X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=doc%2Fguides%2Fnics%2Fsfc_efx.rst;h=c02e1beda1e2ec86b60ef4316daa41792d0083f8;hb=6ce84bd889194b013fa597abcc6b8e00602dca58;hp=f2e410fea00342acfbb7101ef7555149e508f91d;hpb=a9825ccf5bb8873b2aef9c502d3a1ef9c8231ad2;p=dpdk.git

diff --git a/doc/guides/nics/sfc_efx.rst b/doc/guides/nics/sfc_efx.rst
index f2e410fea0..c02e1beda1 100644
--- a/doc/guides/nics/sfc_efx.rst
+++ b/doc/guides/nics/sfc_efx.rst
@@ -127,7 +127,20 @@ Supported pattern items:
 
 - VOID
 
-- ETH (exact match of source/destination addresses, EtherType)
+- ETH (exact match of source/destination addresses, individual/group match
+  of destination address, EtherType)
+
+- VLAN (exact match of VID, double-tagging is supported)
+
+- IPV4 (exact match of source/destination addresses,
+  IP transport protocol)
+
+- IPV6 (exact match of source/destination addresses,
+  IP transport protocol)
+
+- TCP (exact match of source/destination ports)
+
+- UDP (exact match of source/destination ports)
 
 Supported actions:
 
@@ -137,6 +150,14 @@ Supported actions:
 
 Validating flow rules depends on the firmware variant.
 
+Ethernet destinaton individual/group match
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Ethernet item supports I/G matching, if only the corresponding bit is set
+in the mask of destination address. If destinaton address in the spec is
+multicast, it matches all multicast (and broadcast) packets, oherwise it
+matches unicast packets that are not filtered by other flow rules.
+
 
 Supported NICs
 --------------
@@ -221,3 +242,12 @@ boolean parameters value.
   Enable extra logging of the communication with the NIC's management CPU.
   The logging is done using RTE_LOG() with INFO level and PMD type.
   The format is consumed by the Solarflare netlogdecode cross-platform tool.
+
+- ``stats_update_period_ms`` [long] (default **1000**)
+
+  Adjust period in milliseconds to update port hardware statistics.
+  The accepted range is 0 to 65535. The value of **0** may be used
+  to disable periodic statistics update. One should note that it's
+  only possible to set an arbitrary value on SFN8xxx provided that
+  firmware version is 6.2.1.1033 or higher, otherwise any positive
+  value will select a fixed update period of **1000** milliseconds