X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=drivers%2Fnet%2Fbnxt%2Fhsi_struct_def_dpdk.h;h=fb4f712ce28b901dc0006b6bc33ad2bd624177ba;hb=8716f9942a408a79a114ac0496e4e7d55bc9944c;hp=e80057936fe3a0b4e49669e93211cb42e5e05904;hpb=757d6f6b4b9b4e18c2851a36943c34639e907e71;p=dpdk.git diff --git a/drivers/net/bnxt/hsi_struct_def_dpdk.h b/drivers/net/bnxt/hsi_struct_def_dpdk.h index e80057936f..fb4f712ce2 100644 --- a/drivers/net/bnxt/hsi_struct_def_dpdk.h +++ b/drivers/net/bnxt/hsi_struct_def_dpdk.h @@ -1,5 +1,5 @@ /* SPDX-License-Identifier: BSD-3-Clause - * Copyright (c) 2014-2018 Broadcom Limited + * Copyright (c) 2014-2020 Broadcom Inc. * All rights reserved. * * DO NOT MODIFY!!! This file is automatically generated. @@ -27,7 +27,8 @@ struct hwrm_cmd_hdr { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -38,7 +39,7 @@ struct hwrm_cmd_hdr { * point to a physically contiguous block of memory. */ uint64_t resp_addr; -} __attribute__((packed)); +} __rte_packed; /* This is the HWRM response header. */ /* hwrm_resp_hdr (size:64b/8B) */ @@ -51,7 +52,7 @@ struct hwrm_resp_hdr { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; -} __attribute__((packed)); +} __rte_packed; /* * TLV encapsulated message. Use the TLV type field of the @@ -68,27 +69,29 @@ struct hwrm_resp_hdr { /* RoCE slow path command */ #define TLV_TYPE_ROCE_SP_COMMAND UINT32_C(0x3) /* RoCE slow path command to query CC Gen1 support. */ -#define TLV_TYPE_QUERY_ROCE_CC_GEN1 UINT32_C(0xcommand 0x0005) +#define TLV_TYPE_QUERY_ROCE_CC_GEN1 UINT32_C(0x4) /* RoCE slow path command to modify CC Gen1 support. */ -#define TLV_TYPE_MODIFY_ROCE_CC_GEN1 UINT32_C(0xcommand 0x0005) -/* Engine CKV - The device's serial number. */ -#define TLV_TYPE_ENGINE_CKV_DEVICE_SERIAL_NUMBER UINT32_C(0x8001) -/* Engine CKV - Per-function random nonce data. */ -#define TLV_TYPE_ENGINE_CKV_NONCE UINT32_C(0x8002) +#define TLV_TYPE_MODIFY_ROCE_CC_GEN1 UINT32_C(0x5) +/* Engine CKV - The Alias key EC curve and ECC public key information. */ +#define TLV_TYPE_ENGINE_CKV_ALIAS_ECC_PUBLIC_KEY UINT32_C(0x8001) /* Engine CKV - Initialization vector. */ #define TLV_TYPE_ENGINE_CKV_IV UINT32_C(0x8003) /* Engine CKV - Authentication tag. */ #define TLV_TYPE_ENGINE_CKV_AUTH_TAG UINT32_C(0x8004) /* Engine CKV - The encrypted data. */ #define TLV_TYPE_ENGINE_CKV_CIPHERTEXT UINT32_C(0x8005) -/* Engine CKV - Supported algorithms. */ -#define TLV_TYPE_ENGINE_CKV_ALGORITHMS UINT32_C(0x8006) -/* Engine CKV - The EC curve name and ECC public key information. */ -#define TLV_TYPE_ENGINE_CKV_ECC_PUBLIC_KEY UINT32_C(0x8007) +/* Engine CKV - Supported host_algorithms. */ +#define TLV_TYPE_ENGINE_CKV_HOST_ALGORITHMS UINT32_C(0x8006) +/* Engine CKV - The Host EC curve name and ECC public key information. */ +#define TLV_TYPE_ENGINE_CKV_HOST_ECC_PUBLIC_KEY UINT32_C(0x8007) /* Engine CKV - The ECDSA signature. */ #define TLV_TYPE_ENGINE_CKV_ECDSA_SIGNATURE UINT32_C(0x8008) +/* Engine CKV - The firmware EC curve name and ECC public key information. */ +#define TLV_TYPE_ENGINE_CKV_FW_ECC_PUBLIC_KEY UINT32_C(0x8009) +/* Engine CKV - Supported firmware algorithms. */ +#define TLV_TYPE_ENGINE_CKV_FW_ALGORITHMS UINT32_C(0x800a) #define TLV_TYPE_LAST \ - TLV_TYPE_ENGINE_CKV_ECDSA_SIGNATURE + TLV_TYPE_ENGINE_CKV_FW_ALGORITHMS /* tlv (size:64b/8B) */ @@ -144,7 +147,7 @@ struct tlv { * and it must be an integer multiple of 8B. */ uint16_t length; -} __attribute__((packed)); +} __rte_packed; /* Input */ /* input (size:128b/16B) */ @@ -177,7 +180,7 @@ struct input { * and must be cleared to zero before the request is made. */ uint64_t resp_addr; -} __attribute__((packed)); +} __rte_packed; /* Output */ /* output (size:64b/8B) */ @@ -200,7 +203,7 @@ struct output { * memory. */ uint16_t resp_len; -} __attribute__((packed)); +} __rte_packed; /* Short Command Structure */ /* hwrm_short_input (size:128b/16B) */ @@ -221,8 +224,14 @@ struct hwrm_short_input { #define HWRM_SHORT_INPUT_SIGNATURE_SHORT_CMD UINT32_C(0x4321) #define HWRM_SHORT_INPUT_SIGNATURE_LAST \ HWRM_SHORT_INPUT_SIGNATURE_SHORT_CMD - /* Reserved for future use. */ - uint16_t unused_0; + /* The target ID of the command */ + uint16_t target_id; + /* Default target_id (0x0) to maintain compatibility with old driver */ + #define HWRM_SHORT_INPUT_TARGET_ID_DEFAULT UINT32_C(0x0) + /* Reserved for user-space HWRM interface */ + #define HWRM_SHORT_INPUT_TARGET_ID_TOOLS UINT32_C(0xfffd) + #define HWRM_SHORT_INPUT_TARGET_ID_LAST \ + HWRM_SHORT_INPUT_TARGET_ID_TOOLS /* This value indicates the length of the request. */ uint16_t size; /* @@ -230,7 +239,7 @@ struct hwrm_short_input { * This area must be 16B aligned. */ uint64_t req_addr; -} __attribute__((packed)); +} __rte_packed; /* * Command numbering @@ -260,6 +269,7 @@ struct cmd_nums { */ uint16_t req_type; #define HWRM_VER_GET UINT32_C(0x0) + #define HWRM_ERROR_RECOVERY_QCFG UINT32_C(0xc) #define HWRM_FUNC_DRV_IF_CHANGE UINT32_C(0xd) #define HWRM_FUNC_BUF_UNRGTR UINT32_C(0xe) #define HWRM_FUNC_VF_CFG UINT32_C(0xf) @@ -311,11 +321,8 @@ struct cmd_nums { #define HWRM_QUEUE_PRI2COS_CFG UINT32_C(0x38) #define HWRM_QUEUE_COS2BW_QCFG UINT32_C(0x39) #define HWRM_QUEUE_COS2BW_CFG UINT32_C(0x3a) - /* Experimental */ #define HWRM_QUEUE_DSCP_QCAPS UINT32_C(0x3b) - /* Experimental */ #define HWRM_QUEUE_DSCP2PRI_QCFG UINT32_C(0x3c) - /* Experimental */ #define HWRM_QUEUE_DSCP2PRI_CFG UINT32_C(0x3d) #define HWRM_VNIC_ALLOC UINT32_C(0x40) #define HWRM_VNIC_FREE UINT32_C(0x41) @@ -334,15 +341,23 @@ struct cmd_nums { #define HWRM_RING_CMPL_RING_QAGGINT_PARAMS UINT32_C(0x52) #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS UINT32_C(0x53) #define HWRM_RING_AGGINT_QCAPS UINT32_C(0x54) + #define HWRM_RING_SQ_ALLOC UINT32_C(0x55) + #define HWRM_RING_SQ_CFG UINT32_C(0x56) + #define HWRM_RING_SQ_FREE UINT32_C(0x57) #define HWRM_RING_RESET UINT32_C(0x5e) #define HWRM_RING_GRP_ALLOC UINT32_C(0x60) #define HWRM_RING_GRP_FREE UINT32_C(0x61) + #define HWRM_RING_CFG UINT32_C(0x62) + #define HWRM_RING_QCFG UINT32_C(0x63) /* Reserved for future use. */ #define HWRM_RESERVED5 UINT32_C(0x64) /* Reserved for future use. */ #define HWRM_RESERVED6 UINT32_C(0x65) #define HWRM_VNIC_RSS_COS_LB_CTX_ALLOC UINT32_C(0x70) #define HWRM_VNIC_RSS_COS_LB_CTX_FREE UINT32_C(0x71) + #define HWRM_QUEUE_MPLS_QCAPS UINT32_C(0x80) + #define HWRM_QUEUE_MPLSTC2PRI_QCFG UINT32_C(0x81) + #define HWRM_QUEUE_MPLSTC2PRI_CFG UINT32_C(0x82) #define HWRM_CFA_L2_FILTER_ALLOC UINT32_C(0x90) #define HWRM_CFA_L2_FILTER_FREE UINT32_C(0x91) #define HWRM_CFA_L2_FILTER_CFG UINT32_C(0x92) @@ -366,15 +381,26 @@ struct cmd_nums { #define HWRM_TUNNEL_DST_PORT_QUERY UINT32_C(0xa0) #define HWRM_TUNNEL_DST_PORT_ALLOC UINT32_C(0xa1) #define HWRM_TUNNEL_DST_PORT_FREE UINT32_C(0xa2) + #define HWRM_STAT_CTX_ENG_QUERY UINT32_C(0xaf) #define HWRM_STAT_CTX_ALLOC UINT32_C(0xb0) #define HWRM_STAT_CTX_FREE UINT32_C(0xb1) #define HWRM_STAT_CTX_QUERY UINT32_C(0xb2) #define HWRM_STAT_CTX_CLR_STATS UINT32_C(0xb3) #define HWRM_PORT_QSTATS_EXT UINT32_C(0xb4) + #define HWRM_PORT_PHY_MDIO_WRITE UINT32_C(0xb5) + #define HWRM_PORT_PHY_MDIO_READ UINT32_C(0xb6) + #define HWRM_PORT_PHY_MDIO_BUS_ACQUIRE UINT32_C(0xb7) + #define HWRM_PORT_PHY_MDIO_BUS_RELEASE UINT32_C(0xb8) + #define HWRM_PORT_QSTATS_EXT_PFC_WD UINT32_C(0xb9) + #define HWRM_PORT_ECN_QSTATS UINT32_C(0xba) #define HWRM_FW_RESET UINT32_C(0xc0) #define HWRM_FW_QSTATUS UINT32_C(0xc1) #define HWRM_FW_HEALTH_CHECK UINT32_C(0xc2) #define HWRM_FW_SYNC UINT32_C(0xc3) + #define HWRM_FW_STATE_QCAPS UINT32_C(0xc4) + #define HWRM_FW_STATE_QUIESCE UINT32_C(0xc5) + #define HWRM_FW_STATE_BACKUP UINT32_C(0xc6) + #define HWRM_FW_STATE_RESTORE UINT32_C(0xc7) /* Experimental */ #define HWRM_FW_SET_TIME UINT32_C(0xc8) /* Experimental */ @@ -385,17 +411,31 @@ struct cmd_nums { #define HWRM_FW_GET_STRUCTURED_DATA UINT32_C(0xcb) /* Experimental */ #define HWRM_FW_IPC_MAILBOX UINT32_C(0xcc) + #define HWRM_FW_ECN_CFG UINT32_C(0xcd) + #define HWRM_FW_ECN_QCFG UINT32_C(0xce) #define HWRM_EXEC_FWD_RESP UINT32_C(0xd0) #define HWRM_REJECT_FWD_RESP UINT32_C(0xd1) #define HWRM_FWD_RESP UINT32_C(0xd2) #define HWRM_FWD_ASYNC_EVENT_CMPL UINT32_C(0xd3) #define HWRM_OEM_CMD UINT32_C(0xd4) + /* Tells the fw to run PRBS test on a given port and lane. */ + #define HWRM_PORT_PRBS_TEST UINT32_C(0xd5) + #define HWRM_PORT_SFP_SIDEBAND_CFG UINT32_C(0xd6) + #define HWRM_PORT_SFP_SIDEBAND_QCFG UINT32_C(0xd7) + #define HWRM_FW_STATE_UNQUIESCE UINT32_C(0xd8) + /* Tells the fw to collect dsc dump on a given port and lane. */ + #define HWRM_PORT_DSC_DUMP UINT32_C(0xd9) #define HWRM_TEMP_MONITOR_QUERY UINT32_C(0xe0) + #define HWRM_REG_POWER_QUERY UINT32_C(0xe1) + #define HWRM_CORE_FREQUENCY_QUERY UINT32_C(0xe2) + #define HWRM_REG_POWER_HISTOGRAM UINT32_C(0xe3) #define HWRM_WOL_FILTER_ALLOC UINT32_C(0xf0) #define HWRM_WOL_FILTER_FREE UINT32_C(0xf1) #define HWRM_WOL_FILTER_QCFG UINT32_C(0xf2) #define HWRM_WOL_REASON_QCFG UINT32_C(0xf3) /* Experimental */ + #define HWRM_CFA_METER_QCAPS UINT32_C(0xf4) + /* Experimental */ #define HWRM_CFA_METER_PROFILE_ALLOC UINT32_C(0xf5) /* Experimental */ #define HWRM_CFA_METER_PROFILE_FREE UINT32_C(0xf6) @@ -406,6 +446,8 @@ struct cmd_nums { /* Experimental */ #define HWRM_CFA_METER_INSTANCE_FREE UINT32_C(0xf9) /* Experimental */ + #define HWRM_CFA_METER_INSTANCE_CFG UINT32_C(0xfa) + /* Experimental */ #define HWRM_CFA_VFR_ALLOC UINT32_C(0xfd) /* Experimental */ #define HWRM_CFA_VFR_FREE UINT32_C(0xfe) @@ -442,8 +484,44 @@ struct cmd_nums { #define HWRM_FW_IPC_MSG UINT32_C(0x110) #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO UINT32_C(0x111) #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE UINT32_C(0x112) - /* Engine CKV - Ping the device and SRT firmware to get the public key. */ - #define HWRM_ENGINE_CKV_HELLO UINT32_C(0x12d) + /* Experimental */ + #define HWRM_CFA_FLOW_AGING_TIMER_RESET UINT32_C(0x113) + /* Experimental */ + #define HWRM_CFA_FLOW_AGING_CFG UINT32_C(0x114) + /* Experimental */ + #define HWRM_CFA_FLOW_AGING_QCFG UINT32_C(0x115) + /* Experimental */ + #define HWRM_CFA_FLOW_AGING_QCAPS UINT32_C(0x116) + /* Experimental */ + #define HWRM_CFA_CTX_MEM_RGTR UINT32_C(0x117) + /* Experimental */ + #define HWRM_CFA_CTX_MEM_UNRGTR UINT32_C(0x118) + /* Experimental */ + #define HWRM_CFA_CTX_MEM_QCTX UINT32_C(0x119) + /* Experimental */ + #define HWRM_CFA_CTX_MEM_QCAPS UINT32_C(0x11a) + /* Experimental */ + #define HWRM_CFA_COUNTER_QCAPS UINT32_C(0x11b) + /* Experimental */ + #define HWRM_CFA_COUNTER_CFG UINT32_C(0x11c) + /* Experimental */ + #define HWRM_CFA_COUNTER_QCFG UINT32_C(0x11d) + /* Experimental */ + #define HWRM_CFA_COUNTER_QSTATS UINT32_C(0x11e) + /* Experimental */ + #define HWRM_CFA_TCP_FLAG_PROCESS_QCFG UINT32_C(0x11f) + /* Experimental */ + #define HWRM_CFA_EEM_QCAPS UINT32_C(0x120) + /* Experimental */ + #define HWRM_CFA_EEM_CFG UINT32_C(0x121) + /* Experimental */ + #define HWRM_CFA_EEM_QCFG UINT32_C(0x122) + /* Experimental */ + #define HWRM_CFA_EEM_OP UINT32_C(0x123) + /* Experimental */ + #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS UINT32_C(0x124) + /* Experimental - DEPRECATED */ + #define HWRM_CFA_TFLIB UINT32_C(0x125) /* Engine CKV - Get the current allocation status of keys provisioned in the key vault. */ #define HWRM_ENGINE_CKV_STATUS UINT32_C(0x12e) /* Engine CKV - Add a new CKEK used to encrypt keys. */ @@ -460,6 +538,10 @@ struct cmd_nums { #define HWRM_ENGINE_CKV_RNG_GET UINT32_C(0x134) /* Engine CKV - Generate and encrypt a new AES key. */ #define HWRM_ENGINE_CKV_KEY_GEN UINT32_C(0x135) + /* Engine CKV - Configure a label index with a label value. */ + #define HWRM_ENGINE_CKV_KEY_LABEL_CFG UINT32_C(0x136) + /* Engine CKV - Query a label */ + #define HWRM_ENGINE_CKV_KEY_LABEL_QCFG UINT32_C(0x137) /* Engine - Query the available queue groups configuration. */ #define HWRM_ENGINE_QG_CONFIG_QUERY UINT32_C(0x13c) /* Engine - Query the queue groups assigned to a function. */ @@ -500,6 +582,8 @@ struct cmd_nums { #define HWRM_ENGINE_STATS_CLEAR UINT32_C(0x156) /* Engine - Query the statistics accumulator for an Engine. */ #define HWRM_ENGINE_STATS_QUERY UINT32_C(0x157) + /* Engine - Query statistics counters for continuous errors from all CDDIP Engines. */ + #define HWRM_ENGINE_STATS_QUERY_CONTINUOUS_ERROR UINT32_C(0x158) /* Engine - Allocate an Engine RQ. */ #define HWRM_ENGINE_RQ_ALLOC UINT32_C(0x15e) /* Engine - Free an Engine RQ. */ @@ -514,6 +598,8 @@ struct cmd_nums { #define HWRM_ENGINE_NQ_FREE UINT32_C(0x163) /* Engine - Set the on-die RQE credit update location. */ #define HWRM_ENGINE_ON_DIE_RQE_CREDITS UINT32_C(0x164) + /* Engine - Query the engine function configuration. */ + #define HWRM_ENGINE_FUNC_QCFG UINT32_C(0x165) /* Experimental */ #define HWRM_FUNC_RESOURCE_QCAPS UINT32_C(0x190) /* Experimental */ @@ -528,6 +614,12 @@ struct cmd_nums { #define HWRM_FUNC_VF_BW_CFG UINT32_C(0x195) /* Queries the BW of any VF */ #define HWRM_FUNC_VF_BW_QCFG UINT32_C(0x196) + /* Queries pf ids belong to specified host(s) */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY UINT32_C(0x197) + /* Queries extended stats per function */ + #define HWRM_FUNC_QSTATS_EXT UINT32_C(0x198) + /* Queries extended statistics context */ + #define HWRM_STAT_EXT_CTX_QUERY UINT32_C(0x199) /* Experimental */ #define HWRM_SELFTEST_QLIST UINT32_C(0x200) /* Experimental */ @@ -539,6 +631,81 @@ struct cmd_nums { /* Experimental */ #define HWRM_PCIE_QSTATS UINT32_C(0x204) /* Experimental */ + #define HWRM_MFG_FRU_WRITE_CONTROL UINT32_C(0x205) + /* Returns the current value of a free running counter from the device. */ + #define HWRM_MFG_TIMERS_QUERY UINT32_C(0x206) + /* Experimental */ + #define HWRM_MFG_OTP_CFG UINT32_C(0x207) + /* Experimental */ + #define HWRM_MFG_OTP_QCFG UINT32_C(0x208) + /* + * Tells the fw to run the DMA read from the host and DMA write + * to the host test. + */ + #define HWRM_MFG_HDMA_TEST UINT32_C(0x209) + /* Tells the fw to program the fru memory */ + #define HWRM_MFG_FRU_EEPROM_WRITE UINT32_C(0x20a) + /* Tells the fw to read the fru memory */ + #define HWRM_MFG_FRU_EEPROM_READ UINT32_C(0x20b) + /* Experimental */ + #define HWRM_TF UINT32_C(0x2bc) + /* Experimental */ + #define HWRM_TF_VERSION_GET UINT32_C(0x2bd) + /* Experimental */ + #define HWRM_TF_SESSION_OPEN UINT32_C(0x2c6) + /* Experimental */ + #define HWRM_TF_SESSION_ATTACH UINT32_C(0x2c7) + /* Experimental */ + #define HWRM_TF_SESSION_REGISTER UINT32_C(0x2c8) + /* Experimental */ + #define HWRM_TF_SESSION_UNREGISTER UINT32_C(0x2c9) + /* Experimental */ + #define HWRM_TF_SESSION_CLOSE UINT32_C(0x2ca) + /* Experimental */ + #define HWRM_TF_SESSION_QCFG UINT32_C(0x2cb) + /* Experimental */ + #define HWRM_TF_SESSION_RESC_QCAPS UINT32_C(0x2cc) + /* Experimental */ + #define HWRM_TF_SESSION_RESC_ALLOC UINT32_C(0x2cd) + /* Experimental */ + #define HWRM_TF_SESSION_RESC_FREE UINT32_C(0x2ce) + /* Experimental */ + #define HWRM_TF_SESSION_RESC_FLUSH UINT32_C(0x2cf) + /* Experimental */ + #define HWRM_TF_TBL_TYPE_GET UINT32_C(0x2da) + /* Experimental */ + #define HWRM_TF_TBL_TYPE_SET UINT32_C(0x2db) + /* Experimental */ + #define HWRM_TF_CTXT_MEM_RGTR UINT32_C(0x2e4) + /* Experimental */ + #define HWRM_TF_CTXT_MEM_UNRGTR UINT32_C(0x2e5) + /* Experimental */ + #define HWRM_TF_EXT_EM_QCAPS UINT32_C(0x2e6) + /* Experimental */ + #define HWRM_TF_EXT_EM_OP UINT32_C(0x2e7) + /* Experimental */ + #define HWRM_TF_EXT_EM_CFG UINT32_C(0x2e8) + /* Experimental */ + #define HWRM_TF_EXT_EM_QCFG UINT32_C(0x2e9) + /* Experimental */ + #define HWRM_TF_EM_INSERT UINT32_C(0x2ea) + /* Experimental */ + #define HWRM_TF_EM_DELETE UINT32_C(0x2eb) + /* Experimental */ + #define HWRM_TF_TCAM_SET UINT32_C(0x2f8) + /* Experimental */ + #define HWRM_TF_TCAM_GET UINT32_C(0x2f9) + /* Experimental */ + #define HWRM_TF_TCAM_MOVE UINT32_C(0x2fa) + /* Experimental */ + #define HWRM_TF_TCAM_FREE UINT32_C(0x2fb) + /* Experimental */ + #define HWRM_TF_GLOBAL_CFG_SET UINT32_C(0x2fc) + /* Experimental */ + #define HWRM_TF_GLOBAL_CFG_GET UINT32_C(0x2fd) + /* Experimental */ + #define HWRM_SV UINT32_C(0x400) + /* Experimental */ #define HWRM_DBG_READ_DIRECT UINT32_C(0xff10) /* Experimental */ #define HWRM_DBG_READ_INDIRECT UINT32_C(0xff11) @@ -564,6 +731,19 @@ struct cmd_nums { /* */ #define HWRM_DBG_RING_INFO_GET UINT32_C(0xff1c) /* Experimental */ + #define HWRM_DBG_CRASHDUMP_HEADER UINT32_C(0xff1d) + /* Experimental */ + #define HWRM_DBG_CRASHDUMP_ERASE UINT32_C(0xff1e) + /* Send driver debug information to firmware */ + #define HWRM_DBG_DRV_TRACE UINT32_C(0xff1f) + /* Query debug capabilities of firmware */ + #define HWRM_DBG_QCAPS UINT32_C(0xff20) + /* Retrieve debug settings of firmware */ + #define HWRM_DBG_QCFG UINT32_C(0xff21) + /* Set destination parameters for crashdump medium */ + #define HWRM_DBG_CRASHDUMP_MEDIUM_CFG UINT32_C(0xff22) + #define HWRM_NVM_REQ_ARBITRATION UINT32_C(0xffed) + /* Experimental */ #define HWRM_NVM_FACTORY_DEFAULTS UINT32_C(0xffee) #define HWRM_NVM_VALIDATE_OPTION UINT32_C(0xffef) #define HWRM_NVM_FLUSH UINT32_C(0xfff0) @@ -584,72 +764,113 @@ struct cmd_nums { #define HWRM_NVM_RAW_WRITE_BLK UINT32_C(0xffff) #define HWRM_LAST HWRM_NVM_RAW_WRITE_BLK uint16_t unused_0[3]; -} __attribute__((packed)); +} __rte_packed; /* Return Codes */ /* ret_codes (size:64b/8B) */ struct ret_codes { uint16_t error_code; /* Request was successfully executed by the HWRM. */ - #define HWRM_ERR_CODE_SUCCESS UINT32_C(0x0) + #define HWRM_ERR_CODE_SUCCESS UINT32_C(0x0) /* The HWRM failed to execute the request. */ - #define HWRM_ERR_CODE_FAIL UINT32_C(0x1) + #define HWRM_ERR_CODE_FAIL UINT32_C(0x1) /* * The request contains invalid argument(s) or input * parameters. */ - #define HWRM_ERR_CODE_INVALID_PARAMS UINT32_C(0x2) + #define HWRM_ERR_CODE_INVALID_PARAMS UINT32_C(0x2) /* * The requester is not allowed to access the requested * resource. This error code shall be provided in a * response to a request to query or modify an existing * resource that is not accessible by the requester. */ - #define HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED UINT32_C(0x3) + #define HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED UINT32_C(0x3) /* * The HWRM is unable to allocate the requested resource. * This code only applies to requests for HWRM resource * allocations. */ - #define HWRM_ERR_CODE_RESOURCE_ALLOC_ERROR UINT32_C(0x4) + #define HWRM_ERR_CODE_RESOURCE_ALLOC_ERROR UINT32_C(0x4) /* * Invalid combination of flags is specified in the * request. */ - #define HWRM_ERR_CODE_INVALID_FLAGS UINT32_C(0x5) + #define HWRM_ERR_CODE_INVALID_FLAGS UINT32_C(0x5) /* * Invalid combination of enables fields is specified in * the request. */ - #define HWRM_ERR_CODE_INVALID_ENABLES UINT32_C(0x6) + #define HWRM_ERR_CODE_INVALID_ENABLES UINT32_C(0x6) /* * Request contains a required TLV that is not supported by * the installed version of firmware. */ - #define HWRM_ERR_CODE_UNSUPPORTED_TLV UINT32_C(0x7) + #define HWRM_ERR_CODE_UNSUPPORTED_TLV UINT32_C(0x7) /* * No firmware buffer available to accept the request. Driver * should retry the request. */ - #define HWRM_ERR_CODE_NO_BUFFER UINT32_C(0x8) + #define HWRM_ERR_CODE_NO_BUFFER UINT32_C(0x8) /* * This error code is only reported by firmware when some * sub-option of a supported HWRM command is unsupported. */ - #define HWRM_ERR_CODE_UNSUPPORTED_OPTION_ERR UINT32_C(0x9) + #define HWRM_ERR_CODE_UNSUPPORTED_OPTION_ERR UINT32_C(0x9) + /* + * This error code is only reported by firmware when the specific + * request is not able to process when the HOT reset in progress. + */ + #define HWRM_ERR_CODE_HOT_RESET_PROGRESS UINT32_C(0xa) + /* + * This error code is only reported by firmware when the registered + * driver instances are not capable of hot reset. + */ + #define HWRM_ERR_CODE_HOT_RESET_FAIL UINT32_C(0xb) + /* + * This error code is only reported by the firmware when during + * flow allocation when a request for a flow counter fails because + * the number of flow counters are exhausted. + */ + #define HWRM_ERR_CODE_NO_FLOW_COUNTER_DURING_ALLOC UINT32_C(0xc) + /* + * This error code is only reported by firmware when the registered + * driver instances requested to offloaded a flow but was unable to because + * the requested key's hash collides with the installed keys. + */ + #define HWRM_ERR_CODE_KEY_HASH_COLLISION UINT32_C(0xd) + /* + * This error code is only reported by firmware when the registered + * driver instances requested to offloaded a flow but was unable to because + * the same key has already been installed. + */ + #define HWRM_ERR_CODE_KEY_ALREADY_EXISTS UINT32_C(0xe) /* * Generic HWRM execution error that represents an * internal error. */ - #define HWRM_ERR_CODE_HWRM_ERROR UINT32_C(0xf) + #define HWRM_ERR_CODE_HWRM_ERROR UINT32_C(0xf) + /* + * Firmware is unable to service the request at the present time. Caller + * may try again later. + */ + #define HWRM_ERR_CODE_BUSY UINT32_C(0x10) + /* + * This value indicates that the HWRM response is in TLV format and + * should be interpreted as one or more TLVs starting with the + * hwrm_resp_hdr TLV. This value is not an indication of any error + * by itself, just an indication that the response should be parsed + * as TLV and the actual error code will be in the hwrm_resp_hdr TLV. + */ + #define HWRM_ERR_CODE_TLV_ENCAPSULATED_RESPONSE UINT32_C(0x8000) /* Unknown error */ - #define HWRM_ERR_CODE_UNKNOWN_ERR UINT32_C(0xfffe) + #define HWRM_ERR_CODE_UNKNOWN_ERR UINT32_C(0xfffe) /* Unsupported or invalid command */ - #define HWRM_ERR_CODE_CMD_NOT_SUPPORTED UINT32_C(0xffff) + #define HWRM_ERR_CODE_CMD_NOT_SUPPORTED UINT32_C(0xffff) #define HWRM_ERR_CODE_LAST \ HWRM_ERR_CODE_CMD_NOT_SUPPORTED uint16_t unused_0[3]; -} __attribute__((packed)); +} __rte_packed; /* Output */ /* hwrm_err_output (size:128b/16B) */ @@ -689,7 +910,7 @@ struct hwrm_err_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; /* * Following is the signature for HWRM message field that indicates not * applicable (All F's). Need to cast it the size of the field if needed. @@ -697,19 +918,32 @@ struct hwrm_err_output { #define HWRM_NA_SIGNATURE ((uint32_t)(-1)) /* hwrm_func_buf_rgtr */ #define HWRM_MAX_REQ_LEN 128 -/* hwrm_selftest_qlist */ -#define HWRM_MAX_RESP_LEN 280 +/* hwrm_cfa_flow_info */ +#define HWRM_MAX_RESP_LEN 704 /* 7 bit indirection table index. */ #define HW_HASH_INDEX_SIZE 0x80 #define HW_HASH_KEY_SIZE 40 /* valid key for HWRM response */ #define HWRM_RESP_VALID_KEY 1 +/* Reserved for BONO processor */ +#define HWRM_TARGET_ID_BONO 0xFFF8 +/* Reserved for KONG processor */ +#define HWRM_TARGET_ID_KONG 0xFFF9 +/* Reserved for APE processor */ +#define HWRM_TARGET_ID_APE 0xFFFA +/* + * This value will be used by tools for User-space HWRM Interface. + * When tool execute any HWRM command with this target_id, firmware + * will copy the response and/or data payload via register space instead + * of DMAing it. + */ +#define HWRM_TARGET_ID_TOOLS 0xFFFD #define HWRM_VERSION_MAJOR 1 -#define HWRM_VERSION_MINOR 9 -#define HWRM_VERSION_UPDATE 2 +#define HWRM_VERSION_MINOR 10 +#define HWRM_VERSION_UPDATE 1 /* non-zero means beta version */ -#define HWRM_VERSION_RSVD 53 -#define HWRM_VERSION_STR "1.9.2.53" +#define HWRM_VERSION_RSVD 48 +#define HWRM_VERSION_STR "1.10.1.48" /**************** * hwrm_ver_get * @@ -734,7 +968,8 @@ struct hwrm_ver_get_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -773,7 +1008,7 @@ struct hwrm_ver_get_input { */ uint8_t hwrm_intf_upd; uint8_t unused_0[5]; -} __attribute__((packed)); +} __rte_packed; /* hwrm_ver_get_output (size:1408b/176B) */ struct hwrm_ver_get_output { @@ -959,6 +1194,55 @@ struct hwrm_ver_get_output { */ #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_TRUSTED_VF_SUPPORTED \ UINT32_C(0x100) + /* + * If set to 1, firmware is capable to support flow aging. + * If set to 0, firmware is not capable to support flow aging. + * By default, this flag should be 0 for older version of core firmware. + */ + #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_FLOW_AGING_SUPPORTED \ + UINT32_C(0x200) + /* + * If set to 1, firmware is capable to support advanced flow counters like, + * Meter drop counters and EEM counters. + * If set to 0, firmware is not capable to support advanced flow counters. + * By default, this flag should be 0 for older version of core firmware. + */ + #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_ADV_FLOW_COUNTERS_SUPPORTED \ + UINT32_C(0x400) + /* + * If set to 1, the firmware is able to support the use of the CFA + * Extended Exact Match(EEM) feature. + * If set to 0, firmware is not capable to support the use of the + * CFA EEM feature. + * By default, this flag should be 0 for older version of core firmware. + */ + #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_CFA_EEM_SUPPORTED \ + UINT32_C(0x800) + /* + * If set to 1, the firmware is able to support advance CFA flow management + * features reported in the HWRM_CFA_FLOW_MGNT_QCAPS. + * If set to 0, then the firmware doesn’t support the advance CFA flow management + * features. + * By default, this flag should be 0 for older version of core firmware. + */ + #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_CFA_ADV_FLOW_MGNT_SUPPORTED \ + UINT32_C(0x1000) + /* + * Deprecated and replaced with cfa_truflow_supported. + * If set to 1, the firmware is able to support TFLIB features. + * If set to 0, then the firmware doesn’t support TFLIB features. + * By default, this flag should be 0 for older version of core firmware. + */ + #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_CFA_TFLIB_SUPPORTED \ + UINT32_C(0x2000) + /* + * If set to 1, the firmware is able to support TruFlow features. + * If set to 0, then the firmware doesn’t support TruFlow features. + * By default, this flag should be 0 for older version of + * core firmware. + */ + #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_CFA_TRUFLOW_SUPPORTED \ + UINT32_C(0x4000) /* * This field represents the major version of RoCE firmware. * A change in major version represents a major release. @@ -996,12 +1280,8 @@ struct hwrm_ver_get_output { * firmware (ASCII chars with NULL at the end). */ char netctrl_fw_name[16]; - /* - * This field is reserved for future use. - * The responder should set it to 0. - * The requester should ignore this field. - */ - uint8_t reserved2[16]; + /* This field represents the active board package name. */ + char active_pkg_name[16]; /* * This field represents the name of RoCE FW (ASCII chars * with NULL at the end). @@ -1047,7 +1327,13 @@ struct hwrm_ver_get_output { */ uint8_t flags; /* - * If set to 1, device is not ready. + * If set to 1, it will indicate to host drivers that firmware is + * not ready to start full blown HWRM commands. Host drivers should + * re-try HWRM_VER_GET with some timeout period. The timeout period + * can be selected up to 5 seconds. + * For Example, PCIe hot-plug: + * Hot plug timing is system dependent. It generally takes up to + * 600 miliseconds for firmware to clear DEV_NOT_RDY flag. * If set to 0, device is ready to accept all HWRM commands. */ #define HWRM_VER_GET_OUTPUT_FLAGS_DEV_NOT_RDY UINT32_C(0x1) @@ -1206,7 +1492,7 @@ struct hwrm_ver_get_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; /* bd_base (size:64b/8B) */ struct bd_base { @@ -1221,12 +1507,12 @@ struct bd_base { #define BD_BASE_TYPE_TX_BD_SHORT UINT32_C(0x0) /* * Indicates that this BD is 1BB long and is an empty - * TX BD. Not valid for use by the driver. + * TX BD. Not valid for use by the driver. */ #define BD_BASE_TYPE_TX_BD_EMPTY UINT32_C(0x1) /* * Indicates that this BD is 16B long and is an RX Producer - * (ie. empty) buffer descriptor. + * (i.e. empty) buffer descriptor. */ #define BD_BASE_TYPE_RX_PROD_PKT UINT32_C(0x4) /* @@ -1252,7 +1538,7 @@ struct bd_base { #define BD_BASE_TYPE_TX_BD_LONG_INLINE UINT32_C(0x11) #define BD_BASE_TYPE_LAST BD_BASE_TYPE_TX_BD_LONG_INLINE uint8_t unused_1[7]; -} __attribute__((packed)); +} __rte_packed; /* tx_bd_short (size:128b/16B) */ struct tx_bd_short { @@ -1280,7 +1566,7 @@ struct tx_bd_short { #define TX_BD_SHORT_FLAGS_SFT 6 /* * If set to 1, the packet ends with the data in the buffer - * pointed to by this descriptor. This flag must be + * pointed to by this descriptor. This flag must be * valid on every BD. */ #define TX_BD_SHORT_FLAGS_PACKET_END UINT32_C(0x40) @@ -1298,9 +1584,9 @@ struct tx_bd_short { * This value indicates how many 16B BD locations are consumed * in the ring by this packet. * A value of 1 indicates that this BD is the only BD (and that - * the it is a short BD). A value + * it is a short BD). A value * of 3 indicates either 3 short BDs or 1 long BD and one short - * BD in the packet. A value of 0 indicates + * BD in the packet. A value of 0 indicates * that there are 32 BD locations in the packet (the maximum). * * This field is valid only on the first BD of a packet. @@ -1361,7 +1647,7 @@ struct tx_bd_short { * This value must be valid on all BDs of a packet. */ uint64_t address; -} __attribute__((packed)); +} __rte_packed; /* tx_bd_long (size:128b/16B) */ struct tx_bd_long { @@ -1388,7 +1674,7 @@ struct tx_bd_long { #define TX_BD_LONG_FLAGS_SFT 6 /* * If set to 1, the packet ends with the data in the buffer - * pointed to by this descriptor. This flag must be + * pointed to by this descriptor. This flag must be * valid on every BD. */ #define TX_BD_LONG_FLAGS_PACKET_END UINT32_C(0x40) @@ -1406,9 +1692,9 @@ struct tx_bd_long { * This value indicates how many 16B BD locations are consumed * in the ring by this packet. * A value of 1 indicates that this BD is the only BD (and that - * the it is a short BD). A value + * it is a short BD). A value * of 3 indicates either 3 short BDs or 1 long BD and one short - * BD in the packet. A value of 0 indicates + * BD in the packet. A value of 0 indicates * that there are 32 BD locations in the packet (the maximum). * * This field is valid only on the first BD of a packet. @@ -1468,7 +1754,7 @@ struct tx_bd_long { * This value must be valid on all BDs of a packet. */ uint64_t address; -} __attribute__((packed)); +} __rte_packed; /* Last 16 bytes of tx_bd_long. */ /* tx_bd_long_hi (size:128b/16B) */ @@ -1489,7 +1775,7 @@ struct tx_bd_long_hi { */ #define TX_BD_LONG_LFLAGS_TCP_UDP_CHKSUM UINT32_C(0x1) /* - * If set to 1, the controller replaces the IP checksum of the + * If set to 1, the controller replaces the IP checksum of the * normal packets, or the inner IP checksum of the encapsulated * packets with the hardware calculated IP checksum for the * packet associated with this descriptor. @@ -1503,9 +1789,9 @@ struct tx_bd_long_hi { * * This bit must be valid on the first BD of a packet. * - * Packet must be 64B or longer when this flag is set. It is not + * Packet must be 64B or longer when this flag is set. It is not * useful to use this bit with any form of TX offload such as - * CSO or LSO. The intent is that the packet from the host already + * CSO or LSO. The intent is that the packet from the host already * has a valid Ethernet CRC on the packet. */ #define TX_BD_LONG_LFLAGS_NOCRC UINT32_C(0x4) @@ -1534,9 +1820,9 @@ struct tx_bd_long_hi { */ #define TX_BD_LONG_LFLAGS_T_IP_CHKSUM UINT32_C(0x10) /* - * If set to 1, the device will treat this packet with LSO(Large + * If set to 1, the device will treat this packet with LSO(Large * Send Offload) processing for both normal or encapsulated - * packets, which is a form of TCP segmentation. When this bit + * packets, which is a form of TCP segmentation. When this bit * is 1, the hdr_size and mss fields must be valid. The driver * doesn't need to set t_ip_chksum, ip_chksum, and tcp_udp_chksum * flags since the controller will replace the appropriate @@ -1569,19 +1855,19 @@ struct tx_bd_long_hi { #define TX_BD_LONG_LFLAGS_T_IPID UINT32_C(0x80) /* * If set to '1', then the RoCE ICRC will be appended to the - * packet. Packet must be a valid RoCE format packet. + * packet. Packet must be a valid RoCE format packet. */ #define TX_BD_LONG_LFLAGS_ROCE_CRC UINT32_C(0x100) /* * If set to '1', then the FCoE CRC will be appended to the - * packet. Packet must be a valid FCoE format packet. + * packet. Packet must be a valid FCoE format packet. */ #define TX_BD_LONG_LFLAGS_FCOE_CRC UINT32_C(0x200) uint16_t hdr_size; /* * When LSO is '1', this field must contain the offset of the * TCP payload from the beginning of the packet in as - * 16b words. In case of encapsulated/tunneling packet, this field + * 16b words. In case of encapsulated/tunneling packet, this field * contains the offset of the inner TCP payload from beginning of the * packet as 16-bit words. * @@ -1658,7 +1944,7 @@ struct tx_bd_long_hi { #define TX_BD_LONG_CFA_META_KEY_VLAN_TAG (UINT32_C(0x1) << 28) #define TX_BD_LONG_CFA_META_KEY_LAST \ TX_BD_LONG_CFA_META_KEY_VLAN_TAG -} __attribute__((packed)); +} __rte_packed; /* * This structure is used to inform the NIC of packet data that needs to be @@ -1688,7 +1974,7 @@ struct tx_bd_long_inline { #define TX_BD_LONG_INLINE_FLAGS_SFT 6 /* * If set to 1, the packet ends with the data in the buffer - * pointed to by this descriptor. This flag must be + * pointed to by this descriptor. This flag must be * valid on every BD. */ #define TX_BD_LONG_INLINE_FLAGS_PACKET_END UINT32_C(0x40) @@ -1793,12 +2079,12 @@ struct tx_bd_long_inline { #define TX_BD_LONG_INLINE_LFLAGS_T_IPID UINT32_C(0x80) /* * If set to '1', then the RoCE ICRC will be appended to the - * packet. Packet must be a valid RoCE format packet. + * packet. Packet must be a valid RoCE format packet. */ #define TX_BD_LONG_INLINE_LFLAGS_ROCE_CRC UINT32_C(0x100) /* * If set to '1', then the FCoE CRC will be appended to the - * packet. Packet must be a valid FCoE format packet. + * packet. Packet must be a valid FCoE format packet. */ #define TX_BD_LONG_INLINE_LFLAGS_FCOE_CRC UINT32_C(0x200) uint16_t unused2; @@ -1871,7 +2157,7 @@ struct tx_bd_long_inline { (UINT32_C(0x1) << 28) #define TX_BD_LONG_INLINE_CFA_META_KEY_LAST \ TX_BD_LONG_INLINE_CFA_META_KEY_VLAN_TAG -} __attribute__((packed)); +} __rte_packed; /* tx_bd_empty (size:128b/16B) */ struct tx_bd_empty { @@ -1881,7 +2167,7 @@ struct tx_bd_empty { #define TX_BD_EMPTY_TYPE_SFT 0 /* * Indicates that this BD is 1BB long and is an empty - * TX BD. Not valid for use by the driver. + * TX BD. Not valid for use by the driver. */ #define TX_BD_EMPTY_TYPE_TX_BD_EMPTY UINT32_C(0x1) #define TX_BD_EMPTY_TYPE_LAST TX_BD_EMPTY_TYPE_TX_BD_EMPTY @@ -1889,7 +2175,7 @@ struct tx_bd_empty { uint8_t unused_2; uint8_t unused_3[3]; uint8_t unused_4[8]; -} __attribute__((packed)); +} __rte_packed; /* rx_prod_pkt_bd (size:128b/16B) */ struct rx_prod_pkt_bd { @@ -1900,7 +2186,7 @@ struct rx_prod_pkt_bd { #define RX_PROD_PKT_BD_TYPE_SFT 0 /* * Indicates that this BD is 16B long and is an RX Producer - * (ie. empty) buffer descriptor. + * (i.e. empty) buffer descriptor. */ #define RX_PROD_PKT_BD_TYPE_RX_PROD_PKT UINT32_C(0x4) #define RX_PROD_PKT_BD_TYPE_LAST \ @@ -1909,7 +2195,7 @@ struct rx_prod_pkt_bd { #define RX_PROD_PKT_BD_FLAGS_SFT 6 /* * If set to 1, the packet will be placed at the address plus - * 2B. The 2 Bytes of padding will be written as zero. + * 2B. The 2 Bytes of padding will be written as zero. */ #define RX_PROD_PKT_BD_FLAGS_SOP_PAD UINT32_C(0x40) /* @@ -1919,9 +2205,9 @@ struct rx_prod_pkt_bd { #define RX_PROD_PKT_BD_FLAGS_EOP_PAD UINT32_C(0x80) /* * This value is the number of additional buffers in the ring that - * describe the buffer space to be consumed for the this packet. + * describe the buffer space to be consumed for this packet. * If the value is zero, then the packet must fit within the - * space described by this BD. If this value is 1 or more, it + * space described by this BD. If this value is 1 or more, it * indicates how many additional "buffer" BDs are in the ring * immediately following this BD to be used for the same * network packet. @@ -1944,10 +2230,10 @@ struct rx_prod_pkt_bd { uint32_t opaque; /* * This is the host physical address where data for the packet may - * by placed in host memory. + * be placed in host memory. */ uint64_t address; -} __attribute__((packed)); +} __rte_packed; /* rx_prod_bfr_bd (size:128b/16B) */ struct rx_prod_bfr_bd { @@ -1973,10 +2259,10 @@ struct rx_prod_bfr_bd { uint32_t opaque; /* * This is the host physical address where data for the packet may - * by placed in host memory. + * be placed in host memory. */ uint64_t address; -} __attribute__((packed)); +} __rte_packed; /* rx_prod_agg_bd (size:128b/16B) */ struct rx_prod_agg_bd { @@ -2012,10 +2298,10 @@ struct rx_prod_agg_bd { uint32_t opaque; /* * This is the host physical address where data for the packet may - * by placed in host memory. + * be placed in host memory. */ uint64_t address; -} __attribute__((packed)); +} __rte_packed; /* cmpl_base (size:128b/16B) */ struct cmpl_base { @@ -2023,17 +2309,46 @@ struct cmpl_base { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define CMPL_BASE_TYPE_MASK UINT32_C(0x3f) #define CMPL_BASE_TYPE_SFT 0 /* * TX L2 completion: - * Completion of TX packet. Length = 16B + * Completion of TX packet. Length = 16B */ #define CMPL_BASE_TYPE_TX_L2 UINT32_C(0x0) + /* + * NO-OP completion: + * Completion of NO-OP. Length = 16B + */ + #define CMPL_BASE_TYPE_NO_OP UINT32_C(0x1) + /* + * TX L2 coalesced completion: + * Completion of coalesced TX packet. Length = 16B + */ + #define CMPL_BASE_TYPE_TX_L2_COAL UINT32_C(0x2) + /* + * TX L2 PTP completion: + * Completion of PTP TX packet. Length = 32B + */ + #define CMPL_BASE_TYPE_TX_L2_PTP UINT32_C(0x3) + /* + * RX L2 TPA Start V2 Completion: + * Completion of and L2 RX packet. Length = 32B + * This is the new version of the RX_TPA_START completion used + * in SR2 and later chips. + */ + #define CMPL_BASE_TYPE_RX_TPA_START_V2 UINT32_C(0xd) + /* + * RX L2 V2 completion: + * Completion of and L2 RX packet. Length = 32B + * This is the new version of the RX_L2 completion used in SR2 + * and later chips. + */ + #define CMPL_BASE_TYPE_RX_L2_V2 UINT32_C(0xf) /* * RX L2 completion: * Completion of and L2 RX packet. Length = 32B @@ -2042,7 +2357,7 @@ struct cmpl_base { /* * RX Aggregation Buffer completion : * Completion of an L2 aggregation buffer in support of - * TPA, HDS, or Jumbo packet completion. Length = 16B + * TPA, HDS, or Jumbo packet completion. Length = 16B */ #define CMPL_BASE_TYPE_RX_AGG UINT32_C(0x12) /* @@ -2063,6 +2378,24 @@ struct cmpl_base { * Length = 16B */ #define CMPL_BASE_TYPE_STAT_EJECT UINT32_C(0x1a) + /* + * VEE Flush Completion: + * This completion is inserted manually by + * the Primate and processed by the VEE hardware to ensure that + * all completions on a VEE function have been processed by the + * VEE hardware before FLR process is completed. + */ + #define CMPL_BASE_TYPE_VEE_FLUSH UINT32_C(0x1c) + /* + * Mid Path Short Completion : + * Completion of a Mid Path Command. Length = 16B + */ + #define CMPL_BASE_TYPE_MID_PATH_SHORT UINT32_C(0x1e) + /* + * Mid Path Long Completion : + * Completion of a Mid Path Command. Length = 32B + */ + #define CMPL_BASE_TYPE_MID_PATH_LONG UINT32_C(0x1f) /* * HWRM Command Completion: * Completion of an HWRM command. @@ -2091,8 +2424,8 @@ struct cmpl_base { uint32_t info2; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ uint32_t info3_v; #define CMPL_BASE_V UINT32_C(0x1) @@ -2100,7 +2433,7 @@ struct cmpl_base { #define CMPL_BASE_INFO3_SFT 1 /* info4 is 32 b */ uint32_t info4; -} __attribute__((packed)); +} __rte_packed; /* tx_cmpl (size:128b/16B) */ struct tx_cmpl { @@ -2108,15 +2441,15 @@ struct tx_cmpl { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define TX_CMPL_TYPE_MASK UINT32_C(0x3f) #define TX_CMPL_TYPE_SFT 0 /* * TX L2 completion: - * Completion of TX packet. Length = 16B + * Completion of TX packet. Length = 16B */ #define TX_CMPL_TYPE_TX_L2 UINT32_C(0x0) #define TX_CMPL_TYPE_LAST TX_CMPL_TYPE_TX_L2 @@ -2124,14 +2457,14 @@ struct tx_cmpl { #define TX_CMPL_FLAGS_SFT 6 /* * When this bit is '1', it indicates a packet that has an - * error of some type. Type of error is indicated in + * error of some type. Type of error is indicated in * error_flags. */ #define TX_CMPL_FLAGS_ERROR UINT32_C(0x40) /* * When this bit is '1', it indicates that the packet completed * was transmitted using the push acceleration data provided - * by the driver. When this bit is '0', it indicates that the + * by the driver. When this bit is '0', it indicates that the * packet had not push acceleration data written or was executed * as a normal packet even though push data was provided. */ @@ -2140,205 +2473,501 @@ struct tx_cmpl { uint16_t unused_0; /* * This is a copy of the opaque field from the first TX BD of this - * transmitted packet. + * transmitted packet. Note that, if the packet was described by a short + * CSO or short CSO inline BD, then the 16-bit opaque field from the + * short CSO BD will appear in the bottom 16 bits of this field. */ uint32_t opaque; uint16_t errors_v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - #define TX_CMPL_V UINT32_C(0x1) - #define TX_CMPL_ERRORS_MASK UINT32_C(0xfffe) - #define TX_CMPL_ERRORS_SFT 1 + #define TX_CMPL_V UINT32_C(0x1) + #define TX_CMPL_ERRORS_MASK UINT32_C(0xfffe) + #define TX_CMPL_ERRORS_SFT 1 /* * This error indicates that there was some sort of problem * with the BDs for the packet. */ - #define TX_CMPL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe) - #define TX_CMPL_ERRORS_BUFFER_ERROR_SFT 1 + #define TX_CMPL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe) + #define TX_CMPL_ERRORS_BUFFER_ERROR_SFT 1 /* No error */ - #define TX_CMPL_ERRORS_BUFFER_ERROR_NO_ERROR (UINT32_C(0x0) << 1) + #define TX_CMPL_ERRORS_BUFFER_ERROR_NO_ERROR \ + (UINT32_C(0x0) << 1) /* * Bad Format: * BDs were not formatted correctly. */ - #define TX_CMPL_ERRORS_BUFFER_ERROR_BAD_FMT (UINT32_C(0x2) << 1) + #define TX_CMPL_ERRORS_BUFFER_ERROR_BAD_FMT \ + (UINT32_C(0x2) << 1) #define TX_CMPL_ERRORS_BUFFER_ERROR_LAST \ TX_CMPL_ERRORS_BUFFER_ERROR_BAD_FMT /* * When this bit is '1', it indicates that the length of - * the packet was zero. No packet was transmitted. + * the packet was zero. No packet was transmitted. */ - #define TX_CMPL_ERRORS_ZERO_LENGTH_PKT UINT32_C(0x10) + #define TX_CMPL_ERRORS_ZERO_LENGTH_PKT UINT32_C(0x10) /* * When this bit is '1', it indicates that the packet * was longer than the programmed limit in TDI. No * packet was transmitted. */ - #define TX_CMPL_ERRORS_EXCESSIVE_BD_LENGTH UINT32_C(0x20) + #define TX_CMPL_ERRORS_EXCESSIVE_BD_LENGTH UINT32_C(0x20) /* * When this bit is '1', it indicates that one or more of the * BDs associated with this packet generated a PCI error. * This probably means the address was not valid. */ - #define TX_CMPL_ERRORS_DMA_ERROR UINT32_C(0x40) + #define TX_CMPL_ERRORS_DMA_ERROR UINT32_C(0x40) /* * When this bit is '1', it indicates that the packet was longer - * than indicated by the hint. No packet was transmitted. + * than indicated by the hint. No packet was transmitted. */ - #define TX_CMPL_ERRORS_HINT_TOO_SHORT UINT32_C(0x80) + #define TX_CMPL_ERRORS_HINT_TOO_SHORT UINT32_C(0x80) /* * When this bit is '1', it indicates that the packet was * dropped due to Poison TLP error on one or more of the * TLPs in the PXP completion. */ - #define TX_CMPL_ERRORS_POISON_TLP_ERROR UINT32_C(0x100) + #define TX_CMPL_ERRORS_POISON_TLP_ERROR UINT32_C(0x100) + /* + * When this bit is '1', it indicates that the packet was dropped + * due to a transient internal error in TDC. The packet or LSO can + * be retried and may transmit successfully on a subsequent attempt. + */ + #define TX_CMPL_ERRORS_INTERNAL_ERROR UINT32_C(0x200) + /* + * When this bit is '1', it was not possible to collect a a timestamp + * for a PTP completion, in which case the timestamp_hi and + * timestamp_lo fields are invalid. When this bit is '0' for a PTP + * completion, the timestamp_hi and timestamp_lo fields are valid. + * RJRN will copy the value of this bit into the field of the same + * name in all TX completions, regardless of whether such completions + * are PTP completions or other TX completions. + */ + #define TX_CMPL_ERRORS_TIMESTAMP_INVALID_ERROR UINT32_C(0x400) /* unused2 is 16 b */ uint16_t unused_1; /* unused3 is 32 b */ uint32_t unused_2; -} __attribute__((packed)); +} __rte_packed; -/* rx_pkt_cmpl (size:128b/16B) */ -struct rx_pkt_cmpl { +/* tx_cmpl_coal (size:128b/16B) */ +struct tx_cmpl_coal { uint16_t flags_type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ - #define RX_PKT_CMPL_TYPE_MASK UINT32_C(0x3f) - #define RX_PKT_CMPL_TYPE_SFT 0 + #define TX_CMPL_COAL_TYPE_MASK UINT32_C(0x3f) + #define TX_CMPL_COAL_TYPE_SFT 0 /* - * RX L2 completion: - * Completion of and L2 RX packet. Length = 32B + * TX L2 coalesced completion: + * Completion of TX packet. Length = 16B */ - #define RX_PKT_CMPL_TYPE_RX_L2 UINT32_C(0x11) - #define RX_PKT_CMPL_TYPE_LAST RX_PKT_CMPL_TYPE_RX_L2 - #define RX_PKT_CMPL_FLAGS_MASK UINT32_C(0xffc0) - #define RX_PKT_CMPL_FLAGS_SFT 6 + #define TX_CMPL_COAL_TYPE_TX_L2_COAL UINT32_C(0x2) + #define TX_CMPL_COAL_TYPE_LAST TX_CMPL_COAL_TYPE_TX_L2_COAL + #define TX_CMPL_COAL_FLAGS_MASK UINT32_C(0xffc0) + #define TX_CMPL_COAL_FLAGS_SFT 6 /* * When this bit is '1', it indicates a packet that has an - * error of some type. Type of error is indicated in + * error of some type. Type of error is indicated in * error_flags. */ - #define RX_PKT_CMPL_FLAGS_ERROR UINT32_C(0x40) - /* This field indicates how the packet was placed in the buffer. */ - #define RX_PKT_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380) - #define RX_PKT_CMPL_FLAGS_PLACEMENT_SFT 7 + #define TX_CMPL_COAL_FLAGS_ERROR UINT32_C(0x40) /* - * Normal: - * Packet was placed using normal algorithm. + * When this bit is '1', it indicates that the packet completed + * was transmitted using the push acceleration data provided + * by the driver. When this bit is '0', it indicates that the + * packet had not push acceleration data written or was executed + * as a normal packet even though push data was provided. */ - #define RX_PKT_CMPL_FLAGS_PLACEMENT_NORMAL (UINT32_C(0x0) << 7) + #define TX_CMPL_COAL_FLAGS_PUSH UINT32_C(0x80) + /* unused1 is 16 b */ + uint16_t unused_0; /* - * Jumbo: - * Packet was placed using jumbo algorithm. + * This is a copy of the opaque field from the first TX BD of the packet + * which corresponds with the reported sq_cons_idx. Note that, with + * coalesced completions, completions are generated for only some of the + * packets. The driver will see the opaque field for only those packets. + * Note that, if the packet was described by a short CSO or short CSO + * inline BD, then the 16-bit opaque field from the short CSO BD will + * appear in the bottom 16 bits of this field. For TX rings with + * completion coalescing enabled (which would use the coalesced + * completion record), it is suggested that the driver populate the + * opaque field to indicate the specific TX ring with which the + * completion is associated, then utilize the opaque and sq_cons_idx + * fields in the coalesced completion record to determine the specific + * packets that are to be completed on that ring. */ - #define RX_PKT_CMPL_FLAGS_PLACEMENT_JUMBO (UINT32_C(0x1) << 7) + uint32_t opaque; + uint16_t errors_v; /* - * Header/Data Separation: - * Packet was placed using Header/Data separation algorithm. - * The separation location is indicated by the itype field. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - #define RX_PKT_CMPL_FLAGS_PLACEMENT_HDS (UINT32_C(0x2) << 7) - #define RX_PKT_CMPL_FLAGS_PLACEMENT_LAST \ - RX_PKT_CMPL_FLAGS_PLACEMENT_HDS - /* This bit is '1' if the RSS field in this completion is valid. */ - #define RX_PKT_CMPL_FLAGS_RSS_VALID UINT32_C(0x400) - /* unused is 1 b */ - #define RX_PKT_CMPL_FLAGS_UNUSED UINT32_C(0x800) + #define TX_CMPL_COAL_V UINT32_C(0x1) + #define TX_CMPL_COAL_ERRORS_MASK \ + UINT32_C(0xfffe) + #define TX_CMPL_COAL_ERRORS_SFT 1 /* - * This value indicates what the inner packet determined for the - * packet was. + * This error indicates that there was some sort of problem + * with the BDs for the packet. */ - #define RX_PKT_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000) - #define RX_PKT_CMPL_FLAGS_ITYPE_SFT 12 + #define TX_CMPL_COAL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe) + #define TX_CMPL_COAL_ERRORS_BUFFER_ERROR_SFT 1 + /* No error */ + #define TX_CMPL_COAL_ERRORS_BUFFER_ERROR_NO_ERROR \ + (UINT32_C(0x0) << 1) /* - * Not Known: - * Indicates that the packet type was not known. + * Bad Format: + * BDs were not formatted correctly. */ - #define RX_PKT_CMPL_FLAGS_ITYPE_NOT_KNOWN \ - (UINT32_C(0x0) << 12) + #define TX_CMPL_COAL_ERRORS_BUFFER_ERROR_BAD_FMT \ + (UINT32_C(0x2) << 1) + #define TX_CMPL_COAL_ERRORS_BUFFER_ERROR_LAST \ + TX_CMPL_COAL_ERRORS_BUFFER_ERROR_BAD_FMT /* - * IP Packet: - * Indicates that the packet was an IP packet, but further - * classification was not possible. + * When this bit is '1', it indicates that the length of + * the packet was zero. No packet was transmitted. */ - #define RX_PKT_CMPL_FLAGS_ITYPE_IP \ - (UINT32_C(0x1) << 12) + #define TX_CMPL_COAL_ERRORS_ZERO_LENGTH_PKT UINT32_C(0x10) /* - * TCP Packet: - * Indicates that the packet was IP and TCP. - * This indicates that the payload_offset field is valid. + * When this bit is '1', it indicates that the packet + * was longer than the programmed limit in TDI. No + * packet was transmitted. */ - #define RX_PKT_CMPL_FLAGS_ITYPE_TCP \ - (UINT32_C(0x2) << 12) + #define TX_CMPL_COAL_ERRORS_EXCESSIVE_BD_LENGTH UINT32_C(0x20) /* - * UDP Packet: - * Indicates that the packet was IP and UDP. - * This indicates that the payload_offset field is valid. + * When this bit is '1', it indicates that one or more of the + * BDs associated with this packet generated a PCI error. + * This probably means the address was not valid. */ - #define RX_PKT_CMPL_FLAGS_ITYPE_UDP \ - (UINT32_C(0x3) << 12) + #define TX_CMPL_COAL_ERRORS_DMA_ERROR UINT32_C(0x40) /* - * FCoE Packet: - * Indicates that the packet was recognized as a FCoE. - * This also indicates that the payload_offset field is valid. + * When this bit is '1', it indicates that the packet was longer + * than indicated by the hint. No packet was transmitted. */ - #define RX_PKT_CMPL_FLAGS_ITYPE_FCOE \ - (UINT32_C(0x4) << 12) + #define TX_CMPL_COAL_ERRORS_HINT_TOO_SHORT UINT32_C(0x80) /* - * RoCE Packet: - * Indicates that the packet was recognized as a RoCE. - * This also indicates that the payload_offset field is valid. + * When this bit is '1', it indicates that the packet was + * dropped due to Poison TLP error on one or more of the + * TLPs in the PXP completion. */ - #define RX_PKT_CMPL_FLAGS_ITYPE_ROCE \ - (UINT32_C(0x5) << 12) + #define TX_CMPL_COAL_ERRORS_POISON_TLP_ERROR \ + UINT32_C(0x100) /* - * ICMP Packet: - * Indicates that the packet was recognized as ICMP. - * This indicates that the payload_offset field is valid. + * When this bit is '1', it indicates that the packet was dropped + * due to a transient internal error in TDC. The packet or LSO can + * be retried and may transmit successfully on a subsequent attempt. */ - #define RX_PKT_CMPL_FLAGS_ITYPE_ICMP \ - (UINT32_C(0x7) << 12) + #define TX_CMPL_COAL_ERRORS_INTERNAL_ERROR \ + UINT32_C(0x200) /* - * PtP packet wo/timestamp: - * Indicates that the packet was recognized as a PtP - * packet. + * When this bit is '1', it was not possible to collect a a timestamp + * for a PTP completion, in which case the timestamp_hi and + * timestamp_lo fields are invalid. When this bit is '0' for a PTP + * completion, the timestamp_hi and timestamp_lo fields are valid. + * RJRN will copy the value of this bit into the field of the same + * name in all TX completions, regardless of whether such + * completions are PTP completions or other TX completions. */ - #define RX_PKT_CMPL_FLAGS_ITYPE_PTP_WO_TIMESTAMP \ - (UINT32_C(0x8) << 12) + #define TX_CMPL_COAL_ERRORS_TIMESTAMP_INVALID_ERROR \ + UINT32_C(0x400) + /* unused2 is 16 b */ + uint16_t unused_1; + uint32_t sq_cons_idx; /* - * PtP packet w/timestamp: - * Indicates that the packet was recognized as a PtP - * packet and that a timestamp was taken for the packet. + * This value is SQ index for the start of the packet following the + * last completed packet. */ - #define RX_PKT_CMPL_FLAGS_ITYPE_PTP_W_TIMESTAMP \ - (UINT32_C(0x9) << 12) - #define RX_PKT_CMPL_FLAGS_ITYPE_LAST \ - RX_PKT_CMPL_FLAGS_ITYPE_PTP_W_TIMESTAMP + #define TX_CMPL_COAL_SQ_CONS_IDX_MASK UINT32_C(0xffffff) + #define TX_CMPL_COAL_SQ_CONS_IDX_SFT 0 +} __rte_packed; + +/* tx_cmpl_ptp (size:128b/16B) */ +struct tx_cmpl_ptp { + uint16_t flags_type; /* - * This is the length of the data for the packet stored in the - * buffer(s) identified by the opaque value. This includes - * the packet BD and any associated buffer BDs. This does not include - * the the length of any data places in aggregation BDs. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - uint16_t len; + #define TX_CMPL_PTP_TYPE_MASK UINT32_C(0x3f) + #define TX_CMPL_PTP_TYPE_SFT 0 /* - * This is a copy of the opaque field from the RX BD this completion - * corresponds to. + * TX L2 PTP completion: + * Completion of TX packet. Length = 32B */ - uint32_t opaque; - uint8_t agg_bufs_v1; + #define TX_CMPL_PTP_TYPE_TX_L2_PTP UINT32_C(0x2) + #define TX_CMPL_PTP_TYPE_LAST TX_CMPL_PTP_TYPE_TX_L2_PTP + #define TX_CMPL_PTP_FLAGS_MASK UINT32_C(0xffc0) + #define TX_CMPL_PTP_FLAGS_SFT 6 + /* + * When this bit is '1', it indicates a packet that has an + * error of some type. Type of error is indicated in + * error_flags. + */ + #define TX_CMPL_PTP_FLAGS_ERROR UINT32_C(0x40) + /* + * When this bit is '1', it indicates that the packet completed + * was transmitted using the push acceleration data provided + * by the driver. When this bit is '0', it indicates that the + * packet had not push acceleration data written or was executed + * as a normal packet even though push data was provided. + */ + #define TX_CMPL_PTP_FLAGS_PUSH UINT32_C(0x80) + /* unused1 is 16 b */ + uint16_t unused_0; + /* + * This is a copy of the opaque field from the first TX BD of this + * transmitted packet. Note that, if the packet was described by a short + * CSO or short CSO inline BD, then the 16-bit opaque field from the + * short CSO BD will appear in the bottom 16 bits of this field. + */ + uint32_t opaque; + uint16_t errors_v; + /* + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. + */ + #define TX_CMPL_PTP_V UINT32_C(0x1) + #define TX_CMPL_PTP_ERRORS_MASK UINT32_C(0xfffe) + #define TX_CMPL_PTP_ERRORS_SFT 1 + /* + * This error indicates that there was some sort of problem + * with the BDs for the packet. + */ + #define TX_CMPL_PTP_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe) + #define TX_CMPL_PTP_ERRORS_BUFFER_ERROR_SFT 1 + /* No error */ + #define TX_CMPL_PTP_ERRORS_BUFFER_ERROR_NO_ERROR \ + (UINT32_C(0x0) << 1) + /* + * Bad Format: + * BDs were not formatted correctly. + */ + #define TX_CMPL_PTP_ERRORS_BUFFER_ERROR_BAD_FMT \ + (UINT32_C(0x2) << 1) + #define TX_CMPL_PTP_ERRORS_BUFFER_ERROR_LAST \ + TX_CMPL_PTP_ERRORS_BUFFER_ERROR_BAD_FMT + /* + * When this bit is '1', it indicates that the length of + * the packet was zero. No packet was transmitted. + */ + #define TX_CMPL_PTP_ERRORS_ZERO_LENGTH_PKT UINT32_C(0x10) + /* + * When this bit is '1', it indicates that the packet + * was longer than the programmed limit in TDI. No + * packet was transmitted. + */ + #define TX_CMPL_PTP_ERRORS_EXCESSIVE_BD_LENGTH UINT32_C(0x20) + /* + * When this bit is '1', it indicates that one or more of the + * BDs associated with this packet generated a PCI error. + * This probably means the address was not valid. + */ + #define TX_CMPL_PTP_ERRORS_DMA_ERROR UINT32_C(0x40) + /* + * When this bit is '1', it indicates that the packet was longer + * than indicated by the hint. No packet was transmitted. + */ + #define TX_CMPL_PTP_ERRORS_HINT_TOO_SHORT UINT32_C(0x80) + /* + * When this bit is '1', it indicates that the packet was + * dropped due to Poison TLP error on one or more of the + * TLPs in the PXP completion. + */ + #define TX_CMPL_PTP_ERRORS_POISON_TLP_ERROR UINT32_C(0x100) + /* + * When this bit is '1', it indicates that the packet was dropped due + * to a transient internal error in TDC. The packet or LSO can be + * retried and may transmit successfully on a subsequent attempt. + */ + #define TX_CMPL_PTP_ERRORS_INTERNAL_ERROR UINT32_C(0x200) + /* + * When this bit is '1', it was not possible to collect a a timestamp + * for a PTP completion, in which case the timestamp_hi and + * timestamp_lo fields are invalid. When this bit is '0' for a PTP + * completion, the timestamp_hi and timestamp_lo fields are valid. + * RJRN will copy the value of this bit into the field of the same + * name in all TX completions, regardless of whether such + * completions are PTP completions or other TX completions. + */ + #define TX_CMPL_PTP_ERRORS_TIMESTAMP_INVALID_ERROR UINT32_C(0x400) + /* unused2 is 16 b */ + uint16_t unused_1; + /* + * This is timestamp value (lower 32bits) read from PM for the PTP + * timestamp enabled packet. + */ + uint32_t timestamp_lo; +} __rte_packed; + +/* tx_cmpl_ptp_hi (size:128b/16B) */ +struct tx_cmpl_ptp_hi { + /* + * This is timestamp value (lower 32bits) read from PM for the PTP + * timestamp enabled packet. + */ + uint16_t timestamp_hi[3]; + uint16_t reserved16; + uint64_t v2; + /* + * This value is written by the NIC such that it will be different for + * each pass through the completion queue.The even passes will write 1. + * The odd passes will write 0 + */ + #define TX_CMPL_PTP_HI_V2 UINT32_C(0x1) +} __rte_packed; + +/* rx_pkt_cmpl (size:128b/16B) */ +struct rx_pkt_cmpl { + uint16_t flags_type; + /* + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. + */ + #define RX_PKT_CMPL_TYPE_MASK UINT32_C(0x3f) + #define RX_PKT_CMPL_TYPE_SFT 0 + /* + * RX L2 completion: + * Completion of and L2 RX packet. Length = 32B + */ + #define RX_PKT_CMPL_TYPE_RX_L2 UINT32_C(0x11) + #define RX_PKT_CMPL_TYPE_LAST RX_PKT_CMPL_TYPE_RX_L2 + #define RX_PKT_CMPL_FLAGS_MASK UINT32_C(0xffc0) + #define RX_PKT_CMPL_FLAGS_SFT 6 + /* + * When this bit is '1', it indicates a packet that has an + * error of some type. Type of error is indicated in + * error_flags. + */ + #define RX_PKT_CMPL_FLAGS_ERROR UINT32_C(0x40) + /* This field indicates how the packet was placed in the buffer. */ + #define RX_PKT_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380) + #define RX_PKT_CMPL_FLAGS_PLACEMENT_SFT 7 + /* + * Normal: + * Packet was placed using normal algorithm. + */ + #define RX_PKT_CMPL_FLAGS_PLACEMENT_NORMAL (UINT32_C(0x0) << 7) + /* + * Jumbo: + * Packet was placed using jumbo algorithm. + */ + #define RX_PKT_CMPL_FLAGS_PLACEMENT_JUMBO (UINT32_C(0x1) << 7) + /* + * Header/Data Separation: + * Packet was placed using Header/Data separation algorithm. + * The separation location is indicated by the itype field. + */ + #define RX_PKT_CMPL_FLAGS_PLACEMENT_HDS (UINT32_C(0x2) << 7) + #define RX_PKT_CMPL_FLAGS_PLACEMENT_LAST \ + RX_PKT_CMPL_FLAGS_PLACEMENT_HDS + /* This bit is '1' if the RSS field in this completion is valid. */ + #define RX_PKT_CMPL_FLAGS_RSS_VALID UINT32_C(0x400) + /* unused is 1 b */ + #define RX_PKT_CMPL_FLAGS_UNUSED UINT32_C(0x800) + /* + * This value indicates what the inner packet determined for the + * packet was. + */ + #define RX_PKT_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000) + #define RX_PKT_CMPL_FLAGS_ITYPE_SFT 12 + /* + * Not Known: + * Indicates that the packet type was not known. + */ + #define RX_PKT_CMPL_FLAGS_ITYPE_NOT_KNOWN \ + (UINT32_C(0x0) << 12) + /* + * IP Packet: + * Indicates that the packet was an IP packet, but further + * classification was not possible. + */ + #define RX_PKT_CMPL_FLAGS_ITYPE_IP \ + (UINT32_C(0x1) << 12) + /* + * TCP Packet: + * Indicates that the packet was IP and TCP. + * This indicates that the payload_offset field is valid. + */ + #define RX_PKT_CMPL_FLAGS_ITYPE_TCP \ + (UINT32_C(0x2) << 12) + /* + * UDP Packet: + * Indicates that the packet was IP and UDP. + * This indicates that the payload_offset field is valid. + */ + #define RX_PKT_CMPL_FLAGS_ITYPE_UDP \ + (UINT32_C(0x3) << 12) + /* + * FCoE Packet: + * Indicates that the packet was recognized as a FCoE. + * This also indicates that the payload_offset field is valid. + */ + #define RX_PKT_CMPL_FLAGS_ITYPE_FCOE \ + (UINT32_C(0x4) << 12) + /* + * RoCE Packet: + * Indicates that the packet was recognized as a RoCE. + * This also indicates that the payload_offset field is valid. + */ + #define RX_PKT_CMPL_FLAGS_ITYPE_ROCE \ + (UINT32_C(0x5) << 12) + /* + * ICMP Packet: + * Indicates that the packet was recognized as ICMP. + * This indicates that the payload_offset field is valid. + */ + #define RX_PKT_CMPL_FLAGS_ITYPE_ICMP \ + (UINT32_C(0x7) << 12) + /* + * PtP packet wo/timestamp: + * Indicates that the packet was recognized as a PtP + * packet. + */ + #define RX_PKT_CMPL_FLAGS_ITYPE_PTP_WO_TIMESTAMP \ + (UINT32_C(0x8) << 12) + /* + * PtP packet w/timestamp: + * Indicates that the packet was recognized as a PtP + * packet and that a timestamp was taken for the packet. + */ + #define RX_PKT_CMPL_FLAGS_ITYPE_PTP_W_TIMESTAMP \ + (UINT32_C(0x9) << 12) + #define RX_PKT_CMPL_FLAGS_ITYPE_LAST \ + RX_PKT_CMPL_FLAGS_ITYPE_PTP_W_TIMESTAMP + /* + * This is the length of the data for the packet stored in the + * buffer(s) identified by the opaque value. This includes + * the packet BD and any associated buffer BDs. This does not include + * the length of any data places in aggregation BDs. + */ + uint16_t len; + /* + * This is a copy of the opaque field from the RX BD this completion + * corresponds to. + */ + uint32_t opaque; + uint8_t agg_bufs_v1; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define RX_PKT_CMPL_V1 UINT32_C(0x1) /* @@ -2353,7 +2982,7 @@ struct rx_pkt_cmpl { #define RX_PKT_CMPL_UNUSED1_MASK UINT32_C(0xc0) #define RX_PKT_CMPL_UNUSED1_SFT 6 /* - * This is the RSS hash type for the packet. The value is packed + * This is the RSS hash type for the packet. The value is packed * {tuple_extrac_op[1:0],rss_profile_id[4:0],tuple_extrac_op[2]}. * * The value of tuple_extrac_op provides the information about @@ -2384,7 +3013,7 @@ struct rx_pkt_cmpl { uint8_t rss_hash_type; /* * This value indicates the offset in bytes from the beginning of the packet - * where the inner payload starts. This value is valid for TCP, UDP, + * where the inner payload starts. This value is valid for TCP, UDP, * FCoE, and RoCE packets. * * A value of zero indicates that header is 256B into the packet. @@ -2397,7 +3026,7 @@ struct rx_pkt_cmpl { * based on the mode bits and key value in the VNIC. */ uint32_t rss_hash; -} __attribute__((packed)); +} __rte_packed; /* Last 16 bytes of rx_pkt_cmpl. */ /* rx_pkt_cmpl_hi (size:128b/16B) */ @@ -2408,30 +3037,31 @@ struct rx_pkt_cmpl_hi { * inner packet and that the ip_cs_error field indicates if there * was an error. */ - #define RX_PKT_CMPL_FLAGS2_IP_CS_CALC UINT32_C(0x1) + #define RX_PKT_CMPL_FLAGS2_IP_CS_CALC UINT32_C(0x1) /* * This indicates that the TCP, UDP or ICMP checksum was * calculated for the inner packet and that the l4_cs_error field * indicates if there was an error. */ - #define RX_PKT_CMPL_FLAGS2_L4_CS_CALC UINT32_C(0x2) + #define RX_PKT_CMPL_FLAGS2_L4_CS_CALC UINT32_C(0x2) /* * This indicates that the ip checksum was calculated for the * tunnel header and that the t_ip_cs_error field indicates if there * was an error. */ - #define RX_PKT_CMPL_FLAGS2_T_IP_CS_CALC UINT32_C(0x4) + #define RX_PKT_CMPL_FLAGS2_T_IP_CS_CALC UINT32_C(0x4) /* * This indicates that the UDP checksum was * calculated for the tunnel packet and that the t_l4_cs_error field * indicates if there was an error. */ - #define RX_PKT_CMPL_FLAGS2_T_L4_CS_CALC UINT32_C(0x8) + #define RX_PKT_CMPL_FLAGS2_T_L4_CS_CALC UINT32_C(0x8) /* This value indicates what format the metadata field is. */ - #define RX_PKT_CMPL_FLAGS2_META_FORMAT_MASK UINT32_C(0xf0) - #define RX_PKT_CMPL_FLAGS2_META_FORMAT_SFT 4 - /* No metadata informtaion. Value is zero. */ - #define RX_PKT_CMPL_FLAGS2_META_FORMAT_NONE (UINT32_C(0x0) << 4) + #define RX_PKT_CMPL_FLAGS2_META_FORMAT_MASK UINT32_C(0xf0) + #define RX_PKT_CMPL_FLAGS2_META_FORMAT_SFT 4 + /* No metadata information. Value is zero. */ + #define RX_PKT_CMPL_FLAGS2_META_FORMAT_NONE \ + (UINT32_C(0x0) << 4) /* * The metadata field contains the VLAN tag and TPID value. * - metadata[11:0] contains the vlan VID value. @@ -2439,16 +3069,70 @@ struct rx_pkt_cmpl_hi { * - metadata[15:13] contains the vlan PRI value. * - metadata[31:16] contains the vlan TPID value. */ - #define RX_PKT_CMPL_FLAGS2_META_FORMAT_VLAN (UINT32_C(0x1) << 4) + #define RX_PKT_CMPL_FLAGS2_META_FORMAT_VLAN \ + (UINT32_C(0x1) << 4) + /* + * If ext_meta_format is equal to 1, the metadata field + * contains the lower 16b of the tunnel ID value, justified + * to LSB + * - VXLAN = VNI[23:0] -> VXLAN Network ID + * - Geneve (NGE) = VNI[23:0] a-> Virtual Network Identifier. + * - NVGRE = TNI[23:0] -> Tenant Network ID + * - GRE = KEY[31:0] -> key field with bit mask. zero if K = 0 + * - IPV4 = 0 (not populated) + * - IPV6 = Flow Label[19:0] + * - PPPoE = sessionID[15:0] + * - MPLs = Outer label[19:0] + * - UPAR = Selected[31:0] with bit mask + */ + #define RX_PKT_CMPL_FLAGS2_META_FORMAT_TUNNEL_ID \ + (UINT32_C(0x2) << 4) + /* + * if ext_meta_format is equal to 1, metadata field contains + * 16b metadata from the prepended header (chdr_data). + */ + #define RX_PKT_CMPL_FLAGS2_META_FORMAT_CHDR_DATA \ + (UINT32_C(0x3) << 4) + /* + * If ext_meta_format is equal to 1, the metadata field contains + * the outer_l3_offset, inner_l2_offset, inner_l3_offset and + * inner_l4_size. + * - metadata[8:0] contains the outer_l3_offset. + * - metadata[17:9] contains the inner_l2_offset. + * - metadata[26:18] contains the inner_l3_offset. + * - metadata[31:27] contains the inner_l4_size. + */ + #define RX_PKT_CMPL_FLAGS2_META_FORMAT_HDR_OFFSET \ + (UINT32_C(0x4) << 4) #define RX_PKT_CMPL_FLAGS2_META_FORMAT_LAST \ - RX_PKT_CMPL_FLAGS2_META_FORMAT_VLAN + RX_PKT_CMPL_FLAGS2_META_FORMAT_HDR_OFFSET /* * This field indicates the IP type for the inner-most IP header. - * A value of '0' indicates IPv4. A value of '1' indicates IPv6. + * A value of '0' indicates IPv4. A value of '1' indicates IPv6. * This value is only valid if itype indicates a packet * with an IP header. */ - #define RX_PKT_CMPL_FLAGS2_IP_TYPE UINT32_C(0x100) + #define RX_PKT_CMPL_FLAGS2_IP_TYPE UINT32_C(0x100) + /* + * This indicates that the complete 1's complement checksum was + * calculated for the packet. + */ + #define RX_PKT_CMPL_FLAGS2_COMPLETE_CHECKSUM_CALC UINT32_C(0x200) + /* + * The combination of this value and meta_format indicated what + * format the metadata field is. + */ + #define RX_PKT_CMPL_FLAGS2_EXT_META_FORMAT_MASK UINT32_C(0xc00) + #define RX_PKT_CMPL_FLAGS2_EXT_META_FORMAT_SFT 10 + /* + * This value is the complete 1's complement checksum calculated from + * the start of the outer L3 header to the end of the packet (not + * including the ethernet crc). It is valid when the + * 'complete_checksum_calc' flag is set. + */ + #define RX_PKT_CMPL_FLAGS2_COMPLETE_CHECKSUM_MASK \ + UINT32_C(0xffff0000) + #define RX_PKT_CMPL_FLAGS2_COMPLETE_CHECKSUM_SFT 16 /* * This is data from the CFA block as indicated by the meta_format * field. @@ -2468,8 +3152,8 @@ struct rx_pkt_cmpl_hi { uint16_t errors_v2; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define RX_PKT_CMPL_V2 \ UINT32_C(0x1) @@ -2479,7 +3163,7 @@ struct rx_pkt_cmpl_hi { /* * This error indicates that there was some sort of problem with * the BDs for the packet that was found after part of the - * packet was already placed. The packet should be treated as + * packet was already placed. The packet should be treated as * invalid. */ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_MASK \ @@ -2492,7 +3176,7 @@ struct rx_pkt_cmpl_hi { * Did Not Fit: * Packet did not fit into packet buffer provided. * For regular placement, this means the packet did not fit - * in the buffer provided. For HDS and jumbo placement, this + * in the buffer provided. For HDS and jumbo placement, this * means that the packet could not be placed into 7 physical * buffers or less. */ @@ -2511,8 +3195,14 @@ struct rx_pkt_cmpl_hi { */ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT \ (UINT32_C(0x3) << 1) + /* + * Flush: + * There was a bad_format error on the previous operation + */ + #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_FLUSH \ + (UINT32_C(0x5) << 1) #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_LAST \ - RX_PKT_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT + RX_PKT_CMPL_ERRORS_BUFFER_ERROR_FLUSH /* * This indicates that there was an error in the IP header * checksum. @@ -2539,7 +3229,7 @@ struct rx_pkt_cmpl_hi { UINT32_C(0x80) /* * This indicates that there was a CRC error on either an FCoE - * or RoCE packet. The itype indicates the packet type. + * or RoCE packet. The itype indicates the packet type. */ #define RX_PKT_CMPL_ERRORS_CRC_ERROR \ UINT32_C(0x100) @@ -2553,7 +3243,7 @@ struct rx_pkt_cmpl_hi { #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_SFT 9 /* * No additional error occurred on the tunnel portion - * of the packet of the packet does not have a tunnel. + * or the packet of the packet does not have a tunnel. */ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_NO_ERROR \ (UINT32_C(0x0) << 9) @@ -2611,7 +3301,7 @@ struct rx_pkt_cmpl_hi { #define RX_PKT_CMPL_ERRORS_PKT_ERROR_SFT 12 /* * No additional error occurred on the tunnel portion - * of the packet of the packet does not have a tunnel. + * or the packet of the packet does not have a tunnel. */ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_NO_ERROR \ (UINT32_C(0x0) << 12) @@ -2677,101 +3367,160 @@ struct rx_pkt_cmpl_hi { * This value holds the reordering sequence number for the packet. * If the reordering sequence is not valid, then this value is zero. * The reordering domain for the packet is in the bottom 8 to 10b of - * the rss_hash value. The bottom 20b of this value contain the + * the rss_hash value. The bottom 20b of this value contain the * ordering domain value for the packet. */ #define RX_PKT_CMPL_REORDER_MASK UINT32_C(0xffffff) #define RX_PKT_CMPL_REORDER_SFT 0 -} __attribute__((packed)); +} __rte_packed; -/* rx_tpa_start_cmpl (size:128b/16B) */ -struct rx_tpa_start_cmpl { +/* rx_pkt_v2_cmpl (size:128b/16B) */ +struct rx_pkt_v2_cmpl { uint16_t flags_type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ - #define RX_TPA_START_CMPL_TYPE_MASK UINT32_C(0x3f) - #define RX_TPA_START_CMPL_TYPE_SFT 0 + #define RX_PKT_V2_CMPL_TYPE_MASK UINT32_C(0x3f) + #define RX_PKT_V2_CMPL_TYPE_SFT 0 /* - * RX L2 TPA Start Completion: - * Completion at the beginning of a TPA operation. - * Length = 32B + * RX L2 V2 completion: + * Completion of and L2 RX packet. Length = 32B + * This is the new version of the RX_L2 completion used in SR2 + * and later chips. */ - #define RX_TPA_START_CMPL_TYPE_RX_TPA_START UINT32_C(0x13) - #define RX_TPA_START_CMPL_TYPE_LAST \ - RX_TPA_START_CMPL_TYPE_RX_TPA_START - #define RX_TPA_START_CMPL_FLAGS_MASK UINT32_C(0xffc0) - #define RX_TPA_START_CMPL_FLAGS_SFT 6 - /* This bit will always be '0' for TPA start completions. */ - #define RX_TPA_START_CMPL_FLAGS_ERROR UINT32_C(0x40) + #define RX_PKT_V2_CMPL_TYPE_RX_L2_V2 UINT32_C(0xf) + #define RX_PKT_V2_CMPL_TYPE_LAST \ + RX_PKT_V2_CMPL_TYPE_RX_L2_V2 + #define RX_PKT_V2_CMPL_FLAGS_MASK UINT32_C(0xffc0) + #define RX_PKT_V2_CMPL_FLAGS_SFT 6 + /* + * When this bit is '1', it indicates a packet that has an + * error of some type. Type of error is indicated in + * error_flags. + */ + #define RX_PKT_V2_CMPL_FLAGS_ERROR UINT32_C(0x40) /* This field indicates how the packet was placed in the buffer. */ - #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380) - #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_SFT 7 + #define RX_PKT_V2_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380) + #define RX_PKT_V2_CMPL_FLAGS_PLACEMENT_SFT 7 + /* + * Normal: + * Packet was placed using normal algorithm. + */ + #define RX_PKT_V2_CMPL_FLAGS_PLACEMENT_NORMAL \ + (UINT32_C(0x0) << 7) /* * Jumbo: - * TPA Packet was placed using jumbo algorithm. This means - * that the first buffer will be filled with data before - * moving to aggregation buffers. Each aggregation buffer - * will be filled before moving to the next aggregation - * buffer. + * Packet was placed using jumbo algorithm. */ - #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_JUMBO \ + #define RX_PKT_V2_CMPL_FLAGS_PLACEMENT_JUMBO \ (UINT32_C(0x1) << 7) /* * Header/Data Separation: * Packet was placed using Header/Data separation algorithm. * The separation location is indicated by the itype field. */ - #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_HDS \ + #define RX_PKT_V2_CMPL_FLAGS_PLACEMENT_HDS \ (UINT32_C(0x2) << 7) /* - * GRO/Jumbo: - * Packet will be placed using GRO/Jumbo where the first - * packet is filled with data. Subsequent packets will be - * placed such that any one packet does not span two - * aggregation buffers unless it starts at the beginning of - * an aggregation buffer. + * Truncation: + * Packet was placed using truncation algorithm. The + * placed (truncated) length is indicated in the payload_offset + * field. The original length is indicated in the len field. */ - #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_GRO_JUMBO \ - (UINT32_C(0x5) << 7) + #define RX_PKT_V2_CMPL_FLAGS_PLACEMENT_TRUNCATION \ + (UINT32_C(0x3) << 7) + #define RX_PKT_V2_CMPL_FLAGS_PLACEMENT_LAST \ + RX_PKT_V2_CMPL_FLAGS_PLACEMENT_TRUNCATION + /* This bit is '1' if the RSS field in this completion is valid. */ + #define RX_PKT_V2_CMPL_FLAGS_RSS_VALID UINT32_C(0x400) /* - * GRO/Header-Data Separation: - * Packet will be placed using GRO/HDS where the header - * is in the first packet. - * Payload of each packet will be - * placed such that any one packet does not span two - * aggregation buffers unless it starts at the beginning of - * an aggregation buffer. + * This bit is '1' if metadata has been added to the end of the + * packet in host memory. Metadata starts at the first 32B boundary + * after the end of the packet for regular and jumbo placement. + * It starts at the first 32B boundary after the end of the header + * for HDS placement. The length of the metadata is indicated in the + * metadata itself. */ - #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_GRO_HDS \ - (UINT32_C(0x6) << 7) - #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_LAST \ - RX_TPA_START_CMPL_FLAGS_PLACEMENT_GRO_HDS - /* This bit is '1' if the RSS field in this completion is valid. */ - #define RX_TPA_START_CMPL_FLAGS_RSS_VALID UINT32_C(0x400) - /* unused is 1 b */ - #define RX_TPA_START_CMPL_FLAGS_UNUSED UINT32_C(0x800) + #define RX_PKT_V2_CMPL_FLAGS_PKT_METADATA_PRESENT UINT32_C(0x800) /* * This value indicates what the inner packet determined for the * packet was. */ - #define RX_TPA_START_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000) - #define RX_TPA_START_CMPL_FLAGS_ITYPE_SFT 12 + #define RX_PKT_V2_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000) + #define RX_PKT_V2_CMPL_FLAGS_ITYPE_SFT 12 + /* + * Not Known: + * Indicates that the packet type was not known. + */ + #define RX_PKT_V2_CMPL_FLAGS_ITYPE_NOT_KNOWN \ + (UINT32_C(0x0) << 12) + /* + * IP Packet: + * Indicates that the packet was an IP packet, but further + * classification was not possible. + */ + #define RX_PKT_V2_CMPL_FLAGS_ITYPE_IP \ + (UINT32_C(0x1) << 12) /* * TCP Packet: * Indicates that the packet was IP and TCP. + * This indicates that the payload_offset field is valid. */ - #define RX_TPA_START_CMPL_FLAGS_ITYPE_TCP \ + #define RX_PKT_V2_CMPL_FLAGS_ITYPE_TCP \ (UINT32_C(0x2) << 12) - #define RX_TPA_START_CMPL_FLAGS_ITYPE_LAST \ - RX_TPA_START_CMPL_FLAGS_ITYPE_TCP /* - * This value indicates the amount of packet data written to the - * buffer the opaque field in this completion corresponds to. + * UDP Packet: + * Indicates that the packet was IP and UDP. + * This indicates that the payload_offset field is valid. + */ + #define RX_PKT_V2_CMPL_FLAGS_ITYPE_UDP \ + (UINT32_C(0x3) << 12) + /* + * FCoE Packet: + * Indicates that the packet was recognized as a FCoE. + * This also indicates that the payload_offset field is valid. + */ + #define RX_PKT_V2_CMPL_FLAGS_ITYPE_FCOE \ + (UINT32_C(0x4) << 12) + /* + * RoCE Packet: + * Indicates that the packet was recognized as a RoCE. + * This also indicates that the payload_offset field is valid. + */ + #define RX_PKT_V2_CMPL_FLAGS_ITYPE_ROCE \ + (UINT32_C(0x5) << 12) + /* + * ICMP Packet: + * Indicates that the packet was recognized as ICMP. + * This indicates that the payload_offset field is valid. + */ + #define RX_PKT_V2_CMPL_FLAGS_ITYPE_ICMP \ + (UINT32_C(0x7) << 12) + /* + * PtP packet wo/timestamp: + * Indicates that the packet was recognized as a PtP + * packet. + */ + #define RX_PKT_V2_CMPL_FLAGS_ITYPE_PTP_WO_TIMESTAMP \ + (UINT32_C(0x8) << 12) + /* + * PtP packet w/timestamp: + * Indicates that the packet was recognized as a PtP + * packet and that a timestamp was taken for the packet. + */ + #define RX_PKT_V2_CMPL_FLAGS_ITYPE_PTP_W_TIMESTAMP \ + (UINT32_C(0x9) << 12) + #define RX_PKT_V2_CMPL_FLAGS_ITYPE_LAST \ + RX_PKT_V2_CMPL_FLAGS_ITYPE_PTP_W_TIMESTAMP + /* + * This is the length of the data for the packet stored in the + * buffer(s) identified by the opaque value. This includes + * the packet BD and any associated buffer BDs. This does not include + * the length of any data places in aggregation BDs. */ uint16_t len; /* @@ -2779,21 +3528,26 @@ struct rx_tpa_start_cmpl { * corresponds to. */ uint32_t opaque; + uint8_t agg_bufs_v1; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - uint8_t v1; + #define RX_PKT_V2_CMPL_V1 UINT32_C(0x1) /* - * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * This value is the number of aggregation buffers that follow this + * entry in the completion ring that are a part of this packet. + * If the value is zero, then the packet is completely contained + * in the buffer space provided for the packet in the RX ring. */ - #define RX_TPA_START_CMPL_V1 UINT32_C(0x1) - #define RX_TPA_START_CMPL_LAST RX_TPA_START_CMPL_V1 + #define RX_PKT_V2_CMPL_AGG_BUFS_MASK UINT32_C(0x3e) + #define RX_PKT_V2_CMPL_AGG_BUFS_SFT 1 + /* unused1 is 2 b */ + #define RX_PKT_V2_CMPL_UNUSED1_MASK UINT32_C(0xc0) + #define RX_PKT_V2_CMPL_UNUSED1_SFT 6 /* - * This is the RSS hash type for the packet. The value is packed + * This is the RSS hash type for the packet. The value is packed * {tuple_extrac_op[1:0],rss_profile_id[4:0],tuple_extrac_op[2]}. * * The value of tuple_extrac_op provides the information about @@ -2822,4015 +3576,4861 @@ struct rx_tpa_start_cmpl { * corresponding to 4-tuples are only valid for TCP traffic. */ uint8_t rss_hash_type; - /* - * This is the aggregation ID that the completion is associated - * with. Use this number to correlate the TPA start completion - * with the TPA end completion. - */ - uint16_t agg_id; - /* unused2 is 9 b */ - #define RX_TPA_START_CMPL_UNUSED2_MASK UINT32_C(0x1ff) - #define RX_TPA_START_CMPL_UNUSED2_SFT 0 - /* - * This is the aggregation ID that the completion is associated - * with. Use this number to correlate the TPA start completion - * with the TPA end completion. - */ - #define RX_TPA_START_CMPL_AGG_ID_MASK UINT32_C(0xfe00) - #define RX_TPA_START_CMPL_AGG_ID_SFT 9 + uint16_t metadata1_payload_offset; + /* + * This is data from the CFA as indicated by the meta_format field. + * If truncation placement is not used, this value indicates the offset + * in bytes from the beginning of the packet where the inner payload + * starts. This value is valid for TCP, UDP, FCoE, and RoCE packets. If + * truncation placement is used, this value represents the placed + * (truncated) length of the packet. + */ + #define RX_PKT_V2_CMPL_PAYLOAD_OFFSET_MASK UINT32_C(0x1ff) + #define RX_PKT_V2_CMPL_PAYLOAD_OFFSET_SFT 0 + /* This is data from the CFA as indicated by the meta_format field. */ + #define RX_PKT_V2_CMPL_METADATA1_MASK UINT32_C(0xf000) + #define RX_PKT_V2_CMPL_METADATA1_SFT 12 + /* When meta_format != 0, this value is the VLAN TPID_SEL. */ + #define RX_PKT_V2_CMPL_METADATA1_TPID_SEL_MASK UINT32_C(0x7000) + #define RX_PKT_V2_CMPL_METADATA1_TPID_SEL_SFT 12 + /* When meta_format != 0, this value is the VLAN TPID_SEL. */ + #define RX_PKT_V2_CMPL_METADATA1_VALID UINT32_C(0x8000) /* * This value is the RSS hash value calculated for the packet - * based on the mode bits and key value in the VNIC. + * based on the mode bits and key value in the VNIC. When vee_cmpl_mode + * is set in VNIC context, this is the lower 32b of the host address + * from the first BD used to place the packet. */ uint32_t rss_hash; -} __attribute__((packed)); +} __rte_packed; -/* Last 16 bytes of rx_tpq_start_cmpl. */ -/* rx_tpa_start_cmpl_hi (size:128b/16B) */ -struct rx_tpa_start_cmpl_hi { +/* Last 16 bytes of RX Packet V2 Completion Record */ +/* rx_pkt_v2_cmpl_hi (size:128b/16B) */ +struct rx_pkt_v2_cmpl_hi { uint32_t flags2; /* - * This indicates that the ip checksum was calculated for the - * inner packet and that the sum passed for all segments - * included in the aggregation. + * When this bit is '0', the cs_ok field has the following definition:- + * ip_cs_ok[2:0] = The number of header groups with a valid IP checksum + * in the delivered packet, counted from the outer-most header group to + * the inner-most header group, stopping at the first error. - + * l4_cs_ok[5:3] = The number of header groups with a valid L4 checksum + * in the delivered packet, counted from the outer-most header group to + * the inner-most header group, stopping at the first error. When this + * bit is '1', the cs_ok field has the following definition: - + * hdr_cnt[2:0] = The number of header groups that were parsed by the + * chip and passed in the delivered packet. - ip_cs_all_ok[3] =This bit + * will be '1' if all the parsed header groups with an IP checksum are + * valid. - l4_cs_all_ok[4] = This bit will be '1' if all the parsed + * header groups with an L4 checksum are valid. + */ + #define RX_PKT_V2_CMPL_HI_FLAGS2_CS_ALL_OK_MODE \ + UINT32_C(0x8) + /* This value indicates what format the metadata field is. */ + #define RX_PKT_V2_CMPL_HI_FLAGS2_META_FORMAT_MASK \ + UINT32_C(0xf0) + #define RX_PKT_V2_CMPL_HI_FLAGS2_META_FORMAT_SFT 4 + /* There is no metadata information. Values are zero. */ + #define RX_PKT_V2_CMPL_HI_FLAGS2_META_FORMAT_NONE \ + (UINT32_C(0x0) << 4) + /* + * The {metadata1, metadata0} fields contain the vtag + * information: - vtag[19:0] = {valid, tpid_sel[2:0], pri[2:0], + * de, vid[11:0]} The metadata2 field contains the table scope + * and action record pointer. - metadata2[25:0] contains the + * action record pointer. - metadata2[31:26] contains the table + * scope. */ - #define RX_TPA_START_CMPL_FLAGS2_IP_CS_CALC UINT32_C(0x1) + #define RX_PKT_V2_CMPL_HI_FLAGS2_META_FORMAT_ACT_REC_PTR \ + (UINT32_C(0x1) << 4) /* - * This indicates that the TCP, UDP or ICMP checksum was - * calculated for the inner packet and that the sum passed - * for all segments included in the aggregation. + * The {metadata1, metadata0} fields contain the vtag + * information: + * - vtag[19:0] = {valid, tpid_sel[2:0], pri[2:0], de, vid[11:0]} + * The metadata2 field contains the Tunnel ID + * value, justified to LSB. i + * - VXLAN = VNI[23:0] -> VXLAN Network ID + * - Geneve (NGE) = VNI[23:0] a-> Virtual Network Identifier + * - NVGRE = TNI[23:0] -> Tenant Network ID + * - GRE = KEY[31:0] -> key field with bit mask. zero if K=0 + * - IPv4 = 0 (not populated) + * - IPv6 = Flow Label[19:0] + * - PPPoE = sessionID[15:0] + * - MPLs = Outer label[19:0] + * - UPAR = Selected[31:0] with bit mask + */ + #define RX_PKT_V2_CMPL_HI_FLAGS2_META_FORMAT_TUNNEL_ID \ + (UINT32_C(0x2) << 4) + /* + * The {metadata1, metadata0} fields contain the vtag + * information: + * - vtag[19:0] = {valid, tpid_sel[2:0], pri[2:0],de, vid[11:0]} + * The metadata2 field contains the 32b metadata from the prepended + * header (chdr_data). */ - #define RX_TPA_START_CMPL_FLAGS2_L4_CS_CALC UINT32_C(0x2) + #define RX_PKT_V2_CMPL_HI_FLAGS2_META_FORMAT_CHDR_DATA \ + (UINT32_C(0x3) << 4) /* - * This indicates that the ip checksum was calculated for the - * tunnel header and that the sum passed for all segments - * included in the aggregation. + * The {metadata1, metadata0} fields contain the vtag + * information: + * - vtag[19:0] = {valid, tpid_sel[2:0], pri[2:0], de, vid[11:0]} + * The metadata2 field contains the outer_l3_offset, + * inner_l2_offset, inner_l3_offset, and inner_l4_size. + * - metadata2[8:0] contains the outer_l3_offset. + * - metadata2[17:9] contains the inner_l2_offset. + * - metadata2[26:18] contains the inner_l3_offset. + * - metadata2[31:27] contains the inner_l4_size. + */ + #define RX_PKT_V2_CMPL_HI_FLAGS2_META_FORMAT_HDR_OFFSET \ + (UINT32_C(0x4) << 4) + #define RX_PKT_V2_CMPL_HI_FLAGS2_META_FORMAT_LAST \ + RX_PKT_V2_CMPL_HI_FLAGS2_META_FORMAT_HDR_OFFSET + /* + * This field indicates the IP type for the inner-most IP header. + * A value of '0' indicates IPv4. A value of '1' indicates IPv6. + * This value is only valid if itype indicates a packet + * with an IP header. */ - #define RX_TPA_START_CMPL_FLAGS2_T_IP_CS_CALC UINT32_C(0x4) + #define RX_PKT_V2_CMPL_HI_FLAGS2_IP_TYPE \ + UINT32_C(0x100) /* - * This indicates that the UDP checksum was - * calculated for the tunnel packet and that the sum passed for - * all segments included in the aggregation. + * This indicates that the complete 1's complement checksum was + * calculated for the packet. */ - #define RX_TPA_START_CMPL_FLAGS2_T_L4_CS_CALC UINT32_C(0x8) - /* This value indicates what format the metadata field is. */ - #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_MASK UINT32_C(0xf0) - #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_SFT 4 - /* No metadata informtaion. Value is zero. */ - #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_NONE \ - (UINT32_C(0x0) << 4) + #define RX_PKT_V2_CMPL_HI_FLAGS2_COMPLETE_CHECKSUM_CALC \ + UINT32_C(0x200) /* - * The metadata field contains the VLAN tag and TPID value. - * - metadata[11:0] contains the vlan VID value. - * - metadata[12] contains the vlan DE value. - * - metadata[15:13] contains the vlan PRI value. - * - metadata[31:16] contains the vlan TPID value. + * This field indicates the status of IP and L4 CS calculations done + * by the chip. The format of this field is indicated by the + * cs_all_ok_mode bit. */ - #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_VLAN \ - (UINT32_C(0x1) << 4) - #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_LAST \ - RX_TPA_START_CMPL_FLAGS2_META_FORMAT_VLAN + #define RX_PKT_V2_CMPL_HI_FLAGS2_CS_OK_MASK \ + UINT32_C(0xfc00) + #define RX_PKT_V2_CMPL_HI_FLAGS2_CS_OK_SFT 10 /* - * This field indicates the IP type for the inner-most IP header. - * A value of '0' indicates IPv4. A value of '1' indicates IPv6. + * This value is the complete 1's complement checksum calculated from + * the start of the outer L3 header to the end of the packet (not + * including the ethernet crc). It is valid when the + * 'complete_checksum_calc' flag is set. */ - #define RX_TPA_START_CMPL_FLAGS2_IP_TYPE UINT32_C(0x100) + #define RX_PKT_V2_CMPL_HI_FLAGS2_COMPLETE_CHECKSUM_MASK \ + UINT32_C(0xffff0000) + #define RX_PKT_V2_CMPL_HI_FLAGS2_COMPLETE_CHECKSUM_SFT 16 /* * This is data from the CFA block as indicated by the meta_format * field. - */ - uint32_t metadata; - /* When meta_format=1, this value is the VLAN VID. */ - #define RX_TPA_START_CMPL_METADATA_VID_MASK UINT32_C(0xfff) - #define RX_TPA_START_CMPL_METADATA_VID_SFT 0 - /* When meta_format=1, this value is the VLAN DE. */ - #define RX_TPA_START_CMPL_METADATA_DE UINT32_C(0x1000) - /* When meta_format=1, this value is the VLAN PRI. */ - #define RX_TPA_START_CMPL_METADATA_PRI_MASK UINT32_C(0xe000) - #define RX_TPA_START_CMPL_METADATA_PRI_SFT 13 - /* When meta_format=1, this value is the VLAN TPID. */ - #define RX_TPA_START_CMPL_METADATA_TPID_MASK UINT32_C(0xffff0000) - #define RX_TPA_START_CMPL_METADATA_TPID_SFT 16 - uint16_t v2; + * - meta_format 0 - none - metadata2 = 0 - not valid/not stripped + * - meta_format 1 - act_rec_ptr - metadata2 = {table_scope[5:0], + * act_rec_ptr[25:0]} + * - meta_format 2 - tunnel_id - metadata2 = tunnel_id[31:0] + * - meta_format 3 - chdr_data - metadata2 = updated_chdr_data[31:0] + * - meta_format 4 - hdr_offsets - metadata2 = hdr_offsets[31:0] + * When vee_cmpl_mode is set in VNIC context, this is the upper 32b + * of the host address from the first BD used to place the packet. + */ + uint32_t metadata2; + uint16_t errors_v2; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - #define RX_TPA_START_CMPL_V2 UINT32_C(0x1) + #define RX_PKT_V2_CMPL_HI_V2 \ + UINT32_C(0x1) + #define RX_PKT_V2_CMPL_HI_ERRORS_MASK \ + UINT32_C(0xfffe) + #define RX_PKT_V2_CMPL_HI_ERRORS_SFT 1 /* - * This field identifies the CFA action rule that was used for this - * packet. + * This error indicates that there was some sort of problem with + * the BDs for the packet that was found after part of the + * packet was already placed. The packet should be treated as + * invalid. */ - uint16_t cfa_code; + #define RX_PKT_V2_CMPL_HI_ERRORS_BUFFER_ERROR_MASK \ + UINT32_C(0xe) + #define RX_PKT_V2_CMPL_HI_ERRORS_BUFFER_ERROR_SFT 1 + /* No buffer error */ + #define RX_PKT_V2_CMPL_HI_ERRORS_BUFFER_ERROR_NO_BUFFER \ + (UINT32_C(0x0) << 1) /* - * This is the size in bytes of the inner most L4 header. - * This can be subtracted from the payload_offset to determine - * the start of the inner most L4 header. + * Did Not Fit: Packet did not fit into packet buffer provided. + * For regular placement, this means the packet did not fit in + * the buffer provided. For HDS and jumbo placement, this means + * that the packet could not be placed into 8 physical buffers + * (if fixed-size buffers are used), or that the packet could + * not be placed in the number of physical buffers configured + * for the VNIC (if variable-size buffers are used) */ - uint32_t inner_l4_size_inner_l3_offset_inner_l2_offset_outer_l3_offset; + #define RX_PKT_V2_CMPL_HI_ERRORS_BUFFER_ERROR_DID_NOT_FIT \ + (UINT32_C(0x1) << 1) /* - * This is the offset from the beginning of the packet in bytes for - * the outer L3 header. If there is no outer L3 header, then this - * value is zero. + * Not On Chip: All BDs needed for the packet were not on-chip + * when the packet arrived. For regular placement, this error is + * not valid. For HDS and jumbo placement, this means that not + * enough agg BDs were posted to place the packet. */ - #define RX_TPA_START_CMPL_OUTER_L3_OFFSET_MASK UINT32_C(0x1ff) - #define RX_TPA_START_CMPL_OUTER_L3_OFFSET_SFT 0 + #define RX_PKT_V2_CMPL_HI_ERRORS_BUFFER_ERROR_NOT_ON_CHIP \ + (UINT32_C(0x2) << 1) /* - * This is the offset from the beginning of the packet in bytes for - * the inner most L2 header. + * Bad Format: + * BDs were not formatted correctly. */ - #define RX_TPA_START_CMPL_INNER_L2_OFFSET_MASK UINT32_C(0x3fe00) - #define RX_TPA_START_CMPL_INNER_L2_OFFSET_SFT 9 + #define RX_PKT_V2_CMPL_HI_ERRORS_BUFFER_ERROR_BAD_FORMAT \ + (UINT32_C(0x3) << 1) /* - * This is the offset from the beginning of the packet in bytes for - * the inner most L3 header. + * Flush: + * There was a bad_format error on the previous operation */ - #define RX_TPA_START_CMPL_INNER_L3_OFFSET_MASK UINT32_C(0x7fc0000) - #define RX_TPA_START_CMPL_INNER_L3_OFFSET_SFT 18 + #define RX_PKT_V2_CMPL_HI_ERRORS_BUFFER_ERROR_FLUSH \ + (UINT32_C(0x5) << 1) + #define RX_PKT_V2_CMPL_HI_ERRORS_BUFFER_ERROR_LAST \ + RX_PKT_V2_CMPL_HI_ERRORS_BUFFER_ERROR_FLUSH /* - * This is the size in bytes of the inner most L4 header. - * This can be subtracted from the payload_offset to determine - * the start of the inner most L4 header. + * This indicates that there was an error in the outer tunnel + * portion of the packet when this field is non-zero. */ - #define RX_TPA_START_CMPL_INNER_L4_SIZE_MASK UINT32_C(0xf8000000) - #define RX_TPA_START_CMPL_INNER_L4_SIZE_SFT 27 -} __attribute__((packed)); - -/* rx_tpa_end_cmpl (size:128b/16B) */ -struct rx_tpa_end_cmpl { - uint16_t flags_type; + #define RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_MASK \ + UINT32_C(0x70) + #define RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_SFT 4 /* - * This field indicates the exact type of the completion. - * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B - * records. + * No additional error occurred on the outer tunnel portion + * of the packet or the packet does not have a outer tunnel. */ - #define RX_TPA_END_CMPL_TYPE_MASK UINT32_C(0x3f) - #define RX_TPA_END_CMPL_TYPE_SFT 0 + #define RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_NO_ERROR \ + (UINT32_C(0x0) << 4) /* - * RX L2 TPA End Completion: - * Completion at the end of a TPA operation. - * Length = 32B + * Indicates that IP header version does not match expectation + * from L2 Ethertype for IPv4 and IPv6 in the outer tunnel header. */ - #define RX_TPA_END_CMPL_TYPE_RX_TPA_END UINT32_C(0x15) - #define RX_TPA_END_CMPL_TYPE_LAST \ - RX_TPA_END_CMPL_TYPE_RX_TPA_END - #define RX_TPA_END_CMPL_FLAGS_MASK UINT32_C(0xffc0) - #define RX_TPA_END_CMPL_FLAGS_SFT 6 + #define RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_OT_L3_BAD_VERSION \ + (UINT32_C(0x1) << 4) /* - * When this bit is '1', it indicates a packet that has an - * error of some type. Type of error is indicated in - * error_flags. + * Indicates that header length is out of range in the outer + * tunnel header. Valid for IPv4. */ - #define RX_TPA_END_CMPL_FLAGS_ERROR UINT32_C(0x40) - /* This field indicates how the packet was placed in the buffer. */ - #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380) - #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_SFT 7 + #define RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_OT_L3_BAD_HDR_LEN \ + (UINT32_C(0x2) << 4) /* - * Jumbo: - * TPA Packet was placed using jumbo algorithm. This means - * that the first buffer will be filled with data before - * moving to aggregation buffers. Each aggregation buffer - * will be filled before moving to the next aggregation - * buffer. + * Indicates that physical packet is shorter than that claimed + * by the outer tunnel l3 header length. Valid for IPv4, or + * IPv6 outer tunnel packets. */ - #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_JUMBO \ - (UINT32_C(0x1) << 7) + #define RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_OT_IP_TOTAL_ERROR \ + (UINT32_C(0x3) << 4) /* - * Header/Data Separation: - * Packet was placed using Header/Data separation algorithm. - * The separation location is indicated by the itype field. + * Indicates that the physical packet is shorter than that + * claimed by the outer tunnel UDP header length for a outer + * tunnel UDP packet that is not fragmented. */ - #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_HDS \ - (UINT32_C(0x2) << 7) + #define RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_OT_UDP_TOTAL_ERROR \ + (UINT32_C(0x4) << 4) /* - * GRO/Jumbo: - * Packet will be placed using GRO/Jumbo where the first - * packet is filled with data. Subsequent packets will be - * placed such that any one packet does not span two - * aggregation buffers unless it starts at the beginning of - * an aggregation buffer. + * Indicates that the IPv4 TTL or IPv6 hop limit check have + * failed (e.g. TTL = 0) in the outer tunnel header. Valid for + * IPv4, and IPv6. */ - #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_GRO_JUMBO \ - (UINT32_C(0x5) << 7) + #define RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_OT_L3_BAD_TTL \ + (UINT32_C(0x5) << 4) /* - * GRO/Header-Data Separation: - * Packet will be placed using GRO/HDS where the header - * is in the first packet. - * Payload of each packet will be - * placed such that any one packet does not span two - * aggregation buffers unless it starts at the beginning of - * an aggregation buffer. + * Indicates that the IP checksum failed its check in the outer + * tunnel header. */ - #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_GRO_HDS \ - (UINT32_C(0x6) << 7) - #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_LAST \ - RX_TPA_END_CMPL_FLAGS_PLACEMENT_GRO_HDS - /* unused is 2 b */ - #define RX_TPA_END_CMPL_FLAGS_UNUSED_MASK UINT32_C(0xc00) - #define RX_TPA_END_CMPL_FLAGS_UNUSED_SFT 10 + #define RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_OT_IP_CS_ERROR \ + (UINT32_C(0x6) << 4) /* - * This value indicates what the inner packet determined for the - * packet was. - * - 2 TCP Packet - * Indicates that the packet was IP and TCP. This indicates - * that the ip_cs field is valid and that the tcp_udp_cs - * field is valid and contains the TCP checksum. - * This also indicates that the payload_offset field is valid. + * Indicates that the L4 checksum failed its check in the outer + * tunnel header. */ - #define RX_TPA_END_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000) - #define RX_TPA_END_CMPL_FLAGS_ITYPE_SFT 12 + #define RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_OT_L4_CS_ERROR \ + (UINT32_C(0x7) << 4) + #define RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_LAST \ + RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_OT_L4_CS_ERROR /* - * This value is zero for TPA End completions. - * There is no data in the buffer that corresponds to the opaque - * value in this completion. + * This indicates that there was a CRC error on either an FCoE + * or RoCE packet. The itype indicates the packet type. */ - uint16_t len; + #define RX_PKT_V2_CMPL_HI_ERRORS_CRC_ERROR \ + UINT32_C(0x100) /* - * This is a copy of the opaque field from the RX BD this completion - * corresponds to. + * This indicates that there was an error in the tunnel portion + * of the packet when this field is non-zero. */ - uint32_t opaque; + #define RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_MASK \ + UINT32_C(0xe00) + #define RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_SFT 9 /* - * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * No additional error occurred on the tunnel portion + * of the packet or the packet does not have a tunnel. */ - uint8_t agg_bufs_v1; + #define RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_NO_ERROR \ + (UINT32_C(0x0) << 9) /* - * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * Indicates that IP header version does not match expectation + * from L2 Ethertype for IPv4 and IPv6 in the tunnel header. */ - #define RX_TPA_END_CMPL_V1 UINT32_C(0x1) + #define RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_T_L3_BAD_VERSION \ + (UINT32_C(0x1) << 9) /* - * This value is the number of aggregation buffers that follow this - * entry in the completion ring that are a part of this aggregation - * packet. - * If the value is zero, then the packet is completely contained - * in the buffer space provided in the aggregation start completion. + * Indicates that header length is out of range in the tunnel + * header. Valid for IPv4. */ - #define RX_TPA_END_CMPL_AGG_BUFS_MASK UINT32_C(0x7e) - #define RX_TPA_END_CMPL_AGG_BUFS_SFT 1 - /* This value is the number of segments in the TPA operation. */ - uint8_t tpa_segs; + #define RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_T_L3_BAD_HDR_LEN \ + (UINT32_C(0x2) << 9) /* - * This value indicates the offset in bytes from the beginning of the packet - * where the inner payload starts. This value is valid for TCP, UDP, - * FCoE, and RoCE packets. - * - * A value of zero indicates an offset of 256 bytes. + * Indicates that physical packet is shorter than that claimed + * by the tunnel l3 header length. Valid for IPv4, or IPv6 tunnel + * packet packets. */ - uint8_t payload_offset; - uint8_t agg_id; - /* unused2 is 1 b */ - #define RX_TPA_END_CMPL_UNUSED2 UINT32_C(0x1) + #define RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_T_IP_TOTAL_ERROR \ + (UINT32_C(0x3) << 9) /* - * This is the aggregation ID that the completion is associated - * with. Use this number to correlate the TPA start completion - * with the TPA end completion. + * Indicates that the physical packet is shorter than that claimed + * by the tunnel UDP header length for a tunnel UDP packet that is + * not fragmented. */ - #define RX_TPA_END_CMPL_AGG_ID_MASK UINT32_C(0xfe) - #define RX_TPA_END_CMPL_AGG_ID_SFT 1 + #define RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_T_UDP_TOTAL_ERROR \ + (UINT32_C(0x4) << 9) /* - * For non-GRO packets, this value is the - * timestamp delta between earliest and latest timestamp values for - * TPA packet. If packets were not time stamped, then delta will be - * zero. - * - * For GRO packets, this field is zero except for the following - * sub-fields. - * - tsdelta[31] - * Timestamp present indication. When '0', no Timestamp - * option is in the packet. When '1', then a Timestamp - * option is present in the packet. + * Indicates that the IPv4 TTL or IPv6 hop limit check have failed + * (e.g. TTL = 0) in the tunnel header. Valid for IPv4, and IPv6. */ - uint32_t tsdelta; -} __attribute__((packed)); - -/* Last 16 bytes of rx_tpa_end_cmpl. */ -/* rx_tpa_end_cmpl_hi (size:128b/16B) */ -struct rx_tpa_end_cmpl_hi { + #define RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_T_L3_BAD_TTL \ + (UINT32_C(0x5) << 9) /* - * This value is the number of duplicate ACKs that have been - * received as part of the TPA operation. + * Indicates that the IP checksum failed its check in the tunnel + * header. */ - uint32_t tpa_dup_acks; + #define RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_T_IP_CS_ERROR \ + (UINT32_C(0x6) << 9) /* - * This value is the number of duplicate ACKs that have been - * received as part of the TPA operation. + * Indicates that the L4 checksum failed its check in the tunnel + * header. */ - #define RX_TPA_END_CMPL_TPA_DUP_ACKS_MASK UINT32_C(0xf) - #define RX_TPA_END_CMPL_TPA_DUP_ACKS_SFT 0 + #define RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_T_L4_CS_ERROR \ + (UINT32_C(0x7) << 9) + #define RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_LAST \ + RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_T_L4_CS_ERROR /* - * This value is the valid when TPA completion is active. It - * indicates the length of the longest segment of the TPA operation - * for LRO mode and the length of the first segment in GRO mode. - * - * This value may be used by GRO software to re-construct the original - * packet stream from the TPA packet. This is the length of all - * but the last segment for GRO. In LRO mode this value may be used - * to indicate MSS size to the stack. + * This indicates that there was an error in the inner + * portion of the packet when this + * field is non-zero. */ - uint16_t tpa_seg_len; - /* unused4 is 16 b */ - uint16_t unused3; - uint16_t errors_v2; + #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_MASK \ + UINT32_C(0xf000) + #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_SFT 12 /* - * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * No additional error occurred on the tunnel portion + * or the packet of the packet does not have a tunnel. */ - #define RX_TPA_END_CMPL_V2 UINT32_C(0x1) - #define RX_TPA_END_CMPL_ERRORS_MASK UINT32_C(0xfffe) - #define RX_TPA_END_CMPL_ERRORS_SFT 1 + #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_NO_ERROR \ + (UINT32_C(0x0) << 12) /* - * This error indicates that there was some sort of problem with - * the BDs for the packet that was found after part of the - * packet was already placed. The packet should be treated as - * invalid. + * Indicates that IP header version does not match + * expectation from L2 Ethertype for IPv4 and IPv6 or that + * option other than VFT was parsed on + * FCoE packet. */ - #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe) - #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_SFT 1 + #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_L3_BAD_VERSION \ + (UINT32_C(0x1) << 12) /* - * This error occurs when there is a fatal HW problem in - * the chip only. It indicates that there were not - * BDs on chip but that there was adequate reservation. - * provided by the TPA block. + * indicates that header length is out of range. Valid for + * IPv4 and RoCE */ - #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_NOT_ON_CHIP \ - (UINT32_C(0x2) << 1) + #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_L3_BAD_HDR_LEN \ + (UINT32_C(0x2) << 12) /* - * This error occurs when TPA block was not configured to - * reserve adequate BDs for TPA operations on this RX - * ring. All data for the TPA operation was not placed. - * - * This error can also be generated when the number of - * segments is not programmed correctly in TPA and the - * 33 total aggregation buffers allowed for the TPA - * operation has been exceeded. + * indicates that the IPv4 TTL or IPv6 hop limit check + * have failed (e.g. TTL = 0). Valid for IPv4, and IPv6 */ - #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_RSV_ERROR \ - (UINT32_C(0x4) << 1) - #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_LAST \ - RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_RSV_ERROR - /* unused5 is 16 b */ - uint16_t unused_4; + #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_L3_BAD_TTL \ + (UINT32_C(0x3) << 12) /* - * This is the opaque value that was completed for the TPA start - * completion that corresponds to this TPA end completion. + * Indicates that physical packet is shorter than that + * claimed by the l3 header length. Valid for IPv4, + * IPv6 packet or RoCE packets. */ - uint32_t start_opaque; -} __attribute__((packed)); - -/* rx_abuf_cmpl (size:128b/16B) */ -struct rx_abuf_cmpl { - uint16_t type; + #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_IP_TOTAL_ERROR \ + (UINT32_C(0x4) << 12) /* - * This field indicates the exact type of the completion. - * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B - * records. + * Indicates that the physical packet is shorter than that + * claimed by the UDP header length for a UDP packet that is + * not fragmented. */ - #define RX_ABUF_CMPL_TYPE_MASK UINT32_C(0x3f) - #define RX_ABUF_CMPL_TYPE_SFT 0 + #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_UDP_TOTAL_ERROR \ + (UINT32_C(0x5) << 12) /* - * RX Aggregation Buffer completion : - * Completion of an L2 aggregation buffer in support of - * TPA, HDS, or Jumbo packet completion. Length = 16B + * Indicates that TCP header length > IP payload. Valid for + * TCP packets only. */ - #define RX_ABUF_CMPL_TYPE_RX_AGG UINT32_C(0x12) - #define RX_ABUF_CMPL_TYPE_LAST RX_ABUF_CMPL_TYPE_RX_AGG + #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_L4_BAD_HDR_LEN \ + (UINT32_C(0x6) << 12) + /* Indicates that TCP header length < 5. Valid for TCP. */ + #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_L4_BAD_HDR_LEN_TOO_SMALL \ + (UINT32_C(0x7) << 12) /* - * This is the length of the data for the packet stored in this - * aggregation buffer identified by the opaque value. This does not - * include the length of any - * data placed in other aggregation BDs or in the packet or buffer - * BDs. This length does not include any space added due to - * hdr_offset register during HDS placement mode. + * Indicates that TCP option headers result in a TCP header + * size that does not match data offset in TCP header. Valid + * for TCP. */ - uint16_t len; + #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_L4_BAD_OPT_LEN \ + (UINT32_C(0x8) << 12) /* - * This is a copy of the opaque field from the RX BD this aggregation - * buffer corresponds to. + * Indicates that the IP checksum failed its check in the + * inner header. */ - uint32_t opaque; - uint32_t v; + #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_IP_CS_ERROR \ + (UINT32_C(0x9) << 12) /* - * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * Indicates that the L4 checksum failed its check in the + * inner header. */ - #define RX_ABUF_CMPL_V UINT32_C(0x1) - /* unused3 is 32 b */ - uint32_t unused_2; -} __attribute__((packed)); + #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_L4_CS_ERROR \ + (UINT32_C(0xa) << 12) + #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_LAST \ + RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_L4_CS_ERROR + /* + * This is data from the CFA block as indicated by the meta_format + * field. + */ + uint16_t metadata0; + /* When meta_format=1, this value is the VLAN VID. */ + #define RX_PKT_V2_CMPL_HI_METADATA0_VID_MASK UINT32_C(0xfff) + #define RX_PKT_V2_CMPL_HI_METADATA0_VID_SFT 0 + /* When meta_format=1, this value is the VLAN DE. */ + #define RX_PKT_V2_CMPL_HI_METADATA0_DE UINT32_C(0x1000) + /* When meta_format=1, this value is the VLAN PRI. */ + #define RX_PKT_V2_CMPL_HI_METADATA0_PRI_MASK UINT32_C(0xe000) + #define RX_PKT_V2_CMPL_HI_METADATA0_PRI_SFT 13 + /* + * The timestamp field contains the 32b timestamp for the packet from + * the MAC. + */ + uint32_t timestamp; +} __rte_packed; -/* eject_cmpl (size:128b/16B) */ -struct eject_cmpl { - uint16_t type; +/* + * This TPA completion structure is used on devices where the + * `hwrm_vnic_qcaps.max_aggs_supported` value is 0. + */ +/* rx_tpa_start_cmpl (size:128b/16B) */ +struct rx_tpa_start_cmpl { + uint16_t flags_type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ - #define EJECT_CMPL_TYPE_MASK UINT32_C(0x3f) - #define EJECT_CMPL_TYPE_SFT 0 + #define RX_TPA_START_CMPL_TYPE_MASK UINT32_C(0x3f) + #define RX_TPA_START_CMPL_TYPE_SFT 0 /* - * Statistics Ejection Completion: - * Completion of statistics data ejection buffer. - * Length = 16B + * RX L2 TPA Start Completion: + * Completion at the beginning of a TPA operation. + * Length = 32B */ - #define EJECT_CMPL_TYPE_STAT_EJECT UINT32_C(0x1a) - #define EJECT_CMPL_TYPE_LAST EJECT_CMPL_TYPE_STAT_EJECT + #define RX_TPA_START_CMPL_TYPE_RX_TPA_START UINT32_C(0x13) + #define RX_TPA_START_CMPL_TYPE_LAST \ + RX_TPA_START_CMPL_TYPE_RX_TPA_START + #define RX_TPA_START_CMPL_FLAGS_MASK UINT32_C(0xffc0) + #define RX_TPA_START_CMPL_FLAGS_SFT 6 + /* This bit will always be '0' for TPA start completions. */ + #define RX_TPA_START_CMPL_FLAGS_ERROR UINT32_C(0x40) + /* This field indicates how the packet was placed in the buffer. */ + #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380) + #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_SFT 7 /* - * This is the length of the statistics data stored in this + * Jumbo: + * TPA Packet was placed using jumbo algorithm. This means + * that the first buffer will be filled with data before + * moving to aggregation buffers. Each aggregation buffer + * will be filled before moving to the next aggregation * buffer. */ - uint16_t len; + #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_JUMBO \ + (UINT32_C(0x1) << 7) /* - * This is a copy of the opaque field from the RX BD this ejection - * buffer corresponds to. + * Header/Data Separation: + * Packet was placed using Header/Data separation algorithm. + * The separation location is indicated by the itype field. */ - uint32_t opaque; - uint32_t v; + #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_HDS \ + (UINT32_C(0x2) << 7) /* - * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * GRO/Jumbo: + * Packet will be placed using GRO/Jumbo where the first + * packet is filled with data. Subsequent packets will be + * placed such that any one packet does not span two + * aggregation buffers unless it starts at the beginning of + * an aggregation buffer. */ - #define EJECT_CMPL_V UINT32_C(0x1) - /* unused3 is 32 b */ - uint32_t unused_2; -} __attribute__((packed)); - -/* hwrm_cmpl (size:128b/16B) */ -struct hwrm_cmpl { - uint16_t type; + #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_GRO_JUMBO \ + (UINT32_C(0x5) << 7) /* - * This field indicates the exact type of the completion. - * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B - * records. + * GRO/Header-Data Separation: + * Packet will be placed using GRO/HDS where the header + * is in the first packet. + * Payload of each packet will be + * placed such that any one packet does not span two + * aggregation buffers unless it starts at the beginning of + * an aggregation buffer. */ - #define HWRM_CMPL_TYPE_MASK UINT32_C(0x3f) - #define HWRM_CMPL_TYPE_SFT 0 + #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_GRO_HDS \ + (UINT32_C(0x6) << 7) + #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_LAST \ + RX_TPA_START_CMPL_FLAGS_PLACEMENT_GRO_HDS + /* This bit is '1' if the RSS field in this completion is valid. */ + #define RX_TPA_START_CMPL_FLAGS_RSS_VALID UINT32_C(0x400) + /* unused is 1 b */ + #define RX_TPA_START_CMPL_FLAGS_UNUSED UINT32_C(0x800) /* - * HWRM Command Completion: - * Completion of an HWRM command. + * This value indicates what the inner packet determined for the + * packet was. */ - #define HWRM_CMPL_TYPE_HWRM_DONE UINT32_C(0x20) - #define HWRM_CMPL_TYPE_LAST HWRM_CMPL_TYPE_HWRM_DONE - /* This is the sequence_id of the HWRM command that has completed. */ - uint16_t sequence_id; - /* unused2 is 32 b */ - uint32_t unused_1; - uint32_t v; + #define RX_TPA_START_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000) + #define RX_TPA_START_CMPL_FLAGS_ITYPE_SFT 12 /* - * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * TCP Packet: + * Indicates that the packet was IP and TCP. */ - #define HWRM_CMPL_V UINT32_C(0x1) - /* unused4 is 32 b */ - uint32_t unused_3; -} __attribute__((packed)); - -/* hwrm_fwd_req_cmpl (size:128b/16B) */ -struct hwrm_fwd_req_cmpl { + #define RX_TPA_START_CMPL_FLAGS_ITYPE_TCP \ + (UINT32_C(0x2) << 12) + #define RX_TPA_START_CMPL_FLAGS_ITYPE_LAST \ + RX_TPA_START_CMPL_FLAGS_ITYPE_TCP /* - * This field indicates the exact type of the completion. - * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B - * records. + * This value indicates the amount of packet data written to the + * buffer the opaque field in this completion corresponds to. */ - uint16_t req_len_type; + uint16_t len; /* - * This field indicates the exact type of the completion. - * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B - * records. + * This is a copy of the opaque field from the RX BD this completion + * corresponds to. */ - #define HWRM_FWD_REQ_CMPL_TYPE_MASK UINT32_C(0x3f) - #define HWRM_FWD_REQ_CMPL_TYPE_SFT 0 - /* Forwarded HWRM Request */ - #define HWRM_FWD_REQ_CMPL_TYPE_HWRM_FWD_REQ UINT32_C(0x22) - #define HWRM_FWD_REQ_CMPL_TYPE_LAST \ - HWRM_FWD_REQ_CMPL_TYPE_HWRM_FWD_REQ - /* Length of forwarded request in bytes. */ - #define HWRM_FWD_REQ_CMPL_REQ_LEN_MASK UINT32_C(0xffc0) - #define HWRM_FWD_REQ_CMPL_REQ_LEN_SFT 6 + uint32_t opaque; /* - * Source ID of this request. - * Typically used in forwarding requests and responses. - * 0x0 - 0xFFF8 - Used for function ids - * 0xFFF8 - 0xFFFE - Reserved for internal processors - * 0xFFFF - HWRM + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - uint16_t source_id; - /* unused1 is 32 b */ - uint32_t unused0; - /* Address of forwarded request. */ - uint32_t req_buf_addr_v[2]; + uint8_t v1; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - #define HWRM_FWD_REQ_CMPL_V UINT32_C(0x1) - /* Address of forwarded request. */ - #define HWRM_FWD_REQ_CMPL_REQ_BUF_ADDR_MASK UINT32_C(0xfffffffe) - #define HWRM_FWD_REQ_CMPL_REQ_BUF_ADDR_SFT 1 -} __attribute__((packed)); + #define RX_TPA_START_CMPL_V1 UINT32_C(0x1) + #define RX_TPA_START_CMPL_LAST RX_TPA_START_CMPL_V1 + /* + * This is the RSS hash type for the packet. The value is packed + * {tuple_extrac_op[1:0],rss_profile_id[4:0],tuple_extrac_op[2]}. + * + * The value of tuple_extrac_op provides the information about + * what fields the hash was computed on. + * * 0: The RSS hash was computed over source IP address, + * destination IP address, source port, and destination port of inner + * IP and TCP or UDP headers. Note: For non-tunneled packets, + * the packet headers are considered inner packet headers for the RSS + * hash computation purpose. + * * 1: The RSS hash was computed over source IP address and destination + * IP address of inner IP header. Note: For non-tunneled packets, + * the packet headers are considered inner packet headers for the RSS + * hash computation purpose. + * * 2: The RSS hash was computed over source IP address, + * destination IP address, source port, and destination port of + * IP and TCP or UDP headers of outer tunnel headers. + * Note: For non-tunneled packets, this value is not applicable. + * * 3: The RSS hash was computed over source IP address and + * destination IP address of IP header of outer tunnel headers. + * Note: For non-tunneled packets, this value is not applicable. + * + * Note that 4-tuples values listed above are applicable + * for layer 4 protocols supported and enabled for RSS in the hardware, + * HWRM firmware, and drivers. For example, if RSS hash is supported and + * enabled for TCP traffic only, then the values of tuple_extract_op + * corresponding to 4-tuples are only valid for TCP traffic. + */ + uint8_t rss_hash_type; + /* + * This is the aggregation ID that the completion is associated + * with. Use this number to correlate the TPA start completion + * with the TPA end completion. + */ + uint16_t agg_id; + /* unused2 is 9 b */ + #define RX_TPA_START_CMPL_UNUSED2_MASK UINT32_C(0x1ff) + #define RX_TPA_START_CMPL_UNUSED2_SFT 0 + /* + * This is the aggregation ID that the completion is associated + * with. Use this number to correlate the TPA start completion + * with the TPA end completion. + */ + #define RX_TPA_START_CMPL_AGG_ID_MASK UINT32_C(0xfe00) + #define RX_TPA_START_CMPL_AGG_ID_SFT 9 + /* + * This value is the RSS hash value calculated for the packet + * based on the mode bits and key value in the VNIC. + */ + uint32_t rss_hash; +} __rte_packed; -/* hwrm_fwd_resp_cmpl (size:128b/16B) */ -struct hwrm_fwd_resp_cmpl { - uint16_t type; +/* + * Last 16 bytes of rx_tpa_start_cmpl. + * + * This TPA completion structure is used on devices where the + * `hwrm_vnic_qcaps.max_aggs_supported` value is 0. + */ +/* rx_tpa_start_cmpl_hi (size:128b/16B) */ +struct rx_tpa_start_cmpl_hi { + uint32_t flags2; /* - * This field indicates the exact type of the completion. - * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B - * records. + * This indicates that the ip checksum was calculated for the + * inner packet and that the sum passed for all segments + * included in the aggregation. */ - #define HWRM_FWD_RESP_CMPL_TYPE_MASK UINT32_C(0x3f) - #define HWRM_FWD_RESP_CMPL_TYPE_SFT 0 - /* Forwarded HWRM Response */ - #define HWRM_FWD_RESP_CMPL_TYPE_HWRM_FWD_RESP UINT32_C(0x24) - #define HWRM_FWD_RESP_CMPL_TYPE_LAST \ - HWRM_FWD_RESP_CMPL_TYPE_HWRM_FWD_RESP + #define RX_TPA_START_CMPL_FLAGS2_IP_CS_CALC UINT32_C(0x1) /* - * Source ID of this response. - * Typically used in forwarding requests and responses. - * 0x0 - 0xFFF8 - Used for function ids - * 0xFFF8 - 0xFFFE - Reserved for internal processors - * 0xFFFF - HWRM + * This indicates that the TCP, UDP or ICMP checksum was + * calculated for the inner packet and that the sum passed + * for all segments included in the aggregation. */ - uint16_t source_id; - /* Length of forwarded response in bytes. */ - uint16_t resp_len; - /* unused2 is 16 b */ - uint16_t unused_1; - /* Address of forwarded request. */ - uint32_t resp_buf_addr_v[2]; + #define RX_TPA_START_CMPL_FLAGS2_L4_CS_CALC UINT32_C(0x2) + /* + * This indicates that the ip checksum was calculated for the + * tunnel header and that the sum passed for all segments + * included in the aggregation. + */ + #define RX_TPA_START_CMPL_FLAGS2_T_IP_CS_CALC UINT32_C(0x4) + /* + * This indicates that the UDP checksum was + * calculated for the tunnel packet and that the sum passed for + * all segments included in the aggregation. + */ + #define RX_TPA_START_CMPL_FLAGS2_T_L4_CS_CALC UINT32_C(0x8) + /* This value indicates what format the metadata field is. */ + #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_MASK UINT32_C(0xf0) + #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_SFT 4 + /* No metadata information. Value is zero. */ + #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_NONE \ + (UINT32_C(0x0) << 4) + /* + * The metadata field contains the VLAN tag and TPID value. + * - metadata[11:0] contains the vlan VID value. + * - metadata[12] contains the vlan DE value. + * - metadata[15:13] contains the vlan PRI value. + * - metadata[31:16] contains the vlan TPID value. + */ + #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_VLAN \ + (UINT32_C(0x1) << 4) + #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_LAST \ + RX_TPA_START_CMPL_FLAGS2_META_FORMAT_VLAN + /* + * This field indicates the IP type for the inner-most IP header. + * A value of '0' indicates IPv4. A value of '1' indicates IPv6. + */ + #define RX_TPA_START_CMPL_FLAGS2_IP_TYPE UINT32_C(0x100) + /* + * This is data from the CFA block as indicated by the meta_format + * field. + */ + uint32_t metadata; + /* When meta_format=1, this value is the VLAN VID. */ + #define RX_TPA_START_CMPL_METADATA_VID_MASK UINT32_C(0xfff) + #define RX_TPA_START_CMPL_METADATA_VID_SFT 0 + /* When meta_format=1, this value is the VLAN DE. */ + #define RX_TPA_START_CMPL_METADATA_DE UINT32_C(0x1000) + /* When meta_format=1, this value is the VLAN PRI. */ + #define RX_TPA_START_CMPL_METADATA_PRI_MASK UINT32_C(0xe000) + #define RX_TPA_START_CMPL_METADATA_PRI_SFT 13 + /* When meta_format=1, this value is the VLAN TPID. */ + #define RX_TPA_START_CMPL_METADATA_TPID_MASK UINT32_C(0xffff0000) + #define RX_TPA_START_CMPL_METADATA_TPID_SFT 16 + uint16_t v2; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - #define HWRM_FWD_RESP_CMPL_V UINT32_C(0x1) - /* Address of forwarded request. */ - #define HWRM_FWD_RESP_CMPL_RESP_BUF_ADDR_MASK UINT32_C(0xfffffffe) - #define HWRM_FWD_RESP_CMPL_RESP_BUF_ADDR_SFT 1 -} __attribute__((packed)); + #define RX_TPA_START_CMPL_V2 UINT32_C(0x1) + /* + * This field identifies the CFA action rule that was used for this + * packet. + */ + uint16_t cfa_code; + /* + * This is the size in bytes of the inner most L4 header. + * This can be subtracted from the payload_offset to determine + * the start of the inner most L4 header. + */ + uint32_t inner_l4_size_inner_l3_offset_inner_l2_offset_outer_l3_offset; + /* + * This is the offset from the beginning of the packet in bytes for + * the outer L3 header. If there is no outer L3 header, then this + * value is zero. + */ + #define RX_TPA_START_CMPL_OUTER_L3_OFFSET_MASK UINT32_C(0x1ff) + #define RX_TPA_START_CMPL_OUTER_L3_OFFSET_SFT 0 + /* + * This is the offset from the beginning of the packet in bytes for + * the inner most L2 header. + */ + #define RX_TPA_START_CMPL_INNER_L2_OFFSET_MASK UINT32_C(0x3fe00) + #define RX_TPA_START_CMPL_INNER_L2_OFFSET_SFT 9 + /* + * This is the offset from the beginning of the packet in bytes for + * the inner most L3 header. + */ + #define RX_TPA_START_CMPL_INNER_L3_OFFSET_MASK UINT32_C(0x7fc0000) + #define RX_TPA_START_CMPL_INNER_L3_OFFSET_SFT 18 + /* + * This is the size in bytes of the inner most L4 header. + * This can be subtracted from the payload_offset to determine + * the start of the inner most L4 header. + */ + #define RX_TPA_START_CMPL_INNER_L4_SIZE_MASK UINT32_C(0xf8000000) + #define RX_TPA_START_CMPL_INNER_L4_SIZE_SFT 27 +} __rte_packed; -/* hwrm_async_event_cmpl (size:128b/16B) */ -struct hwrm_async_event_cmpl { - uint16_t type; +/* + * This TPA completion structure is used on devices where the + * `hwrm_vnic_qcaps.max_aggs_supported` value is 0. + * RX L2 TPA Start V2 Completion Record (32 bytes split to 2 16-byte + * struct) + */ +/* rx_tpa_start_v2_cmpl (size:128b/16B) */ +struct rx_tpa_start_v2_cmpl { + uint16_t flags_type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ - #define HWRM_ASYNC_EVENT_CMPL_TYPE_MASK UINT32_C(0x3f) - #define HWRM_ASYNC_EVENT_CMPL_TYPE_SFT 0 - /* HWRM Asynchronous Event Information */ - #define HWRM_ASYNC_EVENT_CMPL_TYPE_HWRM_ASYNC_EVENT UINT32_C(0x2e) - #define HWRM_ASYNC_EVENT_CMPL_TYPE_LAST \ - HWRM_ASYNC_EVENT_CMPL_TYPE_HWRM_ASYNC_EVENT - /* Identifiers of events. */ - uint16_t event_id; - /* Link status changed */ - #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_STATUS_CHANGE \ - UINT32_C(0x0) - /* Link MTU changed */ - #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_MTU_CHANGE \ - UINT32_C(0x1) - /* Link speed changed */ - #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CHANGE \ - UINT32_C(0x2) - /* DCB Configuration changed */ - #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_DCB_CONFIG_CHANGE \ - UINT32_C(0x3) - /* Port connection not allowed */ - #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PORT_CONN_NOT_ALLOWED \ - UINT32_C(0x4) - /* Link speed configuration was not allowed */ - #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CFG_NOT_ALLOWED \ - UINT32_C(0x5) - /* Link speed configuration change */ - #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CFG_CHANGE \ - UINT32_C(0x6) - /* Port PHY configuration change */ - #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PORT_PHY_CFG_CHANGE \ - UINT32_C(0x7) - /* Reset notification to clients */ - #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_RESET_NOTIFY \ - UINT32_C(0x8) - /* Function driver unloaded */ - #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_DRVR_UNLOAD \ - UINT32_C(0x10) - /* Function driver loaded */ - #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_DRVR_LOAD \ - UINT32_C(0x11) - /* Function FLR related processing has completed */ - #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_FLR_PROC_CMPLT \ - UINT32_C(0x12) - /* PF driver unloaded */ - #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_DRVR_UNLOAD \ - UINT32_C(0x20) - /* PF driver loaded */ - #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_DRVR_LOAD \ - UINT32_C(0x21) - /* VF Function Level Reset (FLR) */ - #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_FLR \ - UINT32_C(0x30) - /* VF MAC Address Change */ - #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_MAC_ADDR_CHANGE \ - UINT32_C(0x31) - /* PF-VF communication channel status change. */ - #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_VF_COMM_STATUS_CHANGE \ - UINT32_C(0x32) - /* VF Configuration Change */ - #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_CFG_CHANGE \ - UINT32_C(0x33) - /* LLFC/PFC Configuration Change */ - #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LLFC_PFC_CHANGE \ - UINT32_C(0x34) - /* Default VNIC Configuration Change */ - #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_DEFAULT_VNIC_CHANGE \ - UINT32_C(0x35) - /* HWRM Error */ - #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_HWRM_ERROR \ - UINT32_C(0xff) - #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LAST \ - HWRM_ASYNC_EVENT_CMPL_EVENT_ID_HWRM_ERROR - /* Event specific data */ - uint32_t event_data2; - uint8_t opaque_v; + #define RX_TPA_START_V2_CMPL_TYPE_MASK \ + UINT32_C(0x3f) + #define RX_TPA_START_V2_CMPL_TYPE_SFT 0 /* - * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * RX L2 TPA Start V2 Completion: + * Completion at the beginning of a TPA operation. + * Length = 32B + * This is the new version of the RX_TPA_START completion used + * in SR2 and later chips. */ - #define HWRM_ASYNC_EVENT_CMPL_V UINT32_C(0x1) - /* opaque is 7 b */ - #define HWRM_ASYNC_EVENT_CMPL_OPAQUE_MASK UINT32_C(0xfe) - #define HWRM_ASYNC_EVENT_CMPL_OPAQUE_SFT 1 - /* 8-lsb timestamp from POR (100-msec resolution) */ - uint8_t timestamp_lo; - /* 16-lsb timestamp from POR (100-msec resolution) */ - uint16_t timestamp_hi; - /* Event specific data */ - uint32_t event_data1; -} __attribute__((packed)); - -/* hwrm_async_event_cmpl_link_status_change (size:128b/16B) */ -struct hwrm_async_event_cmpl_link_status_change { - uint16_t type; + #define RX_TPA_START_V2_CMPL_TYPE_RX_TPA_START_V2 \ + UINT32_C(0xd) + #define RX_TPA_START_V2_CMPL_TYPE_LAST \ + RX_TPA_START_V2_CMPL_TYPE_RX_TPA_START_V2 + #define RX_TPA_START_V2_CMPL_FLAGS_MASK \ + UINT32_C(0xffc0) + #define RX_TPA_START_V2_CMPL_FLAGS_SFT 6 /* - * This field indicates the exact type of the completion. - * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B - * records. + * When this bit is '1', it indicates a packet that has an error + * of some type. Type of error is indicated in error_flags. */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_TYPE_MASK \ - UINT32_C(0x3f) - #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_TYPE_SFT 0 - /* HWRM Asynchronous Event Information */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_TYPE_HWRM_ASYNC_EVENT \ - UINT32_C(0x2e) - #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_TYPE_LAST \ - HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_TYPE_HWRM_ASYNC_EVENT - /* Identifiers of events. */ - uint16_t event_id; - /* Link status changed */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_ID_LINK_STATUS_CHANGE \ - UINT32_C(0x0) - #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_ID_LAST \ - HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_ID_LINK_STATUS_CHANGE - /* Event specific data */ - uint32_t event_data2; - uint8_t opaque_v; + #define RX_TPA_START_V2_CMPL_FLAGS_ERROR \ + UINT32_C(0x40) + /* This field indicates how the packet was placed in the buffer. */ + #define RX_TPA_START_V2_CMPL_FLAGS_PLACEMENT_MASK \ + UINT32_C(0x380) + #define RX_TPA_START_V2_CMPL_FLAGS_PLACEMENT_SFT 7 /* - * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * Jumbo: + * TPA Packet was placed using jumbo algorithm. This means + * that the first buffer will be filled with data before + * moving to aggregation buffers. Each aggregation buffer + * will be filled before moving to the next aggregation + * buffer. */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_V \ - UINT32_C(0x1) - /* opaque is 7 b */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_OPAQUE_MASK \ - UINT32_C(0xfe) - #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_OPAQUE_SFT 1 - /* 8-lsb timestamp from POR (100-msec resolution) */ - uint8_t timestamp_lo; - /* 16-lsb timestamp from POR (100-msec resolution) */ - uint16_t timestamp_hi; - /* Event specific data */ - uint32_t event_data1; - /* Indicates link status change */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_LINK_CHANGE \ - UINT32_C(0x1) + #define RX_TPA_START_V2_CMPL_FLAGS_PLACEMENT_JUMBO \ + (UINT32_C(0x1) << 7) /* - * If this bit set to 0, then it indicates that the link - * was up and it went down. + * Header/Data Separation: + * Packet was placed using Header/Data separation algorithm. + * The separation location is indicated by the itype field. */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_LINK_CHANGE_DOWN \ - UINT32_C(0x0) + #define RX_TPA_START_V2_CMPL_FLAGS_PLACEMENT_HDS \ + (UINT32_C(0x2) << 7) /* - * If this bit is set to 1, then it indicates that the link - * was down and it went up. + * IOC/Jumbo: + * Packet will be placed using In-Order Completion/Jumbo where + * the first packet of the aggregation is placed using Jumbo + * Placement. Subsequent packets will be placed such that each + * packet starts at the beginning of an aggregation buffer. */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_LINK_CHANGE_UP \ - UINT32_C(0x1) - #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_LINK_CHANGE_LAST \ - HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_LINK_CHANGE_UP - /* Indicates the physical port this link status change occur */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PORT_MASK \ - UINT32_C(0xe) - #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PORT_SFT \ - 1 - /* PORT ID */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PORT_ID_MASK \ - UINT32_C(0xffff0) - #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PORT_ID_SFT \ - 4 - /* Indicates the physical function this event occured on. */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PF_ID_MASK \ - UINT32_C(0xff00000) - #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PF_ID_SFT \ - 20 -} __attribute__((packed)); - -/* hwrm_async_event_cmpl_link_mtu_change (size:128b/16B) */ -struct hwrm_async_event_cmpl_link_mtu_change { - uint16_t type; + #define RX_TPA_START_V2_CMPL_FLAGS_PLACEMENT_IOC_JUMBO \ + (UINT32_C(0x4) << 7) /* - * This field indicates the exact type of the completion. - * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B - * records. + * GRO/Jumbo: + * Packet will be placed using GRO/Jumbo where the first + * packet is filled with data. Subsequent packets will be + * placed such that any one packet does not span two + * aggregation buffers unless it starts at the beginning of + * an aggregation buffer. */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_MASK \ - UINT32_C(0x3f) - #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_SFT 0 - /* HWRM Asynchronous Event Information */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_HWRM_ASYNC_EVENT \ - UINT32_C(0x2e) - #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_LAST \ - HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_HWRM_ASYNC_EVENT - /* Identifiers of events. */ - uint16_t event_id; - /* Link MTU changed */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_ID_LINK_MTU_CHANGE \ - UINT32_C(0x1) - #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_ID_LAST \ - HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_ID_LINK_MTU_CHANGE - /* Event specific data */ - uint32_t event_data2; - uint8_t opaque_v; + #define RX_TPA_START_V2_CMPL_FLAGS_PLACEMENT_GRO_JUMBO \ + (UINT32_C(0x5) << 7) /* - * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * GRO/Header-Data Separation: + * Packet will be placed using GRO/HDS where the header + * is in the first packet. + * Payload of each packet will be + * placed such that any one packet does not span two + * aggregation buffers unless it starts at the beginning of + * an aggregation buffer. */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_V UINT32_C(0x1) - /* opaque is 7 b */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_OPAQUE_MASK \ - UINT32_C(0xfe) - #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_OPAQUE_SFT 1 - /* 8-lsb timestamp from POR (100-msec resolution) */ - uint8_t timestamp_lo; - /* 16-lsb timestamp from POR (100-msec resolution) */ - uint16_t timestamp_hi; - /* Event specific data */ - uint32_t event_data1; - /* The new MTU of the link in bytes. */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_DATA1_NEW_MTU_MASK \ - UINT32_C(0xffff) - #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_DATA1_NEW_MTU_SFT 0 -} __attribute__((packed)); - -/* hwrm_async_event_cmpl_link_speed_change (size:128b/16B) */ -struct hwrm_async_event_cmpl_link_speed_change { - uint16_t type; + #define RX_TPA_START_V2_CMPL_FLAGS_PLACEMENT_GRO_HDS \ + (UINT32_C(0x6) << 7) /* - * This field indicates the exact type of the completion. - * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B - * records. + * IOC/Header-Data Separation: + * Packet will be placed using In-Order Completion/HDS where + * the header is in the first packet buffer. Payload of each + * packet will be placed such that each packet starts at the + * beginning of an aggregation buffer. */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_TYPE_MASK \ - UINT32_C(0x3f) - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_TYPE_SFT 0 - /* HWRM Asynchronous Event Information */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_TYPE_HWRM_ASYNC_EVENT \ - UINT32_C(0x2e) - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_TYPE_LAST \ - HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_TYPE_HWRM_ASYNC_EVENT - /* Identifiers of events. */ - uint16_t event_id; - /* Link speed changed */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_ID_LINK_SPEED_CHANGE \ - UINT32_C(0x2) - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_ID_LAST \ - HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_ID_LINK_SPEED_CHANGE - /* Event specific data */ - uint32_t event_data2; - uint8_t opaque_v; + #define RX_TPA_START_V2_CMPL_FLAGS_PLACEMENT_IOC_HDS \ + (UINT32_C(0x7) << 7) + #define RX_TPA_START_V2_CMPL_FLAGS_PLACEMENT_LAST \ + RX_TPA_START_V2_CMPL_FLAGS_PLACEMENT_IOC_HDS + /* This bit is '1' if the RSS field in this completion is valid. */ + #define RX_TPA_START_V2_CMPL_FLAGS_RSS_VALID \ + UINT32_C(0x400) /* - * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * This bit is '1' if metadata has been added to the end of the + * packet in host memory. Metadata starts at the first 32B boundary + * after the end of the packet for regular and jumbo placement. It + * starts at the first 32B boundary after the end of the header for + * HDS placement. The length of the metadata is indicated in the + * metadata itself. */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_V \ - UINT32_C(0x1) - /* opaque is 7 b */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_OPAQUE_MASK \ - UINT32_C(0xfe) - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_OPAQUE_SFT 1 - /* 8-lsb timestamp from POR (100-msec resolution) */ - uint8_t timestamp_lo; - /* 16-lsb timestamp from POR (100-msec resolution) */ - uint16_t timestamp_hi; - /* Event specific data */ - uint32_t event_data1; + #define RX_TPA_START_V2_CMPL_FLAGS_PKT_METADATA_PRESENT \ + UINT32_C(0x800) /* - * When this bit is '1', the link was forced to the - * force_link_speed value. + * This value indicates what the inner packet determined for the + * packet was. */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_FORCE \ - UINT32_C(0x1) - /* The new link speed in 100 Mbps units. */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_MASK \ - UINT32_C(0xfffe) - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_SFT \ - 1 - /* 100Mb link speed */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_100MB \ - (UINT32_C(0x1) << 1) - /* 1Gb link speed */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_1GB \ - (UINT32_C(0xa) << 1) - /* 2Gb link speed */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_2GB \ - (UINT32_C(0x14) << 1) - /* 25Gb link speed */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_2_5GB \ - (UINT32_C(0x19) << 1) - /* 10Gb link speed */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_10GB \ - (UINT32_C(0x64) << 1) - /* 20Mb link speed */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_20GB \ - (UINT32_C(0xc8) << 1) - /* 25Gb link speed */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_25GB \ - (UINT32_C(0xfa) << 1) - /* 40Gb link speed */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_40GB \ - (UINT32_C(0x190) << 1) - /* 50Gb link speed */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_50GB \ - (UINT32_C(0x1f4) << 1) - /* 100Gb link speed */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_100GB \ - (UINT32_C(0x3e8) << 1) - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_LAST \ - HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_100GB - /* PORT ID */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_PORT_ID_MASK \ - UINT32_C(0xffff0000) - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_PORT_ID_SFT \ - 16 -} __attribute__((packed)); - -/* hwrm_async_event_cmpl_dcb_config_change (size:128b/16B) */ -struct hwrm_async_event_cmpl_dcb_config_change { - uint16_t type; + #define RX_TPA_START_V2_CMPL_FLAGS_ITYPE_MASK \ + UINT32_C(0xf000) + #define RX_TPA_START_V2_CMPL_FLAGS_ITYPE_SFT 12 /* - * This field indicates the exact type of the completion. - * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B - * records. + * TCP Packet: + * Indicates that the packet was IP and TCP. */ - #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_MASK \ - UINT32_C(0x3f) - #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_SFT 0 - /* HWRM Asynchronous Event Information */ - #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_HWRM_ASYNC_EVENT \ - UINT32_C(0x2e) - #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_LAST \ - HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_HWRM_ASYNC_EVENT - /* Identifiers of events. */ - uint16_t event_id; - /* DCB Configuration changed */ - #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_ID_DCB_CONFIG_CHANGE \ - UINT32_C(0x3) - #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_ID_LAST \ - HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_ID_DCB_CONFIG_CHANGE - /* Event specific data */ - uint32_t event_data2; - /* ETS configuration change */ - #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA2_ETS \ - UINT32_C(0x1) - /* PFC configuration change */ - #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA2_PFC \ - UINT32_C(0x2) - /* APP configuration change */ - #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA2_APP \ - UINT32_C(0x4) - uint8_t opaque_v; + #define RX_TPA_START_V2_CMPL_FLAGS_ITYPE_TCP \ + (UINT32_C(0x2) << 12) + #define RX_TPA_START_V2_CMPL_FLAGS_ITYPE_LAST \ + RX_TPA_START_V2_CMPL_FLAGS_ITYPE_TCP /* - * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * This value indicates the amount of packet data written to the + * buffer the opaque field in this completion corresponds to. */ - #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_V \ - UINT32_C(0x1) - /* opaque is 7 b */ - #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_OPAQUE_MASK \ - UINT32_C(0xfe) - #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_OPAQUE_SFT 1 - /* 8-lsb timestamp from POR (100-msec resolution) */ - uint8_t timestamp_lo; - /* 16-lsb timestamp from POR (100-msec resolution) */ - uint16_t timestamp_hi; - /* Event specific data */ - uint32_t event_data1; - /* PORT ID */ - #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_PORT_ID_MASK \ - UINT32_C(0xffff) - #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_PORT_ID_SFT \ - 0 - /* Priority recommended for RoCE traffic */ - #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_ROCE_PRIORITY_MASK \ - UINT32_C(0xff0000) - #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_ROCE_PRIORITY_SFT \ - 16 - /* none is 255 */ - #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_ROCE_PRIORITY_NONE \ - (UINT32_C(0xff) << 16) - #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_ROCE_PRIORITY_LAST \ - HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_ROCE_PRIORITY_NONE - /* Priority recommended for L2 traffic */ - #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_L2_PRIORITY_MASK \ - UINT32_C(0xff000000) - #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_L2_PRIORITY_SFT \ - 24 - /* none is 255 */ - #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_L2_PRIORITY_NONE \ - (UINT32_C(0xff) << 24) - #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_L2_PRIORITY_LAST \ - HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_L2_PRIORITY_NONE -} __attribute__((packed)); - -/* hwrm_async_event_cmpl_port_conn_not_allowed (size:128b/16B) */ -struct hwrm_async_event_cmpl_port_conn_not_allowed { - uint16_t type; + uint16_t len; /* - * This field indicates the exact type of the completion. - * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B - * records. + * This is a copy of the opaque field from the RX BD this completion + * corresponds to. If the VNIC is configured to not use an Rx BD for + * the TPA Start completion, then this is a copy of the opaque field + * from the first BD used to place the TPA Start packet. */ - #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_MASK \ - UINT32_C(0x3f) - #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_SFT \ - 0 - /* HWRM Asynchronous Event Information */ - #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_HWRM_ASYNC_EVENT \ - UINT32_C(0x2e) - #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_LAST \ - HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_HWRM_ASYNC_EVENT - /* Identifiers of events. */ - uint16_t event_id; - /* Port connection not allowed */ - #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_ID_PORT_CONN_NOT_ALLOWED \ - UINT32_C(0x4) - #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_ID_LAST \ - HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_ID_PORT_CONN_NOT_ALLOWED - /* Event specific data */ - uint32_t event_data2; - uint8_t opaque_v; + uint32_t opaque; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_V \ - UINT32_C(0x1) - /* opaque is 7 b */ - #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_OPAQUE_MASK \ - UINT32_C(0xfe) - #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_OPAQUE_SFT 1 - /* 8-lsb timestamp from POR (100-msec resolution) */ - uint8_t timestamp_lo; - /* 16-lsb timestamp from POR (100-msec resolution) */ - uint16_t timestamp_hi; - /* Event specific data */ - uint32_t event_data1; - /* PORT ID */ - #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_PORT_ID_MASK \ - UINT32_C(0xffff) - #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_PORT_ID_SFT \ - 0 + uint8_t v1; /* - * This value indicates the current port level enforcement policy - * for the optics module when there is an optical module mismatch - * and port is not connected. