X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=drivers%2Fnet%2Fbnxt%2Fhsi_struct_def_dpdk.h;h=b3980c151901d96b24477fca5e92b018b8dc8879;hb=9b77f1fe303f1f9b6e5af0428d03fe07f17687a9;hp=7cb93b7dd786d100ebf2e695b095025d5ff29c6f;hpb=428e4dfc0569fad2eb031240a9ac6b9b1b7bac45;p=dpdk.git diff --git a/drivers/net/bnxt/hsi_struct_def_dpdk.h b/drivers/net/bnxt/hsi_struct_def_dpdk.h index 7cb93b7dd7..b3980c1519 100644 --- a/drivers/net/bnxt/hsi_struct_def_dpdk.h +++ b/drivers/net/bnxt/hsi_struct_def_dpdk.h @@ -1,5 +1,5 @@ /* SPDX-License-Identifier: BSD-3-Clause - * Copyright (c) 2014-2020 Broadcom Inc. + * Copyright (c) 2014-2021 Broadcom Inc. * All rights reserved. * * DO NOT MODIFY!!! This file is automatically generated. @@ -392,7 +392,11 @@ struct cmd_nums { #define HWRM_PORT_PHY_MDIO_BUS_ACQUIRE UINT32_C(0xb7) #define HWRM_PORT_PHY_MDIO_BUS_RELEASE UINT32_C(0xb8) #define HWRM_PORT_QSTATS_EXT_PFC_WD UINT32_C(0xb9) - #define HWRM_PORT_ECN_QSTATS UINT32_C(0xba) + /* Reserved. */ + #define HWRM_RESERVED7 UINT32_C(0xba) + #define HWRM_PORT_TX_FIR_CFG UINT32_C(0xbb) + #define HWRM_PORT_TX_FIR_QCFG UINT32_C(0xbc) + #define HWRM_PORT_ECN_QSTATS UINT32_C(0xbd) #define HWRM_FW_RESET UINT32_C(0xc0) #define HWRM_FW_QSTATUS UINT32_C(0xc1) #define HWRM_FW_HEALTH_CHECK UINT32_C(0xc2) @@ -677,6 +681,12 @@ struct cmd_nums { /* Experimental */ #define HWRM_TF_TBL_TYPE_SET UINT32_C(0x2db) /* Experimental */ + #define HWRM_TF_TBL_TYPE_BULK_GET UINT32_C(0x2dc) + /* Experimental */ + #define HWRM_TF_CTXT_MEM_ALLOC UINT32_C(0x2e2) + /* Experimental */ + #define HWRM_TF_CTXT_MEM_FREE UINT32_C(0x2e3) + /* Experimental */ #define HWRM_TF_CTXT_MEM_RGTR UINT32_C(0x2e4) /* Experimental */ #define HWRM_TF_CTXT_MEM_UNRGTR UINT32_C(0x2e5) @@ -860,6 +870,11 @@ struct ret_codes { * may try again later. */ #define HWRM_ERR_CODE_BUSY UINT32_C(0x10) + /* + * This error code is reported by Firmware when an operation requested + * by the host is not allowed due to a secure lock violation. + */ + #define HWRM_ERR_CODE_RESOURCE_LOCKED UINT32_C(0x11) /* * This value indicates that the HWRM response is in TLV format and * should be interpreted as one or more TLVs starting with the @@ -947,8 +962,8 @@ struct hwrm_err_output { #define HWRM_VERSION_MINOR 10 #define HWRM_VERSION_UPDATE 1 /* non-zero means beta version */ -#define HWRM_VERSION_RSVD 56 -#define HWRM_VERSION_STR "1.10.1.56" +#define HWRM_VERSION_RSVD 70 +#define HWRM_VERSION_STR "1.10.1.70" /**************** * hwrm_ver_get * @@ -1499,6 +1514,645 @@ struct hwrm_ver_get_output { uint8_t valid; } __rte_packed; +/* cfa_bds_read_cmd_data_msg (size:128b/16B) */ +struct cfa_bds_read_cmd_data_msg { + /* This value selects the format for the mid-path command for the CFA. */ + uint8_t opcode; + /* + * This is read command. From 32 to 128B can be read from a table + * using this command. + */ + #define CFA_BDS_READ_CMD_DATA_MSG_OPCODE_READ UINT32_C(0x0) + #define CFA_BDS_READ_CMD_DATA_MSG_OPCODE_LAST \ + CFA_BDS_READ_CMD_DATA_MSG_OPCODE_READ + /* This value selects the table type to be acted upon. */ + uint8_t table_type; + /* This value selects the table type to be acted upon. */ + #define CFA_BDS_READ_CMD_DATA_MSG_TABLE_TYPE_MASK UINT32_C(0xf) + #define CFA_BDS_READ_CMD_DATA_MSG_TABLE_TYPE_SFT 0 + /* This command acts on the action table of the specified scope. */ + #define CFA_BDS_READ_CMD_DATA_MSG_TABLE_TYPE_ACTION UINT32_C(0x0) + /* This command acts on the exact match table of the specified scope. */ + #define CFA_BDS_READ_CMD_DATA_MSG_TABLE_TYPE_EM UINT32_C(0x1) + #define CFA_BDS_READ_CMD_DATA_MSG_TABLE_TYPE_LAST \ + CFA_BDS_READ_CMD_DATA_MSG_TABLE_TYPE_EM + /* This value selects which table scope will be accessed. */ + uint8_t table_scope; + #define CFA_BDS_READ_CMD_DATA_MSG_TABLE_SCOPE_MASK UINT32_C(0x1f) + #define CFA_BDS_READ_CMD_DATA_MSG_TABLE_SCOPE_SFT 0 + /* + * This value identifies the number of 32B units will be accessed. A + * value of zero is invalid. Maximum value is 4. + */ + uint8_t data_size; + #define CFA_BDS_READ_CMD_DATA_MSG_DATA_SIZE_MASK UINT32_C(0x7) + #define CFA_BDS_READ_CMD_DATA_MSG_DATA_SIZE_SFT 0 + /* This is the 32B index into the selected table to access. */ + uint32_t table_index; + #define CFA_BDS_READ_CMD_DATA_MSG_TABLE_INDEX_MASK UINT32_C(0x3ffffff) + #define CFA_BDS_READ_CMD_DATA_MSG_TABLE_INDEX_SFT 0 + /* + * This is the 64b host address where you want the data returned to. The + * data will be written to the same function as the one that owns the SQ + * this command is read from. The bottom two bits of this value must be + * zero. The size of the write is controlled by the data_size field. + */ + uint64_t host_address; +} __rte_packed; + +/* cfa_bds_write_cmd_data_msg (size:1152b/144B) */ +struct cfa_bds_write_cmd_data_msg { + /* This value selects the format for the mid-path command for the CFA. */ + uint8_t opcode; + /* + * This is write command. From 32 to 128B can be written to a table + * using this command. + */ + #define CFA_BDS_WRITE_CMD_DATA_MSG_OPCODE_WRITE UINT32_C(0x1) + #define CFA_BDS_WRITE_CMD_DATA_MSG_OPCODE_LAST \ + CFA_BDS_WRITE_CMD_DATA_MSG_OPCODE_WRITE + /* This value selects the table type to be acted upon. */ + uint8_t write_thru_table_type; + /* This value selects the table type to be acted upon. */ + #define CFA_BDS_WRITE_CMD_DATA_MSG_TABLE_TYPE_MASK UINT32_C(0xf) + #define CFA_BDS_WRITE_CMD_DATA_MSG_TABLE_TYPE_SFT 0 + /* This command acts on the action table of the specified scope. */ + #define CFA_BDS_WRITE_CMD_DATA_MSG_TABLE_TYPE_ACTION UINT32_C(0x0) + /* This command acts on the exact match table of the specified scope. */ + #define CFA_BDS_WRITE_CMD_DATA_MSG_TABLE_TYPE_EM UINT32_C(0x1) + #define CFA_BDS_WRITE_CMD_DATA_MSG_TABLE_TYPE_LAST \ + CFA_BDS_WRITE_CMD_DATA_MSG_TABLE_TYPE_EM + /* + * Indicates write-through control. Indicates write-through when set, + * or write back when cleared. + */ + #define CFA_BDS_WRITE_CMD_DATA_MSG_WRITE_THRU UINT32_C(0x10) + /* This value selects which table scope will be accessed. */ + uint8_t table_scope; + #define CFA_BDS_WRITE_CMD_DATA_MSG_TABLE_SCOPE_MASK UINT32_C(0x1f) + #define CFA_BDS_WRITE_CMD_DATA_MSG_TABLE_SCOPE_SFT 0 + /* + * This value identifies the number of 32B units will be accessed. A + * value of zero is invalid. Maximum value is 4. + */ + uint8_t data_size; + #define CFA_BDS_WRITE_CMD_DATA_MSG_DATA_SIZE_MASK UINT32_C(0x7) + #define CFA_BDS_WRITE_CMD_DATA_MSG_DATA_SIZE_SFT 0 + /* This is the 32B index into the selected table to access. */ + uint32_t table_index; + #define CFA_BDS_WRITE_CMD_DATA_MSG_TABLE_INDEX_MASK UINT32_C(0x3ffffff) + #define CFA_BDS_WRITE_CMD_DATA_MSG_TABLE_INDEX_SFT 0 + uint32_t unused0; + uint32_t unused1; + /* + * This is the data to be written. Data length is determined by the + * data_size field. The bd_cnt in the encapsulating BD must also be set + * correctly to ensure that the BD is processed correctly and the full + * WRITE_CMD message is extracted from the BD. + */ + uint32_t dta[32]; +} __rte_packed; + +/* cfa_bds_read_clr_cmd_data_msg (size:192b/24B) */ +struct cfa_bds_read_clr_cmd_data_msg { + /* This value selects the format for the mid-path command for the CFA. */ + uint8_t opcode; + /* + * This is read-clear command. 32B can be read from a table and + * a 16b mask can be used to clear specific 16b units after the + * read as an atomic operation. + */ + #define CFA_BDS_READ_CLR_CMD_DATA_MSG_OPCODE_READ_CLR UINT32_C(0x2) + #define CFA_BDS_READ_CLR_CMD_DATA_MSG_OPCODE_LAST \ + CFA_BDS_READ_CLR_CMD_DATA_MSG_OPCODE_READ_CLR + /* This value selects the table type to be acted upon. */ + uint8_t table_type; + /* This value selects the table type to be acted upon. */ + #define CFA_BDS_READ_CLR_CMD_DATA_MSG_TABLE_TYPE_MASK UINT32_C(0xf) + #define CFA_BDS_READ_CLR_CMD_DATA_MSG_TABLE_TYPE_SFT 0 + /* This command acts on the action table of the specified scope. */ + #define CFA_BDS_READ_CLR_CMD_DATA_MSG_TABLE_TYPE_ACTION UINT32_C(0x0) + /* This command acts on the exact match table of the specified scope. */ + #define CFA_BDS_READ_CLR_CMD_DATA_MSG_TABLE_TYPE_EM UINT32_C(0x1) + #define CFA_BDS_READ_CLR_CMD_DATA_MSG_TABLE_TYPE_LAST \ + CFA_BDS_READ_CLR_CMD_DATA_MSG_TABLE_TYPE_EM + /* This value selects which table scope will be accessed. */ + uint8_t table_scope; + #define CFA_BDS_READ_CLR_CMD_DATA_MSG_TABLE_SCOPE_MASK UINT32_C(0x1f) + #define CFA_BDS_READ_CLR_CMD_DATA_MSG_TABLE_SCOPE_SFT 0 + uint8_t unused0; + /* This is the 32B index into the selected table to access. */ + uint32_t table_index; + #define CFA_BDS_READ_CLR_CMD_DATA_MSG_TABLE_INDEX_MASK \ + UINT32_C(0x3ffffff) + #define CFA_BDS_READ_CLR_CMD_DATA_MSG_TABLE_INDEX_SFT 0 + /* + * This is the 64b host address where you want the data returned to. The + * data will be written to the same function as the one that owns the SQ + * this command is read from. The bottom two bits of this value must be + * zero. The size of the write is controlled by the data_size field. + */ + uint64_t host_address; + /* + * This is active high clear mask for the 32B of data that this command + * can read. Bit 0 of the field will clear bits 15:0 of the first word + * of data read when set to '1'. + */ + uint16_t clear_mask; + uint16_t unused1[3]; +} __rte_packed; + +/* cfa_bds_em_insert_cmd_data_msg (size:1152b/144B) */ +struct cfa_bds_em_insert_cmd_data_msg { + /* This value selects the format for the mid-path command for the CFA. */ + uint8_t opcode; + /* + * An exact match table insert will be attempted into the table. + * If there is a free location in the bucket, the payload will + * be written to the bucket. + */ + #define CFA_BDS_EM_INSERT_CMD_DATA_MSG_OPCODE_EM_INSERT UINT32_C(0x3) + #define CFA_BDS_EM_INSERT_CMD_DATA_MSG_OPCODE_LAST \ + CFA_BDS_EM_INSERT_CMD_DATA_MSG_OPCODE_EM_INSERT + /* + * Indicates write-through control. Indicates write-through when set, + * or write back when cleared. + */ + uint8_t write_thru; + #define CFA_BDS_EM_INSERT_CMD_DATA_MSG_UNUSED_MASK UINT32_C(0xf) + #define CFA_BDS_EM_INSERT_CMD_DATA_MSG_UNUSED_SFT 0 + /* + * Indicates write-through control. Indicates write-through when set, + * or write back when cleared. + */ + #define CFA_BDS_EM_INSERT_CMD_DATA_MSG_WRITE_THRU UINT32_C(0x10) + /* This value selects which table scope will be accessed. */ + uint8_t table_scope; + #define CFA_BDS_EM_INSERT_CMD_DATA_MSG_TABLE_SCOPE_MASK UINT32_C(0x1f) + #define CFA_BDS_EM_INSERT_CMD_DATA_MSG_TABLE_SCOPE_SFT 0 + /* + * This value identifies the number of 32B units will be accessed. A + * value of zero is invalid. Maximum value is 4. + */ + uint8_t data_size; + #define CFA_BDS_EM_INSERT_CMD_DATA_MSG_DATA_SIZE_MASK UINT32_C(0x7) + #define CFA_BDS_EM_INSERT_CMD_DATA_MSG_DATA_SIZE_SFT 0 + /* This is the 32B index into the selected table to access. */ + uint32_t table_index; + #define CFA_BDS_EM_INSERT_CMD_DATA_MSG_TABLE_INDEX_MASK \ + UINT32_C(0x3ffffff) + #define CFA_BDS_EM_INSERT_CMD_DATA_MSG_TABLE_INDEX_SFT 0 + /* + * This is the 64b host address where you want the data returned to. The + * data will be written to the same function as the one that owns the SQ + */ + uint64_t host_address; + /* + * This is the Exact Match Lookup Record. Data length is determined by + * the data_size field. The bd_cnt in the encapsulating BD must also be + */ + uint32_t dta[32]; +} __rte_packed; + +/* cfa_bds_em_delete_cmd_data_msg (size:192b/24B) */ +struct cfa_bds_em_delete_cmd_data_msg { + /* This value selects the format for the mid-path command for the CFA. */ + uint8_t opcode; + /* An exact match table delete will be attempted. */ + #define CFA_BDS_EM_DELETE_CMD_DATA_MSG_OPCODE_EM_DELETE UINT32_C(0x4) + #define CFA_BDS_EM_DELETE_CMD_DATA_MSG_OPCODE_LAST \ + CFA_BDS_EM_DELETE_CMD_DATA_MSG_OPCODE_EM_DELETE + /* + * Indicates write-through control. Indicates write-through when set, + * or write back when cleared. + */ + uint8_t write_thru; + #define CFA_BDS_EM_DELETE_CMD_DATA_MSG_UNUSED_MASK UINT32_C(0xf) + #define CFA_BDS_EM_DELETE_CMD_DATA_MSG_UNUSED_SFT 0 + /* + * Indicates write-through control. Indicates write-through when set, + * or write back when cleared. + */ + #define CFA_BDS_EM_DELETE_CMD_DATA_MSG_WRITE_THRU UINT32_C(0x10) + /* This value selects which table scope will be accessed. */ + uint8_t table_scope; + #define CFA_BDS_EM_DELETE_CMD_DATA_MSG_TABLE_SCOPE_MASK UINT32_C(0x1f) + #define CFA_BDS_EM_DELETE_CMD_DATA_MSG_TABLE_SCOPE_SFT 0 + /* + * This value identifies the number of 32B units will be accessed. A + * value of zero is invalid. Maximum value is 4. + */ + uint8_t data_size; + #define CFA_BDS_EM_DELETE_CMD_DATA_MSG_DATA_SIZE_MASK UINT32_C(0x7) + #define CFA_BDS_EM_DELETE_CMD_DATA_MSG_DATA_SIZE_SFT 0 + uint32_t unused0; + /* + * This is the 64b host address where you want the data returned to. The + * data will be written to the same function as the one that owns the SQ + */ + uint64_t host_address; + /* + * This is the Exact Match Lookup Record. Data length is determined by + * the data_size field. The bd_cnt in the encapsulating BD must also be + */ + uint64_t dta; +} __rte_packed; + +/* cfa_bds_invalidate_cmd_data_msg (size:64b/8B) */ +struct cfa_bds_invalidate_cmd_data_msg { + /* This value selects the format for the mid-path command for the CFA. */ + uint8_t opcode; + /* + * The specified table area will be invalidated. If it is needed. + * again, it will be read from the backing store. + */ + #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_OPCODE_INVALIDATE UINT32_C(0x5) + #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_OPCODE_LAST \ + CFA_BDS_INVALIDATE_CMD_DATA_MSG_OPCODE_INVALIDATE + /* This value selects the table type to be acted upon. */ + uint8_t table_type; + /* This value selects the table type to be acted upon. */ + #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_TABLE_TYPE_MASK UINT32_C(0xf) + #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_TABLE_TYPE_SFT 0 + /* This command acts on the action table of the specified scope. */ + #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_TABLE_TYPE_ACTION \ + UINT32_C(0x0) + /* This command acts on the exact match table of the specified scope. */ + #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_TABLE_TYPE_EM \ + UINT32_C(0x1) + #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_TABLE_TYPE_LAST \ + CFA_BDS_INVALIDATE_CMD_DATA_MSG_TABLE_TYPE_EM + /* This value selects which table scope will be accessed. */ + uint8_t table_scope; + #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_TABLE_SCOPE_MASK UINT32_C(0x1f) + #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_TABLE_SCOPE_SFT 0 + uint8_t unused0; + /* This is the 32B index into the selected table to access. */ + uint32_t table_index; + #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_TABLE_INDEX_MASK \ + UINT32_C(0x3ffffff) + #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_TABLE_INDEX_SFT 0 +} __rte_packed; + +/* cfa_bds_event_collect_cmd_data_msg (size:128b/16B) */ +struct cfa_bds_event_collect_cmd_data_msg { + /* This value selects the format for the mid-path command for the CFA. */ + uint8_t opcode; + /* Reads notification messages from the Host Notification Queue. */ + #define CFA_BDS_EVENT_COLLECT_CMD_DATA_MSG_OPCODE_EVENT_COLLECT \ + UINT32_C(0x6) + #define CFA_BDS_EVENT_COLLECT_CMD_DATA_MSG_OPCODE_LAST \ + CFA_BDS_EVENT_COLLECT_CMD_DATA_MSG_OPCODE_EVENT_COLLECT + uint8_t unused0; + /* This value selects which table scope will be accessed. */ + uint8_t table_scope; + #define CFA_BDS_EVENT_COLLECT_CMD_DATA_MSG_TABLE_SCOPE_MASK \ + UINT32_C(0x1f) + #define CFA_BDS_EVENT_COLLECT_CMD_DATA_MSG_TABLE_SCOPE_SFT 0 + /* + * This value identifies the number of 32B units will be accessed. A + * value of zero is invalid. Maximum value is 4. + */ + uint8_t data_size; + #define CFA_BDS_EVENT_COLLECT_CMD_DATA_MSG_DATA_SIZE_MASK UINT32_C(0x7) + #define CFA_BDS_EVENT_COLLECT_CMD_DATA_MSG_DATA_SIZE_SFT 0 + uint32_t unused1; + /* + * This is the 64b host address where you want the data returned to. The + * data will be written to the same function as the one that owns the SQ + */ + uint64_t host_address; +} __rte_packed; + +/* ce_bds_add_data_msg (size:512b/64B) */ +struct ce_bds_add_data_msg { + uint32_t version_algorithm_kid_opcode; + /* + * This value selects the operation for the mid-path command for the + * crypto blocks. + */ + #define CE_BDS_ADD_DATA_MSG_OPCODE_MASK UINT32_C(0xf) + #define CE_BDS_ADD_DATA_MSG_OPCODE_SFT 0 + /* + * This is the add command. Using this opcode, Host Driver can add + * information required for kTLS processing. The information is + * updated in the CFCK context. + */ + #define CE_BDS_ADD_DATA_MSG_OPCODE_ADD UINT32_C(0x1) + #define CE_BDS_ADD_DATA_MSG_OPCODE_LAST \ + CE_BDS_ADD_DATA_MSG_OPCODE_ADD + /* + * This field is the Crypto Context ID. The KID is used to store + * information used by the associated kTLS offloaded connection. + */ + #define CE_BDS_ADD_DATA_MSG_KID_MASK \ + UINT32_C(0xfffff0) + #define CE_BDS_ADD_DATA_MSG_KID_SFT 4 + /* + * Currently only two algorithms are supported, AES_GCM_128 and + * AES_GCM_256. Additional bits for future growth. + */ + #define CE_BDS_ADD_DATA_MSG_ALGORITHM_MASK \ + UINT32_C(0xf000000) + #define CE_BDS_ADD_DATA_MSG_ALGORITHM_SFT 24 + /* AES_GCM_128 Algorithm */ + #define CE_BDS_ADD_DATA_MSG_ALGORITHM_AES_GCM_128 \ + UINT32_C(0x1000000) + /* AES_GCM_256 Algorithm */ + #define CE_BDS_ADD_DATA_MSG_ALGORITHM_AES_GCM_256 \ + UINT32_C(0x2000000) + /* + * Version number of TLS connection. HW will provide registers that + * converts the 4b encoded version number to 16b of actual version + * number in the TLS Header. * Initialized --> By mid-path command * + * Updated --> Never though another mid-path command will result in an + * update. + */ + #define CE_BDS_ADD_DATA_MSG_VERSION_MASK \ + UINT32_C(0xf0000000) + #define CE_BDS_ADD_DATA_MSG_VERSION_SFT 28 + /* TLS1.2 Version */ + #define CE_BDS_ADD_DATA_MSG__TLS1_2 \ + (UINT32_C(0x0) << 28) + /* TLS1.3 Version */ + #define CE_BDS_ADD_DATA_MSG__TLS1_3 \ + (UINT32_C(0x1) << 28) + #define CE_BDS_ADD_DATA_MSG__LAST \ + CE_BDS_ADD_DATA_MSG__TLS1_3 + /* + * Command Type in the TLS header. HW will provide registers that + * converts the 3b encoded command type to 8b of actual command type in + * the TLS Header. * Initialized --> By mid-path command * Updated --> + * Never though another mid-path command will result in an update + */ + uint8_t cmd_type; + #define CE_BDS_ADD_DATA_MSG_CMD_TYPE_MASK UINT32_C(0x7) + #define CE_BDS_ADD_DATA_MSG_CMD_TYPE_SFT 0 + /* Application */ + #define CE_BDS_ADD_DATA_MSG_CMD_TYPE_APP UINT32_C(0x0) + #define CE_BDS_ADD_DATA_MSG_CMD_TYPE_LAST \ + CE_BDS_ADD_DATA_MSG_CMD_TYPE_APP + uint8_t unused0[3]; + /* + * Salt is part of the nonce that is used as the Initial Vector (IV) in + * AES-GCM cipher suites. These are exchanged as part of the handshake + * process and is either the client_write_iv (when the client is + * sending) or server_write_iv (when the server is sending). In + * TLS1.2, 4B of Salt is concatenated with 8B of explicit_nonce to + * generate the 12B of IV. In TLS1.3, 8B of TLS record sequence number + * is zero padded to 12B and then xor'ed with the 4B of salt to generate + * the 12B of IV. This value is initialized by this mid-path command. + */ + uint32_t salt; + uint32_t unused1; + /* + * This field keeps track of the TCP sequence number that is expected as + * the first byte in the next TCP packet. This field is calculated by HW + * using the output of the parser. The field is initialized as part of + * the Mid-path BD download/update of a kTLS connection. For every TCP + * packet processed, TCE HW will update the value to Current packet TCP + * sequence number + Current packet TCP Payload Length. + */ + uint32_t pkt_tcp_seq_num; + /* + * This field maintains the TCP sequence number of the first byte in the + * header of the active TLS record. This field is initialized as part of + * the Mid-path BD download/update of a kTLS connection. For every + * record that is processed, TCE HW copies the value from the + * next_tls_header_tcp_seq_num field. + */ + uint32_t tls_header_tcp_seq_num; + /* + * This is sequence number for the TLS record in a particular session. + * In TLS1.2, record sequence number is part of the Associated Data (AD) + * in the AEAD algorithm. In TLS1.3, record sequence number is part of + * the Initial Vector (IV). The field is initialized as part of the + * mid-path BD download/update of a kTLS connection. TCE HW increments + * the field after that for every record processed as it parses the TCP + * packet. + */ + uint32_t record_seq_num[2]; + /* + * Key used for encrypting or decrypting TLS records. The Key is + * exchanged during the hand-shake protocol by the client-server and + * provided to HW through this mid-path BD. + */ + uint32_t session_key[8]; +} __rte_packed; + +/* ce_bds_delete_data_msg (size:64b/8B) */ +struct ce_bds_delete_data_msg { + uint32_t kid_opcode; + /* + * This value selects the operation for the mid-path command for the + * crypto blocks. + */ + #define CE_BDS_DELETE_DATA_MSG_OPCODE_MASK UINT32_C(0xf) + #define CE_BDS_DELETE_DATA_MSG_OPCODE_SFT 0 + /* + * This is the delete command. Using this opcode, the host Driver + * can remove a key context from the CFCK. If context is deleted + * and packets with the same KID come through the pipeline, the + * following actions are taken. For transmit packets, no crypto + * operation will be performed, payload will be zero'ed out. For + * receive packets, no crypto operation will be performed, + * payload will be unmodified. + */ + #define CE_BDS_DELETE_DATA_MSG_OPCODE_DELETE UINT32_C(0x2) + #define CE_BDS_DELETE_DATA_MSG_OPCODE_LAST \ + CE_BDS_DELETE_DATA_MSG_OPCODE_DELETE + /* + * This field is the Crypto Context ID. The KID is used to store + * information used by the associated kTLS offloaded connection. + */ + #define CE_BDS_DELETE_DATA_MSG_KID_MASK UINT32_C(0xfffff0) + #define CE_BDS_DELETE_DATA_MSG_KID_SFT 4 + uint32_t unused0; +} __rte_packed; + +/* ce_bds_resync_resp_ack_msg (size:128b/16B) */ +struct ce_bds_resync_resp_ack_msg { + uint32_t resync_status_kid_opcode; + /* + * This value selects the operation for the mid-path command for the + * crypto blocks. + */ + #define CE_BDS_RESYNC_RESP_ACK_MSG_OPCODE_MASK UINT32_C(0xf) + #define CE_BDS_RESYNC_RESP_ACK_MSG_OPCODE_SFT 0 + /* + * This command is used by the driver as a response to the resync + * request sent by the crypto engine. + */ + #define CE_BDS_RESYNC_RESP_ACK_MSG_OPCODE_RESYNC UINT32_C(0x3) + #define CE_BDS_RESYNC_RESP_ACK_MSG_OPCODE_LAST \ + CE_BDS_RESYNC_RESP_ACK_MSG_OPCODE_RESYNC + /* + * This field is the Crypto Context ID. The KID is used to store + * information used by the associated kTLS offloaded connection. + */ + #define CE_BDS_RESYNC_RESP_ACK_MSG_KID_MASK UINT32_C(0xfffff0) + #define CE_BDS_RESYNC_RESP_ACK_MSG_KID_SFT 4 + /* + * This field indicates if the resync request resulted in a success or + * a failure. + */ + #define CE_BDS_RESYNC_RESP_ACK_MSG_RESYNC_STATUS \ + UINT32_C(0x1000000) + /* + * An ACK indicates that the driver was able to find the TLS record + * associated with TCP sequence number provided by the HW + */ + #define CE_BDS_RESYNC_RESP_ACK_MSG_RESYNC_STATUS_ACK \ + (UINT32_C(0x0) << 24) + #define CE_BDS_RESYNC_RESP_ACK_MSG_RESYNC_STATUS_LAST \ + CE_BDS_RESYNC_RESP_ACK_MSG_RESYNC_STATUS_ACK + /* + * This field is the echo of the TCP sequence number provided in the + * resync request by the HW. If HW sent multiple resync requests, it + * only tracks the latest TCP sequence number. When the response from + * the Driver doesn't match the latest request, HW will drop the resync + * response. + */ + uint32_t resync_record_tcp_seq_num; + /* + * This field indicates the TLS record sequence number associated with + * the resync request. HW will take this number and add the delta records + * it has found since sending the resync request, update the context and + * resume decrypting records. + */ + uint32_t resync_record_seq_num[2]; +} __rte_packed; + +/* ce_bds_resync_resp_nack_msg (size:64b/8B) */ +struct ce_bds_resync_resp_nack_msg { + uint32_t resync_status_kid_opcode; + /* + * This value selects the operation for the mid-path command for the + * crypto blocks. + */ + #define CE_BDS_RESYNC_RESP_NACK_MSG_OPCODE_MASK UINT32_C(0xf) + #define CE_BDS_RESYNC_RESP_NACK_MSG_OPCODE_SFT 0 + /* + * This command is used by the driver as a response to the resync + * request sent by the crypto engine. + */ + #define CE_BDS_RESYNC_RESP_NACK_MSG_OPCODE_RESYNC UINT32_C(0x3) + #define CE_BDS_RESYNC_RESP_NACK_MSG_OPCODE_LAST \ + CE_BDS_RESYNC_RESP_NACK_MSG_OPCODE_RESYNC + /* + * This field is the Crypto Context ID. The KID is used to store + * information used by the associated kTLS offloaded connection. + */ + #define CE_BDS_RESYNC_RESP_NACK_MSG_KID_MASK \ + UINT32_C(0xfffff0) + #define CE_BDS_RESYNC_RESP_NACK_MSG_KID_SFT 4 + /* + * This field indicates if the resync request resulted in a success or + * a failure. + */ + #define CE_BDS_RESYNC_RESP_NACK_MSG_RESYNC_STATUS \ + UINT32_C(0x1000000) + /* + * An NAK indicates that the driver wasn't able to find the TLS + * record associated with TCP sequence number provided by the HW + */ + #define CE_BDS_RESYNC_RESP_NACK_MSG_RESYNC_STATUS_NACK \ + (UINT32_C(0x1) << 24) + #define CE_BDS_RESYNC_RESP_NACK_MSG_RESYNC_STATUS_LAST \ + CE_BDS_RESYNC_RESP_NACK_MSG_RESYNC_STATUS_NACK + /* + * This field is the echo of the TCP sequence number provided in the + * resync request by the HW. If HW sent multiple resync requests, it + * only tracks the latest TCP sequence number. When the response from + * the Driver doesn't match the latest request, HW will drop the resync + * response. + */ + uint32_t resync_record_tcp_seq_num; +} __rte_packed; + +/* crypto_presync_bd_cmd (size:256b/32B) */ +struct crypto_presync_bd_cmd { + uint8_t flags; + /* + * Typically, presync BDs are used for packet retransmissions. Source + * port sends all the packets in order over the network to destination + * port and packets get dropped in the network. The destination port + * will request retranmission of dropped packets and source port driver + * will send presync BD to setup the transmitter appropriately. It will + * provide the start and end TCP sequence number of the