X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=doc%2Fguides%2Fnics%2Fmlx4.rst;h=22341b904d625f9d1ce78bc080bc21644e1bcf84;hb=8cfe3aaf34934a15610ea7a811312a47fa0e0a14;hp=7c431778bca7cfff95f8f4b871b8e356ccda2285;hpb=b280c98f70719285d3f1b6516813f63fe4173875;p=dpdk.git
diff --git a/doc/guides/nics/mlx4.rst b/doc/guides/nics/mlx4.rst
index 7c431778bc..22341b904d 100644
--- a/doc/guides/nics/mlx4.rst
+++ b/doc/guides/nics/mlx4.rst
@@ -74,13 +74,6 @@ long as they share the same MAC address.
Compiling librte_pmd_mlx4 causes DPDK to be linked against libibverbs.
-Features
---------
-
-- Multi arch support: x86_64 and POWER8.
-- Link state information is provided.
-- RX interrupts.
-
Configuration
-------------
@@ -160,7 +153,7 @@ This driver relies on external libraries and kernel drivers for resources
allocations and initialization. The following dependencies are not part of
DPDK and must be installed separately:
-- **libibverbs**
+- **libibverbs** (provided by rdma-core package)
User space verbs framework used by librte_pmd_mlx4. This library provides
a generic interface between the kernel and low-level user space drivers
@@ -170,7 +163,7 @@ DPDK and must be installed separately:
resources allocations) to be managed by the kernel and fast operations to
never leave user space.
-- **libmlx4**
+- **libmlx4** (provided by rdma-core package)
Low-level user space driver library for Mellanox ConnectX-3 devices,
it is automatically loaded by libibverbs.
@@ -178,7 +171,7 @@ DPDK and must be installed separately:
This library basically implements send/receive calls to the hardware
queues.
-- **Kernel modules** (mlnx-ofed-kernel)
+- **Kernel modules**
They provide the kernel-side verbs API and low level device drivers that
manage actual hardware initialization and resources sharing with user
@@ -204,24 +197,27 @@ DPDK and must be installed separately:
Both libraries are BSD and GPL licensed. Linux kernel modules are GPL
licensed.
-Currently supported by DPDK:
+Depending on system constraints and user preferences either RDMA core library
+with a recent enough Linux kernel release (recommended) or Mellanox OFED,
+which provides compatibility with older releases.
+
+Current RDMA core package and Linux kernel (recommended)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- Minimal Linux kernel version: 4.14.
+- Minimal RDMA core version: v15 (see `RDMA core installation documentation`_).
-- Mellanox OFED **4.1**.
-- Firmware version **2.36.5000** and above.
+.. _`RDMA core installation documentation`: https://raw.githubusercontent.com/linux-rdma/rdma-core/master/README.md
-Getting Mellanox OFED
-~~~~~~~~~~~~~~~~~~~~~
+.. _Mellanox_OFED_as_a_fallback:
-While these libraries and kernel modules are available on OpenFabrics
-Alliance's `website `_ and provided by package
-managers on most distributions, this PMD requires Ethernet extensions that
-may not be supported at the moment (this is a work in progress).
+Mellanox OFED as a fallback
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
-`Mellanox OFED
-`_
-includes the necessary support and should be used in the meantime. For DPDK,
-only libibverbs, libmlx4, mlnx-ofed-kernel packages and firmware updates are
-required from that distribution.
+- `Mellanox OFED`_ version: **4.2**.
+- firmware version: **2.42.5000** and above.
+
+.. _`Mellanox OFED`: http://www.mellanox.com/page/products_dyn?product_family=26&mtag=linux_sw_drivers
.. note::
@@ -229,15 +225,10 @@ required from that distribution.
this DPDK release was developed and tested against is strongly
recommended. Please check the `prerequisites`_.
-Supported NICs
---------------
+Installing Mellanox OFED
+^^^^^^^^^^^^^^^^^^^^^^^^
-* Mellanox(R) ConnectX(R)-3 Pro 40G MCX354A-FCC_Ax (2*40G)
-
-Quick Start Guide
------------------
-
-1. Download latest Mellanox OFED. For more info check the `prerequisites`_.
+1. Download latest Mellanox OFED.
2. Install the required libraries and kernel modules either by installing
only the required set, or by installing the entire Mellanox OFED:
@@ -246,19 +237,19 @@ Quick Start Guide
.. code-block:: console
- ./mlnxofedinstall
+ ./mlnxofedinstall --dpdk --upstream-libs
For SR-IOV hypervisors use:
.. code-block:: console
- ./mlnxofedinstall --enable-sriov -hypervisor
+ ./mlnxofedinstall --dpdk --upstream-libs --enable-sriov --hypervisor
For SR-IOV virtual machine use:
.. code-block:: console
- ./mlnxofedinstall --guest
+ ./mlnxofedinstall --dpdk --upstream-libs --guest
3. Verify the firmware is the correct one:
@@ -272,7 +263,19 @@ Quick Start Guide
connectx_port_config
- Or in the manual way:
+5. Continue with :ref:`section 2 of the Quick Start Guide `.
+
+Supported NICs
+--------------
+
+* Mellanox(R) ConnectX(R)-3 Pro 40G MCX354A-FCC_Ax (2*40G)
+
+.. _qsg:
+
+Quick Start Guide
+-----------------
+
+1. Set all ports links to Ethernet
.. code-block:: console
@@ -280,7 +283,15 @@ Quick Start Guide
echo eth > "/sys/bus/pci/devices/$PCI/mlx4_port0"
echo eth > "/sys/bus/pci/devices/$PCI/mlx4_port1"
-5. In case of bare metal or hypervisor, configure optimized steering mode
+ .. note::
+
+ If using Mellanox OFED one can permanently set the port link
+ to Ethernet using connectx_port_config tool provided by it.
+ :ref:`Mellanox_OFED_as_a_fallback`:
+
+.. _QSG_2:
+
+2. In case of bare metal or hypervisor, configure optimized steering mode
by adding the following line to ``/etc/modprobe.d/mlx4_core.conf``:
.. code-block:: console
@@ -292,7 +303,7 @@ Quick Start Guide
If VLAN filtering is used, set log_num_mgm_entry_size=-1.
Performance degradation can occur on this case.
-6. Restart the driver:
+3. Restart the driver:
.. code-block:: console
@@ -304,7 +315,7 @@ Quick Start Guide
service openibd restart
-7. Compile DPDK and you are ready to go. See instructions on
+4. Compile DPDK and you are ready to go. See instructions on
:ref:`Development Kit Build System `
Performance tuning