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_MASK \ - UINT32_C(0xff0000) - #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_SFT \ - 16 - /* No enforcement */ - #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_NONE \ - (UINT32_C(0x0) << 16) - /* Disable Transmit side Laser. */ - #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_DISABLETX \ - (UINT32_C(0x1) << 16) - /* Raise a warning message. */ - #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_WARNINGMSG \ - (UINT32_C(0x2) << 16) - /* Power down the module. */ - #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_PWRDOWN \ - (UINT32_C(0x3) << 16) - #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_LAST \ - HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_PWRDOWN -} __attribute__((packed)); - -/* hwrm_async_event_cmpl_link_speed_cfg_not_allowed (size:128b/16B) */ -struct hwrm_async_event_cmpl_link_speed_cfg_not_allowed { - uint16_t type; + #define RX_TPA_START_V2_CMPL_V1 UINT32_C(0x1) + #define RX_TPA_START_V2_CMPL_LAST RX_TPA_START_V2_CMPL_V1 /* - * This field indicates the exact type of the completion. - * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B - * records. + * This is the RSS hash type for the packet. The value is packed + * {tuple_extrac_op[1:0],rss_profile_id[4:0],tuple_extrac_op[2]}. + * + * The value of tuple_extrac_op provides the information about + * what fields the hash was computed on. + * * 0: The RSS hash was computed over source IP address, + * destination IP address, source port, and destination port of inner + * IP and TCP or UDP headers. Note: For non-tunneled packets, + * the packet headers are considered inner packet headers for the RSS + * hash computation purpose. + * * 1: The RSS hash was computed over source IP address and destination + * IP address of inner IP header. Note: For non-tunneled packets, + * the packet headers are considered inner packet headers for the RSS + * hash computation purpose. + * * 2: The RSS hash was computed over source IP address, + * destination IP address, source port, and destination port of + * IP and TCP or UDP headers of outer tunnel headers. + * Note: For non-tunneled packets, this value is not applicable. + * * 3: The RSS hash was computed over source IP address and + * destination IP address of IP header of outer tunnel headers. + * Note: For non-tunneled packets, this value is not applicable. + * + * Note that 4-tuples values listed above are applicable + * for layer 4 protocols supported and enabled for RSS in the hardware, + * HWRM firmware, and drivers. For example, if RSS hash is supported and + * enabled for TCP traffic only, then the values of tuple_extract_op + * corresponding to 4-tuples are only valid for TCP traffic. */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_MASK \ - UINT32_C(0x3f) - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_SFT \ - 0 - /* HWRM Asynchronous Event Information */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_HWRM_ASYNC_EVENT \ - UINT32_C(0x2e) - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_LAST \ - HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_HWRM_ASYNC_EVENT - /* Identifiers of events. */ - uint16_t event_id; - /* Link speed configuration was not allowed */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_ID_LINK_SPEED_CFG_NOT_ALLOWED \ - UINT32_C(0x5) - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_ID_LAST \ - HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_ID_LINK_SPEED_CFG_NOT_ALLOWED - /* Event specific data */ - uint32_t event_data2; - uint8_t opaque_v; + uint8_t rss_hash_type; /* - * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * This is the aggregation ID that the completion is associated + * with. Use this number to correlate the TPA start completion + * with the TPA end completion. */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_V \ - UINT32_C(0x1) - /* opaque is 7 b */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_OPAQUE_MASK \ - UINT32_C(0xfe) - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_OPAQUE_SFT 1 - /* 8-lsb timestamp from POR (100-msec resolution) */ - uint8_t timestamp_lo; - /* 16-lsb timestamp from POR (100-msec resolution) */ - uint16_t timestamp_hi; - /* Event specific data */ - uint32_t event_data1; - /* PORT ID */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_DATA1_PORT_ID_MASK \ - UINT32_C(0xffff) - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_DATA1_PORT_ID_SFT \ - 0 -} __attribute__((packed)); - -/* hwrm_async_event_cmpl_link_speed_cfg_change (size:128b/16B) */ -struct hwrm_async_event_cmpl_link_speed_cfg_change { - uint16_t type; + uint16_t agg_id; /* - * This field indicates the exact type of the completion. - * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B - * records. + * This is the aggregation ID that the completion is associated + * with. Use this number to correlate the TPA start completion + * with the TPA end completion. */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_MASK \ - UINT32_C(0x3f) - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_SFT \ - 0 - /* HWRM Asynchronous Event Information */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT \ - UINT32_C(0x2e) - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_LAST \ - HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT - /* Identifiers of events. */ - uint16_t event_id; - /* Link speed configuration change */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_ID_LINK_SPEED_CFG_CHANGE \ - UINT32_C(0x6) - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_ID_LAST \ - HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_ID_LINK_SPEED_CFG_CHANGE - /* Event specific data */ - uint32_t event_data2; - uint8_t opaque_v; + #define RX_TPA_START_V2_CMPL_AGG_ID_MASK UINT32_C(0xfff) + #define RX_TPA_START_V2_CMPL_AGG_ID_SFT 0 + #define RX_TPA_START_V2_CMPL_METADATA1_MASK UINT32_C(0xf000) + #define RX_TPA_START_V2_CMPL_METADATA1_SFT 12 + /* When meta_format != 0, this value is the VLAN TPID_SEL. */ + #define RX_TPA_START_V2_CMPL_METADATA1_TPID_SEL_MASK UINT32_C(0x7000) + #define RX_TPA_START_V2_CMPL_METADATA1_TPID_SEL_SFT 12 + /* When meta_format != 0, this value is the VLAN valid. */ + #define RX_TPA_START_V2_CMPL_METADATA1_VALID UINT32_C(0x8000) /* - * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * This value is the RSS hash value calculated for the packet + * based on the mode bits and key value in the VNIC. + * When vee_cmpl_mode is set in VNIC context, this is the lower + * 32b of the host address from the first BD used to place the packet. */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_V \ - UINT32_C(0x1) - /* opaque is 7 b */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_OPAQUE_MASK \ - UINT32_C(0xfe) - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_OPAQUE_SFT 1 - /* 8-lsb timestamp from POR (100-msec resolution) */ - uint8_t timestamp_lo; - /* 16-lsb timestamp from POR (100-msec resolution) */ - uint16_t timestamp_hi; - /* Event specific data */ - uint32_t event_data1; - /* PORT ID */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_DATA1_PORT_ID_MASK \ - UINT32_C(0xffff) - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_DATA1_PORT_ID_SFT \ - 0 + uint32_t rss_hash; +} __rte_packed; + +/* + * Last 16 bytes of RX L2 TPA Start V2 Completion Record + * + * This TPA completion structure is used on devices where the + * `hwrm_vnic_qcaps.max_aggs_supported` value is 0. + */ +/* rx_tpa_start_v2_cmpl_hi (size:128b/16B) */ +struct rx_tpa_start_v2_cmpl_hi { + uint32_t flags2; + /* This indicates that the aggregation was done using GRO rules. */ + #define RX_TPA_START_V2_CMPL_FLAGS2_AGG_GRO \ + UINT32_C(0x4) /* - * If set to 1, it indicates that the supported link speeds - * configuration on the port has changed. - * If set to 0, then there is no change in supported link speeds - * configuration. + * When this bit is '0', the cs_ok field has the following definition:- + * ip_cs_ok[2:0] = The number of header groups with a valid IP checksum + * in the delivered packet, counted from the outer-most header group to + * the inner-most header group, stopping at the first error. - + * l4_cs_ok[5:3] = The number of header groups with a valid L4 checksum + * in the delivered packet, counted from the outer-most header group to + * the inner-most header group, stopping at the first error. When this + * bit is '1', the cs_ok field has the following definition: - + * hdr_cnt[2:0] = The number of header groups that were parsed by the + * chip and passed in the delivered packet. - ip_cs_all_ok[3] =This bit + * will be '1' if all the parsed header groups with an IP checksum are + * valid. - l4_cs_all_ok[4] = This bit will be '1' if all the parsed + * header groups with an L4 checksum are valid. + */ + #define RX_TPA_START_V2_CMPL_FLAGS2_CS_ALL_OK_MODE \ + UINT32_C(0x8) + /* This value indicates what format the metadata field is. */ + #define RX_TPA_START_V2_CMPL_FLAGS2_META_FORMAT_MASK \ + UINT32_C(0xf0) + #define RX_TPA_START_V2_CMPL_FLAGS2_META_FORMAT_SFT 4 + /* There is no metadata information. Values are zero. */ + #define RX_TPA_START_V2_CMPL_FLAGS2_META_FORMAT_NONE \ + (UINT32_C(0x0) << 4) + /* + * The {metadata1, metadata0} fields contain the vtag + * information: - vtag[19:0] = {valid, tpid_sel[2:0], pri[2:0], + * de, vid[11:0]} The metadata2 field contains the table scope + * and action record pointer. - metadata2[25:0] contains the + * action record pointer. - metadata2[31:26] contains the table + * scope. */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_DATA1_SUPPORTED_LINK_SPEEDS_CHANGE \ - UINT32_C(0x10000) + #define RX_TPA_START_V2_CMPL_FLAGS2_META_FORMAT_ACT_REC_PTR \ + (UINT32_C(0x1) << 4) /* - * If set to 1, it indicates that the link speed configuration - * on the port has become illegal or invalid. - * If set to 0, then the link speed configuration on the port is - * legal or valid. + * The {metadata1, metadata0} fields contain the vtag + * information: + * - vtag[19:0] = {valid, tpid_sel[2:0], pri[2:0], de, vid[11:0]} + * The metadata2 field contains the Tunnel ID + * value, justified to LSB. i + * - VXLAN = VNI[23:0] -> VXLAN Network ID + * - Geneve (NGE) = VNI[23:0] a-> Virtual Network Identifier + * - NVGRE = TNI[23:0] -> Tenant Network ID + * - GRE = KEY[31:0] -> key field with bit mask. zero if K=0 + * - IPv4 = 0 (not populated) + * - IPv6 = Flow Label[19:0] + * - PPPoE = sessionID[15:0] + * - MPLs = Outer label[19:0] + * - UPAR = Selected[31:0] with bit mask + */ + #define RX_TPA_START_V2_CMPL_FLAGS2_META_FORMAT_TUNNEL_ID \ + (UINT32_C(0x2) << 4) + /* + * The {metadata1, metadata0} fields contain the vtag + * information: + * - vtag[19:0] = {valid, tpid_sel[2:0], pri[2:0],de, vid[11:0]} + * The metadata2 field contains the 32b metadata from the prepended + * header (chdr_data). */ - #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_DATA1_ILLEGAL_LINK_SPEED_CFG \ - UINT32_C(0x20000) -} __attribute__((packed)); - -/* hwrm_async_event_cmpl_port_phy_cfg_change (size:128b/16B) */ -struct hwrm_async_event_cmpl_port_phy_cfg_change { - uint16_t type; + #define RX_TPA_START_V2_CMPL_FLAGS2_META_FORMAT_CHDR_DATA \ + (UINT32_C(0x3) << 4) /* - * This field indicates the exact type of the completion. - * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B - * records. + * The {metadata1, metadata0} fields contain the vtag + * information: + * - vtag[19:0] = {valid, tpid_sel[2:0], pri[2:0], de, vid[11:0]} + * The metadata2 field contains the outer_l3_offset, + * inner_l2_offset, inner_l3_offset, and inner_l4_size. + * - metadata2[8:0] contains the outer_l3_offset. + * - metadata2[17:9] contains the inner_l2_offset. + * - metadata2[26:18] contains the inner_l3_offset. + * - metadata2[31:27] contains the inner_l4_size. + */ + #define RX_TPA_START_V2_CMPL_FLAGS2_META_FORMAT_HDR_OFFSET \ + (UINT32_C(0x4) << 4) + #define RX_TPA_START_V2_CMPL_FLAGS2_META_FORMAT_LAST \ + RX_TPA_START_V2_CMPL_FLAGS2_META_FORMAT_HDR_OFFSET + /* + * This field indicates the IP type for the inner-most IP header. + * A value of '0' indicates IPv4. A value of '1' indicates IPv6. + * This value is only valid if itype indicates a packet + * with an IP header. */ - #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_MASK \ - UINT32_C(0x3f) - #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_SFT \ - 0 - /* HWRM Asynchronous Event Information */ - #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT \ - UINT32_C(0x2e) - #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_LAST \ - HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT - /* Identifiers of events. */ - uint16_t event_id; - /* Port PHY configuration change */ - #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_ID_PORT_PHY_CFG_CHANGE \ - UINT32_C(0x7) - #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_ID_LAST \ - HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_ID_PORT_PHY_CFG_CHANGE - /* Event specific data */ - uint32_t event_data2; - uint8_t opaque_v; + #define RX_TPA_START_V2_CMPL_FLAGS2_IP_TYPE \ + UINT32_C(0x100) + /* + * This indicates that the complete 1's complement checksum was + * calculated for the packet in the affregation. + */ + #define RX_TPA_START_V2_CMPL_FLAGS2_COMPLETE_CHECKSUM_CALC \ + UINT32_C(0x200) + /* + * This field indicates the status of IP and L4 CS calculations done + * by the chip. The format of this field is indicated by the + * cs_all_ok_mode bit. + * CS status for TPA packets is always valid. This means that "all_ok" + * status will always be set. The ok count status will be set + * appropriately for the packet header, such that all existing CS + * values are ok. + */ + #define RX_TPA_START_V2_CMPL_FLAGS2_CS_OK_MASK \ + UINT32_C(0xfc00) + #define RX_TPA_START_V2_CMPL_FLAGS2_CS_OK_SFT 10 + /* + * This value is the complete 1's complement checksum calculated from + * the start of the outer L3 header to the end of the packet (not + * including the ethernet crc). It is valid when the + * 'complete_checksum_calc' flag is set. For TPA Start completions, + * the complete checksum is calculated for the first packet in the + * aggregation only. + */ + #define RX_TPA_START_V2_CMPL_FLAGS2_COMPLETE_CHECKSUM_MASK \ + UINT32_C(0xffff0000) + #define RX_TPA_START_V2_CMPL_FLAGS2_COMPLETE_CHECKSUM_SFT 16 + /* + * This is data from the CFA block as indicated by the meta_format + * field. + * - meta_format 0 - none - metadata2 = 0 - not valid/not stripped + * - meta_format 1 - act_rec_ptr - metadata2 = {table_scope[5:0], + * act_rec_ptr[25:0]} + * - meta_format 2 - tunnel_id - metadata2 = tunnel_id[31:0] + * - meta_format 3 - chdr_data - metadata2 = updated_chdr_data[31:0] + * - meta_format 4 - hdr_offsets - metadata2 = hdr_offsets[31:0] + * When vee_cmpl_mode is set in VNIC context, this is the upper 32b + * of the host address from the first BD used to place the packet. + */ + uint32_t metadata2; + uint16_t errors_v2; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_V \ + #define RX_TPA_START_V2_CMPL_V2 \ UINT32_C(0x1) - /* opaque is 7 b */ - #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_OPAQUE_MASK \ - UINT32_C(0xfe) - #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_OPAQUE_SFT 1 - /* 8-lsb timestamp from POR (100-msec resolution) */ - uint8_t timestamp_lo; - /* 16-lsb timestamp from POR (100-msec resolution) */ - uint16_t timestamp_hi; - /* Event specific data */ - uint32_t event_data1; - /* PORT ID */ - #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_PORT_ID_MASK \ - UINT32_C(0xffff) - #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_PORT_ID_SFT \ - 0 + #define RX_TPA_START_V2_CMPL_ERRORS_MASK \ + UINT32_C(0xfffe) + #define RX_TPA_START_V2_CMPL_ERRORS_SFT 1 /* - * If set to 1, it indicates that the FEC - * configuration on the port has changed. - * If set to 0, then there is no change in FEC configuration. + * This error indicates that there was some sort of problem with + * the BDs for the packetThe packet should be treated as + * invalid. */ - #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_FEC_CFG_CHANGE \ - UINT32_C(0x10000) + #define RX_TPA_START_V2_CMPL_ERRORS_BUFFER_ERROR_MASK \ + UINT32_C(0xe) + #define RX_TPA_START_V2_CMPL_ERRORS_BUFFER_ERROR_SFT 1 + /* No buffer error */ + #define RX_TPA_START_V2_CMPL_ERRORS_BUFFER_ERROR_NO_BUFFER \ + (UINT32_C(0x0) << 1) /* - * If set to 1, it indicates that the EEE configuration - * on the port has changed. - * If set to 0, then there is no change in EEE configuration - * on the port. + * Did Not Fit: + * Packet did not fit into packet buffer provided. This means + * that the TPA Start packet was too big to be placed into the + * per-packet maximum number of physical buffers configured for + * the VNIC, or that it was too big to be placed into the + * per-aggregation maximum number of physical buffers configured + * for the VNIC. This error only occurs when the VNIC is + * configured for variable size receive buffers. + */ + #define RX_TPA_START_V2_CMPL_ERRORS_BUFFER_ERROR_DID_NOT_FIT \ + (UINT32_C(0x1) << 1) + /* + * Bad Format: + * BDs were not formatted correctly. */ - #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_EEE_CFG_CHANGE \ - UINT32_C(0x20000) + #define RX_TPA_START_V2_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT \ + (UINT32_C(0x3) << 1) /* - * If set to 1, it indicates that the pause configuration - * on the PHY has changed. - * If set to 0, then there is no change in the pause - * configuration on the PHY. + * Flush: + * There was a bad_format error on the previous operation */ - #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_PAUSE_CFG_CHANGE \ - UINT32_C(0x40000) -} __attribute__((packed)); + #define RX_TPA_START_V2_CMPL_ERRORS_BUFFER_ERROR_FLUSH \ + (UINT32_C(0x5) << 1) + #define RX_TPA_START_V2_CMPL_ERRORS_BUFFER_ERROR_LAST \ + RX_TPA_START_V2_CMPL_ERRORS_BUFFER_ERROR_FLUSH + /* + * This is data from the CFA block as indicated by the meta_format + * field. + */ + uint16_t metadata0; + /* When meta_format != 0, this value is the VLAN VID. */ + #define RX_TPA_START_V2_CMPL_METADATA0_VID_MASK UINT32_C(0xfff) + #define RX_TPA_START_V2_CMPL_METADATA0_VID_SFT 0 + /* When meta_format != 0, this value is the VLAN DE. */ + #define RX_TPA_START_V2_CMPL_METADATA0_DE UINT32_C(0x1000) + /* When meta_format != 0, this value is the VLAN PRI. */ + #define RX_TPA_START_V2_CMPL_METADATA0_PRI_MASK UINT32_C(0xe000) + #define RX_TPA_START_V2_CMPL_METADATA0_PRI_SFT 13 + /* + * This field contains the outer_l3_offset, inner_l2_offset, + * inner_l3_offset, and inner_l4_size. + * + * hdr_offsets[8:0] contains the outer_l3_offset. + * hdr_offsets[17:9] contains the inner_l2_offset. + * hdr_offsets[26:18] contains the inner_l3_offset. + * hdr_offsets[31:27] contains the inner_l4_size. + */ + uint32_t hdr_offsets; +} __rte_packed; -/* hwrm_async_event_cmpl_reset_notify (size:128b/16B) */ -struct hwrm_async_event_cmpl_reset_notify { - uint16_t type; +/* + * This TPA completion structure is used on devices where the + * `hwrm_vnic_qcaps.max_aggs_supported` value is 0. + */ +/* rx_tpa_end_cmpl (size:128b/16B) */ +struct rx_tpa_end_cmpl { + uint16_t flags_type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ - #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_TYPE_MASK \ - UINT32_C(0x3f) - #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_TYPE_SFT 0 - /* HWRM Asynchronous Event Information */ - #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_TYPE_HWRM_ASYNC_EVENT \ - UINT32_C(0x2e) - #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_TYPE_LAST \ - HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_TYPE_HWRM_ASYNC_EVENT - /* Identifiers of events. */ - uint16_t event_id; - /* Notify clients of imminent reset. */ - #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_ID_RESET_NOTIFY \ - UINT32_C(0x8) - #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_ID_LAST \ - HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_ID_RESET_NOTIFY - /* Event specific data */ - uint32_t event_data2; - uint8_t opaque_v; + #define RX_TPA_END_CMPL_TYPE_MASK UINT32_C(0x3f) + #define RX_TPA_END_CMPL_TYPE_SFT 0 /* - * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * RX L2 TPA End Completion: + * Completion at the end of a TPA operation. + * Length = 32B */ - #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_V UINT32_C(0x1) - /* opaque is 7 b */ - #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_OPAQUE_MASK UINT32_C(0xfe) - #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_OPAQUE_SFT 1 - /* 8-lsb timestamp from POR (100-msec resolution) */ - uint8_t timestamp_lo; - /* 16-lsb timestamp from POR (100-msec resolution) */ - uint16_t timestamp_hi; - /* Event specific data */ - uint32_t event_data1; - /* Indicates driver action requested */ - #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_DRIVER_ACTION_MASK \ - UINT32_C(0xff) - #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_DRIVER_ACTION_SFT \ - 0 + #define RX_TPA_END_CMPL_TYPE_RX_TPA_END UINT32_C(0x15) + #define RX_TPA_END_CMPL_TYPE_LAST \ + RX_TPA_END_CMPL_TYPE_RX_TPA_END + #define RX_TPA_END_CMPL_FLAGS_MASK UINT32_C(0xffc0) + #define RX_TPA_END_CMPL_FLAGS_SFT 6 /* - * If set to 1, it indicates that the l2 client should - * stop sending in band traffic to Nitro. - * if set to 0, there is no change in L2 client behavior. + * When this bit is '1', it indicates a packet that has an + * error of some type. Type of error is indicated in + * error_flags. */ - #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_DRIVER_ACTION_DRIVER_STOP_TX_QUEUE \ - UINT32_C(0x1) + #define RX_TPA_END_CMPL_FLAGS_ERROR UINT32_C(0x40) + /* This field indicates how the packet was placed in the buffer. */ + #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380) + #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_SFT 7 /* - * If set to 1, it indicates that the L2 client should - * bring down the interface. - * If set to 0, then there is no change in L2 client behavior. + * Jumbo: + * TPA Packet was placed using jumbo algorithm. This means + * that the first buffer will be filled with data before + * moving to aggregation buffers. Each aggregation buffer + * will be filled before moving to the next aggregation + * buffer. */ - #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_DRIVER_ACTION_DRIVER_IFDOWN \ - UINT32_C(0x2) - #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_DRIVER_ACTION_LAST \ - HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_DRIVER_ACTION_DRIVER_IFDOWN - /* Indicates reason for reset. */ - #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_REASON_CODE_MASK \ - UINT32_C(0xff00) - #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_REASON_CODE_SFT \ - 8 - /* A management client has requested reset. */ - #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_REASON_CODE_MANAGEMENT_RESET_REQUEST \ - (UINT32_C(0x1) << 8) - /* A fatal firmware exception has occurred. */ - #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_REASON_CODE_FW_EXCEPTION_FATAL \ - (UINT32_C(0x2) << 8) - /* A non-fatal firmware exception has occurred. */ - #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_REASON_CODE_FW_EXCEPTION_NON_FATAL \ - (UINT32_C(0x3) << 8) - #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_REASON_CODE_LAST \ - HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_REASON_CODE_FW_EXCEPTION_NON_FATAL + #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_JUMBO \ + (UINT32_C(0x1) << 7) /* - * Minimum time before driver should attempt access - units 100ms ticks. - * Range 0-65535 + * Header/Data Separation: + * Packet was placed using Header/Data separation algorithm. + * The separation location is indicated by the itype field. */ - #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_DELAY_IN_100MS_TICKS_MASK \ - UINT32_C(0xffff0000) - #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_DELAY_IN_100MS_TICKS_SFT \ - 16 -} __attribute__((packed)); - -/* hwrm_async_event_cmpl_func_drvr_unload (size:128b/16B) */ -struct hwrm_async_event_cmpl_func_drvr_unload { - uint16_t type; + #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_HDS \ + (UINT32_C(0x2) << 7) /* - * This field indicates the exact type of the completion. - * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B - * records. + * IOC/Jumbo: + * Packet will be placed using In-Order Completion/Jumbo where + * the first packet of the aggregation is placed using Jumbo + * Placement. Subsequent packets will be placed such that each + * packet starts at the beginning of an aggregation buffer. */ - #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_MASK \ - UINT32_C(0x3f) - #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_SFT 0 - /* HWRM Asynchronous Event Information */ - #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_HWRM_ASYNC_EVENT \ - UINT32_C(0x2e) - #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_LAST \ - HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_HWRM_ASYNC_EVENT - /* Identifiers of events. */ - uint16_t event_id; - /* Function driver unloaded */ - #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_ID_FUNC_DRVR_UNLOAD \ - UINT32_C(0x10) - #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_ID_LAST \ - HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_ID_FUNC_DRVR_UNLOAD - /* Event specific data */ - uint32_t event_data2; - uint8_t opaque_v; + #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_IOC_JUMBO \ + (UINT32_C(0x4) << 7) /* - * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * GRO/Jumbo: + * Packet will be placed using GRO/Jumbo where the first + * packet is filled with data. Subsequent packets will be + * placed such that any one packet does not span two + * aggregation buffers unless it starts at the beginning of + * an aggregation buffer. */ - #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_V UINT32_C(0x1) - /* opaque is 7 b */ - #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_OPAQUE_MASK \ - UINT32_C(0xfe) - #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_OPAQUE_SFT 1 - /* 8-lsb timestamp from POR (100-msec resolution) */ - uint8_t timestamp_lo; - /* 16-lsb timestamp from POR (100-msec resolution) */ - uint16_t timestamp_hi; - /* Event specific data */ - uint32_t event_data1; - /* Function ID */ - #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_DATA1_FUNC_ID_MASK \ - UINT32_C(0xffff) - #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_DATA1_FUNC_ID_SFT \ - 0 -} __attribute__((packed)); - -/* hwrm_async_event_cmpl_func_drvr_load (size:128b/16B) */ -struct hwrm_async_event_cmpl_func_drvr_load { - uint16_t type; + #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_GRO_JUMBO \ + (UINT32_C(0x5) << 7) /* - * This field indicates the exact type of the completion. - * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B - * records. + * GRO/Header-Data Separation: + * Packet will be placed using GRO/HDS where the header + * is in the first packet. + * Payload of each packet will be + * placed such that any one packet does not span two + * aggregation buffers unless it starts at the beginning of + * an aggregation buffer. */ - #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_MASK \ - UINT32_C(0x3f) - #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_SFT 0 - /* HWRM Asynchronous Event Information */ - #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_HWRM_ASYNC_EVENT \ - UINT32_C(0x2e) - #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_LAST \ - HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_HWRM_ASYNC_EVENT - /* Identifiers of events. */ - uint16_t event_id; - /* Function driver loaded */ - #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_ID_FUNC_DRVR_LOAD \ - UINT32_C(0x11) - #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_ID_LAST \ - HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_ID_FUNC_DRVR_LOAD - /* Event specific data */ - uint32_t event_data2; - uint8_t opaque_v; + #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_GRO_HDS \ + (UINT32_C(0x6) << 7) /* - * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * IOC/Header-Data Separation: + * Packet will be placed using In-Order Completion/HDS where + * the header is in the first packet buffer. Payload of each + * packet will be placed such that each packet starts at the + * beginning of an aggregation buffer. */ - #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_V UINT32_C(0x1) - /* opaque is 7 b */ - #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_OPAQUE_MASK UINT32_C(0xfe) - #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_OPAQUE_SFT 1 - /* 8-lsb timestamp from POR (100-msec resolution) */ - uint8_t timestamp_lo; - /* 16-lsb timestamp from POR (100-msec resolution) */ - uint16_t timestamp_hi; - /* Event specific data */ - uint32_t event_data1; - /* Function ID */ - #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_DATA1_FUNC_ID_MASK \ - UINT32_C(0xffff) - #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_DATA1_FUNC_ID_SFT 0 -} __attribute__((packed)); - -/* hwrm_async_event_cmpl_func_flr_proc_cmplt (size:128b/16B) */ -struct hwrm_async_event_cmpl_func_flr_proc_cmplt { - uint16_t type; + #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_IOC_HDS \ + (UINT32_C(0x7) << 7) + #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_LAST \ + RX_TPA_END_CMPL_FLAGS_PLACEMENT_IOC_HDS + /* unused is 1 b */ + #define RX_TPA_END_CMPL_FLAGS_UNUSED UINT32_C(0x400) /* - * This field indicates the exact type of the completion. - * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B - * records. + * This bit is '1' if metadata has been added to the end of the + * packet in host memory. Metadata starts at the first 32B boundary + * after the end of the packet for regular and jumbo placement. + * It starts at the first 32B boundary after the end of the header + * for HDS placement. The length of the metadata is indicated in the + * metadata itself. */ - #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_MASK \ - UINT32_C(0x3f) - #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_SFT \ - 0 - /* HWRM Asynchronous Event Information */ - #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_HWRM_ASYNC_EVENT \ - UINT32_C(0x2e) - #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_LAST \ - HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_HWRM_ASYNC_EVENT - /* Identifiers of events. */ - uint16_t event_id; - /* Function FLR related processing has completed */ - #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_ID_FUNC_FLR_PROC_CMPLT \ - UINT32_C(0x12) - #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_ID_LAST \ - HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_ID_FUNC_FLR_PROC_CMPLT - /* Event specific data */ - uint32_t event_data2; - uint8_t opaque_v; + #define RX_TPA_END_CMPL_FLAGS_PKT_METADATA_PRESENT UINT32_C(0x800) /* - * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * This value indicates what the inner packet determined for the + * packet was. + * - 2 TCP Packet + * Indicates that the packet was IP and TCP. This indicates + * that the ip_cs field is valid and that the tcp_udp_cs + * field is valid and contains the TCP checksum. + * This also indicates that the payload_offset field is valid. */ - #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_V \ - UINT32_C(0x1) - /* opaque is 7 b */ - #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_OPAQUE_MASK \ - UINT32_C(0xfe) - #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_OPAQUE_SFT 1 - /* 8-lsb timestamp from POR (100-msec resolution) */ - uint8_t timestamp_lo; - /* 16-lsb timestamp from POR (100-msec resolution) */ - uint16_t timestamp_hi; - /* Event specific data */ - uint32_t event_data1; - /* Function ID */ - #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_DATA1_FUNC_ID_MASK \ - UINT32_C(0xffff) - #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_DATA1_FUNC_ID_SFT \ - 0 -} __attribute__((packed)); - -/* hwrm_async_event_cmpl_pf_drvr_unload (size:128b/16B) */ -struct hwrm_async_event_cmpl_pf_drvr_unload { - uint16_t type; + #define RX_TPA_END_CMPL_FLAGS_ITYPE_MASK \ + UINT32_C(0xf000) + #define RX_TPA_END_CMPL_FLAGS_ITYPE_SFT 12 /* - * This field indicates the exact type of the completion. - * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B - * records. + * This value is zero for TPA End completions. + * There is no data in the buffer that corresponds to the opaque + * value in this completion. */ - #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_MASK \ - UINT32_C(0x3f) - #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_SFT 0 - /* HWRM Asynchronous Event Information */ - #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_HWRM_ASYNC_EVENT \ - UINT32_C(0x2e) - #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_LAST \ - HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_HWRM_ASYNC_EVENT - /* Identifiers of events. */ - uint16_t event_id; - /* PF driver unloaded */ - #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_ID_PF_DRVR_UNLOAD \ - UINT32_C(0x20) - #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_ID_LAST \ - HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_ID_PF_DRVR_UNLOAD - /* Event specific data */ - uint32_t event_data2; - uint8_t opaque_v; + uint16_t len; /* - * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * This is a copy of the opaque field from the RX BD this completion + * corresponds to. */ - #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_V UINT32_C(0x1) - /* opaque is 7 b */ - #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_OPAQUE_MASK UINT32_C(0xfe) - #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_OPAQUE_SFT 1 - /* 8-lsb timestamp from POR (100-msec resolution) */ - uint8_t timestamp_lo; - /* 16-lsb timestamp from POR (100-msec resolution) */ - uint16_t timestamp_hi; - /* Event specific data */ - uint32_t event_data1; - /* PF ID */ - #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_FUNC_ID_MASK \ - UINT32_C(0xffff) - #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_FUNC_ID_SFT 0 - /* Indicates the physical port this pf belongs to */ - #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_PORT_MASK \ - UINT32_C(0x70000) - #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_PORT_SFT 16 -} __attribute__((packed)); - -/* hwrm_async_event_cmpl_pf_drvr_load (size:128b/16B) */ -struct hwrm_async_event_cmpl_pf_drvr_load { - uint16_t type; + uint32_t opaque; /* - * This field indicates the exact type of the completion. - * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B - * records. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_MASK \ - UINT32_C(0x3f) - #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_SFT 0 - /* HWRM Asynchronous Event Information */ - #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_HWRM_ASYNC_EVENT \ - UINT32_C(0x2e) - #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_LAST \ - HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_HWRM_ASYNC_EVENT - /* Identifiers of events. */ - uint16_t event_id; - /* PF driver loaded */ - #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_ID_PF_DRVR_LOAD \ - UINT32_C(0x21) - #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_ID_LAST \ - HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_ID_PF_DRVR_LOAD - /* Event specific data */ - uint32_t event_data2; - uint8_t opaque_v; + uint8_t agg_bufs_v1; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_V UINT32_C(0x1) - /* opaque is 7 b */ - #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_OPAQUE_MASK UINT32_C(0xfe) - #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_OPAQUE_SFT 1 - /* 8-lsb timestamp from POR (100-msec resolution) */ - uint8_t timestamp_lo; - /* 16-lsb timestamp from POR (100-msec resolution) */ - uint16_t timestamp_hi; - /* Event specific data */ - uint32_t event_data1; - /* PF ID */ - #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_DATA1_FUNC_ID_MASK \ - UINT32_C(0xffff) - #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_DATA1_FUNC_ID_SFT 0 - /* Indicates the physical port this pf belongs to */ - #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_DATA1_PORT_MASK \ - UINT32_C(0x70000) - #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_DATA1_PORT_SFT 16 -} __attribute__((packed)); - -/* hwrm_async_event_cmpl_vf_flr (size:128b/16B) */ -struct hwrm_async_event_cmpl_vf_flr { - uint16_t type; + #define RX_TPA_END_CMPL_V1 UINT32_C(0x1) /* - * This field indicates the exact type of the completion. - * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B - * records. + * This value is the number of aggregation buffers that follow this + * entry in the completion ring that are a part of this aggregation + * packet. + * If the value is zero, then the packet is completely contained + * in the buffer space provided in the aggregation start completion. */ - #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_MASK \ - UINT32_C(0x3f) - #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_SFT 0 - /* HWRM Asynchronous Event Information */ - #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_HWRM_ASYNC_EVENT \ - UINT32_C(0x2e) - #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_LAST \ - HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_HWRM_ASYNC_EVENT - /* Identifiers of events. */ - uint16_t event_id; - /* VF Function Level Reset (FLR) */ - #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_ID_VF_FLR UINT32_C(0x30) - #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_ID_LAST \ - HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_ID_VF_FLR - /* Event specific data */ - uint32_t event_data2; - uint8_t opaque_v; + #define RX_TPA_END_CMPL_AGG_BUFS_MASK UINT32_C(0x7e) + #define RX_TPA_END_CMPL_AGG_BUFS_SFT 1 + /* This value is the number of segments in the TPA operation. */ + uint8_t tpa_segs; /* - * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * This value indicates the offset in bytes from the beginning of the packet + * where the inner payload starts. This value is valid for TCP, UDP, + * FCoE, and RoCE packets. + * + * A value of zero indicates an offset of 256 bytes. */ - #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_V UINT32_C(0x1) - /* opaque is 7 b */ - #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_OPAQUE_MASK UINT32_C(0xfe) - #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_OPAQUE_SFT 1 - /* 8-lsb timestamp from POR (100-msec resolution) */ - uint8_t timestamp_lo; - /* 16-lsb timestamp from POR (100-msec resolution) */ - uint16_t timestamp_hi; - /* Event specific data */ - uint32_t event_data1; - /* VF ID */ - #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_DATA1_VF_ID_MASK \ - UINT32_C(0xffff) - #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_DATA1_VF_ID_SFT 0 - /* Indicates the physical function this event occured on. */ - #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_DATA1_PF_ID_MASK \ - UINT32_C(0xff0000) - #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_DATA1_PF_ID_SFT 16 -} __attribute__((packed)); - -/* hwrm_async_event_cmpl_vf_mac_addr_change (size:128b/16B) */ -struct hwrm_async_event_cmpl_vf_mac_addr_change { - uint16_t type; + uint8_t payload_offset; + uint8_t agg_id; + /* unused2 is 1 b */ + #define RX_TPA_END_CMPL_UNUSED2 UINT32_C(0x1) /* - * This field indicates the exact type of the completion. - * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B - * records. + * This is the aggregation ID that the completion is associated + * with. Use this number to correlate the TPA start completion + * with the TPA end completion. */ - #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_MASK \ - UINT32_C(0x3f) - #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_SFT 0 - /* HWRM Asynchronous Event Information */ - #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_HWRM_ASYNC_EVENT \ - UINT32_C(0x2e) - #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_LAST \ - HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_HWRM_ASYNC_EVENT - /* Identifiers of events. */ - uint16_t event_id; - /* VF MAC Address Change */ - #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_ID_VF_MAC_ADDR_CHANGE \ - UINT32_C(0x31) - #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_ID_LAST \ - HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_ID_VF_MAC_ADDR_CHANGE - /* Event specific data */ - uint32_t event_data2; - uint8_t opaque_v; + #define RX_TPA_END_CMPL_AGG_ID_MASK UINT32_C(0xfe) + #define RX_TPA_END_CMPL_AGG_ID_SFT 1 /* - * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * For non-GRO packets, this value is the + * timestamp delta between earliest and latest timestamp values for + * TPA packet. If packets were not time stamped, then delta will be + * zero. + * + * For GRO packets, this field is zero except for the following + * sub-fields. + * - tsdelta[31] + * Timestamp present indication. When '0', no Timestamp + * option is in the packet. When '1', then a Timestamp + * option is present in the packet. */ - #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_V \ - UINT32_C(0x1) - /* opaque is 7 b */ - #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_OPAQUE_MASK \ - UINT32_C(0xfe) - #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_OPAQUE_SFT 1 - /* 8-lsb timestamp from POR (100-msec resolution) */ - uint8_t timestamp_lo; - /* 16-lsb timestamp from POR (100-msec resolution) */ - uint16_t timestamp_hi; - /* Event specific data */ - uint32_t event_data1; - /* VF ID */ - #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_DATA1_VF_ID_MASK \ - UINT32_C(0xffff) - #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_DATA1_VF_ID_SFT \ - 0 -} __attribute__((packed)); + uint32_t tsdelta; +} __rte_packed; -/* hwrm_async_event_cmpl_pf_vf_comm_status_change (size:128b/16B) */ -struct hwrm_async_event_cmpl_pf_vf_comm_status_change { - uint16_t type; +/* + * Last 16 bytes of rx_tpa_end_cmpl. + * + * This TPA completion structure is used on devices where the + * `hwrm_vnic_qcaps.max_aggs_supported` value is 0. + */ +/* rx_tpa_end_cmpl_hi (size:128b/16B) */ +struct rx_tpa_end_cmpl_hi { + uint32_t tpa_dup_acks; /* - * This field indicates the exact type of the completion. - * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B - * records. + * This value is the number of duplicate ACKs that have been + * received as part of the TPA operation. */ - #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_MASK \ - UINT32_C(0x3f) - #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_SFT \ - 0 - /* HWRM Asynchronous Event Information */ - #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_HWRM_ASYNC_EVENT \ - UINT32_C(0x2e) - #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_LAST \ - HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_HWRM_ASYNC_EVENT - /* Identifiers of events. */ - uint16_t event_id; - /* PF-VF communication channel status change. */ - #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_EVENT_ID_PF_VF_COMM_STATUS_CHANGE \ - UINT32_C(0x32) - #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_EVENT_ID_LAST \ - HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_EVENT_ID_PF_VF_COMM_STATUS_CHANGE - /* Event specific data */ - uint32_t event_data2; - uint8_t opaque_v; + #define RX_TPA_END_CMPL_TPA_DUP_ACKS_MASK UINT32_C(0xf) + #define RX_TPA_END_CMPL_TPA_DUP_ACKS_SFT 0 + /* + * This value is the valid when TPA completion is active. It + * indicates the length of the longest segment of the TPA operation + * for LRO mode and the length of the first segment in GRO mode. + * + * This value may be used by GRO software to re-construct the original + * packet stream from the TPA packet. This is the length of all + * but the last segment for GRO. In LRO mode this value may be used + * to indicate MSS size to the stack. + */ + uint16_t tpa_seg_len; + /* unused4 is 16 b */ + uint16_t unused3; + uint16_t errors_v2; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_V \ - UINT32_C(0x1) - /* opaque is 7 b */ - #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_OPAQUE_MASK \ - UINT32_C(0xfe) - #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_OPAQUE_SFT 1 - /* 8-lsb timestamp from POR (100-msec resolution) */ - uint8_t timestamp_lo; - /* 16-lsb timestamp from POR (100-msec resolution) */ - uint16_t timestamp_hi; - /* Event specific data */ - uint32_t event_data1; + #define RX_TPA_END_CMPL_V2 UINT32_C(0x1) + #define RX_TPA_END_CMPL_ERRORS_MASK UINT32_C(0xfffe) + #define RX_TPA_END_CMPL_ERRORS_SFT 1 /* - * If this bit is set to 1, then it indicates that the PF-VF - * communication was lost and it is established. - * If this bit set to 0, then it indicates that the PF-VF - * communication was established and it is lost. + * This error indicates that there was some sort of problem with + * the BDs for the packet that was found after part of the + * packet was already placed. The packet should be treated as + * invalid. */ - #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_EVENT_DATA1_COMM_ESTABLISHED \ - UINT32_C(0x1) -} __attribute__((packed)); + #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe) + #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_SFT 1 + /* + * This error occurs when there is a fatal HW problem in + * the chip only. It indicates that there were not + * BDs on chip but that there was adequate reservation. + * provided by the TPA block. + */ + #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_NOT_ON_CHIP \ + (UINT32_C(0x2) << 1) + /* + * This error occurs when TPA block was not configured to + * reserve adequate BDs for TPA operations on this RX + * ring. All data for the TPA operation was not placed. + * + * This error can also be generated when the number of + * segments is not programmed correctly in TPA and the + * 33 total aggregation buffers allowed for the TPA + * operation has been exceeded. + */ + #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_RSV_ERROR \ + (UINT32_C(0x4) << 1) + #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_LAST \ + RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_RSV_ERROR + /* unused5 is 16 b */ + uint16_t unused_4; + /* + * This is the opaque value that was completed for the TPA start + * completion that corresponds to this TPA end completion. + */ + uint32_t start_opaque; +} __rte_packed; -/* hwrm_async_event_cmpl_vf_cfg_change (size:128b/16B) */ -struct hwrm_async_event_cmpl_vf_cfg_change { - uint16_t type; +/* + * This TPA completion structure is used on devices where the + * `hwrm_vnic_qcaps.max_aggs_supported` value is greater than 0. + */ +/* rx_tpa_v2_start_cmpl (size:128b/16B) */ +struct rx_tpa_v2_start_cmpl { + uint16_t flags_type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ - #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_MASK \ + #define RX_TPA_V2_START_CMPL_TYPE_MASK \ UINT32_C(0x3f) - #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_SFT 0 - /* HWRM Asynchronous Event Information */ - #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT \ - UINT32_C(0x2e) - #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_LAST \ - HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT - /* Identifiers of events. */ - uint16_t event_id; - /* VF Configuration Change */ - #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_ID_VF_CFG_CHANGE \ - UINT32_C(0x33) - #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_ID_LAST \ - HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_ID_VF_CFG_CHANGE - /* Event specific data */ - uint32_t event_data2; - uint8_t opaque_v; + #define RX_TPA_V2_START_CMPL_TYPE_SFT 0 /* - * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * RX L2 TPA Start Completion: + * Completion at the beginning of a TPA operation. + * Length = 32B */ - #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_V UINT32_C(0x1) - /* opaque is 7 b */ - #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_OPAQUE_MASK UINT32_C(0xfe) - #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_OPAQUE_SFT 1 - /* 8-lsb timestamp from POR (100-msec resolution) */ - uint8_t timestamp_lo; - /* 16-lsb timestamp from POR (100-msec resolution) */ - uint16_t timestamp_hi; - /* - * Each flag provided in this field indicates a specific VF - * configuration change. At least one of these flags shall be set to 1 - * when an asynchronous event completion of this type is provided - * by the HWRM. + #define RX_TPA_V2_START_CMPL_TYPE_RX_TPA_START \ + UINT32_C(0x13) + #define RX_TPA_V2_START_CMPL_TYPE_LAST \ + RX_TPA_V2_START_CMPL_TYPE_RX_TPA_START + #define RX_TPA_V2_START_CMPL_FLAGS_MASK \ + UINT32_C(0xffc0) + #define RX_TPA_V2_START_CMPL_FLAGS_SFT 6 + /* This bit will always be '0' for TPA start completions. */ + #define RX_TPA_V2_START_CMPL_FLAGS_ERROR \ + UINT32_C(0x40) + /* This field indicates how the packet was placed in the buffer. */ + #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_MASK \ + UINT32_C(0x380) + #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_SFT 7 + /* + * Jumbo: + * TPA Packet was placed using jumbo algorithm. This means + * that the first buffer will be filled with data before + * moving to aggregation buffers. Each aggregation buffer + * will be filled before moving to the next aggregation + * buffer. */ - uint32_t event_data1; + #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_JUMBO \ + (UINT32_C(0x1) << 7) /* - * If this bit is set to 1, then the value of MTU - * was changed on this VF. - * If set to 0, then this bit should be ignored. + * Header/Data Separation: + * Packet was placed using Header/Data separation algorithm. + * The separation location is indicated by the itype field. */ - #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_MTU_CHANGE \ - UINT32_C(0x1) + #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_HDS \ + (UINT32_C(0x2) << 7) /* - * If this bit is set to 1, then the value of MRU - * was changed on this VF. - * If set to 0, then this bit should be ignored. + * GRO/Jumbo: + * Packet will be placed using GRO/Jumbo where the first + * packet is filled with data. Subsequent packets will be + * placed such that any one packet does not span two + * aggregation buffers unless it starts at the beginning of + * an aggregation buffer. */ - #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_MRU_CHANGE \ - UINT32_C(0x2) + #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_GRO_JUMBO \ + (UINT32_C(0x5) << 7) /* - * If this bit is set to 1, then the value of default MAC - * address was changed on this VF. - * If set to 0, then this bit should be ignored. + * GRO/Header-Data Separation: + * Packet will be placed using GRO/HDS where the header + * is in the first packet. + * Payload of each packet will be + * placed such that any one packet does not span two + * aggregation buffers unless it starts at the beginning of + * an aggregation buffer. */ - #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_DFLT_MAC_ADDR_CHANGE \ - UINT32_C(0x4) + #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_GRO_HDS \ + (UINT32_C(0x6) << 7) + #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_LAST \ + RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_GRO_HDS + /* This bit is '1' if the RSS field in this completion is valid. */ + #define RX_TPA_V2_START_CMPL_FLAGS_RSS_VALID \ + UINT32_C(0x400) /* - * If this bit is set to 1, then the value of default VLAN - * was changed on this VF. - * If set to 0, then this bit should be ignored. + * For devices that support timestamps, when this bit is cleared the + * `inner_l4_size_inner_l3_offset_inner_l2_offset_outer_l3_offset` + * field contains the 32b timestamp for + * the packet from the MAC. When this bit is set, the + * `inner_l4_size_inner_l3_offset_inner_l2_offset_outer_l3_offset` + * field contains the outer_l3_offset, inner_l2_offset, + * inner_l3_offset, and inner_l4_size. */ - #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_DFLT_VLAN_CHANGE \ - UINT32_C(0x8) + #define RX_TPA_V2_START_CMPL_FLAGS_TIMESTAMP_FLD_FORMAT \ + UINT32_C(0x800) /* - * If this bit is set to 1, then the value of trusted VF enable - * was changed on this VF. - * If set to 0, then this bit should be ignored. + * This value indicates what the inner packet determined for the + * packet was. */ - #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_TRUSTED_VF_CFG_CHANGE \ - UINT32_C(0x10) -} __attribute__((packed)); - -/* hwrm_async_event_cmpl_llfc_pfc_change (size:128b/16B) */ -struct hwrm_async_event_cmpl_llfc_pfc_change { - uint16_t type; + #define RX_TPA_V2_START_CMPL_FLAGS_ITYPE_MASK \ + UINT32_C(0xf000) + #define RX_TPA_V2_START_CMPL_FLAGS_ITYPE_SFT 12 /* - * This field indicates the exact type of the completion. - * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B - * records. + * TCP Packet: + * Indicates that the packet was IP and TCP. */ - #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_TYPE_MASK \ - UINT32_C(0x3f) - #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_TYPE_SFT 0 - /* HWRM Asynchronous Event Information */ - #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_TYPE_HWRM_ASYNC_EVENT \ - UINT32_C(0x2e) - #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_TYPE_LAST \ - HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_TYPE_HWRM_ASYNC_EVENT - /* unused1 is 10 b */ - #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_UNUSED1_MASK \ - UINT32_C(0xffc0) - #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_UNUSED1_SFT 6 - /* Identifiers of events. */ - uint16_t event_id; - /* LLFC/PFC Configuration Change */ - #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_ID_LLFC_PFC_CHANGE \ - UINT32_C(0x34) - #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_ID_LAST \ - HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_ID_LLFC_PFC_CHANGE - /* Event specific data */ - uint32_t event_data2; - uint8_t opaque_v; + #define RX_TPA_V2_START_CMPL_FLAGS_ITYPE_TCP \ + (UINT32_C(0x2) << 12) + #define RX_TPA_V2_START_CMPL_FLAGS_ITYPE_LAST \ + RX_TPA_V2_START_CMPL_FLAGS_ITYPE_TCP + /* + * This value indicates the amount of packet data written to the + * buffer the opaque field in this completion corresponds to. + */ + uint16_t len; + /* + * This is a copy of the opaque field from the RX BD this completion + * corresponds to. + */ + uint32_t opaque; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_V UINT32_C(0x1) - /* opaque is 7 b */ - #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_OPAQUE_MASK \ - UINT32_C(0xfe) - #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_OPAQUE_SFT 1 - /* 8-lsb timestamp from POR (100-msec resolution) */ - uint8_t timestamp_lo; - /* 16-lsb timestamp from POR (100-msec resolution) */ - uint16_t timestamp_hi; - /* Event specific data */ - uint32_t event_data1; - /* Indicates llfc pfc status change */ - #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_MASK \ - UINT32_C(0x3) - #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_SFT \ - 0 + uint8_t v1; /* - * If this field set to 1, then it indicates that llfc is - * enabled. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_LLFC \ - UINT32_C(0x1) + #define RX_TPA_V2_START_CMPL_V1 UINT32_C(0x1) + #define RX_TPA_V2_START_CMPL_LAST RX_TPA_V2_START_CMPL_V1 /* - * If this field is set to 2, then it indicates that pfc - * is enabled. + * This is the RSS hash type for the packet. The value is packed + * {tuple_extrac_op[1:0],rss_profile_id[4:0],tuple_extrac_op[2]}. + * + * The value of tuple_extrac_op provides the information about + * what fields the hash was computed on. + * * 0: The RSS hash was computed over source IP address, + * destination IP address, source port, and destination port of inner + * IP and TCP or UDP headers. Note: For non-tunneled packets, + * the packet headers are considered inner packet headers for the RSS + * hash computation purpose. + * * 1: The RSS hash was computed over source IP address and destination + * IP address of inner IP header. Note: For non-tunneled packets, + * the packet headers are considered inner packet headers for the RSS + * hash computation purpose. + * * 2: The RSS hash was computed over source IP address, + * destination IP address, source port, and destination port of + * IP and TCP or UDP headers of outer tunnel headers. + * Note: For non-tunneled packets, this value is not applicable. + * * 3: The RSS hash was computed over source IP address and + * destination IP address of IP header of outer tunnel headers. + * Note: For non-tunneled packets, this value is not applicable. + * + * Note that 4-tuples values listed above are applicable + * for layer 4 protocols supported and enabled for RSS in the hardware, + * HWRM firmware, and drivers. For example, if RSS hash is supported and + * enabled for TCP traffic only, then the values of tuple_extract_op + * corresponding to 4-tuples are only valid for TCP traffic. */ - #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_PFC \ - UINT32_C(0x2) - #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_LAST \ - HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_PFC - /* Indicates the physical port this llfc pfc change occur */ - #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_PORT_MASK \ - UINT32_C(0x1c) - #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_PORT_SFT \ - 2 - /* PORT ID */ - #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_PORT_ID_MASK \ - UINT32_C(0x1fffe0) - #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_PORT_ID_SFT \ - 5 -} __attribute__((packed)); - -/* hwrm_async_event_cmpl_default_vnic_change (size:128b/16B) */ -struct hwrm_async_event_cmpl_default_vnic_change { - uint16_t type; + uint8_t rss_hash_type; /* - * This field indicates the exact type of the completion. - * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B - * records. + * This is the aggregation ID that the completion is associated + * with. Use this number to correlate the TPA start completion + * with the TPA end completion. */ - #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_TYPE_MASK \ - UINT32_C(0x3f) - #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_TYPE_SFT \ - 0 - /* HWRM Asynchronous Event Information */ - #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_TYPE_HWRM_ASYNC_EVENT \ - UINT32_C(0x2e) - #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_TYPE_LAST \ - HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_TYPE_HWRM_ASYNC_EVENT - /* unused1 is 10 b */ - #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_UNUSED1_MASK \ - UINT32_C(0xffc0) - #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_UNUSED1_SFT \ - 6 - /* Identifiers of events. */ - uint16_t event_id; - /* Notification of a default vnic allocaiton or free */ - #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_ID_ALLOC_FREE_NOTIFICATION \ - UINT32_C(0x35) - #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_ID_LAST \ - HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_ID_ALLOC_FREE_NOTIFICATION - /* Event specific data */ - uint32_t event_data2; - uint8_t opaque_v; + uint16_t agg_id; /* - * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * This value is the RSS hash value calculated for the packet + * based on the mode bits and key value in the VNIC. */ - #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_V \ - UINT32_C(0x1) - /* opaque is 7 b */ - #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_OPAQUE_MASK \ - UINT32_C(0xfe) - #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_OPAQUE_SFT 1 - /* 8-lsb timestamp from POR (100-msec resolution) */ - uint8_t timestamp_lo; - /* 16-lsb timestamp from POR (100-msec resolution) */ - uint16_t timestamp_hi; - /* Event specific data */ - uint32_t event_data1; - /* Indicates default vnic configuration change */ - #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_MASK \ - UINT32_C(0x3) - #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_SFT \ - 0 + uint32_t rss_hash; +} __rte_packed; + +/* + * Last 16 bytes of rx_tpa_v2_start_cmpl. + * + * This TPA completion structure is used on devices where the + * `hwrm_vnic_qcaps.max_aggs_supported` value is greater than 0. + */ +/* rx_tpa_v2_start_cmpl_hi (size:128b/16B) */ +struct rx_tpa_v2_start_cmpl_hi { + uint32_t flags2; /* - * If this field is set to 1, then it indicates that - * a default VNIC has been allocate. + * This indicates that the ip checksum was calculated for the + * inner packet and that the sum passed for all segments + * included in the aggregation. */ - #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_DEF_VNIC_ALLOC \ + #define RX_TPA_V2_START_CMPL_FLAGS2_IP_CS_CALC \ UINT32_C(0x1) /* - * If this field is set to 2, then it indicates that - * a default VNIC has been freed. + * This indicates that the TCP, UDP or ICMP checksum was + * calculated for the inner packet and that the sum passed + * for all segments included in the aggregation. */ - #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_DEF_VNIC_FREE \ + #define RX_TPA_V2_START_CMPL_FLAGS2_L4_CS_CALC \ UINT32_C(0x2) - #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_LAST \ - HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_DEF_VNIC_FREE - /* Indicates the physical function this event occured on. */ - #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_PF_ID_MASK \ - UINT32_C(0x3fc) - #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_PF_ID_SFT \ - 2 - /* Indicates the virtual function this event occured on */ - #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_VF_ID_MASK \ - UINT32_C(0x3fffc00) - #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_VF_ID_SFT \ - 10 -} __attribute__((packed)); - -/* hwrm_async_event_cmpl_hwrm_error (size:128b/16B) */ -struct hwrm_async_event_cmpl_hwrm_error { - uint16_t type; /* - * This field indicates the exact type of the completion. - * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B - * records. + * This indicates that the ip checksum was calculated for the + * tunnel header and that the sum passed for all segments + * included in the aggregation. */ - #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_MASK \ - UINT32_C(0x3f) - #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_SFT 0 - /* HWRM Asynchronous Event Information */ - #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_HWRM_ASYNC_EVENT \ - UINT32_C(0x2e) - #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_LAST \ - HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_HWRM_ASYNC_EVENT - /* Identifiers of events. */ - uint16_t event_id; - /* HWRM Error */ - #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_HWRM_ERROR \ - UINT32_C(0xff) - #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_LAST \ - HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_HWRM_ERROR - /* Event specific data */ - uint32_t event_data2; - /* Severity of HWRM Error */ - #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_MASK \ - UINT32_C(0xff) - #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_SFT 0 - /* Warning */ - #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_WARNING \ - UINT32_C(0x0) - /* Non-fatal Error */ - #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_NONFATAL \ - UINT32_C(0x1) - /* Fatal Error */ - #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_FATAL \ - UINT32_C(0x2) - #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_LAST \ - HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_FATAL - uint8_t opaque_v; + #define RX_TPA_V2_START_CMPL_FLAGS2_T_IP_CS_CALC \ + UINT32_C(0x4) /* - * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * This indicates that the UDP checksum was + * calculated for the tunnel packet and that the sum passed for + * all segments included in the aggregation. */ - #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_V UINT32_C(0x1) - /* opaque is 7 b */ - #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_OPAQUE_MASK UINT32_C(0xfe) - #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_OPAQUE_SFT 1 - /* 8-lsb timestamp from POR (100-msec resolution) */ - uint8_t timestamp_lo; - /* 16-lsb timestamp from POR (100-msec resolution) */ - uint16_t timestamp_hi; - /* Event specific data */ - uint32_t event_data1; - /* Time stamp for error event */ - #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA1_TIMESTAMP \ - UINT32_C(0x1) -} __attribute__((packed)); - -/******************* - * hwrm_func_reset * - *******************/ - - -/* hwrm_func_reset_input (size:192b/24B) */ -struct hwrm_func_reset_input { - /* The HWRM command request type. */ - uint16_t req_type; + #define RX_TPA_V2_START_CMPL_FLAGS2_T_L4_CS_CALC \ + UINT32_C(0x8) + /* This value indicates what format the metadata field is. */ + #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_MASK \ + UINT32_C(0xf0) + #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_SFT 4 + /* No metadata informtaion. Value is zero. */ + #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_NONE \ + (UINT32_C(0x0) << 4) /* - * The completion ring to send the completion event on. This should - * be the NQ ID returned from the `nq_alloc` HWRM command. + * The metadata field contains the VLAN tag and TPID value. + * - metadata[11:0] contains the vlan VID value. + * - metadata[12] contains the vlan DE value. + * - metadata[15:13] contains the vlan PRI value. + * - metadata[31:16] contains the vlan TPID value. */ - uint16_t cmpl_ring; + #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_VLAN \ + (UINT32_C(0x1) << 4) /* - * The sequence ID is used by the driver for tracking multiple - * commands. This ID is treated as opaque data by the firmware and - * the value is returned in the `hwrm_resp_hdr` upon completion. + * If ext_meta_format is equal to 1, the metadata field + * contains the lower 16b of the tunnel ID value, justified + * to LSB + * - VXLAN = VNI[23:0] -> VXLAN Network ID + * - Geneve (NGE) = VNI[23:0] a-> Virtual Network Identifier. + * - NVGRE = TNI[23:0] -> Tenant Network ID + * - GRE = KEY[31:0 -> key fieled with bit mask. zero if K = 0 + * - IPV4 = 0 (not populated) + * - IPV6 = Flow Label[19:0] + * - PPPoE = sessionID[15:0] + * - MPLs = Outer label[19:0] + * - UPAR = Selected[31:0] with bit mask + */ + #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_TUNNEL_ID \ + (UINT32_C(0x2) << 4) + /* + * if ext_meta_format is equal to 1, metadata field contains + * 16b metadata from the prepended header (chdr_data). */ - uint16_t seq_id; + #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_CHDR_DATA \ + (UINT32_C(0x3) << 4) /* - * The target ID of the command: - * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors - * * 0xFFFF - HWRM + * If ext_meta_format is equal to 1, the metadata field contains + * the outer_l3_offset, inner_l2_offset, inner_l3_offset and + * inner_l4_size. + * - metadata[8:0] contains the outer_l3_offset. + * - metadata[17:9] contains the inner_l2_offset. + * - metadata[26:18] contains the inner_l3_offset. + * - metadata[31:27] contains the inner_l4_size. */ - uint16_t target_id; + #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_HDR_OFFSET \ + (UINT32_C(0x4) << 4) + #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_LAST \ + RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_HDR_OFFSET /* - * A physical address pointer pointing to a host buffer that the - * command's response data will be written. This can be either a host - * physical address (HPA) or a guest physical address (GPA) and must - * point to a physically contiguous block of memory. + * This field indicates the IP type for the inner-most IP header. + * A value of '0' indicates IPv4. A value of '1' indicates IPv6. */ - uint64_t resp_addr; - uint32_t enables; + #define RX_TPA_V2_START_CMPL_FLAGS2_IP_TYPE \ + UINT32_C(0x100) /* - * This bit must be '1' for the vf_id_valid field to be - * configured. + * This indicates that the complete 1's complement checksum was + * calculated for the packet. */ - #define HWRM_FUNC_RESET_INPUT_ENABLES_VF_ID_VALID UINT32_C(0x1) + #define RX_TPA_V2_START_CMPL_FLAGS2_COMPLETE_CHECKSUM_CALC \ + UINT32_C(0x200) /* - * The ID of the VF that this PF is trying to reset. - * Only the parent PF shall be allowed to reset a child VF. - * - * A parent PF driver shall use this field only when a specific child VF - * is requested to be reset. + * The combination of this value and meta_format indicated what + * format the metadata field is. */ - uint16_t vf_id; - /* This value indicates the level of a function reset. */ - uint8_t func_reset_level; + #define RX_TPA_V2_START_CMPL_FLAGS2_EXT_META_FORMAT_MASK \ + UINT32_C(0xc00) + #define RX_TPA_V2_START_CMPL_FLAGS2_EXT_META_FORMAT_SFT 10 /* - * Reset the caller function and its children VFs (if any). If no - * children functions exist, then reset the caller function only. + * This value is the complete 1's complement checksum calculated from + * the start of the outer L3 header to the end of the packet (not + * including the ethernet crc). It is valid when the + * 'complete_checksum_calc' flag is set. For TPA Start completions, + * the complete checksum is calculated for the first packet in the + * aggregation only. */ - #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETALL \ - UINT32_C(0x0) - /* Reset the caller function only */ - #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETME \ - UINT32_C(0x1) + #define RX_TPA_V2_START_CMPL_FLAGS2_COMPLETE_CHECKSUM_MASK \ + UINT32_C(0xffff0000) + #define RX_TPA_V2_START_CMPL_FLAGS2_COMPLETE_CHECKSUM_SFT 16 /* - * Reset all children VFs of the caller function driver if the - * caller is a PF driver. - * It is an error to specify this level by a VF driver. - * It is an error to specify this level by a PF driver with - * no children VFs. + * This is data from the CFA block as indicated by the meta_format + * field. */ - #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETCHILDREN \ - UINT32_C(0x2) + uint32_t metadata; + /* When {ext_meta_format,meta_format}=1, this value is the VLAN VID. */ + #define RX_TPA_V2_START_CMPL_METADATA_VID_MASK UINT32_C(0xfff) + #define RX_TPA_V2_START_CMPL_METADATA_VID_SFT 0 + /* When {ext_meta_format,meta_format}=1, this value is the VLAN DE. */ + #define RX_TPA_V2_START_CMPL_METADATA_DE UINT32_C(0x1000) + /* When {ext_meta_format,meta_format}=1, this value is the VLAN PRI. */ + #define RX_TPA_V2_START_CMPL_METADATA_PRI_MASK UINT32_C(0xe000) + #define RX_TPA_V2_START_CMPL_METADATA_PRI_SFT 13 + /* When {ext_meta_format,meta_format}=1, this value is the VLAN TPID. */ + #define RX_TPA_V2_START_CMPL_METADATA_TPID_MASK UINT32_C(0xffff0000) + #define RX_TPA_V2_START_CMPL_METADATA_TPID_SFT 16 + uint16_t errors_v2; /* - * Reset a specific VF of the caller function driver if the caller - * is the parent PF driver. - * It is an error to specify this level by a VF driver. - * It is an error to specify this level by a PF driver that is not - * the parent of the VF that is being requested to reset. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETVF \ - UINT32_C(0x3) - #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_LAST \ - HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETVF - uint8_t unused_0; -} __attribute__((packed)); - -/* hwrm_func_reset_output (size:128b/16B) */ -struct hwrm_func_reset_output { - /* The specific error status for the command. */ - uint16_t error_code; - /* The HWRM command request type. */ - uint16_t req_type; - /* The sequence ID from the original command. */ - uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; - uint8_t unused_0[7]; + #define RX_TPA_V2_START_CMPL_V2 \ + UINT32_C(0x1) + #define RX_TPA_V2_START_CMPL_ERRORS_MASK \ + UINT32_C(0xfffe) + #define RX_TPA_V2_START_CMPL_ERRORS_SFT 1 /* - * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' - * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. + * This error indicates that there was some sort of problem with + * the BDs for the packet that was found after part of the + * packet was already placed. The packet should be treated as + * invalid. */ - uint8_t valid; -} __attribute__((packed)); - -/******************** - * hwrm_func_getfid * - ********************/ - - -/* hwrm_func_getfid_input (size:192b/24B) */ -struct hwrm_func_getfid_input { - /* The HWRM command request type. */ - uint16_t req_type; + #define RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_MASK \ + UINT32_C(0xe) + #define RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_SFT 1 + /* No buffer error */ + #define RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_NO_BUFFER \ + (UINT32_C(0x0) << 1) /* - * The completion ring to send the completion event on. This should - * be the NQ ID returned from the `nq_alloc` HWRM command. + * Bad Format: + * BDs were not formatted correctly. */ - uint16_t cmpl_ring; + #define RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT \ + (UINT32_C(0x3) << 1) /* - * The sequence ID is used by the driver for tracking multiple - * commands. This ID is treated as opaque data by the firmware and - * the value is returned in the `hwrm_resp_hdr` upon completion. + * Flush: + * There was a bad_format error on the previous operation */ - uint16_t seq_id; + #define RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_FLUSH \ + (UINT32_C(0x5) << 1) + #define RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_LAST \ + RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_FLUSH /* - * The target ID of the command: - * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors - * * 0xFFFF - HWRM + * This field identifies the CFA action rule that was used for this + * packet. */ - uint16_t target_id; + uint16_t cfa_code; /* - * A physical address pointer pointing to a host buffer that the - * command's response data will be written. This can be either a host - * physical address (HPA) or a guest physical address (GPA) and must - * point to a physically contiguous block of memory. + * For devices that support timestamps this field is overridden + * with the timestamp value. When `flags.timestamp_fld_format` is + * cleared, this field contains the 32b timestamp for the packet from the + * MAC. + * + * When `flags.timestamp_fld_format` is set, this field contains the + * outer_l3_offset, inner_l2_offset, inner_l3_offset, and inner_l4_size + * as defined below. */ - uint64_t resp_addr; - uint32_t enables; + uint32_t inner_l4_size_inner_l3_offset_inner_l2_offset_outer_l3_offset; /* - * This bit must be '1' for the pci_id field to be - * configured. + * This is the offset from the beginning of the packet in bytes for + * the outer L3 header. If there is no outer L3 header, then this + * value is zero. */ - #define HWRM_FUNC_GETFID_INPUT_ENABLES_PCI_ID UINT32_C(0x1) + #define RX_TPA_V2_START_CMPL_OUTER_L3_OFFSET_MASK UINT32_C(0x1ff) + #define RX_TPA_V2_START_CMPL_OUTER_L3_OFFSET_SFT 0 /* - * This value is the PCI ID of the queried function. - * If ARI is enabled, then it is - * Bus Number (8b):Function Number(8b). Otherwise, it is - * Bus Number (8b):Device Number (5b):Function Number(3b). + * This is the offset from the beginning of the packet in bytes for + * the inner most L2 header. */ - uint16_t pci_id; - uint8_t unused_0[2]; -} __attribute__((packed)); - -/* hwrm_func_getfid_output (size:128b/16B) */ -struct hwrm_func_getfid_output { - /* The specific error status for the command. */ - uint16_t error_code; - /* The HWRM command request type. */ - uint16_t req_type; - /* The sequence ID from the original command. */ - uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; + #define RX_TPA_V2_START_CMPL_INNER_L2_OFFSET_MASK UINT32_C(0x3fe00) + #define RX_TPA_V2_START_CMPL_INNER_L2_OFFSET_SFT 9 /* - * FID value. This value is used to identify operations on the PCI - * bus as belonging to a particular PCI function. + * This is the offset from the beginning of the packet in bytes for + * the inner most L3 header. */ - uint16_t fid; - uint8_t unused_0[5]; + #define RX_TPA_V2_START_CMPL_INNER_L3_OFFSET_MASK UINT32_C(0x7fc0000) + #define RX_TPA_V2_START_CMPL_INNER_L3_OFFSET_SFT 18 /* - * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' - * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. + * This is the size in bytes of the inner most L4 header. + * This can be subtracted from the payload_offset to determine + * the start of the inner most L4 header. */ - uint8_t valid; -} __attribute__((packed)); - -/********************** - * hwrm_func_vf_alloc * - **********************/ + #define RX_TPA_V2_START_CMPL_INNER_L4_SIZE_MASK UINT32_C(0xf8000000) + #define RX_TPA_V2_START_CMPL_INNER_L4_SIZE_SFT 27 +} __rte_packed; - -/* hwrm_func_vf_alloc_input (size:192b/24B) */ -struct hwrm_func_vf_alloc_input { - /* The HWRM command request type. */ - uint16_t req_type; +/* + * This TPA completion structure is used on devices where the + * `hwrm_vnic_qcaps.max_aggs_supported` value is greater than 0. + */ +/* rx_tpa_v2_end_cmpl (size:128b/16B) */ +struct rx_tpa_v2_end_cmpl { + uint16_t flags_type; /* - * The completion ring to send the completion event on. This should - * be the NQ ID returned from the `nq_alloc` HWRM command. - */ - uint16_t cmpl_ring; - /* - * The sequence ID is used by the driver for tracking multiple - * commands. This ID is treated as opaque data by the firmware and - * the value is returned in the `hwrm_resp_hdr` upon completion. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - uint16_t seq_id; + #define RX_TPA_V2_END_CMPL_TYPE_MASK UINT32_C(0x3f) + #define RX_TPA_V2_END_CMPL_TYPE_SFT 0 /* - * The target ID of the command: - * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors - * * 0xFFFF - HWRM + * RX L2 TPA End Completion: + * Completion at the end of a TPA operation. + * Length = 32B */ - uint16_t target_id; + #define RX_TPA_V2_END_CMPL_TYPE_RX_TPA_END UINT32_C(0x15) + #define RX_TPA_V2_END_CMPL_TYPE_LAST \ + RX_TPA_V2_END_CMPL_TYPE_RX_TPA_END + #define RX_TPA_V2_END_CMPL_FLAGS_MASK UINT32_C(0xffc0) + #define RX_TPA_V2_END_CMPL_FLAGS_SFT 6 /* - * A physical address pointer pointing to a host buffer that the - * command's response data will be written. This can be either a host - * physical address (HPA) or a guest physical address (GPA) and must - * point to a physically contiguous block of memory. + * When this bit is '1', it indicates a packet that has an + * error of some type. Type of error is indicated in + * error_flags. */ - uint64_t resp_addr; - uint32_t enables; + #define RX_TPA_V2_END_CMPL_FLAGS_ERROR UINT32_C(0x40) + /* This field indicates how the packet was placed in the buffer. */ + #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380) + #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_SFT 7 /* - * This bit must be '1' for the first_vf_id field to be - * configured. + * Jumbo: + * TPA Packet was placed using jumbo algorithm. This means + * that the first buffer will be filled with data before + * moving to aggregation buffers. Each aggregation buffer + * will be filled before moving to the next aggregation + * buffer. */ - #define HWRM_FUNC_VF_ALLOC_INPUT_ENABLES_FIRST_VF_ID UINT32_C(0x1) + #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_JUMBO \ + (UINT32_C(0x1) << 7) /* - * This value is used to identify a Virtual Function (VF). - * The scope of VF ID is local within a PF. + * Header/Data Separation: + * Packet was placed using Header/Data separation algorithm. + * The separation location is indicated by the itype field. */ - uint16_t first_vf_id; - /* The number of virtual functions requested. */ - uint16_t num_vfs; -} __attribute__((packed)); - -/* hwrm_func_vf_alloc_output (size:128b/16B) */ -struct hwrm_func_vf_alloc_output { - /* The specific error status for the command. */ - uint16_t error_code; - /* The HWRM command request type. */ - uint16_t req_type; - /* The sequence ID from the original command. */ - uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; - /* The ID of the first VF allocated. */ - uint16_t first_vf_id; - uint8_t unused_0[5]; + #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_HDS \ + (UINT32_C(0x2) << 7) /* - * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' - * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. + * GRO/Jumbo: + * Packet will be placed using GRO/Jumbo where the first + * packet is filled with data. Subsequent packets will be + * placed such that any one packet does not span two + * aggregation buffers unless it starts at the beginning of + * an aggregation buffer. */ - uint8_t valid; -} __attribute__((packed)); - -/********************* - * hwrm_func_vf_free * - *********************/ - - -/* hwrm_func_vf_free_input (size:192b/24B) */ -struct hwrm_func_vf_free_input { - /* The HWRM command request type. */ - uint16_t req_type; + #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_GRO_JUMBO \ + (UINT32_C(0x5) << 7) /* - * The completion ring to send the completion event on. This should - * be the NQ ID returned from the `nq_alloc` HWRM command. + * GRO/Header-Data Separation: + * Packet will be placed using GRO/HDS where the header + * is in the first packet. + * Payload of each packet will be + * placed such that any one packet does not span two + * aggregation buffers unless it starts at the beginning of + * an aggregation buffer. */ - uint16_t cmpl_ring; + #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_GRO_HDS \ + (UINT32_C(0x6) << 7) + #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_LAST \ + RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_GRO_HDS + /* unused is 2 b */ + #define RX_TPA_V2_END_CMPL_FLAGS_UNUSED_MASK UINT32_C(0xc00) + #define RX_TPA_V2_END_CMPL_FLAGS_UNUSED_SFT 10 /* - * The sequence ID is used by the driver for tracking multiple - * commands. This ID is treated as opaque data by the firmware and - * the value is returned in the `hwrm_resp_hdr` upon completion. + * This value indicates what the inner packet determined for the + * packet was. + * - 2 TCP Packet + * Indicates that the packet was IP and TCP. This indicates + * that the ip_cs field is valid and that the tcp_udp_cs + * field is valid and contains the TCP checksum. + * This also indicates that the payload_offset field is valid. */ - uint16_t seq_id; + #define RX_TPA_V2_END_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000) + #define RX_TPA_V2_END_CMPL_FLAGS_ITYPE_SFT 12 /* - * The target ID of the command: - * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors - * * 0xFFFF - HWRM + * This value is zero for TPA End completions. + * There is no data in the buffer that corresponds to the opaque + * value in this completion. */ - uint16_t target_id; + uint16_t len; /* - * A physical address pointer pointing to a host buffer that the - * command's response data will be written. This can be either a host - * physical address (HPA) or a guest physical address (GPA) and must - * point to a physically contiguous block of memory. + * This is a copy of the opaque field from the RX BD this completion + * corresponds to. */ - uint64_t resp_addr; - uint32_t enables; + uint32_t opaque; + uint8_t v1; /* - * This bit must be '1' for the first_vf_id field to be - * configured. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - #define HWRM_FUNC_VF_FREE_INPUT_ENABLES_FIRST_VF_ID UINT32_C(0x1) + #define RX_TPA_V2_END_CMPL_V1 UINT32_C(0x1) + /* This value is the number of segments in the TPA operation. */ + uint8_t tpa_segs; /* - * This value is used to identify a Virtual Function (VF). - * The scope of VF ID is local within a PF. + * This is the aggregation ID that the completion is associated + * with. Use this number to correlate the TPA start completion + * with the TPA end completion. */ - uint16_t first_vf_id; + uint16_t agg_id; /* - * The number of virtual functions requested. - * 0xFFFF - Cleanup all children of this PF. + * For non-GRO packets, this value is the + * timestamp delta between earliest and latest timestamp values for + * TPA packet. If packets were not time stamped, then delta will be + * zero. + * + * For GRO packets, this field is zero except for the following + * sub-fields. + * - tsdelta[31] + * Timestamp present indication. When '0', no Timestamp + * option is in the packet. When '1', then a Timestamp + * option is present in the packet. */ - uint16_t num_vfs; -} __attribute__((packed)); + uint32_t tsdelta; +} __rte_packed; -/* hwrm_func_vf_free_output (size:128b/16B) */ -struct hwrm_func_vf_free_output { - /* The specific error status for the command. */ - uint16_t error_code; - /* The HWRM command request type. */ - uint16_t req_type; - /* The sequence ID from the original command. */ - uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; - uint8_t unused_0[7]; +/* + * Last 16 bytes of rx_tpa_v2_end_cmpl. + * + * This TPA completion structure is used on devices where the + * `hwrm_vnic_qcaps.max_aggs_supported` value is greater than 0. + */ +/* rx_tpa_v2_end_cmpl_hi (size:128b/16B) */ +struct rx_tpa_v2_end_cmpl_hi { /* - * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' - * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. + * This value is the number of duplicate ACKs that have been + * received as part of the TPA operation. */ - uint8_t valid; -} __attribute__((packed)); - -/******************** - * hwrm_func_vf_cfg * - ********************/ - - -/* hwrm_func_vf_cfg_input (size:448b/56B) */ -struct hwrm_func_vf_cfg_input { - /* The HWRM command request type. */ - uint16_t req_type; + uint16_t tpa_dup_acks; /* - * The completion ring to send the completion event on. This should - * be the NQ ID returned from the `nq_alloc` HWRM command. + * This value is the number of duplicate ACKs that have been + * received as part of the TPA operation. */ - uint16_t cmpl_ring; + #define RX_TPA_V2_END_CMPL_TPA_DUP_ACKS_MASK UINT32_C(0xf) + #define RX_TPA_V2_END_CMPL_TPA_DUP_ACKS_SFT 0 /* - * The sequence ID is used by the driver for tracking multiple - * commands. This ID is treated as opaque data by the firmware and - * the value is returned in the `hwrm_resp_hdr` upon completion. + * This value indicated the offset in bytes from the beginning of + * the packet where the inner payload starts. This value is valid + * for TCP, UDP, FCoE and RoCE packets */ - uint16_t seq_id; + uint8_t payload_offset; /* - * The target ID of the command: - * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors - * * 0xFFFF - HWRM + * The value is the total number of aggregation buffers that were + * used in the TPA operation. All TPA aggregation buffer completions + * precede the TPA End completion. If the value is zero, then the + * aggregation is completely contained in the buffer space provided + * in the aggregation start completion. + * Note that the field is simply provided as a cross check. */ - uint16_t target_id; + uint8_t tpa_agg_bufs; /* - * A physical address pointer pointing to a host buffer that the - * command's response data will be written. This can be either a host - * physical address (HPA) or a guest physical address (GPA) and must - * point to a physically contiguous block of memory. + * This value is the valid when TPA completion is active. It + * indicates the length of the longest segment of the TPA operation + * for LRO mode and the length of the first segment in GRO mode. + * + * This value may be used by GRO software to re-construct the original + * packet stream from the TPA packet. This is the length of all + * but the last segment for GRO. In LRO mode this value may be used + * to indicate MSS size to the stack. */ - uint64_t resp_addr; - uint32_t enables; + uint16_t tpa_seg_len; + uint16_t unused_1; + uint16_t errors_v2; /* - * This bit must be '1' for the mtu field to be - * configured. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_MTU \ - UINT32_C(0x1) + #define RX_TPA_V2_END_CMPL_V2 UINT32_C(0x1) + #define RX_TPA_V2_END_CMPL_ERRORS_MASK \ + UINT32_C(0xfffe) + #define RX_TPA_V2_END_CMPL_ERRORS_SFT 1 /* - * This bit must be '1' for the guest_vlan field to be - * configured. + * This error indicates that there was some sort of problem with + * the BDs for the packet that was found after part of the + * packet was already placed. The packet should be treated as + * invalid. */ - #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_GUEST_VLAN \ - UINT32_C(0x2) + #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_MASK \ + UINT32_C(0xe) + #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_SFT 1 + /* No buffer error */ + #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_NO_BUFFER \ + (UINT32_C(0x0) << 1) /* - * This bit must be '1' for the async_event_cr field to be - * configured. + * This error occurs when there is a fatal HW problem in + * the chip only. It indicates that there were not + * BDs on chip but that there was adequate reservation. + * provided by the TPA block. */ - #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_ASYNC_EVENT_CR \ - UINT32_C(0x4) + #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_NOT_ON_CHIP \ + (UINT32_C(0x2) << 1) /* - * This bit must be '1' for the dflt_mac_addr field to be - * configured. + * Bad Format: + * BDs were not formatted correctly. */ - #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_DFLT_MAC_ADDR \ - UINT32_C(0x8) + #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT \ + (UINT32_C(0x3) << 1) /* - * This bit must be '1' for the num_rsscos_ctxs field to be - * configured. + * This error occurs when TPA block was not configured to + * reserve adequate BDs for TPA operations on this RX + * ring. All data for the TPA operation was not placed. + * + * This error can also be generated when the number of + * segments is not programmed correctly in TPA and the + * 33 total aggregation buffers allowed for the TPA + * operation has been exceeded. */ - #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_RSSCOS_CTXS \ - UINT32_C(0x10) + #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_RSV_ERROR \ + (UINT32_C(0x4) << 1) /* - * This bit must be '1' for the num_cmpl_rings field to be - * configured. + * Flush: + * There was a bad_format error on the previous operation */ - #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_CMPL_RINGS \ - UINT32_C(0x20) + #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_FLUSH \ + (UINT32_C(0x5) << 1) + #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_LAST \ + RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_FLUSH + uint16_t unused_2; /* - * This bit must be '1' for the num_tx_rings field to be - * configured. - */ - #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_TX_RINGS \ - UINT32_C(0x40) + * This is the opaque value that was completed for the TPA start + * completion that corresponds to this TPA end completion. + */ + uint32_t start_opaque; +} __rte_packed; + +/* + * This TPA completion structure is used on devices where the + * `hwrm_vnic_qcaps.max_aggs_supported` value is greater than 0. + */ +/* rx_tpa_v2_abuf_cmpl (size:128b/16B) */ +struct rx_tpa_v2_abuf_cmpl { + uint16_t type; /* - * This bit must be '1' for the num_rx_rings field to be - * configured. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_RX_RINGS \ - UINT32_C(0x80) + #define RX_TPA_V2_ABUF_CMPL_TYPE_MASK UINT32_C(0x3f) + #define RX_TPA_V2_ABUF_CMPL_TYPE_SFT 0 /* - * This bit must be '1' for the num_l2_ctxs field to be - * configured. + * RX TPA Aggregation Buffer completion : + * Completion of an L2 aggregation buffer in support of + * TPA packet completion. Length = 16B */ - #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_L2_CTXS \ - UINT32_C(0x100) + #define RX_TPA_V2_ABUF_CMPL_TYPE_RX_TPA_AGG UINT32_C(0x16) + #define RX_TPA_V2_ABUF_CMPL_TYPE_LAST \ + RX_TPA_V2_ABUF_CMPL_TYPE_RX_TPA_AGG /* - * This bit must be '1' for the num_vnics field to be - * configured. + * This is the length of the data for the packet stored in this + * aggregation buffer identified by the opaque value. This does not + * include the length of any + * data placed in other aggregation BDs or in the packet or buffer + * BDs. This length does not include any space added due to + * hdr_offset register during HDS placement mode. */ - #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_VNICS \ - UINT32_C(0x200) + uint16_t len; /* - * This bit must be '1' for the num_stat_ctxs field to be - * configured. + * This is a copy of the opaque field from the RX BD this aggregation + * buffer corresponds to. */ - #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_STAT_CTXS \ - UINT32_C(0x400) + uint32_t opaque; + uint16_t v; /* - * This bit must be '1' for the num_hw_ring_grps field to be - * configured. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_HW_RING_GRPS \ - UINT32_C(0x800) + #define RX_TPA_V2_ABUF_CMPL_V UINT32_C(0x1) /* - * The maximum transmission unit requested on the function. - * The HWRM should make sure that the mtu of - * the function does not exceed the mtu of the physical - * port that this function is associated with. - * - * In addition to requesting mtu per function, it is - * possible to configure mtu per transmit ring. - * By default, the mtu of each transmit ring associated - * with a function is equal to the mtu of the function. - * The HWRM should make sure that the mtu of each transmit - * ring that is assigned to a function has a valid mtu. + * This is the aggregation ID that the completion is associated with. Use + * this number to correlate the TPA agg completion with the TPA start + * completion and the TPA end completion. */ - uint16_t mtu; + uint16_t agg_id; + uint32_t unused_1; +} __rte_packed; + +/* rx_abuf_cmpl (size:128b/16B) */ +struct rx_abuf_cmpl { + uint16_t type; /* - * The guest VLAN for the function being configured. - * This field's format is same as 802.1Q Tag's - * Tag Control Information (TCI) format that includes both - * Priority Code Point (PCP) and VLAN Identifier (VID). + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - uint16_t guest_vlan; + #define RX_ABUF_CMPL_TYPE_MASK UINT32_C(0x3f) + #define RX_ABUF_CMPL_TYPE_SFT 0 /* - * ID of the target completion ring for receiving asynchronous - * event completions. If this field is not valid, then the - * HWRM shall use the default completion ring of the function - * that is being configured as the target completion ring for - * providing any asynchronous event completions for that - * function. - * If this field is valid, then the HWRM shall use the - * completion ring identified by this ID as the target - * completion ring for providing any asynchronous event - * completions for the function that is being configured. + * RX Aggregation Buffer completion : + * Completion of an L2 aggregation buffer in support of + * TPA, HDS, or Jumbo packet completion. Length = 16B */ - uint16_t async_event_cr; + #define RX_ABUF_CMPL_TYPE_RX_AGG UINT32_C(0x12) + #define RX_ABUF_CMPL_TYPE_LAST RX_ABUF_CMPL_TYPE_RX_AGG /* - * This value is the current MAC address requested by the VF - * driver to be configured on this VF. A value of - * 00-00-00-00-00-00 indicates no MAC address configuration - * is requested by the VF driver. - * The parent PF driver may reject or overwrite this - * MAC address. + * This is the length of the data for the packet stored in this + * aggregation buffer identified by the opaque value. This does not + * include the length of any + * data placed in other aggregation BDs or in the packet or buffer + * BDs. This length does not include any space added due to + * hdr_offset register during HDS placement mode. */ - uint8_t dflt_mac_addr[6]; - uint32_t flags; + uint16_t len; /* - * This bit requests that the firmware test to see if all the assets - * requested in this command (i.e. number of TX rings) are available. - * The firmware will return an error if the requested assets are - * not available. The firwmare will NOT reserve the assets if they - * are available. + * This is a copy of the opaque field from the RX BD this aggregation + * buffer corresponds to. */ - #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_TX_ASSETS_TEST \ - UINT32_C(0x1) + uint32_t opaque; + uint32_t v; /* - * This bit requests that the firmware test to see if all the assets - * requested in this command (i.e. number of RX rings) are available. - * The firmware will return an error if the requested assets are - * not available. The firwmare will NOT reserve the assets if they - * are available. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_RX_ASSETS_TEST \ - UINT32_C(0x2) + #define RX_ABUF_CMPL_V UINT32_C(0x1) + /* unused3 is 32 b */ + uint32_t unused_2; +} __rte_packed; + +/* VEE FLUSH Completion Record (16 bytes) */ +/* vee_flush (size:128b/16B) */ +struct vee_flush { + uint32_t downstream_path_type; /* - * This bit requests that the firmware test to see if all the assets - * requested in this command (i.e. number of CMPL rings) are available. - * The firmware will return an error if the requested assets are - * not available. The firwmare will NOT reserve the assets if they - * are available. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_CMPL_ASSETS_TEST \ - UINT32_C(0x4) + #define VEE_FLUSH_TYPE_MASK UINT32_C(0x3f) + #define VEE_FLUSH_TYPE_SFT 0 + /* + * VEE Flush Completion: + * This completion is inserted manually by the Primate and processed + * by the VEE hardware to ensure that all completions on a VEE + * function have been processed by the VEE hardware before FLR + * process is completed. + */ + #define VEE_FLUSH_TYPE_VEE_FLUSH UINT32_C(0x1c) + #define VEE_FLUSH_TYPE_LAST VEE_FLUSH_TYPE_VEE_FLUSH + /* downstream_path is 1 b */ + #define VEE_FLUSH_DOWNSTREAM_PATH UINT32_C(0x40) + /* This completion is associated with VEE Transmit */ + #define VEE_FLUSH_DOWNSTREAM_PATH_TX (UINT32_C(0x0) << 6) + /* This completion is associated with VEE Receive */ + #define VEE_FLUSH_DOWNSTREAM_PATH_RX (UINT32_C(0x1) << 6) + #define VEE_FLUSH_DOWNSTREAM_PATH_LAST VEE_FLUSH_DOWNSTREAM_PATH_RX + /* + * This is an opaque value that is passed through the completion + * to the VEE handler SW and is used to indicate what VEE VQ or + * function has completed FLR processing. + */ + uint32_t opaque; + uint32_t v; /* - * This bit requests that the firmware test to see if all the assets - * requested in this command (i.e. number of RSS ctx) are available. - * The firmware will return an error if the requested assets are - * not available. The firwmare will NOT reserve the assets if they - * are available. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes will + * write 1. The odd passes will write 0. */ - #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_RSSCOS_CTX_ASSETS_TEST \ - UINT32_C(0x8) + #define VEE_FLUSH_V UINT32_C(0x1) + /* unused3 is 32 b */ + uint32_t unused_3; +} __rte_packed; + +/* eject_cmpl (size:128b/16B) */ +struct eject_cmpl { + uint16_t type; /* - * This bit requests that the firmware test to see if all the assets - * requested in this command (i.e. number of ring groups) are available. - * The firmware will return an error if the requested assets are - * not available. The firwmare will NOT reserve the assets if they - * are available. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_RING_GRP_ASSETS_TEST \ - UINT32_C(0x10) + #define EJECT_CMPL_TYPE_MASK UINT32_C(0x3f) + #define EJECT_CMPL_TYPE_SFT 0 /* - * This bit requests that the firmware test to see if all the assets - * requested in this command (i.e. number of stat ctx) are available. - * The firmware will return an error if the requested assets are - * not available. The firwmare will NOT reserve the assets if they - * are available. + * Statistics Ejection Completion: + * Completion of statistics data ejection buffer. + * Length = 16B */ - #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_STAT_CTX_ASSETS_TEST \ - UINT32_C(0x20) + #define EJECT_CMPL_TYPE_STAT_EJECT UINT32_C(0x1a) + #define EJECT_CMPL_TYPE_LAST EJECT_CMPL_TYPE_STAT_EJECT + #define EJECT_CMPL_FLAGS_MASK UINT32_C(0xffc0) + #define EJECT_CMPL_FLAGS_SFT 6 /* - * This bit requests that the firmware test to see if all the assets - * requested in this command (i.e. number of VNICs) are available. - * The firmware will return an error if the requested assets are - * not available. The firwmare will NOT reserve the assets if they - * are available. + * When this bit is '1', it indicates a packet that has an + * error of some type. Type of error is indicated in + * error_flags. */ - #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_VNIC_ASSETS_TEST \ - UINT32_C(0x40) + #define EJECT_CMPL_FLAGS_ERROR UINT32_C(0x40) /* - * This bit requests that the firmware test to see if all the assets - * requested in this command (i.e. number of L2 ctx) are available. - * The firmware will return an error if the requested assets are - * not available. The firwmare will NOT reserve the assets if they - * are available. + * This is the length of the statistics data stored in this + * buffer. */ - #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_L2_CTX_ASSETS_TEST \ - UINT32_C(0x80) - /* The number of RSS/COS contexts requested for the VF. */ - uint16_t num_rsscos_ctxs; - /* The number of completion rings requested for the VF. */ - uint16_t num_cmpl_rings; - /* The number of transmit rings requested for the VF. */ - uint16_t num_tx_rings; - /* The number of receive rings requested for the VF. */ - uint16_t num_rx_rings; - /* The number of L2 contexts requested for the VF. */ - uint16_t num_l2_ctxs; - /* The number of vnics requested for the VF. */ - uint16_t num_vnics; - /* The number of statistic contexts requested for the VF. */ - uint16_t num_stat_ctxs; - /* The number of HW ring groups requested for the VF. */ - uint16_t num_hw_ring_grps; - uint8_t unused_0[4]; -} __attribute__((packed)); - -/* hwrm_func_vf_cfg_output (size:128b/16B) */ -struct hwrm_func_vf_cfg_output { - /* The specific error status for the command. */ - uint16_t error_code; - /* The HWRM command request type. */ - uint16_t req_type; - /* The sequence ID from the original command. */ - uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; - uint8_t unused_0[7]; + uint16_t len; /* - * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' - * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. + * This is a copy of the opaque field from the RX BD this ejection + * buffer corresponds to. */ - uint8_t valid; -} __attribute__((packed)); - -/******************* - * hwrm_func_qcaps * - *******************/ - - -/* hwrm_func_qcaps_input (size:192b/24B) */ -struct hwrm_func_qcaps_input { - /* The HWRM command request type. */ - uint16_t req_type; + uint32_t opaque; + uint16_t v; /* - * The completion ring to send the completion event on. This should - * be the NQ ID returned from the `nq_alloc` HWRM command. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - uint16_t cmpl_ring; + #define EJECT_CMPL_V UINT32_C(0x1) + #define EJECT_CMPL_ERRORS_MASK UINT32_C(0xfffe) + #define EJECT_CMPL_ERRORS_SFT 1 /* - * The sequence ID is used by the driver for tracking multiple - * commands. This ID is treated as opaque data by the firmware and - * the value is returned in the `hwrm_resp_hdr` upon completion. + * This error indicates that there was some sort of problem with + * the BDs for statistics ejection. The statistics ejection should + * be treated as invalid */ - uint16_t seq_id; + #define EJECT_CMPL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe) + #define EJECT_CMPL_ERRORS_BUFFER_ERROR_SFT 1 + /* No buffer error */ + #define EJECT_CMPL_ERRORS_BUFFER_ERROR_NO_BUFFER \ + (UINT32_C(0x0) << 1) /* - * The target ID of the command: - * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors - * * 0xFFFF - HWRM + * Did Not Fit: + * Statistics did not fit into aggregation buffer provided. */ - uint16_t target_id; + #define EJECT_CMPL_ERRORS_BUFFER_ERROR_DID_NOT_FIT \ + (UINT32_C(0x1) << 1) /* - * A physical address pointer pointing to a host buffer that the - * command's response data will be written. This can be either a host - * physical address (HPA) or a guest physical address (GPA) and must - * point to a physically contiguous block of memory. + * Bad Format: + * BDs were not formatted correctly. */ - uint64_t resp_addr; + #define EJECT_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT \ + (UINT32_C(0x3) << 1) /* - * Function ID of the function that is being queried. - * 0xFF... (All Fs) if the query is for the requesting - * function. + * Flush: + * There was a bad_format error on the previous operation */ - uint16_t fid; - uint8_t unused_0[6]; -} __attribute__((packed)); + #define EJECT_CMPL_ERRORS_BUFFER_ERROR_FLUSH \ + (UINT32_C(0x5) << 1) + #define EJECT_CMPL_ERRORS_BUFFER_ERROR_LAST \ + EJECT_CMPL_ERRORS_BUFFER_ERROR_FLUSH + /* reserved16 is 16 b */ + uint16_t reserved16; + /* unused3 is 32 b */ + uint32_t unused_2; +} __rte_packed; -/* hwrm_func_qcaps_output (size:640b/80B) */ -struct hwrm_func_qcaps_output { - /* The specific error status for the command. */ - uint16_t error_code; - /* The HWRM command request type. */ - uint16_t req_type; - /* The sequence ID from the original command. */ - uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; +/* hwrm_cmpl (size:128b/16B) */ +struct hwrm_cmpl { + uint16_t type; /* - * FID value. This value is used to identify operations on the PCI - * bus as belonging to a particular PCI function. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - uint16_t fid; + #define HWRM_CMPL_TYPE_MASK UINT32_C(0x3f) + #define HWRM_CMPL_TYPE_SFT 0 /* - * Port ID of port that this function is associated with. - * Valid only for the PF. - * 0xFF... (All Fs) if this function is not associated with - * any port. - * 0xFF... (All Fs) if this function is called from a VF. + * HWRM Command Completion: + * Completion of an HWRM command. */ - uint16_t port_id; - uint32_t flags; - /* If 1, then Push mode is supported on this function. */ - #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PUSH_MODE_SUPPORTED \ - UINT32_C(0x1) + #define HWRM_CMPL_TYPE_HWRM_DONE UINT32_C(0x20) + #define HWRM_CMPL_TYPE_LAST HWRM_CMPL_TYPE_HWRM_DONE + /* This is the sequence_id of the HWRM command that has completed. */ + uint16_t sequence_id; + /* unused2 is 32 b */ + uint32_t unused_1; + uint32_t v; /* - * If 1, then the global MSI-X auto-masking is enabled for the - * device. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_GLOBAL_MSIX_AUTOMASKING \ - UINT32_C(0x2) + #define HWRM_CMPL_V UINT32_C(0x1) + /* unused4 is 32 b */ + uint32_t unused_3; +} __rte_packed; + +/* hwrm_fwd_req_cmpl (size:128b/16B) */ +struct hwrm_fwd_req_cmpl { /* - * If 1, then the Precision Time Protocol (PTP) processing - * is supported on this function. - * The HWRM should enable PTP on only a single Physical - * Function (PF) per port. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PTP_SUPPORTED \ - UINT32_C(0x4) + uint16_t req_len_type; /* - * If 1, then RDMA over Converged Ethernet (RoCE) v1 - * is supported on this function. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ROCE_V1_SUPPORTED \ - UINT32_C(0x8) + #define HWRM_FWD_REQ_CMPL_TYPE_MASK UINT32_C(0x3f) + #define HWRM_FWD_REQ_CMPL_TYPE_SFT 0 + /* Forwarded HWRM Request */ + #define HWRM_FWD_REQ_CMPL_TYPE_HWRM_FWD_REQ UINT32_C(0x22) + #define HWRM_FWD_REQ_CMPL_TYPE_LAST \ + HWRM_FWD_REQ_CMPL_TYPE_HWRM_FWD_REQ + /* Length of forwarded request in bytes. */ + #define HWRM_FWD_REQ_CMPL_REQ_LEN_MASK UINT32_C(0xffc0) + #define HWRM_FWD_REQ_CMPL_REQ_LEN_SFT 6 /* - * If 1, then RDMA over Converged Ethernet (RoCE) v2 - * is supported on this function. + * Source ID of this request. + * Typically used in forwarding requests and responses. + * 0x0 - 0xFFF8 - Used for function ids + * 0xFFF8 - 0xFFFE - Reserved for internal processors + * 0xFFFF - HWRM */ - #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ROCE_V2_SUPPORTED \ - UINT32_C(0x10) + uint16_t source_id; + /* unused1 is 32 b */ + uint32_t unused0; + /* Address of forwarded request. */ + uint32_t req_buf_addr_v[2]; /* - * If 1, then control and configuration of WoL magic packet - * are supported on this function. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_WOL_MAGICPKT_SUPPORTED \ - UINT32_C(0x20) + #define HWRM_FWD_REQ_CMPL_V UINT32_C(0x1) + /* Address of forwarded request. */ + #define HWRM_FWD_REQ_CMPL_REQ_BUF_ADDR_MASK UINT32_C(0xfffffffe) + #define HWRM_FWD_REQ_CMPL_REQ_BUF_ADDR_SFT 1 +} __rte_packed; + +/* hwrm_fwd_resp_cmpl (size:128b/16B) */ +struct hwrm_fwd_resp_cmpl { + uint16_t type; /* - * If 1, then control and configuration of bitmap pattern - * packet are supported on this function. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_WOL_BMP_SUPPORTED \ - UINT32_C(0x40) + #define HWRM_FWD_RESP_CMPL_TYPE_MASK UINT32_C(0x3f) + #define HWRM_FWD_RESP_CMPL_TYPE_SFT 0 + /* Forwarded HWRM Response */ + #define HWRM_FWD_RESP_CMPL_TYPE_HWRM_FWD_RESP UINT32_C(0x24) + #define HWRM_FWD_RESP_CMPL_TYPE_LAST \ + HWRM_FWD_RESP_CMPL_TYPE_HWRM_FWD_RESP /* - * If set to 1, then the control and configuration of rate limit - * of an allocated TX ring on the queried function is supported. + * Source ID of this response. + * Typically used in forwarding requests and responses. + * 0x0 - 0xFFF8 - Used for function ids + * 0xFFF8 - 0xFFFE - Reserved for internal processors + * 0xFFFF - HWRM */ - #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_TX_RING_RL_SUPPORTED \ - UINT32_C(0x80) + uint16_t source_id; + /* Length of forwarded response in bytes. */ + uint16_t resp_len; + /* unused2 is 16 b */ + uint16_t unused_1; + /* Address of forwarded request. */ + uint32_t resp_buf_addr_v[2]; /* - * If 1, then control and configuration of minimum and - * maximum bandwidths are supported on the queried function. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_TX_BW_CFG_SUPPORTED \ - UINT32_C(0x100) + #define HWRM_FWD_RESP_CMPL_V UINT32_C(0x1) + /* Address of forwarded request. */ + #define HWRM_FWD_RESP_CMPL_RESP_BUF_ADDR_MASK UINT32_C(0xfffffffe) + #define HWRM_FWD_RESP_CMPL_RESP_BUF_ADDR_SFT 1 +} __rte_packed; + +/* hwrm_async_event_cmpl (size:128b/16B) */ +struct hwrm_async_event_cmpl { + uint16_t type; /* - * If the query is for a VF, then this flag shall be ignored. - * If this query is for a PF and this flag is set to 1, - * then the PF has the capability to set the rate limits - * on the TX rings of its children VFs. - * If this query is for a PF and this flag is set to 0, then - * the PF does not have the capability to set the rate limits - * on the TX rings of its children VFs. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_VF_TX_RING_RL_SUPPORTED \ - UINT32_C(0x200) + #define HWRM_ASYNC_EVENT_CMPL_TYPE_MASK UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_TYPE_SFT 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_TYPE_HWRM_ASYNC_EVENT UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* Link status changed */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_STATUS_CHANGE \ + UINT32_C(0x0) + /* Link MTU changed */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_MTU_CHANGE \ + UINT32_C(0x1) + /* Link speed changed */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CHANGE \ + UINT32_C(0x2) + /* DCB Configuration changed */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_DCB_CONFIG_CHANGE \ + UINT32_C(0x3) + /* Port connection not allowed */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PORT_CONN_NOT_ALLOWED \ + UINT32_C(0x4) + /* Link speed configuration was not allowed */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CFG_NOT_ALLOWED \ + UINT32_C(0x5) + /* Link speed configuration change */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CFG_CHANGE \ + UINT32_C(0x6) + /* Port PHY configuration change */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PORT_PHY_CFG_CHANGE \ + UINT32_C(0x7) + /* Reset notification to clients */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_RESET_NOTIFY \ + UINT32_C(0x8) + /* Master function selection event */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_ERROR_RECOVERY \ + UINT32_C(0x9) + /* Function driver unloaded */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_DRVR_UNLOAD \ + UINT32_C(0x10) + /* Function driver loaded */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_DRVR_LOAD \ + UINT32_C(0x11) + /* Function FLR related processing has completed */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_FLR_PROC_CMPLT \ + UINT32_C(0x12) + /* PF driver unloaded */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_DRVR_UNLOAD \ + UINT32_C(0x20) + /* PF driver loaded */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_DRVR_LOAD \ + UINT32_C(0x21) + /* VF Function Level Reset (FLR) */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_FLR \ + UINT32_C(0x30) + /* VF MAC Address Change */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_MAC_ADDR_CHANGE \ + UINT32_C(0x31) + /* PF-VF communication channel status change. */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_VF_COMM_STATUS_CHANGE \ + UINT32_C(0x32) + /* VF Configuration Change */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_CFG_CHANGE \ + UINT32_C(0x33) + /* LLFC/PFC Configuration Change */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LLFC_PFC_CHANGE \ + UINT32_C(0x34) + /* Default VNIC Configuration Change */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_DEFAULT_VNIC_CHANGE \ + UINT32_C(0x35) + /* HW flow aged */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_HW_FLOW_AGED \ + UINT32_C(0x36) /* - * If the query is for a VF, then this flag shall be ignored. - * If this query is for a PF and this flag is set to 1, - * then the PF has the capability to set the minimum and/or - * maximum bandwidths for its children VFs. - * If this query is for a PF and this flag is set to 0, then - * the PF does not have the capability to set the minimum or - * maximum bandwidths for its children VFs. + * A debug notification being posted to the driver. These + * notifications are purely for diagnostic purpose and should not be + * used for functional purpose. The driver is not supposed to act + * on these messages except to log/record it. */ - #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_VF_BW_CFG_SUPPORTED \ - UINT32_C(0x400) + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_DEBUG_NOTIFICATION \ + UINT32_C(0x37) /* - * Standard TX Ring mode is used for the allocation of TX ring - * and underlying scheduling resources that allow bandwidth - * reservation and limit settings on the queried function. - * If set to 1, then standard TX ring mode is supported - * on the queried function. - * If set to 0, then standard TX ring mode is not available - * on the queried function. + * An EEM flow cached memory flush for all flows request event being + * posted to the PF driver. */ - #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_STD_TX_RING_MODE_SUPPORTED \ - UINT32_C(0x800) + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_EEM_CACHE_FLUSH_REQ \ + UINT32_C(0x38) /* - * If the query is for a VF, then this flag shall be ignored, - * If this query is for a PF and this flag is set to 1, - * then the PF has the capability to detect GENEVE tunnel - * flags. + * An EEM flow cache memory flush completion event being posted to the + * firmware by the PF driver. This is indication that host EEM flush + * has completed by the PF. */ - #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_GENEVE_TUN_FLAGS_SUPPORTED \ - UINT32_C(0x1000) + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_EEM_CACHE_FLUSH_DONE \ + UINT32_C(0x39) /* - * If the query is for a VF, then this flag shall be ignored, - * If this query is for a PF and this flag is set to 1, - * then the PF has the capability to detect NVGRE tunnel - * flags. + * A tcp flag action change event being posted to the PF or trusted VF + * driver by the firmware. The PF or trusted VF driver should query + * the firmware for the new TCP flag action update after receiving + * this async event. */ - #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_NVGRE_TUN_FLAGS_SUPPORTED \ - UINT32_C(0x2000) + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_TCP_FLAG_ACTION_CHANGE \ + UINT32_C(0x3a) /* - * If the query is for a VF, then this flag shall be ignored, - * If this query is for a PF and this flag is set to 1, - * then the PF has the capability to detect GRE tunnel - * flags. + * An EEM flow active event being posted to the PF or trusted VF driver + * by the firmware. The PF or trusted VF driver should update the + * flow's aging timer after receiving this async event. */ - #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_GRE_TUN_FLAGS_SUPPORTED \ - UINT32_C(0x4000) + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_EEM_FLOW_ACTIVE \ + UINT32_C(0x3b) /* - * If the query is for a VF, then this flag shall be ignored, - * If this query is for a PF and this flag is set to 1, - * then the PF has the capability to detect MPLS tunnel - * flags. + * A eem cfg change event being posted to the trusted VF driver by the + * firmware if the parent PF EEM configuration changed. */ - #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_MPLS_TUN_FLAGS_SUPPORTED \ - UINT32_C(0x8000) + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_EEM_CFG_CHANGE \ + UINT32_C(0x3c) /* - * If the query is for a VF, then this flag shall be ignored, - * If this query is for a PF and this flag is set to 1, - * then the PF has the capability to support pcie stats. + * Deprecated. + * TFLIB unique default VNIC Configuration Change */ - #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PCIE_STATS_SUPPORTED \ - UINT32_C(0x10000) + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_TFLIB_DEFAULT_VNIC_CHANGE \ + UINT32_C(0x3d) /* - * If the query is for a VF, then this flag shall be ignored, - * If this query is for a PF and this flag is set to 1, - * then the PF has the capability to adopt the VF's belonging - * to another PF. + * Deprecated. + * TFLIB unique link status changed */ - #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ADOPTED_PF_SUPPORTED \ - UINT32_C(0x20000) + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_TFLIB_LINK_STATUS_CHANGE \ + UINT32_C(0x3e) /* - * If the query is for a VF, then this flag shall be ignored, - * If this query is for a PF and this flag is set to 1, - * then the PF has the capability to administer another PF. + * An event signifying completion for HWRM_FW_STATE_QUIESCE + * (completion, timeout, or error) */ - #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ADMIN_PF_SUPPORTED \ - UINT32_C(0x40000) + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_QUIESCE_DONE \ + UINT32_C(0x3f) /* - * If the query is for a VF, then this flag shall be ignored. - * If this query is for a PF and this flag is set to 1, then - * the PF will know that the firmware has the capability to track - * the virtual link status. + * An event signifying a HWRM command is in progress and its + * response will be deferred. This event is used on crypto controllers + * only. */ - #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_LINK_ADMIN_STATUS_SUPPORTED \ - UINT32_C(0x80000) + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_DEFERRED_RESPONSE \ + UINT32_C(0x40) /* - * If 1, then this function supports the push mode that uses - * write combine buffers and the long inline tx buffer descriptor. + * An event signifying that a PFC WatchDog configuration + * has changed on any port / cos. */ - #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_WCB_PUSH_MODE \ - UINT32_C(0x100000) + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PFC_WATCHDOG_CFG_CHANGE \ + UINT32_C(0x41) /* - * This value is current MAC address configured for this - * function. A value of 00-00-00-00-00-00 indicates no - * MAC address is currently configured. + * A trace log message. This contains firmware trace logs string + * embedded in the asynchronous message. This is an experimental + * event, not meant for production use at this time. */ - uint8_t mac_address[6]; + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FW_TRACE_MSG \ + UINT32_C(0xfe) + /* HWRM Error */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_HWRM_ERROR \ + UINT32_C(0xff) + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_EVENT_ID_HWRM_ERROR + /* Event specific data */ + uint32_t event_data2; + uint8_t opaque_v; /* - * The maximum number of RSS/COS contexts that can be - * allocated to the function. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - uint16_t max_rsscos_ctx; + #define HWRM_ASYNC_EVENT_CMPL_V UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_OPAQUE_MASK UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; +} __rte_packed; + +/* hwrm_async_event_cmpl_link_status_change (size:128b/16B) */ +struct hwrm_async_event_cmpl_link_status_change { + uint16_t type; /* - * The maximum number of completion rings that can be - * allocated to the function. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - uint16_t max_cmpl_rings; + #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_TYPE_SFT 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* Link status changed */ + #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_ID_LINK_STATUS_CHANGE \ + UINT32_C(0x0) + #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_ID_LINK_STATUS_CHANGE + /* Event specific data */ + uint32_t event_data2; + uint8_t opaque_v; /* - * The maximum number of transmit rings that can be - * allocated to the function. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - uint16_t max_tx_rings; + #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_V \ + UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_OPAQUE_MASK \ + UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; + /* Indicates link status change */ + #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_LINK_CHANGE \ + UINT32_C(0x1) /* - * The maximum number of receive rings that can be - * allocated to the function. + * If this bit set to 0, then it indicates that the link + * was up and it went down. */ - uint16_t max_rx_rings; + #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_LINK_CHANGE_DOWN \ + UINT32_C(0x0) /* - * The maximum number of L2 contexts that can be - * allocated to the function. + * If this bit is set to 1, then it indicates that the link + * was down and it went up. */ - uint16_t max_l2_ctxs; + #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_LINK_CHANGE_UP \ + UINT32_C(0x1) + #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_LINK_CHANGE_LAST \ + HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_LINK_CHANGE_UP + /* Indicates the physical port this link status change occur */ + #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PORT_MASK \ + UINT32_C(0xe) + #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PORT_SFT \ + 1 + /* PORT ID */ + #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PORT_ID_MASK \ + UINT32_C(0xffff0) + #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PORT_ID_SFT \ + 4 + /* Indicates the physical function this event occurred on. */ + #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PF_ID_MASK \ + UINT32_C(0xff00000) + #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PF_ID_SFT \ + 20 +} __rte_packed; + +/* hwrm_async_event_cmpl_link_mtu_change (size:128b/16B) */ +struct hwrm_async_event_cmpl_link_mtu_change { + uint16_t type; /* - * The maximum number of VNICs that can be - * allocated to the function. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - uint16_t max_vnics; + #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_SFT 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* Link MTU changed */ + #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_ID_LINK_MTU_CHANGE \ + UINT32_C(0x1) + #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_ID_LINK_MTU_CHANGE + /* Event specific data */ + uint32_t event_data2; + uint8_t opaque_v; /* - * The identifier for the first VF enabled on a PF. This - * is valid only on the PF with SR-IOV enabled. - * 0xFF... (All Fs) if this command is called on a PF with - * SR-IOV disabled or on a VF. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - uint16_t first_vf_id; + #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_V UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_OPAQUE_MASK \ + UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; + /* The new MTU of the link in bytes. */ + #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_DATA1_NEW_MTU_MASK \ + UINT32_C(0xffff) + #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_DATA1_NEW_MTU_SFT 0 +} __rte_packed; + +/* hwrm_async_event_cmpl_link_speed_change (size:128b/16B) */ +struct hwrm_async_event_cmpl_link_speed_change { + uint16_t type; /* - * The maximum number of VFs that can be - * allocated to the function. This is valid only on the - * PF with SR-IOV enabled. 0xFF... (All Fs) if this - * command is called on a PF with SR-IOV disabled or - * on a VF. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - uint16_t max_vfs; + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_TYPE_SFT 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* Link speed changed */ + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_ID_LINK_SPEED_CHANGE \ + UINT32_C(0x2) + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_ID_LINK_SPEED_CHANGE + /* Event specific data */ + uint32_t event_data2; + uint8_t opaque_v; /* - * The maximum number of statistic contexts that can be - * allocated to the function. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - uint16_t max_stat_ctx; + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_V \ + UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_OPAQUE_MASK \ + UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; /* - * The maximum number of Encapsulation records that can be - * offloaded by this function. - */ - uint32_t max_encap_records; - /* - * The maximum number of decapsulation records that can - * be offloaded by this function. - */ - uint32_t max_decap_records; - /* - * The maximum number of Exact Match (EM) flows that can be - * offloaded by this function on the TX side. - */ - uint32_t max_tx_em_flows; - /* - * The maximum number of Wildcard Match (WM) flows that can - * be offloaded by this function on the TX side. + * When this bit is '1', the link was forced to the + * force_link_speed value. */ - uint32_t max_tx_wm_flows; + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_FORCE \ + UINT32_C(0x1) + /* The new link speed in 100 Mbps units. */ + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_MASK \ + UINT32_C(0xfffe) + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_SFT \ + 1 + /* 100Mb link speed */ + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_100MB \ + (UINT32_C(0x1) << 1) + /* 1Gb link speed */ + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_1GB \ + (UINT32_C(0xa) << 1) + /* 2Gb link speed */ + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_2GB \ + (UINT32_C(0x14) << 1) + /* 25Gb link speed */ + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_2_5GB \ + (UINT32_C(0x19) << 1) + /* 10Gb link speed */ + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_10GB \ + (UINT32_C(0x64) << 1) + /* 20Mb link speed */ + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_20GB \ + (UINT32_C(0xc8) << 1) + /* 25Gb link speed */ + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_25GB \ + (UINT32_C(0xfa) << 1) + /* 40Gb link speed */ + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_40GB \ + (UINT32_C(0x190) << 1) + /* 50Gb link speed */ + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_50GB \ + (UINT32_C(0x1f4) << 1) + /* 100Gb link speed */ + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_100GB \ + (UINT32_C(0x3e8) << 1) + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_LAST \ + HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_100GB + /* PORT ID */ + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_PORT_ID_MASK \ + UINT32_C(0xffff0000) + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_PORT_ID_SFT \ + 16 +} __rte_packed; + +/* hwrm_async_event_cmpl_dcb_config_change (size:128b/16B) */ +struct hwrm_async_event_cmpl_dcb_config_change { + uint16_t type; /* - * The maximum number of Exact Match (EM) flows that can be - * offloaded by this function on the RX side. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - uint32_t max_rx_em_flows; + #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_SFT 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* DCB Configuration changed */ + #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_ID_DCB_CONFIG_CHANGE \ + UINT32_C(0x3) + #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_ID_DCB_CONFIG_CHANGE + /* Event specific data */ + uint32_t event_data2; + /* ETS configuration change */ + #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA2_ETS \ + UINT32_C(0x1) + /* PFC configuration change */ + #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA2_PFC \ + UINT32_C(0x2) + /* APP configuration change */ + #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA2_APP \ + UINT32_C(0x4) + uint8_t opaque_v; /* - * The maximum number of Wildcard Match (WM) flows that can - * be offloaded by this function on the RX side. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - uint32_t max_rx_wm_flows; + #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_V \ + UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_OPAQUE_MASK \ + UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; + /* PORT ID */ + #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_PORT_ID_MASK \ + UINT32_C(0xffff) + #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_PORT_ID_SFT \ + 0 + /* Priority recommended for RoCE traffic */ + #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_ROCE_PRIORITY_MASK \ + UINT32_C(0xff0000) + #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_ROCE_PRIORITY_SFT \ + 16 + /* none is 255 */ + #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_ROCE_PRIORITY_NONE \ + (UINT32_C(0xff) << 16) + #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_ROCE_PRIORITY_LAST \ + HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_ROCE_PRIORITY_NONE + /* Priority recommended for L2 traffic */ + #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_L2_PRIORITY_MASK \ + UINT32_C(0xff000000) + #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_L2_PRIORITY_SFT \ + 24 + /* none is 255 */ + #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_L2_PRIORITY_NONE \ + (UINT32_C(0xff) << 24) + #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_L2_PRIORITY_LAST \ + HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_L2_PRIORITY_NONE +} __rte_packed; + +/* hwrm_async_event_cmpl_port_conn_not_allowed (size:128b/16B) */ +struct hwrm_async_event_cmpl_port_conn_not_allowed { + uint16_t type; /* - * The maximum number of multicast filters that can - * be supported by this function on the RX side. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - uint32_t max_mcast_filters; + #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_SFT \ + 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* Port connection not allowed */ + #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_ID_PORT_CONN_NOT_ALLOWED \ + UINT32_C(0x4) + #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_ID_PORT_CONN_NOT_ALLOWED + /* Event specific data */ + uint32_t event_data2; + uint8_t opaque_v; /* - * The maximum value of flow_id that can be supported - * in completion records. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - uint32_t max_flow_id; + #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_V \ + UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_OPAQUE_MASK \ + UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; + /* PORT ID */ + #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_PORT_ID_MASK \ + UINT32_C(0xffff) + #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_PORT_ID_SFT \ + 0 /* - * The maximum number of HW ring groups that can be - * supported on this function. + * This value indicates the current port level enforcement policy + * for the optics module when there is an optical module mismatch + * and port is not connected. */ - uint32_t max_hw_ring_grps; + #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_MASK \ + UINT32_C(0xff0000) + #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_SFT \ + 16 + /* No enforcement */ + #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_NONE \ + (UINT32_C(0x0) << 16) + /* Disable Transmit side Laser. */ + #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_DISABLETX \ + (UINT32_C(0x1) << 16) + /* Raise a warning message. */ + #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_WARNINGMSG \ + (UINT32_C(0x2) << 16) + /* Power down the module. */ + #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_PWRDOWN \ + (UINT32_C(0x3) << 16) + #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_LAST \ + HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_PWRDOWN +} __rte_packed; + +/* hwrm_async_event_cmpl_link_speed_cfg_not_allowed (size:128b/16B) */ +struct hwrm_async_event_cmpl_link_speed_cfg_not_allowed { + uint16_t type; /* - * The maximum number of strict priority transmit rings - * that can be allocated to the function. - * This number indicates the maximum number of TX rings - * that can be assigned strict priorities out of the - * maximum number of TX rings that can be allocated - * (max_tx_rings) to the function. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - uint16_t max_sp_tx_rings; - uint8_t unused_0; + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_SFT \ + 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* Link speed configuration was not allowed */ + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_ID_LINK_SPEED_CFG_NOT_ALLOWED \ + UINT32_C(0x5) + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_ID_LINK_SPEED_CFG_NOT_ALLOWED + /* Event specific data */ + uint32_t event_data2; + uint8_t opaque_v; /* - * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' - * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - uint8_t valid; -} __attribute__((packed)); - -/****************** - * hwrm_func_qcfg * - ******************/ - + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_V \ + UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_OPAQUE_MASK \ + UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; + /* PORT ID */ + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_DATA1_PORT_ID_MASK \ + UINT32_C(0xffff) + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_DATA1_PORT_ID_SFT \ + 0 +} __rte_packed; -/* hwrm_func_qcfg_input (size:192b/24B) */ -struct hwrm_func_qcfg_input { - /* The HWRM command request type. */ - uint16_t req_type; - /* - * The completion ring to send the completion event on. This should - * be the NQ ID returned from the `nq_alloc` HWRM command. - */ - uint16_t cmpl_ring; +/* hwrm_async_event_cmpl_link_speed_cfg_change (size:128b/16B) */ +struct hwrm_async_event_cmpl_link_speed_cfg_change { + uint16_t type; /* - * The sequence ID is used by the driver for tracking multiple - * commands. This ID is treated as opaque data by the firmware and - * the value is returned in the `hwrm_resp_hdr` upon completion. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - uint16_t seq_id; + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_SFT \ + 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* Link speed configuration change */ + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_ID_LINK_SPEED_CFG_CHANGE \ + UINT32_C(0x6) + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_ID_LINK_SPEED_CFG_CHANGE + /* Event specific data */ + uint32_t event_data2; + uint8_t opaque_v; /* - * The target ID of the command: - * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors - * * 0xFFFF - HWRM + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - uint16_t target_id; + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_V \ + UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_OPAQUE_MASK \ + UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; + /* PORT ID */ + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_DATA1_PORT_ID_MASK \ + UINT32_C(0xffff) + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_DATA1_PORT_ID_SFT \ + 0 /* - * A physical address pointer pointing to a host buffer that the - * command's response data will be written. This can be either a host - * physical address (HPA) or a guest physical address (GPA) and must - * point to a physically contiguous block of memory. + * If set to 1, it indicates that the supported link speeds + * configuration on the port has changed. + * If set to 0, then there is no change in supported link speeds + * configuration. */ - uint64_t resp_addr; + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_DATA1_SUPPORTED_LINK_SPEEDS_CHANGE \ + UINT32_C(0x10000) /* - * Function ID of the function that is being queried. - * 0xFF... (All Fs) if the query is for the requesting - * function. + * If set to 1, it indicates that the link speed configuration + * on the port has become illegal or invalid. + * If set to 0, then the link speed configuration on the port is + * legal or valid. */ - uint16_t fid; - uint8_t unused_0[6]; -} __attribute__((packed)); + #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_DATA1_ILLEGAL_LINK_SPEED_CFG \ + UINT32_C(0x20000) +} __rte_packed; -/* hwrm_func_qcfg_output (size:640b/80B) */ -struct hwrm_func_qcfg_output { - /* The specific error status for the command. */ - uint16_t error_code; - /* The HWRM command request type. */ - uint16_t req_type; - /* The sequence ID from the original command. */ - uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; - /* - * FID value. This value is used to identify operations on the PCI - * bus as belonging to a particular PCI function. - */ - uint16_t fid; +/* hwrm_async_event_cmpl_port_phy_cfg_change (size:128b/16B) */ +struct hwrm_async_event_cmpl_port_phy_cfg_change { + uint16_t type; /* - * Port ID of port that this function is associated with. - * 0xFF... (All Fs) if this function is not associated with - * any port. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - uint16_t port_id; + #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_SFT \ + 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* Port PHY configuration change */ + #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_ID_PORT_PHY_CFG_CHANGE \ + UINT32_C(0x7) + #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_ID_PORT_PHY_CFG_CHANGE + /* Event specific data */ + uint32_t event_data2; + uint8_t opaque_v; /* - * This value is the current VLAN setting for this - * function. The value of 0 for this field indicates - * no priority tagging or VLAN is used. - * This field's format is same as 802.1Q Tag's - * Tag Control Information (TCI) format that includes both - * Priority Code Point (PCP) and VLAN Identifier (VID). + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - uint16_t vlan; - uint16_t flags; + #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_V \ + UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_OPAQUE_MASK \ + UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; + /* PORT ID */ + #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_PORT_ID_MASK \ + UINT32_C(0xffff) + #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_PORT_ID_SFT \ + 0 /* - * If 1, then magic packet based Out-Of-Box WoL is enabled on - * the port associated with this function. + * If set to 1, it indicates that the FEC + * configuration on the port has changed. + * If set to 0, then there is no change in FEC configuration. */ - #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_OOB_WOL_MAGICPKT_ENABLED \ - UINT32_C(0x1) + #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_FEC_CFG_CHANGE \ + UINT32_C(0x10000) /* - * If 1, then bitmap pattern based Out-Of-Box WoL packet is enabled - * on the port associated with this function. + * If set to 1, it indicates that the EEE configuration + * on the port has changed. + * If set to 0, then there is no change in EEE configuration + * on the port. */ - #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_OOB_WOL_BMP_ENABLED \ - UINT32_C(0x2) + #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_EEE_CFG_CHANGE \ + UINT32_C(0x20000) /* - * If set to 1, then FW based DCBX agent is enabled and running on - * the port associated with this function. - * If set to 0, then DCBX agent is not running in the firmware. + * If set to 1, it indicates that the pause configuration + * on the PHY has changed. + * If set to 0, then there is no change in the pause + * configuration on the PHY. */ - #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_FW_DCBX_AGENT_ENABLED \ - UINT32_C(0x4) + #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_PAUSE_CFG_CHANGE \ + UINT32_C(0x40000) +} __rte_packed; + +/* hwrm_async_event_cmpl_reset_notify (size:128b/16B) */ +struct hwrm_async_event_cmpl_reset_notify { + uint16_t type; /* - * Standard TX Ring mode is used for the allocation of TX ring - * and underlying scheduling resources that allow bandwidth - * reservation and limit settings on the queried function. - * If set to 1, then standard TX ring mode is enabled - * on the queried function. - * If set to 0, then the standard TX ring mode is disabled - * on the queried function. In this extended TX ring resource - * mode, the minimum and maximum bandwidth settings are not - * supported to allow the allocation of TX rings to span multiple - * scheduler nodes. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_STD_TX_RING_MODE_ENABLED \ + #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_TYPE_SFT 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* Notify clients of imminent reset. */ + #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_ID_RESET_NOTIFY \ UINT32_C(0x8) + #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_ID_RESET_NOTIFY + /* Event specific data */ + uint32_t event_data2; + uint8_t opaque_v; /* - * If set to 1 then FW based LLDP agent is enabled and running on - * the port associated with this function. - * If set to 0 then the LLDP agent is not running in the firmware. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_FW_LLDP_AGENT_ENABLED \ - UINT32_C(0x10) + #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_V UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_OPAQUE_MASK UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_OPAQUE_SFT 1 /* - * If set to 1, then multi-host mode is active for this function. - * If set to 0, then multi-host mode is inactive for this function - * or not applicable for this device. + * 8-lsb timestamp (100-msec resolution) + * The Minimum time required for the Firmware readiness after sending this + * notification to the driver instances. */ - #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_MULTI_HOST \ - UINT32_C(0x20) + uint8_t timestamp_lo; /* - * If the function that is being queried is a PF, then the HWRM shall - * set this field to 0 and the HWRM client shall ignore this field. - * If the function that is being queried is a VF, then the HWRM shall - * set this field to 1 if the queried VF is trusted, otherwise the HWRM - * shall set this field to 0. + * 16-lsb timestamp (100-msec resolution) + * The Maximum Firmware Reset bail out value in the order of 100 + * milli seconds. The driver instances will use this value to re-initiate the + * registration process again if the core firmware didn’t set the ready + * state bit. */ - #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_TRUSTED_VF \ - UINT32_C(0x40) + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; + /* Indicates driver action requested */ + #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_DRIVER_ACTION_MASK \ + UINT32_C(0xff) + #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_DRIVER_ACTION_SFT \ + 0 /* - * This value is current MAC address configured for this - * function. A value of 00-00-00-00-00-00 indicates no - * MAC address is currently configured. + * If set to 1, it indicates that the l2 client should + * stop sending in band traffic to Nitro. + * if set to 0, there is no change in L2 client behavior. */ - uint8_t mac_address[6]; + #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_DRIVER_ACTION_DRIVER_STOP_TX_QUEUE \ + UINT32_C(0x1) /* - * This value is current PCI ID of this - * function. If ARI is enabled, then it is - * Bus Number (8b):Function Number(8b). Otherwise, it is - * Bus Number (8b):Device Number (4b):Function Number(4b). - * If multi-host mode is active, the 4 lsb will indicate - * the PF index for this function. + * If set to 1, it indicates that the L2 client should + * bring down the interface. + * If set to 0, then there is no change in L2 client behavior. */ - uint16_t pci_id; + #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_DRIVER_ACTION_DRIVER_IFDOWN \ + UINT32_C(0x2) + #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_DRIVER_ACTION_LAST \ + HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_DRIVER_ACTION_DRIVER_IFDOWN + /* Indicates reason for reset. */ + #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_REASON_CODE_MASK \ + UINT32_C(0xff00) + #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_REASON_CODE_SFT \ + 8 + /* A management client has requested reset. */ + #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_REASON_CODE_MANAGEMENT_RESET_REQUEST \ + (UINT32_C(0x1) << 8) + /* A fatal firmware exception has occurred. */ + #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_REASON_CODE_FW_EXCEPTION_FATAL \ + (UINT32_C(0x2) << 8) + /* A non-fatal firmware exception has occurred. */ + #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_REASON_CODE_FW_EXCEPTION_NON_FATAL \ + (UINT32_C(0x3) << 8) + #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_REASON_CODE_LAST \ + HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_REASON_CODE_FW_EXCEPTION_NON_FATAL /* - * The number of RSS/COS contexts currently - * allocated to the function. + * Minimum time before driver should attempt access - units 100ms ticks. + * Range 0-65535 */ - uint16_t alloc_rsscos_ctx; + #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_DELAY_IN_100MS_TICKS_MASK \ + UINT32_C(0xffff0000) + #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_DELAY_IN_100MS_TICKS_SFT \ + 16 +} __rte_packed; + +/* hwrm_async_event_cmpl_error_recovery (size:128b/16B) */ +struct hwrm_async_event_cmpl_error_recovery { + uint16_t type; /* - * The number of completion rings currently allocated to - * the function. This does not include the rings allocated - * to any children functions if any. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - uint16_t alloc_cmpl_rings; + #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_TYPE_SFT 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; /* - * The number of transmit rings currently allocated to - * the function. This does not include the rings allocated - * to any children functions if any. + * This async notification message can be used for selecting or + * deselecting master function for error recovery, + * and to communicate to all the functions whether error recovery + * was enabled/disabled. */ - uint16_t alloc_tx_rings; + #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_EVENT_ID_ERROR_RECOVERY \ + UINT32_C(0x9) + #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_EVENT_ID_ERROR_RECOVERY + /* Event specific data */ + uint32_t event_data2; + uint8_t opaque_v; /* - * The number of receive rings currently allocated to - * the function. This does not include the rings allocated - * to any children functions if any. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - uint16_t alloc_rx_rings; - /* The allocated number of L2 contexts to the function. */ - uint16_t alloc_l2_ctx; - /* The allocated number of vnics to the function. */ - uint16_t alloc_vnics; + #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_V UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_OPAQUE_MASK UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_OPAQUE_SFT 1 + /* 8-lsb timestamp (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; + /* Indicates driver action requested */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_EVENT_DATA1_FLAGS_MASK \ + UINT32_C(0xff) + #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_EVENT_DATA1_FLAGS_SFT \ + 0 /* - * The maximum transmission unit of the function. - * For rings allocated on this function, this default - * value is used if ring MTU is not specified. + * If set to 1, this function is selected as Master function. + * This function has responsibility to do 'chip reset' when it + * detects a fatal error. If set to 0, master function functionality + * is disabled on this function. */ - uint16_t mtu; + #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_EVENT_DATA1_FLAGS_MASTER_FUNC \ + UINT32_C(0x1) /* - * The maximum receive unit of the function. - * For vnics allocated on this function, this default - * value is used if vnic MRU is not specified. + * If set to 1, error recovery is enabled. + * If set to 0, error recovery is disabled. */ - uint16_t mru; - /* The statistics context assigned to a function. */ - uint16_t stat_ctx_id; + #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_EVENT_DATA1_FLAGS_RECOVERY_ENABLED \ + UINT32_C(0x2) +} __rte_packed; + +/* hwrm_async_event_cmpl_func_drvr_unload (size:128b/16B) */ +struct hwrm_async_event_cmpl_func_drvr_unload { + uint16_t type; /* - * The HWRM shall return Unknown value for this field - * when this command is used to query VF's configuration. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - uint8_t port_partition_type; - /* Single physical function */ - #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_SPF UINT32_C(0x0) - /* Multiple physical functions */ - #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_MPFS UINT32_C(0x1) - /* Network Partitioning 1.0 */ - #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_0 UINT32_C(0x2) - /* Network Partitioning 1.5 */ - #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_5 UINT32_C(0x3) - /* Network Partitioning 2.0 */ - #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR2_0 UINT32_C(0x4) - /* Unknown */ - #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_UNKNOWN \ - UINT32_C(0xff) - #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_LAST \ - HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_UNKNOWN + #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_SFT 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* Function driver unloaded */ + #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_ID_FUNC_DRVR_UNLOAD \ + UINT32_C(0x10) + #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_ID_FUNC_DRVR_UNLOAD + /* Event specific data */ + uint32_t event_data2; + uint8_t opaque_v; /* - * This field will indicate number of physical functions on this port_partition. - * HWRM shall return unavail (i.e. value of 0) for this field - * when this command is used to query VF's configuration or - * from older firmware that doesn't support this field. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - uint8_t port_pf_cnt; - /* number of PFs is not available */ - #define HWRM_FUNC_QCFG_OUTPUT_PORT_PF_CNT_UNAVAIL UINT32_C(0x0) - #define HWRM_FUNC_QCFG_OUTPUT_PORT_PF_CNT_LAST \ - HWRM_FUNC_QCFG_OUTPUT_PORT_PF_CNT_UNAVAIL + #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_V UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_OPAQUE_MASK \ + UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; + /* Function ID */ + #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_DATA1_FUNC_ID_MASK \ + UINT32_C(0xffff) + #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_DATA1_FUNC_ID_SFT \ + 0 +} __rte_packed; + +/* hwrm_async_event_cmpl_func_drvr_load (size:128b/16B) */ +struct hwrm_async_event_cmpl_func_drvr_load { + uint16_t type; /* - * The default VNIC ID assigned to a function that is - * being queried. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - uint16_t dflt_vnic_id; - uint16_t max_mtu_configured; + #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_SFT 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* Function driver loaded */ + #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_ID_FUNC_DRVR_LOAD \ + UINT32_C(0x11) + #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_ID_FUNC_DRVR_LOAD + /* Event specific data */ + uint32_t event_data2; + uint8_t opaque_v; /* - * Minimum BW allocated for this function. - * The HWRM will translate this value into byte counter and - * time interval used for the scheduler inside the device. - * A value of 0 indicates the minimum bandwidth is not - * configured. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - uint32_t min_bw; - /* The bandwidth value. */ - #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_SFT 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE_LAST \ - HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_SFT 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_LAST \ - HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_INVALID - /* - * Maximum BW allocated for this function. - * The HWRM will translate this value into byte counter and - * time interval used for the scheduler inside the device. - * A value of 0 indicates that the maximum bandwidth is not - * configured. - */ - uint32_t max_bw; - /* The bandwidth value. */ - #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_SFT 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE_LAST \ - HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_SFT 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_LAST \ - HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_INVALID + #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_V UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_OPAQUE_MASK UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; + /* Function ID */ + #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_DATA1_FUNC_ID_MASK \ + UINT32_C(0xffff) + #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_DATA1_FUNC_ID_SFT 0 +} __rte_packed; + +/* hwrm_async_event_cmpl_func_flr_proc_cmplt (size:128b/16B) */ +struct hwrm_async_event_cmpl_func_flr_proc_cmplt { + uint16_t type; /* - * This value indicates the Edge virtual bridge mode for the - * domain that this function belongs to. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - uint8_t evb_mode; - /* No Edge Virtual Bridging (EVB) */ - #define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_NO_EVB UINT32_C(0x0) - /* Virtual Ethernet Bridge (VEB) */ - #define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_VEB UINT32_C(0x1) - /* Virtual Ethernet Port Aggregator (VEPA) */ - #define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_VEPA UINT32_C(0x2) - #define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_LAST \ - HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_VEPA - uint8_t options; + #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_SFT \ + 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* Function FLR related processing has completed */ + #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_ID_FUNC_FLR_PROC_CMPLT \ + UINT32_C(0x12) + #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_ID_FUNC_FLR_PROC_CMPLT + /* Event specific data */ + uint32_t event_data2; + uint8_t opaque_v; /* - * This value indicates the PCIE device cache line size. - * The cache line size allows the DMA writes to terminate and - * start at the cache boundary. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_CACHE_LINESIZE_MASK \ - UINT32_C(0x3) - #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_CACHE_LINESIZE_SFT 0 - /* Cache Line Size 64 bytes */ - #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_CACHE_LINESIZE_SIZE_64 \ - UINT32_C(0x0) - /* Cache Line Size 128 bytes */ - #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_CACHE_LINESIZE_SIZE_128 \ + #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_V \ UINT32_C(0x1) - #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_CACHE_LINESIZE_LAST \ - HWRM_FUNC_QCFG_OUTPUT_OPTIONS_CACHE_LINESIZE_SIZE_128 - /* This value is the virtual link admin state setting. */ - #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_LINK_ADMIN_STATE_MASK \ - UINT32_C(0xc) - #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_LINK_ADMIN_STATE_SFT 2 - /* Admin link state is in forced down mode. */ - #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_LINK_ADMIN_STATE_FORCED_DOWN \ - (UINT32_C(0x0) << 2) - /* Admin link state is in forced up mode. */ - #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_LINK_ADMIN_STATE_FORCED_UP \ - (UINT32_C(0x1) << 2) - /* Admin link state is in auto mode - follows the physical link state. */ - #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_LINK_ADMIN_STATE_AUTO \ - (UINT32_C(0x2) << 2) - #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_LINK_ADMIN_STATE_LAST \ - HWRM_FUNC_QCFG_OUTPUT_OPTIONS_LINK_ADMIN_STATE_AUTO - /* Reserved for future. */ - #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_RSVD_MASK \ - UINT32_C(0xf0) - #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_RSVD_SFT 4 + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_OPAQUE_MASK \ + UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; + /* Function ID */ + #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_DATA1_FUNC_ID_MASK \ + UINT32_C(0xffff) + #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_DATA1_FUNC_ID_SFT \ + 0 +} __rte_packed; + +/* hwrm_async_event_cmpl_pf_drvr_unload (size:128b/16B) */ +struct hwrm_async_event_cmpl_pf_drvr_unload { + uint16_t type; /* - * The number of VFs that are allocated to the function. - * This is valid only on the PF with SR-IOV enabled. - * 0xFF... (All Fs) if this command is called on a PF with - * SR-IOV disabled or on a VF. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - uint16_t alloc_vfs; + #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_SFT 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* PF driver unloaded */ + #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_ID_PF_DRVR_UNLOAD \ + UINT32_C(0x20) + #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_ID_PF_DRVR_UNLOAD + /* Event specific data */ + uint32_t event_data2; + uint8_t opaque_v; /* - * The number of allocated multicast filters for this - * function on the RX side. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - uint32_t alloc_mcast_filters; + #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_V UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_OPAQUE_MASK UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; + /* PF ID */ + #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_FUNC_ID_MASK \ + UINT32_C(0xffff) + #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_FUNC_ID_SFT 0 + /* Indicates the physical port this pf belongs to */ + #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_PORT_MASK \ + UINT32_C(0x70000) + #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_PORT_SFT 16 +} __rte_packed; + +/* hwrm_async_event_cmpl_pf_drvr_load (size:128b/16B) */ +struct hwrm_async_event_cmpl_pf_drvr_load { + uint16_t type; /* - * The number of allocated HW ring groups for this - * function. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - uint32_t alloc_hw_ring_grps; + #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_SFT 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* PF driver loaded */ + #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_ID_PF_DRVR_LOAD \ + UINT32_C(0x21) + #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_ID_PF_DRVR_LOAD + /* Event specific data */ + uint32_t event_data2; + uint8_t opaque_v; /* - * The number of strict priority transmit rings out of - * currently allocated TX rings to the function - * (alloc_tx_rings). + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - uint16_t alloc_sp_tx_rings; + #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_V UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_OPAQUE_MASK UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; + /* PF ID */ + #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_DATA1_FUNC_ID_MASK \ + UINT32_C(0xffff) + #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_DATA1_FUNC_ID_SFT 0 + /* Indicates the physical port this pf belongs to */ + #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_DATA1_PORT_MASK \ + UINT32_C(0x70000) + #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_DATA1_PORT_SFT 16 +} __rte_packed; + +/* hwrm_async_event_cmpl_vf_flr (size:128b/16B) */ +struct hwrm_async_event_cmpl_vf_flr { + uint16_t type; /* - * The number of statistics contexts - * currently reserved for the function. - */ - uint16_t alloc_stat_ctx; - /* - * This field specifies how many NQs are reserved for the PF. - * Remaining NQs that belong to the PF are available for VFs. - * Once a PF has created VFs, it cannot change how many NQs are - * reserved for itself (since the NQs must be contiguous in HW). + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - uint16_t alloc_msix; - uint8_t unused_2[5]; + #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_SFT 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* VF Function Level Reset (FLR) */ + #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_ID_VF_FLR UINT32_C(0x30) + #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_ID_VF_FLR + /* Event specific data */ + uint32_t event_data2; + uint8_t opaque_v; /* - * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' - * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - uint8_t valid; -} __attribute__((packed)); - -/***************** - * hwrm_func_cfg * - *****************/ + #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_V UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_OPAQUE_MASK UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; + /* VF ID */ + #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_DATA1_VF_ID_MASK \ + UINT32_C(0xffff) + #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_DATA1_VF_ID_SFT 0 + /* Indicates the physical function this event occurred on. */ + #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_DATA1_PF_ID_MASK \ + UINT32_C(0xff0000) + #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_DATA1_PF_ID_SFT 16 +} __rte_packed; +/* hwrm_async_event_cmpl_vf_mac_addr_change (size:128b/16B) */ +struct hwrm_async_event_cmpl_vf_mac_addr_change { + uint16_t type; + /* + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. + */ + #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_SFT 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* VF MAC Address Change */ + #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_ID_VF_MAC_ADDR_CHANGE \ + UINT32_C(0x31) + #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_ID_VF_MAC_ADDR_CHANGE + /* Event specific data */ + uint32_t event_data2; + uint8_t opaque_v; + /* + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. + */ + #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_V \ + UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_OPAQUE_MASK \ + UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; + /* VF ID */ + #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_DATA1_VF_ID_MASK \ + UINT32_C(0xffff) + #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_DATA1_VF_ID_SFT \ + 0 +} __rte_packed; -/* hwrm_func_cfg_input (size:704b/88B) */ -struct hwrm_func_cfg_input { - /* The HWRM command request type. */ - uint16_t req_type; +/* hwrm_async_event_cmpl_pf_vf_comm_status_change (size:128b/16B) */ +struct hwrm_async_event_cmpl_pf_vf_comm_status_change { + uint16_t type; /* - * The completion ring to send the completion event on. This should - * be the NQ ID returned from the `nq_alloc` HWRM command. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - uint16_t cmpl_ring; + #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_SFT \ + 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* PF-VF communication channel status change. */ + #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_EVENT_ID_PF_VF_COMM_STATUS_CHANGE \ + UINT32_C(0x32) + #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_EVENT_ID_PF_VF_COMM_STATUS_CHANGE + /* Event specific data */ + uint32_t event_data2; + uint8_t opaque_v; /* - * The sequence ID is used by the driver for tracking multiple - * commands. This ID is treated as opaque data by the firmware and - * the value is returned in the `hwrm_resp_hdr` upon completion. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - uint16_t seq_id; + #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_V \ + UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_OPAQUE_MASK \ + UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; /* - * The target ID of the command: - * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors - * * 0xFFFF - HWRM + * If this bit is set to 1, then it indicates that the PF-VF + * communication was lost and it is established. + * If this bit set to 0, then it indicates that the PF-VF + * communication was established and it is lost. */ - uint16_t target_id; + #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_EVENT_DATA1_COMM_ESTABLISHED \ + UINT32_C(0x1) +} __rte_packed; + +/* hwrm_async_event_cmpl_vf_cfg_change (size:128b/16B) */ +struct hwrm_async_event_cmpl_vf_cfg_change { + uint16_t type; /* - * A physical address pointer pointing to a host buffer that the - * command's response data will be written. This can be either a host - * physical address (HPA) or a guest physical address (GPA) and must - * point to a physically contiguous block of memory. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - uint64_t resp_addr; + #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_SFT 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* VF Configuration Change */ + #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_ID_VF_CFG_CHANGE \ + UINT32_C(0x33) + #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_ID_VF_CFG_CHANGE + /* Event specific data */ + uint32_t event_data2; + uint8_t opaque_v; /* - * Function ID of the function that is being - * configured. - * If set to 0xFF... (All Fs), then the the configuration is - * for the requesting function. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - uint16_t fid; + #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_V UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_OPAQUE_MASK UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; /* - * This field specifies how many NQs will be reserved for the PF. - * Remaining NQs that belong to the PF become available for VFs. - * Once a PF has created VFs, it cannot change how many NQs are - * reserved for itself (since the NQs must be contiguous in HW). + * Each flag provided in this field indicates a specific VF + * configuration change. At least one of these flags shall be set to 1 + * when an asynchronous event completion of this type is provided + * by the HWRM. */ - uint16_t num_msix; - uint32_t flags; + uint32_t event_data1; /* - * When this bit is '1', the function is disabled with - * source MAC address check. - * This is an anti-spoofing check. If this flag is set, - * then the function shall be configured to disallow - * transmission of frames with the source MAC address that - * is configured for this function. + * If this bit is set to 1, then the value of MTU + * was changed on this VF. + * If set to 0, then this bit should be ignored. */ - #define HWRM_FUNC_CFG_INPUT_FLAGS_SRC_MAC_ADDR_CHECK_DISABLE \ + #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_MTU_CHANGE \ UINT32_C(0x1) /* - * When this bit is '1', the function is enabled with - * source MAC address check. - * This is an anti-spoofing check. If this flag is set, - * then the function shall be configured to allow - * transmission of frames with the source MAC address that - * is configured for this function. + * If this bit is set to 1, then the value of MRU + * was changed on this VF. + * If set to 0, then this bit should be ignored. */ - #define HWRM_FUNC_CFG_INPUT_FLAGS_SRC_MAC_ADDR_CHECK_ENABLE \ + #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_MRU_CHANGE \ UINT32_C(0x2) - /* reserved. */ - #define HWRM_FUNC_CFG_INPUT_FLAGS_RSVD_MASK \ - UINT32_C(0x1fc) - #define HWRM_FUNC_CFG_INPUT_FLAGS_RSVD_SFT 2 /* - * Standard TX Ring mode is used for the allocation of TX ring - * and underlying scheduling resources that allow bandwidth - * reservation and limit settings on the queried function. - * If set to 1, then standard TX ring mode is requested to be - * enabled on the function being configured. + * If this bit is set to 1, then the value of default MAC + * address was changed on this VF. + * If set to 0, then this bit should be ignored. */ - #define HWRM_FUNC_CFG_INPUT_FLAGS_STD_TX_RING_MODE_ENABLE \ - UINT32_C(0x200) + #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_DFLT_MAC_ADDR_CHANGE \ + UINT32_C(0x4) /* - * Standard TX Ring mode is used for the allocation of TX ring - * and underlying scheduling resources that allow bandwidth - * reservation and limit settings on the queried function. - * If set to 1, then the standard TX ring mode is requested to - * be disabled on the function being configured. In this extended - * TX ring resource mode, the minimum and maximum bandwidth settings - * are not supported to allow the allocation of TX rings to - * span multiple scheduler nodes. + * If this bit is set to 1, then the value of default VLAN + * was changed on this VF. + * If set to 0, then this bit should be ignored. */ - #define HWRM_FUNC_CFG_INPUT_FLAGS_STD_TX_RING_MODE_DISABLE \ - UINT32_C(0x400) + #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_DFLT_VLAN_CHANGE \ + UINT32_C(0x8) /* - * If this bit is set, virtual mac address configured - * in this command will be persistent over warm boot. + * If this bit is set to 1, then the value of trusted VF enable + * was changed on this VF. + * If set to 0, then this bit should be ignored. */ - #define HWRM_FUNC_CFG_INPUT_FLAGS_VIRT_MAC_PERSIST \ - UINT32_C(0x800) + #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_TRUSTED_VF_CFG_CHANGE \ + UINT32_C(0x10) +} __rte_packed; + +/* hwrm_async_event_cmpl_llfc_pfc_change (size:128b/16B) */ +struct hwrm_async_event_cmpl_llfc_pfc_change { + uint16_t type; /* - * This bit only applies to the VF. If this bit is set, the statistic - * context counters will not be cleared when the statistic context is freed - * or a function reset is called on VF. This bit will be cleared when the PF - * is unloaded or a function reset is called on the PF. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - #define HWRM_FUNC_CFG_INPUT_FLAGS_NO_AUTOCLEAR_STATISTIC \ - UINT32_C(0x1000) + #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_TYPE_SFT 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_TYPE_HWRM_ASYNC_EVENT + /* unused1 is 10 b */ + #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_UNUSED1_MASK \ + UINT32_C(0xffc0) + #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_UNUSED1_SFT 6 + /* Identifiers of events. */ + uint16_t event_id; + /* LLFC/PFC Configuration Change */ + #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_ID_LLFC_PFC_CHANGE \ + UINT32_C(0x34) + #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_ID_LLFC_PFC_CHANGE + /* Event specific data */ + uint32_t event_data2; + uint8_t opaque_v; /* - * This bit requests that the firmware test to see if all the assets - * requested in this command (i.e. number of TX rings) are available. - * The firmware will return an error if the requested assets are - * not available. The firwmare will NOT reserve the assets if they - * are available. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - #define HWRM_FUNC_CFG_INPUT_FLAGS_TX_ASSETS_TEST \ - UINT32_C(0x2000) + #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_V UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_OPAQUE_MASK \ + UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; + /* Indicates llfc pfc status change */ + #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_MASK \ + UINT32_C(0x3) + #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_SFT \ + 0 /* - * This bit requests that the firmware test to see if all the assets - * requested in this command (i.e. number of RX rings) are available. - * The firmware will return an error if the requested assets are - * not available. The firwmare will NOT reserve the assets if they - * are available. + * If this field set to 1, then it indicates that llfc is + * enabled. */ - #define HWRM_FUNC_CFG_INPUT_FLAGS_RX_ASSETS_TEST \ - UINT32_C(0x4000) + #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_LLFC \ + UINT32_C(0x1) /* - * This bit requests that the firmware test to see if all the assets - * requested in this command (i.e. number of CMPL rings) are available. - * The firmware will return an error if the requested assets are - * not available. The firwmare will NOT reserve the assets if they - * are available. + * If this field is set to 2, then it indicates that pfc + * is enabled. */ - #define HWRM_FUNC_CFG_INPUT_FLAGS_CMPL_ASSETS_TEST \ - UINT32_C(0x8000) + #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_PFC \ + UINT32_C(0x2) + #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_LAST \ + HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_PFC + /* Indicates the physical port this llfc pfc change occur */ + #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_PORT_MASK \ + UINT32_C(0x1c) + #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_PORT_SFT \ + 2 + /* PORT ID */ + #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_PORT_ID_MASK \ + UINT32_C(0x1fffe0) + #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_PORT_ID_SFT \ + 5 +} __rte_packed; + +/* hwrm_async_event_cmpl_default_vnic_change (size:128b/16B) */ +struct hwrm_async_event_cmpl_default_vnic_change { + uint16_t type; /* - * This bit requests that the firmware test to see if all the assets - * requested in this command (i.e. number of RSS ctx) are available. - * The firmware will return an error if the requested assets are - * not available. The firwmare will NOT reserve the assets if they - * are available. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - #define HWRM_FUNC_CFG_INPUT_FLAGS_RSSCOS_CTX_ASSETS_TEST \ - UINT32_C(0x10000) + #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_TYPE_SFT \ + 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_TYPE_HWRM_ASYNC_EVENT + /* unused1 is 10 b */ + #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_UNUSED1_MASK \ + UINT32_C(0xffc0) + #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_UNUSED1_SFT \ + 6 + /* Identifiers of events. */ + uint16_t event_id; + /* Notification of a default vnic allocation or free */ + #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_ID_ALLOC_FREE_NOTIFICATION \ + UINT32_C(0x35) + #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_ID_ALLOC_FREE_NOTIFICATION + /* Event specific data */ + uint32_t event_data2; + uint8_t opaque_v; /* - * This bit requests that the firmware test to see if all the assets - * requested in this command (i.e. number of ring groups) are available. - * The firmware will return an error if the requested assets are - * not available. The firwmare will NOT reserve the assets if they - * are available. