X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=doc%2Fguides%2Frel_notes%2Fdeprecation.rst;h=237813b6472c67d967601ee3a834f7620677d9ae;hb=a6a752402dfce8695c258a27da97d5a6d187c49b;hp=2f2f0d2381107ea7154daa5aa666b327ba234d97;hpb=1983b990def13ed4bdefe088c31664463010a275;p=dpdk.git diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst index 2f2f0d2381..237813b647 100644 --- a/doc/guides/rel_notes/deprecation.rst +++ b/doc/guides/rel_notes/deprecation.rst @@ -1,3 +1,6 @@ +.. SPDX-License-Identifier: BSD-3-Clause + Copyright 2018 The DPDK contributors + ABI and API Deprecation ======================= @@ -8,57 +11,70 @@ API and ABI deprecation notices are to be posted here. Deprecation Notices ------------------- -* eal: the following functions are deprecated starting from 17.05 and will - be removed in 17.11: - - - ``rte_set_log_level``, replaced by ``rte_log_set_global_level`` - - ``rte_get_log_level``, replaced by ``rte_log_get_global_level`` - - ``rte_set_log_type``, replaced by ``rte_log_set_level`` - - ``rte_get_log_type``, replaced by ``rte_log_get_level`` - -* eal: several API and ABI changes are planned for ``rte_devargs`` in v17.11. - The format of device command line parameters will change. The bus will need - to be explicitly stated in the device declaration. The enum ``rte_devtype`` - was used to identify a bus and will disappear. - The structure ``rte_devargs`` will change. - The ``rte_devargs_list`` will be made private. - The following functions are deprecated starting from 17.08 and will either be - modified or removed in 17.11: - - - ``rte_eal_devargs_add`` - - ``rte_eal_devargs_type_count`` - - ``rte_eal_parse_devargs_str``, replaced by ``rte_eal_devargs_parse`` - -* eal: the support of Xen dom0 will be removed from EAL in 17.11; and with - that, drivers/net/xenvirt and examples/vhost_xen will also be removed. - -* eal: An ABI change is planned for 17.11 to make DPDK aware of IOVA address - translation scheme. - Reference to phys address in EAL data-structure or functions may change to - IOVA address or more appropriate name. - The change will be only for the name. - Functional aspects of the API or data-structure will remain same. - -* The mbuf flags PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT are deprecated and - are respectively replaced by PKT_RX_VLAN_STRIPPED and - PKT_RX_QINQ_STRIPPED, that are better described. The old flags and - their behavior will be kept until 17.08 and will be removed in 17.11. - -* mempool: The following will be modified in 17.11: - - - ``rte_mempool_xmem_size`` and ``rte_mempool_xmem_usage`` need to know - the mempool flag status so adding new param rte_mempool in those API. - - Removing __rte_unused int flag param from ``rte_mempool_generic_put`` - and ``rte_mempool_generic_get`` API. - - ``rte_mempool`` flags data type will changed from int to - unsigned int. - -* ethdev: Tx offloads will no longer be enabled by default in 17.11. - Instead, the ``rte_eth_txmode`` structure will be extended with - bit field to enable each Tx offload. - Besides of making the Rx/Tx configuration API more consistent for the - application, PMDs will be able to provide a better out of the box performance. - As part of the work, ``ETH_TXQ_FLAGS_NO*`` will be superseded as well. +* meson: The minimum supported version of meson for configuring and building + DPDK will be increased to v0.47.1 (from 0.41) from DPDK 19.05 onwards. For + those users with a version earlier than 0.47.1, an updated copy of meson + can be got using the ``pip``, or ``pip3``, tool for downloading python + packages. + +* kvargs: The function ``rte_kvargs_process`` will get a new parameter + for returning key match count. It will ease handling of no-match case. + +* eal: The function ``rte_eal_remote_launch`` will return new error codes + after read or write error on the pipe, instead of calling ``rte_panic``. + +* eal: The ``lcore_config`` struct and global symbol will be made private to + remove it from the externally visible