X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=doc%2Fguides%2Frel_notes%2Fdeprecation.rst;h=64629e064104d98b3b08ab105107ff37eb3822ed;hb=e34e2f55a793c8393fb34afc5b0e19518c713e65;hp=99d81564a816031433bf05fbd44f17faffa6ee61;hpb=58245da070289f4b248f15970c3f8af73ea601ed;p=dpdk.git diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst index 99d81564a8..64629e0641 100644 --- a/doc/guides/rel_notes/deprecation.rst +++ b/doc/guides/rel_notes/deprecation.rst @@ -11,32 +11,24 @@ here. Deprecation Notices ------------------- -* meson: The minimum supported version of meson for configuring and building - DPDK will be increased to v0.47.1 (from 0.41) from DPDK 19.05 onwards. For - those users with a version earlier than 0.47.1, an updated copy of meson - can be got using the ``pip``, or ``pip3``, tool for downloading python - packages. - * kvargs: The function ``rte_kvargs_process`` will get a new parameter for returning key match count. It will ease handling of no-match case. * eal: The function ``rte_eal_remote_launch`` will return new error codes after read or write error on the pipe, instead of calling ``rte_panic``. -* eal: both declaring and identifying devices will be streamlined in v18.11. - New functions will appear to query a specific port from buses, classes of - device and device drivers. Device declaration will be made coherent with the - new scheme of device identification. - As such, ``rte_devargs`` device representation will change. - - - The enum ``rte_devtype`` was used to identify a bus and will disappear. - - Functions previously deprecated will change or disappear: +* rte_atomicNN_xxx: These APIs do not take memory order parameter. This does + not allow for writing optimized code for all the CPU architectures supported + in DPDK. DPDK will adopt C11 atomic operations semantics and provide wrappers + using C11 atomic built-ins. These wrappers must be used for patches that + need to be merged in 20.08 onwards. This change will not introduce any + performance degradation. - + ``rte_eal_devargs_type_count`` - -* eal: The ``rte_logs`` struct and global symbol will be made private to - remove it from the externally visible ABI and allow it to be updated in the - future. +* rte_smp_*mb: These APIs provide full barrier functionality. However, many + use cases do not require full barriers. To support such use cases, DPDK will + adopt C11 barrier semantics and provide wrappers using C11 atomic built-ins. + These wrappers must be used for patches that need to be merged in 20.08 + onwards. This change will not introduce any performance degradation. * lib: will fix extending some enum/define breaking the ABI. There are multiple samples in DPDK that enum/define terminated with a ``.*MAX.*`` value which is @@ -52,31 +44,9 @@ Deprecation Notices us extending existing enum/define. One solution can be using a fixed size array instead of ``.*MAX.*`` value. -* dpaa2: removal of ``rte_dpaa2_memsegs`` structure which has been replaced - by a pa-va search library. This structure was earlier being used for holding - memory segments used by dpaa2 driver for faster pa->va translation. This - structure would be made internal (or removed if all dependencies are cleared) - in future releases. - -* mempool: starting from v20.05, the API of rte_mempool_populate_iova() - and rte_mempool_populate_virt() will change to return 0 instead - of -EINVAL when there is not enough room to store one object. The ABI - will be preserved until 20.11. - -* ethdev: the legacy filter API, including - ``rte_eth_dev_filter_supported()``, ``rte_eth_dev_filter_ctrl()`` as well - as filter types MACVLAN, ETHERTYPE, FLEXIBLE, SYN, NTUPLE, TUNNEL, FDIR, - HASH and L2_TUNNEL, is superseded by the generic flow API (rte_flow) in - PMDs that implement the latter. - Target release for removal of the legacy API will be defined once most - PMDs have switched to rte_flow. - -* ethdev: Update API functions returning ``void`` to return ``int`` with - negative errno values to indicate various error conditions (e.g. - invalid port ID, unsupported operation, failed operation): - - - ``rte_eth_dev_stop`` - - ``rte_eth_dev_close`` +* ethdev: The flow director API, including ``rte_eth_conf.fdir_conf`` field, + and the related structures (``rte_fdir_*`` and ``rte_eth_fdir_*``), + will be removed in DPDK 20.11. * ethdev: New offload flags ``DEV_RX_OFFLOAD_FLOW_MARK`` will be added in 19.11. This will allow application to enable or disable PMDs from updating @@ -86,11 +56,67 @@ Deprecation Notices In 19.11 PMDs will still update the field even when the offload is not enabled. -* cryptodev: support for using IV with all sizes is added, J0 still can - be used but only when IV length in following