X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=drivers%2Fbus%2Fpci%2Frte_bus_pci.h;h=29bea6d70da47ecdb0669cbd1ef379608878833c;hb=79e5b5ed8e5350734e34484db33820c09ac99a7f;hp=0d1955ffe0859088c8a538e3786509a205cd0834;hpb=f8e9989606e7a9548a25ac10e2daae4c8af230cb;p=dpdk.git

diff --git a/drivers/bus/pci/rte_bus_pci.h b/drivers/bus/pci/rte_bus_pci.h
index 0d1955ffe0..29bea6d70d 100644
--- a/drivers/bus/pci/rte_bus_pci.h
+++ b/drivers/bus/pci/rte_bus_pci.h
@@ -62,10 +62,12 @@ struct rte_pci_device {
 	struct rte_mem_resource mem_resource[PCI_MAX_RESOURCE];
 					    /**< PCI Memory Resource */
 	struct rte_intr_handle intr_handle; /**< Interrupt handle */
-	struct rte_pci_driver *driver;      /**< Associated driver */
+	struct rte_pci_driver *driver;      /**< PCI driver used in probing */
 	uint16_t max_vfs;                   /**< sriov enable if not zero */
 	enum rte_kernel_driver kdrv;        /**< Kernel driver passthrough */
 	char name[PCI_PRI_STR_SIZE+1];      /**< PCI location (ASCII) */
+	struct rte_intr_handle vfio_req_intr_handle;
+				/**< Handler of VFIO request interrupt */
 };
 
 /**
@@ -111,6 +113,44 @@ typedef int (pci_probe_t)(struct rte_pci_driver *, struct rte_pci_device *);
  */
 typedef int (pci_remove_t)(struct rte_pci_device *);
 
+/**
+ * Driver-specific DMA mapping. After a successful call the device
+ * will be able to read/write from/to this segment.
+ *
+ * @param dev
+ *   Pointer to the PCI device.
+ * @param addr
+ *   Starting virtual address of memory to be mapped.
+ * @param iova
+ *   Starting IOVA address of memory to be mapped.
+ * @param len
+ *   Length of memory segment being mapped.
+ * @return
+ *   - 0 On success.
+ *   - Negative value and rte_errno is set otherwise.
+ */
+typedef int (pci_dma_map_t)(struct rte_pci_device *dev, void *addr,
+			    uint64_t iova, size_t len);
+
+/**
+ * Driver-specific DMA un-mapping. After a successful call the device
+ * will not be able to read/write from/to this segment.
+ *
+ * @param dev
+ *   Pointer to the PCI device.
+ * @param addr
+ *   Starting virtual address of memory to be unmapped.
+ * @param iova
+ *   Starting IOVA address of memory to be unmapped.
+ * @param len
+ *   Length of memory segment being unmapped.
+ * @return
+ *   - 0 On success.
+ *   - Negative value and rte_errno is set otherwise.
+ */
+typedef int (pci_dma_unmap_t)(struct rte_pci_device *dev, void *addr,
+			      uint64_t iova, size_t len);
+
 /**
  * A structure describing a PCI driver.
  */
@@ -120,8 +160,10 @@ struct rte_pci_driver {
 	struct rte_pci_bus *bus;           /**< PCI bus reference. */
 	pci_probe_t *probe;                /**< Device Probe function. */
 	pci_remove_t *remove;              /**< Device Remove function. */
+	pci_dma_map_t *dma_map;		   /**< device dma map function. */
+	pci_dma_unmap_t *dma_unmap;	   /**< device dma unmap function. */
 	const struct rte_pci_id *id_table; /**< ID table, NULL terminated. */
-	uint32_t drv_flags;                /**< Flags contolling handling of device. */
+	uint32_t drv_flags;                /**< Flags RTE_PCI_DRV_*. */
 };
 
 /**
@@ -137,14 +179,16 @@ struct rte_pci_bus {
 #define RTE_PCI_DRV_NEED_MAPPING 0x0001
 /** Device needs PCI BAR mapping with enabled write combining (wc) */
 #define RTE_PCI_DRV_WC_ACTIVATE 0x0002
+/** Device already probed can be probed again to check for new ports. */
+#define RTE_PCI_DRV_PROBE_AGAIN 0x0004
 /** Device driver supports link state interrupt */
 #define RTE_PCI_DRV_INTR_LSC	0x0008
 /** Device driver supports device removal interrupt */
 #define RTE_PCI_DRV_INTR_RMV 0x0010
 /** Device driver needs to keep mapped resources if unsupported dev detected */
 #define RTE_PCI_DRV_KEEP_MAPPED_RES 0x0020
-/** Device driver supports IOVA as VA */
-#define RTE_PCI_DRV_IOVA_AS_VA 0X0040
+/** Device driver needs IOVA as VA and cannot work with IOVA as PA */
+#define RTE_PCI_DRV_NEED_IOVA_AS_VA 0x0040
 
 /**
  * Map the PCI device resources in user space virtual memory address
@@ -219,6 +263,8 @@ void rte_pci_unregister(struct rte_pci_driver *driver);
  *   The length of the data buffer.
  * @param offset
  *   The offset into PCI config space
+ * @return
+ *  Number of bytes read on success, negative on error.
  */
 int rte_pci_read_config(const struct rte_pci_device *device,
 		void *buf, size_t len, off_t offset);