X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=doc%2Fguides%2Fnics%2Fsfc_efx.rst;h=cf1269cc031a8a2eacb1406a48876444bc7afc8b;hb=e77f5dc83decf2704ac356b0b6e9a23e5cc3680b;hp=0e32d0c6d94ad8008c6229f5c64dd11936cec966;hpb=e30f1081c22f3b20d60a9b72ae8625cbfa69763d;p=dpdk.git

diff --git a/doc/guides/nics/sfc_efx.rst b/doc/guides/nics/sfc_efx.rst
index 0e32d0c6d9..cf1269cc03 100644
--- a/doc/guides/nics/sfc_efx.rst
+++ b/doc/guides/nics/sfc_efx.rst
@@ -1,5 +1,5 @@
 ..  SPDX-License-Identifier: BSD-3-Clause
-    Copyright(c) 2019-2020 Xilinx, Inc.
+    Copyright(c) 2019-2021 Xilinx, Inc.
     Copyright(c) 2016-2019 Solarflare Communications Inc.
 
     This software was jointly developed between OKTET Labs (under contract
@@ -8,9 +8,10 @@
 Solarflare libefx-based Poll Mode Driver
 ========================================
 
-The SFC EFX PMD (**librte_pmd_sfc_efx**) provides poll mode driver support
-for **Solarflare SFN7xxx and SFN8xxx** family of 10/40 Gbps adapters and
-**Solarflare XtremeScale X2xxx** family of 10/25/40/50/100 Gbps adapters.
+The SFC EFX PMD (**librte_net_sfc_efx**) provides poll mode driver support
+for **Solarflare SFN7xxx and SFN8xxx** family of 10/40 Gbps adapters,
+**Solarflare XtremeScale X2xxx** family of 10/25/40/50/100 Gbps adapters and
+**Alveo SN1000 SmartNICs** family of 10/25/40/50/100 Gbps adapters.
 SFC EFX PMD has support for the latest Linux and FreeBSD operating systems.
 
 More information can be found at `Solarflare Communications website
@@ -143,8 +144,9 @@ Flow API support
 Supported attributes:
 
 - Ingress
+- Transfer
 
-Supported pattern items:
+Supported pattern items (***non-transfer*** rules):
 
 - VOID
 
@@ -172,7 +174,7 @@ Supported pattern items:
 
 - NVGRE (exact match of virtual subnet ID)
 
-Supported actions:
+Supported actions (***non-transfer*** rules):
 
 - VOID
 
@@ -186,10 +188,66 @@ Supported actions:
 
 - MARK (supported only with ef10_essb Rx datapath)
 
+Supported pattern items (***transfer*** rules):
+
+- PORT_ID (cannot repeat; conflicts with other traffic source items)
+
+- PHY_PORT (cannot repeat; conflicts with other traffic source items)
+
+- PF (cannot repeat; conflicts with other traffic source items)
+
+- VF (cannot repeat; conflicts with other traffic source items)
+
+- ETH
+
+- VLAN (double-tagging is supported)
+
+- IPV4 (source/destination addresses, IP transport protocol,
+  type of service, time to live)
+
+- IPV6 (source/destination addresses, IP transport protocol,
+  traffic class, hop limit)
+
+- TCP (source/destination ports, TCP header length + TCP flags)
+
+- UDP (source/destination ports)
+
+- VXLAN (exact match of VXLAN network identifier)
+
+- GENEVE (exact match of virtual network identifier)
+
+- NVGRE (exact match of virtual subnet ID)
+
+Supported actions (***transfer*** rules):
+
+- OF_POP_VLAN
+
+- OF_PUSH_VLAN
+
+- OF_VLAN_SET_VID
+
+- OF_VLAN_SET_PCP
+
+- FLAG
+
+- MARK
+
+- PHY_PORT
+
+- PF
+
+- VF
+
+- PORT_ID
+
+- DROP
+
 Validating flow rules depends on the firmware variant.
 
 The :ref:`flow_isolated_mode` is supported.
 
+The implementation is natively thread-safe.
+
 Ethernet destination individual/group match
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
@@ -219,6 +277,10 @@ conditions is met:
 Supported NICs
 --------------
 
+- Xilinx Adapters:
+
+   - Alveo SN1022 SmartNIC
+
 - Solarflare XtremeScale Adapters:
 
    - Solarflare X2522 Dual Port SFP28 10/25GbE Adapter
@@ -290,11 +352,19 @@ Per-Device Parameters
 ~~~~~~~~~~~~~~~~~~~~~
 
 The following per-device parameters can be passed via EAL PCI device
-whitelist option like "-w 02:00.0,arg1=value1,...".
+allow option like "-a 02:00.0,arg1=value1,...".
 
 Case-insensitive 1/y/yes/on or 0/n/no/off may be used to specify
 boolean parameters value.
 
+- ``class`` [net|vdpa] (default **net**)
+
+  Choose the mode of operation of ef100 device.
+  **net** device will work as network device and will be probed by net/sfc driver.
+  **vdpa** device will work as vdpa device and will be probed by vdpa/sfc driver.
+  If this parameter is not specified then ef100 device will operate as
+  network device.
+
 - ``rx_datapath`` [auto|efx|ef10|ef10_essb] (default **auto**)
 
   Choose receive datapath implementation.
@@ -329,7 +399,8 @@ boolean parameters value.
   is even more faster then **ef10** but does not support multi-segment
   mbufs, disallows multiple mempools and neglects mbuf reference counters.
   **ef100** chooses EF100 native datapath which supports multi-segment
-  mbufs, IPv4 and TCP/UDP checksum offloads.
+  mbufs, VLAN insertion, inner/outer IPv4 and TCP/UDP checksum and TCP
+  segmentation offloads including VXLAN and GENEVE IPv4/IPv6 tunnels.
 
 - ``perf_profile`` [auto|throughput|low-latency] (default **throughput**)
 
@@ -350,10 +421,11 @@ boolean parameters value.
 - ``fw_variant`` [dont-care|full-feature|ultra-low-latency|
   capture-packed-stream|dpdk] (default **dont-care**)
 
-  Choose the preferred firmware variant to use. In order for the selected
-  option to have an effect, the **sfboot** utility must be configured with the
-  **auto** firmware-variant option. The preferred firmware variant applies to
-  all ports on the NIC.
+  Choose the preferred firmware variant to use.
+  The parameter is supported for SFN7xxX, SFN8xxx and X2xxx families only.
+  In order for the selected option to have an effect, the **sfboot** utility
+  must be configured with the **auto** firmware-variant option.
+  The preferred firmware variant applies to all ports on the NIC.
   **dont-care** ensures that the driver can attach to an unprivileged function.
   The datapath firmware type to use is controlled by the **sfboot**
   utility.