X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=doc%2Fguides%2Fnics%2Fsfc_efx.rst;h=5f35bc57f2bcdae91d11fb604796d83de293bc60;hb=a3f5252e5cbdabe3f65c6077c4e208d6100f3f74;hp=66daa1d36ac495966febc39564d32775bb86fe0b;hpb=390f9b8d82c9bb02b12efed1a810677082de2687;p=dpdk.git

diff --git a/doc/guides/nics/sfc_efx.rst b/doc/guides/nics/sfc_efx.rst
index 66daa1d36a..5f35bc57f2 100644
--- a/doc/guides/nics/sfc_efx.rst
+++ b/doc/guides/nics/sfc_efx.rst
@@ -66,7 +66,7 @@ SFC EFX PMD has support for:
 
 - Allmulticast mode
 
-- TCP segmentation offload (TSO)
+- TCP segmentation offload (TSO) including VXLAN and GENEVE encapsulated
 
 - Multicast MAC filter
 
@@ -82,6 +82,8 @@ SFC EFX PMD has support for:
 
 - Scattered Rx DMA for packet that are larger that a single Rx descriptor
 
+- Receive queue interrupts
+
 - Deferred receive and transmit queue start
 
 - Transmit VLAN insertion (if running firmware variant supports it)
@@ -96,8 +98,6 @@ Non-supported Features
 
 The features not yet supported include:
 
-- Receive queue interupts
-
 - Priority-based flow control
 
 - Configurable RX CRC stripping (always stripped)
@@ -201,14 +201,20 @@ Supported actions:
 
 - DROP
 
+- FLAG (supported only with ef10_essb Rx datapath)
+
+- MARK (supported only with ef10_essb Rx datapath)
+
 Validating flow rules depends on the firmware variant.
 
-Ethernet destinaton individual/group match
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The :ref:`flow_isolated_mode` is supported.
+
+Ethernet destination individual/group match
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 Ethernet item supports I/G matching, if only the corresponding bit is set
-in the mask of destination address. If destinaton address in the spec is
-multicast, it matches all multicast (and broadcast) packets, oherwise it
+in the mask of destination address. If destination address in the spec is
+multicast, it matches all multicast (and broadcast) packets, otherwise it
 matches unicast packets that are not filtered by other flow rules.
 
 Exceptions to flow rules
@@ -236,6 +242,10 @@ Supported NICs
 
    - Solarflare X2522 Dual Port SFP28 10/25GbE Adapter
 
+   - Solarflare X2541 Single Port QSFP28 10/25G/100G Adapter
+
+   - Solarflare X2542 Dual Port QSFP28 10/25G/100G Adapter
+
 - Solarflare Flareon [Ultra] Server Adapters:
 
    - Solarflare SFN8522 Dual Port SFP+ Server Adapter
@@ -314,7 +324,7 @@ boolean parameters value.
   **efx** chooses libefx-based datapath which supports Rx scatter.
   **ef10** chooses EF10 (SFN7xxx, SFN8xxx, X2xxx) native datapath which is
   more efficient than libefx-based and provides richer packet type
-  classification, but lacks Rx scatter support.
+  classification.
   **ef10_esps** chooses SFNX2xxx equal stride packed stream datapath
   which may be used on DPDK firmware variant only
   (see notes about its limitations above).
@@ -329,8 +339,7 @@ boolean parameters value.
   Mbuf segments may come from different mempools, and mbuf reference
   counters are treated responsibly.
   **ef10** chooses EF10 (SFN7xxx, SFN8xxx, X2xxx) native datapath which is
-  more efficient than libefx-based but has no VLAN insertion and TSO
-  support yet.
+  more efficient than libefx-based but has no VLAN insertion support yet.
   Mbuf segments may come from different mempools, and mbuf reference
   counters are treated responsibly.
   **ef10_simple** chooses EF10 (SFN7xxx, SFN8xxx, X2xxx) native datapath which
@@ -339,10 +348,10 @@ boolean parameters value.
 
 - ``perf_profile`` [auto|throughput|low-latency] (default **throughput**)
 
-  Choose hardware tunning to be optimized for either throughput or
+  Choose hardware tuning to be optimized for either throughput or
   low-latency.
   **auto** allows NIC firmware to make a choice based on
-  installed licences and firmware variant configured using **sfboot**.
+  installed licenses and firmware variant configured using **sfboot**.
 
 - ``stats_update_period_ms`` [long] (default **1000**)
 
@@ -354,7 +363,7 @@ boolean parameters value.
   value will select a fixed update period of **1000** milliseconds
 
 - ``fw_variant`` [dont-care|full-feature|ultra-low-latency|
-  capture-packed-stream] (default **dont-care**)
+  capture-packed-stream|dpdk] (default **dont-care**)
 
   Choose the preferred firmware variant to use. In order for the selected
   option to have an effect, the **sfboot** utility must be configured with the
@@ -367,6 +376,22 @@ boolean parameters value.
   **ultra-low-latency** chooses firmware with fewer features but lower latency.
   **capture-packed-stream** chooses firmware for SolarCapture packed stream
   mode.
+  **dpdk** chooses DPDK firmware with equal stride super-buffer Rx mode
+  for higher Rx packet rate and packet marks support and firmware subvariant
+  without checksumming on transmit for higher Tx packet rate if
+  checksumming is not required.
+
+- ``rxd_wait_timeout_ns`` [long] (default **200 us**)
+
+  Adjust timeout in nanoseconds to head-of-line block to wait for
+  Rx descriptors.
+  The accepted range is 0 to 400 ms.
+  Flow control should be enabled to make it work.
+  The value of **0** disables it and packets are dropped immediately.
+  When a packet is dropped because of no Rx descriptors,
+  ``rx_nodesc_drop_cnt`` counter grows.
+  The feature is supported only by the DPDK firmware variant when equal
+  stride super-buffer Rx mode is used.
 
 
 Dynamic Logging Parameters