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - #define HWRM_FUNC_CFG_INPUT_FLAGS_RING_GRP_ASSETS_TEST \ - UINT32_C(0x20000) + #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_V \ + UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_OPAQUE_MASK \ + UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; + /* Indicates default vnic configuration change */ + #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_MASK \ + UINT32_C(0x3) + #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_SFT \ + 0 /* - * This bit requests that the firmware test to see if all the assets - * requested in this command (i.e. number of stat ctx) are available. - * The firmware will return an error if the requested assets are - * not available. The firwmare will NOT reserve the assets if they - * are available. + * If this field is set to 1, then it indicates that + * a default VNIC has been allocate. */ - #define HWRM_FUNC_CFG_INPUT_FLAGS_STAT_CTX_ASSETS_TEST \ - UINT32_C(0x40000) + #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_DEF_VNIC_ALLOC \ + UINT32_C(0x1) /* - * This bit requests that the firmware test to see if all the assets - * requested in this command (i.e. number of VNICs) are available. - * The firmware will return an error if the requested assets are - * not available. The firwmare will NOT reserve the assets if they - * are available. + * If this field is set to 2, then it indicates that + * a default VNIC has been freed. */ - #define HWRM_FUNC_CFG_INPUT_FLAGS_VNIC_ASSETS_TEST \ - UINT32_C(0x80000) + #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_DEF_VNIC_FREE \ + UINT32_C(0x2) + #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_LAST \ + HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_DEF_VNIC_FREE + /* Indicates the physical function this event occurred on. */ + #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_PF_ID_MASK \ + UINT32_C(0x3fc) + #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_PF_ID_SFT \ + 2 + /* Indicates the virtual function this event occurred on */ + #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_VF_ID_MASK \ + UINT32_C(0x3fffc00) + #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_VF_ID_SFT \ + 10 +} __rte_packed; + +/* hwrm_async_event_cmpl_hw_flow_aged (size:128b/16B) */ +struct hwrm_async_event_cmpl_hw_flow_aged { + uint16_t type; /* - * This bit requests that the firmware test to see if all the assets - * requested in this command (i.e. number of L2 ctx) are available. - * The firmware will return an error if the requested assets are - * not available. The firwmare will NOT reserve the assets if they - * are available. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - #define HWRM_FUNC_CFG_INPUT_FLAGS_L2_CTX_ASSETS_TEST \ - UINT32_C(0x100000) + #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_TYPE_SFT 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* Notification of a hw flow aged */ + #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_EVENT_ID_HW_FLOW_AGED \ + UINT32_C(0x36) + #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_EVENT_ID_HW_FLOW_AGED + /* Event specific data */ + uint32_t event_data2; + uint8_t opaque_v; /* - * This configuration change can be initiated by a PF driver. This - * configuration request shall be targeted to a VF. From local host - * resident HWRM clients, only the parent PF driver shall be allowed - * to initiate this change on one of its children VFs. If this bit is - * set to 1, then the VF that is being configured is requested to be - * trusted. If this bit is set to 0, then the VF that is being configured - * is requested to be not trusted. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - #define HWRM_FUNC_CFG_INPUT_FLAGS_TRUSTED_VF_ENABLE \ - UINT32_C(0x200000) - uint32_t enables; + #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_V UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_OPAQUE_MASK UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; + /* Indicates flow ID this event occurred on. */ + #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_EVENT_DATA1_FLOW_ID_MASK \ + UINT32_C(0x7fffffff) + #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_EVENT_DATA1_FLOW_ID_SFT \ + 0 + /* Indicates flow direction this event occurred on. */ + #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_EVENT_DATA1_FLOW_DIRECTION \ + UINT32_C(0x80000000) /* - * This bit must be '1' for the mtu field to be - * configured. + * If this bit set to 0, then it indicates that the aged + * event was rx flow. */ - #define HWRM_FUNC_CFG_INPUT_ENABLES_MTU \ - UINT32_C(0x1) + #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_EVENT_DATA1_FLOW_DIRECTION_RX \ + (UINT32_C(0x0) << 31) /* - * This bit must be '1' for the mru field to be - * configured. + * If this bit is set to 1, then it indicates that the aged + * event was tx flow. */ - #define HWRM_FUNC_CFG_INPUT_ENABLES_MRU \ - UINT32_C(0x2) + #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_EVENT_DATA1_FLOW_DIRECTION_TX \ + (UINT32_C(0x1) << 31) + #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_EVENT_DATA1_FLOW_DIRECTION_LAST \ + HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_EVENT_DATA1_FLOW_DIRECTION_TX +} __rte_packed; + +/* hwrm_async_event_cmpl_eem_cache_flush_req (size:128b/16B) */ +struct hwrm_async_event_cmpl_eem_cache_flush_req { + uint16_t type; /* - * This bit must be '1' for the num_rsscos_ctxs field to be - * configured. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_RSSCOS_CTXS \ - UINT32_C(0x4) + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_TYPE_SFT \ + 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* Notification of a eem_cache_flush request */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_EVENT_ID_EEM_CACHE_FLUSH_REQ \ + UINT32_C(0x38) + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_EVENT_ID_EEM_CACHE_FLUSH_REQ + /* Event specific data */ + uint32_t event_data2; + uint8_t opaque_v; /* - * This bit must be '1' for the num_cmpl_rings field to be - * configured. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_CMPL_RINGS \ - UINT32_C(0x8) + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_V \ + UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_OPAQUE_MASK \ + UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; +} __rte_packed; + +/* hwrm_async_event_cmpl_eem_cache_flush_done (size:128b/16B) */ +struct hwrm_async_event_cmpl_eem_cache_flush_done { + uint16_t type; /* - * This bit must be '1' for the num_tx_rings field to be - * configured. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_TX_RINGS \ - UINT32_C(0x10) + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_TYPE_SFT \ + 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; /* - * This bit must be '1' for the num_rx_rings field to be - * configured. + * Notification of a host eem_cache_flush has completed. This event + * is generated by the host driver. */ - #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_RX_RINGS \ - UINT32_C(0x20) + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_EVENT_ID_EEM_CACHE_FLUSH_DONE \ + UINT32_C(0x39) + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_EVENT_ID_EEM_CACHE_FLUSH_DONE + /* Event specific data */ + uint32_t event_data2; + uint8_t opaque_v; /* - * This bit must be '1' for the num_l2_ctxs field to be - * configured. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_L2_CTXS \ - UINT32_C(0x40) + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_V \ + UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_OPAQUE_MASK \ + UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; + /* Indicates function ID that this event occurred on. */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_EVENT_DATA1_FID_MASK \ + UINT32_C(0xffff) + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_EVENT_DATA1_FID_SFT \ + 0 +} __rte_packed; + +/* hwrm_async_event_cmpl_tcp_flag_action_change (size:128b/16B) */ +struct hwrm_async_event_cmpl_tcp_flag_action_change { + uint16_t type; /* - * This bit must be '1' for the num_vnics field to be - * configured. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_VNICS \ - UINT32_C(0x80) + #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_TYPE_SFT \ + 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* Notification of tcp flag action change */ + #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_EVENT_ID_TCP_FLAG_ACTION_CHANGE \ + UINT32_C(0x3a) + #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_EVENT_ID_TCP_FLAG_ACTION_CHANGE + /* Event specific data */ + uint32_t event_data2; + uint8_t opaque_v; /* - * This bit must be '1' for the num_stat_ctxs field to be - * configured. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_STAT_CTXS \ - UINT32_C(0x100) + #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_V \ + UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_OPAQUE_MASK \ + UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; +} __rte_packed; + +/* hwrm_async_event_cmpl_eem_flow_active (size:128b/16B) */ +struct hwrm_async_event_cmpl_eem_flow_active { + uint16_t type; /* - * This bit must be '1' for the dflt_mac_addr field to be - * configured. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - #define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_MAC_ADDR \ - UINT32_C(0x200) + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_TYPE_SFT 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* Notification of an active eem flow */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_ID_EEM_FLOW_ACTIVE \ + UINT32_C(0x3b) + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_ID_EEM_FLOW_ACTIVE + /* Event specific data */ + uint32_t event_data2; + /* Indicates the 2nd global id this event occurred on. */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA2_GLOBAL_ID_2_MASK \ + UINT32_C(0x3fffffff) + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA2_GLOBAL_ID_2_SFT \ + 0 /* - * This bit must be '1' for the dflt_vlan field to be - * configured. + * Indicates flow direction of the flow identified by + * the global_id_2. + */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA2_FLOW_DIRECTION \ + UINT32_C(0x40000000) + /* If this bit is set to 0, then it indicates that this rx flow. */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA2_FLOW_DIRECTION_RX \ + (UINT32_C(0x0) << 30) + /* If this bit is set to 1, then it indicates that this tx flow. */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA2_FLOW_DIRECTION_TX \ + (UINT32_C(0x1) << 30) + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA2_FLOW_DIRECTION_LAST \ + HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA2_FLOW_DIRECTION_TX + uint8_t opaque_v; + /* + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - #define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_VLAN \ - UINT32_C(0x400) + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_V UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_OPAQUE_MASK \ + UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; + /* Indicates the 1st global id this event occurred on. */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_GLOBAL_ID_1_MASK \ + UINT32_C(0x3fffffff) + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_GLOBAL_ID_1_SFT \ + 0 /* - * This bit must be '1' for the dflt_ip_addr field to be - * configured. + * Indicates flow direction of the flow identified by the + * global_id_1. + */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_FLOW_DIRECTION \ + UINT32_C(0x40000000) + /* If this bit is set to 0, then it indicates that this is rx flow. */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_FLOW_DIRECTION_RX \ + (UINT32_C(0x0) << 30) + /* If this bit is set to 1, then it indicates that this is tx flow. */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_FLOW_DIRECTION_TX \ + (UINT32_C(0x1) << 30) + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_FLOW_DIRECTION_LAST \ + HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_FLOW_DIRECTION_TX + /* + * Indicates EEM flow aging mode this event occurred on. If + * this bit is set to 0, the event_data1 is the EEM global + * ID. If this bit is set to 1, the event_data1 is the number + * of global ID in the context memory. + */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_MODE \ + UINT32_C(0x80000000) + /* EEM flow aging mode 0. */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_MODE_0 \ + (UINT32_C(0x0) << 31) + /* EEM flow aging mode 1. */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_MODE_1 \ + (UINT32_C(0x1) << 31) + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_MODE_LAST \ + HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_MODE_1 +} __rte_packed; + +/* hwrm_async_event_cmpl_eem_cfg_change (size:128b/16B) */ +struct hwrm_async_event_cmpl_eem_cfg_change { + uint16_t type; + /* + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - #define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_IP_ADDR \ - UINT32_C(0x800) + #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_TYPE_SFT 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* Notification of EEM configuration change */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_EVENT_ID_EEM_CFG_CHANGE \ + UINT32_C(0x3c) + #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_EVENT_ID_EEM_CFG_CHANGE + /* Event specific data */ + uint32_t event_data2; + uint8_t opaque_v; /* - * This bit must be '1' for the min_bw field to be - * configured. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - #define HWRM_FUNC_CFG_INPUT_ENABLES_MIN_BW \ - UINT32_C(0x1000) + #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_V UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_OPAQUE_MASK UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; /* - * This bit must be '1' for the max_bw field to be - * configured. + * Value of 1 to indicate EEM TX configuration is enabled. Value of + * 0 to indicate the EEM TX configuration is disabled. */ - #define HWRM_FUNC_CFG_INPUT_ENABLES_MAX_BW \ - UINT32_C(0x2000) + #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_EVENT_DATA1_EEM_TX_ENABLE \ + UINT32_C(0x1) /* - * This bit must be '1' for the async_event_cr field to be - * configured. + * Value of 1 to indicate EEM RX configuration is enabled. Value of 0 + * to indicate the EEM RX configuration is disabled. */ - #define HWRM_FUNC_CFG_INPUT_ENABLES_ASYNC_EVENT_CR \ - UINT32_C(0x4000) + #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_EVENT_DATA1_EEM_RX_ENABLE \ + UINT32_C(0x2) +} __rte_packed; + +/* hwrm_async_event_cmpl_quiesce_done (size:128b/16B) */ +struct hwrm_async_event_cmpl_quiesce_done { + uint16_t type; /* - * This bit must be '1' for the vlan_antispoof_mode field to be - * configured. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - #define HWRM_FUNC_CFG_INPUT_ENABLES_VLAN_ANTISPOOF_MODE \ - UINT32_C(0x8000) + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_TYPE_SFT 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* An event signifying completion of HWRM_FW_STATE_QUIESCE */ + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_ID_QUIESCE_DONE \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_ID_QUIESCE_DONE + /* Event specific data */ + uint32_t event_data2; + /* Status of HWRM_FW_STATE_QUIESCE completion */ + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_MASK \ + UINT32_C(0xff) + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_SFT \ + 0 /* - * This bit must be '1' for the allowed_vlan_pris field to be - * configured. + * The quiesce operation started by HWRM_FW_STATE_QUIESCE + * completed successfully. */ - #define HWRM_FUNC_CFG_INPUT_ENABLES_ALLOWED_VLAN_PRIS \ - UINT32_C(0x10000) + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_SUCCESS \ + UINT32_C(0x0) /* - * This bit must be '1' for the evb_mode field to be - * configured. + * The quiesce operation started by HWRM_FW_STATE_QUIESCE timed + * out. */ - #define HWRM_FUNC_CFG_INPUT_ENABLES_EVB_MODE \ - UINT32_C(0x20000) + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_TIMEOUT \ + UINT32_C(0x1) /* - * This bit must be '1' for the num_mcast_filters field to be - * configured. + * The quiesce operation started by HWRM_FW_STATE_QUIESCE + * encountered an error. */ - #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_MCAST_FILTERS \ - UINT32_C(0x40000) + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_ERROR \ + UINT32_C(0x2) + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_LAST \ + HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_ERROR + /* opaque is 8 b */ + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_OPAQUE_MASK \ + UINT32_C(0xff00) + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_OPAQUE_SFT \ + 8 /* - * This bit must be '1' for the num_hw_ring_grps field to be - * configured. + * Additional information about internal hardware state related to + * idle/quiesce state. QUIESCE may succeed per quiesce_status + * regardless of idle_state_flags. If QUIESCE fails, the host may + * inspect idle_state_flags to determine whether a retry is warranted. */ - #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_HW_RING_GRPS \ + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_IDLE_STATE_FLAGS_MASK \ + UINT32_C(0xff0000) + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_IDLE_STATE_FLAGS_SFT \ + 16 + /* + * Failure to quiesce is caused by host not updating the NQ consumer + * index. + */ + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_IDLE_STATE_FLAGS_INCOMPLETE_NQ \ + UINT32_C(0x10000) + /* Flag 1 indicating partial non-idle state. */ + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_IDLE_STATE_FLAGS_IDLE_STATUS_1 \ + UINT32_C(0x20000) + /* Flag 2 indicating partial non-idle state. */ + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_IDLE_STATE_FLAGS_IDLE_STATUS_2 \ + UINT32_C(0x40000) + /* Flag 3 indicating partial non-idle state. */ + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_IDLE_STATE_FLAGS_IDLE_STATUS_3 \ UINT32_C(0x80000) + uint8_t opaque_v; /* - * This bit must be '1' for the cache_linesize field to be - * configured. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - #define HWRM_FUNC_CFG_INPUT_ENABLES_CACHE_LINESIZE \ - UINT32_C(0x100000) + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_V UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_OPAQUE_MASK UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; + /* Time stamp for error event */ + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA1_TIMESTAMP \ + UINT32_C(0x1) +} __rte_packed; + +/* hwrm_async_event_cmpl_deferred_response (size:128b/16B) */ +struct hwrm_async_event_cmpl_deferred_response { + uint16_t type; /* - * This bit must be '1' for the num_msix field to be - * configured. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_MSIX \ - UINT32_C(0x200000) + #define HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_TYPE_SFT 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; /* - * This bit must be '1' for the link admin state field to be - * configured. + * An event signifying a HWRM command is in progress and its + * response will be deferred */ - #define HWRM_FUNC_CFG_INPUT_ENABLES_ADMIN_LINK_STATE \ - UINT32_C(0x400000) + #define HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_EVENT_ID_DEFERRED_RESPONSE \ + UINT32_C(0x40) + #define HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_EVENT_ID_DEFERRED_RESPONSE + /* Event specific data */ + uint32_t event_data2; /* - * The maximum transmission unit of the function. - * The HWRM should make sure that the mtu of - * the function does not exceed the mtu of the physical - * port that this function is associated with. - * - * In addition to configuring mtu per function, it is - * possible to configure mtu per transmit ring. - * By default, the mtu of each transmit ring associated - * with a function is equal to the mtu of the function. - * The HWRM should make sure that the mtu of each transmit - * ring that is assigned to a function has a valid mtu. + * The PF's mailbox is clear to issue another command. + * A command with this seq_id is still in progress + * and will return a regular HWRM completion when done. + * 'event_data1' field, if non-zero, contains the estimated + * execution time for the command. */ - uint16_t mtu; + #define HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_EVENT_DATA2_SEQ_ID_MASK \ + UINT32_C(0xffff) + #define HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_EVENT_DATA2_SEQ_ID_SFT \ + 0 + uint8_t opaque_v; /* - * The maximum receive unit of the function. - * The HWRM should make sure that the mru of - * the function does not exceed the mru of the physical - * port that this function is associated with. - * - * In addition to configuring mru per function, it is - * possible to configure mru per vnic. - * By default, the mru of each vnic associated - * with a function is equal to the mru of the function. - * The HWRM should make sure that the mru of each vnic - * that is assigned to a function has a valid mru. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - uint16_t mru; + #define HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_V \ + UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_OPAQUE_MASK \ + UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Estimated remaining time of command execution in ms (if not zero) */ + uint32_t event_data1; +} __rte_packed; + +/* hwrm_async_event_cmpl_pfc_watchdog_cfg_change (size:128b/16B) */ +struct hwrm_async_event_cmpl_pfc_watchdog_cfg_change { + uint16_t type; /* - * The number of RSS/COS contexts requested for the - * function. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - uint16_t num_rsscos_ctxs; + #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_TYPE_SFT \ + 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* PFC watchdog configuration change for given port/cos */ + #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_ID_PFC_WATCHDOG_CFG_CHANGE \ + UINT32_C(0x41) + #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_ID_PFC_WATCHDOG_CFG_CHANGE + /* Event specific data */ + uint32_t event_data2; + uint8_t opaque_v; /* - * The number of completion rings requested for the - * function. This does not include the rings allocated - * to any children functions if any. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - uint16_t num_cmpl_rings; + #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_V \ + UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_OPAQUE_MASK \ + UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; /* - * The number of transmit rings requested for the function. - * This does not include the rings allocated to any - * children functions if any. + * 1 in bit position X indicates PFC watchdog should + * be on for COSX */ - uint16_t num_tx_rings; + #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PFC_WD_COS_MASK \ + UINT32_C(0xff) + #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PFC_WD_COS_SFT \ + 0 + /* 1 means PFC WD for COS0 is on, 0 - off. */ + #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PFC_WD_COS_PFC_WD_COS0 \ + UINT32_C(0x1) + /* 1 means PFC WD for COS1 is on, 0 - off. */ + #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PFC_WD_COS_PFC_WD_COS1 \ + UINT32_C(0x2) + /* 1 means PFC WD for COS2 is on, 0 - off. */ + #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PFC_WD_COS_PFC_WD_COS2 \ + UINT32_C(0x4) + /* 1 means PFC WD for COS3 is on, 0 - off. */ + #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PFC_WD_COS_PFC_WD_COS3 \ + UINT32_C(0x8) + /* 1 means PFC WD for COS4 is on, 0 - off. */ + #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PFC_WD_COS_PFC_WD_COS4 \ + UINT32_C(0x10) + /* 1 means PFC WD for COS5 is on, 0 - off. */ + #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PFC_WD_COS_PFC_WD_COS5 \ + UINT32_C(0x20) + /* 1 means PFC WD for COS6 is on, 0 - off. */ + #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PFC_WD_COS_PFC_WD_COS6 \ + UINT32_C(0x40) + /* 1 means PFC WD for COS7 is on, 0 - off. */ + #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PFC_WD_COS_PFC_WD_COS7 \ + UINT32_C(0x80) + /* PORT ID */ + #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PORT_ID_MASK \ + UINT32_C(0xffff00) + #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PORT_ID_SFT \ + 8 +} __rte_packed; + +/* hwrm_async_event_cmpl_fw_trace_msg (size:128b/16B) */ +struct hwrm_async_event_cmpl_fw_trace_msg { + uint16_t type; /* - * The number of receive rings requested for the function. - * This does not include the rings allocated - * to any children functions if any. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - uint16_t num_rx_rings; - /* The requested number of L2 contexts for the function. */ - uint16_t num_l2_ctxs; - /* The requested number of vnics for the function. */ - uint16_t num_vnics; - /* The requested number of statistic contexts for the function. */ - uint16_t num_stat_ctxs; + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TYPE_SFT 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* Firmware trace log message */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_ID_FW_TRACE_MSG \ + UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_ID_FW_TRACE_MSG + /* Trace byte 0 to 3 */ + uint32_t event_data2; + /* Trace byte0 */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA2_BYTE0_MASK \ + UINT32_C(0xff) + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA2_BYTE0_SFT 0 + /* Trace byte1 */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA2_BYTE1_MASK \ + UINT32_C(0xff00) + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA2_BYTE1_SFT 8 + /* Trace byte2 */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA2_BYTE2_MASK \ + UINT32_C(0xff0000) + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA2_BYTE2_SFT 16 + /* Trace byte3 */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA2_BYTE3_MASK \ + UINT32_C(0xff000000) + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA2_BYTE3_SFT 24 + uint8_t opaque_v; /* - * The number of HW ring groups that should - * be reserved for this function. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - uint16_t num_hw_ring_grps; - /* The default MAC address for the function being configured. */ - uint8_t dflt_mac_addr[6]; + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_V UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_OPAQUE_MASK UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_OPAQUE_SFT 1 + /* Trace flags */ + uint8_t timestamp_lo; + /* Indicates if the string is partial or complete. */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_STRING \ + UINT32_C(0x1) + /* Complete string */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_STRING_COMPLETE \ + UINT32_C(0x0) + /* Partial string */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_STRING_PARTIAL \ + UINT32_C(0x1) + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_STRING_LAST \ + HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_STRING_PARTIAL + /* Indicates the firmware that sent the trace message. */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_FIRMWARE \ + UINT32_C(0x2) + /* Primary firmware */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_FIRMWARE_PRIMARY \ + (UINT32_C(0x0) << 1) + /* Secondary firmware */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_FIRMWARE_SECONDARY \ + (UINT32_C(0x1) << 1) + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_FIRMWARE_LAST \ + HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_FIRMWARE_SECONDARY + /* Trace byte 4 to 5 */ + uint16_t timestamp_hi; + /* Trace byte4 */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_HI_BYTE4_MASK \ + UINT32_C(0xff) + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_HI_BYTE4_SFT 0 + /* Trace byte5 */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_HI_BYTE5_MASK \ + UINT32_C(0xff00) + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_HI_BYTE5_SFT 8 + /* Trace byte 6 to 9 */ + uint32_t event_data1; + /* Trace byte6 */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE6_MASK \ + UINT32_C(0xff) + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE6_SFT 0 + /* Trace byte7 */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE7_MASK \ + UINT32_C(0xff00) + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE7_SFT 8 + /* Trace byte8 */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE8_MASK \ + UINT32_C(0xff0000) + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE8_SFT 16 + /* Trace byte9 */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE9_MASK \ + UINT32_C(0xff000000) + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE9_SFT 24 +} __rte_packed; + +/* hwrm_async_event_cmpl_hwrm_error (size:128b/16B) */ +struct hwrm_async_event_cmpl_hwrm_error { + uint16_t type; /* - * The default VLAN for the function being configured. - * This field's format is same as 802.1Q Tag's - * Tag Control Information (TCI) format that includes both - * Priority Code Point (PCP) and VLAN Identifier (VID). + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - uint16_t dflt_vlan; + #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_SFT 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* HWRM Error */ + #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_HWRM_ERROR \ + UINT32_C(0xff) + #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_HWRM_ERROR + /* Event specific data */ + uint32_t event_data2; + /* Severity of HWRM Error */ + #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_MASK \ + UINT32_C(0xff) + #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_SFT 0 + /* Warning */ + #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_WARNING \ + UINT32_C(0x0) + /* Non-fatal Error */ + #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_NONFATAL \ + UINT32_C(0x1) + /* Fatal Error */ + #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_FATAL \ + UINT32_C(0x2) + #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_LAST \ + HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_FATAL + uint8_t opaque_v; /* - * The default IP address for the function being configured. - * This address is only used in enabling source property check. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - uint32_t dflt_ip_addr[4]; + #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_V UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_OPAQUE_MASK UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; + /* Time stamp for error event */ + #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA1_TIMESTAMP \ + UINT32_C(0x1) +} __rte_packed; + +/******************* + * hwrm_func_reset * + *******************/ + + +/* hwrm_func_reset_input (size:192b/24B) */ +struct hwrm_func_reset_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * Minimum BW allocated for this function. - * The HWRM will translate this value into byte counter and - * time interval used for the scheduler inside the device. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - uint32_t min_bw; - /* The bandwidth value. */ - #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_SFT 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_LAST \ - HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_SFT 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_LAST \ - HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_INVALID + uint16_t cmpl_ring; /* - * Maximum BW allocated for this function. - * The HWRM will translate this value into byte counter and - * time interval used for the scheduler inside the device. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - uint32_t max_bw; - /* The bandwidth value. */ - #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_SFT 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_LAST \ - HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_SFT 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_LAST \ - HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID + uint16_t seq_id; /* - * ID of the target completion ring for receiving asynchronous - * event completions. If this field is not valid, then the - * HWRM shall use the default completion ring of the function - * that is being configured as the target completion ring for - * providing any asynchronous event completions for that - * function. - * If this field is valid, then the HWRM shall use the - * completion ring identified by this ID as the target - * completion ring for providing any asynchronous event - * completions for the function that is being configured. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - uint16_t async_event_cr; - /* VLAN Anti-spoofing mode. */ - uint8_t vlan_antispoof_mode; - /* No VLAN anti-spoofing checks are enabled */ - #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_NOCHECK \ - UINT32_C(0x0) - /* Validate VLAN against the configured VLAN(s) */ - #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_VALIDATE_VLAN \ - UINT32_C(0x1) - /* Insert VLAN if it does not exist, otherwise discard */ - #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_INSERT_IF_VLANDNE \ - UINT32_C(0x2) - /* Insert VLAN if it does not exist, override VLAN if it exists */ - #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_INSERT_OR_OVERRIDE_VLAN \ - UINT32_C(0x3) - #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_LAST \ - HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_INSERT_OR_OVERRIDE_VLAN + uint16_t target_id; /* - * This bit field defines VLAN PRIs that are allowed on - * this function. - * If nth bit is set, then VLAN PRI n is allowed on this - * function. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - uint8_t allowed_vlan_pris; + uint64_t resp_addr; + uint32_t enables; /* - * The HWRM shall allow a PF driver to change EVB mode for the - * partition it belongs to. - * The HWRM shall not allow a VF driver to change the EVB mode. - * The HWRM shall take into account the switching of EVB mode - * from one to another and reconfigure hardware resources as - * appropriately. - * The switching from VEB to VEPA mode requires - * the disabling of the loopback traffic. Additionally, - * source knock outs are handled differently in VEB and VEPA - * modes. + * This bit must be '1' for the vf_id_valid field to be + * configured. */ - uint8_t evb_mode; - /* No Edge Virtual Bridging (EVB) */ - #define HWRM_FUNC_CFG_INPUT_EVB_MODE_NO_EVB UINT32_C(0x0) - /* Virtual Ethernet Bridge (VEB) */ - #define HWRM_FUNC_CFG_INPUT_EVB_MODE_VEB UINT32_C(0x1) - /* Virtual Ethernet Port Aggregator (VEPA) */ - #define HWRM_FUNC_CFG_INPUT_EVB_MODE_VEPA UINT32_C(0x2) - #define HWRM_FUNC_CFG_INPUT_EVB_MODE_LAST \ - HWRM_FUNC_CFG_INPUT_EVB_MODE_VEPA - uint8_t options; + #define HWRM_FUNC_RESET_INPUT_ENABLES_VF_ID_VALID UINT32_C(0x1) /* - * This value indicates the PCIE device cache line size. - * The cache line size allows the DMA writes to terminate and - * start at the cache boundary. + * The ID of the VF that this PF is trying to reset. + * Only the parent PF shall be allowed to reset a child VF. + * + * A parent PF driver shall use this field only when a specific child VF + * is requested to be reset. */ - #define HWRM_FUNC_CFG_INPUT_OPTIONS_CACHE_LINESIZE_MASK \ - UINT32_C(0x3) - #define HWRM_FUNC_CFG_INPUT_OPTIONS_CACHE_LINESIZE_SFT 0 - /* Cache Line Size 64 bytes */ - #define HWRM_FUNC_CFG_INPUT_OPTIONS_CACHE_LINESIZE_SIZE_64 \ + uint16_t vf_id; + /* This value indicates the level of a function reset. */ + uint8_t func_reset_level; + /* + * Reset the caller function and its children VFs (if any). If no + * children functions exist, then reset the caller function only. + */ + #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETALL \ UINT32_C(0x0) - /* Cache Line Size 128 bytes */ - #define HWRM_FUNC_CFG_INPUT_OPTIONS_CACHE_LINESIZE_SIZE_128 \ + /* Reset the caller function only */ + #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETME \ UINT32_C(0x1) - #define HWRM_FUNC_CFG_INPUT_OPTIONS_CACHE_LINESIZE_LAST \ - HWRM_FUNC_CFG_INPUT_OPTIONS_CACHE_LINESIZE_SIZE_128 - /* This value is the virtual link admin state setting. */ - #define HWRM_FUNC_CFG_INPUT_OPTIONS_LINK_ADMIN_STATE_MASK \ - UINT32_C(0xc) - #define HWRM_FUNC_CFG_INPUT_OPTIONS_LINK_ADMIN_STATE_SFT 2 - /* Admin state is forced down. */ - #define HWRM_FUNC_CFG_INPUT_OPTIONS_LINK_ADMIN_STATE_FORCED_DOWN \ - (UINT32_C(0x0) << 2) - /* Admin state is forced up. */ - #define HWRM_FUNC_CFG_INPUT_OPTIONS_LINK_ADMIN_STATE_FORCED_UP \ - (UINT32_C(0x1) << 2) - /* Admin state is in auto mode - is to follow the physical link state. */ - #define HWRM_FUNC_CFG_INPUT_OPTIONS_LINK_ADMIN_STATE_AUTO \ - (UINT32_C(0x2) << 2) - #define HWRM_FUNC_CFG_INPUT_OPTIONS_LINK_ADMIN_STATE_LAST \ - HWRM_FUNC_CFG_INPUT_OPTIONS_LINK_ADMIN_STATE_AUTO - /* Reserved for future. */ - #define HWRM_FUNC_CFG_INPUT_OPTIONS_RSVD_MASK \ - UINT32_C(0xf0) - #define HWRM_FUNC_CFG_INPUT_OPTIONS_RSVD_SFT 4 /* - * The number of multicast filters that should - * be reserved for this function on the RX side. + * Reset all children VFs of the caller function driver if the + * caller is a PF driver. + * It is an error to specify this level by a VF driver. + * It is an error to specify this level by a PF driver with + * no children VFs. */ - uint16_t num_mcast_filters; -} __attribute__((packed)); + #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETCHILDREN \ + UINT32_C(0x2) + /* + * Reset a specific VF of the caller function driver if the caller + * is the parent PF driver. + * It is an error to specify this level by a VF driver. + * It is an error to specify this level by a PF driver that is not + * the parent of the VF that is being requested to reset. + */ + #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETVF \ + UINT32_C(0x3) + #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_LAST \ + HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETVF + uint8_t unused_0; +} __rte_packed; -/* hwrm_func_cfg_output (size:128b/16B) */ -struct hwrm_func_cfg_output { +/* hwrm_func_reset_output (size:128b/16B) */ +struct hwrm_func_reset_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -6848,15 +8448,15 @@ struct hwrm_func_cfg_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; /******************** - * hwrm_func_qstats * + * hwrm_func_getfid * ********************/ -/* hwrm_func_qstats_input (size:192b/24B) */ -struct hwrm_func_qstats_input { +/* hwrm_func_getfid_input (size:192b/24B) */ +struct hwrm_func_getfid_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -6873,7 +8473,8 @@ struct hwrm_func_qstats_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -6884,17 +8485,24 @@ struct hwrm_func_qstats_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; + uint32_t enables; /* - * Function ID of the function that is being queried. - * 0xFF... (All Fs) if the query is for the requesting - * function. + * This bit must be '1' for the pci_id field to be + * configured. */ - uint16_t fid; - uint8_t unused_0[6]; -} __attribute__((packed)); + #define HWRM_FUNC_GETFID_INPUT_ENABLES_PCI_ID UINT32_C(0x1) + /* + * This value is the PCI ID of the queried function. + * If ARI is enabled, then it is + * Bus Number (8b):Function Number(8b). Otherwise, it is + * Bus Number (8b):Device Number (5b):Function Number(3b). + */ + uint16_t pci_id; + uint8_t unused_0[2]; +} __rte_packed; -/* hwrm_func_qstats_output (size:1408b/176B) */ -struct hwrm_func_qstats_output { +/* hwrm_func_getfid_output (size:128b/16B) */ +struct hwrm_func_getfid_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -6903,87 +8511,31 @@ struct hwrm_func_qstats_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* Number of transmitted unicast packets on the function. */ - uint64_t tx_ucast_pkts; - /* Number of transmitted multicast packets on the function. */ - uint64_t tx_mcast_pkts; - /* Number of transmitted broadcast packets on the function. */ - uint64_t tx_bcast_pkts; /* - * Number of transmitted packets that were discarded due to - * internal NIC resource problems. For transmit, this - * can only happen if TMP is configured to allow dropping - * in HOL blocking conditions, which is not a normal - * configuration. + * FID value. This value is used to identify operations on the PCI + * bus as belonging to a particular PCI function. */ - uint64_t tx_discard_pkts; + uint16_t fid; + uint8_t unused_0[5]; /* - * Number of dropped packets on transmit path on the function. - * These are packets that have been marked for drop by - * the TE CFA block or are packets that exceeded the - * transmit MTU limit for the function. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - uint64_t tx_drop_pkts; - /* Number of transmitted bytes for unicast traffic on the function. */ - uint64_t tx_ucast_bytes; - /* Number of transmitted bytes for multicast traffic on the function. */ - uint64_t tx_mcast_bytes; - /* Number of transmitted bytes for broadcast traffic on the function. */ - uint64_t tx_bcast_bytes; - /* Number of received unicast packets on the function. */ - uint64_t rx_ucast_pkts; - /* Number of received multicast packets on the function. */ - uint64_t rx_mcast_pkts; - /* Number of received broadcast packets on the function. */ - uint64_t rx_bcast_pkts; - /* - * Number of received packets that were discarded on the function - * due to resource limitations. This can happen for 3 reasons. - * # The BD used for the packet has a bad format. - * # There were no BDs available in the ring for the packet. - * # There were no BDs available on-chip for the packet. - */ - uint64_t rx_discard_pkts; - /* - * Number of dropped packets on received path on the function. - * These are packets that have been marked for drop by the - * RE CFA. - */ - uint64_t rx_drop_pkts; - /* Number of received bytes for unicast traffic on the function. */ - uint64_t rx_ucast_bytes; - /* Number of received bytes for multicast traffic on the function. */ - uint64_t rx_mcast_bytes; - /* Number of received bytes for broadcast traffic on the function. */ - uint64_t rx_bcast_bytes; - /* Number of aggregated unicast packets on the function. */ - uint64_t rx_agg_pkts; - /* Number of aggregated unicast bytes on the function. */ - uint64_t rx_agg_bytes; - /* Number of aggregation events on the function. */ - uint64_t rx_agg_events; - /* Number of aborted aggregations on the function. */ - uint64_t rx_agg_aborts; - uint8_t unused_0[7]; - /* - * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' - * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. - */ - uint8_t valid; -} __attribute__((packed)); - -/*********************** - * hwrm_func_clr_stats * - ***********************/ - - -/* hwrm_func_clr_stats_input (size:192b/24B) */ -struct hwrm_func_clr_stats_input { - /* The HWRM command request type. */ - uint16_t req_type; + uint8_t valid; +} __rte_packed; + +/********************** + * hwrm_func_vf_alloc * + **********************/ + + +/* hwrm_func_vf_alloc_input (size:192b/24B) */ +struct hwrm_func_vf_alloc_input { + /* The HWRM command request type. */ + uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. @@ -6998,7 +8550,8 @@ struct hwrm_func_clr_stats_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -7009,17 +8562,23 @@ struct hwrm_func_clr_stats_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; + uint32_t enables; /* - * Function ID of the function. - * 0xFF... (All Fs) if the query is for the requesting - * function. + * This bit must be '1' for the first_vf_id field to be + * configured. */ - uint16_t fid; - uint8_t unused_0[6]; -} __attribute__((packed)); + #define HWRM_FUNC_VF_ALLOC_INPUT_ENABLES_FIRST_VF_ID UINT32_C(0x1) + /* + * This value is used to identify a Virtual Function (VF). + * The scope of VF ID is local within a PF. + */ + uint16_t first_vf_id; + /* The number of virtual functions requested. */ + uint16_t num_vfs; +} __rte_packed; -/* hwrm_func_clr_stats_output (size:128b/16B) */ -struct hwrm_func_clr_stats_output { +/* hwrm_func_vf_alloc_output (size:128b/16B) */ +struct hwrm_func_vf_alloc_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -7028,7 +8587,9 @@ struct hwrm_func_clr_stats_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - uint8_t unused_0[7]; + /* The ID of the first VF allocated. */ + uint16_t first_vf_id; + uint8_t unused_0[5]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -7037,15 +8598,15 @@ struct hwrm_func_clr_stats_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/************************** - * hwrm_func_vf_resc_free * - **************************/ +/********************* + * hwrm_func_vf_free * + *********************/ -/* hwrm_func_vf_resc_free_input (size:192b/24B) */ -struct hwrm_func_vf_resc_free_input { +/* hwrm_func_vf_free_input (size:192b/24B) */ +struct hwrm_func_vf_free_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -7062,7 +8623,8 @@ struct hwrm_func_vf_resc_free_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -7073,16 +8635,26 @@ struct hwrm_func_vf_resc_free_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; + uint32_t enables; + /* + * This bit must be '1' for the first_vf_id field to be + * configured. + */ + #define HWRM_FUNC_VF_FREE_INPUT_ENABLES_FIRST_VF_ID UINT32_C(0x1) /* * This value is used to identify a Virtual Function (VF). * The scope of VF ID is local within a PF. */ - uint16_t vf_id; - uint8_t unused_0[6]; -} __attribute__((packed)); + uint16_t first_vf_id; + /* + * The number of virtual functions requested. + * 0xFFFF - Cleanup all children of this PF. + */ + uint16_t num_vfs; +} __rte_packed; -/* hwrm_func_vf_resc_free_output (size:128b/16B) */ -struct hwrm_func_vf_resc_free_output { +/* hwrm_func_vf_free_output (size:128b/16B) */ +struct hwrm_func_vf_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -7100,15 +8672,15 @@ struct hwrm_func_vf_resc_free_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/********************** - * hwrm_func_drv_rgtr * - **********************/ +/******************** + * hwrm_func_vf_cfg * + ********************/ -/* hwrm_func_drv_rgtr_input (size:896b/112B) */ -struct hwrm_func_drv_rgtr_input { +/* hwrm_func_vf_cfg_input (size:448b/56B) */ +struct hwrm_func_vf_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -7125,7 +8697,8 @@ struct hwrm_func_drv_rgtr_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -7136,235 +8709,226 @@ struct hwrm_func_drv_rgtr_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - uint32_t flags; + uint32_t enables; /* - * When this bit is '1', the function driver is requesting - * all requests from its children VF drivers to be - * forwarded to itself. - * This flag can only be set by the PF driver. - * If a VF driver sets this flag, it should be ignored - * by the HWRM. + * This bit must be '1' for the mtu field to be + * configured. */ - #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FWD_ALL_MODE \ + #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_MTU \ UINT32_C(0x1) /* - * When this bit is '1', the function is requesting none of - * the requests from its children VF drivers to be - * forwarded to itself. - * This flag can only be set by the PF driver. - * If a VF driver sets this flag, it should be ignored - * by the HWRM. + * This bit must be '1' for the guest_vlan field to be + * configured. */ - #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FWD_NONE_MODE \ + #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_GUEST_VLAN \ UINT32_C(0x2) /* - * When this bit is '1', then ver_maj_8b, ver_min_8b, ver_upd_8b - * fields shall be ignored and ver_maj, ver_min, ver_upd - * and ver_patch shall be used for the driver version information. - * When this bit is '0', then ver_maj_8b, ver_min_8b, ver_upd_8b - * fields shall be used for the driver version information and - * ver_maj, ver_min, ver_upd and ver_patch shall be ignored. + * This bit must be '1' for the async_event_cr field to be + * configured. */ - #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_16BIT_VER_MODE \ + #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_ASYNC_EVENT_CR \ UINT32_C(0x4) /* - * When this bit is '1', the function is indicating support of - * 64bit flow handle. The firmware that only supports 64bit flow - * handle should check this bit before allowing processing of - * HWRM_CFA_FLOW_XXX commands from the requesting function as firmware - * with 64bit flow handle support can only be compatible with drivers - * that support 64bit flow handle. The legacy drivers that don't support - * 64bit flow handle won't be able to use HWRM_CFA_FLOW_XXX commands when - * running with new firmware that only supports 64bit flow handle. The new - * firmware support 64bit flow handle returns HWRM_ERR_CODE_CMD_NOT_SUPPORTED - * status to the legacy driver when encounters these commands. + * This bit must be '1' for the dflt_mac_addr field to be + * configured. */ - #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FLOW_HANDLE_64BIT_MODE \ + #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_DFLT_MAC_ADDR \ UINT32_C(0x8) - uint32_t enables; /* - * This bit must be '1' for the os_type field to be + * This bit must be '1' for the num_rsscos_ctxs field to be * configured. */ - #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_OS_TYPE \ - UINT32_C(0x1) + #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_RSSCOS_CTXS \ + UINT32_C(0x10) /* - * This bit must be '1' for the ver field to be + * This bit must be '1' for the num_cmpl_rings field to be * configured. */ - #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VER \ - UINT32_C(0x2) + #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_CMPL_RINGS \ + UINT32_C(0x20) /* - * This bit must be '1' for the timestamp field to be + * This bit must be '1' for the num_tx_rings field to be * configured. */ - #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_TIMESTAMP \ - UINT32_C(0x4) + #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_TX_RINGS \ + UINT32_C(0x40) /* - * This bit must be '1' for the vf_req_fwd field to be + * This bit must be '1' for the num_rx_rings field to be * configured. */ - #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VF_REQ_FWD \ - UINT32_C(0x8) + #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_RX_RINGS \ + UINT32_C(0x80) /* - * This bit must be '1' for the async_event_fwd field to be + * This bit must be '1' for the num_l2_ctxs field to be * configured. */ - #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_ASYNC_EVENT_FWD \ - UINT32_C(0x10) - /* This value indicates the type of OS. The values are based on CIM_OperatingSystem.mof file as published by the DMTF. */ - uint16_t os_type; - /* Unknown */ - #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_UNKNOWN UINT32_C(0x0) - /* Other OS not listed below. */ - #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_OTHER UINT32_C(0x1) - /* MSDOS OS. */ - #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_MSDOS UINT32_C(0xe) - /* Windows OS. */ - #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WINDOWS UINT32_C(0x12) - /* Solaris OS. */ - #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_SOLARIS UINT32_C(0x1d) - /* Linux OS. */ - #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_LINUX UINT32_C(0x24) - /* FreeBSD OS. */ - #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_FREEBSD UINT32_C(0x2a) - /* VMware ESXi OS. */ - #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_ESXI UINT32_C(0x68) - /* Microsoft Windows 8 64-bit OS. */ - #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WIN864 UINT32_C(0x73) - /* Microsoft Windows Server 2012 R2 OS. */ - #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WIN2012R2 UINT32_C(0x74) - /* UEFI driver. */ - #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_UEFI UINT32_C(0x8000) - #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_LAST \ - HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_UEFI - /* This is the 8bit major version of the driver. */ - uint8_t ver_maj_8b; - /* This is the 8bit minor version of the driver. */ - uint8_t ver_min_8b; - /* This is the 8bit update version of the driver. */ - uint8_t ver_upd_8b; - uint8_t unused_0[3]; + #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_L2_CTXS \ + UINT32_C(0x100) /* - * This is a 32-bit timestamp provided by the driver for - * keep alive. - * The timestamp is in multiples of 1ms. + * This bit must be '1' for the num_vnics field to be + * configured. */ - uint32_t timestamp; - uint8_t unused_1[4]; + #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_VNICS \ + UINT32_C(0x200) /* - * This is a 256-bit bit mask provided by the PF driver for - * letting the HWRM know what commands issued by the VF driver - * to the HWRM should be forwarded to the PF driver. - * Nth bit refers to the Nth req_type. - * - * Setting Nth bit to 1 indicates that requests from the - * VF driver with req_type equal to N shall be forwarded to - * the parent PF driver. - * - * This field is not valid for the VF driver. + * This bit must be '1' for the num_stat_ctxs field to be + * configured. */ - uint32_t vf_req_fwd[8]; + #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_STAT_CTXS \ + UINT32_C(0x400) /* - * This is a 256-bit bit mask provided by the function driver - * (PF or VF driver) to indicate the list of asynchronous event - * completions to be forwarded. - * - * Nth bit refers to the Nth event_id. - * - * Setting Nth bit to 1 by the function driver shall result in - * the HWRM forwarding asynchronous event completion with - * event_id equal to N. - * - * If all bits are set to 0 (value of 0), then the HWRM shall - * not forward any asynchronous event completion to this - * function driver. + * This bit must be '1' for the num_hw_ring_grps field to be + * configured. */ - uint32_t async_event_fwd[8]; - /* This is the 16bit major version of the driver. */ - uint16_t ver_maj; - /* This is the 16bit minor version of the driver. */ - uint16_t ver_min; - /* This is the 16bit update version of the driver. */ - uint16_t ver_upd; - /* This is the 16bit patch version of the driver. */ - uint16_t ver_patch; -} __attribute__((packed)); - -/* hwrm_func_drv_rgtr_output (size:128b/16B) */ -struct hwrm_func_drv_rgtr_output { - /* The specific error status for the command. */ - uint16_t error_code; - /* The HWRM command request type. */ - uint16_t req_type; - /* The sequence ID from the original command. */ - uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; + #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_HW_RING_GRPS \ + UINT32_C(0x800) + /* + * The maximum transmission unit requested on the function. + * The HWRM should make sure that the mtu of + * the function does not exceed the mtu of the physical + * port that this function is associated with. + * + * In addition to requesting mtu per function, it is + * possible to configure mtu per transmit ring. + * By default, the mtu of each transmit ring associated + * with a function is equal to the mtu of the function. + * The HWRM should make sure that the mtu of each transmit + * ring that is assigned to a function has a valid mtu. + */ + uint16_t mtu; + /* + * The guest VLAN for the function being configured. + * This field's format is same as 802.1Q Tag's + * Tag Control Information (TCI) format that includes both + * Priority Code Point (PCP) and VLAN Identifier (VID). + */ + uint16_t guest_vlan; + /* + * ID of the target completion ring for receiving asynchronous + * event completions. If this field is not valid, then the + * HWRM shall use the default completion ring of the function + * that is being configured as the target completion ring for + * providing any asynchronous event completions for that + * function. + * If this field is valid, then the HWRM shall use the + * completion ring identified by this ID as the target + * completion ring for providing any asynchronous event + * completions for the function that is being configured. + */ + uint16_t async_event_cr; + /* + * This value is the current MAC address requested by the VF + * driver to be configured on this VF. A value of + * 00-00-00-00-00-00 indicates no MAC address configuration + * is requested by the VF driver. + * The parent PF driver may reject or overwrite this + * MAC address. + */ + uint8_t dflt_mac_addr[6]; uint32_t flags; /* - * When this bit is '1', it indicates that the - * HWRM_FUNC_DRV_IF_CHANGE call is supported. + * This bit requests that the firmware test to see if all the assets + * requested in this command (i.e. number of TX rings) are available. + * The firmware will return an error if the requested assets are + * not available. The firwmare will NOT reserve the assets if they + * are available. */ - #define HWRM_FUNC_DRV_RGTR_OUTPUT_FLAGS_IF_CHANGE_SUPPORTED \ + #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_TX_ASSETS_TEST \ UINT32_C(0x1) - uint8_t unused_0[3]; /* - * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' - * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. + * This bit requests that the firmware test to see if all the assets + * requested in this command (i.e. number of RX rings) are available. + * The firmware will return an error if the requested assets are + * not available. The firwmare will NOT reserve the assets if they + * are available. */ - uint8_t valid; -} __attribute__((packed)); - -/************************ - * hwrm_func_drv_unrgtr * - ************************/ - - -/* hwrm_func_drv_unrgtr_input (size:192b/24B) */ -struct hwrm_func_drv_unrgtr_input { - /* The HWRM command request type. */ - uint16_t req_type; + #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_RX_ASSETS_TEST \ + UINT32_C(0x2) /* - * The completion ring to send the completion event on. This should - * be the NQ ID returned from the `nq_alloc` HWRM command. + * This bit requests that the firmware test to see if all the assets + * requested in this command (i.e. number of CMPL rings) are available. + * The firmware will return an error if the requested assets are + * not available. The firwmare will NOT reserve the assets if they + * are available. */ - uint16_t cmpl_ring; + #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_CMPL_ASSETS_TEST \ + UINT32_C(0x4) /* - * The sequence ID is used by the driver for tracking multiple - * commands. This ID is treated as opaque data by the firmware and - * the value is returned in the `hwrm_resp_hdr` upon completion. + * This bit requests that the firmware test to see if all the assets + * requested in this command (i.e. number of RSS ctx) are available. + * The firmware will return an error if the requested assets are + * not available. The firwmare will NOT reserve the assets if they + * are available. */ - uint16_t seq_id; + #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_RSSCOS_CTX_ASSETS_TEST \ + UINT32_C(0x8) /* - * The target ID of the command: - * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors - * * 0xFFFF - HWRM + * This bit requests that the firmware test to see if all the assets + * requested in this command (i.e. number of ring groups) are available. + * The firmware will return an error if the requested assets are + * not available. The firwmare will NOT reserve the assets if they + * are available. */ - uint16_t target_id; + #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_RING_GRP_ASSETS_TEST \ + UINT32_C(0x10) /* - * A physical address pointer pointing to a host buffer that the - * command's response data will be written. This can be either a host - * physical address (HPA) or a guest physical address (GPA) and must - * point to a physically contiguous block of memory. + * This bit requests that the firmware test to see if all the assets + * requested in this command (i.e. number of stat ctx) are available. + * The firmware will return an error if the requested assets are + * not available. The firwmare will NOT reserve the assets if they + * are available. */ - uint64_t resp_addr; - uint32_t flags; + #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_STAT_CTX_ASSETS_TEST \ + UINT32_C(0x20) /* - * When this bit is '1', the function driver is notifying - * the HWRM to prepare for the shutdown. + * This bit requests that the firmware test to see if all the assets + * requested in this command (i.e. number of VNICs) are available. + * The firmware will return an error if the requested assets are + * not available. The firwmare will NOT reserve the assets if they + * are available. */ - #define HWRM_FUNC_DRV_UNRGTR_INPUT_FLAGS_PREPARE_FOR_SHUTDOWN \ - UINT32_C(0x1) + #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_VNIC_ASSETS_TEST \ + UINT32_C(0x40) + /* + * This bit requests that the firmware test to see if all the assets + * requested in this command (i.e. number of L2 ctx) are available. + * The firmware will return an error if the requested assets are + * not available. The firwmare will NOT reserve the assets if they + * are available. + */ + #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_L2_CTX_ASSETS_TEST \ + UINT32_C(0x80) + /* + * If this bit is set to 1, the VF driver is requesting FW to enable + * PPP TX PUSH feature on all the TX rings specified in the + * num_tx_rings field. By default, the PPP TX push feature is + * disabled for all the TX rings of the VF. This flag is ignored if + * the num_tx_rings field is not specified or the VF doesn't support + * PPP tx push feature. + */ + #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_PPP_PUSH_MODE_ENABLE \ + UINT32_C(0x100) + /* The number of RSS/COS contexts requested for the VF. */ + uint16_t num_rsscos_ctxs; + /* The number of completion rings requested for the VF. */ + uint16_t num_cmpl_rings; + /* The number of transmit rings requested for the VF. */ + uint16_t num_tx_rings; + /* The number of receive rings requested for the VF. */ + uint16_t num_rx_rings; + /* The number of L2 contexts requested for the VF. */ + uint16_t num_l2_ctxs; + /* The number of vnics requested for the VF. */ + uint16_t num_vnics; + /* The number of statistic contexts requested for the VF. */ + uint16_t num_stat_ctxs; + /* The number of HW ring groups requested for the VF. */ + uint16_t num_hw_ring_grps; uint8_t unused_0[4]; -} __attribute__((packed)); +} __rte_packed; -/* hwrm_func_drv_unrgtr_output (size:128b/16B) */ -struct hwrm_func_drv_unrgtr_output { +/* hwrm_func_vf_cfg_output (size:128b/16B) */ +struct hwrm_func_vf_cfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -7382,15 +8946,15 @@ struct hwrm_func_drv_unrgtr_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/********************** - * hwrm_func_buf_rgtr * - **********************/ +/******************* + * hwrm_func_qcaps * + *******************/ -/* hwrm_func_buf_rgtr_input (size:1024b/128B) */ -struct hwrm_func_buf_rgtr_input { +/* hwrm_func_qcaps_input (size:192b/24B) */ +struct hwrm_func_qcaps_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -7407,7 +8971,8 @@ struct hwrm_func_buf_rgtr_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -7418,272 +8983,433 @@ struct hwrm_func_buf_rgtr_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - uint32_t enables; /* - * This bit must be '1' for the vf_id field to be - * configured. + * Function ID of the function that is being queried. + * 0xFF... (All Fs) if the query is for the requesting + * function. + * 0xFFFE (REQUESTING_PARENT_FID) This is a special FID + * to be used by a trusted VF to query its parent PF. */ - #define HWRM_FUNC_BUF_RGTR_INPUT_ENABLES_VF_ID UINT32_C(0x1) + uint16_t fid; + uint8_t unused_0[6]; +} __rte_packed; + +/* hwrm_func_qcaps_output (size:704b/88B) */ +struct hwrm_func_qcaps_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; /* - * This bit must be '1' for the err_buf_addr field to be - * configured. + * FID value. This value is used to identify operations on the PCI + * bus as belonging to a particular PCI function. */ - #define HWRM_FUNC_BUF_RGTR_INPUT_ENABLES_ERR_BUF_ADDR UINT32_C(0x2) + uint16_t fid; /* - * This value is used to identify a Virtual Function (VF). - * The scope of VF ID is local within a PF. + * Port ID of port that this function is associated with. + * Valid only for the PF. + * 0xFF... (All Fs) if this function is not associated with + * any port. + * 0xFF... (All Fs) if this function is called from a VF. */ - uint16_t vf_id; + uint16_t port_id; + uint32_t flags; + /* If 1, then Push mode is supported on this function. */ + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PUSH_MODE_SUPPORTED \ + UINT32_C(0x1) /* - * This field represents the number of pages used for request - * buffer(s). + * If 1, then the global MSI-X auto-masking is enabled for the + * device. */ - uint16_t req_buf_num_pages; + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_GLOBAL_MSIX_AUTOMASKING \ + UINT32_C(0x2) /* - * This field represents the page size used for request - * buffer(s). + * If 1, then the Precision Time Protocol (PTP) processing + * is supported on this function. + * The HWRM should enable PTP on only a single Physical + * Function (PF) per port. */ - uint16_t req_buf_page_size; - /* 16 bytes */ - #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_16B UINT32_C(0x4) - /* 4 Kbytes */ - #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_4K UINT32_C(0xc) - /* 8 Kbytes */ - #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_8K UINT32_C(0xd) - /* 64 Kbytes */ - #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_64K UINT32_C(0x10) - /* 2 Mbytes */ - #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_2M UINT32_C(0x15) - /* 4 Mbytes */ - #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_4M UINT32_C(0x16) - /* 1 Gbytes */ - #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_1G UINT32_C(0x1e) - #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_LAST \ - HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_1G - /* The length of the request buffer per VF in bytes. */ - uint16_t req_buf_len; - /* The length of the response buffer in bytes. */ - uint16_t resp_buf_len; - uint8_t unused_0[2]; - /* This field represents the page address of page #0. */ - uint64_t req_buf_page_addr0; - /* This field represents the page address of page #1. */ - uint64_t req_buf_page_addr1; - /* This field represents the page address of page #2. */ - uint64_t req_buf_page_addr2; - /* This field represents the page address of page #3. */ - uint64_t req_buf_page_addr3; - /* This field represents the page address of page #4. */ - uint64_t req_buf_page_addr4; - /* This field represents the page address of page #5. */ - uint64_t req_buf_page_addr5; - /* This field represents the page address of page #6. */ - uint64_t req_buf_page_addr6; - /* This field represents the page address of page #7. */ - uint64_t req_buf_page_addr7; - /* This field represents the page address of page #8. */ - uint64_t req_buf_page_addr8; - /* This field represents the page address of page #9. */ - uint64_t req_buf_page_addr9; + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PTP_SUPPORTED \ + UINT32_C(0x4) /* - * This field is used to receive the error reporting from - * the chipset. Only applicable for PFs. + * If 1, then RDMA over Converged Ethernet (RoCE) v1 + * is supported on this function. */ - uint64_t error_buf_addr; + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ROCE_V1_SUPPORTED \ + UINT32_C(0x8) /* - * This field is used to receive the response forwarded by the - * HWRM. + * If 1, then RDMA over Converged Ethernet (RoCE) v2 + * is supported on this function. */ - uint64_t resp_buf_addr; -} __attribute__((packed)); - -/* hwrm_func_buf_rgtr_output (size:128b/16B) */ -struct hwrm_func_buf_rgtr_output { - /* The specific error status for the command. */ - uint16_t error_code; - /* The HWRM command request type. */ - uint16_t req_type; - /* The sequence ID from the original command. */ - uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; - uint8_t unused_0[7]; + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ROCE_V2_SUPPORTED \ + UINT32_C(0x10) /* - * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' - * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. + * If 1, then control and configuration of WoL magic packet + * are supported on this function. */ - uint8_t valid; -} __attribute__((packed)); - -/************************ - * hwrm_func_buf_unrgtr * - ************************/ - - -/* hwrm_func_buf_unrgtr_input (size:192b/24B) */ -struct hwrm_func_buf_unrgtr_input { - /* The HWRM command request type. */ - uint16_t req_type; + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_WOL_MAGICPKT_SUPPORTED \ + UINT32_C(0x20) /* - * The completion ring to send the completion event on. This should - * be the NQ ID returned from the `nq_alloc` HWRM command. + * If 1, then control and configuration of bitmap pattern + * packet are supported on this function. */ - uint16_t cmpl_ring; + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_WOL_BMP_SUPPORTED \ + UINT32_C(0x40) /* - * The sequence ID is used by the driver for tracking multiple - * commands. This ID is treated as opaque data by the firmware and - * the value is returned in the `hwrm_resp_hdr` upon completion. + * If set to 1, then the control and configuration of rate limit + * of an allocated TX ring on the queried function is supported. */ - uint16_t seq_id; + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_TX_RING_RL_SUPPORTED \ + UINT32_C(0x80) /* - * The target ID of the command: - * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors - * * 0xFFFF - HWRM + * If 1, then control and configuration of minimum and + * maximum bandwidths are supported on the queried function. */ - uint16_t target_id; + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_TX_BW_CFG_SUPPORTED \ + UINT32_C(0x100) /* - * A physical address pointer pointing to a host buffer that the - * command's response data will be written. This can be either a host - * physical address (HPA) or a guest physical address (GPA) and must - * point to a physically contiguous block of memory. + * If the query is for a VF, then this flag shall be ignored. + * If this query is for a PF and this flag is set to 1, + * then the PF has the capability to set the rate limits + * on the TX rings of its children VFs. + * If this query is for a PF and this flag is set to 0, then + * the PF does not have the capability to set the rate limits + * on the TX rings of its children VFs. */ - uint64_t resp_addr; - uint32_t enables; + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_VF_TX_RING_RL_SUPPORTED \ + UINT32_C(0x200) /* - * This bit must be '1' for the vf_id field to be - * configured. + * If the query is for a VF, then this flag shall be ignored. + * If this query is for a PF and this flag is set to 1, + * then the PF has the capability to set the minimum and/or + * maximum bandwidths for its children VFs. + * If this query is for a PF and this flag is set to 0, then + * the PF does not have the capability to set the minimum or + * maximum bandwidths for its children VFs. */ - #define HWRM_FUNC_BUF_UNRGTR_INPUT_ENABLES_VF_ID UINT32_C(0x1) + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_VF_BW_CFG_SUPPORTED \ + UINT32_C(0x400) /* - * This value is used to identify a Virtual Function (VF). - * The scope of VF ID is local within a PF. + * Standard TX Ring mode is used for the allocation of TX ring + * and underlying scheduling resources that allow bandwidth + * reservation and limit settings on the queried function. + * If set to 1, then standard TX ring mode is supported + * on the queried function. + * If set to 0, then standard TX ring mode is not available + * on the queried function. */ - uint16_t vf_id; - uint8_t unused_0[2]; -} __attribute__((packed)); - -/* hwrm_func_buf_unrgtr_output (size:128b/16B) */ -struct hwrm_func_buf_unrgtr_output { - /* The specific error status for the command. */ - uint16_t error_code; - /* The HWRM command request type. */ - uint16_t req_type; - /* The sequence ID from the original command. */ - uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; - uint8_t unused_0[7]; + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_STD_TX_RING_MODE_SUPPORTED \ + UINT32_C(0x800) /* - * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' - * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. + * If the query is for a VF, then this flag shall be ignored, + * If this query is for a PF and this flag is set to 1, + * then the PF has the capability to detect GENEVE tunnel + * flags. */ - uint8_t valid; -} __attribute__((packed)); - -/********************** - * hwrm_func_drv_qver * - **********************/ - - -/* hwrm_func_drv_qver_input (size:192b/24B) */ -struct hwrm_func_drv_qver_input { - /* The HWRM command request type. */ - uint16_t req_type; + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_GENEVE_TUN_FLAGS_SUPPORTED \ + UINT32_C(0x1000) /* - * The completion ring to send the completion event on. This should - * be the NQ ID returned from the `nq_alloc` HWRM command. + * If the query is for a VF, then this flag shall be ignored, + * If this query is for a PF and this flag is set to 1, + * then the PF has the capability to detect NVGRE tunnel + * flags. */ - uint16_t cmpl_ring; + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_NVGRE_TUN_FLAGS_SUPPORTED \ + UINT32_C(0x2000) /* - * The sequence ID is used by the driver for tracking multiple - * commands. This ID is treated as opaque data by the firmware and - * the value is returned in the `hwrm_resp_hdr` upon completion. + * If the query is for a VF, then this flag shall be ignored, + * If this query is for a PF and this flag is set to 1, + * then the PF has the capability to detect GRE tunnel + * flags. */ - uint16_t seq_id; + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_GRE_TUN_FLAGS_SUPPORTED \ + UINT32_C(0x4000) /* - * The target ID of the command: - * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors - * * 0xFFFF - HWRM + * If the query is for a VF, then this flag shall be ignored, + * If this query is for a PF and this flag is set to 1, + * then the PF has the capability to detect MPLS tunnel + * flags. */ - uint16_t target_id; + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_MPLS_TUN_FLAGS_SUPPORTED \ + UINT32_C(0x8000) /* - * A physical address pointer pointing to a host buffer that the - * command's response data will be written. This can be either a host - * physical address (HPA) or a guest physical address (GPA) and must - * point to a physically contiguous block of memory. + * If the query is for a VF, then this flag shall be ignored, + * If this query is for a PF and this flag is set to 1, + * then the PF has the capability to support pcie stats. */ - uint64_t resp_addr; - /* Reserved for future use. */ - uint32_t reserved; + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PCIE_STATS_SUPPORTED \ + UINT32_C(0x10000) /* - * Function ID of the function that is being queried. - * 0xFF... (All Fs) if the query is for the requesting - * function. + * If the query is for a VF, then this flag shall be ignored, + * If this query is for a PF and this flag is set to 1, + * then the PF has the capability to adopt the VF's belonging + * to another PF. */ - uint16_t fid; - uint8_t unused_0[2]; -} __attribute__((packed)); - -/* hwrm_func_drv_qver_output (size:256b/32B) */ -struct hwrm_func_drv_qver_output { - /* The specific error status for the command. */ - uint16_t error_code; - /* The HWRM command request type. */ - uint16_t req_type; - /* The sequence ID from the original command. */ - uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; - /* This value indicates the type of OS. The values are based on CIM_OperatingSystem.mof file as published by the DMTF. */ - uint16_t os_type; - /* Unknown */ - #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_UNKNOWN UINT32_C(0x0) - /* Other OS not listed below. */ - #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_OTHER UINT32_C(0x1) - /* MSDOS OS. */ - #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_MSDOS UINT32_C(0xe) - /* Windows OS. */ - #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_WINDOWS UINT32_C(0x12) - /* Solaris OS. */ - #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_SOLARIS UINT32_C(0x1d) - /* Linux OS. */ - #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_LINUX UINT32_C(0x24) - /* FreeBSD OS. */ - #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_FREEBSD UINT32_C(0x2a) - /* VMware ESXi OS. */ - #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_ESXI UINT32_C(0x68) - /* Microsoft Windows 8 64-bit OS. */ - #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_WIN864 UINT32_C(0x73) - /* Microsoft Windows Server 2012 R2 OS. */ - #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_WIN2012R2 UINT32_C(0x74) - /* UEFI driver. */ - #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_UEFI UINT32_C(0x8000) - #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_LAST \ - HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_UEFI - /* This is the 8bit major version of the driver. */ - uint8_t ver_maj_8b; - /* This is the 8bit minor version of the driver. */ - uint8_t ver_min_8b; - /* This is the 8bit update version of the driver. */ - uint8_t ver_upd_8b; - uint8_t unused_0[3]; - /* This is the 16bit major version of the driver. */ - uint16_t ver_maj; - /* This is the 16bit minor version of the driver. */ - uint16_t ver_min; - /* This is the 16bit update version of the driver. */ - uint16_t ver_upd; - /* This is the 16bit patch version of the driver. */ - uint16_t ver_patch; - uint8_t unused_1[7]; + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ADOPTED_PF_SUPPORTED \ + UINT32_C(0x20000) + /* + * If the query is for a VF, then this flag shall be ignored, + * If this query is for a PF and this flag is set to 1, + * then the PF has the administrative privilege to configure another PF + */ + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ADMIN_PF_SUPPORTED \ + UINT32_C(0x40000) + /* + * If the query is for a VF, then this flag shall be ignored. + * If this query is for a PF and this flag is set to 1, then + * the PF will know that the firmware has the capability to track + * the virtual link status. + */ + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_LINK_ADMIN_STATUS_SUPPORTED \ + UINT32_C(0x80000) + /* + * If 1, then this function supports the push mode that uses + * write combine buffers and the long inline tx buffer descriptor. + */ + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_WCB_PUSH_MODE \ + UINT32_C(0x100000) + /* + * If 1, then FW has capability to allocate TX rings dynamically + * in ring alloc even if PF reserved pool is zero. + * This bit will be used only for PFs. + */ + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_DYNAMIC_TX_RING_ALLOC \ + UINT32_C(0x200000) + /* + * When this bit is '1', it indicates that core firmware is + * capable of Hot Reset. + */ + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_HOT_RESET_CAPABLE \ + UINT32_C(0x400000) + /* + * This flag will be set to 1 by the FW if FW supports adapter error + * recovery. + */ + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ERROR_RECOVERY_CAPABLE \ + UINT32_C(0x800000) + /* + * If the query is for a VF, then this flag shall be ignored. + * If this query is for a PF and this flag is set to 1, then + * the PF has the capability to support extended stats. + */ + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_STATS_SUPPORTED \ + UINT32_C(0x1000000) + /* + * If the query is for a VF, then this flag shall be ignored. + * If this query is for a PF and this flag is set to 1, then host + * must initiate reset or reload (or fastboot) the firmware image + * upon detection of device shutdown state. + */ + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ERR_RECOVER_RELOAD \ + UINT32_C(0x2000000) + /* + * If the query is for a VF, then this flag (always set to 0) shall + * be ignored. If this query is for a PF and this flag is set to 1, + * host, when registered for the default vnic change async event, + * receives async notification whenever a default vnic state is + * changed for any of child or adopted VFs. + */ + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_NOTIFY_VF_DEF_VNIC_CHNG_SUPPORTED \ + UINT32_C(0x4000000) + /* If set to 1, then the vlan acceleration for TX is disabled. */ + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_VLAN_ACCELERATION_TX_DISABLED \ + UINT32_C(0x8000000) + /* + * When this bit is '1', it indicates that core firmware supports + * DBG_COREDUMP_XXX commands. + */ + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_COREDUMP_CMD_SUPPORTED \ + UINT32_C(0x10000000) + /* + * When this bit is '1', it indicates that core firmware supports + * DBG_CRASHDUMP_XXX commands. + */ + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_CRASHDUMP_CMD_SUPPORTED \ + UINT32_C(0x20000000) + /* + * If the query is for a VF, then this flag should be ignored. + * If the query is for a PF and this flag is set to 1, then + * the PF has the capability to support retrieval of + * rx_port_stats_ext_pfc_wd statistics (supported by the PFC + * WatchDog feature) via the hwrm_port_qstats_ext_pfc_wd command. + * If this flag is set to 1, only that (supported) command should + * be used for retrieval of PFC related statistics (rather than + * hwrm_port_qstats_ext command, which could previously be used). + */ + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PFC_WD_STATS_SUPPORTED \ + UINT32_C(0x40000000) + /* + * When this bit is '1', it indicates that core firmware supports + * DBG_QCAPS command + */ + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_DBG_QCAPS_CMD_SUPPORTED \ + UINT32_C(0x80000000) + /* + * This value is current MAC address configured for this + * function. A value of 00-00-00-00-00-00 indicates no + * MAC address is currently configured. + */ + uint8_t mac_address[6]; + /* + * The maximum number of RSS/COS contexts that can be + * allocated to the function. + */ + uint16_t max_rsscos_ctx; + /* + * The maximum number of completion rings that can be + * allocated to the function. + */ + uint16_t max_cmpl_rings; + /* + * The maximum number of transmit rings that can be + * allocated to the function. + */ + uint16_t max_tx_rings; + /* + * The maximum number of receive rings that can be + * allocated to the function. + */ + uint16_t max_rx_rings; + /* + * The maximum number of L2 contexts that can be + * allocated to the function. + */ + uint16_t max_l2_ctxs; + /* + * The maximum number of VNICs that can be + * allocated to the function. + */ + uint16_t max_vnics; + /* + * The identifier for the first VF enabled on a PF. This + * is valid only on the PF with SR-IOV enabled. + * 0xFF... (All Fs) if this command is called on a PF with + * SR-IOV disabled or on a VF. + */ + uint16_t first_vf_id; + /* + * The maximum number of VFs that can be + * allocated to the function. This is valid only on the + * PF with SR-IOV enabled. 0xFF... (All Fs) if this + * command is called on a PF with SR-IOV disabled or + * on a VF. + */ + uint16_t max_vfs; + /* + * The maximum number of statistic contexts that can be + * allocated to the function. + */ + uint16_t max_stat_ctx; + /* + * The maximum number of Encapsulation records that can be + * offloaded by this function. + */ + uint32_t max_encap_records; + /* + * The maximum number of decapsulation records that can + * be offloaded by this function. + */ + uint32_t max_decap_records; + /* + * The maximum number of Exact Match (EM) flows that can be + * offloaded by this function on the TX side. + */ + uint32_t max_tx_em_flows; + /* + * The maximum number of Wildcard Match (WM) flows that can + * be offloaded by this function on the TX side. + */ + uint32_t max_tx_wm_flows; + /* + * The maximum number of Exact Match (EM) flows that can be + * offloaded by this function on the RX side. + */ + uint32_t max_rx_em_flows; + /* + * The maximum number of Wildcard Match (WM) flows that can + * be offloaded by this function on the RX side. + */ + uint32_t max_rx_wm_flows; + /* + * The maximum number of multicast filters that can + * be supported by this function on the RX side. + */ + uint32_t max_mcast_filters; + /* + * The maximum value of flow_id that can be supported + * in completion records. + */ + uint32_t max_flow_id; + /* + * The maximum number of HW ring groups that can be + * supported on this function. + */ + uint32_t max_hw_ring_grps; + /* + * The maximum number of strict priority transmit rings + * that can be allocated to the function. + * This number indicates the maximum number of TX rings + * that can be assigned strict priorities out of the + * maximum number of TX rings that can be allocated + * (max_tx_rings) to the function. + */ + uint16_t max_sp_tx_rings; + uint8_t unused_0[2]; + uint32_t flags_ext; + /* + * If 1, the device can be configured to set the ECN bits in the + * IP header of received packets if the receive queue length + * exceeds a given threshold. + */ + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_ECN_MARK_SUPPORTED \ + UINT32_C(0x1) + /* + * If 1, the device can report the number of received packets + * that it marked as having experienced congestion. + */ + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_ECN_STATS_SUPPORTED \ + UINT32_C(0x2) + /* + * If 1, the device can report extended hw statistics (including + * additional tpa statistics). + */ + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_EXT_HW_STATS_SUPPORTED \ + UINT32_C(0x4) + /* + * If set to 1, then the core firmware has support to enable/ + * disable hot reset support for interface dynamically through + * HWRM_FUNC_CFG. + */ + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_HOT_RESET_IF_SUPPORT \ + UINT32_C(0x8) + /* If 1, the proxy mode is supported on this function */ + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_PROXY_MODE_SUPPORT \ + UINT32_C(0x10) + /* + * If 1, the tx rings source interface override feature is supported + * on this function. + */ + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_TX_PROXY_SRC_INTF_OVERRIDE_SUPPORT \ + UINT32_C(0x20) + /* + * If 1, the device supports scheduler queues. SQs can be managed + * using RING_SQ_ALLOC/CFG/FREE commands. + */ + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_SQ_SUPPORTED \ + UINT32_C(0x40) + /* + * If set to 1, then this function supports the TX push mode that + * uses ping-pong buffers from the push pages. + */ + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_PPP_PUSH_MODE_SUPPORTED \ + UINT32_C(0x80) + /* The maximum number of SQs supported by this device. */ + uint8_t max_sqs; + uint8_t unused_1[2]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -7692,15 +9418,15 @@ struct hwrm_func_drv_qver_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/**************************** - * hwrm_func_resource_qcaps * - ****************************/ +/****************** + * hwrm_func_qcfg * + ******************/ -/* hwrm_func_resource_qcaps_input (size:192b/24B) */ -struct hwrm_func_resource_qcaps_input { +/* hwrm_func_qcfg_input (size:192b/24B) */ +struct hwrm_func_qcfg_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -7717,7 +9443,8 @@ struct hwrm_func_resource_qcaps_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -7732,13 +9459,15 @@ struct hwrm_func_resource_qcaps_input { * Function ID of the function that is being queried. * 0xFF... (All Fs) if the query is for the requesting * function. + * 0xFFFE (REQUESTING_PARENT_FID) This is a special FID + * to be used by a trusted VF to query its parent PF. */ uint16_t fid; uint8_t unused_0[6]; -} __attribute__((packed)); +} __rte_packed; -/* hwrm_func_resource_qcaps_output (size:448b/56B) */ -struct hwrm_func_resource_qcaps_output { +/* hwrm_func_qcfg_output (size:768b/96B) */ +struct hwrm_func_qcfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -7747,1213 +9476,9511 @@ struct hwrm_func_resource_qcaps_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* Maximum guaranteed number of VFs supported by PF. Not applicable for VFs. */ - uint16_t max_vfs; - /* Maximum guaranteed number of MSI-X vectors supported by function */ - uint16_t max_msix; - /* Hint of strategy to be used by PF driver to reserve resources for its VF */ - uint16_t vf_reservation_strategy; - /* The PF driver should evenly divide its remaining resources among all VFs. */ - #define HWRM_FUNC_RESOURCE_QCAPS_OUTPUT_VF_RESERVATION_STRATEGY_MAXIMAL \ - UINT32_C(0x0) - /* The PF driver should only reserve minimal resources for each VF. */ - #define HWRM_FUNC_RESOURCE_QCAPS_OUTPUT_VF_RESERVATION_STRATEGY_MINIMAL \ - UINT32_C(0x1) /* - * The PF driver should not reserve any resources for each VF until the - * the VF interface is brought up. + * FID value. This value is used to identify operations on the PCI + * bus as belonging to a particular PCI function. */ - #define HWRM_FUNC_RESOURCE_QCAPS_OUTPUT_VF_RESERVATION_STRATEGY_MINIMAL_STATIC \ - UINT32_C(0x2) - #define HWRM_FUNC_RESOURCE_QCAPS_OUTPUT_VF_RESERVATION_STRATEGY_LAST \ - HWRM_FUNC_RESOURCE_QCAPS_OUTPUT_VF_RESERVATION_STRATEGY_MINIMAL_STATIC - /* Minimum guaranteed number of RSS/COS contexts */ - uint16_t min_rsscos_ctx; - /* Maximum non-guaranteed number of RSS/COS contexts */ - uint16_t max_rsscos_ctx; - /* Minimum guaranteed number of completion rings */ - uint16_t min_cmpl_rings; - /* Maximum non-guaranteed number of completion rings */ - uint16_t max_cmpl_rings; - /* Minimum guaranteed number of transmit rings */ - uint16_t min_tx_rings; - /* Maximum non-guaranteed number of transmit rings */ - uint16_t max_tx_rings; - /* Minimum guaranteed number of receive rings */ - uint16_t min_rx_rings; - /* Maximum non-guaranteed number of receive rings */ - uint16_t max_rx_rings; - /* Minimum guaranteed number of L2 contexts */ - uint16_t min_l2_ctxs; - /* Maximum non-guaranteed number of L2 contexts */ - uint16_t max_l2_ctxs; - /* Minimum guaranteed number of VNICs */ - uint16_t min_vnics; - /* Maximum non-guaranteed number of VNICs */ - uint16_t max_vnics; - /* Minimum guaranteed number of statistic contexts */ - uint16_t min_stat_ctx; - /* Maximum non-guaranteed number of statistic contexts */ - uint16_t max_stat_ctx; - /* Minimum guaranteed number of ring groups */ - uint16_t min_hw_ring_grps; - /* Maximum non-guaranteed number of ring groups */ - uint16_t max_hw_ring_grps; + uint16_t fid; /* - * Maximum number of inputs into the transmit scheduler for this function. - * The number of TX rings assigned to the function cannot exceed this value. + * Port ID of port that this function is associated with. + * 0xFF... (All Fs) if this function is not associated with + * any port. */ - uint16_t max_tx_scheduler_inputs; + uint16_t port_id; + /* + * This value is the current VLAN setting for this + * function. The value of 0 for this field indicates + * no priority tagging or VLAN is used. + * This field's format is same as 802.1Q Tag's + * Tag Control Information (TCI) format that includes both + * Priority Code Point (PCP) and VLAN Identifier (VID). + */ + uint16_t vlan; uint16_t flags; /* - * When this bit is '1', it indicates that VF_RESOURCE_CFG supports - * feature to reserve all minimum resources when minimum >= 1, otherwise - * returns an error. + * If 1, then magic packet based Out-Of-Box WoL is enabled on + * the port associated with this function. */ - #define HWRM_FUNC_RESOURCE_QCAPS_OUTPUT_FLAGS_MIN_GUARANTEED \ + #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_OOB_WOL_MAGICPKT_ENABLED \ UINT32_C(0x1) - uint8_t unused_0[5]; /* - * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' - * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. + * If 1, then bitmap pattern based Out-Of-Box WoL packet is enabled + * on the port associated with this function. */ - uint8_t valid; -} __attribute__((packed)); - -/********************************* - * hwrm_func_backing_store_qcaps * - *********************************/ - - -/* hwrm_func_backing_store_qcaps_input (size:128b/16B) */ -struct hwrm_func_backing_store_qcaps_input { - /* The HWRM command request type. */ - uint16_t req_type; + #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_OOB_WOL_BMP_ENABLED \ + UINT32_C(0x2) /* - * The completion ring to send the completion event on. This should - * be the NQ ID returned from the `nq_alloc` HWRM command. + * If set to 1, then FW based DCBX agent is enabled and running on + * the port associated with this function. + * If set to 0, then DCBX agent is not running in the firmware. */ - uint16_t cmpl_ring; + #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_FW_DCBX_AGENT_ENABLED \ + UINT32_C(0x4) /* - * The sequence ID is used by the driver for tracking multiple - * commands. This ID is treated as opaque data by the firmware and - * the value is returned in the `hwrm_resp_hdr` upon completion. + * Standard TX Ring mode is used for the allocation of TX ring + * and underlying scheduling resources that allow bandwidth + * reservation and limit settings on the queried function. + * If set to 1, then standard TX ring mode is enabled + * on the queried function. + * If set to 0, then the standard TX ring mode is disabled + * on the queried function. In this extended TX ring resource + * mode, the minimum and maximum bandwidth settings are not + * supported to allow the allocation of TX rings to span multiple + * scheduler nodes. */ - uint16_t seq_id; + #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_STD_TX_RING_MODE_ENABLED \ + UINT32_C(0x8) /* - * The target ID of the command: - * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors - * * 0xFFFF - HWRM + * If set to 1 then FW based LLDP agent is enabled and running on + * the port associated with this function. + * If set to 0 then the LLDP agent is not running in the firmware. */ - uint16_t target_id; + #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_FW_LLDP_AGENT_ENABLED \ + UINT32_C(0x10) /* - * A physical address pointer pointing to a host buffer that the - * command's response data will be written. This can be either a host - * physical address (HPA) or a guest physical address (GPA) and must - * point to a physically contiguous block of memory. + * If set to 1, then multi-host mode is active for this function. + * If set to 0, then multi-host mode is inactive for this function + * or not applicable for this device. */ - uint64_t resp_addr; -} __attribute__((packed)); - -/* hwrm_func_backing_store_qcaps_output (size:576b/72B) */ -struct hwrm_func_backing_store_qcaps_output { - /* The specific error status for the command. */ - uint16_t error_code; - /* The HWRM command request type. */ - uint16_t req_type; - /* The sequence ID from the original command. */ - uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; - /* Maximum number of QP context entries supported for this function. */ - uint32_t qp_max_entries; + #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_MULTI_HOST \ + UINT32_C(0x20) /* - * Minimum number of QP context entries that are needed to be reserved - * for QP1 for the PF and its VFs. PF drivers must allocate at least - * this many QP context entries, even if RoCE will not be used. + * If the function that is being queried is a PF, then the HWRM shall + * set this field to 0 and the HWRM client shall ignore this field. + * If the function that is being queried is a VF, then the HWRM shall + * set this field to 1 if the queried VF is trusted, otherwise the HWRM + * shall set this field to 0. */ - uint16_t qp_min_qp1_entries; - /* Maximum number of QP context entries that can be used for L2. */ - uint16_t qp_max_l2_entries; - /* Number of bytes that must be allocated for each context entry. */ - uint16_t qp_entry_size; - /* Maximum number of SRQ context entries that can be used for L2. */ - uint16_t srq_max_l2_entries; - /* Maximum number of SRQ context entries supported for this function. */ - uint32_t srq_max_entries; - /* Number of bytes that must be allocated for each context entry. */ - uint16_t srq_entry_size; - /* Maximum number of CQ context entries that can be used for L2. */ - uint16_t cq_max_l2_entries; - /* Maximum number of CQ context entries supported for this function. */ - uint32_t cq_max_entries; - /* Number of bytes that must be allocated for each context entry. */ - uint16_t cq_entry_size; - /* Maximum number of VNIC context entries supported for this function. */ - uint16_t vnic_max_vnic_entries; - /* Maximum number of Ring table context entries supported for this function. */ - uint16_t vnic_max_ring_table_entries; - /* Number of bytes that must be allocated for each context entry. */ - uint16_t vnic_entry_size; - /* Maximum number of statistic context entries supported for this function. */ - uint32_t stat_max_entries; - /* Number of bytes that must be allocated for each context entry. */ - uint16_t stat_entry_size; - /* Number of bytes that must be allocated for each context entry. */ - uint16_t tqm_entry_size; - /* Minimum number of TQM context entries required per ring. */ - uint32_t tqm_min_entries_per_ring; + #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_TRUSTED_VF \ + UINT32_C(0x40) /* - * Maximum number of TQM context entries supported per ring. This is - * actually a recommended TQM queue size based on worst case usage of - * the TQM queue. - * - * TQM fastpath rings should be sized large enough to accommodate the - * maximum number of QPs (either L2 or RoCE, or both if shared) - * that can be enqueued to the TQM ring. - * - * TQM slowpath rings should be sized as follows: - * - * num_entries = num_vnics + num_l2_tx_rings + num_roce_qps + tqm_min_size - * - * Where: - * num_vnics is the number of VNICs allocated in the VNIC backing store - * num_l2_tx_rings is the number of L2 rings in the QP backing store - * num_roce_qps is the number of RoCE QPs in the QP backing store - * tqm_min_size is tqm_min_entries_per_ring reported by - * HWRM_FUNC_BACKING_STORE_QCAPS - * - * Note that TQM ring sizes cannot be extended while the system is - * operational. If a PF driver needs to extend a TQM ring, it needs - * to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate - * the backing store. + * If set to 1, then secure mode is enabled for this function or device. + * If set to 0, then secure mode is disabled (or normal mode) for this + * function or device. */ - uint32_t tqm_max_entries_per_ring; - /* Maximum number of MR/AV context entries supported for this function. */ - uint32_t mrav_max_entries; - /* Number of bytes that must be allocated for each context entry. */ - uint16_t mrav_entry_size; - /* Number of bytes that must be allocated for each context entry. */ - uint16_t tim_entry_size; - /* Maximum number of Timer context entries supported for this function. */ - uint32_t tim_max_entries; - uint8_t unused_0[2]; + #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_SECURE_MODE_ENABLED \ + UINT32_C(0x80) /* - * The number of entries specified for any TQM ring must be a - * multiple of this value to prevent any resource allocation - * limitations. + * If set to 1, then this PF is enabled with a preboot driver that + * requires access to the legacy L2 ring model and legacy 32b + * doorbells. If set to 0, then this PF is not allowed to use + * the legacy L2 rings. This feature is not allowed on VFs and + * is only relevant for devices that require a context backing + * store. */ - uint8_t tqm_entries_multiple; + #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_PREBOOT_LEGACY_L2_RINGS \ + UINT32_C(0x100) /* - * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' - * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. + * If set to 1, then the firmware and all currently registered driver + * instances support hot reset. The hot reset support will be updated + * dynamically based on the driver interface advertisement. + * If set to 0, then the adapter is not currently able to initiate + * hot reset. */ - uint8_t valid; -} __attribute__((packed)); - -/******************************* - * hwrm_func_backing_store_cfg * - *******************************/ - - -/* hwrm_func_backing_store_cfg_input (size:2048b/256B) */ -struct hwrm_func_backing_store_cfg_input { - /* The HWRM command request type. */ - uint16_t req_type; + #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_HOT_RESET_ALLOWED \ + UINT32_C(0x200) /* - * The completion ring to send the completion event on. This should - * be the NQ ID returned from the `nq_alloc` HWRM command. + * If set to 1, then the PPP tx push mode is enabled for all the + * reserved TX rings of this function. If set to 0, then PPP tx push + * mode is disabled for all the reserved TX rings of this function. */ - uint16_t cmpl_ring; + #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_PPP_PUSH_MODE_ENABLED \ + UINT32_C(0x400) /* - * The sequence ID is used by the driver for tracking multiple - * commands. This ID is treated as opaque data by the firmware and - * the value is returned in the `hwrm_resp_hdr` upon completion. + * This value is current MAC address configured for this + * function. A value of 00-00-00-00-00-00 indicates no + * MAC address is currently configured. */ - uint16_t seq_id; + uint8_t mac_address[6]; /* - * The target ID of the command: - * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors - * * 0xFFFF - HWRM + * This value is current PCI ID of this + * function. If ARI is enabled, then it is + * Bus Number (8b):Function Number(8b). Otherwise, it is + * Bus Number (8b):Device Number (4b):Function Number(4b). + * If multi-host mode is active, the 4 lsb will indicate + * the PF index for this function. */ - uint16_t target_id; + uint16_t pci_id; /* - * A physical address pointer pointing to a host buffer that the - * command's response data will be written. This can be either a host - * physical address (HPA) or a guest physical address (GPA) and must - * point to a physically contiguous block of memory. + * The number of RSS/COS contexts currently + * allocated to the function. */ - uint64_t resp_addr; - uint32_t flags; + uint16_t alloc_rsscos_ctx; /* - * When set, the firmware only uses on-chip resources and does not - * expect any backing store to be provided by the host driver. This - * mode provides minimal L2 functionality (e.g. limited L2 resources, - * no RoCE). + * The number of completion rings currently allocated to + * the function. This does not include the rings allocated + * to any children functions if any. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_FLAGS_PREBOOT_MODE \ - UINT32_C(0x1) - uint32_t enables; + uint16_t alloc_cmpl_rings; /* - * This bit must be '1' for the qp fields to be - * configured. + * The number of transmit rings currently allocated to + * the function. This does not include the rings allocated + * to any children functions if any. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_QP \ - UINT32_C(0x1) + uint16_t alloc_tx_rings; /* - * This bit must be '1' for the srq fields to be - * configured. + * The number of receive rings currently allocated to + * the function. This does not include the rings allocated + * to any children functions if any. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_SRQ \ - UINT32_C(0x2) + uint16_t alloc_rx_rings; + /* The allocated number of L2 contexts to the function. */ + uint16_t alloc_l2_ctx; + /* The allocated number of vnics to the function. */ + uint16_t alloc_vnics; /* - * This bit must be '1' for the cq fields to be - * configured. + * The maximum transmission unit of the function. + * If the reported mtu value is non-zero then it will used for the + * rings allocated on this function. otherwise the default + * value is used if ring MTU is not specified. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_CQ \ - UINT32_C(0x4) + uint16_t mtu; /* - * This bit must be '1' for the vnic fields to be - * configured. + * The maximum receive unit of the function. + * For vnics allocated on this function, this default + * value is used if vnic MRU is not specified. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_VNIC \ - UINT32_C(0x8) + uint16_t mru; + /* The statistics context assigned to a function. */ + uint16_t stat_ctx_id; /* - * This bit must be '1' for the stat fields to be - * configured. + * The HWRM shall return Unknown value for this field + * when this command is used to query VF's configuration. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_STAT \ - UINT32_C(0x10) + uint8_t port_partition_type; + /* Single physical function */ + #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_SPF UINT32_C(0x0) + /* Multiple physical functions */ + #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_MPFS UINT32_C(0x1) + /* Network Partitioning 1.0 */ + #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_0 UINT32_C(0x2) + /* Network Partitioning 1.5 */ + #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_5 UINT32_C(0x3) + /* Network Partitioning 2.0 */ + #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR2_0 UINT32_C(0x4) + /* Unknown */ + #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_UNKNOWN \ + UINT32_C(0xff) + #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_LAST \ + HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_UNKNOWN /* - * This bit must be '1' for the tqm_sp fields to be - * configured. + * This field will indicate number of physical functions on this port_partition. + * HWRM shall return unavail (i.e. value of 0) for this field + * when this command is used to query VF's configuration or + * from older firmware that doesn't support this field. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_SP \ - UINT32_C(0x20) + uint8_t port_pf_cnt; + /* number of PFs is not available */ + #define HWRM_FUNC_QCFG_OUTPUT_PORT_PF_CNT_UNAVAIL UINT32_C(0x0) + #define HWRM_FUNC_QCFG_OUTPUT_PORT_PF_CNT_LAST \ + HWRM_FUNC_QCFG_OUTPUT_PORT_PF_CNT_UNAVAIL /* - * This bit must be '1' for the tqm_ring0 fields to be - * configured. + * The default VNIC ID assigned to a function that is + * being queried. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING0 \ - UINT32_C(0x40) + uint16_t dflt_vnic_id; + uint16_t max_mtu_configured; /* - * This bit must be '1' for the tqm_ring1 fields to be + * Minimum BW allocated for this function. + * The HWRM will translate this value into byte counter and + * time interval used for the scheduler inside the device. + * A value of 0 indicates the minimum bandwidth is not * configured. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING1 \ - UINT32_C(0x80) + uint32_t min_bw; + /* The bandwidth value. */ + #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_SFT 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE_LAST \ + HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_SFT 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_LAST \ + HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_INVALID /* - * This bit must be '1' for the tqm_ring2 fields to be + * Maximum BW allocated for this function. + * The HWRM will translate this value into byte counter and + * time interval used for the scheduler inside the device. + * A value of 0 indicates that the maximum bandwidth is not * configured. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING2 \ - UINT32_C(0x100) + uint32_t max_bw; + /* The bandwidth value. */ + #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_SFT 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE_LAST \ + HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_SFT 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_LAST \ + HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_INVALID /* - * This bit must be '1' for the tqm_ring3 fields to be - * configured. + * This value indicates the Edge virtual bridge mode for the + * domain that this function belongs to. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING3 \ - UINT32_C(0x200) + uint8_t evb_mode; + /* No Edge Virtual Bridging (EVB) */ + #define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_NO_EVB UINT32_C(0x0) + /* Virtual Ethernet Bridge (VEB) */ + #define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_VEB UINT32_C(0x1) + /* Virtual Ethernet Port Aggregator (VEPA) */ + #define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_VEPA UINT32_C(0x2) + #define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_LAST \ + HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_VEPA + uint8_t options; /* - * This bit must be '1' for the tqm_ring4 fields to be - * configured. + * This value indicates the PCIE device cache line size. + * The cache line size allows the DMA writes to terminate and + * start at the cache boundary. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING4 \ - UINT32_C(0x400) + #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_CACHE_LINESIZE_MASK \ + UINT32_C(0x3) + #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_CACHE_LINESIZE_SFT 0 + /* Cache Line Size 64 bytes */ + #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_CACHE_LINESIZE_SIZE_64 \ + UINT32_C(0x0) + /* Cache Line Size 128 bytes */ + #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_CACHE_LINESIZE_SIZE_128 \ + UINT32_C(0x1) + #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_CACHE_LINESIZE_LAST \ + HWRM_FUNC_QCFG_OUTPUT_OPTIONS_CACHE_LINESIZE_SIZE_128 + /* This value is the virtual link admin state setting. */ + #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_LINK_ADMIN_STATE_MASK \ + UINT32_C(0xc) + #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_LINK_ADMIN_STATE_SFT 2 + /* Admin link state is in forced down mode. */ + #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_LINK_ADMIN_STATE_FORCED_DOWN \ + (UINT32_C(0x0) << 2) + /* Admin link state is in forced up mode. */ + #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_LINK_ADMIN_STATE_FORCED_UP \ + (UINT32_C(0x1) << 2) + /* Admin link state is in auto mode - follows the physical link state. */ + #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_LINK_ADMIN_STATE_AUTO \ + (UINT32_C(0x2) << 2) + #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_LINK_ADMIN_STATE_LAST \ + HWRM_FUNC_QCFG_OUTPUT_OPTIONS_LINK_ADMIN_STATE_AUTO + /* Reserved for future. */ + #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_RSVD_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_RSVD_SFT 4 /* - * This bit must be '1' for the tqm_ring5 fields to be - * configured. + * The number of VFs that are allocated to the function. + * This is valid only on the PF with SR-IOV enabled. + * 0xFF... (All Fs) if this command is called on a PF with + * SR-IOV disabled or on a VF. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING5 \ - UINT32_C(0x800) + uint16_t alloc_vfs; /* - * This bit must be '1' for the tqm_ring6 fields to be - * configured. + * The number of allocated multicast filters for this + * function on the RX side. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING6 \ - UINT32_C(0x1000) + uint32_t alloc_mcast_filters; /* - * This bit must be '1' for the tqm_ring7 fields to be - * configured. + * The number of allocated HW ring groups for this + * function. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING7 \ - UINT32_C(0x2000) + uint32_t alloc_hw_ring_grps; /* - * This bit must be '1' for the mrav fields to be - * configured. + * The number of strict priority transmit rings out of + * currently allocated TX rings to the function + * (alloc_tx_rings). */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_MRAV \ - UINT32_C(0x4000) + uint16_t alloc_sp_tx_rings; /* - * This bit must be '1' for the tim fields to be + * The number of statistics contexts + * currently reserved for the function. + */ + uint16_t alloc_stat_ctx; + /* + * This field specifies how many NQs are reserved for the PF. + * Remaining NQs that belong to the PF are available for VFs. + * Once a PF has created VFs, it cannot change how many NQs are + * reserved for itself (since the NQs must be contiguous in HW). + */ + uint16_t alloc_msix; + /* + * The number of registered VF’s associated with the PF. This field + * should be ignored when the request received on the VF interface. + * This field will be updated on the PF interface to initiate + * the unregister request on PF in the HOT Reset Process. + */ + uint16_t registered_vfs; + /* + * The size of the doorbell BAR in KBytes reserved for L2 including + * any area that is shared between L2 and RoCE. The L2 driver + * should only map the L2 portion of the doorbell BAR. Any rounding + * of the BAR size to the native CPU page size should be performed + * by the driver. If the value is zero, no special partitioning + * of the doorbell BAR between L2 and RoCE is required. + */ + uint16_t l2_doorbell_bar_size_kb; + uint8_t unused_1; + /* + * For backward compatibility this field must be set to 1. + * Older drivers might look for this field to be 1 before + * processing the message. + */ + uint8_t always_1; + /* + * This GRC address location is used by the Host driver interfaces to poll + * the adapter ready state to re-initiate the registration process again + * after receiving the RESET Notify event. + */ + uint32_t reset_addr_poll; + /* + * This field specifies legacy L2 doorbell size in KBytes. Drivers should use + * this value to find out the doorbell page offset from the BAR. + */ + uint16_t legacy_l2_db_size_kb; + uint16_t svif_info; + /* + * This field specifies the source virtual interface of the function being + * queried. Drivers can use this to program svif field in the L2 context + * table + */ + #define HWRM_FUNC_QCFG_OUTPUT_SVIF_INFO_SVIF_MASK UINT32_C(0x7fff) + #define HWRM_FUNC_QCFG_OUTPUT_SVIF_INFO_SVIF_SFT 0 + /* This field specifies whether svif is valid or not */ + #define HWRM_FUNC_QCFG_OUTPUT_SVIF_INFO_SVIF_VALID UINT32_C(0x8000) + uint8_t unused_2[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/***************** + * hwrm_func_cfg * + *****************/ + + +/* hwrm_func_cfg_input (size:768b/96B) */ +struct hwrm_func_cfg_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* + * Function ID of the function that is being * configured. + * If set to 0xFF... (All Fs), then the the configuration is + * for the requesting function. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TIM \ - UINT32_C(0x8000) - /* QPC page size and level. */ - uint8_t qpc_pg_size_qpc_lvl; - /* QPC PBL indirect levels. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_MASK \ - UINT32_C(0xf) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_SFT 0 - /* PBL pointer is physical start address. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_LVL_0 \ - UINT32_C(0x0) - /* PBL pointer points to PTE table. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_LVL_1 \ - UINT32_C(0x1) - /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_LVL_2 \ - UINT32_C(0x2) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_LAST \ - HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_LVL_2 - /* QPC page size. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_MASK \ - UINT32_C(0xf0) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_SFT 4 - /* 4KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_4K \ - (UINT32_C(0x0) << 4) - /* 8KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_8K \ - (UINT32_C(0x1) << 4) - /* 64KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_64K \ - (UINT32_C(0x2) << 4) - /* 2MB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_2M \ - (UINT32_C(0x3) << 4) - /* 8MB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_8M \ - (UINT32_C(0x4) << 4) - /* 1GB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_1G \ - (UINT32_C(0x5) << 4) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_LAST \ - HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_1G - /* SRQ page size and level. */ - uint8_t srq_pg_size_srq_lvl; - /* SRQ PBL indirect levels. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_MASK \ - UINT32_C(0xf) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_SFT 0 - /* PBL pointer is physical start address. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_LVL_0 \ - UINT32_C(0x0) - /* PBL pointer points to PTE table. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_LVL_1 \ - UINT32_C(0x1) - /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_LVL_2 \ - UINT32_C(0x2) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_LAST \ - HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_LVL_2 - /* SRQ page size. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_MASK \ - UINT32_C(0xf0) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_SFT 4 - /* 4KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_4K \ - (UINT32_C(0x0) << 4) - /* 8KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_8K \ - (UINT32_C(0x1) << 4) - /* 64KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_64K \ - (UINT32_C(0x2) << 4) - /* 2MB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_2M \ - (UINT32_C(0x3) << 4) - /* 8MB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_8M \ - (UINT32_C(0x4) << 4) - /* 1GB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_1G \ - (UINT32_C(0x5) << 4) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_LAST \ - HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_1G - /* CQ page size and level. */ - uint8_t cq_pg_size_cq_lvl; - /* CQ PBL indirect levels. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_MASK \ - UINT32_C(0xf) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_SFT 0 - /* PBL pointer is physical start address. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_LVL_0 \ - UINT32_C(0x0) - /* PBL pointer points to PTE table. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_LVL_1 \ - UINT32_C(0x1) - /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_LVL_2 \ - UINT32_C(0x2) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_LAST \ - HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_LVL_2 - /* CQ page size. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_MASK \ - UINT32_C(0xf0) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_SFT 4 - /* 4KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_4K \ - (UINT32_C(0x0) << 4) - /* 8KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_8K \ - (UINT32_C(0x1) << 4) - /* 64KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_64K \ - (UINT32_C(0x2) << 4) - /* 2MB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_2M \ - (UINT32_C(0x3) << 4) - /* 8MB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_8M \ - (UINT32_C(0x4) << 4) - /* 1GB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_1G \ - (UINT32_C(0x5) << 4) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_LAST \ - HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_1G - /* VNIC page size and level. */ - uint8_t vnic_pg_size_vnic_lvl; - /* VNIC PBL indirect levels. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_MASK \ - UINT32_C(0xf) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_SFT 0 - /* PBL pointer is physical start address. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_LVL_0 \ - UINT32_C(0x0) - /* PBL pointer points to PTE table. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_LVL_1 \ + uint16_t fid; + /* + * This field specifies how many NQs will be reserved for the PF. + * Remaining NQs that belong to the PF become available for VFs. + * Once a PF has created VFs, it cannot change how many NQs are + * reserved for itself (since the NQs must be contiguous in HW). + */ + uint16_t num_msix; + uint32_t flags; + /* + * When this bit is '1', the function is disabled with + * source MAC address check. + * This is an anti-spoofing check. If this flag is set, + * then the function shall be configured to disallow + * transmission of frames with the source MAC address that + * is configured for this function. + */ + #define HWRM_FUNC_CFG_INPUT_FLAGS_SRC_MAC_ADDR_CHECK_DISABLE \ UINT32_C(0x1) - /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_LVL_2 \ + /* + * When this bit is '1', the function is enabled with + * source MAC address check. + * This is an anti-spoofing check. If this flag is set, + * then the function shall be configured to allow + * transmission of frames with the source MAC address that + * is configured for this function. + */ + #define HWRM_FUNC_CFG_INPUT_FLAGS_SRC_MAC_ADDR_CHECK_ENABLE \ UINT32_C(0x2) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_LAST \ - HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_LVL_2 - /* VNIC page size. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_MASK \ - UINT32_C(0xf0) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_SFT 4 - /* 4KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_4K \ - (UINT32_C(0x0) << 4) - /* 8KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_8K \ - (UINT32_C(0x1) << 4) - /* 64KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_64K \ - (UINT32_C(0x2) << 4) - /* 2MB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_2M \ - (UINT32_C(0x3) << 4) - /* 8MB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_8M \ - (UINT32_C(0x4) << 4) - /* 1GB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_1G \ - (UINT32_C(0x5) << 4) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_LAST \ - HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_1G - /* Stat page size and level. */ - uint8_t stat_pg_size_stat_lvl; - /* Stat PBL indirect levels. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_MASK \ - UINT32_C(0xf) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_SFT 0 - /* PBL pointer is physical start address. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_LVL_0 \ - UINT32_C(0x0) - /* PBL pointer points to PTE table. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_LVL_1 \ - UINT32_C(0x1) - /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_LVL_2 \ - UINT32_C(0x2) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_LAST \ - HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_LVL_2 - /* Stat page size. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_MASK \ - UINT32_C(0xf0) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_SFT 4 - /* 4KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_4K \ - (UINT32_C(0x0) << 4) - /* 8KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_8K \ - (UINT32_C(0x1) << 4) - /* 64KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_64K \ - (UINT32_C(0x2) << 4) - /* 2MB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_2M \ - (UINT32_C(0x3) << 4) - /* 8MB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_8M \ - (UINT32_C(0x4) << 4) - /* 1GB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_1G \ - (UINT32_C(0x5) << 4) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_LAST \ - HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_1G - /* TQM slow path page size and level. */ - uint8_t tqm_sp_pg_size_tqm_sp_lvl; - /* TQM slow path PBL indirect levels. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_MASK \ - UINT32_C(0xf) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_SFT 0 - /* PBL pointer is physical start address. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_LVL_0 \ - UINT32_C(0x0) - /* PBL pointer points to PTE table. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_LVL_1 \ + /* reserved. */ + #define HWRM_FUNC_CFG_INPUT_FLAGS_RSVD_MASK \ + UINT32_C(0x1fc) + #define HWRM_FUNC_CFG_INPUT_FLAGS_RSVD_SFT 2 + /* + * Standard TX Ring mode is used for the allocation of TX ring + * and underlying scheduling resources that allow bandwidth + * reservation and limit settings on the queried function. + * If set to 1, then standard TX ring mode is requested to be + * enabled on the function being configured. + */ + #define HWRM_FUNC_CFG_INPUT_FLAGS_STD_TX_RING_MODE_ENABLE \ + UINT32_C(0x200) + /* + * Standard TX Ring mode is used for the allocation of TX ring + * and underlying scheduling resources that allow bandwidth + * reservation and limit settings on the queried function. + * If set to 1, then the standard TX ring mode is requested to + * be disabled on the function being configured. In this extended + * TX ring resource mode, the minimum and maximum bandwidth settings + * are not supported to allow the allocation of TX rings to + * span multiple scheduler nodes. + */ + #define HWRM_FUNC_CFG_INPUT_FLAGS_STD_TX_RING_MODE_DISABLE \ + UINT32_C(0x400) + /* + * If this bit is set, virtual mac address configured + * in this command will be persistent over warm boot. + */ + #define HWRM_FUNC_CFG_INPUT_FLAGS_VIRT_MAC_PERSIST \ + UINT32_C(0x800) + /* + * This bit only applies to the VF. If this bit is set, the statistic + * context counters will not be cleared when the statistic context is freed + * or a function reset is called on VF. This bit will be cleared when the PF + * is unloaded or a function reset is called on the PF. + */ + #define HWRM_FUNC_CFG_INPUT_FLAGS_NO_AUTOCLEAR_STATISTIC \ + UINT32_C(0x1000) + /* + * This bit requests that the firmware test to see if all the assets + * requested in this command (i.e. number of TX rings) are available. + * The firmware will return an error if the requested assets are + * not available. The firwmare will NOT reserve the assets if they + * are available. + */ + #define HWRM_FUNC_CFG_INPUT_FLAGS_TX_ASSETS_TEST \ + UINT32_C(0x2000) + /* + * This bit requests that the firmware test to see if all the assets + * requested in this command (i.e. number of RX rings) are available. + * The firmware will return an error if the requested assets are + * not available. The firwmare will NOT reserve the assets if they + * are available. + */ + #define HWRM_FUNC_CFG_INPUT_FLAGS_RX_ASSETS_TEST \ + UINT32_C(0x4000) + /* + * This bit requests that the firmware test to see if all the assets + * requested in this command (i.e. number of CMPL rings) are available. + * The firmware will return an error if the requested assets are + * not available. The firwmare will NOT reserve the assets if they + * are available. + */ + #define HWRM_FUNC_CFG_INPUT_FLAGS_CMPL_ASSETS_TEST \ + UINT32_C(0x8000) + /* + * This bit requests that the firmware test to see if all the assets + * requested in this command (i.e. number of RSS ctx) are available. + * The firmware will return an error if the requested assets are + * not available. The firwmare will NOT reserve the assets if they + * are available. + */ + #define HWRM_FUNC_CFG_INPUT_FLAGS_RSSCOS_CTX_ASSETS_TEST \ + UINT32_C(0x10000) + /* + * This bit requests that the firmware test to see if all the assets + * requested in this command (i.e. number of ring groups) are available. + * The firmware will return an error if the requested assets are + * not available. The firwmare will NOT reserve the assets if they + * are available. + */ + #define HWRM_FUNC_CFG_INPUT_FLAGS_RING_GRP_ASSETS_TEST \ + UINT32_C(0x20000) + /* + * This bit requests that the firmware test to see if all the assets + * requested in this command (i.e. number of stat ctx) are available. + * The firmware will return an error if the requested assets are + * not available. The firwmare will NOT reserve the assets if they + * are available. + */ + #define HWRM_FUNC_CFG_INPUT_FLAGS_STAT_CTX_ASSETS_TEST \ + UINT32_C(0x40000) + /* + * This bit requests that the firmware test to see if all the assets + * requested in this command (i.e. number of VNICs) are available. + * The firmware will return an error if the requested assets are + * not available. The firwmare will NOT reserve the assets if they + * are available. + */ + #define HWRM_FUNC_CFG_INPUT_FLAGS_VNIC_ASSETS_TEST \ + UINT32_C(0x80000) + /* + * This bit requests that the firmware test to see if all the assets + * requested in this command (i.e. number of L2 ctx) are available. + * The firmware will return an error if the requested assets are + * not available. The firwmare will NOT reserve the assets if they + * are available. + */ + #define HWRM_FUNC_CFG_INPUT_FLAGS_L2_CTX_ASSETS_TEST \ + UINT32_C(0x100000) + /* + * This configuration change can be initiated by a PF driver. This + * configuration request shall be targeted to a VF. From local host + * resident HWRM clients, only the parent PF driver shall be allowed + * to initiate this change on one of its children VFs. If this bit is + * set to 1, then the VF that is being configured is requested to be + * trusted. + */ + #define HWRM_FUNC_CFG_INPUT_FLAGS_TRUSTED_VF_ENABLE \ + UINT32_C(0x200000) + /* + * When this bit it set, even if PF reserved pool size is zero, + * FW will allow driver to create TX rings in ring alloc, + * by reserving TX ring, S3 node dynamically. + */ + #define HWRM_FUNC_CFG_INPUT_FLAGS_DYNAMIC_TX_RING_ALLOC \ + UINT32_C(0x400000) + /* + * This bit requests that the firmware test to see if all the assets + * requested in this command (i.e. number of NQ rings) are available. + * The firmware will return an error if the requested assets are + * not available. The firwmare will NOT reserve the assets if they + * are available. + */ + #define HWRM_FUNC_CFG_INPUT_FLAGS_NQ_ASSETS_TEST \ + UINT32_C(0x800000) + /* + * This configuration change can be initiated by a PF driver. This + * configuration request shall be targeted to a VF. From local host + * resident HWRM clients, only the parent PF driver shall be allowed + * to initiate this change on one of its children VFs. If this bit is + * set to 1, then the VF that is being configured is requested to be + * untrusted. + */ + #define HWRM_FUNC_CFG_INPUT_FLAGS_TRUSTED_VF_DISABLE \ + UINT32_C(0x1000000) + /* + * This bit is used by preboot drivers on a PF that require access + * to the legacy L2 ring model and legacy 32b doorbells. This + * feature is not allowed on VFs and is only relevant for devices + * that require a context backing store. + */ + #define HWRM_FUNC_CFG_INPUT_FLAGS_PREBOOT_LEGACY_L2_RINGS \ + UINT32_C(0x2000000) + /* + * If this bit is set to 0, then the interface does not support hot + * reset capability which it advertised with the hot_reset_support + * flag in HWRM_FUNC_DRV_RGTR. If any of the function has set this + * flag to 0, adapter cannot do the hot reset. In this state, if the + * firmware receives a hot reset request, firmware must fail the + * request. If this bit is set to 1, then interface is renabling the + * hot reset capability. + */ + #define HWRM_FUNC_CFG_INPUT_FLAGS_HOT_RESET_IF_EN_DIS \ + UINT32_C(0x4000000) + /* + * If this bit is set to 1, the PF driver is requesting FW + * to enable PPP TX PUSH feature on all the TX rings specified in + * the num_tx_rings field. By default, the PPP TX push feature is + * disabled for all the TX rings of the function. This flag is + * ignored if num_tx_rings field is not specified or the function + * doesn't support PPP tx push feature. + */ + #define HWRM_FUNC_CFG_INPUT_FLAGS_PPP_PUSH_MODE_ENABLE \ + UINT32_C(0x8000000) + uint32_t enables; + /* + * This bit must be '1' for the mtu field to be + * configured. + */ + #define HWRM_FUNC_CFG_INPUT_ENABLES_MTU \ UINT32_C(0x1) - /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_LVL_2 \ + /* + * This bit must be '1' for the mru field to be + * configured. + */ + #define HWRM_FUNC_CFG_INPUT_ENABLES_MRU \ UINT32_C(0x2) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_LAST \ - HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_LVL_2 - /* TQM slow path page size. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_MASK \ - UINT32_C(0xf0) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_SFT 4 - /* 4KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_4K \ - (UINT32_C(0x0) << 4) - /* 8KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_8K \ - (UINT32_C(0x1) << 4) - /* 64KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_64K \ - (UINT32_C(0x2) << 4) - /* 2MB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_2M \ - (UINT32_C(0x3) << 4) - /* 8MB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_8M \ - (UINT32_C(0x4) << 4) - /* 1GB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_1G \ - (UINT32_C(0x5) << 4) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_LAST \ - HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_1G - /* TQM ring 0 page size and level. */ - uint8_t tqm_ring0_pg_size_tqm_ring0_lvl; - /* TQM ring 0 PBL indirect levels. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_MASK \ - UINT32_C(0xf) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_SFT 0 - /* PBL pointer is physical start address. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_LVL_0 \ + /* + * This bit must be '1' for the num_rsscos_ctxs field to be + * configured. + */ + #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_RSSCOS_CTXS \ + UINT32_C(0x4) + /* + * This bit must be '1' for the num_cmpl_rings field to be + * configured. + */ + #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_CMPL_RINGS \ + UINT32_C(0x8) + /* + * This bit must be '1' for the num_tx_rings field to be + * configured. + */ + #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_TX_RINGS \ + UINT32_C(0x10) + /* + * This bit must be '1' for the num_rx_rings field to be + * configured. + */ + #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_RX_RINGS \ + UINT32_C(0x20) + /* + * This bit must be '1' for the num_l2_ctxs field to be + * configured. + */ + #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_L2_CTXS \ + UINT32_C(0x40) + /* + * This bit must be '1' for the num_vnics field to be + * configured. + */ + #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_VNICS \ + UINT32_C(0x80) + /* + * This bit must be '1' for the num_stat_ctxs field to be + * configured. + */ + #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_STAT_CTXS \ + UINT32_C(0x100) + /* + * This bit must be '1' for the dflt_mac_addr field to be + * configured. + */ + #define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_MAC_ADDR \ + UINT32_C(0x200) + /* + * This bit must be '1' for the dflt_vlan field to be + * configured. + */ + #define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_VLAN \ + UINT32_C(0x400) + /* + * This bit must be '1' for the dflt_ip_addr field to be + * configured. + */ + #define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_IP_ADDR \ + UINT32_C(0x800) + /* + * This bit must be '1' for the min_bw field to be + * configured. + */ + #define HWRM_FUNC_CFG_INPUT_ENABLES_MIN_BW \ + UINT32_C(0x1000) + /* + * This bit must be '1' for the max_bw field to be + * configured. + */ + #define HWRM_FUNC_CFG_INPUT_ENABLES_MAX_BW \ + UINT32_C(0x2000) + /* + * This bit must be '1' for the async_event_cr field to be + * configured. + */ + #define HWRM_FUNC_CFG_INPUT_ENABLES_ASYNC_EVENT_CR \ + UINT32_C(0x4000) + /* + * This bit must be '1' for the vlan_antispoof_mode field to be + * configured. + */ + #define HWRM_FUNC_CFG_INPUT_ENABLES_VLAN_ANTISPOOF_MODE \ + UINT32_C(0x8000) + /* + * This bit must be '1' for the allowed_vlan_pris field to be + * configured. + */ + #define HWRM_FUNC_CFG_INPUT_ENABLES_ALLOWED_VLAN_PRIS \ + UINT32_C(0x10000) + /* + * This bit must be '1' for the evb_mode field to be + * configured. + */ + #define HWRM_FUNC_CFG_INPUT_ENABLES_EVB_MODE \ + UINT32_C(0x20000) + /* + * This bit must be '1' for the num_mcast_filters field to be + * configured. + */ + #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_MCAST_FILTERS \ + UINT32_C(0x40000) + /* + * This bit must be '1' for the num_hw_ring_grps field to be + * configured. + */ + #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_HW_RING_GRPS \ + UINT32_C(0x80000) + /* + * This bit must be '1' for the cache_linesize field to be + * configured. + */ + #define HWRM_FUNC_CFG_INPUT_ENABLES_CACHE_LINESIZE \ + UINT32_C(0x100000) + /* + * This bit must be '1' for the num_msix field to be + * configured. + */ + #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_MSIX \ + UINT32_C(0x200000) + /* + * This bit must be '1' for the link admin state field to be + * configured. + */ + #define HWRM_FUNC_CFG_INPUT_ENABLES_ADMIN_LINK_STATE \ + UINT32_C(0x400000) + /* + * This bit must be '1' for the hot_reset_if_en_dis field to be + * configured. + */ + #define HWRM_FUNC_CFG_INPUT_ENABLES_HOT_RESET_IF_SUPPORT \ + UINT32_C(0x800000) + /* + * This bit must be '1' for the sq_id field to be + * configured. + */ + #define HWRM_FUNC_CFG_INPUT_ENABLES_SQ_ID \ + UINT32_C(0x1000000) + /* + * The maximum transmission unit of the function. + * The HWRM should make sure that the mtu of + * the function does not exceed the mtu of the physical + * port that this function is associated with. + * + * In addition to configuring mtu per function, it is + * possible to configure mtu per transmit ring. + * By default, the mtu of each transmit ring associated + * with a function is equal to the mtu of the function. + * The HWRM should make sure that the mtu of each transmit + * ring that is assigned to a function has a valid mtu. + */ + uint16_t mtu; + /* + * The maximum receive unit of the function. + * The HWRM should make sure that the mru of + * the function does not exceed the mru of the physical + * port that this function is associated with. + * + * In addition to configuring mru per function, it is + * possible to configure mru per vnic. + * By default, the mru of each vnic associated + * with a function is equal to the mru of the function. + * The HWRM should make sure that the mru of each vnic + * that is assigned to a function has a valid mru. + */ + uint16_t mru; + /* + * The number of RSS/COS contexts requested for the + * function. + */ + uint16_t num_rsscos_ctxs; + /* + * The number of completion rings requested for the + * function. This does not include the rings allocated + * to any children functions if any. + */ + uint16_t num_cmpl_rings; + /* + * The number of transmit rings requested for the function. + * This does not include the rings allocated to any + * children functions if any. + */ + uint16_t num_tx_rings; + /* + * The number of receive rings requested for the function. + * This does not include the rings allocated + * to any children functions if any. + */ + uint16_t num_rx_rings; + /* The requested number of L2 contexts for the function. */ + uint16_t num_l2_ctxs; + /* The requested number of vnics for the function. */ + uint16_t num_vnics; + /* The requested number of statistic contexts for the function. */ + uint16_t num_stat_ctxs; + /* + * The number of HW ring groups that should + * be reserved for this function. + */ + uint16_t num_hw_ring_grps; + /* The default MAC address for the function being configured. */ + uint8_t dflt_mac_addr[6]; + /* + * The default VLAN for the function being configured. + * This field's format is same as 802.1Q Tag's + * Tag Control Information (TCI) format that includes both + * Priority Code Point (PCP) and VLAN Identifier (VID). + */ + uint16_t dflt_vlan; + /* + * The default IP address for the function being configured. + * This address is only used in enabling source property check. + */ + uint32_t dflt_ip_addr[4]; + /* + * Minimum BW allocated for this function. + * The HWRM will translate this value into byte counter and + * time interval used for the scheduler inside the device. + */ + uint32_t min_bw; + /* The bandwidth value. */ + #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_SFT 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_LAST \ + HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_SFT 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_LAST \ + HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_INVALID + /* + * Maximum BW allocated for this function. + * The HWRM will translate this value into byte counter and + * time interval used for the scheduler inside the device. + */ + uint32_t max_bw; + /* The bandwidth value. */ + #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_SFT 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_LAST \ + HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_SFT 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_LAST \ + HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID + /* + * ID of the target completion ring for receiving asynchronous + * event completions. If this field is not valid, then the + * HWRM shall use the default completion ring of the function + * that is being configured as the target completion ring for + * providing any asynchronous event completions for that + * function. + * If this field is valid, then the HWRM shall use the + * completion ring identified by this ID as the target + * completion ring for providing any asynchronous event + * completions for the function that is being configured. + */ + uint16_t async_event_cr; + /* VLAN Anti-spoofing mode. */ + uint8_t vlan_antispoof_mode; + /* No VLAN anti-spoofing checks are enabled */ + #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_NOCHECK \ + UINT32_C(0x0) + /* Validate VLAN against the configured VLAN(s) */ + #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_VALIDATE_VLAN \ + UINT32_C(0x1) + /* Insert VLAN if it does not exist, otherwise discard */ + #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_INSERT_IF_VLANDNE \ + UINT32_C(0x2) + /* Insert VLAN if it does not exist, override VLAN if it exists */ + #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_INSERT_OR_OVERRIDE_VLAN \ + UINT32_C(0x3) + #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_LAST \ + HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_INSERT_OR_OVERRIDE_VLAN + /* + * This bit field defines VLAN PRIs that are allowed on + * this function. + * If nth bit is set, then VLAN PRI n is allowed on this + * function. + */ + uint8_t allowed_vlan_pris; + /* + * The HWRM shall allow a PF driver to change EVB mode for the + * partition it belongs to. + * The HWRM shall not allow a VF driver to change the EVB mode. + * The HWRM shall take into account the switching of EVB mode + * from one to another and reconfigure hardware resources as + * appropriately. + * The switching from VEB to VEPA mode requires + * the disabling of the loopback traffic. Additionally, + * source knock outs are handled differently in VEB and VEPA + * modes. + */ + uint8_t evb_mode; + /* No Edge Virtual Bridging (EVB) */ + #define HWRM_FUNC_CFG_INPUT_EVB_MODE_NO_EVB UINT32_C(0x0) + /* Virtual Ethernet Bridge (VEB) */ + #define HWRM_FUNC_CFG_INPUT_EVB_MODE_VEB UINT32_C(0x1) + /* Virtual Ethernet Port Aggregator (VEPA) */ + #define HWRM_FUNC_CFG_INPUT_EVB_MODE_VEPA UINT32_C(0x2) + #define HWRM_FUNC_CFG_INPUT_EVB_MODE_LAST \ + HWRM_FUNC_CFG_INPUT_EVB_MODE_VEPA + uint8_t options; + /* + * This value indicates the PCIE device cache line size. + * The cache line size allows the DMA writes to terminate and + * start at the cache boundary. + */ + #define HWRM_FUNC_CFG_INPUT_OPTIONS_CACHE_LINESIZE_MASK \ + UINT32_C(0x3) + #define HWRM_FUNC_CFG_INPUT_OPTIONS_CACHE_LINESIZE_SFT 0 + /* Cache Line Size 64 bytes */ + #define HWRM_FUNC_CFG_INPUT_OPTIONS_CACHE_LINESIZE_SIZE_64 \ + UINT32_C(0x0) + /* Cache Line Size 128 bytes */ + #define HWRM_FUNC_CFG_INPUT_OPTIONS_CACHE_LINESIZE_SIZE_128 \ + UINT32_C(0x1) + #define HWRM_FUNC_CFG_INPUT_OPTIONS_CACHE_LINESIZE_LAST \ + HWRM_FUNC_CFG_INPUT_OPTIONS_CACHE_LINESIZE_SIZE_128 + /* This value is the virtual link admin state setting. */ + #define HWRM_FUNC_CFG_INPUT_OPTIONS_LINK_ADMIN_STATE_MASK \ + UINT32_C(0xc) + #define HWRM_FUNC_CFG_INPUT_OPTIONS_LINK_ADMIN_STATE_SFT 2 + /* Admin state is forced down. */ + #define HWRM_FUNC_CFG_INPUT_OPTIONS_LINK_ADMIN_STATE_FORCED_DOWN \ + (UINT32_C(0x0) << 2) + /* Admin state is forced up. */ + #define HWRM_FUNC_CFG_INPUT_OPTIONS_LINK_ADMIN_STATE_FORCED_UP \ + (UINT32_C(0x1) << 2) + /* Admin state is in auto mode - is to follow the physical link state. */ + #define HWRM_FUNC_CFG_INPUT_OPTIONS_LINK_ADMIN_STATE_AUTO \ + (UINT32_C(0x2) << 2) + #define HWRM_FUNC_CFG_INPUT_OPTIONS_LINK_ADMIN_STATE_LAST \ + HWRM_FUNC_CFG_INPUT_OPTIONS_LINK_ADMIN_STATE_AUTO + /* Reserved for future. */ + #define HWRM_FUNC_CFG_INPUT_OPTIONS_RSVD_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_CFG_INPUT_OPTIONS_RSVD_SFT 4 + /* + * The number of multicast filters that should + * be reserved for this function on the RX side. + */ + uint16_t num_mcast_filters; + /* Used by a PF driver to associate a SQ with a VF. */ + uint16_t sq_id; + uint8_t unused_0[6]; +} __rte_packed; + +/* hwrm_func_cfg_output (size:128b/16B) */ +struct hwrm_func_cfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/******************** + * hwrm_func_qstats * + ********************/ + + +/* hwrm_func_qstats_input (size:192b/24B) */ +struct hwrm_func_qstats_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* + * Function ID of the function that is being queried. + * 0xFF... (All Fs) if the query is for the requesting + * function. + * A privileged PF can query for other function's statistics. + */ + uint16_t fid; + /* This flags indicates the type of statistics request. */ + uint8_t flags; + /* This value is not used to avoid backward compatibility issues. */ + #define HWRM_FUNC_QSTATS_INPUT_FLAGS_UNUSED UINT32_C(0x0) + /* + * flags should be set to 1 when request is for only RoCE statistics. + * This will be honored only if the caller_fid is a privileged PF. + * In all other cases FID and caller_fid should be the same. + */ + #define HWRM_FUNC_QSTATS_INPUT_FLAGS_ROCE_ONLY UINT32_C(0x1) + /* + * flags should be set to 2 when request is for the counter mask, + * representing the width of each of the stats counters, rather + * than counters themselves. + */ + #define HWRM_FUNC_QSTATS_INPUT_FLAGS_COUNTER_MASK UINT32_C(0x2) + #define HWRM_FUNC_QSTATS_INPUT_FLAGS_LAST \ + HWRM_FUNC_QSTATS_INPUT_FLAGS_COUNTER_MASK + uint8_t unused_0[5]; +} __rte_packed; + +/* hwrm_func_qstats_output (size:1408b/176B) */ +struct hwrm_func_qstats_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* Number of transmitted unicast packets on the function. */ + uint64_t tx_ucast_pkts; + /* Number of transmitted multicast packets on the function. */ + uint64_t tx_mcast_pkts; + /* Number of transmitted broadcast packets on the function. */ + uint64_t tx_bcast_pkts; + /* + * Number of transmitted packets that were discarded due to + * internal NIC resource problems. For transmit, this + * can only happen if TMP is configured to allow dropping + * in HOL blocking conditions, which is not a normal + * configuration. + */ + uint64_t tx_discard_pkts; + /* + * Number of dropped packets on transmit path on the function. + * These are packets that have been marked for drop by + * the TE CFA block or are packets that exceeded the + * transmit MTU limit for the function. + */ + uint64_t tx_drop_pkts; + /* Number of transmitted bytes for unicast traffic on the function. */ + uint64_t tx_ucast_bytes; + /* Number of transmitted bytes for multicast traffic on the function. */ + uint64_t tx_mcast_bytes; + /* Number of transmitted bytes for broadcast traffic on the function. */ + uint64_t tx_bcast_bytes; + /* Number of received unicast packets on the function. */ + uint64_t rx_ucast_pkts; + /* Number of received multicast packets on the function. */ + uint64_t rx_mcast_pkts; + /* Number of received broadcast packets on the function. */ + uint64_t rx_bcast_pkts; + /* + * Number of received packets that were discarded on the function + * due to resource limitations. This can happen for 3 reasons. + * # The BD used for the packet has a bad format. + * # There were no BDs available in the ring for the packet. + * # There were no BDs available on-chip for the packet. + */ + uint64_t rx_discard_pkts; + /* + * Number of dropped packets on received path on the function. + * These are packets that have been marked for drop by the + * RE CFA. + */ + uint64_t rx_drop_pkts; + /* Number of received bytes for unicast traffic on the function. */ + uint64_t rx_ucast_bytes; + /* Number of received bytes for multicast traffic on the function. */ + uint64_t rx_mcast_bytes; + /* Number of received bytes for broadcast traffic on the function. */ + uint64_t rx_bcast_bytes; + /* Number of aggregated unicast packets on the function. */ + uint64_t rx_agg_pkts; + /* Number of aggregated unicast bytes on the function. */ + uint64_t rx_agg_bytes; + /* Number of aggregation events on the function. */ + uint64_t rx_agg_events; + /* Number of aborted aggregations on the function. */ + uint64_t rx_agg_aborts; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/************************ + * hwrm_func_qstats_ext * + ************************/ + + +/* hwrm_func_qstats_ext_input (size:256b/32B) */ +struct hwrm_func_qstats_ext_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* + * Function ID of the function that is being queried. + * 0xFF... (All Fs) if the query is for the requesting + * function. + * A privileged PF can query for other function's statistics. + */ + uint16_t fid; + /* This flags indicates the type of statistics request. */ + uint8_t flags; + /* This value is not used to avoid backward compatibility issues. */ + #define HWRM_FUNC_QSTATS_EXT_INPUT_FLAGS_UNUSED UINT32_C(0x0) + /* + * flags should be set to 1 when request is for only RoCE statistics. + * This will be honored only if the caller_fid is a privileged PF. + * In all other cases FID and caller_fid should be the same. + */ + #define HWRM_FUNC_QSTATS_EXT_INPUT_FLAGS_ROCE_ONLY UINT32_C(0x1) + /* + * flags should be set to 2 when request is for the counter mask + * representing the width of each of the stats counters, rather + * than counters themselves. + */ + #define HWRM_FUNC_QSTATS_EXT_INPUT_FLAGS_COUNTER_MASK UINT32_C(0x2) + #define HWRM_FUNC_QSTATS_EXT_INPUT_FLAGS_LAST \ + HWRM_FUNC_QSTATS_EXT_INPUT_FLAGS_COUNTER_MASK + uint8_t unused_0[1]; + uint32_t enables; + /* + * This bit must be '1' for the sq_id and traffic_class fields to be + * configured. + */ + #define HWRM_FUNC_QSTATS_EXT_INPUT_ENABLES_SQ_ID UINT32_C(0x1) + /* Specifies the SQ for which to gather statistics */ + uint16_t sq_id; + /* + * Specifies the traffic class for which to gather statistics. Valid + * values are 0 through (max_configurable_queues - 1), where + * max_configurable_queues is in the response of HWRM_QUEUE_QPORTCFG + */ + uint16_t traffic_class; + uint8_t unused_1[4]; +} __rte_packed; + +/* hwrm_func_qstats_ext_output (size:1472b/184B) */ +struct hwrm_func_qstats_ext_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* Number of received unicast packets */ + uint64_t rx_ucast_pkts; + /* Number of received multicast packets */ + uint64_t rx_mcast_pkts; + /* Number of received broadcast packets */ + uint64_t rx_bcast_pkts; + /* Number of discarded packets on received path */ + uint64_t rx_discard_pkts; + /* Number of packets on receive path with error */ + uint64_t rx_error_pkts; + /* Number of received bytes for unicast traffic */ + uint64_t rx_ucast_bytes; + /* Number of received bytes for multicast traffic */ + uint64_t rx_mcast_bytes; + /* Number of received bytes for broadcast traffic */ + uint64_t rx_bcast_bytes; + /* Number of transmitted unicast packets */ + uint64_t tx_ucast_pkts; + /* Number of transmitted multicast packets */ + uint64_t tx_mcast_pkts; + /* Number of transmitted broadcast packets */ + uint64_t tx_bcast_pkts; + /* Number of packets on transmit path with error */ + uint64_t tx_error_pkts; + /* Number of discarded packets on transmit path */ + uint64_t tx_discard_pkts; + /* Number of transmitted bytes for unicast traffic */ + uint64_t tx_ucast_bytes; + /* Number of transmitted bytes for multicast traffic */ + uint64_t tx_mcast_bytes; + /* Number of transmitted bytes for broadcast traffic */ + uint64_t tx_bcast_bytes; + /* Number of TPA eligible packets */ + uint64_t rx_tpa_eligible_pkt; + /* Number of TPA eligible bytes */ + uint64_t rx_tpa_eligible_bytes; + /* Number of TPA packets */ + uint64_t rx_tpa_pkt; + /* Number of TPA bytes */ + uint64_t rx_tpa_bytes; + /* Number of TPA errors */ + uint64_t rx_tpa_errors; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/*********************** + * hwrm_func_clr_stats * + ***********************/ + + +/* hwrm_func_clr_stats_input (size:192b/24B) */ +struct hwrm_func_clr_stats_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* + * Function ID of the function. + * 0xFF... (All Fs) if the query is for the requesting + * function. + */ + uint16_t fid; + uint8_t unused_0[6]; +} __rte_packed; + +/* hwrm_func_clr_stats_output (size:128b/16B) */ +struct hwrm_func_clr_stats_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/************************** + * hwrm_func_vf_resc_free * + **************************/ + + +/* hwrm_func_vf_resc_free_input (size:192b/24B) */ +struct hwrm_func_vf_resc_free_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* + * This value is used to identify a Virtual Function (VF). + * The scope of VF ID is local within a PF. + */ + uint16_t vf_id; + uint8_t unused_0[6]; +} __rte_packed; + +/* hwrm_func_vf_resc_free_output (size:128b/16B) */ +struct hwrm_func_vf_resc_free_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/********************** + * hwrm_func_drv_rgtr * + **********************/ + + +/* hwrm_func_drv_rgtr_input (size:896b/112B) */ +struct hwrm_func_drv_rgtr_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + uint32_t flags; + /* + * When this bit is '1', the function driver is requesting + * all requests from its children VF drivers to be + * forwarded to itself. + * This flag can only be set by the PF driver. + * If a VF driver sets this flag, it should be ignored + * by the HWRM. + */ + #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FWD_ALL_MODE \ + UINT32_C(0x1) + /* + * When this bit is '1', the function is requesting none of + * the requests from its children VF drivers to be + * forwarded to itself. + * This flag can only be set by the PF driver. + * If a VF driver sets this flag, it should be ignored + * by the HWRM. + */ + #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FWD_NONE_MODE \ + UINT32_C(0x2) + /* + * When this bit is '1', then ver_maj_8b, ver_min_8b, ver_upd_8b + * fields shall be ignored and ver_maj, ver_min, ver_upd + * and ver_patch shall be used for the driver version information. + * When this bit is '0', then ver_maj_8b, ver_min_8b, ver_upd_8b + * fields shall be used for the driver version information and + * ver_maj, ver_min, ver_upd and ver_patch shall be ignored. + */ + #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_16BIT_VER_MODE \ + UINT32_C(0x4) + /* + * When this bit is '1', the function is indicating support of + * 64bit flow handle. The firmware that only supports 64bit flow + * handle should check this bit before allowing processing of + * HWRM_CFA_FLOW_XXX commands from the requesting function as firmware + * with 64bit flow handle support can only be compatible with drivers + * that support 64bit flow handle. The legacy drivers that don't support + * 64bit flow handle won't be able to use HWRM_CFA_FLOW_XXX commands when + * running with new firmware that only supports 64bit flow handle. The new + * firmware support 64bit flow handle returns HWRM_ERR_CODE_CMD_NOT_SUPPORTED + * status to the legacy driver when encounters these commands. + */ + #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FLOW_HANDLE_64BIT_MODE \ + UINT32_C(0x8) + /* + * When this bit is '1', the function is indicating support of + * Hot Reset. The driver interface will destroy the resources, + * unregister the function and register again up on receiving + * the RESET_NOTIFY Async notification from the core firmware. + * The core firmware will this use flag and trigger the Hot Reset + * process only if all the registered driver instances are capable + * of this support. + */ + #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_HOT_RESET_SUPPORT \ + UINT32_C(0x10) + /* + * When this bit is 1, the function is indicating the support of the + * error recovery capability. Error recovery support will be used by + * firmware only if all the driver instances support error recovery + * process. By setting this bit, driver is indicating support for + * corresponding async event completion message. These will be + * delivered to the driver even if they did not register for it. + * If supported, after receiving reset notify async event with fatal + * flag set in event data1, then all the drivers have to tear down + * their resources without sending any HWRM commands to FW. + */ + #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_ERROR_RECOVERY_SUPPORT \ + UINT32_C(0x20) + /* + * When this bit is 1, the function is indicating the support of the + * Master capability. The Firmware will use this capability to select the + * Master function. The master function will be used to initiate + * designated functionality like error recovery etc… If none of the + * registered PF’s or trusted VF’s indicate this support, then + * firmware will select the 1st registered PF as Master capable instance. + */ + #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_MASTER_SUPPORT \ + UINT32_C(0x40) + uint32_t enables; + /* + * This bit must be '1' for the os_type field to be + * configured. + */ + #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_OS_TYPE \ + UINT32_C(0x1) + /* + * This bit must be '1' for the ver field to be + * configured. + */ + #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VER \ + UINT32_C(0x2) + /* + * This bit must be '1' for the timestamp field to be + * configured. + */ + #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_TIMESTAMP \ + UINT32_C(0x4) + /* + * This bit must be '1' for the vf_req_fwd field to be + * configured. + */ + #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VF_REQ_FWD \ + UINT32_C(0x8) + /* + * This bit must be '1' for the async_event_fwd field to be + * configured. + */ + #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_ASYNC_EVENT_FWD \ + UINT32_C(0x10) + /* This value indicates the type of OS. The values are based on CIM_OperatingSystem.mof file as published by the DMTF. */ + uint16_t os_type; + /* Unknown */ + #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_UNKNOWN UINT32_C(0x0) + /* Other OS not listed below. */ + #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_OTHER UINT32_C(0x1) + /* MSDOS OS. */ + #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_MSDOS UINT32_C(0xe) + /* Windows OS. */ + #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WINDOWS UINT32_C(0x12) + /* Solaris OS. */ + #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_SOLARIS UINT32_C(0x1d) + /* Linux OS. */ + #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_LINUX UINT32_C(0x24) + /* FreeBSD OS. */ + #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_FREEBSD UINT32_C(0x2a) + /* VMware ESXi OS. */ + #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_ESXI UINT32_C(0x68) + /* Microsoft Windows 8 64-bit OS. */ + #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WIN864 UINT32_C(0x73) + /* Microsoft Windows Server 2012 R2 OS. */ + #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WIN2012R2 UINT32_C(0x74) + /* UEFI driver. */ + #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_UEFI UINT32_C(0x8000) + #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_LAST \ + HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_UEFI + /* This is the 8bit major version of the driver. */ + uint8_t ver_maj_8b; + /* This is the 8bit minor version of the driver. */ + uint8_t ver_min_8b; + /* This is the 8bit update version of the driver. */ + uint8_t ver_upd_8b; + uint8_t unused_0[3]; + /* + * This is a 32-bit timestamp provided by the driver for + * keep alive. + * The timestamp is in multiples of 1ms. + */ + uint32_t timestamp; + uint8_t unused_1[4]; + /* + * This is a 256-bit bit mask provided by the PF driver for + * letting the HWRM know what commands issued by the VF driver + * to the HWRM should be forwarded to the PF driver. + * Nth bit refers to the Nth req_type. + * + * Setting Nth bit to 1 indicates that requests from the + * VF driver with req_type equal to N shall be forwarded to + * the parent PF driver. + * + * This field is not valid for the VF driver. + */ + uint32_t vf_req_fwd[8]; + /* + * This is a 256-bit bit mask provided by the function driver + * (PF or VF driver) to indicate the list of asynchronous event + * completions to be forwarded. + * + * Nth bit refers to the Nth event_id. + * + * Setting Nth bit to 1 by the function driver shall result in + * the HWRM forwarding asynchronous event completion with + * event_id equal to N. + * + * If all bits are set to 0 (value of 0), then the HWRM shall + * not forward any asynchronous event completion to this + * function driver. + */ + uint32_t async_event_fwd[8]; + /* This is the 16bit major version of the driver. */ + uint16_t ver_maj; + /* This is the 16bit minor version of the driver. */ + uint16_t ver_min; + /* This is the 16bit update version of the driver. */ + uint16_t ver_upd; + /* This is the 16bit patch version of the driver. */ + uint16_t ver_patch; +} __rte_packed; + +/* hwrm_func_drv_rgtr_output (size:128b/16B) */ +struct hwrm_func_drv_rgtr_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint32_t flags; + /* + * When this bit is '1', it indicates that the + * HWRM_FUNC_DRV_IF_CHANGE call is supported. + */ + #define HWRM_FUNC_DRV_RGTR_OUTPUT_FLAGS_IF_CHANGE_SUPPORTED \ + UINT32_C(0x1) + uint8_t unused_0[3]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/************************ + * hwrm_func_drv_unrgtr * + ************************/ + + +/* hwrm_func_drv_unrgtr_input (size:192b/24B) */ +struct hwrm_func_drv_unrgtr_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + uint32_t flags; + /* + * When this bit is '1', the function driver is notifying + * the HWRM to prepare for the shutdown. + */ + #define HWRM_FUNC_DRV_UNRGTR_INPUT_FLAGS_PREPARE_FOR_SHUTDOWN \ + UINT32_C(0x1) + uint8_t unused_0[4]; +} __rte_packed; + +/* hwrm_func_drv_unrgtr_output (size:128b/16B) */ +struct hwrm_func_drv_unrgtr_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/********************** + * hwrm_func_buf_rgtr * + **********************/ + + +/* hwrm_func_buf_rgtr_input (size:1024b/128B) */ +struct hwrm_func_buf_rgtr_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + uint32_t enables; + /* + * This bit must be '1' for the vf_id field to be + * configured. + */ + #define HWRM_FUNC_BUF_RGTR_INPUT_ENABLES_VF_ID UINT32_C(0x1) + /* + * This bit must be '1' for the err_buf_addr field to be + * configured. + */ + #define HWRM_FUNC_BUF_RGTR_INPUT_ENABLES_ERR_BUF_ADDR UINT32_C(0x2) + /* + * This value is used to identify a Virtual Function (VF). + * The scope of VF ID is local within a PF. + */ + uint16_t vf_id; + /* + * This field represents the number of pages used for request + * buffer(s). + */ + uint16_t req_buf_num_pages; + /* + * This field represents the page size used for request + * buffer(s). + */ + uint16_t req_buf_page_size; + /* 16 bytes */ + #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_16B UINT32_C(0x4) + /* 4 Kbytes */ + #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_4K UINT32_C(0xc) + /* 8 Kbytes */ + #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_8K UINT32_C(0xd) + /* 64 Kbytes */ + #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_64K UINT32_C(0x10) + /* 2 Mbytes */ + #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_2M UINT32_C(0x15) + /* 4 Mbytes */ + #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_4M UINT32_C(0x16) + /* 1 Gbytes */ + #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_1G UINT32_C(0x1e) + #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_LAST \ + HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_1G + /* The length of the request buffer per VF in bytes. */ + uint16_t req_buf_len; + /* The length of the response buffer in bytes. */ + uint16_t resp_buf_len; + uint8_t unused_0[2]; + /* This field represents the page address of page #0. */ + uint64_t req_buf_page_addr0; + /* This field represents the page address of page #1. */ + uint64_t req_buf_page_addr1; + /* This field represents the page address of page #2. */ + uint64_t req_buf_page_addr2; + /* This field represents the page address of page #3. */ + uint64_t req_buf_page_addr3; + /* This field represents the page address of page #4. */ + uint64_t req_buf_page_addr4; + /* This field represents the page address of page #5. */ + uint64_t req_buf_page_addr5; + /* This field represents the page address of page #6. */ + uint64_t req_buf_page_addr6; + /* This field represents the page address of page #7. */ + uint64_t req_buf_page_addr7; + /* This field represents the page address of page #8. */ + uint64_t req_buf_page_addr8; + /* This field represents the page address of page #9. */ + uint64_t req_buf_page_addr9; + /* + * This field is used to receive the error reporting from + * the chipset. Only applicable for PFs. + */ + uint64_t error_buf_addr; + /* + * This field is used to receive the response forwarded by the + * HWRM. + */ + uint64_t resp_buf_addr; +} __rte_packed; + +/* hwrm_func_buf_rgtr_output (size:128b/16B) */ +struct hwrm_func_buf_rgtr_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/************************ + * hwrm_func_buf_unrgtr * + ************************/ + + +/* hwrm_func_buf_unrgtr_input (size:192b/24B) */ +struct hwrm_func_buf_unrgtr_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + uint32_t enables; + /* + * This bit must be '1' for the vf_id field to be + * configured. + */ + #define HWRM_FUNC_BUF_UNRGTR_INPUT_ENABLES_VF_ID UINT32_C(0x1) + /* + * This value is used to identify a Virtual Function (VF). + * The scope of VF ID is local within a PF. + */ + uint16_t vf_id; + uint8_t unused_0[2]; +} __rte_packed; + +/* hwrm_func_buf_unrgtr_output (size:128b/16B) */ +struct hwrm_func_buf_unrgtr_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/********************** + * hwrm_func_drv_qver * + **********************/ + + +/* hwrm_func_drv_qver_input (size:192b/24B) */ +struct hwrm_func_drv_qver_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* Reserved for future use. */ + uint32_t reserved; + /* + * Function ID of the function that is being queried. + * 0xFF... (All Fs) if the query is for the requesting + * function. + */ + uint16_t fid; + uint8_t unused_0[2]; +} __rte_packed; + +/* hwrm_func_drv_qver_output (size:256b/32B) */ +struct hwrm_func_drv_qver_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* This value indicates the type of OS. The values are based on CIM_OperatingSystem.mof file as published by the DMTF. */ + uint16_t os_type; + /* Unknown */ + #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_UNKNOWN UINT32_C(0x0) + /* Other OS not listed below. */ + #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_OTHER UINT32_C(0x1) + /* MSDOS OS. */ + #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_MSDOS UINT32_C(0xe) + /* Windows OS. */ + #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_WINDOWS UINT32_C(0x12) + /* Solaris OS. */ + #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_SOLARIS UINT32_C(0x1d) + /* Linux OS. */ + #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_LINUX UINT32_C(0x24) + /* FreeBSD OS. */ + #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_FREEBSD UINT32_C(0x2a) + /* VMware ESXi OS. */ + #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_ESXI UINT32_C(0x68) + /* Microsoft Windows 8 64-bit OS. */ + #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_WIN864 UINT32_C(0x73) + /* Microsoft Windows Server 2012 R2 OS. */ + #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_WIN2012R2 UINT32_C(0x74) + /* UEFI driver. */ + #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_UEFI UINT32_C(0x8000) + #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_LAST \ + HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_UEFI + /* This is the 8bit major version of the driver. */ + uint8_t ver_maj_8b; + /* This is the 8bit minor version of the driver. */ + uint8_t ver_min_8b; + /* This is the 8bit update version of the driver. */ + uint8_t ver_upd_8b; + uint8_t unused_0[3]; + /* This is the 16bit major version of the driver. */ + uint16_t ver_maj; + /* This is the 16bit minor version of the driver. */ + uint16_t ver_min; + /* This is the 16bit update version of the driver. */ + uint16_t ver_upd; + /* This is the 16bit patch version of the driver. */ + uint16_t ver_patch; + uint8_t unused_1[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/**************************** + * hwrm_func_resource_qcaps * + ****************************/ + + +/* hwrm_func_resource_qcaps_input (size:192b/24B) */ +struct hwrm_func_resource_qcaps_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* + * Function ID of the function that is being queried. + * 0xFF... (All Fs) if the query is for the requesting + * function. + */ + uint16_t fid; + uint8_t unused_0[6]; +} __rte_packed; + +/* hwrm_func_resource_qcaps_output (size:448b/56B) */ +struct hwrm_func_resource_qcaps_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* Maximum guaranteed number of VFs supported by PF. Not applicable for VFs. */ + uint16_t max_vfs; + /* Maximum guaranteed number of MSI-X vectors supported by function */ + uint16_t max_msix; + /* Hint of strategy to be used by PF driver to reserve resources for its VF */ + uint16_t vf_reservation_strategy; + /* The PF driver should evenly divide its remaining resources among all VFs. */ + #define HWRM_FUNC_RESOURCE_QCAPS_OUTPUT_VF_RESERVATION_STRATEGY_MAXIMAL \ + UINT32_C(0x0) + /* The PF driver should only reserve minimal resources for each VF. */ + #define HWRM_FUNC_RESOURCE_QCAPS_OUTPUT_VF_RESERVATION_STRATEGY_MINIMAL \ + UINT32_C(0x1) + /* + * The PF driver should not reserve any resources for each VF until the + * the VF interface is brought up. + */ + #define HWRM_FUNC_RESOURCE_QCAPS_OUTPUT_VF_RESERVATION_STRATEGY_MINIMAL_STATIC \ + UINT32_C(0x2) + #define HWRM_FUNC_RESOURCE_QCAPS_OUTPUT_VF_RESERVATION_STRATEGY_LAST \ + HWRM_FUNC_RESOURCE_QCAPS_OUTPUT_VF_RESERVATION_STRATEGY_MINIMAL_STATIC + /* Minimum guaranteed number of RSS/COS contexts */ + uint16_t min_rsscos_ctx; + /* Maximum non-guaranteed number of RSS/COS contexts */ + uint16_t max_rsscos_ctx; + /* Minimum guaranteed number of completion rings */ + uint16_t min_cmpl_rings; + /* Maximum non-guaranteed number of completion rings */ + uint16_t max_cmpl_rings; + /* Minimum guaranteed number of transmit rings */ + uint16_t min_tx_rings; + /* Maximum non-guaranteed number of transmit rings */ + uint16_t max_tx_rings; + /* Minimum guaranteed number of receive rings */ + uint16_t min_rx_rings; + /* Maximum non-guaranteed number of receive rings */ + uint16_t max_rx_rings; + /* Minimum guaranteed number of L2 contexts */ + uint16_t min_l2_ctxs; + /* Maximum non-guaranteed number of L2 contexts */ + uint16_t max_l2_ctxs; + /* Minimum guaranteed number of VNICs */ + uint16_t min_vnics; + /* Maximum non-guaranteed number of VNICs */ + uint16_t max_vnics; + /* Minimum guaranteed number of statistic contexts */ + uint16_t min_stat_ctx; + /* Maximum non-guaranteed number of statistic contexts */ + uint16_t max_stat_ctx; + /* Minimum guaranteed number of ring groups */ + uint16_t min_hw_ring_grps; + /* Maximum non-guaranteed number of ring groups */ + uint16_t max_hw_ring_grps; + /* + * Maximum number of inputs into the transmit scheduler for this function. + * The number of TX rings assigned to the function cannot exceed this value. + */ + uint16_t max_tx_scheduler_inputs; + uint16_t flags; + /* + * When this bit is '1', it indicates that VF_RESOURCE_CFG supports + * feature to reserve all minimum resources when minimum >= 1, otherwise + * returns an error. + */ + #define HWRM_FUNC_RESOURCE_QCAPS_OUTPUT_FLAGS_MIN_GUARANTEED \ + UINT32_C(0x1) + uint8_t unused_0[5]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/********************************* + * hwrm_func_backing_store_qcaps * + *********************************/ + + +/* hwrm_func_backing_store_qcaps_input (size:128b/16B) */ +struct hwrm_func_backing_store_qcaps_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; +} __rte_packed; + +/* hwrm_func_backing_store_qcaps_output (size:640b/80B) */ +struct hwrm_func_backing_store_qcaps_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* Maximum number of QP context entries supported for this function. */ + uint32_t qp_max_entries; + /* + * Minimum number of QP context entries that are needed to be reserved + * for QP1 for the PF and its VFs. PF drivers must allocate at least + * this many QP context entries, even if RoCE will not be used. + */ + uint16_t qp_min_qp1_entries; + /* Maximum number of QP context entries that can be used for L2. */ + uint16_t qp_max_l2_entries; + /* Number of bytes that must be allocated for each context entry. */ + uint16_t qp_entry_size; + /* Maximum number of SRQ context entries that can be used for L2. */ + uint16_t srq_max_l2_entries; + /* Maximum number of SRQ context entries supported for this function. */ + uint32_t srq_max_entries; + /* Number of bytes that must be allocated for each context entry. */ + uint16_t srq_entry_size; + /* Maximum number of CQ context entries that can be used for L2. */ + uint16_t cq_max_l2_entries; + /* Maximum number of CQ context entries supported for this function. */ + uint32_t cq_max_entries; + /* Number of bytes that must be allocated for each context entry. */ + uint16_t cq_entry_size; + /* Maximum number of VNIC context entries supported for this function. */ + uint16_t vnic_max_vnic_entries; + /* Maximum number of Ring table context entries supported for this function. */ + uint16_t vnic_max_ring_table_entries; + /* Number of bytes that must be allocated for each context entry. */ + uint16_t vnic_entry_size; + /* Maximum number of statistic context entries supported for this function. */ + uint32_t stat_max_entries; + /* Number of bytes that must be allocated for each context entry. */ + uint16_t stat_entry_size; + /* Number of bytes that must be allocated for each context entry. */ + uint16_t tqm_entry_size; + /* Minimum number of TQM context entries required per ring. */ + uint32_t tqm_min_entries_per_ring; + /* + * Maximum number of TQM context entries supported per ring. This is + * actually a recommended TQM queue size based on worst case usage of + * the TQM queue. + * + * TQM fastpath rings should be sized large enough to accommodate the + * maximum number of QPs (either L2 or RoCE, or both if shared) + * that can be enqueued to the TQM ring. + * + * TQM slowpath rings should be sized as follows: + * + * num_entries = num_vnics + num_l2_tx_rings + 2 * num_roce_qps + tqm_min_size + * + * Where: + * num_vnics is the number of VNICs allocated in the VNIC backing store + * num_l2_tx_rings is the number of L2 rings in the QP backing store + * num_roce_qps is the number of RoCE QPs in the QP backing store + * tqm_min_size is tqm_min_entries_per_ring reported by + * HWRM_FUNC_BACKING_STORE_QCAPS + * + * Note that TQM ring sizes cannot be extended while the system is + * operational. If a PF driver needs to extend a TQM ring, it needs + * to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate + * the backing store. + */ + uint32_t tqm_max_entries_per_ring; + /* + * Maximum number of MR plus AV context entries supported for this + * function. + */ + uint32_t mrav_max_entries; + /* Number of bytes that must be allocated for each context entry. */ + uint16_t mrav_entry_size; + /* Number of bytes that must be allocated for each context entry. */ + uint16_t tim_entry_size; + /* Maximum number of Timer context entries supported for this function. */ + uint32_t tim_max_entries; + /* + * When this field is zero, the 32b `mrav_num_entries` field in the + * `backing_store_cfg` and `backing_store_qcfg` commands represents + * the total number of MR plus AV entries allowed in the MR/AV backing + * store PBL. + * + * When this field is non-zero, the 32b `mrav_num_entries` field in + * the `backing_store_cfg` and `backing_store_qcfg` commands is + * logically divided into two 16b fields. Bits `[31:16]` represents + * the `mr_num_entries` and bits `[15:0]` represents `av_num_entries`. + * Both of these values are represented in a unit granularity + * specified by this field. For example, if this field is 16 and + * `mrav_num_entries` is `0x02000100`, then the number of MR entries + * is 8192 and the number of AV entries is 4096. + */ + uint16_t mrav_num_entries_units; + /* + * The number of entries specified for any TQM ring must be a + * multiple of this value to prevent any resource allocation + * limitations. + */ + uint8_t tqm_entries_multiple; + /* + * Initializer to be used by drivers + * to initialize context memory to ensure + * context subsystem flags an error for an attack + * before the first time context load. + */ + uint8_t ctx_kind_initializer; + /* Reserved for future. */ + uint32_t rsvd; + /* Reserved for future. */ + uint16_t rsvd1; + /* + * Count of TQM fastpath rings to be used for allocating backing store. + * Backing store configuration must be specified for each TQM ring from + * this count in `backing_store_cfg`. + */ + uint8_t tqm_fp_rings_count; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/******************************* + * hwrm_func_backing_store_cfg * + *******************************/ + + +/* hwrm_func_backing_store_cfg_input (size:2048b/256B) */ +struct hwrm_func_backing_store_cfg_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + uint32_t flags; + /* + * When set, the firmware only uses on-chip resources and does not + * expect any backing store to be provided by the host driver. This + * mode provides minimal L2 functionality (e.g. limited L2 resources, + * no RoCE). + */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_FLAGS_PREBOOT_MODE \ + UINT32_C(0x1) + /* + * When set, the 32b `mrav_num_entries` field is logically divided + * into two 16b fields, `mr_num_entries` and `av_num_entries`. + */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_FLAGS_MRAV_RESERVATION_SPLIT \ + UINT32_C(0x2) + uint32_t enables; + /* + * This bit must be '1' for the qp fields to be + * configured. + */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_QP \ + UINT32_C(0x1) + /* + * This bit must be '1' for the srq fields to be + * configured. + */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_SRQ \ + UINT32_C(0x2) + /* + * This bit must be '1' for the cq fields to be + * configured. + */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_CQ \ + UINT32_C(0x4) + /* + * This bit must be '1' for the vnic fields to be + * configured. + */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_VNIC \ + UINT32_C(0x8) + /* + * This bit must be '1' for the stat fields to be + * configured. + */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_STAT \ + UINT32_C(0x10) + /* + * This bit must be '1' for the tqm_sp fields to be + * configured. + */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_SP \ + UINT32_C(0x20) + /* + * This bit must be '1' for the tqm_ring0 fields to be + * configured. + */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING0 \ + UINT32_C(0x40) + /* + * This bit must be '1' for the tqm_ring1 fields to be + * configured. + */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING1 \ + UINT32_C(0x80) + /* + * This bit must be '1' for the tqm_ring2 fields to be + * configured. + */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING2 \ + UINT32_C(0x100) + /* + * This bit must be '1' for the tqm_ring3 fields to be + * configured. + */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING3 \ + UINT32_C(0x200) + /* + * This bit must be '1' for the tqm_ring4 fields to be + * configured. + */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING4 \ + UINT32_C(0x400) + /* + * This bit must be '1' for the tqm_ring5 fields to be + * configured. + */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING5 \ + UINT32_C(0x800) + /* + * This bit must be '1' for the tqm_ring6 fields to be + * configured. + */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING6 \ + UINT32_C(0x1000) + /* + * This bit must be '1' for the tqm_ring7 fields to be + * configured. + */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING7 \ + UINT32_C(0x2000) + /* + * This bit must be '1' for the mrav fields to be + * configured. + */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_MRAV \ + UINT32_C(0x4000) + /* + * This bit must be '1' for the tim fields to be + * configured. + */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TIM \ + UINT32_C(0x8000) + /* QPC page size and level. */ + uint8_t qpc_pg_size_qpc_lvl; + /* QPC PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_LVL_1 \ + UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_LVL_2 + /* QPC page size. