X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=doc%2Fguides%2Fprog_guide%2Fpoll_mode_drv.rst;h=68312898448cb857e45c7a18584022d8c40e677c;hb=34fd4373ce76efd0236e59397c495762c2ec9e64;hp=6fae39f9048a50120538c7c03ce25db38a92c1f3;hpb=5a10413c5812be50a0c03c5ea5622a7b3cd7dbad;p=dpdk.git

diff --git a/doc/guides/prog_guide/poll_mode_drv.rst b/doc/guides/prog_guide/poll_mode_drv.rst
index 6fae39f904..6831289844 100644
--- a/doc/guides/prog_guide/poll_mode_drv.rst
+++ b/doc/guides/prog_guide/poll_mode_drv.rst
@@ -57,7 +57,7 @@ Whenever needed and appropriate, asynchronous communication should be introduced
 
 Avoiding lock contention is a key issue in a multi-core environment.
 To address this issue, PMDs are designed to work with per-core private resources as much as possible.
-For example, a PMD maintains a separate transmit queue per-core, per-port, if the PMD is not ``DEV_TX_OFFLOAD_MT_LOCKFREE`` capable.
+For example, a PMD maintains a separate transmit queue per-core, per-port, if the PMD is not ``RTE_ETH_TX_OFFLOAD_MT_LOCKFREE`` capable.
 In the same way, every receive queue of a port is assigned to and polled by a single logical core (lcore).
 
 To comply with Non-Uniform Memory Access (NUMA), memory management is designed to assign to each logical core
@@ -119,7 +119,7 @@ This is also true for the pipe-line model provided all logical cores used are lo
 
 Multiple logical cores should never share receive or transmit queues for interfaces since this would require global locks and hinder performance.
 
-If the PMD is ``DEV_TX_OFFLOAD_MT_LOCKFREE`` capable, multiple threads can invoke ``rte_eth_tx_burst()``
+If the PMD is ``RTE_ETH_TX_OFFLOAD_MT_LOCKFREE`` capable, multiple threads can invoke ``rte_eth_tx_burst()``
 concurrently on the same tx queue without SW lock. This PMD feature found in some NICs and useful in the following use cases:
 
 *  Remove explicit spinlock in some applications where lcores are not mapped to Tx queues with 1:1 relation.
@@ -127,7 +127,7 @@ concurrently on the same tx queue without SW lock. This PMD feature found in som
 *  In the eventdev use case, avoid dedicating a separate TX core for transmitting and thus
    enables more scaling as all workers can send the packets.
 
-See `Hardware Offload`_ for ``DEV_TX_OFFLOAD_MT_LOCKFREE`` capability probing details.
+See `Hardware Offload`_ for ``RTE_ETH_TX_OFFLOAD_MT_LOCKFREE`` capability probing details.
 
 Device Identification, Ownership and Configuration
 --------------------------------------------------
@@ -311,7 +311,7 @@ The ``dev_info->[rt]x_queue_offload_capa`` returned from ``rte_eth_dev_info_get(
 The ``dev_info->[rt]x_offload_capa`` returned from ``rte_eth_dev_info_get()`` includes all pure per-port and per-queue offloading capabilities.
 Supported offloads can be either per-port or per-queue.
 
-Offloads are enabled using the existing ``DEV_TX_OFFLOAD_*`` or ``DEV_RX_OFFLOAD_*`` flags.
+Offloads are enabled using the existing ``RTE_ETH_TX_OFFLOAD_*`` or ``RTE_ETH_RX_OFFLOAD_*`` flags.
 Any requested offloading by an application must be within the device capabilities.
 Any offloading is disabled by default if it is not set in the parameter
 ``dev_conf->[rt]xmode.offloads`` to ``rte_eth_dev_configure()`` and
@@ -372,11 +372,19 @@ parameters to those ports.
 
 * ``representor`` for a device which supports the creation of representor ports
   this argument allows user to specify which switch ports to enable port
-  representors for.::
-
-   -w DBDF,representor=0
-   -w DBDF,representor=[0,4,6,9]
-   -w DBDF,representor=[0-31]
+  representors for. Multiple representors in one device argument is invalid::
+
+   -a DBDF,representor=vf0
+   -a DBDF,representor=vf[0,4,6,9]
+   -a DBDF,representor=vf[0-31]
+   -a DBDF,representor=vf[0,2-4,7,9-11]
+   -a DBDF,representor=sf0
+   -a DBDF,representor=sf[1,3,5]
+   -a DBDF,representor=sf[0-1023]
+   -a DBDF,representor=sf[0,2-4,7,9-11]
+   -a DBDF,representor=pf1vf0
+   -a DBDF,representor=pf[0-1]sf[0-127]
+   -a DBDF,representor=pf1
 
 Note: PMDs are not required to support the standard device arguments and users
 should consult the relevant PMD documentation to see support devargs.
@@ -600,9 +608,9 @@ thread safety all these operations should be called from the same thread.
 For example when PF is reset, the PF sends a message to notify VFs of
 this event and also trigger an interrupt to VFs. Then in the interrupt
 service routine the VFs detects this notification message and calls
-_rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_RESET, NULL).
+rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_RESET, NULL).
 This means that a PF reset triggers an RTE_ETH_EVENT_INTR_RESET
-event within VFs. The function _rte_eth_dev_callback_process() will
+event within VFs. The function rte_eth_dev_callback_process() will
 call the registered callback function. The callback function can trigger
 the application to handle all operations the VF reset requires including
 stopping Rx/Tx queues and calling rte_eth_dev_reset().