structs ``rte_crypto_auth_xform``, - ``rte_crypto_aead_xform`` is set to zero. When IV length is greater or equal - to one it means it represents IV, when is set to zero it means J0 is used - directly, in this case 16 bytes of J0 need to be passed. +* ethdev: ``uint32_t max_rx_pkt_len`` field of ``struct rte_eth_rxmode``, will be + replaced by a new ``uint32_t mtu`` field of ``struct rte_eth_conf`` in v21.11. + The new ``mtu`` field will be used to configure the initial device MTU via + ``rte_eth_dev_configure()`` API. + Later MTU can be changed by ``rte_eth_dev_set_mtu()`` API as done now. + The existing ``(struct rte_eth_dev)->data->mtu`` variable will be used to store + the configured ``mtu`` value, + and this new ``(struct rte_eth_dev)->data->dev_conf.mtu`` variable will + be used to store the user configuration request. + Unlike ``max_rx_pkt_len``, which was valid only when ``JUMBO_FRAME`` enabled, + ``mtu`` field will be always valid. + When ``mtu`` config is not provided by the application, default ``RTE_ETHER_MTU`` + value will be used. + ``(struct rte_eth_dev)->data->mtu`` should be updated after MTU set successfully, + either by ``rte_eth_dev_configure()`` or ``rte_eth_dev_set_mtu()``. + + An application may need to configure device for a specific Rx packet size, like for + cases ``DEV_RX_OFFLOAD_SCATTER`` is not supported and device received packet size + can't be bigger than Rx buffer size. + To cover these cases an application needs to know the device packet overhead to be + able to calculate the ``mtu`` corresponding to a Rx buffer size, for this + ``(struct rte_eth_dev_info).max_rx_pktlen`` will be kept, + the device packet overhead can be calculated as: + ``(struct rte_eth_dev_info).max_rx_pktlen - (struct rte_eth_dev_info).max_mtu`` + +* ethdev: ``rx_descriptor_done`` dev_ops and ``rte_eth_rx_descriptor_done`` + will be removed in 21.11. + Existing ``rte_eth_rx_descriptor_status`` and ``rte_eth_tx_descriptor_status`` + APIs can be used as replacement. + +* ethdev: The port mirroring API can be replaced with a more fine grain flow API. + The structs ``rte_eth_mirror_conf``, ``rte_eth_vlan_mirror`` and the functions + ``rte_eth_mirror_rule_set``, ``rte_eth_mirror_rule_reset`` will be marked + as deprecated in DPDK 20.11, along with the associated macros ``ETH_MIRROR_*``. + This API will be fully removed in DPDK 21.11. + +* ethdev: Attribute ``shared`` of the ``struct rte_flow_action_count`` + is deprecated and will be removed in DPDK 21.11. Shared counters should + be managed using shared actions API (``rte_flow_shared_action_create`` etc). + +* ethdev: The flow API matching pattern structures, ``struct rte_flow_item_*``, + should start with relevant protocol header. + Some matching pattern structures implements this by duplicating protocol header + fields in the struct. To clarify the intention and to be sure protocol header + is intact, will replace those fields with relevant protocol header struct. + In v21.02 both individual protocol header fields and the protocol header struct + will be added as union, target is switch usage to the protocol header by time. + In v21.11 LTS, protocol header fields will be cleaned and only protocol header + struct will remain. + +* ethdev: Queue specific stats fields will be removed from ``struct rte_eth_stats``. + Mentioned fields are: ``q_ipackets``, ``q_opackets``, ``q_ibytes``, ``q_obytes``, + ``q_errors``. + Instead queue stats will be received via xstats API. Current method support + will be limited to maximum 256 queues. + Also compile time flag ``RTE_ETHDEV_QUEUE_STAT_CNTRS`` will be removed. + +* ethdev: The offload flag ``PKT_RX_EIP_CKSUM_BAD`` will be removed and + replaced by the new flag ``PKT_RX_OUTER_IP_CKSUM_BAD``. The new name is more + consistent with existing outer header checksum status flag naming, which + should help in reducing confusion about its usage. * sched: To allow more traffic classes, flexible mapping of pipe queues to traffic classes, and subport level configuration of pipes and queues @@ -101,7 +127,6 @@ Deprecation Notices * metrics: The function ``rte_metrics_init`` will have a non-void return in order to notify errors instead of calling ``rte_exit``. -* power: ``rte_power_set_env`` function will no longer return 0 on attempt - to set new power environment if power environment was already initialized. - In this case the function will return -1 unless the environment is unset first - (using ``rte_power_unset_env``). Other function usage scenarios will not change. +* cmdline: ``cmdline`` structure will be made opaque to hide platform-specific + content. On Linux and FreeBSD, supported prior to DPDK 20.11, + original structure will be kept until DPDK 21.11.