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_1G + /* SRQ page size and level. */ + uint8_t srq_pg_size_srq_lvl; + /* SRQ PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_LVL_1 \ + UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_LVL_2 + /* SRQ page size. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_1G + /* CQ page size and level. */ + uint8_t cq_pg_size_cq_lvl; + /* CQ PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_LVL_1 \ + UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_LVL_2 + /* CQ page size. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_1G + /* VNIC page size and level. */ + uint8_t vnic_pg_size_vnic_lvl; + /* VNIC PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_LVL_1 \ + UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_LVL_2 + /* VNIC page size. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_1G + /* Stat page size and level. */ + uint8_t stat_pg_size_stat_lvl; + /* Stat PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_LVL_1 \ + UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_LVL_2 + /* Stat page size. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_1G + /* TQM slow path page size and level. */ + uint8_t tqm_sp_pg_size_tqm_sp_lvl; + /* TQM slow path PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_LVL_1 \ + UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_LVL_2 + /* TQM slow path page size. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_1G + /* TQM ring 0 page size and level. */ + uint8_t tqm_ring0_pg_size_tqm_ring0_lvl; + /* TQM ring 0 PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_LVL_1 \ + UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_LVL_2 + /* TQM ring 0 page size. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_1G + /* TQM ring 1 page size and level. */ + uint8_t tqm_ring1_pg_size_tqm_ring1_lvl; + /* TQM ring 1 PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_LVL_1 \ + UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_LVL_2 + /* TQM ring 1 page size. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_1G + /* TQM ring 2 page size and level. */ + uint8_t tqm_ring2_pg_size_tqm_ring2_lvl; + /* TQM ring 2 PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_LVL_1 \ + UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_LVL_2 + /* TQM ring 2 page size. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_1G + /* TQM ring 3 page size and level. */ + uint8_t tqm_ring3_pg_size_tqm_ring3_lvl; + /* TQM ring 3 PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_LVL_1 \ + UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_LVL_2 + /* TQM ring 3 page size. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_1G + /* TQM ring 4 page size and level. */ + uint8_t tqm_ring4_pg_size_tqm_ring4_lvl; + /* TQM ring 4 PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_LVL_1 \ + UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_LVL_2 + /* TQM ring 4 page size. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_1G + /* TQM ring 5 page size and level. */ + uint8_t tqm_ring5_pg_size_tqm_ring5_lvl; + /* TQM ring 5 PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_LVL_1 \ + UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_LVL_2 + /* TQM ring 5 page size. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_1G + /* TQM ring 6 page size and level. */ + uint8_t tqm_ring6_pg_size_tqm_ring6_lvl; + /* TQM ring 6 PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_LVL_1 \ + UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_LVL_2 + /* TQM ring 6 page size. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_1G + /* TQM ring 7 page size and level. */ + uint8_t tqm_ring7_pg_size_tqm_ring7_lvl; + /* TQM ring 7 PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_LVL_1 \ + UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_LVL_2 + /* TQM ring 7 page size. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_1G + /* MR/AV page size and level. */ + uint8_t mrav_pg_size_mrav_lvl; + /* MR/AV PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_LVL_1 \ + UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_LVL_2 + /* MR/AV page size. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_1G + /* Timer page size and level. */ + uint8_t tim_pg_size_tim_lvl; + /* Timer PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_LVL_1 \ + UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_LVL_2 + /* Timer page size. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_1G + /* QP page directory. */ + uint64_t qpc_page_dir; + /* SRQ page directory. */ + uint64_t srq_page_dir; + /* CQ page directory. */ + uint64_t cq_page_dir; + /* VNIC page directory. */ + uint64_t vnic_page_dir; + /* Stat page directory. */ + uint64_t stat_page_dir; + /* TQM slowpath page directory. */ + uint64_t tqm_sp_page_dir; + /* TQM ring 0 page directory. */ + uint64_t tqm_ring0_page_dir; + /* TQM ring 1 page directory. */ + uint64_t tqm_ring1_page_dir; + /* TQM ring 2 page directory. */ + uint64_t tqm_ring2_page_dir; + /* TQM ring 3 page directory. */ + uint64_t tqm_ring3_page_dir; + /* TQM ring 4 page directory. */ + uint64_t tqm_ring4_page_dir; + /* TQM ring 5 page directory. */ + uint64_t tqm_ring5_page_dir; + /* TQM ring 6 page directory. */ + uint64_t tqm_ring6_page_dir; + /* TQM ring 7 page directory. */ + uint64_t tqm_ring7_page_dir; + /* MR/AV page directory. */ + uint64_t mrav_page_dir; + /* Timer page directory. */ + uint64_t tim_page_dir; + /* Number of QPs. */ + uint32_t qp_num_entries; + /* Number of SRQs. */ + uint32_t srq_num_entries; + /* Number of CQs. */ + uint32_t cq_num_entries; + /* Number of Stats. */ + uint32_t stat_num_entries; + /* + * Number of TQM slowpath entries. + * + * TQM slowpath rings should be sized as follows: + * + * num_entries = num_vnics + num_l2_tx_rings + 2 * num_roce_qps + tqm_min_size + * + * Where: + * num_vnics is the number of VNICs allocated in the VNIC backing store + * num_l2_tx_rings is the number of L2 rings in the QP backing store + * num_roce_qps is the number of RoCE QPs in the QP backing store + * tqm_min_size is tqm_min_entries_per_ring reported by + * HWRM_FUNC_BACKING_STORE_QCAPS + * + * Note that TQM ring sizes cannot be extended while the system is + * operational. If a PF driver needs to extend a TQM ring, it needs + * to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate + * the backing store. + */ + uint32_t tqm_sp_num_entries; + /* + * Number of TQM ring 0 entries. + * + * TQM fastpath rings should be sized large enough to accommodate the + * maximum number of QPs (either L2 or RoCE, or both if shared) + * that can be enqueued to the TQM ring. + * + * Note that TQM ring sizes cannot be extended while the system is + * operational. If a PF driver needs to extend a TQM ring, it needs + * to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate + * the backing store. + */ + uint32_t tqm_ring0_num_entries; + /* + * Number of TQM ring 1 entries. + * + * TQM fastpath rings should be sized large enough to accommodate the + * maximum number of QPs (either L2 or RoCE, or both if shared) + * that can be enqueued to the TQM ring. + * + * Note that TQM ring sizes cannot be extended while the system is + * operational. If a PF driver needs to extend a TQM ring, it needs + * to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate + * the backing store. + */ + uint32_t tqm_ring1_num_entries; + /* + * Number of TQM ring 2 entries. + * + * TQM fastpath rings should be sized large enough to accommodate the + * maximum number of QPs (either L2 or RoCE, or both if shared) + * that can be enqueued to the TQM ring. + * + * Note that TQM ring sizes cannot be extended while the system is + * operational. If a PF driver needs to extend a TQM ring, it needs + * to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate + * the backing store. + */ + uint32_t tqm_ring2_num_entries; + /* + * Number of TQM ring 3 entries. + * + * TQM fastpath rings should be sized large enough to accommodate the + * maximum number of QPs (either L2 or RoCE, or both if shared) + * that can be enqueued to the TQM ring. + * + * Note that TQM ring sizes cannot be extended while the system is + * operational. If a PF driver needs to extend a TQM ring, it needs + * to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate + * the backing store. + */ + uint32_t tqm_ring3_num_entries; + /* + * Number of TQM ring 4 entries. + * + * TQM fastpath rings should be sized large enough to accommodate the + * maximum number of QPs (either L2 or RoCE, or both if shared) + * that can be enqueued to the TQM ring. + * + * Note that TQM ring sizes cannot be extended while the system is + * operational. If a PF driver needs to extend a TQM ring, it needs + * to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate + * the backing store. + */ + uint32_t tqm_ring4_num_entries; + /* + * Number of TQM ring 5 entries. + * + * TQM fastpath rings should be sized large enough to accommodate the + * maximum number of QPs (either L2 or RoCE, or both if shared) + * that can be enqueued to the TQM ring. + * + * Note that TQM ring sizes cannot be extended while the system is + * operational. If a PF driver needs to extend a TQM ring, it needs + * to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate + * the backing store. + */ + uint32_t tqm_ring5_num_entries; + /* + * Number of TQM ring 6 entries. + * + * TQM fastpath rings should be sized large enough to accommodate the + * maximum number of QPs (either L2 or RoCE, or both if shared) + * that can be enqueued to the TQM ring. + * + * Note that TQM ring sizes cannot be extended while the system is + * operational. If a PF driver needs to extend a TQM ring, it needs + * to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate + * the backing store. + */ + uint32_t tqm_ring6_num_entries; + /* + * Number of TQM ring 7 entries. + * + * TQM fastpath rings should be sized large enough to accommodate the + * maximum number of QPs (either L2 or RoCE, or both if shared) + * that can be enqueued to the TQM ring. + * + * Note that TQM ring sizes cannot be extended while the system is + * operational. If a PF driver needs to extend a TQM ring, it needs + * to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate + * the backing store. + */ + uint32_t tqm_ring7_num_entries; + /* + * If the MR/AV split reservation flag is not set, then this field + * represents the total number of MR plus AV entries. For versions + * of firmware that support the split reservation, when it is not + * specified half of the entries will be reserved for MRs and the + * other half for AVs. + * + * If the MR/AV split reservation flag is set, then this + * field is logically divided into two 16b fields. Bits `[31:16]` + * represents the `mr_num_entries` and bits `[15:0]` represents + * `av_num_entries`. The granularity of these values is defined by + * the `mrav_num_entries_unit` field returned by the + * `backing_store_qcaps` command. + */ + uint32_t mrav_num_entries; + /* Number of Timer entries. */ + uint32_t tim_num_entries; + /* Number of entries to reserve for QP1 */ + uint16_t qp_num_qp1_entries; + /* Number of entries to reserve for L2 */ + uint16_t qp_num_l2_entries; + /* Number of bytes that have been allocated for each context entry. */ + uint16_t qp_entry_size; + /* Number of entries to reserve for L2 */ + uint16_t srq_num_l2_entries; + /* Number of bytes that have been allocated for each context entry. */ + uint16_t srq_entry_size; + /* Number of entries to reserve for L2 */ + uint16_t cq_num_l2_entries; + /* Number of bytes that have been allocated for each context entry. */ + uint16_t cq_entry_size; + /* Number of entries to reserve for VNIC entries */ + uint16_t vnic_num_vnic_entries; + /* Number of entries to reserve for Ring table entries */ + uint16_t vnic_num_ring_table_entries; + /* Number of bytes that have been allocated for each context entry. */ + uint16_t vnic_entry_size; + /* Number of bytes that have been allocated for each context entry. */ + uint16_t stat_entry_size; + /* Number of bytes that have been allocated for each context entry. */ + uint16_t tqm_entry_size; + /* Number of bytes that have been allocated for each context entry. */ + uint16_t mrav_entry_size; + /* Number of bytes that have been allocated for each context entry. */ + uint16_t tim_entry_size; +} __rte_packed; + +/* hwrm_func_backing_store_cfg_output (size:128b/16B) */ +struct hwrm_func_backing_store_cfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/******************************** + * hwrm_func_backing_store_qcfg * + ********************************/ + + +/* hwrm_func_backing_store_qcfg_input (size:128b/16B) */ +struct hwrm_func_backing_store_qcfg_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; +} __rte_packed; + +/* hwrm_func_backing_store_qcfg_output (size:1920b/240B) */ +struct hwrm_func_backing_store_qcfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint32_t flags; + /* + * When set, the firmware only uses on-chip resources and does not + * expect any backing store to be provided by the host driver. This + * mode provides minimal L2 functionality (e.g. limited L2 resources, + * no RoCE). + */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_FLAGS_PREBOOT_MODE \ + UINT32_C(0x1) + /* + * When set, the 32b `mrav_num_entries` field is logically divided + * into two 16b fields, `mr_num_entries` and `av_num_entries`. + */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_FLAGS_MRAV_RESERVATION_SPLIT \ + UINT32_C(0x2) + uint8_t unused_0[4]; + /* + * This bit must be '1' for the qp fields to be + * configured. + */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_QP \ + UINT32_C(0x1) + /* + * This bit must be '1' for the srq fields to be + * configured. + */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_SRQ \ + UINT32_C(0x2) + /* + * This bit must be '1' for the cq fields to be + * configured. + */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_CQ \ + UINT32_C(0x4) + /* + * This bit must be '1' for the vnic fields to be + * configured. + */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_VNIC \ + UINT32_C(0x8) + /* + * This bit must be '1' for the stat fields to be + * configured. + */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_STAT \ + UINT32_C(0x10) + /* + * This bit must be '1' for the tqm_sp fields to be + * configured. + */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_SP \ + UINT32_C(0x20) + /* + * This bit must be '1' for the tqm_ring0 fields to be + * configured. + */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING0 \ + UINT32_C(0x40) + /* + * This bit must be '1' for the tqm_ring1 fields to be + * configured. + */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING1 \ + UINT32_C(0x80) + /* + * This bit must be '1' for the tqm_ring2 fields to be + * configured. + */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING2 \ + UINT32_C(0x100) + /* + * This bit must be '1' for the tqm_ring3 fields to be + * configured. + */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING3 \ + UINT32_C(0x200) + /* + * This bit must be '1' for the tqm_ring4 fields to be + * configured. + */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING4 \ + UINT32_C(0x400) + /* + * This bit must be '1' for the tqm_ring5 fields to be + * configured. + */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING5 \ + UINT32_C(0x800) + /* + * This bit must be '1' for the tqm_ring6 fields to be + * configured. + */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING6 \ + UINT32_C(0x1000) + /* + * This bit must be '1' for the tqm_ring7 fields to be + * configured. + */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING7 \ + UINT32_C(0x2000) + /* + * This bit must be '1' for the mrav fields to be + * configured. + */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_MRAV \ + UINT32_C(0x4000) + /* + * This bit must be '1' for the tim fields to be + * configured. + */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TIM \ + UINT32_C(0x8000) + /* QPC page size and level. */ + uint8_t qpc_pg_size_qpc_lvl; + /* QPC PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_LVL_1 \ + UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_LVL_2 + /* QPC page size. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_1G + /* SRQ page size and level. */ + uint8_t srq_pg_size_srq_lvl; + /* SRQ PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_LVL_1 \ + UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_LVL_2 + /* SRQ page size. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_1G + /* CQ page size and level. */ + uint8_t cq_pg_size_cq_lvl; + /* CQ PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_LVL_1 \ + UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_LVL_2 + /* CQ page size. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_1G + /* VNIC page size and level. */ + uint8_t vnic_pg_size_vnic_lvl; + /* VNIC PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_LVL_1 \ + UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_LVL_2 + /* VNIC page size. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_1G + /* Stat page size and level. */ + uint8_t stat_pg_size_stat_lvl; + /* Stat PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_LVL_1 \ + UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_LVL_2 + /* Stat page size. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_1G + /* TQM slow path page size and level. */ + uint8_t tqm_sp_pg_size_tqm_sp_lvl; + /* TQM slow path PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_LVL_1 \ + UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_LVL_2 + /* TQM slow path page size. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_1G + /* TQM ring 0 page size and level. */ + uint8_t tqm_ring0_pg_size_tqm_ring0_lvl; + /* TQM ring 0 PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_LVL_1 \ + UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_LVL_2 + /* TQM ring 0 page size. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_1G + /* TQM ring 1 page size and level. */ + uint8_t tqm_ring1_pg_size_tqm_ring1_lvl; + /* TQM ring 1 PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_LVL_1 \ + UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_LVL_2 + /* TQM ring 1 page size. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_1G + /* TQM ring 2 page size and level. */ + uint8_t tqm_ring2_pg_size_tqm_ring2_lvl; + /* TQM ring 2 PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_LVL_1 \ + UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_LVL_2 + /* TQM ring 2 page size. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_1G + /* TQM ring 3 page size and level. */ + uint8_t tqm_ring3_pg_size_tqm_ring3_lvl; + /* TQM ring 3 PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_LVL_1 \ + UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_LVL_2 + /* TQM ring 3 page size. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_1G + /* TQM ring 4 page size and level. */ + uint8_t tqm_ring4_pg_size_tqm_ring4_lvl; + /* TQM ring 4 PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_LVL_1 \ + UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_LVL_2 + /* TQM ring 4 page size. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_1G + /* TQM ring 5 page size and level. */ + uint8_t tqm_ring5_pg_size_tqm_ring5_lvl; + /* TQM ring 5 PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_LVL_1 \ + UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_LVL_2 + /* TQM ring 5 page size. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_1G + /* TQM ring 6 page size and level. */ + uint8_t tqm_ring6_pg_size_tqm_ring6_lvl; + /* TQM ring 6 PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_LVL_1 \ + UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_LVL_2 + /* TQM ring 6 page size. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_1G + /* TQM ring 7 page size and level. */ + uint8_t tqm_ring7_pg_size_tqm_ring7_lvl; + /* TQM ring 7 PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_LVL_1 \ + UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_LVL_2 + /* TQM ring 7 page size. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_1G + /* MR/AV page size and level. */ + uint8_t mrav_pg_size_mrav_lvl; + /* MR/AV PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_LVL_1 \ + UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_LVL_2 + /* MR/AV page size. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_1G + /* Timer page size and level. */ + uint8_t tim_pg_size_tim_lvl; + /* Timer PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_LVL_1 \ + UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_LVL_2 + /* Timer page size. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_1G + /* QP page directory. */ + uint64_t qpc_page_dir; + /* SRQ page directory. */ + uint64_t srq_page_dir; + /* CQ page directory. */ + uint64_t cq_page_dir; + /* VNIC page directory. */ + uint64_t vnic_page_dir; + /* Stat page directory. */ + uint64_t stat_page_dir; + /* TQM slowpath page directory. */ + uint64_t tqm_sp_page_dir; + /* TQM ring 0 page directory. */ + uint64_t tqm_ring0_page_dir; + /* TQM ring 1 page directory. */ + uint64_t tqm_ring1_page_dir; + /* TQM ring 2 page directory. */ + uint64_t tqm_ring2_page_dir; + /* TQM ring 3 page directory. */ + uint64_t tqm_ring3_page_dir; + /* TQM ring 4 page directory. */ + uint64_t tqm_ring4_page_dir; + /* TQM ring 5 page directory. */ + uint64_t tqm_ring5_page_dir; + /* TQM ring 6 page directory. */ + uint64_t tqm_ring6_page_dir; + /* TQM ring 7 page directory. */ + uint64_t tqm_ring7_page_dir; + /* MR/AV page directory. */ + uint64_t mrav_page_dir; + /* Timer page directory. */ + uint64_t tim_page_dir; + /* Number of entries to reserve for QP1 */ + uint16_t qp_num_qp1_entries; + /* Number of entries to reserve for L2 */ + uint16_t qp_num_l2_entries; + /* Number of QPs. */ + uint32_t qp_num_entries; + /* Number of SRQs. */ + uint32_t srq_num_entries; + /* Number of entries to reserve for L2 */ + uint16_t srq_num_l2_entries; + /* Number of entries to reserve for L2 */ + uint16_t cq_num_l2_entries; + /* Number of CQs. */ + uint32_t cq_num_entries; + /* Number of entries to reserve for VNIC entries */ + uint16_t vnic_num_vnic_entries; + /* Number of entries to reserve for Ring table entries */ + uint16_t vnic_num_ring_table_entries; + /* Number of Stats. */ + uint32_t stat_num_entries; + /* Number of TQM slowpath entries. */ + uint32_t tqm_sp_num_entries; + /* Number of TQM ring 0 entries. */ + uint32_t tqm_ring0_num_entries; + /* Number of TQM ring 1 entries. */ + uint32_t tqm_ring1_num_entries; + /* Number of TQM ring 2 entries. */ + uint32_t tqm_ring2_num_entries; + /* Number of TQM ring 3 entries. */ + uint32_t tqm_ring3_num_entries; + /* Number of TQM ring 4 entries. */ + uint32_t tqm_ring4_num_entries; + /* Number of TQM ring 5 entries. */ + uint32_t tqm_ring5_num_entries; + /* Number of TQM ring 6 entries. */ + uint32_t tqm_ring6_num_entries; + /* Number of TQM ring 7 entries. */ + uint32_t tqm_ring7_num_entries; + /* + * If the MR/AV split reservation flag is not set, then this field + * represents the total number of MR plus AV entries. For versions + * of firmware that support the split reservation, when it is not + * specified half of the entries will be reserved for MRs and the + * other half for AVs. + * + * If the MR/AV split reservation flag is set, then this + * field is logically divided into two 16b fields. Bits `[31:16]` + * represents the `mr_num_entries` and bits `[15:0]` represents + * `av_num_entries`. The granularity of these values is defined by + * the `mrav_num_entries_unit` field returned by the + * `backing_store_qcaps` command. + */ + uint32_t mrav_num_entries; + /* Number of Timer entries. */ + uint32_t tim_num_entries; + uint8_t unused_1[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as 1 + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal + * processor, the order of writes has to be such that this field + * is written last. + */ + uint8_t valid; +} __rte_packed; + +/**************************** + * hwrm_error_recovery_qcfg * + ****************************/ + + +/* hwrm_error_recovery_qcfg_input (size:192b/24B) */ +struct hwrm_error_recovery_qcfg_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + uint8_t unused_0[8]; +} __rte_packed; + +/* hwrm_error_recovery_qcfg_output (size:1664b/208B) */ +struct hwrm_error_recovery_qcfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint32_t flags; + /* + * When this flag is set to 1, error recovery will be initiated + * through master function driver. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FLAGS_HOST UINT32_C(0x1) + /* + * When this flag is set to 1, error recovery will be performed + * through Co processor. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FLAGS_CO_CPU UINT32_C(0x2) + /* + * Driver Polling frequency. This value is in units of 100msec. + * Typical value would be 10 to indicate 1sec. + * Drivers can poll FW health status, Heartbeat, reset_counter with + * this frequency. + */ + uint32_t driver_polling_freq; + /* + * This value is in units of 100msec. + * Typical value would be 30 to indicate 3sec. + * Master function wait period from detecting a fatal error to + * initiating reset. In this time period Master PF expects every + * active driver will detect fatal error. + */ + uint32_t master_func_wait_period; + /* + * This value is in units of 100msec. + * Typical value would be 50 to indicate 5sec. + * Normal function wait period from fatal error detection to + * polling FW health status. In this time period, drivers should not + * do any PCIe MMIO transaction and should not send any HWRM commands. + */ + uint32_t normal_func_wait_period; + /* + * This value is in units of 100msec. + * Typical value would be 20 to indicate 2sec. + * This field indicates that, master function wait period after chip + * reset. After this time, master function should reinitialize with + * FW. + */ + uint32_t master_func_wait_period_after_reset; + /* + * This value is in units of 100msec. + * Typical value would be 60 to indicate 6sec. + * This field is applicable to both master and normal functions. + * Even after chip reset, if FW status not changed to ready, + * then all the functions can poll for this much time and bailout. + */ + uint32_t max_bailout_time_after_reset; + /* + * FW health status register. + * Lower 2 bits indicates address space location and upper 30 bits + * indicates upper 30bits of the register address. + * A value of 0xFFFF-FFFF indicates this register does not exist. + */ + uint32_t fw_health_status_reg; + /* Lower 2 bits indicates address space location. */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SPACE_MASK \ + UINT32_C(0x3) + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SPACE_SFT \ + 0 + /* + * If value is 0, this register is located in PCIe config space. + * Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SPACE_PCIE_CFG \ + UINT32_C(0x0) + /* + * If value is 1, this register is located in GRC address space. + * Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SPACE_GRC \ + UINT32_C(0x1) + /* + * If value is 2, this register is located in first BAR address + * space. Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SPACE_BAR0 \ + UINT32_C(0x2) + /* + * If value is 3, this register is located in second BAR address + * space. Drivers have to map appropriate window to access this + * Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SPACE_BAR1 \ + UINT32_C(0x3) + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SPACE_LAST \ + HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SPACE_BAR1 + /* Upper 30bits of the register address. */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_MASK \ + UINT32_C(0xfffffffc) + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SFT \ + 2 + /* + * FW HeartBeat register. + * Lower 2 bits indicates address space location and upper 30 bits + * indicates actual address. + * A value of 0xFFFF-FFFF indicates this register does not exist. + */ + uint32_t fw_heartbeat_reg; + /* Lower 2 bits indicates address space location. */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SPACE_MASK \ + UINT32_C(0x3) + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SPACE_SFT \ + 0 + /* + * If value is 0, this register is located in PCIe config space. + * Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SPACE_PCIE_CFG \ + UINT32_C(0x0) + /* + * If value is 1, this register is located in GRC address space. + * Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SPACE_GRC \ + UINT32_C(0x1) + /* + * If value is 2, this register is located in first BAR address + * space. Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SPACE_BAR0 \ + UINT32_C(0x2) + /* + * If value is 3, this register is located in second BAR address + * space. Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SPACE_BAR1 \ + UINT32_C(0x3) + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SPACE_LAST \ + HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SPACE_BAR1 + /* Upper 30bits of the register address. */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_MASK \ + UINT32_C(0xfffffffc) + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SFT \ + 2 + /* + * FW reset counter. + * Lower 2 bits indicates address space location and upper 30 bits + * indicates actual address. + * A value of 0xFFFF-FFFF indicates this register does not exist. + */ + uint32_t fw_reset_cnt_reg; + /* Lower 2 bits indicates address space location. */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SPACE_MASK \ + UINT32_C(0x3) + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SPACE_SFT \ + 0 + /* + * If value is 0, this register is located in PCIe config space. + * Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SPACE_PCIE_CFG \ + UINT32_C(0x0) + /* + * If value is 1, this register is located in GRC address space. + * Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SPACE_GRC \ + UINT32_C(0x1) + /* + * If value is 2, this register is located in first BAR address + * space. Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SPACE_BAR0 \ + UINT32_C(0x2) + /* + * If value is 3, this register is located in second BAR address + * space. Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SPACE_BAR1 \ + UINT32_C(0x3) + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SPACE_LAST \ + HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SPACE_BAR1 + /* Upper 30bits of the register address. */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_MASK \ + UINT32_C(0xfffffffc) + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SFT \ + 2 + /* + * Reset Inprogress Register address for PFs. + * Lower 2 bits indicates address space location and upper 30 bits + * indicates actual address. + * A value of 0xFFFF-FFFF indicates this register does not exist. + */ + uint32_t reset_inprogress_reg; + /* Lower 2 bits indicates address space location. */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SPACE_MASK \ + UINT32_C(0x3) + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SPACE_SFT \ + 0 + /* + * If value is 0, this register is located in PCIe config space. + * Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SPACE_PCIE_CFG \ + UINT32_C(0x0) + /* + * If value is 1, this register is located in GRC address space. + * Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SPACE_GRC \ + UINT32_C(0x1) + /* + * If value is 2, this register is located in first BAR address + * space. Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SPACE_BAR0 \ + UINT32_C(0x2) + /* + * If value is 3, this register is located in second BAR address + * space. Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SPACE_BAR1 \ + UINT32_C(0x3) + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SPACE_LAST \ + HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SPACE_BAR1 + /* Upper 30bits of the register address. */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_MASK \ + UINT32_C(0xfffffffc) + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SFT \ + 2 + /* This field indicates the mask value for reset_inprogress_reg. */ + uint32_t reset_inprogress_reg_mask; + uint8_t unused_0[3]; + /* + * Array of registers and value count to reset the Chip + * Each array count has reset_reg, reset_reg_val, delay_after_reset + * in TLV format. Depending upon Chip type, number of reset registers + * will vary. Drivers have to write reset_reg_val in the reset_reg + * location in the same sequence in order to recover from a fatal + * error. + */ + uint8_t reg_array_cnt; + /* + * Reset register. + * Lower 2 bits indicates address space location and upper 30 bits + * indicates actual address. + * A value of 0xFFFF-FFFF indicates this register does not exist. + */ + uint32_t reset_reg[16]; + /* Lower 2 bits indicates address space location. */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SPACE_MASK \ + UINT32_C(0x3) + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SPACE_SFT 0 + /* + * If value is 0, this register is located in PCIe config space. + * Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SPACE_PCIE_CFG \ + UINT32_C(0x0) + /* + * If value is 1, this register is located in GRC address space. + * Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SPACE_GRC \ + UINT32_C(0x1) + /* + * If value is 2, this register is located in first BAR address + * space. Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SPACE_BAR0 \ + UINT32_C(0x2) + /* + * If value is 3, this register is located in second BAR address + * space. Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SPACE_BAR1 \ + UINT32_C(0x3) + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SPACE_LAST \ + HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SPACE_BAR1 + /* Upper 30bits of the register address. */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_MASK \ + UINT32_C(0xfffffffc) + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SFT 2 + /* Value to be written in reset_reg to reset the controller. */ + uint32_t reset_reg_val[16]; + /* + * This value is in units of 1msec. + * Typical value would be 10 to indicate 10msec. + * Some of the operations like Core reset require delay before + * accessing PCIE MMIO register space. + * If this value is non-zero, drivers have to wait for + * this much time after writing reset_reg_val in reset_reg. + */ + uint8_t delay_after_reset[16]; + /* + * Error recovery counter. + * Lower 2 bits indicates address space location and upper 30 bits + * indicates actual address. + * A value of 0xFFFF-FFFF indicates this register does not exist. + */ + uint32_t err_recovery_cnt_reg; + /* Lower 2 bits indicates address space location. */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_ERR_RECOVERY_CNT_REG_ADDR_SPACE_MASK \ + UINT32_C(0x3) + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_ERR_RECOVERY_CNT_REG_ADDR_SPACE_SFT \ + 0 + /* + * If value is 0, this register is located in PCIe config space. + * Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_ERR_RECOVERY_CNT_REG_ADDR_SPACE_PCIE_CFG \ + UINT32_C(0x0) + /* + * If value is 1, this register is located in GRC address space. + * Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_ERR_RECOVERY_CNT_REG_ADDR_SPACE_GRC \ + UINT32_C(0x1) + /* + * If value is 2, this register is located in first BAR address + * space. Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_ERR_RECOVERY_CNT_REG_ADDR_SPACE_BAR0 \ + UINT32_C(0x2) + /* + * If value is 3, this register is located in second BAR address + * space. Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_ERR_RECOVERY_CNT_REG_ADDR_SPACE_BAR1 \ + UINT32_C(0x3) + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_ERR_RECOVERY_CNT_REG_ADDR_SPACE_LAST \ + HWRM_ERROR_RECOVERY_QCFG_OUTPUT_ERR_RECOVERY_CNT_REG_ADDR_SPACE_BAR1 + /* Upper 30bits of the register address. */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_ERR_RECOVERY_CNT_REG_ADDR_MASK \ + UINT32_C(0xfffffffc) + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_ERR_RECOVERY_CNT_REG_ADDR_SFT \ + 2 + uint8_t unused_1[3]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal + * processor, the order of writes has to be such that this field + * is written last. + */ + uint8_t valid; +} __rte_packed; + +/*********************** + * hwrm_func_vlan_qcfg * + ***********************/ + + +/* hwrm_func_vlan_qcfg_input (size:192b/24B) */ +struct hwrm_func_vlan_qcfg_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* + * Function ID of the function that is being + * configured. + * If set to 0xFF... (All Fs), then the configuration is + * for the requesting function. + */ + uint16_t fid; + uint8_t unused_0[6]; +} __rte_packed; + +/* hwrm_func_vlan_qcfg_output (size:320b/40B) */ +struct hwrm_func_vlan_qcfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint64_t unused_0; + /* S-TAG VLAN identifier configured for the function. */ + uint16_t stag_vid; + /* S-TAG PCP value configured for the function. */ + uint8_t stag_pcp; + uint8_t unused_1; + /* + * S-TAG TPID value configured for the function. This field is specified in + * network byte order. + */ + uint16_t stag_tpid; + /* C-TAG VLAN identifier configured for the function. */ + uint16_t ctag_vid; + /* C-TAG PCP value configured for the function. */ + uint8_t ctag_pcp; + uint8_t unused_2; + /* + * C-TAG TPID value configured for the function. This field is specified in + * network byte order. + */ + uint16_t ctag_tpid; + /* Future use. */ + uint32_t rsvd2; + /* Future use. */ + uint32_t rsvd3; + uint8_t unused_3[3]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/********************** + * hwrm_func_vlan_cfg * + **********************/ + + +/* hwrm_func_vlan_cfg_input (size:384b/48B) */ +struct hwrm_func_vlan_cfg_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* + * Function ID of the function that is being + * configured. + * If set to 0xFF... (All Fs), then the configuration is + * for the requesting function. + */ + uint16_t fid; + uint8_t unused_0[2]; + uint32_t enables; + /* + * This bit must be '1' for the stag_vid field to be + * configured. + */ + #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_STAG_VID UINT32_C(0x1) + /* + * This bit must be '1' for the ctag_vid field to be + * configured. + */ + #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_CTAG_VID UINT32_C(0x2) + /* + * This bit must be '1' for the stag_pcp field to be + * configured. + */ + #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_STAG_PCP UINT32_C(0x4) + /* + * This bit must be '1' for the ctag_pcp field to be + * configured. + */ + #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_CTAG_PCP UINT32_C(0x8) + /* + * This bit must be '1' for the stag_tpid field to be + * configured. + */ + #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_STAG_TPID UINT32_C(0x10) + /* + * This bit must be '1' for the ctag_tpid field to be + * configured. + */ + #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_CTAG_TPID UINT32_C(0x20) + /* S-TAG VLAN identifier configured for the function. */ + uint16_t stag_vid; + /* S-TAG PCP value configured for the function. */ + uint8_t stag_pcp; + uint8_t unused_1; + /* + * S-TAG TPID value configured for the function. This field is specified in + * network byte order. + */ + uint16_t stag_tpid; + /* C-TAG VLAN identifier configured for the function. */ + uint16_t ctag_vid; + /* C-TAG PCP value configured for the function. */ + uint8_t ctag_pcp; + uint8_t unused_2; + /* + * C-TAG TPID value configured for the function. This field is specified in + * network byte order. + */ + uint16_t ctag_tpid; + /* Future use. */ + uint32_t rsvd1; + /* Future use. */ + uint32_t rsvd2; + uint8_t unused_3[4]; +} __rte_packed; + +/* hwrm_func_vlan_cfg_output (size:128b/16B) */ +struct hwrm_func_vlan_cfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/******************************* + * hwrm_func_vf_vnic_ids_query * + *******************************/ + + +/* hwrm_func_vf_vnic_ids_query_input (size:256b/32B) */ +struct hwrm_func_vf_vnic_ids_query_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* + * This value is used to identify a Virtual Function (VF). + * The scope of VF ID is local within a PF. + */ + uint16_t vf_id; + uint8_t unused_0[2]; + /* Max number of vnic ids in vnic id table */ + uint32_t max_vnic_id_cnt; + /* This is the address for VF VNIC ID table */ + uint64_t vnic_id_tbl_addr; +} __rte_packed; + +/* hwrm_func_vf_vnic_ids_query_output (size:128b/16B) */ +struct hwrm_func_vf_vnic_ids_query_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* + * Actual number of vnic ids + * + * Each VNIC ID is written as a 32-bit number. + */ + uint32_t vnic_id_cnt; + uint8_t unused_0[3]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/*********************** + * hwrm_func_vf_bw_cfg * + ***********************/ + + +/* hwrm_func_vf_bw_cfg_input (size:960b/120B) */ +struct hwrm_func_vf_bw_cfg_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* + * The number of VF functions that are being configured. + * The cmd space allows up to 50 VFs' BW to be configured with one cmd. + */ + uint16_t num_vfs; + uint16_t unused[3]; + /* These 16-bit fields contain the VF fid and the rate scale percentage. */ + uint16_t vfn[48]; + /* The physical VF id the adjustment will be made to. */ + #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_VFID_MASK UINT32_C(0xfff) + #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_VFID_SFT 0 + /* + * This field configures the rate scale percentage of the VF as specified + * by the physical VF id. + */ + #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_MASK UINT32_C(0xf000) + #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_SFT 12 + /* 0% of the max tx rate */ + #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_0 \ + (UINT32_C(0x0) << 12) + /* 6.66% of the max tx rate */ + #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_6_66 \ + (UINT32_C(0x1) << 12) + /* 13.33% of the max tx rate */ + #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_13_33 \ + (UINT32_C(0x2) << 12) + /* 20% of the max tx rate */ + #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_20 \ + (UINT32_C(0x3) << 12) + /* 26.66% of the max tx rate */ + #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_26_66 \ + (UINT32_C(0x4) << 12) + /* 33% of the max tx rate */ + #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_33_33 \ + (UINT32_C(0x5) << 12) + /* 40% of the max tx rate */ + #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_40 \ + (UINT32_C(0x6) << 12) + /* 46.66% of the max tx rate */ + #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_46_66 \ + (UINT32_C(0x7) << 12) + /* 53.33% of the max tx rate */ + #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_53_33 \ + (UINT32_C(0x8) << 12) + /* 60% of the max tx rate */ + #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_60 \ + (UINT32_C(0x9) << 12) + /* 66.66% of the max tx rate */ + #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_66_66 \ + (UINT32_C(0xa) << 12) + /* 53.33% of the max tx rate */ + #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_73_33 \ + (UINT32_C(0xb) << 12) + /* 80% of the max tx rate */ + #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_80 \ + (UINT32_C(0xc) << 12) + /* 86.66% of the max tx rate */ + #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_86_66 \ + (UINT32_C(0xd) << 12) + /* 93.33% of the max tx rate */ + #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_93_33 \ + (UINT32_C(0xe) << 12) + /* 100% of the max tx rate */ + #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_100 \ + (UINT32_C(0xf) << 12) + #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_LAST \ + HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_100 +} __rte_packed; + +/* hwrm_func_vf_bw_cfg_output (size:128b/16B) */ +struct hwrm_func_vf_bw_cfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/************************ + * hwrm_func_vf_bw_qcfg * + ************************/ + + +/* hwrm_func_vf_bw_qcfg_input (size:960b/120B) */ +struct hwrm_func_vf_bw_qcfg_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* + * The number of VF functions that are being queried. + * The inline response space allows the host to query up to 50 VFs' + * rate scale percentage + */ + uint16_t num_vfs; + uint16_t unused[3]; + /* These 16-bit fields contain the VF fid */ + uint16_t vfn[48]; + /* The physical VF id of interest */ + #define HWRM_FUNC_VF_BW_QCFG_INPUT_VFN_VFID_MASK UINT32_C(0xfff) + #define HWRM_FUNC_VF_BW_QCFG_INPUT_VFN_VFID_SFT 0 +} __rte_packed; + +/* hwrm_func_vf_bw_qcfg_output (size:960b/120B) */ +struct hwrm_func_vf_bw_qcfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* + * The number of VF functions that are being queried. + * The inline response space allows the host to query up to 50 VFs' rate + * scale percentage + */ + uint16_t num_vfs; + uint16_t unused[3]; + /* These 16-bit fields contain the VF fid and the rate scale percentage. */ + uint16_t vfn[48]; + /* The physical VF id the adjustment will be made to. */ + #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_VFID_MASK UINT32_C(0xfff) + #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_VFID_SFT 0 + /* + * This field configures the rate scale percentage of the VF as specified + * by the physical VF id. + */ + #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_MASK UINT32_C(0xf000) + #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_SFT 12 + /* 0% of the max tx rate */ + #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_0 \ + (UINT32_C(0x0) << 12) + /* 6.66% of the max tx rate */ + #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_6_66 \ + (UINT32_C(0x1) << 12) + /* 13.33% of the max tx rate */ + #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_13_33 \ + (UINT32_C(0x2) << 12) + /* 20% of the max tx rate */ + #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_20 \ + (UINT32_C(0x3) << 12) + /* 26.66% of the max tx rate */ + #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_26_66 \ + (UINT32_C(0x4) << 12) + /* 33% of the max tx rate */ + #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_33_33 \ + (UINT32_C(0x5) << 12) + /* 40% of the max tx rate */ + #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_40 \ + (UINT32_C(0x6) << 12) + /* 46.66% of the max tx rate */ + #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_46_66 \ + (UINT32_C(0x7) << 12) + /* 53.33% of the max tx rate */ + #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_53_33 \ + (UINT32_C(0x8) << 12) + /* 60% of the max tx rate */ + #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_60 \ + (UINT32_C(0x9) << 12) + /* 66.66% of the max tx rate */ + #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_66_66 \ + (UINT32_C(0xa) << 12) + /* 53.33% of the max tx rate */ + #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_73_33 \ + (UINT32_C(0xb) << 12) + /* 80% of the max tx rate */ + #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_80 \ + (UINT32_C(0xc) << 12) + /* 86.66% of the max tx rate */ + #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_86_66 \ + (UINT32_C(0xd) << 12) + /* 93.33% of the max tx rate */ + #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_93_33 \ + (UINT32_C(0xe) << 12) + /* 100% of the max tx rate */ + #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_100 \ + (UINT32_C(0xf) << 12) + #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_LAST \ + HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_100 + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/*************************** + * hwrm_func_drv_if_change * + ***************************/ + + +/* hwrm_func_drv_if_change_input (size:192b/24B) */ +struct hwrm_func_drv_if_change_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + uint32_t flags; + /* + * When this bit is '1', the function driver is indicating + * that the IF state is changing to UP state. The call should + * be made at the beginning of the driver's open call before + * resources are allocated. After making the call, the driver + * should check the response to see if any resources may have + * changed (see the response below). If the driver fails + * the open call, the driver should make this call again with + * this bit cleared to indicate that the IF state is not UP. + * During the driver's close call when the IF state is changing + * to DOWN, the driver should make this call with the bit cleared + * after all resources have been freed. + */ + #define HWRM_FUNC_DRV_IF_CHANGE_INPUT_FLAGS_UP UINT32_C(0x1) + uint32_t unused; +} __rte_packed; + +/* hwrm_func_drv_if_change_output (size:128b/16B) */ +struct hwrm_func_drv_if_change_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint32_t flags; + /* + * When this bit is '1', it indicates that the resources reserved + * for this function may have changed. The driver should check + * resource capabilities and reserve resources again before + * allocating resources. + */ + #define HWRM_FUNC_DRV_IF_CHANGE_OUTPUT_FLAGS_RESC_CHANGE \ + UINT32_C(0x1) + /* + * When this bit is '1', it indicates that the firmware got changed / reset. + * The driver should do complete re-initialization when that bit is set. + */ + #define HWRM_FUNC_DRV_IF_CHANGE_OUTPUT_FLAGS_HOT_FW_RESET_DONE \ + UINT32_C(0x2) + uint8_t unused_0[3]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/******************************* + * hwrm_func_host_pf_ids_query * + *******************************/ + + +/* hwrm_func_host_pf_ids_query_input (size:192b/24B) */ +struct hwrm_func_host_pf_ids_query_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + uint8_t host; + /* + * # If this bit is set to '1', the query will contain PF(s) + * belongs to SOC host. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_INPUT_HOST_SOC UINT32_C(0x1) + /* + * # If this bit is set to '1', the query will contain PF(s) + * belongs to EP0 host. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_INPUT_HOST_EP_0 UINT32_C(0x2) + /* + * # If this bit is set to '1', the query will contain PF(s) + * belongs to EP1 host. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_INPUT_HOST_EP_1 UINT32_C(0x4) + /* + * # If this bit is set to '1', the query will contain PF(s) + * belongs to EP2 host. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_INPUT_HOST_EP_2 UINT32_C(0x8) + /* + * # If this bit is set to '1', the query will contain PF(s) + * belongs to EP3 host. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_INPUT_HOST_EP_3 UINT32_C(0x10) + /* + * This provides a filter of what PF(s) will be returned in the + * query.. + */ + uint8_t filter; + /* + * all available PF(s) belong to the host(s) (defined in the + * host field). This includes the hidden PFs. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_INPUT_FILTER_ALL UINT32_C(0x0) + /* + * all available PF(s) belong to the host(s) (defined in the + * host field) that is available for L2 traffic. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_INPUT_FILTER_L2 UINT32_C(0x1) + /* + * all available PF(s) belong to the host(s) (defined in the + * host field) that is available for ROCE traffic. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_INPUT_FILTER_ROCE UINT32_C(0x2) + #define HWRM_FUNC_HOST_PF_IDS_QUERY_INPUT_FILTER_LAST \ + HWRM_FUNC_HOST_PF_IDS_QUERY_INPUT_FILTER_ROCE + uint8_t unused_1[6]; +} __rte_packed; + +/* hwrm_func_host_pf_ids_query_output (size:128b/16B) */ +struct hwrm_func_host_pf_ids_query_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* This provides the first PF ID of the device. */ + uint16_t first_pf_id; + uint16_t pf_ordinal_mask; + /* + * When this bit is '1', it indicates first PF belongs to one of + * the hosts defined in the input request. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_0 \ + UINT32_C(0x1) + /* + * When this bit is '1', it indicates 2nd PF belongs to one of the + * hosts defined in the input request. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_1 \ + UINT32_C(0x2) + /* + * When this bit is '1', it indicates 3rd PF belongs to one of the + * hosts defined in the input request. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_2 \ + UINT32_C(0x4) + /* + * When this bit is '1', it indicates 4th PF belongs to one of the + * hosts defined in the input request. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_3 \ + UINT32_C(0x8) + /* + * When this bit is '1', it indicates 5th PF belongs to one of the + * hosts defined in the input request. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_4 \ + UINT32_C(0x10) + /* + * When this bit is '1', it indicates 6th PF belongs to one of the + * hosts defined in the input request. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_5 \ + UINT32_C(0x20) + /* + * When this bit is '1', it indicates 7th PF belongs to one of the + * hosts defined in the input request. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_6 \ + UINT32_C(0x40) + /* + * When this bit is '1', it indicates 8th PF belongs to one of the + * hosts defined in the input request. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_7 \ + UINT32_C(0x80) + /* + * When this bit is '1', it indicates 9th PF belongs to one of the + * hosts defined in the input request. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_8 \ + UINT32_C(0x100) + /* + * When this bit is '1', it indicates 10th PF belongs to one of the + * hosts defined in the input request. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_9 \ + UINT32_C(0x200) + /* + * When this bit is '1', it indicates 11th PF belongs to one of the + * hosts defined in the input request. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_10 \ + UINT32_C(0x400) + /* + * When this bit is '1', it indicates 12th PF belongs to one of the + * hosts defined in the input request. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_11 \ + UINT32_C(0x800) + /* + * When this bit is '1', it indicates 13th PF belongs to one of the + * hosts defined in the input request. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_12 \ + UINT32_C(0x1000) + /* + * When this bit is '1', it indicates 14th PF belongs to one of the + * hosts defined in the input request. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_13 \ + UINT32_C(0x2000) + /* + * When this bit is '1', it indicates 15th PF belongs to one of the + * hosts defined in the input request. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_14 \ + UINT32_C(0x4000) + /* + * When this bit is '1', it indicates 16th PF belongs to one of the + * hosts defined in the input request. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_15 \ + UINT32_C(0x8000) + uint8_t unused_1[3]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/********************* + * hwrm_port_phy_cfg * + *********************/ + + +/* hwrm_port_phy_cfg_input (size:448b/56B) */ +struct hwrm_port_phy_cfg_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + uint32_t flags; + /* + * When this bit is set to '1', the PHY for the port shall + * be reset. + * + * # If this bit is set to 1, then the HWRM shall reset the + * PHY after applying PHY configuration changes specified + * in this command. + * # In order to guarantee that PHY configuration changes + * specified in this command take effect, the HWRM + * client should set this flag to 1. + * # If this bit is not set to 1, then the HWRM may reset + * the PHY depending on the current PHY configuration and + * settings specified in this command. + */ + #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_RESET_PHY \ + UINT32_C(0x1) + /* deprecated bit. Do not use!!! */ + #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_DEPRECATED \ + UINT32_C(0x2) + /* + * When this bit is set to '1', and the force_pam4_link_speed + * bit in the 'enables' field is '0', the link shall be forced + * to the force_link_speed value. + * + * When this bit is set to '1', and the force_pam4_link_speed + * bit in the 'enables' field is '1', the link shall be forced + * to the force_pam4_link_speed value. + * + * When this bit is set to '1', the HWRM client should + * not enable any of the auto negotiation related + * fields represented by auto_XXX fields in this command. + * When this bit is set to '1' and the HWRM client has + * enabled a auto_XXX field in this command, then the + * HWRM shall ignore the enabled auto_XXX field. + * + * When this bit is set to zero, the link + * shall be allowed to autoneg. + */ + #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FORCE \ + UINT32_C(0x4) + /* + * When this bit is set to '1', the auto-negotiation process + * shall be restarted on the link. + */ + #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_RESTART_AUTONEG \ + UINT32_C(0x8) + /* + * When this bit is set to '1', Energy Efficient Ethernet + * (EEE) is requested to be enabled on this link. + * If EEE is not supported on this port, then this flag + * shall be ignored by the HWRM. + */ + #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_ENABLE \ + UINT32_C(0x10) + /* + * When this bit is set to '1', Energy Efficient Ethernet + * (EEE) is requested to be disabled on this link. + * If EEE is not supported on this port, then this flag + * shall be ignored by the HWRM. + */ + #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_DISABLE \ + UINT32_C(0x20) + /* + * When this bit is set to '1' and EEE is enabled on this + * link, then TX LPI is requested to be enabled on the link. + * If EEE is not supported on this port, then this flag + * shall be ignored by the HWRM. + * If EEE is disabled on this port, then this flag shall be + * ignored by the HWRM. + */ + #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_TX_LPI_ENABLE \ + UINT32_C(0x40) + /* + * When this bit is set to '1' and EEE is enabled on this + * link, then TX LPI is requested to be disabled on the link. + * If EEE is not supported on this port, then this flag + * shall be ignored by the HWRM. + * If EEE is disabled on this port, then this flag shall be + * ignored by the HWRM. + */ + #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_TX_LPI_DISABLE \ + UINT32_C(0x80) + /* + * When set to 1, then the HWRM shall enable FEC autonegotitation + * on this port if supported. + * When set to 0, then this flag shall be ignored. + * If FEC autonegotiation is not supported, then the HWRM shall ignore this + * flag. + */ + #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_AUTONEG_ENABLE \ + UINT32_C(0x100) + /* + * When set to 1, then the HWRM shall disable FEC autonegotiation + * on this port if supported. + * When set to 0, then this flag shall be ignored. + * If FEC autonegotiation is not supported, then the HWRM shall ignore this + * flag. + */ + #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_AUTONEG_DISABLE \ + UINT32_C(0x200) + /* + * When set to 1, then the HWRM shall enable FEC CLAUSE 74 (Fire Code) + * on this port if supported. + * When set to 0, then this flag shall be ignored. + * If FEC CLAUSE 74 is not supported, then the HWRM shall ignore this + * flag. + */ + #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE74_ENABLE \ + UINT32_C(0x400) + /* + * When set to 1, then the HWRM shall disable FEC CLAUSE 74 (Fire Code) + * on this port if supported. + * When set to 0, then this flag shall be ignored. + * If FEC CLAUSE 74 is not supported, then the HWRM shall ignore this + * flag. + */ + #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE74_DISABLE \ + UINT32_C(0x800) + /* + * When set to 1, then the HWRM shall enable FEC CLAUSE 91 (Reed Solomon) + * on this port if supported. + * When set to 0, then this flag shall be ignored. + * If FEC CLAUSE 91 is not supported, then the HWRM shall ignore this + * flag. + */ + #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE91_ENABLE \ + UINT32_C(0x1000) + /* + * When set to 1, then the HWRM shall disable FEC CLAUSE 91 (Reed Solomon) + * on this port if supported. + * When set to 0, then this flag shall be ignored. + * If FEC CLAUSE 91 is not supported, then the HWRM shall ignore this + * flag. + */ + #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE91_DISABLE \ + UINT32_C(0x2000) + /* + * When this bit is set to '1', the link shall be forced to + * be taken down. + * + * # When this bit is set to '1", all other + * command input settings related to the link speed shall + * be ignored. + * Once the link state is forced down, it can be + * explicitly cleared from that state by setting this flag + * to '0'. + * # If this flag is set to '0', then the link shall be + * cleared from forced down state if the link is in forced + * down state. + * There may be conditions (e.g. out-of-band or sideband + * configuration changes for the link) outside the scope + * of the HWRM implementation that may clear forced down + * link state. + */ + #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FORCE_LINK_DWN \ + UINT32_C(0x4000) + uint32_t enables; + /* + * This bit must be '1' for the auto_mode field to be + * configured. + */ + #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_MODE \ + UINT32_C(0x1) + /* + * This bit must be '1' for the auto_duplex field to be + * configured. + */ + #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_DUPLEX \ + UINT32_C(0x2) + /* + * This bit must be '1' for the auto_pause field to be + * configured. + */ + #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_PAUSE \ + UINT32_C(0x4) + /* + * This bit must be '1' for the auto_link_speed field to be + * configured. + */ + #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_LINK_SPEED \ + UINT32_C(0x8) + /* + * This bit must be '1' for the auto_link_speed_mask field to be + * configured. + */ + #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_LINK_SPEED_MASK \ + UINT32_C(0x10) + /* + * This bit must be '1' for the wirespeed field to be + * configured. + */ + #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_WIRESPEED \ + UINT32_C(0x20) + /* + * This bit must be '1' for the lpbk field to be + * configured. + */ + #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_LPBK \ + UINT32_C(0x40) + /* + * This bit must be '1' for the preemphasis field to be + * configured. + */ + #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_PREEMPHASIS \ + UINT32_C(0x80) + /* + * This bit must be '1' for the force_pause field to be + * configured. + */ + #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_FORCE_PAUSE \ + UINT32_C(0x100) + /* + * This bit must be '1' for the eee_link_speed_mask field to be + * configured. + */ + #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_EEE_LINK_SPEED_MASK \ + UINT32_C(0x200) + /* + * This bit must be '1' for the tx_lpi_timer field to be + * configured. + */ + #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_TX_LPI_TIMER \ + UINT32_C(0x400) + /* Port ID of port that is to be configured. */ + uint16_t port_id; + /* + * This is the speed that will be used if the force + * bit is '1'. If unsupported speed is selected, an error + * will be generated. + */ + uint16_t force_link_speed; + /* 100Mb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_100MB UINT32_C(0x1) + /* 1Gb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_1GB UINT32_C(0xa) + /* 2Gb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_2GB UINT32_C(0x14) + /* 25Gb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_2_5GB UINT32_C(0x19) + /* 10Gb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_10GB UINT32_C(0x64) + /* 20Mb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_20GB UINT32_C(0xc8) + /* 25Gb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_25GB UINT32_C(0xfa) + /* 40Gb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_40GB UINT32_C(0x190) + /* 50Gb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_50GB UINT32_C(0x1f4) + /* 100Gb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_100GB UINT32_C(0x3e8) + /* 200Gb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_200GB UINT32_C(0x7d0) + /* 10Mb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_10MB UINT32_C(0xffff) + #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_LAST \ + HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_10MB + /* + * This value is used to identify what autoneg mode is + * used when the link speed is not being forced. + */ + uint8_t auto_mode; + /* Disable autoneg or autoneg disabled. No speeds are selected. */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_NONE UINT32_C(0x0) + /* Select all possible speeds for autoneg mode. */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ALL_SPEEDS UINT32_C(0x1) + /* + * Select only the auto_link_speed speed for autoneg mode. This mode has + * been DEPRECATED. An HWRM client should not use this mode. + */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ONE_SPEED UINT32_C(0x2) + /* + * Select the auto_link_speed or any speed below that speed for autoneg. + * This mode has been DEPRECATED. An HWRM client should not use this mode. + */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ONE_OR_BELOW UINT32_C(0x3) + /* + * Select the speeds based on the corresponding link speed mask value + * that is provided. + */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_SPEED_MASK UINT32_C(0x4) + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_LAST \ + HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_SPEED_MASK + /* + * This is the duplex setting that will be used if the autoneg_mode + * is "one_speed" or "one_or_below". + */ + uint8_t auto_duplex; + /* Half Duplex will be requested. */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_HALF UINT32_C(0x0) + /* Full duplex will be requested. */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_FULL UINT32_C(0x1) + /* Both Half and Full dupex will be requested. */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_BOTH UINT32_C(0x2) + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_LAST \ + HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_BOTH + /* + * This value is used to configure the pause that will be + * used for autonegotiation. + * Add text on the usage of auto_pause and force_pause. + */ + uint8_t auto_pause; + /* + * When this bit is '1', Generation of tx pause messages + * has been requested. Disabled otherwise. + */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_TX \ + UINT32_C(0x1) + /* + * When this bit is '1', Reception of rx pause messages + * has been requested. Disabled otherwise. + */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_RX \ + UINT32_C(0x2) + /* + * When set to 1, the advertisement of pause is enabled. + * + * # When the auto_mode is not set to none and this flag is + * set to 1, then the auto_pause bits on this port are being + * advertised and autoneg pause results are being interpreted. + * # When the auto_mode is not set to none and this + * flag is set to 0, the pause is forced as indicated in + * force_pause, and also advertised as auto_pause bits, but + * the autoneg results are not interpreted since the pause + * configuration is being forced. + * # When the auto_mode is set to none and this flag is set to + * 1, auto_pause bits should be ignored and should be set to 0. + */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_AUTONEG_PAUSE \ + UINT32_C(0x4) + uint8_t unused_0; + /* + * This is the speed that will be used if the autoneg_mode + * is "one_speed" or "one_or_below". If an unsupported speed + * is selected, an error will be generated. + */ + uint16_t auto_link_speed; + /* 100Mb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_100MB UINT32_C(0x1) + /* 1Gb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_1GB UINT32_C(0xa) + /* 2Gb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_2GB UINT32_C(0x14) + /* 25Gb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_2_5GB UINT32_C(0x19) + /* 10Gb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_10GB UINT32_C(0x64) + /* 20Mb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_20GB UINT32_C(0xc8) + /* 25Gb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_25GB UINT32_C(0xfa) + /* 40Gb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_40GB UINT32_C(0x190) + /* 50Gb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_50GB UINT32_C(0x1f4) + /* 100Gb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_100GB UINT32_C(0x3e8) + /* 200Gb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_200GB UINT32_C(0x7d0) + /* 10Mb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_10MB UINT32_C(0xffff) + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_LAST \ + HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_10MB + /* + * This is a mask of link speeds that will be used if + * autoneg_mode is "mask". If unsupported speed is enabled + * an error will be generated. + */ + uint16_t auto_link_speed_mask; + /* 100Mb link speed (Half-duplex) */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100MBHD \ + UINT32_C(0x1) + /* 100Mb link speed (Full-duplex) */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100MB \ + UINT32_C(0x2) + /* 1Gb link speed (Half-duplex) */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_1GBHD \ + UINT32_C(0x4) + /* 1Gb link speed (Full-duplex) */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_1GB \ + UINT32_C(0x8) + /* 2Gb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_2GB \ + UINT32_C(0x10) + /* 25Gb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_2_5GB \ + UINT32_C(0x20) + /* 10Gb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10GB \ + UINT32_C(0x40) + /* 20Gb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_20GB \ + UINT32_C(0x80) + /* 25Gb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_25GB \ + UINT32_C(0x100) + /* 40Gb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_40GB \ + UINT32_C(0x200) + /* 50Gb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_50GB \ + UINT32_C(0x400) + /* 100Gb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100GB \ + UINT32_C(0x800) + /* 10Mb link speed (Half-duplex) */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10MBHD \ + UINT32_C(0x1000) + /* 10Mb link speed (Full-duplex) */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10MB \ + UINT32_C(0x2000) + /* 200Gb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_200GB \ + UINT32_C(0x4000) + /* This value controls the wirespeed feature. */ + uint8_t wirespeed; + /* Wirespeed feature is disabled. */ + #define HWRM_PORT_PHY_CFG_INPUT_WIRESPEED_OFF UINT32_C(0x0) + /* Wirespeed feature is enabled. */ + #define HWRM_PORT_PHY_CFG_INPUT_WIRESPEED_ON UINT32_C(0x1) + #define HWRM_PORT_PHY_CFG_INPUT_WIRESPEED_LAST \ + HWRM_PORT_PHY_CFG_INPUT_WIRESPEED_ON + /* This value controls the loopback setting for the PHY. */ + uint8_t lpbk; + /* No loopback is selected. Normal operation. */ + #define HWRM_PORT_PHY_CFG_INPUT_LPBK_NONE UINT32_C(0x0) + /* + * The HW will be configured with local loopback such that + * host data is sent back to the host without modification. + */ + #define HWRM_PORT_PHY_CFG_INPUT_LPBK_LOCAL UINT32_C(0x1) + /* + * The HW will be configured with remote loopback such that + * port logic will send packets back out the transmitter that + * are received. + */ + #define HWRM_PORT_PHY_CFG_INPUT_LPBK_REMOTE UINT32_C(0x2) + /* + * The HW will be configured with external loopback such that + * host data is sent on the transmitter and based on the external + * loopback connection the data will be received without modification. + */ + #define HWRM_PORT_PHY_CFG_INPUT_LPBK_EXTERNAL UINT32_C(0x3) + #define HWRM_PORT_PHY_CFG_INPUT_LPBK_LAST \ + HWRM_PORT_PHY_CFG_INPUT_LPBK_EXTERNAL + /* + * This value is used to configure the pause that will be + * used for force mode. + */ + uint8_t force_pause; + /* + * When this bit is '1', Generation of tx pause messages + * is supported. Disabled otherwise. + */ + #define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAUSE_TX UINT32_C(0x1) + /* + * When this bit is '1', Reception of rx pause messages + * is supported. Disabled otherwise. + */ + #define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAUSE_RX UINT32_C(0x2) + uint8_t unused_1; + /* + * This value controls the pre-emphasis to be used for the + * link. Driver should not set this value (use + * enable.preemphasis = 0) unless driver is sure of setting. + * Normally HWRM FW will determine proper pre-emphasis. + */ + uint32_t preemphasis; + /* + * Setting for link speed mask that is used to + * advertise speeds during autonegotiation when EEE is enabled. + * This field is valid only when EEE is enabled. + * The speeds specified in this field shall be a subset of + * speeds specified in auto_link_speed_mask. + * If EEE is enabled,then at least one speed shall be provided + * in this mask. + */ + uint16_t eee_link_speed_mask; + /* Reserved */ + #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD1 \ + UINT32_C(0x1) + /* 100Mb link speed (Full-duplex) */ + #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_100MB \ + UINT32_C(0x2) + /* Reserved */ + #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD2 \ + UINT32_C(0x4) + /* 1Gb link speed (Full-duplex) */ + #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_1GB \ + UINT32_C(0x8) + /* Reserved */ + #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD3 \ + UINT32_C(0x10) + /* Reserved */ + #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD4 \ + UINT32_C(0x20) + /* 10Gb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_10GB \ + UINT32_C(0x40) + /* + * This is the speed that will be used if the force and force_pam4 + * bits are '1'. If unsupported speed is selected, an error + * will be generated. + */ + uint16_t force_pam4_link_speed; + /* 50Gb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAM4_LINK_SPEED_50GB \ + UINT32_C(0x1f4) + /* 100Gb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAM4_LINK_SPEED_100GB \ + UINT32_C(0x3e8) + /* 200Gb link speed */ + #define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAM4_LINK_SPEED_200GB \ + UINT32_C(0x7d0) + #define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAM4_LINK_SPEED_LAST \ + HWRM_PORT_PHY_CFG_INPUT_FORCE_PAM4_LINK_SPEED_200GB + /* + * Requested setting of TX LPI timer in microseconds. + * This field is valid only when EEE is enabled and TX LPI is + * enabled. + */ + uint32_t tx_lpi_timer; + #define HWRM_PORT_PHY_CFG_INPUT_TX_LPI_TIMER_MASK UINT32_C(0xffffff) + #define HWRM_PORT_PHY_CFG_INPUT_TX_LPI_TIMER_SFT 0 + uint32_t unused_3; +} __rte_packed; + +/* hwrm_port_phy_cfg_output (size:128b/16B) */ +struct hwrm_port_phy_cfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/* hwrm_port_phy_cfg_cmd_err (size:64b/8B) */ +struct hwrm_port_phy_cfg_cmd_err { + /* + * command specific error codes that goes to + * the cmd_err field in Common HWRM Error Response. + */ + uint8_t code; + /* Unknown error */ + #define HWRM_PORT_PHY_CFG_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0) + /* Unable to complete operation due to invalid speed */ + #define HWRM_PORT_PHY_CFG_CMD_ERR_CODE_ILLEGAL_SPEED UINT32_C(0x1) + /* + * retry the command since the phy is not ready. + * retry count is returned in opaque_0. + * This is only valid for the first command and + * this value will not change for successive calls. + * but if a 0 is returned at any time then this should + * be treated as an un recoverable failure, + * + * retry interval in milli seconds is returned in opaque_1. + * This specifies the time that user should wait before + * issuing the next port_phy_cfg command. + */ + #define HWRM_PORT_PHY_CFG_CMD_ERR_CODE_RETRY UINT32_C(0x2) + #define HWRM_PORT_PHY_CFG_CMD_ERR_CODE_LAST \ + HWRM_PORT_PHY_CFG_CMD_ERR_CODE_RETRY + uint8_t unused_0[7]; +} __rte_packed; + +/********************** + * hwrm_port_phy_qcfg * + **********************/ + + +/* hwrm_port_phy_qcfg_input (size:192b/24B) */ +struct hwrm_port_phy_qcfg_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* Port ID of port that is to be queried. */ + uint16_t port_id; + uint8_t unused_0[6]; +} __rte_packed; + +/* hwrm_port_phy_qcfg_output (size:768b/96B) */ +struct hwrm_port_phy_qcfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* This value indicates the current link status. */ + uint8_t link; + /* There is no link or cable detected. */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_NO_LINK UINT32_C(0x0) + /* There is no link, but a cable has been detected. */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SIGNAL UINT32_C(0x1) + /* There is a link. */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_LINK UINT32_C(0x2) + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_LAST \ + HWRM_PORT_PHY_QCFG_OUTPUT_LINK_LINK + uint8_t unused_0; + /* This value indicates the current link speed of the connection. */ + uint16_t link_speed; + /* 100Mb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_100MB UINT32_C(0x1) + /* 1Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_1GB UINT32_C(0xa) + /* 2Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_2GB UINT32_C(0x14) + /* 25Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_2_5GB UINT32_C(0x19) + /* 10Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_10GB UINT32_C(0x64) + /* 20Mb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_20GB UINT32_C(0xc8) + /* 25Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_25GB UINT32_C(0xfa) + /* 40Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_40GB UINT32_C(0x190) + /* 50Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_50GB UINT32_C(0x1f4) + /* 100Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_100GB UINT32_C(0x3e8) + /* 200Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_200GB UINT32_C(0x7d0) + /* 10Mb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_10MB UINT32_C(0xffff) + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_LAST \ + HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_10MB + /* + * This value is indicates the duplex of the current + * configuration. + */ + uint8_t duplex_cfg; + /* Half Duplex connection. */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_CFG_HALF UINT32_C(0x0) + /* Full duplex connection. */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_CFG_FULL UINT32_C(0x1) + #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_CFG_LAST \ + HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_CFG_FULL + /* + * This value is used to indicate the current + * pause configuration. When autoneg is enabled, this value + * represents the autoneg results of pause configuration. + */ + uint8_t pause; + /* + * When this bit is '1', Generation of tx pause messages + * is supported. Disabled otherwise. + */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_TX UINT32_C(0x1) + /* + * When this bit is '1', Reception of rx pause messages + * is supported. Disabled otherwise. + */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_RX UINT32_C(0x2) + /* + * The supported speeds for the port. This is a bit mask. + * For each speed that is supported, the corrresponding + * bit will be set to '1'. + */ + uint16_t support_speeds; + /* 100Mb link speed (Half-duplex) */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100MBHD \ + UINT32_C(0x1) + /* 100Mb link speed (Full-duplex) */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100MB \ + UINT32_C(0x2) + /* 1Gb link speed (Half-duplex) */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_1GBHD \ + UINT32_C(0x4) + /* 1Gb link speed (Full-duplex) */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_1GB \ + UINT32_C(0x8) + /* 2Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_2GB \ + UINT32_C(0x10) + /* 25Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_2_5GB \ + UINT32_C(0x20) + /* 10Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10GB \ + UINT32_C(0x40) + /* 20Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_20GB \ + UINT32_C(0x80) + /* 25Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_25GB \ + UINT32_C(0x100) + /* 40Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_40GB \ + UINT32_C(0x200) + /* 50Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_50GB \ + UINT32_C(0x400) + /* 100Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100GB \ + UINT32_C(0x800) + /* 10Mb link speed (Half-duplex) */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10MBHD \ + UINT32_C(0x1000) + /* 10Mb link speed (Full-duplex) */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10MB \ + UINT32_C(0x2000) + /* 200Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_200GB \ + UINT32_C(0x4000) + /* + * Current setting of forced link speed. + * When the link speed is not being forced, this + * value shall be set to 0. + */ + uint16_t force_link_speed; + /* 100Mb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_100MB UINT32_C(0x1) + /* 1Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_1GB UINT32_C(0xa) + /* 2Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_2GB UINT32_C(0x14) + /* 25Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_2_5GB UINT32_C(0x19) + /* 10Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_10GB UINT32_C(0x64) + /* 20Mb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_20GB UINT32_C(0xc8) + /* 25Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_25GB UINT32_C(0xfa) + /* 40Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_40GB \ + UINT32_C(0x190) + /* 50Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_50GB \ + UINT32_C(0x1f4) + /* 100Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_100GB \ + UINT32_C(0x3e8) + /* 200Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_200GB \ + UINT32_C(0x7d0) + /* 10Mb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_10MB \ + UINT32_C(0xffff) + #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_LAST \ + HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_10MB + /* Current setting of auto negotiation mode. */ + uint8_t auto_mode; + /* Disable autoneg or autoneg disabled. No speeds are selected. */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_NONE UINT32_C(0x0) + /* Select all possible speeds for autoneg mode. */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ALL_SPEEDS UINT32_C(0x1) + /* + * Select only the auto_link_speed speed for autoneg mode. This mode has + * been DEPRECATED. An HWRM client should not use this mode. + */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ONE_SPEED UINT32_C(0x2) + /* + * Select the auto_link_speed or any speed below that speed for autoneg. + * This mode has been DEPRECATED. An HWRM client should not use this mode. + */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ONE_OR_BELOW UINT32_C(0x3) + /* + * Select the speeds based on the corresponding link speed mask value + * that is provided. + */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_SPEED_MASK UINT32_C(0x4) + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_LAST \ + HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_SPEED_MASK + /* + * Current setting of pause autonegotiation. + * Move autoneg_pause flag here. + */ + uint8_t auto_pause; + /* + * When this bit is '1', Generation of tx pause messages + * has been requested. Disabled otherwise. + */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAUSE_TX \ + UINT32_C(0x1) + /* + * When this bit is '1', Reception of rx pause messages + * has been requested. Disabled otherwise. + */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAUSE_RX \ + UINT32_C(0x2) + /* + * When set to 1, the advertisement of pause is enabled. + * + * # When the auto_mode is not set to none and this flag is + * set to 1, then the auto_pause bits on this port are being + * advertised and autoneg pause results are being interpreted. + * # When the auto_mode is not set to none and this + * flag is set to 0, the pause is forced as indicated in + * force_pause, and also advertised as auto_pause bits, but + * the autoneg results are not interpreted since the pause + * configuration is being forced. + * # When the auto_mode is set to none and this flag is set to + * 1, auto_pause bits should be ignored and should be set to 0. + */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAUSE_AUTONEG_PAUSE \ + UINT32_C(0x4) + /* + * Current setting for auto_link_speed. This field is only + * valid when auto_mode is set to "one_speed" or "one_or_below". + */ + uint16_t auto_link_speed; + /* 100Mb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_100MB UINT32_C(0x1) + /* 1Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_1GB UINT32_C(0xa) + /* 2Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_2GB UINT32_C(0x14) + /* 25Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_2_5GB UINT32_C(0x19) + /* 10Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_10GB UINT32_C(0x64) + /* 20Mb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_20GB UINT32_C(0xc8) + /* 25Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_25GB UINT32_C(0xfa) + /* 40Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_40GB UINT32_C(0x190) + /* 50Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_50GB UINT32_C(0x1f4) + /* 100Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_100GB UINT32_C(0x3e8) + /* 200Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_200GB UINT32_C(0x7d0) + /* 10Mb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_10MB \ + UINT32_C(0xffff) + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_LAST \ + HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_10MB + /* + * Current setting for auto_link_speed_mask that is used to + * advertise speeds during autonegotiation. + * This field is only valid when auto_mode is set to "mask". + * The speeds specified in this field shall be a subset of + * supported speeds on this port. + */ + uint16_t auto_link_speed_mask; + /* 100Mb link speed (Half-duplex) */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100MBHD \ + UINT32_C(0x1) + /* 100Mb link speed (Full-duplex) */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100MB \ + UINT32_C(0x2) + /* 1Gb link speed (Half-duplex) */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_1GBHD \ + UINT32_C(0x4) + /* 1Gb link speed (Full-duplex) */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_1GB \ + UINT32_C(0x8) + /* 2Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_2GB \ + UINT32_C(0x10) + /* 25Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_2_5GB \ + UINT32_C(0x20) + /* 10Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10GB \ + UINT32_C(0x40) + /* 20Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_20GB \ + UINT32_C(0x80) + /* 25Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_25GB \ + UINT32_C(0x100) + /* 40Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_40GB \ + UINT32_C(0x200) + /* 50Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_50GB \ + UINT32_C(0x400) + /* 100Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100GB \ + UINT32_C(0x800) + /* 10Mb link speed (Half-duplex) */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10MBHD \ + UINT32_C(0x1000) + /* 10Mb link speed (Full-duplex) */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10MB \ + UINT32_C(0x2000) + /* 200Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_200GB \ + UINT32_C(0x4000) + /* Current setting for wirespeed. */ + uint8_t wirespeed; + /* Wirespeed feature is disabled. */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_WIRESPEED_OFF UINT32_C(0x0) + /* Wirespeed feature is enabled. */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_WIRESPEED_ON UINT32_C(0x1) + #define HWRM_PORT_PHY_QCFG_OUTPUT_WIRESPEED_LAST \ + HWRM_PORT_PHY_QCFG_OUTPUT_WIRESPEED_ON + /* Current setting for loopback. */ + uint8_t lpbk; + /* No loopback is selected. Normal operation. */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_NONE UINT32_C(0x0) + /* + * The HW will be configured with local loopback such that + * host data is sent back to the host without modification. + */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_LOCAL UINT32_C(0x1) + /* + * The HW will be configured with remote loopback such that + * port logic will send packets back out the transmitter that + * are received. + */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_REMOTE UINT32_C(0x2) + /* + * The HW will be configured with external loopback such that + * host data is sent on the transmitter and based on the external + * loopback connection the data will be received without modification. + */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_EXTERNAL UINT32_C(0x3) + #define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_LAST \ + HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_EXTERNAL + /* + * Current setting of forced pause. + * When the pause configuration is not being forced, then + * this value shall be set to 0. + */ + uint8_t force_pause; + /* + * When this bit is '1', Generation of tx pause messages + * is supported. Disabled otherwise. + */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_PAUSE_TX UINT32_C(0x1) + /* + * When this bit is '1', Reception of rx pause messages + * is supported. Disabled otherwise. + */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_PAUSE_RX UINT32_C(0x2) + /* + * This value indicates the current status of the optics module on + * this port. + */ + uint8_t module_status; + /* Module is inserted and accepted */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NONE \ UINT32_C(0x0) - /* PBL pointer points to PTE table. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_LVL_1 \ + /* Module is rejected and transmit side Laser is disabled. */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_DISABLETX \ + UINT32_C(0x1) + /* Module mismatch warning. */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_WARNINGMSG \ + UINT32_C(0x2) + /* Module is rejected and powered down. */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_PWRDOWN \ + UINT32_C(0x3) + /* Module is not inserted. */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NOTINSERTED \ + UINT32_C(0x4) + /* Module is powered down because of over current fault. */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_CURRENTFAULT \ + UINT32_C(0x5) + /* Module status is not applicable. */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NOTAPPLICABLE \ + UINT32_C(0xff) + #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_LAST \ + HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NOTAPPLICABLE + /* Current setting for preemphasis. */ + uint32_t preemphasis; + /* This field represents the major version of the PHY. */ + uint8_t phy_maj; + /* This field represents the minor version of the PHY. */ + uint8_t phy_min; + /* This field represents the build version of the PHY. */ + uint8_t phy_bld; + /* This value represents a PHY type. */ + uint8_t phy_type; + /* Unknown */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_UNKNOWN \ + UINT32_C(0x0) + /* BASE-CR */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASECR \ + UINT32_C(0x1) + /* BASE-KR4 (Deprecated) */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR4 \ + UINT32_C(0x2) + /* BASE-LR */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASELR \ + UINT32_C(0x3) + /* BASE-SR */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASESR \ + UINT32_C(0x4) + /* BASE-KR2 (Deprecated) */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR2 \ + UINT32_C(0x5) + /* BASE-KX */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKX \ + UINT32_C(0x6) + /* BASE-KR */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR \ + UINT32_C(0x7) + /* BASE-T */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASET \ + UINT32_C(0x8) + /* EEE capable BASE-T */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASETE \ + UINT32_C(0x9) + /* SGMII connected external PHY */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_SGMIIEXTPHY \ + UINT32_C(0xa) + /* 25G_BASECR_CA_L */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASECR_CA_L \ + UINT32_C(0xb) + /* 25G_BASECR_CA_S */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASECR_CA_S \ + UINT32_C(0xc) + /* 25G_BASECR_CA_N */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASECR_CA_N \ + UINT32_C(0xd) + /* 25G_BASESR */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASESR \ + UINT32_C(0xe) + /* 100G_BASECR4 */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASECR4 \ + UINT32_C(0xf) + /* 100G_BASESR4 */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASESR4 \ + UINT32_C(0x10) + /* 100G_BASELR4 */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASELR4 \ + UINT32_C(0x11) + /* 100G_BASEER4 */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASEER4 \ + UINT32_C(0x12) + /* 100G_BASESR10 */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASESR10 \ + UINT32_C(0x13) + /* 40G_BASECR4 */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASECR4 \ + UINT32_C(0x14) + /* 40G_BASESR4 */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASESR4 \ + UINT32_C(0x15) + /* 40G_BASELR4 */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASELR4 \ + UINT32_C(0x16) + /* 40G_BASEER4 */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASEER4 \ + UINT32_C(0x17) + /* 40G_ACTIVE_CABLE */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_ACTIVE_CABLE \ + UINT32_C(0x18) + /* 1G_baseT */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_1G_BASET \ + UINT32_C(0x19) + /* 1G_baseSX */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_1G_BASESX \ + UINT32_C(0x1a) + /* 1G_baseCX */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_1G_BASECX \ + UINT32_C(0x1b) + /* 100G_BASECR4 */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_200G_BASECR4 \ + UINT32_C(0x1c) + /* 100G_BASESR4 */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_200G_BASESR4 \ + UINT32_C(0x1d) + /* 100G_BASELR4 */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_200G_BASELR4 \ + UINT32_C(0x1e) + /* 100G_BASEER4 */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_200G_BASEER4 \ + UINT32_C(0x1f) + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_LAST \ + HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_200G_BASEER4 + /* This value represents a media type. */ + uint8_t media_type; + /* Unknown */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_UNKNOWN UINT32_C(0x0) + /* Twisted Pair */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_TP UINT32_C(0x1) + /* Direct Attached Copper */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_DAC UINT32_C(0x2) + /* Fiber */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_FIBRE UINT32_C(0x3) + #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_LAST \ + HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_FIBRE + /* This value represents a transceiver type. */ + uint8_t xcvr_pkg_type; + /* PHY and MAC are in the same package */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_XCVR_INTERNAL \ UINT32_C(0x1) - /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_LVL_2 \ + /* PHY and MAC are in different packages */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_XCVR_EXTERNAL \ UINT32_C(0x2) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_LAST \ - HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_LVL_2 - /* TQM ring 0 page size. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_MASK \ - UINT32_C(0xf0) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_SFT 4 - /* 4KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_4K \ - (UINT32_C(0x0) << 4) - /* 8KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_8K \ - (UINT32_C(0x1) << 4) - /* 64KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_64K \ - (UINT32_C(0x2) << 4) - /* 2MB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_2M \ - (UINT32_C(0x3) << 4) - /* 8MB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_8M \ - (UINT32_C(0x4) << 4) - /* 1GB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_1G \ - (UINT32_C(0x5) << 4) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_LAST \ - HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_1G - /* TQM ring 1 page size and level. */ - uint8_t tqm_ring1_pg_size_tqm_ring1_lvl; - /* TQM ring 1 PBL indirect levels. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_MASK \ - UINT32_C(0xf) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_SFT 0 - /* PBL pointer is physical start address. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_LVL_0 \ + #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_LAST \ + HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_XCVR_EXTERNAL + uint8_t eee_config_phy_addr; + /* This field represents PHY address. */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_ADDR_MASK \ + UINT32_C(0x1f) + #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_ADDR_SFT 0 + /* + * This field represents flags related to EEE configuration. + * These EEE configuration flags are valid only when the + * auto_mode is not set to none (in other words autonegotiation + * is enabled). + */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_MASK \ + UINT32_C(0xe0) + #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_SFT 5 + /* + * When set to 1, Energy Efficient Ethernet (EEE) mode is enabled. + * Speeds for autoneg with EEE mode enabled + * are based on eee_link_speed_mask. + */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_ENABLED \ + UINT32_C(0x20) + /* + * This flag is valid only when eee_enabled is set to 1. + * + * # If eee_enabled is set to 0, then EEE mode is disabled + * and this flag shall be ignored. + * # If eee_enabled is set to 1 and this flag is set to 1, + * then Energy Efficient Ethernet (EEE) mode is enabled + * and in use. + * # If eee_enabled is set to 1 and this flag is set to 0, + * then Energy Efficient Ethernet (EEE) mode is enabled + * but is currently not in use. + */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_ACTIVE \ + UINT32_C(0x40) + /* + * This flag is valid only when eee_enabled is set to 1. + * + * # If eee_enabled is set to 0, then EEE mode is disabled + * and this flag shall be ignored. + * # If eee_enabled is set to 1 and this flag is set to 1, + * then Energy Efficient Ethernet (EEE) mode is enabled + * and TX LPI is enabled. + * # If eee_enabled is set to 1 and this flag is set to 0, + * then Energy Efficient Ethernet (EEE) mode is enabled + * but TX LPI is disabled. + */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_TX_LPI \ + UINT32_C(0x80) + /* + * When set to 1, the parallel detection is used to determine + * the speed of the link partner. + * + * Parallel detection is used when a autonegotiation capable + * device is connected to a link parter that is not capable + * of autonegotiation. + */ + uint8_t parallel_detect; + /* + * When set to 1, the parallel detection is used to determine + * the speed of the link partner. + * + * Parallel detection is used when a autonegotiation capable + * device is connected to a link parter that is not capable + * of autonegotiation. + */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_PARALLEL_DETECT UINT32_C(0x1) + /* + * The advertised speeds for the port by the link partner. + * Each advertised speed will be set to '1'. + */ + uint16_t link_partner_adv_speeds; + /* 100Mb link speed (Half-duplex) */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100MBHD \ + UINT32_C(0x1) + /* 100Mb link speed (Full-duplex) */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100MB \ + UINT32_C(0x2) + /* 1Gb link speed (Half-duplex) */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_1GBHD \ + UINT32_C(0x4) + /* 1Gb link speed (Full-duplex) */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_1GB \ + UINT32_C(0x8) + /* 2Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_2GB \ + UINT32_C(0x10) + /* 25Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_2_5GB \ + UINT32_C(0x20) + /* 10Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10GB \ + UINT32_C(0x40) + /* 20Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_20GB \ + UINT32_C(0x80) + /* 25Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_25GB \ + UINT32_C(0x100) + /* 40Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_40GB \ + UINT32_C(0x200) + /* 50Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_50GB \ + UINT32_C(0x400) + /* 100Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100GB \ + UINT32_C(0x800) + /* 10Mb link speed (Half-duplex) */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10MBHD \ + UINT32_C(0x1000) + /* 10Mb link speed (Full-duplex) */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10MB \ + UINT32_C(0x2000) + /* + * The advertised autoneg for the port by the link partner. + * This field is deprecated and should be set to 0. + */ + uint8_t link_partner_adv_auto_mode; + /* Disable autoneg or autoneg disabled. No speeds are selected. */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_NONE \ UINT32_C(0x0) - /* PBL pointer points to PTE table. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_LVL_1 \ + /* Select all possible speeds for autoneg mode. */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ALL_SPEEDS \ + UINT32_C(0x1) + /* + * Select only the auto_link_speed speed for autoneg mode. This mode has + * been DEPRECATED. An HWRM client should not use this mode. + */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ONE_SPEED \ + UINT32_C(0x2) + /* + * Select the auto_link_speed or any speed below that speed for autoneg. + * This mode has been DEPRECATED. An HWRM client should not use this mode. + */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ONE_OR_BELOW \ + UINT32_C(0x3) + /* + * Select the speeds based on the corresponding link speed mask value + * that is provided. + */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_SPEED_MASK \ + UINT32_C(0x4) + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_LAST \ + HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_SPEED_MASK + /* The advertised pause settings on the port by the link partner. */ + uint8_t link_partner_adv_pause; + /* + * When this bit is '1', Generation of tx pause messages + * is supported. Disabled otherwise. + */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_PAUSE_TX \ + UINT32_C(0x1) + /* + * When this bit is '1', Reception of rx pause messages + * is supported. Disabled otherwise. + */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_PAUSE_RX \ + UINT32_C(0x2) + /* + * Current setting for link speed mask that is used to + * advertise speeds during autonegotiation when EEE is enabled. + * This field is valid only when eee_enabled flags is set to 1. + * The speeds specified in this field shall be a subset of + * speeds specified in auto_link_speed_mask. + */ + uint16_t adv_eee_link_speed_mask; + /* Reserved */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD1 \ + UINT32_C(0x1) + /* 100Mb link speed (Full-duplex) */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_100MB \ + UINT32_C(0x2) + /* Reserved */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD2 \ + UINT32_C(0x4) + /* 1Gb link speed (Full-duplex) */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_1GB \ + UINT32_C(0x8) + /* Reserved */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD3 \ + UINT32_C(0x10) + /* Reserved */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD4 \ + UINT32_C(0x20) + /* 10Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_10GB \ + UINT32_C(0x40) + /* + * Current setting for link speed mask that is advertised by + * the link partner when EEE is enabled. + * This field is valid only when eee_enabled flags is set to 1. + */ + uint16_t link_partner_adv_eee_link_speed_mask; + /* Reserved */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD1 \ UINT32_C(0x1) - /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_LVL_2 \ + /* 100Mb link speed (Full-duplex) */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_100MB \ UINT32_C(0x2) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_LAST \ - HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_LVL_2 - /* TQM ring 1 page size. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_MASK \ - UINT32_C(0xf0) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_SFT 4 - /* 4KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_4K \ - (UINT32_C(0x0) << 4) - /* 8KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_8K \ - (UINT32_C(0x1) << 4) - /* 64KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_64K \ - (UINT32_C(0x2) << 4) - /* 2MB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_2M \ - (UINT32_C(0x3) << 4) - /* 8MB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_8M \ - (UINT32_C(0x4) << 4) - /* 1GB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_1G \ - (UINT32_C(0x5) << 4) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_LAST \ - HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_1G - /* TQM ring 2 page size and level. */ - uint8_t tqm_ring2_pg_size_tqm_ring2_lvl; - /* TQM ring 2 PBL indirect levels. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_MASK \ - UINT32_C(0xf) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_SFT 0 - /* PBL pointer is physical start address. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_LVL_0 \ - UINT32_C(0x0) - /* PBL pointer points to PTE table. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_LVL_1 \ + /* Reserved */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD2 \ + UINT32_C(0x4) + /* 1Gb link speed (Full-duplex) */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_1GB \ + UINT32_C(0x8) + /* Reserved */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD3 \ + UINT32_C(0x10) + /* Reserved */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD4 \ + UINT32_C(0x20) + /* 10Gb link speed */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_10GB \ + UINT32_C(0x40) + uint32_t xcvr_identifier_type_tx_lpi_timer; + /* + * Current setting of TX LPI timer in microseconds. + * This field is valid only when_eee_enabled flag is set to 1 + * and tx_lpi_enabled is set to 1. + */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_TX_LPI_TIMER_MASK \ + UINT32_C(0xffffff) + #define HWRM_PORT_PHY_QCFG_OUTPUT_TX_LPI_TIMER_SFT 0 + /* This value represents transceiver identifier type. */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_MASK \ + UINT32_C(0xff000000) + #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_SFT 24 + /* Unknown */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_UNKNOWN \ + (UINT32_C(0x0) << 24) + /* SFP/SFP+/SFP28 */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_SFP \ + (UINT32_C(0x3) << 24) + /* QSFP+ */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP \ + (UINT32_C(0xc) << 24) + /* QSFP+ */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFPPLUS \ + (UINT32_C(0xd) << 24) + /* QSFP28 */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP28 \ + (UINT32_C(0x11) << 24) + #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_LAST \ + HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP28 + /* + * This value represents the current configuration of + * Forward Error Correction (FEC) on the port. + */ + uint16_t fec_cfg; + /* + * When set to 1, then FEC is not supported on this port. If this flag + * is set to 1, then all other FEC configuration flags shall be ignored. + * When set to 0, then FEC is supported as indicated by other + * configuration flags. + * If no cable is attached and the HWRM does not yet know the FEC + * capability, then the HWRM shall set this flag to 1 when reporting + * FEC capability. + */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_NONE_SUPPORTED \ UINT32_C(0x1) - /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_LVL_2 \ + /* + * When set to 1, then FEC autonegotiation is supported on this port. + * When set to 0, then FEC autonegotiation is not supported on this port. + */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_AUTONEG_SUPPORTED \ UINT32_C(0x2) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_LAST \ - HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_LVL_2 - /* TQM ring 2 page size. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_MASK \ - UINT32_C(0xf0) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_SFT 4 - /* 4KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_4K \ - (UINT32_C(0x0) << 4) - /* 8KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_8K \ - (UINT32_C(0x1) << 4) - /* 64KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_64K \ - (UINT32_C(0x2) << 4) - /* 2MB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_2M \ - (UINT32_C(0x3) << 4) - /* 8MB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_8M \ - (UINT32_C(0x4) << 4) - /* 1GB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_1G \ - (UINT32_C(0x5) << 4) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_LAST \ - HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_1G - /* TQM ring 3 page size and level. */ - uint8_t tqm_ring3_pg_size_tqm_ring3_lvl; - /* TQM ring 3 PBL indirect levels. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_MASK \ - UINT32_C(0xf) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_SFT 0 - /* PBL pointer is physical start address. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_LVL_0 \ - UINT32_C(0x0) - /* PBL pointer points to PTE table. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_LVL_1 \ + /* + * When set to 1, then FEC autonegotiation is enabled on this port. + * When set to 0, then FEC autonegotiation is disabled if supported. + * This flag should be ignored if FEC autonegotiation is not supported on this port. + */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_AUTONEG_ENABLED \ + UINT32_C(0x4) + /* + * When set to 1, then FEC CLAUSE 74 (Fire Code) is supported on this port. + * When set to 0, then FEC CLAUSE 74 (Fire Code) is not supported on this port. + */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE74_SUPPORTED \ + UINT32_C(0x8) + /* + * When set to 1, then FEC CLAUSE 74 (Fire Code) is enabled on this port. + * When set to 0, then FEC CLAUSE 74 (Fire Code) is disabled if supported. + * This flag should be ignored if FEC CLAUSE 74 is not supported on this port. + */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE74_ENABLED \ + UINT32_C(0x10) + /* + * When set to 1, then FEC CLAUSE 91 (Reed Solomon) is supported on this port. + * When set to 0, then FEC CLAUSE 91 (Reed Solomon) is not supported on this port. + */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_SUPPORTED \ + UINT32_C(0x20) + /* + * When set to 1, then FEC CLAUSE 91 (Reed Solomon) is enabled on this port. + * When set to 0, then FEC CLAUSE 91 (Reed Solomon) is disabled if supported. + * This flag should be ignored if FEC CLAUSE 91 is not supported on this port. + */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_ENABLED \ + UINT32_C(0x40) + /* + * This value is indicates the duplex of the current + * connection state. + */ + uint8_t duplex_state; + /* Half Duplex connection. */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_STATE_HALF UINT32_C(0x0) + /* Full duplex connection. */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_STATE_FULL UINT32_C(0x1) + #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_STATE_LAST \ + HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_STATE_FULL + /* Option flags fields. */ + uint8_t option_flags; + /* When this bit is '1', Media auto detect is enabled. */ + #define HWRM_PORT_PHY_QCFG_OUTPUT_OPTION_FLAGS_MEDIA_AUTO_DETECT \ UINT32_C(0x1) - /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_LVL_2 \ - UINT32_C(0x2) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_LAST \ - HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_LVL_2 - /* TQM ring 3 page size. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_MASK \ - UINT32_C(0xf0) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_SFT 4 - /* 4KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_4K \ - (UINT32_C(0x0) << 4) - /* 8KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_8K \ - (UINT32_C(0x1) << 4) - /* 64KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_64K \ - (UINT32_C(0x2) << 4) - /* 2MB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_2M \ - (UINT32_C(0x3) << 4) - /* 8MB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_8M \ - (UINT32_C(0x4) << 4) - /* 1GB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_1G \ - (UINT32_C(0x5) << 4) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_LAST \ - HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_1G - /* TQM ring 4 page size and level. */ - uint8_t tqm_ring4_pg_size_tqm_ring4_lvl; - /* TQM ring 4 PBL indirect levels. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_MASK \ - UINT32_C(0xf) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_SFT 0 - /* PBL pointer is physical start address. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_LVL_0 \ - UINT32_C(0x0) - /* PBL pointer points to PTE table. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_LVL_1 \ + /* + * Up to 16 bytes of null padded ASCII string representing + * PHY vendor. + * If the string is set to null, then the vendor name is not + * available. + */ + char phy_vendor_name[16]; + /* + * Up to 16 bytes of null padded ASCII string that + * identifies vendor specific part number of the PHY. + * If the string is set to null, then the vendor specific + * part number is not available. + */ + char phy_vendor_partnumber[16]; + uint8_t unused_2[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/********************* + * hwrm_port_mac_cfg * + *********************/ + + +/* hwrm_port_mac_cfg_input (size:384b/48B) */ +struct hwrm_port_mac_cfg_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* + * In this field, there are a number of CoS mappings related flags + * that are used to configure CoS mappings and their corresponding + * priorities in the hardware. + * For the priorities of CoS mappings, the HWRM uses the following + * priority order (high to low) by default: + * # vlan pri + * # ip_dscp + * # tunnel_vlan_pri + * # default cos + * + * A subset of CoS mappings can be enabled. + * If a priority is not specified for an enabled CoS mapping, the + * priority will be assigned in the above order for the enabled CoS + * mappings. For example, if vlan_pri and ip_dscp CoS mappings are + * enabled and their priorities are not specified, the following + * priority order (high to low) will be used by the HWRM: + * # vlan_pri + * # ip_dscp + * # default cos + * + * vlan_pri CoS mapping together with default CoS with lower priority + * are enabled by default by the HWRM. + */ + uint32_t flags; + /* + * When this bit is '1', this command will configure + * the MAC to match the current link state of the PHY. + * If the link is not established on the PHY, then this + * bit has no effect. + */ + #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_MATCH_LINK \ UINT32_C(0x1) - /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_LVL_2 \ + /* + * When this bit is set to '1', the inner VLAN PRI to CoS mapping + * is requested to be enabled. + */ + #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_VLAN_PRI2COS_ENABLE \ UINT32_C(0x2) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_LAST \ - HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_LVL_2 - /* TQM ring 4 page size. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_MASK \ - UINT32_C(0xf0) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_SFT 4 - /* 4KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_4K \ - (UINT32_C(0x0) << 4) - /* 8KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_8K \ - (UINT32_C(0x1) << 4) - /* 64KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_64K \ - (UINT32_C(0x2) << 4) - /* 2MB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_2M \ - (UINT32_C(0x3) << 4) - /* 8MB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_8M \ - (UINT32_C(0x4) << 4) - /* 1GB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_1G \ - (UINT32_C(0x5) << 4) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_LAST \ - HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_1G - /* TQM ring 5 page size and level. */ - uint8_t tqm_ring5_pg_size_tqm_ring5_lvl; - /* TQM ring 5 PBL indirect levels. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_MASK \ - UINT32_C(0xf) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_SFT 0 - /* PBL pointer is physical start address. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_LVL_0 \ - UINT32_C(0x0) - /* PBL pointer points to PTE table. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_LVL_1 \ + /* + * When this bit is set to '1', tunnel VLAN PRI field to + * CoS mapping is requested to be enabled. + */ + #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_TUNNEL_PRI2COS_ENABLE \ + UINT32_C(0x4) + /* + * When this bit is set to '1', the IP DSCP to CoS mapping is + * requested to be enabled. + */ + #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_IP_DSCP2COS_ENABLE \ + UINT32_C(0x8) + /* + * When this bit is '1', the HWRM is requested to + * enable timestamp capture capability on the receive side + * of this port. + */ + #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_PTP_RX_TS_CAPTURE_ENABLE \ + UINT32_C(0x10) + /* + * When this bit is '1', the HWRM is requested to + * disable timestamp capture capability on the receive side + * of this port. + */ + #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_PTP_RX_TS_CAPTURE_DISABLE \ + UINT32_C(0x20) + /* + * When this bit is '1', the HWRM is requested to + * enable timestamp capture capability on the transmit side + * of this port. + */ + #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_PTP_TX_TS_CAPTURE_ENABLE \ + UINT32_C(0x40) + /* + * When this bit is '1', the HWRM is requested to + * disable timestamp capture capability on the transmit side + * of this port. + */ + #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_PTP_TX_TS_CAPTURE_DISABLE \ + UINT32_C(0x80) + /* + * When this bit is '1', the Out-Of-Box WoL is requested to + * be enabled on this port. + */ + #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_OOB_WOL_ENABLE \ + UINT32_C(0x100) + /* + * When this bit is '1', the Out-Of-Box WoL is requested to + * be disabled on this port. + */ + #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_OOB_WOL_DISABLE \ + UINT32_C(0x200) + /* + * When this bit is set to '1', the inner VLAN PRI to CoS mapping + * is requested to be disabled. + */ + #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_VLAN_PRI2COS_DISABLE \ + UINT32_C(0x400) + /* + * When this bit is set to '1', tunnel VLAN PRI field to + * CoS mapping is requested to be disabled. + */ + #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_TUNNEL_PRI2COS_DISABLE \ + UINT32_C(0x800) + /* + * When this bit is set to '1', the IP DSCP to CoS mapping is + * requested to be disabled. + */ + #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_IP_DSCP2COS_DISABLE \ + UINT32_C(0x1000) + /* + * When this bit is set to '1', and the ptp_tx_ts_capture_enable + * bit is set, then the device uses one step Tx timestamping. + * This bit is temporary and used for experimental purposes. + */ + #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_PTP_ONE_STEP_TX_TS \ + UINT32_C(0x2000) + uint32_t enables; + /* + * This bit must be '1' for the ipg field to be + * configured. + */ + #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_IPG \ UINT32_C(0x1) - /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_LVL_2 \ + /* + * This bit must be '1' for the lpbk field to be + * configured. + */ + #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_LPBK \ UINT32_C(0x2) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_LAST \ - HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_LVL_2 - /* TQM ring 5 page size. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_MASK \ - UINT32_C(0xf0) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_SFT 4 - /* 4KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_4K \ - (UINT32_C(0x0) << 4) - /* 8KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_8K \ - (UINT32_C(0x1) << 4) - /* 64KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_64K \ - (UINT32_C(0x2) << 4) - /* 2MB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_2M \ - (UINT32_C(0x3) << 4) - /* 8MB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_8M \ - (UINT32_C(0x4) << 4) - /* 1GB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_1G \ - (UINT32_C(0x5) << 4) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_LAST \ - HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_1G - /* TQM ring 6 page size and level. */ - uint8_t tqm_ring6_pg_size_tqm_ring6_lvl; - /* TQM ring 6 PBL indirect levels. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_MASK \ - UINT32_C(0xf) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_SFT 0 - /* PBL pointer is physical start address. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_LVL_0 \ - UINT32_C(0x0) - /* PBL pointer points to PTE table. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_LVL_1 \ + /* + * This bit must be '1' for the vlan_pri2cos_map_pri field to be + * configured. + */ + #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_VLAN_PRI2COS_MAP_PRI \ + UINT32_C(0x4) + /* + * This bit must be '1' for the tunnel_pri2cos_map_pri field to be + * configured. + */ + #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_TUNNEL_PRI2COS_MAP_PRI \ + UINT32_C(0x10) + /* + * This bit must be '1' for the dscp2cos_map_pri field to be + * configured. + */ + #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_DSCP2COS_MAP_PRI \ + UINT32_C(0x20) + /* + * This bit must be '1' for the rx_ts_capture_ptp_msg_type field to be + * configured. + */ + #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_RX_TS_CAPTURE_PTP_MSG_TYPE \ + UINT32_C(0x40) + /* + * This bit must be '1' for the tx_ts_capture_ptp_msg_type field to be + * configured. + */ + #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_TX_TS_CAPTURE_PTP_MSG_TYPE \ + UINT32_C(0x80) + /* + * This bit must be '1' for the cos_field_cfg field to be + * configured. + */ + #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_COS_FIELD_CFG \ + UINT32_C(0x100) + /* + * This bit must be '1' for the ptp_freq_adj_ppb field to be + * configured. + */ + #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_PTP_FREQ_ADJ_PPB \ + UINT32_C(0x200) + /* Port ID of port that is to be configured. */ + uint16_t port_id; + /* + * This value is used to configure the minimum IPG that will + * be sent between packets by this port. + */ + uint8_t ipg; + /* This value controls the loopback setting for the MAC. */ + uint8_t lpbk; + /* No loopback is selected. Normal operation. */ + #define HWRM_PORT_MAC_CFG_INPUT_LPBK_NONE UINT32_C(0x0) + /* + * The HW will be configured with local loopback such that + * host data is sent back to the host without modification. + */ + #define HWRM_PORT_MAC_CFG_INPUT_LPBK_LOCAL UINT32_C(0x1) + /* + * The HW will be configured with remote loopback such that + * port logic will send packets back out the transmitter that + * are received. + */ + #define HWRM_PORT_MAC_CFG_INPUT_LPBK_REMOTE UINT32_C(0x2) + #define HWRM_PORT_MAC_CFG_INPUT_LPBK_LAST \ + HWRM_PORT_MAC_CFG_INPUT_LPBK_REMOTE + /* + * This value controls the priority setting of VLAN PRI to CoS + * mapping based on VLAN Tags of inner packet headers of + * tunneled packets or packet headers of non-tunneled packets. + * + * # Each XXX_pri variable shall have a unique priority value + * when it is being specified. + * # When comparing priorities of mappings, higher value + * indicates higher priority. + * For example, a value of 0-3 is returned where 0 is being + * the lowest priority and 3 is being the highest priority. + */ + uint8_t vlan_pri2cos_map_pri; + /* Reserved field. */ + uint8_t reserved1; + /* + * This value controls the priority setting of VLAN PRI to CoS + * mapping based on VLAN Tags of tunneled header. + * This mapping only applies when tunneled headers + * are present. + * + * # Each XXX_pri variable shall have a unique priority value + * when it is being specified. + * # When comparing priorities of mappings, higher value + * indicates higher priority. + * For example, a value of 0-3 is returned where 0 is being + * the lowest priority and 3 is being the highest priority. + */ + uint8_t tunnel_pri2cos_map_pri; + /* + * This value controls the priority setting of IP DSCP to CoS + * mapping based on inner IP header of tunneled packets or + * IP header of non-tunneled packets. + * + * # Each XXX_pri variable shall have a unique priority value + * when it is being specified. + * # When comparing priorities of mappings, higher value + * indicates higher priority. + * For example, a value of 0-3 is returned where 0 is being + * the lowest priority and 3 is being the highest priority. + */ + uint8_t dscp2pri_map_pri; + /* + * This is a 16-bit bit mask that is used to request a + * specific configuration of time stamp capture of PTP messages + * on the receive side of this port. + * This field shall be ignored if the ptp_rx_ts_capture_enable + * flag is not set in this command. + * Otherwise, if bit 'i' is set, then the HWRM is being + * requested to configure the receive side of the port to + * capture the time stamp of every received PTP message + * with messageType field value set to i. + */ + uint16_t rx_ts_capture_ptp_msg_type; + /* + * This is a 16-bit bit mask that is used to request a + * specific configuration of time stamp capture of PTP messages + * on the transmit side of this port. + * This field shall be ignored if the ptp_tx_ts_capture_enable + * flag is not set in this command. + * Otherwise, if bit 'i' is set, then the HWRM is being + * requested to configure the transmit side of the port to + * capture the time stamp of every transmitted PTP message + * with messageType field value set to i. + */ + uint16_t tx_ts_capture_ptp_msg_type; + /* Configuration of CoS fields. */ + uint8_t cos_field_cfg; + /* Reserved */ + #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_RSVD1 \ UINT32_C(0x1) - /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_LVL_2 \ - UINT32_C(0x2) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_LAST \ - HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_LVL_2 - /* TQM ring 6 page size. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_MASK \ - UINT32_C(0xf0) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_SFT 4 - /* 4KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_4K \ - (UINT32_C(0x0) << 4) - /* 8KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_8K \ - (UINT32_C(0x1) << 4) - /* 64KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_64K \ - (UINT32_C(0x2) << 4) - /* 2MB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_2M \ - (UINT32_C(0x3) << 4) - /* 8MB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_8M \ - (UINT32_C(0x4) << 4) - /* 1GB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_1G \ - (UINT32_C(0x5) << 4) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_LAST \ - HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_1G - /* TQM ring 7 page size and level. */ - uint8_t tqm_ring7_pg_size_tqm_ring7_lvl; - /* TQM ring 7 PBL indirect levels. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_MASK \ - UINT32_C(0xf) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_SFT 0 - /* PBL pointer is physical start address. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_LVL_0 \ - UINT32_C(0x0) - /* PBL pointer points to PTE table. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_LVL_1 \ + /* + * This field is used to specify selection of VLAN PRI value + * based on whether one or two VLAN Tags are present in + * the inner packet headers of tunneled packets or + * non-tunneled packets. + * This field is valid only if inner VLAN PRI to CoS mapping + * is enabled. + * If VLAN PRI to CoS mapping is not enabled, then this + * field shall be ignored. + */ + #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_MASK \ + UINT32_C(0x6) + #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_SFT \ + 1 + /* + * Select inner VLAN PRI when 1 or 2 VLAN Tags are + * present in the inner packet headers + */ + #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_INNERMOST \ + (UINT32_C(0x0) << 1) + /* + * Select outer VLAN Tag PRI when 2 VLAN Tags are + * present in the inner packet headers. + * No VLAN PRI shall be selected for this configuration + * if only one VLAN Tag is present in the inner + * packet headers. + */ + #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_OUTER \ + (UINT32_C(0x1) << 1) + /* + * Select outermost VLAN PRI when 1 or 2 VLAN Tags + * are present in the inner packet headers + */ + #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_OUTERMOST \ + (UINT32_C(0x2) << 1) + /* Unspecified */ + #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_UNSPECIFIED \ + (UINT32_C(0x3) << 1) + #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_LAST \ + HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_UNSPECIFIED + /* + * This field is used to specify selection of tunnel VLAN + * PRI value based on whether one or two VLAN Tags are + * present in tunnel headers. + * This field is valid only if tunnel VLAN PRI to CoS mapping + * is enabled. + * If tunnel VLAN PRI to CoS mapping is not enabled, then this + * field shall be ignored. + */ + #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_MASK \ + UINT32_C(0x18) + #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_SFT \ + 3 + /* + * Select inner VLAN PRI when 1 or 2 VLAN Tags are + * present in the tunnel packet headers + */ + #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_INNERMOST \ + (UINT32_C(0x0) << 3) + /* + * Select outer VLAN Tag PRI when 2 VLAN Tags are + * present in the tunnel packet headers. + * No tunnel VLAN PRI shall be selected for this + * configuration if only one VLAN Tag is present in + * the tunnel packet headers. + */ + #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_OUTER \ + (UINT32_C(0x1) << 3) + /* + * Select outermost VLAN PRI when 1 or 2 VLAN Tags + * are present in the tunnel packet headers + */ + #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_OUTERMOST \ + (UINT32_C(0x2) << 3) + /* Unspecified */ + #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_UNSPECIFIED \ + (UINT32_C(0x3) << 3) + #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_LAST \ + HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_UNSPECIFIED + /* + * This field shall be used to provide default CoS value + * that has been configured on this port. + * This field is valid only if default CoS mapping + * is enabled. + * If default CoS mapping is not enabled, then this + * field shall be ignored. + */ + #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_DEFAULT_COS_MASK \ + UINT32_C(0xe0) + #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_DEFAULT_COS_SFT \ + 5 + uint8_t unused_0[3]; + /* + * This signed field specifies by how much to adjust the frequency + * of sync timer updates (measured in parts per billion). + */ + int32_t ptp_freq_adj_ppb; + uint8_t unused_1[4]; +} __rte_packed; + +/* hwrm_port_mac_cfg_output (size:128b/16B) */ +struct hwrm_port_mac_cfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* + * This is the configured maximum length of Ethernet packet + * payload that is allowed to be received on the port. + * This value does not include the number of bytes used by + * Ethernet header and trailer (CRC). + */ + uint16_t mru; + /* + * This is the configured maximum length of Ethernet packet + * payload that is allowed to be transmitted on the port. + * This value does not include the number of bytes used by + * Ethernet header and trailer (CRC). + */ + uint16_t mtu; + /* Current configuration of the IPG value. */ + uint8_t ipg; + /* Current value of the loopback value. */ + uint8_t lpbk; + /* No loopback is selected. Normal operation. */ + #define HWRM_PORT_MAC_CFG_OUTPUT_LPBK_NONE UINT32_C(0x0) + /* + * The HW will be configured with local loopback such that + * host data is sent back to the host without modification. + */ + #define HWRM_PORT_MAC_CFG_OUTPUT_LPBK_LOCAL UINT32_C(0x1) + /* + * The HW will be configured with remote loopback such that + * port logic will send packets back out the transmitter that + * are received. + */ + #define HWRM_PORT_MAC_CFG_OUTPUT_LPBK_REMOTE UINT32_C(0x2) + #define HWRM_PORT_MAC_CFG_OUTPUT_LPBK_LAST \ + HWRM_PORT_MAC_CFG_OUTPUT_LPBK_REMOTE + uint8_t unused_0; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/********************** + * hwrm_port_mac_qcfg * + **********************/ + + +/* hwrm_port_mac_qcfg_input (size:192b/24B) */ +struct hwrm_port_mac_qcfg_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* Port ID of port that is to be configured. */ + uint16_t port_id; + uint8_t unused_0[6]; +} __rte_packed; + +/* hwrm_port_mac_qcfg_output (size:256b/32B) */ +struct hwrm_port_mac_qcfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* + * This is the configured maximum length of Ethernet packet + * payload that is allowed to be received on the port. + * This value does not include the number of bytes used by the + * Ethernet header and trailer (CRC). + */ + uint16_t mru; + /* + * This is the configured maximum length of Ethernet packet + * payload that is allowed to be transmitted on the port. + * This value does not include the number of bytes used by the + * Ethernet header and trailer (CRC). + */ + uint16_t mtu; + /* + * The minimum IPG that will + * be sent between packets by this port. + */ + uint8_t ipg; + /* The loopback setting for the MAC. */ + uint8_t lpbk; + /* No loopback is selected. Normal operation. */ + #define HWRM_PORT_MAC_QCFG_OUTPUT_LPBK_NONE UINT32_C(0x0) + /* + * The HW will be configured with local loopback such that + * host data is sent back to the host without modification. + */ + #define HWRM_PORT_MAC_QCFG_OUTPUT_LPBK_LOCAL UINT32_C(0x1) + /* + * The HW will be configured with remote loopback such that + * port logic will send packets back out the transmitter that + * are received. + */ + #define HWRM_PORT_MAC_QCFG_OUTPUT_LPBK_REMOTE UINT32_C(0x2) + #define HWRM_PORT_MAC_QCFG_OUTPUT_LPBK_LAST \ + HWRM_PORT_MAC_QCFG_OUTPUT_LPBK_REMOTE + /* + * Priority setting for VLAN PRI to CoS mapping. + * # Each XXX_pri variable shall have a unique priority value + * when it is being used. + * # When comparing priorities of mappings, higher value + * indicates higher priority. + * For example, a value of 0-3 is returned where 0 is being + * the lowest priority and 3 is being the highest priority. + * # If the correspoding CoS mapping is not enabled, then this + * field should be ignored. + * # This value indicates the normalized priority value retained + * in the HWRM. + */ + uint8_t vlan_pri2cos_map_pri; + /* + * In this field, a number of CoS mappings related flags + * are used to indicate configured CoS mappings. + */ + uint8_t flags; + /* + * When this bit is set to '1', the inner VLAN PRI to CoS mapping + * is enabled. + */ + #define HWRM_PORT_MAC_QCFG_OUTPUT_FLAGS_VLAN_PRI2COS_ENABLE \ UINT32_C(0x1) - /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_LVL_2 \ + /* + * When this bit is set to '1', tunnel VLAN PRI field to + * CoS mapping is enabled. + */ + #define HWRM_PORT_MAC_QCFG_OUTPUT_FLAGS_TUNNEL_PRI2COS_ENABLE \ UINT32_C(0x2) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_LAST \ - HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_LVL_2 - /* TQM ring 7 page size. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_MASK \ - UINT32_C(0xf0) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_SFT 4 - /* 4KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_4K \ - (UINT32_C(0x0) << 4) - /* 8KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_8K \ - (UINT32_C(0x1) << 4) - /* 64KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_64K \ - (UINT32_C(0x2) << 4) - /* 2MB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_2M \ - (UINT32_C(0x3) << 4) - /* 8MB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_8M \ - (UINT32_C(0x4) << 4) - /* 1GB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_1G \ - (UINT32_C(0x5) << 4) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_LAST \ - HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_1G - /* MR/AV page size and level. */ - uint8_t mrav_pg_size_mrav_lvl; - /* MR/AV PBL indirect levels. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_MASK \ - UINT32_C(0xf) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_SFT 0 - /* PBL pointer is physical start address. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_LVL_0 \ - UINT32_C(0x0) - /* PBL pointer points to PTE table. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_LVL_1 \ + /* + * When this bit is set to '1', the IP DSCP to CoS mapping is + * enabled. + */ + #define HWRM_PORT_MAC_QCFG_OUTPUT_FLAGS_IP_DSCP2COS_ENABLE \ + UINT32_C(0x4) + /* + * When this bit is '1', the Out-Of-Box WoL is enabled on this + * port. + */ + #define HWRM_PORT_MAC_QCFG_OUTPUT_FLAGS_OOB_WOL_ENABLE \ + UINT32_C(0x8) + /* When this bit is '1', PTP is enabled for RX on this port. */ + #define HWRM_PORT_MAC_QCFG_OUTPUT_FLAGS_PTP_RX_TS_CAPTURE_ENABLE \ + UINT32_C(0x10) + /* When this bit is '1', PTP is enabled for TX on this port. */ + #define HWRM_PORT_MAC_QCFG_OUTPUT_FLAGS_PTP_TX_TS_CAPTURE_ENABLE \ + UINT32_C(0x20) + /* + * Priority setting for tunnel VLAN PRI to CoS mapping. + * # Each XXX_pri variable shall have a unique priority value + * when it is being used. + * # When comparing priorities of mappings, higher value + * indicates higher priority. + * For example, a value of 0-3 is returned where 0 is being + * the lowest priority and 3 is being the highest priority. + * # If the correspoding CoS mapping is not enabled, then this + * field should be ignored. + * # This value indicates the normalized priority value retained + * in the HWRM. + */ + uint8_t tunnel_pri2cos_map_pri; + /* + * Priority setting for DSCP to PRI mapping. + * # Each XXX_pri variable shall have a unique priority value + * when it is being used. + * # When comparing priorities of mappings, higher value + * indicates higher priority. + * For example, a value of 0-3 is returned where 0 is being + * the lowest priority and 3 is being the highest priority. + * # If the correspoding CoS mapping is not enabled, then this + * field should be ignored. + * # This value indicates the normalized priority value retained + * in the HWRM. + */ + uint8_t dscp2pri_map_pri; + /* + * This is a 16-bit bit mask that represents the + * current configuration of time stamp capture of PTP messages + * on the receive side of this port. + * If bit 'i' is set, then the receive side of the port + * is configured to capture the time stamp of every + * received PTP message with messageType field value set + * to i. + * If all bits are set to 0 (i.e. field value set 0), + * then the receive side of the port is not configured + * to capture timestamp for PTP messages. + * If all bits are set to 1, then the receive side of the + * port is configured to capture timestamp for all PTP + * messages. + */ + uint16_t rx_ts_capture_ptp_msg_type; + /* + * This is a 16-bit bit mask that represents the + * current configuration of time stamp capture of PTP messages + * on the transmit side of this port. + * If bit 'i' is set, then the transmit side of the port + * is configured to capture the time stamp of every + * received PTP message with messageType field value set + * to i. + * If all bits are set to 0 (i.e. field value set 0), + * then the transmit side of the port is not configured + * to capture timestamp for PTP messages. + * If all bits are set to 1, then the transmit side of the + * port is configured to capture timestamp for all PTP + * messages. + */ + uint16_t tx_ts_capture_ptp_msg_type; + /* Configuration of CoS fields. */ + uint8_t cos_field_cfg; + /* Reserved */ + #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_RSVD \ UINT32_C(0x1) - /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_LVL_2 \ - UINT32_C(0x2) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_LAST \ - HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_LVL_2 - /* MR/AV page size. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_MASK \ - UINT32_C(0xf0) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_SFT 4 - /* 4KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_4K \ - (UINT32_C(0x0) << 4) - /* 8KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_8K \ - (UINT32_C(0x1) << 4) - /* 64KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_64K \ - (UINT32_C(0x2) << 4) - /* 2MB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_2M \ - (UINT32_C(0x3) << 4) - /* 8MB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_8M \ - (UINT32_C(0x4) << 4) - /* 1GB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_1G \ - (UINT32_C(0x5) << 4) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_LAST \ - HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_1G - /* Timer page size and level. */ - uint8_t tim_pg_size_tim_lvl; - /* Timer PBL indirect levels. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_MASK \ - UINT32_C(0xf) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_SFT 0 - /* PBL pointer is physical start address. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_LVL_0 \ - UINT32_C(0x0) - /* PBL pointer points to PTE table. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_LVL_1 \ + /* + * This field is used for selecting VLAN PRI value + * based on whether one or two VLAN Tags are present in + * the inner packet headers of tunneled packets or + * non-tunneled packets. + */ + #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_MASK \ + UINT32_C(0x6) + #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_SFT \ + 1 + /* + * Select inner VLAN PRI when 1 or 2 VLAN Tags are + * present in the inner packet headers + */ + #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_INNERMOST \ + (UINT32_C(0x0) << 1) + /* + * Select outer VLAN Tag PRI when 2 VLAN Tags are + * present in the inner packet headers. + * No VLAN PRI is selected for this configuration + * if only one VLAN Tag is present in the inner + * packet headers. + */ + #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_OUTER \ + (UINT32_C(0x1) << 1) + /* + * Select outermost VLAN PRI when 1 or 2 VLAN Tags + * are present in the inner packet headers + */ + #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_OUTERMOST \ + (UINT32_C(0x2) << 1) + /* Unspecified */ + #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_UNSPECIFIED \ + (UINT32_C(0x3) << 1) + #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_LAST \ + HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_UNSPECIFIED + /* + * This field is used for selecting tunnel VLAN PRI value + * based on whether one or two VLAN Tags are present in + * the tunnel headers of tunneled packets. This selection + * does not apply to non-tunneled packets. + */ + #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_MASK \ + UINT32_C(0x18) + #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_SFT \ + 3 + /* + * Select inner VLAN PRI when 1 or 2 VLAN Tags are + * present in the tunnel packet headers + */ + #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_INNERMOST \ + (UINT32_C(0x0) << 3) + /* + * Select outer VLAN Tag PRI when 2 VLAN Tags are + * present in the tunnel packet headers. + * No VLAN PRI is selected for this configuration + * if only one VLAN Tag is present in the tunnel + * packet headers. + */ + #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_OUTER \ + (UINT32_C(0x1) << 3) + /* + * Select outermost VLAN PRI when 1 or 2 VLAN Tags + * are present in the tunnel packet headers + */ + #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_OUTERMOST \ + (UINT32_C(0x2) << 3) + /* Unspecified */ + #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_UNSPECIFIED \ + (UINT32_C(0x3) << 3) + #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_LAST \ + HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_UNSPECIFIED + /* + * This field is used to provide default CoS value that + * has been configured on this port. + */ + #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_DEFAULT_COS_MASK \ + UINT32_C(0xe0) + #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_DEFAULT_COS_SFT \ + 5 + uint8_t unused_1; + uint16_t port_svif_info; + /* + * This field specifies the source virtual interface of the port being + * queried. Drivers can use this to program port svif field in the + * L2 context table + */ + #define HWRM_PORT_MAC_QCFG_OUTPUT_PORT_SVIF_INFO_PORT_SVIF_MASK \ + UINT32_C(0x7fff) + #define HWRM_PORT_MAC_QCFG_OUTPUT_PORT_SVIF_INFO_PORT_SVIF_SFT 0 + /* This field specifies whether port_svif is valid or not */ + #define HWRM_PORT_MAC_QCFG_OUTPUT_PORT_SVIF_INFO_PORT_SVIF_VALID \ + UINT32_C(0x8000) + uint8_t unused_2[5]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/************************** + * hwrm_port_mac_ptp_qcfg * + **************************/ + + +/* hwrm_port_mac_ptp_qcfg_input (size:192b/24B) */ +struct hwrm_port_mac_ptp_qcfg_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* Port ID of port that is being queried. */ + uint16_t port_id; + uint8_t unused_0[6]; +} __rte_packed; + +/* hwrm_port_mac_ptp_qcfg_output (size:640b/80B) */ +struct hwrm_port_mac_ptp_qcfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* + * In this field, a number of PTP related flags + * are used to indicate configured PTP capabilities. + */ + uint8_t flags; + /* + * When this bit is set to '1', the PTP related registers are + * directly accessible by the host. + */ + #define HWRM_PORT_MAC_PTP_QCFG_OUTPUT_FLAGS_DIRECT_ACCESS \ + UINT32_C(0x1) + /* + * When this bit is set to '1', the device supports one-step + * Tx timestamping. + */ + #define HWRM_PORT_MAC_PTP_QCFG_OUTPUT_FLAGS_ONE_STEP_TX_TS \ + UINT32_C(0x4) + /* + * When this bit is set to '1', the PTP information is accessible + * via HWRM commands. + */ + #define HWRM_PORT_MAC_PTP_QCFG_OUTPUT_FLAGS_HWRM_ACCESS \ + UINT32_C(0x8) + uint8_t unused_0[3]; + /* Offset of the PTP register for the lower 32 bits of timestamp for RX. */ + uint32_t rx_ts_reg_off_lower; + /* Offset of the PTP register for the upper 32 bits of timestamp for RX. */ + uint32_t rx_ts_reg_off_upper; + /* Offset of the PTP register for the sequence ID for RX. */ + uint32_t rx_ts_reg_off_seq_id; + /* Offset of the first PTP source ID for RX. */ + uint32_t rx_ts_reg_off_src_id_0; + /* Offset of the second PTP source ID for RX. */ + uint32_t rx_ts_reg_off_src_id_1; + /* Offset of the third PTP source ID for RX. */ + uint32_t rx_ts_reg_off_src_id_2; + /* Offset of the domain ID for RX. */ + uint32_t rx_ts_reg_off_domain_id; + /* Offset of the PTP FIFO register for RX. */ + uint32_t rx_ts_reg_off_fifo; + /* Offset of the PTP advance FIFO register for RX. */ + uint32_t rx_ts_reg_off_fifo_adv; + /* PTP timestamp granularity for RX. */ + uint32_t rx_ts_reg_off_granularity; + /* Offset of the PTP register for the lower 32 bits of timestamp for TX. */ + uint32_t tx_ts_reg_off_lower; + /* Offset of the PTP register for the upper 32 bits of timestamp for TX. */ + uint32_t tx_ts_reg_off_upper; + /* Offset of the PTP register for the sequence ID for TX. */ + uint32_t tx_ts_reg_off_seq_id; + /* Offset of the PTP FIFO register for TX. */ + uint32_t tx_ts_reg_off_fifo; + /* PTP timestamp granularity for TX. */ + uint32_t tx_ts_reg_off_granularity; + uint8_t unused_1[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/* Port Tx Statistics Format */ +/* tx_port_stats (size:3264b/408B) */ +struct tx_port_stats { + /* Total Number of 64 Bytes frames transmitted */ + uint64_t tx_64b_frames; + /* Total Number of 65-127 Bytes frames transmitted */ + uint64_t tx_65b_127b_frames; + /* Total Number of 128-255 Bytes frames transmitted */ + uint64_t tx_128b_255b_frames; + /* Total Number of 256-511 Bytes frames transmitted */ + uint64_t tx_256b_511b_frames; + /* Total Number of 512-1023 Bytes frames transmitted */ + uint64_t tx_512b_1023b_frames; + /* Total Number of 1024-1518 Bytes frames transmitted */ + uint64_t tx_1024b_1518b_frames; + /* + * Total Number of each good VLAN (exludes FCS errors) + * frame transmitted which is 1519 to 1522 bytes in length + * inclusive (excluding framing bits but including FCS bytes). + */ + uint64_t tx_good_vlan_frames; + /* Total Number of 1519-2047 Bytes frames transmitted */ + uint64_t tx_1519b_2047b_frames; + /* Total Number of 2048-4095 Bytes frames transmitted */ + uint64_t tx_2048b_4095b_frames; + /* Total Number of 4096-9216 Bytes frames transmitted */ + uint64_t tx_4096b_9216b_frames; + /* Total Number of 9217-16383 Bytes frames transmitted */ + uint64_t tx_9217b_16383b_frames; + /* Total Number of good frames transmitted */ + uint64_t tx_good_frames; + /* Total Number of frames transmitted */ + uint64_t tx_total_frames; + /* Total number of unicast frames transmitted */ + uint64_t tx_ucast_frames; + /* Total number of multicast frames transmitted */ + uint64_t tx_mcast_frames; + /* Total number of broadcast frames transmitted */ + uint64_t tx_bcast_frames; + /* Total number of PAUSE control frames transmitted */ + uint64_t tx_pause_frames; + /* + * Total number of PFC/per-priority PAUSE + * control frames transmitted + */ + uint64_t tx_pfc_frames; + /* Total number of jabber frames transmitted */ + uint64_t tx_jabber_frames; + /* Total number of frames transmitted with FCS error */ + uint64_t tx_fcs_err_frames; + /* Total number of control frames transmitted */ + uint64_t tx_control_frames; + /* Total number of over-sized frames transmitted */ + uint64_t tx_oversz_frames; + /* Total number of frames with single deferral */ + uint64_t tx_single_dfrl_frames; + /* Total number of frames with multiple deferrals */ + uint64_t tx_multi_dfrl_frames; + /* Total number of frames with single collision */ + uint64_t tx_single_coll_frames; + /* Total number of frames with multiple collisions */ + uint64_t tx_multi_coll_frames; + /* Total number of frames with late collisions */ + uint64_t tx_late_coll_frames; + /* Total number of frames with excessive collisions */ + uint64_t tx_excessive_coll_frames; + /* Total number of fragmented frames transmitted */ + uint64_t tx_frag_frames; + /* Total number of transmit errors */ + uint64_t tx_err; + /* Total number of single VLAN tagged frames transmitted */ + uint64_t tx_tagged_frames; + /* Total number of double VLAN tagged frames transmitted */ + uint64_t tx_dbl_tagged_frames; + /* Total number of runt frames transmitted */ + uint64_t tx_runt_frames; + /* Total number of TX FIFO under runs */ + uint64_t tx_fifo_underruns; + /* + * Total number of PFC frames with PFC enabled bit for + * Pri 0 transmitted + */ + uint64_t tx_pfc_ena_frames_pri0; + /* + * Total number of PFC frames with PFC enabled bit for + * Pri 1 transmitted + */ + uint64_t tx_pfc_ena_frames_pri1; + /* + * Total number of PFC frames with PFC enabled bit for + * Pri 2 transmitted + */ + uint64_t tx_pfc_ena_frames_pri2; + /* + * Total number of PFC frames with PFC enabled bit for + * Pri 3 transmitted + */ + uint64_t tx_pfc_ena_frames_pri3; + /* + * Total number of PFC frames with PFC enabled bit for + * Pri 4 transmitted + */ + uint64_t tx_pfc_ena_frames_pri4; + /* + * Total number of PFC frames with PFC enabled bit for + * Pri 5 transmitted + */ + uint64_t tx_pfc_ena_frames_pri5; + /* + * Total number of PFC frames with PFC enabled bit for + * Pri 6 transmitted + */ + uint64_t tx_pfc_ena_frames_pri6; + /* + * Total number of PFC frames with PFC enabled bit for + * Pri 7 transmitted + */ + uint64_t tx_pfc_ena_frames_pri7; + /* Total number of EEE LPI Events on TX */ + uint64_t tx_eee_lpi_events; + /* EEE LPI Duration Counter on TX */ + uint64_t tx_eee_lpi_duration; + /* + * Total number of Link Level Flow Control (LLFC) messages + * transmitted + */ + uint64_t tx_llfc_logical_msgs; + /* Total number of HCFC messages transmitted */ + uint64_t tx_hcfc_msgs; + /* Total number of TX collisions */ + uint64_t tx_total_collisions; + /* Total number of transmitted bytes */ + uint64_t tx_bytes; + /* Total number of end-to-end HOL frames */ + uint64_t tx_xthol_frames; + /* Total Tx Drops per Port reported by STATS block */ + uint64_t tx_stat_discard; + /* Total Tx Error Drops per Port reported by STATS block */ + uint64_t tx_stat_error; +} __rte_packed; + +/* Port Rx Statistics Format */ +/* rx_port_stats (size:4224b/528B) */ +struct rx_port_stats { + /* Total Number of 64 Bytes frames received */ + uint64_t rx_64b_frames; + /* Total Number of 65-127 Bytes frames received */ + uint64_t rx_65b_127b_frames; + /* Total Number of 128-255 Bytes frames received */ + uint64_t rx_128b_255b_frames; + /* Total Number of 256-511 Bytes frames received */ + uint64_t rx_256b_511b_frames; + /* Total Number of 512-1023 Bytes frames received */ + uint64_t rx_512b_1023b_frames; + /* Total Number of 1024-1518 Bytes frames received */ + uint64_t rx_1024b_1518b_frames; + /* + * Total Number of each good VLAN (exludes FCS errors) + * frame received which is 1519 to 1522 bytes in length + * inclusive (excluding framing bits but including FCS bytes). + */ + uint64_t rx_good_vlan_frames; + /* Total Number of 1519-2047 Bytes frames received */ + uint64_t rx_1519b_2047b_frames; + /* Total Number of 2048-4095 Bytes frames received */ + uint64_t rx_2048b_4095b_frames; + /* Total Number of 4096-9216 Bytes frames received */ + uint64_t rx_4096b_9216b_frames; + /* Total Number of 9217-16383 Bytes frames received */ + uint64_t rx_9217b_16383b_frames; + /* Total number of frames received */ + uint64_t rx_total_frames; + /* Total number of unicast frames received */ + uint64_t rx_ucast_frames; + /* Total number of multicast frames received */ + uint64_t rx_mcast_frames; + /* Total number of broadcast frames received */ + uint64_t rx_bcast_frames; + /* Total number of received frames with FCS error */ + uint64_t rx_fcs_err_frames; + /* Total number of control frames received */ + uint64_t rx_ctrl_frames; + /* Total number of PAUSE frames received */ + uint64_t rx_pause_frames; + /* Total number of PFC frames received */ + uint64_t rx_pfc_frames; + /* + * Total number of frames received with an unsupported + * opcode + */ + uint64_t rx_unsupported_opcode_frames; + /* + * Total number of frames received with an unsupported + * DA for pause and PFC + */ + uint64_t rx_unsupported_da_pausepfc_frames; + /* Total number of frames received with an unsupported SA */ + uint64_t rx_wrong_sa_frames; + /* Total number of received packets with alignment error */ + uint64_t rx_align_err_frames; + /* Total number of received frames with out-of-range length */ + uint64_t rx_oor_len_frames; + /* Total number of received frames with error termination */ + uint64_t rx_code_err_frames; + /* + * Total number of received frames with a false carrier is + * detected during idle, as defined by RX_ER samples active + * and RXD is 0xE. The event is reported along with the + * statistics generated on the next received frame. Only + * one false carrier condition can be detected and logged + * between frames. + * + * Carrier event, valid for 10M/100M speed modes only. + */ + uint64_t rx_false_carrier_frames; + /* Total number of over-sized frames received */ + uint64_t rx_ovrsz_frames; + /* Total number of jabber packets received */ + uint64_t rx_jbr_frames; + /* Total number of received frames with MTU error */ + uint64_t rx_mtu_err_frames; + /* Total number of received frames with CRC match */ + uint64_t rx_match_crc_frames; + /* Total number of frames received promiscuously */ + uint64_t rx_promiscuous_frames; + /* + * Total number of received frames with one or two VLAN + * tags + */ + uint64_t rx_tagged_frames; + /* Total number of received frames with two VLAN tags */ + uint64_t rx_double_tagged_frames; + /* Total number of truncated frames received */ + uint64_t rx_trunc_frames; + /* Total number of good frames (without errors) received */ + uint64_t rx_good_frames; + /* + * Total number of received PFC frames with transition from + * XON to XOFF on Pri 0 + */ + uint64_t rx_pfc_xon2xoff_frames_pri0; + /* + * Total number of received PFC frames with transition from + * XON to XOFF on Pri 1 + */ + uint64_t rx_pfc_xon2xoff_frames_pri1; + /* + * Total number of received PFC frames with transition from + * XON to XOFF on Pri 2 + */ + uint64_t rx_pfc_xon2xoff_frames_pri2; + /* + * Total number of received PFC frames with transition from + * XON to XOFF on Pri 3 + */ + uint64_t rx_pfc_xon2xoff_frames_pri3; + /* + * Total number of received PFC frames with transition from + * XON to XOFF on Pri 4 + */ + uint64_t rx_pfc_xon2xoff_frames_pri4; + /* + * Total number of received PFC frames with transition from + * XON to XOFF on Pri 5 + */ + uint64_t rx_pfc_xon2xoff_frames_pri5; + /* + * Total number of received PFC frames with transition from + * XON to XOFF on Pri 6 + */ + uint64_t rx_pfc_xon2xoff_frames_pri6; + /* + * Total number of received PFC frames with transition from + * XON to XOFF on Pri 7 + */ + uint64_t rx_pfc_xon2xoff_frames_pri7; + /* + * Total number of received PFC frames with PFC enabled + * bit for Pri 0 + */ + uint64_t rx_pfc_ena_frames_pri0; + /* + * Total number of received PFC frames with PFC enabled + * bit for Pri 1 + */ + uint64_t rx_pfc_ena_frames_pri1; + /* + * Total number of received PFC frames with PFC enabled + * bit for Pri 2 + */ + uint64_t rx_pfc_ena_frames_pri2; + /* + * Total number of received PFC frames with PFC enabled + * bit for Pri 3 + */ + uint64_t rx_pfc_ena_frames_pri3; + /* + * Total number of received PFC frames with PFC enabled + * bit for Pri 4 + */ + uint64_t rx_pfc_ena_frames_pri4; + /* + * Total number of received PFC frames with PFC enabled + * bit for Pri 5 + */ + uint64_t rx_pfc_ena_frames_pri5; + /* + * Total number of received PFC frames with PFC enabled + * bit for Pri 6 + */ + uint64_t rx_pfc_ena_frames_pri6; + /* + * Total number of received PFC frames with PFC enabled + * bit for Pri 7 + */ + uint64_t rx_pfc_ena_frames_pri7; + /* Total Number of frames received with SCH CRC error */ + uint64_t rx_sch_crc_err_frames; + /* Total Number of under-sized frames received */ + uint64_t rx_undrsz_frames; + /* Total Number of fragmented frames received */ + uint64_t rx_frag_frames; + /* Total number of RX EEE LPI Events */ + uint64_t rx_eee_lpi_events; + /* EEE LPI Duration Counter on RX */ + uint64_t rx_eee_lpi_duration; + /* + * Total number of physical type Link Level Flow Control + * (LLFC) messages received + */ + uint64_t rx_llfc_physical_msgs; + /* + * Total number of logical type Link Level Flow Control + * (LLFC) messages received + */ + uint64_t rx_llfc_logical_msgs; + /* + * Total number of logical type Link Level Flow Control + * (LLFC) messages received with CRC error + */ + uint64_t rx_llfc_msgs_with_crc_err; + /* Total number of HCFC messages received */ + uint64_t rx_hcfc_msgs; + /* Total number of HCFC messages received with CRC error */ + uint64_t rx_hcfc_msgs_with_crc_err; + /* Total number of received bytes */ + uint64_t rx_bytes; + /* Total number of bytes received in runt frames */ + uint64_t rx_runt_bytes; + /* Total number of runt frames received */ + uint64_t rx_runt_frames; + /* Total Rx Discards per Port reported by STATS block */ + uint64_t rx_stat_discard; + uint64_t rx_stat_err; +} __rte_packed; + +/******************** + * hwrm_port_qstats * + ********************/ + + +/* hwrm_port_qstats_input (size:320b/40B) */ +struct hwrm_port_qstats_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* Port ID of port that is being queried. */ + uint16_t port_id; + uint8_t flags; + /* This value is not used to avoid backward compatibility issues. */ + #define HWRM_PORT_QSTATS_INPUT_FLAGS_UNUSED UINT32_C(0x0) + /* + * This bit is set to 1 when request is for a counter mask, + * representing the width of each of the stats counters, rather + * than counters themselves. + */ + #define HWRM_PORT_QSTATS_INPUT_FLAGS_COUNTER_MASK UINT32_C(0x1) + #define HWRM_PORT_QSTATS_INPUT_FLAGS_LAST \ + HWRM_PORT_QSTATS_INPUT_FLAGS_COUNTER_MASK + uint8_t unused_0[5]; + /* + * This is the host address where + * Tx port statistics will be stored + */ + uint64_t tx_stat_host_addr; + /* + * This is the host address where + * Rx port statistics will be stored + */ + uint64_t rx_stat_host_addr; +} __rte_packed; + +/* hwrm_port_qstats_output (size:128b/16B) */ +struct hwrm_port_qstats_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* The size of TX port statistics block in bytes. */ + uint16_t tx_stat_size; + /* The size of RX port statistics block in bytes. */ + uint16_t rx_stat_size; + uint8_t unused_0[3]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/* Port Tx Statistics extended Format */ +/* tx_port_stats_ext (size:2048b/256B) */ +struct tx_port_stats_ext { + /* Total number of tx bytes count on cos queue 0 */ + uint64_t tx_bytes_cos0; + /* Total number of tx bytes count on cos queue 1 */ + uint64_t tx_bytes_cos1; + /* Total number of tx bytes count on cos queue 2 */ + uint64_t tx_bytes_cos2; + /* Total number of tx bytes count on cos queue 3 */ + uint64_t tx_bytes_cos3; + /* Total number of tx bytes count on cos queue 4 */ + uint64_t tx_bytes_cos4; + /* Total number of tx bytes count on cos queue 5 */ + uint64_t tx_bytes_cos5; + /* Total number of tx bytes count on cos queue 6 */ + uint64_t tx_bytes_cos6; + /* Total number of tx bytes count on cos queue 7 */ + uint64_t tx_bytes_cos7; + /* Total number of tx packets count on cos queue 0 */ + uint64_t tx_packets_cos0; + /* Total number of tx packets count on cos queue 1 */ + uint64_t tx_packets_cos1; + /* Total number of tx packets count on cos queue 2 */ + uint64_t tx_packets_cos2; + /* Total number of tx packets count on cos queue 3 */ + uint64_t tx_packets_cos3; + /* Total number of tx packets count on cos queue 4 */ + uint64_t tx_packets_cos4; + /* Total number of tx packets count on cos queue 5 */ + uint64_t tx_packets_cos5; + /* Total number of tx packets count on cos queue 6 */ + uint64_t tx_packets_cos6; + /* Total number of tx packets count on cos queue 7 */ + uint64_t tx_packets_cos7; + /* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 0 */ + uint64_t pfc_pri0_tx_duration_us; + /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 0 */ + uint64_t pfc_pri0_tx_transitions; + /* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 1 */ + uint64_t pfc_pri1_tx_duration_us; + /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 1 */ + uint64_t pfc_pri1_tx_transitions; + /* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 2 */ + uint64_t pfc_pri2_tx_duration_us; + /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 2 */ + uint64_t pfc_pri2_tx_transitions; + /* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 3 */ + uint64_t pfc_pri3_tx_duration_us; + /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 3 */ + uint64_t pfc_pri3_tx_transitions; + /* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 4 */ + uint64_t pfc_pri4_tx_duration_us; + /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 4 */ + uint64_t pfc_pri4_tx_transitions; + /* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 5 */ + uint64_t pfc_pri5_tx_duration_us; + /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 5 */ + uint64_t pfc_pri5_tx_transitions; + /* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 6 */ + uint64_t pfc_pri6_tx_duration_us; + /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 6 */ + uint64_t pfc_pri6_tx_transitions; + /* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 7 */ + uint64_t pfc_pri7_tx_duration_us; + /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 7 */ + uint64_t pfc_pri7_tx_transitions; +} __rte_packed; + +/* Port Rx Statistics extended Format */ +/* rx_port_stats_ext (size:3648b/456B) */ +struct rx_port_stats_ext { + /* Number of times link state changed to down */ + uint64_t link_down_events; + /* Number of times the idle rings with pause bit are found */ + uint64_t continuous_pause_events; + /* Number of times the active rings pause bit resumed back */ + uint64_t resume_pause_events; + /* Number of times, the ROCE cos queue PFC is disabled to avoid pause flood/burst */ + uint64_t continuous_roce_pause_events; + /* Number of times, the ROCE cos queue PFC is enabled back */ + uint64_t resume_roce_pause_events; + /* Total number of rx bytes count on cos queue 0 */ + uint64_t rx_bytes_cos0; + /* Total number of rx bytes count on cos queue 1 */ + uint64_t rx_bytes_cos1; + /* Total number of rx bytes count on cos queue 2 */ + uint64_t rx_bytes_cos2; + /* Total number of rx bytes count on cos queue 3 */ + uint64_t rx_bytes_cos3; + /* Total number of rx bytes count on cos queue 4 */ + uint64_t rx_bytes_cos4; + /* Total number of rx bytes count on cos queue 5 */ + uint64_t rx_bytes_cos5; + /* Total number of rx bytes count on cos queue 6 */ + uint64_t rx_bytes_cos6; + /* Total number of rx bytes count on cos queue 7 */ + uint64_t rx_bytes_cos7; + /* Total number of rx packets count on cos queue 0 */ + uint64_t rx_packets_cos0; + /* Total number of rx packets count on cos queue 1 */ + uint64_t rx_packets_cos1; + /* Total number of rx packets count on cos queue 2 */ + uint64_t rx_packets_cos2; + /* Total number of rx packets count on cos queue 3 */ + uint64_t rx_packets_cos3; + /* Total number of rx packets count on cos queue 4 */ + uint64_t rx_packets_cos4; + /* Total number of rx packets count on cos queue 5 */ + uint64_t rx_packets_cos5; + /* Total number of rx packets count on cos queue 6 */ + uint64_t rx_packets_cos6; + /* Total number of rx packets count on cos queue 7 */ + uint64_t rx_packets_cos7; + /* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 0 */ + uint64_t pfc_pri0_rx_duration_us; + /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 0 */ + uint64_t pfc_pri0_rx_transitions; + /* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 1 */ + uint64_t pfc_pri1_rx_duration_us; + /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 1 */ + uint64_t pfc_pri1_rx_transitions; + /* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 2 */ + uint64_t pfc_pri2_rx_duration_us; + /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 2 */ + uint64_t pfc_pri2_rx_transitions; + /* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 3 */ + uint64_t pfc_pri3_rx_duration_us; + /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 3 */ + uint64_t pfc_pri3_rx_transitions; + /* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 4 */ + uint64_t pfc_pri4_rx_duration_us; + /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 4 */ + uint64_t pfc_pri4_rx_transitions; + /* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 5 */ + uint64_t pfc_pri5_rx_duration_us; + /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 5 */ + uint64_t pfc_pri5_rx_transitions; + /* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 6 */ + uint64_t pfc_pri6_rx_duration_us; + /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 6 */ + uint64_t pfc_pri6_rx_transitions; + /* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 7 */ + uint64_t pfc_pri7_rx_duration_us; + /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 7 */ + uint64_t pfc_pri7_rx_transitions; + /* Total number of received bits */ + uint64_t rx_bits; + /* The number of events where the port receive buffer was over 85% full */ + uint64_t rx_buffer_passed_threshold; + /* + * The number of symbol errors that wasn't corrected by FEC correction + * alogirithm + */ + uint64_t rx_pcs_symbol_err; + /* The number of corrected bits on the port according to active FEC */ + uint64_t rx_corrected_bits; + /* Total number of rx discard bytes count on cos queue 0 */ + uint64_t rx_discard_bytes_cos0; + /* Total number of rx discard bytes count on cos queue 1 */ + uint64_t rx_discard_bytes_cos1; + /* Total number of rx discard bytes count on cos queue 2 */ + uint64_t rx_discard_bytes_cos2; + /* Total number of rx discard bytes count on cos queue 3 */ + uint64_t rx_discard_bytes_cos3; + /* Total number of rx discard bytes count on cos queue 4 */ + uint64_t rx_discard_bytes_cos4; + /* Total number of rx discard bytes count on cos queue 5 */ + uint64_t rx_discard_bytes_cos5; + /* Total number of rx discard bytes count on cos queue 6 */ + uint64_t rx_discard_bytes_cos6; + /* Total number of rx discard bytes count on cos queue 7 */ + uint64_t rx_discard_bytes_cos7; + /* Total number of rx discard packets count on cos queue 0 */ + uint64_t rx_discard_packets_cos0; + /* Total number of rx discard packets count on cos queue 1 */ + uint64_t rx_discard_packets_cos1; + /* Total number of rx discard packets count on cos queue 2 */ + uint64_t rx_discard_packets_cos2; + /* Total number of rx discard packets count on cos queue 3 */ + uint64_t rx_discard_packets_cos3; + /* Total number of rx discard packets count on cos queue 4 */ + uint64_t rx_discard_packets_cos4; + /* Total number of rx discard packets count on cos queue 5 */ + uint64_t rx_discard_packets_cos5; + /* Total number of rx discard packets count on cos queue 6 */ + uint64_t rx_discard_packets_cos6; + /* Total number of rx discard packets count on cos queue 7 */ + uint64_t rx_discard_packets_cos7; +} __rte_packed; + +/* + * Port Rx Statistics extended PFC WatchDog Format. + * StormDetect and StormRevert event determination is based + * on an integration period and a percentage threshold. + * StormDetect event - when percentage of XOFF frames received + * within an integration period exceeds the configured threshold. + * StormRevert event - when percentage of XON frames received + * within an integration period exceeds the configured threshold. + * Actual number of XOFF/XON frames for the events to be triggered + * depends on both configured integration period and sampling rate. + * The statistics in this structure represent counts of specified + * events from the moment the feature (PFC WatchDog) is enabled via + * hwrm_queue_pfc_enable_cfg call. + */ +/* rx_port_stats_ext_pfc_wd (size:5120b/640B) */ +struct rx_port_stats_ext_pfc_wd { + /* + * Total number of PFC WatchDog StormDetect events detected + * for Pri 0 + */ + uint64_t rx_pfc_watchdog_storms_detected_pri0; + /* + * Total number of PFC WatchDog StormDetect events detected + * for Pri 1 + */ + uint64_t rx_pfc_watchdog_storms_detected_pri1; + /* + * Total number of PFC WatchDog StormDetect events detected + * for Pri 2 + */ + uint64_t rx_pfc_watchdog_storms_detected_pri2; + /* + * Total number of PFC WatchDog StormDetect events detected + * for Pri 3 + */ + uint64_t rx_pfc_watchdog_storms_detected_pri3; + /* + * Total number of PFC WatchDog StormDetect events detected + * for Pri 4 + */ + uint64_t rx_pfc_watchdog_storms_detected_pri4; + /* + * Total number of PFC WatchDog StormDetect events detected + * for Pri 5 + */ + uint64_t rx_pfc_watchdog_storms_detected_pri5; + /* + * Total number of PFC WatchDog StormDetect events detected + * for Pri 6 + */ + uint64_t rx_pfc_watchdog_storms_detected_pri6; + /* + * Total number of PFC WatchDog StormDetect events detected + * for Pri 7 + */ + uint64_t rx_pfc_watchdog_storms_detected_pri7; + /* + * Total number of PFC WatchDog StormRevert events detected + * for Pri 0 + */ + uint64_t rx_pfc_watchdog_storms_reverted_pri0; + /* + * Total number of PFC WatchDog StormRevert events detected + * for Pri 1 + */ + uint64_t rx_pfc_watchdog_storms_reverted_pri1; + /* + * Total number of PFC WatchDog StormRevert events detected + * for Pri 2 + */ + uint64_t rx_pfc_watchdog_storms_reverted_pri2; + /* + * Total number of PFC WatchDog StormRevert events detected + * for Pri 3 + */ + uint64_t rx_pfc_watchdog_storms_reverted_pri3; + /* + * Total number of PFC WatchDog StormRevert events detected + * for Pri 4 + */ + uint64_t rx_pfc_watchdog_storms_reverted_pri4; + /* + * Total number of PFC WatchDog StormRevert events detected + * for Pri 5 + */ + uint64_t rx_pfc_watchdog_storms_reverted_pri5; + /* + * Total number of PFC WatchDog StormRevert events detected + * for Pri 6 + */ + uint64_t rx_pfc_watchdog_storms_reverted_pri6; + /* + * Total number of PFC WatchDog StormRevert events detected + * for Pri 7 + */ + uint64_t rx_pfc_watchdog_storms_reverted_pri7; + /* + * Total number of packets received during PFC watchdog storm + * for pri 0 + */ + uint64_t rx_pfc_watchdog_storms_rx_packets_pri0; + /* + * Total number of packets received during PFC watchdog storm + * for pri 1 + */ + uint64_t rx_pfc_watchdog_storms_rx_packets_pri1; + /* + * Total number of packets received during PFC watchdog storm + * for pri 2 + */ + uint64_t rx_pfc_watchdog_storms_rx_packets_pri2; + /* + * Total number of packets received during PFC watchdog storm + * for pri 3 + */ + uint64_t rx_pfc_watchdog_storms_rx_packets_pri3; + /* + * Total number of packets received during PFC watchdog storm + * for pri 4 + */ + uint64_t rx_pfc_watchdog_storms_rx_packets_pri4; + /* + * Total number of packets received during PFC watchdog storm + * for pri 5 + */ + uint64_t rx_pfc_watchdog_storms_rx_packets_pri5; + /* + * Total number of packets received during PFC watchdog storm + * for pri 6 + */ + uint64_t rx_pfc_watchdog_storms_rx_packets_pri6; + /* + * Total number of packets received during PFC watchdog storm + * for pri 7 + */ + uint64_t rx_pfc_watchdog_storms_rx_packets_pri7; + /* + * Total number of bytes received during PFC watchdog storm + * for pri 0 + */ + uint64_t rx_pfc_watchdog_storms_rx_bytes_pri0; + /* + * Total number of bytes received during PFC watchdog storm + * for pri 1 + */ + uint64_t rx_pfc_watchdog_storms_rx_bytes_pri1; + /* + * Total number of bytes received during PFC watchdog storm + * for pri 2 + */ + uint64_t rx_pfc_watchdog_storms_rx_bytes_pri2; + /* + * Total number of bytes received during PFC watchdog storm + * for pri 3 + */ + uint64_t rx_pfc_watchdog_storms_rx_bytes_pri3; + /* + * Total number of bytes received during PFC watchdog storm + * for pri 4 + */ + uint64_t rx_pfc_watchdog_storms_rx_bytes_pri4; + /* + * Total number of bytes received during PFC watchdog storm + * for pri 5 + */ + uint64_t rx_pfc_watchdog_storms_rx_bytes_pri5; + /* + * Total number of bytes received during PFC watchdog storm + * for pri 6 + */ + uint64_t rx_pfc_watchdog_storms_rx_bytes_pri6; + /* + * Total number of bytes received during PFC watchdog storm + * for pri 7 + */ + uint64_t rx_pfc_watchdog_storms_rx_bytes_pri7; + /* + * Total number of packets dropped on rx during PFC watchdog storm + * for pri 0 + */ + uint64_t rx_pfc_watchdog_storms_rx_packets_dropped_pri0; + /* + * Total number of packets dropped on rx during PFC watchdog storm + * for pri 1 + */ + uint64_t rx_pfc_watchdog_storms_rx_packets_dropped_pri1; + /* + * Total number of packets dropped on rx during PFC watchdog storm + * for pri 2 + */ + uint64_t rx_pfc_watchdog_storms_rx_packets_dropped_pri2; + /* + * Total number of packets dropped on rx during PFC watchdog storm + * for pri 3 + */ + uint64_t rx_pfc_watchdog_storms_rx_packets_dropped_pri3; + /* + * Total number of packets dropped on rx during PFC watchdog storm + * for pri 4 + */ + uint64_t rx_pfc_watchdog_storms_rx_packets_dropped_pri4; + /* + * Total number of packets dropped on rx during PFC watchdog storm + * for pri 5 + */ + uint64_t rx_pfc_watchdog_storms_rx_packets_dropped_pri5; + /* + * Total number of packets dropped on rx during PFC watchdog storm + * for pri 6 + */ + uint64_t rx_pfc_watchdog_storms_rx_packets_dropped_pri6; + /* + * Total number of packets dropped on rx during PFC watchdog storm + * for pri 7 + */ + uint64_t rx_pfc_watchdog_storms_rx_packets_dropped_pri7; + /* + * Total number of bytes dropped on rx during PFC watchdog storm + * for pri 0 + */ + uint64_t rx_pfc_watchdog_storms_rx_bytes_dropped_pri0; + /* + * Total number of bytes dropped on rx during PFC watchdog storm + * for pri 1 + */ + uint64_t rx_pfc_watchdog_storms_rx_bytes_dropped_pri1; + /* + * Total number of bytes dropped on rx during PFC watchdog storm + * for pri 2 + */ + uint64_t rx_pfc_watchdog_storms_rx_bytes_dropped_pri2; + /* + * Total number of bytes dropped on rx during PFC watchdog storm + * for pri 3 + */ + uint64_t rx_pfc_watchdog_storms_rx_bytes_dropped_pri3; + /* + * Total number of bytes dropped on rx during PFC watchdog storm + * for pri 4 + */ + uint64_t rx_pfc_watchdog_storms_rx_bytes_dropped_pri4; + /* + * Total number of bytes dropped on rx during PFC watchdog storm + * for pri 5 + */ + uint64_t rx_pfc_watchdog_storms_rx_bytes_dropped_pri5; + /* + * Total number of bytes dropped on rx during PFC watchdog storm + * for pri 6 + */ + uint64_t rx_pfc_watchdog_storms_rx_bytes_dropped_pri6; + /* + * Total number of bytes dropped on rx during PFC watchdog storm + * for pri 7 + */ + uint64_t rx_pfc_watchdog_storms_rx_bytes_dropped_pri7; + /* + * Number of packets received during last PFC watchdog storm + * for pri 0 + */ + uint64_t rx_pfc_watchdog_last_storm_rx_packets_pri0; + /* + * Number of packets received during last PFC watchdog storm + * for pri 1 + */ + uint64_t rx_pfc_watchdog_last_storm_rx_packets_pri1; + /* + * Number of packets received during last PFC watchdog storm + * for pri 2 + */ + uint64_t rx_pfc_watchdog_last_storm_rx_packets_pri2; + /* + * Number of packets received during last PFC watchdog storm + * for pri 3 + */ + uint64_t rx_pfc_watchdog_last_storm_rx_packets_pri3; + /* + * Number of packets received during last PFC watchdog storm + * for pri 4 + */ + uint64_t rx_pfc_watchdog_last_storm_rx_packets_pri4; + /* + * Number of packets received during last PFC watchdog storm + * for pri 5 + */ + uint64_t rx_pfc_watchdog_last_storm_rx_packets_pri5; + /* + * Number of packets received during last PFC watchdog storm + * for pri 6 + */ + uint64_t rx_pfc_watchdog_last_storm_rx_packets_pri6; + /* + * Number of packets received during last PFC watchdog storm + * for pri 7 + */ + uint64_t rx_pfc_watchdog_last_storm_rx_packets_pri7; + /* + * Number of bytes received during last PFC watchdog storm + * for pri 0 + */ + uint64_t rx_pfc_watchdog_last_storm_rx_bytes_pri0; + /* + * Number of bytes received during last PFC watchdog storm + * for pri 1 + */ + uint64_t rx_pfc_watchdog_last_storm_rx_bytes_pri1; + /* + * Number of bytes received during last PFC watchdog storm + * for pri 2 + */ + uint64_t rx_pfc_watchdog_last_storm_rx_bytes_pri2; + /* + * Number of bytes received during last PFC watchdog storm + * for pri 3 + */ + uint64_t rx_pfc_watchdog_last_storm_rx_bytes_pri3; + /* + * Number of bytes received during last PFC watchdog storm + * for pri 4 + */ + uint64_t rx_pfc_watchdog_last_storm_rx_bytes_pri4; + /* + * Number of bytes received during last PFC watchdog storm + * for pri 5 + */ + uint64_t rx_pfc_watchdog_last_storm_rx_bytes_pri5; + /* + * Number of bytes received during last PFC watchdog storm + * for pri 6 + */ + uint64_t rx_pfc_watchdog_last_storm_rx_bytes_pri6; + /* + * Number of bytes received during last PFC watchdog storm + * for pri 7 + */ + uint64_t rx_pfc_watchdog_last_storm_rx_bytes_pri7; + /* + * Number of packets dropped on rx during last PFC watchdog storm + * for pri 0 + */ + uint64_t rx_pfc_watchdog_last_storm_rx_packets_dropped_pri0; + /* + * Number of packets dropped on rx during last PFC watchdog storm + * for pri 1 + */ + uint64_t rx_pfc_watchdog_last_storm_rx_packets_dropped_pri1; + /* + * Number of packets dropped on rx during last PFC watchdog storm + * for pri 2 + */ + uint64_t rx_pfc_watchdog_last_storm_rx_packets_dropped_pri2; + /* + * Number of packets dropped on rx during last PFC watchdog storm + * for pri 3 + */ + uint64_t rx_pfc_watchdog_last_storm_rx_packets_dropped_pri3; + /* + * Number of packets dropped on rx during last PFC watchdog storm + * for pri 4 + */ + uint64_t rx_pfc_watchdog_last_storm_rx_packets_dropped_pri4; + /* + * Number of packets dropped on rx during last PFC watchdog storm + * for pri 5 + */ + uint64_t rx_pfc_watchdog_last_storm_rx_packets_dropped_pri5; + /* + * Number of packets dropped on rx during last PFC watchdog storm + * for pri 6 + */ + uint64_t rx_pfc_watchdog_last_storm_rx_packets_dropped_pri6; + /* + * Number of packets dropped on rx during last PFC watchdog storm + * for pri 7 + */ + uint64_t rx_pfc_watchdog_last_storm_rx_packets_dropped_pri7; + /* + * Total number of bytes dropped on rx during PFC watchdog storm + * for pri 0 + */ + uint64_t rx_pfc_watchdog_last_storm_rx_bytes_dropped_pri0; + /* + * Number of bytes dropped on rx during last PFC watchdog storm + * for pri 1 + */ + uint64_t rx_pfc_watchdog_last_storm_rx_bytes_dropped_pri1; + /* + * Number of bytes dropped on rx during last PFC watchdog storm + * for pri 2 + */ + uint64_t rx_pfc_watchdog_last_storm_rx_bytes_dropped_pri2; + /* + * Number of bytes dropped on rx during last PFC watchdog storm + * for pri 3 + */ + uint64_t rx_pfc_watchdog_last_storm_rx_bytes_dropped_pri3; + /* + * Number of bytes dropped on rx during last PFC watchdog storm + * for pri 4 + */ + uint64_t rx_pfc_watchdog_last_storm_rx_bytes_dropped_pri4; + /* + * Number of bytes dropped on rx during last PFC watchdog storm + * for pri 5 + */ + uint64_t rx_pfc_watchdog_last_storm_rx_bytes_dropped_pri5; + /* + * Number of bytes dropped on rx during last PFC watchdog storm + * for pri 6 + */ + uint64_t rx_pfc_watchdog_last_storm_rx_bytes_dropped_pri6; + /* + * Number of bytes dropped on rx during last PFC watchdog storm + * for pri 7 + */ + uint64_t rx_pfc_watchdog_last_storm_rx_bytes_dropped_pri7; +} __rte_packed; + +/************************ + * hwrm_port_qstats_ext * + ************************/ + + +/* hwrm_port_qstats_ext_input (size:320b/40B) */ +struct hwrm_port_qstats_ext_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* Port ID of port that is being queried. */ + uint16_t port_id; + /* + * The size of TX port extended + * statistics block in bytes. + */ + uint16_t tx_stat_size; + /* + * The size of RX port extended + * statistics block in bytes + */ + uint16_t rx_stat_size; + uint8_t flags; + /* This value is not used to avoid backward compatibility issues. */ + #define HWRM_PORT_QSTATS_EXT_INPUT_FLAGS_UNUSED UINT32_C(0x0) + /* + * This bit is set to 1 when request is for the counter mask, + * representing width of each of the stats counters, rather than + * counters themselves. + */ + #define HWRM_PORT_QSTATS_EXT_INPUT_FLAGS_COUNTER_MASK UINT32_C(0x1) + #define HWRM_PORT_QSTATS_EXT_INPUT_FLAGS_LAST \ + HWRM_PORT_QSTATS_EXT_INPUT_FLAGS_COUNTER_MASK + uint8_t unused_0; + /* + * This is the host address where + * Tx port statistics will be stored + */ + uint64_t tx_stat_host_addr; + /* + * This is the host address where + * Rx port statistics will be stored + */ + uint64_t rx_stat_host_addr; +} __rte_packed; + +/* hwrm_port_qstats_ext_output (size:128b/16B) */ +struct hwrm_port_qstats_ext_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* The size of TX port statistics block in bytes. */ + uint16_t tx_stat_size; + /* The size of RX port statistics block in bytes. */ + uint16_t rx_stat_size; + /* Total number of active cos queues available. */ + uint16_t total_active_cos_queues; + uint8_t flags; + /* + * If set to 1, then this field indicates that clear + * roce specific counters is supported. + */ + #define HWRM_PORT_QSTATS_EXT_OUTPUT_FLAGS_CLEAR_ROCE_COUNTERS_SUPPORTED \ UINT32_C(0x1) - /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_LVL_2 \ - UINT32_C(0x2) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_LAST \ - HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_LVL_2 - /* Timer page size. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_MASK \ - UINT32_C(0xf0) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_SFT 4 - /* 4KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_4K \ - (UINT32_C(0x0) << 4) - /* 8KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_8K \ - (UINT32_C(0x1) << 4) - /* 64KB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_64K \ - (UINT32_C(0x2) << 4) - /* 2MB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_2M \ - (UINT32_C(0x3) << 4) - /* 8MB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_8M \ - (UINT32_C(0x4) << 4) - /* 1GB. */ - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_1G \ - (UINT32_C(0x5) << 4) - #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_LAST \ - HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_1G - /* QP page directory. */ - uint64_t qpc_page_dir; - /* SRQ page directory. */ - uint64_t srq_page_dir; - /* CQ page directory. */ - uint64_t cq_page_dir; - /* VNIC page directory. */ - uint64_t vnic_page_dir; - /* Stat page directory. */ - uint64_t stat_page_dir; - /* TQM slowpath page directory. */ - uint64_t tqm_sp_page_dir; - /* TQM ring 0 page directory. */ - uint64_t tqm_ring0_page_dir; - /* TQM ring 1 page directory. */ - uint64_t tqm_ring1_page_dir; - /* TQM ring 2 page directory. */ - uint64_t tqm_ring2_page_dir; - /* TQM ring 3 page directory. */ - uint64_t tqm_ring3_page_dir; - /* TQM ring 4 page directory. */ - uint64_t tqm_ring4_page_dir; - /* TQM ring 5 page directory. */ - uint64_t tqm_ring5_page_dir; - /* TQM ring 6 page directory. */ - uint64_t tqm_ring6_page_dir; - /* TQM ring 7 page directory. */ - uint64_t tqm_ring7_page_dir; - /* MR/AV page directory. */ - uint64_t mrav_page_dir; - /* Timer page directory. */ - uint64_t tim_page_dir; - /* Number of QPs. */ - uint32_t qp_num_entries; - /* Number of SRQs. */ - uint32_t srq_num_entries; - /* Number of CQs. */ - uint32_t cq_num_entries; - /* Number of Stats. */ - uint32_t stat_num_entries; /* - * Number of TQM slowpath entries. - * - * TQM slowpath rings should be sized as follows: - * - * num_entries = num_vnics + num_l2_tx_rings + num_roce_qps + tqm_min_size - * - * Where: - * num_vnics is the number of VNICs allocated in the VNIC backing store - * num_l2_tx_rings is the number of L2 rings in the QP backing store - * num_roce_qps is the number of RoCE QPs in the QP backing store - * tqm_min_size is tqm_min_entries_per_ring reported by - * HWRM_FUNC_BACKING_STORE_QCAPS - * - * Note that TQM ring sizes cannot be extended while the system is - * operational. If a PF driver needs to extend a TQM ring, it needs - * to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate - * the backing store. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/******************************* + * hwrm_port_qstats_ext_pfc_wd * + *******************************/ + + +/* hwrm_port_qstats_ext_pfc_wd_input (size:256b/32B) */ +struct hwrm_port_qstats_ext_pfc_wd_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* Port ID of port that is being queried. */ + uint16_t port_id; + /* + * The size of rx_port_stats_ext_pfc_wd + * block in bytes + */ + uint16_t pfc_wd_stat_size; + uint8_t unused_0[4]; + /* + * This is the host address where + * rx_port_stats_ext_pfc_wd will be stored + */ + uint64_t pfc_wd_stat_host_addr; +} __rte_packed; + +/* hwrm_port_qstats_ext_pfc_wd_output (size:128b/16B) */ +struct hwrm_port_qstats_ext_pfc_wd_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* + * The size of rx_port_stats_ext_pfc_wd + * statistics block in bytes. + */ + uint16_t pfc_wd_stat_size; + uint8_t flags; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; + uint8_t unused_0[4]; +} __rte_packed; + +/************************* + * hwrm_port_lpbk_qstats * + *************************/ + + +/* hwrm_port_lpbk_qstats_input (size:128b/16B) */ +struct hwrm_port_lpbk_qstats_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; +} __rte_packed; + +/* hwrm_port_lpbk_qstats_output (size:768b/96B) */ +struct hwrm_port_lpbk_qstats_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* Number of transmitted unicast frames */ + uint64_t lpbk_ucast_frames; + /* Number of transmitted multicast frames */ + uint64_t lpbk_mcast_frames; + /* Number of transmitted broadcast frames */ + uint64_t lpbk_bcast_frames; + /* Number of transmitted bytes for unicast traffic */ + uint64_t lpbk_ucast_bytes; + /* Number of transmitted bytes for multicast traffic */ + uint64_t lpbk_mcast_bytes; + /* Number of transmitted bytes for broadcast traffic */ + uint64_t lpbk_bcast_bytes; + /* Total Tx Drops for loopback traffic reported by STATS block */ + uint64_t tx_stat_discard; + /* Total Tx Error Drops for loopback traffic reported by STATS block */ + uint64_t tx_stat_error; + /* Total Rx Drops for loopback traffic reported by STATS block */ + uint64_t rx_stat_discard; + /* Total Rx Error Drops for loopback traffic reported by STATS block */ + uint64_t rx_stat_error; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - uint32_t tqm_sp_num_entries; + uint8_t valid; +} __rte_packed; + +/************************ + * hwrm_port_ecn_qstats * + ************************/ + + +/* hwrm_port_ecn_qstats_input (size:192b/24B) */ +struct hwrm_port_ecn_qstats_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * Number of TQM ring 0 entries. - * - * TQM fastpath rings should be sized large enough to accommodate the - * maximum number of QPs (either L2 or RoCE, or both if shared) - * that can be enqueued to the TQM ring. - * - * Note that TQM ring sizes cannot be extended while the system is - * operational. If a PF driver needs to extend a TQM ring, it needs - * to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate - * the backing store. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - uint32_t tqm_ring0_num_entries; + uint16_t cmpl_ring; /* - * Number of TQM ring 1 entries. - * - * TQM fastpath rings should be sized large enough to accommodate the - * maximum number of QPs (either L2 or RoCE, or both if shared) - * that can be enqueued to the TQM ring. - * - * Note that TQM ring sizes cannot be extended while the system is - * operational. If a PF driver needs to extend a TQM ring, it needs - * to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate - * the backing store. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - uint32_t tqm_ring1_num_entries; + uint16_t seq_id; /* - * Number of TQM ring 2 entries. - * - * TQM fastpath rings should be sized large enough to accommodate the - * maximum number of QPs (either L2 or RoCE, or both if shared) - * that can be enqueued to the TQM ring. - * - * Note that TQM ring sizes cannot be extended while the system is - * operational. If a PF driver needs to extend a TQM ring, it needs - * to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate - * the backing store. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - uint32_t tqm_ring2_num_entries; + uint16_t target_id; /* - * Number of TQM ring 3 entries. - * - * TQM fastpath rings should be sized large enough to accommodate the - * maximum number of QPs (either L2 or RoCE, or both if shared) - * that can be enqueued to the TQM ring. - * - * Note that TQM ring sizes cannot be extended while the system is - * operational. If a PF driver needs to extend a TQM ring, it needs - * to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate - * the backing store. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - uint32_t tqm_ring3_num_entries; + uint64_t resp_addr; /* - * Number of TQM ring 4 entries. - * - * TQM fastpath rings should be sized large enough to accommodate the - * maximum number of QPs (either L2 or RoCE, or both if shared) - * that can be enqueued to the TQM ring. - * - * Note that TQM ring sizes cannot be extended while the system is - * operational. If a PF driver needs to extend a TQM ring, it needs - * to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate - * the backing store. + * Port ID of port that is being queried. Unused if NIC is in + * multi-host mode. */ - uint32_t tqm_ring4_num_entries; + uint16_t port_id; + uint8_t unused_0[6]; +} __rte_packed; + +/* hwrm_port_ecn_qstats_output (size:384b/48B) */ +struct hwrm_port_ecn_qstats_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* Number of packets marked in CoS queue 0. */ + uint32_t mark_cnt_cos0; + /* Number of packets marked in CoS queue 1. */ + uint32_t mark_cnt_cos1; + /* Number of packets marked in CoS queue 2. */ + uint32_t mark_cnt_cos2; + /* Number of packets marked in CoS queue 3. */ + uint32_t mark_cnt_cos3; + /* Number of packets marked in CoS queue 4. */ + uint32_t mark_cnt_cos4; + /* Number of packets marked in CoS queue 5. */ + uint32_t mark_cnt_cos5; + /* Number of packets marked in CoS queue 6. */ + uint32_t mark_cnt_cos6; + /* Number of packets marked in CoS queue 7. */ + uint32_t mark_cnt_cos7; + /* + * Bitmask that indicates which CoS queues have ECN marking enabled. + * Bit i corresponds to CoS queue i. + */ + uint8_t mark_en; + uint8_t unused_0[6]; /* - * Number of TQM ring 5 entries. - * - * TQM fastpath rings should be sized large enough to accommodate the - * maximum number of QPs (either L2 or RoCE, or both if shared) - * that can be enqueued to the TQM ring. - * - * Note that TQM ring sizes cannot be extended while the system is - * operational. If a PF driver needs to extend a TQM ring, it needs - * to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate - * the backing store. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - uint32_t tqm_ring5_num_entries; + uint8_t valid; +} __rte_packed; + +/*********************** + * hwrm_port_clr_stats * + ***********************/ + + +/* hwrm_port_clr_stats_input (size:192b/24B) */ +struct hwrm_port_clr_stats_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * Number of TQM ring 6 entries. - * - * TQM fastpath rings should be sized large enough to accommodate the - * maximum number of QPs (either L2 or RoCE, or both if shared) - * that can be enqueued to the TQM ring. - * - * Note that TQM ring sizes cannot be extended while the system is - * operational. If a PF driver needs to extend a TQM ring, it needs - * to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate - * the backing store. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - uint32_t tqm_ring6_num_entries; + uint16_t cmpl_ring; /* - * Number of TQM ring 7 entries. - * - * TQM fastpath rings should be sized large enough to accommodate the - * maximum number of QPs (either L2 or RoCE, or both if shared) - * that can be enqueued to the TQM ring. - * - * Note that TQM ring sizes cannot be extended while the system is - * operational. If a PF driver needs to extend a TQM ring, it needs - * to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate - * the backing store. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - uint32_t tqm_ring7_num_entries; - /* Number of MR/AV entries. */ - uint32_t mrav_num_entries; - /* Number of Timer entries. */ - uint32_t tim_num_entries; - /* Number of entries to reserve for QP1 */ - uint16_t qp_num_qp1_entries; - /* Number of entries to reserve for L2 */ - uint16_t qp_num_l2_entries; - /* Number of bytes that have been allocated for each context entry. */ - uint16_t qp_entry_size; - /* Number of entries to reserve for L2 */ - uint16_t srq_num_l2_entries; - /* Number of bytes that have been allocated for each context entry. */ - uint16_t srq_entry_size; - /* Number of entries to reserve for L2 */ - uint16_t cq_num_l2_entries; - /* Number of bytes that have been allocated for each context entry. */ - uint16_t cq_entry_size; - /* Number of entries to reserve for VNIC entries */ - uint16_t vnic_num_vnic_entries; - /* Number of entries to reserve for Ring table entries */ - uint16_t vnic_num_ring_table_entries; - /* Number of bytes that have been allocated for each context entry. */ - uint16_t vnic_entry_size; - /* Number of bytes that have been allocated for each context entry. */ - uint16_t stat_entry_size; - /* Number of bytes that have been allocated for each context entry. */ - uint16_t tqm_entry_size; - /* Number of bytes that have been allocated for each context entry. */ - uint16_t mrav_entry_size; - /* Number of bytes that have been allocated for each context entry. */ - uint16_t tim_entry_size; -} __attribute__((packed)); + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* Port ID of port that is being queried. */ + uint16_t port_id; + uint8_t flags; + /* + * If set to 1, then this field indicates clear the following RoCE + * specific counters. + * RoCE associated TX/RX cos counters + * CNP associated TX/RX cos counters + * RoCE/CNP specific TX/RX flow counters + * Firmware will determine the RoCE/CNP cos queue based on qos profile. + * This flag is honored only when RoCE is enabled on that port. + */ + #define HWRM_PORT_CLR_STATS_INPUT_FLAGS_ROCE_COUNTERS UINT32_C(0x1) + uint8_t unused_0[5]; +} __rte_packed; -/* hwrm_func_backing_store_cfg_output (size:128b/16B) */ -struct hwrm_func_backing_store_cfg_output { +/* hwrm_port_clr_stats_output (size:128b/16B) */ +struct hwrm_port_clr_stats_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -8971,15 +18998,15 @@ struct hwrm_func_backing_store_cfg_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/******************************** - * hwrm_func_backing_store_qcfg * - ********************************/ +/*********************** + * hwrm_port_phy_qcaps * + ***********************/ -/* hwrm_func_backing_store_qcfg_input (size:128b/16B) */ -struct hwrm_func_backing_store_qcfg_input { +/* hwrm_port_phy_qcaps_input (size:192b/24B) */ +struct hwrm_port_phy_qcaps_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -8996,7 +19023,8 @@ struct hwrm_func_backing_store_qcfg_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -9007,855 +19035,1730 @@ struct hwrm_func_backing_store_qcfg_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; -} __attribute__((packed)); + /* Port ID of port that is being queried. */ + uint16_t port_id; + uint8_t unused_0[6]; +} __rte_packed; -/* hwrm_func_backing_store_qcfg_output (size:1920b/240B) */ -struct hwrm_func_backing_store_qcfg_output { - /* The specific error status for the command. */ - uint16_t error_code; - /* The HWRM command request type. */ - uint16_t req_type; - /* The sequence ID from the original command. */ - uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; - uint32_t flags; - /* - * When set, the firmware only uses on-chip resources and does not - * expect any backing store to be provided by the host driver. This - * mode provides minimal L2 functionality (e.g. limited L2 resources, - * no RoCE). - */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_FLAGS_PREBOOT_MODE \ - UINT32_C(0x1) - uint8_t unused_0[4]; - /* - * This bit must be '1' for the qp fields to be - * configured. - */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_QP \ - UINT32_C(0x1) - /* - * This bit must be '1' for the srq fields to be - * configured. - */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_SRQ \ - UINT32_C(0x2) - /* - * This bit must be '1' for the cq fields to be - * configured. - */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_CQ \ - UINT32_C(0x4) - /* - * This bit must be '1' for the vnic fields to be - * configured. - */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_VNIC \ - UINT32_C(0x8) - /* - * This bit must be '1' for the stat fields to be - * configured. - */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_STAT \ - UINT32_C(0x10) - /* - * This bit must be '1' for the tqm_sp fields to be - * configured. - */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_SP \ - UINT32_C(0x20) - /* - * This bit must be '1' for the tqm_ring0 fields to be - * configured. - */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING0 \ - UINT32_C(0x40) - /* - * This bit must be '1' for the tqm_ring1 fields to be - * configured. - */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING1 \ - UINT32_C(0x80) - /* - * This bit must be '1' for the tqm_ring2 fields to be - * configured. - */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING2 \ - UINT32_C(0x100) - /* - * This bit must be '1' for the tqm_ring3 fields to be - * configured. - */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING3 \ - UINT32_C(0x200) - /* - * This bit must be '1' for the tqm_ring4 fields to be - * configured. - */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING4 \ - UINT32_C(0x400) - /* - * This bit must be '1' for the tqm_ring5 fields to be - * configured. - */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING5 \ - UINT32_C(0x800) - /* - * This bit must be '1' for the tqm_ring6 fields to be - * configured. - */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING6 \ - UINT32_C(0x1000) - /* - * This bit must be '1' for the tqm_ring7 fields to be - * configured. - */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING7 \ - UINT32_C(0x2000) - /* - * This bit must be '1' for the mrav fields to be - * configured. - */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_MRAV \ - UINT32_C(0x4000) - /* - * This bit must be '1' for the tim fields to be - * configured. - */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TIM \ - UINT32_C(0x8000) - /* QPC page size and level. */ - uint8_t qpc_pg_size_qpc_lvl; - /* QPC PBL indirect levels. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_MASK \ - UINT32_C(0xf) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_SFT 0 - /* PBL pointer is physical start address. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_LVL_0 \ - UINT32_C(0x0) - /* PBL pointer points to PTE table. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_LVL_1 \ - UINT32_C(0x1) - /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_LVL_2 \ - UINT32_C(0x2) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_LAST \ - HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_LVL_2 - /* QPC page size. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_MASK \ - UINT32_C(0xf0) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_SFT 4 - /* 4KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_4K \ - (UINT32_C(0x0) << 4) - /* 8KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_8K \ - (UINT32_C(0x1) << 4) - /* 64KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_64K \ - (UINT32_C(0x2) << 4) - /* 2MB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_2M \ - (UINT32_C(0x3) << 4) - /* 8MB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_8M \ - (UINT32_C(0x4) << 4) - /* 1GB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_1G \ - (UINT32_C(0x5) << 4) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_LAST \ - HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_1G - /* SRQ page size and level. */ - uint8_t srq_pg_size_srq_lvl; - /* SRQ PBL indirect levels. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_MASK \ - UINT32_C(0xf) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_SFT 0 - /* PBL pointer is physical start address. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_LVL_0 \ - UINT32_C(0x0) - /* PBL pointer points to PTE table. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_LVL_1 \ - UINT32_C(0x1) - /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_LVL_2 \ - UINT32_C(0x2) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_LAST \ - HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_LVL_2 - /* SRQ page size. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_MASK \ - UINT32_C(0xf0) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_SFT 4 - /* 4KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_4K \ - (UINT32_C(0x0) << 4) - /* 8KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_8K \ - (UINT32_C(0x1) << 4) - /* 64KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_64K \ - (UINT32_C(0x2) << 4) - /* 2MB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_2M \ - (UINT32_C(0x3) << 4) - /* 8MB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_8M \ - (UINT32_C(0x4) << 4) - /* 1GB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_1G \ - (UINT32_C(0x5) << 4) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_LAST \ - HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_1G - /* CQ page size and level. */ - uint8_t cq_pg_size_cq_lvl; - /* CQ PBL indirect levels. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_MASK \ - UINT32_C(0xf) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_SFT 0 - /* PBL pointer is physical start address. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_LVL_0 \ - UINT32_C(0x0) - /* PBL pointer points to PTE table. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_LVL_1 \ - UINT32_C(0x1) - /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_LVL_2 \ - UINT32_C(0x2) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_LAST \ - HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_LVL_2 - /* CQ page size. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_MASK \ - UINT32_C(0xf0) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_SFT 4 - /* 4KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_4K \ - (UINT32_C(0x0) << 4) - /* 8KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_8K \ - (UINT32_C(0x1) << 4) - /* 64KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_64K \ - (UINT32_C(0x2) << 4) - /* 2MB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_2M \ - (UINT32_C(0x3) << 4) - /* 8MB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_8M \ - (UINT32_C(0x4) << 4) - /* 1GB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_1G \ - (UINT32_C(0x5) << 4) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_LAST \ - HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_1G - /* VNIC page size and level. */ - uint8_t vnic_pg_size_vnic_lvl; - /* VNIC PBL indirect levels. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_MASK \ - UINT32_C(0xf) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_SFT 0 - /* PBL pointer is physical start address. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_LVL_0 \ - UINT32_C(0x0) - /* PBL pointer points to PTE table. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_LVL_1 \ +/* hwrm_port_phy_qcaps_output (size:192b/24B) */ +struct hwrm_port_phy_qcaps_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* PHY capability flags */ + uint8_t flags; + /* + * If set to 1, then this field indicates that the + * link is capable of supporting EEE. + */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_EEE_SUPPORTED \ UINT32_C(0x1) - /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_LVL_2 \ + /* + * If set to 1, then this field indicates that the + * PHY is capable of supporting external loopback. + */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_EXTERNAL_LPBK_SUPPORTED \ UINT32_C(0x2) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_LAST \ - HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_LVL_2 - /* VNIC page size. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_MASK \ + /* + * If set to 1, then this field indicates that the + * PHY is capable of supporting loopback in autoneg mode. + */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_AUTONEG_LPBK_SUPPORTED \ + UINT32_C(0x4) + /* + * Indicates if the configuration of shared PHY settings is supported. + * In cases where a physical port is shared by multiple functions + * (e.g. NPAR, multihost, etc), the configuration of PHY + * settings may not be allowed. Callers to HWRM_PORT_PHY_CFG will + * get an HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED error in this case. + */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_SHARED_PHY_CFG_SUPPORTED \ + UINT32_C(0x8) + /* + * Reserved field. The HWRM shall set this field to 0. + * An HWRM client shall ignore this field. + */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_RSVD1_MASK \ UINT32_C(0xf0) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_SFT 4 - /* 4KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_4K \ - (UINT32_C(0x0) << 4) - /* 8KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_8K \ - (UINT32_C(0x1) << 4) - /* 64KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_64K \ - (UINT32_C(0x2) << 4) - /* 2MB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_2M \ - (UINT32_C(0x3) << 4) - /* 8MB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_8M \ - (UINT32_C(0x4) << 4) - /* 1GB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_1G \ - (UINT32_C(0x5) << 4) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_LAST \ - HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_1G - /* Stat page size and level. */ - uint8_t stat_pg_size_stat_lvl; - /* Stat PBL indirect levels. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_MASK \ - UINT32_C(0xf) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_SFT 0 - /* PBL pointer is physical start address. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_LVL_0 \ - UINT32_C(0x0) - /* PBL pointer points to PTE table. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_LVL_1 \ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_RSVD1_SFT 4 + /* Number of front panel ports for this device. */ + uint8_t port_cnt; + /* Not supported or unknown */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_UNKNOWN UINT32_C(0x0) + /* single port device */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_1 UINT32_C(0x1) + /* 2-port device */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_2 UINT32_C(0x2) + /* 3-port device */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_3 UINT32_C(0x3) + /* 4-port device */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_4 UINT32_C(0x4) + #define HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_LAST \ + HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_4 + /* + * This is a bit mask to indicate what speeds are supported + * as forced speeds on this link. + * For each speed that can be forced on this link, the + * corresponding mask bit shall be set to '1'. + */ + uint16_t supported_speeds_force_mode; + /* 100Mb link speed (Half-duplex) */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_100MBHD \ UINT32_C(0x1) - /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_LVL_2 \ + /* 100Mb link speed (Full-duplex) */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_100MB \ UINT32_C(0x2) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_LAST \ - HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_LVL_2 - /* Stat page size. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_MASK \ - UINT32_C(0xf0) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_SFT 4 - /* 4KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_4K \ - (UINT32_C(0x0) << 4) - /* 8KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_8K \ - (UINT32_C(0x1) << 4) - /* 64KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_64K \ - (UINT32_C(0x2) << 4) - /* 2MB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_2M \ - (UINT32_C(0x3) << 4) - /* 8MB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_8M \ - (UINT32_C(0x4) << 4) - /* 1GB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_1G \ - (UINT32_C(0x5) << 4) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_LAST \ - HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_1G - /* TQM slow path page size and level. */ - uint8_t tqm_sp_pg_size_tqm_sp_lvl; - /* TQM slow path PBL indirect levels. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_MASK \ - UINT32_C(0xf) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_SFT 0 - /* PBL pointer is physical start address. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_LVL_0 \ - UINT32_C(0x0) - /* PBL pointer points to PTE table. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_LVL_1 \ + /* 1Gb link speed (Half-duplex) */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_1GBHD \ + UINT32_C(0x4) + /* 1Gb link speed (Full-duplex) */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_1GB \ + UINT32_C(0x8) + /* 2Gb link speed */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_2GB \ + UINT32_C(0x10) + /* 25Gb link speed */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_2_5GB \ + UINT32_C(0x20) + /* 10Gb link speed */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_10GB \ + UINT32_C(0x40) + /* 20Gb link speed */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_20GB \ + UINT32_C(0x80) + /* 25Gb link speed */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_25GB \ + UINT32_C(0x100) + /* 40Gb link speed */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_40GB \ + UINT32_C(0x200) + /* 50Gb link speed */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_50GB \ + UINT32_C(0x400) + /* 100Gb link speed */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_100GB \ + UINT32_C(0x800) + /* 10Mb link speed (Half-duplex) */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_10MBHD \ + UINT32_C(0x1000) + /* 10Mb link speed (Full-duplex) */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_10MB \ + UINT32_C(0x2000) + /* 200Gb link speed */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_200GB \ + UINT32_C(0x4000) + /* + * This is a bit mask to indicate what speeds are supported + * for autonegotiation on this link. + * For each speed that can be autonegotiated on this link, the + * corresponding mask bit shall be set to '1'. + */ + uint16_t supported_speeds_auto_mode; + /* 100Mb link speed (Half-duplex) */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_100MBHD \ UINT32_C(0x1) - /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_LVL_2 \ + /* 100Mb link speed (Full-duplex) */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_100MB \ UINT32_C(0x2) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_LAST \ - HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_LVL_2 - /* TQM slow path page size. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_MASK \ - UINT32_C(0xf0) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_SFT 4 - /* 4KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_4K \ - (UINT32_C(0x0) << 4) - /* 8KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_8K \ - (UINT32_C(0x1) << 4) - /* 64KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_64K \ - (UINT32_C(0x2) << 4) - /* 2MB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_2M \ - (UINT32_C(0x3) << 4) - /* 8MB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_8M \ - (UINT32_C(0x4) << 4) - /* 1GB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_1G \ - (UINT32_C(0x5) << 4) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_LAST \ - HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_1G - /* TQM ring 0 page size and level. */ - uint8_t tqm_ring0_pg_size_tqm_ring0_lvl; - /* TQM ring 0 PBL indirect levels. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_MASK \ - UINT32_C(0xf) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_SFT 0 - /* PBL pointer is physical start address. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_LVL_0 \ - UINT32_C(0x0) - /* PBL pointer points to PTE table. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_LVL_1 \ + /* 1Gb link speed (Half-duplex) */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_1GBHD \ + UINT32_C(0x4) + /* 1Gb link speed (Full-duplex) */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_1GB \ + UINT32_C(0x8) + /* 2Gb link speed */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_2GB \ + UINT32_C(0x10) + /* 25Gb link speed */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_2_5GB \ + UINT32_C(0x20) + /* 10Gb link speed */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_10GB \ + UINT32_C(0x40) + /* 20Gb link speed */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_20GB \ + UINT32_C(0x80) + /* 25Gb link speed */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_25GB \ + UINT32_C(0x100) + /* 40Gb link speed */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_40GB \ + UINT32_C(0x200) + /* 50Gb link speed */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_50GB \ + UINT32_C(0x400) + /* 100Gb link speed */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_100GB \ + UINT32_C(0x800) + /* 10Mb link speed (Half-duplex) */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_10MBHD \ + UINT32_C(0x1000) + /* 10Mb link speed (Full-duplex) */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_10MB \ + UINT32_C(0x2000) + /* 200Gb link speed */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_200GB \ + UINT32_C(0x4000) + /* + * This is a bit mask to indicate what speeds are supported + * for EEE on this link. + * For each speed that can be autonegotiated when EEE is enabled + * on this link, the corresponding mask bit shall be set to '1'. + * This field is only valid when the eee_suppotred is set to '1'. + */ + uint16_t supported_speeds_eee_mode; + /* Reserved */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_RSVD1 \ UINT32_C(0x1) - /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_LVL_2 \ + /* 100Mb link speed (Full-duplex) */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_100MB \ UINT32_C(0x2) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_LAST \ - HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_LVL_2 - /* TQM ring 0 page size. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_MASK \ - UINT32_C(0xf0) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_SFT 4 - /* 4KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_4K \ - (UINT32_C(0x0) << 4) - /* 8KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_8K \ - (UINT32_C(0x1) << 4) - /* 64KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_64K \ - (UINT32_C(0x2) << 4) - /* 2MB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_2M \ - (UINT32_C(0x3) << 4) - /* 8MB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_8M \ - (UINT32_C(0x4) << 4) - /* 1GB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_1G \ - (UINT32_C(0x5) << 4) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_LAST \ - HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_1G - /* TQM ring 1 page size and level. */ - uint8_t tqm_ring1_pg_size_tqm_ring1_lvl; - /* TQM ring 1 PBL indirect levels. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_MASK \ - UINT32_C(0xf) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_SFT 0 - /* PBL pointer is physical start address. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_LVL_0 \ - UINT32_C(0x0) - /* PBL pointer points to PTE table. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_LVL_1 \ + /* Reserved */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_RSVD2 \ + UINT32_C(0x4) + /* 1Gb link speed (Full-duplex) */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_1GB \ + UINT32_C(0x8) + /* Reserved */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_RSVD3 \ + UINT32_C(0x10) + /* Reserved */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_RSVD4 \ + UINT32_C(0x20) + /* 10Gb link speed */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_10GB \ + UINT32_C(0x40) + uint32_t tx_lpi_timer_low; + /* + * The lowest value of TX LPI timer that can be set on this link + * when EEE is enabled. This value is in microseconds. + * This field is valid only when_eee_supported is set to '1'. + */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_TX_LPI_TIMER_LOW_MASK \ + UINT32_C(0xffffff) + #define HWRM_PORT_PHY_QCAPS_OUTPUT_TX_LPI_TIMER_LOW_SFT 0 + /* + * Reserved field. The HWRM shall set this field to 0. + * An HWRM client shall ignore this field. + */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_RSVD2_MASK \ + UINT32_C(0xff000000) + #define HWRM_PORT_PHY_QCAPS_OUTPUT_RSVD2_SFT 24 + uint32_t valid_tx_lpi_timer_high; + /* + * The highest value of TX LPI timer that can be set on this link + * when EEE is enabled. This value is in microseconds. + * This field is valid only when_eee_supported is set to '1'. + */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_TX_LPI_TIMER_HIGH_MASK \ + UINT32_C(0xffffff) + #define HWRM_PORT_PHY_QCAPS_OUTPUT_TX_LPI_TIMER_HIGH_SFT 0 + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_VALID_MASK \ + UINT32_C(0xff000000) + #define HWRM_PORT_PHY_QCAPS_OUTPUT_VALID_SFT 24 +} __rte_packed; + +/**************************** + * hwrm_port_phy_mdio_write * + ****************************/ + + +/* hwrm_port_phy_mdio_write_input (size:320b/40B) */ +struct hwrm_port_phy_mdio_write_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* Reserved for future use. */ + uint32_t unused_0[2]; + /* Port ID of port. */ + uint16_t port_id; + /* If phy_address is 0xFF, port_id will be used to derive phy_addr. */ + uint8_t phy_addr; + /* 8-bit device address. */ + uint8_t dev_addr; + /* 16-bit register address. */ + uint16_t reg_addr; + /* 16-bit register data. */ + uint16_t reg_data; + /* + * When this bit is set to 1 a Clause 45 mdio access is done. + * when this bit is set to 0 a Clause 22 mdio access is done. + */ + uint8_t cl45_mdio; + /* */ + uint8_t unused_1[7]; +} __rte_packed; + +/* hwrm_port_phy_mdio_write_output (size:128b/16B) */ +struct hwrm_port_phy_mdio_write_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/*************************** + * hwrm_port_phy_mdio_read * + ***************************/ + + +/* hwrm_port_phy_mdio_read_input (size:256b/32B) */ +struct hwrm_port_phy_mdio_read_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* Reserved for future use. */ + uint32_t unused_0[2]; + /* Port ID of port. */ + uint16_t port_id; + /* If phy_address is 0xFF, port_id will be used to derive phy_addr. */ + uint8_t phy_addr; + /* 8-bit device address. */ + uint8_t dev_addr; + /* 16-bit register address. */ + uint16_t reg_addr; + /* + * When this bit is set to 1 a Clause 45 mdio access is done. + * when this bit is set to 0 a Clause 22 mdio access is done. + */ + uint8_t cl45_mdio; + /* */ + uint8_t unused_1; +} __rte_packed; + +/* hwrm_port_phy_mdio_read_output (size:128b/16B) */ +struct hwrm_port_phy_mdio_read_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* 16-bit register data. */ + uint16_t reg_data; + uint8_t unused_0[5]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/********************* + * hwrm_port_led_cfg * + *********************/ + + +/* hwrm_port_led_cfg_input (size:512b/64B) */ +struct hwrm_port_led_cfg_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + uint32_t enables; + /* + * This bit must be '1' for the led0_id field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_ID \ + UINT32_C(0x1) + /* + * This bit must be '1' for the led0_state field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_STATE \ + UINT32_C(0x2) + /* + * This bit must be '1' for the led0_color field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_COLOR \ + UINT32_C(0x4) + /* + * This bit must be '1' for the led0_blink_on field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_ON \ + UINT32_C(0x8) + /* + * This bit must be '1' for the led0_blink_off field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_OFF \ + UINT32_C(0x10) + /* + * This bit must be '1' for the led0_group_id field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_GROUP_ID \ + UINT32_C(0x20) + /* + * This bit must be '1' for the led1_id field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_ID \ + UINT32_C(0x40) + /* + * This bit must be '1' for the led1_state field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_STATE \ + UINT32_C(0x80) + /* + * This bit must be '1' for the led1_color field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_COLOR \ + UINT32_C(0x100) + /* + * This bit must be '1' for the led1_blink_on field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_BLINK_ON \ + UINT32_C(0x200) + /* + * This bit must be '1' for the led1_blink_off field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_BLINK_OFF \ + UINT32_C(0x400) + /* + * This bit must be '1' for the led1_group_id field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_GROUP_ID \ + UINT32_C(0x800) + /* + * This bit must be '1' for the led2_id field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_ID \ + UINT32_C(0x1000) + /* + * This bit must be '1' for the led2_state field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_STATE \ + UINT32_C(0x2000) + /* + * This bit must be '1' for the led2_color field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_COLOR \ + UINT32_C(0x4000) + /* + * This bit must be '1' for the led2_blink_on field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_BLINK_ON \ + UINT32_C(0x8000) + /* + * This bit must be '1' for the led2_blink_off field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_BLINK_OFF \ + UINT32_C(0x10000) + /* + * This bit must be '1' for the led2_group_id field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_GROUP_ID \ + UINT32_C(0x20000) + /* + * This bit must be '1' for the led3_id field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_ID \ + UINT32_C(0x40000) + /* + * This bit must be '1' for the led3_state field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_STATE \ + UINT32_C(0x80000) + /* + * This bit must be '1' for the led3_color field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_COLOR \ + UINT32_C(0x100000) + /* + * This bit must be '1' for the led3_blink_on field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_BLINK_ON \ + UINT32_C(0x200000) + /* + * This bit must be '1' for the led3_blink_off field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_BLINK_OFF \ + UINT32_C(0x400000) + /* + * This bit must be '1' for the led3_group_id field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_GROUP_ID \ + UINT32_C(0x800000) + /* Port ID of port whose LEDs are configured. */ + uint16_t port_id; + /* + * The number of LEDs that are being configured. + * Up to 4 LEDs can be configured with this command. + */ + uint8_t num_leds; + /* Reserved field. */ + uint8_t rsvd; + /* An identifier for the LED #0. */ + uint8_t led0_id; + /* The requested state of the LED #0. */ + uint8_t led0_state; + /* Default state of the LED */ + #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_DEFAULT UINT32_C(0x0) + /* Off */ + #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_OFF UINT32_C(0x1) + /* On */ + #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_ON UINT32_C(0x2) + /* Blink */ + #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_BLINK UINT32_C(0x3) + /* Blink Alternately */ + #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_BLINKALT UINT32_C(0x4) + #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_LAST \ + HWRM_PORT_LED_CFG_INPUT_LED0_STATE_BLINKALT + /* The requested color of LED #0. */ + uint8_t led0_color; + /* Default */ + #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_DEFAULT UINT32_C(0x0) + /* Amber */ + #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_AMBER UINT32_C(0x1) + /* Green */ + #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_GREEN UINT32_C(0x2) + /* Green or Amber */ + #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_GREENAMBER UINT32_C(0x3) + #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_LAST \ + HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_GREENAMBER + uint8_t unused_0; + /* + * If the LED #0 state is "blink" or "blinkalt", then + * this field represents the requested time in milliseconds + * to keep LED on between cycles. + */ + uint16_t led0_blink_on; + /* + * If the LED #0 state is "blink" or "blinkalt", then + * this field represents the requested time in milliseconds + * to keep LED off between cycles. + */ + uint16_t led0_blink_off; + /* + * An identifier for the group of LEDs that LED #0 belongs + * to. + * If set to 0, then the LED #0 shall not be grouped and + * shall be treated as an individual resource. + * For all other non-zero values of this field, LED #0 shall + * be grouped together with the LEDs with the same group ID + * value. + */ + uint8_t led0_group_id; + /* Reserved field. */ + uint8_t rsvd0; + /* An identifier for the LED #1. */ + uint8_t led1_id; + /* The requested state of the LED #1. */ + uint8_t led1_state; + /* Default state of the LED */ + #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_DEFAULT UINT32_C(0x0) + /* Off */ + #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_OFF UINT32_C(0x1) + /* On */ + #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_ON UINT32_C(0x2) + /* Blink */ + #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_BLINK UINT32_C(0x3) + /* Blink Alternately */ + #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_BLINKALT UINT32_C(0x4) + #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_LAST \ + HWRM_PORT_LED_CFG_INPUT_LED1_STATE_BLINKALT + /* The requested color of LED #1. */ + uint8_t led1_color; + /* Default */ + #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_DEFAULT UINT32_C(0x0) + /* Amber */ + #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_AMBER UINT32_C(0x1) + /* Green */ + #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_GREEN UINT32_C(0x2) + /* Green or Amber */ + #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_GREENAMBER UINT32_C(0x3) + #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_LAST \ + HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_GREENAMBER + uint8_t unused_1; + /* + * If the LED #1 state is "blink" or "blinkalt", then + * this field represents the requested time in milliseconds + * to keep LED on between cycles. + */ + uint16_t led1_blink_on; + /* + * If the LED #1 state is "blink" or "blinkalt", then + * this field represents the requested time in milliseconds + * to keep LED off between cycles. + */ + uint16_t led1_blink_off; + /* + * An identifier for the group of LEDs that LED #1 belongs + * to. + * If set to 0, then the LED #1 shall not be grouped and + * shall be treated as an individual resource. + * For all other non-zero values of this field, LED #1 shall + * be grouped together with the LEDs with the same group ID + * value. + */ + uint8_t led1_group_id; + /* Reserved field. */ + uint8_t rsvd1; + /* An identifier for the LED #2. */ + uint8_t led2_id; + /* The requested state of the LED #2. */ + uint8_t led2_state; + /* Default state of the LED */ + #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_DEFAULT UINT32_C(0x0) + /* Off */ + #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_OFF UINT32_C(0x1) + /* On */ + #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_ON UINT32_C(0x2) + /* Blink */ + #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_BLINK UINT32_C(0x3) + /* Blink Alternately */ + #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_BLINKALT UINT32_C(0x4) + #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_LAST \ + HWRM_PORT_LED_CFG_INPUT_LED2_STATE_BLINKALT + /* The requested color of LED #2. */ + uint8_t led2_color; + /* Default */ + #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_DEFAULT UINT32_C(0x0) + /* Amber */ + #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_AMBER UINT32_C(0x1) + /* Green */ + #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_GREEN UINT32_C(0x2) + /* Green or Amber */ + #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_GREENAMBER UINT32_C(0x3) + #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_LAST \ + HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_GREENAMBER + uint8_t unused_2; + /* + * If the LED #2 state is "blink" or "blinkalt", then + * this field represents the requested time in milliseconds + * to keep LED on between cycles. + */ + uint16_t led2_blink_on; + /* + * If the LED #2 state is "blink" or "blinkalt", then + * this field represents the requested time in milliseconds + * to keep LED off between cycles. + */ + uint16_t led2_blink_off; + /* + * An identifier for the group of LEDs that LED #2 belongs + * to. + * If set to 0, then the LED #2 shall not be grouped and + * shall be treated as an individual resource. + * For all other non-zero values of this field, LED #2 shall + * be grouped together with the LEDs with the same group ID + * value. + */ + uint8_t led2_group_id; + /* Reserved field. */ + uint8_t rsvd2; + /* An identifier for the LED #3. */ + uint8_t led3_id; + /* The requested state of the LED #3. */ + uint8_t led3_state; + /* Default state of the LED */ + #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_DEFAULT UINT32_C(0x0) + /* Off */ + #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_OFF UINT32_C(0x1) + /* On */ + #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_ON UINT32_C(0x2) + /* Blink */ + #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_BLINK UINT32_C(0x3) + /* Blink Alternately */ + #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_BLINKALT UINT32_C(0x4) + #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_LAST \ + HWRM_PORT_LED_CFG_INPUT_LED3_STATE_BLINKALT + /* The requested color of LED #3. */ + uint8_t led3_color; + /* Default */ + #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_DEFAULT UINT32_C(0x0) + /* Amber */ + #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_AMBER UINT32_C(0x1) + /* Green */ + #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_GREEN UINT32_C(0x2) + /* Green or Amber */ + #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_GREENAMBER UINT32_C(0x3) + #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_LAST \ + HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_GREENAMBER + uint8_t unused_3; + /* + * If the LED #3 state is "blink" or "blinkalt", then + * this field represents the requested time in milliseconds + * to keep LED on between cycles. + */ + uint16_t led3_blink_on; + /* + * If the LED #3 state is "blink" or "blinkalt", then + * this field represents the requested time in milliseconds + * to keep LED off between cycles. + */ + uint16_t led3_blink_off; + /* + * An identifier for the group of LEDs that LED #3 belongs + * to. + * If set to 0, then the LED #3 shall not be grouped and + * shall be treated as an individual resource. + * For all other non-zero values of this field, LED #3 shall + * be grouped together with the LEDs with the same group ID + * value. + */ + uint8_t led3_group_id; + /* Reserved field. */ + uint8_t rsvd3; +} __rte_packed; + +/* hwrm_port_led_cfg_output (size:128b/16B) */ +struct hwrm_port_led_cfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/********************** + * hwrm_port_led_qcfg * + **********************/ + + +/* hwrm_port_led_qcfg_input (size:192b/24B) */ +struct hwrm_port_led_qcfg_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* Port ID of port whose LED configuration is being queried. */ + uint16_t port_id; + uint8_t unused_0[6]; +} __rte_packed; + +/* hwrm_port_led_qcfg_output (size:448b/56B) */ +struct hwrm_port_led_qcfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* + * The number of LEDs that are configured on this port. + * Up to 4 LEDs can be returned in the response. + */ + uint8_t num_leds; + /* An identifier for the LED #0. */ + uint8_t led0_id; + /* The type of LED #0. */ + uint8_t led0_type; + /* Speed LED */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_SPEED UINT32_C(0x0) + /* Activity LED */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_ACTIVITY UINT32_C(0x1) + /* Invalid */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_INVALID UINT32_C(0xff) + #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_LAST \ + HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_INVALID + /* The current state of the LED #0. */ + uint8_t led0_state; + /* Default state of the LED */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_DEFAULT UINT32_C(0x0) + /* Off */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_OFF UINT32_C(0x1) + /* On */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_ON UINT32_C(0x2) + /* Blink */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_BLINK UINT32_C(0x3) + /* Blink Alternately */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_BLINKALT UINT32_C(0x4) + #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_LAST \ + HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_BLINKALT + /* The color of LED #0. */ + uint8_t led0_color; + /* Default */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_DEFAULT UINT32_C(0x0) + /* Amber */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_AMBER UINT32_C(0x1) + /* Green */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_GREEN UINT32_C(0x2) + /* Green or Amber */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_GREENAMBER UINT32_C(0x3) + #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_LAST \ + HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_GREENAMBER + uint8_t unused_0; + /* + * If the LED #0 state is "blink" or "blinkalt", then + * this field represents the requested time in milliseconds + * to keep LED on between cycles. + */ + uint16_t led0_blink_on; + /* + * If the LED #0 state is "blink" or "blinkalt", then + * this field represents the requested time in milliseconds + * to keep LED off between cycles. + */ + uint16_t led0_blink_off; + /* + * An identifier for the group of LEDs that LED #0 belongs + * to. + * If set to 0, then the LED #0 is not grouped. + * For all other non-zero values of this field, LED #0 is + * grouped together with the LEDs with the same group ID + * value. + */ + uint8_t led0_group_id; + /* An identifier for the LED #1. */ + uint8_t led1_id; + /* The type of LED #1. */ + uint8_t led1_type; + /* Speed LED */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_SPEED UINT32_C(0x0) + /* Activity LED */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_ACTIVITY UINT32_C(0x1) + /* Invalid */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_INVALID UINT32_C(0xff) + #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_LAST \ + HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_INVALID + /* The current state of the LED #1. */ + uint8_t led1_state; + /* Default state of the LED */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_DEFAULT UINT32_C(0x0) + /* Off */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_OFF UINT32_C(0x1) + /* On */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_ON UINT32_C(0x2) + /* Blink */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_BLINK UINT32_C(0x3) + /* Blink Alternately */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_BLINKALT UINT32_C(0x4) + #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_LAST \ + HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_BLINKALT + /* The color of LED #1. */ + uint8_t led1_color; + /* Default */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_DEFAULT UINT32_C(0x0) + /* Amber */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_AMBER UINT32_C(0x1) + /* Green */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_GREEN UINT32_C(0x2) + /* Green or Amber */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_GREENAMBER UINT32_C(0x3) + #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_LAST \ + HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_GREENAMBER + uint8_t unused_1; + /* + * If the LED #1 state is "blink" or "blinkalt", then + * this field represents the requested time in milliseconds + * to keep LED on between cycles. + */ + uint16_t led1_blink_on; + /* + * If the LED #1 state is "blink" or "blinkalt", then + * this field represents the requested time in milliseconds + * to keep LED off between cycles. + */ + uint16_t led1_blink_off; + /* + * An identifier for the group of LEDs that LED #1 belongs + * to. + * If set to 0, then the LED #1 is not grouped. + * For all other non-zero values of this field, LED #1 is + * grouped together with the LEDs with the same group ID + * value. + */ + uint8_t led1_group_id; + /* An identifier for the LED #2. */ + uint8_t led2_id; + /* The type of LED #2. */ + uint8_t led2_type; + /* Speed LED */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_SPEED UINT32_C(0x0) + /* Activity LED */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_ACTIVITY UINT32_C(0x1) + /* Invalid */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_INVALID UINT32_C(0xff) + #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_LAST \ + HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_INVALID + /* The current state of the LED #2. */ + uint8_t led2_state; + /* Default state of the LED */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_DEFAULT UINT32_C(0x0) + /* Off */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_OFF UINT32_C(0x1) + /* On */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_ON UINT32_C(0x2) + /* Blink */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_BLINK UINT32_C(0x3) + /* Blink Alternately */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_BLINKALT UINT32_C(0x4) + #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_LAST \ + HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_BLINKALT + /* The color of LED #2. */ + uint8_t led2_color; + /* Default */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_DEFAULT UINT32_C(0x0) + /* Amber */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_AMBER UINT32_C(0x1) + /* Green */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_GREEN UINT32_C(0x2) + /* Green or Amber */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_GREENAMBER UINT32_C(0x3) + #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_LAST \ + HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_GREENAMBER + uint8_t unused_2; + /* + * If the LED #2 state is "blink" or "blinkalt", then + * this field represents the requested time in milliseconds + * to keep LED on between cycles. + */ + uint16_t led2_blink_on; + /* + * If the LED #2 state is "blink" or "blinkalt", then + * this field represents the requested time in milliseconds + * to keep LED off between cycles. + */ + uint16_t led2_blink_off; + /* + * An identifier for the group of LEDs that LED #2 belongs + * to. + * If set to 0, then the LED #2 is not grouped. + * For all other non-zero values of this field, LED #2 is + * grouped together with the LEDs with the same group ID + * value. + */ + uint8_t led2_group_id; + /* An identifier for the LED #3. */ + uint8_t led3_id; + /* The type of LED #3. */ + uint8_t led3_type; + /* Speed LED */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_SPEED UINT32_C(0x0) + /* Activity LED */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_ACTIVITY UINT32_C(0x1) + /* Invalid */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_INVALID UINT32_C(0xff) + #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_LAST \ + HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_INVALID + /* The current state of the LED #3. */ + uint8_t led3_state; + /* Default state of the LED */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_DEFAULT UINT32_C(0x0) + /* Off */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_OFF UINT32_C(0x1) + /* On */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_ON UINT32_C(0x2) + /* Blink */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_BLINK UINT32_C(0x3) + /* Blink Alternately */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_BLINKALT UINT32_C(0x4) + #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_LAST \ + HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_BLINKALT + /* The color of LED #3. */ + uint8_t led3_color; + /* Default */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_DEFAULT UINT32_C(0x0) + /* Amber */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_AMBER UINT32_C(0x1) + /* Green */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_GREEN UINT32_C(0x2) + /* Green or Amber */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_GREENAMBER UINT32_C(0x3) + #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_LAST \ + HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_GREENAMBER + uint8_t unused_3; + /* + * If the LED #3 state is "blink" or "blinkalt", then + * this field represents the requested time in milliseconds + * to keep LED on between cycles. + */ + uint16_t led3_blink_on; + /* + * If the LED #3 state is "blink" or "blinkalt", then + * this field represents the requested time in milliseconds + * to keep LED off between cycles. + */ + uint16_t led3_blink_off; + /* + * An identifier for the group of LEDs that LED #3 belongs + * to. + * If set to 0, then the LED #3 is not grouped. + * For all other non-zero values of this field, LED #3 is + * grouped together with the LEDs with the same group ID + * value. + */ + uint8_t led3_group_id; + uint8_t unused_4[6]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/*********************** + * hwrm_port_led_qcaps * + ***********************/ + + +/* hwrm_port_led_qcaps_input (size:192b/24B) */ +struct hwrm_port_led_qcaps_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* Port ID of port whose LED configuration is being queried. */ + uint16_t port_id; + uint8_t unused_0[6]; +} __rte_packed; + +/* hwrm_port_led_qcaps_output (size:384b/48B) */ +struct hwrm_port_led_qcaps_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* + * The number of LEDs that are configured on this port. + * Up to 4 LEDs can be returned in the response. + */ + uint8_t num_leds; + /* Reserved for future use. */ + uint8_t unused[3]; + /* An identifier for the LED #0. */ + uint8_t led0_id; + /* The type of LED #0. */ + uint8_t led0_type; + /* Speed LED */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_SPEED UINT32_C(0x0) + /* Activity LED */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_ACTIVITY UINT32_C(0x1) + /* Invalid */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_INVALID UINT32_C(0xff) + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_LAST \ + HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_INVALID + /* + * An identifier for the group of LEDs that LED #0 belongs + * to. + * If set to 0, then the LED #0 cannot be grouped. + * For all other non-zero values of this field, LED #0 is + * grouped together with the LEDs with the same group ID + * value. + */ + uint8_t led0_group_id; + uint8_t unused_0; + /* The states supported by LED #0. */ + uint16_t led0_state_caps; + /* + * If set to 1, this LED is enabled. + * If set to 0, this LED is disabled. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_ENABLED \ UINT32_C(0x1) - /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_LVL_2 \ + /* + * If set to 1, off state is supported on this LED. + * If set to 0, off state is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_OFF_SUPPORTED \ UINT32_C(0x2) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_LAST \ - HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_LVL_2 - /* TQM ring 1 page size. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_MASK \ - UINT32_C(0xf0) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_SFT 4 - /* 4KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_4K \ - (UINT32_C(0x0) << 4) - /* 8KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_8K \ - (UINT32_C(0x1) << 4) - /* 64KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_64K \ - (UINT32_C(0x2) << 4) - /* 2MB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_2M \ - (UINT32_C(0x3) << 4) - /* 8MB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_8M \ - (UINT32_C(0x4) << 4) - /* 1GB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_1G \ - (UINT32_C(0x5) << 4) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_LAST \ - HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_1G - /* TQM ring 2 page size and level. */ - uint8_t tqm_ring2_pg_size_tqm_ring2_lvl; - /* TQM ring 2 PBL indirect levels. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_MASK \ - UINT32_C(0xf) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_SFT 0 - /* PBL pointer is physical start address. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_LVL_0 \ - UINT32_C(0x0) - /* PBL pointer points to PTE table. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_LVL_1 \ + /* + * If set to 1, on state is supported on this LED. + * If set to 0, on state is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_ON_SUPPORTED \ + UINT32_C(0x4) + /* + * If set to 1, blink state is supported on this LED. + * If set to 0, blink state is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_BLINK_SUPPORTED \ + UINT32_C(0x8) + /* + * If set to 1, blink_alt state is supported on this LED. + * If set to 0, blink_alt state is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_BLINK_ALT_SUPPORTED \ + UINT32_C(0x10) + /* The colors supported by LED #0. */ + uint16_t led0_color_caps; + /* reserved. */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_RSVD \ UINT32_C(0x1) - /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_LVL_2 \ + /* + * If set to 1, Amber color is supported on this LED. + * If set to 0, Amber color is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_AMBER_SUPPORTED \ UINT32_C(0x2) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_LAST \ - HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_LVL_2 - /* TQM ring 2 page size. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_MASK \ - UINT32_C(0xf0) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_SFT 4 - /* 4KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_4K \ - (UINT32_C(0x0) << 4) - /* 8KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_8K \ - (UINT32_C(0x1) << 4) - /* 64KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_64K \ - (UINT32_C(0x2) << 4) - /* 2MB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_2M \ - (UINT32_C(0x3) << 4) - /* 8MB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_8M \ - (UINT32_C(0x4) << 4) - /* 1GB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_1G \ - (UINT32_C(0x5) << 4) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_LAST \ - HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_1G - /* TQM ring 3 page size and level. */ - uint8_t tqm_ring3_pg_size_tqm_ring3_lvl; - /* TQM ring 3 PBL indirect levels. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_MASK \ - UINT32_C(0xf) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_SFT 0 - /* PBL pointer is physical start address. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_LVL_0 \ - UINT32_C(0x0) - /* PBL pointer points to PTE table. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_LVL_1 \ + /* + * If set to 1, Green color is supported on this LED. + * If set to 0, Green color is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_GREEN_SUPPORTED \ + UINT32_C(0x4) + /* An identifier for the LED #1. */ + uint8_t led1_id; + /* The type of LED #1. */ + uint8_t led1_type; + /* Speed LED */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_SPEED UINT32_C(0x0) + /* Activity LED */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_ACTIVITY UINT32_C(0x1) + /* Invalid */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_INVALID UINT32_C(0xff) + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_LAST \ + HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_INVALID + /* + * An identifier for the group of LEDs that LED #1 belongs + * to. + * If set to 0, then the LED #0 cannot be grouped. + * For all other non-zero values of this field, LED #0 is + * grouped together with the LEDs with the same group ID + * value. + */ + uint8_t led1_group_id; + uint8_t unused_1; + /* The states supported by LED #1. */ + uint16_t led1_state_caps; + /* + * If set to 1, this LED is enabled. + * If set to 0, this LED is disabled. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_ENABLED \ UINT32_C(0x1) - /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_LVL_2 \ + /* + * If set to 1, off state is supported on this LED. + * If set to 0, off state is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_OFF_SUPPORTED \ UINT32_C(0x2) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_LAST \ - HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_LVL_2 - /* TQM ring 3 page size. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_MASK \ - UINT32_C(0xf0) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_SFT 4 - /* 4KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_4K \ - (UINT32_C(0x0) << 4) - /* 8KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_8K \ - (UINT32_C(0x1) << 4) - /* 64KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_64K \ - (UINT32_C(0x2) << 4) - /* 2MB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_2M \ - (UINT32_C(0x3) << 4) - /* 8MB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_8M \ - (UINT32_C(0x4) << 4) - /* 1GB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_1G \ - (UINT32_C(0x5) << 4) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_LAST \ - HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_1G - /* TQM ring 4 page size and level. */ - uint8_t tqm_ring4_pg_size_tqm_ring4_lvl; - /* TQM ring 4 PBL indirect levels. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_MASK \ - UINT32_C(0xf) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_SFT 0 - /* PBL pointer is physical start address. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_LVL_0 \ - UINT32_C(0x0) - /* PBL pointer points to PTE table. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_LVL_1 \ + /* + * If set to 1, on state is supported on this LED. + * If set to 0, on state is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_ON_SUPPORTED \ + UINT32_C(0x4) + /* + * If set to 1, blink state is supported on this LED. + * If set to 0, blink state is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_BLINK_SUPPORTED \ + UINT32_C(0x8) + /* + * If set to 1, blink_alt state is supported on this LED. + * If set to 0, blink_alt state is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_BLINK_ALT_SUPPORTED \ + UINT32_C(0x10) + /* The colors supported by LED #1. */ + uint16_t led1_color_caps; + /* reserved. */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_RSVD \ UINT32_C(0x1) - /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_LVL_2 \ + /* + * If set to 1, Amber color is supported on this LED. + * If set to 0, Amber color is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_AMBER_SUPPORTED \ UINT32_C(0x2) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_LAST \ - HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_LVL_2 - /* TQM ring 4 page size. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_MASK \ - UINT32_C(0xf0) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_SFT 4 - /* 4KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_4K \ - (UINT32_C(0x0) << 4) - /* 8KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_8K \ - (UINT32_C(0x1) << 4) - /* 64KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_64K \ - (UINT32_C(0x2) << 4) - /* 2MB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_2M \ - (UINT32_C(0x3) << 4) - /* 8MB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_8M \ - (UINT32_C(0x4) << 4) - /* 1GB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_1G \ - (UINT32_C(0x5) << 4) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_LAST \ - HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_1G - /* TQM ring 5 page size and level. */ - uint8_t tqm_ring5_pg_size_tqm_ring5_lvl; - /* TQM ring 5 PBL indirect levels. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_MASK \ - UINT32_C(0xf) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_SFT 0 - /* PBL pointer is physical start address. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_LVL_0 \ - UINT32_C(0x0) - /* PBL pointer points to PTE table. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_LVL_1 \ + /* + * If set to 1, Green color is supported on this LED. + * If set to 0, Green color is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_GREEN_SUPPORTED \ + UINT32_C(0x4) + /* An identifier for the LED #2. */ + uint8_t led2_id; + /* The type of LED #2. */ + uint8_t led2_type; + /* Speed LED */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_SPEED UINT32_C(0x0) + /* Activity LED */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_ACTIVITY UINT32_C(0x1) + /* Invalid */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_INVALID UINT32_C(0xff) + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_LAST \ + HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_INVALID + /* + * An identifier for the group of LEDs that LED #0 belongs + * to. + * If set to 0, then the LED #0 cannot be grouped. + * For all other non-zero values of this field, LED #0 is + * grouped together with the LEDs with the same group ID + * value. + */ + uint8_t led2_group_id; + uint8_t unused_2; + /* The states supported by LED #2. */ + uint16_t led2_state_caps; + /* + * If set to 1, this LED is enabled. + * If set to 0, this LED is disabled. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_ENABLED \ UINT32_C(0x1) - /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_LVL_2 \ + /* + * If set to 1, off state is supported on this LED. + * If set to 0, off state is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_OFF_SUPPORTED \ UINT32_C(0x2) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_LAST \ - HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_LVL_2 - /* TQM ring 5 page size. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_MASK \ - UINT32_C(0xf0) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_SFT 4 - /* 4KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_4K \ - (UINT32_C(0x0) << 4) - /* 8KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_8K \ - (UINT32_C(0x1) << 4) - /* 64KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_64K \ - (UINT32_C(0x2) << 4) - /* 2MB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_2M \ - (UINT32_C(0x3) << 4) - /* 8MB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_8M \ - (UINT32_C(0x4) << 4) - /* 1GB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_1G \ - (UINT32_C(0x5) << 4) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_LAST \ - HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_1G - /* TQM ring 6 page size and level. */ - uint8_t tqm_ring6_pg_size_tqm_ring6_lvl; - /* TQM ring 6 PBL indirect levels. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_MASK \ - UINT32_C(0xf) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_SFT 0 - /* PBL pointer is physical start address. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_LVL_0 \ - UINT32_C(0x0) - /* PBL pointer points to PTE table. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_LVL_1 \ + /* + * If set to 1, on state is supported on this LED. + * If set to 0, on state is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_ON_SUPPORTED \ + UINT32_C(0x4) + /* + * If set to 1, blink state is supported on this LED. + * If set to 0, blink state is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_BLINK_SUPPORTED \ + UINT32_C(0x8) + /* + * If set to 1, blink_alt state is supported on this LED. + * If set to 0, blink_alt state is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_BLINK_ALT_SUPPORTED \ + UINT32_C(0x10) + /* The colors supported by LED #2. */ + uint16_t led2_color_caps; + /* reserved. */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_RSVD \ UINT32_C(0x1) - /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_LVL_2 \ + /* + * If set to 1, Amber color is supported on this LED. + * If set to 0, Amber color is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_AMBER_SUPPORTED \ UINT32_C(0x2) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_LAST \ - HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_LVL_2 - /* TQM ring 6 page size. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_MASK \ - UINT32_C(0xf0) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_SFT 4 - /* 4KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_4K \ - (UINT32_C(0x0) << 4) - /* 8KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_8K \ - (UINT32_C(0x1) << 4) - /* 64KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_64K \ - (UINT32_C(0x2) << 4) - /* 2MB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_2M \ - (UINT32_C(0x3) << 4) - /* 8MB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_8M \ - (UINT32_C(0x4) << 4) - /* 1GB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_1G \ - (UINT32_C(0x5) << 4) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_LAST \ - HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_1G - /* TQM ring 7 page size and level. */ - uint8_t tqm_ring7_pg_size_tqm_ring7_lvl; - /* TQM ring 7 PBL indirect levels. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_MASK \ - UINT32_C(0xf) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_SFT 0 - /* PBL pointer is physical start address. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_LVL_0 \ - UINT32_C(0x0) - /* PBL pointer points to PTE table. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_LVL_1 \ + /* + * If set to 1, Green color is supported on this LED. + * If set to 0, Green color is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_GREEN_SUPPORTED \ + UINT32_C(0x4) + /* An identifier for the LED #3. */ + uint8_t led3_id; + /* The type of LED #3. */ + uint8_t led3_type; + /* Speed LED */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_SPEED UINT32_C(0x0) + /* Activity LED */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_ACTIVITY UINT32_C(0x1) + /* Invalid */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_INVALID UINT32_C(0xff) + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_LAST \ + HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_INVALID + /* + * An identifier for the group of LEDs that LED #3 belongs + * to. + * If set to 0, then the LED #0 cannot be grouped. + * For all other non-zero values of this field, LED #0 is + * grouped together with the LEDs with the same group ID + * value. + */ + uint8_t led3_group_id; + uint8_t unused_3; + /* The states supported by LED #3. */ + uint16_t led3_state_caps; + /* + * If set to 1, this LED is enabled. + * If set to 0, this LED is disabled. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_ENABLED \ UINT32_C(0x1) - /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_LVL_2 \ + /* + * If set to 1, off state is supported on this LED. + * If set to 0, off state is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_OFF_SUPPORTED \ UINT32_C(0x2) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_LAST \ - HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_LVL_2 - /* TQM ring 7 page size. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_MASK \ - UINT32_C(0xf0) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_SFT 4 - /* 4KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_4K \ - (UINT32_C(0x0) << 4) - /* 8KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_8K \ - (UINT32_C(0x1) << 4) - /* 64KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_64K \ - (UINT32_C(0x2) << 4) - /* 2MB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_2M \ - (UINT32_C(0x3) << 4) - /* 8MB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_8M \ - (UINT32_C(0x4) << 4) - /* 1GB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_1G \ - (UINT32_C(0x5) << 4) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_LAST \ - HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_1G - /* MR/AV page size and level. */ - uint8_t mrav_pg_size_mrav_lvl; - /* MR/AV PBL indirect levels. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_MASK \ - UINT32_C(0xf) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_SFT 0 - /* PBL pointer is physical start address. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_LVL_0 \ - UINT32_C(0x0) - /* PBL pointer points to PTE table. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_LVL_1 \ + /* + * If set to 1, on state is supported on this LED. + * If set to 0, on state is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_ON_SUPPORTED \ + UINT32_C(0x4) + /* + * If set to 1, blink state is supported on this LED. + * If set to 0, blink state is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_BLINK_SUPPORTED \ + UINT32_C(0x8) + /* + * If set to 1, blink_alt state is supported on this LED. + * If set to 0, blink_alt state is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_BLINK_ALT_SUPPORTED \ + UINT32_C(0x10) + /* The colors supported by LED #3. */ + uint16_t led3_color_caps; + /* reserved. */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_RSVD \ + UINT32_C(0x1) + /* + * If set to 1, Amber color is supported on this LED. + * If set to 0, Amber color is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_AMBER_SUPPORTED \ + UINT32_C(0x2) + /* + * If set to 1, Green color is supported on this LED. + * If set to 0, Green color is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_GREEN_SUPPORTED \ + UINT32_C(0x4) + uint8_t unused_4[3]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/*********************** + * hwrm_port_prbs_test * + ***********************/ + + +/* hwrm_port_prbs_test_input (size:384b/48B) */ +struct hwrm_port_prbs_test_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* Host address data is to DMA'd to. */ + uint64_t resp_data_addr; + /* + * Size of the buffer pointed to by resp_data_addr. The firmware may + * use this entire buffer or less than the entire buffer, but never more. + */ + uint16_t data_len; + uint16_t unused_0; + uint32_t unused_1; + /* Port ID of port where PRBS test to be run. */ + uint16_t port_id; + /* Polynomial selection for PRBS test. */ + uint16_t poly; + /* PRBS7 */ + #define HWRM_PORT_PRBS_TEST_INPUT_POLY_PRBS7 UINT32_C(0x0) + /* PRBS9 */ + #define HWRM_PORT_PRBS_TEST_INPUT_POLY_PRBS9 UINT32_C(0x1) + /* PRBS11 */ + #define HWRM_PORT_PRBS_TEST_INPUT_POLY_PRBS11 UINT32_C(0x2) + /* PRBS15 */ + #define HWRM_PORT_PRBS_TEST_INPUT_POLY_PRBS15 UINT32_C(0x3) + /* PRBS23 */ + #define HWRM_PORT_PRBS_TEST_INPUT_POLY_PRBS23 UINT32_C(0x4) + /* PRBS31 */ + #define HWRM_PORT_PRBS_TEST_INPUT_POLY_PRBS31 UINT32_C(0x5) + /* PRBS58 */ + #define HWRM_PORT_PRBS_TEST_INPUT_POLY_PRBS58 UINT32_C(0x6) + /* Invalid */ + #define HWRM_PORT_PRBS_TEST_INPUT_POLY_INVALID UINT32_C(0xff) + #define HWRM_PORT_PRBS_TEST_INPUT_POLY_LAST \ + HWRM_PORT_PRBS_TEST_INPUT_POLY_INVALID + /* + * Configuration bits for PRBS test. + * Use enable bit to start/stop test. + * Use tx/rx lane map bits to run test on specific lanes, + * if set to 0 test will be run on all lanes. + */ + uint16_t prbs_config; + /* + * Set 0 to stop test currently in progress + * Set 1 to start test with configuration provided. + */ + #define HWRM_PORT_PRBS_TEST_INPUT_PRBS_CONFIG_START_STOP \ UINT32_C(0x1) - /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_LVL_2 \ + /* + * If set to 1, tx_lane_map bitmap should have lane bits set. + * If set to 0, test will be run on all lanes for this port. + */ + #define HWRM_PORT_PRBS_TEST_INPUT_PRBS_CONFIG_TX_LANE_MAP_VALID \ UINT32_C(0x2) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_LAST \ - HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_LVL_2 - /* MR/AV page size. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_MASK \ - UINT32_C(0xf0) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_SFT 4 - /* 4KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_4K \ - (UINT32_C(0x0) << 4) - /* 8KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_8K \ - (UINT32_C(0x1) << 4) - /* 64KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_64K \ - (UINT32_C(0x2) << 4) - /* 2MB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_2M \ - (UINT32_C(0x3) << 4) - /* 8MB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_8M \ - (UINT32_C(0x4) << 4) - /* 1GB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_1G \ - (UINT32_C(0x5) << 4) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_LAST \ - HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_1G - /* Timer page size and level. */ - uint8_t tim_pg_size_tim_lvl; - /* Timer PBL indirect levels. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_MASK \ - UINT32_C(0xf) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_SFT 0 - /* PBL pointer is physical start address. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_LVL_0 \ + /* + * If set to 1, rx_lane_map bitmap should have lane bits set. + * If set to 0, test will be run on all lanes for this port. + */ + #define HWRM_PORT_PRBS_TEST_INPUT_PRBS_CONFIG_RX_LANE_MAP_VALID \ + UINT32_C(0x4) + /* Duration in seconds to run the PRBS test. */ + uint16_t timeout; + /* + * If tx_lane_map_valid is set to 1, this field is a bitmap + * of tx lanes to run PRBS test. bit0 = lane0, + * bit1 = lane1 ..bit31 = lane31 + */ + uint32_t tx_lane_map; + /* + * If rx_lane_map_valid is set to 1, this field is a bitmap + * of rx lanes to run PRBS test. bit0 = lane0, + * bit1 = lane1 ..bit31 = lane31 + */ + uint32_t rx_lane_map; +} __rte_packed; + +/* hwrm_port_prbs_test_output (size:128b/16B) */ +struct hwrm_port_prbs_test_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* Total length of stored data. */ + uint16_t total_data_len; + uint16_t unused_0; + uint8_t unused_1[3]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/********************** + * hwrm_port_dsc_dump * + **********************/ + + +/* hwrm_port_dsc_dump_input (size:320b/40B) */ +struct hwrm_port_dsc_dump_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* Host address where response diagnostic data is returned. */ + uint64_t resp_data_addr; + /* + * Size of the buffer pointed to by resp_data_addr. The firmware + * may use this entire buffer or less than the entire buffer, but + * never more. + */ + uint16_t data_len; + uint16_t unused_0; + uint32_t unused_1; + /* Port ID of port where dsc dump to be collected. */ + uint16_t port_id; + /* Diag level specified by the user */ + uint16_t diag_level; + /* SRDS_DIAG_LANE */ + #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_LANE \ UINT32_C(0x0) - /* PBL pointer points to PTE table. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_LVL_1 \ + /* SRDS_DIAG_CORE */ + #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_CORE \ UINT32_C(0x1) - /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_LVL_2 \ + /* SRDS_DIAG_EVENT */ + #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_EVENT \ UINT32_C(0x2) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_LAST \ - HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_LVL_2 - /* Timer page size. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_MASK \ - UINT32_C(0xf0) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_SFT 4 - /* 4KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_4K \ - (UINT32_C(0x0) << 4) - /* 8KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_8K \ - (UINT32_C(0x1) << 4) - /* 64KB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_64K \ - (UINT32_C(0x2) << 4) - /* 2MB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_2M \ - (UINT32_C(0x3) << 4) - /* 8MB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_8M \ - (UINT32_C(0x4) << 4) - /* 1GB. */ - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_1G \ - (UINT32_C(0x5) << 4) - #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_LAST \ - HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_1G - /* QP page directory. */ - uint64_t qpc_page_dir; - /* SRQ page directory. */ - uint64_t srq_page_dir; - /* CQ page directory. */ - uint64_t cq_page_dir; - /* VNIC page directory. */ - uint64_t vnic_page_dir; - /* Stat page directory. */ - uint64_t stat_page_dir; - /* TQM slowpath page directory. */ - uint64_t tqm_sp_page_dir; - /* TQM ring 0 page directory. */ - uint64_t tqm_ring0_page_dir; - /* TQM ring 1 page directory. */ - uint64_t tqm_ring1_page_dir; - /* TQM ring 2 page directory. */ - uint64_t tqm_ring2_page_dir; - /* TQM ring 3 page directory. */ - uint64_t tqm_ring3_page_dir; - /* TQM ring 4 page directory. */ - uint64_t tqm_ring4_page_dir; - /* TQM ring 5 page directory. */ - uint64_t tqm_ring5_page_dir; - /* TQM ring 6 page directory. */ - uint64_t tqm_ring6_page_dir; - /* TQM ring 7 page directory. */ - uint64_t tqm_ring7_page_dir; - /* MR/AV page directory. */ - uint64_t mrav_page_dir; - /* Timer page directory. */ - uint64_t tim_page_dir; - /* Number of entries to reserve for QP1 */ - uint16_t qp_num_qp1_entries; - /* Number of entries to reserve for L2 */ - uint16_t qp_num_l2_entries; - /* Number of QPs. */ - uint32_t qp_num_entries; - /* Number of SRQs. */ - uint32_t srq_num_entries; - /* Number of entries to reserve for L2 */ - uint16_t srq_num_l2_entries; - /* Number of entries to reserve for L2 */ - uint16_t cq_num_l2_entries; - /* Number of CQs. */ - uint32_t cq_num_entries; - /* Number of entries to reserve for VNIC entries */ - uint16_t vnic_num_vnic_entries; - /* Number of entries to reserve for Ring table entries */ - uint16_t vnic_num_ring_table_entries; - /* Number of Stats. */ - uint32_t stat_num_entries; - /* Number of TQM slowpath entries. */ - uint32_t tqm_sp_num_entries; - /* Number of TQM ring 0 entries. */ - uint32_t tqm_ring0_num_entries; - /* Number of TQM ring 1 entries. */ - uint32_t tqm_ring1_num_entries; - /* Number of TQM ring 2 entries. */ - uint32_t tqm_ring2_num_entries; - /* Number of TQM ring 3 entries. */ - uint32_t tqm_ring3_num_entries; - /* Number of TQM ring 4 entries. */ - uint32_t tqm_ring4_num_entries; - /* Number of TQM ring 5 entries. */ - uint32_t tqm_ring5_num_entries; - /* Number of TQM ring 6 entries. */ - uint32_t tqm_ring6_num_entries; - /* Number of TQM ring 7 entries. */ - uint32_t tqm_ring7_num_entries; - /* Number of MR/AV entries. */ - uint32_t mrav_num_entries; - /* Number of Timer entries. */ - uint32_t tim_num_entries; - uint8_t unused_1[7]; + /* SRDS_DIAG_EYE */ + #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_EYE \ + UINT32_C(0x3) + /* SRDS_DIAG_REG_CORE */ + #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_REG_CORE \ + UINT32_C(0x4) + /* SRDS_DIAG_REG_LANE */ + #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_REG_LANE \ + UINT32_C(0x5) + /* SRDS_DIAG_UC_CORE */ + #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_UC_CORE \ + UINT32_C(0x6) + /* SRDS_DIAG_UC_LANE */ + #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_UC_LANE \ + UINT32_C(0x7) + /* SRDS_DIAG_LANE_DEBUG */ + #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_LANE_DEBUG \ + UINT32_C(0x8) + /* SRDS_DIAG_BER_VERT */ + #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_BER_VERT \ + UINT32_C(0x9) + /* SRDS_DIAG_BER_HORZ */ + #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_BER_HORZ \ + UINT32_C(0xa) + /* SRDS_DIAG_EVENT_SAFE */ + #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_EVENT_SAFE \ + UINT32_C(0xb) + /* SRDS_DIAG_TIMESTAMP */ + #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_TIMESTAMP \ + UINT32_C(0xc) + #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_LAST \ + HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_TIMESTAMP + /* + * This field is a lane number + * on which to collect the dsc dump + */ + uint16_t lane_number; + /* + * Configuration bits. + * Use enable bit to start dsc dump or retrieve dump + */ + uint16_t dsc_dump_config; + /* + * Set 0 to retrieve the dsc dump + * Set 1 to start the dsc dump + */ + #define HWRM_PORT_DSC_DUMP_INPUT_DSC_DUMP_CONFIG_START_RETRIEVE \ + UINT32_C(0x1) +} __rte_packed; + +/* hwrm_port_dsc_dump_output (size:128b/16B) */ +struct hwrm_port_dsc_dump_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* Total length of stored data. */ + uint16_t total_data_len; + uint16_t unused_0; + uint8_t unused_1[3]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -9864,15 +20767,15 @@ struct hwrm_func_backing_store_qcfg_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/*********************** - * hwrm_func_vlan_qcfg * - ***********************/ +/****************************** + * hwrm_port_sfp_sideband_cfg * + ******************************/ -/* hwrm_func_vlan_qcfg_input (size:192b/24B) */ -struct hwrm_func_vlan_qcfg_input { +/* hwrm_port_sfp_sideband_cfg_input (size:256b/32B) */ +struct hwrm_port_sfp_sideband_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -9889,7 +20792,8 @@ struct hwrm_func_vlan_qcfg_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -9900,18 +20804,154 @@ struct hwrm_func_vlan_qcfg_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; + /* Port ID of port that is to be queried. */ + uint16_t port_id; + uint8_t unused_0[6]; /* - * Function ID of the function that is being - * configured. - * If set to 0xFF... (All Fs), then the configuration is - * for the requesting function. + * This bitfield is used to specify which bits from the 'flags' + * fields are being configured by the caller. */ - uint16_t fid; + uint32_t enables; + /* This bit must be '1' for rs0 to be configured. */ + #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_RS0 \ + UINT32_C(0x1) + /* This bit must be '1' for rs1 to be configured. */ + #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_RS1 \ + UINT32_C(0x2) + /* This bit must be '1' for tx_disable to be configured. */ + #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_TX_DIS \ + UINT32_C(0x4) + /* + * This bit must be '1' for mod_sel to be configured. + * Valid only on QSFP modules + */ + #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_MOD_SEL \ + UINT32_C(0x8) + /* This bit must be '1' for reset_l to be configured. */ + #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_RESET_L \ + UINT32_C(0x10) + /* This bit must be '1' for lp_mode to be configured. */ + #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_LP_MODE \ + UINT32_C(0x20) + /* This bit must be '1' for pwr_disable to be configured. */ + #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_PWR_DIS \ + UINT32_C(0x40) + /* + * Only bits that have corresponding bits in the 'enables' + * bitfield are processed by the firmware, all other bits + * of 'flags' are ignored. + */ + uint32_t flags; + /* + * This bit along with rs1 configures the current speed of the dual + * rate module. If these pins are GNDed then the speed can be changed + * by driectly writing to EEPROM. + */ + #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_RS0 \ + UINT32_C(0x1) + /* + * This bit along with rs0 configures the current speed of the dual + * rate module. If these pins are GNDed then the speed can be changed + * by driectly writing to EEPROM. + */ + #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_RS1 \ + UINT32_C(0x2) + /* + * When this bit is set to '1', tx_disable is set. + * On a 1G BASE-T module, if this bit is set, + * module PHY registers will not be accessible. + */ + #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_TX_DIS \ + UINT32_C(0x4) + /* + * When this bit is set to '1', this module is selected. + * Valid only on QSFP modules + */ + #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_MOD_SEL \ + UINT32_C(0x8) + /* + * If reset_l is set to 0, Module will be taken out of reset + * and other signals will be set to their requested state once + * the module is out of reset. + * Valid only on QSFP modules + */ + #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_RESET_L \ + UINT32_C(0x10) + /* + * When this bit is set to '1', the module will be configured + * in low power mode. + * Valid only on QSFP modules + */ + #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_LP_MODE \ + UINT32_C(0x20) + /* When this bit is set to '1', the module will be powered down. */ + #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_PWR_DIS \ + UINT32_C(0x40) +} __rte_packed; + +/* hwrm_port_sfp_sideband_cfg_output (size:128b/16B) */ +struct hwrm_port_sfp_sideband_cfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. When + * writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/******************************* + * hwrm_port_sfp_sideband_qcfg * + *******************************/ + + +/* hwrm_port_sfp_sideband_qcfg_input (size:192b/24B) */ +struct hwrm_port_sfp_sideband_qcfg_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* Port ID of port that is to be queried. */ + uint16_t port_id; uint8_t unused_0[6]; -} __attribute__((packed)); +} __rte_packed; -/* hwrm_func_vlan_qcfg_output (size:320b/40B) */ -struct hwrm_func_vlan_qcfg_output { +/* hwrm_port_sfp_sideband_qcfg_output (size:192b/24B) */ +struct hwrm_port_sfp_sideband_qcfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -9920,32 +20960,220 @@ struct hwrm_func_vlan_qcfg_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - uint64_t unused_0; - /* S-TAG VLAN identifier configured for the function. */ - uint16_t stag_vid; - /* S-TAG PCP value configured for the function. */ - uint8_t stag_pcp; - uint8_t unused_1; /* - * S-TAG TPID value configured for the function. This field is specified in - * network byte order. + * Bitmask indicating which sideband signals are valid. + * This is based on the board and nvm cfg that is present on the board. */ - uint16_t stag_tpid; - /* C-TAG VLAN identifier configured for the function. */ - uint16_t ctag_vid; - /* C-TAG PCP value configured for the function. */ - uint8_t ctag_pcp; - uint8_t unused_2; + uint32_t supported_mask; + uint32_t sideband_signals; + /* When this bit is set to '1', the Module is absent. */ + #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_MOD_ABS \ + UINT32_C(0x1) + /* + * When this bit is set to '1', there is no valid signal on RX. + * This signal is a filtered version of Signal Detect. + */ + #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_RX_LOS \ + UINT32_C(0x2) + /* + * This bit along with rs1 indiactes the current speed of the dual + * rate module.If these pins are grounded then the speed can be + * changed by driectky writing to EEPROM. + */ + #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_RS0 \ + UINT32_C(0x4) + /* + * This bit along with rs0 indiactes the current speed of the dual + * rate module.If these pins are grounded then the speed can be + * changed by driectky writing to EEPROM. + */ + #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_RS1 \ + UINT32_C(0x8) + /* + * When this bit is set to '1', tx_disable is set. + * On a 1G BASE-T module, if this bit is set, module PHY + * registers will not be accessible. + */ + #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_TX_DIS \ + UINT32_C(0x10) + /* When this bit is set to '1', tx_fault is set. */ + #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_TX_FAULT \ + UINT32_C(0x20) + /* + * When this bit is set to '1', module is selected. + * Valid only on QSFP modules + */ + #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_MOD_SEL \ + UINT32_C(0x40) + /* + * When this bit is set to '0', the module is held in reset. + * if reset_l is set to 1,first module is taken out of reset + * and other signals will be set to their requested state. + * Valid only on QSFP modules. + */ + #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_RESET_L \ + UINT32_C(0x80) + /* + * When this bit is set to '1', the module is in low power mode. + * Valid only on QSFP modules + */ + #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_LP_MODE \ + UINT32_C(0x100) + /* When this bit is set to '1', module is in power down state. */ + #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_PWR_DIS \ + UINT32_C(0x200) + uint8_t unused[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. When + * writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/********************************** + * hwrm_port_phy_mdio_bus_acquire * + **********************************/ + + +/* hwrm_port_phy_mdio_bus_acquire_input (size:192b/24B) */ +struct hwrm_port_phy_mdio_bus_acquire_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* Port ID of the port. */ + uint16_t port_id; + /* + * client_id of the client requesting BUS access. + * Any value from 0x10 to 0xFFFF can be used. + * Client should make sure that the returned client_id + * in response matches the client_id in request. + * 0-0xF are reserved for internal use. + */ + uint16_t client_id; + /* + * Timeout in milli seconds, MDIO BUS will be released automatically + * after this time, if another mdio acquire command is not received + * within the timeout window from the same client. + * A 0xFFFF will hold the bus until this bus is released. + */ + uint16_t mdio_bus_timeout; + uint8_t unused_0[2]; +} __rte_packed; + +/* hwrm_port_phy_mdio_bus_acquire_output (size:128b/16B) */ +struct hwrm_port_phy_mdio_bus_acquire_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint16_t unused_0; + /* + * client_id of the module holding the BUS. + * 0-0xF are reserved for internal use. + */ + uint16_t client_id; + uint8_t unused_1[3]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/********************************** + * hwrm_port_phy_mdio_bus_release * + **********************************/ + + +/* hwrm_port_phy_mdio_bus_release_input (size:192b/24B) */ +struct hwrm_port_phy_mdio_bus_release_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* Port ID of the port. */ + uint16_t port_id; /* - * C-TAG TPID value configured for the function. This field is specified in - * network byte order. + * client_id of the client requesting BUS release. + * A client should not release any other clients BUS. */ - uint16_t ctag_tpid; - /* Future use. */ - uint32_t rsvd2; - /* Future use. */ - uint32_t rsvd3; - uint8_t unused_3[3]; + uint16_t client_id; + uint8_t unused_0[4]; +} __rte_packed; + +/* hwrm_port_phy_mdio_bus_release_output (size:128b/16B) */ +struct hwrm_port_phy_mdio_bus_release_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint16_t unused_0; + /* The BUS is released if client_id matches the client_id in request. */ + uint16_t clients_id; + uint8_t unused_1[3]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -9954,15 +21182,15 @@ struct hwrm_func_vlan_qcfg_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/********************** - * hwrm_func_vlan_cfg * - **********************/ +/*********************** + * hwrm_queue_qportcfg * + ***********************/ -/* hwrm_func_vlan_cfg_input (size:384b/48B) */ -struct hwrm_func_vlan_cfg_input { +/* hwrm_queue_qportcfg_input (size:192b/24B) */ +struct hwrm_queue_qportcfg_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -9979,7 +21207,8 @@ struct hwrm_func_vlan_cfg_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -9990,100 +21219,431 @@ struct hwrm_func_vlan_cfg_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; + uint32_t flags; /* - * Function ID of the function that is being - * configured. - * If set to 0xFF... (All Fs), then the configuration is - * for the requesting function. + * Enumeration denoting the RX, TX type of the resource. + * This enumeration is used for resources that are similar for both + * TX and RX paths of the chip. */ - uint16_t fid; - uint8_t unused_0[2]; - uint32_t enables; + #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH UINT32_C(0x1) + /* tx path */ + #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0) + /* rx path */ + #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1) + #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_LAST \ + HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX /* - * This bit must be '1' for the stag_vid field to be - * configured. + * Port ID of port for which the queue configuration is being + * queried. This field is only required when sent by IPC. */ - #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_STAG_VID UINT32_C(0x1) + uint16_t port_id; /* - * This bit must be '1' for the ctag_vid field to be - * configured. + * Drivers will set this capability when it can use + * queue_idx_service_profile to map the queues to application. */ - #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_CTAG_VID UINT32_C(0x2) + uint8_t drv_qmap_cap; + /* disabled */ + #define HWRM_QUEUE_QPORTCFG_INPUT_DRV_QMAP_CAP_DISABLED UINT32_C(0x0) + /* enabled */ + #define HWRM_QUEUE_QPORTCFG_INPUT_DRV_QMAP_CAP_ENABLED UINT32_C(0x1) + #define HWRM_QUEUE_QPORTCFG_INPUT_DRV_QMAP_CAP_LAST \ + HWRM_QUEUE_QPORTCFG_INPUT_DRV_QMAP_CAP_ENABLED + uint8_t unused_0; +} __rte_packed; + +/* hwrm_queue_qportcfg_output (size:256b/32B) */ +struct hwrm_queue_qportcfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; /* - * This bit must be '1' for the stag_pcp field to be - * configured. + * The maximum number of queues that can be configured on this + * port. + * Valid values range from 1 through 8. */ - #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_STAG_PCP UINT32_C(0x4) + uint8_t max_configurable_queues; + /* + * The maximum number of lossless queues that can be configured + * on this port. + * Valid values range from 0 through 8. + */ + uint8_t max_configurable_lossless_queues; + /* + * Bitmask indicating which queues can be configured by the + * hwrm_queue_cfg command. + * + * Each bit represents a specific queue where bit 0 represents + * queue 0 and bit 7 represents queue 7. + * # A value of 0 indicates that the queue is not configurable + * by the hwrm_queue_cfg command. + * # A value of 1 indicates that the queue is configurable. + * # A hwrm_queue_cfg command shall return error when trying to + * configure a queue not configurable. + */ + uint8_t queue_cfg_allowed; + /* Information about queue configuration. */ + uint8_t queue_cfg_info; + /* + * If this flag is set to '1', then the queues are + * configured asymmetrically on TX and RX sides. + * If this flag is set to '0', then the queues are + * configured symmetrically on TX and RX sides. For + * symmetric configuration, the queue configuration + * including queue ids and service profiles on the + * TX side is the same as the corresponding queue + * configuration on the RX side. + */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_CFG_INFO_ASYM_CFG \ + UINT32_C(0x1) + /* + * Bitmask indicating which queues can be configured by the + * hwrm_queue_pfcenable_cfg command. + * + * Each bit represents a specific priority where bit 0 represents + * priority 0 and bit 7 represents priority 7. + * # A value of 0 indicates that the priority is not configurable by + * the hwrm_queue_pfcenable_cfg command. + * # A value of 1 indicates that the priority is configurable. + * # A hwrm_queue_pfcenable_cfg command shall return error when + * trying to configure a priority that is not configurable. + */ + uint8_t queue_pfcenable_cfg_allowed; + /* + * Bitmask indicating which queues can be configured by the + * hwrm_queue_pri2cos_cfg command. + * + * Each bit represents a specific queue where bit 0 represents + * queue 0 and bit 7 represents queue 7. + * # A value of 0 indicates that the queue is not configurable + * by the hwrm_queue_pri2cos_cfg command. + * # A value of 1 indicates that the queue is configurable. + * # A hwrm_queue_pri2cos_cfg command shall return error when + * trying to configure a queue that is not configurable. + */ + uint8_t queue_pri2cos_cfg_allowed; + /* + * Bitmask indicating which queues can be configured by the + * hwrm_queue_pri2cos_cfg command. + * + * Each bit represents a specific queue where bit 0 represents + * queue 0 and bit 7 represents queue 7. + * # A value of 0 indicates that the queue is not configurable + * by the hwrm_queue_pri2cos_cfg command. + * # A value of 1 indicates that the queue is configurable. + * # A hwrm_queue_pri2cos_cfg command shall return error when + * trying to configure a queue not configurable. + */ + uint8_t queue_cos2bw_cfg_allowed; + /* + * ID of CoS Queue 0. + * FF - Invalid id + * + * # This ID can be used on any subsequent call to an hwrm command + * that takes a queue id. + * # IDs must always be queried by this command before any use + * by the driver or software. + * # Any driver or software should not make any assumptions about + * queue IDs. + * # A value of 0xff indicates that the queue is not available. + * # Available queues may not be in sequential order. + */ + uint8_t queue_id0; + /* This value is applicable to CoS queues only. */ + uint8_t queue_id0_service_profile; + /* Lossy (best-effort) */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSY \ + UINT32_C(0x0) + /* Lossless (legacy) */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSLESS \ + UINT32_C(0x1) + /* Lossless RoCE */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSLESS_ROCE \ + UINT32_C(0x1) + /* Lossy RoCE CNP */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSY_ROCE_CNP \ + UINT32_C(0x2) + /* Lossless NIC */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSLESS_NIC \ + UINT32_C(0x3) + /* Set to 0xFF... (All Fs) if there is no service profile specified */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_UNKNOWN \ + UINT32_C(0xff) + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LAST \ + HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_UNKNOWN + /* + * ID of CoS Queue 1. + * FF - Invalid id + * + * # This ID can be used on any subsequent call to an hwrm command + * that takes a queue id. + * # IDs must always be queried by this command before any use + * by the driver or software. + * # Any driver or software should not make any assumptions about + * queue IDs. + * # A value of 0xff indicates that the queue is not available. + * # Available queues may not be in sequential order. + */ + uint8_t queue_id1; + /* This value is applicable to CoS queues only. */ + uint8_t queue_id1_service_profile; + /* Lossy (best-effort) */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSY \ + UINT32_C(0x0) + /* Lossless (legacy) */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSLESS \ + UINT32_C(0x1) + /* Lossless RoCE */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSLESS_ROCE \ + UINT32_C(0x1) + /* Lossy RoCE CNP */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSY_ROCE_CNP \ + UINT32_C(0x2) + /* Lossless NIC */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSLESS_NIC \ + UINT32_C(0x3) + /* Set to 0xFF... (All Fs) if there is no service profile specified */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_UNKNOWN \ + UINT32_C(0xff) + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LAST \ + HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_UNKNOWN + /* + * ID of CoS Queue 2. + * FF - Invalid id + * + * # This ID can be used on any subsequent call to an hwrm command + * that takes a queue id. + * # IDs must always be queried by this command before any use + * by the driver or software. + * # Any driver or software should not make any assumptions about + * queue IDs. + * # A value of 0xff indicates that the queue is not available. + * # Available queues may not be in sequential order. + */ + uint8_t queue_id2; + /* This value is applicable to CoS queues only. */ + uint8_t queue_id2_service_profile; + /* Lossy (best-effort) */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSY \ + UINT32_C(0x0) + /* Lossless (legacy) */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSLESS \ + UINT32_C(0x1) + /* Lossless RoCE */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSLESS_ROCE \ + UINT32_C(0x1) + /* Lossy RoCE CNP */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSY_ROCE_CNP \ + UINT32_C(0x2) + /* Lossless NIC */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSLESS_NIC \ + UINT32_C(0x3) + /* Set to 0xFF... (All Fs) if there is no service profile specified */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_UNKNOWN \ + UINT32_C(0xff) + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LAST \ + HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_UNKNOWN /* - * This bit must be '1' for the ctag_pcp field to be - * configured. + * ID of CoS Queue 3. + * FF - Invalid id + * + * # This ID can be used on any subsequent call to an hwrm command + * that takes a queue id. + * # IDs must always be queried by this command before any use + * by the driver or software. + * # Any driver or software should not make any assumptions about + * queue IDs. + * # A value of 0xff indicates that the queue is not available. + * # Available queues may not be in sequential order. */ - #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_CTAG_PCP UINT32_C(0x8) + uint8_t queue_id3; + /* This value is applicable to CoS queues only. */ + uint8_t queue_id3_service_profile; + /* Lossy (best-effort) */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSY \ + UINT32_C(0x0) + /* Lossless (legacy) */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSLESS \ + UINT32_C(0x1) + /* Lossless RoCE */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSLESS_ROCE \ + UINT32_C(0x1) + /* Lossy RoCE CNP */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSY_ROCE_CNP \ + UINT32_C(0x2) + /* Lossless NIC */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSLESS_NIC \ + UINT32_C(0x3) + /* Set to 0xFF... (All Fs) if there is no service profile specified */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_UNKNOWN \ + UINT32_C(0xff) + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LAST \ + HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_UNKNOWN /* - * This bit must be '1' for the stag_tpid field to be - * configured. + * ID of CoS Queue 4. + * FF - Invalid id + * + * # This ID can be used on any subsequent call to an hwrm command + * that takes a queue id. + * # IDs must always be queried by this command before any use + * by the driver or software. + * # Any driver or software should not make any assumptions about + * queue IDs. + * # A value of 0xff indicates that the queue is not available. + * # Available queues may not be in sequential order. */ - #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_STAG_TPID UINT32_C(0x10) + uint8_t queue_id4; + /* This value is applicable to CoS queues only. */ + uint8_t queue_id4_service_profile; + /* Lossy (best-effort) */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSY \ + UINT32_C(0x0) + /* Lossless (legacy) */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSLESS \ + UINT32_C(0x1) + /* Lossless RoCE */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSLESS_ROCE \ + UINT32_C(0x1) + /* Lossy RoCE CNP */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSY_ROCE_CNP \ + UINT32_C(0x2) + /* Lossless NIC */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSLESS_NIC \ + UINT32_C(0x3) + /* Set to 0xFF... (All Fs) if there is no service profile specified */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_UNKNOWN \ + UINT32_C(0xff) + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LAST \ + HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_UNKNOWN /* - * This bit must be '1' for the ctag_tpid field to be - * configured. + * ID of CoS Queue 5. + * FF - Invalid id + * + * # This ID can be used on any subsequent call to an hwrm command + * that takes a queue id. + * # IDs must always be queried by this command before any use + * by the driver or software. + * # Any driver or software should not make any assumptions about + * queue IDs. + * # A value of 0xff indicates that the queue is not available. + * # Available queues may not be in sequential order. */ - #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_CTAG_TPID UINT32_C(0x20) - /* S-TAG VLAN identifier configured for the function. */ - uint16_t stag_vid; - /* S-TAG PCP value configured for the function. */ - uint8_t stag_pcp; - uint8_t unused_1; + uint8_t queue_id5; + /* This value is applicable to CoS queues only. */ + uint8_t queue_id5_service_profile; + /* Lossy (best-effort) */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSY \ + UINT32_C(0x0) + /* Lossless (legacy) */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSLESS \ + UINT32_C(0x1) + /* Lossless RoCE */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSLESS_ROCE \ + UINT32_C(0x1) + /* Lossy RoCE CNP */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSY_ROCE_CNP \ + UINT32_C(0x2) + /* Lossless NIC */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSLESS_NIC \ + UINT32_C(0x3) + /* Set to 0xFF... (All Fs) if there is no service profile specified */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_UNKNOWN \ + UINT32_C(0xff) + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LAST \ + HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_UNKNOWN /* - * S-TAG TPID value configured for the function. This field is specified in - * network byte order. + * ID of CoS Queue 6. + * FF - Invalid id + * + * # This ID can be used on any subsequent call to an hwrm command + * that takes a queue id. + * # IDs must always be queried by this command before any use + * by the driver or software. + * # Any driver or software should not make any assumptions about + * queue IDs. + * # A value of 0xff indicates that the queue is not available. + * # Available queues may not be in sequential order. */ - uint16_t stag_tpid; - /* C-TAG VLAN identifier configured for the function. */ - uint16_t ctag_vid; - /* C-TAG PCP value configured for the function. */ - uint8_t ctag_pcp; - uint8_t unused_2; + uint8_t queue_id6; + /* This value is applicable to CoS queues only. */ + uint8_t queue_id6_service_profile; + /* Lossy (best-effort) */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSY \ + UINT32_C(0x0) + /* Lossless (legacy) */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSLESS \ + UINT32_C(0x1) + /* Lossless RoCE */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSLESS_ROCE \ + UINT32_C(0x1) + /* Lossy RoCE CNP */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSY_ROCE_CNP \ + UINT32_C(0x2) + /* Lossless NIC */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSLESS_NIC \ + UINT32_C(0x3) + /* Set to 0xFF... (All Fs) if there is no service profile specified */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_UNKNOWN \ + UINT32_C(0xff) + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LAST \ + HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_UNKNOWN /* - * C-TAG TPID value configured for the function. This field is specified in - * network byte order. + * ID of CoS Queue 7. + * FF - Invalid id + * + * # This ID can be used on any subsequent call to an hwrm command + * that takes a queue id. + * # IDs must always be queried by this command before any use + * by the driver or software. + * # Any driver or software should not make any assumptions about + * queue IDs. + * # A value of 0xff indicates that the queue is not available. + * # Available queues may not be in sequential order. */ - uint16_t ctag_tpid; - /* Future use. */ - uint32_t rsvd1; - /* Future use. */ - uint32_t rsvd2; - uint8_t unused_3[4]; -} __attribute__((packed)); - -/* hwrm_func_vlan_cfg_output (size:128b/16B) */ -struct hwrm_func_vlan_cfg_output { - /* The specific error status for the command. */ - uint16_t error_code; - /* The HWRM command request type. */ - uint16_t req_type; - /* The sequence ID from the original command. */ - uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; - uint8_t unused_0[7]; + uint8_t queue_id7; + /* This value is applicable to CoS queues only. */ + uint8_t queue_id7_service_profile; + /* Lossy (best-effort) */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSY \ + UINT32_C(0x0) + /* Lossless (legacy) */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSLESS \ + UINT32_C(0x1) + /* Lossless RoCE */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSLESS_ROCE \ + UINT32_C(0x1) + /* Lossy RoCE CNP */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSY_ROCE_CNP \ + UINT32_C(0x2) + /* Lossless NIC */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSLESS_NIC \ + UINT32_C(0x3) + /* Set to 0xFF... (All Fs) if there is no service profile specified */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_UNKNOWN \ + UINT32_C(0xff) + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LAST \ + HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_UNKNOWN /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/******************************* - * hwrm_func_vf_vnic_ids_query * - *******************************/ +/******************* + * hwrm_queue_qcfg * + *******************/ -/* hwrm_func_vf_vnic_ids_query_input (size:256b/32B) */ -struct hwrm_func_vf_vnic_ids_query_input { +/* hwrm_queue_qcfg_input (size:192b/24B) */ +struct hwrm_queue_qcfg_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -10100,7 +21660,8 @@ struct hwrm_func_vf_vnic_ids_query_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -10111,20 +21672,25 @@ struct hwrm_func_vf_vnic_ids_query_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; + uint32_t flags; /* - * This value is used to identify a Virtual Function (VF). - * The scope of VF ID is local within a PF. + * Enumeration denoting the RX, TX type of the resource. + * This enumeration is used for resources that are similar for both + * TX and RX paths of the chip. */ - uint16_t vf_id; - uint8_t unused_0[2]; - /* Max number of vnic ids in vnic id table */ - uint32_t max_vnic_id_cnt; - /* This is the address for VF VNIC ID table */ - uint64_t vnic_id_tbl_addr; -} __attribute__((packed)); + #define HWRM_QUEUE_QCFG_INPUT_FLAGS_PATH UINT32_C(0x1) + /* tx path */ + #define HWRM_QUEUE_QCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0) + /* rx path */ + #define HWRM_QUEUE_QCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1) + #define HWRM_QUEUE_QCFG_INPUT_FLAGS_PATH_LAST \ + HWRM_QUEUE_QCFG_INPUT_FLAGS_PATH_RX + /* Queue ID of the queue. */ + uint32_t queue_id; +} __rte_packed; -/* hwrm_func_vf_vnic_ids_query_output (size:128b/16B) */ -struct hwrm_func_vf_vnic_ids_query_output { +/* hwrm_queue_qcfg_output (size:128b/16B) */ +struct hwrm_queue_qcfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -10134,29 +21700,48 @@ struct hwrm_func_vf_vnic_ids_query_output { /* The length of the response data in number of bytes. */ uint16_t resp_len; /* - * Actual number of vnic ids - * - * Each VNIC ID is written as a 32-bit number. + * This value is the estimate packet length used in the + * TX arbiter. */ - uint32_t vnic_id_cnt; - uint8_t unused_0[3]; + uint32_t queue_len; + /* This value is applicable to CoS queues only. */ + uint8_t service_profile; + /* Lossy (best-effort) */ + #define HWRM_QUEUE_QCFG_OUTPUT_SERVICE_PROFILE_LOSSY UINT32_C(0x0) + /* Lossless */ + #define HWRM_QUEUE_QCFG_OUTPUT_SERVICE_PROFILE_LOSSLESS UINT32_C(0x1) + /* Set to 0xFF... (All Fs) if there is no service profile specified */ + #define HWRM_QUEUE_QCFG_OUTPUT_SERVICE_PROFILE_UNKNOWN UINT32_C(0xff) + #define HWRM_QUEUE_QCFG_OUTPUT_SERVICE_PROFILE_LAST \ + HWRM_QUEUE_QCFG_OUTPUT_SERVICE_PROFILE_UNKNOWN + /* Information about queue configuration. */ + uint8_t queue_cfg_info; + /* + * If this flag is set to '1', then the queue is + * configured asymmetrically on TX and RX sides. + * If this flag is set to '0', then this queue is + * configured symmetrically on TX and RX sides. + */ + #define HWRM_QUEUE_QCFG_OUTPUT_QUEUE_CFG_INFO_ASYM_CFG \ + UINT32_C(0x1) + uint8_t unused_0; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/*********************** - * hwrm_func_vf_bw_cfg * - ***********************/ +/****************** + * hwrm_queue_cfg * + ******************/ -/* hwrm_func_vf_bw_cfg_input (size:960b/120B) */ -struct hwrm_func_vf_bw_cfg_input { +/* hwrm_queue_cfg_input (size:320b/40B) */ +struct hwrm_queue_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -10173,7 +21758,8 @@ struct hwrm_func_vf_bw_cfg_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -10184,77 +21770,56 @@ struct hwrm_func_vf_bw_cfg_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; + uint32_t flags; /* - * The number of VF functions that are being configured. - * The cmd space allows up to 50 VFs' BW to be configured with one cmd. + * Enumeration denoting the RX, TX, or both directions applicable to the resource. + * This enumeration is used for resources that are similar for both + * TX and RX paths of the chip. */ - uint16_t num_vfs; - uint16_t unused[3]; - /* These 16-bit fields contain the VF fid and the rate scale percentage. */ - uint16_t vfn[48]; - /* The physical VF id the adjustment will be made to. */ - #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_VFID_MASK UINT32_C(0xfff) - #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_VFID_SFT 0 + #define HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_MASK UINT32_C(0x3) + #define HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_SFT 0 + /* tx path */ + #define HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0) + /* rx path */ + #define HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1) + /* Bi-directional (Symmetrically applicable to TX and RX paths) */ + #define HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_BIDIR UINT32_C(0x2) + #define HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_LAST \ + HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_BIDIR + uint32_t enables; /* - * This field configures the rate scale percentage of the VF as specified - * by the physical VF id. + * This bit must be '1' for the dflt_len field to be + * configured. */ - #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_MASK UINT32_C(0xf000) - #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_SFT 12 - /* 0% of the max tx rate */ - #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_0 \ - (UINT32_C(0x0) << 12) - /* 6.66% of the max tx rate */ - #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_6_66 \ - (UINT32_C(0x1) << 12) - /* 13.33% of the max tx rate */ - #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_13_33 \ - (UINT32_C(0x2) << 12) - /* 20% of the max tx rate */ - #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_20 \ - (UINT32_C(0x3) << 12) - /* 26.66% of the max tx rate */ - #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_26_66 \ - (UINT32_C(0x4) << 12) - /* 33% of the max tx rate */ - #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_33_33 \ - (UINT32_C(0x5) << 12) - /* 40% of the max tx rate */ - #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_40 \ - (UINT32_C(0x6) << 12) - /* 46.66% of the max tx rate */ - #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_46_66 \ - (UINT32_C(0x7) << 12) - /* 53.33% of the max tx rate */ - #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_53_33 \ - (UINT32_C(0x8) << 12) - /* 60% of the max tx rate */ - #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_60 \ - (UINT32_C(0x9) << 12) - /* 66.66% of the max tx rate */ - #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_66_66 \ - (UINT32_C(0xa) << 12) - /* 53.33% of the max tx rate */ - #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_73_33 \ - (UINT32_C(0xb) << 12) - /* 80% of the max tx rate */ - #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_80 \ - (UINT32_C(0xc) << 12) - /* 86.66% of the max tx rate */ - #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_86_66 \ - (UINT32_C(0xd) << 12) - /* 93.33% of the max tx rate */ - #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_93_33 \ - (UINT32_C(0xe) << 12) - /* 100% of the max tx rate */ - #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_100 \ - (UINT32_C(0xf) << 12) - #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_LAST \ - HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_100 -} __attribute__((packed)); + #define HWRM_QUEUE_CFG_INPUT_ENABLES_DFLT_LEN UINT32_C(0x1) + /* + * This bit must be '1' for the service_profile field to be + * configured. + */ + #define HWRM_QUEUE_CFG_INPUT_ENABLES_SERVICE_PROFILE UINT32_C(0x2) + /* Queue ID of queue that is to be configured by this function. */ + uint32_t queue_id; + /* + * This value is a the estimate packet length used in the + * TX arbiter. + * Set to 0xFF... (All Fs) to not adjust this value. + */ + uint32_t dflt_len; + /* This value is applicable to CoS queues only. */ + uint8_t service_profile; + /* Lossy (best-effort) */ + #define HWRM_QUEUE_CFG_INPUT_SERVICE_PROFILE_LOSSY UINT32_C(0x0) + /* Lossless */ + #define HWRM_QUEUE_CFG_INPUT_SERVICE_PROFILE_LOSSLESS UINT32_C(0x1) + /* Set to 0xFF... (All Fs) if there is no service profile specified */ + #define HWRM_QUEUE_CFG_INPUT_SERVICE_PROFILE_UNKNOWN UINT32_C(0xff) + #define HWRM_QUEUE_CFG_INPUT_SERVICE_PROFILE_LAST \ + HWRM_QUEUE_CFG_INPUT_SERVICE_PROFILE_UNKNOWN + uint8_t unused_0[7]; +} __rte_packed; -/* hwrm_func_vf_bw_cfg_output (size:128b/16B) */ -struct hwrm_func_vf_bw_cfg_output { +/* hwrm_queue_cfg_output (size:128b/16B) */ +struct hwrm_queue_cfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -10266,21 +21831,21 @@ struct hwrm_func_vf_bw_cfg_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/************************ - * hwrm_func_vf_bw_qcfg * - ************************/ +/***************************** + * hwrm_queue_pfcenable_qcfg * + *****************************/ -/* hwrm_func_vf_bw_qcfg_input (size:960b/120B) */ -struct hwrm_func_vf_bw_qcfg_input { +/* hwrm_queue_pfcenable_qcfg_input (size:192b/24B) */ +struct hwrm_queue_pfcenable_qcfg_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -10297,7 +21862,8 @@ struct hwrm_func_vf_bw_qcfg_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -10309,21 +21875,16 @@ struct hwrm_func_vf_bw_qcfg_input { */ uint64_t resp_addr; /* - * The number of VF functions that are being queried. - * The inline response space allows the host to query up to 50 VFs' - * rate scale percentage + * Port ID of port for which the table is being configured. + * The HWRM needs to check whether this function is allowed + * to configure pri2cos mapping on this port. */ - uint16_t num_vfs; - uint16_t unused[3]; - /* These 16-bit fields contain the VF fid */ - uint16_t vfn[48]; - /* The physical VF id of interest */ - #define HWRM_FUNC_VF_BW_QCFG_INPUT_VFN_VFID_MASK UINT32_C(0xfff) - #define HWRM_FUNC_VF_BW_QCFG_INPUT_VFN_VFID_SFT 0 -} __attribute__((packed)); + uint16_t port_id; + uint8_t unused_0[6]; +} __rte_packed; -/* hwrm_func_vf_bw_qcfg_output (size:960b/120B) */ -struct hwrm_func_vf_bw_qcfg_output { +/* hwrm_queue_pfcenable_qcfg_output (size:128b/16B) */ +struct hwrm_queue_pfcenable_qcfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -10332,92 +21893,73 @@ struct hwrm_func_vf_bw_qcfg_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* - * The number of VF functions that are being queried. - * The inline response space allows the host to query up to 50 VFs' rate - * scale percentage - */ - uint16_t num_vfs; - uint16_t unused[3]; - /* These 16-bit fields contain the VF fid and the rate scale percentage. */ - uint16_t vfn[48]; - /* The physical VF id the adjustment will be made to. */ - #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_VFID_MASK UINT32_C(0xfff) - #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_VFID_SFT 0 - /* - * This field configures the rate scale percentage of the VF as specified - * by the physical VF id. - */ - #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_MASK UINT32_C(0xf000) - #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_SFT 12 - /* 0% of the max tx rate */ - #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_0 \ - (UINT32_C(0x0) << 12) - /* 6.66% of the max tx rate */ - #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_6_66 \ - (UINT32_C(0x1) << 12) - /* 13.33% of the max tx rate */ - #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_13_33 \ - (UINT32_C(0x2) << 12) - /* 20% of the max tx rate */ - #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_20 \ - (UINT32_C(0x3) << 12) - /* 26.66% of the max tx rate */ - #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_26_66 \ - (UINT32_C(0x4) << 12) - /* 33% of the max tx rate */ - #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_33_33 \ - (UINT32_C(0x5) << 12) - /* 40% of the max tx rate */ - #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_40 \ - (UINT32_C(0x6) << 12) - /* 46.66% of the max tx rate */ - #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_46_66 \ - (UINT32_C(0x7) << 12) - /* 53.33% of the max tx rate */ - #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_53_33 \ - (UINT32_C(0x8) << 12) - /* 60% of the max tx rate */ - #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_60 \ - (UINT32_C(0x9) << 12) - /* 66.66% of the max tx rate */ - #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_66_66 \ - (UINT32_C(0xa) << 12) - /* 53.33% of the max tx rate */ - #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_73_33 \ - (UINT32_C(0xb) << 12) - /* 80% of the max tx rate */ - #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_80 \ - (UINT32_C(0xc) << 12) - /* 86.66% of the max tx rate */ - #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_86_66 \ - (UINT32_C(0xd) << 12) - /* 93.33% of the max tx rate */ - #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_93_33 \ - (UINT32_C(0xe) << 12) - /* 100% of the max tx rate */ - #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_100 \ - (UINT32_C(0xf) << 12) - #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_LAST \ - HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_100 - uint8_t unused_0[7]; + uint32_t flags; + /* If set to 1, then PFC is enabled on PRI 0. */ + #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI0_PFC_ENABLED \ + UINT32_C(0x1) + /* If set to 1, then PFC is enabled on PRI 1. */ + #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI1_PFC_ENABLED \ + UINT32_C(0x2) + /* If set to 1, then PFC is enabled on PRI 2. */ + #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI2_PFC_ENABLED \ + UINT32_C(0x4) + /* If set to 1, then PFC is enabled on PRI 3. */ + #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI3_PFC_ENABLED \ + UINT32_C(0x8) + /* If set to 1, then PFC is enabled on PRI 4. */ + #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI4_PFC_ENABLED \ + UINT32_C(0x10) + /* If set to 1, then PFC is enabled on PRI 5. */ + #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI5_PFC_ENABLED \ + UINT32_C(0x20) + /* If set to 1, then PFC is enabled on PRI 6. */ + #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI6_PFC_ENABLED \ + UINT32_C(0x40) + /* If set to 1, then PFC is enabled on PRI 7. */ + #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI7_PFC_ENABLED \ + UINT32_C(0x80) + /* If set to 1, then PFC WatchDog is requested to be enabled on PRI0. */ + #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI0_PFC_WATCHDOG_ENABLED \ + UINT32_C(0x100) + /* If set to 1, then PFC WatchDog is requested to be enabled on PRI1. */ + #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI1_PFC_WATCHDOG_ENABLED \ + UINT32_C(0x200) + /* If set to 1, then PFC WatchDog is requested to be enabled on PRI2. */ + #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI2_PFC_WATCHDOG_ENABLED \ + UINT32_C(0x400) + /* If set to 1, then PFC WatchDog is requested to be enabled on PRI3. */ + #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI3_PFC_WATCHDOG_ENABLED \ + UINT32_C(0x800) + /* If set to 1, then PFC WatchDog is requested to be enabled on PRI4. */ + #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI4_PFC_WATCHDOG_ENABLED \ + UINT32_C(0x1000) + /* If set to 1, then PFC WatchDog is requested to be enabled on PRI5. */ + #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI5_PFC_WATCHDOG_ENABLED \ + UINT32_C(0x2000) + /* If set to 1, then PFC WatchDog is requested to be enabled on PRI6. */ + #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI6_PFC_WATCHDOG_ENABLED \ + UINT32_C(0x4000) + /* If set to 1, then PFC WatchDog is requested to be enabled on PRI7. */ + #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI7_PFC_WATCHDOG_ENABLED \ + UINT32_C(0x8000) + uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/*************************** - * hwrm_func_drv_if_change * - ***************************/ +/**************************** + * hwrm_queue_pfcenable_cfg * + ****************************/ -/* hwrm_func_drv_if_change_input (size:192b/24B) */ -struct hwrm_func_drv_if_change_input { +/* hwrm_queue_pfcenable_cfg_input (size:192b/24B) */ +struct hwrm_queue_pfcenable_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -10434,7 +21976,8 @@ struct hwrm_func_drv_if_change_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -10446,25 +21989,65 @@ struct hwrm_func_drv_if_change_input { */ uint64_t resp_addr; uint32_t flags; + /* If set to 1, then PFC is requested to be enabled on PRI 0. */ + #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI0_PFC_ENABLED \ + UINT32_C(0x1) + /* If set to 1, then PFC is requested to be enabled on PRI 1. */ + #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI1_PFC_ENABLED \ + UINT32_C(0x2) + /* If set to 1, then PFC is requested to be enabled on PRI 2. */ + #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI2_PFC_ENABLED \ + UINT32_C(0x4) + /* If set to 1, then PFC is requested to be enabled on PRI 3. */ + #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI3_PFC_ENABLED \ + UINT32_C(0x8) + /* If set to 1, then PFC is requested to be enabled on PRI 4. */ + #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI4_PFC_ENABLED \ + UINT32_C(0x10) + /* If set to 1, then PFC is requested to be enabled on PRI 5. */ + #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI5_PFC_ENABLED \ + UINT32_C(0x20) + /* If set to 1, then PFC is requested to be enabled on PRI 6. */ + #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI6_PFC_ENABLED \ + UINT32_C(0x40) + /* If set to 1, then PFC is requested to be enabled on PRI 7. */ + #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI7_PFC_ENABLED \ + UINT32_C(0x80) + /* If set to 1, then PFC WatchDog is requested to be enabled on PRI0. */ + #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI0_PFC_WATCHDOG_ENABLED \ + UINT32_C(0x100) + /* If set to 1, then PFC WatchDog is requested to be enabled on PRI1. */ + #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI1_PFC_WATCHDOG_ENABLED \ + UINT32_C(0x200) + /* If set to 1, then PFC WatchDog is requested to be enabled on PRI2. */ + #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI2_PFC_WATCHDOG_ENABLED \ + UINT32_C(0x400) + /* If set to 1, then PFC WatchDog is requested to be enabled on PRI3. */ + #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI3_PFC_WATCHDOG_ENABLED \ + UINT32_C(0x800) + /* If set to 1, then PFC WatchDog is requested to be enabled on PRI4. */ + #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI4_PFC_WATCHDOG_ENABLED \ + UINT32_C(0x1000) + /* If set to 1, then PFC WatchDog is requested to be enabled on PRI5. */ + #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI5_PFC_WATCHDOG_ENABLED \ + UINT32_C(0x2000) + /* If set to 1, then PFC WatchDog is requested to be enabled on PRI6. */ + #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI6_PFC_WATCHDOG_ENABLED \ + UINT32_C(0x4000) + /* If set to 1, then PFC WatchDog is requested to be enabled on PRI7. */ + #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI7_PFC_WATCHDOG_ENABLED \ + UINT32_C(0x8000) /* - * When this bit is '1', the function driver is indicating - * that the IF state is changing to UP state. The call should - * be made at the beginning of the driver's open call before - * resources are allocated. After making the call, the driver - * should check the response to see if any resources may have - * changed (see the response below). If the driver fails - * the open call, the driver should make this call again with - * this bit cleared to indicate that the IF state is not UP. - * During the driver's close call when the IF state is changing - * to DOWN, the driver should make this call with the bit cleared - * after all resources have been freed. + * Port ID of port for which the table is being configured. + * The HWRM needs to check whether this function is allowed + * to configure pri2cos mapping on this port. */ - #define HWRM_FUNC_DRV_IF_CHANGE_INPUT_FLAGS_UP UINT32_C(0x1) - uint32_t unused; -} __attribute__((packed)); + uint16_t port_id; + uint8_t unused_0[2]; +} __rte_packed; -/* hwrm_func_drv_if_change_output (size:128b/16B) */ -struct hwrm_func_drv_if_change_output { +/* hwrm_queue_pfcenable_cfg_output (size:128b/16B) */ +struct hwrm_queue_pfcenable_cfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -10473,33 +22056,24 @@ struct hwrm_func_drv_if_change_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - uint32_t flags; - /* - * When this bit is '1', it indicates that the resources reserved - * for this function may have changed. The driver should check - * resource capabilities and reserve resources again before - * allocating resources. - */ - #define HWRM_FUNC_DRV_IF_CHANGE_OUTPUT_FLAGS_RESC_CHANGE \ - UINT32_C(0x1) - uint8_t unused_0[3]; + uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/********************* - * hwrm_port_phy_cfg * - *********************/ +/*************************** + * hwrm_queue_pri2cos_qcfg * + ***************************/ -/* hwrm_port_phy_cfg_input (size:448b/56B) */ -struct hwrm_port_phy_cfg_input { +/* hwrm_queue_pri2cos_qcfg_input (size:192b/24B) */ +struct hwrm_queue_pri2cos_qcfg_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -10516,7 +22090,8 @@ struct hwrm_port_phy_cfg_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -10529,1423 +22104,2439 @@ struct hwrm_port_phy_cfg_input { uint64_t resp_addr; uint32_t flags; /* - * When this bit is set to '1', the PHY for the port shall - * be reset. - * - * # If this bit is set to 1, then the HWRM shall reset the - * PHY after applying PHY configuration changes specified - * in this command. - * # In order to guarantee that PHY configuration changes - * specified in this command take effect, the HWRM - * client should set this flag to 1. - * # If this bit is not set to 1, then the HWRM may reset - * the PHY depending on the current PHY configuration and - * settings specified in this command. + * Enumeration denoting the RX, TX type of the resource. + * This enumeration is used for resources that are similar for both + * TX and RX paths of the chip. */ - #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_RESET_PHY \ - UINT32_C(0x1) - /* deprecated bit. Do not use!!! */ - #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_DEPRECATED \ - UINT32_C(0x2) + #define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_PATH UINT32_C(0x1) + /* tx path */ + #define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0) + /* rx path */ + #define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1) + #define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_PATH_LAST \ + HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_PATH_RX /* - * When this bit is set to '1', the link shall be forced to - * the force_link_speed value. - * - * When this bit is set to '1', the HWRM client should - * not enable any of the auto negotiation related - * fields represented by auto_XXX fields in this command. - * When this bit is set to '1' and the HWRM client has - * enabled a auto_XXX field in this command, then the - * HWRM shall ignore the enabled auto_XXX field. - * - * When this bit is set to zero, the link - * shall be allowed to autoneg. + * When this bit is set to '0', the query is + * for PRI from tunnel headers. + * When this bit is set to '1', the query is + * for PRI from inner packet headers. */ - #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FORCE \ - UINT32_C(0x4) + #define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_IVLAN UINT32_C(0x2) /* - * When this bit is set to '1', the auto-negotiation process - * shall be restarted on the link. + * Port ID of port for which the table is being configured. + * The HWRM needs to check whether this function is allowed + * to configure pri2cos mapping on this port. */ - #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_RESTART_AUTONEG \ - UINT32_C(0x8) + uint8_t port_id; + uint8_t unused_0[3]; +} __rte_packed; + +/* hwrm_queue_pri2cos_qcfg_output (size:192b/24B) */ +struct hwrm_queue_pri2cos_qcfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; /* - * When this bit is set to '1', Energy Efficient Ethernet - * (EEE) is requested to be enabled on this link. - * If EEE is not supported on this port, then this flag - * shall be ignored by the HWRM. + * CoS Queue assigned to priority 0. This value can only + * be changed before traffic has started. + * A value of 0xff indicates that no CoS queue is assigned to the + * specified priority. */ - #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_ENABLE \ - UINT32_C(0x10) + uint8_t pri0_cos_queue_id; /* - * When this bit is set to '1', Energy Efficient Ethernet - * (EEE) is requested to be disabled on this link. - * If EEE is not supported on this port, then this flag - * shall be ignored by the HWRM. + * CoS Queue assigned to priority 1. This value can only + * be changed before traffic has started. + * A value of 0xff indicates that no CoS queue is assigned to the + * specified priority. */ - #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_DISABLE \ - UINT32_C(0x20) + uint8_t pri1_cos_queue_id; /* - * When this bit is set to '1' and EEE is enabled on this - * link, then TX LPI is requested to be enabled on the link. - * If EEE is not supported on this port, then this flag - * shall be ignored by the HWRM. - * If EEE is disabled on this port, then this flag shall be - * ignored by the HWRM. + * CoS Queue assigned to priority 2. This value can only + * be changed before traffic has started. + * A value of 0xff indicates that no CoS queue is assigned to the + * specified priority. */ - #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_TX_LPI_ENABLE \ - UINT32_C(0x40) + uint8_t pri2_cos_queue_id; /* - * When this bit is set to '1' and EEE is enabled on this - * link, then TX LPI is requested to be disabled on the link. - * If EEE is not supported on this port, then this flag - * shall be ignored by the HWRM. - * If EEE is disabled on this port, then this flag shall be - * ignored by the HWRM. + * CoS Queue assigned to priority 3. This value can only + * be changed before traffic has started. + * A value of 0xff indicates that no CoS queue is assigned to the + * specified priority. */ - #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_TX_LPI_DISABLE \ - UINT32_C(0x80) + uint8_t pri3_cos_queue_id; /* - * When set to 1, then the HWRM shall enable FEC autonegotitation - * on this port if supported. - * When set to 0, then this flag shall be ignored. - * If FEC autonegotiation is not supported, then the HWRM shall ignore this - * flag. + * CoS Queue assigned to priority 4. This value can only + * be changed before traffic has started. + * A value of 0xff indicates that no CoS queue is assigned to the + * specified priority. + */ + uint8_t pri4_cos_queue_id; + /* + * CoS Queue assigned to priority 5. This value can only + * be changed before traffic has started. + * A value of 0xff indicates that no CoS queue is assigned to the + * specified priority. + */ + uint8_t pri5_cos_queue_id; + /* + * CoS Queue assigned to priority 6. This value can only + * be changed before traffic has started. + * A value of 0xff indicates that no CoS queue is assigned to the + * specified priority. + */ + uint8_t pri6_cos_queue_id; + /* + * CoS Queue assigned to priority 7. This value can only + * be changed before traffic has started. + * A value of 0xff indicates that no CoS queue is assigned to the + * specified priority. + */ + uint8_t pri7_cos_queue_id; + /* Information about queue configuration. */ + uint8_t queue_cfg_info; + /* + * If this flag is set to '1', then the PRI to CoS + * configuration is asymmetric on TX and RX sides. + * If this flag is set to '0', then PRI to CoS configuration + * is symmetric on TX and RX sides. + */ + #define HWRM_QUEUE_PRI2COS_QCFG_OUTPUT_QUEUE_CFG_INFO_ASYM_CFG \ + UINT32_C(0x1) + uint8_t unused_0[6]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_AUTONEG_ENABLE \ - UINT32_C(0x100) + uint8_t valid; +} __rte_packed; + +/************************** + * hwrm_queue_pri2cos_cfg * + **************************/ + + +/* hwrm_queue_pri2cos_cfg_input (size:320b/40B) */ +struct hwrm_queue_pri2cos_cfg_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * When set to 1, then the HWRM shall disable FEC autonegotiation - * on this port if supported. - * When set to 0, then this flag shall be ignored. - * If FEC autonegotiation is not supported, then the HWRM shall ignore this - * flag. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_AUTONEG_DISABLE \ - UINT32_C(0x200) + uint16_t cmpl_ring; /* - * When set to 1, then the HWRM shall enable FEC CLAUSE 74 (Fire Code) - * on this port if supported. - * When set to 0, then this flag shall be ignored. - * If FEC CLAUSE 74 is not supported, then the HWRM shall ignore this - * flag. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE74_ENABLE \ - UINT32_C(0x400) + uint16_t seq_id; /* - * When set to 1, then the HWRM shall disable FEC CLAUSE 74 (Fire Code) - * on this port if supported. - * When set to 0, then this flag shall be ignored. - * If FEC CLAUSE 74 is not supported, then the HWRM shall ignore this - * flag. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE74_DISABLE \ - UINT32_C(0x800) + uint16_t target_id; /* - * When set to 1, then the HWRM shall enable FEC CLAUSE 91 (Reed Solomon) - * on this port if supported. - * When set to 0, then this flag shall be ignored. - * If FEC CLAUSE 91 is not supported, then the HWRM shall ignore this - * flag. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE91_ENABLE \ - UINT32_C(0x1000) + uint64_t resp_addr; + uint32_t flags; /* - * When set to 1, then the HWRM shall disable FEC CLAUSE 91 (Reed Solomon) - * on this port if supported. - * When set to 0, then this flag shall be ignored. - * If FEC CLAUSE 91 is not supported, then the HWRM shall ignore this - * flag. + * Enumeration denoting the RX, TX, or both directions applicable to the resource. + * This enumeration is used for resources that are similar for both + * TX and RX paths of the chip. */ - #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE91_DISABLE \ - UINT32_C(0x2000) + #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_MASK UINT32_C(0x3) + #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_SFT 0 + /* tx path */ + #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0) + /* rx path */ + #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1) + /* Bi-directional (Symmetrically applicable to TX and RX paths) */ + #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_BIDIR UINT32_C(0x2) + #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_LAST \ + HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_BIDIR /* - * When this bit is set to '1', the link shall be forced to - * be taken down. - * - * # When this bit is set to '1", all other - * command input settings related to the link speed shall - * be ignored. - * Once the link state is forced down, it can be - * explicitly cleared from that state by setting this flag - * to '0'. - * # If this flag is set to '0', then the link shall be - * cleared from forced down state if the link is in forced - * down state. - * There may be conditions (e.g. out-of-band or sideband - * configuration changes for the link) outside the scope - * of the HWRM implementation that may clear forced down - * link state. + * When this bit is set to '0', the mapping is requested + * for PRI from tunnel headers. + * When this bit is set to '1', the mapping is requested + * for PRI from inner packet headers. */ - #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FORCE_LINK_DWN \ - UINT32_C(0x4000) + #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_IVLAN UINT32_C(0x4) uint32_t enables; /* - * This bit must be '1' for the auto_mode field to be + * This bit must be '1' for the pri0_cos_queue_id field to be * configured. */ - #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_MODE \ + #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI0_COS_QUEUE_ID \ UINT32_C(0x1) /* - * This bit must be '1' for the auto_duplex field to be + * This bit must be '1' for the pri1_cos_queue_id field to be * configured. */ - #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_DUPLEX \ + #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI1_COS_QUEUE_ID \ UINT32_C(0x2) /* - * This bit must be '1' for the auto_pause field to be + * This bit must be '1' for the pri2_cos_queue_id field to be * configured. */ - #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_PAUSE \ + #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI2_COS_QUEUE_ID \ UINT32_C(0x4) /* - * This bit must be '1' for the auto_link_speed field to be + * This bit must be '1' for the pri3_cos_queue_id field to be * configured. */ - #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_LINK_SPEED \ + #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI3_COS_QUEUE_ID \ UINT32_C(0x8) /* - * This bit must be '1' for the auto_link_speed_mask field to be + * This bit must be '1' for the pri4_cos_queue_id field to be * configured. */ - #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_LINK_SPEED_MASK \ + #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI4_COS_QUEUE_ID \ UINT32_C(0x10) /* - * This bit must be '1' for the wirespeed field to be + * This bit must be '1' for the pri5_cos_queue_id field to be * configured. */ - #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_WIRESPEED \ + #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI5_COS_QUEUE_ID \ UINT32_C(0x20) /* - * This bit must be '1' for the lpbk field to be + * This bit must be '1' for the pri6_cos_queue_id field to be * configured. */ - #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_LPBK \ + #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI6_COS_QUEUE_ID \ UINT32_C(0x40) /* - * This bit must be '1' for the preemphasis field to be + * This bit must be '1' for the pri7_cos_queue_id field to be * configured. */ - #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_PREEMPHASIS \ + #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI7_COS_QUEUE_ID \ UINT32_C(0x80) /* - * This bit must be '1' for the force_pause field to be - * configured. + * Port ID of port for which the table is being configured. + * The HWRM needs to check whether this function is allowed + * to configure pri2cos mapping on this port. */ - #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_FORCE_PAUSE \ - UINT32_C(0x100) + uint8_t port_id; /* - * This bit must be '1' for the eee_link_speed_mask field to be - * configured. + * CoS Queue assigned to priority 0. This value can only + * be changed before traffic has started. */ - #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_EEE_LINK_SPEED_MASK \ - UINT32_C(0x200) + uint8_t pri0_cos_queue_id; /* - * This bit must be '1' for the tx_lpi_timer field to be - * configured. + * CoS Queue assigned to priority 1. This value can only + * be changed before traffic has started. */ - #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_TX_LPI_TIMER \ - UINT32_C(0x400) - /* Port ID of port that is to be configured. */ - uint16_t port_id; + uint8_t pri1_cos_queue_id; /* - * This is the speed that will be used if the force - * bit is '1'. If unsupported speed is selected, an error - * will be generated. + * CoS Queue assigned to priority 2 This value can only + * be changed before traffic has started. */ - uint16_t force_link_speed; - /* 100Mb link speed */ - #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_100MB UINT32_C(0x1) - /* 1Gb link speed */ - #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_1GB UINT32_C(0xa) - /* 2Gb link speed */ - #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_2GB UINT32_C(0x14) - /* 25Gb link speed */ - #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_2_5GB UINT32_C(0x19) - /* 10Gb link speed */ - #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_10GB UINT32_C(0x64) - /* 20Mb link speed */ - #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_20GB UINT32_C(0xc8) - /* 25Gb link speed */ - #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_25GB UINT32_C(0xfa) - /* 40Gb link speed */ - #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_40GB UINT32_C(0x190) - /* 50Gb link speed */ - #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_50GB UINT32_C(0x1f4) - /* 100Gb link speed */ - #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_100GB UINT32_C(0x3e8) - /* 10Mb link speed */ - #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_10MB UINT32_C(0xffff) - #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_LAST \ - HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_10MB + uint8_t pri2_cos_queue_id; /* - * This value is used to identify what autoneg mode is - * used when the link speed is not being forced. + * CoS Queue assigned to priority 3. This value can only + * be changed before traffic has started. */ - uint8_t auto_mode; - /* Disable autoneg or autoneg disabled. No speeds are selected. */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_NONE UINT32_C(0x0) - /* Select all possible speeds for autoneg mode. */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ALL_SPEEDS UINT32_C(0x1) + uint8_t pri3_cos_queue_id; /* - * Select only the auto_link_speed speed for autoneg mode. This mode has - * been DEPRECATED. An HWRM client should not use this mode. + * CoS Queue assigned to priority 4. This value can only + * be changed before traffic has started. + */ + uint8_t pri4_cos_queue_id; + /* + * CoS Queue assigned to priority 5. This value can only + * be changed before traffic has started. + */ + uint8_t pri5_cos_queue_id; + /* + * CoS Queue assigned to priority 6. This value can only + * be changed before traffic has started. + */ + uint8_t pri6_cos_queue_id; + /* + * CoS Queue assigned to priority 7. This value can only + * be changed before traffic has started. + */ + uint8_t pri7_cos_queue_id; + uint8_t unused_0[7]; +} __rte_packed; + +/* hwrm_queue_pri2cos_cfg_output (size:128b/16B) */ +struct hwrm_queue_pri2cos_cfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/************************** + * hwrm_queue_cos2bw_qcfg * + **************************/ + + +/* hwrm_queue_cos2bw_qcfg_input (size:192b/24B) */ +struct hwrm_queue_cos2bw_qcfg_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ONE_SPEED UINT32_C(0x2) + uint16_t seq_id; /* - * Select the auto_link_speed or any speed below that speed for autoneg. - * This mode has been DEPRECATED. An HWRM client should not use this mode. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ONE_OR_BELOW UINT32_C(0x3) + uint16_t target_id; /* - * Select the speeds based on the corresponding link speed mask value - * that is provided. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_SPEED_MASK UINT32_C(0x4) - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_LAST \ - HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_SPEED_MASK + uint64_t resp_addr; /* - * This is the duplex setting that will be used if the autoneg_mode - * is "one_speed" or "one_or_below". + * Port ID of port for which the table is being configured. + * The HWRM needs to check whether this function is allowed + * to configure TC BW assignment on this port. */ - uint8_t auto_duplex; - /* Half Duplex will be requested. */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_HALF UINT32_C(0x0) - /* Full duplex will be requested. */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_FULL UINT32_C(0x1) - /* Both Half and Full dupex will be requested. */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_BOTH UINT32_C(0x2) - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_LAST \ - HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_BOTH + uint16_t port_id; + uint8_t unused_0[6]; +} __rte_packed; + +/* hwrm_queue_cos2bw_qcfg_output (size:896b/112B) */ +struct hwrm_queue_cos2bw_qcfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* ID of CoS Queue 0. */ + uint8_t queue_id0; + uint8_t unused_0; + uint16_t unused_1; /* - * This value is used to configure the pause that will be - * used for autonegotiation. - * Add text on the usage of auto_pause and force_pause. + * Minimum BW allocated to CoS Queue. + * The HWRM will translate this value into byte counter and + * time interval used for this COS inside the device. */ - uint8_t auto_pause; + uint32_t queue_id0_min_bw; + /* The bandwidth value. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_SCALE_LAST \ + HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_LAST \ + HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_INVALID /* - * When this bit is '1', Generation of tx pause messages - * has been requested. Disabled otherwise. + * Maximum BW allocated to CoS Queue. + * The HWRM will translate this value into byte counter and + * time interval used for this COS inside the device. */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_TX \ + uint32_t queue_id0_max_bw; + /* The bandwidth value. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_SCALE_LAST \ + HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_LAST \ + HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_INVALID + /* Transmission Selection Algorithm (TSA) for CoS Queue. */ + uint8_t queue_id0_tsa_assign; + /* Strict Priority */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_TSA_ASSIGN_SP \ + UINT32_C(0x0) + /* Enhanced Transmission Selection */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_TSA_ASSIGN_ETS \ UINT32_C(0x1) + /* reserved. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_TSA_ASSIGN_RESERVED_FIRST \ + UINT32_C(0x2) + /* reserved. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_TSA_ASSIGN_RESERVED_LAST \ + UINT32_C(0xff) /* - * When this bit is '1', Reception of rx pause messages - * has been requested. Disabled otherwise. + * Priority level for strict priority. Valid only when the + * tsa_assign is 0 - Strict Priority (SP) + * 0..7 - Valid values. + * 8..255 - Reserved. */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_RX \ - UINT32_C(0x2) + uint8_t queue_id0_pri_lvl; /* - * When set to 1, the advertisement of pause is enabled. - * - * # When the auto_mode is not set to none and this flag is - * set to 1, then the auto_pause bits on this port are being - * advertised and autoneg pause results are being interpreted. - * # When the auto_mode is not set to none and this - * flag is set to 0, the pause is forced as indicated in - * force_pause, and also advertised as auto_pause bits, but - * the autoneg results are not interpreted since the pause - * configuration is being forced. - * # When the auto_mode is set to none and this flag is set to - * 1, auto_pause bits should be ignored and should be set to 0. + * Weight used to allocate remaining BW for this COS after + * servicing guaranteed bandwidths for all COS. */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_AUTONEG_PAUSE \ - UINT32_C(0x4) - uint8_t unused_0; + uint8_t queue_id0_bw_weight; + /* ID of CoS Queue 1. */ + uint8_t queue_id1; /* - * This is the speed that will be used if the autoneg_mode - * is "one_speed" or "one_or_below". If an unsupported speed - * is selected, an error will be generated. + * Minimum BW allocated to CoS Queue. + * The HWRM will translate this value into byte counter and + * time interval used for this COS inside the device. */ - uint16_t auto_link_speed; - /* 100Mb link speed */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_100MB UINT32_C(0x1) - /* 1Gb link speed */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_1GB UINT32_C(0xa) - /* 2Gb link speed */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_2GB UINT32_C(0x14) - /* 25Gb link speed */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_2_5GB UINT32_C(0x19) - /* 10Gb link speed */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_10GB UINT32_C(0x64) - /* 20Mb link speed */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_20GB UINT32_C(0xc8) - /* 25Gb link speed */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_25GB UINT32_C(0xfa) - /* 40Gb link speed */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_40GB UINT32_C(0x190) - /* 50Gb link speed */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_50GB UINT32_C(0x1f4) - /* 100Gb link speed */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_100GB UINT32_C(0x3e8) - /* 10Mb link speed */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_10MB UINT32_C(0xffff) - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_LAST \ - HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_10MB + uint32_t queue_id1_min_bw; + /* The bandwidth value. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_SCALE_LAST \ + HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_LAST \ + HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_INVALID /* - * This is a mask of link speeds that will be used if - * autoneg_mode is "mask". If unsupported speed is enabled - * an error will be generated. + * Maximum BW allocated to CoS queue. + * The HWRM will translate this value into byte counter and + * time interval used for this COS inside the device. */ - uint16_t auto_link_speed_mask; - /* 100Mb link speed (Half-duplex) */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100MBHD \ + uint32_t queue_id1_max_bw; + /* The bandwidth value. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_SCALE_LAST \ + HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_LAST \ + HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_INVALID + /* Transmission Selection Algorithm (TSA) for CoS Queue. */ + uint8_t queue_id1_tsa_assign; + /* Strict Priority */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_TSA_ASSIGN_SP \ + UINT32_C(0x0) + /* Enhanced Transmission Selection */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_TSA_ASSIGN_ETS \ UINT32_C(0x1) - /* 100Mb link speed (Full-duplex) */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100MB \ + /* reserved. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_TSA_ASSIGN_RESERVED_FIRST \ UINT32_C(0x2) - /* 1Gb link speed (Half-duplex) */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_1GBHD \ - UINT32_C(0x4) - /* 1Gb link speed (Full-duplex) */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_1GB \ - UINT32_C(0x8) - /* 2Gb link speed */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_2GB \ - UINT32_C(0x10) - /* 25Gb link speed */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_2_5GB \ - UINT32_C(0x20) - /* 10Gb link speed */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10GB \ - UINT32_C(0x40) - /* 20Gb link speed */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_20GB \ - UINT32_C(0x80) - /* 25Gb link speed */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_25GB \ - UINT32_C(0x100) - /* 40Gb link speed */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_40GB \ - UINT32_C(0x200) - /* 50Gb link speed */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_50GB \ - UINT32_C(0x400) - /* 100Gb link speed */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100GB \ - UINT32_C(0x800) - /* 10Mb link speed (Half-duplex) */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10MBHD \ - UINT32_C(0x1000) - /* 10Mb link speed (Full-duplex) */ - #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10MB \ - UINT32_C(0x2000) - /* This value controls the wirespeed feature. */ - uint8_t wirespeed; - /* Wirespeed feature is disabled. */ - #define HWRM_PORT_PHY_CFG_INPUT_WIRESPEED_OFF UINT32_C(0x0) - /* Wirespeed feature is enabled. */ - #define HWRM_PORT_PHY_CFG_INPUT_WIRESPEED_ON UINT32_C(0x1) - #define HWRM_PORT_PHY_CFG_INPUT_WIRESPEED_LAST \ - HWRM_PORT_PHY_CFG_INPUT_WIRESPEED_ON - /* This value controls the loopback setting for the PHY. */ - uint8_t lpbk; - /* No loopback is selected. Normal operation. */ - #define HWRM_PORT_PHY_CFG_INPUT_LPBK_NONE UINT32_C(0x0) + /* reserved. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_TSA_ASSIGN_RESERVED_LAST \ + UINT32_C(0xff) /* - * The HW will be configured with local loopback such that - * host data is sent back to the host without modification. + * Priority level for strict priority. Valid only when the + * tsa_assign is 0 - Strict Priority (SP) + * 0..7 - Valid values. + * 8..255 - Reserved. */ - #define HWRM_PORT_PHY_CFG_INPUT_LPBK_LOCAL UINT32_C(0x1) + uint8_t queue_id1_pri_lvl; /* - * The HW will be configured with remote loopback such that - * port logic will send packets back out the transmitter that - * are received. + * Weight used to allocate remaining BW for this COS after + * servicing guaranteed bandwidths for all COS. */ - #define HWRM_PORT_PHY_CFG_INPUT_LPBK_REMOTE UINT32_C(0x2) + uint8_t queue_id1_bw_weight; + /* ID of CoS Queue 2. */ + uint8_t queue_id2; /* - * The HW will be configured with external loopback such that - * host data is sent on the trasmitter and based on the external - * loopback connection the data will be received without modification. + * Minimum BW allocated to CoS Queue. + * The HWRM will translate this value into byte counter and + * time interval used for this COS inside the device. */ - #define HWRM_PORT_PHY_CFG_INPUT_LPBK_EXTERNAL UINT32_C(0x3) - #define HWRM_PORT_PHY_CFG_INPUT_LPBK_LAST \ - HWRM_PORT_PHY_CFG_INPUT_LPBK_EXTERNAL + uint32_t queue_id2_min_bw; + /* The bandwidth value. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_SCALE_LAST \ + HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_LAST \ + HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_INVALID /* - * This value is used to configure the pause that will be - * used for force mode. + * Maximum BW allocated to CoS queue. + * The HWRM will translate this value into byte counter and + * time interval used for this COS inside the device. */ - uint8_t force_pause; + uint32_t queue_id2_max_bw; + /* The bandwidth value. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_SCALE_LAST \ + HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_LAST \ + HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_INVALID + /* Transmission Selection Algorithm (TSA) for CoS Queue. */ + uint8_t queue_id2_tsa_assign; + /* Strict Priority */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_TSA_ASSIGN_SP \ + UINT32_C(0x0) + /* Enhanced Transmission Selection */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_TSA_ASSIGN_ETS \ + UINT32_C(0x1) + /* reserved. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_TSA_ASSIGN_RESERVED_FIRST \ + UINT32_C(0x2) + /* reserved. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_TSA_ASSIGN_RESERVED_LAST \ + UINT32_C(0xff) /* - * When this bit is '1', Generation of tx pause messages - * is supported. Disabled otherwise. + * Priority level for strict priority. Valid only when the + * tsa_assign is 0 - Strict Priority (SP) + * 0..7 - Valid values. + * 8..255 - Reserved. */ - #define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAUSE_TX UINT32_C(0x1) + uint8_t queue_id2_pri_lvl; /* - * When this bit is '1', Reception of rx pause messages - * is supported. Disabled otherwise. + * Weight used to allocate remaining BW for this COS after + * servicing guaranteed bandwidths for all COS. */ - #define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAUSE_RX UINT32_C(0x2) - uint8_t unused_1; + uint8_t queue_id2_bw_weight; + /* ID of CoS Queue 3. */ + uint8_t queue_id3; /* - * This value controls the pre-emphasis to be used for the - * link. Driver should not set this value (use - * enable.preemphasis = 0) unless driver is sure of setting. - * Normally HWRM FW will determine proper pre-emphasis. + * Minimum BW allocated to CoS Queue. + * The HWRM will translate this value into byte counter and + * time interval used for this COS inside the device. */ - uint32_t preemphasis; + uint32_t queue_id3_min_bw; + /* The bandwidth value. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_SCALE_LAST \ + HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_LAST \ + HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_INVALID /* - * Setting for link speed mask that is used to - * advertise speeds during autonegotiation when EEE is enabled. - * This field is valid only when EEE is enabled. - * The speeds specified in this field shall be a subset of - * speeds specified in auto_link_speed_mask. - * If EEE is enabled,then at least one speed shall be provided - * in this mask. + * Maximum BW allocated to CoS queue. + * The HWRM will translate this value into byte counter and + * time interval used for this COS inside the device. */ - uint16_t eee_link_speed_mask; - /* Reserved */ - #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD1 \ + uint32_t queue_id3_max_bw; + /* The bandwidth value. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_SCALE_LAST \ + HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_LAST \ + HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_INVALID + /* Transmission Selection Algorithm (TSA) for CoS Queue. */ + uint8_t queue_id3_tsa_assign; + /* Strict Priority */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_TSA_ASSIGN_SP \ + UINT32_C(0x0) + /* Enhanced Transmission Selection */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_TSA_ASSIGN_ETS \ UINT32_C(0x1) - /* 100Mb link speed (Full-duplex) */ - #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_100MB \ + /* reserved. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_TSA_ASSIGN_RESERVED_FIRST \ UINT32_C(0x2) - /* Reserved */ - #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD2 \ - UINT32_C(0x4) - /* 1Gb link speed (Full-duplex) */ - #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_1GB \ - UINT32_C(0x8) - /* Reserved */ - #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD3 \ - UINT32_C(0x10) - /* Reserved */ - #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD4 \ - UINT32_C(0x20) - /* 10Gb link speed */ - #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_10GB \ - UINT32_C(0x40) - uint8_t unused_2[2]; - /* - * Reuested setting of TX LPI timer in microseconds. - * This field is valid only when EEE is enabled and TX LPI is - * enabled. - */ - uint32_t tx_lpi_timer; - #define HWRM_PORT_PHY_CFG_INPUT_TX_LPI_TIMER_MASK UINT32_C(0xffffff) - #define HWRM_PORT_PHY_CFG_INPUT_TX_LPI_TIMER_SFT 0 - uint32_t unused_3; -} __attribute__((packed)); - -/* hwrm_port_phy_cfg_output (size:128b/16B) */ -struct hwrm_port_phy_cfg_output { - /* The specific error status for the command. */ - uint16_t error_code; - /* The HWRM command request type. */ - uint16_t req_type; - /* The sequence ID from the original command. */ - uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; - uint8_t unused_0[7]; + /* reserved. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_TSA_ASSIGN_RESERVED_LAST \ + UINT32_C(0xff) /* - * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' - * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. + * Priority level for strict priority. Valid only when the + * tsa_assign is 0 - Strict Priority (SP) + * 0..7 - Valid values. + * 8..255 - Reserved. */ - uint8_t valid; -} __attribute__((packed)); - -/* hwrm_port_phy_cfg_cmd_err (size:64b/8B) */ -struct hwrm_port_phy_cfg_cmd_err { + uint8_t queue_id3_pri_lvl; /* - * command specific error codes that goes to - * the cmd_err field in Common HWRM Error Response. + * Weight used to allocate remaining BW for this COS after + * servicing guaranteed bandwidths for all COS. */ - uint8_t code; - /* Unknown error */ - #define HWRM_PORT_PHY_CFG_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0) - /* Unable to complete operation due to invalid speed */ - #define HWRM_PORT_PHY_CFG_CMD_ERR_CODE_ILLEGAL_SPEED UINT32_C(0x1) + uint8_t queue_id3_bw_weight; + /* ID of CoS Queue 4. */ + uint8_t queue_id4; /* - * retry the command since the phy is not ready. - * retry count is returned in opaque_0. - * This is only valid for the first command and - * this value will not change for successive calls. - * but if a 0 is returned at any time then this should - * be treated as an un recoverable failure, - * - * retry interval in milli seconds is returned in opaque_1. - * This specifies the time that user should wait before - * issuing the next port_phy_cfg command. + * Minimum BW allocated to CoS Queue. + * The HWRM will translate this value into byte counter and + * time interval used for this COS inside the device. */ - #define HWRM_PORT_PHY_CFG_CMD_ERR_CODE_RETRY UINT32_C(0x2) - #define HWRM_PORT_PHY_CFG_CMD_ERR_CODE_LAST \ - HWRM_PORT_PHY_CFG_CMD_ERR_CODE_RETRY - uint8_t unused_0[7]; -} __attribute__((packed)); - -/********************** - * hwrm_port_phy_qcfg * - **********************/ - - -/* hwrm_port_phy_qcfg_input (size:192b/24B) */ -struct hwrm_port_phy_qcfg_input { - /* The HWRM command request type. */ - uint16_t req_type; + uint32_t queue_id4_min_bw; + /* The bandwidth value. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_SCALE_LAST \ + HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_LAST \ + HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_INVALID /* - * The completion ring to send the completion event on. This should - * be the NQ ID returned from the `nq_alloc` HWRM command. + * Maximum BW allocated to CoS queue. + * The HWRM will translate this value into byte counter and + * time interval used for this COS inside the device. */ - uint16_t cmpl_ring; + uint32_t queue_id4_max_bw; + /* The bandwidth value. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_SCALE_LAST \ + HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_LAST \ + HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_INVALID + /* Transmission Selection Algorithm (TSA) for CoS Queue. */ + uint8_t queue_id4_tsa_assign; + /* Strict Priority */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_TSA_ASSIGN_SP \ + UINT32_C(0x0) + /* Enhanced Transmission Selection */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_TSA_ASSIGN_ETS \ + UINT32_C(0x1) + /* reserved. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_TSA_ASSIGN_RESERVED_FIRST \ + UINT32_C(0x2) + /* reserved. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_TSA_ASSIGN_RESERVED_LAST \ + UINT32_C(0xff) /* - * The sequence ID is used by the driver for tracking multiple - * commands. This ID is treated as opaque data by the firmware and - * the value is returned in the `hwrm_resp_hdr` upon completion. + * Priority level for strict priority. Valid only when the + * tsa_assign is 0 - Strict Priority (SP) + * 0..7 - Valid values. + * 8..255 - Reserved. */ - uint16_t seq_id; + uint8_t queue_id4_pri_lvl; /* - * The target ID of the command: - * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors - * * 0xFFFF - HWRM + * Weight used to allocate remaining BW for this COS after + * servicing guaranteed bandwidths for all COS. */ - uint16_t target_id; + uint8_t queue_id4_bw_weight; + /* ID of CoS Queue 5. */ + uint8_t queue_id5; /* - * A physical address pointer pointing to a host buffer that the - * command's response data will be written. This can be either a host - * physical address (HPA) or a guest physical address (GPA) and must - * point to a physically contiguous block of memory. + * Minimum BW allocated to CoS Queue. + * The HWRM will translate this value into byte counter and + * time interval used for this COS inside the device. */ - uint64_t resp_addr; - /* Port ID of port that is to be queried. */ - uint16_t port_id; - uint8_t unused_0[6]; -} __attribute__((packed)); - -/* hwrm_port_phy_qcfg_output (size:768b/96B) */ -struct hwrm_port_phy_qcfg_output { - /* The specific error status for the command. */ - uint16_t error_code; - /* The HWRM command request type. */ - uint16_t req_type; - /* The sequence ID from the original command. */ - uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; - /* This value indicates the current link status. */ - uint8_t link; - /* There is no link or cable detected. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_NO_LINK UINT32_C(0x0) - /* There is no link, but a cable has been detected. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SIGNAL UINT32_C(0x1) - /* There is a link. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_LINK UINT32_C(0x2) - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_LAST \ - HWRM_PORT_PHY_QCFG_OUTPUT_LINK_LINK - uint8_t unused_0; - /* This value indicates the current link speed of the connection. */ - uint16_t link_speed; - /* 100Mb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_100MB UINT32_C(0x1) - /* 1Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_1GB UINT32_C(0xa) - /* 2Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_2GB UINT32_C(0x14) - /* 25Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_2_5GB UINT32_C(0x19) - /* 10Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_10GB UINT32_C(0x64) - /* 20Mb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_20GB UINT32_C(0xc8) - /* 25Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_25GB UINT32_C(0xfa) - /* 40Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_40GB UINT32_C(0x190) - /* 50Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_50GB UINT32_C(0x1f4) - /* 100Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_100GB UINT32_C(0x3e8) - /* 10Mb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_10MB UINT32_C(0xffff) - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_LAST \ - HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_10MB + uint32_t queue_id5_min_bw; + /* The bandwidth value. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_SCALE_LAST \ + HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_LAST \ + HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_INVALID /* - * This value is indicates the duplex of the current - * configuration. + * Maximum BW allocated to CoS queue. + * The HWRM will translate this value into byte counter and + * time interval used for this COS inside the device. */ - uint8_t duplex_cfg; - /* Half Duplex connection. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_CFG_HALF UINT32_C(0x0) - /* Full duplex connection. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_CFG_FULL UINT32_C(0x1) - #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_CFG_LAST \ - HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_CFG_FULL - /* - * This value is used to indicate the current - * pause configuration. When autoneg is enabled, this value - * represents the autoneg results of pause configuration. + uint32_t queue_id5_max_bw; + /* The bandwidth value. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_SCALE_LAST \ + HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_LAST \ + HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_INVALID + /* Transmission Selection Algorithm (TSA) for CoS Queue. */ + uint8_t queue_id5_tsa_assign; + /* Strict Priority */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_TSA_ASSIGN_SP \ + UINT32_C(0x0) + /* Enhanced Transmission Selection */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_TSA_ASSIGN_ETS \ + UINT32_C(0x1) + /* reserved. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_TSA_ASSIGN_RESERVED_FIRST \ + UINT32_C(0x2) + /* reserved. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_TSA_ASSIGN_RESERVED_LAST \ + UINT32_C(0xff) + /* + * Priority level for strict priority. Valid only when the + * tsa_assign is 0 - Strict Priority (SP) + * 0..7 - Valid values. + * 8..255 - Reserved. */ - uint8_t pause; + uint8_t queue_id5_pri_lvl; /* - * When this bit is '1', Generation of tx pause messages - * is supported. Disabled otherwise. + * Weight used to allocate remaining BW for this COS after + * servicing guaranteed bandwidths for all COS. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_TX UINT32_C(0x1) + uint8_t queue_id5_bw_weight; + /* ID of CoS Queue 6. */ + uint8_t queue_id6; /* - * When this bit is '1', Reception of rx pause messages - * is supported. Disabled otherwise. + * Minimum BW allocated to CoS Queue. + * The HWRM will translate this value into byte counter and + * time interval used for this COS inside the device. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_RX UINT32_C(0x2) + uint32_t queue_id6_min_bw; + /* The bandwidth value. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_SCALE_LAST \ + HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_LAST \ + HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_INVALID /* - * The supported speeds for the port. This is a bit mask. - * For each speed that is supported, the corrresponding - * bit will be set to '1'. + * Maximum BW allocated to CoS queue. + * The HWRM will translate this value into byte counter and + * time interval used for this COS inside the device. */ - uint16_t support_speeds; - /* 100Mb link speed (Half-duplex) */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100MBHD \ + uint32_t queue_id6_max_bw; + /* The bandwidth value. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_SCALE_LAST \ + HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_LAST \ + HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_INVALID + /* Transmission Selection Algorithm (TSA) for CoS Queue. */ + uint8_t queue_id6_tsa_assign; + /* Strict Priority */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_TSA_ASSIGN_SP \ + UINT32_C(0x0) + /* Enhanced Transmission Selection */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_TSA_ASSIGN_ETS \ UINT32_C(0x1) - /* 100Mb link speed (Full-duplex) */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100MB \ + /* reserved. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_TSA_ASSIGN_RESERVED_FIRST \ UINT32_C(0x2) - /* 1Gb link speed (Half-duplex) */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_1GBHD \ - UINT32_C(0x4) - /* 1Gb link speed (Full-duplex) */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_1GB \ - UINT32_C(0x8) - /* 2Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_2GB \ - UINT32_C(0x10) - /* 25Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_2_5GB \ - UINT32_C(0x20) - /* 10Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10GB \ - UINT32_C(0x40) - /* 20Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_20GB \ - UINT32_C(0x80) - /* 25Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_25GB \ - UINT32_C(0x100) - /* 40Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_40GB \ - UINT32_C(0x200) - /* 50Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_50GB \ - UINT32_C(0x400) - /* 100Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100GB \ - UINT32_C(0x800) - /* 10Mb link speed (Half-duplex) */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10MBHD \ - UINT32_C(0x1000) - /* 10Mb link speed (Full-duplex) */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10MB \ - UINT32_C(0x2000) + /* reserved. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_TSA_ASSIGN_RESERVED_LAST \ + UINT32_C(0xff) /* - * Current setting of forced link speed. - * When the link speed is not being forced, this - * value shall be set to 0. + * Priority level for strict priority. Valid only when the + * tsa_assign is 0 - Strict Priority (SP) + * 0..7 - Valid values. + * 8..255 - Reserved. */ - uint16_t force_link_speed; - /* 100Mb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_100MB UINT32_C(0x1) - /* 1Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_1GB UINT32_C(0xa) - /* 2Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_2GB UINT32_C(0x14) - /* 25Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_2_5GB UINT32_C(0x19) - /* 10Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_10GB UINT32_C(0x64) - /* 20Mb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_20GB UINT32_C(0xc8) - /* 25Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_25GB UINT32_C(0xfa) - /* 40Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_40GB \ - UINT32_C(0x190) - /* 50Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_50GB \ - UINT32_C(0x1f4) - /* 100Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_100GB \ - UINT32_C(0x3e8) - /* 10Mb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_10MB \ - UINT32_C(0xffff) - #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_LAST \ - HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_10MB - /* Current setting of auto negotiation mode. */ - uint8_t auto_mode; - /* Disable autoneg or autoneg disabled. No speeds are selected. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_NONE UINT32_C(0x0) - /* Select all possible speeds for autoneg mode. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ALL_SPEEDS UINT32_C(0x1) + uint8_t queue_id6_pri_lvl; + /* + * Weight used to allocate remaining BW for this COS after + * servicing guaranteed bandwidths for all COS. + */ + uint8_t queue_id6_bw_weight; + /* ID of CoS Queue 7. */ + uint8_t queue_id7; + /* + * Minimum BW allocated to CoS Queue. + * The HWRM will translate this value into byte counter and + * time interval used for this COS inside the device. + */ + uint32_t queue_id7_min_bw; + /* The bandwidth value. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_SCALE_LAST \ + HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_LAST \ + HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_INVALID /* - * Select only the auto_link_speed speed for autoneg mode. This mode has - * been DEPRECATED. An HWRM client should not use this mode. + * Maximum BW allocated to CoS queue. + * The HWRM will translate this value into byte counter and + * time interval used for this COS inside the device. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ONE_SPEED UINT32_C(0x2) + uint32_t queue_id7_max_bw; + /* The bandwidth value. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_SCALE_LAST \ + HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_LAST \ + HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_INVALID + /* Transmission Selection Algorithm (TSA) for CoS Queue. */ + uint8_t queue_id7_tsa_assign; + /* Strict Priority */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_TSA_ASSIGN_SP \ + UINT32_C(0x0) + /* Enhanced Transmission Selection */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_TSA_ASSIGN_ETS \ + UINT32_C(0x1) + /* reserved. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_TSA_ASSIGN_RESERVED_FIRST \ + UINT32_C(0x2) + /* reserved. */ + #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_TSA_ASSIGN_RESERVED_LAST \ + UINT32_C(0xff) /* - * Select the auto_link_speed or any speed below that speed for autoneg. - * This mode has been DEPRECATED. An HWRM client should not use this mode. + * Priority level for strict priority. Valid only when the + * tsa_assign is 0 - Strict Priority (SP) + * 0..7 - Valid values. + * 8..255 - Reserved. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ONE_OR_BELOW UINT32_C(0x3) + uint8_t queue_id7_pri_lvl; /* - * Select the speeds based on the corresponding link speed mask value - * that is provided. + * Weight used to allocate remaining BW for this COS after + * servicing guaranteed bandwidths for all COS. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_SPEED_MASK UINT32_C(0x4) - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_LAST \ - HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_SPEED_MASK + uint8_t queue_id7_bw_weight; + uint8_t unused_2[4]; /* - * Current setting of pause autonegotiation. - * Move autoneg_pause flag here. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - uint8_t auto_pause; + uint8_t valid; +} __rte_packed; + +/************************* + * hwrm_queue_cos2bw_cfg * + *************************/ + + +/* hwrm_queue_cos2bw_cfg_input (size:1024b/128B) */ +struct hwrm_queue_cos2bw_cfg_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * When this bit is '1', Generation of tx pause messages - * has been requested. Disabled otherwise. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAUSE_TX \ - UINT32_C(0x1) + uint16_t cmpl_ring; /* - * When this bit is '1', Reception of rx pause messages - * has been requested. Disabled otherwise. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAUSE_RX \ - UINT32_C(0x2) + uint16_t seq_id; /* - * When set to 1, the advertisement of pause is enabled. - * - * # When the auto_mode is not set to none and this flag is - * set to 1, then the auto_pause bits on this port are being - * advertised and autoneg pause results are being interpreted. - * # When the auto_mode is not set to none and this - * flag is set to 0, the pause is forced as indicated in - * force_pause, and also advertised as auto_pause bits, but - * the autoneg results are not interpreted since the pause - * configuration is being forced. - * # When the auto_mode is set to none and this flag is set to - * 1, auto_pause bits should be ignored and should be set to 0. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAUSE_AUTONEG_PAUSE \ - UINT32_C(0x4) + uint16_t target_id; /* - * Current setting for auto_link_speed. This field is only - * valid when auto_mode is set to "one_speed" or "one_or_below". + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - uint16_t auto_link_speed; - /* 100Mb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_100MB UINT32_C(0x1) - /* 1Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_1GB UINT32_C(0xa) - /* 2Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_2GB UINT32_C(0x14) - /* 25Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_2_5GB UINT32_C(0x19) - /* 10Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_10GB UINT32_C(0x64) - /* 20Mb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_20GB UINT32_C(0xc8) - /* 25Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_25GB UINT32_C(0xfa) - /* 40Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_40GB UINT32_C(0x190) - /* 50Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_50GB UINT32_C(0x1f4) - /* 100Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_100GB UINT32_C(0x3e8) - /* 10Mb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_10MB \ - UINT32_C(0xffff) - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_LAST \ - HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_10MB + uint64_t resp_addr; + uint32_t flags; + uint32_t enables; /* - * Current setting for auto_link_speed_mask that is used to - * advertise speeds during autonegotiation. - * This field is only valid when auto_mode is set to "mask". - * The speeds specified in this field shall be a subset of - * supported speeds on this port. + * If this bit is set to 1, then all queue_id0 related + * parameters in this command are valid. */ - uint16_t auto_link_speed_mask; - /* 100Mb link speed (Half-duplex) */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100MBHD \ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID0_VALID \ UINT32_C(0x1) - /* 100Mb link speed (Full-duplex) */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100MB \ + /* + * If this bit is set to 1, then all queue_id1 related + * parameters in this command are valid. + */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID1_VALID \ UINT32_C(0x2) - /* 1Gb link speed (Half-duplex) */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_1GBHD \ + /* + * If this bit is set to 1, then all queue_id2 related + * parameters in this command are valid. + */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID2_VALID \ UINT32_C(0x4) - /* 1Gb link speed (Full-duplex) */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_1GB \ + /* + * If this bit is set to 1, then all queue_id3 related + * parameters in this command are valid. + */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID3_VALID \ UINT32_C(0x8) - /* 2Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_2GB \ - UINT32_C(0x10) - /* 25Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_2_5GB \ - UINT32_C(0x20) - /* 10Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10GB \ - UINT32_C(0x40) - /* 20Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_20GB \ - UINT32_C(0x80) - /* 25Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_25GB \ - UINT32_C(0x100) - /* 40Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_40GB \ - UINT32_C(0x200) - /* 50Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_50GB \ - UINT32_C(0x400) - /* 100Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100GB \ - UINT32_C(0x800) - /* 10Mb link speed (Half-duplex) */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10MBHD \ - UINT32_C(0x1000) - /* 10Mb link speed (Full-duplex) */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10MB \ - UINT32_C(0x2000) - /* Current setting for wirespeed. */ - uint8_t wirespeed; - /* Wirespeed feature is disabled. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_WIRESPEED_OFF UINT32_C(0x0) - /* Wirespeed feature is enabled. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_WIRESPEED_ON UINT32_C(0x1) - #define HWRM_PORT_PHY_QCFG_OUTPUT_WIRESPEED_LAST \ - HWRM_PORT_PHY_QCFG_OUTPUT_WIRESPEED_ON - /* Current setting for loopback. */ - uint8_t lpbk; - /* No loopback is selected. Normal operation. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_NONE UINT32_C(0x0) /* - * The HW will be configured with local loopback such that - * host data is sent back to the host without modification. + * If this bit is set to 1, then all queue_id4 related + * parameters in this command are valid. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_LOCAL UINT32_C(0x1) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID4_VALID \ + UINT32_C(0x10) /* - * The HW will be configured with remote loopback such that - * port logic will send packets back out the transmitter that - * are received. + * If this bit is set to 1, then all queue_id5 related + * parameters in this command are valid. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_REMOTE UINT32_C(0x2) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID5_VALID \ + UINT32_C(0x20) /* - * The HW will be configured with external loopback such that - * host data is sent on the trasmitter and based on the external - * loopback connection the data will be received without modification. + * If this bit is set to 1, then all queue_id6 related + * parameters in this command are valid. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_EXTERNAL UINT32_C(0x3) - #define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_LAST \ - HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_EXTERNAL + #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID6_VALID \ + UINT32_C(0x40) /* - * Current setting of forced pause. - * When the pause configuration is not being forced, then - * this value shall be set to 0. + * If this bit is set to 1, then all queue_id7 related + * parameters in this command are valid. */ - uint8_t force_pause; + #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID7_VALID \ + UINT32_C(0x80) /* - * When this bit is '1', Generation of tx pause messages - * is supported. Disabled otherwise. + * Port ID of port for which the table is being configured. + * The HWRM needs to check whether this function is allowed + * to configure TC BW assignment on this port. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_PAUSE_TX UINT32_C(0x1) + uint16_t port_id; + /* ID of CoS Queue 0. */ + uint8_t queue_id0; + uint8_t unused_0; /* - * When this bit is '1', Reception of rx pause messages - * is supported. Disabled otherwise. + * Minimum BW allocated to CoS Queue. + * The HWRM will translate this value into byte counter and + * time interval used for this COS inside the device. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_PAUSE_RX UINT32_C(0x2) + uint32_t queue_id0_min_bw; + /* The bandwidth value. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_SCALE_LAST \ + HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_LAST \ + HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_INVALID /* - * This value indicates the current status of the optics module on - * this port. + * Maximum BW allocated to CoS Queue. + * The HWRM will translate this value into byte counter and + * time interval used for this COS inside the device. */ - uint8_t module_status; - /* Module is inserted and accepted */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NONE \ + uint32_t queue_id0_max_bw; + /* The bandwidth value. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_SCALE_LAST \ + HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_LAST \ + HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_INVALID + /* Transmission Selection Algorithm (TSA) for CoS Queue. */ + uint8_t queue_id0_tsa_assign; + /* Strict Priority */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_TSA_ASSIGN_SP \ UINT32_C(0x0) - /* Module is rejected and transmit side Laser is disabled. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_DISABLETX \ + /* Enhanced Transmission Selection */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_TSA_ASSIGN_ETS \ UINT32_C(0x1) - /* Module mismatch warning. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_WARNINGMSG \ + /* reserved. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_TSA_ASSIGN_RESERVED_FIRST \ UINT32_C(0x2) - /* Module is rejected and powered down. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_PWRDOWN \ - UINT32_C(0x3) - /* Module is not inserted. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NOTINSERTED \ - UINT32_C(0x4) - /* Module status is not applicable. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NOTAPPLICABLE \ + /* reserved. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_TSA_ASSIGN_RESERVED_LAST \ UINT32_C(0xff) - #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_LAST \ - HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NOTAPPLICABLE - /* Current setting for preemphasis. */ - uint32_t preemphasis; - /* This field represents the major version of the PHY. */ - uint8_t phy_maj; - /* This field represents the minor version of the PHY. */ - uint8_t phy_min; - /* This field represents the build version of the PHY. */ - uint8_t phy_bld; - /* This value represents a PHY type. */ - uint8_t phy_type; - /* Unknown */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_UNKNOWN \ + /* + * Priority level for strict priority. Valid only when the + * tsa_assign is 0 - Strict Priority (SP) + * 0..7 - Valid values. + * 8..255 - Reserved. + */ + uint8_t queue_id0_pri_lvl; + /* + * Weight used to allocate remaining BW for this COS after + * servicing guaranteed bandwidths for all COS. + */ + uint8_t queue_id0_bw_weight; + /* ID of CoS Queue 1. */ + uint8_t queue_id1; + /* + * Minimum BW allocated to CoS Queue. + * The HWRM will translate this value into byte counter and + * time interval used for this COS inside the device. + */ + uint32_t queue_id1_min_bw; + /* The bandwidth value. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_SCALE_LAST \ + HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_LAST \ + HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_INVALID + /* + * Maximum BW allocated to CoS queue. + * The HWRM will translate this value into byte counter and + * time interval used for this COS inside the device. + */ + uint32_t queue_id1_max_bw; + /* The bandwidth value. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_SCALE_LAST \ + HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_LAST \ + HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_INVALID + /* Transmission Selection Algorithm (TSA) for CoS Queue. */ + uint8_t queue_id1_tsa_assign; + /* Strict Priority */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_TSA_ASSIGN_SP \ UINT32_C(0x0) - /* BASE-CR */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASECR \ - UINT32_C(0x1) - /* BASE-KR4 (Deprecated) */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR4 \ - UINT32_C(0x2) - /* BASE-LR */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASELR \ - UINT32_C(0x3) - /* BASE-SR */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASESR \ - UINT32_C(0x4) - /* BASE-KR2 (Deprecated) */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR2 \ - UINT32_C(0x5) - /* BASE-KX */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKX \ - UINT32_C(0x6) - /* BASE-KR */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR \ - UINT32_C(0x7) - /* BASE-T */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASET \ - UINT32_C(0x8) - /* EEE capable BASE-T */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASETE \ - UINT32_C(0x9) - /* SGMII connected external PHY */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_SGMIIEXTPHY \ - UINT32_C(0xa) - /* 25G_BASECR_CA_L */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASECR_CA_L \ - UINT32_C(0xb) - /* 25G_BASECR_CA_S */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASECR_CA_S \ - UINT32_C(0xc) - /* 25G_BASECR_CA_N */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASECR_CA_N \ - UINT32_C(0xd) - /* 25G_BASESR */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASESR \ - UINT32_C(0xe) - /* 100G_BASECR4 */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASECR4 \ - UINT32_C(0xf) - /* 100G_BASESR4 */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASESR4 \ - UINT32_C(0x10) - /* 100G_BASELR4 */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASELR4 \ - UINT32_C(0x11) - /* 100G_BASEER4 */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASEER4 \ - UINT32_C(0x12) - /* 100G_BASESR10 */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASESR10 \ - UINT32_C(0x13) - /* 40G_BASECR4 */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASECR4 \ - UINT32_C(0x14) - /* 40G_BASESR4 */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASESR4 \ - UINT32_C(0x15) - /* 40G_BASELR4 */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASELR4 \ - UINT32_C(0x16) - /* 40G_BASEER4 */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASEER4 \ - UINT32_C(0x17) - /* 40G_ACTIVE_CABLE */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_ACTIVE_CABLE \ - UINT32_C(0x18) - /* 1G_baseT */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_1G_BASET \ - UINT32_C(0x19) - /* 1G_baseSX */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_1G_BASESX \ - UINT32_C(0x1a) - /* 1G_baseCX */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_1G_BASECX \ - UINT32_C(0x1b) - #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_LAST \ - HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_1G_BASECX - /* This value represents a media type. */ - uint8_t media_type; - /* Unknown */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_UNKNOWN UINT32_C(0x0) - /* Twisted Pair */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_TP UINT32_C(0x1) - /* Direct Attached Copper */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_DAC UINT32_C(0x2) - /* Fiber */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_FIBRE UINT32_C(0x3) - #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_LAST \ - HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_FIBRE - /* This value represents a transceiver type. */ - uint8_t xcvr_pkg_type; - /* PHY and MAC are in the same package */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_XCVR_INTERNAL \ + /* Enhanced Transmission Selection */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_TSA_ASSIGN_ETS \ UINT32_C(0x1) - /* PHY and MAC are in different packages */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_XCVR_EXTERNAL \ + /* reserved. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_TSA_ASSIGN_RESERVED_FIRST \ UINT32_C(0x2) - #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_LAST \ - HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_XCVR_EXTERNAL - uint8_t eee_config_phy_addr; - /* This field represents PHY address. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_ADDR_MASK \ - UINT32_C(0x1f) - #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_ADDR_SFT 0 + /* reserved. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_TSA_ASSIGN_RESERVED_LAST \ + UINT32_C(0xff) /* - * This field represents flags related to EEE configuration. - * These EEE configuration flags are valid only when the - * auto_mode is not set to none (in other words autonegotiation - * is enabled). + * Priority level for strict priority. Valid only when the + * tsa_assign is 0 - Strict Priority (SP) + * 0..7 - Valid values. + * 8..255 - Reserved. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_MASK \ - UINT32_C(0xe0) - #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_SFT 5 + uint8_t queue_id1_pri_lvl; /* - * When set to 1, Energy Efficient Ethernet (EEE) mode is enabled. - * Speeds for autoneg with EEE mode enabled - * are based on eee_link_speed_mask. + * Weight used to allocate remaining BW for this COS after + * servicing guaranteed bandwidths for all COS. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_ENABLED \ - UINT32_C(0x20) + uint8_t queue_id1_bw_weight; + /* ID of CoS Queue 2. */ + uint8_t queue_id2; /* - * This flag is valid only when eee_enabled is set to 1. - * - * # If eee_enabled is set to 0, then EEE mode is disabled - * and this flag shall be ignored. - * # If eee_enabled is set to 1 and this flag is set to 1, - * then Energy Efficient Ethernet (EEE) mode is enabled - * and in use. - * # If eee_enabled is set to 1 and this flag is set to 0, - * then Energy Efficient Ethernet (EEE) mode is enabled - * but is currently not in use. + * Minimum BW allocated to CoS Queue. + * The HWRM will translate this value into byte counter and + * time interval used for this COS inside the device. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_ACTIVE \ - UINT32_C(0x40) + uint32_t queue_id2_min_bw; + /* The bandwidth value. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_SCALE_LAST \ + HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_LAST \ + HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_INVALID /* - * This flag is valid only when eee_enabled is set to 1. - * - * # If eee_enabled is set to 0, then EEE mode is disabled - * and this flag shall be ignored. - * # If eee_enabled is set to 1 and this flag is set to 1, - * then Energy Efficient Ethernet (EEE) mode is enabled - * and TX LPI is enabled. - * # If eee_enabled is set to 1 and this flag is set to 0, - * then Energy Efficient Ethernet (EEE) mode is enabled - * but TX LPI is disabled. + * Maximum BW allocated to CoS queue. + * The HWRM will translate this value into byte counter and + * time interval used for this COS inside the device. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_TX_LPI \ - UINT32_C(0x80) + uint32_t queue_id2_max_bw; + /* The bandwidth value. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_SCALE_LAST \ + HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_LAST \ + HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_INVALID + /* Transmission Selection Algorithm (TSA) for CoS Queue. */ + uint8_t queue_id2_tsa_assign; + /* Strict Priority */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_TSA_ASSIGN_SP \ + UINT32_C(0x0) + /* Enhanced Transmission Selection */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_TSA_ASSIGN_ETS \ + UINT32_C(0x1) + /* reserved. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_TSA_ASSIGN_RESERVED_FIRST \ + UINT32_C(0x2) + /* reserved. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_TSA_ASSIGN_RESERVED_LAST \ + UINT32_C(0xff) /* - * When set to 1, the parallel detection is used to determine - * the speed of the link partner. - * - * Parallel detection is used when a autonegotiation capable - * device is connected to a link parter that is not capable - * of autonegotiation. + * Priority level for strict priority. Valid only when the + * tsa_assign is 0 - Strict Priority (SP) + * 0..7 - Valid values. + * 8..255 - Reserved. */ - uint8_t parallel_detect; + uint8_t queue_id2_pri_lvl; /* - * When set to 1, the parallel detection is used to determine - * the speed of the link partner. - * - * Parallel detection is used when a autonegotiation capable - * device is connected to a link parter that is not capable - * of autonegotiation. + * Weight used to allocate remaining BW for this COS after + * servicing guaranteed bandwidths for all COS. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_PARALLEL_DETECT UINT32_C(0x1) + uint8_t queue_id2_bw_weight; + /* ID of CoS Queue 3. */ + uint8_t queue_id3; /* - * The advertised speeds for the port by the link partner. - * Each advertised speed will be set to '1'. + * Minimum BW allocated to CoS Queue. + * The HWRM will translate this value into byte counter and + * time interval used for this COS inside the device. */ - uint16_t link_partner_adv_speeds; - /* 100Mb link speed (Half-duplex) */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100MBHD \ - UINT32_C(0x1) - /* 100Mb link speed (Full-duplex) */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100MB \ - UINT32_C(0x2) - /* 1Gb link speed (Half-duplex) */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_1GBHD \ - UINT32_C(0x4) - /* 1Gb link speed (Full-duplex) */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_1GB \ - UINT32_C(0x8) - /* 2Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_2GB \ - UINT32_C(0x10) - /* 25Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_2_5GB \ - UINT32_C(0x20) - /* 10Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10GB \ - UINT32_C(0x40) - /* 20Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_20GB \ - UINT32_C(0x80) - /* 25Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_25GB \ - UINT32_C(0x100) - /* 40Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_40GB \ - UINT32_C(0x200) - /* 50Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_50GB \ - UINT32_C(0x400) - /* 100Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100GB \ - UINT32_C(0x800) - /* 10Mb link speed (Half-duplex) */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10MBHD \ - UINT32_C(0x1000) - /* 10Mb link speed (Full-duplex) */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10MB \ - UINT32_C(0x2000) + uint32_t queue_id3_min_bw; + /* The bandwidth value. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_SCALE_LAST \ + HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_LAST \ + HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_INVALID /* - * The advertised autoneg for the port by the link partner. - * This field is deprecated and should be set to 0. + * Maximum BW allocated to CoS queue. + * The HWRM will translate this value into byte counter and + * time interval used for this COS inside the device. */ - uint8_t link_partner_adv_auto_mode; - /* Disable autoneg or autoneg disabled. No speeds are selected. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_NONE \ + uint32_t queue_id3_max_bw; + /* The bandwidth value. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_SCALE_LAST \ + HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_LAST \ + HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_INVALID + /* Transmission Selection Algorithm (TSA) for CoS Queue. */ + uint8_t queue_id3_tsa_assign; + /* Strict Priority */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_TSA_ASSIGN_SP \ UINT32_C(0x0) - /* Select all possible speeds for autoneg mode. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ALL_SPEEDS \ + /* Enhanced Transmission Selection */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_TSA_ASSIGN_ETS \ UINT32_C(0x1) + /* reserved. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_TSA_ASSIGN_RESERVED_FIRST \ + UINT32_C(0x2) + /* reserved. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_TSA_ASSIGN_RESERVED_LAST \ + UINT32_C(0xff) /* - * Select only the auto_link_speed speed for autoneg mode. This mode has - * been DEPRECATED. An HWRM client should not use this mode. + * Priority level for strict priority. Valid only when the + * tsa_assign is 0 - Strict Priority (SP) + * 0..7 - Valid values. + * 8..255 - Reserved. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ONE_SPEED \ - UINT32_C(0x2) + uint8_t queue_id3_pri_lvl; /* - * Select the auto_link_speed or any speed below that speed for autoneg. - * This mode has been DEPRECATED. An HWRM client should not use this mode. + * Weight used to allocate remaining BW for this COS after + * servicing guaranteed bandwidths for all COS. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ONE_OR_BELOW \ - UINT32_C(0x3) + uint8_t queue_id3_bw_weight; + /* ID of CoS Queue 4. */ + uint8_t queue_id4; /* - * Select the speeds based on the corresponding link speed mask value - * that is provided. + * Minimum BW allocated to CoS Queue. + * The HWRM will translate this value into byte counter and + * time interval used for this COS inside the device. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_SPEED_MASK \ - UINT32_C(0x4) - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_LAST \ - HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_SPEED_MASK - /* The advertised pause settings on the port by the link partner. */ - uint8_t link_partner_adv_pause; + uint32_t queue_id4_min_bw; + /* The bandwidth value. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_SCALE_LAST \ + HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_LAST \ + HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_INVALID /* - * When this bit is '1', Generation of tx pause messages - * is supported. Disabled otherwise. + * Maximum BW allocated to CoS queue. + * The HWRM will translate this value into byte counter and + * time interval used for this COS inside the device. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_PAUSE_TX \ + uint32_t queue_id4_max_bw; + /* The bandwidth value. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_SCALE_LAST \ + HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_LAST \ + HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_INVALID + /* Transmission Selection Algorithm (TSA) for CoS Queue. */ + uint8_t queue_id4_tsa_assign; + /* Strict Priority */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_TSA_ASSIGN_SP \ + UINT32_C(0x0) + /* Enhanced Transmission Selection */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_TSA_ASSIGN_ETS \ UINT32_C(0x1) - /* - * When this bit is '1', Reception of rx pause messages - * is supported. Disabled otherwise. - */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_PAUSE_RX \ + /* reserved. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_TSA_ASSIGN_RESERVED_FIRST \ UINT32_C(0x2) + /* reserved. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_TSA_ASSIGN_RESERVED_LAST \ + UINT32_C(0xff) /* - * Current setting for link speed mask that is used to - * advertise speeds during autonegotiation when EEE is enabled. - * This field is valid only when eee_enabled flags is set to 1. - * The speeds specified in this field shall be a subset of - * speeds specified in auto_link_speed_mask. + * Priority level for strict priority. Valid only when the + * tsa_assign is 0 - Strict Priority (SP) + * 0..7 - Valid values. + * 8..255 - Reserved. */ - uint16_t adv_eee_link_speed_mask; - /* Reserved */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD1 \ - UINT32_C(0x1) - /* 100Mb link speed (Full-duplex) */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_100MB \ - UINT32_C(0x2) - /* Reserved */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD2 \ - UINT32_C(0x4) - /* 1Gb link speed (Full-duplex) */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_1GB \ - UINT32_C(0x8) - /* Reserved */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD3 \ - UINT32_C(0x10) - /* Reserved */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD4 \ - UINT32_C(0x20) - /* 10Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_10GB \ - UINT32_C(0x40) + uint8_t queue_id4_pri_lvl; /* - * Current setting for link speed mask that is advertised by - * the link partner when EEE is enabled. - * This field is valid only when eee_enabled flags is set to 1. + * Weight used to allocate remaining BW for this COS after + * servicing guaranteed bandwidths for all COS. */ - uint16_t link_partner_adv_eee_link_speed_mask; - /* Reserved */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD1 \ - UINT32_C(0x1) - /* 100Mb link speed (Full-duplex) */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_100MB \ - UINT32_C(0x2) - /* Reserved */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD2 \ - UINT32_C(0x4) - /* 1Gb link speed (Full-duplex) */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_1GB \ - UINT32_C(0x8) - /* Reserved */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD3 \ - UINT32_C(0x10) - /* Reserved */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD4 \ - UINT32_C(0x20) - /* 10Gb link speed */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_10GB \ - UINT32_C(0x40) - uint32_t xcvr_identifier_type_tx_lpi_timer; + uint8_t queue_id4_bw_weight; + /* ID of CoS Queue 5. */ + uint8_t queue_id5; /* - * Current setting of TX LPI timer in microseconds. - * This field is valid only when_eee_enabled flag is set to 1 - * and tx_lpi_enabled is set to 1. + * Minimum BW allocated to CoS Queue. + * The HWRM will translate this value into byte counter and + * time interval used for this COS inside the device. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_TX_LPI_TIMER_MASK \ - UINT32_C(0xffffff) - #define HWRM_PORT_PHY_QCFG_OUTPUT_TX_LPI_TIMER_SFT 0 - /* This value represents transceiver identifier type. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_MASK \ - UINT32_C(0xff000000) - #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_SFT 24 - /* Unknown */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_UNKNOWN \ - (UINT32_C(0x0) << 24) - /* SFP/SFP+/SFP28 */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_SFP \ - (UINT32_C(0x3) << 24) - /* QSFP+ */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP \ - (UINT32_C(0xc) << 24) - /* QSFP+ */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFPPLUS \ - (UINT32_C(0xd) << 24) - /* QSFP28 */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP28 \ - (UINT32_C(0x11) << 24) - #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_LAST \ - HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP28 + uint32_t queue_id5_min_bw; + /* The bandwidth value. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_SCALE_LAST \ + HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_LAST \ + HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_INVALID /* - * This value represents the current configuration of - * Forward Error Correction (FEC) on the port. + * Maximum BW allocated to CoS queue. + * The HWRM will translate this value into byte counter and + * time interval used for this COS inside the device. */ - uint16_t fec_cfg; + uint32_t queue_id5_max_bw; + /* The bandwidth value. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_SCALE_LAST \ + HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_LAST \ + HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_INVALID + /* Transmission Selection Algorithm (TSA) for CoS Queue. */ + uint8_t queue_id5_tsa_assign; + /* Strict Priority */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_TSA_ASSIGN_SP \ + UINT32_C(0x0) + /* Enhanced Transmission Selection */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_TSA_ASSIGN_ETS \ + UINT32_C(0x1) + /* reserved. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_TSA_ASSIGN_RESERVED_FIRST \ + UINT32_C(0x2) + /* reserved. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_TSA_ASSIGN_RESERVED_LAST \ + UINT32_C(0xff) /* - * When set to 1, then FEC is not supported on this port. If this flag - * is set to 1, then all other FEC configuration flags shall be ignored. - * When set to 0, then FEC is supported as indicated by other - * configuration flags. - * If no cable is attached and the HWRM does not yet know the FEC - * capability, then the HWRM shall set this flag to 1 when reporting - * FEC capability. + * Priority level for strict priority. Valid only when the + * tsa_assign is 0 - Strict Priority (SP) + * 0..7 - Valid values. + * 8..255 - Reserved. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_NONE_SUPPORTED \ - UINT32_C(0x1) + uint8_t queue_id5_pri_lvl; /* - * When set to 1, then FEC autonegotiation is supported on this port. - * When set to 0, then FEC autonegotiation is not supported on this port. + * Weight used to allocate remaining BW for this COS after + * servicing guaranteed bandwidths for all COS. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_AUTONEG_SUPPORTED \ - UINT32_C(0x2) + uint8_t queue_id5_bw_weight; + /* ID of CoS Queue 6. */ + uint8_t queue_id6; /* - * When set to 1, then FEC autonegotiation is enabled on this port. - * When set to 0, then FEC autonegotiation is disabled if supported. - * This flag should be ignored if FEC autonegotiation is not supported on this port. + * Minimum BW allocated to CoS Queue. + * The HWRM will translate this value into byte counter and + * time interval used for this COS inside the device. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_AUTONEG_ENABLED \ - UINT32_C(0x4) + uint32_t queue_id6_min_bw; + /* The bandwidth value. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_SCALE_LAST \ + HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_LAST \ + HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_INVALID /* - * When set to 1, then FEC CLAUSE 74 (Fire Code) is supported on this port. - * When set to 0, then FEC CLAUSE 74 (Fire Code) is not supported on this port. + * Maximum BW allocated to CoS queue. + * The HWRM will translate this value into byte counter and + * time interval used for this COS inside the device. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE74_SUPPORTED \ - UINT32_C(0x8) + uint32_t queue_id6_max_bw; + /* The bandwidth value. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_SCALE_LAST \ + HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_LAST \ + HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_INVALID + /* Transmission Selection Algorithm (TSA) for CoS Queue. */ + uint8_t queue_id6_tsa_assign; + /* Strict Priority */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_TSA_ASSIGN_SP \ + UINT32_C(0x0) + /* Enhanced Transmission Selection */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_TSA_ASSIGN_ETS \ + UINT32_C(0x1) + /* reserved. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_TSA_ASSIGN_RESERVED_FIRST \ + UINT32_C(0x2) + /* reserved. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_TSA_ASSIGN_RESERVED_LAST \ + UINT32_C(0xff) /* - * When set to 1, then FEC CLAUSE 74 (Fire Code) is enabled on this port. - * When set to 0, then FEC CLAUSE 74 (Fire Code) is disabled if supported. - * This flag should be ignored if FEC CLAUSE 74 is not supported on this port. + * Priority level for strict priority. Valid only when the + * tsa_assign is 0 - Strict Priority (SP) + * 0..7 - Valid values. + * 8..255 - Reserved. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE74_ENABLED \ - UINT32_C(0x10) + uint8_t queue_id6_pri_lvl; /* - * When set to 1, then FEC CLAUSE 91 (Reed Solomon) is supported on this port. - * When set to 0, then FEC CLAUSE 91 (Reed Solomon) is not supported on this port. + * Weight used to allocate remaining BW for this COS after + * servicing guaranteed bandwidths for all COS. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_SUPPORTED \ - UINT32_C(0x20) + uint8_t queue_id6_bw_weight; + /* ID of CoS Queue 7. */ + uint8_t queue_id7; /* - * When set to 1, then FEC CLAUSE 91 (Reed Solomon) is enabled on this port. - * When set to 0, then FEC CLAUSE 91 (Reed Solomon) is disabled if supported. - * This flag should be ignored if FEC CLAUSE 91 is not supported on this port. + * Minimum BW allocated to CoS Queue. + * The HWRM will translate this value into byte counter and + * time interval used for this COS inside the device. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_ENABLED \ - UINT32_C(0x40) + uint32_t queue_id7_min_bw; + /* The bandwidth value. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE_LAST \ + HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_LAST \ + HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_INVALID /* - * This value is indicates the duplex of the current - * connection state. + * Maximum BW allocated to CoS queue. + * The HWRM will translate this value into byte counter and + * time interval used for this COS inside the device. */ - uint8_t duplex_state; - /* Half Duplex connection. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_STATE_HALF UINT32_C(0x0) - /* Full duplex connection. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_STATE_FULL UINT32_C(0x1) - #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_STATE_LAST \ - HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_STATE_FULL - /* Option flags fields. */ - uint8_t option_flags; - /* When this bit is '1', Media auto detect is enabled. */ - #define HWRM_PORT_PHY_QCFG_OUTPUT_OPTION_FLAGS_MEDIA_AUTO_DETECT \ + uint32_t queue_id7_max_bw; + /* The bandwidth value. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE_LAST \ + HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_LAST \ + HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_INVALID + /* Transmission Selection Algorithm (TSA) for CoS Queue. */ + uint8_t queue_id7_tsa_assign; + /* Strict Priority */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_SP \ + UINT32_C(0x0) + /* Enhanced Transmission Selection */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_ETS \ UINT32_C(0x1) + /* reserved. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_RESERVED_FIRST \ + UINT32_C(0x2) + /* reserved. */ + #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_RESERVED_LAST \ + UINT32_C(0xff) /* - * Up to 16 bytes of null padded ASCII string representing - * PHY vendor. - * If the string is set to null, then the vendor name is not - * available. + * Priority level for strict priority. Valid only when the + * tsa_assign is 0 - Strict Priority (SP) + * 0..7 - Valid values. + * 8..255 - Reserved. */ - char phy_vendor_name[16]; + uint8_t queue_id7_pri_lvl; /* - * Up to 16 bytes of null padded ASCII string that - * identifies vendor specific part number of the PHY. - * If the string is set to null, then the vendor specific - * part number is not available. + * Weight used to allocate remaining BW for this COS after + * servicing guaranteed bandwidths for all COS. */ - char phy_vendor_partnumber[16]; - uint8_t unused_2[7]; + uint8_t queue_id7_bw_weight; + uint8_t unused_1[5]; +} __rte_packed; + +/* hwrm_queue_cos2bw_cfg_output (size:128b/16B) */ +struct hwrm_queue_cos2bw_cfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/********************* - * hwrm_port_mac_cfg * - *********************/ +/************************* + * hwrm_queue_dscp_qcaps * + *************************/ -/* hwrm_port_mac_cfg_input (size:320b/40B) */ -struct hwrm_port_mac_cfg_input { +/* hwrm_queue_dscp_qcaps_input (size:192b/24B) */ +struct hwrm_queue_dscp_qcaps_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -11962,7 +24553,8 @@ struct hwrm_port_mac_cfg_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -11974,354 +24566,260 @@ struct hwrm_port_mac_cfg_input { */ uint64_t resp_addr; /* - * In this field, there are a number of CoS mappings related flags - * that are used to configure CoS mappings and their corresponding - * priorities in the hardware. - * For the priorities of CoS mappings, the HWRM uses the following - * priority order (high to low) by default: - * # vlan pri - * # ip_dscp - * # tunnel_vlan_pri - * # default cos - * - * A subset of CoS mappings can be enabled. - * If a priority is not specified for an enabled CoS mapping, the - * priority will be assigned in the above order for the enabled CoS - * mappings. For example, if vlan_pri and ip_dscp CoS mappings are - * enabled and their priorities are not specified, the following - * priority order (high to low) will be used by the HWRM: - * # vlan_pri - * # ip_dscp - * # default cos - * - * vlan_pri CoS mapping together with default CoS with lower priority - * are enabled by default by the HWRM. - */ - uint32_t flags; - /* - * When this bit is '1', this command will configure - * the MAC to match the current link state of the PHY. - * If the link is not established on the PHY, then this - * bit has no effect. - */ - #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_MATCH_LINK \ - UINT32_C(0x1) - /* - * When this bit is set to '1', the inner VLAN PRI to CoS mapping - * is requested to be enabled. - */ - #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_VLAN_PRI2COS_ENABLE \ - UINT32_C(0x2) - /* - * When this bit is set to '1', tunnel VLAN PRI field to - * CoS mapping is requested to be enabled. - */ - #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_TUNNEL_PRI2COS_ENABLE \ - UINT32_C(0x4) - /* - * When this bit is set to '1', the IP DSCP to CoS mapping is - * requested to be enabled. - */ - #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_IP_DSCP2COS_ENABLE \ - UINT32_C(0x8) - /* - * When this bit is '1', the HWRM is requested to - * enable timestamp capture capability on the receive side - * of this port. - */ - #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_PTP_RX_TS_CAPTURE_ENABLE \ - UINT32_C(0x10) - /* - * When this bit is '1', the HWRM is requested to - * disable timestamp capture capability on the receive side - * of this port. - */ - #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_PTP_RX_TS_CAPTURE_DISABLE \ - UINT32_C(0x20) - /* - * When this bit is '1', the HWRM is requested to - * enable timestamp capture capability on the transmit side - * of this port. - */ - #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_PTP_TX_TS_CAPTURE_ENABLE \ - UINT32_C(0x40) - /* - * When this bit is '1', the HWRM is requested to - * disable timestamp capture capability on the transmit side - * of this port. - */ - #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_PTP_TX_TS_CAPTURE_DISABLE \ - UINT32_C(0x80) - /* - * When this bit is '1', the Out-Of-Box WoL is requested to - * be enabled on this port. - */ - #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_OOB_WOL_ENABLE \ - UINT32_C(0x100) - /* - * When this bit is '1', the the Out-Of-Box WoL is requested to - * be disabled on this port. - */ - #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_OOB_WOL_DISABLE \ - UINT32_C(0x200) - /* - * When this bit is set to '1', the inner VLAN PRI to CoS mapping - * is requested to be disabled. - */ - #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_VLAN_PRI2COS_DISABLE \ - UINT32_C(0x400) - /* - * When this bit is set to '1', tunnel VLAN PRI field to - * CoS mapping is requested to be disabled. - */ - #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_TUNNEL_PRI2COS_DISABLE \ - UINT32_C(0x800) - /* - * When this bit is set to '1', the IP DSCP to CoS mapping is - * requested to be disabled. - */ - #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_IP_DSCP2COS_DISABLE \ - UINT32_C(0x1000) - uint32_t enables; - /* - * This bit must be '1' for the ipg field to be - * configured. + * Port ID of port for which the table is being configured. + * The HWRM needs to check whether this function is allowed + * to configure pri2cos mapping on this port. */ - #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_IPG \ - UINT32_C(0x1) + uint8_t port_id; + uint8_t unused_0[7]; +} __rte_packed; + +/* hwrm_queue_dscp_qcaps_output (size:128b/16B) */ +struct hwrm_queue_dscp_qcaps_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* The number of bits provided by the hardware for the DSCP value. */ + uint8_t num_dscp_bits; + uint8_t unused_0; + /* Max number of DSCP-MASK-PRI entries supported. */ + uint16_t max_entries; + uint8_t unused_1[3]; /* - * This bit must be '1' for the lpbk field to be - * configured. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_LPBK \ - UINT32_C(0x2) + uint8_t valid; +} __rte_packed; + +/**************************** + * hwrm_queue_dscp2pri_qcfg * + ****************************/ + + +/* hwrm_queue_dscp2pri_qcfg_input (size:256b/32B) */ +struct hwrm_queue_dscp2pri_qcfg_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * This bit must be '1' for the vlan_pri2cos_map_pri field to be - * configured. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_VLAN_PRI2COS_MAP_PRI \ - UINT32_C(0x4) + uint16_t cmpl_ring; /* - * This bit must be '1' for the tunnel_pri2cos_map_pri field to be - * configured. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_TUNNEL_PRI2COS_MAP_PRI \ - UINT32_C(0x10) + uint16_t seq_id; /* - * This bit must be '1' for the dscp2cos_map_pri field to be - * configured. - */ - #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_DSCP2COS_MAP_PRI \ - UINT32_C(0x20) + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; /* - * This bit must be '1' for the rx_ts_capture_ptp_msg_type field to be - * configured. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_RX_TS_CAPTURE_PTP_MSG_TYPE \ - UINT32_C(0x40) + uint64_t resp_addr; /* - * This bit must be '1' for the tx_ts_capture_ptp_msg_type field to be - * configured. + * This is the host address where the 24-bits DSCP-MASK-PRI + * tuple(s) will be copied to. */ - #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_TX_TS_CAPTURE_PTP_MSG_TYPE \ - UINT32_C(0x80) + uint64_t dest_data_addr; /* - * This bit must be '1' for the cos_field_cfg field to be - * configured. + * Port ID of port for which the table is being configured. + * The HWRM needs to check whether this function is allowed + * to configure pri2cos mapping on this port. */ - #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_COS_FIELD_CFG \ - UINT32_C(0x100) - /* Port ID of port that is to be configured. */ - uint16_t port_id; + uint8_t port_id; + uint8_t unused_0; + /* Size of the buffer pointed to by dest_data_addr. */ + uint16_t dest_data_buffer_size; + uint8_t unused_1[4]; +} __rte_packed; + +/* hwrm_queue_dscp2pri_qcfg_output (size:128b/16B) */ +struct hwrm_queue_dscp2pri_qcfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; /* - * This value is used to configure the minimum IPG that will - * be sent between packets by this port. + * A count of the number of DSCP-MASK-PRI tuple(s) pointed to + * by the dest_data_addr. */ - uint8_t ipg; - /* This value controls the loopback setting for the MAC. */ - uint8_t lpbk; - /* No loopback is selected. Normal operation. */ - #define HWRM_PORT_MAC_CFG_INPUT_LPBK_NONE UINT32_C(0x0) + uint16_t entry_cnt; /* - * The HW will be configured with local loopback such that - * host data is sent back to the host without modification. + * This is the default PRI which un-initialized DSCP values are + * mapped to. */ - #define HWRM_PORT_MAC_CFG_INPUT_LPBK_LOCAL UINT32_C(0x1) + uint8_t default_pri; + uint8_t unused_0[4]; /* - * The HW will be configured with remote loopback such that - * port logic will send packets back out the transmitter that - * are received. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - #define HWRM_PORT_MAC_CFG_INPUT_LPBK_REMOTE UINT32_C(0x2) - #define HWRM_PORT_MAC_CFG_INPUT_LPBK_LAST \ - HWRM_PORT_MAC_CFG_INPUT_LPBK_REMOTE + uint8_t valid; +} __rte_packed; + +/*************************** + * hwrm_queue_dscp2pri_cfg * + ***************************/ + + +/* hwrm_queue_dscp2pri_cfg_input (size:320b/40B) */ +struct hwrm_queue_dscp2pri_cfg_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * This value controls the priority setting of VLAN PRI to CoS - * mapping based on VLAN Tags of inner packet headers of - * tunneled packets or packet headers of non-tunneled packets. - * - * # Each XXX_pri variable shall have a unique priority value - * when it is being specified. - * # When comparing priorities of mappings, higher value - * indicates higher priority. - * For example, a value of 0-3 is returned where 0 is being - * the lowest priority and 3 is being the highest priority. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - uint8_t vlan_pri2cos_map_pri; - /* Reserved field. */ - uint8_t reserved1; + uint16_t cmpl_ring; /* - * This value controls the priority setting of VLAN PRI to CoS - * mapping based on VLAN Tags of tunneled header. - * This mapping only applies when tunneled headers - * are present. - * - * # Each XXX_pri variable shall have a unique priority value - * when it is being specified. - * # When comparing priorities of mappings, higher value - * indicates higher priority. - * For example, a value of 0-3 is returned where 0 is being - * the lowest priority and 3 is being the highest priority. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - uint8_t tunnel_pri2cos_map_pri; + uint16_t seq_id; /* - * This value controls the priority setting of IP DSCP to CoS - * mapping based on inner IP header of tunneled packets or - * IP header of non-tunneled packets. - * - * # Each XXX_pri variable shall have a unique priority value - * when it is being specified. - * # When comparing priorities of mappings, higher value - * indicates higher priority. - * For example, a value of 0-3 is returned where 0 is being - * the lowest priority and 3 is being the highest priority. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - uint8_t dscp2pri_map_pri; + uint16_t target_id; /* - * This is a 16-bit bit mask that is used to request a - * specific configuration of time stamp capture of PTP messages - * on the receive side of this port. - * This field shall be ignored if the ptp_rx_ts_capture_enable - * flag is not set in this command. - * Otherwise, if bit 'i' is set, then the HWRM is being - * requested to configure the receive side of the port to - * capture the time stamp of every received PTP message - * with messageType field value set to i. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - uint16_t rx_ts_capture_ptp_msg_type; + uint64_t resp_addr; /* - * This is a 16-bit bit mask that is used to request a - * specific configuration of time stamp capture of PTP messages - * on the transmit side of this port. - * This field shall be ignored if the ptp_tx_ts_capture_enable - * flag is not set in this command. - * Otherwise, if bit 'i' is set, then the HWRM is being - * requested to configure the transmit sied of the port to - * capture the time stamp of every transmitted PTP message - * with messageType field value set to i. + * This is the host address where the 24-bits DSCP-MASK-PRI tuple + * will be copied from. */ - uint16_t tx_ts_capture_ptp_msg_type; - /* Configuration of CoS fields. */ - uint8_t cos_field_cfg; - /* Reserved */ - #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_RSVD1 \ + uint64_t src_data_addr; + uint32_t flags; + /* use_hw_default_pri is 1 b */ + #define HWRM_QUEUE_DSCP2PRI_CFG_INPUT_FLAGS_USE_HW_DEFAULT_PRI \ UINT32_C(0x1) + uint32_t enables; /* - * This field is used to specify selection of VLAN PRI value - * based on whether one or two VLAN Tags are present in - * the inner packet headers of tunneled packets or - * non-tunneled packets. - * This field is valid only if inner VLAN PRI to CoS mapping - * is enabled. - * If VLAN PRI to CoS mapping is not enabled, then this - * field shall be ignored. + * This bit must be '1' for the default_pri field to be + * configured. */ - #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_MASK \ - UINT32_C(0x6) - #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_SFT \ - 1 + #define HWRM_QUEUE_DSCP2PRI_CFG_INPUT_ENABLES_DEFAULT_PRI \ + UINT32_C(0x1) /* - * Select inner VLAN PRI when 1 or 2 VLAN Tags are - * present in the inner packet headers + * Port ID of port for which the table is being configured. + * The HWRM needs to check whether this function is allowed + * to configure pri2cos mapping on this port. */ - #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_INNERMOST \ - (UINT32_C(0x0) << 1) + uint8_t port_id; /* - * Select outer VLAN Tag PRI when 2 VLAN Tags are - * present in the inner packet headers. - * No VLAN PRI shall be selected for this configuration - * if only one VLAN Tag is present in the inner - * packet headers. + * This is the default PRI which un-initialized DSCP values will be + * mapped to. */ - #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_OUTER \ - (UINT32_C(0x1) << 1) + uint8_t default_pri; /* - * Select outermost VLAN PRI when 1 or 2 VLAN Tags - * are present in the inner packet headers + * A count of the number of DSCP-MASK-PRI tuple(s) in the data pointed + * to by src_data_addr. */ - #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_OUTERMOST \ - (UINT32_C(0x2) << 1) - /* Unspecified */ - #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_UNSPECIFIED \ - (UINT32_C(0x3) << 1) - #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_LAST \ - HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_UNSPECIFIED + uint16_t entry_cnt; + uint8_t unused_0[4]; +} __rte_packed; + +/* hwrm_queue_dscp2pri_cfg_output (size:128b/16B) */ +struct hwrm_queue_dscp2pri_cfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; /* - * This field is used to specify selection of tunnel VLAN - * PRI value based on whether one or two VLAN Tags are - * present in tunnel headers. - * This field is valid only if tunnel VLAN PRI to CoS mapping - * is enabled. - * If tunnel VLAN PRI to CoS mapping is not enabled, then this - * field shall be ignored. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_MASK \ - UINT32_C(0x18) - #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_SFT \ - 3 + uint8_t valid; +} __rte_packed; + +/************************* + * hwrm_queue_mpls_qcaps * + *************************/ + + +/* hwrm_queue_mpls_qcaps_input (size:192b/24B) */ +struct hwrm_queue_mpls_qcaps_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * Select inner VLAN PRI when 1 or 2 VLAN Tags are - * present in the tunnel packet headers + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_INNERMOST \ - (UINT32_C(0x0) << 3) + uint16_t cmpl_ring; /* - * Select outer VLAN Tag PRI when 2 VLAN Tags are - * present in the tunnel packet headers. - * No tunnel VLAN PRI shall be selected for this - * configuration if only one VLAN Tag is present in - * the tunnel packet headers. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_OUTER \ - (UINT32_C(0x1) << 3) + uint16_t seq_id; /* - * Select outermost VLAN PRI when 1 or 2 VLAN Tags - * are present in the tunnel packet headers + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_OUTERMOST \ - (UINT32_C(0x2) << 3) - /* Unspecified */ - #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_UNSPECIFIED \ - (UINT32_C(0x3) << 3) - #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_LAST \ - HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_UNSPECIFIED + uint16_t target_id; /* - * This field shall be used to provide default CoS value - * that has been configured on this port. - * This field is valid only if default CoS mapping - * is enabled. - * If default CoS mapping is not enabled, then this - * field shall be ignored. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_DEFAULT_COS_MASK \ - UINT32_C(0xe0) - #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_DEFAULT_COS_SFT \ - 5 - uint8_t unused_0[3]; -} __attribute__((packed)); + uint64_t resp_addr; + /* + * Port ID of port for which the table is being configured. + * The HWRM needs to check whether this function is allowed + * to configure MPLS TC(EXP) to pri mapping on this port. + */ + uint8_t port_id; + uint8_t unused_0[7]; +} __rte_packed; -/* hwrm_port_mac_cfg_output (size:128b/16B) */ -struct hwrm_port_mac_cfg_output { +/* hwrm_queue_mpls_qcaps_output (size:128b/16B) */ +struct hwrm_queue_mpls_qcaps_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -12331,56 +24829,41 @@ struct hwrm_port_mac_cfg_output { /* The length of the response data in number of bytes. */ uint16_t resp_len; /* - * This is the configured maximum length of Ethernet packet - * payload that is allowed to be received on the port. - * This value does not include the number of bytes used by - * Ethernet header and trailer (CRC). - */ - uint16_t mru; - /* - * This is the configured maximum length of Ethernet packet - * payload that is allowed to be transmitted on the port. - * This value does not include the number of bytes used by - * Ethernet header and trailer (CRC). - */ - uint16_t mtu; - /* Current configuration of the IPG value. */ - uint8_t ipg; - /* Current value of the loopback value. */ - uint8_t lpbk; - /* No loopback is selected. Normal operation. */ - #define HWRM_PORT_MAC_CFG_OUTPUT_LPBK_NONE UINT32_C(0x0) - /* - * The HW will be configured with local loopback such that - * host data is sent back to the host without modification. + * Bitmask indicating which queues can be configured by the + * hwrm_queue_mplstc2pri_cfg command. + * + * Each bit represents a specific pri where bit 0 represents + * pri 0 and bit 7 represents pri 7. + * # A value of 0 indicates that the pri is not configurable + * by the hwrm_queue_mplstc2pri_cfg command. + * # A value of 1 indicates that the pri is configurable. + * # A hwrm_queue_mplstc2pri_cfg command shall return error when + * trying to configure a pri that is not configurable. */ - #define HWRM_PORT_MAC_CFG_OUTPUT_LPBK_LOCAL UINT32_C(0x1) + uint8_t queue_mplstc2pri_cfg_allowed; /* - * The HW will be configured with remote loopback such that - * port logic will send packets back out the transmitter that - * are received. + * This is the default PRI which un-initialized MPLS values will be + * mapped to. */ - #define HWRM_PORT_MAC_CFG_OUTPUT_LPBK_REMOTE UINT32_C(0x2) - #define HWRM_PORT_MAC_CFG_OUTPUT_LPBK_LAST \ - HWRM_PORT_MAC_CFG_OUTPUT_LPBK_REMOTE - uint8_t unused_0; + uint8_t hw_default_pri; + uint8_t unused_0[5]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/********************** - * hwrm_port_mac_qcfg * - **********************/ +/****************************** + * hwrm_queue_mplstc2pri_qcfg * + ******************************/ -/* hwrm_port_mac_qcfg_input (size:192b/24B) */ -struct hwrm_port_mac_qcfg_input { +/* hwrm_queue_mplstc2pri_qcfg_input (size:192b/24B) */ +struct hwrm_queue_mplstc2pri_qcfg_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -12397,7 +24880,8 @@ struct hwrm_port_mac_qcfg_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -12408,13 +24892,17 @@ struct hwrm_port_mac_qcfg_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* Port ID of port that is to be configured. */ - uint16_t port_id; - uint8_t unused_0[6]; -} __attribute__((packed)); + /* + * Port ID of port for which the table is being configured. + * The HWRM needs to check whether this function is allowed + * to configure MPLS TC(EXP) to pri mapping on this port. + */ + uint8_t port_id; + uint8_t unused_0[7]; +} __rte_packed; -/* hwrm_port_mac_qcfg_output (size:192b/24B) */ -struct hwrm_port_mac_qcfg_output { +/* hwrm_queue_mplstc2pri_qcfg_output (size:192b/24B) */ +struct hwrm_queue_mplstc2pri_qcfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -12424,235 +24912,344 @@ struct hwrm_port_mac_qcfg_output { /* The length of the response data in number of bytes. */ uint16_t resp_len; /* - * This is the configured maximum length of Ethernet packet - * payload that is allowed to be received on the port. - * This value does not include the number of bytes used by the - * Ethernet header and trailer (CRC). + * pri assigned to MPLS TC(EXP) 0. This value can only be changed + * before traffic has started. + * A value of 0xff indicates that no pri is assigned to the + * MPLS TC(EXP) 0. */ - uint16_t mru; + uint8_t tc0_pri_queue_id; /* - * This is the configured maximum length of Ethernet packet - * payload that is allowed to be transmitted on the port. - * This value does not include the number of bytes used by the - * Ethernet header and trailer (CRC). + * pri assigned to MPLS TC(EXP) 1. This value can only be changed + * before traffic has started. + * A value of 0xff indicates that no pri is assigned to the + * MPLS TC(EXP) 1. */ - uint16_t mtu; + uint8_t tc1_pri_queue_id; /* - * The minimum IPG that will - * be sent between packets by this port. + * pri assigned to MPLS TC(EXP) 2. This value can only be changed + * before traffic has started. + * A value of 0xff indicates that no pri is assigned to the + * MPLS TC(EXP) 2. */ - uint8_t ipg; - /* The loopback setting for the MAC. */ - uint8_t lpbk; - /* No loopback is selected. Normal operation. */ - #define HWRM_PORT_MAC_QCFG_OUTPUT_LPBK_NONE UINT32_C(0x0) + uint8_t tc2_pri_queue_id; /* - * The HW will be configured with local loopback such that - * host data is sent back to the host without modification. + * pri assigned to MPLS TC(EXP) 3. This value can only be changed + * before traffic has started. + * A value of 0xff indicates that no pri is assigned to the + * MPLS TC(EXP) 3. */ - #define HWRM_PORT_MAC_QCFG_OUTPUT_LPBK_LOCAL UINT32_C(0x1) + uint8_t tc3_pri_queue_id; /* - * The HW will be configured with remote loopback such that - * port logic will send packets back out the transmitter that - * are received. + * pri assigned to MPLS TC(EXP) 4. This value can only be changed + * before traffic has started. + * A value of 0xff indicates that no pri is assigned to the + * MPLS TC(EXP) 4. */ - #define HWRM_PORT_MAC_QCFG_OUTPUT_LPBK_REMOTE UINT32_C(0x2) - #define HWRM_PORT_MAC_QCFG_OUTPUT_LPBK_LAST \ - HWRM_PORT_MAC_QCFG_OUTPUT_LPBK_REMOTE + uint8_t tc4_pri_queue_id; /* - * Priority setting for VLAN PRI to CoS mapping. - * # Each XXX_pri variable shall have a unique priority value - * when it is being used. - * # When comparing priorities of mappings, higher value - * indicates higher priority. - * For example, a value of 0-3 is returned where 0 is being - * the lowest priority and 3 is being the highest priority. - * # If the correspoding CoS mapping is not enabled, then this - * field should be ignored. - * # This value indicates the normalized priority value retained - * in the HWRM. + * pri assigned to MPLS TC(EXP) 5. This value can only be changed + * before traffic has started. + * A value of 0xff indicates that no pri is assigned to the + * MPLS TC(EXP) 5. */ - uint8_t vlan_pri2cos_map_pri; + uint8_t tc5_pri_queue_id; /* - * In this field, a number of CoS mappings related flags - * are used to indicate configured CoS mappings. + * pri assigned to MPLS TC(EXP) 6. This value can only + * be changed before traffic has started. + * A value of 0xff indicates that no pri is assigned to the + * MPLS TC(EXP) 6. */ - uint8_t flags; + uint8_t tc6_pri_queue_id; /* - * When this bit is set to '1', the inner VLAN PRI to CoS mapping - * is enabled. + * pri assigned to MPLS TC(EXP) 7. This value can only + * be changed before traffic has started. + * A value of 0xff indicates that no pri is assigned to the + * MPLS TC(EXP) 7. */ - #define HWRM_PORT_MAC_QCFG_OUTPUT_FLAGS_VLAN_PRI2COS_ENABLE \ + uint8_t tc7_pri_queue_id; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/***************************** + * hwrm_queue_mplstc2pri_cfg * + *****************************/ + + +/* hwrm_queue_mplstc2pri_cfg_input (size:256b/32B) */ +struct hwrm_queue_mplstc2pri_cfg_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + uint32_t enables; + /* + * This bit must be '1' for the mplstc0_pri_queue_id field to be + * configured. + */ + #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC0_PRI_QUEUE_ID \ UINT32_C(0x1) /* - * When this bit is set to '1', tunnel VLAN PRI field to - * CoS mapping is enabled. + * This bit must be '1' for the mplstc1_pri_queue_id field to be + * configured. */ - #define HWRM_PORT_MAC_QCFG_OUTPUT_FLAGS_TUNNEL_PRI2COS_ENABLE \ + #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC1_PRI_QUEUE_ID \ UINT32_C(0x2) /* - * When this bit is set to '1', the IP DSCP to CoS mapping is - * enabled. + * This bit must be '1' for the mplstc2_pri_queue_id field to be + * configured. */ - #define HWRM_PORT_MAC_QCFG_OUTPUT_FLAGS_IP_DSCP2COS_ENABLE \ + #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC2_PRI_QUEUE_ID \ UINT32_C(0x4) /* - * When this bit is '1', the Out-Of-Box WoL is enabled on this - * port. + * This bit must be '1' for the mplstc3_pri_queue_id field to be + * configured. */ - #define HWRM_PORT_MAC_QCFG_OUTPUT_FLAGS_OOB_WOL_ENABLE \ + #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC3_PRI_QUEUE_ID \ UINT32_C(0x8) - /* When this bit is '1', PTP is enabled for RX on this port. */ - #define HWRM_PORT_MAC_QCFG_OUTPUT_FLAGS_PTP_RX_TS_CAPTURE_ENABLE \ + /* + * This bit must be '1' for the mplstc4_pri_queue_id field to be + * configured. + */ + #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC4_PRI_QUEUE_ID \ UINT32_C(0x10) - /* When this bit is '1', PTP is enabled for TX on this port. */ - #define HWRM_PORT_MAC_QCFG_OUTPUT_FLAGS_PTP_TX_TS_CAPTURE_ENABLE \ + /* + * This bit must be '1' for the mplstc5_pri_queue_id field to be + * configured. + */ + #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC5_PRI_QUEUE_ID \ UINT32_C(0x20) /* - * Priority setting for tunnel VLAN PRI to CoS mapping. - * # Each XXX_pri variable shall have a unique priority value - * when it is being used. - * # When comparing priorities of mappings, higher value - * indicates higher priority. - * For example, a value of 0-3 is returned where 0 is being - * the lowest priority and 3 is being the highest priority. - * # If the correspoding CoS mapping is not enabled, then this - * field should be ignored. - * # This value indicates the normalized priority value retained - * in the HWRM. + * This bit must be '1' for the mplstc6_pri_queue_id field to be + * configured. */ - uint8_t tunnel_pri2cos_map_pri; + #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC6_PRI_QUEUE_ID \ + UINT32_C(0x40) /* - * Priority setting for DSCP to PRI mapping. - * # Each XXX_pri variable shall have a unique priority value - * when it is being used. - * # When comparing priorities of mappings, higher value - * indicates higher priority. - * For example, a value of 0-3 is returned where 0 is being - * the lowest priority and 3 is being the highest priority. - * # If the correspoding CoS mapping is not enabled, then this - * field should be ignored. - * # This value indicates the normalized priority value retained - * in the HWRM. + * This bit must be '1' for the mplstc7_pri_queue_id field to be + * configured. */ - uint8_t dscp2pri_map_pri; + #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC7_PRI_QUEUE_ID \ + UINT32_C(0x80) /* - * This is a 16-bit bit mask that represents the - * current configuration of time stamp capture of PTP messages - * on the receive side of this port. - * If bit 'i' is set, then the receive side of the port - * is configured to capture the time stamp of every - * received PTP message with messageType field value set - * to i. - * If all bits are set to 0 (i.e. field value set 0), - * then the receive side of the port is not configured - * to capture timestamp for PTP messages. - * If all bits are set to 1, then the receive side of the - * port is configured to capture timestamp for all PTP - * messages. + * Port ID of port for which the table is being configured. + * The HWRM needs to check whether this function is allowed + * to configure MPLS TC(EXP)to pri mapping on this port. + */ + uint8_t port_id; + uint8_t unused_0[3]; + /* + * pri assigned to MPLS TC(EXP) 0. This value can only + * be changed before traffic has started. + */ + uint8_t tc0_pri_queue_id; + /* + * pri assigned to MPLS TC(EXP) 1. This value can only + * be changed before traffic has started. + */ + uint8_t tc1_pri_queue_id; + /* + * pri assigned to MPLS TC(EXP) 2 This value can only + * be changed before traffic has started. + */ + uint8_t tc2_pri_queue_id; + /* + * pri assigned to MPLS TC(EXP) 3. This value can only + * be changed before traffic has started. + */ + uint8_t tc3_pri_queue_id; + /* + * pri assigned to MPLS TC(EXP) 4. This value can only + * be changed before traffic has started. + */ + uint8_t tc4_pri_queue_id; + /* + * pri assigned to MPLS TC(EXP) 5. This value can only + * be changed before traffic has started. + */ + uint8_t tc5_pri_queue_id; + /* + * pri assigned to MPLS TC(EXP) 6. This value can only + * be changed before traffic has started. + */ + uint8_t tc6_pri_queue_id; + /* + * pri assigned to MPLS TC(EXP) 7. This value can only + * be changed before traffic has started. + */ + uint8_t tc7_pri_queue_id; +} __rte_packed; + +/* hwrm_queue_mplstc2pri_cfg_output (size:128b/16B) */ +struct hwrm_queue_mplstc2pri_cfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - uint16_t rx_ts_capture_ptp_msg_type; + uint8_t valid; +} __rte_packed; + +/******************* + * hwrm_vnic_alloc * + *******************/ + + +/* hwrm_vnic_alloc_input (size:192b/24B) */ +struct hwrm_vnic_alloc_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * This is a 16-bit bit mask that represents the - * current configuration of time stamp capture of PTP messages - * on the transmit side of this port. - * If bit 'i' is set, then the transmit side of the port - * is configured to capture the time stamp of every - * received PTP message with messageType field value set - * to i. - * If all bits are set to 0 (i.e. field value set 0), - * then the transmit side of the port is not configured - * to capture timestamp for PTP messages. - * If all bits are set to 1, then the transmit side of the - * port is configured to capture timestamp for all PTP - * messages. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - uint16_t tx_ts_capture_ptp_msg_type; - /* Configuration of CoS fields. */ - uint8_t cos_field_cfg; - /* Reserved */ - #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_RSVD \ - UINT32_C(0x1) + uint16_t cmpl_ring; /* - * This field is used for selecting VLAN PRI value - * based on whether one or two VLAN Tags are present in - * the inner packet headers of tunneled packets or - * non-tunneled packets. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_MASK \ - UINT32_C(0x6) - #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_SFT \ - 1 + uint16_t seq_id; /* - * Select inner VLAN PRI when 1 or 2 VLAN Tags are - * present in the inner packet headers + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_INNERMOST \ - (UINT32_C(0x0) << 1) + uint16_t target_id; /* - * Select outer VLAN Tag PRI when 2 VLAN Tags are - * present in the inner packet headers. - * No VLAN PRI is selected for this configuration - * if only one VLAN Tag is present in the inner - * packet headers. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_OUTER \ - (UINT32_C(0x1) << 1) + uint64_t resp_addr; + uint32_t flags; /* - * Select outermost VLAN PRI when 1 or 2 VLAN Tags - * are present in the inner packet headers + * When this bit is '1', this VNIC is requested to + * be the default VNIC for this function. */ - #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_OUTERMOST \ - (UINT32_C(0x2) << 1) - /* Unspecified */ - #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_UNSPECIFIED \ - (UINT32_C(0x3) << 1) - #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_LAST \ - HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_UNSPECIFIED + #define HWRM_VNIC_ALLOC_INPUT_FLAGS_DEFAULT UINT32_C(0x1) + uint8_t unused_0[4]; +} __rte_packed; + +/* hwrm_vnic_alloc_output (size:128b/16B) */ +struct hwrm_vnic_alloc_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* Logical vnic ID */ + uint32_t vnic_id; + uint8_t unused_0[3]; /* - * This field is used for selecting tunnel VLAN PRI value - * based on whether one or two VLAN Tags are present in - * the tunnel headers of tunneled packets. This selection - * does not apply to non-tunneled packets. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_MASK \ - UINT32_C(0x18) - #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_SFT \ - 3 + uint8_t valid; +} __rte_packed; + +/****************** + * hwrm_vnic_free * + ******************/ + + +/* hwrm_vnic_free_input (size:192b/24B) */ +struct hwrm_vnic_free_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * Select inner VLAN PRI when 1 or 2 VLAN Tags are - * present in the tunnel packet headers + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_INNERMOST \ - (UINT32_C(0x0) << 3) + uint16_t cmpl_ring; /* - * Select outer VLAN Tag PRI when 2 VLAN Tags are - * present in the tunnel packet headers. - * No VLAN PRI is selected for this configuration - * if only one VLAN Tag is present in the tunnel - * packet headers. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_OUTER \ - (UINT32_C(0x1) << 3) + uint16_t seq_id; /* - * Select outermost VLAN PRI when 1 or 2 VLAN Tags - * are present in the tunnel packet headers + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_OUTERMOST \ - (UINT32_C(0x2) << 3) - /* Unspecified */ - #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_UNSPECIFIED \ - (UINT32_C(0x3) << 3) - #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_LAST \ - HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_UNSPECIFIED + uint16_t target_id; /* - * This field is used to provide default CoS value that - * has been configured on this port. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_DEFAULT_COS_MASK \ - UINT32_C(0xe0) - #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_DEFAULT_COS_SFT \ - 5 + uint64_t resp_addr; + /* Logical vnic ID */ + uint32_t vnic_id; + uint8_t unused_0[4]; +} __rte_packed; + +/* hwrm_vnic_free_output (size:128b/16B) */ +struct hwrm_vnic_free_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -12661,15 +25258,15 @@ struct hwrm_port_mac_qcfg_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/************************** - * hwrm_port_mac_ptp_qcfg * - **************************/ +/***************** + * hwrm_vnic_cfg * + *****************/ -/* hwrm_port_mac_ptp_qcfg_input (size:192b/24B) */ -struct hwrm_port_mac_ptp_qcfg_input { +/* hwrm_vnic_cfg_input (size:384b/48B) */ +struct hwrm_vnic_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -12682,458 +25279,451 @@ struct hwrm_port_mac_ptp_qcfg_input { * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ - uint16_t seq_id; + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + uint32_t flags; + /* + * When this bit is '1', the VNIC is requested to + * be the default VNIC for the function. + */ + #define HWRM_VNIC_CFG_INPUT_FLAGS_DEFAULT \ + UINT32_C(0x1) + /* + * When this bit is '1', the VNIC is being configured to + * strip VLAN in the RX path. + * If set to '0', then VLAN stripping is disabled on + * this VNIC. + */ + #define HWRM_VNIC_CFG_INPUT_FLAGS_VLAN_STRIP_MODE \ + UINT32_C(0x2) + /* + * When this bit is '1', the VNIC is being configured to + * buffer receive packets in the hardware until the host + * posts new receive buffers. + * If set to '0', then bd_stall is being configured to be + * disabled on this VNIC. + */ + #define HWRM_VNIC_CFG_INPUT_FLAGS_BD_STALL_MODE \ + UINT32_C(0x4) + /* + * When this bit is '1', the VNIC is being configured to + * receive both RoCE and non-RoCE traffic. + * If set to '0', then this VNIC is not configured to be + * operating in dual VNIC mode. + */ + #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_DUAL_VNIC_MODE \ + UINT32_C(0x8) + /* + * When this flag is set to '1', the VNIC is requested to + * be configured to receive only RoCE traffic. + * If this flag is set to '0', then this flag shall be + * ignored by the HWRM. + * If roce_dual_vnic_mode flag is set to '1' + * or roce_mirroring_capable_vnic_mode flag to 1, + * then the HWRM client shall not set this flag to '1'. + */ + #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_ONLY_VNIC_MODE \ + UINT32_C(0x10) + /* + * When a VNIC uses one destination ring group for certain + * application (e.g. Receive Flow Steering) where + * exact match is used to direct packets to a VNIC with one + * destination ring group only, there is no need to configure + * RSS indirection table for that VNIC as only one destination + * ring group is used. + * + * This flag is used to enable a mode where + * RSS is enabled in the VNIC using a RSS context + * for computing RSS hash but the RSS indirection table is + * not configured using hwrm_vnic_rss_cfg. + * + * If this mode is enabled, then the driver should not program + * RSS indirection table for the RSS context that is used for + * computing RSS hash only. + */ + #define HWRM_VNIC_CFG_INPUT_FLAGS_RSS_DFLT_CR_MODE \ + UINT32_C(0x20) /* - * The target ID of the command: - * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors - * * 0xFFFF - HWRM + * When this bit is '1', the VNIC is being configured to + * receive both RoCE and non-RoCE traffic, but forward only the + * RoCE traffic further. Also, RoCE traffic can be mirrored to + * L2 driver. */ - uint16_t target_id; + #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_MODE \ + UINT32_C(0x40) + uint32_t enables; /* - * A physical address pointer pointing to a host buffer that the - * command's response data will be written. This can be either a host - * physical address (HPA) or a guest physical address (GPA) and must - * point to a physically contiguous block of memory. + * This bit must be '1' for the dflt_ring_grp field to be + * configured. */ - uint64_t resp_addr; - /* Port ID of port that is being queried. */ - uint16_t port_id; - uint8_t unused_0[6]; -} __attribute__((packed)); - -/* hwrm_port_mac_ptp_qcfg_output (size:640b/80B) */ -struct hwrm_port_mac_ptp_qcfg_output { - /* The specific error status for the command. */ - uint16_t error_code; - /* The HWRM command request type. */ - uint16_t req_type; - /* The sequence ID from the original command. */ - uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; + #define HWRM_VNIC_CFG_INPUT_ENABLES_DFLT_RING_GRP \ + UINT32_C(0x1) /* - * In this field, a number of PTP related flags - * are used to indicate configured PTP capabilities. + * This bit must be '1' for the rss_rule field to be + * configured. */ - uint8_t flags; + #define HWRM_VNIC_CFG_INPUT_ENABLES_RSS_RULE \ + UINT32_C(0x2) /* - * When this bit is set to '1', the PTP related registers are - * directly accessible by the host. + * This bit must be '1' for the cos_rule field to be + * configured. */ - #define HWRM_PORT_MAC_PTP_QCFG_OUTPUT_FLAGS_DIRECT_ACCESS \ - UINT32_C(0x1) + #define HWRM_VNIC_CFG_INPUT_ENABLES_COS_RULE \ + UINT32_C(0x4) /* - * When this bit is set to '1', the PTP information is accessible - * via HWRM commands. + * This bit must be '1' for the lb_rule field to be + * configured. */ - #define HWRM_PORT_MAC_PTP_QCFG_OUTPUT_FLAGS_HWRM_ACCESS \ - UINT32_C(0x2) - uint8_t unused_0[3]; - /* Offset of the PTP register for the lower 32 bits of timestamp for RX. */ - uint32_t rx_ts_reg_off_lower; - /* Offset of the PTP register for the upper 32 bits of timestamp for RX. */ - uint32_t rx_ts_reg_off_upper; - /* Offset of the PTP register for the sequence ID for RX. */ - uint32_t rx_ts_reg_off_seq_id; - /* Offset of the first PTP source ID for RX. */ - uint32_t rx_ts_reg_off_src_id_0; - /* Offset of the second PTP source ID for RX. */ - uint32_t rx_ts_reg_off_src_id_1; - /* Offset of the third PTP source ID for RX. */ - uint32_t rx_ts_reg_off_src_id_2; - /* Offset of the domain ID for RX. */ - uint32_t rx_ts_reg_off_domain_id; - /* Offset of the PTP FIFO register for RX. */ - uint32_t rx_ts_reg_off_fifo; - /* Offset of the PTP advance FIFO register for RX. */ - uint32_t rx_ts_reg_off_fifo_adv; - /* PTP timestamp granularity for RX. */ - uint32_t rx_ts_reg_off_granularity; - /* Offset of the PTP register for the lower 32 bits of timestamp for TX. */ - uint32_t tx_ts_reg_off_lower; - /* Offset of the PTP register for the upper 32 bits of timestamp for TX. */ - uint32_t tx_ts_reg_off_upper; - /* Offset of the PTP register for the sequence ID for TX. */ - uint32_t tx_ts_reg_off_seq_id; - /* Offset of the PTP FIFO register for TX. */ - uint32_t tx_ts_reg_off_fifo; - /* PTP timestamp granularity for TX. */ - uint32_t tx_ts_reg_off_granularity; - uint8_t unused_1[7]; + #define HWRM_VNIC_CFG_INPUT_ENABLES_LB_RULE \ + UINT32_C(0x8) /* - * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' - * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. + * This bit must be '1' for the mru field to be + * configured. */ - uint8_t valid; -} __attribute__((packed)); - -/* Port Tx Statistics Formats */ -/* tx_port_stats (size:3264b/408B) */ -struct tx_port_stats { - /* Total Number of 64 Bytes frames transmitted */ - uint64_t tx_64b_frames; - /* Total Number of 65-127 Bytes frames transmitted */ - uint64_t tx_65b_127b_frames; - /* Total Number of 128-255 Bytes frames transmitted */ - uint64_t tx_128b_255b_frames; - /* Total Number of 256-511 Bytes frames transmitted */ - uint64_t tx_256b_511b_frames; - /* Total Number of 512-1023 Bytes frames transmitted */ - uint64_t tx_512b_1023b_frames; - /* Total Number of 1024-1518 Bytes frames transmitted */ - uint64_t tx_1024b_1518b_frames; + #define HWRM_VNIC_CFG_INPUT_ENABLES_MRU \ + UINT32_C(0x10) /* - * Total Number of each good VLAN (exludes FCS errors) - * frame transmitted which is 1519 to 1522 bytes in length - * inclusive (excluding framing bits but including FCS bytes). + * This bit must be '1' for the default_rx_ring_id field to be + * configured. */ - uint64_t tx_good_vlan_frames; - /* Total Number of 1519-2047 Bytes frames transmitted */ - uint64_t tx_1519b_2047b_frames; - /* Total Number of 2048-4095 Bytes frames transmitted */ - uint64_t tx_2048b_4095b_frames; - /* Total Number of 4096-9216 Bytes frames transmitted */ - uint64_t tx_4096b_9216b_frames; - /* Total Number of 9217-16383 Bytes frames transmitted */ - uint64_t tx_9217b_16383b_frames; - /* Total Number of good frames transmitted */ - uint64_t tx_good_frames; - /* Total Number of frames transmitted */ - uint64_t tx_total_frames; - /* Total number of unicast frames transmitted */ - uint64_t tx_ucast_frames; - /* Total number of multicast frames transmitted */ - uint64_t tx_mcast_frames; - /* Total number of broadcast frames transmitted */ - uint64_t tx_bcast_frames; - /* Total number of PAUSE control frames transmitted */ - uint64_t tx_pause_frames; + #define HWRM_VNIC_CFG_INPUT_ENABLES_DEFAULT_RX_RING_ID \ + UINT32_C(0x20) /* - * Total number of PFC/per-priority PAUSE - * control frames transmitted + * This bit must be '1' for the default_cmpl_ring_id field to be + * configured. */ - uint64_t tx_pfc_frames; - /* Total number of jabber frames transmitted */ - uint64_t tx_jabber_frames; - /* Total number of frames transmitted with FCS error */ - uint64_t tx_fcs_err_frames; - /* Total number of control frames transmitted */ - uint64_t tx_control_frames; - /* Total number of over-sized frames transmitted */ - uint64_t tx_oversz_frames; - /* Total number of frames with single deferral */ - uint64_t tx_single_dfrl_frames; - /* Total number of frames with multiple deferrals */ - uint64_t tx_multi_dfrl_frames; - /* Total number of frames with single collision */ - uint64_t tx_single_coll_frames; - /* Total number of frames with multiple collisions */ - uint64_t tx_multi_coll_frames; - /* Total number of frames with late collisions */ - uint64_t tx_late_coll_frames; - /* Total number of frames with excessive collisions */ - uint64_t tx_excessive_coll_frames; - /* Total number of fragmented frames transmitted */ - uint64_t tx_frag_frames; - /* Total number of transmit errors */ - uint64_t tx_err; - /* Total number of single VLAN tagged frames transmitted */ - uint64_t tx_tagged_frames; - /* Total number of double VLAN tagged frames transmitted */ - uint64_t tx_dbl_tagged_frames; - /* Total number of runt frames transmitted */ - uint64_t tx_runt_frames; - /* Total number of TX FIFO under runs */ - uint64_t tx_fifo_underruns; + #define HWRM_VNIC_CFG_INPUT_ENABLES_DEFAULT_CMPL_RING_ID \ + UINT32_C(0x40) + /* This bit must be '1' for the queue_id field to be configured. */ + #define HWRM_VNIC_CFG_INPUT_ENABLES_QUEUE_ID \ + UINT32_C(0x80) + /* This bit must be '1' for the rx_csum_v2_mode field to be configured. */ + #define HWRM_VNIC_CFG_INPUT_ENABLES_RX_CSUM_V2_MODE \ + UINT32_C(0x100) + /* Logical vnic ID */ + uint16_t vnic_id; /* - * Total number of PFC frames with PFC enabled bit for - * Pri 0 transmitted + * Default Completion ring for the VNIC. This ring will + * be chosen if packet does not match any RSS rules and if + * there is no COS rule. */ - uint64_t tx_pfc_ena_frames_pri0; + uint16_t dflt_ring_grp; /* - * Total number of PFC frames with PFC enabled bit for - * Pri 1 transmitted + * RSS ID for RSS rule/table structure. 0xFF... (All Fs) if + * there is no RSS rule. */ - uint64_t tx_pfc_ena_frames_pri1; + uint16_t rss_rule; /* - * Total number of PFC frames with PFC enabled bit for - * Pri 2 transmitted + * RSS ID for COS rule/table structure. 