data to be + * transmitted. HW keeps two sets of context variable, one for in order + * traffic and one for retransmission traffic. HW is designed to + * transmit everything posted in the presync BD and return to in order + * mode after that. No inorder context variables are updated in the + * process. There is a special case where packets can be dropped + * between the TCP stack and Device Driver (Berkeley Packet Filter for + * ex) and HW still needs to transmit rest of the traffic. In this + * mode, driver will send a presync BD as if it is a retransmission but + * at the end of the transmission, the in order variables need to be + * updated. This flag is used by driver to indicate that in order + * variables needs to be updated at the end of completing the task + * associated with the presync BD. + */ + #define CRYPTO_PRESYNC_BD_CMD_FLAGS_UPDATE_IN_ORDER_VAR \ + UINT32_C(0x1) + uint8_t unused0; + uint16_t unused1; + /* + * This field maintains the TCP sequence number of the first byte in the + * Header of the active TLS record. This field is set to 0 during + * mid-path BD updates, but is set to correct value when a presync BD is + * detected. For every record that is processed, the value from the + * next_tls_header_tcp_seq_num field is copied. + */ + uint32_t header_tcp_seq_num; + /* + * When a retransmitted packet has a TLS authentication TAG present and + * the data spans multiple TCP Packets, HW is required to read the entire + * record to recalculate the TAG but only transmit what is required. This + * field is the start TCP sequence number of the packet(s) that need to + * be re-transmitted. This field is initialized to 0 during Mid-path BD + * add command and initialized to value provided by the driver when + * Pre-sync BD is detected. This field is never updated unless another + * Pre-sync BD signaling a new retransmission is scheduled. + */ + uint32_t start_tcp_seq_num; + /* + * When a retransmitted packet has a TLS authentication TAG present and + * the data spans multiple TCP Packets, HW is required to read the + * entire record to recalculate the TAG but only transmit what is + * required. This field is the end TCP sequence number of the packet(s) + * that need to be re-transmitted. This field is initialized to 0 during + * Mid-path BD add command and initialized to value provided by the + * driver when Pre-sync BD is detected. This field is never updated + * unless another Pre-sync BD signaling a new retransmission is + * scheduled. + */ + uint32_t end_tcp_seq_num; + /* + * For TLS1.2, an explicit nonce is used as part of the IV (concatenated + * with the SALT). For retans packets, this field is extracted from the + * TLS record, field right after the TLS Header and stored in the + * context. This field needs to be stored in context as TCP segmentation + * could have split the field into multiple TCP packets. This value is + * initialized to 0 when presync BD is detected by taking the value from + * the first TLS header. When subsequent TLS Headers are detected, the + * value is extracted from packet. + */ + uint32_t explicit_nonce[2]; + /* + * This is sequence number for the TLS record in a particular session. In + * TLS1.2, record sequence number is part of the Associated Data (AD) in + * the AEAD algorithm. In TLS1.3, record sequence number is part of the + * Initial Vector (IV). The field is initialized to 0 during Mid-path BD + * download. Is initialized to correct value when a pre-sync BD is + * detected. TCE HW increments the field after that for every record + * processed as it parses the TCP packet. Subsequent pre-sync BDs + * delivering more retransmission instruction will also update this + * field. + */ + uint32_t record_seq_num[2]; +} __rte_packed; + /* bd_base (size:64b/8B) */ struct bd_base { uint8_t type; @@ -1530,6 +2184,16 @@ struct bd_base { * RX Producer Assembly Buffer Descriptor. */ #define BD_BASE_TYPE_RX_PROD_AGG UINT32_C(0x6) + /* + * Indicates that this BD is used to issue a command to one of + * the mid-path destinations. + */ + #define BD_BASE_TYPE_TX_BD_MP_CMD UINT32_C(0x8) + /* + * Indicates that this BD is used to issue a cryptographic pre- + * sync command through the fast path and destined for TCE. + */ + #define BD_BASE_TYPE_TX_BD_PRESYNC_CMD UINT32_C(0x9) /* * Indicates that this BD is 32B long and is used for * normal L2 packet transmission. @@ -1642,7 +2306,12 @@ struct tx_bd_short { * used for any data that the driver wants to associate with the * transmit BD. * - * This field must be valid on the first BD of a packet. + * This field must be valid on the first BD of a packet. If completion + * coalescing is enabled on the TX ring, it is suggested that the driver + * populate the opaque field to indicate the specific TX ring with which + * the completion is associated, then utilize the opaque and sq_cons_idx + * fields in the coalesced completion record to determine the specific + * packets that are to be completed on that ring. */ uint32_t opaque; /* @@ -1745,11 +2414,16 @@ struct tx_bd_long { */ uint16_t len; /* - * The opaque data field is pass through to the completion and can be + * The opaque data field is passed through to the completion and can be * used for any data that the driver wants to associate with the * transmit BD. * - * This field must be valid on the first BD of a packet. + * This field must be valid on the first BD of a packet. If completion + * coalescing is enabled on the TX ring, it is suggested that the driver + * populate the opaque field to indicate the specific TX ring with which + * the completion is associated, then utilize the opaque and sq_cons_idx + * fields in the coalesced completion record to determine the specific + * packets that are to be completed on that ring. */ uint32_t opaque; /* @@ -1802,7 +2476,7 @@ struct tx_bd_long_hi { #define TX_BD_LONG_LFLAGS_NOCRC UINT32_C(0x4) /* * If set to 1, the device will record the time at which the packet - * was actually transmitted at the TX MAC. + * was actually transmitted at the TX MAC for 2-step time sync. * * This bit must be valid on the first BD of a packet. */ @@ -1829,9 +2503,9 @@ struct tx_bd_long_hi { * Send Offload) processing for both normal or encapsulated * packets, which is a form of TCP segmentation. When this bit * is 1, the hdr_size and mss fields must be valid. The driver - * doesn't need to set t_ip_chksum, ip_chksum, and tcp_udp_chksum - * flags since the controller will replace the appropriate - * checksum fields for segmented packets. + * doesn't need to set ot_ip_chksum, t_ip_chksum, ip_chksum, and + * tcp_udp_chksum flags since the controller will replace the + * appropriate checksum fields for segmented packets. * * When this bit is 1, the hdr_size and mss fields must be valid. */ @@ -1868,7 +2542,47 @@ struct tx_bd_long_hi { * packet. Packet must be a valid FCoE format packet. */ #define TX_BD_LONG_LFLAGS_FCOE_CRC UINT32_C(0x200) - uint16_t hdr_size; + /* + * If set to '1', then the timestamp from the BD is used. If cleared + * to 0, then TWE provides the timestamp. + */ + #define TX_BD_LONG_LFLAGS_BD_TS_EN UINT32_C(0x400) + /* + * If set to '1', this operation will cause a trace capture in each + * block it passes through. + */ + #define TX_BD_LONG_LFLAGS_DEBUG_TRACE UINT32_C(0x800) + /* + * If set to '1', the device will record the time at which the packet + * was actually transmitted at the TX MAC for 1-step time sync. This + * bit must be valid on the first BD of a packet. + */ + #define TX_BD_LONG_LFLAGS_STAMP_1STEP UINT32_C(0x1000) + /* + * If set to '1', the controller replaces the Outer-tunnel IP checksum + * field with hardware calculated IP checksum for the IP header of the + * packet associated with this descriptor. For outer UDP checksum, it + * will be the following behavior for all cases independent of settings + * of inner LSO and checksum offload BD flags. If outer UDP checksum + * is 0, then do not update it. If outer UDP checksum is non zero, then + * the hardware should compute and update it. + */ + #define TX_BD_LONG_LFLAGS_OT_IP_CHKSUM UINT32_C(0x2000) + /* + * If set to zero when LSO is '1', then the IPID of the Outer-tunnel IP + * header will not be modified during LSO operations. If set to one + * when LSO is '1', then the IPID of the Outer-tunnel IP header will be + * incremented for each subsequent segment of an LSO operation. The + * flag is ignored if the LSO packet is a normal (non-tunneled) TCP + * packet. + */ + #define TX_BD_LONG_LFLAGS_OT_IPID UINT32_C(0x4000) + /* + * If set to '1', When set to 1, KTLS encryption will be enabled for + * the packet. + */ + #define TX_BD_LONG_LFLAGS_CRYPTO_EN UINT32_C(0x8000) + uint16_t kid_or_ts_low_hdr_size; /* * When LSO is '1', this field must contain the offset of the * TCP payload from the beginning of the packet in as @@ -1878,9 +2592,16 @@ struct tx_bd_long_hi { * * This value must be valid on the first BD of a packet. */ - #define TX_BD_LONG_HDR_SIZE_MASK UINT32_C(0x1ff) - #define TX_BD_LONG_HDR_SIZE_SFT 0 - uint32_t mss; + #define TX_BD_LONG_HDR_SIZE_MASK UINT32_C(0x1ff) + #define TX_BD_LONG_HDR_SIZE_SFT 0 + /* + * If lflags.bd_ts_en is 1, this is the lower 7 bits of the 24-bit + * timestamp. If lflags.crypto_en is 1, this is the lower 7 bits of the + * 20-bit KID. + */ + #define TX_BD_LONG_KID_OR_TS_LOW_MASK UINT32_C(0xfe00) + #define TX_BD_LONG_KID_OR_TS_LOW_SFT 9 + uint32_t kid_or_ts_high_mss; /* * This is the MSS value that will be used to do the LSO processing. * The value is the length in bytes of the TCP payload for each @@ -1888,9 +2609,22 @@ struct tx_bd_long_hi { * * This value must be valid on the first BD of a packet. */ - #define TX_BD_LONG_MSS_MASK UINT32_C(0x7fff) - #define TX_BD_LONG_MSS_SFT 0 - uint16_t unused2; + #define TX_BD_LONG_MSS_MASK UINT32_C(0x7fff) + #define TX_BD_LONG_MSS_SFT 0 + /* + * If lflags.bd_ts_en is 1, this is the upper 17 bits of the 24-bit + * timestamp. If lflags.crypto_en is 1, the least significant 13 bits + * of this field contain the upper 13 bits of the 20-bit KID. + */ + #define TX_BD_LONG_KID_OR_TS_HIGH_MASK UINT32_C(0xffff8000) + #define TX_BD_LONG_KID_OR_TS_HIGH_SFT 15 + /* + * This value selects bits 25:16 of the CFA action to perform on the + * packet. See the cfa_action field for more information. + */ + uint16_t cfa_action_high; + #define TX_BD_LONG_CFA_ACTION_HIGH_MASK UINT32_C(0x3ff) + #define TX_BD_LONG_CFA_ACTION_HIGH_SFT 0 /* * This value selects a CFA action to perform on the packet. * Set this value to zero if no CFA action is desired. @@ -2025,7 +2759,12 @@ struct tx_bd_long_inline { /* * The opaque data field is passed through to the completion and can be * used for any data that the driver wants to associate with the transmit - * BD. + * BD. This field must be valid on the first BD of a packet. If + * completion coalescing is enabled on the TX ring, it is suggested that + * the driver populate the opaque field to indicate the specific TX ring + * with which the completion is associated, then utilize the opaque and + * sq_cons_idx fields in the coalesced completion record to determine + * the specific packets that are to be completed on that ring. * * This field must be valid on the first BD of a packet. */ @@ -2063,7 +2802,8 @@ struct tx_bd_long_inline { #define TX_BD_LONG_INLINE_LFLAGS_NOCRC UINT32_C(0x4) /* * If set to 1, the device will record the time at which the packet - * was actually transmitted at the TX MAC. + * was actually transmitted at the TX MAC for 2-step time sync. This + * bit must be valid on the first BD of a packet. */ #define TX_BD_LONG_INLINE_LFLAGS_STAMP UINT32_C(0x8) /* @@ -2092,9 +2832,73 @@ struct tx_bd_long_inline { * packet. Packet must be a valid FCoE format packet. */ #define TX_BD_LONG_INLINE_LFLAGS_FCOE_CRC UINT32_C(0x200) - uint16_t unused2; - uint32_t unused3; - uint16_t unused4; + /* + * If set to '1', then the timestamp from the BD is used. If cleared + * to 0, then TWE provides the timestamp. + */ + #define TX_BD_LONG_INLINE_LFLAGS_BD_TS_EN UINT32_C(0x400) + /* + * If set to '1', this operation will cause a trace capture in each + * block it passes through. + */ + #define TX_BD_LONG_INLINE_LFLAGS_DEBUG_TRACE UINT32_C(0x800) + /* + * If set to '1', the device will record the time at which the packet + * was actually transmitted at the TX MAC for 1-step time sync. This + * bit must be valid on the first BD of a packet. + */ + #define TX_BD_LONG_INLINE_LFLAGS_STAMP_1STEP UINT32_C(0x1000) + /* + * If set to '1', the controller replaces the Outer-tunnel IP checksum + * field with hardware calculated IP checksum for the IP header of the + * packet associated with this descriptor. For outer UDP checksum, it + * will be the following behavior for all cases independent of settings + * of inner LSO and checksum offload BD flags. If outer UDP checksum + * is 0, then do not update it. If outer UDP checksum is non zero, then + * the hardware should compute and update it. + */ + #define TX_BD_LONG_INLINE_LFLAGS_OT_IP_CHKSUM UINT32_C(0x2000) + /* + * If set to zero when LSO is '1', then the IPID of the Outer-tunnel IP + * header will not be modified during LSO operations. If set to one + * when LSO is '1', then the IPID of the Outer-tunnel IP header will be + * incremented for each subsequent segment of an LSO operation. The + * flag is ignored if the LSO packet is a normal (non-tunneled) TCP + * packet. + */ + #define TX_BD_LONG_INLINE_LFLAGS_OT_IPID UINT32_C(0x4000) + /* + * If set to '1', When set to 1, KTLS encryption will be enabled for + * the packet. + */ + #define TX_BD_LONG_INLINE_LFLAGS_CRYPTO_EN UINT32_C(0x8000) + uint8_t unused2; + uint8_t kid_or_ts_low; + #define TX_BD_LONG_INLINE_UNUSED UINT32_C(0x1) + /* + * If lflags.bd_ts_en is 1, this is the lower 7 bits of the 24-bit + * timestamp. If lflags.crypto_en is 1, this is the lower 7 bits of + * the 20-bit KID. + */ + #define TX_BD_LONG_INLINE_KID_OR_TS_LOW_MASK UINT32_C(0xfe) + #define TX_BD_LONG_INLINE_KID_OR_TS_LOW_SFT 1 + uint32_t kid_or_ts_high; + #define TX_BD_LONG_INLINE_UNUSED_MASK UINT32_C(0x7fff) + #define TX_BD_LONG_INLINE_UNUSED_SFT 0 + /* + * If lflags.bd_ts_en is 1, this is the upper 17 bits of the 24-bit + * timestamp. If lflags.crypto_en is 1, the least significant 13 bits + * of this field contain the upper 13 bits of the 20-bit KID. + */ + #define TX_BD_LONG_INLINE_KID_OR_TS_HIGH_MASK UINT32_C(0xffff8000) + #define TX_BD_LONG_INLINE_KID_OR_TS_HIGH_SFT 15 + /* + * This value selects bits 25:16 of the CFA action to perform on the + * packet. See the cfa_action field for more information. + */ + uint16_t cfa_action_high; + #define TX_BD_LONG_INLINE_CFA_ACTION_HIGH_MASK UINT32_C(0x3ff) + #define TX_BD_LONG_INLINE_CFA_ACTION_HIGH_SFT 0 /* * This value selects a CFA action to perform on the packet. * Set this value to zero if no CFA action is desired. @@ -2182,6 +2986,97 @@ struct tx_bd_empty { uint8_t unused_4[8]; } __rte_packed; +/* tx_bd_mp_cmd (size:128b/16B) */ +struct tx_bd_mp_cmd { + /* Unless otherwise stated, sub-fields of this field are always valid. */ + uint16_t flags_type; + /* This value identifies the type of buffer descriptor. */ + #define TX_BD_MP_CMD_TYPE_MASK UINT32_C(0x3f) + #define TX_BD_MP_CMD_TYPE_SFT 0 + /* + * Indicates that this BD is used to issue a command to one of + * the mid-path destinations. + */ + #define TX_BD_MP_CMD_TYPE_TX_BD_MP_CMD UINT32_C(0x8) + #define TX_BD_MP_CMD_TYPE_LAST TX_BD_MP_CMD_TYPE_TX_BD_MP_CMD + #define TX_BD_MP_CMD_FLAGS_MASK UINT32_C(0xffc0) + #define TX_BD_MP_CMD_FLAGS_SFT 6 + /* */ + #define TX_BD_MP_CMD_FLAGS_UNUSED_MASK UINT32_C(0xc0) + #define TX_BD_MP_CMD_FLAGS_UNUSED_SFT 6 + /* + * This value indicates the number of 16B BD locations (slots) + * consumed in the ring by this mid-path command BD, including the + * BD header and the command field. + */ + #define TX_BD_MP_CMD_FLAGS_BD_CNT_MASK UINT32_C(0x1f00) + #define TX_BD_MP_CMD_FLAGS_BD_CNT_SFT 8 + /* + * This value defines the length of command field in bytes. The maximum + * value shall be 496. + */ + uint16_t len; + /* + * The opaque data field is pass through to the completion and can be + * used for any data that the driver wants to associate with this + * Tx mid-path command. + */ + uint32_t opaque; + uint64_t unused1; +} __rte_packed; + +/* tx_bd_presync_cmd (size:128b/16B) */ +struct tx_bd_presync_cmd { + /* Unless otherwise stated, sub-fields of this field are always valid. */ + uint16_t flags_type; + /* This value identifies the type of buffer descriptor. */ + #define TX_BD_PRESYNC_CMD_TYPE_MASK UINT32_C(0x3f) + #define TX_BD_PRESYNC_CMD_TYPE_SFT 0 + /* + * Indicates that this BD is used to issue a cryptographic pre- + * sync command through the fast path and destined for TCE. + */ + #define TX_BD_PRESYNC_CMD_TYPE_TX_BD_PRESYNC_CMD UINT32_C(0x9) + #define TX_BD_PRESYNC_CMD_TYPE_LAST \ + TX_BD_PRESYNC_CMD_TYPE_TX_BD_PRESYNC_CMD + #define TX_BD_PRESYNC_CMD_FLAGS_MASK UINT32_C(0xffc0) + #define TX_BD_PRESYNC_CMD_FLAGS_SFT 6 + /* */ + #define TX_BD_PRESYNC_CMD_FLAGS_UNUSED_MASK UINT32_C(0xc0) + #define TX_BD_PRESYNC_CMD_FLAGS_UNUSED_SFT 6 + /* + * This value indicates the number of 16B BD locations (slots) + * consumed in the ring by this pre-sync command BD, including the + * BD header and the command field. + */ + #define TX_BD_PRESYNC_CMD_FLAGS_BD_CNT_MASK UINT32_C(0x1f00) + #define TX_BD_PRESYNC_CMD_FLAGS_BD_CNT_SFT 8 + /* + * This value defines the length of command field in bytes. The maximum + * value shall be 496. + */ + uint16_t len; + /* + * The opaque data field is pass through to TCE and can be used for + * debug. + */ + uint32_t opaque; + /* + * This field is the Crypto Context ID to which the retransmit packet is + * applied. The KID references the context fields used by the + * associated kTLS offloaded connection. + */ + uint32_t kid; + /* + * The KID value of all-ones is reserved for non-KTLS packets, which + * only implies that this value must not be used when filling this + * field for crypto packets. + */ + #define TX_BD_PRESYNC_CMD_KID_VAL_MASK UINT32_C(0xfffff) + #define TX_BD_PRESYNC_CMD_KID_VAL_SFT 0 + uint32_t unused_1; +} __rte_packed; + /* rx_prod_pkt_bd (size:128b/16B) */ struct rx_prod_pkt_bd { /* This value identifies the type of buffer descriptor. */ @@ -2310,6 +3205,297 @@ struct rx_prod_agg_bd { uint64_t address; } __rte_packed; +/* cfa_cmpls_cmp_data_msg (size:128b/16B) */ +struct cfa_cmpls_cmp_data_msg { + uint32_t mp_client_dma_length_opcode_status_type; + /* + * This field represents the Mid-Path client that generated the + * completion. + */ + #define CFA_CMPLS_CMP_DATA_MSG_TYPE_MASK UINT32_C(0x3f) + #define CFA_CMPLS_CMP_DATA_MSG_TYPE_SFT 0 + /* Mid Path Short Completion with length = 16B. */ + #define CFA_CMPLS_CMP_DATA_MSG_TYPE_MID_PATH_SHORT \ + UINT32_C(0x1e) + #define CFA_CMPLS_CMP_DATA_MSG_TYPE_LAST \ + CFA_CMPLS_CMP_DATA_MSG_TYPE_MID_PATH_SHORT + /* This value indicates the status for the command. */ + #define CFA_CMPLS_CMP_DATA_MSG_STATUS_MASK UINT32_C(0x3c0) + #define CFA_CMPLS_CMP_DATA_MSG_STATUS_SFT 6 + /* Completed without error. */ + #define CFA_CMPLS_CMP_DATA_MSG_STATUS_OK \ + (UINT32_C(0x0) << 6) + /* Indicates an unsupported CFA opcode in the command. */ + #define CFA_CMPLS_CMP_DATA_MSG_STATUS_UNSPRT_ERR \ + (UINT32_C(0x1) << 6) + /* + * Indicates a CFA command formatting error. This error can occur on + * any of the supported CFA commands. + */ + #define CFA_CMPLS_CMP_DATA_MSG_STATUS_FMT_ERR \ + (UINT32_C(0x2) << 6) + /* + * Indicates an SVIF-Table scope error. This error can occur on any + * of the supported CFA commands. + */ + #define CFA_CMPLS_CMP_DATA_MSG_STATUS_SCOPE_ERR \ + (UINT32_C(0x3) << 6) + /* + * Indicates that the table_index is either outside of the + * table_scope range set by its EM_SIZE or, for EM Insert, it is in + * the static bucket range. This error can occur on EM Insert + * commands. It can also occur on Read, Read Clear, Write, and + * Invalidate commands if the table_type is EM. + */ + #define CFA_CMPLS_CMP_DATA_MSG_STATUS_ADDR_ERR \ + (UINT32_C(0x4) << 6) + /* + * Cache operation responded with an error. This error can occur on + * Read, Read Clear, Write, EM Insert, and EM Delete commands. + */ + #define CFA_CMPLS_CMP_DATA_MSG_STATUS_CACHE_ERR \ + (UINT32_C(0x5) << 6) + /* + * Indicates failure on EM Insert or EM Delete Command. Hash index + * and hash msb are returned in table_index and hash_msb fields. + * Dma_length is set to 1 if the bucket is also returned (as dma + * data). + */ + #define CFA_CMPLS_CMP_DATA_MSG_STATUS_EM_FAIL \ + (UINT32_C(0x6) << 6) + /* + * Indicates no notifications were available on an Event Collection + * command. + */ + #define CFA_CMPLS_CMP_DATA_MSG_STATUS_EVENT_COLLECT_FAIL \ + (UINT32_C(0x7) << 6) + #define CFA_CMPLS_CMP_DATA_MSG_STATUS_LAST \ + CFA_CMPLS_CMP_DATA_MSG_STATUS_EVENT_COLLECT_FAIL + #define CFA_CMPLS_CMP_DATA_MSG_UNUSED0_MASK UINT32_C(0xc00) + #define CFA_CMPLS_CMP_DATA_MSG_UNUSED0_SFT 10 + /* This is the opcode from the command. */ + #define CFA_CMPLS_CMP_DATA_MSG_OPCODE_MASK \ + UINT32_C(0xff000) + #define CFA_CMPLS_CMP_DATA_MSG_OPCODE_SFT 12 + /* + * This is read command. From 32 to 128B can be read from a table + * using this command. + */ + #define CFA_CMPLS_CMP_DATA_MSG_OPCODE_READ \ + (UINT32_C(0x0) << 12) + /* + * This is write command. From 32 to 128B can be written to a table + * using this command. + */ + #define CFA_CMPLS_CMP_DATA_MSG_OPCODE_WRITE \ + (UINT32_C(0x1) << 12) + /* + * This is read-clear command. 32B can be read from a table and a 16b + * mask can be used to clear specific 16b units after the read as an + * atomic operation. + */ + #define CFA_CMPLS_CMP_DATA_MSG_OPCODE_READ_CLR \ + (UINT32_C(0x2) << 12) + /* + * An exact match table insert will be attempted into the table. If + * there is a free location in the bucket, the payload will be + * written to the bucket. + */ + #define CFA_CMPLS_CMP_DATA_MSG_OPCODE_EM_INSERT \ + (UINT32_C(0x3) << 12) + /* An exact match table delete will be attempted. */ + #define CFA_CMPLS_CMP_DATA_MSG_OPCODE_EM_DELETE \ + (UINT32_C(0x4) << 12) + /* + * The specified table area will be invalidated. If it is needed + * again, it will be read from the backing store. + */ + #define CFA_CMPLS_CMP_DATA_MSG_OPCODE_INVALIDATE \ + (UINT32_C(0x5) << 12) + /* Reads notification messages from the Host Notification Queue. */ + #define CFA_CMPLS_CMP_DATA_MSG_OPCODE_EVENT_COLLECT \ + (UINT32_C(0x6) << 12) + #define CFA_CMPLS_CMP_DATA_MSG_OPCODE_LAST \ + CFA_CMPLS_CMP_DATA_MSG_OPCODE_EVENT_COLLECT + /* + * This field indicates the length of the DMA that accompanies the + * completion. Specified in units of DWords (32b). Valid values are + * between 0 and 128. A value of zero indicates that there is no DMA + * that accompanies the completion. + */ + #define CFA_CMPLS_CMP_DATA_MSG_DMA_LENGTH_MASK \ + UINT32_C(0xff00000) + #define CFA_CMPLS_CMP_DATA_MSG_DMA_LENGTH_SFT 20 + /* + * This field represents the Mid-Path client that generated the + * completion. + */ + #define CFA_CMPLS_CMP_DATA_MSG_MP_CLIENT_MASK \ + UINT32_C(0xf0000000) + #define CFA_CMPLS_CMP_DATA_MSG_MP_CLIENT_SFT 28 + /* TX configrable flow processing block. */ + #define CFA_CMPLS_CMP_DATA_MSG_MP_CLIENT_TE_CFA \ + (UINT32_C(0x2) << 28) + /* RX configrable flow processing block. */ + #define CFA_CMPLS_CMP_DATA_MSG_MP_CLIENT_RE_CFA \ + (UINT32_C(0x3) << 28) + #define CFA_CMPLS_CMP_DATA_MSG_MP_CLIENT_LAST \ + CFA_CMPLS_CMP_DATA_MSG_MP_CLIENT_RE_CFA + /* + * This is a copy of the opaque field from the mid path BD of this + * command. + */ + uint32_t opaque; + uint16_t hash_msb_v; + /* + * This value is written by the NIC such that it will be different for + * each pass through the completion queue. The even passes will + * write 1. The odd passes will write 0. + */ + #define CFA_CMPLS_CMP_DATA_MSG_V UINT32_C(0x1) + #define CFA_CMPLS_CMP_DATA_MSG_UNUSED1_MASK UINT32_C(0xe) + #define CFA_CMPLS_CMP_DATA_MSG_UNUSED1_SFT 1 + /* + * This is the upper 12b of the hash, returned on Exact Match + * Insertion/Deletion Commands. + */ + #define CFA_CMPLS_CMP_DATA_MSG_HASH_MSB_MASK UINT32_C(0xfff0) + #define CFA_CMPLS_CMP_DATA_MSG_HASH_MSB_SFT 4 + /* This is the table type from the command. */ + uint8_t table_type; + #define CFA_CMPLS_CMP_DATA_MSG_UNUSED2_MASK UINT32_C(0xf) + #define CFA_CMPLS_CMP_DATA_MSG_UNUSED2_SFT 0 + #define CFA_CMPLS_CMP_DATA_MSG_TABLE_TYPE_MASK UINT32_C(0xf0) + #define CFA_CMPLS_CMP_DATA_MSG_TABLE_TYPE_SFT 4 + /* This command acts on the action table of the specified scope. */ + #define CFA_CMPLS_CMP_DATA_MSG_TABLE_TYPE_ACTION (UINT32_C(0x0) << 4) + /* This command acts on the exact match table of the specified scope. */ + #define CFA_CMPLS_CMP_DATA_MSG_TABLE_TYPE_EM (UINT32_C(0x1) << 4) + #define CFA_CMPLS_CMP_DATA_MSG_TABLE_TYPE_LAST \ + CFA_CMPLS_CMP_DATA_MSG_TABLE_TYPE_EM + uint8_t table_scope; + /* This is the table scope from the command. */ + #define CFA_CMPLS_CMP_DATA_MSG_TABLE_SCOPE_MASK UINT32_C(0x1f) + #define CFA_CMPLS_CMP_DATA_MSG_TABLE_SCOPE_SFT 0 + uint32_t table_index; + /* + * This is the table index from the command (if it exists). However, if + * an Exact Match Insertion/Deletion command failed, then this is the + * table index of the calculated static hash bucket. + */ + #define CFA_CMPLS_CMP_DATA_MSG_TABLE_INDEX_MASK UINT32_C(0x3ffffff) + #define CFA_CMPLS_CMP_DATA_MSG_TABLE_INDEX_SFT 0 +} __rte_packed; + +/* CFA Mid-Path 32B DMA Message */ +/* cfa_dma32b_data_msg (size:256b/32B) */ +struct cfa_dma32b_data_msg { + /* DMA data value. */ + uint32_t dta[8]; +} __rte_packed; + +/* CFA Mid-Path 64B DMA Message */ +/* cfa_dma64b_data_msg (size:512b/64B) */ +struct cfa_dma64b_data_msg { + /* DMA data value. */ + uint32_t dta[16]; +} __rte_packed; + +/* CFA Mid-Path 96B DMA Message */ +/* cfa_dma96b_data_msg (size:768b/96B) */ +struct cfa_dma96b_data_msg { + /* DMA data value. */ + uint32_t dta[24]; +} __rte_packed; + +/* CFA Mid-Path 128B DMA Message */ +/* cfa_dma128b_data_msg (size:1024b/128B) */ +struct cfa_dma128b_data_msg { + /* DMA data value. */ + uint32_t dta[32]; +} __rte_packed; + +/* ce_cmpls_cmp_data_msg (size:128b/16B) */ +struct ce_cmpls_cmp_data_msg { + uint16_t status_subtype_type; + /* + * This field indicates the exact type of the completion. By + * convention, the LSB identifies the length of the