X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=doc%2Fguides%2Fnics%2Figc.rst;h=da77e0845ef33110a754bfac792a076b41152ae3;hb=6be6690127744bb294005bfcf539508b3d5f389e;hp=389c7804c4ecc2dedb997b5fe6c6330a15e77293;hpb=5f266d0d8c6decb07fef3d6a6f828bcc75f5fefe;p=dpdk.git

diff --git a/doc/guides/nics/igc.rst b/doc/guides/nics/igc.rst
index 389c7804c4..da77e0845e 100644
--- a/doc/guides/nics/igc.rst
+++ b/doc/guides/nics/igc.rst
@@ -4,26 +4,11 @@
 IGC Poll Mode Driver
 ======================
 
-The IGC PMD (librte_pmd_igc) provides poll mode driver support for Foxville
+The IGC PMD (**librte_net_igc**) provides poll mode driver support for Foxville
 I225 Series Network Adapters.
 
-- For information about I225, please refer to:
-  `https://ark.intel.com/content/www/us/en/ark/products/series/184686/
-  intel-ethernet-controller-i225-series.html`
-
-Config File Options
-~~~~~~~~~~~~~~~~~~~
-
-The following options can be modified in the ``config`` file.
-Please note that enabling debugging options may affect system performance.
-
-- ``CONFIG_RTE_LIBRTE_IGC_PMD`` (default ``y``)
-
-  Toggle compilation of the ``librte_pmd_igc`` driver.
-
-- ``CONFIG_RTE_LIBRTE_IGC_DEBUG_*`` (default ``n``)
-
-  Toggle display of generic debugging messages.
+- For information about I225, please refer to: `Intel® Ethernet Controller I225 Series
+  <https://ark.intel.com/content/www/us/en/ark/products/series/184686/intel-ethernet-controller-i225-series.html>`_.
 
 
 Driver compilation and testing
@@ -67,7 +52,7 @@ outer VLAN to 0x9100:
 
 .. code-block:: console
 
-   ./app/testpmd -l 4-8 -- -i
+   ./app/dpdk-testpmd -l 4-8 -- -i
    ...
 
    testpmd> vlan set filter on 0
@@ -75,3 +60,47 @@ outer VLAN to 0x9100:
    testpmd> vlan set strip off 0
    testpmd> vlan set extend on 0
    testpmd> vlan set outer tpid 0x9100 0
+
+
+Flow Director
+~~~~~~~~~~~~~
+
+The Flow Director works in receive mode to identify specific flows or sets of flows and route
+them to specific queues.
+
+The Flow Director filters includes the following types:
+
+- ether-type filter
+- 2-tuple filter(destination L4 protocol and destination L4 port)
+- TCP SYN filter
+- RSS filter
+
+Start ``testpmd``:
+
+.. code-block:: console
+
+   ./dpdk-testpmd -l 4-8 -- i --rxq=4 --txq=4 --pkt-filter-mode=perfect --disable-rss
+
+Add a rule to direct packet whose ``ether-type=0x801`` to queue 1:
+
+.. code-block:: console
+
+   testpmd> flow create 0 ingress pattern eth type is 0x801 / end actions queue index 1 / end
+
+Add a rule to direct packet whose ``ip-protocol=0x6(TCP), tcp_port=0x80`` to queue 1:
+
+.. code-block:: console
+
+   testpmd> flow create 0 ingress pattern eth / ipv4 proto is 6 / tcp dst is 0x80 / end actions queue index 1 / end
+
+Add a rule to direct packet whose ``ip-protocol=0x6(TCP), SYN flag is set`` to queue 1:
+
+.. code-block:: console
+
+   testpmd> flow validate 0 ingress pattern tcp flags spec 0x02 flags mask 0x02 / end actions queue index 1 / end
+
+Add a rule to enable ipv4-udp RSS:
+
+.. code-block:: console
+
+   testpmd> flow create 0 ingress pattern end actions rss types ipv4-udp end / end