X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=drivers%2Fbus%2Ffslmc%2Fportal%2Fdpaa2_hw_pvt.h;h=41bcf0330b6e627e6968e97beee2084a6e1db43b;hb=da51d4d956516c4968261dbb4ce49c1434f18b71;hp=e5c8761e9d37cca7c713d6effa048ddc37f4106e;hpb=d08e662a4b2050715f9a32d5a195952a6c26e9ca;p=dpdk.git

diff --git a/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h b/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h
index e5c8761e9d..41bcf0330b 100644
--- a/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h
+++ b/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h
@@ -43,6 +43,16 @@
 #ifndef true
 #define true       1
 #endif
+#define lower_32_bits(x) ((uint32_t)(x))
+#define upper_32_bits(x) ((uint32_t)(((x) >> 16) >> 16))
+
+#ifndef ETH_VLAN_HLEN
+#define ETH_VLAN_HLEN   4 /** < Vlan Header Length */
+#endif
+
+#define MAX_TX_RING_SLOTS	8
+	/** <Maximum number of slots available in TX ring*/
+
 #define DPAA2_DQRR_RING_SIZE	16
 	/** <Maximum number of slots available in RX ring*/
 
@@ -116,6 +126,119 @@ struct dpaa2_queue {
 /*! Global MCP list */
 extern void *(*rte_mcp_ptr_list);
 
+/* Refer to Table 7-3 in SEC BG */
+struct qbman_fle {
+	uint32_t addr_lo;
+	uint32_t addr_hi;
+	uint32_t length;
+	/* FMT must be 00, MSB is final bit  */
+	uint32_t fin_bpid_offset;
+	uint32_t frc;
+	uint32_t reserved[3]; /* Not used currently */
+};
+
+/*Macros to define operations on FD*/
+#define DPAA2_SET_FD_ADDR(fd, addr) do {			\
+	fd->simple.addr_lo = lower_32_bits((uint64_t)(addr));	\
+	fd->simple.addr_hi = upper_32_bits((uint64_t)(addr));	\
+} while (0)
+#define DPAA2_SET_FD_LEN(fd, length)	(fd)->simple.len = length
+#define DPAA2_SET_FD_BPID(fd, bpid)	((fd)->simple.bpid_offset |= bpid)
+#define DPAA2_SET_FD_OFFSET(fd, offset)	\
+	((fd->simple.bpid_offset |= (uint32_t)(offset) << 16))
+#define DPAA2_RESET_FD_CTRL(fd)	(fd)->simple.ctrl = 0
+
+#define	DPAA2_SET_FD_ASAL(fd, asal)	((fd)->simple.ctrl |= (asal << 16))
+#define DPAA2_SET_FD_FLC(fd, addr)	do { \
+	fd->simple.flc_lo = lower_32_bits((uint64_t)(addr));	\
+	fd->simple.flc_hi = upper_32_bits((uint64_t)(addr));	\
+} while (0)
+#define DPAA2_GET_FD_ADDR(fd)	\
+((uint64_t)((((uint64_t)((fd)->simple.addr_hi)) << 32) + (fd)->simple.addr_lo))
+
+#define DPAA2_GET_FD_LEN(fd)	((fd)->simple.len)
+#define DPAA2_GET_FD_BPID(fd)	(((fd)->simple.bpid_offset & 0x00003FFF))
+#define DPAA2_GET_FD_OFFSET(fd)	(((fd)->simple.bpid_offset & 0x0FFF0000) >> 16)
+#define DPAA2_INLINE_MBUF_FROM_BUF(buf, meta_data_size) \
+	((struct rte_mbuf *)((uint64_t)(buf) - (meta_data_size)))
+
+#define DPAA2_ASAL_VAL (DPAA2_MBUF_HW_ANNOTATION / 64)
+
+/* Only Enqueue Error responses will be
+ * pushed on FQID_ERR of Enqueue FQ
+ */
+#define DPAA2_EQ_RESP_ERR_FQ		0
+/* All Enqueue responses will be pushed on address
+ * set with qbman_eq_desc_set_response
+ */
+#define DPAA2_EQ_RESP_ALWAYS		1
+
+#ifdef RTE_LIBRTE_DPAA2_USE_PHYS_IOVA
+static void *dpaa2_mem_ptov(phys_addr_t paddr) __attribute__((unused));
+/* todo - this is costly, need to write a fast coversion routine */
+static void *dpaa2_mem_ptov(phys_addr_t paddr)
+{
+	const struct rte_memseg *memseg = rte_eal_get_physmem_layout();
+	int i;
+
+	for (i = 0; i < RTE_MAX_MEMSEG && memseg[i].addr_64 != 0; i++) {
+		if (paddr >= memseg[i].phys_addr &&
+		   (char *)paddr < (char *)memseg[i].phys_addr + memseg[i].len)
+			return (void *)(memseg[i].addr_64
+				+ (paddr - memseg[i].phys_addr));
+	}
+	return NULL;
+}
+
+static phys_addr_t dpaa2_mem_vtop(uint64_t vaddr) __attribute__((unused));
+static phys_addr_t dpaa2_mem_vtop(uint64_t vaddr)
+{
+	const struct rte_memseg *memseg = rte_eal_get_physmem_layout();
+	int i;
+
+	for (i = 0; i < RTE_MAX_MEMSEG && memseg[i].addr_64 != 0; i++) {
+		if (vaddr >= memseg[i].addr_64 &&
+		    vaddr < memseg[i].addr_64 + memseg[i].len)
+			return memseg[i].phys_addr
+				+ (vaddr - memseg[i].addr_64);
+	}
+	return (phys_addr_t)(NULL);
+}
+
+/**
+ * When we are using Physical addresses as IO Virtual Addresses,
+ * Need to call conversion routines dpaa2_mem_vtop & dpaa2_mem_ptov
+ * whereever required.
+ * These routines are called with help of below MACRO's
+ */
+
+#define DPAA2_MBUF_VADDR_TO_IOVA(mbuf) ((mbuf)->buf_physaddr)
+
+/**
+ * macro to convert Virtual address to IOVA
+ */
+#define DPAA2_VADDR_TO_IOVA(_vaddr) dpaa2_mem_vtop((uint64_t)(_vaddr))
+
+/**
+ * macro to convert IOVA to Virtual address
+ */
+#define DPAA2_IOVA_TO_VADDR(_iova) dpaa2_mem_ptov((phys_addr_t)(_iova))
+
+/**
+ * macro to convert modify the memory containing IOVA to Virtual address
+ */
+#define DPAA2_MODIFY_IOVA_TO_VADDR(_mem, _type) \
+	{_mem = (_type)(dpaa2_mem_ptov((phys_addr_t)(_mem))); }
+
+#else	/* RTE_LIBRTE_DPAA2_USE_PHYS_IOVA */
+
+#define DPAA2_MBUF_VADDR_TO_IOVA(mbuf) ((mbuf)->buf_addr)
+#define DPAA2_VADDR_TO_IOVA(_vaddr) (_vaddr)
+#define DPAA2_IOVA_TO_VADDR(_iova) (_iova)
+#define DPAA2_MODIFY_IOVA_TO_VADDR(_mem, _type)
+
+#endif /* RTE_LIBRTE_DPAA2_USE_PHYS_IOVA */
+
 struct dpaa2_dpbp_dev *dpaa2_alloc_dpbp_dev(void);
 void dpaa2_free_dpbp_dev(struct dpaa2_dpbp_dev *dpbp);