record in 16B + * units. Even values indicate 16B records. Odd values indicate 32B + * records. + */ + #define CE_CMPLS_CMP_DATA_MSG_TYPE_MASK UINT32_C(0x3f) + #define CE_CMPLS_CMP_DATA_MSG_TYPE_SFT 0 + /* Completion of a Mid Path Command. Length = 16B */ + #define CE_CMPLS_CMP_DATA_MSG_TYPE_MID_PATH_SHORT UINT32_C(0x1e) + #define CE_CMPLS_CMP_DATA_MSG_TYPE_LAST \ + CE_CMPLS_CMP_DATA_MSG_TYPE_MID_PATH_SHORT + /* + * This value indicates the CE sub-type operation that is being + * completed. + */ + #define CE_CMPLS_CMP_DATA_MSG_SUBTYPE_MASK UINT32_C(0x3c0) + #define CE_CMPLS_CMP_DATA_MSG_SUBTYPE_SFT 6 + /* Completion Response for a Solicited Command. */ + #define CE_CMPLS_CMP_DATA_MSG_SUBTYPE_SOLICITED (UINT32_C(0x0) << 6) + /* Error Completion (Unsolicited). */ + #define CE_CMPLS_CMP_DATA_MSG_SUBTYPE_ERR (UINT32_C(0x1) << 6) + /* Re-Sync Completion (Unsolicited) */ + #define CE_CMPLS_CMP_DATA_MSG_SUBTYPE_RESYNC (UINT32_C(0x2) << 6) + #define CE_CMPLS_CMP_DATA_MSG_SUBTYPE_LAST \ + CE_CMPLS_CMP_DATA_MSG_SUBTYPE_RESYNC + /* This value indicates the status for the command. */ + #define CE_CMPLS_CMP_DATA_MSG_STATUS_MASK UINT32_C(0x3c00) + #define CE_CMPLS_CMP_DATA_MSG_STATUS_SFT 10 + /* Completed without error. */ + #define CE_CMPLS_CMP_DATA_MSG_STATUS_OK \ + (UINT32_C(0x0) << 10) + /* CFCK load error. */ + #define CE_CMPLS_CMP_DATA_MSG_STATUS_CTX_LD_ERR \ + (UINT32_C(0x1) << 10) + /* FID check error. */ + #define CE_CMPLS_CMP_DATA_MSG_STATUS_FID_CHK_ERR \ + (UINT32_C(0x2) << 10) + #define CE_CMPLS_CMP_DATA_MSG_STATUS_LAST \ + CE_CMPLS_CMP_DATA_MSG_STATUS_FID_CHK_ERR + uint8_t unused0; + uint8_t mp_clients; + #define CE_CMPLS_CMP_DATA_MSG_UNUSED1_MASK UINT32_C(0xf) + #define CE_CMPLS_CMP_DATA_MSG_UNUSED1_SFT 0 + /* + * This field represents the Mid-Path client that generated the + * completion. + */ + #define CE_CMPLS_CMP_DATA_MSG_MP_CLIENTS_MASK UINT32_C(0xf0) + #define CE_CMPLS_CMP_DATA_MSG_MP_CLIENTS_SFT 4 + /* TX crypto engine block. */ + #define CE_CMPLS_CMP_DATA_MSG_MP_CLIENTS_TCE (UINT32_C(0x0) << 4) + /* RX crypto engine block. */ + #define CE_CMPLS_CMP_DATA_MSG_MP_CLIENTS_RCE (UINT32_C(0x1) << 4) + #define CE_CMPLS_CMP_DATA_MSG_MP_CLIENTS_LAST \ + CE_CMPLS_CMP_DATA_MSG_MP_CLIENTS_RCE + /* + * This is a copy of the opaque field from the mid path BD of this + * command. + */ + uint32_t opaque; + /* */ + uint32_t kid_v; + /* + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes will + * write 1. The odd passes will write 0. + */ + #define CE_CMPLS_CMP_DATA_MSG_V UINT32_C(0x1) + /* + * This field is the Crypto Context ID. The KID is used to store + * information used by the associated kTLS offloaded connection. + */ + #define CE_CMPLS_CMP_DATA_MSG_KID_MASK UINT32_C(0x1ffffe) + #define CE_CMPLS_CMP_DATA_MSG_KID_SFT 1 + uint32_t unused2; +} __rte_packed; + /* cmpl_base (size:128b/16B) */ struct cmpl_base { uint16_t type; @@ -5423,27 +6609,32 @@ struct rx_tpa_v2_end_cmpl { * records. Odd values indicate 32B * records. */ - #define RX_TPA_V2_END_CMPL_TYPE_MASK UINT32_C(0x3f) - #define RX_TPA_V2_END_CMPL_TYPE_SFT 0 + #define RX_TPA_V2_END_CMPL_TYPE_MASK \ + UINT32_C(0x3f) + #define RX_TPA_V2_END_CMPL_TYPE_SFT 0 /* * RX L2 TPA End Completion: * Completion at the end of a TPA operation. * Length = 32B */ - #define RX_TPA_V2_END_CMPL_TYPE_RX_TPA_END UINT32_C(0x15) + #define RX_TPA_V2_END_CMPL_TYPE_RX_TPA_END \ + UINT32_C(0x15) #define RX_TPA_V2_END_CMPL_TYPE_LAST \ RX_TPA_V2_END_CMPL_TYPE_RX_TPA_END - #define RX_TPA_V2_END_CMPL_FLAGS_MASK UINT32_C(0xffc0) - #define RX_TPA_V2_END_CMPL_FLAGS_SFT 6 + #define RX_TPA_V2_END_CMPL_FLAGS_MASK \ + UINT32_C(0xffc0) + #define RX_TPA_V2_END_CMPL_FLAGS_SFT 6 /* * When this bit is '1', it indicates a packet that has an * error of some type. Type of error is indicated in * error_flags. */ - #define RX_TPA_V2_END_CMPL_FLAGS_ERROR UINT32_C(0x40) + #define RX_TPA_V2_END_CMPL_FLAGS_ERROR \ + UINT32_C(0x40) /* This field indicates how the packet was placed in the buffer. */ - #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380) - #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_SFT 7 + #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_MASK \ + UINT32_C(0x380) + #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_SFT 7 /* * Jumbo: * TPA Packet was placed using jumbo algorithm. This means @@ -5482,11 +6673,30 @@ struct rx_tpa_v2_end_cmpl { */ #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_GRO_HDS \ (UINT32_C(0x6) << 7) + /* + * IOC/Header-Data Separation: + * Packet will be placed using In-Order Completion/HDS where + * the header is in the first packet buffer. Payload of each + * packet will be placed such that each packet starts at the + * beginning of an aggregation buffer. + */ + #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_IOC_HDS \ + (UINT32_C(0x7) << 7) #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_LAST \ - RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_GRO_HDS - /* unused is 2 b */ - #define RX_TPA_V2_END_CMPL_FLAGS_UNUSED_MASK UINT32_C(0xc00) - #define RX_TPA_V2_END_CMPL_FLAGS_UNUSED_SFT 10 + RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_IOC_HDS + /* unused is 1 b */ + #define RX_TPA_V2_END_CMPL_FLAGS_UNUSED \ + UINT32_C(0x400) + /* + * This bit is '1' if metadata has been added to the end of the + * packet in host memory. Metadata starts at the first 32B boundary + * after the end of the packet for regular and jumbo placement. + * It starts at the first 32B boundary after the end of the header + * for HDS placement. The length of the metadata is indicated in the + * metadata itself. + */ + #define RX_TPA_V2_END_CMPL_FLAGS_PKT_METADATA_PRESENT \ + UINT32_C(0x800) /* * This value indicates what the inner packet determined for the * packet was. @@ -5496,8 +6706,9 @@ struct rx_tpa_v2_end_cmpl { * field is valid and contains the TCP checksum. * This also indicates that the payload_offset field is valid. */ - #define RX_TPA_V2_END_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000) - #define RX_TPA_V2_END_CMPL_FLAGS_ITYPE_SFT 12 + #define RX_TPA_V2_END_CMPL_FLAGS_ITYPE_MASK \ + UINT32_C(0xf000) + #define RX_TPA_V2_END_CMPL_FLAGS_ITYPE_SFT 12 /* * This value is zero for TPA End completions. * There is no data in the buffer that corresponds to the opaque @@ -6047,6 +7258,12 @@ struct hwrm_async_event_cmpl { /* Master function selection event */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_ERROR_RECOVERY \ UINT32_C(0x9) + /* + * An event signifying that a ring has been disabled by + * hw due to error. + */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_RING_MONITOR_MSG \ + UINT32_C(0xa) /* Function driver unloaded */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_DRVR_UNLOAD \ UINT32_C(0x10) @@ -6156,6 +7373,9 @@ struct hwrm_async_event_cmpl { */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PFC_WATCHDOG_CFG_CHANGE \ UINT32_C(0x41) + /* Maximum Registrable event id. */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_MAX_RGTR_EVENT_ID \ + UINT32_C(0x42) /* * A trace log message. This contains firmware trace logs string * embedded in the asynchronous message. This is an experimental @@ -6792,7 +8012,7 @@ struct hwrm_async_event_cmpl_reset_notify { UINT32_C(0x8) #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_ID_LAST \ HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_ID_RESET_NOTIFY - /* Event specific data */ + /* Event specific data. The data is for internal debug use only. */ uint32_t event_data2; uint8_t opaque_v; /* @@ -6936,6 +8156,71 @@ struct hwrm_async_event_cmpl_error_recovery { UINT32_C(0x2) } __rte_packed; +/* hwrm_async_event_cmpl_ring_monitor_msg (size:128b/16B) */ +struct hwrm_async_event_cmpl_ring_monitor_msg { + uint16_t type; + /* + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. + */ + #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_TYPE_SFT 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* Ring Monitor Message. */ + #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_EVENT_ID_RING_MONITOR_MSG \ + UINT32_C(0xa) + #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_EVENT_ID_RING_MONITOR_MSG + /* Event specific data */ + uint32_t event_data2; + /* Type of Ring disabled. */ + #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_EVENT_DATA2_DISABLE_RING_TYPE_MASK \ + UINT32_C(0xff) + #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_EVENT_DATA2_DISABLE_RING_TYPE_SFT \ + 0 + /* tx ring disabled. */ + #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_EVENT_DATA2_DISABLE_RING_TYPE_TX \ + UINT32_C(0x0) + /* rx ring disabled. */ + #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_EVENT_DATA2_DISABLE_RING_TYPE_RX \ + UINT32_C(0x1) + /* cmpl ring disabled. */ + #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_EVENT_DATA2_DISABLE_RING_TYPE_CMPL \ + UINT32_C(0x2) + #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_EVENT_DATA2_DISABLE_RING_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_EVENT_DATA2_DISABLE_RING_TYPE_CMPL + uint8_t opaque_v; + /* + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. + */ + #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_V UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_OPAQUE_MASK \ + UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* + * Event specific data. If ring_type_disabled indicates a tx,rx or cmpl + * then this field will indicate the ring id. + */ + uint32_t event_data1; +} __rte_packed; + /* hwrm_async_event_cmpl_func_drvr_unload (size:128b/16B) */ struct hwrm_async_event_cmpl_func_drvr_unload { uint16_t type; @@ -8396,6 +9681,388 @@ struct hwrm_async_event_cmpl_hwrm_error { UINT32_C(0x1) } __rte_packed; +/* metadata_base_msg (size:64b/8B) */ +struct metadata_base_msg { + uint16_t md_type_link; + /* This field classifies the data present in the meta-data. */ + #define METADATA_BASE_MSG_MD_TYPE_MASK UINT32_C(0x1f) + #define METADATA_BASE_MSG_MD_TYPE_SFT 0 + /* Meta data fields are not valid */ + #define METADATA_BASE_MSG_MD_TYPE_NONE UINT32_C(0x0) + /* + * This setting is used when packets are coming in-order. Depending on + * the state of the receive context, the meta-data will carry different + * information. + */ + #define METADATA_BASE_MSG_MD_TYPE_TLS_INSYNC UINT32_C(0x1) + /* + * With this setting HW passes the TCP sequence number of the TLS + * record that it is requesting a resync on in the meta data. + */ + #define METADATA_BASE_MSG_MD_TYPE_TLS_RESYNC UINT32_C(0x2) + #define METADATA_BASE_MSG_MD_TYPE_LAST \ + METADATA_BASE_MSG_MD_TYPE_TLS_RESYNC + /* + * This field indicates where the next metadata block starts. It is + * counted in 16B units. A value of zero indicates that there is no + * metadata. + */ + #define METADATA_BASE_MSG_LINK_MASK UINT32_C(0x1e0) + #define METADATA_BASE_MSG_LINK_SFT 5 + uint16_t unused0; + uint32_t unused1; +} __rte_packed; + +/* tls_metadata_base_msg (size:64b/8B) */ +struct tls_metadata_base_msg { + uint32_t md_type_link_flags_kid_lo; + /* This field classifies the data present in the meta-data. */ + #define TLS_METADATA_BASE_MSG_MD_TYPE_MASK \ + UINT32_C(0x1f) + #define TLS_METADATA_BASE_MSG_MD_TYPE_SFT 0 + /* + * This setting is used when packets are coming in-order. Depending on + * the state of the receive context, the meta-data will carry different + * information. + */ + #define TLS_METADATA_BASE_MSG_MD_TYPE_TLS_INSYNC \ + UINT32_C(0x1) + /* + * With this setting HW passes the TCP sequence number of the TLS + * record that it is requesting a resync on in the meta data. + */ + #define TLS_METADATA_BASE_MSG_MD_TYPE_TLS_RESYNC \ + UINT32_C(0x2) + #define TLS_METADATA_BASE_MSG_MD_TYPE_LAST \ + TLS_METADATA_BASE_MSG_MD_TYPE_TLS_RESYNC + /* + * This field indicates where the next metadata block starts. It is + * counted in 16B units. A value of zero indicates that there is no + * metadata. + */ + #define TLS_METADATA_BASE_MSG_LINK_MASK \ + UINT32_C(0x1e0) + #define TLS_METADATA_BASE_MSG_LINK_SFT 5 + /* These are flags present in the metadata. */ + #define TLS_METADATA_BASE_MSG_FLAGS_MASK \ + UINT32_C(0x1fffe00) + #define TLS_METADATA_BASE_MSG_FLAGS_SFT 9 + /* + * A value of 1 implies that the packet was decrypted by HW. Otherwise + * the packet is passed on as it came in on the wire. + */ + #define TLS_METADATA_BASE_MSG_FLAGS_DECRYPTED \ + UINT32_C(0x200) + /* + * This field indicates the state of the ghash field passed in the + * meta-data. + */ + #define TLS_METADATA_BASE_MSG_FLAGS_GHASH_MASK \ + UINT32_C(0xc00) + #define TLS_METADATA_BASE_MSG_FLAGS_GHASH_SFT 10 + /* + * This enumeration states that the ghash is not valid in the + * meta-data. + */ + #define TLS_METADATA_BASE_MSG_FLAGS_GHASH_NOT_VALID \ + (UINT32_C(0x0) << 10) + /* + * This enumeration indicates that this pkt contains the record's + * tag and this pkt was received ooo, the partial_ghash field + * contains the ghash. + */ + #define TLS_METADATA_BASE_MSG_FLAGS_GHASH_CUR_REC \ + (UINT32_C(0x1) << 10) + /* + * This enumeration indicates that the current record's tag wasn't + * seen and the chip is moving on to the next record, the + * partial_ghash field contains the ghash. + */ + #define TLS_METADATA_BASE_MSG_FLAGS_GHASH_PRIOR_REC \ + (UINT32_C(0x2) << 10) + #define TLS_METADATA_BASE_MSG_FLAGS_GHASH_LAST \ + TLS_METADATA_BASE_MSG_FLAGS_GHASH_PRIOR_REC + /* This field indicates the status of tag authentication. */ + #define TLS_METADATA_BASE_MSG_FLAGS_TAG_AUTH_STATUS_MASK \ + UINT32_C(0x3000) + #define TLS_METADATA_BASE_MSG_FLAGS_TAG_AUTH_STATUS_SFT 12 + /* + * This enumeration is set when there is no tags present in the + * packet. + */ + #define TLS_METADATA_BASE_MSG_FLAGS_TAG_AUTH_STATUS_NONE \ + (UINT32_C(0x0) << 12) + /* + * This enumeration states that there is at least one tag in the + * packet and every tag is valid. + */ + #define TLS_METADATA_BASE_MSG_FLAGS_TAG_AUTH_STATUS_SUCCESS \ + (UINT32_C(0x1) << 12) + /* + * This enumeration states that there is at least one tag in the + * packet and at least one of the tag is invalid. The entire packet + * is sent decrypted to the host. + */ + #define TLS_METADATA_BASE_MSG_FLAGS_TAG_AUTH_STATUS_FAILURE \ + (UINT32_C(0x2) << 12) + #define TLS_METADATA_BASE_MSG_FLAGS_TAG_AUTH_STATUS_LAST \ + TLS_METADATA_BASE_MSG_FLAGS_TAG_AUTH_STATUS_FAILURE + /* + * A value of 1 indicates that this packet contains a record that + * starts in the packet and extends beyond the packet. + */ + #define TLS_METADATA_BASE_MSG_FLAGS_HEADER_FLDS_VALID \ + UINT32_C(0x4000) + /* + * This value indicates the lower 7-bit of the Crypto Key ID + * associated with this operation. + */ + #define TLS_METADATA_BASE_MSG_KID_LO_MASK \ + UINT32_C(0xfe000000) + #define TLS_METADATA_BASE_MSG_KID_LO_SFT 25 + uint16_t kid_hi; + /* + * This value indicates the upper 13-bit of the Crypto Key ID + * associated with this operation. + */ + #define TLS_METADATA_BASE_MSG_KID_HI_MASK UINT32_C(0x1fff) + #define TLS_METADATA_BASE_MSG_KID_HI_SFT 0 + uint16_t unused0; +} __rte_packed; + +/* tls_metadata_insync_msg (size:192b/24B) */ +struct tls_metadata_insync_msg { + uint32_t md_type_link_flags_kid_lo; + /* This field classifies the data present in the meta-data. */ + #define TLS_METADATA_INSYNC_MSG_MD_TYPE_MASK \ + UINT32_C(0x1f) + #define TLS_METADATA_INSYNC_MSG_MD_TYPE_SFT 0 + /* + * This setting is used when packets are coming in-order. Depending on + * the state of the receive context, the meta-data will carry different + * information. + */ + #define TLS_METADATA_INSYNC_MSG_MD_TYPE_TLS_INSYNC \ + UINT32_C(0x1) + #define TLS_METADATA_INSYNC_MSG_MD_TYPE_LAST \ + TLS_METADATA_INSYNC_MSG_MD_TYPE_TLS_INSYNC + /* + * This field indicates where the next metadata block starts. It is + * counted in 16B units. A value of zero indicates that there is no + * metadata. + */ + #define TLS_METADATA_INSYNC_MSG_LINK_MASK \ + UINT32_C(0x1e0) + #define TLS_METADATA_INSYNC_MSG_LINK_SFT 5 + /* These are flags present in the metadata. */ + #define TLS_METADATA_INSYNC_MSG_FLAGS_MASK \ + UINT32_C(0x1fffe00) + #define TLS_METADATA_INSYNC_MSG_FLAGS_SFT 9 + /* + * A value of 1 implies that the packet was decrypted by HW. Otherwise + * the packet is passed on as it came in on the wire. + */ + #define TLS_METADATA_INSYNC_MSG_FLAGS_DECRYPTED \ + UINT32_C(0x200) + /* + * This field indicates the state of the ghash field passed in the + * meta-data. + */ + #define TLS_METADATA_INSYNC_MSG_FLAGS_GHASH_MASK \ + UINT32_C(0xc00) + #define TLS_METADATA_INSYNC_MSG_FLAGS_GHASH_SFT 10 + /* + * This enumeration states that the ghash is not valid in the + * meta-data. + */ + #define TLS_METADATA_INSYNC_MSG_FLAGS_GHASH_NOT_VALID \ + (UINT32_C(0x0) << 10) + /* + * This enumeration indicates that this pkt contains the record's + * tag and this pkt was received ooo, the partial_ghash field + * contains the ghash. + */ + #define TLS_METADATA_INSYNC_MSG_FLAGS_GHASH_CUR_REC \ + (UINT32_C(0x1) << 10) + /* + * This enumeration indicates that the current record's tag wasn't + * seen and the chip is moving on to the next record, the + * partial_ghash field contains the ghash. + */ + #define TLS_METADATA_INSYNC_MSG_FLAGS_GHASH_PRIOR_REC \ + (UINT32_C(0x2) << 10) + #define TLS_METADATA_INSYNC_MSG_FLAGS_GHASH_LAST \ + TLS_METADATA_INSYNC_MSG_FLAGS_GHASH_PRIOR_REC + /* This field indicates the status of tag authentication. */ + #define TLS_METADATA_INSYNC_MSG_FLAGS_TAG_AUTH_STATUS_MASK \ + UINT32_C(0x3000) + #define TLS_METADATA_INSYNC_MSG_FLAGS_TAG_AUTH_STATUS_SFT 12 + /* + * This enumeration is set when there is no tags present in the + * packet. + */ + #define TLS_METADATA_INSYNC_MSG_FLAGS_TAG_AUTH_STATUS_NONE \ + (UINT32_C(0x0) << 12) + /* + * This enumeration states that there is at least one tag in the + * packet and every tag is valid. + */ + #define TLS_METADATA_INSYNC_MSG_FLAGS_TAG_AUTH_STATUS_SUCCESS \ + (UINT32_C(0x1) << 12) + /* + * This enumeration states that there is at least one tag in the + * packet and at least one of the tag is invalid. The entire packet + * is sent decrypted to the host. + */ + #define TLS_METADATA_INSYNC_MSG_FLAGS_TAG_AUTH_STATUS_FAILURE \ + (UINT32_C(0x2) << 12) + #define TLS_METADATA_INSYNC_MSG_FLAGS_TAG_AUTH_STATUS_LAST \ + TLS_METADATA_INSYNC_MSG_FLAGS_TAG_AUTH_STATUS_FAILURE + /* + * A value of 1 indicates that this packet contains a record that + * starts in the packet and extends beyond the packet. + */ + #define TLS_METADATA_INSYNC_MSG_FLAGS_HEADER_FLDS_VALID \ + UINT32_C(0x4000) + /* + * This value indicates the lower 7-bit of the Crypto Key ID + * associated with this operation. + */ + #define TLS_METADATA_INSYNC_MSG_KID_LO_MASK \ + UINT32_C(0xfe000000) + #define TLS_METADATA_INSYNC_MSG_KID_LO_SFT 25 + uint16_t kid_hi; + /* + * This value indicates the upper 13-bit of the Crypto Key ID + * associated with this operation. + */ + #define TLS_METADATA_INSYNC_MSG_KID_HI_MASK UINT32_C(0x1fff) + #define TLS_METADATA_INSYNC_MSG_KID_HI_SFT 0 + /* + * This field is only valid when md_type is set to tls_insync. This field + * indicates the offset within the current TCP packet where the TLS header + * starts. If there are multiple TLS headers in the packet, this provides + * the offset of the last TLS header. + * + * The field is calculated by subtracting TCP sequence number of the first + * byte of the TCP payload of the packet from the TCP sequence number of + * the last TLS header in the packet. + */ + uint16_t tls_header_offset; + /* + * This is the sequence Number of the record that was processed by the HW. + * If there are multiple records in a packet, this would be the sequence + * number of the last record. + */ + uint64_t record_seq_num; + /* + * This field contains cumulative partial GHASH value of all the packets + * decrypted by the HW associated with a TLS record. This field is valid + * on when packets belonging to have arrived out-of-order and HW could + * not decrypt every packet and authenticate the record. Partial GHASH is + * only sent out with packet having the TAG field. + */ + uint64_t partial_ghash; +} __rte_packed; + +/* tls_metadata_resync_msg (size:256b/32B) */ +struct tls_metadata_resync_msg { + uint32_t md_type_link_flags_kid_lo; + /* This field classifies the data present in the meta-data. */ + #define TLS_METADATA_RESYNC_MSG_MD_TYPE_MASK \ + UINT32_C(0x1f) + #define TLS_METADATA_RESYNC_MSG_MD_TYPE_SFT 0 + /* + * With this setting HW passes the TCP sequence number of the TLS + * record that it is requesting a resync on in the meta data. + */ + #define TLS_METADATA_RESYNC_MSG_MD_TYPE_TLS_RESYNC \ + UINT32_C(0x2) + #define TLS_METADATA_RESYNC_MSG_MD_TYPE_LAST \ + TLS_METADATA_RESYNC_MSG_MD_TYPE_TLS_RESYNC + /* + * This field indicates where the next metadata block starts. It is + * counted in 16B units. A value of zero indicates that there is no + * metadata. + */ + #define TLS_METADATA_RESYNC_MSG_LINK_MASK \ + UINT32_C(0x1e0) + #define TLS_METADATA_RESYNC_MSG_LINK_SFT 5 + /* These are flags present in the metadata. */ + #define TLS_METADATA_RESYNC_MSG_FLAGS_MASK \ + UINT32_C(0x1fffe00) + #define TLS_METADATA_RESYNC_MSG_FLAGS_SFT 9 + /* + * A value of 1 implies that the packet was decrypted by HW. Otherwise + * the packet is passed on as it came in on the wire. + */ + #define TLS_METADATA_RESYNC_MSG_FLAGS_DECRYPTED \ + UINT32_C(0x200) + /* + * This field indicates the state of the ghash field passed in the + * meta-data. + */ + #define TLS_METADATA_RESYNC_MSG_FLAGS_GHASH_MASK \ + UINT32_C(0xc00) + #define TLS_METADATA_RESYNC_MSG_FLAGS_GHASH_SFT 10 + /* + * This enumeration states that the ghash is not valid in the + * meta-data. + */ + #define TLS_METADATA_RESYNC_MSG_FLAGS_GHASH_NOT_VALID \ + (UINT32_C(0x0) << 10) + #define TLS_METADATA_RESYNC_MSG_FLAGS_GHASH_LAST \ + TLS_METADATA_RESYNC_MSG_FLAGS_GHASH_NOT_VALID + /* This field indicates the status of tag authentication. */ + #define TLS_METADATA_RESYNC_MSG_FLAGS_TAG_AUTH_STATUS_MASK \ + UINT32_C(0x3000) + #define TLS_METADATA_RESYNC_MSG_FLAGS_TAG_AUTH_STATUS_SFT 12 + /* + * This enumeration is set when there is no tags present in the + * packet. + */ + #define TLS_METADATA_RESYNC_MSG_FLAGS_TAG_AUTH_STATUS_NONE \ + (UINT32_C(0x0) << 12) + #define TLS_METADATA_RESYNC_MSG_FLAGS_TAG_AUTH_STATUS_LAST \ + TLS_METADATA_RESYNC_MSG_FLAGS_TAG_AUTH_STATUS_NONE + /* + * A value of 1 indicates that this packet contains a record that + * starts in the packet and extends beyond the packet. + */ + #define TLS_METADATA_RESYNC_MSG_FLAGS_HEADER_FLDS_VALID \ + UINT32_C(0x4000) + /* + * This value indicates the lower 7-bit of the Crypto Key ID + * associated with this operation. + */ + #define TLS_METADATA_RESYNC_MSG_KID_LO_MASK \ + UINT32_C(0xfe000000) + #define TLS_METADATA_RESYNC_MSG_KID_LO_SFT 25 + uint16_t kid_hi; + /* + * This value indicates the upper 13-bit of the Crypto Key ID + * associated with this operation. + */ + #define TLS_METADATA_RESYNC_MSG_KID_HI_MASK UINT32_C(0x1fff) + #define TLS_METADATA_RESYNC_MSG_KID_HI_SFT 0 + /* This field is unused in this context. */ + uint16_t metadata_0; + /* + * This field indicates the TCP sequence number of the TLS record that HW + * is requesting a resync on from the Driver. HW will keep a count of the + * TLS records it found after this record (delta_records). Driver will + * provide the TLS Record Sequence Number associated with the record. HW + * will add the delta_records to the Record Sequence Number provided by + * the driver and get back on sync. + */ + uint32_t resync_record_tcp_seq_num; + uint32_t unused0; + /* This field is unused in this context. */ + uint64_t metadata_2; + /* This field is unused in this context. */ + uint64_t metadata_3; +} __rte_packed; + /******************* * hwrm_func_reset * *******************/ @@ -9466,7 +11133,38 @@ struct hwrm_func_qcaps_output { UINT32_C(0x80) /* The maximum number of SCHQs supported by this device. */ uint8_t max_schqs; - uint8_t unused_1[2]; + uint8_t mpc_chnls_cap; + /* + * When this bit is '1', it indicates that HW and firmware + * supports the use of a MPC channel with destination set + * to the TX crypto engine block. + */ + #define HWRM_FUNC_QCAPS_OUTPUT_MPC_CHNLS_CAP_TCE UINT32_C(0x1) + /* + * When this bit is '1', it indicates that HW and firmware + * supports the use of a MPC channel with destination set + * to the RX crypto engine block. + */ + #define HWRM_FUNC_QCAPS_OUTPUT_MPC_CHNLS_CAP_RCE UINT32_C(0x2) + /* + * When this bit is '1', it indicates that HW and firmware + * supports the use of a MPC channel with destination set + * to the TX configurable flow processing block. + */ + #define HWRM_FUNC_QCAPS_OUTPUT_MPC_CHNLS_CAP_TE_CFA UINT32_C(0x4) + /* + * When this bit is '1', it indicates that HW and firmware + * supports the use of a MPC channel with destination set + * to the RX configurable flow processing block. + */ + #define HWRM_FUNC_QCAPS_OUTPUT_MPC_CHNLS_CAP_RE_CFA UINT32_C(0x8) + /* + * When this bit is '1', it indicates that HW and firmware + * supports the use of a MPC channel with destination set + * to the primate processor block. + */ + #define HWRM_FUNC_QCAPS_OUTPUT_MPC_CHNLS_CAP_PRIMATE UINT32_C(0x10) + uint8_t unused_1; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -9643,6 +11341,12 @@ struct hwrm_func_qcfg_output { */ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_PPP_PUSH_MODE_ENABLED \ UINT32_C(0x400) + /* + * If set to 1, then the firmware will notify driver using async + * event when a ring is disabled due to a Hardware error. + */ + #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_RING_MONITOR_ENABLED \ + UINT32_C(0x800) /* * This value is current MAC address configured for this * function. A value of 00-00-00-00-00-00 indicates no @@ -9959,7 +11663,40 @@ struct hwrm_func_qcfg_output { #define HWRM_FUNC_QCFG_OUTPUT_SVIF_INFO_SVIF_SFT 0 /* This field specifies whether svif is valid or not */ #define HWRM_FUNC_QCFG_OUTPUT_SVIF_INFO_SVIF_VALID UINT32_C(0x8000) - uint8_t unused_2[7]; + uint8_t mpc_chnls; + /* + * When this bit is '1', it indicates that a MPC channel with + * destination set to the TX crypto engine block is enabled. + */ + #define HWRM_FUNC_QCFG_OUTPUT_MPC_CHNLS_TCE_ENABLED \ + UINT32_C(0x1) + /* + * When this bit is '1', it indicates that a MPC channel with + * destination set to the RX crypto engine block is enabled. + */ + #define HWRM_FUNC_QCFG_OUTPUT_MPC_CHNLS_RCE_ENABLED \ + UINT32_C(0x2) + /* + * When this bit is '1', it indicates that a MPC channel with + * destination set to the TX configurable flow processing block is + * enabled. + */ + #define HWRM_FUNC_QCFG_OUTPUT_MPC_CHNLS_TE_CFA_ENABLED \ + UINT32_C(0x4) + /* + * When this bit is '1', it indicates that a MPC channel with + * destination set to the RX configurable flow processing block is + * enabled. + */ + #define HWRM_FUNC_QCFG_OUTPUT_MPC_CHNLS_RE_CFA_ENABLED \ + UINT32_C(0x8) + /* + * When this bit is '1', it indicates that a MPC channel with + * destination set to the primate processor block is enabled. + */ + #define HWRM_FUNC_QCFG_OUTPUT_MPC_CHNLS_PRIMATE_ENABLED \ + UINT32_C(0x10) + uint8_t unused_2[6]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -10008,7 +11745,7 @@ struct hwrm_func_cfg_input { /* * Function ID of the function that is being * configured. - * If set to 0xFF... (All Fs), then the the configuration is + * If set to 0xFF... (All Fs), then the configuration is * for the requesting function. */ uint16_t fid; @@ -10376,6 +12113,12 @@ struct hwrm_func_cfg_input { */ #define HWRM_FUNC_CFG_INPUT_ENABLES_SCHQ_ID \ UINT32_C(0x1000000) + /* + * This bit must be '1' for the mpc_chnls field to be + * configured. + */ + #define HWRM_FUNC_CFG_INPUT_ENABLES_MPC_CHNLS \ + UINT32_C(0x2000000) /* * The maximum transmission unit of the function. * The HWRM should make sure that the mtu of @@ -10642,7 +12385,74 @@ struct hwrm_func_cfg_input { uint16_t num_mcast_filters; /* Used by a PF driver to associate a SCHQ with a VF. */ uint16_t schq_id; - uint8_t unused_0[6]; + uint16_t mpc_chnls; + /* + * When this bit is '1', the caller requests to enable a MPC + * channel with destination to the TX crypto engine block. + * When this bit is ‘0’, this flag has no effect. + */ + #define HWRM_FUNC_CFG_INPUT_MPC_CHNLS_TCE_ENABLE UINT32_C(0x1) + /* + * When this bit is '1', the caller requests to disable a MPC + * channel with destination to the TX crypto engine block. + * When this bit is ‘0’, this flag has no effect. + */ + #define HWRM_FUNC_CFG_INPUT_MPC_CHNLS_TCE_DISABLE UINT32_C(0x2) + /* + * When this bit is '1', the caller requests to enable a MPC + * channel with destination to the RX crypto engine block. + * When this bit is ‘0’, this flag has no effect. + */ + #define HWRM_FUNC_CFG_INPUT_MPC_CHNLS_RCE_ENABLE UINT32_C(0x4) + /* + * When this bit is '1', the caller requests to disable a MPC + * channel with destination to the RX crypto engine block. + * When this bit is ‘0’, this flag has no effect. + */ + #define HWRM_FUNC_CFG_INPUT_MPC_CHNLS_RCE_DISABLE UINT32_C(0x8) + /* + * When this bit is '1', the caller requests to enable a MPC + * channel with destination to the TX configurable flow processing + * block. When this bit is ‘0’, this flag has no effect. + */ + #define HWRM_FUNC_CFG_INPUT_MPC_CHNLS_TE_CFA_ENABLE \ + UINT32_C(0x10) + /* + * When this bit is '1', the caller requests to disable a MPC + * channel with destination to the TX configurable flow processing + * block. When this bit is ‘0’, this flag has no effect. + */ + #define HWRM_FUNC_CFG_INPUT_MPC_CHNLS_TE_CFA_DISABLE \ + UINT32_C(0x20) + /* + * When this bit is '1', the caller requests to enable a MPC + * channel with destination to the RX configurable flow processing + * block. When this bit is ‘0’, this flag has no effect. + */ + #define HWRM_FUNC_CFG_INPUT_MPC_CHNLS_RE_CFA_ENABLE \ + UINT32_C(0x40) + /* + * When this bit is '1', the caller requests to disable a MPC + * channel with destination to the RX configurable flow processing + * block. When this bit is ‘0’, this flag has no effect. + */ + #define HWRM_FUNC_CFG_INPUT_MPC_CHNLS_RE_CFA_DISABLE \ + UINT32_C(0x80) + /* + * When this bit is '1', the caller requests to enable a MPC + * channel with destination to the primate processor block. + * When this bit is ‘0’, this flag has no effect. + */ + #define HWRM_FUNC_CFG_INPUT_MPC_CHNLS_PRIMATE_ENABLE \ + UINT32_C(0x100) + /* + * When this bit is '1', the caller requests to disable a MPC + * channel with destination to the primate processor block. + * When this bit is ‘0’, this flag has no effect. + */ + #define HWRM_FUNC_CFG_INPUT_MPC_CHNLS_PRIMATE_DISABLE \ + UINT32_C(0x200) + uint8_t unused_0[4]; } __rte_packed; /* hwrm_func_cfg_output (size:128b/16B) */ @@ -10889,7 +12699,7 @@ struct hwrm_func_qstats_ext_input { uint8_t unused_1[4]; } __rte_packed; -/* hwrm_func_qstats_ext_output (size:1472b/184B) */ +/* hwrm_func_qstats_ext_output (size:1536b/192B) */ struct hwrm_func_qstats_ext_output { /* The specific error status for the command. */ uint16_t error_code; @@ -10941,6 +12751,8 @@ struct hwrm_func_qstats_ext_output { uint64_t rx_tpa_bytes; /* Number of TPA errors */ uint64_t rx_tpa_errors; + /* Number of TPA errors */ + uint64_t rx_tpa_events; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output @@ -11842,6 +13654,125 @@ struct hwrm_func_resource_qcaps_output { uint8_t valid; } __rte_packed; +/***************************** + * hwrm_func_vf_resource_cfg * + *****************************/ + + +/* hwrm_func_vf_resource_cfg_input (size:448b/56B) */ +struct hwrm_func_vf_resource_cfg_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* VF ID that is being configured by PF */ + uint16_t vf_id; + /* Maximum guaranteed number of MSI-X vectors for the function */ + uint16_t max_msix; + /* Minimum guaranteed number of RSS/COS contexts */ + uint16_t min_rsscos_ctx; + /* Maximum non-guaranteed number of RSS/COS contexts */ + uint16_t max_rsscos_ctx; + /* Minimum guaranteed number of completion rings */ + uint16_t min_cmpl_rings; + /* Maximum non-guaranteed number of completion rings */ + uint16_t max_cmpl_rings; + /* Minimum guaranteed number of transmit rings */ + uint16_t min_tx_rings; + /* Maximum non-guaranteed number of transmit rings */ + uint16_t max_tx_rings; + /* Minimum guaranteed number of receive rings */ + uint16_t min_rx_rings; + /* Maximum non-guaranteed number of receive rings */ + uint16_t max_rx_rings; + /* Minimum guaranteed number of L2 contexts */ + uint16_t min_l2_ctxs; + /* Maximum non-guaranteed number of L2 contexts */ + uint16_t max_l2_ctxs; + /* Minimum guaranteed number of VNICs */ + uint16_t min_vnics; + /* Maximum non-guaranteed number of VNICs */ + uint16_t max_vnics; + /* Minimum guaranteed number of statistic contexts */ + uint16_t min_stat_ctx; + /* Maximum non-guaranteed number of statistic contexts */ + uint16_t max_stat_ctx; + /* Minimum guaranteed number of ring groups */ + uint16_t min_hw_ring_grps; + /* Maximum non-guaranteed number of ring groups */ + uint16_t max_hw_ring_grps; + uint16_t flags; + /* + * If this bit is set, all minimum resources requested should be + * reserved if minimum >= 1, otherwise return error. In case of + * error, keep all existing reservations before the call. + */ + #define HWRM_FUNC_VF_RESOURCE_CFG_INPUT_FLAGS_MIN_GUARANTEED \ + UINT32_C(0x1) + uint8_t unused_0[2]; +} __rte_packed; + +/* hwrm_func_vf_resource_cfg_output (size:256b/32B) */ +struct hwrm_func_vf_resource_cfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* Reserved number of RSS/COS contexts */ + uint16_t reserved_rsscos_ctx; + /* Reserved number of completion rings */ + uint16_t reserved_cmpl_rings; + /* Reserved number of transmit rings */ + uint16_t reserved_tx_rings; + /* Reserved number of receive rings */ + uint16_t reserved_rx_rings; + /* Reserved number of L2 contexts */ + uint16_t reserved_l2_ctxs; + /* Reserved number of VNICs */ + uint16_t reserved_vnics; + /* Reserved number of statistic contexts */ + uint16_t reserved_stat_ctx; + /* Reserved number of ring groups */ + uint16_t reserved_hw_ring_grps; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + /********************************* * hwrm_func_backing_store_qcaps * *********************************/ @@ -15343,9 +17274,10 @@ struct hwrm_port_phy_cfg_input { * When set to 1, then the HWRM shall enable FEC autonegotitation * on this port if supported. When enabled, at least one of the * FEC modes must be advertised by enabling the fec_clause_74_enable, - * fec_clause_91_enable, fec_rs544_1xn_enable, or fec_rs544_2xn_enable - * flag. If none of the FEC mode is currently enabled, the HWRM - * shall choose a default advertisement setting. + * fec_clause_91_enable, fec_rs544_1xn_enable, fec_rs544_ieee_enable, + * fec_rs272_1xn_enable, or fec_rs272_ieee_enable flag. If none + * of the FEC mode is currently enabled, the HWRM shall choose + * a default advertisement setting. * The default advertisement setting can be queried by calling * hwrm_port_phy_qcfg. Note that the link speed must be * in autonegotiation mode for FEC autonegotiation to take effect. @@ -15357,7 +17289,8 @@ struct hwrm_port_phy_cfg_input { UINT32_C(0x100) /* * When set to 1, then the HWRM shall disable FEC autonegotiation - * on this port if supported. + * on this port and use forced FEC mode. In forced FEC mode, one + * or more FEC forced settings under the same clause can be set. * When set to 0, then this flag shall be ignored. * If FEC autonegotiation is not supported, then the HWRM shall ignore this * flag. @@ -15385,22 +17318,26 @@ struct hwrm_port_phy_cfg_input { #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE74_DISABLE \ UINT32_C(0x800) /* - * When set to 1, then the HWRM shall enable FEC CLAUSE 91 (Reed Solomon) - * on this port if supported, by advertising FEC CLAUSE 91 if - * FEC autonegotiation is enabled or force enabled otherwise. + * When set to 1, then the HWRM shall enable FEC CLAUSE 91 + * (Reed Solomon RS(528,514) for NRZ) on this port if supported, + * by advertising FEC RS(528,514) if FEC autonegotiation is enabled + * or force enabled otherwise. In forced FEC mode, this flag + * will only take effect if the speed is NRZ. Additional + * RS544 or RS272 flags (also under clause 91) may be set for PAM4 + * in forced FEC mode. * When set to 0, then this flag shall be ignored. - * If FEC CLAUSE 91 is not supported, then the HWRM shall ignore this - * flag. + * If FEC RS(528,514) is not supported, then the HWRM shall ignore + * this flag. */ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE91_ENABLE \ UINT32_C(0x1000) /* - * When set to 1, then the HWRM shall disable FEC CLAUSE 91 (Reed Solomon) - * on this port if supported, by not advertising FEC CLAUSE 91 if - * FEC autonegotiation is enabled or force disabled otherwise. - * When set to 0, then this flag shall be ignored. - * If FEC CLAUSE 91 is not supported, then the HWRM shall ignore this - * flag. + * When set to 1, then the HWRM shall disable FEC CLAUSE 91 + * (Reed Solomon RS(528,514) for NRZ) on this port if supported, by + * not advertising RS(528,514) if FEC autonegotiation is enabled or + * force disabled otherwise. When set to 0, then this flag shall be + * ignored. If FEC RS(528,514) is not supported, then the HWRM + * shall ignore this flag. */ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE91_DISABLE \ UINT32_C(0x2000) @@ -15428,6 +17365,9 @@ struct hwrm_port_phy_cfg_input { * When set to 1, then the HWRM shall enable FEC RS544_1XN * on this port if supported, by advertising FEC RS544_1XN if * FEC autonegotiation is enabled or force enabled otherwise. + * In forced mode, this flag will only take effect if the speed is + * PAM4. If this flag and fec_rs544_ieee_enable are set, the + * HWRM shall choose one of the RS544 modes. * When set to 0, then this flag shall be ignored. * If FEC RS544_1XN is not supported, then the HWRM shall ignore this * flag. @@ -15445,25 +17385,76 @@ struct hwrm_port_phy_cfg_input { #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_RS544_1XN_DISABLE \ UINT32_C(0x10000) /* - * When set to 1, then the HWRM shall enable FEC RS544_2XN - * on this port if supported, by advertising FEC RS544_2XN if + * When set to 1, then the HWRM shall enable FEC RS(544,514) + * on this port if supported, by advertising FEC RS(544,514) if * FEC autonegotiation is enabled or force enabled otherwise. + * In forced mode, this flag will only take effect if the speed is + * PAM4. If this flag and fec_rs544_1xn_enable are set, the + * HWRM shall choose one of the RS544 modes. * When set to 0, then this flag shall be ignored. - * If FEC RS544_2XN is not supported, then the HWRM shall ignore this - * flag. + * If FEC RS(544,514) is not supported, then the HWRM shall ignore + * this flag. */ - #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_RS544_2XN_ENABLE \ + #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_RS544_IEEE_ENABLE \ UINT32_C(0x20000) /* - * When set to 1, then the HWRM shall disable FEC RS544_2XN - * on this port if supported, by not advertising FEC RS544_2XN if + * When set to 1, then the HWRM shall disable FEC RS(544,514) + * on this port if supported, by not advertising FEC RS(544,514) if * FEC autonegotiation is enabled or force disabled otherwise. * When set to 0, then this flag shall be ignored. - * If FEC RS544_2XN is not supported, then the HWRM shall ignore this - * flag. + * If FEC RS(544,514) is not supported, then the HWRM shall ignore + * this flag. */ - #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_RS544_2XN_DISABLE \ + #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_RS544_IEEE_DISABLE \ UINT32_C(0x40000) + /* + * When set to 1, then the HWRM shall enable FEC RS272_1XN + * on this port if supported, by advertising FEC RS272_1XN if + * FEC autonegotiation is enabled or force enabled otherwise. + * In forced mode, this flag will only take effect if the speed is + * PAM4. If this flag and fec_rs272_ieee_enable are set, the + * HWRM shall choose one of the RS272 modes. Note that RS272 + * and RS544 modes cannot be set at the same time in forced FEC mode. + * When set to 0, then this flag shall be ignored. + * If FEC RS272_1XN is not supported, then the HWRM shall ignore this + * flag. + */ + #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_RS272_1XN_ENABLE \ + UINT32_C(0x80000) + /* + * When set to 1, then the HWRM shall disable FEC RS272_1XN + * on this port if supported, by not advertising FEC RS272_1XN if + * FEC autonegotiation is enabled or force disabled otherwise. + * When set to 0, then this flag shall be ignored. + * If FEC RS272_1XN is not supported, then the HWRM shall ignore + * this flag. + */ + #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_RS272_1XN_DISABLE \ + UINT32_C(0x100000) + /* + * When set to 1, then the HWRM shall enable FEC RS(272,257) + * on this port if supported, by advertising FEC RS(272,257) if + * FEC autonegotiation is enabled or force enabled otherwise. + * In forced mode, this flag will only take effect if the speed is + * PAM4. If this flag and fec_rs272_1xn_enable are set, the + * HWRM shall choose one of the RS272 modes. Note that RS272 + * and RS544 modes cannot be set at the same time in forced FEC mode. + * When set to 0, then this flag shall be ignored. + * If FEC RS(272,257) is not supported, then the HWRM shall ignore + * this flag. + */ + #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_RS272_IEEE_ENABLE \ + UINT32_C(0x200000) + /* + * When set to 1, then the HWRM shall disable FEC RS(272,257) + * on this port if supported, by not advertising FEC RS(272,257) if + * FEC autonegotiation is enabled or force disabled otherwise. + * When set to 0, then this flag shall be ignored. + * If FEC RS(272,257) is not supported, then the HWRM shall ignore + * this flag. + */ + #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_RS272_IEEE_DISABLE \ + UINT32_C(0x400000) uint32_t enables; /* * This bit must be '1' for the auto_mode field to be @@ -15531,6 +17522,18 @@ struct hwrm_port_phy_cfg_input { */ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_TX_LPI_TIMER \ UINT32_C(0x400) + /* + * This bit must be '1' for the force_pam4_link_speed field to be + * configured. + */ + #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_FORCE_PAM4_LINK_SPEED \ + UINT32_C(0x800) + /* + * This bit must be '1' for the auto_pam4_link_speed_mask field to + * be configured. + */ + #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_PAM4_LINK_SPEED_MASK \ + UINT32_C(0x1000) /* Port ID of port that is to be configured. */ uint16_t port_id; /* @@ -15559,8 +17562,6 @@ struct hwrm_port_phy_cfg_input { #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_50GB UINT32_C(0x1f4) /* 100Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_100GB UINT32_C(0x3e8) - /* 200Gb link speed */ - #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_200GB UINT32_C(0x7d0) /* 10Mb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_10MB UINT32_C(0xffff) #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_LAST \ @@ -15585,8 +17586,9 @@ struct hwrm_port_phy_cfg_input { */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ONE_OR_BELOW UINT32_C(0x3) /* - * Select the speeds based on the corresponding link speed mask value - * that is provided. + * Select the speeds based on the corresponding link speed mask values + * that are provided. The included speeds are specified in the + * auto_link_speed and auto_pam4_link_speed fields. */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_SPEED_MASK UINT32_C(0x4) #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_LAST \ @@ -15665,8 +17667,6 @@ struct hwrm_port_phy_cfg_input { #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_50GB UINT32_C(0x1f4) /* 100Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_100GB UINT32_C(0x3e8) - /* 200Gb link speed */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_200GB UINT32_C(0x7d0) /* 10Mb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_10MB UINT32_C(0xffff) #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_LAST \ @@ -15719,9 +17719,6 @@ struct hwrm_port_phy_cfg_input { /* 10Mb link speed (Full-duplex) */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10MB \ UINT32_C(0x2000) - /* 200Gb link speed */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_200GB \ - UINT32_C(0x4000) /* This value controls the wirespeed feature. */ uint8_t wirespeed; /* Wirespeed feature is disabled. */ @@ -15832,7 +17829,15 @@ struct hwrm_port_phy_cfg_input { uint32_t tx_lpi_timer; #define HWRM_PORT_PHY_CFG_INPUT_TX_LPI_TIMER_MASK UINT32_C(0xffffff) #define HWRM_PORT_PHY_CFG_INPUT_TX_LPI_TIMER_SFT 0 - uint32_t unused_3; + /* This field specifies which PAM4 speeds are enabled for auto mode. */ + uint16_t auto_link_pam4_speed_mask; + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_PAM4_SPEED_MASK_50G \ + UINT32_C(0x1) + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_PAM4_SPEED_MASK_100G \ + UINT32_C(0x2) + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_PAM4_SPEED_MASK_200G \ + UINT32_C(0x4) + uint8_t unused_2[2]; } __rte_packed; /* hwrm_port_phy_cfg_output (size:128b/16B) */ @@ -15945,8 +17950,54 @@ struct hwrm_port_phy_qcfg_output { #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_LINK UINT32_C(0x2) #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_LAST \ HWRM_PORT_PHY_QCFG_OUTPUT_LINK_LINK - uint8_t unused_0; - /* This value indicates the current link speed of the connection. */ + uint8_t active_fec_signal_mode; + /* + * This value indicates the current link signaling mode of the + * connection. + */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_SIGNAL_MODE_MASK \ + UINT32_C(0xf) + #define HWRM_PORT_PHY_QCFG_OUTPUT_SIGNAL_MODE_SFT 0 + /* NRZ signaling */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_SIGNAL_MODE_NRZ \ + UINT32_C(0x0) + /* PAM4 signaling */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_SIGNAL_MODE_PAM4 \ + UINT32_C(0x1) + #define HWRM_PORT_PHY_QCFG_OUTPUT_SIGNAL_MODE_LAST \ + HWRM_PORT_PHY_QCFG_OUTPUT_SIGNAL_MODE_PAM4 + /* This value indicates the current active FEC mode. */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_ACTIVE_FEC_MASK \ + UINT32_C(0xf0) + #define HWRM_PORT_PHY_QCFG_OUTPUT_ACTIVE_FEC_SFT 4 + /* No active FEC */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_ACTIVE_FEC_FEC_NONE_ACTIVE \ + (UINT32_C(0x0) << 4) + /* FEC CLAUSE 74 (Fire Code) active, autonegotiated or forced. */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_ACTIVE_FEC_FEC_CLAUSE74_ACTIVE \ + (UINT32_C(0x1) << 4) + /* FEC CLAUSE 91 RS(528,514) active, autonegoatiated or forced. */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_ACTIVE_FEC_FEC_CLAUSE91_ACTIVE \ + (UINT32_C(0x2) << 4) + /* FEC RS544_1XN active, autonegoatiated or forced. */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_ACTIVE_FEC_FEC_RS544_1XN_ACTIVE \ + (UINT32_C(0x3) << 4) + /* FEC RS(544,528) active, autonegoatiated or forced. */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_ACTIVE_FEC_FEC_RS544_IEEE_ACTIVE \ + (UINT32_C(0x4) << 4) + /* FEC RS272_1XN active, autonegotiated or forced. */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_ACTIVE_FEC_FEC_RS272_1XN_ACTIVE \ + (UINT32_C(0x5) << 4) + /* FEC RS(272,257) active, autonegoatiated or forced. */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_ACTIVE_FEC_FEC_RS272_IEEE_ACTIVE \ + (UINT32_C(0x6) << 4) + #define HWRM_PORT_PHY_QCFG_OUTPUT_ACTIVE_FEC_LAST \ + HWRM_PORT_PHY_QCFG_OUTPUT_ACTIVE_FEC_FEC_RS272_IEEE_ACTIVE + /* + * This value indicates the current link speed of the connection. + * The signal_mode field indicates if the link is using + * NRZ or PAM4 signaling. + */ uint16_t link_speed; /* 100Mb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_100MB UINT32_C(0x1) @@ -16003,7 +18054,7 @@ struct hwrm_port_phy_qcfg_output { #define HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_RX UINT32_C(0x2) /* * The supported speeds for the port. This is a bit mask. - * For each speed that is supported, the corrresponding + * For each speed that is supported, the corresponding * bit will be set to '1'. */ uint16_t support_speeds; @@ -16049,9 +18100,6 @@ struct hwrm_port_phy_qcfg_output { /* 10Mb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10MB \ UINT32_C(0x2000) - /* 200Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_200GB \ - UINT32_C(0x4000) /* * Current setting of forced link speed. * When the link speed is not being forced, this @@ -16081,9 +18129,6 @@ struct hwrm_port_phy_qcfg_output { /* 100Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_100GB \ UINT32_C(0x3e8) - /* 200Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_200GB \ - UINT32_C(0x7d0) /* 10Mb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_10MB \ UINT32_C(0xffff) @@ -16170,8 +18215,6 @@ struct hwrm_port_phy_qcfg_output { #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_50GB UINT32_C(0x1f4) /* 100Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_100GB UINT32_C(0x3e8) - /* 200Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_200GB UINT32_C(0x7d0) /* 10Mb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_10MB \ UINT32_C(0xffff) @@ -16227,9 +18270,6 @@ struct hwrm_port_phy_qcfg_output { /* 10Mb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10MB \ UINT32_C(0x2000) - /* 200Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_200GB \ - UINT32_C(0x4000) /* Current setting for wirespeed. */ uint8_t wirespeed; /* Wirespeed feature is disabled. */ @@ -16722,16 +18762,18 @@ struct hwrm_port_phy_qcfg_output { #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE74_ENABLED \ UINT32_C(0x10) /* - * When set to 1, then FEC CLAUSE 91 (Reed Solomon) is supported on this port. - * When set to 0, then FEC CLAUSE 91 (Reed Solomon) is not supported on this port. + * When set to 1, then FEC CLAUSE 91 (Reed Solomon RS(528,514) for + * NRZ) is supported on this port. + * When set to 0, then FEC RS(528,418) is not supported on this port. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_SUPPORTED \ UINT32_C(0x20) /* - * When set to 1, then FEC CLAUSE 91 (Reed Solomon) is enabled on this - * port. This means that FEC CLAUSE 91 is either advertised if - * FEC autonegotiation is enabled or FEC CLAUSE 91 is force enabled. - * When set to 0, then FEC CLAUSE 91 (Reed Solomon) is disabled if supported. + * When set to 1, then FEC CLAUSE 91 (Reed Solomon RS(528,514) for + * NRZ) is enabled on this port. This means that FEC RS(528,514) is + * either advertised if FEC autonegotiation is enabled or FEC + * RS(528,514) is force enabled. When set to 0, then FEC RS(528,514) + * is disabled if supported. * This flag should be ignored if FEC CLAUSE 91 is not supported on this port. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_ENABLED \ @@ -16752,59 +18794,49 @@ struct hwrm_port_phy_qcfg_output { #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS544_1XN_ENABLED \ UINT32_C(0x100) /* - * When set to 1, then FEC RS544_2XN is supported on this port. - * When set to 0, then FEC RS544_2XN is not supported on this port. + * When set to 1, then FEC RS(544,514) is supported on this port. + * When set to 0, then FEC RS(544,514) is not supported on this port. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS544_2XN_SUPPORTED \ + #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS544_IEEE_SUPPORTED \ UINT32_C(0x200) /* - * When set to 1, then RS544_2XN is enabled on this - * port. This means that FEC RS544_2XN is either advertised if - * FEC autonegotiation is enabled or FEC RS544_2XN is force enabled. - * When set to 0, then FEC RS544_2XN is disabled if supported. - * This flag should be ignored if FEC RS544_2XN is not supported on this port. + * When set to 1, then RS(544,514) is enabled on this + * port. This means that FEC RS(544,514) is either advertised if + * FEC autonegotiation is enabled or FEC RS(544,514) is force + * enabled. When set to 0, then FEC RS(544,514) is disabled if supported. + * This flag should be ignored if FEC RS(544,514) is not supported on this port. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS544_2XN_ENABLED \ + #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS544_IEEE_ENABLED \ UINT32_C(0x400) /* - * When set to 1, then FEC CLAUSE 74 (Fire Code) is active on this - * port, either successfully autonegoatiated or forced. - * When set to 0, then FEC CLAUSE 74 (Fire Code) is not active. - * This flag is only valid when link is up on this port. - * At most only one active FEC flags (fec_clause74_active, - * fec_clause91_active, fec_rs544_1xn, fec_rs544_2xn) can be set. + * When set to 1, then FEC RS272_1XN is supported on this port. + * When set to 0, then FEC RS272_1XN is not supported on this port. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE74_ACTIVE \ + #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS272_1XN_SUPPORTED \ UINT32_C(0x800) /* - * When set to 1, then FEC CLAUSE 91 (Reed Solomon) is active on this - * port, either successfully autonegoatiated or forced. - * When set to 0, then FEC CLAUSE 91 (Reed Solomon) is not active. - * This flag is only valid when link is up on this port. - * At most only one active FEC flags (fec_clause74_active, - * fec_clause91_active, fec_rs544_1xn, fec_rs544_2xn) can be set. + * When set to 1, then RS272_1XN is enabled on this + * port. This means that FEC RS272_1XN is either advertised if + * FEC autonegotiation is enabled or FEC RS272_1XN is force + * enabled. When set to 0, then FEC RS272_1XN is disabled if supported. + * This flag should be ignored if FEC RS272_1XN is not supported on this port. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_ACTIVE \ + #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS272_1XN_ENABLED \ UINT32_C(0x1000) /* - * When set to 1, then FEC RS544_1XN is active on this - * port, either successfully autonegoatiated or forced. - * When set to 0, then FEC RS544_1XN is not active. - * This flag is only valid when link is up on this port. - * At most only one active FEC flags (fec_clause74_active, - * fec_clause91_active, fec_rs544_1xn, fec_rs544_2xn) can be set. + * When set to 1, then FEC RS(272,514) is supported on this port. + * When set to 0, then FEC RS(272,514) is not supported on this port. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS544_1XN_ACTIVE \ + #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS272_IEEE_SUPPORTED \ UINT32_C(0x2000) /* - * When set to 1, then FEC RS544_2XN is active on this - * port, either successfully autonegoatiated or forced. - * When set to 0, then FEC RS544_2XN is not active. - * This flag is only valid when link is up on this port. - * At most only one active FEC flags (fec_clause74_active, - * fec_clause91_active, fec_rs544_1xn, fec_rs544_2xn) can be set. + * When set to 1, then RS(272,257) is enabled on this + * port. This means that FEC RS(272,257) is either advertised if + * FEC autonegotiation is enabled or FEC RS(272,257) is force + * enabled. When set to 0, then FEC RS(272,257) is disabled if supported. + * This flag should be ignored if FEC RS(272,257) is not supported on this port. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS544_2XN_ACTIVE \ + #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS272_IEEE_ENABLED \ UINT32_C(0x4000) /* * This value is indicates the duplex of the current @@ -16836,7 +18868,63 @@ struct hwrm_port_phy_qcfg_output { * part number is not available. */ char phy_vendor_partnumber[16]; - uint8_t unused_2[7]; + /* + * The supported PAM4 speeds for the port. This is a bit mask. + * For each speed that is supported, the corresponding + * bit will be set to '1'. + */ + uint16_t support_pam4_speeds; + #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_PAM4_SPEEDS_50G \ + UINT32_C(0x1) + #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_PAM4_SPEEDS_100G \ + UINT32_C(0x2) + #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_PAM4_SPEEDS_200G \ + UINT32_C(0x4) + /* + * Current setting of forced PAM4 link speed. + * When the link speed is not being forced, this + * value shall be set to 0. + */ + uint16_t force_pam4_link_speed; + /* 50Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_PAM4_LINK_SPEED_50GB \ + UINT32_C(0x1f4) + /* 100Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_PAM4_LINK_SPEED_100GB \ + UINT32_C(0x3e8) + /* 200Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_PAM4_LINK_SPEED_200GB \ + UINT32_C(0x7d0) + #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_PAM4_LINK_SPEED_LAST \ + HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_PAM4_LINK_SPEED_200GB + /* + * Current setting for auto_pam4_link_speed_mask that is used to + * advertise speeds during autonegotiation. + * This field is only valid when auto_mode is set to "mask". + * The speeds specified in this field shall be a subset of + * supported speeds on this port. + */ + uint16_t auto_pam4_link_speed_mask; + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAM4_LINK_SPEED_MASK_50G \ + UINT32_C(0x1) + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAM4_LINK_SPEED_MASK_100G \ + UINT32_C(0x2) + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAM4_LINK_SPEED_MASK_200G \ + UINT32_C(0x4) + /* + * The advertised PAM4 speeds for the port by the link partner. + * Each advertised speed will be set to '1'. + */ + uint8_t link_partner_pam4_adv_speeds; + /* 50Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_PAM4_ADV_SPEEDS_50GB \ + UINT32_C(0x1) + /* 100Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_PAM4_ADV_SPEEDS_100GB \ + UINT32_C(0x2) + /* 200Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_PAM4_ADV_SPEEDS_200GB \ + UINT32_C(0x4) /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -19036,7 +21124,7 @@ struct hwrm_port_lpbk_qstats_output { ************************/ -/* hwrm_port_ecn_qstats_input (size:192b/24B) */ +/* hwrm_port_ecn_qstats_input (size:256b/32B) */ struct hwrm_port_ecn_qstats_input { /* The HWRM command request type. */ uint16_t req_type; @@ -19071,10 +21159,31 @@ struct hwrm_port_ecn_qstats_input { * multi-host mode. */ uint16_t port_id; - uint8_t unused_0[6]; + /* + * Size of the DMA buffer the caller has allocated for the firmware to + * write into. + */ + uint16_t ecn_stat_buf_size; + uint8_t flags; + /* This value is not used to avoid backward compatibility issues. */ + #define HWRM_PORT_ECN_QSTATS_INPUT_FLAGS_UNUSED UINT32_C(0x0) + /* + * This bit is set to 1 when request is for a counter mask, + * representing the width of each of the stats counters, rather + * than counters themselves. + */ + #define HWRM_PORT_ECN_QSTATS_INPUT_FLAGS_COUNTER_MASK UINT32_C(0x1) + #define HWRM_PORT_ECN_QSTATS_INPUT_FLAGS_LAST \ + HWRM_PORT_ECN_QSTATS_INPUT_FLAGS_COUNTER_MASK + uint8_t unused_0[3]; + /* + * This is the host address where + * ECN port statistics will be stored + */ + uint64_t ecn_stat_host_addr; } __rte_packed; -/* hwrm_port_ecn_qstats_output (size:384b/48B) */ +/* hwrm_port_ecn_qstats_output (size:128b/16B) */ struct hwrm_port_ecn_qstats_output { /* The specific error status for the command. */ uint16_t error_code; @@ -19084,28 +21193,14 @@ struct hwrm_port_ecn_qstats_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* Number of packets marked in CoS queue 0. */ - uint32_t mark_cnt_cos0; - /* Number of packets marked in CoS queue 1. */ - uint32_t mark_cnt_cos1; - /* Number of packets marked in CoS queue 2. */ - uint32_t mark_cnt_cos2; - /* Number of packets marked in CoS queue 3. */ - uint32_t mark_cnt_cos3; - /* Number of packets marked in CoS queue 4. */ - uint32_t mark_cnt_cos4; - /* Number of packets marked in CoS queue 5. */ - uint32_t mark_cnt_cos5; - /* Number of packets marked in CoS queue 6. */ - uint32_t mark_cnt_cos6; - /* Number of packets marked in CoS queue 7. */ - uint32_t mark_cnt_cos7; + /* Number of bytes of stats the firmware wrote to the DMA buffer. */ + uint16_t ecn_stat_buf_size; /* * Bitmask that indicates which CoS queues have ECN marking enabled. * Bit i corresponds to CoS queue i. */ uint8_t mark_en; - uint8_t unused_0[6]; + uint8_t unused_0[4]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -19116,6 +21211,59 @@ struct hwrm_port_ecn_qstats_output { uint8_t valid; } __rte_packed; +/* ECN mark statistics format */ +/* port_stats_ecn (size:512b/64B) */ +struct port_stats_ecn { + /* + * Number of packets marked in CoS queue 0. + * Or, if the driver requested counter masks, a mask to indicate the size + * of the counter. + */ + uint64_t mark_cnt_cos0; + /* + * Number of packets marked in CoS queue 1. + * Or, if the driver requested counter masks, a mask to indicate the size + * of the counter. + */ + uint64_t mark_cnt_cos1; + /* + * Number of packets marked in CoS queue 2. + * Or, if the driver requested counter masks, a mask to indicate the size + * of the counter. + */ + uint64_t mark_cnt_cos2; + /* + * Number of packets marked in CoS queue 3. + * Or, if the driver requested counter masks, a mask to indicate the size + * of the counter. + */ + uint64_t mark_cnt_cos3; + /* + * Number of packets marked in CoS queue 4. + * Or, if the driver requested counter masks, a mask to indicate the size + * of the counter. + */ + uint64_t mark_cnt_cos4; + /* + * Number of packets marked in CoS queue 5. + * Or, if the driver requested counter masks, a mask to indicate the size + * of the counter. + */ + uint64_t mark_cnt_cos5; + /* + * Number of packets marked in CoS queue 6. + * Or, if the driver requested counter masks, a mask to indicate the size + * of the counter. + */ + uint64_t mark_cnt_cos6; + /* + * Number of packets marked in CoS queue 7. + * Or, if the driver requested counter masks, a mask to indicate the size + * of the counter. + */ + uint64_t mark_cnt_cos7; +} __rte_packed; + /*********************** * hwrm_port_clr_stats * ***********************/ @@ -19228,7 +21376,7 @@ struct hwrm_port_phy_qcaps_input { uint8_t unused_0[6]; } __rte_packed; -/* hwrm_port_phy_qcaps_output (size:192b/24B) */ +/* hwrm_port_phy_qcaps_output (size:256b/32B) */ struct hwrm_port_phy_qcaps_output { /* The specific error status for the command. */ uint16_t error_code; @@ -19277,14 +21425,20 @@ struct hwrm_port_phy_qcaps_output { */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_CUMULATIVE_COUNTERS_ON_RESET \ UINT32_C(0x10) + /* + * If set to 1, then this field indicates that the + * local loopback is not supported on this controller. + */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_LOCAL_LPBK_NOT_SUPPORTED \ + UINT32_C(0x20) /* * Reserved field. The HWRM shall set this field to 0. * An HWRM client shall ignore this field. */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_RSVD1_MASK \ - UINT32_C(0xe0) + UINT32_C(0xc0) #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_RSVD1_SFT \ - 5 + 6 /* Number of front panel ports for this device. */ uint8_t port_cnt; /* Not supported or unknown */ @@ -19348,9 +21502,6 @@ struct hwrm_port_phy_qcaps_output { /* 10Mb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_10MB \ UINT32_C(0x2000) - /* 200Gb link speed */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_200GB \ - UINT32_C(0x4000) /* * This is a bit mask to indicate what speeds are supported * for autonegotiation on this link. @@ -19400,9 +21551,6 @@ struct hwrm_port_phy_qcaps_output { /* 10Mb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_10MB \ UINT32_C(0x2000) - /* 200Gb link speed */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_200GB \ - UINT32_C(0x4000) /* * This is a bit mask to indicate what speeds are supported * for EEE on this link. @@ -19457,6 +21605,36 @@ struct hwrm_port_phy_qcaps_output { #define HWRM_PORT_PHY_QCAPS_OUTPUT_TX_LPI_TIMER_HIGH_MASK \ UINT32_C(0xffffff) #define HWRM_PORT_PHY_QCAPS_OUTPUT_TX_LPI_TIMER_HIGH_SFT 0 + /* + * Reserved field. The HWRM shall set this field to 0. + * An HWRM client shall ignore this field. + */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_RSVD_MASK \ + UINT32_C(0xff000000) + #define HWRM_PORT_PHY_QCAPS_OUTPUT_RSVD_SFT 24 + /* + * This field is used to advertise which PAM4 speeds are supported + * in auto mode. + */ + uint16_t supported_pam4_speeds_auto_mode; + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_PAM4_SPEEDS_AUTO_MODE_50G \ + UINT32_C(0x1) + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_PAM4_SPEEDS_AUTO_MODE_100G \ + UINT32_C(0x2) + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_PAM4_SPEEDS_AUTO_MODE_200G \ + UINT32_C(0x4) + /* + * This field is used to advertise which PAM4 speeds are supported + * in forced mode. + */ + uint16_t supported_pam4_speeds_force_mode; + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_PAM4_SPEEDS_FORCE_MODE_50G \ + UINT32_C(0x1) + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_PAM4_SPEEDS_FORCE_MODE_100G \ + UINT32_C(0x2) + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_PAM4_SPEEDS_FORCE_MODE_200G \ + UINT32_C(0x4) + uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -19464,9 +21642,7 @@ struct hwrm_port_phy_qcaps_output { * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_VALID_MASK \ - UINT32_C(0xff000000) - #define HWRM_PORT_PHY_QCAPS_OUTPUT_VALID_SFT 24 + uint8_t valid; } __rte_packed; /**************************** @@ -21383,6 +23559,161 @@ struct hwrm_port_phy_mdio_bus_release_output { uint8_t valid; } __rte_packed; +/************************ + * hwrm_port_tx_fir_cfg * + ************************/ + + +/* hwrm_port_tx_fir_cfg_input (size:320b/40B) */ +struct hwrm_port_tx_fir_cfg_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* Modulation types of TX FIR: NRZ, PAM4. */ + uint8_t mod_type; + /* For NRZ */ + #define HWRM_PORT_TX_FIR_CFG_INPUT_MOD_TYPE_NRZ UINT32_C(0x0) + /* For PAM4 */ + #define HWRM_PORT_TX_FIR_CFG_INPUT_MOD_TYPE_PAM4 UINT32_C(0x1) + #define HWRM_PORT_TX_FIR_CFG_INPUT_MOD_TYPE_LAST \ + HWRM_PORT_TX_FIR_CFG_INPUT_MOD_TYPE_PAM4 + /* The lane mask of the lane TX FIR will be configured. */ + uint8_t lane_mask; + uint8_t unused_0[2]; + /* Value1 of TX FIR, required for NRZ or PAM4. */ + uint32_t txfir_val_1; + /* Value2 of TX FIR, required for NRZ or PAM4. */ + uint32_t txfir_val_2; + /* Value3 of TX FIR, required for PAM4. */ + uint32_t txfir_val_3; + /* Value4 of TX FIR, required for PAM4. */ + uint32_t txfir_val_4; + uint8_t unused_1[4]; +} __rte_packed; + +/* hwrm_port_tx_fir_cfg_output (size:128b/16B) */ +struct hwrm_port_tx_fir_cfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/************************* + * hwrm_port_tx_fir_qcfg * + *************************/ + + +/* hwrm_port_tx_fir_qcfg_input (size:192b/24B) */ +struct hwrm_port_tx_fir_qcfg_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* Modulation types of TX FIR: NRZ, PAM4. */ + uint8_t mod_type; + /* For NRZ */ + #define HWRM_PORT_TX_FIR_QCFG_INPUT_MOD_TYPE_NRZ UINT32_C(0x0) + /* For PAM4 */ + #define HWRM_PORT_TX_FIR_QCFG_INPUT_MOD_TYPE_PAM4 UINT32_C(0x1) + #define HWRM_PORT_TX_FIR_QCFG_INPUT_MOD_TYPE_LAST \ + HWRM_PORT_TX_FIR_QCFG_INPUT_MOD_TYPE_PAM4 + /* The ID of the lane TX FIR will be queried. */ + uint8_t lane_id; + uint8_t unused[6]; +} __rte_packed; + +/* hwrm_port_tx_fir_qcfg_output (size:256b/32B) */ +struct hwrm_port_tx_fir_qcfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* Value1 of TX FIR, required for NRZ or PAM4. */ + uint32_t txfir_val_1; + /* Value2 of TX FIR, required for NRZ or PAM4. */ + uint32_t txfir_val_2; + /* Value3 of TX FIR, required for PAM4. */ + uint32_t txfir_val_3; + /* Value4 of TX FIR, required for PAM4. */ + uint32_t txfir_val_4; + uint8_t unused[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + /*********************** * hwrm_queue_qportcfg * ***********************/ @@ -21546,8 +23877,10 @@ struct hwrm_queue_qportcfg_output { * that takes a queue id. * # IDs must always be queried by this command before any use * by the driver or software. - * # Any driver or software should not make any assumptions about - * queue IDs. + * # The CoS queue index is obtained by applying modulo 10 to the + * CoS queue ID. Valid CoS queue indexes are in the range of 0 to 7. + * The CoS queue index is used to reference port statistics for the + * CoS queue. * # A value of 0xff indicates that the queue is not available. * # Available queues may not be in sequential order. */ @@ -21582,8 +23915,10 @@ struct hwrm_queue_qportcfg_output { * that takes a queue id. * # IDs must always be queried by this command before any use * by the driver or software. - * # Any driver or software should not make any assumptions about - * queue IDs. + * # The CoS queue index is obtained by applying modulo 10 to the + * CoS queue ID. Valid CoS queue indexes are in the range of 0 to 7. + * The CoS queue index is used to reference port statistics for the + * CoS queue. * # A value of 0xff indicates that the queue is not available. * # Available queues may not be in sequential order. */ @@ -21618,8 +23953,10 @@ struct hwrm_queue_qportcfg_output { * that takes a queue id. * # IDs must always be queried by this command before any use * by the driver or software. - * # Any driver or software should not make any assumptions about - * queue IDs. + * # The CoS queue index is obtained by applying modulo 10 to the + * CoS queue ID. Valid CoS queue indexes are in the range of 0 to 7. + * The CoS queue index is used to reference port statistics for the + * CoS queue. * # A value of 0xff indicates that the queue is not available. * # Available queues may not be in sequential order. */ @@ -21654,8 +23991,10 @@ struct hwrm_queue_qportcfg_output { * that takes a queue id. * # IDs must always be queried by this command before any use * by the driver or software. - * # Any driver or software should not make any assumptions about - * queue IDs. + * # The CoS queue index is obtained by applying modulo 10 to the + * CoS queue ID. Valid CoS queue indexes are in the range of 0 to 7. + * The CoS queue index is used to reference port statistics for the + * CoS queue. * # A value of 0xff indicates that the queue is not available. * # Available queues may not be in sequential order. */ @@ -21690,8 +24029,10 @@ struct hwrm_queue_qportcfg_output { * that takes a queue id. * # IDs must always be queried by this command before any use * by the driver or software. - * # Any driver or software should not make any assumptions about - * queue IDs. + * # The CoS queue index is obtained by applying modulo 10 to the + * CoS queue ID. Valid CoS queue indexes are in the range of 0 to 7. + * The CoS queue index is used to reference port statistics for the + * CoS queue. * # A value of 0xff indicates that the queue is not available. * # Available queues may not be in sequential order. */ @@ -21726,8 +24067,10 @@ struct hwrm_queue_qportcfg_output { * that takes a queue id. * # IDs must always be queried by this command before any use * by the driver or software. - * # Any driver or software should not make any assumptions about - * queue IDs. + * # The CoS queue index is obtained by applying modulo 10 to the + * CoS queue ID. Valid CoS queue indexes are in the range of 0 to 7. + * The CoS queue index is used to reference port statistics for the + * CoS queue. * # A value of 0xff indicates that the queue is not available. * # Available queues may not be in sequential order. */ @@ -21762,8 +24105,10 @@ struct hwrm_queue_qportcfg_output { * that takes a queue id. * # IDs must always be queried by this command before any use * by the driver or software. - * # Any driver or software should not make any assumptions about - * queue IDs. + * # The CoS queue index is obtained by applying modulo 10 to the + * CoS queue ID. Valid CoS queue indexes are in the range of 0 to 7. + * The CoS queue index is used to reference port statistics for the + * CoS queue. * # A value of 0xff indicates that the queue is not available. * # Available queues may not be in sequential order. */ @@ -21798,8 +24143,10 @@ struct hwrm_queue_qportcfg_output { * that takes a queue id. * # IDs must always be queried by this command before any use * by the driver or software. - * # Any driver or software should not make any assumptions about - * queue IDs. + * # The CoS queue index is obtained by applying modulo 10 to the + * CoS queue ID. Valid CoS queue indexes are in the range of 0 to 7. + * The CoS queue index is used to reference port statistics for the + * CoS queue. * # A value of 0xff indicates that the queue is not available. * # Available queues may not be in sequential order. */ @@ -25685,7 +28032,7 @@ struct hwrm_vnic_cfg_input { * queue ID will be arriving on this VNIC. Packet priority to CoS mapping * rules can be specified using HWRM_QUEUE_PRI2COS_CFG. In this mode, * ntuple filters with VNIC destination specified are invalid since they - * conflict with the the CoS to VNIC steering rules in this mode. + * conflict with the CoS to VNIC steering rules in this mode. * * If this field is not specified, packet to VNIC steering will be * subject to the standard L2 filter rules and any additional ntuple @@ -27155,6 +29502,12 @@ struct hwrm_ring_alloc_input { */ #define HWRM_RING_ALLOC_INPUT_ENABLES_SCHQ_ID \ UINT32_C(0x200) + /* + * This bit must be '1' for the mpc_chnls_type field to be + * configured. + */ + #define HWRM_RING_ALLOC_INPUT_ENABLES_MPC_CHNLS_TYPE \ + UINT32_C(0x400) /* Ring Type. */ uint8_t ring_type; /* L2 Completion Ring (CR) */ @@ -27387,7 +29740,36 @@ struct hwrm_ring_alloc_input { #define HWRM_RING_ALLOC_INPUT_INT_MODE_POLL UINT32_C(0x3) #define HWRM_RING_ALLOC_INPUT_INT_MODE_LAST \ HWRM_RING_ALLOC_INPUT_INT_MODE_POLL - uint8_t unused_4[3]; + /* Midpath channel type */ + uint8_t mpc_chnls_type; + /* + * Indicate the TX ring alloc MPC channel type is a MPC channel + * with destination to the TX crypto engine block. + */ + #define HWRM_RING_ALLOC_INPUT_MPC_CHNLS_TYPE_TCE UINT32_C(0x0) + /* + * Indicate the RX ring alloc MPC channel type is a MPC channel + * with destination to the RX crypto engine block. + */ + #define HWRM_RING_ALLOC_INPUT_MPC_CHNLS_TYPE_RCE UINT32_C(0x1) + /* + * Indicate the RX ring alloc MPC channel type is a MPC channel + * with destination to the TX configurable flow processing block. + */ + #define HWRM_RING_ALLOC_INPUT_MPC_CHNLS_TYPE_TE_CFA UINT32_C(0x2) + /* + * Indicate the RX ring alloc MPC channel type is a MPC channel + * with destination to the RX configurable flow processing block. + */ + #define HWRM_RING_ALLOC_INPUT_MPC_CHNLS_TYPE_RE_CFA UINT32_C(0x3) + /* + * Indicate the RX ring alloc MPC channel type is a MPC channel + * with destination to the primate processor block. + */ + #define HWRM_RING_ALLOC_INPUT_MPC_CHNLS_TYPE_PRIMATE UINT32_C(0x4) + #define HWRM_RING_ALLOC_INPUT_MPC_CHNLS_TYPE_LAST \ + HWRM_RING_ALLOC_INPUT_MPC_CHNLS_TYPE_PRIMATE + uint8_t unused_4[2]; /* * The cq_handle is specified when allocating a completion ring. For * devices that support NQs, this cq_handle will be included in the @@ -35243,13 +37625,13 @@ struct hwrm_cfa_tcp_flag_process_qcfg_output { uint8_t valid; } __rte_packed; -/********************** - * hwrm_cfa_pair_info * - **********************/ +/************************** + * hwrm_cfa_vf_pair_alloc * + **************************/ -/* hwrm_cfa_pair_info_input (size:448b/56B) */ -struct hwrm_cfa_pair_info_input { +/* hwrm_cfa_vf_pair_alloc_input (size:448b/56B) */ +struct hwrm_cfa_vf_pair_alloc_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -35278,23 +37660,17 @@ struct hwrm_cfa_pair_info_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - uint32_t flags; - /* If this flag is set, lookup by name else lookup by index. */ - #define HWRM_CFA_PAIR_INFO_INPUT_FLAGS_LOOKUP_TYPE UINT32_C(0x1) - /* If this flag is set, lookup by PF id and VF id. */ - #define HWRM_CFA_PAIR_INFO_INPUT_FLAGS_LOOKUP_REPRE UINT32_C(0x2) - /* Pair table index. */ - uint16_t pair_index; - /* Pair pf index. */ - uint8_t pair_pfid; - /* Pair vf index. */ - uint8_t pair_vfid; - /* Pair name (32 byte string). */ + /* Logical VF number (range: 0 -> MAX_VFS -1). */ + uint16_t vf_a_id; + /* Logical VF number (range: 0 -> MAX_VFS -1). */ + uint16_t vf_b_id; + uint8_t unused_0[4]; + /* VF Pair name (32 byte string). */ char pair_name[32]; } __rte_packed; -/* hwrm_cfa_pair_info_output (size:576b/72B) */ -struct hwrm_cfa_pair_info_output { +/* hwrm_cfa_vf_pair_alloc_output (size:128b/16B) */ +struct hwrm_cfa_vf_pair_alloc_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -35303,56 +37679,6 @@ struct hwrm_cfa_pair_info_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* Pair table index. */ - uint16_t next_pair_index; - /* Pair member a's fid. */ - uint16_t a_fid; - /* Logical host number. */ - uint8_t host_a_index; - /* Logical PF number. */ - uint8_t pf_a_index; - /* Pair member a's Linux logical VF number. */ - uint16_t vf_a_index; - /* Rx CFA code. */ - uint16_t rx_cfa_code_a; - /* Tx CFA action. */ - uint16_t tx_cfa_action_a; - /* Pair member b's fid. */ - uint16_t b_fid; - /* Logical host number. */ - uint8_t host_b_index; - /* Logical PF number. */ - uint8_t pf_b_index; - /* Pair member a's Linux logical VF number. */ - uint16_t vf_b_index; - /* Rx CFA code. */ - uint16_t rx_cfa_code_b; - /* Tx CFA action. */ - uint16_t tx_cfa_action_b; - /* Pair mode (0-vf2fn, 1-rep2fn, 2-rep2rep, 3-proxy, 4-pfpair). */ - uint8_t pair_mode; - /* Pair between VF on local host with PF or VF on specified host. */ - #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_VF2FN UINT32_C(0x0) - /* Pair between REP on local host with PF or VF on specified host. */ - #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_REP2FN UINT32_C(0x1) - /* Pair between REP on local host with REP on specified host. */ - #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_REP2REP UINT32_C(0x2) - /* Pair for the proxy interface. */ - #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_PROXY UINT32_C(0x3) - /* Pair for the PF interface. */ - #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_PFPAIR UINT32_C(0x4) - #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_LAST \ - HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_PFPAIR - /* Pair state. */ - uint8_t pair_state; - /* Pair has been allocated */ - #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_ALLOCATED UINT32_C(0x1) - /* Both pair members are active */ - #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_ACTIVE UINT32_C(0x2) - #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_LAST \ - HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_ACTIVE - /* Pair name (32 byte string). */ - char pair_name[32]; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output @@ -35364,13 +37690,13 @@ struct hwrm_cfa_pair_info_output { uint8_t valid; } __rte_packed; -/********************** - * hwrm_cfa_vfr_alloc * - **********************/ +/************************* + * hwrm_cfa_vf_pair_free * + *************************/ -/* hwrm_cfa_vfr_alloc_input (size:448b/56B) */ -struct hwrm_cfa_vfr_alloc_input { +/* hwrm_cfa_vf_pair_free_input (size:384b/48B) */ +struct