X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=doc%2Fguides%2Fnics%2Fi40e.rst;h=20c998398c87f5a3adbac02b35b5cf342f715528;hb=eb0e12c0c2991b3e12ee015db8f86355f38dcffc;hp=828a25988e3408581938adbb3343f4b1fc932ab5;hpb=1be514fbcea9e8964296b46c91dbb56715503ae7;p=dpdk.git

diff --git a/doc/guides/nics/i40e.rst b/doc/guides/nics/i40e.rst
index 828a25988e..20c998398c 100644
--- a/doc/guides/nics/i40e.rst
+++ b/doc/guides/nics/i40e.rst
@@ -88,6 +88,8 @@ For X710/XL710/XXV710,
    +--------------+-----------------------+------------------+
    | DPDK version | Kernel driver version | Firmware version |
    +==============+=======================+==================+
+   |    20.11     |         2.13.10       |       8.00       |
+   +--------------+-----------------------+------------------+
    |    20.08     |         2.12.6        |       7.30       |
    +--------------+-----------------------+------------------+
    |    20.05     |         2.11.27       |       7.30       |
@@ -131,6 +133,8 @@ For X722,
    +--------------+-----------------------+------------------+
    | DPDK version | Kernel driver version | Firmware version |
    +==============+=======================+==================+
+   |    20.11     |         2.13.10       |       5.00       |
+   +--------------+-----------------------+------------------+
    |    20.08     |         2.12.6        |       4.11       |
    +--------------+-----------------------+------------------+
    |    20.05     |         2.11.27       |       4.11       |
@@ -172,7 +176,7 @@ Runtime Config Options
 
   The number of reserved queue per VF is determined by its host PF. If the
   PCI address of an i40e PF is aaaa:bb.cc, the number of reserved queues per
-  VF can be configured with EAL parameter like -w aaaa:bb.cc,queue-num-per-vf=n.
+  VF can be configured with EAL parameter like -a aaaa:bb.cc,queue-num-per-vf=n.
   The value n can be 1, 2, 4, 8 or 16. If no such parameter is configured, the
   number of reserved queues per VF is 4 by default. If VF request more than
   reserved queues per VF, PF will able to allocate max to 16 queues after a VF
@@ -185,7 +189,7 @@ Runtime Config Options
   Adapter with both Linux kernel and DPDK PMD. To fix this issue, ``devargs``
   parameter ``support-multi-driver`` is introduced, for example::
 
-    -w 84:00.0,support-multi-driver=1
+    -a 84:00.0,support-multi-driver=1
 
   With the above configuration, DPDK PMD will not change global registers, and
   will switch PF interrupt from IntN to Int0 to avoid interrupt conflict between
@@ -200,20 +204,11 @@ Runtime Config Options
   port representors for on initialization of the PF PMD by passing the VF IDs of
   the VFs which are required.::
 
-  -w DBDF,representor=[0,1,4]
+  -a DBDF,representor=[0,1,4]
 
   Currently hot-plugging of representor ports is not supported so all required
   representors must be specified on the creation of the PF.
 
-- ``Use latest supported vector`` (default ``disable``)
-
-  Latest supported vector path may not always get the best perf so vector path was
-  recommended to use only on later platform. But users may want the latest vector path
-  since it can get better perf in some real work loading cases. So ``devargs`` param
-  ``use-latest-supported-vec`` is introduced, for example::
-
-  -w 84:00.0,use-latest-supported-vec=1
-
 - ``Enable validation for VF message`` (default ``not enabled``)
 
   The PF counts messages from each VF. If in any period of seconds the message
@@ -222,7 +217,7 @@ Runtime Config Options
   Format -- "maximal-message@period-seconds:ignore-seconds"
   For example::
 
-  -w 84:00.0,vf_msg_cfg=80@120:180
+  -a 84:00.0,vf_msg_cfg=80@120:180
 
 Vector RX Pre-conditions
 ~~~~~~~~~~~~~~~~~~~~~~~~
@@ -452,7 +447,7 @@ no physical uplink on the associated NIC port.
 To enable this feature, the user should pass a ``devargs`` parameter to the
 EAL, for example::
 
-    -w 84:00.0,enable_floating_veb=1
+    -a 84:00.0,enable_floating_veb=1
 
 In this configuration the PMD will use the floating VEB feature for all the
 VFs created by this PF device.
@@ -460,7 +455,7 @@ VFs created by this PF device.
 Alternatively, the user can specify which VFs need to connect to this floating
 VEB using the ``floating_veb_list`` argument::
 
-    -w 84:00.0,enable_floating_veb=1,floating_veb_list=1;3-4
+    -a 84:00.0,enable_floating_veb=1,floating_veb_list=1;3-4
 
 In this example ``VF1``, ``VF3`` and ``VF4`` connect to the floating VEB,
 while other VFs connect to the normal VEB.
@@ -558,9 +553,9 @@ Generic flow API
 - ``RSS Flow``
 
   RSS Flow supports to set hash input set, hash function, enable hash
-  and configure queue region.
+  and configure queues.
   For example:
-  Configure queue region as queue 0, 1, 2, 3.
+  Configure queues as queue 0, 1, 2, 3.
 
   .. code-block:: console
 
@@ -796,7 +791,7 @@ See :numref:`figure_intel_perf_test_setup` for the performance test setup.
 
 7. The command line of running l3fwd would be something like the following::
 
-      ./dpdk-l3fwd -l 18-21 -n 4 -w 82:00.0 -w 85:00.0 \
+      ./dpdk-l3fwd -l 18-21 -n 4 -a 82:00.0 -a 85:00.0 \
               -- -p 0x3 --config '(0,0,18),(0,1,19),(1,0,20),(1,1,21)'
 
    This means that the application uses core 18 for port 0, queue pair 0 forwarding, core 19 for port 0, queue pair 1 forwarding,