ABI and allow it to be updated in the + future. + +* eal: both declaring and identifying devices will be streamlined in v18.11. + New functions will appear to query a specific port from buses, classes of + device and device drivers. Device declaration will be made coherent with the + new scheme of device identification. + As such, ``rte_devargs`` device representation will change. + + - The enum ``rte_devtype`` was used to identify a bus and will disappear. + - Functions previously deprecated will change or disappear: + + + ``rte_eal_devargs_type_count`` + +* eal: The ``rte_cpu_check_supported`` function has been deprecated since + v17.08 and will be removed. + +* eal: The ``rte_malloc_virt2phy`` function has been deprecated and replaced + by ``rte_malloc_virt2iova`` since v17.11 and will be removed. + +* vfio: removal of ``rte_vfio_dma_map`` and ``rte_vfio_dma_unmap`` APIs which + have been replaced with ``rte_dev_dma_map`` and ``rte_dev_dma_unmap`` + functions. The due date for the removal targets DPDK 20.02. + +* pci: Several exposed functions are misnamed. + The following functions are deprecated starting from v17.11 and are replaced: + + - ``eal_parse_pci_BDF`` replaced by ``rte_pci_addr_parse`` + - ``eal_parse_pci_DomBDF`` replaced by ``rte_pci_addr_parse`` + - ``rte_eal_compare_pci_addr`` replaced by ``rte_pci_addr_cmp`` + +* dpaa2: removal of ``rte_dpaa2_memsegs`` structure which has been replaced + by a pa-va search library. This structure was earlier being used for holding + memory segments used by dpaa2 driver for faster pa->va translation. This + structure would be made internal (or removed if all dependencies are cleared) + in future releases. + +* net: The Ethernet address and header definitions will change + attributes. The Ethernet address struct will no longer be marked as + packed since the packed attribute is meaningless on a byte + array. The Ethernet header will be marked as aligned on a 2-byte + boundary and will no longer have the packed attribute. This allows + for efficient access on CPU architectures where unaligned access is + expensive. These changes should not impact normal usage because drivers + naturally align the Ethernet header on receive and all known + encapsulations preserve the alignment of the header. + +* ethdev: The function ``rte_eth_dev_count`` will be removed in DPDK 20.02. + It is replaced by the function ``rte_eth_dev_count_avail``. + If the intent is to iterate over ports, ``RTE_ETH_FOREACH_*`` macros + are better port iterators. * ethdev: the legacy filter API, including ``rte_eth_dev_filter_supported()``, ``rte_eth_dev_filter_ctrl()`` as well @@ -68,46 +84,57 @@ Deprecation Notices Target release for removal of the legacy API will be defined once most PMDs have switched to rte_flow. -* ethdev: The device flag advertizing hotplug capability - ``RTE_ETH_DEV_DETACHABLE`` is not needed anymore and will be removed in - v17.11. - This capability is verified upon calling the relevant hotplug functions in EAL - by checking that the ``unplug`` ops is set in the bus. This verification is - done by the EAL and not by the ``ethdev`` layer anymore. Users relying on this - flag being present only have to remove their checks to follow the change. - -* ABI/API changes are planned for 17.11 in all structures which include port_id - definition such as "rte_eth_dev_data", "rte_port_ethdev_reader_params", - "rte_port_ethdev_writer_params", and so on. The definition of port_id will be - changed from 8 bits to 16 bits in order to support more than 256 ports in - DPDK. All APIs which have port_id parameter will be changed at the same time. - -* ethdev: An ABI change is planned for 17.11 for the structure rte_eth_dev_data. - The size of the unique name will increase RTE_ETH_NAME_MAX_LEN from 32 to - 64 characters to allow using a globally unique identifier (GUID) in this field. - -* ethdev: new parameters - ``rte_security_capabilities`` and - ``rte_security_ops`` will be added to ``rte_eth_dev_info`` and - ``rte_eth_dev`` respectively to support security operations like - ipsec inline. - -* cryptodev: new parameters - ``rte_security_capabilities`` and - ``rte_security_ops`` will be added to ``rte_cryptodev_info`` and - ``rte_cryptodev`` respectively to support security protocol offloaded - operations. - -* cryptodev: the following function is deprecated starting from 17.08 and will - be removed in 17.11: - - - ``rte_cryptodev_create_vdev`` - -* cryptodev: the following function will be static in 17.11 and included - by all crypto drivers, therefore, will not be public: - - - ``rte_cryptodev_vdev_pmd_init`` - -* librte_table: The ``key_mask`` parameter will be added to all the hash tables - that currently do not have it, as well as to the hash compute function prototype. - The non-"do-sig" versions of the hash tables will be removed - (including the ``signature_offset`` parameter) - and the "do-sig" versions renamed accordingly. +* ethdev: Update API functions returning ``void`` to return ``int`` with + negative errno values to indicate various error conditions (e.g. + invalid port ID, unsupported operation, failed operation): + + - ``rte_eth_dev_stop`` + - ``rte_eth_dev_close`` + +* ethdev: New offload flags ``DEV_RX_OFFLOAD_RSS_HASH`` and + ``DEV_RX_OFFLOAD_FLOW_MARK`` will be added in 19.11. + This will allow application to enable or disable PMDs from updating + ``rte_mbuf::hash::rss`` and ``rte_mbuf::hash::fdir`` respectively. + This scheme will allow PMDs to avoid writes to ``rte_mbuf`` fields on Rx and + thereby improve Rx performance if application wishes do so. + In 19.11 PMDs will still update the fields even when the offloads are not + enabled. + +* ethdev: New function ``rte_eth_dev_set_supported_ptypes`` will be added in + 19.11. + This will allow application to request PMD to set specific ptypes defined + through ``rte_eth_dev_set_supported_ptypes`` in ``rte_mbuf::packet_type``. + If application doesn't want any ptype information it can call + ``rte_eth_dev_set_supported_ptypes(ethdev_id, RTE_PTYPE_UNKNOWN)`` and PMD + will set ``rte_mbuf::packet_type`` to ``0``. + If application doesn't call ``rte_eth_dev_set_supported_ptypes`` PMD can + return ``rte_mbuf::packet_type`` with ``rte_eth_dev_get_supported_ptypes``. + If application is interested only in L2/L3 layer, it can inform the PMD + to update ``rte_mbuf::packet_type`` with L2/L3 ptype by calling + ``rte_eth_dev_set_supported_ptypes(ethdev_id, RTE_PTYPE_L2_MASK | RTE_PTYPE_L3_MASK)``. + This scheme will allow PMDs to avoid lookup to internal ptype table on Rx and + thereby improve Rx performance if application wishes do so. + +* ethdev: New 32-bit fields may be added for maximum LRO session size, in + struct ``rte_eth_dev_info`` for the port capability and in struct + ``rte_eth_rxmode`` for the port configuration. + +* cryptodev: support for using IV with all sizes is added, J0 still can + be used but only when IV length in following structs ``rte_crypto_auth_xform``, + ``rte_crypto_aead_xform`` is set to zero. When IV length is greater or equal + to one it means it represents IV, when is set to zero it means J0 is used + directly, in this case 16 bytes of J0 need to be passed. + +* sched: To allow more traffic classes, flexible mapping of pipe queues to + traffic classes, and subport level configuration of pipes and queues + changes will be made to macros, data structures and API functions defined + in "rte_sched.h". These changes are aligned to improvements suggested in the + RFC https://mails.dpdk.org/archives/dev/2018-November/120035.html. + +* metrics: The function ``rte_metrics_init`` will have a non-void return + in order to notify errors instead of calling ``rte_exit``. + +* power: ``rte_power_set_env`` function will no longer return 0 on attempt + to set new power environment if power environment was already initialized. + In this case the function will return -1 unless the environment is unset first + (using ``rte_power_unset_env``). Other function usage scenarios will not change.