hwrm_cfa_vf_pair_free_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -35399,20 +37725,12 @@ struct hwrm_cfa_vfr_alloc_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* Logical VF number (range: 0 -> MAX_VFS -1). */ - uint16_t vf_id; - /* - * This field is reserved for the future use. - * It shall be set to 0. - */ - uint16_t reserved; - uint8_t unused_0[4]; - /* VF Representor name (32 byte string). */ - char vfr_name[32]; + /* VF Pair name (32 byte string). */ + char pair_name[32]; } __rte_packed; -/* hwrm_cfa_vfr_alloc_output (size:128b/16B) */ -struct hwrm_cfa_vfr_alloc_output { +/* hwrm_cfa_vf_pair_free_output (size:128b/16B) */ +struct hwrm_cfa_vf_pair_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -35421,14 +37739,10 @@ struct hwrm_cfa_vfr_alloc_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* Rx CFA code. */ - uint16_t rx_cfa_code; - /* Tx CFA action. */ - uint16_t tx_cfa_action; - uint8_t unused_0[3]; + uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -35436,13 +37750,13 @@ struct hwrm_cfa_vfr_alloc_output { uint8_t valid; } __rte_packed; -/********************* - * hwrm_cfa_vfr_free * - *********************/ +/************************* + * hwrm_cfa_vf_pair_info * + *************************/ -/* hwrm_cfa_vfr_free_input (size:448b/56B) */ -struct hwrm_cfa_vfr_free_input { +/* hwrm_cfa_vf_pair_info_input (size:448b/56B) */ +struct hwrm_cfa_vf_pair_info_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -35471,16 +37785,18 @@ struct hwrm_cfa_vfr_free_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* VF Representor name (32 byte string). */ - char vfr_name[32]; - /* Logical VF number (range: 0 -> MAX_VFS -1). */ - uint16_t vf_id; - uint16_t reserved; - uint8_t unused_0[4]; + uint32_t flags; + /* If this flag is set, lookup by name else lookup by index. */ + #define HWRM_CFA_VF_PAIR_INFO_INPUT_FLAGS_LOOKUP_TYPE UINT32_C(0x1) + /* vf pair table index. */ + uint16_t vf_pair_index; + uint8_t unused_0[2]; + /* VF Pair name (32 byte string). */ + char vf_pair_name[32]; } __rte_packed; -/* hwrm_cfa_vfr_free_output (size:128b/16B) */ -struct hwrm_cfa_vfr_free_output { +/* hwrm_cfa_vf_pair_info_output (size:512b/64B) */ +struct hwrm_cfa_vf_pair_info_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -35489,10 +37805,31 @@ struct hwrm_cfa_vfr_free_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - uint8_t unused_0[7]; + /* vf pair table index. */ + uint16_t next_vf_pair_index; + /* vf pair member a's vf_fid. */ + uint16_t vf_a_fid; + /* vf pair member a's Linux logical VF number. */ + uint16_t vf_a_index; + /* vf pair member b's vf_fid. */ + uint16_t vf_b_fid; + /* vf pair member a's Linux logical VF number. */ + uint16_t vf_b_index; + /* vf pair state. */ + uint8_t pair_state; + /* Pair has been allocated */ + #define HWRM_CFA_VF_PAIR_INFO_OUTPUT_PAIR_STATE_ALLOCATED UINT32_C(0x1) + /* Both pair members are active */ + #define HWRM_CFA_VF_PAIR_INFO_OUTPUT_PAIR_STATE_ACTIVE UINT32_C(0x2) + #define HWRM_CFA_VF_PAIR_INFO_OUTPUT_PAIR_STATE_LAST \ + HWRM_CFA_VF_PAIR_INFO_OUTPUT_PAIR_STATE_ACTIVE + uint8_t unused_0[5]; + /* VF Pair name (32 byte string). */ + char pair_name[32]; + uint8_t unused_1[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -35500,15 +37837,522 @@ struct hwrm_cfa_vfr_free_output { uint8_t valid; } __rte_packed; +/*********************** + * hwrm_cfa_pair_alloc * + ***********************/ -/*************************************** - * hwrm_cfa_redirect_query_tunnel_type * - ***************************************/ - - -/* hwrm_cfa_redirect_query_tunnel_type_input (size:192b/24B) */ -struct hwrm_cfa_redirect_query_tunnel_type_input { +/* hwrm_cfa_pair_alloc_input (size:576b/72B) */ +struct hwrm_cfa_pair_alloc_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* + * Pair mode (0-vf2fn, 1-rep2fn, 2-rep2rep, 3-proxy, 4-pfpair, + * 5-rep2fn_mod, 6-rep2fn_modall, 7-rep2fn_truflow). + */ + uint16_t pair_mode; + /* Pair between VF on local host with PF or VF on specified host. */ + #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_VF2FN \ + UINT32_C(0x0) + /* Pair between REP on local host with PF or VF on specified host. */ + #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2FN \ + UINT32_C(0x1) + /* Pair between REP on local host with REP on specified host. */ + #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2REP \ + UINT32_C(0x2) + /* Pair for the proxy interface. */ + #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_PROXY \ + UINT32_C(0x3) + /* Pair for the PF interface. */ + #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_PFPAIR \ + UINT32_C(0x4) + /* Modify existing rep2fn pair and move pair to new PF. */ + #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2FN_MOD \ + UINT32_C(0x5) + /* Modify existing rep2fn pairs paired with same PF and move pairs to new PF. */ + #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2FN_MODALL \ + UINT32_C(0x6) + /* Truflow pair between REP on local host with PF or VF on specified host. */ + #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2FN_TRUFLOW \ + UINT32_C(0x7) + #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_LAST \ + HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2FN_TRUFLOW + /* Logical VF number (range: 0 -> MAX_VFS -1). */ + uint16_t vf_a_id; + /* Logical Host (0xff-local host). */ + uint8_t host_b_id; + /* Logical PF (0xff-PF for command channel). */ + uint8_t pf_b_id; + /* Logical VF number (range: 0 -> MAX_VFS -1). */ + uint16_t vf_b_id; + /* Loopback port (0xff-internal loopback), valid for mode-3. */ + uint8_t port_id; + /* Priority used for encap of loopback packets valid for mode-3. */ + uint8_t pri; + /* New PF for rep2fn modify, valid for mode 5. */ + uint16_t new_pf_fid; + uint32_t enables; + /* + * This bit must be '1' for the q_ab field to be + * configured. + */ + #define HWRM_CFA_PAIR_ALLOC_INPUT_ENABLES_Q_AB_VALID UINT32_C(0x1) + /* + * This bit must be '1' for the q_ba field to be + * configured. + */ + #define HWRM_CFA_PAIR_ALLOC_INPUT_ENABLES_Q_BA_VALID UINT32_C(0x2) + /* + * This bit must be '1' for the fc_ab field to be + * configured. + */ + #define HWRM_CFA_PAIR_ALLOC_INPUT_ENABLES_FC_AB_VALID UINT32_C(0x4) + /* + * This bit must be '1' for the fc_ba field to be + * configured. + */ + #define HWRM_CFA_PAIR_ALLOC_INPUT_ENABLES_FC_BA_VALID UINT32_C(0x8) + /* VF Pair name (32 byte string). */ + char pair_name[32]; + /* + * The q_ab value specifies the logical index of the TX/RX CoS + * queue to be assigned for traffic in the A to B direction of + * the interface pair. The default value is 0. + */ + uint8_t q_ab; + /* + * The q_ba value specifies the logical index of the TX/RX CoS + * queue to be assigned for traffic in the B to A direction of + * the interface pair. The default value is 1. + */ + uint8_t q_ba; + /* + * Specifies whether RX ring flow control is disabled (0) or enabled + * (1) in the A to B direction. The default value is 0, meaning that + * packets will be dropped when the B-side RX rings are full. + */ + uint8_t fc_ab; + /* + * Specifies whether RX ring flow control is disabled (0) or enabled + * (1) in the B to A direction. The default value is 1, meaning that + * the RX CoS queue will be flow controlled when the A-side RX rings + * are full. + */ + uint8_t fc_ba; + uint8_t unused_1[4]; +} __rte_packed; + +/* hwrm_cfa_pair_alloc_output (size:192b/24B) */ +struct hwrm_cfa_pair_alloc_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* Only valid for modes 1 and 2. */ + uint16_t rx_cfa_code_a; + /* Only valid for modes 1 and 2. */ + uint16_t tx_cfa_action_a; + /* Only valid for mode 2. */ + uint16_t rx_cfa_code_b; + /* Only valid for mode 2. */ + uint16_t tx_cfa_action_b; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/********************** + * hwrm_cfa_pair_free * + **********************/ + + +/* hwrm_cfa_pair_free_input (size:448b/56B) */ +struct hwrm_cfa_pair_free_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* VF Pair name (32 byte string). */ + char pair_name[32]; + /* Logical PF (0xff-PF for command channel). */ + uint8_t pf_b_id; + uint8_t unused_0[3]; + /* Logical VF number (range: 0 -> MAX_VFS -1). */ + uint16_t vf_id; + /* + * Pair mode (0-vf2fn, 1-rep2fn, 2-rep2rep, 3-proxy, 4-pfpair, + * 5-rep2fn_mod, 6-rep2fn_modall, 7-rep2fn_truflow). + */ + uint16_t pair_mode; + /* Pair between VF on local host with PF or VF on specified host. */ + #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_VF2FN UINT32_C(0x0) + /* Pair between REP on local host with PF or VF on specified host. */ + #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_REP2FN UINT32_C(0x1) + /* Pair between REP on local host with REP on specified host. */ + #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_REP2REP UINT32_C(0x2) + /* Pair for the proxy interface. */ + #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_PROXY UINT32_C(0x3) + /* Pair for the PF interface. */ + #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_PFPAIR UINT32_C(0x4) + /* Modify existing rep2fn pair and move pair to new PF. */ + #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_REP2FN_MOD UINT32_C(0x5) + /* Modify existing rep2fn pairs paired with same PF and move pairs to new PF. */ + #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_REP2FN_MODALL UINT32_C(0x6) + /* Truflow pair between REP on local host with PF or VF on specified host. */ + #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_REP2FN_TRUFLOW UINT32_C(0x7) + #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_LAST \ + HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_REP2FN_TRUFLOW +} __rte_packed; + +/* hwrm_cfa_pair_free_output (size:128b/16B) */ +struct hwrm_cfa_pair_free_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/********************** + * hwrm_cfa_pair_info * + **********************/ + + +/* hwrm_cfa_pair_info_input (size:448b/56B) */ +struct hwrm_cfa_pair_info_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + uint32_t flags; + /* If this flag is set, lookup by name else lookup by index. */ + #define HWRM_CFA_PAIR_INFO_INPUT_FLAGS_LOOKUP_TYPE UINT32_C(0x1) + /* If this flag is set, lookup by PF id and VF id. */ + #define HWRM_CFA_PAIR_INFO_INPUT_FLAGS_LOOKUP_REPRE UINT32_C(0x2) + /* Pair table index. */ + uint16_t pair_index; + /* Pair pf index. */ + uint8_t pair_pfid; + /* Pair vf index. */ + uint8_t pair_vfid; + /* Pair name (32 byte string). */ + char pair_name[32]; +} __rte_packed; + +/* hwrm_cfa_pair_info_output (size:576b/72B) */ +struct hwrm_cfa_pair_info_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* Pair table index. */ + uint16_t next_pair_index; + /* Pair member a's fid. */ + uint16_t a_fid; + /* Logical host number. */ + uint8_t host_a_index; + /* Logical PF number. */ + uint8_t pf_a_index; + /* Pair member a's Linux logical VF number. */ + uint16_t vf_a_index; + /* Rx CFA code. */ + uint16_t rx_cfa_code_a; + /* Tx CFA action. */ + uint16_t tx_cfa_action_a; + /* Pair member b's fid. */ + uint16_t b_fid; + /* Logical host number. */ + uint8_t host_b_index; + /* Logical PF number. */ + uint8_t pf_b_index; + /* Pair member a's Linux logical VF number. */ + uint16_t vf_b_index; + /* Rx CFA code. */ + uint16_t rx_cfa_code_b; + /* Tx CFA action. */ + uint16_t tx_cfa_action_b; + /* Pair mode (0-vf2fn, 1-rep2fn, 2-rep2rep, 3-proxy, 4-pfpair). */ + uint8_t pair_mode; + /* Pair between VF on local host with PF or VF on specified host. */ + #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_VF2FN UINT32_C(0x0) + /* Pair between REP on local host with PF or VF on specified host. */ + #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_REP2FN UINT32_C(0x1) + /* Pair between REP on local host with REP on specified host. */ + #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_REP2REP UINT32_C(0x2) + /* Pair for the proxy interface. */ + #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_PROXY UINT32_C(0x3) + /* Pair for the PF interface. */ + #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_PFPAIR UINT32_C(0x4) + #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_LAST \ + HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_PFPAIR + /* Pair state. */ + uint8_t pair_state; + /* Pair has been allocated */ + #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_ALLOCATED UINT32_C(0x1) + /* Both pair members are active */ + #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_ACTIVE UINT32_C(0x2) + #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_LAST \ + HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_ACTIVE + /* Pair name (32 byte string). */ + char pair_name[32]; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/********************** + * hwrm_cfa_vfr_alloc * + **********************/ + + +/* hwrm_cfa_vfr_alloc_input (size:448b/56B) */ +struct hwrm_cfa_vfr_alloc_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* Logical VF number (range: 0 -> MAX_VFS -1). */ + uint16_t vf_id; + /* + * This field is reserved for the future use. + * It shall be set to 0. + */ + uint16_t reserved; + uint8_t unused_0[4]; + /* VF Representor name (32 byte string). */ + char vfr_name[32]; +} __rte_packed; + +/* hwrm_cfa_vfr_alloc_output (size:128b/16B) */ +struct hwrm_cfa_vfr_alloc_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* Rx CFA code. */ + uint16_t rx_cfa_code; + /* Tx CFA action. */ + uint16_t tx_cfa_action; + uint8_t unused_0[3]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/********************* + * hwrm_cfa_vfr_free * + *********************/ + + +/* hwrm_cfa_vfr_free_input (size:448b/56B) */ +struct hwrm_cfa_vfr_free_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* VF Representor name (32 byte string). */ + char vfr_name[32]; + /* Logical VF number (range: 0 -> MAX_VFS -1). */ + uint16_t vf_id; + /* + * This field is reserved for the future use. + * It shall be set to 0. + */ + uint16_t reserved; + uint8_t unused_0[4]; +} __rte_packed; + +/* hwrm_cfa_vfr_free_output (size:128b/16B) */ +struct hwrm_cfa_vfr_free_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/*************************************** + * hwrm_cfa_redirect_query_tunnel_type * + ***************************************/ + + +/* hwrm_cfa_redirect_query_tunnel_type_input (size:192b/24B) */ +struct hwrm_cfa_redirect_query_tunnel_type_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -35803,108 +38647,430 @@ struct hwrm_cfa_ctx_mem_qctx_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* - * Id/Handle to the recently register context memory. This handle is passed - * to the CFA feature. - */ - uint16_t ctx_id; - uint8_t unused_0[6]; -} __rte_packed; - -/* hwrm_cfa_ctx_mem_qctx_output (size:256b/32B) */ -struct hwrm_cfa_ctx_mem_qctx_output { - /* The specific error status for the command. */ - uint16_t error_code; - /* The HWRM command request type. */ - uint16_t req_type; - /* The sequence ID from the original command. */ - uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; + /* + * Id/Handle to the recently register context memory. This handle is passed + * to the CFA feature. + */ + uint16_t ctx_id; + uint8_t unused_0[6]; +} __rte_packed; + +/* hwrm_cfa_ctx_mem_qctx_output (size:256b/32B) */ +struct hwrm_cfa_ctx_mem_qctx_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint16_t flags; + /* Counter PBL indirect levels. */ + uint8_t page_level; + /* PBL pointer is physical start address. */ + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2) + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LAST \ + HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_2 + /* Page size. */ + uint8_t page_size; + /* 4KB page size. */ + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_4K UINT32_C(0x0) + /* 8KB page size. */ + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_8K UINT32_C(0x1) + /* 64KB page size. */ + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_64K UINT32_C(0x4) + /* 256KB page size. */ + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_256K UINT32_C(0x6) + /* 1MB page size. */ + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_1M UINT32_C(0x8) + /* 2MB page size. */ + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_2M UINT32_C(0x9) + /* 4MB page size. */ + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_4M UINT32_C(0xa) + /* 1GB page size. */ + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_1G UINT32_C(0x12) + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_LAST \ + HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_1G + uint8_t unused_0[4]; + /* Pointer to the PBL, or PDL depending on number of levels */ + uint64_t page_dir; + uint8_t unused_1[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/************************** + * hwrm_cfa_ctx_mem_qcaps * + **************************/ + + +/* hwrm_cfa_ctx_mem_qcaps_input (size:128b/16B) */ +struct hwrm_cfa_ctx_mem_qcaps_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; +} __rte_packed; + +/* hwrm_cfa_ctx_mem_qcaps_output (size:128b/16B) */ +struct hwrm_cfa_ctx_mem_qcaps_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* Indicates the maximum number of context memory which can be registered. */ + uint16_t max_entries; + uint8_t unused_0[5]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/************************** + * hwrm_cfa_counter_qcaps * + **************************/ + + +/* hwrm_cfa_counter_qcaps_input (size:128b/16B) */ +struct hwrm_cfa_counter_qcaps_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; +} __rte_packed; + +/* hwrm_cfa_counter_qcaps_output (size:576b/72B) */ +struct hwrm_cfa_counter_qcaps_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint32_t flags; + /* Enumeration denoting the supported CFA counter format. */ + #define HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT \ + UINT32_C(0x1) + /* CFA counter types are not supported. */ + #define HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT_NONE \ + UINT32_C(0x0) + /* 64-bit packet counters followed by 64-bit byte counters format. */ + #define HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT_64_BIT \ + UINT32_C(0x1) + #define HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT_LAST \ + HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT_64_BIT + uint32_t unused_0; + /* + * Minimum guaranteed number of flow counters supported for this function, + * in RX direction. + */ + uint32_t min_rx_fc; + /* + * Maximum non-guaranteed number of flow counters supported for this function, + * in RX direction. + */ + uint32_t max_rx_fc; + /* + * Minimum guaranteed number of flow counters supported for this function, + * in TX direction. + */ + uint32_t min_tx_fc; + /* + * Maximum non-guaranteed number of flow counters supported for this function, + * in TX direction. + */ + uint32_t max_tx_fc; + /* + * Minimum guaranteed number of extension flow counters supported for this + * function, in RX direction. + */ + uint32_t min_rx_efc; + /* + * Maximum non-guaranteed number of extension flow counters supported for + * this function, in RX direction. + */ + uint32_t max_rx_efc; + /* + * Minimum guaranteed number of extension flow counters supported for this + * function, in TX direction. + */ + uint32_t min_tx_efc; + /* + * Maximum non-guaranteed number of extension flow counters supported for + * this function, in TX direction. + */ + uint32_t max_tx_efc; + /* + * Minimum guaranteed number of meter drop counters supported for this + * function, in RX direction. + */ + uint32_t min_rx_mdc; + /* + * Maximum non-guaranteed number of meter drop counters supported for this + * function, in RX direction. + */ + uint32_t max_rx_mdc; + /* + * Minimum guaranteed number of meter drop counters supported for this + * function, in TX direction. + */ + uint32_t min_tx_mdc; + /* + * Maximum non-guaranteed number of meter drop counters supported for this + * function, in TX direction. + */ + uint32_t max_tx_mdc; + /* Maximum guaranteed number of flow counters which can be used during flow alloc. */ + uint32_t max_flow_alloc_fc; + uint8_t unused_1[3]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/************************ + * hwrm_cfa_counter_cfg * + ************************/ + + +/* hwrm_cfa_counter_cfg_input (size:256b/32B) */ +struct hwrm_cfa_counter_cfg_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + uint16_t flags; + /* Enumeration denoting the configuration mode. */ + #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE \ + UINT32_C(0x1) + /* Disable the configuration mode. */ + #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE_DISABLE \ + UINT32_C(0x0) + /* Enable the configuration mode. */ + #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE_ENABLE \ + UINT32_C(0x1) + #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE_LAST \ + HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE_ENABLE + /* Enumeration denoting the RX, TX type of the resource. */ + #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH \ + UINT32_C(0x2) + /* Tx path. */ + #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH_TX \ + (UINT32_C(0x0) << 1) + /* Rx path. */ + #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH_RX \ + (UINT32_C(0x1) << 1) + #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH_LAST \ + HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH_RX + /* Enumeration denoting the data transfer mode. */ + #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_MASK \ + UINT32_C(0xc) + #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_SFT 2 + /* Push mode. */ + #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_PUSH \ + (UINT32_C(0x0) << 2) + /* Pull mode. */ + #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_PULL \ + (UINT32_C(0x1) << 2) + /* Pull on async update. */ + #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_PULL_ASYNC \ + (UINT32_C(0x2) << 2) + #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_LAST \ + HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_PULL_ASYNC + uint16_t counter_type; + /* Flow counters. */ + #define HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_FC UINT32_C(0x0) + /* Extended flow counters. */ + #define HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_EFC UINT32_C(0x1) + /* Meter drop counters. */ + #define HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_MDC UINT32_C(0x2) + #define HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_LAST \ + HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_MDC + /* Ctx memory handle to be used for the counter. */ + uint16_t ctx_id; + /* Counter update cadence hint (only in Push mode). */ + uint16_t update_tmr_ms; + /* Total number of entries. */ + uint32_t num_entries; + uint32_t unused_0; +} __rte_packed; + +/* hwrm_cfa_counter_cfg_output (size:128b/16B) */ +struct hwrm_cfa_counter_cfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/*************************** + * hwrm_cfa_counter_qstats * + ***************************/ + + +/* hwrm_cfa_counter_qstats_input (size:320b/40B) */ +struct hwrm_cfa_counter_qstats_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; uint16_t flags; - /* Counter PBL indirect levels. */ - uint8_t page_level; - /* PBL pointer is physical start address. */ - #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0) - /* PBL pointer points to PTE table. */ - #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1) - /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ - #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2) - #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LAST \ - HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_2 - /* Page size. */ - uint8_t page_size; - /* 4KB page size. */ - #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_4K UINT32_C(0x0) - /* 8KB page size. */ - #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_8K UINT32_C(0x1) - /* 64KB page size. */ - #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_64K UINT32_C(0x4) - /* 256KB page size. */ - #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_256K UINT32_C(0x6) - /* 1MB page size. */ - #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_1M UINT32_C(0x8) - /* 2MB page size. */ - #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_2M UINT32_C(0x9) - /* 4MB page size. */ - #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_4M UINT32_C(0xa) - /* 1GB page size. */ - #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_1G UINT32_C(0x12) - #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_LAST \ - HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_1G - uint8_t unused_0[4]; - /* Pointer to the PBL, or PDL depending on number of levels */ - uint64_t page_dir; - uint8_t unused_1[7]; - /* - * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' - * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. - */ - uint8_t valid; -} __rte_packed; - -/************************** - * hwrm_cfa_ctx_mem_qcaps * - **************************/ - - -/* hwrm_cfa_ctx_mem_qcaps_input (size:128b/16B) */ -struct hwrm_cfa_ctx_mem_qcaps_input { - /* The HWRM command request type. */ - uint16_t req_type; - /* - * The completion ring to send the completion event on. This should - * be the NQ ID returned from the `nq_alloc` HWRM command. - */ - uint16_t cmpl_ring; - /* - * The sequence ID is used by the driver for tracking multiple - * commands. This ID is treated as opaque data by the firmware and - * the value is returned in the `hwrm_resp_hdr` upon completion. - */ - uint16_t seq_id; - /* - * The target ID of the command: - * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors - * * 0xFFFD - Reserved for user-space HWRM interface - * * 0xFFFF - HWRM - */ - uint16_t target_id; - /* - * A physical address pointer pointing to a host buffer that the - * command's response data will be written. This can be either a host - * physical address (HPA) or a guest physical address (GPA) and must - * point to a physically contiguous block of memory. - */ - uint64_t resp_addr; + /* Enumeration denoting the RX, TX type of the resource. */ + #define HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH UINT32_C(0x1) + /* Tx path. */ + #define HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH_TX UINT32_C(0x0) + /* Rx path. */ + #define HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH_RX UINT32_C(0x1) + #define HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH_LAST \ + HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH_RX + uint16_t counter_type; + uint16_t input_flow_ctx_id; + uint16_t num_entries; + uint16_t delta_time_ms; + uint16_t meter_instance_id; + uint16_t mdc_ctx_id; + uint8_t unused_0[2]; + uint64_t expected_count; } __rte_packed; -/* hwrm_cfa_ctx_mem_qcaps_output (size:128b/16B) */ -struct hwrm_cfa_ctx_mem_qcaps_output { +/* hwrm_cfa_counter_qstats_output (size:128b/16B) */ +struct hwrm_cfa_counter_qstats_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -35913,9 +39079,7 @@ struct hwrm_cfa_ctx_mem_qcaps_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* Indicates the maximum number of context memory which can be registered. */ - uint16_t max_entries; - uint8_t unused_0[5]; + uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -36008,14 +39172,14 @@ struct hwrm_cfa_eem_qcaps_output { #define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_PATH_RX \ UINT32_C(0x2) /* - * When set to 1, indicates the the FW supports the Centralized + * When set to 1, indicates the FW supports the Centralized * Memory Model. The concept designates one entity for the * memory allocation while all others ‘subscribe’ to it. */ #define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_CENTRALIZED_MEMORY_MODEL_SUPPORTED \ UINT32_C(0x4) /* - * When set to 1, indicates the the FW supports the Detached + * When set to 1, indicates the FW supports the Detached * Centralized Memory Model. The memory is allocated and managed * as a separate entity. All PFs and VFs will be granted direct * or semi-direct access to the allocated memory while none of @@ -37815,6 +40979,214 @@ struct hwrm_tf_tbl_type_set_output { uint8_t valid; } __rte_packed; +/************************** + * hwrm_tf_ctxt_mem_alloc * + **************************/ + + +/* hwrm_tf_ctxt_mem_alloc_input (size:192b/24B) */ +struct hwrm_tf_ctxt_mem_alloc_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* Size in KB of memory to be allocated. */ + uint32_t mem_size; + /* unused. */ + uint32_t unused0; +} __rte_packed; + +/* hwrm_tf_ctxt_mem_alloc_output (size:192b/24B) */ +struct hwrm_tf_ctxt_mem_alloc_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* Pointer to the PBL, or PDL depending on number of levels */ + uint64_t page_dir; + /* Counter PBL indirect levels. */ + uint8_t page_level; + /* PBL pointer is physical start address. */ + #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1) + /* + * PBL pointer points to PDE table with each entry pointing + * to PTE tables. + */ + #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2) + #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_LEVEL_LAST \ + HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_LEVEL_LVL_2 + /* Page size. */ + uint8_t page_size; + /* 4KB page size. */ + #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_4K UINT32_C(0x0) + /* 8KB page size. */ + #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_8K UINT32_C(0x1) + /* 64KB page size. */ + #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_64K UINT32_C(0x4) + /* 128KB page size. */ + #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_128K UINT32_C(0x5) + /* 256KB page size. */ + #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_256K UINT32_C(0x6) + /* 512KB page size. */ + #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_512K UINT32_C(0x7) + /* 1MB page size. */ + #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_1M UINT32_C(0x8) + /* 2MB page size. */ + #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_2M UINT32_C(0x9) + /* 4MB page size. */ + #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_4M UINT32_C(0xa) + /* 8MB page size. */ + #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_8M UINT32_C(0xb) + /* 1GB page size. */ + #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_1G UINT32_C(0x12) + #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_LAST \ + HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_1G + /* unused. */ + uint8_t unused0[5]; + /* + * This field is used in Output records to indicate that the + * output is completely written to RAM. This field should be + * read as '1' to indicate that the output has been + * completely written. When writing a command completion or + * response to an internal processor, the order of writes has + * to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/************************* + * hwrm_tf_ctxt_mem_free * + *************************/ + + +/* hwrm_tf_ctxt_mem_free_input (size:256b/32B) */ +struct hwrm_tf_ctxt_mem_free_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* Pointer to the PBL, or PDL depending on number of levels */ + uint64_t page_dir; + /* Counter PBL indirect levels. */ + uint8_t page_level; + /* PBL pointer is physical start address. */ + #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1) + /* + * PBL pointer points to PDE table with each entry pointing + * to PTE tables. + */ + #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2) + #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_LEVEL_LAST \ + HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_LEVEL_LVL_2 + /* Page size. */ + uint8_t page_size; + /* 4KB page size. */ + #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_4K UINT32_C(0x0) + /* 8KB page size. */ + #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_8K UINT32_C(0x1) + /* 64KB page size. */ + #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_64K UINT32_C(0x4) + /* 128KB page size. */ + #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_128K UINT32_C(0x5) + /* 256KB page size. */ + #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_256K UINT32_C(0x6) + /* 512KB page size. */ + #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_512K UINT32_C(0x7) + /* 1MB page size. */ + #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_1M UINT32_C(0x8) + /* 2MB page size. */ + #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_2M UINT32_C(0x9) + /* 4MB page size. */ + #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_4M UINT32_C(0xa) + /* 8MB page size. */ + #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_8M UINT32_C(0xb) + /* 1GB page size. */ + #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_1G UINT32_C(0x12) + #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_LAST \ + HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_1G + /* unused. */ + uint8_t unused0[6]; +} __rte_packed; + +/* hwrm_tf_ctxt_mem_free_output (size:128b/16B) */ +struct hwrm_tf_ctxt_mem_free_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* unused. */ + uint8_t unused0[7]; + /* + * This field is used in Output records to indicate that the + * output is completely written to RAM. This field should be + * read as '1' to indicate that the output has been + * completely written. When writing a command completion or + * response to an internal processor, the order of writes has + * to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + /************************* * hwrm_tf_ctxt_mem_rgtr * *************************/ @@ -37873,14 +41245,20 @@ struct hwrm_tf_ctxt_mem_rgtr_input { #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_8K UINT32_C(0x1) /* 64KB page size. */ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_64K UINT32_C(0x4) + /* 128KB page size. */ + #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_128K UINT32_C(0x5) /* 256KB page size. */ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_256K UINT32_C(0x6) + /* 512KB page size. */ + #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_512K UINT32_C(0x7) /* 1MB page size. */ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_1M UINT32_C(0x8) /* 2MB page size. */ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_2M UINT32_C(0x9) /* 4MB page size. */ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_4M UINT32_C(0xa) + /* 8MB page size. */ + #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_8M UINT32_C(0xb) /* 1GB page size. */ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_1G UINT32_C(0x12) #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_LAST \ @@ -38041,7 +41419,7 @@ struct hwrm_tf_ext_em_qcaps_input { uint32_t unused0; } __rte_packed; -/* hwrm_tf_ext_em_qcaps_output (size:320b/40B) */ +/* hwrm_tf_ext_em_qcaps_output (size:384b/48B) */ struct hwrm_tf_ext_em_qcaps_output { /* The specific error status for the command. */ uint16_t error_code; @@ -38053,14 +41431,14 @@ struct hwrm_tf_ext_em_qcaps_output { uint16_t resp_len; uint32_t flags; /* - * When set to 1, indicates the the FW supports the Centralized + * When set to 1, indicates the FW supports the Centralized * Memory Model. The concept designates one entity for the * memory allocation while all others ‘subscribe’ to it. */ #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_FLAGS_CENTRALIZED_MEMORY_MODEL_SUPPORTED \ UINT32_C(0x1) /* - * When set to 1, indicates the the FW supports the Detached + * When set to 1, indicates the FW supports the Detached * Centralized Memory Model. The memory is allocated and managed * as a separate entity. All PFs and VFs will be granted direct * or semi-direct access to the allocated memory while none of @@ -38068,6 +41446,12 @@ struct hwrm_tf_ext_em_qcaps_output { */ #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_FLAGS_DETACHED_CENTRALIZED_MEMORY_MODEL_SUPPORTED \ UINT32_C(0x2) + /* When set to 1, indicates FW support for host based EEM memory. */ + #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_FLAGS_HOST_MEMORY_SUPPORTED \ + UINT32_C(0x4) + /* When set to 1, indicates FW support for on-chip based EEM memory. */ + #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_FLAGS_FW_MEMORY_SUPPORTED \ + UINT32_C(0x8) /* unused. */ uint32_t unused0; /* Support flags. */ @@ -38110,6 +41494,12 @@ struct hwrm_tf_ext_em_qcaps_output { */ #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_SUPPORTED_FID_TABLE \ UINT32_C(0x10) + /* + * If set to 1, then table scopes are supported. + * If set to 0, then table scopes are not supported. + */ + #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_SUPPORTED_TBL_SCOPES \ + UINT32_C(0x20) /* * The maximum number of entries supported by EXT EM. When * configuring the host memory the number of numbers of @@ -38134,8 +41524,20 @@ struct hwrm_tf_ext_em_qcaps_output { uint16_t efc_entry_size; /* The FID size in bytes of each entry in the EXT EM FID tables. */ uint16_t fid_entry_size; + /* Maximum number of ctxt mem allocations allowed. */ + uint32_t max_ctxt_mem_allocs; + /* + * Maximum number of static buckets that can be assigned to lookup + * table scopes. + */ + uint32_t max_static_buckets; + /* + * Maximum number of all (static and dynamic) buckets that can + * be assigned to lookup table scopes. + */ + uint32_t max_total_buckets; /* unused. */ - uint8_t unused1[7]; + uint8_t unused1[3]; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be @@ -38253,7 +41655,7 @@ struct hwrm_tf_ext_em_op_output { **********************/ -/* hwrm_tf_ext_em_cfg_input (size:384b/48B) */ +/* hwrm_tf_ext_em_cfg_input (size:512b/64B) */ struct hwrm_tf_ext_em_cfg_input { /* The HWRM command request type. */ uint16_t req_type; @@ -38322,8 +41724,91 @@ struct hwrm_tf_ext_em_cfg_input { * maximum value is 128M. */ uint32_t num_entries; - /* unused. */ - uint32_t unused1; + uint32_t enables; + /* + * This bit must be '1' for the group_id field to be + * configured. + */ + #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_GROUP_ID \ + UINT32_C(0x1) + /* + * This bit must be '1' for the flush_interval field to be + * configured. + */ + #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_FLUSH_INTERVAL \ + UINT32_C(0x2) + /* + * This bit must be '1' for the num_entries field to be + * configured. + */ + #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_NUM_ENTRIES \ + UINT32_C(0x4) + /* + * This bit must be '1' for the key0_ctx_id field to be + * configured. + */ + #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_KEY0_CTX_ID \ + UINT32_C(0x8) + /* + * This bit must be '1' for the key1_ctx_id field to be + * configured. + */ + #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_KEY1_CTX_ID \ + UINT32_C(0x10) + /* + * This bit must be '1' for the record_ctx_id field to be + * configured. + */ + #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_RECORD_CTX_ID \ + UINT32_C(0x20) + /* + * This bit must be '1' for the efc_ctx_id field to be + * configured. + */ + #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_EFC_CTX_ID \ + UINT32_C(0x40) + /* + * This bit must be '1' for the fid_ctx_id field to be + * configured. + */ + #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_FID_CTX_ID \ + UINT32_C(0x80) + /* + * This bit must be '1' for the action_ctx_id field to be + * configured. + */ + #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_ACTION_CTX_ID \ + UINT32_C(0x100) + /* + * This bit must be '1' for the action_tbl_scope field to be + * configured. + */ + #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_ACTION_TBL_SCOPE \ + UINT32_C(0x200) + /* + * This bit must be '1' for the lkup_ctx_id field to be + * configured. + */ + #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_LKUP_CTX_ID \ + UINT32_C(0x400) + /* + * This bit must be '1' for the lkup_tbl_scope field to be + * configured. + */ + #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_LKUP_TBL_SCOPE \ + UINT32_C(0x800) + /* + * This bit must be '1' for the lkup_static_buckets field to be + * configured. + */ + #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_LKUP_STATIC_BUCKETS \ + UINT32_C(0x1000) + /* + * This bit must be '1' for the lkup_dynamic_buckets field to be + * configured. + */ + #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_LKUP_DYNAMIC_BUCKETS \ + UINT32_C(0x2000) /* Configured EXT EM with the given context if for KEY0 table. */ uint16_t key0_ctx_id; /* Configured EXT EM with the given context if for KEY1 table. */ @@ -38334,10 +41819,25 @@ struct hwrm_tf_ext_em_cfg_input { uint16_t efc_ctx_id; /* Configured EXT EM with the given context if for EFC table. */ uint16_t fid_ctx_id; + /* Context id of action table scope. */ + uint16_t action_ctx_id; + /* Table scope id used for action record entries. */ + uint16_t action_tbl_scope; + /* Context id of lookup table scope. */ + uint16_t lkup_ctx_id; + /* Table scope id used for EM lookup entries. */ + uint16_t lkup_tbl_scope; /* unused. */ - uint16_t unused2; + uint16_t unused1; + /* + * Number of 32B static buckets to be allocated at the beginning + * of table scope. + */ + uint32_t lkup_static_buckets; + /* Number of 32B dynamic buckets to be allocated. */ + uint32_t lkup_dynamic_buckets; /* unused. */ - uint32_t unused3; + uint32_t unused2; } __rte_packed; /* hwrm_tf_ext_em_cfg_output (size:128b/16B) */ @@ -38412,7 +41912,7 @@ struct hwrm_tf_ext_em_qcfg_input { uint32_t unused0; } __rte_packed; -/* hwrm_tf_ext_em_qcfg_output (size:256b/32B) */ +/* hwrm_tf_ext_em_qcfg_output (size:448b/56B) */ struct hwrm_tf_ext_em_qcfg_output { /* The specific error status for the command. */ uint16_t error_code; @@ -38451,7 +41951,76 @@ struct hwrm_tf_ext_em_qcfg_output { /* Configured EXT EM with the given context if for EFC table. */ uint16_t fid_ctx_id; /* unused. */ - uint8_t unused0[5]; + uint16_t unused0; + uint32_t supported; + /* This bit must be '1' for the group_id field is set. */ + #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_GROUP_ID \ + UINT32_C(0x1) + /* This bit must be '1' for the flush_interval field is set. */ + #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_FLUSH_INTERVAL \ + UINT32_C(0x2) + /* This bit must be '1' for the num_entries field is set. */ + #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_NUM_ENTRIES \ + UINT32_C(0x4) + /* This bit must be '1' for the key0_ctx_id field is set. */ + #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_KEY0_CTX_ID \ + UINT32_C(0x8) + /* This bit must be '1' for the key1_ctx_id field is set. */ + #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_KEY1_CTX_ID \ + UINT32_C(0x10) + /* This bit must be '1' for the record_ctx_id field is set. */ + #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_RECORD_CTX_ID \ + UINT32_C(0x20) + /* This bit must be '1' for the efc_ctx_id field is set. */ + #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_EFC_CTX_ID \ + UINT32_C(0x40) + /* This bit must be '1' for the fid_ctx_id field is set. */ + #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_FID_CTX_ID \ + UINT32_C(0x80) + /* This bit must be '1' for the action_ctx_id field is set. */ + #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_ACTION_CTX_ID \ + UINT32_C(0x100) + /* This bit must be '1' for the action_tbl_scope field is set. */ + #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_ACTION_TBL_SCOPE \ + UINT32_C(0x200) + /* This bit must be '1' for the lkup_ctx_id field is set. */ + #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_LKUP_CTX_ID \ + UINT32_C(0x400) + /* This bit must be '1' for the lkup_tbl_scope field is set. */ + #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_LKUP_TBL_SCOPE \ + UINT32_C(0x800) + /* This bit must be '1' for the lkup_static_buckets field is set. */ + #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_LKUP_STATIC_BUCKETS \ + UINT32_C(0x1000) + /* This bit must be '1' for the lkup_dynamic_buckets field is set. */ + #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_LKUP_DYNAMIC_BUCKETS \ + UINT32_C(0x2000) + /* + * Group id is used by firmware to identify memory pools belonging + * to certain group. + */ + uint16_t group_id; + /* EEM pending cache flush interval in 1/10th of second. */ + uint8_t flush_interval; + /* unused. */ + uint8_t unused1; + /* Context id of action table scope. */ + uint16_t action_ctx_id; + /* Table scope id used for action record entries. */ + uint16_t action_tbl_scope; + /* Context id of lookup table scope. */ + uint16_t lkup_ctx_id; + /* Table scope id used for EM lookup entries. */ + uint16_t lkup_tbl_scope; + /* + * Number of 32B static buckets to be allocated at the beginning + * of table scope. + */ + uint32_t lkup_static_buckets; + /* Number of 32B dynamic buckets to be allocated. */ + uint32_t lkup_dynamic_buckets; + /* unused. */ + uint8_t unused2[3]; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be @@ -39021,111 +42590,187 @@ struct hwrm_tf_global_cfg_set_input { /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */ uint32_t fw_session_id; /* Control flags. */ - uint32_t flags; + uint32_t flags; + /* Indicates the flow direction. */ + #define HWRM_TF_GLOBAL_CFG_SET_INPUT_FLAGS_DIR UINT32_C(0x1) + /* If this bit set to 0, then it indicates rx flow. */ + #define HWRM_TF_GLOBAL_CFG_SET_INPUT_FLAGS_DIR_RX UINT32_C(0x0) + /* If this bit is set to 1, then it indicates that tx flow. */ + #define HWRM_TF_GLOBAL_CFG_SET_INPUT_FLAGS_DIR_TX UINT32_C(0x1) + #define HWRM_TF_GLOBAL_CFG_SET_INPUT_FLAGS_DIR_LAST \ + HWRM_TF_GLOBAL_CFG_SET_INPUT_FLAGS_DIR_TX + /* Global Cfg type */ + uint32_t type; + /* Offset of the type */ + uint32_t offset; + /* Size of the data to set in bytes */ + uint16_t size; + /* unused. */ + uint8_t unused0[6]; + /* Data to set */ + uint8_t data[8]; + /* Mask of data to set, 0 indicates no mask */ + uint8_t mask[8]; +} __rte_packed; + +/* hwrm_tf_global_cfg_set_output (size:128b/16B) */ +struct hwrm_tf_global_cfg_set_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* unused. */ + uint8_t unused0[7]; + /* + * This field is used in Output records to indicate that the + * output is completely written to RAM. This field should be + * read as '1' to indicate that the output has been + * completely written. When writing a command completion or + * response to an internal processor, the order of writes has + * to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/************************** + * hwrm_tf_global_cfg_get * + **************************/ + + +/* hwrm_tf_global_cfg_get_input (size:320b/40B) */ +struct hwrm_tf_global_cfg_get_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */ + uint32_t fw_session_id; + /* Control flags. */ + uint32_t flags; + /* Indicates the flow direction. */ + #define HWRM_TF_GLOBAL_CFG_GET_INPUT_FLAGS_DIR UINT32_C(0x1) + /* If this bit set to 0, then it indicates rx flow. */ + #define HWRM_TF_GLOBAL_CFG_GET_INPUT_FLAGS_DIR_RX UINT32_C(0x0) + /* If this bit is set to 1, then it indicates that tx flow. */ + #define HWRM_TF_GLOBAL_CFG_GET_INPUT_FLAGS_DIR_TX UINT32_C(0x1) + #define HWRM_TF_GLOBAL_CFG_GET_INPUT_FLAGS_DIR_LAST \ + HWRM_TF_GLOBAL_CFG_GET_INPUT_FLAGS_DIR_TX + /* Global Cfg type */ + uint32_t type; + /* Offset of the type */ + uint32_t offset; + /* Size of the data to set in bytes */ + uint16_t size; + /* unused. */ + uint8_t unused0[6]; +} __rte_packed; + +/* hwrm_tf_global_cfg_get_output (size:256b/32B) */ +struct hwrm_tf_global_cfg_get_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* Size of the data read in bytes */ + uint16_t size; + /* unused. */ + uint8_t unused0[6]; + /* Data to set */ + uint8_t data[16]; +} __rte_packed; + +/********************** + * hwrm_tf_if_tbl_get * + **********************/ + + +/* hwrm_tf_if_tbl_get_input (size:256b/32B) */ +struct hwrm_tf_if_tbl_get_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */ + uint32_t fw_session_id; + /* Control flags. */ + uint16_t flags; /* Indicates the flow direction. */ - #define HWRM_TF_GLOBAL_CFG_SET_INPUT_FLAGS_DIR UINT32_C(0x1) + #define HWRM_TF_IF_TBL_GET_INPUT_FLAGS_DIR UINT32_C(0x1) /* If this bit set to 0, then it indicates rx flow. */ - #define HWRM_TF_GLOBAL_CFG_SET_INPUT_FLAGS_DIR_RX UINT32_C(0x0) + #define HWRM_TF_IF_TBL_GET_INPUT_FLAGS_DIR_RX UINT32_C(0x0) /* If this bit is set to 1, then it indicates that tx flow. */ - #define HWRM_TF_GLOBAL_CFG_SET_INPUT_FLAGS_DIR_TX UINT32_C(0x1) - #define HWRM_TF_GLOBAL_CFG_SET_INPUT_FLAGS_DIR_LAST \ - HWRM_TF_GLOBAL_CFG_SET_INPUT_FLAGS_DIR_TX - /* Global Cfg type */ - uint32_t type; - /* Offset of the type */ - uint32_t offset; - /* Size of the data to set in bytes */ + #define HWRM_TF_IF_TBL_GET_INPUT_FLAGS_DIR_TX UINT32_C(0x1) + #define HWRM_TF_IF_TBL_GET_INPUT_FLAGS_DIR_LAST \ + HWRM_TF_IF_TBL_GET_INPUT_FLAGS_DIR_TX + /* Size of the data to set. */ uint16_t size; - /* unused. */ - uint8_t unused0[6]; - /* Data to set */ - uint8_t data[8]; - /* Mask of data to set, 0 indicates no mask */ - uint8_t mask[8]; -} __rte_packed; - -/* hwrm_tf_global_cfg_set_output (size:128b/16B) */ -struct hwrm_tf_global_cfg_set_output { - /* The specific error status for the command. */ - uint16_t error_code; - /* The HWRM command request type. */ - uint16_t req_type; - /* The sequence ID from the original command. */ - uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; - /* unused. */ - uint8_t unused0[7]; - /* - * This field is used in Output records to indicate that the - * output is completely written to RAM. This field should be - * read as '1' to indicate that the output has been - * completely written. When writing a command completion or - * response to an internal processor, the order of writes has - * to be such that this field is written last. - */ - uint8_t valid; -} __rte_packed; - -/************************** - * hwrm_tf_global_cfg_get * - **************************/ - - -/* hwrm_tf_global_cfg_get_input (size:320b/40B) */ -struct hwrm_tf_global_cfg_get_input { - /* The HWRM command request type. */ - uint16_t req_type; - /* - * The completion ring to send the completion event on. This should - * be the NQ ID returned from the `nq_alloc` HWRM command. - */ - uint16_t cmpl_ring; - /* - * The sequence ID is used by the driver for tracking multiple - * commands. This ID is treated as opaque data by the firmware and - * the value is returned in the `hwrm_resp_hdr` upon completion. - */ - uint16_t seq_id; /* - * The target ID of the command: - * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors - * * 0xFFFD - Reserved for user-space HWRM interface - * * 0xFFFF - HWRM - */ - uint16_t target_id; - /* - * A physical address pointer pointing to a host buffer that the - * command's response data will be written. This can be either a host - * physical address (HPA) or a guest physical address (GPA) and must - * point to a physically contiguous block of memory. + * Type of the resource, defined globally in the + * hwrm_tf_resc_type enum. */ - uint64_t resp_addr; - /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */ - uint32_t fw_session_id; - /* Control flags. */ - uint32_t flags; - /* Indicates the flow direction. */ - #define HWRM_TF_GLOBAL_CFG_GET_INPUT_FLAGS_DIR UINT32_C(0x1) - /* If this bit set to 0, then it indicates rx flow. */ - #define HWRM_TF_GLOBAL_CFG_GET_INPUT_FLAGS_DIR_RX UINT32_C(0x0) - /* If this bit is set to 1, then it indicates that tx flow. */ - #define HWRM_TF_GLOBAL_CFG_GET_INPUT_FLAGS_DIR_TX UINT32_C(0x1) - #define HWRM_TF_GLOBAL_CFG_GET_INPUT_FLAGS_DIR_LAST \ - HWRM_TF_GLOBAL_CFG_GET_INPUT_FLAGS_DIR_TX - /* Global Cfg type */ uint32_t type; - /* Offset of the type */ - uint32_t offset; - /* Size of the data to set in bytes */ - uint16_t size; - /* unused. */ - uint8_t unused0[6]; + /* Index of the type to retrieve. */ + uint32_t index; } __rte_packed; -/* hwrm_tf_global_cfg_get_output (size:256b/32B) */ -struct hwrm_tf_global_cfg_get_output { +/* hwrm_tf_if_tbl_get_output (size:256b/32B) */ +struct hwrm_tf_if_tbl_get_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -39134,21 +42779,34 @@ struct hwrm_tf_global_cfg_get_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* Size of the data read in bytes */ + /* Response code. */ + uint32_t resp_code; + /* Response size. */ uint16_t size; - /* unused. */ - uint8_t unused0[6]; - /* Data to set */ - uint8_t data[16]; + /* unused */ + uint16_t unused0; + /* Response data. */ + uint8_t data[8]; + /* unused */ + uint8_t unused1[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal + * processor, the order of writes has to be such that this field + * is written last. + */ + uint8_t valid; } __rte_packed; -/********************** - * hwrm_tf_if_tbl_get * - **********************/ +/*************************** + * hwrm_tf_if_tbl_type_set * + ***************************/ -/* hwrm_tf_if_tbl_get_input (size:256b/32B) */ -struct hwrm_tf_if_tbl_get_input { +/* hwrm_tf_if_tbl_set_input (size:384b/48B) */ +struct hwrm_tf_if_tbl_set_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -39182,26 +42840,32 @@ struct hwrm_tf_if_tbl_get_input { /* Control flags. */ uint16_t flags; /* Indicates the flow direction. */ - #define HWRM_TF_IF_TBL_GET_INPUT_FLAGS_DIR UINT32_C(0x1) + #define HWRM_TF_IF_TBL_SET_INPUT_FLAGS_DIR UINT32_C(0x1) /* If this bit set to 0, then it indicates rx flow. */ - #define HWRM_TF_IF_TBL_GET_INPUT_FLAGS_DIR_RX UINT32_C(0x0) + #define HWRM_TF_IF_TBL_SET_INPUT_FLAGS_DIR_RX UINT32_C(0x0) /* If this bit is set to 1, then it indicates that tx flow. */ - #define HWRM_TF_IF_TBL_GET_INPUT_FLAGS_DIR_TX UINT32_C(0x1) - #define HWRM_TF_IF_TBL_GET_INPUT_FLAGS_DIR_LAST \ - HWRM_TF_IF_TBL_GET_INPUT_FLAGS_DIR_TX - /* Size of the data to set. */ - uint16_t size; + #define HWRM_TF_IF_TBL_SET_INPUT_FLAGS_DIR_TX UINT32_C(0x1) + #define HWRM_TF_IF_TBL_SET_INPUT_FLAGS_DIR_LAST \ + HWRM_TF_IF_TBL_SET_INPUT_FLAGS_DIR_TX + /* unused. */ + uint8_t unused0[2]; /* * Type of the resource, defined globally in the * hwrm_tf_resc_type enum. */ uint32_t type; - /* Index of the type to retrieve. */ + /* Index of the type to set. */ uint32_t index; + /* Size of the data to set. */ + uint16_t size; + /* unused */ + uint8_t unused1[6]; + /* Data to be set. */ + uint8_t data[8]; } __rte_packed; -/* hwrm_tf_if_tbl_get_output (size:256b/32B) */ -struct hwrm_tf_if_tbl_get_output { +/* hwrm_tf_if_tbl_set_output (size:128b/16B) */ +struct hwrm_tf_if_tbl_set_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -39210,16 +42874,8 @@ struct hwrm_tf_if_tbl_get_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* Response code. */ - uint32_t resp_code; - /* Response size. */ - uint16_t size; - /* unused */ - uint16_t unused0; - /* Response data. */ - uint8_t data[8]; - /* unused */ - uint8_t unused1[7]; + /* unused. */ + uint8_t unused0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -39231,13 +42887,13 @@ struct hwrm_tf_if_tbl_get_output { uint8_t valid; } __rte_packed; -/*************************** - * hwrm_tf_if_tbl_type_set * - ***************************/ +/***************************** + * hwrm_tf_tbl_type_bulk_get * + *****************************/ -/* hwrm_tf_if_tbl_set_input (size:384b/48B) */ -struct hwrm_tf_if_tbl_set_input { +/* hwrm_tf_tbl_type_bulk_get_input (size:384b/48B) */ +struct hwrm_tf_tbl_type_bulk_get_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -39271,13 +42927,13 @@ struct hwrm_tf_if_tbl_set_input { /* Control flags. */ uint16_t flags; /* Indicates the flow direction. */ - #define HWRM_TF_IF_TBL_SET_INPUT_FLAGS_DIR UINT32_C(0x1) + #define HWRM_TF_TBL_TYPE_BULK_GET_INPUT_FLAGS_DIR UINT32_C(0x1) /* If this bit set to 0, then it indicates rx flow. */ - #define HWRM_TF_IF_TBL_SET_INPUT_FLAGS_DIR_RX UINT32_C(0x0) + #define HWRM_TF_TBL_TYPE_BULK_GET_INPUT_FLAGS_DIR_RX UINT32_C(0x0) /* If this bit is set to 1, then it indicates that tx flow. */ - #define HWRM_TF_IF_TBL_SET_INPUT_FLAGS_DIR_TX UINT32_C(0x1) - #define HWRM_TF_IF_TBL_SET_INPUT_FLAGS_DIR_LAST \ - HWRM_TF_IF_TBL_SET_INPUT_FLAGS_DIR_TX + #define HWRM_TF_TBL_TYPE_BULK_GET_INPUT_FLAGS_DIR_TX UINT32_C(0x1) + #define HWRM_TF_TBL_TYPE_BULK_GET_INPUT_FLAGS_DIR_LAST \ + HWRM_TF_TBL_TYPE_BULK_GET_INPUT_FLAGS_DIR_TX /* unused. */ uint8_t unused0[2]; /* @@ -39285,18 +42941,18 @@ struct hwrm_tf_if_tbl_set_input { * hwrm_tf_resc_type enum. */ uint32_t type; - /* Index of the type to set. */ - uint32_t index; - /* Size of the data to set. */ - uint16_t size; - /* unused */ - uint8_t unused1[6]; - /* Data to be set. */ - uint8_t data[8]; + /* Starting index of the type to retrieve. */ + uint32_t start_index; + /* Number of entries to retrieve. */ + uint32_t num_entries; + /* Number of entries to retrieve. */ + uint32_t unused1; + /* Host memory where data will be stored. */ + uint64_t host_addr; } __rte_packed; -/* hwrm_tf_if_tbl_set_output (size:128b/16B) */ -struct hwrm_tf_if_tbl_set_output { +/* hwrm_tf_tbl_type_bulk_get_output (size:128b/16B) */ +struct hwrm_tf_tbl_type_bulk_get_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -39305,8 +42961,12 @@ struct hwrm_tf_if_tbl_set_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* unused. */ - uint8_t unused0[7]; + /* Response code. */ + uint32_t resp_code; + /* Response size. */ + uint16_t size; + /* unused */ + uint8_t unused0; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -39652,7 +43312,7 @@ struct ctx_hw_stats { * support TPA v2, additional TPA related stats exist and can be retrieved * by DMA of ctx_hw_stats_ext, rather than legacy ctx_hw_stats structure. */ -/* ctx_hw_stats_ext (size:1344b/168B) */ +/* ctx_hw_stats_ext (size:1408b/176B) */ struct ctx_hw_stats_ext { /* Number of received unicast packets */ uint64_t rx_ucast_pkts; @@ -39696,6 +43356,8 @@ struct ctx_hw_stats_ext { uint64_t rx_tpa_bytes; /* Number of TPA errors */ uint64_t rx_tpa_errors; + /* Number of TPA events */ + uint64_t rx_tpa_events; } __rte_packed; /* Periodic Engine statistics context DMA to host. */ @@ -39971,10 +43633,10 @@ struct hwrm_stat_ctx_query_output { uint64_t tx_mcast_pkts; /* Number of transmitted broadcast packets */ uint64_t tx_bcast_pkts; - /* Number of transmitted packets with error */ - uint64_t tx_err_pkts; - /* Number of dropped packets on transmit path */ - uint64_t tx_drop_pkts; + /* Number of packets discarded in transmit path */ + uint64_t tx_discard_pkts; + /* Number of packets in transmit path with error */ + uint64_t tx_error_pkts; /* Number of transmitted bytes for unicast traffic */ uint64_t tx_ucast_bytes; /* Number of transmitted bytes for multicast traffic */ @@ -39987,10 +43649,10 @@ struct hwrm_stat_ctx_query_output { uint64_t rx_mcast_pkts; /* Number of received broadcast packets */ uint64_t rx_bcast_pkts; - /* Number of received packets with error */ - uint64_t rx_err_pkts; - /* Number of dropped packets on receive path */ - uint64_t rx_drop_pkts; + /* Number of packets discarded in receive path */ + uint64_t rx_discard_pkts; + /* Number of packets in receive path with errors */ + uint64_t rx_error_pkts; /* Number of received bytes for unicast traffic */ uint64_t rx_ucast_bytes; /* Number of received bytes for multicast traffic */ @@ -40064,7 +43726,7 @@ struct hwrm_stat_ext_ctx_query_input { uint8_t unused_0[3]; } __rte_packed; -/* hwrm_stat_ext_ctx_query_output (size:1472b/184B) */ +/* hwrm_stat_ext_ctx_query_output (size:1536b/192B) */ struct hwrm_stat_ext_ctx_query_output { /* The specific error status for the command. */ uint16_t error_code; @@ -40116,6 +43778,8 @@ struct hwrm_stat_ext_ctx_query_output { uint64_t rx_tpa_bytes; /* Number of TPA errors */ uint64_t rx_tpa_errors; + /* Number of TPA events */ + uint64_t rx_tpa_events; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output @@ -41078,7 +44742,10 @@ struct hwrm_nvm_write_input { * This is where the source data is. */ uint64_t host_src_addr; - /* The Directory Entry Type (valid values are defined in the bnxnvm_directory_type enum defined in the file bnxnvm_defs.h). */ + /* + * The Directory Entry Type (valid values are defined in the bnxnvm + * directory_type enum defined in the file bnxnvm_defs.h). + */ uint16_t dir_type; /* * Directory ordinal. @@ -41090,8 +44757,10 @@ struct hwrm_nvm_write_input { /* Directory Entry Attribute flags (see BNX_DIR_ATTR_* in the file bnxnvm_defs.h). */ uint16_t dir_attr; /* - * Length of data to write, in bytes. May be less than or equal to the allocated size for the directory entry. - * The data length stored in the directory entry will be updated to reflect this value once the write is complete. + * Length of data to write, in bytes. May be less than or equal to the allocated + * size for the directory entry. + * The data length stored in the directory entry will be updated to reflect + * this value once the write is complete. */ uint32_t dir_data_length; /* Option. */ @@ -41104,11 +44773,15 @@ struct hwrm_nvm_write_input { #define HWRM_NVM_WRITE_INPUT_FLAGS_KEEP_ORIG_ACTIVE_IMG \ UINT32_C(0x1) /* - * The requested length of the allocated NVM for the item, in bytes. This value may be greater than or equal to the specified data length (dir_data_length). + * The requested length of the allocated NVM for the item, in bytes. This + * value may be greater than or equal to the specified data length (dir_data_length). * If this value is less than the specified data length, it will be ignored. - * The response will contain the actual allocated item length, which may be greater than the requested item length. - * The purpose for allocating more than the required number of bytes for an item's data is to pre-allocate extra storage (padding) to accommodate - * the potential future growth of an item (e.g. upgraded firmware with a size increase, log growth, expanded configuration data). + * The response will contain the actual allocated item length, which may be + * greater than the requested item length. + * The purpose for allocating more than the required number of bytes for + * an item's data is to pre-allocate extra storage (padding) to accommodate + * the potential future growth of an item (e.g. upgraded firmware with a + * size increase, log growth, expanded configuration data). */ uint32_t dir_item_length; uint32_t unused_0; @@ -41125,8 +44798,11 @@ struct hwrm_nvm_write_output { /* The length of the response data in number of bytes. */ uint16_t resp_len; /* - * Length of the allocated NVM for the item, in bytes. The value may be greater than or equal to the specified data length or the requested item length. - * The actual item length used when creating a new directory entry will be a multiple of an NVM block size. + * Length of the allocated NVM for the item, in bytes. The value may be + * greater than or equal to the specified data length or the requested + * item length. + * The actual item length used when creating a new directory entry will be + * a multiple of an NVM block size. */ uint32_t dir_item_length; /* The directory index of the created or modified item. */ @@ -41451,7 +45127,7 @@ struct hwrm_nvm_get_dev_info_input { uint64_t resp_addr; } __rte_packed; -/* hwrm_nvm_get_dev_info_output (size:256b/32B) */ +/* hwrm_nvm_get_dev_info_output (size:640b/80B) */ struct hwrm_nvm_get_dev_info_output { /* The specific error status for the command. */ uint16_t error_code; @@ -41470,7 +45146,10 @@ struct hwrm_nvm_get_dev_info_output { /* Total size, in bytes of the NVRAM device. */ uint32_t nvram_size; uint32_t reserved_size; - /* Available size that can be used, in bytes. Available size is the NVRAM size take away the used size and reserved size. */ + /* + * Available size that can be used, in bytes. Available size is the + * NVRAM size take away the used size and reserved size. + */ uint32_t available_size; /* This field represents the major version of NVM cfg */ uint8_t nvm_cfg_ver_maj; @@ -41478,6 +45157,82 @@ struct hwrm_nvm_get_dev_info_output { uint8_t nvm_cfg_ver_min; /* This field represents the update version of NVM cfg */ uint8_t nvm_cfg_ver_upd; + uint8_t flags; + /* + * If set to 1, firmware will provide various firmware version + * information stored in the flash. + */ + #define HWRM_NVM_GET_DEV_INFO_OUTPUT_FLAGS_FW_VER_VALID \ + UINT32_C(0x1) + /* + * This field represents the board package name stored in the flash. + * (ASCII chars with NULL at the end). + */ + char pkg_name[16]; + /* + * This field represents the major version of HWRM firmware, stored in + * the flash. + */ + uint16_t hwrm_fw_major; + /* + * This field represents the minor version of HWRM firmware, stored in + * the flash. + */ + uint16_t hwrm_fw_minor; + /* + * This field represents the build version of HWRM firmware, stored in + * the flash. + */ + uint16_t hwrm_fw_build; + /* + * This field can be used to represent firmware branches or customer + * specific releases tied to a specific (major, minor, build) version + * of the HWRM firmware. + */ + uint16_t hwrm_fw_patch; + /* + * This field represents the major version of mgmt firmware, stored in + * the flash. + */ + uint16_t mgmt_fw_major; + /* + * This field represents the minor version of mgmt firmware, stored in + * the flash. + */ + uint16_t mgmt_fw_minor; + /* + * This field represents the build version of mgmt firmware, stored in + * the flash. + */ + uint16_t mgmt_fw_build; + /* + * This field can be used to represent firmware branches or customer + * specific releases tied to a specific (major, minor, build) version + * of the mgmt firmware. + */ + uint16_t mgmt_fw_patch; + /* + * This field represents the major version of roce firmware, stored in + * the flash. + */ + uint16_t roce_fw_major; + /* + * This field represents the minor version of roce firmware, stored in + * the flash. + */ + uint16_t roce_fw_minor; + /* + * This field represents the build version of roce firmware, stored in + * the flash. + */ + uint16_t roce_fw_build; + /* + * This field can be used to represent firmware branches or customer + * specific releases tied to a specific (major, minor, build) version + * of the roce firmware. + */ + uint16_t roce_fw_patch; + uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -41536,9 +45291,15 @@ struct hwrm_nvm_mod_dir_entry_input { * The (0-based) instance of this Directory Type. */ uint16_t dir_ordinal; - /* The Directory Entry Extension flags (see BNX_DIR_EXT_* for extension flag definitions). */ + /* + * The Directory Entry Extension flags (see BNX_DIR_EXT_* for extension + * flag definitions). + */ uint16_t dir_ext; - /* Directory Entry Attribute flags (see BNX_DIR_ATTR_* for attribute flag definitions). */ + /* + * Directory Entry Attribute flags (see BNX_DIR_ATTR_* for attribute flag + * definitions). + */ uint16_t dir_attr; /* * If valid, then this field updates the checksum @@ -41705,13 +45466,16 @@ struct hwrm_nvm_install_update_input { #define HWRM_NVM_INSTALL_UPDATE_INPUT_FLAGS_ERASE_UNUSED_SPACE \ UINT32_C(0x1) /* - * If set to 1, then unspecified images, images not in the package file, will be safely deleted. - * When combined with erase_unused_space then unspecified images will be securely erased. + * If set to 1, then unspecified images, images not in the package file, + * will be safely deleted. + * When combined with erase_unused_space then unspecified images will be + * securely erased. */ #define HWRM_NVM_INSTALL_UPDATE_INPUT_FLAGS_REMOVE_UNUSED_PKG \ UINT32_C(0x2) /* - * If set to 1, FW will defragment the NVM if defragmentation is required for the update. + * If set to 1, FW will defragment the NVM if defragmentation is required + * for the update. * Allow additional time for this command to complete if this bit is set to 1. */ #define HWRM_NVM_INSTALL_UPDATE_INPUT_FLAGS_ALLOWED_TO_DEFRAG \ @@ -42091,7 +45855,10 @@ struct hwrm_nvm_set_variable_input { /* index for the 4th dimensions */ uint16_t index_3; uint8_t flags; - /* When this bit is 1, flush internal cache after this write operation (see hwrm_nvm_flush command.) */ + /* + * When this bit is 1, flush internal cache after this write operation + * (see hwrm_nvm_flush command.) + */ #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_FORCE_FLUSH \ UINT32_C(0x1) /* encryption method */ @@ -42393,7 +46160,10 @@ struct hwrm_fw_reset_input { */ #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_HOST \ UINT32_C(0x4) - /* AP processor complex (in multi-host environment). Use host_idx to control which core is reset */ + /* + * AP processor complex (in multi-host environment). Use host_idx to + * control which core is reset + */ #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_AP \ UINT32_C(0x5) /* Reset all blocks of the chip (including all processors) */ @@ -42610,289 +46380,4 @@ struct hcomm_status { } __rte_packed; /* This is the GRC offset where the hcomm_status struct resides. */ #define HCOMM_STATUS_STRUCT_LOC 0x31001F0UL - -/************************** - * hwrm_cfa_counter_qcaps * - **************************/ - - -/* hwrm_cfa_counter_qcaps_input (size:128b/16B) */ -struct hwrm_cfa_counter_qcaps_input { - /* The HWRM command request type. */ - uint16_t req_type; - /* - * The completion ring to send the completion event on. This should - * be the NQ ID returned from the `nq_alloc` HWRM command. - */ - uint16_t cmpl_ring; - /* - * The sequence ID is used by the driver for tracking multiple - * commands. This ID is treated as opaque data by the firmware and - * the value is returned in the `hwrm_resp_hdr` upon completion. - */ - uint16_t seq_id; - /* - * The target ID of the command: - * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors - * * 0xFFFD - Reserved for user-space HWRM interface - * * 0xFFFF - HWRM - */ - uint16_t target_id; - /* - * A physical address pointer pointing to a host buffer that the - * command's response data will be written. This can be either a host - * physical address (HPA) or a guest physical address (GPA) and must - * point to a physically contiguous block of memory. - */ - uint64_t resp_addr; -} __rte_packed; - -/* hwrm_cfa_counter_qcaps_output (size:576b/72B) */ -struct hwrm_cfa_counter_qcaps_output { - /* The specific error status for the command. */ - uint16_t error_code; - /* The HWRM command request type. */ - uint16_t req_type; - /* The sequence ID from the original command. */ - uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; - uint32_t flags; - /* Enumeration denoting the supported CFA counter format. */ - #define HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT \ - UINT32_C(0x1) - /* CFA counter types are not supported. */ - #define HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT_NONE \ - UINT32_C(0x0) - /* 64-bit packet counters followed by 64-bit byte counters format. */ - #define HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT_64_BIT \ - UINT32_C(0x1) - #define HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT_LAST \ - HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT_64_BIT - uint32_t unused_0; - /* Minimum guaranteed number of flow counters supported for this function, in RX direction. */ - uint32_t min_rx_fc; - /* Maximum non-guaranteed number of flow counters supported for this function, in RX direction. */ - uint32_t max_rx_fc; - /* Minimum guaranteed number of flow counters supported for this function, in TX direction. */ - uint32_t min_tx_fc; - /* Maximum non-guaranteed number of flow counters supported for this function, in TX direction. */ - uint32_t max_tx_fc; - /* Minimum guaranteed number of extension flow counters supported for this function, in RX direction. */ - uint32_t min_rx_efc; - /* Maximum non-guaranteed number of extension flow counters supported for this function, in RX direction. */ - uint32_t max_rx_efc; - /* Minimum guaranteed number of extension flow counters supported for this function, in TX direction. */ - uint32_t min_tx_efc; - /* Maximum non-guaranteed number of extension flow counters supported for this function, in TX direction. */ - uint32_t max_tx_efc; - /* Minimum guaranteed number of meter drop counters supported for this function, in RX direction. */ - uint32_t min_rx_mdc; - /* Maximum non-guaranteed number of meter drop counters supported for this function, in RX direction. */ - uint32_t max_rx_mdc; - /* Minimum guaranteed number of meter drop counters supported for this function, in TX direction. */ - uint32_t min_tx_mdc; - /* Maximum non-guaranteed number of meter drop counters supported for this function, in TX direction. */ - uint32_t max_tx_mdc; - /* Maximum guaranteed number of flow counters which can be used during flow alloc. */ - uint32_t max_flow_alloc_fc; - uint8_t unused_1[3]; - /* - * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' - * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. - */ - uint8_t valid; -} __rte_packed; - -/************************ - * hwrm_cfa_counter_cfg * - ************************/ - - -/* hwrm_cfa_counter_cfg_input (size:256b/32B) */ -struct hwrm_cfa_counter_cfg_input { - /* The HWRM command request type. */ - uint16_t req_type; - /* - * The completion ring to send the completion event on. This should - * be the NQ ID returned from the `nq_alloc` HWRM command. - */ - uint16_t cmpl_ring; - /* - * The sequence ID is used by the driver for tracking multiple - * commands. This ID is treated as opaque data by the firmware and - * the value is returned in the `hwrm_resp_hdr` upon completion. - */ - uint16_t seq_id; - /* - * The target ID of the command: - * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors - * * 0xFFFD - Reserved for user-space HWRM interface - * * 0xFFFF - HWRM - */ - uint16_t target_id; - /* - * A physical address pointer pointing to a host buffer that the - * command's response data will be written. This can be either a host - * physical address (HPA) or a guest physical address (GPA) and must - * point to a physically contiguous block of memory. - */ - uint64_t resp_addr; - uint16_t flags; - /* Enumeration denoting the configuration mode. */ - #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE \ - UINT32_C(0x1) - /* Disable the configuration mode. */ - #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE_DISABLE \ - UINT32_C(0x0) - /* Enable the configuration mode. */ - #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE_ENABLE \ - UINT32_C(0x1) - #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE_LAST \ - HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE_ENABLE - /* Enumeration denoting the RX, TX type of the resource. */ - #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH \ - UINT32_C(0x2) - /* Tx path. */ - #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH_TX \ - (UINT32_C(0x0) << 1) - /* Rx path. */ - #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH_RX \ - (UINT32_C(0x1) << 1) - #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH_LAST \ - HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH_RX - /* Enumeration denoting the data transfer mode. */ - #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_MASK \ - UINT32_C(0xc) - #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_SFT 2 - /* Push mode. */ - #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_PUSH \ - (UINT32_C(0x0) << 2) - /* Pull mode. */ - #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_PULL \ - (UINT32_C(0x1) << 2) - /* Pull on async update. */ - #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_PULL_ASYNC \ - (UINT32_C(0x2) << 2) - #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_LAST \ - HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_PULL_ASYNC - uint16_t counter_type; - /* Flow counters. */ - #define HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_FC UINT32_C(0x0) - /* Extended flow counters. */ - #define HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_EFC UINT32_C(0x1) - /* Meter drop counters. */ - #define HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_MDC UINT32_C(0x2) - #define HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_LAST \ - HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_MDC - /* Ctx memory handle to be used for the counter. */ - uint16_t ctx_id; - /* Counter update cadence hint (only in Push mode). */ - uint16_t update_tmr_ms; - /* Total number of entries. */ - uint32_t num_entries; - uint32_t unused_0; -} __rte_packed; - -/* hwrm_cfa_counter_cfg_output (size:128b/16B) */ -struct hwrm_cfa_counter_cfg_output { - /* The specific error status for the command. */ - uint16_t error_code; - /* The HWRM command request type. */ - uint16_t req_type; - /* The sequence ID from the original command. */ - uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; - uint8_t unused_0[7]; - /* - * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' - * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. - */ - uint8_t valid; -} __rte_packed; - -/*************************** - * hwrm_cfa_counter_qstats * - ***************************/ - - -/* hwrm_cfa_counter_qstats_input (size:320b/40B) */ -struct hwrm_cfa_counter_qstats_input { - /* The HWRM command request type. */ - uint16_t req_type; - /* - * The completion ring to send the completion event on. This should - * be the NQ ID returned from the `nq_alloc` HWRM command. - */ - uint16_t cmpl_ring; - /* - * The sequence ID is used by the driver for tracking multiple - * commands. This ID is treated as opaque data by the firmware and - * the value is returned in the `hwrm_resp_hdr` upon completion. - */ - uint16_t seq_id; - /* - * The target ID of the command: - * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors - * * 0xFFFD - Reserved for user-space HWRM interface - * * 0xFFFF - HWRM - */ - uint16_t target_id; - /* - * A physical address pointer pointing to a host buffer that the - * command's response data will be written. This can be either a host - * physical address (HPA) or a guest physical address (GPA) and must - * point to a physically contiguous block of memory. - */ - uint64_t resp_addr; - uint16_t flags; - /* Enumeration denoting the RX, TX type of the resource. */ - #define HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH UINT32_C(0x1) - /* Tx path. */ - #define HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH_TX UINT32_C(0x0) - /* Rx path. */ - #define HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH_RX UINT32_C(0x1) - #define HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH_LAST \ - HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH_RX - uint16_t counter_type; - uint16_t input_flow_ctx_id; - uint16_t num_entries; - uint16_t delta_time_ms; - uint16_t meter_instance_id; - uint16_t mdc_ctx_id; - uint8_t unused_0[2]; - uint64_t expected_count; -} __rte_packed; - -/* hwrm_cfa_counter_qstats_output (size:128b/16B) */ -struct hwrm_cfa_counter_qstats_output { - /* The specific error status for the command. */ - uint16_t error_code; - /* The HWRM command request type. */ - uint16_t req_type; - /* The sequence ID from the original command. */ - uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; - uint8_t unused_0[7]; - /* - * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' - * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. - */ - uint8_t valid; -} __rte_packed; - #endif /* _HSI_STRUCT_DEF_DPDK_H_ */