind command below:: done For Intel(R) QuickAssist Technology C3xxx or D15xx device -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The unbind command below assumes ``BDFs`` of ``01:01.00-01:02.07``, if your VFs are different adjust the unbind command below:: @@ -349,7 +547,7 @@ VFs are different adjust the unbind command below:: done Bind to the DPDK uio driver -~~~~~~~~~~~~~~~~~~~~~~~~~~~ +^^^^^^^^^^^^^^^^^^^^^^^^^^^ Install the DPDK igb_uio driver, bind the VF PCI Device id to it and use lspci to confirm the VF devices are now in use by igb_uio kernel driver, @@ -368,20 +566,57 @@ Another way to bind the VFs to the DPDK UIO driver is by using the cd to the top-level DPDK directory ./usertools/dpdk-devbind.py -b igb_uio 0000:03:01.1 +Testing +~~~~~~~ -Extra notes on KASUMI F9 ------------------------- +QAT SYM crypto PMD can be tested by running the test application:: -When using KASUMI F9 authentication algorithm, the input buffer must be -constructed according to the 3GPP KASUMI specifications (section 4.4, page 13): -``_. -Input buffer has to have COUNT (4 bytes), FRESH (4 bytes), MESSAGE and DIRECTION (1 bit) -concatenated. After the DIRECTION bit, a single '1' bit is appended, followed by -between 0 and 7 '0' bits, so that the total length of the buffer is multiple of 8 bits. -Note that the actual message can be any length, specified in bits. + make defconfig + make -j + cd ./build/app + ./test -l1 -n1 -w + RTE>>cryptodev_qat_autotest -Once this buffer is passed this way, when creating the crypto operation, -length of data to authenticate (op.sym.auth.data.length) must be the length -of all the items described above, including the padding at the end. -Also, offset of data to authenticate (op.sym.auth.data.offset) -must be such that points at the start of the COUNT bytes. +QAT ASYM crypto PMD can be tested by running the test application:: + + make defconfig + make -j + cd ./build/app + ./test -l1 -n1 -w + RTE>>cryptodev_qat_asym_autotest + +QAT compression PMD can be tested by running the test application:: + + make defconfig + sed -i 's,\(CONFIG_RTE_COMPRESSDEV_TEST\)=n,\1=y,' build/.config + make -j + cd ./build/app + ./test -l1 -n1 -w + RTE>>compressdev_autotest + + +Debugging +~~~~~~~~~ + +There are 2 sets of trace available via the dynamic logging feature: + +* pmd.qat_dp exposes trace on the data-path. +* pmd.qat_general exposes all other trace. + +pmd.qat exposes both sets of traces. +They can be enabled using the log-level option (where 8=maximum log level) on +the process cmdline, e.g. using any of the following:: + + --log-level="pmd.qat_general,8" + --log-level="pmd.qat_dp,8" + --log-level="pmd.qat,8" + +.. Note:: + + The global RTE_LOG_DP_LEVEL overrides data-path trace so must be set to + RTE_LOG_DEBUG to see all the trace. This variable is in config/rte_config.h + for meson build and config/common_base for gnu make. + Also the dynamic global log level overrides both sets of trace, so e.g. no + QAT trace would display in this case:: + + --log-level="7" --log-level="pmd.qat_general,8"