0xFF... (All Fs) if + * there is no COS rule. */ - uint64_t tx_pfc_ena_frames_pri2; + uint16_t cos_rule; /* - * Total number of PFC frames with PFC enabled bit for - * Pri 3 transmitted + * RSS ID for load balancing rule/table structure. + * 0xFF... (All Fs) if there is no LB rule. */ - uint64_t tx_pfc_ena_frames_pri3; + uint16_t lb_rule; /* - * Total number of PFC frames with PFC enabled bit for - * Pri 4 transmitted + * The maximum receive unit of the vnic. + * Each vnic is associated with a function. + * The vnic mru value overwrites the mru setting of the + * associated function. + * The HWRM shall make sure that vnic mru does not exceed + * the mru of the port the function is associated with. */ - uint64_t tx_pfc_ena_frames_pri4; + uint16_t mru; /* - * Total number of PFC frames with PFC enabled bit for - * Pri 5 transmitted + * Default Rx ring for the VNIC. This ring will + * be chosen if packet does not match any RSS rules. + * The aggregation ring associated with the Rx ring is + * implied based on the Rx ring specified when the + * aggregation ring was allocated. */ - uint64_t tx_pfc_ena_frames_pri5; + uint16_t default_rx_ring_id; /* - * Total number of PFC frames with PFC enabled bit for - * Pri 6 transmitted + * Default completion ring for the VNIC. This ring will + * be chosen if packet does not match any RSS rules. */ - uint64_t tx_pfc_ena_frames_pri6; + uint16_t default_cmpl_ring_id; /* - * Total number of PFC frames with PFC enabled bit for - * Pri 7 transmitted + * When specified, only incoming packets classified to the specified CoS + * queue ID will be arriving on this VNIC. Packet priority to CoS mapping + * rules can be specified using HWRM_QUEUE_PRI2COS_CFG. In this mode, + * ntuple filters with VNIC destination specified are invalid since they + * conflict with the the CoS to VNIC steering rules in this mode. + * + * If this field is not specified, packet to VNIC steering will be + * subject to the standard L2 filter rules and any additional ntuple + * filter rules with destination VNIC specified. */ - uint64_t tx_pfc_ena_frames_pri7; - /* Total number of EEE LPI Events on TX */ - uint64_t tx_eee_lpi_events; - /* EEE LPI Duration Counter on TX */ - uint64_t tx_eee_lpi_duration; + uint16_t queue_id; /* - * Total number of Link Level Flow Control (LLFC) messages - * transmitted + * If the device supports the RX V2 and RX TPA start V2 completion + * records as indicated by the HWRM_VNIC_QCAPS command, this field is + * used to specify the two RX checksum modes supported by these + * completion records. */ - uint64_t tx_llfc_logical_msgs; - /* Total number of HCFC messages transmitted */ - uint64_t tx_hcfc_msgs; - /* Total number of TX collisions */ - uint64_t tx_total_collisions; - /* Total number of transmitted bytes */ - uint64_t tx_bytes; - /* Total number of end-to-end HOL frames */ - uint64_t tx_xthol_frames; - /* Total Tx Drops per Port reported by STATS block */ - uint64_t tx_stat_discard; - /* Total Tx Error Drops per Port reported by STATS block */ - uint64_t tx_stat_error; -} __attribute__((packed)); - -/* Port Rx Statistics Formats */ -/* rx_port_stats (size:4224b/528B) */ -struct rx_port_stats { - /* Total Number of 64 Bytes frames received */ - uint64_t rx_64b_frames; - /* Total Number of 65-127 Bytes frames received */ - uint64_t rx_65b_127b_frames; - /* Total Number of 128-255 Bytes frames received */ - uint64_t rx_128b_255b_frames; - /* Total Number of 256-511 Bytes frames received */ - uint64_t rx_256b_511b_frames; - /* Total Number of 512-1023 Bytes frames received */ - uint64_t rx_512b_1023b_frames; - /* Total Number of 1024-1518 Bytes frames received */ - uint64_t rx_1024b_1518b_frames; + uint8_t rx_csum_v2_mode; /* - * Total Number of each good VLAN (exludes FCS errors) - * frame received which is 1519 to 1522 bytes in length - * inclusive (excluding framing bits but including FCS bytes). + * When configured with this checksum mode, the number of header + * groups in the delivered packet with a valid IP checksum and + * the number of header groups in the delivered packet with a valid + * L4 checksum are reported. Valid checksums are counted from the + * outermost header group to the innermost header group, stopping at + * the first error. This is the default checksum mode supported if + * the driver doesn't explicitly configure the RX checksum mode. */ - uint64_t rx_good_vlan_frames; - /* Total Number of 1519-2047 Bytes frames received */ - uint64_t rx_1519b_2047b_frames; - /* Total Number of 2048-4095 Bytes frames received */ - uint64_t rx_2048b_4095b_frames; - /* Total Number of 4096-9216 Bytes frames received */ - uint64_t rx_4096b_9216b_frames; - /* Total Number of 9217-16383 Bytes frames received */ - uint64_t rx_9217b_16383b_frames; - /* Total number of frames received */ - uint64_t rx_total_frames; - /* Total number of unicast frames received */ - uint64_t rx_ucast_frames; - /* Total number of multicast frames received */ - uint64_t rx_mcast_frames; - /* Total number of broadcast frames received */ - uint64_t rx_bcast_frames; - /* Total number of received frames with FCS error */ - uint64_t rx_fcs_err_frames; - /* Total number of control frames received */ - uint64_t rx_ctrl_frames; - /* Total number of PAUSE frames received */ - uint64_t rx_pause_frames; - /* Total number of PFC frames received */ - uint64_t rx_pfc_frames; + #define HWRM_VNIC_CFG_INPUT_RX_CSUM_V2_MODE_DEFAULT UINT32_C(0x0) /* - * Total number of frames received with an unsupported - * opcode + * When configured with this checksum mode, the checksum status is + * reported using 'all ok' mode. In the RX completion record, one + * bit indicates if the IP checksum is valid for all the parsed + * header groups with an IP checksum. Another bit indicates if the + * L4 checksum is valid for all the parsed header groups with an L4 + * checksum. The number of header groups that were parsed by the + * chip and passed in the delivered packet is also reported. */ - uint64_t rx_unsupported_opcode_frames; + #define HWRM_VNIC_CFG_INPUT_RX_CSUM_V2_MODE_ALL_OK UINT32_C(0x1) /* - * Total number of frames received with an unsupported - * DA for pause and PFC + * Any rx_csum_v2_mode value larger than or equal to this is not + * valid */ - uint64_t rx_unsupported_da_pausepfc_frames; - /* Total number of frames received with an unsupported SA */ - uint64_t rx_wrong_sa_frames; - /* Total number of received packets with alignment error */ - uint64_t rx_align_err_frames; - /* Total number of received frames with out-of-range length */ - uint64_t rx_oor_len_frames; - /* Total number of received frames with error termination */ - uint64_t rx_code_err_frames; + #define HWRM_VNIC_CFG_INPUT_RX_CSUM_V2_MODE_MAX UINT32_C(0x2) + #define HWRM_VNIC_CFG_INPUT_RX_CSUM_V2_MODE_LAST \ + HWRM_VNIC_CFG_INPUT_RX_CSUM_V2_MODE_MAX + uint8_t unused0[5]; +} __rte_packed; + +/* hwrm_vnic_cfg_output (size:128b/16B) */ +struct hwrm_vnic_cfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; /* - * Total number of received frames with a false carrier is - * detected during idle, as defined by RX_ER samples active - * and RXD is 0xE. The event is reported along with the - * statistics generated on the next received frame. Only - * one false carrier condition can be detected and logged - * between frames. - * - * Carrier event, valid for 10M/100M speed modes only. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - uint64_t rx_false_carrier_frames; - /* Total number of over-sized frames received */ - uint64_t rx_ovrsz_frames; - /* Total number of jabber packets received */ - uint64_t rx_jbr_frames; - /* Total number of received frames with MTU error */ - uint64_t rx_mtu_err_frames; - /* Total number of received frames with CRC match */ - uint64_t rx_match_crc_frames; - /* Total number of frames received promiscuously */ - uint64_t rx_promiscuous_frames; + uint8_t valid; +} __rte_packed; + +/****************** + * hwrm_vnic_qcfg * + ******************/ + + +/* hwrm_vnic_qcfg_input (size:256b/32B) */ +struct hwrm_vnic_qcfg_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * Total number of received frames with one or two VLAN - * tags + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - uint64_t rx_tagged_frames; - /* Total number of received frames with two VLAN tags */ - uint64_t rx_double_tagged_frames; - /* Total number of truncated frames received */ - uint64_t rx_trunc_frames; - /* Total number of good frames (without errors) received */ - uint64_t rx_good_frames; + uint16_t cmpl_ring; /* - * Total number of received PFC frames with transition from - * XON to XOFF on Pri 0 + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - uint64_t rx_pfc_xon2xoff_frames_pri0; + uint16_t seq_id; /* - * Total number of received PFC frames with transition from - * XON to XOFF on Pri 1 + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - uint64_t rx_pfc_xon2xoff_frames_pri1; + uint16_t target_id; /* - * Total number of received PFC frames with transition from - * XON to XOFF on Pri 2 + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - uint64_t rx_pfc_xon2xoff_frames_pri2; + uint64_t resp_addr; + uint32_t enables; /* - * Total number of received PFC frames with transition from - * XON to XOFF on Pri 3 + * This bit must be '1' for the vf_id_valid field to be + * configured. */ - uint64_t rx_pfc_xon2xoff_frames_pri3; + #define HWRM_VNIC_QCFG_INPUT_ENABLES_VF_ID_VALID UINT32_C(0x1) + /* Logical vnic ID */ + uint32_t vnic_id; + /* ID of Virtual Function whose VNIC resource is being queried. */ + uint16_t vf_id; + uint8_t unused_0[6]; +} __rte_packed; + +/* hwrm_vnic_qcfg_output (size:256b/32B) */ +struct hwrm_vnic_qcfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* Default Completion ring for the VNIC. */ + uint16_t dflt_ring_grp; /* - * Total number of received PFC frames with transition from - * XON to XOFF on Pri 4 + * RSS ID for RSS rule/table structure. 0xFF... (All Fs) if + * there is no RSS rule. */ - uint64_t rx_pfc_xon2xoff_frames_pri4; + uint16_t rss_rule; /* - * Total number of received PFC frames with transition from - * XON to XOFF on Pri 5 + * RSS ID for COS rule/table structure. 0xFF... (All Fs) if + * there is no COS rule. */ - uint64_t rx_pfc_xon2xoff_frames_pri5; + uint16_t cos_rule; /* - * Total number of received PFC frames with transition from - * XON to XOFF on Pri 6 + * RSS ID for load balancing rule/table structure. + * 0xFF... (All Fs) if there is no LB rule. */ - uint64_t rx_pfc_xon2xoff_frames_pri6; + uint16_t lb_rule; + /* The maximum receive unit of the vnic. */ + uint16_t mru; + uint8_t unused_0[2]; + uint32_t flags; /* - * Total number of received PFC frames with transition from - * XON to XOFF on Pri 7 + * When this bit is '1', the VNIC is the default VNIC for + * the function. */ - uint64_t rx_pfc_xon2xoff_frames_pri7; + #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_DEFAULT \ + UINT32_C(0x1) /* - * Total number of received PFC frames with PFC enabled - * bit for Pri 0 + * When this bit is '1', the VNIC is configured to + * strip VLAN in the RX path. + * If set to '0', then VLAN stripping is disabled on + * this VNIC. */ - uint64_t rx_pfc_ena_frames_pri0; + #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_VLAN_STRIP_MODE \ + UINT32_C(0x2) /* - * Total number of received PFC frames with PFC enabled - * bit for Pri 1 + * When this bit is '1', the VNIC is configured to + * buffer receive packets in the hardware until the host + * posts new receive buffers. + * If set to '0', then bd_stall is disabled on + * this VNIC. */ - uint64_t rx_pfc_ena_frames_pri1; + #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_BD_STALL_MODE \ + UINT32_C(0x4) /* - * Total number of received PFC frames with PFC enabled - * bit for Pri 2 + * When this bit is '1', the VNIC is configured to + * receive both RoCE and non-RoCE traffic. + * If set to '0', then this VNIC is not configured to + * operate in dual VNIC mode. */ - uint64_t rx_pfc_ena_frames_pri2; + #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_DUAL_VNIC_MODE \ + UINT32_C(0x8) /* - * Total number of received PFC frames with PFC enabled - * bit for Pri 3 + * When this flag is set to '1', the VNIC is configured to + * receive only RoCE traffic. + * When this flag is set to '0', the VNIC is not configured + * to receive only RoCE traffic. + * If roce_dual_vnic_mode flag and this flag both are set + * to '1', then it is an invalid configuration of the + * VNIC. The HWRM should not allow that type of + * mis-configuration by HWRM clients. + */ + #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_ONLY_VNIC_MODE \ + UINT32_C(0x10) + /* + * When a VNIC uses one destination ring group for certain + * application (e.g. Receive Flow Steering) where + * exact match is used to direct packets to a VNIC with one + * destination ring group only, there is no need to configure + * RSS indirection table for that VNIC as only one destination + * ring group is used. + * + * When this bit is set to '1', then the VNIC is enabled in a + * mode where RSS is enabled in the VNIC using a RSS context + * for computing RSS hash but the RSS indirection table is + * not configured. */ - uint64_t rx_pfc_ena_frames_pri3; + #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_RSS_DFLT_CR_MODE \ + UINT32_C(0x20) /* - * Total number of received PFC frames with PFC enabled - * bit for Pri 4 + * When this bit is '1', the VNIC is configured to + * receive both RoCE and non-RoCE traffic, but forward only + * RoCE traffic further. Also RoCE traffic can be mirrored to + * L2 driver. */ - uint64_t rx_pfc_ena_frames_pri4; + #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_MODE \ + UINT32_C(0x40) /* - * Total number of received PFC frames with PFC enabled - * bit for Pri 5 + * When returned with a valid CoS Queue id, the CoS Queue/VNIC association + * is valid. Otherwise it will return 0xFFFF to indicate no VNIC/CoS + * queue association. */ - uint64_t rx_pfc_ena_frames_pri5; + uint16_t queue_id; /* - * Total number of received PFC frames with PFC enabled - * bit for Pri 6 + * If the device supports the RX V2 and RX TPA start V2 completion + * records as indicated by the HWRM_VNIC_QCAPS command, this field is + * used to specify the current RX checksum mode configured for all the + * RX rings of a VNIC. */ - uint64_t rx_pfc_ena_frames_pri6; + uint8_t rx_csum_v2_mode; /* - * Total number of received PFC frames with PFC enabled - * bit for Pri 7 + * This value indicates that the VNIC is configured to use the + * default RX checksum mode for all the rings associated with this + * VNIC. */ - uint64_t rx_pfc_ena_frames_pri7; - /* Total Number of frames received with SCH CRC error */ - uint64_t rx_sch_crc_err_frames; - /* Total Number of under-sized frames received */ - uint64_t rx_undrsz_frames; - /* Total Number of fragmented frames received */ - uint64_t rx_frag_frames; - /* Total number of RX EEE LPI Events */ - uint64_t rx_eee_lpi_events; - /* EEE LPI Duration Counter on RX */ - uint64_t rx_eee_lpi_duration; + #define HWRM_VNIC_QCFG_OUTPUT_RX_CSUM_V2_MODE_DEFAULT UINT32_C(0x0) /* - * Total number of physical type Link Level Flow Control - * (LLFC) messages received + * This value indicates that the VNIC is configured to use the RX + * checksum ‘all_ok’ mode for all the rings associated with this + * VNIC. */ - uint64_t rx_llfc_physical_msgs; + #define HWRM_VNIC_QCFG_OUTPUT_RX_CSUM_V2_MODE_ALL_OK UINT32_C(0x1) /* - * Total number of logical type Link Level Flow Control - * (LLFC) messages received + * Any rx_csum_v2_mode value larger than or equal to this is not + * valid */ - uint64_t rx_llfc_logical_msgs; + #define HWRM_VNIC_QCFG_OUTPUT_RX_CSUM_V2_MODE_MAX UINT32_C(0x2) + #define HWRM_VNIC_QCFG_OUTPUT_RX_CSUM_V2_MODE_LAST \ + HWRM_VNIC_QCFG_OUTPUT_RX_CSUM_V2_MODE_MAX + uint8_t unused_1[4]; /* - * Total number of logical type Link Level Flow Control - * (LLFC) messages received with CRC error + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - uint64_t rx_llfc_msgs_with_crc_err; - /* Total number of HCFC messages received */ - uint64_t rx_hcfc_msgs; - /* Total number of HCFC messages received with CRC error */ - uint64_t rx_hcfc_msgs_with_crc_err; - /* Total number of received bytes */ - uint64_t rx_bytes; - /* Total number of bytes received in runt frames */ - uint64_t rx_runt_bytes; - /* Total number of runt frames received */ - uint64_t rx_runt_frames; - /* Total Rx Discards per Port reported by STATS block */ - uint64_t rx_stat_discard; - uint64_t rx_stat_err; -} __attribute__((packed)); + uint8_t valid; +} __rte_packed; -/******************** - * hwrm_port_qstats * - ********************/ +/******************* + * hwrm_vnic_qcaps * + *******************/ -/* hwrm_port_qstats_input (size:320b/40B) */ -struct hwrm_port_qstats_input { +/* hwrm_vnic_qcaps_input (size:192b/24B) */ +struct hwrm_vnic_qcaps_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -13150,7 +25740,8 @@ struct hwrm_port_qstats_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -13161,201 +25752,132 @@ struct hwrm_port_qstats_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* Port ID of port that is being queried. */ - uint16_t port_id; - uint8_t unused_0[6]; - /* - * This is the host address where - * Tx port statistics will be stored - */ - uint64_t tx_stat_host_addr; - /* - * This is the host address where - * Rx port statistics will be stored - */ - uint64_t rx_stat_host_addr; -} __attribute__((packed)); + uint32_t enables; + uint8_t unused_0[4]; +} __rte_packed; -/* hwrm_port_qstats_output (size:128b/16B) */ -struct hwrm_port_qstats_output { +/* hwrm_vnic_qcaps_output (size:192b/24B) */ +struct hwrm_vnic_qcaps_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; - /* The sequence ID from the original command. */ - uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; - /* The size of TX port statistics block in bytes. */ - uint16_t tx_stat_size; - /* The size of RX port statistics block in bytes. */ - uint16_t rx_stat_size; - uint8_t unused_0[3]; - /* - * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' - * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. - */ - uint8_t valid; -} __attribute__((packed)); - -/* Port Tx Statistics extended Formats */ -/* tx_port_stats_ext (size:2048b/256B) */ -struct tx_port_stats_ext { - /* Total number of tx bytes count on cos queue 0 */ - uint64_t tx_bytes_cos0; - /* Total number of tx bytes count on cos queue 1 */ - uint64_t tx_bytes_cos1; - /* Total number of tx bytes count on cos queue 2 */ - uint64_t tx_bytes_cos2; - /* Total number of tx bytes count on cos queue 3 */ - uint64_t tx_bytes_cos3; - /* Total number of tx bytes count on cos queue 4 */ - uint64_t tx_bytes_cos4; - /* Total number of tx bytes count on cos queue 5 */ - uint64_t tx_bytes_cos5; - /* Total number of tx bytes count on cos queue 6 */ - uint64_t tx_bytes_cos6; - /* Total number of tx bytes count on cos queue 7 */ - uint64_t tx_bytes_cos7; - /* Total number of tx packets count on cos queue 0 */ - uint64_t tx_packets_cos0; - /* Total number of tx packets count on cos queue 1 */ - uint64_t tx_packets_cos1; - /* Total number of tx packets count on cos queue 2 */ - uint64_t tx_packets_cos2; - /* Total number of tx packets count on cos queue 3 */ - uint64_t tx_packets_cos3; - /* Total number of tx packets count on cos queue 4 */ - uint64_t tx_packets_cos4; - /* Total number of tx packets count on cos queue 5 */ - uint64_t tx_packets_cos5; - /* Total number of tx packets count on cos queue 6 */ - uint64_t tx_packets_cos6; - /* Total number of tx packets count on cos queue 7 */ - uint64_t tx_packets_cos7; - /* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 0 */ - uint64_t pfc_pri0_tx_duration_us; - /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 0 */ - uint64_t pfc_pri0_tx_transitions; - /* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 1 */ - uint64_t pfc_pri1_tx_duration_us; - /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 1 */ - uint64_t pfc_pri1_tx_transitions; - /* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 2 */ - uint64_t pfc_pri2_tx_duration_us; - /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 2 */ - uint64_t pfc_pri2_tx_transitions; - /* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 3 */ - uint64_t pfc_pri3_tx_duration_us; - /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 3 */ - uint64_t pfc_pri3_tx_transitions; - /* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 4 */ - uint64_t pfc_pri4_tx_duration_us; - /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 4 */ - uint64_t pfc_pri4_tx_transitions; - /* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 5 */ - uint64_t pfc_pri5_tx_duration_us; - /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 5 */ - uint64_t pfc_pri5_tx_transitions; - /* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 6 */ - uint64_t pfc_pri6_tx_duration_us; - /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 6 */ - uint64_t pfc_pri6_tx_transitions; - /* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 7 */ - uint64_t pfc_pri7_tx_duration_us; - /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 7 */ - uint64_t pfc_pri7_tx_transitions; -} __attribute__((packed)); - -/* Port Rx Statistics extended Formats */ -/* rx_port_stats_ext (size:2368b/296B) */ -struct rx_port_stats_ext { - /* Number of times link state changed to down */ - uint64_t link_down_events; - /* Number of times the idle rings with pause bit are found */ - uint64_t continuous_pause_events; - /* Number of times the active rings pause bit resumed back */ - uint64_t resume_pause_events; - /* Number of times, the ROCE cos queue PFC is disabled to avoid pause flood/burst */ - uint64_t continuous_roce_pause_events; - /* Number of times, the ROCE cos queue PFC is enabled back */ - uint64_t resume_roce_pause_events; - /* Total number of rx bytes count on cos queue 0 */ - uint64_t rx_bytes_cos0; - /* Total number of rx bytes count on cos queue 1 */ - uint64_t rx_bytes_cos1; - /* Total number of rx bytes count on cos queue 2 */ - uint64_t rx_bytes_cos2; - /* Total number of rx bytes count on cos queue 3 */ - uint64_t rx_bytes_cos3; - /* Total number of rx bytes count on cos queue 4 */ - uint64_t rx_bytes_cos4; - /* Total number of rx bytes count on cos queue 5 */ - uint64_t rx_bytes_cos5; - /* Total number of rx bytes count on cos queue 6 */ - uint64_t rx_bytes_cos6; - /* Total number of rx bytes count on cos queue 7 */ - uint64_t rx_bytes_cos7; - /* Total number of rx packets count on cos queue 0 */ - uint64_t rx_packets_cos0; - /* Total number of rx packets count on cos queue 1 */ - uint64_t rx_packets_cos1; - /* Total number of rx packets count on cos queue 2 */ - uint64_t rx_packets_cos2; - /* Total number of rx packets count on cos queue 3 */ - uint64_t rx_packets_cos3; - /* Total number of rx packets count on cos queue 4 */ - uint64_t rx_packets_cos4; - /* Total number of rx packets count on cos queue 5 */ - uint64_t rx_packets_cos5; - /* Total number of rx packets count on cos queue 6 */ - uint64_t rx_packets_cos6; - /* Total number of rx packets count on cos queue 7 */ - uint64_t rx_packets_cos7; - /* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 0 */ - uint64_t pfc_pri0_rx_duration_us; - /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 0 */ - uint64_t pfc_pri0_rx_transitions; - /* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 1 */ - uint64_t pfc_pri1_rx_duration_us; - /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 1 */ - uint64_t pfc_pri1_rx_transitions; - /* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 2 */ - uint64_t pfc_pri2_rx_duration_us; - /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 2 */ - uint64_t pfc_pri2_rx_transitions; - /* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 3 */ - uint64_t pfc_pri3_rx_duration_us; - /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 3 */ - uint64_t pfc_pri3_rx_transitions; - /* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 4 */ - uint64_t pfc_pri4_rx_duration_us; - /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 4 */ - uint64_t pfc_pri4_rx_transitions; - /* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 5 */ - uint64_t pfc_pri5_rx_duration_us; - /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 5 */ - uint64_t pfc_pri5_rx_transitions; - /* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 6 */ - uint64_t pfc_pri6_rx_duration_us; - /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 6 */ - uint64_t pfc_pri6_rx_transitions; - /* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 7 */ - uint64_t pfc_pri7_rx_duration_us; - /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 7 */ - uint64_t pfc_pri7_rx_transitions; -} __attribute__((packed)); + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* The maximum receive unit that is settable on a vnic. */ + uint16_t mru; + uint8_t unused_0[2]; + uint32_t flags; + /* Unused. */ + #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_UNUSED \ + UINT32_C(0x1) + /* + * When this bit is '1', the capability of stripping VLAN in + * the RX path is supported on VNIC(s). + * If set to '0', then VLAN stripping capability is + * not supported on VNIC(s). + */ + #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_VLAN_STRIP_CAP \ + UINT32_C(0x2) + /* + * When this bit is '1', the capability to buffer receive + * packets in the hardware until the host posts new receive buffers + * is supported on VNIC(s). + * If set to '0', then bd_stall capability is not supported + * on VNIC(s). + */ + #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_BD_STALL_CAP \ + UINT32_C(0x4) + /* + * When this bit is '1', the capability to + * receive both RoCE and non-RoCE traffic on VNIC(s) is + * supported. + * If set to '0', then the capability to receive + * both RoCE and non-RoCE traffic on VNIC(s) is + * not supported. + */ + #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_ROCE_DUAL_VNIC_CAP \ + UINT32_C(0x8) + /* + * When this bit is set to '1', the capability to configure + * a VNIC to receive only RoCE traffic is supported. + * When this flag is set to '0', the VNIC capability to + * configure to receive only RoCE traffic is not supported. + */ + #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_ROCE_ONLY_VNIC_CAP \ + UINT32_C(0x10) + /* + * When this bit is set to '1', then the capability to enable + * a VNIC in a mode where RSS context without configuring + * RSS indirection table is supported (for RSS hash computation). + * When this bit is set to '0', then a VNIC can not be configured + * with a mode to enable RSS context without configuring RSS + * indirection table. + */ + #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_RSS_DFLT_CR_CAP \ + UINT32_C(0x20) + /* + * When this bit is '1', the capability to + * mirror the the RoCE traffic is supported. + * If set to '0', then the capability to mirror the + * RoCE traffic is not supported. + */ + #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_CAP \ + UINT32_C(0x40) + /* + * When this bit is '1', the outermost RSS hashing capability + * is supported. If set to '0', then the outermost RSS hashing + * capability is not supported. + */ + #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_OUTERMOST_RSS_CAP \ + UINT32_C(0x80) + /* + * When this bit is '1', it indicates that firmware supports the + * ability to steer incoming packets from one CoS queue to one + * VNIC. This optional feature can then be enabled + * using HWRM_VNIC_CFG on any VNIC. This feature is only + * available when NVM option “enable_cos_classfication” is set + * to 1. If set to '0', firmware does not support this feature. + */ + #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_COS_ASSIGNMENT_CAP \ + UINT32_C(0x100) + /* + * When this bit is '1', it indicates that HW and firmware supports + * the use of RX V2 and RX TPA start V2 completion records for all + * the RX rings of a VNIC. Once set, this feature is mandatory to + * be used for the RX rings of the VNIC. Additionally, two new RX + * checksum features supported by these ompletion records can be + * configured using the HWRM_VNIC_CFG on a VNIC. If set to '0', the + * HW and the firmware does not support this feature. + */ + #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_RX_CMPL_V2_CAP \ + UINT32_C(0x200) + /* + * This field advertises the maximum concurrent TPA aggregations + * supported by the VNIC on new devices that support TPA v2. + * '0' means that TPA v2 is not supported. + */ + uint16_t max_aggs_supported; + uint8_t unused_1[5]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; -/************************ - * hwrm_port_qstats_ext * - ************************/ +/********************* + * hwrm_vnic_tpa_cfg * + *********************/ -/* hwrm_port_qstats_ext_input (size:320b/40B) */ -struct hwrm_port_qstats_ext_input { +/* hwrm_vnic_tpa_cfg_input (size:320b/40B) */ +struct hwrm_vnic_tpa_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -13372,7 +25894,8 @@ struct hwrm_port_qstats_ext_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -13383,54 +25906,167 @@ struct hwrm_port_qstats_ext_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* Port ID of port that is being queried. */ - uint16_t port_id; + uint32_t flags; /* - * The size of TX port extended - * statistics block in bytes. + * When this bit is '1', the VNIC shall be configured to + * perform transparent packet aggregation (TPA) of + * non-tunneled TCP packets. */ - uint16_t tx_stat_size; + #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_TPA \ + UINT32_C(0x1) /* - * The size of RX port extended - * statistics block in bytes + * When this bit is '1', the VNIC shall be configured to + * perform transparent packet aggregation (TPA) of + * tunneled TCP packets. */ - uint16_t rx_stat_size; + #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_ENCAP_TPA \ + UINT32_C(0x2) + /* + * When this bit is '1', the VNIC shall be configured to + * perform transparent packet aggregation (TPA) according + * to Windows Receive Segment Coalescing (RSC) rules. + */ + #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_RSC_WND_UPDATE \ + UINT32_C(0x4) + /* + * When this bit is '1', the VNIC shall be configured to + * perform transparent packet aggregation (TPA) according + * to Linux Generic Receive Offload (GRO) rules. + */ + #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO \ + UINT32_C(0x8) + /* + * When this bit is '1', the VNIC shall be configured to + * perform transparent packet aggregation (TPA) for TCP + * packets with IP ECN set to non-zero. + */ + #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_WITH_ECN \ + UINT32_C(0x10) + /* + * When this bit is '1', the VNIC shall be configured to + * perform transparent packet aggregation (TPA) for + * GRE tunneled TCP packets only if all packets have the + * same GRE sequence. + */ + #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_WITH_SAME_GRE_SEQ \ + UINT32_C(0x20) + /* + * When this bit is '1' and the GRO mode is enabled, + * the VNIC shall be configured to + * perform transparent packet aggregation (TPA) for + * TCP/IPv4 packets with consecutively increasing IPIDs. + * In other words, the last packet that is being + * aggregated to an already existing aggregation context + * shall have IPID 1 more than the IPID of the last packet + * that was aggregated in that aggregation context. + */ + #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO_IPID_CHECK \ + UINT32_C(0x40) + /* + * When this bit is '1' and the GRO mode is enabled, + * the VNIC shall be configured to + * perform transparent packet aggregation (TPA) for + * TCP packets with the same TTL (IPv4) or Hop limit (IPv6) + * value. + */ + #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO_TTL_CHECK \ + UINT32_C(0x80) + /* + * When this bit is '1' and the GRO mode is enabled, + * the VNIC shall DMA payload data using GRO rules. + * When this bit is '0', the VNIC shall DMA payload data + * using the more efficient LRO rules of filling all + * aggregation buffers. + */ + #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_PACK_AS_GRO \ + UINT32_C(0x100) + uint32_t enables; + /* + * This bit must be '1' for the max_agg_segs field to be + * configured. + */ + #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_SEGS UINT32_C(0x1) + /* + * This bit must be '1' for the max_aggs field to be + * configured. + */ + #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGGS UINT32_C(0x2) + /* + * This bit must be '1' for the max_agg_timer field to be + * configured. + */ + #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_TIMER UINT32_C(0x4) + /* deprecated bit. Do not use!!! */ + #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MIN_AGG_LEN UINT32_C(0x8) + /* Logical vnic ID */ + uint16_t vnic_id; + /* + * This is the maximum number of TCP segments that can + * be aggregated (unit is Log2). Max value is 31. On new + * devices supporting TPA v2, the unit is multiples of 4 and + * valid values are > 0 and <= 63. + */ + uint16_t max_agg_segs; + /* 1 segment */ + #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_1 UINT32_C(0x0) + /* 2 segments */ + #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_2 UINT32_C(0x1) + /* 4 segments */ + #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_4 UINT32_C(0x2) + /* 8 segments */ + #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_8 UINT32_C(0x3) + /* Any segment size larger than this is not valid */ + #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_MAX UINT32_C(0x1f) + #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_LAST \ + HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_MAX + /* + * This is the maximum number of aggregations this VNIC is + * allowed (unit is Log2). Max value is 7. On new devices + * supporting TPA v2, this is in unit of 1 and must be > 0 + * and <= max_aggs_supported in the hwrm_vnic_qcaps response + * to enable TPA v2. + */ + uint16_t max_aggs; + /* 1 aggregation */ + #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_1 UINT32_C(0x0) + /* 2 aggregations */ + #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_2 UINT32_C(0x1) + /* 4 aggregations */ + #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_4 UINT32_C(0x2) + /* 8 aggregations */ + #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_8 UINT32_C(0x3) + /* 16 aggregations */ + #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_16 UINT32_C(0x4) + /* Any aggregation size larger than this is not valid */ + #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_MAX UINT32_C(0x7) + #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_LAST \ + HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_MAX uint8_t unused_0[2]; /* - * This is the host address where - * Tx port statistics will be stored + * This is the maximum amount of time allowed for + * an aggregation context to complete after it was initiated. */ - uint64_t tx_stat_host_addr; + uint32_t max_agg_timer; /* - * This is the host address where - * Rx port statistics will be stored + * This is the minimum amount of payload length required to + * start an aggregation context. This field is deprecated and + * should be set to 0. The minimum length is set by firmware + * and can be queried using hwrm_vnic_tpa_qcfg. */ - uint64_t rx_stat_host_addr; -} __attribute__((packed)); + uint32_t min_agg_len; +} __rte_packed; -/* hwrm_port_qstats_ext_output (size:128b/16B) */ -struct hwrm_port_qstats_ext_output { +/* hwrm_vnic_tpa_cfg_output (size:128b/16B) */ +struct hwrm_vnic_tpa_cfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; - /* The size of TX port statistics block in bytes. */ - uint16_t tx_stat_size; - /* The size of RX port statistics block in bytes. */ - uint16_t rx_stat_size; - /* Total number of active cos queues available. */ - uint16_t total_active_cos_queues; - uint8_t flags; - /* - * If set to 1, then this field indicates that clear - * roce specific counters is supported. - */ - #define HWRM_PORT_QSTATS_EXT_OUTPUT_FLAGS_CLEAR_ROCE_COUNTERS_SUPPORTED \ - UINT32_C(0x1) + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -13439,15 +26075,15 @@ struct hwrm_port_qstats_ext_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/************************* - * hwrm_port_lpbk_qstats * - *************************/ +/********************* + * hwrm_vnic_rss_cfg * + *********************/ -/* hwrm_port_lpbk_qstats_input (size:128b/16B) */ -struct hwrm_port_lpbk_qstats_input { +/* hwrm_vnic_rss_cfg_input (size:384b/48B) */ +struct hwrm_vnic_rss_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -13464,7 +26100,8 @@ struct hwrm_port_lpbk_qstats_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -13475,10 +26112,103 @@ struct hwrm_port_lpbk_qstats_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; -} __attribute__((packed)); + uint32_t hash_type; + /* + * When this bit is '1', the RSS hash shall be computed + * over source and destination IPv4 addresses of IPv4 + * packets. + */ + #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV4 UINT32_C(0x1) + /* + * When this bit is '1', the RSS hash shall be computed + * over source/destination IPv4 addresses and + * source/destination ports of TCP/IPv4 packets. + */ + #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV4 UINT32_C(0x2) + /* + * When this bit is '1', the RSS hash shall be computed + * over source/destination IPv4 addresses and + * source/destination ports of UDP/IPv4 packets. + */ + #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV4 UINT32_C(0x4) + /* + * When this bit is '1', the RSS hash shall be computed + * over source and destination IPv4 addresses of IPv6 + * packets. + */ + #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV6 UINT32_C(0x8) + /* + * When this bit is '1', the RSS hash shall be computed + * over source/destination IPv6 addresses and + * source/destination ports of TCP/IPv6 packets. + */ + #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV6 UINT32_C(0x10) + /* + * When this bit is '1', the RSS hash shall be computed + * over source/destination IPv6 addresses and + * source/destination ports of UDP/IPv6 packets. + */ + #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV6 UINT32_C(0x20) + /* VNIC ID of VNIC associated with RSS table being configured. */ + uint16_t vnic_id; + /* + * Specifies which VNIC ring table pair to configure. + * Valid values range from 0 to 7. + */ + uint8_t ring_table_pair_index; + /* Flags to specify different RSS hash modes. */ + uint8_t hash_mode_flags; + /* + * When this bit is '1', it indicates using current RSS + * hash mode setting configured in the device. + */ + #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_DEFAULT \ + UINT32_C(0x1) + /* + * When this bit is '1', it indicates requesting support of + * RSS hashing over innermost 4 tuples {l3.src, l3.dest, + * l4.src, l4.dest} for tunnel packets. For none-tunnel + * packets, the RSS hash is computed over the normal + * src/dest l3 and src/dest l4 headers. + */ + #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_INNERMOST_4 \ + UINT32_C(0x2) + /* + * When this bit is '1', it indicates requesting support of + * RSS hashing over innermost 2 tuples {l3.src, l3.dest} for + * tunnel packets. For none-tunnel packets, the RSS hash is + * computed over the normal src/dest l3 headers. + */ + #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_INNERMOST_2 \ + UINT32_C(0x4) + /* + * When this bit is '1', it indicates requesting support of + * RSS hashing over outermost 4 tuples {t_l3.src, t_l3.dest, + * t_l4.src, t_l4.dest} for tunnel packets. For none-tunnel + * packets, the RSS hash is computed over the normal + * src/dest l3 and src/dest l4 headers. + */ + #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_OUTERMOST_4 \ + UINT32_C(0x8) + /* + * When this bit is '1', it indicates requesting support of + * RSS hashing over outermost 2 tuples {t_l3.src, t_l3.dest} for + * tunnel packets. For none-tunnel packets, the RSS hash is + * computed over the normal src/dest l3 headers. + */ + #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_OUTERMOST_2 \ + UINT32_C(0x10) + /* This is the address for rss ring group table */ + uint64_t ring_grp_tbl_addr; + /* This is the address for rss hash key table */ + uint64_t hash_key_tbl_addr; + /* Index to the rss indirection table. */ + uint16_t rss_ctx_idx; + uint8_t unused_1[6]; +} __rte_packed; -/* hwrm_port_lpbk_qstats_output (size:768b/96B) */ -struct hwrm_port_lpbk_qstats_output { +/* hwrm_vnic_rss_cfg_output (size:128b/16B) */ +struct hwrm_vnic_rss_cfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -13487,26 +26217,6 @@ struct hwrm_port_lpbk_qstats_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* Number of transmitted unicast frames */ - uint64_t lpbk_ucast_frames; - /* Number of transmitted multicast frames */ - uint64_t lpbk_mcast_frames; - /* Number of transmitted broadcast frames */ - uint64_t lpbk_bcast_frames; - /* Number of transmitted bytes for unicast traffic */ - uint64_t lpbk_ucast_bytes; - /* Number of transmitted bytes for multicast traffic */ - uint64_t lpbk_mcast_bytes; - /* Number of transmitted bytes for broadcast traffic */ - uint64_t lpbk_bcast_bytes; - /* Total Tx Drops for loopback traffic reported by STATS block */ - uint64_t tx_stat_discard; - /* Total Tx Error Drops for loopback traffic reported by STATS block */ - uint64_t tx_stat_error; - /* Total Rx Drops for loopback traffic reported by STATS block */ - uint64_t rx_stat_discard; - /* Total Rx Error Drops for loopback traffic reported by STATS block */ - uint64_t rx_stat_error; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output @@ -13516,15 +26226,36 @@ struct hwrm_port_lpbk_qstats_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/*********************** - * hwrm_port_clr_stats * - ***********************/ +/* hwrm_vnic_rss_cfg_cmd_err (size:64b/8B) */ +struct hwrm_vnic_rss_cfg_cmd_err { + /* + * command specific error codes that goes to + * the cmd_err field in Common HWRM Error Response. + */ + uint8_t code; + /* Unknown error */ + #define HWRM_VNIC_RSS_CFG_CMD_ERR_CODE_UNKNOWN \ + UINT32_C(0x0) + /* + * Unable to change global RSS mode to outer due to all active + * interfaces are not ready to support outer RSS hashing. + */ + #define HWRM_VNIC_RSS_CFG_CMD_ERR_CODE_INTERFACE_NOT_READY \ + UINT32_C(0x1) + #define HWRM_VNIC_RSS_CFG_CMD_ERR_CODE_LAST \ + HWRM_VNIC_RSS_CFG_CMD_ERR_CODE_INTERFACE_NOT_READY + uint8_t unused_0[7]; +} __rte_packed; + +/********************** + * hwrm_vnic_rss_qcfg * + **********************/ -/* hwrm_port_clr_stats_input (size:192b/24B) */ -struct hwrm_port_clr_stats_input { +/* hwrm_vnic_rss_qcfg_input (size:192b/24B) */ +struct hwrm_vnic_rss_qcfg_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -13541,7 +26272,8 @@ struct hwrm_port_clr_stats_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -13552,33 +26284,104 @@ struct hwrm_port_clr_stats_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* Port ID of port that is being queried. */ - uint16_t port_id; - uint8_t flags; + /* Index to the rss indirection table. */ + uint16_t rss_ctx_idx; + uint8_t unused_0[6]; +} __rte_packed; + +/* hwrm_vnic_rss_qcfg_output (size:512b/64B) */ +struct hwrm_vnic_rss_qcfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint32_t hash_type; /* - * If set to 1, then this field indicates clear the following RoCE - * specific counters. - * RoCE associated TX/RX cos counters - * CNP associated TX/RX cos counters - * RoCE/CNP specific TX/RX flow counters - * Firmware will determine the RoCE/CNP cos queue based on qos profile. - * This flag is honored only when RoCE is enabled on that port. + * When this bit is '1', the RSS hash shall be computed + * over source and destination IPv4 addresses of IPv4 + * packets. + */ + #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_IPV4 UINT32_C(0x1) + /* + * When this bit is '1', the RSS hash shall be computed + * over source/destination IPv4 addresses and + * source/destination ports of TCP/IPv4 packets. + */ + #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_TCP_IPV4 UINT32_C(0x2) + /* + * When this bit is '1', the RSS hash shall be computed + * over source/destination IPv4 addresses and + * source/destination ports of UDP/IPv4 packets. + */ + #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_UDP_IPV4 UINT32_C(0x4) + /* + * When this bit is '1', the RSS hash shall be computed + * over source and destination IPv4 addresses of IPv6 + * packets. + */ + #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_IPV6 UINT32_C(0x8) + /* + * When this bit is '1', the RSS hash shall be computed + * over source/destination IPv6 addresses and + * source/destination ports of TCP/IPv6 packets. + */ + #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_TCP_IPV6 UINT32_C(0x10) + /* + * When this bit is '1', the RSS hash shall be computed + * over source/destination IPv6 addresses and + * source/destination ports of UDP/IPv6 packets. + */ + #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_UDP_IPV6 UINT32_C(0x20) + uint8_t unused_0[4]; + /* This is the value of rss hash key */ + uint32_t hash_key[10]; + /* Flags to specify different RSS hash modes. */ + uint8_t hash_mode_flags; + /* + * When this bit is '1', it indicates using current RSS + * hash mode setting configured in the device. + */ + #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_DEFAULT \ + UINT32_C(0x1) + /* + * When this bit is '1', it indicates requesting support of + * RSS hashing over innermost 4 tuples {l3.src, l3.dest, + * l4.src, l4.dest} for tunnel packets. For none-tunnel + * packets, the RSS hash is computed over the normal + * src/dest l3 and src/dest l4 headers. + */ + #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_INNERMOST_4 \ + UINT32_C(0x2) + /* + * When this bit is '1', it indicates requesting support of + * RSS hashing over innermost 2 tuples {l3.src, l3.dest} for + * tunnel packets. For none-tunnel packets, the RSS hash is + * computed over the normal src/dest l3 headers. + */ + #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_INNERMOST_2 \ + UINT32_C(0x4) + /* + * When this bit is '1', it indicates requesting support of + * RSS hashing over outermost 4 tuples {t_l3.src, t_l3.dest, + * t_l4.src, t_l4.dest} for tunnel packets. For none-tunnel + * packets, the RSS hash is computed over the normal + * src/dest l3 and src/dest l4 headers. + */ + #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_OUTERMOST_4 \ + UINT32_C(0x8) + /* + * When this bit is '1', it indicates requesting support of + * RSS hashing over outermost 2 tuples {t_l3.src, t_l3.dest} for + * tunnel packets. For none-tunnel packets, the RSS hash is + * computed over the normal src/dest l3 headers. */ - #define HWRM_PORT_CLR_STATS_INPUT_FLAGS_ROCE_COUNTERS UINT32_C(0x1) - uint8_t unused_0[5]; -} __attribute__((packed)); - -/* hwrm_port_clr_stats_output (size:128b/16B) */ -struct hwrm_port_clr_stats_output { - /* The specific error status for the command. */ - uint16_t error_code; - /* The HWRM command request type. */ - uint16_t req_type; - /* The sequence ID from the original command. */ - uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; - uint8_t unused_0[7]; + #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_OUTERMOST_2 \ + UINT32_C(0x10) + uint8_t unused_1[6]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -13587,15 +26390,15 @@ struct hwrm_port_clr_stats_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/*********************** - * hwrm_port_phy_qcaps * - ***********************/ +/************************** + * hwrm_vnic_plcmodes_cfg * + **************************/ -/* hwrm_port_phy_qcaps_input (size:192b/24B) */ -struct hwrm_port_phy_qcaps_input { +/* hwrm_vnic_plcmodes_cfg_input (size:320b/40B) */ +struct hwrm_vnic_plcmodes_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -13612,7 +26415,8 @@ struct hwrm_port_phy_qcaps_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -13623,227 +26427,170 @@ struct hwrm_port_phy_qcaps_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* Port ID of port that is being queried. */ - uint16_t port_id; - uint8_t unused_0[6]; -} __attribute__((packed)); - -/* hwrm_port_phy_qcaps_output (size:192b/24B) */ -struct hwrm_port_phy_qcaps_output { - /* The specific error status for the command. */ - uint16_t error_code; - /* The HWRM command request type. */ - uint16_t req_type; - /* The sequence ID from the original command. */ - uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; - /* PHY capability flags */ - uint8_t flags; + uint32_t flags; /* - * If set to 1, then this field indicates that the - * link is capable of supporting EEE. + * When this bit is '1', the VNIC shall be configured to + * use regular placement algorithm. + * By default, the regular placement algorithm shall be + * enabled on the VNIC. */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_EEE_SUPPORTED \ + #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_REGULAR_PLACEMENT \ UINT32_C(0x1) /* - * If set to 1, then this field indicates that the - * PHY is capable of supporting external loopback. + * When this bit is '1', the VNIC shall be configured + * use the jumbo placement algorithm. */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_EXTERNAL_LPBK_SUPPORTED \ + #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_JUMBO_PLACEMENT \ UINT32_C(0x2) /* - * Reserved field. The HWRM shall set this field to 0. - * An HWRM client shall ignore this field. + * When this bit is '1', the VNIC shall be configured + * to enable Header-Data split for IPv4 packets according + * to the following rules: + * # If the packet is identified as TCP/IPv4, then the + * packet is split at the beginning of the TCP payload. + * # If the packet is identified as UDP/IPv4, then the + * packet is split at the beginning of UDP payload. + * # If the packet is identified as non-TCP and non-UDP + * IPv4 packet, then the packet is split at the beginning + * of the upper layer protocol header carried in the IPv4 + * packet. */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_RSVD1_MASK \ - UINT32_C(0xfc) - #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_RSVD1_SFT 2 - /* Number of front panel ports for this device. */ - uint8_t port_cnt; - /* Not supported or unknown */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_UNKNOWN UINT32_C(0x0) - /* single port device */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_1 UINT32_C(0x1) - /* 2-port device */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_2 UINT32_C(0x2) - /* 3-port device */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_3 UINT32_C(0x3) - /* 4-port device */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_4 UINT32_C(0x4) - #define HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_LAST \ - HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_4 + #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_IPV4 \ + UINT32_C(0x4) /* - * This is a bit mask to indicate what speeds are supported - * as forced speeds on this link. - * For each speed that can be forced on this link, the - * corresponding mask bit shall be set to '1'. + * When this bit is '1', the VNIC shall be configured + * to enable Header-Data split for IPv6 packets according + * to the following rules: + * # If the packet is identified as TCP/IPv6, then the + * packet is split at the beginning of the TCP payload. + * # If the packet is identified as UDP/IPv6, then the + * packet is split at the beginning of UDP payload. + * # If the packet is identified as non-TCP and non-UDP + * IPv6 packet, then the packet is split at the beginning + * of the upper layer protocol header carried in the IPv6 + * packet. */ - uint16_t supported_speeds_force_mode; - /* 100Mb link speed (Half-duplex) */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_100MBHD \ - UINT32_C(0x1) - /* 100Mb link speed (Full-duplex) */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_100MB \ - UINT32_C(0x2) - /* 1Gb link speed (Half-duplex) */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_1GBHD \ - UINT32_C(0x4) - /* 1Gb link speed (Full-duplex) */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_1GB \ + #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_IPV6 \ UINT32_C(0x8) - /* 2Gb link speed */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_2GB \ - UINT32_C(0x10) - /* 25Gb link speed */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_2_5GB \ - UINT32_C(0x20) - /* 10Gb link speed */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_10GB \ - UINT32_C(0x40) - /* 20Gb link speed */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_20GB \ - UINT32_C(0x80) - /* 25Gb link speed */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_25GB \ - UINT32_C(0x100) - /* 40Gb link speed */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_40GB \ - UINT32_C(0x200) - /* 50Gb link speed */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_50GB \ - UINT32_C(0x400) - /* 100Gb link speed */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_100GB \ - UINT32_C(0x800) - /* 10Mb link speed (Half-duplex) */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_10MBHD \ - UINT32_C(0x1000) - /* 10Mb link speed (Full-duplex) */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_10MB \ - UINT32_C(0x2000) /* - * This is a bit mask to indicate what speeds are supported - * for autonegotiation on this link. - * For each speed that can be autonegotiated on this link, the - * corresponding mask bit shall be set to '1'. + * When this bit is '1', the VNIC shall be configured + * to enable Header-Data split for FCoE packets at the + * beginning of FC payload. */ - uint16_t supported_speeds_auto_mode; - /* 100Mb link speed (Half-duplex) */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_100MBHD \ - UINT32_C(0x1) - /* 100Mb link speed (Full-duplex) */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_100MB \ - UINT32_C(0x2) - /* 1Gb link speed (Half-duplex) */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_1GBHD \ - UINT32_C(0x4) - /* 1Gb link speed (Full-duplex) */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_1GB \ - UINT32_C(0x8) - /* 2Gb link speed */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_2GB \ + #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_FCOE \ UINT32_C(0x10) - /* 25Gb link speed */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_2_5GB \ + /* + * When this bit is '1', the VNIC shall be configured + * to enable Header-Data split for RoCE packets at the + * beginning of RoCE payload (after BTH/GRH headers). + */ + #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_ROCE \ UINT32_C(0x20) - /* 10Gb link speed */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_10GB \ + /* + * When this bit is '1', the VNIC shall be configured use the virtio + * placement algorithm. This feature can only be configured when + * proxy mode is supported on the function. + */ + #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_VIRTIO_PLACEMENT \ UINT32_C(0x40) - /* 20Gb link speed */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_20GB \ - UINT32_C(0x80) - /* 25Gb link speed */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_25GB \ - UINT32_C(0x100) - /* 40Gb link speed */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_40GB \ - UINT32_C(0x200) - /* 50Gb link speed */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_50GB \ - UINT32_C(0x400) - /* 100Gb link speed */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_100GB \ - UINT32_C(0x800) - /* 10Mb link speed (Half-duplex) */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_10MBHD \ - UINT32_C(0x1000) - /* 10Mb link speed (Full-duplex) */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_10MB \ - UINT32_C(0x2000) + uint32_t enables; /* - * This is a bit mask to indicate what speeds are supported - * for EEE on this link. - * For each speed that can be autonegotiated when EEE is enabled - * on this link, the corresponding mask bit shall be set to '1'. - * This field is only valid when the eee_suppotred is set to '1'. + * This bit must be '1' for the jumbo_thresh_valid field to be + * configured. */ - uint16_t supported_speeds_eee_mode; - /* Reserved */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_RSVD1 \ + #define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_JUMBO_THRESH_VALID \ UINT32_C(0x1) - /* 100Mb link speed (Full-duplex) */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_100MB \ + /* + * This bit must be '1' for the hds_offset_valid field to be + * configured. + */ + #define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_HDS_OFFSET_VALID \ UINT32_C(0x2) - /* Reserved */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_RSVD2 \ + /* + * This bit must be '1' for the hds_threshold_valid field to be + * configured. + */ + #define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_HDS_THRESHOLD_VALID \ UINT32_C(0x4) - /* 1Gb link speed (Full-duplex) */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_1GB \ + /* + * This bit must be '1' for the max_bds_valid field to be + * configured. + */ + #define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_MAX_BDS_VALID \ UINT32_C(0x8) - /* Reserved */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_RSVD3 \ - UINT32_C(0x10) - /* Reserved */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_RSVD4 \ - UINT32_C(0x20) - /* 10Gb link speed */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_10GB \ - UINT32_C(0x40) - uint32_t tx_lpi_timer_low; + /* Logical vnic ID */ + uint32_t vnic_id; /* - * The lowest value of TX LPI timer that can be set on this link - * when EEE is enabled. This value is in microseconds. - * This field is valid only when_eee_supported is set to '1'. + * When jumbo placement algorithm is enabled, this value + * is used to determine the threshold for jumbo placement. + * Packets with length larger than this value will be + * placed according to the jumbo placement algorithm. */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_TX_LPI_TIMER_LOW_MASK \ - UINT32_C(0xffffff) - #define HWRM_PORT_PHY_QCAPS_OUTPUT_TX_LPI_TIMER_LOW_SFT 0 + uint16_t jumbo_thresh; /* - * Reserved field. The HWRM shall set this field to 0. - * An HWRM client shall ignore this field. + * This value is used to determine the offset into + * packet buffer where the split data (payload) will be + * placed according to one of HDS placement algorithm. + * + * The lengths of packet buffers provided for split data + * shall be larger than this value. */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_RSVD2_MASK \ - UINT32_C(0xff000000) - #define HWRM_PORT_PHY_QCAPS_OUTPUT_RSVD2_SFT 24 - uint32_t valid_tx_lpi_timer_high; + uint16_t hds_offset; /* - * The highest value of TX LPI timer that can be set on this link - * when EEE is enabled. This value is in microseconds. - * This field is valid only when_eee_supported is set to '1'. + * When one of the HDS placement algorithm is enabled, this + * value is used to determine the threshold for HDS + * placement. + * Packets with length larger than this value will be + * placed according to the HDS placement algorithm. + * This value shall be in multiple of 4 bytes. */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_TX_LPI_TIMER_HIGH_MASK \ - UINT32_C(0xffffff) - #define HWRM_PORT_PHY_QCAPS_OUTPUT_TX_LPI_TIMER_HIGH_SFT 0 + uint16_t hds_threshold; + /* + * When virtio placement algorithm is enabled, this + * value is used to determine the the maximum number of BDs + * that can be used to place an Rx Packet. + * If an incoming packet does not fit in the buffers described + * by the max BDs, the packet will be dropped and an error + * will be reported in the completion. Valid values for this + * field are between 1 and 8. If the VNIC uses header-data- + * separation and/or TPA with buffer spanning enabled, valid + * values for this field are between 2 and 8. + * This feature can only be configured when proxy mode is + * supported on the function. + */ + uint16_t max_bds; + uint8_t unused_0[4]; +} __rte_packed; + +/* hwrm_vnic_plcmodes_cfg_output (size:128b/16B) */ +struct hwrm_vnic_plcmodes_cfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. + * When writing a command completion or response to an internal + * processor, the order of writes has to be such that this field is + * written last. */ - #define HWRM_PORT_PHY_QCAPS_OUTPUT_VALID_MASK \ - UINT32_C(0xff000000) - #define HWRM_PORT_PHY_QCAPS_OUTPUT_VALID_SFT 24 -} __attribute__((packed)); + uint8_t valid; +} __rte_packed; -/********************* - * hwrm_port_led_cfg * - *********************/ +/*************************** + * hwrm_vnic_plcmodes_qcfg * + ***************************/ -/* hwrm_port_led_cfg_input (size:512b/64B) */ -struct hwrm_port_led_cfg_input { +/* hwrm_vnic_plcmodes_qcfg_input (size:192b/24B) */ +struct hwrm_vnic_plcmodes_qcfg_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -13860,7 +26607,8 @@ struct hwrm_port_led_cfg_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -13871,376 +26619,224 @@ struct hwrm_port_led_cfg_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - uint32_t enables; + /* Logical vnic ID */ + uint32_t vnic_id; + uint8_t unused_0[4]; +} __rte_packed; + +/* hwrm_vnic_plcmodes_qcfg_output (size:192b/24B) */ +struct hwrm_vnic_plcmodes_qcfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint32_t flags; /* - * This bit must be '1' for the led0_id field to be - * configured. + * When this bit is '1', the VNIC is configured to + * use regular placement algorithm. */ - #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_ID \ + #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_REGULAR_PLACEMENT \ UINT32_C(0x1) /* - * This bit must be '1' for the led0_state field to be - * configured. + * When this bit is '1', the VNIC is configured to + * use the jumbo placement algorithm. */ - #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_STATE \ + #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_JUMBO_PLACEMENT \ UINT32_C(0x2) /* - * This bit must be '1' for the led0_color field to be - * configured. + * When this bit is '1', the VNIC is configured + * to enable Header-Data split for IPv4 packets. */ - #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_COLOR \ + #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_IPV4 \ UINT32_C(0x4) /* - * This bit must be '1' for the led0_blink_on field to be - * configured. + * When this bit is '1', the VNIC is configured + * to enable Header-Data split for IPv6 packets. */ - #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_ON \ + #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_IPV6 \ UINT32_C(0x8) /* - * This bit must be '1' for the led0_blink_off field to be - * configured. + * When this bit is '1', the VNIC is configured + * to enable Header-Data split for FCoE packets. */ - #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_OFF \ + #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_FCOE \ UINT32_C(0x10) /* - * This bit must be '1' for the led0_group_id field to be - * configured. - */ - #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_GROUP_ID \ - UINT32_C(0x20) - /* - * This bit must be '1' for the led1_id field to be - * configured. - */ - #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_ID \ - UINT32_C(0x40) - /* - * This bit must be '1' for the led1_state field to be - * configured. - */ - #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_STATE \ - UINT32_C(0x80) - /* - * This bit must be '1' for the led1_color field to be - * configured. - */ - #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_COLOR \ - UINT32_C(0x100) - /* - * This bit must be '1' for the led1_blink_on field to be - * configured. - */ - #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_BLINK_ON \ - UINT32_C(0x200) - /* - * This bit must be '1' for the led1_blink_off field to be - * configured. - */ - #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_BLINK_OFF \ - UINT32_C(0x400) - /* - * This bit must be '1' for the led1_group_id field to be - * configured. - */ - #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_GROUP_ID \ - UINT32_C(0x800) - /* - * This bit must be '1' for the led2_id field to be - * configured. - */ - #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_ID \ - UINT32_C(0x1000) - /* - * This bit must be '1' for the led2_state field to be - * configured. - */ - #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_STATE \ - UINT32_C(0x2000) - /* - * This bit must be '1' for the led2_color field to be - * configured. - */ - #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_COLOR \ - UINT32_C(0x4000) - /* - * This bit must be '1' for the led2_blink_on field to be - * configured. - */ - #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_BLINK_ON \ - UINT32_C(0x8000) - /* - * This bit must be '1' for the led2_blink_off field to be - * configured. - */ - #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_BLINK_OFF \ - UINT32_C(0x10000) - /* - * This bit must be '1' for the led2_group_id field to be - * configured. - */ - #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_GROUP_ID \ - UINT32_C(0x20000) - /* - * This bit must be '1' for the led3_id field to be - * configured. - */ - #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_ID \ - UINT32_C(0x40000) - /* - * This bit must be '1' for the led3_state field to be - * configured. - */ - #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_STATE \ - UINT32_C(0x80000) - /* - * This bit must be '1' for the led3_color field to be - * configured. - */ - #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_COLOR \ - UINT32_C(0x100000) - /* - * This bit must be '1' for the led3_blink_on field to be - * configured. - */ - #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_BLINK_ON \ - UINT32_C(0x200000) - /* - * This bit must be '1' for the led3_blink_off field to be - * configured. - */ - #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_BLINK_OFF \ - UINT32_C(0x400000) - /* - * This bit must be '1' for the led3_group_id field to be - * configured. - */ - #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_GROUP_ID \ - UINT32_C(0x800000) - /* Port ID of port whose LEDs are configured. */ - uint16_t port_id; - /* - * The number of LEDs that are being configured. - * Up to 4 LEDs can be configured with this command. - */ - uint8_t num_leds; - /* Reserved field. */ - uint8_t rsvd; - /* An identifier for the LED #0. */ - uint8_t led0_id; - /* The requested state of the LED #0. */ - uint8_t led0_state; - /* Default state of the LED */ - #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_DEFAULT UINT32_C(0x0) - /* Off */ - #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_OFF UINT32_C(0x1) - /* On */ - #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_ON UINT32_C(0x2) - /* Blink */ - #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_BLINK UINT32_C(0x3) - /* Blink Alternately */ - #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_BLINKALT UINT32_C(0x4) - #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_LAST \ - HWRM_PORT_LED_CFG_INPUT_LED0_STATE_BLINKALT - /* The requested color of LED #0. */ - uint8_t led0_color; - /* Default */ - #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_DEFAULT UINT32_C(0x0) - /* Amber */ - #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_AMBER UINT32_C(0x1) - /* Green */ - #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_GREEN UINT32_C(0x2) - /* Green or Amber */ - #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_GREENAMBER UINT32_C(0x3) - #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_LAST \ - HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_GREENAMBER - uint8_t unused_0; + * When this bit is '1', the VNIC is configured + * to enable Header-Data split for RoCE packets. + */ + #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_ROCE \ + UINT32_C(0x20) /* - * If the LED #0 state is "blink" or "blinkalt", then - * this field represents the requested time in milliseconds - * to keep LED on between cycles. + * When this bit is '1', the VNIC is configured + * to be the default VNIC of the requesting function. */ - uint16_t led0_blink_on; + #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_DFLT_VNIC \ + UINT32_C(0x40) /* - * If the LED #0 state is "blink" or "blinkalt", then - * this field represents the requested time in milliseconds - * to keep LED off between cycles. + * When this bit is '1', the VNIC is configured to use the virtio + * placement algorithm. This feature can only be configured when + * proxy mode is supported on the function. */ - uint16_t led0_blink_off; + #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_VIRTIO_PLACEMENT \ + UINT32_C(0x80) /* - * An identifier for the group of LEDs that LED #0 belongs - * to. - * If set to 0, then the LED #0 shall not be grouped and - * shall be treated as an individual resource. - * For all other non-zero values of this field, LED #0 shall - * be grouped together with the LEDs with the same group ID - * value. + * When jumbo placement algorithm is enabled, this value + * is used to determine the threshold for jumbo placement. + * Packets with length larger than this value will be + * placed according to the jumbo placement algorithm. */ - uint8_t led0_group_id; - /* Reserved field. */ - uint8_t rsvd0; - /* An identifier for the LED #1. */ - uint8_t led1_id; - /* The requested state of the LED #1. */ - uint8_t led1_state; - /* Default state of the LED */ - #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_DEFAULT UINT32_C(0x0) - /* Off */ - #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_OFF UINT32_C(0x1) - /* On */ - #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_ON UINT32_C(0x2) - /* Blink */ - #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_BLINK UINT32_C(0x3) - /* Blink Alternately */ - #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_BLINKALT UINT32_C(0x4) - #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_LAST \ - HWRM_PORT_LED_CFG_INPUT_LED1_STATE_BLINKALT - /* The requested color of LED #1. */ - uint8_t led1_color; - /* Default */ - #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_DEFAULT UINT32_C(0x0) - /* Amber */ - #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_AMBER UINT32_C(0x1) - /* Green */ - #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_GREEN UINT32_C(0x2) - /* Green or Amber */ - #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_GREENAMBER UINT32_C(0x3) - #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_LAST \ - HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_GREENAMBER - uint8_t unused_1; + uint16_t jumbo_thresh; /* - * If the LED #1 state is "blink" or "blinkalt", then - * this field represents the requested time in milliseconds - * to keep LED on between cycles. + * This value is used to determine the offset into + * packet buffer where the split data (payload) will be + * placed according to one of HDS placement algorithm. + * + * The lengths of packet buffers provided for split data + * shall be larger than this value. */ - uint16_t led1_blink_on; + uint16_t hds_offset; /* - * If the LED #1 state is "blink" or "blinkalt", then - * this field represents the requested time in milliseconds - * to keep LED off between cycles. + * When one of the HDS placement algorithm is enabled, this + * value is used to determine the threshold for HDS + * placement. + * Packets with length larger than this value will be + * placed according to the HDS placement algorithm. + * This value shall be in multiple of 4 bytes. */ - uint16_t led1_blink_off; + uint16_t hds_threshold; /* - * An identifier for the group of LEDs that LED #1 belongs - * to. - * If set to 0, then the LED #1 shall not be grouped and - * shall be treated as an individual resource. - * For all other non-zero values of this field, LED #1 shall - * be grouped together with the LEDs with the same group ID - * value. + * When virtio placement algorithm is enabled, this + * value is used to determine the the maximum number of BDs + * that can be used to place an Rx Packet. + * If an incoming packet does not fit in the buffers described + * by the max BDs, the packet will be dropped and an error + * will be reported in the completion. Valid values for this + * field are between 1 and 8. If the VNIC uses header-data- + * separation and/or TPA with buffer spanning enabled, valid + * values for this field are between 2 and 8. + * This feature can only be configured when proxy mode is supported + * on the function + */ + uint16_t max_bds; + uint8_t unused_0[3]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal + * processor, the order of writes has to be such that this field is + * written last. */ - uint8_t led1_group_id; - /* Reserved field. */ - uint8_t rsvd1; - /* An identifier for the LED #2. */ - uint8_t led2_id; - /* The requested state of the LED #2. */ - uint8_t led2_state; - /* Default state of the LED */ - #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_DEFAULT UINT32_C(0x0) - /* Off */ - #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_OFF UINT32_C(0x1) - /* On */ - #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_ON UINT32_C(0x2) - /* Blink */ - #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_BLINK UINT32_C(0x3) - /* Blink Alternately */ - #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_BLINKALT UINT32_C(0x4) - #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_LAST \ - HWRM_PORT_LED_CFG_INPUT_LED2_STATE_BLINKALT - /* The requested color of LED #2. */ - uint8_t led2_color; - /* Default */ - #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_DEFAULT UINT32_C(0x0) - /* Amber */ - #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_AMBER UINT32_C(0x1) - /* Green */ - #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_GREEN UINT32_C(0x2) - /* Green or Amber */ - #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_GREENAMBER UINT32_C(0x3) - #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_LAST \ - HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_GREENAMBER - uint8_t unused_2; + uint8_t valid; +} __rte_packed; + +/********************************** + * hwrm_vnic_rss_cos_lb_ctx_alloc * + **********************************/ + + +/* hwrm_vnic_rss_cos_lb_ctx_alloc_input (size:128b/16B) */ +struct hwrm_vnic_rss_cos_lb_ctx_alloc_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * If the LED #2 state is "blink" or "blinkalt", then - * this field represents the requested time in milliseconds - * to keep LED on between cycles. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - uint16_t led2_blink_on; + uint16_t cmpl_ring; /* - * If the LED #2 state is "blink" or "blinkalt", then - * this field represents the requested time in milliseconds - * to keep LED off between cycles. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - uint16_t led2_blink_off; + uint16_t seq_id; /* - * An identifier for the group of LEDs that LED #2 belongs - * to. - * If set to 0, then the LED #2 shall not be grouped and - * shall be treated as an individual resource. - * For all other non-zero values of this field, LED #2 shall - * be grouped together with the LEDs with the same group ID - * value. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - uint8_t led2_group_id; - /* Reserved field. */ - uint8_t rsvd2; - /* An identifier for the LED #3. */ - uint8_t led3_id; - /* The requested state of the LED #3. */ - uint8_t led3_state; - /* Default state of the LED */ - #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_DEFAULT UINT32_C(0x0) - /* Off */ - #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_OFF UINT32_C(0x1) - /* On */ - #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_ON UINT32_C(0x2) - /* Blink */ - #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_BLINK UINT32_C(0x3) - /* Blink Alternately */ - #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_BLINKALT UINT32_C(0x4) - #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_LAST \ - HWRM_PORT_LED_CFG_INPUT_LED3_STATE_BLINKALT - /* The requested color of LED #3. */ - uint8_t led3_color; - /* Default */ - #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_DEFAULT UINT32_C(0x0) - /* Amber */ - #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_AMBER UINT32_C(0x1) - /* Green */ - #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_GREEN UINT32_C(0x2) - /* Green or Amber */ - #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_GREENAMBER UINT32_C(0x3) - #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_LAST \ - HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_GREENAMBER - uint8_t unused_3; + uint16_t target_id; /* - * If the LED #3 state is "blink" or "blinkalt", then - * this field represents the requested time in milliseconds - * to keep LED on between cycles. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - uint16_t led3_blink_on; + uint64_t resp_addr; +} __rte_packed; + +/* hwrm_vnic_rss_cos_lb_ctx_alloc_output (size:128b/16B) */ +struct hwrm_vnic_rss_cos_lb_ctx_alloc_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* rss_cos_lb_ctx_id is 16 b */ + uint16_t rss_cos_lb_ctx_id; + uint8_t unused_0[5]; /* - * If the LED #3 state is "blink" or "blinkalt", then - * this field represents the requested time in milliseconds - * to keep LED off between cycles. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - uint16_t led3_blink_off; + uint8_t valid; +} __rte_packed; + +/********************************* + * hwrm_vnic_rss_cos_lb_ctx_free * + *********************************/ + + +/* hwrm_vnic_rss_cos_lb_ctx_free_input (size:192b/24B) */ +struct hwrm_vnic_rss_cos_lb_ctx_free_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * An identifier for the group of LEDs that LED #3 belongs - * to. - * If set to 0, then the LED #3 shall not be grouped and - * shall be treated as an individual resource. - * For all other non-zero values of this field, LED #3 shall - * be grouped together with the LEDs with the same group ID - * value. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - uint8_t led3_group_id; - /* Reserved field. */ - uint8_t rsvd3; -} __attribute__((packed)); + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* rss_cos_lb_ctx_id is 16 b */ + uint16_t rss_cos_lb_ctx_id; + uint8_t unused_0[6]; +} __rte_packed; -/* hwrm_port_led_cfg_output (size:128b/16B) */ -struct hwrm_port_led_cfg_output { +/* hwrm_vnic_rss_cos_lb_ctx_free_output (size:128b/16B) */ +struct hwrm_vnic_rss_cos_lb_ctx_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -14258,49 +26854,330 @@ struct hwrm_port_led_cfg_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/********************** - * hwrm_port_led_qcfg * - **********************/ +/******************* + * hwrm_ring_alloc * + *******************/ -/* hwrm_port_led_qcfg_input (size:192b/24B) */ -struct hwrm_port_led_qcfg_input { +/* hwrm_ring_alloc_input (size:704b/88B) */ +struct hwrm_ring_alloc_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ - uint16_t cmpl_ring; + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + uint32_t enables; + /* + * This bit must be '1' for the ring_arb_cfg field to be + * configured. + */ + #define HWRM_RING_ALLOC_INPUT_ENABLES_RING_ARB_CFG \ + UINT32_C(0x2) + /* + * This bit must be '1' for the stat_ctx_id_valid field to be + * configured. + */ + #define HWRM_RING_ALLOC_INPUT_ENABLES_STAT_CTX_ID_VALID \ + UINT32_C(0x8) + /* + * This bit must be '1' for the max_bw_valid field to be + * configured. + */ + #define HWRM_RING_ALLOC_INPUT_ENABLES_MAX_BW_VALID \ + UINT32_C(0x20) + /* + * This bit must be '1' for the rx_ring_id field to be + * configured. + */ + #define HWRM_RING_ALLOC_INPUT_ENABLES_RX_RING_ID_VALID \ + UINT32_C(0x40) + /* + * This bit must be '1' for the nq_ring_id field to be + * configured. + */ + #define HWRM_RING_ALLOC_INPUT_ENABLES_NQ_RING_ID_VALID \ + UINT32_C(0x80) + /* + * This bit must be '1' for the rx_buf_size field to be + * configured. + */ + #define HWRM_RING_ALLOC_INPUT_ENABLES_RX_BUF_SIZE_VALID \ + UINT32_C(0x100) + /* + * This bit must be '1' for the sq_id field to be + * configured. + */ + #define HWRM_RING_ALLOC_INPUT_ENABLES_SQ_ID \ + UINT32_C(0x200) + /* Ring Type. */ + uint8_t ring_type; + /* L2 Completion Ring (CR) */ + #define HWRM_RING_ALLOC_INPUT_RING_TYPE_L2_CMPL UINT32_C(0x0) + /* TX Ring (TR) */ + #define HWRM_RING_ALLOC_INPUT_RING_TYPE_TX UINT32_C(0x1) + /* RX Ring (RR) */ + #define HWRM_RING_ALLOC_INPUT_RING_TYPE_RX UINT32_C(0x2) + /* RoCE Notification Completion Ring (ROCE_CR) */ + #define HWRM_RING_ALLOC_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3) + /* RX Aggregation Ring */ + #define HWRM_RING_ALLOC_INPUT_RING_TYPE_RX_AGG UINT32_C(0x4) + /* Notification Queue */ + #define HWRM_RING_ALLOC_INPUT_RING_TYPE_NQ UINT32_C(0x5) + #define HWRM_RING_ALLOC_INPUT_RING_TYPE_LAST \ + HWRM_RING_ALLOC_INPUT_RING_TYPE_NQ + uint8_t unused_0; + /* Ring allocation flags. */ + uint16_t flags; + /* + * For Rx rings, the incoming packet data can be placed at either + * a 0B or 2B offset from the start of the Rx packet buffer. When + * '1', the received packet will be padded with 2B of zeros at the + * front of the packet. Note that this flag is only used for + * Rx rings and is ignored for all other rings included Rx + * Aggregation rings. + */ + #define HWRM_RING_ALLOC_INPUT_FLAGS_RX_SOP_PAD UINT32_C(0x1) + /* + * This value is a pointer to the page table for the + * Ring. + */ + uint64_t page_tbl_addr; + /* First Byte Offset of the first entry in the first page. */ + uint32_t fbo; + /* + * Actual page size in 2^page_size. The supported range is increments + * in powers of 2 from 16 bytes to 1GB. + * - 4 = 16 B + * Page size is 16 B. + * - 12 = 4 KB + * Page size is 4 KB. + * - 13 = 8 KB + * Page size is 8 KB. + * - 16 = 64 KB + * Page size is 64 KB. + * - 21 = 2 MB + * Page size is 2 MB. + * - 22 = 4 MB + * Page size is 4 MB. + * - 30 = 1 GB + * Page size is 1 GB. + */ + uint8_t page_size; + /* + * This value indicates the depth of page table. + * For this version of the specification, value other than 0 or + * 1 shall be considered as an invalid value. + * When the page_tbl_depth = 0, then it is treated as a + * special case with the following. + * 1. FBO and page size fields are not valid. + * 2. page_tbl_addr is the physical address of the first + * element of the ring. + */ + uint8_t page_tbl_depth; + /* Used by a PF driver to associate a SQ with one of its TX rings. */ + uint16_t sq_id; + /* + * Number of 16B units in the ring. Minimum size for + * a ring is 16 16B entries. + */ + uint32_t length; + /* + * Logical ring number for the ring to be allocated. + * This value determines the position in the doorbell + * area where the update to the ring will be made. + * + * For completion rings, this value is also the MSI-X + * vector number for the function the completion ring is + * associated with. + */ + uint16_t logical_id; + /* + * This field is used only when ring_type is a TX ring. + * This value indicates what completion ring the TX ring + * is associated with. + */ + uint16_t cmpl_ring_id; + /* + * This field is used only when ring_type is a TX ring. + * This value indicates what CoS queue the TX ring + * is associated with. + */ + uint16_t queue_id; + /* + * When allocating a Rx ring or Rx aggregation ring, this field + * specifies the size of the buffer descriptors posted to the ring. + */ + uint16_t rx_buf_size; + /* + * When allocating an Rx aggregation ring, this field + * specifies the associated Rx ring ID. + */ + uint16_t rx_ring_id; + /* + * When allocating a completion ring, this field + * specifies the associated NQ ring ID. + */ + uint16_t nq_ring_id; + /* + * This field is used only when ring_type is a TX ring. + * This field is used to configure arbitration related + * parameters for a TX ring. + */ + uint16_t ring_arb_cfg; + /* Arbitration policy used for the ring. */ + #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_MASK \ + UINT32_C(0xf) + #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_SFT 0 + /* + * Use strict priority for the TX ring. + * Priority value is specified in arb_policy_param + */ + #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_SP \ + UINT32_C(0x1) + /* + * Use weighted fair queue arbitration for the TX ring. + * Weight is specified in arb_policy_param + */ + #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_WFQ \ + UINT32_C(0x2) + #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_LAST \ + HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_WFQ + /* Reserved field. */ + #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_RSVD_MASK \ + UINT32_C(0xf0) + #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_RSVD_SFT 4 + /* + * Arbitration policy specific parameter. + * # For strict priority arbitration policy, this field + * represents a priority value. If set to 0, then the priority + * is not specified and the HWRM is allowed to select + * any priority for this TX ring. + * # For weighted fair queue arbitration policy, this field + * represents a weight value. If set to 0, then the weight + * is not specified and the HWRM is allowed to select + * any weight for this TX ring. + */ + #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_PARAM_MASK \ + UINT32_C(0xff00) + #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_PARAM_SFT 8 + uint16_t unused_3; + /* + * This field is reserved for the future use. + * It shall be set to 0. + */ + uint32_t reserved3; + /* + * This field is used only when ring_type is a TX ring. + * This input indicates what statistics context this ring + * should be associated with. + */ + uint32_t stat_ctx_id; + /* + * This field is reserved for the future use. + * It shall be set to 0. + */ + uint32_t reserved4; /* - * The sequence ID is used by the driver for tracking multiple - * commands. This ID is treated as opaque data by the firmware and - * the value is returned in the `hwrm_resp_hdr` upon completion. + * This field is used only when ring_type is a TX ring + * to specify maximum BW allocated to the TX ring. + * The HWRM will translate this value into byte counter and + * time interval used for this ring inside the device. */ - uint16_t seq_id; + uint32_t max_bw; + /* The bandwidth value. */ + #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_SFT 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_LAST \ + HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_SFT 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_LAST \ + HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID /* - * The target ID of the command: - * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors - * * 0xFFFF - HWRM + * This field is used only when ring_type is a Completion ring. + * This value indicates what interrupt mode should be used + * on this completion ring. + * Note: In the legacy interrupt mode, no more than 16 + * completion rings are allowed. */ - uint16_t target_id; + uint8_t int_mode; + /* Legacy INTA */ + #define HWRM_RING_ALLOC_INPUT_INT_MODE_LEGACY UINT32_C(0x0) + /* Reserved */ + #define HWRM_RING_ALLOC_INPUT_INT_MODE_RSVD UINT32_C(0x1) + /* MSI-X */ + #define HWRM_RING_ALLOC_INPUT_INT_MODE_MSIX UINT32_C(0x2) + /* No Interrupt - Polled mode */ + #define HWRM_RING_ALLOC_INPUT_INT_MODE_POLL UINT32_C(0x3) + #define HWRM_RING_ALLOC_INPUT_INT_MODE_LAST \ + HWRM_RING_ALLOC_INPUT_INT_MODE_POLL + uint8_t unused_4[3]; /* - * A physical address pointer pointing to a host buffer that the - * command's response data will be written. This can be either a host - * physical address (HPA) or a guest physical address (GPA) and must - * point to a physically contiguous block of memory. + * The cq_handle is specified when allocating a completion ring. For + * devices that support NQs, this cq_handle will be included in the + * NQE to specify which CQ should be read to retrieve the completion + * record. */ - uint64_t resp_addr; - /* Port ID of port whose LED configuration is being queried. */ - uint16_t port_id; - uint8_t unused_0[6]; -} __attribute__((packed)); + uint64_t cq_handle; +} __rte_packed; -/* hwrm_port_led_qcfg_output (size:448b/56B) */ -struct hwrm_port_led_qcfg_output { +/* hwrm_ring_alloc_output (size:128b/16B) */ +struct hwrm_ring_alloc_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -14310,251 +27187,91 @@ struct hwrm_port_led_qcfg_output { /* The length of the response data in number of bytes. */ uint16_t resp_len; /* - * The number of LEDs that are configured on this port. - * Up to 4 LEDs can be returned in the response. - */ - uint8_t num_leds; - /* An identifier for the LED #0. */ - uint8_t led0_id; - /* The type of LED #0. */ - uint8_t led0_type; - /* Speed LED */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_SPEED UINT32_C(0x0) - /* Activity LED */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_ACTIVITY UINT32_C(0x1) - /* Invalid */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_INVALID UINT32_C(0xff) - #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_LAST \ - HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_INVALID - /* The current state of the LED #0. */ - uint8_t led0_state; - /* Default state of the LED */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_DEFAULT UINT32_C(0x0) - /* Off */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_OFF UINT32_C(0x1) - /* On */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_ON UINT32_C(0x2) - /* Blink */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_BLINK UINT32_C(0x3) - /* Blink Alternately */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_BLINKALT UINT32_C(0x4) - #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_LAST \ - HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_BLINKALT - /* The color of LED #0. */ - uint8_t led0_color; - /* Default */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_DEFAULT UINT32_C(0x0) - /* Amber */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_AMBER UINT32_C(0x1) - /* Green */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_GREEN UINT32_C(0x2) - /* Green or Amber */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_GREENAMBER UINT32_C(0x3) - #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_LAST \ - HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_GREENAMBER - uint8_t unused_0; - /* - * If the LED #0 state is "blink" or "blinkalt", then - * this field represents the requested time in milliseconds - * to keep LED on between cycles. - */ - uint16_t led0_blink_on; - /* - * If the LED #0 state is "blink" or "blinkalt", then - * this field represents the requested time in milliseconds - * to keep LED off between cycles. - */ - uint16_t led0_blink_off; - /* - * An identifier for the group of LEDs that LED #0 belongs - * to. - * If set to 0, then the LED #0 is not grouped. - * For all other non-zero values of this field, LED #0 is - * grouped together with the LEDs with the same group ID - * value. - */ - uint8_t led0_group_id; - /* An identifier for the LED #1. */ - uint8_t led1_id; - /* The type of LED #1. */ - uint8_t led1_type; - /* Speed LED */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_SPEED UINT32_C(0x0) - /* Activity LED */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_ACTIVITY UINT32_C(0x1) - /* Invalid */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_INVALID UINT32_C(0xff) - #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_LAST \ - HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_INVALID - /* The current state of the LED #1. */ - uint8_t led1_state; - /* Default state of the LED */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_DEFAULT UINT32_C(0x0) - /* Off */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_OFF UINT32_C(0x1) - /* On */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_ON UINT32_C(0x2) - /* Blink */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_BLINK UINT32_C(0x3) - /* Blink Alternately */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_BLINKALT UINT32_C(0x4) - #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_LAST \ - HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_BLINKALT - /* The color of LED #1. */ - uint8_t led1_color; - /* Default */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_DEFAULT UINT32_C(0x0) - /* Amber */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_AMBER UINT32_C(0x1) - /* Green */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_GREEN UINT32_C(0x2) - /* Green or Amber */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_GREENAMBER UINT32_C(0x3) - #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_LAST \ - HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_GREENAMBER - uint8_t unused_1; - /* - * If the LED #1 state is "blink" or "blinkalt", then - * this field represents the requested time in milliseconds - * to keep LED on between cycles. - */ - uint16_t led1_blink_on; - /* - * If the LED #1 state is "blink" or "blinkalt", then - * this field represents the requested time in milliseconds - * to keep LED off between cycles. - */ - uint16_t led1_blink_off; - /* - * An identifier for the group of LEDs that LED #1 belongs - * to. - * If set to 0, then the LED #1 is not grouped. - * For all other non-zero values of this field, LED #1 is - * grouped together with the LEDs with the same group ID - * value. - */ - uint8_t led1_group_id; - /* An identifier for the LED #2. */ - uint8_t led2_id; - /* The type of LED #2. */ - uint8_t led2_type; - /* Speed LED */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_SPEED UINT32_C(0x0) - /* Activity LED */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_ACTIVITY UINT32_C(0x1) - /* Invalid */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_INVALID UINT32_C(0xff) - #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_LAST \ - HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_INVALID - /* The current state of the LED #2. */ - uint8_t led2_state; - /* Default state of the LED */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_DEFAULT UINT32_C(0x0) - /* Off */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_OFF UINT32_C(0x1) - /* On */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_ON UINT32_C(0x2) - /* Blink */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_BLINK UINT32_C(0x3) - /* Blink Alternately */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_BLINKALT UINT32_C(0x4) - #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_LAST \ - HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_BLINKALT - /* The color of LED #2. */ - uint8_t led2_color; - /* Default */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_DEFAULT UINT32_C(0x0) - /* Amber */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_AMBER UINT32_C(0x1) - /* Green */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_GREEN UINT32_C(0x2) - /* Green or Amber */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_GREENAMBER UINT32_C(0x3) - #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_LAST \ - HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_GREENAMBER - uint8_t unused_2; - /* - * If the LED #2 state is "blink" or "blinkalt", then - * this field represents the requested time in milliseconds - * to keep LED on between cycles. + * Physical number of ring allocated. + * This value shall be unique for a ring type. */ - uint16_t led2_blink_on; + uint16_t ring_id; + /* Logical number of ring allocated. */ + uint16_t logical_ring_id; + uint8_t unused_0[3]; /* - * If the LED #2 state is "blink" or "blinkalt", then - * this field represents the requested time in milliseconds - * to keep LED off between cycles. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - uint16_t led2_blink_off; + uint8_t valid; +} __rte_packed; + +/****************** + * hwrm_ring_free * + ******************/ + + +/* hwrm_ring_free_input (size:192b/24B) */ +struct hwrm_ring_free_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * An identifier for the group of LEDs that LED #2 belongs - * to. - * If set to 0, then the LED #2 is not grouped. - * For all other non-zero values of this field, LED #2 is - * grouped together with the LEDs with the same group ID - * value. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - uint8_t led2_group_id; - /* An identifier for the LED #3. */ - uint8_t led3_id; - /* The type of LED #3. */ - uint8_t led3_type; - /* Speed LED */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_SPEED UINT32_C(0x0) - /* Activity LED */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_ACTIVITY UINT32_C(0x1) - /* Invalid */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_INVALID UINT32_C(0xff) - #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_LAST \ - HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_INVALID - /* The current state of the LED #3. */ - uint8_t led3_state; - /* Default state of the LED */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_DEFAULT UINT32_C(0x0) - /* Off */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_OFF UINT32_C(0x1) - /* On */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_ON UINT32_C(0x2) - /* Blink */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_BLINK UINT32_C(0x3) - /* Blink Alternately */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_BLINKALT UINT32_C(0x4) - #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_LAST \ - HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_BLINKALT - /* The color of LED #3. */ - uint8_t led3_color; - /* Default */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_DEFAULT UINT32_C(0x0) - /* Amber */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_AMBER UINT32_C(0x1) - /* Green */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_GREEN UINT32_C(0x2) - /* Green or Amber */ - #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_GREENAMBER UINT32_C(0x3) - #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_LAST \ - HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_GREENAMBER - uint8_t unused_3; + uint16_t cmpl_ring; /* - * If the LED #3 state is "blink" or "blinkalt", then - * this field represents the requested time in milliseconds - * to keep LED on between cycles. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - uint16_t led3_blink_on; + uint16_t seq_id; /* - * If the LED #3 state is "blink" or "blinkalt", then - * this field represents the requested time in milliseconds - * to keep LED off between cycles. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - uint16_t led3_blink_off; + uint16_t target_id; /* - * An identifier for the group of LEDs that LED #3 belongs - * to. - * If set to 0, then the LED #3 is not grouped. - * For all other non-zero values of this field, LED #3 is - * grouped together with the LEDs with the same group ID - * value. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - uint8_t led3_group_id; - uint8_t unused_4[6]; + uint64_t resp_addr; + /* Ring Type. */ + uint8_t ring_type; + /* L2 Completion Ring (CR) */ + #define HWRM_RING_FREE_INPUT_RING_TYPE_L2_CMPL UINT32_C(0x0) + /* TX Ring (TR) */ + #define HWRM_RING_FREE_INPUT_RING_TYPE_TX UINT32_C(0x1) + /* RX Ring (RR) */ + #define HWRM_RING_FREE_INPUT_RING_TYPE_RX UINT32_C(0x2) + /* RoCE Notification Completion Ring (ROCE_CR) */ + #define HWRM_RING_FREE_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3) + /* RX Aggregation Ring */ + #define HWRM_RING_FREE_INPUT_RING_TYPE_RX_AGG UINT32_C(0x4) + /* Notification Queue */ + #define HWRM_RING_FREE_INPUT_RING_TYPE_NQ UINT32_C(0x5) + #define HWRM_RING_FREE_INPUT_RING_TYPE_LAST \ + HWRM_RING_FREE_INPUT_RING_TYPE_NQ + uint8_t unused_0; + /* Physical number of ring allocated. */ + uint16_t ring_id; + uint8_t unused_1[4]; +} __rte_packed; + +/* hwrm_ring_free_output (size:128b/16B) */ +struct hwrm_ring_free_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -14563,15 +27280,15 @@ struct hwrm_port_led_qcfg_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/*********************** - * hwrm_port_led_qcaps * - ***********************/ +/******************* + * hwrm_ring_reset * + *******************/ -/* hwrm_port_led_qcaps_input (size:192b/24B) */ -struct hwrm_port_led_qcaps_input { +/* hwrm_ring_reset_input (size:192b/24B) */ +struct hwrm_ring_reset_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -14588,7 +27305,8 @@ struct hwrm_port_led_qcaps_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -14599,13 +27317,35 @@ struct hwrm_port_led_qcaps_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* Port ID of port whose LED configuration is being queried. */ - uint16_t port_id; - uint8_t unused_0[6]; -} __attribute__((packed)); + /* Ring Type. */ + uint8_t ring_type; + /* L2 Completion Ring (CR) */ + #define HWRM_RING_RESET_INPUT_RING_TYPE_L2_CMPL UINT32_C(0x0) + /* TX Ring (TR) */ + #define HWRM_RING_RESET_INPUT_RING_TYPE_TX UINT32_C(0x1) + /* RX Ring (RR) */ + #define HWRM_RING_RESET_INPUT_RING_TYPE_RX UINT32_C(0x2) + /* RoCE Notification Completion Ring (ROCE_CR) */ + #define HWRM_RING_RESET_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3) + /* + * Rx Ring Group. This is to reset rx and aggregation in an atomic + * operation. Completion ring associated with this ring group is + * not reset. + */ + #define HWRM_RING_RESET_INPUT_RING_TYPE_RX_RING_GRP UINT32_C(0x6) + #define HWRM_RING_RESET_INPUT_RING_TYPE_LAST \ + HWRM_RING_RESET_INPUT_RING_TYPE_RX_RING_GRP + uint8_t unused_0; + /* + * Physical number of the ring. When ring type is rx_ring_grp, ring id + * actually refers to ring group id. + */ + uint16_t ring_id; + uint8_t unused_1[4]; +} __rte_packed; -/* hwrm_port_led_qcaps_output (size:384b/48B) */ -struct hwrm_port_led_qcaps_output { +/* hwrm_ring_reset_output (size:128b/16B) */ +struct hwrm_ring_reset_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -14614,298 +27354,443 @@ struct hwrm_port_led_qcaps_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; + uint8_t unused_0[4]; + /* Position of consumer index after ring reset completes. */ + uint8_t consumer_idx[3]; /* - * The number of LEDs that are configured on this port. - * Up to 4 LEDs can be returned in the response. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - uint8_t num_leds; - /* Reserved for future use. */ - uint8_t unused[3]; - /* An identifier for the LED #0. */ - uint8_t led0_id; - /* The type of LED #0. */ - uint8_t led0_type; - /* Speed LED */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_SPEED UINT32_C(0x0) - /* Activity LED */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_ACTIVITY UINT32_C(0x1) - /* Invalid */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_INVALID UINT32_C(0xff) - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_LAST \ - HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_INVALID + uint8_t valid; +} __rte_packed; + +/***************** + * hwrm_ring_cfg * + *****************/ + + +/* hwrm_ring_cfg_input (size:256b/32B) */ +struct hwrm_ring_cfg_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * An identifier for the group of LEDs that LED #0 belongs - * to. - * If set to 0, then the LED #0 cannot be grouped. - * For all other non-zero values of this field, LED #0 is - * grouped together with the LEDs with the same group ID - * value. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - uint8_t led0_group_id; - uint8_t unused_0; - /* The states supported by LED #0. */ - uint16_t led0_state_caps; + uint16_t cmpl_ring; /* - * If set to 1, this LED is enabled. - * If set to 0, this LED is disabled. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_ENABLED \ - UINT32_C(0x1) + uint16_t seq_id; /* - * If set to 1, off state is supported on this LED. - * If set to 0, off state is not supported on this LED. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_OFF_SUPPORTED \ - UINT32_C(0x2) + uint16_t target_id; /* - * If set to 1, on state is supported on this LED. - * If set to 0, on state is not supported on this LED. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_ON_SUPPORTED \ - UINT32_C(0x4) + uint64_t resp_addr; + /* Ring Type. */ + uint8_t ring_type; + /* TX Ring (TR) */ + #define HWRM_RING_CFG_INPUT_RING_TYPE_TX UINT32_C(0x1) + /* RX Ring (RR) */ + #define HWRM_RING_CFG_INPUT_RING_TYPE_RX UINT32_C(0x2) + #define HWRM_RING_CFG_INPUT_RING_TYPE_LAST \ + HWRM_RING_CFG_INPUT_RING_TYPE_RX + uint8_t unused_0; + /* Physical number of the ring. */ + uint16_t ring_id; + /* Ring config enable bits. */ + uint16_t enables; /* - * If set to 1, blink state is supported on this LED. - * If set to 0, blink state is not supported on this LED. + * For Rx rings, the incoming packet data can be placed at either + * a 0B, 2B, 10B or 12B offset from the start of the Rx packet + * buffer. + * When '1', the received packet will be padded with 2B, 10B or 12B + * of zeros at the front of the packet. The exact offset is specified + * by rx_sop_pad_bytes parameter. + * When '0', the received packet will not be padded. + * Note that this flag is only used for Rx rings and is ignored + * for all other rings included Rx Aggregation rings. + */ + #define HWRM_RING_CFG_INPUT_ENABLES_RX_SOP_PAD_ENABLE \ + UINT32_C(0x1) + /* + * Proxy mode enable, for Tx, Rx and Rx aggregation rings only. + * When rings are allocated, the PCI function on which driver issues + * HWRM_RING_CFG command is assumed to own the rings. Hardware takes + * the buffer descriptors (BDs) from those rings is assumed to issue + * packet payload DMA using same PCI function. When proxy mode is + * enabled, hardware can perform payload DMA using another PCI + * function on same or different host. + * When set to '0', the PCI function on which driver issues + * HWRM_RING_CFG command is used for host payload DMA operation. + * When set to '1', the host PCI function specified by proxy_fid is + * used for host payload DMA operation. + */ + #define HWRM_RING_CFG_INPUT_ENABLES_PROXY_MODE_ENABLE \ + UINT32_C(0x2) + /* + * Tx ring packet source interface override, for Tx rings only. + * When TX rings are allocated, the PCI function on which driver + * issues HWRM_RING_CFG is assumed to be source interface of + * packets sent from TX ring. + * When set to '1', the host PCI function specified by proxy_fid + * is used as source interface of the transmitted packets. */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_BLINK_SUPPORTED \ + #define HWRM_RING_CFG_INPUT_ENABLES_TX_PROXY_SRC_INTF_OVERRIDE \ + UINT32_C(0x4) + /* The sq_id field is valid */ + #define HWRM_RING_CFG_INPUT_ENABLES_SQ_ID \ UINT32_C(0x8) + /* Update completion ring ID associated with Tx or Rx ring. */ + #define HWRM_RING_CFG_INPUT_ENABLES_CMPL_RING_ID_UPDATE \ + UINT32_C(0x10) /* - * If set to 1, blink_alt state is supported on this LED. - * If set to 0, blink_alt state is not supported on this LED. + * Proxy function FID value. + * This value is only used when either proxy_mode_enable flag or + * tx_proxy_svif_override is set to '1'. + * When proxy_mode_enable is set to '1', it identifies a host PCI + * function used for host payload DMA operations. + * When tx_proxy_src_intf is set to '1', it identifies a host PCI + * function as source interface for all transmitted packets from + * the TX ring. */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_BLINK_ALT_SUPPORTED \ - UINT32_C(0x10) - /* The colors supported by LED #0. */ - uint16_t led0_color_caps; - /* reserved. */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_RSVD \ - UINT32_C(0x1) + uint16_t proxy_fid; /* - * If set to 1, Amber color is supported on this LED. - * If set to 0, Amber color is not supported on this LED. + * Identifies the new scheduler queue (SQ) to associate with the ring. + * Only valid for Tx rings. + * A value of zero indicates that the Tx ring should be associated + * with the default scheduler queue (SQ). */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_AMBER_SUPPORTED \ - UINT32_C(0x2) + uint16_t sq_id; /* - * If set to 1, Green color is supported on this LED. - * If set to 0, Green color is not supported on this LED. + * This field is valid for TX or Rx rings. This value identifies the + * new completion ring ID to associate with the TX or Rx ring. */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_GREEN_SUPPORTED \ - UINT32_C(0x4) - /* An identifier for the LED #1. */ - uint8_t led1_id; - /* The type of LED #1. */ - uint8_t led1_type; - /* Speed LED */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_SPEED UINT32_C(0x0) - /* Activity LED */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_ACTIVITY UINT32_C(0x1) - /* Invalid */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_INVALID UINT32_C(0xff) - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_LAST \ - HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_INVALID + uint16_t cmpl_ring_id; /* - * An identifier for the group of LEDs that LED #1 belongs - * to. - * If set to 0, then the LED #0 cannot be grouped. - * For all other non-zero values of this field, LED #0 is - * grouped together with the LEDs with the same group ID - * value. + * Rx SOP padding amount in bytes. + * This value is only used when rx_sop_pad_enable flag is set to '1'. */ - uint8_t led1_group_id; - uint8_t unused_1; - /* The states supported by LED #1. */ - uint16_t led1_state_caps; + uint8_t rx_sop_pad_bytes; + uint8_t unused_1[3]; +} __rte_packed; + +/* hwrm_ring_cfg_output (size:128b/16B) */ +struct hwrm_ring_cfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; /* - * If set to 1, this LED is enabled. - * If set to 0, this LED is disabled. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal + * processor, the order of writes has to be such that this field is + * written last. */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_ENABLED \ - UINT32_C(0x1) + uint8_t valid; +} __rte_packed; + +/****************** + * hwrm_ring_qcfg * + ******************/ + + +/* hwrm_ring_qcfg_input (size:192b/24B) */ +struct hwrm_ring_qcfg_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * If set to 1, off state is supported on this LED. - * If set to 0, off state is not supported on this LED. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_OFF_SUPPORTED \ - UINT32_C(0x2) + uint16_t cmpl_ring; /* - * If set to 1, on state is supported on this LED. - * If set to 0, on state is not supported on this LED. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_ON_SUPPORTED \ - UINT32_C(0x4) + uint16_t seq_id; /* - * If set to 1, blink state is supported on this LED. - * If set to 0, blink state is not supported on this LED. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_BLINK_SUPPORTED \ - UINT32_C(0x8) + uint16_t target_id; /* - * If set to 1, blink_alt state is supported on this LED. - * If set to 0, blink_alt state is not supported on this LED. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_BLINK_ALT_SUPPORTED \ - UINT32_C(0x10) - /* The colors supported by LED #1. */ - uint16_t led1_color_caps; - /* reserved. */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_RSVD \ + uint64_t resp_addr; + /* Ring Type. */ + uint8_t ring_type; + /* TX Ring (TR) */ + #define HWRM_RING_QCFG_INPUT_RING_TYPE_TX UINT32_C(0x1) + /* RX Ring (RR) */ + #define HWRM_RING_QCFG_INPUT_RING_TYPE_RX UINT32_C(0x2) + #define HWRM_RING_QCFG_INPUT_RING_TYPE_LAST \ + HWRM_RING_QCFG_INPUT_RING_TYPE_RX + uint8_t unused_0[5]; + /* Physical number of the ring. */ + uint16_t ring_id; +} __rte_packed; + +/* hwrm_ring_qcfg_output (size:192b/24B) */ +struct hwrm_ring_qcfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* Ring config enable bits. */ + uint16_t enables; + /* + * For Rx rings, the incoming packet data can be placed at either + * a 0B, 2B, 10B or 12B offset from the start of the Rx packet + * buffer. + * When '1', the received packet will be padded with 2B, 10B or 12B + * of zeros at the front of the packet. The exact offset is specified + * by rx_sop_pad_bytes parameter. + * When '0', the received packet will not be padded. + * Note that this flag is only used for Rx rings and is ignored + * for all other rings included Rx Aggregation rings. + */ + #define HWRM_RING_QCFG_OUTPUT_ENABLES_RX_SOP_PAD_ENABLE \ UINT32_C(0x1) /* - * If set to 1, Amber color is supported on this LED. - * If set to 0, Amber color is not supported on this LED. - */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_AMBER_SUPPORTED \ + * Proxy mode enable, for Tx, Rx and Rx aggregation rings only. + * When rings are allocated, the PCI function on which driver issues + * HWRM_RING_CFG command is assumed to own the rings. Hardware takes + * the buffer descriptors (BDs) from those rings is assumed to issue + * packet payload DMA using same PCI function. When proxy mode is + * enabled, hardware can perform payload DMA using another PCI + * function on same or different host. + * When set to '0', the PCI function on which driver issues + * HWRM_RING_CFG command is used for host payload DMA operation. + * When set to '1', the host PCI function specified by proxy_fid is + * used for host payload DMA operation. + */ + #define HWRM_RING_QCFG_OUTPUT_ENABLES_PROXY_MODE_ENABLE \ UINT32_C(0x2) /* - * If set to 1, Green color is supported on this LED. - * If set to 0, Green color is not supported on this LED. + * Tx ring packet source interface override, for Tx rings only. + * When TX rings are allocated, the PCI function on which driver + * issues HWRM_RING_CFG is assumed to be source interface of + * packets sent from TX ring. + * When set to '1', the host PCI function specified by proxy_fid is + * used as source interface of the transmitted packets. */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_GREEN_SUPPORTED \ + #define HWRM_RING_QCFG_OUTPUT_ENABLES_TX_PROXY_SRC_INTF_OVERRIDE \ UINT32_C(0x4) - /* An identifier for the LED #2. */ - uint8_t led2_id; - /* The type of LED #2. */ - uint8_t led2_type; - /* Speed LED */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_SPEED UINT32_C(0x0) - /* Activity LED */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_ACTIVITY UINT32_C(0x1) - /* Invalid */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_INVALID UINT32_C(0xff) - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_LAST \ - HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_INVALID /* - * An identifier for the group of LEDs that LED #0 belongs - * to. - * If set to 0, then the LED #0 cannot be grouped. - * For all other non-zero values of this field, LED #0 is - * grouped together with the LEDs with the same group ID - * value. + * Proxy function FID value. + * This value is only used when either proxy_mode_enable flag or + * tx_proxy_svif_override is set to '1'. + * When proxy_mode_enable is set to '1', it identifies a host PCI + * function used for host payload DMA operations. + * When tx_proxy_src_intf is set to '1', it identifies a host PCI + * function as source interface for all transmitted packets from the TX + * ring. */ - uint8_t led2_group_id; - uint8_t unused_2; - /* The states supported by LED #2. */ - uint16_t led2_state_caps; + uint16_t proxy_fid; /* - * If set to 1, this LED is enabled. - * If set to 0, this LED is disabled. + * Identifies the new scheduler queue (SQ) to associate with the ring. + * Only valid for Tx rings. + * A value of zero indicates that the Tx ring should be associated with + * the default scheduler queue (SQ). */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_ENABLED \ - UINT32_C(0x1) + uint16_t sq_id; /* - * If set to 1, off state is supported on this LED. - * If set to 0, off state is not supported on this LED. + * This field is used when ring_type is a TX or Rx ring. + * This value indicates what completion ring the TX or Rx ring + * is associated with. */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_OFF_SUPPORTED \ - UINT32_C(0x2) + uint16_t cmpl_ring_id; /* - * If set to 1, on state is supported on this LED. - * If set to 0, on state is not supported on this LED. + * Rx SOP padding amount in bytes. + * This value is only used when rx_sop_pad_enable flag is set to '1'. */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_ON_SUPPORTED \ - UINT32_C(0x4) + uint8_t rx_sop_pad_bytes; + uint8_t unused_0[6]; /* - * If set to 1, blink state is supported on this LED. - * If set to 0, blink state is not supported on this LED. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal + * processor, the order of writes has to be such that this field is + * written last. */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_BLINK_SUPPORTED \ - UINT32_C(0x8) + uint8_t valid; +} __rte_packed; + +/************************** + * hwrm_ring_aggint_qcaps * + **************************/ + + +/* hwrm_ring_aggint_qcaps_input (size:128b/16B) */ +struct hwrm_ring_aggint_qcaps_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * If set to 1, blink_alt state is supported on this LED. - * If set to 0, blink_alt state is not supported on this LED. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_BLINK_ALT_SUPPORTED \ - UINT32_C(0x10) - /* The colors supported by LED #2. */ - uint16_t led2_color_caps; - /* reserved. */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_RSVD \ - UINT32_C(0x1) + uint16_t cmpl_ring; /* - * If set to 1, Amber color is supported on this LED. - * If set to 0, Amber color is not supported on this LED. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_AMBER_SUPPORTED \ - UINT32_C(0x2) + uint16_t seq_id; /* - * If set to 1, Green color is supported on this LED. - * If set to 0, Green color is not supported on this LED. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_GREEN_SUPPORTED \ - UINT32_C(0x4) - /* An identifier for the LED #3. */ - uint8_t led3_id; - /* The type of LED #3. */ - uint8_t led3_type; - /* Speed LED */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_SPEED UINT32_C(0x0) - /* Activity LED */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_ACTIVITY UINT32_C(0x1) - /* Invalid */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_INVALID UINT32_C(0xff) - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_LAST \ - HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_INVALID + uint16_t target_id; /* - * An identifier for the group of LEDs that LED #3 belongs - * to. - * If set to 0, then the LED #0 cannot be grouped. - * For all other non-zero values of this field, LED #0 is - * grouped together with the LEDs with the same group ID - * value. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - uint8_t led3_group_id; - uint8_t unused_3; - /* The states supported by LED #3. */ - uint16_t led3_state_caps; + uint64_t resp_addr; +} __rte_packed; + +/* hwrm_ring_aggint_qcaps_output (size:384b/48B) */ +struct hwrm_ring_aggint_qcaps_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint32_t cmpl_params; /* - * If set to 1, this LED is enabled. - * If set to 0, this LED is disabled. + * When this bit is set to '1', int_lat_tmr_min can be configured + * on completion rings. */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_ENABLED \ + #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_INT_LAT_TMR_MIN \ UINT32_C(0x1) /* - * If set to 1, off state is supported on this LED. - * If set to 0, off state is not supported on this LED. + * When this bit is set to '1', int_lat_tmr_max can be configured + * on completion rings. */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_OFF_SUPPORTED \ + #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_INT_LAT_TMR_MAX \ UINT32_C(0x2) /* - * If set to 1, on state is supported on this LED. - * If set to 0, on state is not supported on this LED. + * When this bit is set to '1', timer_reset can be enabled + * on completion rings. */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_ON_SUPPORTED \ + #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_TIMER_RESET \ UINT32_C(0x4) /* - * If set to 1, blink state is supported on this LED. - * If set to 0, blink state is not supported on this LED. + * When this bit is set to '1', ring_idle can be enabled + * on completion rings. */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_BLINK_SUPPORTED \ + #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_RING_IDLE \ UINT32_C(0x8) /* - * If set to 1, blink_alt state is supported on this LED. - * If set to 0, blink_alt state is not supported on this LED. + * When this bit is set to '1', num_cmpl_dma_aggr can be configured + * on completion rings. */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_BLINK_ALT_SUPPORTED \ + #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_NUM_CMPL_DMA_AGGR \ UINT32_C(0x10) - /* The colors supported by LED #3. */ - uint16_t led3_color_caps; - /* reserved. */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_RSVD \ - UINT32_C(0x1) /* - * If set to 1, Amber color is supported on this LED. - * If set to 0, Amber color is not supported on this LED. + * When this bit is set to '1', num_cmpl_dma_aggr_during_int can be configured + * on completion rings. */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_AMBER_SUPPORTED \ - UINT32_C(0x2) + #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_NUM_CMPL_DMA_AGGR_DURING_INT \ + UINT32_C(0x20) /* - * If set to 1, Green color is supported on this LED. - * If set to 0, Green color is not supported on this LED. + * When this bit is set to '1', cmpl_aggr_dma_tmr can be configured + * on completion rings. */ - #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_GREEN_SUPPORTED \ - UINT32_C(0x4) - uint8_t unused_4[3]; + #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_CMPL_AGGR_DMA_TMR \ + UINT32_C(0x40) + /* + * When this bit is set to '1', cmpl_aggr_dma_tmr_during_int can be configured + * on completion rings. + */ + #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_CMPL_AGGR_DMA_TMR_DURING_INT \ + UINT32_C(0x80) + /* + * When this bit is set to '1', num_cmpl_aggr_int can be configured + * on completion rings. + */ + #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_NUM_CMPL_AGGR_INT \ + UINT32_C(0x100) + uint32_t nq_params; + /* + * When this bit is set to '1', int_lat_tmr_min can be configured + * on notification queues. + */ + #define HWRM_RING_AGGINT_QCAPS_OUTPUT_NQ_PARAMS_INT_LAT_TMR_MIN \ + UINT32_C(0x1) + /* Minimum value for num_cmpl_dma_aggr */ + uint16_t num_cmpl_dma_aggr_min; + /* Maximum value for num_cmpl_dma_aggr */ + uint16_t num_cmpl_dma_aggr_max; + /* Minimum value for num_cmpl_dma_aggr_during_int */ + uint16_t num_cmpl_dma_aggr_during_int_min; + /* Maximum value for num_cmpl_dma_aggr_during_int */ + uint16_t num_cmpl_dma_aggr_during_int_max; + /* Minimum value for cmpl_aggr_dma_tmr */ + uint16_t cmpl_aggr_dma_tmr_min; + /* Maximum value for cmpl_aggr_dma_tmr */ + uint16_t cmpl_aggr_dma_tmr_max; + /* Minimum value for cmpl_aggr_dma_tmr_during_int */ + uint16_t cmpl_aggr_dma_tmr_during_int_min; + /* Maximum value for cmpl_aggr_dma_tmr_during_int */ + uint16_t cmpl_aggr_dma_tmr_during_int_max; + /* Minimum value for int_lat_tmr_min */ + uint16_t int_lat_tmr_min_min; + /* Maximum value for int_lat_tmr_min */ + uint16_t int_lat_tmr_min_max; + /* Minimum value for int_lat_tmr_max */ + uint16_t int_lat_tmr_max_min; + /* Maximum value for int_lat_tmr_max */ + uint16_t int_lat_tmr_max_max; + /* Minimum value for num_cmpl_aggr_int */ + uint16_t num_cmpl_aggr_int_min; + /* Maximum value for num_cmpl_aggr_int */ + uint16_t num_cmpl_aggr_int_max; + /* The units for timer parameters, in nanoseconds. */ + uint16_t timer_units; + uint8_t unused_0[1]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -14914,15 +27799,15 @@ struct hwrm_port_led_qcaps_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/*********************** - * hwrm_queue_qportcfg * - ***********************/ +/************************************** + * hwrm_ring_cmpl_ring_qaggint_params * + **************************************/ -/* hwrm_queue_qportcfg_input (size:192b/24B) */ -struct hwrm_queue_qportcfg_input { +/* hwrm_ring_cmpl_ring_qaggint_params_input (size:192b/24B) */ +struct hwrm_ring_cmpl_ring_qaggint_params_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -14939,7 +27824,8 @@ struct hwrm_queue_qportcfg_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -14950,40 +27836,24 @@ struct hwrm_queue_qportcfg_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - uint32_t flags; - /* - * Enumeration denoting the RX, TX type of the resource. - * This enumeration is used for resources that are similar for both - * TX and RX paths of the chip. - */ - #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH UINT32_C(0x1) - /* tx path */ - #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0) - /* rx path */ - #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1) - #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_LAST \ - HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX - /* - * Port ID of port for which the queue configuration is being - * queried. This field is only required when sent by IPC. - */ - uint16_t port_id; + /* Physical number of completion ring. */ + uint16_t ring_id; + uint16_t flags; + #define HWRM_RING_CMPL_RING_QAGGINT_PARAMS_INPUT_FLAGS_UNUSED_0_MASK \ + UINT32_C(0x3) + #define HWRM_RING_CMPL_RING_QAGGINT_PARAMS_INPUT_FLAGS_UNUSED_0_SFT 0 /* - * Drivers will set this capability when it can use - * queue_idx_service_profile to map the queues to application. + * Set this flag to 1 when querying parameters on a notification + * queue. Set this flag to 0 when querying parameters on a + * completion queue or completion ring. */ - uint8_t drv_qmap_cap; - /* disabled */ - #define HWRM_QUEUE_QPORTCFG_INPUT_DRV_QMAP_CAP_DISABLED UINT32_C(0x0) - /* enabled */ - #define HWRM_QUEUE_QPORTCFG_INPUT_DRV_QMAP_CAP_ENABLED UINT32_C(0x1) - #define HWRM_QUEUE_QPORTCFG_INPUT_DRV_QMAP_CAP_LAST \ - HWRM_QUEUE_QPORTCFG_INPUT_DRV_QMAP_CAP_ENABLED - uint8_t unused_0; -} __attribute__((packed)); + #define HWRM_RING_CMPL_RING_QAGGINT_PARAMS_INPUT_FLAGS_IS_NQ \ + UINT32_C(0x4) + uint8_t unused_0[4]; +} __rte_packed; -/* hwrm_queue_qportcfg_output (size:256b/32B) */ -struct hwrm_queue_qportcfg_output { +/* hwrm_ring_cmpl_ring_qaggint_params_output (size:256b/32B) */ +struct hwrm_ring_cmpl_ring_qaggint_params_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -14992,372 +27862,210 @@ struct hwrm_queue_qportcfg_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; + uint16_t flags; /* - * The maximum number of queues that can be configured on this - * port. - * Valid values range from 1 through 8. + * When this bit is set to '1', interrupt max + * timer is reset whenever a completion is received. */ - uint8_t max_configurable_queues; + #define HWRM_RING_CMPL_RING_QAGGINT_PARAMS_OUTPUT_FLAGS_TIMER_RESET \ + UINT32_C(0x1) /* - * The maximum number of lossless queues that can be configured - * on this port. - * Valid values range from 0 through 8. + * When this bit is set to '1', ring idle mode + * aggregation will be enabled. */ - uint8_t max_configurable_lossless_queues; + #define HWRM_RING_CMPL_RING_QAGGINT_PARAMS_OUTPUT_FLAGS_RING_IDLE \ + UINT32_C(0x2) /* - * Bitmask indicating which queues can be configured by the - * hwrm_queue_cfg command. - * - * Each bit represents a specific queue where bit 0 represents - * queue 0 and bit 7 represents queue 7. - * # A value of 0 indicates that the queue is not configurable - * by the hwrm_queue_cfg command. - * # A value of 1 indicates that the queue is configurable. - * # A hwrm_queue_cfg command shall return error when trying to - * configure a queue not configurable. + * Number of completions to aggregate before DMA + * during the normal mode. */ - uint8_t queue_cfg_allowed; - /* Information about queue configuration. */ - uint8_t queue_cfg_info; + uint16_t num_cmpl_dma_aggr; /* - * If this flag is set to '1', then the queues are - * configured asymmetrically on TX and RX sides. - * If this flag is set to '0', then the queues are - * configured symmetrically on TX and RX sides. For - * symmetric configuration, the queue configuration - * including queue ids and service profiles on the - * TX side is the same as the corresponding queue - * configuration on the RX side. + * Number of completions to aggregate before DMA + * during the interrupt mode. */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_CFG_INFO_ASYM_CFG \ - UINT32_C(0x1) + uint16_t num_cmpl_dma_aggr_during_int; /* - * Bitmask indicating which queues can be configured by the - * hwrm_queue_pfcenable_cfg command. - * - * Each bit represents a specific priority where bit 0 represents - * priority 0 and bit 7 represents priority 7. - * # A value of 0 indicates that the priority is not configurable by - * the hwrm_queue_pfcenable_cfg command. - * # A value of 1 indicates that the priority is configurable. - * # A hwrm_queue_pfcenable_cfg command shall return error when - * trying to configure a priority that is not configurable. + * Timer used to aggregate completions before + * DMA during the normal mode (not in interrupt mode). */ - uint8_t queue_pfcenable_cfg_allowed; + uint16_t cmpl_aggr_dma_tmr; /* - * Bitmask indicating which queues can be configured by the - * hwrm_queue_pri2cos_cfg command. - * - * Each bit represents a specific queue where bit 0 represents - * queue 0 and bit 7 represents queue 7. - * # A value of 0 indicates that the queue is not configurable - * by the hwrm_queue_pri2cos_cfg command. - * # A value of 1 indicates that the queue is configurable. - * # A hwrm_queue_pri2cos_cfg command shall return error when - * trying to configure a queue that is not configurable. + * Timer used to aggregate completions before + * DMA when in interrupt mode. + */ + uint16_t cmpl_aggr_dma_tmr_during_int; + /* Minimum time between two interrupts. */ + uint16_t int_lat_tmr_min; + /* + * Maximum wait time spent aggregating + * completions before signaling the interrupt after the + * interrupt is enabled. + */ + uint16_t int_lat_tmr_max; + /* + * Minimum number of completions aggregated before signaling + * an interrupt. + */ + uint16_t num_cmpl_aggr_int; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/***************************************** + * hwrm_ring_cmpl_ring_cfg_aggint_params * + *****************************************/ + + +/* hwrm_ring_cmpl_ring_cfg_aggint_params_input (size:320b/40B) */ +struct hwrm_ring_cmpl_ring_cfg_aggint_params_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - uint8_t queue_pri2cos_cfg_allowed; + uint16_t seq_id; /* - * Bitmask indicating which queues can be configured by the - * hwrm_queue_pri2cos_cfg command. - * - * Each bit represents a specific queue where bit 0 represents - * queue 0 and bit 7 represents queue 7. - * # A value of 0 indicates that the queue is not configurable - * by the hwrm_queue_pri2cos_cfg command. - * # A value of 1 indicates that the queue is configurable. - * # A hwrm_queue_pri2cos_cfg command shall return error when - * trying to configure a queue not configurable. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - uint8_t queue_cos2bw_cfg_allowed; + uint16_t target_id; /* - * ID of CoS Queue 0. - * FF - Invalid id - * - * # This ID can be used on any subsequent call to an hwrm command - * that takes a queue id. - * # IDs must always be queried by this command before any use - * by the driver or software. - * # Any driver or software should not make any assumptions about - * queue IDs. - * # A value of 0xff indicates that the queue is not available. - * # Available queues may not be in sequential order. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - uint8_t queue_id0; - /* This value is applicable to CoS queues only. */ - uint8_t queue_id0_service_profile; - /* Lossy (best-effort) */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSY \ - UINT32_C(0x0) - /* Lossless (legacy) */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSLESS \ - UINT32_C(0x1) - /* Lossless RoCE */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSLESS_ROCE \ - UINT32_C(0x1) - /* Lossy RoCE CNP */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSY_ROCE_CNP \ - UINT32_C(0x2) - /* Lossless NIC */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSLESS_NIC \ - UINT32_C(0x3) - /* Set to 0xFF... (All Fs) if there is no service profile specified */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_UNKNOWN \ - UINT32_C(0xff) - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LAST \ - HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_UNKNOWN + uint64_t resp_addr; + /* Physical number of completion ring. */ + uint16_t ring_id; + uint16_t flags; /* - * ID of CoS Queue 1. - * FF - Invalid id - * - * # This ID can be used on any subsequent call to an hwrm command - * that takes a queue id. - * # IDs must always be queried by this command before any use - * by the driver or software. - * # Any driver or software should not make any assumptions about - * queue IDs. - * # A value of 0xff indicates that the queue is not available. - * # Available queues may not be in sequential order. + * When this bit is set to '1', interrupt latency max + * timer is reset whenever a completion is received. */ - uint8_t queue_id1; - /* This value is applicable to CoS queues only. */ - uint8_t queue_id1_service_profile; - /* Lossy (best-effort) */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSY \ - UINT32_C(0x0) - /* Lossless (legacy) */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSLESS \ - UINT32_C(0x1) - /* Lossless RoCE */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSLESS_ROCE \ + #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_FLAGS_TIMER_RESET \ UINT32_C(0x1) - /* Lossy RoCE CNP */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSY_ROCE_CNP \ - UINT32_C(0x2) - /* Lossless NIC */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSLESS_NIC \ - UINT32_C(0x3) - /* Set to 0xFF... (All Fs) if there is no service profile specified */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_UNKNOWN \ - UINT32_C(0xff) - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LAST \ - HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_UNKNOWN /* - * ID of CoS Queue 2. - * FF - Invalid id - * - * # This ID can be used on any subsequent call to an hwrm command - * that takes a queue id. - * # IDs must always be queried by this command before any use - * by the driver or software. - * # Any driver or software should not make any assumptions about - * queue IDs. - * # A value of 0xff indicates that the queue is not available. - * # Available queues may not be in sequential order. + * When this bit is set to '1', ring idle mode + * aggregation will be enabled. */ - uint8_t queue_id2; - /* This value is applicable to CoS queues only. */ - uint8_t queue_id2_service_profile; - /* Lossy (best-effort) */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSY \ - UINT32_C(0x0) - /* Lossless (legacy) */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSLESS \ - UINT32_C(0x1) - /* Lossless RoCE */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSLESS_ROCE \ - UINT32_C(0x1) - /* Lossy RoCE CNP */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSY_ROCE_CNP \ + #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_FLAGS_RING_IDLE \ UINT32_C(0x2) - /* Lossless NIC */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSLESS_NIC \ - UINT32_C(0x3) - /* Set to 0xFF... (All Fs) if there is no service profile specified */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_UNKNOWN \ - UINT32_C(0xff) - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LAST \ - HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_UNKNOWN /* - * ID of CoS Queue 3. - * FF - Invalid id - * - * # This ID can be used on any subsequent call to an hwrm command - * that takes a queue id. - * # IDs must always be queried by this command before any use - * by the driver or software. - * # Any driver or software should not make any assumptions about - * queue IDs. - * # A value of 0xff indicates that the queue is not available. - * # Available queues may not be in sequential order. + * Set this flag to 1 when configuring parameters on a + * notification queue. Set this flag to 0 when configuring + * parameters on a completion queue or completion ring. */ - uint8_t queue_id3; - /* This value is applicable to CoS queues only. */ - uint8_t queue_id3_service_profile; - /* Lossy (best-effort) */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSY \ - UINT32_C(0x0) - /* Lossless (legacy) */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSLESS \ - UINT32_C(0x1) - /* Lossless RoCE */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSLESS_ROCE \ - UINT32_C(0x1) - /* Lossy RoCE CNP */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSY_ROCE_CNP \ - UINT32_C(0x2) - /* Lossless NIC */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSLESS_NIC \ - UINT32_C(0x3) - /* Set to 0xFF... (All Fs) if there is no service profile specified */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_UNKNOWN \ - UINT32_C(0xff) - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LAST \ - HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_UNKNOWN + #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_FLAGS_IS_NQ \ + UINT32_C(0x4) /* - * ID of CoS Queue 4. - * FF - Invalid id - * - * # This ID can be used on any subsequent call to an hwrm command - * that takes a queue id. - * # IDs must always be queried by this command before any use - * by the driver or software. - * # Any driver or software should not make any assumptions about - * queue IDs. - * # A value of 0xff indicates that the queue is not available. - * # Available queues may not be in sequential order. + * Number of completions to aggregate before DMA + * during the normal mode. */ - uint8_t queue_id4; - /* This value is applicable to CoS queues only. */ - uint8_t queue_id4_service_profile; - /* Lossy (best-effort) */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSY \ - UINT32_C(0x0) - /* Lossless (legacy) */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSLESS \ - UINT32_C(0x1) - /* Lossless RoCE */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSLESS_ROCE \ - UINT32_C(0x1) - /* Lossy RoCE CNP */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSY_ROCE_CNP \ - UINT32_C(0x2) - /* Lossless NIC */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSLESS_NIC \ - UINT32_C(0x3) - /* Set to 0xFF... (All Fs) if there is no service profile specified */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_UNKNOWN \ - UINT32_C(0xff) - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LAST \ - HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_UNKNOWN + uint16_t num_cmpl_dma_aggr; /* - * ID of CoS Queue 5. - * FF - Invalid id - * - * # This ID can be used on any subsequent call to an hwrm command - * that takes a queue id. - * # IDs must always be queried by this command before any use - * by the driver or software. - * # Any driver or software should not make any assumptions about - * queue IDs. - * # A value of 0xff indicates that the queue is not available. - * # Available queues may not be in sequential order. + * Number of completions to aggregate before DMA + * during the interrupt mode. */ - uint8_t queue_id5; - /* This value is applicable to CoS queues only. */ - uint8_t queue_id5_service_profile; - /* Lossy (best-effort) */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSY \ - UINT32_C(0x0) - /* Lossless (legacy) */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSLESS \ - UINT32_C(0x1) - /* Lossless RoCE */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSLESS_ROCE \ - UINT32_C(0x1) - /* Lossy RoCE CNP */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSY_ROCE_CNP \ - UINT32_C(0x2) - /* Lossless NIC */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSLESS_NIC \ - UINT32_C(0x3) - /* Set to 0xFF... (All Fs) if there is no service profile specified */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_UNKNOWN \ - UINT32_C(0xff) - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LAST \ - HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_UNKNOWN + uint16_t num_cmpl_dma_aggr_during_int; + /* + * Timer used to aggregate completions before + * DMA during the normal mode (not in interrupt mode). + */ + uint16_t cmpl_aggr_dma_tmr; + /* + * Timer used to aggregate completions before + * DMA while in interrupt mode. + */ + uint16_t cmpl_aggr_dma_tmr_during_int; + /* Minimum time between two interrupts. */ + uint16_t int_lat_tmr_min; + /* + * Maximum wait time spent aggregating + * completions before signaling the interrupt after the + * interrupt is enabled. + */ + uint16_t int_lat_tmr_max; /* - * ID of CoS Queue 6. - * FF - Invalid id - * - * # This ID can be used on any subsequent call to an hwrm command - * that takes a queue id. - * # IDs must always be queried by this command before any use - * by the driver or software. - * # Any driver or software should not make any assumptions about - * queue IDs. - * # A value of 0xff indicates that the queue is not available. - * # Available queues may not be in sequential order. + * Minimum number of completions aggregated before signaling + * an interrupt. */ - uint8_t queue_id6; - /* This value is applicable to CoS queues only. */ - uint8_t queue_id6_service_profile; - /* Lossy (best-effort) */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSY \ - UINT32_C(0x0) - /* Lossless (legacy) */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSLESS \ - UINT32_C(0x1) - /* Lossless RoCE */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSLESS_ROCE \ - UINT32_C(0x1) - /* Lossy RoCE CNP */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSY_ROCE_CNP \ - UINT32_C(0x2) - /* Lossless NIC */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSLESS_NIC \ - UINT32_C(0x3) - /* Set to 0xFF... (All Fs) if there is no service profile specified */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_UNKNOWN \ - UINT32_C(0xff) - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LAST \ - HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_UNKNOWN + uint16_t num_cmpl_aggr_int; /* - * ID of CoS Queue 7. - * FF - Invalid id - * - * # This ID can be used on any subsequent call to an hwrm command - * that takes a queue id. - * # IDs must always be queried by this command before any use - * by the driver or software. - * # Any driver or software should not make any assumptions about - * queue IDs. - * # A value of 0xff indicates that the queue is not available. - * # Available queues may not be in sequential order. + * Bitfield that indicates which parameters are to be applied. Only + * required when configuring devices with notification queues, and + * used in that case to set certain parameters on completion queues + * and others on notification queues. */ - uint8_t queue_id7; - /* This value is applicable to CoS queues only. */ - uint8_t queue_id7_service_profile; - /* Lossy (best-effort) */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSY \ - UINT32_C(0x0) - /* Lossless (legacy) */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSLESS \ - UINT32_C(0x1) - /* Lossless RoCE */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSLESS_ROCE \ + uint16_t enables; + /* + * This bit must be '1' for the num_cmpl_dma_aggr field to be + * configured. + */ + #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_NUM_CMPL_DMA_AGGR \ UINT32_C(0x1) - /* Lossy RoCE CNP */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSY_ROCE_CNP \ + /* + * This bit must be '1' for the num_cmpl_dma_aggr_during_int field to be + * configured. + */ + #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_NUM_CMPL_DMA_AGGR_DURING_INT \ UINT32_C(0x2) - /* Lossless NIC */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSLESS_NIC \ - UINT32_C(0x3) - /* Set to 0xFF... (All Fs) if there is no service profile specified */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_UNKNOWN \ - UINT32_C(0xff) - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LAST \ - HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_UNKNOWN + /* + * This bit must be '1' for the cmpl_aggr_dma_tmr field to be + * configured. + */ + #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_CMPL_AGGR_DMA_TMR \ + UINT32_C(0x4) + /* + * This bit must be '1' for the int_lat_tmr_min field to be + * configured. + */ + #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_INT_LAT_TMR_MIN \ + UINT32_C(0x8) + /* + * This bit must be '1' for the int_lat_tmr_max field to be + * configured. + */ + #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_INT_LAT_TMR_MAX \ + UINT32_C(0x10) + /* + * This bit must be '1' for the num_cmpl_aggr_int field to be + * configured. + */ + #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_NUM_CMPL_AGGR_INT \ + UINT32_C(0x20) + uint8_t unused_0[4]; +} __rte_packed; + +/* hwrm_ring_cmpl_ring_cfg_aggint_params_output (size:128b/16B) */ +struct hwrm_ring_cmpl_ring_cfg_aggint_params_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -15366,15 +28074,15 @@ struct hwrm_queue_qportcfg_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/******************* - * hwrm_queue_qcfg * - *******************/ +/*********************** + * hwrm_ring_grp_alloc * + ***********************/ -/* hwrm_queue_qcfg_input (size:192b/24B) */ -struct hwrm_queue_qcfg_input { +/* hwrm_ring_grp_alloc_input (size:192b/24B) */ +struct hwrm_ring_grp_alloc_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -15391,7 +28099,8 @@ struct hwrm_queue_qcfg_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -15402,25 +28111,31 @@ struct hwrm_queue_qcfg_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - uint32_t flags; /* - * Enumeration denoting the RX, TX type of the resource. - * This enumeration is used for resources that are similar for both - * TX and RX paths of the chip. + * This value identifies the CR associated with the ring + * group. */ - #define HWRM_QUEUE_QCFG_INPUT_FLAGS_PATH UINT32_C(0x1) - /* tx path */ - #define HWRM_QUEUE_QCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0) - /* rx path */ - #define HWRM_QUEUE_QCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1) - #define HWRM_QUEUE_QCFG_INPUT_FLAGS_PATH_LAST \ - HWRM_QUEUE_QCFG_INPUT_FLAGS_PATH_RX - /* Queue ID of the queue. */ - uint32_t queue_id; -} __attribute__((packed)); + uint16_t cr; + /* + * This value identifies the main RR associated with the ring + * group. + */ + uint16_t rr; + /* + * This value identifies the aggregation RR associated with + * the ring group. If this value is 0xFF... (All Fs), then no + * Aggregation ring will be set. + */ + uint16_t ar; + /* + * This value identifies the statistics context associated + * with the ring group. + */ + uint16_t sc; +} __rte_packed; -/* hwrm_queue_qcfg_output (size:128b/16B) */ -struct hwrm_queue_qcfg_output { +/* hwrm_ring_grp_alloc_output (size:128b/16B) */ +struct hwrm_ring_grp_alloc_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -15430,31 +28145,12 @@ struct hwrm_queue_qcfg_output { /* The length of the response data in number of bytes. */ uint16_t resp_len; /* - * This value is a the estimate packet length used in the - * TX arbiter. - */ - uint32_t queue_len; - /* This value is applicable to CoS queues only. */ - uint8_t service_profile; - /* Lossy (best-effort) */ - #define HWRM_QUEUE_QCFG_OUTPUT_SERVICE_PROFILE_LOSSY UINT32_C(0x0) - /* Lossless */ - #define HWRM_QUEUE_QCFG_OUTPUT_SERVICE_PROFILE_LOSSLESS UINT32_C(0x1) - /* Set to 0xFF... (All Fs) if there is no service profile specified */ - #define HWRM_QUEUE_QCFG_OUTPUT_SERVICE_PROFILE_UNKNOWN UINT32_C(0xff) - #define HWRM_QUEUE_QCFG_OUTPUT_SERVICE_PROFILE_LAST \ - HWRM_QUEUE_QCFG_OUTPUT_SERVICE_PROFILE_UNKNOWN - /* Information about queue configuration. */ - uint8_t queue_cfg_info; - /* - * If this flag is set to '1', then the queue is - * configured asymmetrically on TX and RX sides. - * If this flag is set to '0', then this queue is - * configured symmetrically on TX and RX sides. + * This is the ring group ID value. Use this value to program + * the default ring group for the VNIC or as table entries + * in an RSS/COS context. */ - #define HWRM_QUEUE_QCFG_OUTPUT_QUEUE_CFG_INFO_ASYM_CFG \ - UINT32_C(0x1) - uint8_t unused_0; + uint32_t ring_group_id; + uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -15463,15 +28159,15 @@ struct hwrm_queue_qcfg_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/****************** - * hwrm_queue_cfg * - ******************/ +/********************** + * hwrm_ring_grp_free * + **********************/ -/* hwrm_queue_cfg_input (size:320b/40B) */ -struct hwrm_queue_cfg_input { +/* hwrm_ring_grp_free_input (size:192b/24B) */ +struct hwrm_ring_grp_free_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -15488,7 +28184,8 @@ struct hwrm_queue_cfg_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -15497,58 +28194,15 @@ struct hwrm_queue_cfg_input { * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. - */ - uint64_t resp_addr; - uint32_t flags; - /* - * Enumeration denoting the RX, TX, or both directions applicable to the resource. - * This enumeration is used for resources that are similar for both - * TX and RX paths of the chip. - */ - #define HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_MASK UINT32_C(0x3) - #define HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_SFT 0 - /* tx path */ - #define HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0) - /* rx path */ - #define HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1) - /* Bi-directional (Symmetrically applicable to TX and RX paths) */ - #define HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_BIDIR UINT32_C(0x2) - #define HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_LAST \ - HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_BIDIR - uint32_t enables; - /* - * This bit must be '1' for the dflt_len field to be - * configured. - */ - #define HWRM_QUEUE_CFG_INPUT_ENABLES_DFLT_LEN UINT32_C(0x1) - /* - * This bit must be '1' for the service_profile field to be - * configured. - */ - #define HWRM_QUEUE_CFG_INPUT_ENABLES_SERVICE_PROFILE UINT32_C(0x2) - /* Queue ID of queue that is to be configured by this function. */ - uint32_t queue_id; - /* - * This value is a the estimate packet length used in the - * TX arbiter. - * Set to 0xFF... (All Fs) to not adjust this value. - */ - uint32_t dflt_len; - /* This value is applicable to CoS queues only. */ - uint8_t service_profile; - /* Lossy (best-effort) */ - #define HWRM_QUEUE_CFG_INPUT_SERVICE_PROFILE_LOSSY UINT32_C(0x0) - /* Lossless */ - #define HWRM_QUEUE_CFG_INPUT_SERVICE_PROFILE_LOSSLESS UINT32_C(0x1) - /* Set to 0xFF... (All Fs) if there is no service profile specified */ - #define HWRM_QUEUE_CFG_INPUT_SERVICE_PROFILE_UNKNOWN UINT32_C(0xff) - #define HWRM_QUEUE_CFG_INPUT_SERVICE_PROFILE_LAST \ - HWRM_QUEUE_CFG_INPUT_SERVICE_PROFILE_UNKNOWN - uint8_t unused_0[7]; -} __attribute__((packed)); + */ + uint64_t resp_addr; + /* This is the ring group ID value. */ + uint32_t ring_group_id; + uint8_t unused_0[4]; +} __rte_packed; -/* hwrm_queue_cfg_output (size:128b/16B) */ -struct hwrm_queue_cfg_output { +/* hwrm_ring_grp_free_output (size:128b/16B) */ +struct hwrm_ring_grp_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -15566,15 +28220,15 @@ struct hwrm_queue_cfg_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/***************************** - * hwrm_queue_pfcenable_qcfg * - *****************************/ +/********************** + * hwrm_ring_sq_alloc * + **********************/ -/* hwrm_queue_pfcenable_qcfg_input (size:192b/24B) */ -struct hwrm_queue_pfcenable_qcfg_input { +/* hwrm_ring_sq_alloc_input (size:1088b/136B) */ +struct hwrm_ring_sq_alloc_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -15591,142 +28245,516 @@ struct hwrm_queue_pfcenable_qcfg_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; /* - * A physical address pointer pointing to a host buffer that the - * command's response data will be written. This can be either a host - * physical address (HPA) or a guest physical address (GPA) and must - * point to a physically contiguous block of memory. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + uint32_t enables; + /* + * This bit must be '1' for the tqm_ring0 fields to be + * configured. + */ + #define HWRM_RING_SQ_ALLOC_INPUT_ENABLES_TQM_RING0 UINT32_C(0x1) + /* + * This bit must be '1' for the tqm_ring1 fields to be + * configured. + */ + #define HWRM_RING_SQ_ALLOC_INPUT_ENABLES_TQM_RING1 UINT32_C(0x2) + /* + * This bit must be '1' for the tqm_ring2 fields to be + * configured. + */ + #define HWRM_RING_SQ_ALLOC_INPUT_ENABLES_TQM_RING2 UINT32_C(0x4) + /* + * This bit must be '1' for the tqm_ring3 fields to be + * configured. + */ + #define HWRM_RING_SQ_ALLOC_INPUT_ENABLES_TQM_RING3 UINT32_C(0x8) + /* + * This bit must be '1' for the tqm_ring4 fields to be + * configured. + */ + #define HWRM_RING_SQ_ALLOC_INPUT_ENABLES_TQM_RING4 UINT32_C(0x10) + /* + * This bit must be '1' for the tqm_ring5 fields to be + * configured. + */ + #define HWRM_RING_SQ_ALLOC_INPUT_ENABLES_TQM_RING5 UINT32_C(0x20) + /* + * This bit must be '1' for the tqm_ring6 fields to be + * configured. + */ + #define HWRM_RING_SQ_ALLOC_INPUT_ENABLES_TQM_RING6 UINT32_C(0x40) + /* + * This bit must be '1' for the tqm_ring7 fields to be + * configured. + */ + #define HWRM_RING_SQ_ALLOC_INPUT_ENABLES_TQM_RING7 UINT32_C(0x80) + /* Reserved for future use. */ + uint32_t reserved; + /* TQM ring 0 page size and level. */ + uint8_t tqm_ring0_pg_size_tqm_ring0_lvl; + /* TQM ring 0 PBL indirect levels. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING0_LVL_MASK UINT32_C(0xf) + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING0_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING0_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING0_LVL_LVL_1 \ + UINT32_C(0x1) + /* + * PBL pointer points to PDE table with each entry pointing to PTE + * tables. + */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING0_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING0_LVL_LAST \ + HWRM_RING_SQ_ALLOC_INPUT_TQM_RING0_LVL_LVL_2 + /* TQM ring 0 page size. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING0_PG_SIZE_MASK UINT32_C(0xf0) + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING0_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING0_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING0_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING0_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING0_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING0_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING0_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING0_PG_SIZE_LAST \ + HWRM_RING_SQ_ALLOC_INPUT_TQM_RING0_PG_SIZE_PG_1G + /* TQM ring 1 page size and level. */ + uint8_t tqm_ring1_pg_size_tqm_ring1_lvl; + /* TQM ring 1 PBL indirect levels. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING1_LVL_MASK UINT32_C(0xf) + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING1_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING1_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING1_LVL_LVL_1 \ + UINT32_C(0x1) + /* + * PBL pointer points to PDE table with each entry pointing to PTE + * tables. + */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING1_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING1_LVL_LAST \ + HWRM_RING_SQ_ALLOC_INPUT_TQM_RING1_LVL_LVL_2 + /* TQM ring 1 page size. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING1_PG_SIZE_MASK UINT32_C(0xf0) + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING1_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING1_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING1_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING1_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING1_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING1_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING1_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING1_PG_SIZE_LAST \ + HWRM_RING_SQ_ALLOC_INPUT_TQM_RING1_PG_SIZE_PG_1G + /* TQM ring 2 page size and level. */ + uint8_t tqm_ring2_pg_size_tqm_ring2_lvl; + /* TQM ring 2 PBL indirect levels. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING2_LVL_MASK UINT32_C(0xf) + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING2_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING2_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING2_LVL_LVL_1 \ + UINT32_C(0x1) + /* + * PBL pointer points to PDE table with each entry pointing to PTE + * tables. + */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING2_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING2_LVL_LAST \ + HWRM_RING_SQ_ALLOC_INPUT_TQM_RING2_LVL_LVL_2 + /* TQM ring 2 page size. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING2_PG_SIZE_MASK UINT32_C(0xf0) + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING2_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING2_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING2_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING2_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING2_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING2_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING2_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING2_PG_SIZE_LAST \ + HWRM_RING_SQ_ALLOC_INPUT_TQM_RING2_PG_SIZE_PG_1G + /* TQM ring 3 page size and level. */ + uint8_t tqm_ring3_pg_size_tqm_ring3_lvl; + /* TQM ring 3 PBL indirect levels. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING3_LVL_MASK UINT32_C(0xf) + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING3_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING3_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING3_LVL_LVL_1 \ + UINT32_C(0x1) + /* + * PBL pointer points to PDE table with each entry pointing to PTE + * tables. + */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING3_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING3_LVL_LAST \ + HWRM_RING_SQ_ALLOC_INPUT_TQM_RING3_LVL_LVL_2 + /* TQM ring 3 page size. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING3_PG_SIZE_MASK UINT32_C(0xf0) + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING3_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING3_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING3_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING3_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING3_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING3_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING3_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING3_PG_SIZE_LAST \ + HWRM_RING_SQ_ALLOC_INPUT_TQM_RING3_PG_SIZE_PG_1G + /* TQM ring 4 page size and level. */ + uint8_t tqm_ring4_pg_size_tqm_ring4_lvl; + /* TQM ring 4 PBL indirect levels. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING4_LVL_MASK UINT32_C(0xf) + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING4_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING4_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING4_LVL_LVL_1 \ + UINT32_C(0x1) + /* + * PBL pointer points to PDE table with each entry pointing to PTE + * tables. + */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING4_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING4_LVL_LAST \ + HWRM_RING_SQ_ALLOC_INPUT_TQM_RING4_LVL_LVL_2 + /* TQM ring 4 page size. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING4_PG_SIZE_MASK UINT32_C(0xf0) + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING4_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING4_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING4_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING4_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING4_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING4_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING4_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING4_PG_SIZE_LAST \ + HWRM_RING_SQ_ALLOC_INPUT_TQM_RING4_PG_SIZE_PG_1G + /* TQM ring 5 page size and level. */ + uint8_t tqm_ring5_pg_size_tqm_ring5_lvl; + /* TQM ring 5 PBL indirect levels. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING5_LVL_MASK UINT32_C(0xf) + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING5_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING5_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING5_LVL_LVL_1 \ + UINT32_C(0x1) + /* + * PBL pointer points to PDE table with each entry pointing to PTE + * tables. + */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING5_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING5_LVL_LAST \ + HWRM_RING_SQ_ALLOC_INPUT_TQM_RING5_LVL_LVL_2 + /* TQM ring 5 page size. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING5_PG_SIZE_MASK UINT32_C(0xf0) + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING5_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING5_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING5_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING5_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING5_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING5_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING5_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING5_PG_SIZE_LAST \ + HWRM_RING_SQ_ALLOC_INPUT_TQM_RING5_PG_SIZE_PG_1G + /* TQM ring 6 page size and level. */ + uint8_t tqm_ring6_pg_size_tqm_ring6_lvl; + /* TQM ring 6 PBL indirect levels. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING6_LVL_MASK UINT32_C(0xf) + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING6_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING6_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING6_LVL_LVL_1 \ + UINT32_C(0x1) + /* + * PBL pointer points to PDE table with each entry pointing to PTE + * tables. + */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING6_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING6_LVL_LAST \ + HWRM_RING_SQ_ALLOC_INPUT_TQM_RING6_LVL_LVL_2 + /* TQM ring 6 page size. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING6_PG_SIZE_MASK UINT32_C(0xf0) + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING6_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING6_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING6_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING6_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING6_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING6_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING6_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING6_PG_SIZE_LAST \ + HWRM_RING_SQ_ALLOC_INPUT_TQM_RING6_PG_SIZE_PG_1G + /* TQM ring 7 page size and level. */ + uint8_t tqm_ring7_pg_size_tqm_ring7_lvl; + /* TQM ring 7 PBL indirect levels. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING7_LVL_MASK UINT32_C(0xf) + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING7_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING7_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING7_LVL_LVL_1 \ + UINT32_C(0x1) + /* + * PBL pointer points to PDE table with each entry pointing to PTE + * tables. + */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING7_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING7_LVL_LAST \ + HWRM_RING_SQ_ALLOC_INPUT_TQM_RING7_LVL_LVL_2 + /* TQM ring 7 page size. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING7_PG_SIZE_MASK UINT32_C(0xf0) + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING7_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING7_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING7_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING7_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING7_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING7_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING7_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_RING_SQ_ALLOC_INPUT_TQM_RING7_PG_SIZE_LAST \ + HWRM_RING_SQ_ALLOC_INPUT_TQM_RING7_PG_SIZE_PG_1G + /* TQM ring 0 page directory. */ + uint64_t tqm_ring0_page_dir; + /* TQM ring 1 page directory. */ + uint64_t tqm_ring1_page_dir; + /* TQM ring 2 page directory. */ + uint64_t tqm_ring2_page_dir; + /* TQM ring 3 page directory. */ + uint64_t tqm_ring3_page_dir; + /* TQM ring 4 page directory. */ + uint64_t tqm_ring4_page_dir; + /* TQM ring 5 page directory. */ + uint64_t tqm_ring5_page_dir; + /* TQM ring 6 page directory. */ + uint64_t tqm_ring6_page_dir; + /* TQM ring 7 page directory. */ + uint64_t tqm_ring7_page_dir; + /* + * Number of TQM ring 0 entries. + * + * TQM fastpath rings should be sized large enough to accommodate the + * maximum number of QPs (either L2 or RoCE, or both if shared) + * that can be enqueued to the TQM ring. + * + * Note that TQM ring sizes cannot be extended while the system is + * operational. If a PF driver needs to extend a TQM ring, it needs + * to delete the SQ and then reallocate it. */ - uint64_t resp_addr; + uint32_t tqm_ring0_num_entries; /* - * Port ID of port for which the table is being configured. - * The HWRM needs to check whether this function is allowed - * to configure pri2cos mapping on this port. + * Number of TQM ring 1 entries. + * + * TQM fastpath rings should be sized large enough to accommodate the + * maximum number of QPs (either L2 or RoCE, or both if shared) + * that can be enqueued to the TQM ring. + * + * Note that TQM ring sizes cannot be extended while the system is + * operational. If a PF driver needs to extend a TQM ring, it needs + * to delete the SQ and then reallocate it. */ - uint16_t port_id; - uint8_t unused_0[6]; -} __attribute__((packed)); - -/* hwrm_queue_pfcenable_qcfg_output (size:128b/16B) */ -struct hwrm_queue_pfcenable_qcfg_output { - /* The specific error status for the command. */ - uint16_t error_code; - /* The HWRM command request type. */ - uint16_t req_type; - /* The sequence ID from the original command. */ - uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; - uint32_t flags; - /* If set to 1, then PFC is enabled on PRI 0. */ - #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI0_PFC_ENABLED \ - UINT32_C(0x1) - /* If set to 1, then PFC is enabled on PRI 1. */ - #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI1_PFC_ENABLED \ - UINT32_C(0x2) - /* If set to 1, then PFC is enabled on PRI 2. */ - #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI2_PFC_ENABLED \ - UINT32_C(0x4) - /* If set to 1, then PFC is enabled on PRI 3. */ - #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI3_PFC_ENABLED \ - UINT32_C(0x8) - /* If set to 1, then PFC is enabled on PRI 4. */ - #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI4_PFC_ENABLED \ - UINT32_C(0x10) - /* If set to 1, then PFC is enabled on PRI 5. */ - #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI5_PFC_ENABLED \ - UINT32_C(0x20) - /* If set to 1, then PFC is enabled on PRI 6. */ - #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI6_PFC_ENABLED \ - UINT32_C(0x40) - /* If set to 1, then PFC is enabled on PRI 7. */ - #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI7_PFC_ENABLED \ - UINT32_C(0x80) - uint8_t unused_0[3]; + uint32_t tqm_ring1_num_entries; /* - * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' - * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. + * Number of TQM ring 2 entries. + * + * TQM fastpath rings should be sized large enough to accommodate the + * maximum number of QPs (either L2 or RoCE, or both if shared) + * that can be enqueued to the TQM ring. + * + * Note that TQM ring sizes cannot be extended while the system is + * operational. If a PF driver needs to extend a TQM ring, it needs + * to delete the SQ and then reallocate it. */ - uint8_t valid; -} __attribute__((packed)); - -/**************************** - * hwrm_queue_pfcenable_cfg * - ****************************/ - - -/* hwrm_queue_pfcenable_cfg_input (size:192b/24B) */ -struct hwrm_queue_pfcenable_cfg_input { - /* The HWRM command request type. */ - uint16_t req_type; + uint32_t tqm_ring2_num_entries; /* - * The completion ring to send the completion event on. This should - * be the NQ ID returned from the `nq_alloc` HWRM command. + * Number of TQM ring 3 entries. + * + * TQM fastpath rings should be sized large enough to accommodate the + * maximum number of QPs (either L2 or RoCE, or both if shared) + * that can be enqueued to the TQM ring. + * + * Note that TQM ring sizes cannot be extended while the system is + * operational. If a PF driver needs to extend a TQM ring, it needs + * to delete the SQ and then reallocate it. */ - uint16_t cmpl_ring; + uint32_t tqm_ring3_num_entries; /* - * The sequence ID is used by the driver for tracking multiple - * commands. This ID is treated as opaque data by the firmware and - * the value is returned in the `hwrm_resp_hdr` upon completion. + * Number of TQM ring 4 entries. + * + * TQM fastpath rings should be sized large enough to accommodate the + * maximum number of QPs (either L2 or RoCE, or both if shared) + * that can be enqueued to the TQM ring. + * + * Note that TQM ring sizes cannot be extended while the system is + * operational. If a PF driver needs to extend a TQM ring, it needs + * to delete the SQ and then reallocate it. */ - uint16_t seq_id; + uint32_t tqm_ring4_num_entries; /* - * The target ID of the command: - * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors - * * 0xFFFF - HWRM + * Number of TQM ring 5 entries. + * + * TQM fastpath rings should be sized large enough to accommodate the + * maximum number of QPs (either L2 or RoCE, or both if shared) + * that can be enqueued to the TQM ring. + * + * Note that TQM ring sizes cannot be extended while the system is + * operational. If a PF driver needs to extend a TQM ring, it needs + * to delete the SQ and then reallocate it. */ - uint16_t target_id; + uint32_t tqm_ring5_num_entries; /* - * A physical address pointer pointing to a host buffer that the - * command's response data will be written. This can be either a host - * physical address (HPA) or a guest physical address (GPA) and must - * point to a physically contiguous block of memory. + * Number of TQM ring 6 entries. + * + * TQM fastpath rings should be sized large enough to accommodate the + * maximum number of QPs (either L2 or RoCE, or both if shared) + * that can be enqueued to the TQM ring. + * + * Note that TQM ring sizes cannot be extended while the system is + * operational. If a PF driver needs to extend a TQM ring, it needs + * to delete the SQ and then reallocate it. */ - uint64_t resp_addr; - uint32_t flags; - /* If set to 1, then PFC is requested to be enabled on PRI 0. */ - #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI0_PFC_ENABLED \ - UINT32_C(0x1) - /* If set to 1, then PFC is requested to be enabled on PRI 1. */ - #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI1_PFC_ENABLED \ - UINT32_C(0x2) - /* If set to 1, then PFC is requested to be enabled on PRI 2. */ - #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI2_PFC_ENABLED \ - UINT32_C(0x4) - /* If set to 1, then PFC is requested to be enabled on PRI 3. */ - #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI3_PFC_ENABLED \ - UINT32_C(0x8) - /* If set to 1, then PFC is requested to be enabled on PRI 4. */ - #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI4_PFC_ENABLED \ - UINT32_C(0x10) - /* If set to 1, then PFC is requested to be enabled on PRI 5. */ - #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI5_PFC_ENABLED \ - UINT32_C(0x20) - /* If set to 1, then PFC is requested to be enabled on PRI 6. */ - #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI6_PFC_ENABLED \ - UINT32_C(0x40) - /* If set to 1, then PFC is requested to be enabled on PRI 7. */ - #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI7_PFC_ENABLED \ - UINT32_C(0x80) + uint32_t tqm_ring6_num_entries; /* - * Port ID of port for which the table is being configured. - * The HWRM needs to check whether this function is allowed - * to configure pri2cos mapping on this port. + * Number of TQM ring 7 entries. + * + * TQM fastpath rings should be sized large enough to accommodate the + * maximum number of QPs (either L2 or RoCE, or both if shared) + * that can be enqueued to the TQM ring. + * + * Note that TQM ring sizes cannot be extended while the system is + * operational. If a PF driver needs to extend a TQM ring, it needs + * to delete the SQ and then reallocate it. */ - uint16_t port_id; - uint8_t unused_0[2]; -} __attribute__((packed)); + uint32_t tqm_ring7_num_entries; + /* Number of bytes that have been allocated for each context entry. */ + uint16_t tqm_entry_size; + uint8_t unused_0[6]; +} __rte_packed; -/* hwrm_queue_pfcenable_cfg_output (size:128b/16B) */ -struct hwrm_queue_pfcenable_cfg_output { +/* hwrm_ring_sq_alloc_output (size:128b/16B) */ +struct hwrm_ring_sq_alloc_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -15735,7 +28763,13 @@ struct hwrm_queue_pfcenable_cfg_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - uint8_t unused_0[7]; + /* + * This is an identifier for the SQ to be used in other HWRM commands + * that need to reference this SQ. This value is greater than zero + * (i.e. a sq_id of zero references the default SQ). + */ + uint16_t sq_id; + uint8_t unused_0[5]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -15744,15 +28778,15 @@ struct hwrm_queue_pfcenable_cfg_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/*************************** - * hwrm_queue_pri2cos_qcfg * - ***************************/ +/******************** + * hwrm_ring_sq_cfg * + ********************/ -/* hwrm_queue_pri2cos_qcfg_input (size:192b/24B) */ -struct hwrm_queue_pri2cos_qcfg_input { +/* hwrm_ring_sq_cfg_input (size:768b/96B) */ +struct hwrm_ring_sq_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -15769,7 +28803,8 @@ struct hwrm_queue_pri2cos_qcfg_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -15780,112 +28815,177 @@ struct hwrm_queue_pri2cos_qcfg_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - uint32_t flags; /* - * Enumeration denoting the RX, TX type of the resource. - * This enumeration is used for resources that are similar for both - * TX and RX paths of the chip. + * Identifies the SQ being configured. A sq_id of zero refers to the + * default SQ. */ - #define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_PATH UINT32_C(0x1) - /* tx path */ - #define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0) - /* rx path */ - #define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1) - #define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_PATH_LAST \ - HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_PATH_RX + uint16_t sq_id; /* - * When this bit is set to '0', the query is - * for VLAN PRI field in tunnel headers. - * When this bit is set to '1', the query is - * for VLAN PRI field in inner packet headers. + * This field is an 8 bit bitmap that indicates which TCs are enabled + * in this SQ. Bit 0 represents traffic class 0 and bit 7 represents + * traffic class 7. */ - #define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_IVLAN UINT32_C(0x2) - /* - * Port ID of port for which the table is being configured. - * The HWRM needs to check whether this function is allowed - * to configure pri2cos mapping on this port. + uint8_t tc_enabled; + uint8_t unused_0; + uint32_t flags; + /* The tc_max_bw array and the max_bw parameters are valid */ + #define HWRM_RING_SQ_CFG_INPUT_FLAGS_TC_MAX_BW_ENABLED \ + UINT32_C(0x1) + /* The tc_min_bw array is valid */ + #define HWRM_RING_SQ_CFG_INPUT_FLAGS_TC_MIN_BW_ENABLED \ + UINT32_C(0x2) + /* Maximum bandwidth of the traffic class, specified in Mbps. */ + uint32_t max_bw_tc0; + /* Maximum bandwidth of the traffic class, specified in Mbps. */ + uint32_t max_bw_tc1; + /* Maximum bandwidth of the traffic class, specified in Mbps. */ + uint32_t max_bw_tc2; + /* Maximum bandwidth of the traffic class, specified in Mbps. */ + uint32_t max_bw_tc3; + /* Maximum bandwidth of the traffic class, specified in Mbps. */ + uint32_t max_bw_tc4; + /* Maximum bandwidth of the traffic class, specified in Mbps. */ + uint32_t max_bw_tc5; + /* Maximum bandwidth of the traffic class, specified in Mbps. */ + uint32_t max_bw_tc6; + /* Maximum bandwidth of the traffic class, specified in Mbps. */ + uint32_t max_bw_tc7; + /* + * Bandwidth reservation for the traffic class, specified in Mbps. + * A value of zero signifies that traffic belonging to this class + * shares the bandwidth reservation for the same traffic class of + * the default SQ. + */ + uint32_t min_bw_tc0; + /* + * Bandwidth reservation for the traffic class, specified in Mbps. + * A value of zero signifies that traffic belonging to this class + * shares the bandwidth reservation for the same traffic class of + * the default SQ. + */ + uint32_t min_bw_tc1; + /* + * Bandwidth reservation for the traffic class, specified in Mbps. + * A value of zero signifies that traffic belonging to this class + * shares the bandwidth reservation for the same traffic class of + * the default SQ. + */ + uint32_t min_bw_tc2; + /* + * Bandwidth reservation for the traffic class, specified in Mbps. + * A value of zero signifies that traffic belonging to this class + * shares the bandwidth reservation for the same traffic class of + * the default SQ. + */ + uint32_t min_bw_tc3; + /* + * Bandwidth reservation for the traffic class, specified in Mbps. + * A value of zero signifies that traffic belonging to this class + * shares the bandwidth reservation for the same traffic class of + * the default SQ. + */ + uint32_t min_bw_tc4; + /* + * Bandwidth reservation for the traffic class, specified in Mbps. + * A value of zero signifies that traffic belonging to this class + * shares the bandwidth reservation for the same traffic class of + * the default SQ. + */ + uint32_t min_bw_tc5; + /* + * Bandwidth reservation for the traffic class, specified in Mbps. + * A value of zero signifies that traffic belonging to this class + * shares the bandwidth reservation for the same traffic class of + * the default SQ. + */ + uint32_t min_bw_tc6; + /* + * Bandwidth reservation for the traffic class, specified in Mbps. + * A value of zero signifies that traffic belonging to this class + * shares the bandwidth reservation for the same traffic class of + * the default SQ. + */ + uint32_t min_bw_tc7; + /* + * Indicates the max bandwidth for all enabled traffic classes in + * this SQ, specified in Mbps. */ - uint8_t port_id; - uint8_t unused_0[3]; -} __attribute__((packed)); + uint32_t max_bw; + uint8_t unused_1[4]; +} __rte_packed; -/* hwrm_queue_pri2cos_qcfg_output (size:192b/24B) */ -struct hwrm_queue_pri2cos_qcfg_output { +/* hwrm_ring_sq_cfg_output (size:128b/16B) */ +struct hwrm_ring_sq_cfg_output { /* The specific error status for the command. */ - uint16_t error_code; - /* The HWRM command request type. */ - uint16_t req_type; - /* The sequence ID from the original command. */ - uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; - /* - * CoS Queue assigned to priority 0. This value can only - * be changed before traffic has started. - * A value of 0xff indicates that no CoS queue is assigned to the - * specified priority. - */ - uint8_t pri0_cos_queue_id; - /* - * CoS Queue assigned to priority 1. This value can only - * be changed before traffic has started. - * A value of 0xff indicates that no CoS queue is assigned to the - * specified priority. - */ - uint8_t pri1_cos_queue_id; - /* - * CoS Queue assigned to priority 2 This value can only - * be changed before traffic has started. - * A value of 0xff indicates that no CoS queue is assigned to the - * specified priority. - */ - uint8_t pri2_cos_queue_id; - /* - * CoS Queue assigned to priority 3. This value can only - * be changed before traffic has started. - * A value of 0xff indicates that no CoS queue is assigned to the - * specified priority. - */ - uint8_t pri3_cos_queue_id; + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; /* - * CoS Queue assigned to priority 4. This value can only - * be changed before traffic has started. - * A value of 0xff indicates that no CoS queue is assigned to the - * specified priority. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - uint8_t pri4_cos_queue_id; + uint8_t valid; +} __rte_packed; + +/********************* + * hwrm_ring_sq_free * + *********************/ + + +/* hwrm_ring_sq_free_input (size:192b/24B) */ +struct hwrm_ring_sq_free_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * CoS Queue assigned to priority 5. This value can only - * be changed before traffic has started. - * A value of 0xff indicates that no CoS queue is assigned to the - * specified priority. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - uint8_t pri5_cos_queue_id; + uint16_t cmpl_ring; /* - * CoS Queue assigned to priority 6. This value can only - * be changed before traffic has started. - * A value of 0xff indicates that no CoS queue is assigned to the - * specified priority. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - uint8_t pri6_cos_queue_id; + uint16_t seq_id; /* - * CoS Queue assigned to priority 7. This value can only - * be changed before traffic has started. - * A value of 0xff indicates that no CoS queue is assigned to the - * specified priority. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - uint8_t pri7_cos_queue_id; - /* Information about queue configuration. */ - uint8_t queue_cfg_info; + uint16_t target_id; /* - * If this flag is set to '1', then the PRI to CoS - * configuration is asymmetric on TX and RX sides. - * If this flag is set to '0', then PRI to CoS configuration - * is symmetric on TX and RX sides. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - #define HWRM_QUEUE_PRI2COS_QCFG_OUTPUT_QUEUE_CFG_INFO_ASYM_CFG \ - UINT32_C(0x1) + uint64_t resp_addr; + /* Identifies the SQ being freed. */ + uint16_t sq_id; uint8_t unused_0[6]; +} __rte_packed; + +/* hwrm_ring_sq_free_output (size:128b/16B) */ +struct hwrm_ring_sq_free_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -15894,15 +28994,35 @@ struct hwrm_queue_pri2cos_qcfg_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; +/* + * special reserved flow ID to identify per function default + * flows for vSwitch offload + */ +#define DEFAULT_FLOW_ID 0xFFFFFFFFUL +/* + * special reserved flow ID to identify per function RoCEv1 + * flows + */ +#define ROCEV1_FLOW_ID 0xFFFFFFFEUL +/* + * special reserved flow ID to identify per function RoCEv2 + * flows + */ +#define ROCEV2_FLOW_ID 0xFFFFFFFDUL +/* + * special reserved flow ID to identify per function RoCEv2 + * CNP flows + */ +#define ROCEV2_CNP_FLOW_ID 0xFFFFFFFCUL -/************************** - * hwrm_queue_pri2cos_cfg * - **************************/ +/**************************** + * hwrm_cfa_l2_filter_alloc * + ****************************/ -/* hwrm_queue_pri2cos_cfg_input (size:320b/40B) */ -struct hwrm_queue_pri2cos_cfg_input { +/* hwrm_cfa_l2_filter_alloc_input (size:768b/96B) */ +struct hwrm_cfa_l2_filter_alloc_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -15919,7 +29039,8 @@ struct hwrm_queue_pri2cos_cfg_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -15932,1195 +29053,1000 @@ struct hwrm_queue_pri2cos_cfg_input { uint64_t resp_addr; uint32_t flags; /* - * Enumeration denoting the RX, TX, or both directions applicable to the resource. + * Enumeration denoting the RX, TX type of the resource. * This enumeration is used for resources that are similar for both * TX and RX paths of the chip. */ - #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_MASK UINT32_C(0x3) - #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_SFT 0 + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH \ + UINT32_C(0x1) /* tx path */ - #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0) + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_TX \ + UINT32_C(0x0) /* rx path */ - #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1) - /* Bi-directional (Symmetrically applicable to TX and RX paths) */ - #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_BIDIR UINT32_C(0x2) - #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_LAST \ - HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_BIDIR + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX \ + UINT32_C(0x1) + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_LAST \ + HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX + /* Setting of this flag indicates the applicability to the loopback path. */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK \ + UINT32_C(0x2) /* - * When this bit is set to '0', the mapping is requested - * for VLAN PRI field in tunnel headers. - * When this bit is set to '1', the mapping is requested - * for VLAN PRI field in inner packet headers. + * Setting of this flag indicates drop action. If this flag is not set, + * then it should be considered accept action. */ - #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_IVLAN UINT32_C(0x4) + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_DROP \ + UINT32_C(0x4) + /* + * If this flag is set, all t_l2_* fields are invalid + * and they should not be specified. + * If this flag is set, then l2_* fields refer to + * fields of outermost L2 header. + */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOST \ + UINT32_C(0x8) + /* + * Enumeration denoting NO_ROCE_L2 to support old drivers. + * New driver L2 for only L2 traffic, ROCE for roce and l2 traffic + */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_MASK \ + UINT32_C(0x30) + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_SFT 4 + /* To support old drivers */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_NO_ROCE_L2 \ + (UINT32_C(0x0) << 4) + /* Only L2 traffic */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_L2 \ + (UINT32_C(0x1) << 4) + /* Roce & L2 traffic */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_ROCE \ + (UINT32_C(0x2) << 4) + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_LAST \ + HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_ROCE + /* + * Setting of this flag indicates that no XDP filter is created with + * L2 filter. + * 0 - legacy behavior, XDP filter is created with L2 filter + * 1 - XDP filter won't be created with L2 filter + */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_XDP_DISABLE \ + UINT32_C(0x40) + /* + * Setting this flag to 1 indicate the L2 fields in this command + * pertain to source fields. Setting this flag to 0 indicate the + * L2 fields in this command pertain to the destination fields + * and this is the default/legacy behavior. + */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_SOURCE_VALID \ + UINT32_C(0x80) uint32_t enables; /* - * This bit must be '1' for the pri0_cos_queue_id field to be + * This bit must be '1' for the l2_addr field to be * configured. */ - #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI0_COS_QUEUE_ID \ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR \ UINT32_C(0x1) /* - * This bit must be '1' for the pri1_cos_queue_id field to be + * This bit must be '1' for the l2_addr_mask field to be * configured. */ - #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI1_COS_QUEUE_ID \ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR_MASK \ UINT32_C(0x2) /* - * This bit must be '1' for the pri2_cos_queue_id field to be + * This bit must be '1' for the l2_ovlan field to be * configured. */ - #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI2_COS_QUEUE_ID \ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN \ UINT32_C(0x4) /* - * This bit must be '1' for the pri3_cos_queue_id field to be + * This bit must be '1' for the l2_ovlan_mask field to be * configured. */ - #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI3_COS_QUEUE_ID \ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN_MASK \ UINT32_C(0x8) /* - * This bit must be '1' for the pri4_cos_queue_id field to be + * This bit must be '1' for the l2_ivlan field to be * configured. */ - #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI4_COS_QUEUE_ID \ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN \ UINT32_C(0x10) /* - * This bit must be '1' for the pri5_cos_queue_id field to be + * This bit must be '1' for the l2_ivlan_mask field to be * configured. */ - #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI5_COS_QUEUE_ID \ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN_MASK \ UINT32_C(0x20) /* - * This bit must be '1' for the pri6_cos_queue_id field to be + * This bit must be '1' for the t_l2_addr field to be * configured. */ - #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI6_COS_QUEUE_ID \ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR \ UINT32_C(0x40) /* - * This bit must be '1' for the pri7_cos_queue_id field to be + * This bit must be '1' for the t_l2_addr_mask field to be * configured. */ - #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI7_COS_QUEUE_ID \ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR_MASK \ UINT32_C(0x80) /* - * Port ID of port for which the table is being configured. - * The HWRM needs to check whether this function is allowed - * to configure pri2cos mapping on this port. + * This bit must be '1' for the t_l2_ovlan field to be + * configured. */ - uint8_t port_id; + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN \ + UINT32_C(0x100) /* - * CoS Queue assigned to priority 0. This value can only - * be changed before traffic has started. + * This bit must be '1' for the t_l2_ovlan_mask field to be + * configured. */ - uint8_t pri0_cos_queue_id; + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN_MASK \ + UINT32_C(0x200) /* - * CoS Queue assigned to priority 1. This value can only - * be changed before traffic has started. + * This bit must be '1' for the t_l2_ivlan field to be + * configured. */ - uint8_t pri1_cos_queue_id; + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN \ + UINT32_C(0x400) /* - * CoS Queue assigned to priority 2 This value can only - * be changed before traffic has started. + * This bit must be '1' for the t_l2_ivlan_mask field to be + * configured. */ - uint8_t pri2_cos_queue_id; + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN_MASK \ + UINT32_C(0x800) /* - * CoS Queue assigned to priority 3. This value can only - * be changed before traffic has started. + * This bit must be '1' for the src_type field to be + * configured. */ - uint8_t pri3_cos_queue_id; + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_TYPE \ + UINT32_C(0x1000) /* - * CoS Queue assigned to priority 4. This value can only - * be changed before traffic has started. + * This bit must be '1' for the src_id field to be + * configured. */ - uint8_t pri4_cos_queue_id; + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_ID \ + UINT32_C(0x2000) /* - * CoS Queue assigned to priority 5. This value can only - * be changed before traffic has started. + * This bit must be '1' for the tunnel_type field to be + * configured. */ - uint8_t pri5_cos_queue_id; + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \ + UINT32_C(0x4000) /* - * CoS Queue assigned to priority 6. This value can only - * be changed before traffic has started. + * This bit must be '1' for the dst_id field to be + * configured. */ - uint8_t pri6_cos_queue_id; + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_DST_ID \ + UINT32_C(0x8000) /* - * CoS Queue assigned to priority 7. This value can only - * be changed before traffic has started. + * This bit must be '1' for the mirror_vnic_id field to be + * configured. */ - uint8_t pri7_cos_queue_id; - uint8_t unused_0[7]; -} __attribute__((packed)); - -/* hwrm_queue_pri2cos_cfg_output (size:128b/16B) */ -struct hwrm_queue_pri2cos_cfg_output { - /* The specific error status for the command. */ - uint16_t error_code; - /* The HWRM command request type. */ - uint16_t req_type; - /* The sequence ID from the original command. */ - uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; - uint8_t unused_0[7]; + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \ + UINT32_C(0x10000) + /* + * This bit must be '1' for the num_vlans field to be + * configured. + */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_NUM_VLANS \ + UINT32_C(0x20000) /* - * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' - * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. + * This bit must be '1' for the t_num_vlans field to be + * configured. */ - uint8_t valid; -} __attribute__((packed)); - -/************************** - * hwrm_queue_cos2bw_qcfg * - **************************/ - - -/* hwrm_queue_cos2bw_qcfg_input (size:192b/24B) */ -struct hwrm_queue_cos2bw_qcfg_input { - /* The HWRM command request type. */ - uint16_t req_type; + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_NUM_VLANS \ + UINT32_C(0x40000) /* - * The completion ring to send the completion event on. This should - * be the NQ ID returned from the `nq_alloc` HWRM command. + * This value sets the match value for the L2 MAC address. + * Destination MAC address for RX path. + * Source MAC address for TX path. */ - uint16_t cmpl_ring; + uint8_t l2_addr[6]; + /* This value sets the match value for the number of VLANs. */ + uint8_t num_vlans; /* - * The sequence ID is used by the driver for tracking multiple - * commands. This ID is treated as opaque data by the firmware and - * the value is returned in the `hwrm_resp_hdr` upon completion. + * This value sets the match value for the number of VLANs + * in the tunnel headers. */ - uint16_t seq_id; + uint8_t t_num_vlans; /* - * The target ID of the command: - * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors - * * 0xFFFF - HWRM + * This value sets the mask value for the L2 address. + * A value of 0 will mask the corresponding bit from + * compare. */ - uint16_t target_id; + uint8_t l2_addr_mask[6]; + /* This value sets VLAN ID value for outer VLAN. */ + uint16_t l2_ovlan; /* - * A physical address pointer pointing to a host buffer that the - * command's response data will be written. This can be either a host - * physical address (HPA) or a guest physical address (GPA) and must - * point to a physically contiguous block of memory. + * This value sets the mask value for the ovlan id. + * A value of 0 will mask the corresponding bit from + * compare. */ - uint64_t resp_addr; + uint16_t l2_ovlan_mask; + /* This value sets VLAN ID value for inner VLAN. */ + uint16_t l2_ivlan; /* - * Port ID of port for which the table is being configured. - * The HWRM needs to check whether this function is allowed - * to configure TC BW assignment on this port. + * This value sets the mask value for the ivlan id. + * A value of 0 will mask the corresponding bit from + * compare. */ - uint16_t port_id; - uint8_t unused_0[6]; -} __attribute__((packed)); - -/* hwrm_queue_cos2bw_qcfg_output (size:896b/112B) */ -struct hwrm_queue_cos2bw_qcfg_output { - /* The specific error status for the command. */ - uint16_t error_code; - /* The HWRM command request type. */ - uint16_t req_type; - /* The sequence ID from the original command. */ - uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; - /* ID of CoS Queue 0. */ - uint8_t queue_id0; - uint8_t unused_0; - uint16_t unused_1; + uint16_t l2_ivlan_mask; + uint8_t unused_1[2]; /* - * Minimum BW allocated to CoS Queue. - * The HWRM will translate this value into byte counter and - * time interval used for this COS inside the device. + * This value sets the match value for the tunnel + * L2 MAC address. + * Destination MAC address for RX path. + * Source MAC address for TX path. */ - uint32_t queue_id0_min_bw; - /* The bandwidth value. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_SFT \ - 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_SCALE_LAST \ - HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_SFT \ - 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_LAST \ - HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_INVALID + uint8_t t_l2_addr[6]; + uint8_t unused_2[2]; /* - * Maximum BW allocated to CoS Queue. - * The HWRM will translate this value into byte counter and - * time interval used for this COS inside the device. + * This value sets the mask value for the tunnel L2 + * address. + * A value of 0 will mask the corresponding bit from + * compare. */ - uint32_t queue_id0_max_bw; - /* The bandwidth value. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_SFT \ - 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_SCALE_LAST \ - HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_SFT \ - 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_LAST \ - HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_INVALID - /* Transmission Selection Algorithm (TSA) for CoS Queue. */ - uint8_t queue_id0_tsa_assign; - /* Strict Priority */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_TSA_ASSIGN_SP \ + uint8_t t_l2_addr_mask[6]; + /* This value sets VLAN ID value for tunnel outer VLAN. */ + uint16_t t_l2_ovlan; + /* + * This value sets the mask value for the tunnel ovlan id. + * A value of 0 will mask the corresponding bit from + * compare. + */ + uint16_t t_l2_ovlan_mask; + /* This value sets VLAN ID value for tunnel inner VLAN. */ + uint16_t t_l2_ivlan; + /* + * This value sets the mask value for the tunnel ivlan id. + * A value of 0 will mask the corresponding bit from + * compare. + */ + uint16_t t_l2_ivlan_mask; + /* This value identifies the type of source of the packet. */ + uint8_t src_type; + /* Network port */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_NPORT UINT32_C(0x0) + /* Physical function */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_PF UINT32_C(0x1) + /* Virtual function */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VF UINT32_C(0x2) + /* Virtual NIC of a function */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VNIC UINT32_C(0x3) + /* Embedded processor for CFA management */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_KONG UINT32_C(0x4) + /* Embedded processor for OOB management */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_APE UINT32_C(0x5) + /* Embedded processor for RoCE */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_BONO UINT32_C(0x6) + /* Embedded processor for network proxy functions */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_TANG UINT32_C(0x7) + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_LAST \ + HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_TANG + uint8_t unused_3; + /* + * This value is the id of the source. + * For a network port, it represents port_id. + * For a physical function, it represents fid. + * For a virtual function, it represents vf_id. + * For a vnic, it represents vnic_id. + * For embedded processors, this id is not valid. + * + * Notes: + * 1. The function ID is implied if it src_id is + * not provided for a src_type that is either + */ + uint32_t src_id; + /* Tunnel Type. */ + uint8_t tunnel_type; + /* Non-tunnel */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \ + UINT32_C(0x0) + /* Virtual eXtensible Local Area Network (VXLAN) */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \ + UINT32_C(0x1) + /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \ + UINT32_C(0x2) + /* Generic Routing Encapsulation (GRE) inside Ethernet payload */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \ + UINT32_C(0x3) + /* IP in IP */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \ + UINT32_C(0x4) + /* Generic Network Virtualization Encapsulation (Geneve) */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \ + UINT32_C(0x5) + /* Multi-Protocol Label Switching (MPLS) */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \ + UINT32_C(0x6) + /* Stateless Transport Tunnel (STT) */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \ + UINT32_C(0x7) + /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \ + UINT32_C(0x8) + /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \ + UINT32_C(0x9) + /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \ + UINT32_C(0xa) + /* Use fixed layer 2 ether type of 0xFFFF */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2_ETYPE \ + UINT32_C(0xb) + /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \ + UINT32_C(0xc) + /* Any tunneled traffic */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \ + UINT32_C(0xff) + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_LAST \ + HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL + uint8_t unused_4; + /* + * If set, this value shall represent the + * Logical VNIC ID of the destination VNIC for the RX + * path and network port id of the destination port for + * the TX path. + */ + uint16_t dst_id; + /* + * Logical VNIC ID of the VNIC where traffic is + * mirrored. + */ + uint16_t mirror_vnic_id; + /* + * This hint is provided to help in placing + * the filter in the filter table. + */ + uint8_t pri_hint; + /* No preference */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_NO_PREFER \ UINT32_C(0x0) - /* Enhanced Transmission Selection */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_TSA_ASSIGN_ETS \ + /* Above the given filter */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_ABOVE_FILTER \ UINT32_C(0x1) - /* reserved. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_TSA_ASSIGN_RESERVED_FIRST \ + /* Below the given filter */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_BELOW_FILTER \ UINT32_C(0x2) - /* reserved. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_TSA_ASSIGN_RESERVED_LAST \ - UINT32_C(0xff) + /* As high as possible */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MAX \ + UINT32_C(0x3) + /* As low as possible */ + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MIN \ + UINT32_C(0x4) + #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_LAST \ + HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MIN + uint8_t unused_5; + uint32_t unused_6; /* - * Priority level for strict priority. Valid only when the - * tsa_assign is 0 - Strict Priority (SP) - * 0..7 - Valid values. - * 8..255 - Reserved. + * This is the ID of the filter that goes along with + * the pri_hint. + * + * This field is valid only for the following values. + * 1 - Above the given filter + * 2 - Below the given filter */ - uint8_t queue_id0_pri_lvl; + uint64_t l2_filter_id_hint; +} __rte_packed; + +/* hwrm_cfa_l2_filter_alloc_output (size:192b/24B) */ +struct hwrm_cfa_l2_filter_alloc_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; /* - * Weight used to allocate remaining BW for this COS after - * servicing guaranteed bandwidths for all COS. + * This value identifies a set of CFA data structures used for an L2 + * context. */ - uint8_t queue_id0_bw_weight; - /* ID of CoS Queue 1. */ - uint8_t queue_id1; + uint64_t l2_filter_id; /* - * Minimum BW allocated to CoS Queue. - * The HWRM will translate this value into byte counter and - * time interval used for this COS inside the device. + * The flow id value in bit 0-29 is the actual ID of the flow + * associated with this filter and it shall be used to match + * and associate the flow identifier returned in completion + * records. A value of 0xFFFFFFFF in the 32-bit flow_id field + * shall indicate no valid flow id. */ - uint32_t queue_id1_min_bw; - /* The bandwidth value. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_SFT \ - 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_SCALE_LAST \ - HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_SFT \ - 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_LAST \ - HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_INVALID + uint32_t flow_id; + /* Indicate the flow id value. */ + #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_VALUE_MASK \ + UINT32_C(0x3fffffff) + #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_VALUE_SFT 0 + /* Indicate type of the flow. */ + #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE \ + UINT32_C(0x40000000) + /* + * If this bit set to 0, then it indicates that the flow is + * internal flow. + */ + #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_INT \ + (UINT32_C(0x0) << 30) + /* + * If this bit is set to 1, then it indicates that the flow is + * external flow. + */ + #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT \ + (UINT32_C(0x1) << 30) + #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_LAST \ + HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT + /* Indicate the flow direction. */ + #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR \ + UINT32_C(0x80000000) + /* If this bit set to 0, then it indicates rx flow. */ + #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_RX \ + (UINT32_C(0x0) << 31) + /* If this bit is set to 1, then it indicates that tx flow. */ + #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_TX \ + (UINT32_C(0x1) << 31) + #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_LAST \ + HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_TX + uint8_t unused_0[3]; /* - * Maximum BW allocated to CoS queue. - * The HWRM will translate this value into byte counter and - * time interval used for this COS inside the device. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - uint32_t queue_id1_max_bw; - /* The bandwidth value. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_SFT \ - 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_SCALE_LAST \ - HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_SFT \ - 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_LAST \ - HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_INVALID - /* Transmission Selection Algorithm (TSA) for CoS Queue. */ - uint8_t queue_id1_tsa_assign; - /* Strict Priority */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_TSA_ASSIGN_SP \ - UINT32_C(0x0) - /* Enhanced Transmission Selection */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_TSA_ASSIGN_ETS \ - UINT32_C(0x1) - /* reserved. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_TSA_ASSIGN_RESERVED_FIRST \ - UINT32_C(0x2) - /* reserved. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_TSA_ASSIGN_RESERVED_LAST \ - UINT32_C(0xff) + uint8_t valid; +} __rte_packed; + +/*************************** + * hwrm_cfa_l2_filter_free * + ***************************/ + + +/* hwrm_cfa_l2_filter_free_input (size:192b/24B) */ +struct hwrm_cfa_l2_filter_free_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * Priority level for strict priority. Valid only when the - * tsa_assign is 0 - Strict Priority (SP) - * 0..7 - Valid values. - * 8..255 - Reserved. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - uint8_t queue_id1_pri_lvl; + uint16_t cmpl_ring; /* - * Weight used to allocate remaining BW for this COS after - * servicing guaranteed bandwidths for all COS. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - uint8_t queue_id1_bw_weight; - /* ID of CoS Queue 2. */ - uint8_t queue_id2; + uint16_t seq_id; /* - * Minimum BW allocated to CoS Queue. - * The HWRM will translate this value into byte counter and - * time interval used for this COS inside the device. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* + * This value identifies a set of CFA data structures used for an L2 + * context. + */ + uint64_t l2_filter_id; +} __rte_packed; + +/* hwrm_cfa_l2_filter_free_output (size:128b/16B) */ +struct hwrm_cfa_l2_filter_free_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - uint32_t queue_id2_min_bw; - /* The bandwidth value. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_SFT \ - 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_SCALE_LAST \ - HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_SFT \ - 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_LAST \ - HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_INVALID + uint8_t valid; +} __rte_packed; + +/************************** + * hwrm_cfa_l2_filter_cfg * + **************************/ + + +/* hwrm_cfa_l2_filter_cfg_input (size:320b/40B) */ +struct hwrm_cfa_l2_filter_cfg_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * Maximum BW allocated to CoS queue. - * The HWRM will translate this value into byte counter and - * time interval used for this COS inside the device. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - uint32_t queue_id2_max_bw; - /* The bandwidth value. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_SFT \ - 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_SCALE_LAST \ - HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_SFT \ - 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_LAST \ - HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_INVALID - /* Transmission Selection Algorithm (TSA) for CoS Queue. */ - uint8_t queue_id2_tsa_assign; - /* Strict Priority */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_TSA_ASSIGN_SP \ - UINT32_C(0x0) - /* Enhanced Transmission Selection */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_TSA_ASSIGN_ETS \ - UINT32_C(0x1) - /* reserved. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_TSA_ASSIGN_RESERVED_FIRST \ - UINT32_C(0x2) - /* reserved. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_TSA_ASSIGN_RESERVED_LAST \ - UINT32_C(0xff) + uint16_t cmpl_ring; /* - * Priority level for strict priority. Valid only when the - * tsa_assign is 0 - Strict Priority (SP) - * 0..7 - Valid values. - * 8..255 - Reserved. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - uint8_t queue_id2_pri_lvl; + uint16_t seq_id; /* - * Weight used to allocate remaining BW for this COS after - * servicing guaranteed bandwidths for all COS. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - uint8_t queue_id2_bw_weight; - /* ID of CoS Queue 3. */ - uint8_t queue_id3; + uint16_t target_id; /* - * Minimum BW allocated to CoS Queue. - * The HWRM will translate this value into byte counter and - * time interval used for this COS inside the device. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - uint32_t queue_id3_min_bw; - /* The bandwidth value. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_SFT \ - 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_SCALE_LAST \ - HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_SFT \ - 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_LAST \ - HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_INVALID + uint64_t resp_addr; + uint32_t flags; /* - * Maximum BW allocated to CoS queue. - * The HWRM will translate this value into byte counter and - * time interval used for this COS inside the device. + * Enumeration denoting the RX, TX type of the resource. + * This enumeration is used for resources that are similar for both + * TX and RX paths of the chip. */ - uint32_t queue_id3_max_bw; - /* The bandwidth value. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_SFT \ - 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_SCALE_LAST \ - HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_SFT \ - 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_LAST \ - HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_INVALID - /* Transmission Selection Algorithm (TSA) for CoS Queue. */ - uint8_t queue_id3_tsa_assign; - /* Strict Priority */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_TSA_ASSIGN_SP \ + #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH \ + UINT32_C(0x1) + /* tx path */ + #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_TX \ UINT32_C(0x0) - /* Enhanced Transmission Selection */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_TSA_ASSIGN_ETS \ + /* rx path */ + #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX \ + UINT32_C(0x1) + #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_LAST \ + HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX + /* + * Setting of this flag indicates drop action. If this flag is not set, + * then it should be considered accept action. + */ + #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_DROP \ + UINT32_C(0x2) + /* + * Enumeration denoting NO_ROCE_L2 to support old drivers. + * New driver L2 for only L2 traffic, ROCE for roce and l2 traffic + */ + #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_MASK \ + UINT32_C(0xc) + #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_SFT 2 + /* To support old drivers */ + #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_NO_ROCE_L2 \ + (UINT32_C(0x0) << 2) + /* Only L2 traffic */ + #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_L2 \ + (UINT32_C(0x1) << 2) + /* Roce & L2 traffic */ + #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_ROCE \ + (UINT32_C(0x2) << 2) + #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_LAST \ + HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_ROCE + uint32_t enables; + /* + * This bit must be '1' for the dst_id field to be + * configured. + */ + #define HWRM_CFA_L2_FILTER_CFG_INPUT_ENABLES_DST_ID \ UINT32_C(0x1) - /* reserved. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_TSA_ASSIGN_RESERVED_FIRST \ + /* + * This bit must be '1' for the new_mirror_vnic_id field to be + * configured. + */ + #define HWRM_CFA_L2_FILTER_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID \ UINT32_C(0x2) - /* reserved. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_TSA_ASSIGN_RESERVED_LAST \ - UINT32_C(0xff) /* - * Priority level for strict priority. Valid only when the - * tsa_assign is 0 - Strict Priority (SP) - * 0..7 - Valid values. - * 8..255 - Reserved. + * This value identifies a set of CFA data structures used for an L2 + * context. */ - uint8_t queue_id3_pri_lvl; + uint64_t l2_filter_id; /* - * Weight used to allocate remaining BW for this COS after - * servicing guaranteed bandwidths for all COS. + * If set, this value shall represent the + * Logical VNIC ID of the destination VNIC for the RX + * path and network port id of the destination port for + * the TX path. */ - uint8_t queue_id3_bw_weight; - /* ID of CoS Queue 4. */ - uint8_t queue_id4; + uint32_t dst_id; /* - * Minimum BW allocated to CoS Queue. - * The HWRM will translate this value into byte counter and - * time interval used for this COS inside the device. + * New Logical VNIC ID of the VNIC where traffic is + * mirrored. */ - uint32_t queue_id4_min_bw; - /* The bandwidth value. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_SFT \ - 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_SCALE_LAST \ - HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_SFT \ - 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_LAST \ - HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_INVALID + uint32_t new_mirror_vnic_id; +} __rte_packed; + +/* hwrm_cfa_l2_filter_cfg_output (size:128b/16B) */ +struct hwrm_cfa_l2_filter_cfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; /* - * Maximum BW allocated to CoS queue. - * The HWRM will translate this value into byte counter and - * time interval used for this COS inside the device. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - uint32_t queue_id4_max_bw; - /* The bandwidth value. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_SFT \ - 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_SCALE_LAST \ - HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_SFT \ - 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_LAST \ - HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_INVALID - /* Transmission Selection Algorithm (TSA) for CoS Queue. */ - uint8_t queue_id4_tsa_assign; - /* Strict Priority */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_TSA_ASSIGN_SP \ - UINT32_C(0x0) - /* Enhanced Transmission Selection */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_TSA_ASSIGN_ETS \ - UINT32_C(0x1) - /* reserved. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_TSA_ASSIGN_RESERVED_FIRST \ + uint8_t valid; +} __rte_packed; + +/*************************** + * hwrm_cfa_l2_set_rx_mask * + ***************************/ + + +/* hwrm_cfa_l2_set_rx_mask_input (size:448b/56B) */ +struct hwrm_cfa_l2_set_rx_mask_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* VNIC ID */ + uint32_t vnic_id; + uint32_t mask; + /* + * When this bit is '1', the function is requested to accept + * multi-cast packets specified by the multicast addr table. + */ + #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_MCAST \ UINT32_C(0x2) - /* reserved. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_TSA_ASSIGN_RESERVED_LAST \ - UINT32_C(0xff) /* - * Priority level for strict priority. Valid only when the - * tsa_assign is 0 - Strict Priority (SP) - * 0..7 - Valid values. - * 8..255 - Reserved. + * When this bit is '1', the function is requested to accept + * all multi-cast packets. + */ + #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ALL_MCAST \ + UINT32_C(0x4) + /* + * When this bit is '1', the function is requested to accept + * broadcast packets. + */ + #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_BCAST \ + UINT32_C(0x8) + /* + * When this bit is '1', the function is requested to be + * put in the promiscuous mode. + * + * The HWRM should accept any function to set up + * promiscuous mode. + * + * The HWRM shall follow the semantics below for the + * promiscuous mode support. + * # When partitioning is not enabled on a port + * (i.e. single PF on the port), then the PF shall + * be allowed to be in the promiscuous mode. When the + * PF is in the promiscuous mode, then it shall + * receive all host bound traffic on that port. + * # When partitioning is enabled on a port + * (i.e. multiple PFs per port) and a PF on that + * port is in the promiscuous mode, then the PF + * receives all traffic within that partition as + * identified by a unique identifier for the + * PF (e.g. S-Tag). If a unique outer VLAN + * for the PF is specified, then the setting of + * promiscuous mode on that PF shall result in the + * PF receiving all host bound traffic with matching + * outer VLAN. + * # A VF shall can be set in the promiscuous mode. + * In the promiscuous mode, the VF does not receive any + * traffic unless a unique outer VLAN for the + * VF is specified. If a unique outer VLAN + * for the VF is specified, then the setting of + * promiscuous mode on that VF shall result in the + * VF receiving all host bound traffic with the + * matching outer VLAN. + * # The HWRM shall allow the setting of promiscuous + * mode on a function independently from the + * promiscuous mode settings on other functions. + */ + #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_PROMISCUOUS \ + UINT32_C(0x10) + /* + * If this flag is set, the corresponding RX + * filters shall be set up to cover multicast/broadcast + * filters for the outermost Layer 2 destination MAC + * address field. */ - uint8_t queue_id4_pri_lvl; + #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_OUTERMOST \ + UINT32_C(0x20) /* - * Weight used to allocate remaining BW for this COS after - * servicing guaranteed bandwidths for all COS. + * If this flag is set, the corresponding RX + * filters shall be set up to cover multicast/broadcast + * filters for the VLAN-tagged packets that match the + * TPID and VID fields of VLAN tags in the VLAN tag + * table specified in this command. */ - uint8_t queue_id4_bw_weight; - /* ID of CoS Queue 5. */ - uint8_t queue_id5; + #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLANONLY \ + UINT32_C(0x40) /* - * Minimum BW allocated to CoS Queue. - * The HWRM will translate this value into byte counter and - * time interval used for this COS inside the device. + * If this flag is set, the corresponding RX + * filters shall be set up to cover multicast/broadcast + * filters for non-VLAN tagged packets and VLAN-tagged + * packets that match the TPID and VID fields of VLAN + * tags in the VLAN tag table specified in this command. */ - uint32_t queue_id5_min_bw; - /* The bandwidth value. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_SFT \ - 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_SCALE_LAST \ - HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_SFT \ - 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_LAST \ - HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_INVALID + #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLAN_NONVLAN \ + UINT32_C(0x80) /* - * Maximum BW allocated to CoS queue. - * The HWRM will translate this value into byte counter and - * time interval used for this COS inside the device. + * If this flag is set, the corresponding RX + * filters shall be set up to cover multicast/broadcast + * filters for non-VLAN tagged packets and VLAN-tagged + * packets matching any VLAN tag. + * + * If this flag is set, then the HWRM shall ignore + * VLAN tags specified in vlan_tag_tbl. + * + * If none of vlanonly, vlan_nonvlan, and anyvlan_nonvlan + * flags is set, then the HWRM shall ignore + * VLAN tags specified in vlan_tag_tbl. + * + * The HWRM client shall set at most one flag out of + * vlanonly, vlan_nonvlan, and anyvlan_nonvlan. */ - uint32_t queue_id5_max_bw; - /* The bandwidth value. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_SFT \ - 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_SCALE_LAST \ - HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_SFT \ - 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_LAST \ - HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_INVALID - /* Transmission Selection Algorithm (TSA) for CoS Queue. */ - uint8_t queue_id5_tsa_assign; - /* Strict Priority */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_TSA_ASSIGN_SP \ - UINT32_C(0x0) - /* Enhanced Transmission Selection */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_TSA_ASSIGN_ETS \ - UINT32_C(0x1) - /* reserved. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_TSA_ASSIGN_RESERVED_FIRST \ - UINT32_C(0x2) - /* reserved. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_TSA_ASSIGN_RESERVED_LAST \ - UINT32_C(0xff) + #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ANYVLAN_NONVLAN \ + UINT32_C(0x100) + /* This is the address for mcast address tbl. */ + uint64_t mc_tbl_addr; /* - * Priority level for strict priority. Valid only when the - * tsa_assign is 0 - Strict Priority (SP) - * 0..7 - Valid values. - * 8..255 - Reserved. + * This value indicates how many entries in mc_tbl are valid. + * Each entry is 6 bytes. */ - uint8_t queue_id5_pri_lvl; + uint32_t num_mc_entries; + uint8_t unused_0[4]; /* - * Weight used to allocate remaining BW for this COS after - * servicing guaranteed bandwidths for all COS. + * This is the address for VLAN tag table. + * Each VLAN entry in the table is 4 bytes of a VLAN tag + * including TPID, PCP, DEI, and VID fields in network byte + * order. */ - uint8_t queue_id5_bw_weight; - /* ID of CoS Queue 6. */ - uint8_t queue_id6; + uint64_t vlan_tag_tbl_addr; /* - * Minimum BW allocated to CoS Queue. - * The HWRM will translate this value into byte counter and - * time interval used for this COS inside the device. + * This value indicates how many entries in vlan_tag_tbl are + * valid. Each entry is 4 bytes. */ - uint32_t queue_id6_min_bw; - /* The bandwidth value. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_SFT \ - 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_SCALE_LAST \ - HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_SFT \ - 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_LAST \ - HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_INVALID + uint32_t num_vlan_tags; + uint8_t unused_1[4]; +} __rte_packed; + +/* hwrm_cfa_l2_set_rx_mask_output (size:128b/16B) */ +struct hwrm_cfa_l2_set_rx_mask_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/* hwrm_cfa_l2_set_rx_mask_cmd_err (size:64b/8B) */ +struct hwrm_cfa_l2_set_rx_mask_cmd_err { /* - * Maximum BW allocated to CoS queue. - * The HWRM will translate this value into byte counter and - * time interval used for this COS inside the device. + * command specific error codes that goes to + * the cmd_err field in Common HWRM Error Response. */ - uint32_t queue_id6_max_bw; - /* The bandwidth value. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_SFT \ - 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_SCALE_LAST \ - HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_SFT \ - 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_LAST \ - HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_INVALID - /* Transmission Selection Algorithm (TSA) for CoS Queue. */ - uint8_t queue_id6_tsa_assign; - /* Strict Priority */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_TSA_ASSIGN_SP \ + uint8_t code; + /* Unknown error */ + #define HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_UNKNOWN \ UINT32_C(0x0) - /* Enhanced Transmission Selection */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_TSA_ASSIGN_ETS \ + /* Unable to complete operation due to conflict with Ntuple Filter */ + #define HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_NTUPLE_FILTER_CONFLICT_ERR \ UINT32_C(0x1) - /* reserved. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_TSA_ASSIGN_RESERVED_FIRST \ - UINT32_C(0x2) - /* reserved. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_TSA_ASSIGN_RESERVED_LAST \ - UINT32_C(0xff) + #define HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_LAST \ + HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_NTUPLE_FILTER_CONFLICT_ERR + uint8_t unused_0[7]; +} __rte_packed; + +/******************************* + * hwrm_cfa_vlan_antispoof_cfg * + *******************************/ + + +/* hwrm_cfa_vlan_antispoof_cfg_input (size:256b/32B) */ +struct hwrm_cfa_vlan_antispoof_cfg_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * Priority level for strict priority. Valid only when the - * tsa_assign is 0 - Strict Priority (SP) - * 0..7 - Valid values. - * 8..255 - Reserved. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - uint8_t queue_id6_pri_lvl; + uint16_t cmpl_ring; /* - * Weight used to allocate remaining BW for this COS after - * servicing guaranteed bandwidths for all COS. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - uint8_t queue_id6_bw_weight; - /* ID of CoS Queue 7. */ - uint8_t queue_id7; + uint16_t seq_id; /* - * Minimum BW allocated to CoS Queue. - * The HWRM will translate this value into byte counter and - * time interval used for this COS inside the device. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - uint32_t queue_id7_min_bw; - /* The bandwidth value. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_SFT \ - 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_SCALE_LAST \ - HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_SFT \ - 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_LAST \ - HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_INVALID + uint16_t target_id; /* - * Maximum BW allocated to CoS queue. - * The HWRM will translate this value into byte counter and - * time interval used for this COS inside the device. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - uint32_t queue_id7_max_bw; - /* The bandwidth value. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_SFT \ - 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_SCALE_LAST \ - HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_SFT \ - 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_LAST \ - HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_INVALID - /* Transmission Selection Algorithm (TSA) for CoS Queue. */ - uint8_t queue_id7_tsa_assign; - /* Strict Priority */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_TSA_ASSIGN_SP \ - UINT32_C(0x0) - /* Enhanced Transmission Selection */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_TSA_ASSIGN_ETS \ - UINT32_C(0x1) - /* reserved. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_TSA_ASSIGN_RESERVED_FIRST \ - UINT32_C(0x2) - /* reserved. */ - #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_TSA_ASSIGN_RESERVED_LAST \ - UINT32_C(0xff) + uint64_t resp_addr; + /* + * Function ID of the function that is being configured. + * Only valid for a VF FID configured by the PF. + */ + uint16_t fid; + uint8_t unused_0[2]; + /* Number of VLAN entries in the vlan_tag_mask_tbl. */ + uint32_t num_vlan_entries; + /* + * The vlan_tag_mask_tbl_addr is the DMA address of the VLAN + * antispoof table. Each table entry contains the 16-bit TPID + * (0x8100 or 0x88a8 only), 16-bit VLAN ID, and a 16-bit mask, + * all in network order to match hwrm_cfa_l2_set_rx_mask. + * For an individual VLAN entry, the mask value should be 0xfff + * for the 12-bit VLAN ID. + */ + uint64_t vlan_tag_mask_tbl_addr; +} __rte_packed; + +/* hwrm_cfa_vlan_antispoof_cfg_output (size:128b/16B) */ +struct hwrm_cfa_vlan_antispoof_cfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/******************************** + * hwrm_cfa_vlan_antispoof_qcfg * + ********************************/ + + +/* hwrm_cfa_vlan_antispoof_qcfg_input (size:256b/32B) */ +struct hwrm_cfa_vlan_antispoof_qcfg_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; /* - * Priority level for strict priority. Valid only when the - * tsa_assign is 0 - Strict Priority (SP) - * 0..7 - Valid values. - * 8..255 - Reserved. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - uint8_t queue_id7_pri_lvl; + uint16_t seq_id; /* - * Weight used to allocate remaining BW for this COS after - * servicing guaranteed bandwidths for all COS. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - uint8_t queue_id7_bw_weight; - uint8_t unused_2[4]; + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* + * Function ID of the function that is being queried. + * Only valid for a VF FID queried by the PF. + */ + uint16_t fid; + uint8_t unused_0[2]; + /* + * Maximum number of VLAN entries the firmware is allowed to DMA + * to vlan_tag_mask_tbl. + */ + uint32_t max_vlan_entries; + /* + * The vlan_tag_mask_tbl_addr is the DMA address of the VLAN + * antispoof table to which firmware will DMA to. Each table + * entry will contain the 16-bit TPID (0x8100 or 0x88a8 only), + * 16-bit VLAN ID, and a 16-bit mask, all in network order to + * match hwrm_cfa_l2_set_rx_mask. For an individual VLAN entry, + * the mask value should be 0xfff for the 12-bit VLAN ID. + */ + uint64_t vlan_tag_mask_tbl_addr; +} __rte_packed; + +/* hwrm_cfa_vlan_antispoof_qcfg_output (size:128b/16B) */ +struct hwrm_cfa_vlan_antispoof_qcfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* Number of valid entries DMAd by firmware to vlan_tag_mask_tbl. */ + uint32_t num_vlan_entries; + uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/************************* - * hwrm_queue_cos2bw_cfg * - *************************/ +/******************************** + * hwrm_cfa_tunnel_filter_alloc * + ********************************/ -/* hwrm_queue_cos2bw_cfg_input (size:1024b/128B) */ -struct hwrm_queue_cos2bw_cfg_input { +/* hwrm_cfa_tunnel_filter_alloc_input (size:704b/88B) */ +struct hwrm_cfa_tunnel_filter_alloc_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -17137,7 +30063,8 @@ struct hwrm_queue_cos2bw_cfg_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -17149,1069 +30076,782 @@ struct hwrm_queue_cos2bw_cfg_input { */ uint64_t resp_addr; uint32_t flags; + /* Setting of this flag indicates the applicability to the loopback path. */ + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK \ + UINT32_C(0x1) uint32_t enables; /* - * If this bit is set to 1, then all queue_id0 related - * parameters in this command are valid. + * This bit must be '1' for the l2_filter_id field to be + * configured. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID0_VALID \ + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L2_FILTER_ID \ UINT32_C(0x1) /* - * If this bit is set to 1, then all queue_id1 related - * parameters in this command are valid. + * This bit must be '1' for the l2_addr field to be + * configured. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID1_VALID \ + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR \ UINT32_C(0x2) /* - * If this bit is set to 1, then all queue_id2 related - * parameters in this command are valid. + * This bit must be '1' for the l2_ivlan field to be + * configured. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID2_VALID \ + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN \ UINT32_C(0x4) /* - * If this bit is set to 1, then all queue_id3 related - * parameters in this command are valid. + * This bit must be '1' for the l3_addr field to be + * configured. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID3_VALID \ + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L3_ADDR \ UINT32_C(0x8) /* - * If this bit is set to 1, then all queue_id4 related - * parameters in this command are valid. + * This bit must be '1' for the l3_addr_type field to be + * configured. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID4_VALID \ + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L3_ADDR_TYPE \ UINT32_C(0x10) /* - * If this bit is set to 1, then all queue_id5 related - * parameters in this command are valid. + * This bit must be '1' for the t_l3_addr_type field to be + * configured. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID5_VALID \ + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_T_L3_ADDR_TYPE \ UINT32_C(0x20) /* - * If this bit is set to 1, then all queue_id6 related - * parameters in this command are valid. + * This bit must be '1' for the t_l3_addr field to be + * configured. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID6_VALID \ + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_T_L3_ADDR \ UINT32_C(0x40) /* - * If this bit is set to 1, then all queue_id7 related - * parameters in this command are valid. + * This bit must be '1' for the tunnel_type field to be + * configured. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID7_VALID \ + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \ UINT32_C(0x80) /* - * Port ID of port for which the table is being configured. - * The HWRM needs to check whether this function is allowed - * to configure TC BW assignment on this port. - */ - uint16_t port_id; - /* ID of CoS Queue 0. */ - uint8_t queue_id0; - uint8_t unused_0; - /* - * Minimum BW allocated to CoS Queue. - * The HWRM will translate this value into byte counter and - * time interval used for this COS inside the device. + * This bit must be '1' for the vni field to be + * configured. */ - uint32_t queue_id0_min_bw; - /* The bandwidth value. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_SFT \ - 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_SCALE_LAST \ - HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_SFT \ - 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_LAST \ - HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_INVALID + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_VNI \ + UINT32_C(0x100) /* - * Maximum BW allocated to CoS Queue. - * The HWRM will translate this value into byte counter and - * time interval used for this COS inside the device. + * This bit must be '1' for the dst_vnic_id field to be + * configured. */ - uint32_t queue_id0_max_bw; - /* The bandwidth value. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_SFT \ - 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_SCALE_LAST \ - HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_SFT \ - 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_LAST \ - HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_INVALID - /* Transmission Selection Algorithm (TSA) for CoS Queue. */ - uint8_t queue_id0_tsa_assign; - /* Strict Priority */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_TSA_ASSIGN_SP \ - UINT32_C(0x0) - /* Enhanced Transmission Selection */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_TSA_ASSIGN_ETS \ - UINT32_C(0x1) - /* reserved. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_TSA_ASSIGN_RESERVED_FIRST \ - UINT32_C(0x2) - /* reserved. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_TSA_ASSIGN_RESERVED_LAST \ - UINT32_C(0xff) + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_DST_VNIC_ID \ + UINT32_C(0x200) /* - * Priority level for strict priority. Valid only when the - * tsa_assign is 0 - Strict Priority (SP) - * 0..7 - Valid values. - * 8..255 - Reserved. + * This bit must be '1' for the mirror_vnic_id field to be + * configured. */ - uint8_t queue_id0_pri_lvl; + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \ + UINT32_C(0x400) /* - * Weight used to allocate remaining BW for this COS after - * servicing guaranteed bandwidths for all COS. + * This value identifies a set of CFA data structures used for an L2 + * context. */ - uint8_t queue_id0_bw_weight; - /* ID of CoS Queue 1. */ - uint8_t queue_id1; + uint64_t l2_filter_id; /* - * Minimum BW allocated to CoS Queue. - * The HWRM will translate this value into byte counter and - * time interval used for this COS inside the device. + * This value sets the match value for the inner L2 + * MAC address. + * Destination MAC address for RX path. + * Source MAC address for TX path. */ - uint32_t queue_id1_min_bw; - /* The bandwidth value. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_SFT \ - 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_SCALE_LAST \ - HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_SFT \ - 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_LAST \ - HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_INVALID + uint8_t l2_addr[6]; /* - * Maximum BW allocated to CoS queue. - * The HWRM will translate this value into byte counter and - * time interval used for this COS inside the device. + * This value sets VLAN ID value for inner VLAN. + * Only 12-bits of VLAN ID are used in setting the filter. */ - uint32_t queue_id1_max_bw; - /* The bandwidth value. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_SFT \ - 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_SCALE_LAST \ - HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_SFT \ - 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_LAST \ - HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_INVALID - /* Transmission Selection Algorithm (TSA) for CoS Queue. */ - uint8_t queue_id1_tsa_assign; - /* Strict Priority */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_TSA_ASSIGN_SP \ - UINT32_C(0x0) - /* Enhanced Transmission Selection */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_TSA_ASSIGN_ETS \ - UINT32_C(0x1) - /* reserved. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_TSA_ASSIGN_RESERVED_FIRST \ - UINT32_C(0x2) - /* reserved. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_TSA_ASSIGN_RESERVED_LAST \ - UINT32_C(0xff) + uint16_t l2_ivlan; /* - * Priority level for strict priority. Valid only when the - * tsa_assign is 0 - Strict Priority (SP) - * 0..7 - Valid values. - * 8..255 - Reserved. + * The value of inner destination IP address to be used in filtering. + * For IPv4, first four bytes represent the IP address. */ - uint8_t queue_id1_pri_lvl; + uint32_t l3_addr[4]; /* - * Weight used to allocate remaining BW for this COS after - * servicing guaranteed bandwidths for all COS. + * The value of tunnel destination IP address to be used in filtering. + * For IPv4, first four bytes represent the IP address. */ - uint8_t queue_id1_bw_weight; - /* ID of CoS Queue 2. */ - uint8_t queue_id2; + uint32_t t_l3_addr[4]; /* - * Minimum BW allocated to CoS Queue. - * The HWRM will translate this value into byte counter and - * time interval used for this COS inside the device. + * This value indicates the type of inner IP address. + * 4 - IPv4 + * 6 - IPv6 + * All others are invalid. */ - uint32_t queue_id2_min_bw; - /* The bandwidth value. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_SFT \ - 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_SCALE_LAST \ - HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_SFT \ - 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_LAST \ - HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_INVALID + uint8_t l3_addr_type; /* - * Maximum BW allocated to CoS queue. - * The HWRM will translate this value into byte counter and - * time interval used for this COS inside the device. + * This value indicates the type of tunnel IP address. + * 4 - IPv4 + * 6 - IPv6 + * All others are invalid. */ - uint32_t queue_id2_max_bw; - /* The bandwidth value. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_SFT \ - 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_SCALE_LAST \ - HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_SFT \ - 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_LAST \ - HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_INVALID - /* Transmission Selection Algorithm (TSA) for CoS Queue. */ - uint8_t queue_id2_tsa_assign; - /* Strict Priority */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_TSA_ASSIGN_SP \ + uint8_t t_l3_addr_type; + /* Tunnel Type. */ + uint8_t tunnel_type; + /* Non-tunnel */ + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \ UINT32_C(0x0) - /* Enhanced Transmission Selection */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_TSA_ASSIGN_ETS \ + /* Virtual eXtensible Local Area Network (VXLAN) */ + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \ UINT32_C(0x1) - /* reserved. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_TSA_ASSIGN_RESERVED_FIRST \ + /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \ UINT32_C(0x2) - /* reserved. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_TSA_ASSIGN_RESERVED_LAST \ + /* Generic Routing Encapsulation (GRE) inside Ethernet payload */ + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \ + UINT32_C(0x3) + /* IP in IP */ + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \ + UINT32_C(0x4) + /* Generic Network Virtualization Encapsulation (Geneve) */ + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \ + UINT32_C(0x5) + /* Multi-Protocol Label Switching (MPLS) */ + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \ + UINT32_C(0x6) + /* Stateless Transport Tunnel (STT) */ + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \ + UINT32_C(0x7) + /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \ + UINT32_C(0x8) + /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \ + UINT32_C(0x9) + /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \ + UINT32_C(0xa) + /* Use fixed layer 2 ether type of 0xFFFF */ + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2_ETYPE \ + UINT32_C(0xb) + /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */ + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \ + UINT32_C(0xc) + /* Any tunneled traffic */ + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \ UINT32_C(0xff) + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_LAST \ + HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL /* - * Priority level for strict priority. Valid only when the - * tsa_assign is 0 - Strict Priority (SP) - * 0..7 - Valid values. - * 8..255 - Reserved. + * tunnel_flags allows the user to indicate the tunnel tag detection + * for the tunnel type specified in tunnel_type. */ - uint8_t queue_id2_pri_lvl; + uint8_t tunnel_flags; /* - * Weight used to allocate remaining BW for this COS after - * servicing guaranteed bandwidths for all COS. + * If the tunnel_type is geneve, then this bit indicates if we + * need to match the geneve OAM packet. + * If the tunnel_type is nvgre or gre, then this bit indicates if + * we need to detect checksum present bit in geneve header. + * If the tunnel_type is mpls, then this bit indicates if we need + * to match mpls packet with explicit IPV4/IPV6 null header. */ - uint8_t queue_id2_bw_weight; - /* ID of CoS Queue 3. */ - uint8_t queue_id3; + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_FLAGS_TUN_FLAGS_OAM_CHECKSUM_EXPLHDR \ + UINT32_C(0x1) /* - * Minimum BW allocated to CoS Queue. - * The HWRM will translate this value into byte counter and - * time interval used for this COS inside the device. + * If the tunnel_type is geneve, then this bit indicates if we + * need to detect the critical option bit set in the oam packet. + * If the tunnel_type is nvgre or gre, then this bit indicates + * if we need to match nvgre packets with key present bit set in + * gre header. + * If the tunnel_type is mpls, then this bit indicates if we + * need to match mpls packet with S bit from inner/second label. */ - uint32_t queue_id3_min_bw; - /* The bandwidth value. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_SFT \ - 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_SCALE_LAST \ - HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_SFT \ - 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_LAST \ - HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_INVALID + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_FLAGS_TUN_FLAGS_CRITICAL_OPT_S1 \ + UINT32_C(0x2) /* - * Maximum BW allocated to CoS queue. - * The HWRM will translate this value into byte counter and - * time interval used for this COS inside the device. + * If the tunnel_type is geneve, then this bit indicates if we + * need to match geneve packet with extended header bit set in + * geneve header. + * If the tunnel_type is nvgre or gre, then this bit indicates + * if we need to match nvgre packets with sequence number + * present bit set in gre header. + * If the tunnel_type is mpls, then this bit indicates if we + * need to match mpls packet with S bit from out/first label. */ - uint32_t queue_id3_max_bw; - /* The bandwidth value. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_SFT \ - 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_SCALE_LAST \ - HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_SFT \ - 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_LAST \ - HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_INVALID - /* Transmission Selection Algorithm (TSA) for CoS Queue. */ - uint8_t queue_id3_tsa_assign; - /* Strict Priority */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_TSA_ASSIGN_SP \ - UINT32_C(0x0) - /* Enhanced Transmission Selection */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_TSA_ASSIGN_ETS \ - UINT32_C(0x1) - /* reserved. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_TSA_ASSIGN_RESERVED_FIRST \ - UINT32_C(0x2) - /* reserved. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_TSA_ASSIGN_RESERVED_LAST \ - UINT32_C(0xff) + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_FLAGS_TUN_FLAGS_EXTHDR_SEQNUM_S0 \ + UINT32_C(0x4) /* - * Priority level for strict priority. Valid only when the - * tsa_assign is 0 - Strict Priority (SP) - * 0..7 - Valid values. - * 8..255 - Reserved. + * Virtual Network Identifier (VNI). Only valid with + * tunnel_types VXLAN, NVGRE, and Geneve. + * Only lower 24-bits of VNI field are used + * in setting up the filter. */ - uint8_t queue_id3_pri_lvl; + uint32_t vni; + /* Logical VNIC ID of the destination VNIC. */ + uint32_t dst_vnic_id; /* - * Weight used to allocate remaining BW for this COS after - * servicing guaranteed bandwidths for all COS. + * Logical VNIC ID of the VNIC where traffic is + * mirrored. */ - uint8_t queue_id3_bw_weight; - /* ID of CoS Queue 4. */ - uint8_t queue_id4; + uint32_t mirror_vnic_id; +} __rte_packed; + +/* hwrm_cfa_tunnel_filter_alloc_output (size:192b/24B) */ +struct hwrm_cfa_tunnel_filter_alloc_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* This value is an opaque id into CFA data structures. */ + uint64_t tunnel_filter_id; /* - * Minimum BW allocated to CoS Queue. - * The HWRM will translate this value into byte counter and - * time interval used for this COS inside the device. + * The flow id value in bit 0-29 is the actual ID of the flow + * associated with this filter and it shall be used to match + * and associate the flow identifier returned in completion + * records. A value of 0xFFFFFFFF in the 32-bit flow_id field + * shall indicate no valid flow id. */ - uint32_t queue_id4_min_bw; - /* The bandwidth value. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_SFT \ - 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_SCALE_LAST \ - HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_SFT \ - 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_LAST \ - HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_INVALID + uint32_t flow_id; + /* Indicate the flow id value. */ + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_VALUE_MASK \ + UINT32_C(0x3fffffff) + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_VALUE_SFT 0 + /* Indicate type of the flow. */ + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE \ + UINT32_C(0x40000000) + /* + * If this bit set to 0, then it indicates that the flow is + * internal flow. + */ + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_INT \ + (UINT32_C(0x0) << 30) + /* + * If this bit is set to 1, then it indicates that the flow is + * external flow. + */ + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT \ + (UINT32_C(0x1) << 30) + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_LAST \ + HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT + /* Indicate the flow direction. */ + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR \ + UINT32_C(0x80000000) + /* If this bit set to 0, then it indicates rx flow. */ + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_RX \ + (UINT32_C(0x0) << 31) + /* If this bit is set to 1, then it indicates that tx flow. */ + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_TX \ + (UINT32_C(0x1) << 31) + #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_LAST \ + HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_TX + uint8_t unused_0[3]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/******************************* + * hwrm_cfa_tunnel_filter_free * + *******************************/ + + +/* hwrm_cfa_tunnel_filter_free_input (size:192b/24B) */ +struct hwrm_cfa_tunnel_filter_free_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * Maximum BW allocated to CoS queue. - * The HWRM will translate this value into byte counter and - * time interval used for this COS inside the device. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - uint32_t queue_id4_max_bw; - /* The bandwidth value. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_SFT \ - 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_SCALE_LAST \ - HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_SFT \ - 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_LAST \ - HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_INVALID - /* Transmission Selection Algorithm (TSA) for CoS Queue. */ - uint8_t queue_id4_tsa_assign; - /* Strict Priority */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_TSA_ASSIGN_SP \ - UINT32_C(0x0) - /* Enhanced Transmission Selection */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_TSA_ASSIGN_ETS \ - UINT32_C(0x1) - /* reserved. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_TSA_ASSIGN_RESERVED_FIRST \ - UINT32_C(0x2) - /* reserved. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_TSA_ASSIGN_RESERVED_LAST \ - UINT32_C(0xff) + uint16_t cmpl_ring; /* - * Priority level for strict priority. Valid only when the - * tsa_assign is 0 - Strict Priority (SP) - * 0..7 - Valid values. - * 8..255 - Reserved. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - uint8_t queue_id4_pri_lvl; + uint16_t seq_id; /* - * Weight used to allocate remaining BW for this COS after - * servicing guaranteed bandwidths for all COS. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - uint8_t queue_id4_bw_weight; - /* ID of CoS Queue 5. */ - uint8_t queue_id5; + uint16_t target_id; /* - * Minimum BW allocated to CoS Queue. - * The HWRM will translate this value into byte counter and - * time interval used for this COS inside the device. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - uint32_t queue_id5_min_bw; - /* The bandwidth value. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_SFT \ - 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_SCALE_LAST \ - HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_SFT \ - 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_LAST \ - HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_INVALID + uint64_t resp_addr; + /* This value is an opaque id into CFA data structures. */ + uint64_t tunnel_filter_id; +} __rte_packed; + +/* hwrm_cfa_tunnel_filter_free_output (size:128b/16B) */ +struct hwrm_cfa_tunnel_filter_free_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; /* - * Maximum BW allocated to CoS queue. - * The HWRM will translate this value into byte counter and - * time interval used for this COS inside the device. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - uint32_t queue_id5_max_bw; - /* The bandwidth value. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_SFT \ - 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_SCALE_LAST \ - HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_SFT \ - 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_LAST \ - HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_INVALID - /* Transmission Selection Algorithm (TSA) for CoS Queue. */ - uint8_t queue_id5_tsa_assign; - /* Strict Priority */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_TSA_ASSIGN_SP \ + uint8_t valid; +} __rte_packed; + +/*************************************** + * hwrm_cfa_redirect_tunnel_type_alloc * + ***************************************/ + + +/* hwrm_cfa_redirect_tunnel_type_alloc_input (size:192b/24B) */ +struct hwrm_cfa_redirect_tunnel_type_alloc_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* The destination function id, to whom the traffic is redirected. */ + uint16_t dest_fid; + /* Tunnel Type. */ + uint8_t tunnel_type; + /* Non-tunnel */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \ UINT32_C(0x0) - /* Enhanced Transmission Selection */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_TSA_ASSIGN_ETS \ + /* Virtual eXtensible Local Area Network (VXLAN) */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \ UINT32_C(0x1) - /* reserved. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_TSA_ASSIGN_RESERVED_FIRST \ + /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \ UINT32_C(0x2) - /* reserved. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_TSA_ASSIGN_RESERVED_LAST \ + /* Generic Routing Encapsulation (GRE) inside Ethernet payload */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \ + UINT32_C(0x3) + /* IP in IP */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_IPIP \ + UINT32_C(0x4) + /* Generic Network Virtualization Encapsulation (Geneve) */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \ + UINT32_C(0x5) + /* Multi-Protocol Label Switching (MPLS) */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_MPLS \ + UINT32_C(0x6) + /* Stateless Transport Tunnel (STT) */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_STT \ + UINT32_C(0x7) + /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \ + UINT32_C(0x8) + /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \ + UINT32_C(0x9) + /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \ + UINT32_C(0xa) + /* Use fixed layer 2 ether type of 0xFFFF */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_L2_ETYPE \ + UINT32_C(0xb) + /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \ + UINT32_C(0xc) + /* Any tunneled traffic */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \ UINT32_C(0xff) + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_LAST \ + HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL + /* Tunnel alloc flags. */ + uint8_t flags; + /* Setting of this flag indicates modify existing redirect tunnel to new destination function ID. */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_FLAGS_MODIFY_DST \ + UINT32_C(0x1) + uint8_t unused_0[4]; +} __rte_packed; + +/* hwrm_cfa_redirect_tunnel_type_alloc_output (size:128b/16B) */ +struct hwrm_cfa_redirect_tunnel_type_alloc_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; /* - * Priority level for strict priority. Valid only when the - * tsa_assign is 0 - Strict Priority (SP) - * 0..7 - Valid values. - * 8..255 - Reserved. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - uint8_t queue_id5_pri_lvl; + uint8_t valid; +} __rte_packed; + +/************************************** + * hwrm_cfa_redirect_tunnel_type_free * + **************************************/ + + +/* hwrm_cfa_redirect_tunnel_type_free_input (size:192b/24B) */ +struct hwrm_cfa_redirect_tunnel_type_free_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * Weight used to allocate remaining BW for this COS after - * servicing guaranteed bandwidths for all COS. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - uint8_t queue_id5_bw_weight; - /* ID of CoS Queue 6. */ - uint8_t queue_id6; + uint16_t cmpl_ring; /* - * Minimum BW allocated to CoS Queue. - * The HWRM will translate this value into byte counter and - * time interval used for this COS inside the device. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - uint32_t queue_id6_min_bw; - /* The bandwidth value. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_SFT \ - 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_SCALE_LAST \ - HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_SFT \ - 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_LAST \ - HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_INVALID + uint16_t seq_id; /* - * Maximum BW allocated to CoS queue. - * The HWRM will translate this value into byte counter and - * time interval used for this COS inside the device. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - uint32_t queue_id6_max_bw; - /* The bandwidth value. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_SFT \ - 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_SCALE_LAST \ - HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_SFT \ - 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_LAST \ - HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_INVALID - /* Transmission Selection Algorithm (TSA) for CoS Queue. */ - uint8_t queue_id6_tsa_assign; - /* Strict Priority */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_TSA_ASSIGN_SP \ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* The destination function id, to whom the traffic is redirected. */ + uint16_t dest_fid; + /* Tunnel Type. */ + uint8_t tunnel_type; + /* Non-tunnel */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_NONTUNNEL \ UINT32_C(0x0) - /* Enhanced Transmission Selection */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_TSA_ASSIGN_ETS \ + /* Virtual eXtensible Local Area Network (VXLAN) */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_VXLAN \ UINT32_C(0x1) - /* reserved. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_TSA_ASSIGN_RESERVED_FIRST \ + /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_NVGRE \ UINT32_C(0x2) - /* reserved. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_TSA_ASSIGN_RESERVED_LAST \ + /* Generic Routing Encapsulation (GRE) inside Ethernet payload */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_L2GRE \ + UINT32_C(0x3) + /* IP in IP */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_IPIP \ + UINT32_C(0x4) + /* Generic Network Virtualization Encapsulation (Geneve) */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_GENEVE \ + UINT32_C(0x5) + /* Multi-Protocol Label Switching (MPLS) */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_MPLS \ + UINT32_C(0x6) + /* Stateless Transport Tunnel (STT) */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_STT \ + UINT32_C(0x7) + /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_IPGRE \ + UINT32_C(0x8) + /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_VXLAN_V4 \ + UINT32_C(0x9) + /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_IPGRE_V1 \ + UINT32_C(0xa) + /* Use fixed layer 2 ether type of 0xFFFF */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_L2_ETYPE \ + UINT32_C(0xb) + /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \ + UINT32_C(0xc) + /* Any tunneled traffic */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_ANYTUNNEL \ UINT32_C(0xff) + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_LAST \ + HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_ANYTUNNEL + uint8_t unused_0[5]; +} __rte_packed; + +/* hwrm_cfa_redirect_tunnel_type_free_output (size:128b/16B) */ +struct hwrm_cfa_redirect_tunnel_type_free_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/************************************** + * hwrm_cfa_redirect_tunnel_type_info * + **************************************/ + + +/* hwrm_cfa_redirect_tunnel_type_info_input (size:192b/24B) */ +struct hwrm_cfa_redirect_tunnel_type_info_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * Priority level for strict priority. Valid only when the - * tsa_assign is 0 - Strict Priority (SP) - * 0..7 - Valid values. - * 8..255 - Reserved. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - uint8_t queue_id6_pri_lvl; + uint16_t cmpl_ring; /* - * Weight used to allocate remaining BW for this COS after - * servicing guaranteed bandwidths for all COS. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - uint8_t queue_id6_bw_weight; - /* ID of CoS Queue 7. */ - uint8_t queue_id7; + uint16_t seq_id; /* - * Minimum BW allocated to CoS Queue. - * The HWRM will translate this value into byte counter and - * time interval used for this COS inside the device. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - uint32_t queue_id7_min_bw; - /* The bandwidth value. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_SFT \ - 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE_LAST \ - HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_SFT \ - 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_LAST \ - HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_INVALID + uint16_t target_id; /* - * Maximum BW allocated to CoS queue. - * The HWRM will translate this value into byte counter and - * time interval used for this COS inside the device. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - uint32_t queue_id7_max_bw; - /* The bandwidth value. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_SFT \ - 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE_LAST \ - HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_SFT \ - 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_LAST \ - HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_INVALID - /* Transmission Selection Algorithm (TSA) for CoS Queue. */ - uint8_t queue_id7_tsa_assign; - /* Strict Priority */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_SP \ + uint64_t resp_addr; + /* The source function id. */ + uint16_t src_fid; + /* Tunnel Type. */ + uint8_t tunnel_type; + /* Non-tunnel */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_NONTUNNEL \ UINT32_C(0x0) - /* Enhanced Transmission Selection */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_ETS \ + /* Virtual eXtensible Local Area Network (VXLAN) */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_VXLAN \ UINT32_C(0x1) - /* reserved. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_RESERVED_FIRST \ + /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_NVGRE \ UINT32_C(0x2) - /* reserved. */ - #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_RESERVED_LAST \ + /* Generic Routing Encapsulation (GRE) inside Ethernet payload */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_L2GRE \ + UINT32_C(0x3) + /* IP in IP */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_IPIP \ + UINT32_C(0x4) + /* Generic Network Virtualization Encapsulation (Geneve) */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_GENEVE \ + UINT32_C(0x5) + /* Multi-Protocol Label Switching (MPLS) */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_MPLS \ + UINT32_C(0x6) + /* Stateless Transport Tunnel (STT) */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_STT \ + UINT32_C(0x7) + /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_IPGRE \ + UINT32_C(0x8) + /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_VXLAN_V4 \ + UINT32_C(0x9) + /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_IPGRE_V1 \ + UINT32_C(0xa) + /* Use fixed layer 2 ether type of 0xFFFF */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_L2_ETYPE \ + UINT32_C(0xb) + /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \ + UINT32_C(0xc) + /* Any tunneled traffic */ + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_ANYTUNNEL \ UINT32_C(0xff) + #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_LAST \ + HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_ANYTUNNEL + uint8_t unused_0[5]; +} __rte_packed; + +/* hwrm_cfa_redirect_tunnel_type_info_output (size:128b/16B) */ +struct hwrm_cfa_redirect_tunnel_type_info_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* The destination function id, to whom the traffic is redirected. */ + uint16_t dest_fid; + uint8_t unused_0[5]; /* - * Priority level for strict priority. Valid only when the - * tsa_assign is 0 - Strict Priority (SP) - * 0..7 - Valid values. - * 8..255 - Reserved. - */ - uint8_t queue_id7_pri_lvl; - /* - * Weight used to allocate remaining BW for this COS after - * servicing guaranteed bandwidths for all COS. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - uint8_t queue_id7_bw_weight; - uint8_t unused_1[5]; -} __attribute__((packed)); + uint8_t valid; +} __rte_packed; + +/* hwrm_vxlan_ipv4_hdr (size:128b/16B) */ +struct hwrm_vxlan_ipv4_hdr { + /* IPv4 version and header length. */ + uint8_t ver_hlen; + /* IPv4 header length */ + #define HWRM_VXLAN_IPV4_HDR_VER_HLEN_HEADER_LENGTH_MASK UINT32_C(0xf) + #define HWRM_VXLAN_IPV4_HDR_VER_HLEN_HEADER_LENGTH_SFT 0 + /* Version */ + #define HWRM_VXLAN_IPV4_HDR_VER_HLEN_VERSION_MASK UINT32_C(0xf0) + #define HWRM_VXLAN_IPV4_HDR_VER_HLEN_VERSION_SFT 4 + /* IPv4 type of service. */ + uint8_t tos; + /* IPv4 identification. */ + uint16_t ip_id; + /* IPv4 flags and offset. */ + uint16_t flags_frag_offset; + /* IPv4 TTL. */ + uint8_t ttl; + /* IPv4 protocol. */ + uint8_t protocol; + /* IPv4 source address. */ + uint32_t src_ip_addr; + /* IPv4 destination address. */ + uint32_t dest_ip_addr; +} __rte_packed; + +/* hwrm_vxlan_ipv6_hdr (size:320b/40B) */ +struct hwrm_vxlan_ipv6_hdr { + /* IPv6 version, traffic class and flow label. */ + uint32_t ver_tc_flow_label; + /* IPv6 version shift */ + #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_VER_SFT \ + UINT32_C(0x1c) + /* IPv6 version mask */ + #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_VER_MASK \ + UINT32_C(0xf0000000) + /* IPv6 TC shift */ + #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_TC_SFT \ + UINT32_C(0x14) + /* IPv6 TC mask */ + #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_TC_MASK \ + UINT32_C(0xff00000) + /* IPv6 flow label shift */ + #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_FLOW_LABEL_SFT \ + UINT32_C(0x0) + /* IPv6 flow label mask */ + #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_FLOW_LABEL_MASK \ + UINT32_C(0xfffff) + #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_LAST \ + HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_FLOW_LABEL_MASK + /* IPv6 payload length. */ + uint16_t payload_len; + /* IPv6 next header. */ + uint8_t next_hdr; + /* IPv6 TTL. */ + uint8_t ttl; + /* IPv6 source address. */ + uint32_t src_ip_addr[4]; + /* IPv6 destination address. */ + uint32_t dest_ip_addr[4]; +} __rte_packed; -/* hwrm_queue_cos2bw_cfg_output (size:128b/16B) */ -struct hwrm_queue_cos2bw_cfg_output { - /* The specific error status for the command. */ - uint16_t error_code; - /* The HWRM command request type. */ - uint16_t req_type; - /* The sequence ID from the original command. */ - uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; - uint8_t unused_0[7]; - /* - * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' - * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. - */ - uint8_t valid; -} __attribute__((packed)); +/* hwrm_cfa_encap_data_vxlan (size:640b/80B) */ +struct hwrm_cfa_encap_data_vxlan { + /* Source MAC address. */ + uint8_t src_mac_addr[6]; + /* reserved. */ + uint16_t unused_0; + /* Destination MAC address. */ + uint8_t dst_mac_addr[6]; + /* Number of VLAN tags. */ + uint8_t num_vlan_tags; + /* reserved. */ + uint8_t unused_1; + /* Outer VLAN TPID. */ + uint16_t ovlan_tpid; + /* Outer VLAN TCI. */ + uint16_t ovlan_tci; + /* Inner VLAN TPID. */ + uint16_t ivlan_tpid; + /* Inner VLAN TCI. */ + uint16_t ivlan_tci; + /* L3 header fields. */ + uint32_t l3[10]; + /* IP version mask. */ + #define HWRM_CFA_ENCAP_DATA_VXLAN_L3_VER_MASK UINT32_C(0xf) + /* IP version 4. */ + #define HWRM_CFA_ENCAP_DATA_VXLAN_L3_VER_IPV4 UINT32_C(0x4) + /* IP version 6. */ + #define HWRM_CFA_ENCAP_DATA_VXLAN_L3_VER_IPV6 UINT32_C(0x6) + #define HWRM_CFA_ENCAP_DATA_VXLAN_L3_LAST \ + HWRM_CFA_ENCAP_DATA_VXLAN_L3_VER_IPV6 + /* UDP source port. */ + uint16_t src_port; + /* UDP destination port. */ + uint16_t dst_port; + /* VXLAN Network Identifier. */ + uint32_t vni; + /* 3 bytes VXLAN header reserve fields from 1st dword of the VXLAN header. */ + uint8_t hdr_rsvd0[3]; + /* 1 byte VXLAN header reserve field from 2nd dword of the VXLAN header. */ + uint8_t hdr_rsvd1; + /* VXLAN header flags field. */ + uint8_t hdr_flags; + uint8_t unused[3]; +} __rte_packed; -/******************* - * hwrm_vnic_alloc * - *******************/ +/******************************* + * hwrm_cfa_encap_record_alloc * + *******************************/ -/* hwrm_vnic_alloc_input (size:192b/24B) */ -struct hwrm_vnic_alloc_input { +/* hwrm_cfa_encap_record_alloc_input (size:832b/104B) */ +struct hwrm_cfa_encap_record_alloc_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -18228,7 +30868,8 @@ struct hwrm_vnic_alloc_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -18240,16 +30881,63 @@ struct hwrm_vnic_alloc_input { */ uint64_t resp_addr; uint32_t flags; + /* Setting of this flag indicates the applicability to the loopback path. */ + #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_FLAGS_LOOPBACK \ + UINT32_C(0x1) /* - * When this bit is '1', this VNIC is requested to - * be the default VNIC for this function. + * Setting of this flag indicates this encap record is external encap record. + * Resetting of this flag indicates this flag is internal encap record and + * this is the default setting. */ - #define HWRM_VNIC_ALLOC_INPUT_FLAGS_DEFAULT UINT32_C(0x1) - uint8_t unused_0[4]; -} __attribute__((packed)); + #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_FLAGS_EXTERNAL \ + UINT32_C(0x2) + /* Encapsulation Type. */ + uint8_t encap_type; + /* Virtual eXtensible Local Area Network (VXLAN) */ + #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VXLAN \ + UINT32_C(0x1) + /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ + #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_NVGRE \ + UINT32_C(0x2) + /* Generic Routing Encapsulation (GRE) after inside Ethernet payload */ + #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_L2GRE \ + UINT32_C(0x3) + /* IP in IP */ + #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_IPIP \ + UINT32_C(0x4) + /* Generic Network Virtualization Encapsulation (Geneve) */ + #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_GENEVE \ + UINT32_C(0x5) + /* Multi-Protocol Label Switching (MPLS) */ + #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_MPLS \ + UINT32_C(0x6) + /* VLAN */ + #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VLAN \ + UINT32_C(0x7) + /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ + #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_IPGRE \ + UINT32_C(0x8) + /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ + #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VXLAN_V4 \ + UINT32_C(0x9) + /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ + #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_IPGRE_V1 \ + UINT32_C(0xa) + /* Use fixed layer 2 ether type of 0xFFFF */ + #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_L2_ETYPE \ + UINT32_C(0xb) + /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */ + #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VXLAN_GPE_V6 \ + UINT32_C(0xc) + #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_LAST \ + HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VXLAN_GPE_V6 + uint8_t unused_0[3]; + /* This value is encap data used for the given encap type. */ + uint32_t encap_data[20]; +} __rte_packed; -/* hwrm_vnic_alloc_output (size:128b/16B) */ -struct hwrm_vnic_alloc_output { +/* hwrm_cfa_encap_record_alloc_output (size:128b/16B) */ +struct hwrm_cfa_encap_record_alloc_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -18258,26 +30946,26 @@ struct hwrm_vnic_alloc_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* Logical vnic ID */ - uint32_t vnic_id; + /* This value is an opaque id into CFA data structures. */ + uint32_t encap_record_id; uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/****************** - * hwrm_vnic_free * - ******************/ +/****************************** + * hwrm_cfa_encap_record_free * + ******************************/ -/* hwrm_vnic_free_input (size:192b/24B) */ -struct hwrm_vnic_free_input { +/* hwrm_cfa_encap_record_free_input (size:192b/24B) */ +struct hwrm_cfa_encap_record_free_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -18294,7 +30982,8 @@ struct hwrm_vnic_free_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -18305,13 +30994,13 @@ struct hwrm_vnic_free_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* Logical vnic ID */ - uint32_t vnic_id; + /* This value is an opaque id into CFA data structures. */ + uint32_t encap_record_id; uint8_t unused_0[4]; -} __attribute__((packed)); +} __rte_packed; -/* hwrm_vnic_free_output (size:128b/16B) */ -struct hwrm_vnic_free_output { +/* hwrm_cfa_encap_record_free_output (size:128b/16B) */ +struct hwrm_cfa_encap_record_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -18323,21 +31012,21 @@ struct hwrm_vnic_free_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/***************** - * hwrm_vnic_cfg * - *****************/ +/******************************** + * hwrm_cfa_ntuple_filter_alloc * + ********************************/ -/* hwrm_vnic_cfg_input (size:320b/40B) */ -struct hwrm_vnic_cfg_input { +/* hwrm_cfa_ntuple_filter_alloc_input (size:1024b/128B) */ +struct hwrm_cfa_ntuple_filter_alloc_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -18354,7 +31043,8 @@ struct hwrm_vnic_cfg_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -18366,167 +31056,347 @@ struct hwrm_vnic_cfg_input { */ uint64_t resp_addr; uint32_t flags; + /* Setting of this flag indicates the applicability to the loopback path. */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK \ + UINT32_C(0x1) /* - * When this bit is '1', the VNIC is requested to - * be the default VNIC for the function. + * Setting of this flag indicates drop action. If this flag is not set, + * then it should be considered accept action. */ - #define HWRM_VNIC_CFG_INPUT_FLAGS_DEFAULT \ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_DROP \ + UINT32_C(0x2) + /* + * Setting of this flag indicates that a meter is expected to be attached + * to this flow. This hint can be used when choosing the action record + * format required for the flow. + */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_METER \ + UINT32_C(0x4) + /* + * Setting of this flag indicates that the dst_id field contains function ID. + * If this is not set it indicates dest_id is VNIC or VPORT. + */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_DEST_FID \ + UINT32_C(0x8) + /* + * Setting of this flag indicates match on arp reply when ethertype is 0x0806. + * If this is not set it indicates no specific arp opcode matching. + */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_ARP_REPLY \ + UINT32_C(0x10) + /* + * Setting of this flag indicates that the dst_id field contains RFS ring + * table index. If this is not set it indicates dst_id is VNIC or VPORT + * or function ID. Note dest_fid and dest_rfs_ring_idx can’t be set at + * the same time. + */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_DEST_RFS_RING_IDX \ + UINT32_C(0x20) + uint32_t enables; + /* + * This bit must be '1' for the l2_filter_id field to be + * configured. + */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_L2_FILTER_ID \ UINT32_C(0x1) /* - * When this bit is '1', the VNIC is being configured to - * strip VLAN in the RX path. - * If set to '0', then VLAN stripping is disabled on - * this VNIC. + * This bit must be '1' for the ethertype field to be + * configured. */ - #define HWRM_VNIC_CFG_INPUT_FLAGS_VLAN_STRIP_MODE \ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_ETHERTYPE \ UINT32_C(0x2) /* - * When this bit is '1', the VNIC is being configured to - * buffer receive packets in the hardware until the host - * posts new receive buffers. - * If set to '0', then bd_stall is being configured to be - * disabled on this VNIC. + * This bit must be '1' for the tunnel_type field to be + * configured. */ - #define HWRM_VNIC_CFG_INPUT_FLAGS_BD_STALL_MODE \ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \ UINT32_C(0x4) /* - * When this bit is '1', the VNIC is being configured to - * receive both RoCE and non-RoCE traffic. - * If set to '0', then this VNIC is not configured to be - * operating in dual VNIC mode. + * This bit must be '1' for the src_macaddr field to be + * configured. */ - #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_DUAL_VNIC_MODE \ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_MACADDR \ UINT32_C(0x8) /* - * When this flag is set to '1', the VNIC is requested to - * be configured to receive only RoCE traffic. - * If this flag is set to '0', then this flag shall be - * ignored by the HWRM. - * If roce_dual_vnic_mode flag is set to '1' - * or roce_mirroring_capable_vnic_mode flag to 1, - * then the HWRM client shall not set this flag to '1'. + * This bit must be '1' for the ipaddr_type field to be + * configured. */ - #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_ONLY_VNIC_MODE \ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_IPADDR_TYPE \ UINT32_C(0x10) /* - * When a VNIC uses one destination ring group for certain - * application (e.g. Receive Flow Steering) where - * exact match is used to direct packets to a VNIC with one - * destination ring group only, there is no need to configure - * RSS indirection table for that VNIC as only one destination - * ring group is used. - * - * This flag is used to enable a mode where - * RSS is enabled in the VNIC using a RSS context - * for computing RSS hash but the RSS indirection table is - * not configured using hwrm_vnic_rss_cfg. - * - * If this mode is enabled, then the driver should not program - * RSS indirection table for the RSS context that is used for - * computing RSS hash only. + * This bit must be '1' for the src_ipaddr field to be + * configured. + */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_IPADDR \ + UINT32_C(0x20) + /* + * This bit must be '1' for the src_ipaddr_mask field to be + * configured. + */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_IPADDR_MASK \ + UINT32_C(0x40) + /* + * This bit must be '1' for the dst_ipaddr field to be + * configured. + */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_IPADDR \ + UINT32_C(0x80) + /* + * This bit must be '1' for the dst_ipaddr_mask field to be + * configured. + */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_IPADDR_MASK \ + UINT32_C(0x100) + /* + * This bit must be '1' for the ip_protocol field to be + * configured. + */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_IP_PROTOCOL \ + UINT32_C(0x200) + /* + * This bit must be '1' for the src_port field to be + * configured. */ - #define HWRM_VNIC_CFG_INPUT_FLAGS_RSS_DFLT_CR_MODE \ - UINT32_C(0x20) + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_PORT \ + UINT32_C(0x400) /* - * When this bit is '1', the VNIC is being configured to - * receive both RoCE and non-RoCE traffic, but forward only the - * RoCE traffic further. Also, RoCE traffic can be mirrored to - * L2 driver. + * This bit must be '1' for the src_port_mask field to be + * configured. */ - #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_MODE \ - UINT32_C(0x40) - uint32_t enables; + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_PORT_MASK \ + UINT32_C(0x800) /* - * This bit must be '1' for the dflt_ring_grp field to be + * This bit must be '1' for the dst_port field to be * configured. */ - #define HWRM_VNIC_CFG_INPUT_ENABLES_DFLT_RING_GRP \ - UINT32_C(0x1) + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_PORT \ + UINT32_C(0x1000) /* - * This bit must be '1' for the rss_rule field to be + * This bit must be '1' for the dst_port_mask field to be * configured. */ - #define HWRM_VNIC_CFG_INPUT_ENABLES_RSS_RULE \ - UINT32_C(0x2) + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_PORT_MASK \ + UINT32_C(0x2000) /* - * This bit must be '1' for the cos_rule field to be + * This bit must be '1' for the pri_hint field to be * configured. */ - #define HWRM_VNIC_CFG_INPUT_ENABLES_COS_RULE \ - UINT32_C(0x4) + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_PRI_HINT \ + UINT32_C(0x4000) /* - * This bit must be '1' for the lb_rule field to be + * This bit must be '1' for the ntuple_filter_id field to be * configured. */ - #define HWRM_VNIC_CFG_INPUT_ENABLES_LB_RULE \ - UINT32_C(0x8) + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_NTUPLE_FILTER_ID \ + UINT32_C(0x8000) /* - * This bit must be '1' for the mru field to be + * This bit must be '1' for the dst_id field to be * configured. */ - #define HWRM_VNIC_CFG_INPUT_ENABLES_MRU \ - UINT32_C(0x10) + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_ID \ + UINT32_C(0x10000) /* - * This bit must be '1' for the default_rx_ring_id field to be + * This bit must be '1' for the mirror_vnic_id field to be * configured. */ - #define HWRM_VNIC_CFG_INPUT_ENABLES_DEFAULT_RX_RING_ID \ - UINT32_C(0x20) + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \ + UINT32_C(0x20000) /* - * This bit must be '1' for the default_cmpl_ring_id field to be + * This bit must be '1' for the dst_macaddr field to be * configured. */ - #define HWRM_VNIC_CFG_INPUT_ENABLES_DEFAULT_CMPL_RING_ID \ - UINT32_C(0x40) - /* Logical vnic ID */ - uint16_t vnic_id; + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_MACADDR \ + UINT32_C(0x40000) + /* This flag is deprecated. */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_RFS_RING_TBL_IDX \ + UINT32_C(0x80000) /* - * Default Completion ring for the VNIC. This ring will - * be chosen if packet does not match any RSS rules and if - * there is no COS rule. + * This value identifies a set of CFA data structures used for an L2 + * context. */ - uint16_t dflt_ring_grp; + uint64_t l2_filter_id; /* - * RSS ID for RSS rule/table structure. 0xFF... (All Fs) if - * there is no RSS rule. + * This value indicates the source MAC address in + * the Ethernet header. */ - uint16_t rss_rule; + uint8_t src_macaddr[6]; + /* This value indicates the ethertype in the Ethernet header. */ + uint16_t ethertype; /* - * RSS ID for COS rule/table structure. 0xFF... (All Fs) if - * there is no COS rule. + * This value indicates the type of IP address. + * 4 - IPv4 + * 6 - IPv6 + * All others are invalid. */ - uint16_t cos_rule; + uint8_t ip_addr_type; + /* invalid */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_UNKNOWN \ + UINT32_C(0x0) + /* IPv4 */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV4 \ + UINT32_C(0x4) + /* IPv6 */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 \ + UINT32_C(0x6) + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_LAST \ + HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 /* - * RSS ID for load balancing rule/table structure. - * 0xFF... (All Fs) if there is no LB rule. + * The value of protocol filed in IP header. + * Applies to UDP and TCP traffic. + * 6 - TCP + * 17 - UDP */ - uint16_t lb_rule; + uint8_t ip_protocol; + /* invalid */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UNKNOWN \ + UINT32_C(0x0) + /* TCP */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_TCP \ + UINT32_C(0x6) + /* UDP */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP \ + UINT32_C(0x11) + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_LAST \ + HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP /* - * The maximum receive unit of the vnic. - * Each vnic is associated with a function. - * The vnic mru value overwrites the mru setting of the - * associated function. - * The HWRM shall make sure that vnic mru does not exceed - * the mru of the port the function is associated with. + * If set, this value shall represent the + * Logical VNIC ID of the destination VNIC for the RX + * path and network port id of the destination port for + * the TX path. */ - uint16_t mru; + uint16_t dst_id; /* - * Default Rx ring for the VNIC. This ring will - * be chosen if packet does not match any RSS rules. - * The aggregation ring associated with the Rx ring is - * implied based on the Rx ring specified when the - * aggregation ring was allocated. + * Logical VNIC ID of the VNIC where traffic is + * mirrored. + */ + uint16_t mirror_vnic_id; + /* + * This value indicates the tunnel type for this filter. + * If this field is not specified, then the filter shall + * apply to both non-tunneled and tunneled packets. + * If this field conflicts with the tunnel_type specified + * in the l2_filter_id, then the HWRM shall return an + * error for this command. + */ + uint8_t tunnel_type; + /* Non-tunnel */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \ + UINT32_C(0x0) + /* Virtual eXtensible Local Area Network (VXLAN) */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \ + UINT32_C(0x1) + /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \ + UINT32_C(0x2) + /* Generic Routing Encapsulation (GRE) inside Ethernet payload */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \ + UINT32_C(0x3) + /* IP in IP */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \ + UINT32_C(0x4) + /* Generic Network Virtualization Encapsulation (Geneve) */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \ + UINT32_C(0x5) + /* Multi-Protocol Label Switching (MPLS) */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \ + UINT32_C(0x6) + /* Stateless Transport Tunnel (STT) */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \ + UINT32_C(0x7) + /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \ + UINT32_C(0x8) + /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \ + UINT32_C(0x9) + /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \ + UINT32_C(0xa) + /* Use fixed layer 2 ether type of 0xFFFF */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2_ETYPE \ + UINT32_C(0xb) + /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \ + UINT32_C(0xc) + /* Any tunneled traffic */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \ + UINT32_C(0xff) + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_LAST \ + HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL + /* + * This hint is provided to help in placing + * the filter in the filter table. + */ + uint8_t pri_hint; + /* No preference */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_NO_PREFER \ + UINT32_C(0x0) + /* Above the given filter */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_ABOVE \ + UINT32_C(0x1) + /* Below the given filter */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_BELOW \ + UINT32_C(0x2) + /* As high as possible */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_HIGHEST \ + UINT32_C(0x3) + /* As low as possible */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_LOWEST \ + UINT32_C(0x4) + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_LAST \ + HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_LOWEST + /* + * The value of source IP address to be used in filtering. + * For IPv4, first four bytes represent the IP address. + */ + uint32_t src_ipaddr[4]; + /* + * The value of source IP address mask to be used in + * filtering. + * For IPv4, first four bytes represent the IP address mask. + */ + uint32_t src_ipaddr_mask[4]; + /* + * The value of destination IP address to be used in filtering. + * For IPv4, first four bytes represent the IP address. + */ + uint32_t dst_ipaddr[4]; + /* + * The value of destination IP address mask to be used in + * filtering. + * For IPv4, first four bytes represent the IP address mask. + */ + uint32_t dst_ipaddr_mask[4]; + /* + * The value of source port to be used in filtering. + * Applies to UDP and TCP traffic. + */ + uint16_t src_port; + /* + * The value of source port mask to be used in filtering. + * Applies to UDP and TCP traffic. + */ + uint16_t src_port_mask; + /* + * The value of destination port to be used in filtering. + * Applies to UDP and TCP traffic. */ - uint16_t default_rx_ring_id; + uint16_t dst_port; /* - * Default completion ring for the VNIC. This ring will - * be chosen if packet does not match any RSS rules. + * The value of destination port mask to be used in + * filtering. + * Applies to UDP and TCP traffic. */ - uint16_t default_cmpl_ring_id; -} __attribute__((packed)); + uint16_t dst_port_mask; + /* + * This is the ID of the filter that goes along with + * the pri_hint. + */ + uint64_t ntuple_filter_id_hint; +} __rte_packed; -/* hwrm_vnic_cfg_output (size:128b/16B) */ -struct hwrm_vnic_cfg_output { +/* hwrm_cfa_ntuple_filter_alloc_output (size:192b/24B) */ +struct hwrm_cfa_ntuple_filter_alloc_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -18535,24 +31405,84 @@ struct hwrm_vnic_cfg_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - uint8_t unused_0[7]; + /* This value is an opaque id into CFA data structures. */ + uint64_t ntuple_filter_id; + /* + * The flow id value in bit 0-29 is the actual ID of the flow + * associated with this filter and it shall be used to match + * and associate the flow identifier returned in completion + * records. A value of 0xFFFFFFFF in the 32-bit flow_id field + * shall indicate no valid flow id. + */ + uint32_t flow_id; + /* Indicate the flow id value. */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_VALUE_MASK \ + UINT32_C(0x3fffffff) + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_VALUE_SFT 0 + /* Indicate type of the flow. */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE \ + UINT32_C(0x40000000) + /* + * If this bit set to 0, then it indicates that the flow is + * internal flow. + */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_INT \ + (UINT32_C(0x0) << 30) + /* + * If this bit is set to 1, then it indicates that the flow is + * external flow. + */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT \ + (UINT32_C(0x1) << 30) + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_LAST \ + HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT + /* Indicate the flow direction. */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR \ + UINT32_C(0x80000000) + /* If this bit set to 0, then it indicates rx flow. */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_RX \ + (UINT32_C(0x0) << 31) + /* If this bit is set to 1, then it indicates that tx flow. */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_TX \ + (UINT32_C(0x1) << 31) + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_LAST \ + HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_TX + uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/****************** - * hwrm_vnic_qcfg * - ******************/ +/* hwrm_cfa_ntuple_filter_alloc_cmd_err (size:64b/8B) */ +struct hwrm_cfa_ntuple_filter_alloc_cmd_err { + /* + * command specific error codes that goes to + * the cmd_err field in Common HWRM Error Response. + */ + uint8_t code; + /* Unknown error */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_UNKNOWN \ + UINT32_C(0x0) + /* Unable to complete operation due to conflict with Rx Mask VLAN */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_RX_MASK_VLAN_CONFLICT_ERR \ + UINT32_C(0x1) + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_LAST \ + HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_RX_MASK_VLAN_CONFLICT_ERR + uint8_t unused_0[7]; +} __rte_packed; + +/******************************* + * hwrm_cfa_ntuple_filter_free * + *******************************/ -/* hwrm_vnic_qcfg_input (size:256b/32B) */ -struct hwrm_vnic_qcfg_input { +/* hwrm_cfa_ntuple_filter_free_input (size:192b/24B) */ +struct hwrm_cfa_ntuple_filter_free_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -18569,7 +31499,8 @@ struct hwrm_vnic_qcfg_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -18580,21 +31511,12 @@ struct hwrm_vnic_qcfg_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - uint32_t enables; - /* - * This bit must be '1' for the vf_id_valid field to be - * configured. - */ - #define HWRM_VNIC_QCFG_INPUT_ENABLES_VF_ID_VALID UINT32_C(0x1) - /* Logical vnic ID */ - uint32_t vnic_id; - /* ID of Virtual Function whose VNIC resource is being queried. */ - uint16_t vf_id; - uint8_t unused_0[6]; -} __attribute__((packed)); + /* This value is an opaque id into CFA data structures. */ + uint64_t ntuple_filter_id; +} __rte_packed; -/* hwrm_vnic_qcfg_output (size:256b/32B) */ -struct hwrm_vnic_qcfg_output { +/* hwrm_cfa_ntuple_filter_free_output (size:128b/16B) */ +struct hwrm_cfa_ntuple_filter_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -18603,111 +31525,24 @@ struct hwrm_vnic_qcfg_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* Default Completion ring for the VNIC. */ - uint16_t dflt_ring_grp; - /* - * RSS ID for RSS rule/table structure. 0xFF... (All Fs) if - * there is no RSS rule. - */ - uint16_t rss_rule; - /* - * RSS ID for COS rule/table structure. 0xFF... (All Fs) if - * there is no COS rule. - */ - uint16_t cos_rule; - /* - * RSS ID for load balancing rule/table structure. - * 0xFF... (All Fs) if there is no LB rule. - */ - uint16_t lb_rule; - /* The maximum receive unit of the vnic. */ - uint16_t mru; - uint8_t unused_0[2]; - uint32_t flags; - /* - * When this bit is '1', the VNIC is the default VNIC for - * the function. - */ - #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_DEFAULT \ - UINT32_C(0x1) - /* - * When this bit is '1', the VNIC is configured to - * strip VLAN in the RX path. - * If set to '0', then VLAN stripping is disabled on - * this VNIC. - */ - #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_VLAN_STRIP_MODE \ - UINT32_C(0x2) - /* - * When this bit is '1', the VNIC is configured to - * buffer receive packets in the hardware until the host - * posts new receive buffers. - * If set to '0', then bd_stall is disabled on - * this VNIC. - */ - #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_BD_STALL_MODE \ - UINT32_C(0x4) - /* - * When this bit is '1', the VNIC is configured to - * receive both RoCE and non-RoCE traffic. - * If set to '0', then this VNIC is not configured to - * operate in dual VNIC mode. - */ - #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_DUAL_VNIC_MODE \ - UINT32_C(0x8) - /* - * When this flag is set to '1', the VNIC is configured to - * receive only RoCE traffic. - * When this flag is set to '0', the VNIC is not configured - * to receive only RoCE traffic. - * If roce_dual_vnic_mode flag and this flag both are set - * to '1', then it is an invalid configuration of the - * VNIC. The HWRM should not allow that type of - * mis-configuration by HWRM clients. - */ - #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_ONLY_VNIC_MODE \ - UINT32_C(0x10) - /* - * When a VNIC uses one destination ring group for certain - * application (e.g. Receive Flow Steering) where - * exact match is used to direct packets to a VNIC with one - * destination ring group only, there is no need to configure - * RSS indirection table for that VNIC as only one destination - * ring group is used. - * - * When this bit is set to '1', then the VNIC is enabled in a - * mode where RSS is enabled in the VNIC using a RSS context - * for computing RSS hash but the RSS indirection table is - * not configured. - */ - #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_RSS_DFLT_CR_MODE \ - UINT32_C(0x20) - /* - * When this bit is '1', the VNIC is configured to - * receive both RoCE and non-RoCE traffic, but forward only - * RoCE traffic further. Also RoCE traffic can be mirrored to - * L2 driver. - */ - #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_MODE \ - UINT32_C(0x40) - uint8_t unused_1[7]; + uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/******************* - * hwrm_vnic_qcaps * - *******************/ +/****************************** + * hwrm_cfa_ntuple_filter_cfg * + ******************************/ -/* hwrm_vnic_qcaps_input (size:192b/24B) */ -struct hwrm_vnic_qcaps_input { +/* hwrm_cfa_ntuple_filter_cfg_input (size:384b/48B) */ +struct hwrm_cfa_ntuple_filter_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -18724,7 +31559,8 @@ struct hwrm_vnic_qcaps_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -18736,104 +31572,98 @@ struct hwrm_vnic_qcaps_input { */ uint64_t resp_addr; uint32_t enables; - uint8_t unused_0[4]; -} __attribute__((packed)); - -/* hwrm_vnic_qcaps_output (size:192b/24B) */ -struct hwrm_vnic_qcaps_output { - /* The specific error status for the command. */ - uint16_t error_code; - /* The HWRM command request type. */ - uint16_t req_type; - /* The sequence ID from the original command. */ - uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; - /* The maximum receive unit that is settable on a vnic. */ - uint16_t mru; - uint8_t unused_0[2]; - uint32_t flags; - /* Unused. */ - #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_UNUSED \ + /* + * This bit must be '1' for the new_dst_id field to be + * configured. + */ + #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_DST_ID \ UINT32_C(0x1) /* - * When this bit is '1', the capability of stripping VLAN in - * the RX path is supported on VNIC(s). - * If set to '0', then VLAN stripping capability is - * not supported on VNIC(s). + * This bit must be '1' for the new_mirror_vnic_id field to be + * configured. */ - #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_VLAN_STRIP_CAP \ + #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID \ UINT32_C(0x2) /* - * When this bit is '1', the capability to buffer receive - * packets in the hardware until the host posts new receive buffers - * is supported on VNIC(s). - * If set to '0', then bd_stall capability is not supported - * on VNIC(s). + * This bit must be '1' for the new_meter_instance_id field to be + * configured. */ - #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_BD_STALL_CAP \ + #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_METER_INSTANCE_ID \ UINT32_C(0x4) + uint32_t flags; /* - * When this bit is '1', the capability to - * receive both RoCE and non-RoCE traffic on VNIC(s) is - * supported. - * If set to '0', then the capability to receive - * both RoCE and non-RoCE traffic on VNIC(s) is - * not supported. + * Setting this bit to 1 indicates that dest_id field contains FID. + * Setting this to 0 indicates that dest_id field contains VNIC or VPORT. */ - #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_ROCE_DUAL_VNIC_CAP \ - UINT32_C(0x8) + #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_FLAGS_DEST_FID \ + UINT32_C(0x1) /* - * When this bit is set to '1', the capability to configure - * a VNIC to receive only RoCE traffic is supported. - * When this flag is set to '0', the VNIC capability to - * configure to receive only RoCE traffic is not supported. + * Setting of this flag indicates that the new_dst_id field contains + * RFS ring table index. If this is not set it indicates new_dst_id is + * VNIC or VPORT or function ID. Note dest_fid and dest_rfs_ring_idx + * can’t be set at the same time. */ - #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_ROCE_ONLY_VNIC_CAP \ - UINT32_C(0x10) + #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_FLAGS_DEST_RFS_RING_IDX \ + UINT32_C(0x2) + /* This value is an opaque id into CFA data structures. */ + uint64_t ntuple_filter_id; /* - * When this bit is set to '1', then the capability to enable - * a VNIC in a mode where RSS context without configuring - * RSS indirection table is supported (for RSS hash computation). - * When this bit is set to '0', then a VNIC can not be configured - * with a mode to enable RSS context without configuring RSS - * indirection table. + * If set, this value shall represent the new + * Logical VNIC ID of the destination VNIC for the RX + * path and new network port id of the destination port for + * the TX path. */ - #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_RSS_DFLT_CR_CAP \ - UINT32_C(0x20) + uint32_t new_dst_id; /* - * When this bit is '1', the capability to - * mirror the the RoCE traffic is supported. - * If set to '0', then the capability to mirror the - * RoCE traffic is not supported. + * New Logical VNIC ID of the VNIC where traffic is + * mirrored. + */ + uint32_t new_mirror_vnic_id; + /* + * New meter to attach to the flow. Specifying the + * invalid instance ID is used to remove any existing + * meter from the flow. */ - #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_CAP \ - UINT32_C(0x40) + uint16_t new_meter_instance_id; /* - * When this bit is '1', the outermost RSS hashing capability - * is supported. If set to '0', then the outermost RSS hashing - * capability is not supported. + * A value of 0xfff is considered invalid and implies the + * instance is not configured. */ - #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_OUTERMOST_RSS_CAP \ - UINT32_C(0x80) - uint8_t unused_1[7]; + #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_NEW_METER_INSTANCE_ID_INVALID \ + UINT32_C(0xffff) + #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_NEW_METER_INSTANCE_ID_LAST \ + HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_NEW_METER_INSTANCE_ID_INVALID + uint8_t unused_1[6]; +} __rte_packed; + +/* hwrm_cfa_ntuple_filter_cfg_output (size:128b/16B) */ +struct hwrm_cfa_ntuple_filter_cfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/********************* - * hwrm_vnic_tpa_cfg * - *********************/ +/************************** + * hwrm_cfa_em_flow_alloc * + **************************/ -/* hwrm_vnic_tpa_cfg_input (size:320b/40B) */ -struct hwrm_vnic_tpa_cfg_input { +/* hwrm_cfa_em_flow_alloc_input (size:896b/112B) */ +struct hwrm_cfa_em_flow_alloc_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -18850,7 +31680,8 @@ struct hwrm_vnic_tpa_cfg_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -18863,143 +31694,314 @@ struct hwrm_vnic_tpa_cfg_input { uint64_t resp_addr; uint32_t flags; /* - * When this bit is '1', the VNIC shall be configured to - * perform transparent packet aggregation (TPA) of - * non-tunneled TCP packets. + * Enumeration denoting the RX, TX type of the resource. + * This enumeration is used for resources that are similar for both + * TX and RX paths of the chip. */ - #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_TPA \ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH UINT32_C(0x1) + /* tx path */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_TX UINT32_C(0x0) + /* rx path */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_RX UINT32_C(0x1) + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_LAST \ + HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_RX + /* + * Setting of this flag indicates enabling of a byte counter for a given + * flow. + */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_BYTE_CTR UINT32_C(0x2) + /* + * Setting of this flag indicates enabling of a packet counter for a given + * flow. + */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PKT_CTR UINT32_C(0x4) + /* Setting of this flag indicates de-capsulation action for the given flow. */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_DECAP UINT32_C(0x8) + /* Setting of this flag indicates encapsulation action for the given flow. */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_ENCAP UINT32_C(0x10) + /* + * Setting of this flag indicates drop action. If this flag is not set, + * then it should be considered accept action. + */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_DROP UINT32_C(0x20) + /* + * Setting of this flag indicates that a meter is expected to be attached + * to this flow. This hint can be used when choosing the action record + * format required for the flow. + */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_METER UINT32_C(0x40) + uint32_t enables; + /* + * This bit must be '1' for the l2_filter_id field to be + * configured. + */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_L2_FILTER_ID \ UINT32_C(0x1) /* - * When this bit is '1', the VNIC shall be configured to - * perform transparent packet aggregation (TPA) of - * tunneled TCP packets. + * This bit must be '1' for the tunnel_type field to be + * configured. */ - #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_ENCAP_TPA \ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \ UINT32_C(0x2) /* - * When this bit is '1', the VNIC shall be configured to - * perform transparent packet aggregation (TPA) according - * to Windows Receive Segment Coalescing (RSC) rules. + * This bit must be '1' for the tunnel_id field to be + * configured. */ - #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_RSC_WND_UPDATE \ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_TUNNEL_ID \ UINT32_C(0x4) /* - * When this bit is '1', the VNIC shall be configured to - * perform transparent packet aggregation (TPA) according - * to Linux Generic Receive Offload (GRO) rules. + * This bit must be '1' for the src_macaddr field to be + * configured. */ - #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO \ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_MACADDR \ UINT32_C(0x8) /* - * When this bit is '1', the VNIC shall be configured to - * perform transparent packet aggregation (TPA) for TCP - * packets with IP ECN set to non-zero. + * This bit must be '1' for the dst_macaddr field to be + * configured. */ - #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_WITH_ECN \ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_MACADDR \ UINT32_C(0x10) /* - * When this bit is '1', the VNIC shall be configured to - * perform transparent packet aggregation (TPA) for - * GRE tunneled TCP packets only if all packets have the - * same GRE sequence. + * This bit must be '1' for the ovlan_vid field to be + * configured. + */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_OVLAN_VID \ + UINT32_C(0x20) + /* + * This bit must be '1' for the ivlan_vid field to be + * configured. + */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IVLAN_VID \ + UINT32_C(0x40) + /* + * This bit must be '1' for the ethertype field to be + * configured. + */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_ETHERTYPE \ + UINT32_C(0x80) + /* + * This bit must be '1' for the src_ipaddr field to be + * configured. + */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_IPADDR \ + UINT32_C(0x100) + /* + * This bit must be '1' for the dst_ipaddr field to be + * configured. + */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_IPADDR \ + UINT32_C(0x200) + /* + * This bit must be '1' for the ipaddr_type field to be + * configured. + */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IPADDR_TYPE \ + UINT32_C(0x400) + /* + * This bit must be '1' for the ip_protocol field to be + * configured. + */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IP_PROTOCOL \ + UINT32_C(0x800) + /* + * This bit must be '1' for the src_port field to be + * configured. + */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_PORT \ + UINT32_C(0x1000) + /* + * This bit must be '1' for the dst_port field to be + * configured. + */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_PORT \ + UINT32_C(0x2000) + /* + * This bit must be '1' for the dst_id field to be + * configured. + */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_ID \ + UINT32_C(0x4000) + /* + * This bit must be '1' for the mirror_vnic_id field to be + * configured. + */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \ + UINT32_C(0x8000) + /* + * This bit must be '1' for the encap_record_id field to be + * configured. + */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_ENCAP_RECORD_ID \ + UINT32_C(0x10000) + /* + * This bit must be '1' for the meter_instance_id field to be + * configured. + */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_METER_INSTANCE_ID \ + UINT32_C(0x20000) + /* + * This value identifies a set of CFA data structures used for an L2 + * context. + */ + uint64_t l2_filter_id; + /* Tunnel Type. */ + uint8_t tunnel_type; + /* Non-tunnel */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \ + UINT32_C(0x0) + /* Virtual eXtensible Local Area Network (VXLAN) */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \ + UINT32_C(0x1) + /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \ + UINT32_C(0x2) + /* Generic Routing Encapsulation (GRE) inside Ethernet payload */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \ + UINT32_C(0x3) + /* IP in IP */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPIP \ + UINT32_C(0x4) + /* Generic Network Virtualization Encapsulation (Geneve) */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \ + UINT32_C(0x5) + /* Multi-Protocol Label Switching (MPLS) */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_MPLS \ + UINT32_C(0x6) + /* Stateless Transport Tunnel (STT) */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_STT \ + UINT32_C(0x7) + /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \ + UINT32_C(0x8) + /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \ + UINT32_C(0x9) + /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \ + UINT32_C(0xa) + /* Use fixed layer 2 ether type of 0xFFFF */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_L2_ETYPE \ + UINT32_C(0xb) + /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \ + UINT32_C(0xc) + /* Any tunneled traffic */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \ + UINT32_C(0xff) + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_LAST \ + HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL + uint8_t unused_0[3]; + /* + * Tunnel identifier. + * Virtual Network Identifier (VNI). Only valid with + * tunnel_types VXLAN, NVGRE, and Geneve. + * Only lower 24-bits of VNI field are used + * in setting up the filter. + */ + uint32_t tunnel_id; + /* + * This value indicates the source MAC address in + * the Ethernet header. + */ + uint8_t src_macaddr[6]; + /* The meter instance to attach to the flow. */ + uint16_t meter_instance_id; + /* + * A value of 0xfff is considered invalid and implies the + * instance is not configured. + */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_METER_INSTANCE_ID_INVALID \ + UINT32_C(0xffff) + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_METER_INSTANCE_ID_LAST \ + HWRM_CFA_EM_FLOW_ALLOC_INPUT_METER_INSTANCE_ID_INVALID + /* + * This value indicates the destination MAC address in + * the Ethernet header. */ - #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_WITH_SAME_GRE_SEQ \ - UINT32_C(0x20) + uint8_t dst_macaddr[6]; /* - * When this bit is '1' and the GRO mode is enabled, - * the VNIC shall be configured to - * perform transparent packet aggregation (TPA) for - * TCP/IPv4 packets with consecutively increasing IPIDs. - * In other words, the last packet that is being - * aggregated to an already existing aggregation context - * shall have IPID 1 more than the IPID of the last packet - * that was aggregated in that aggregation context. + * This value indicates the VLAN ID of the outer VLAN tag + * in the Ethernet header. */ - #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO_IPID_CHECK \ - UINT32_C(0x40) + uint16_t ovlan_vid; /* - * When this bit is '1' and the GRO mode is enabled, - * the VNIC shall be configured to - * perform transparent packet aggregation (TPA) for - * TCP packets with the same TTL (IPv4) or Hop limit (IPv6) - * value. + * This value indicates the VLAN ID of the inner VLAN tag + * in the Ethernet header. */ - #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO_TTL_CHECK \ - UINT32_C(0x80) - uint32_t enables; + uint16_t ivlan_vid; + /* This value indicates the ethertype in the Ethernet header. */ + uint16_t ethertype; /* - * This bit must be '1' for the max_agg_segs field to be - * configured. + * This value indicates the type of IP address. + * 4 - IPv4 + * 6 - IPv6 + * All others are invalid. */ - #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_SEGS UINT32_C(0x1) + uint8_t ip_addr_type; + /* invalid */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_UNKNOWN UINT32_C(0x0) + /* IPv4 */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_IPV4 UINT32_C(0x4) + /* IPv6 */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 UINT32_C(0x6) + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_LAST \ + HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 /* - * This bit must be '1' for the max_aggs field to be - * configured. + * The value of protocol filed in IP header. + * Applies to UDP and TCP traffic. + * 6 - TCP + * 17 - UDP */ - #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGGS UINT32_C(0x2) + uint8_t ip_protocol; + /* invalid */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UNKNOWN UINT32_C(0x0) + /* TCP */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_TCP UINT32_C(0x6) + /* UDP */ + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UDP UINT32_C(0x11) + #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_LAST \ + HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UDP + uint8_t unused_1[2]; /* - * This bit must be '1' for the max_agg_timer field to be - * configured. + * The value of source IP address to be used in filtering. + * For IPv4, first four bytes represent the IP address. */ - #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_TIMER UINT32_C(0x4) + uint32_t src_ipaddr[4]; /* - * This bit must be '1' for the min_agg_len field to be - * configured. + * big_endian = True + * The value of destination IP address to be used in filtering. + * For IPv4, first four bytes represent the IP address. */ - #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MIN_AGG_LEN UINT32_C(0x8) - /* Logical vnic ID */ - uint16_t vnic_id; + uint32_t dst_ipaddr[4]; /* - * This is the maximum number of TCP segments that can - * be aggregated (unit is Log2). Max value is 31. + * The value of source port to be used in filtering. + * Applies to UDP and TCP traffic. */ - uint16_t max_agg_segs; - /* 1 segment */ - #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_1 UINT32_C(0x0) - /* 2 segments */ - #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_2 UINT32_C(0x1) - /* 4 segments */ - #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_4 UINT32_C(0x2) - /* 8 segments */ - #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_8 UINT32_C(0x3) - /* Any segment size larger than this is not valid */ - #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_MAX UINT32_C(0x1f) - #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_LAST \ - HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_MAX + uint16_t src_port; /* - * This is the maximum number of aggregations this VNIC is - * allowed (unit is Log2). Max value is 7 + * The value of destination port to be used in filtering. + * Applies to UDP and TCP traffic. */ - uint16_t max_aggs; - /* 1 aggregation */ - #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_1 UINT32_C(0x0) - /* 2 aggregations */ - #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_2 UINT32_C(0x1) - /* 4 aggregations */ - #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_4 UINT32_C(0x2) - /* 8 aggregations */ - #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_8 UINT32_C(0x3) - /* 16 aggregations */ - #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_16 UINT32_C(0x4) - /* Any aggregation size larger than this is not valid */ - #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_MAX UINT32_C(0x7) - #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_LAST \ - HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_MAX - uint8_t unused_0[2]; + uint16_t dst_port; /* - * This is the maximum amount of time allowed for - * an aggregation context to complete after it was initiated. + * If set, this value shall represent the + * Logical VNIC ID of the destination VNIC for the RX + * path and network port id of the destination port for + * the TX path. */ - uint32_t max_agg_timer; + uint16_t dst_id; /* - * This is the minimum amount of payload length required to - * start an aggregation context. + * Logical VNIC ID of the VNIC where traffic is + * mirrored. */ - uint32_t min_agg_len; -} __attribute__((packed)); + uint16_t mirror_vnic_id; + /* Logical ID of the encapsulation record. */ + uint32_t encap_record_id; + uint8_t unused_2[4]; +} __rte_packed; -/* hwrm_vnic_tpa_cfg_output (size:128b/16B) */ -struct hwrm_vnic_tpa_cfg_output { +/* hwrm_cfa_em_flow_alloc_output (size:192b/24B) */ +struct hwrm_cfa_em_flow_alloc_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -19008,24 +32010,66 @@ struct hwrm_vnic_tpa_cfg_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - uint8_t unused_0[7]; + /* This value is an opaque id into CFA data structures. */ + uint64_t em_filter_id; + /* + * The flow id value in bit 0-29 is the actual ID of the flow + * associated with this filter and it shall be used to match + * and associate the flow identifier returned in completion + * records. A value of 0xFFFFFFFF in the 32-bit flow_id field + * shall indicate no valid flow id. + */ + uint32_t flow_id; + /* Indicate the flow id value. */ + #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_VALUE_MASK \ + UINT32_C(0x3fffffff) + #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_VALUE_SFT 0 + /* Indicate type of the flow. */ + #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE \ + UINT32_C(0x40000000) + /* + * If this bit set to 0, then it indicates that the flow is + * internal flow. + */ + #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE_INT \ + (UINT32_C(0x0) << 30) + /* + * If this bit is set to 1, then it indicates that the flow is + * external flow. + */ + #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT \ + (UINT32_C(0x1) << 30) + #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE_LAST \ + HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT + /* Indicate the flow direction. */ + #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR \ + UINT32_C(0x80000000) + /* If this bit set to 0, then it indicates rx flow. */ + #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR_RX \ + (UINT32_C(0x0) << 31) + /* If this bit is set to 1, then it indicates that tx flow. */ + #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR_TX \ + (UINT32_C(0x1) << 31) + #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR_LAST \ + HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR_TX + uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/********************* - * hwrm_vnic_rss_cfg * - *********************/ +/************************* + * hwrm_cfa_em_flow_free * + *************************/ -/* hwrm_vnic_rss_cfg_input (size:384b/48B) */ -struct hwrm_vnic_rss_cfg_input { +/* hwrm_cfa_em_flow_free_input (size:192b/24B) */ +struct hwrm_cfa_em_flow_free_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -19042,7 +32086,8 @@ struct hwrm_vnic_rss_cfg_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -19052,104 +32097,13 @@ struct hwrm_vnic_rss_cfg_input { * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ - uint64_t resp_addr; - uint32_t hash_type; - /* - * When this bit is '1', the RSS hash shall be computed - * over source and destination IPv4 addresses of IPv4 - * packets. - */ - #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV4 UINT32_C(0x1) - /* - * When this bit is '1', the RSS hash shall be computed - * over source/destination IPv4 addresses and - * source/destination ports of TCP/IPv4 packets. - */ - #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV4 UINT32_C(0x2) - /* - * When this bit is '1', the RSS hash shall be computed - * over source/destination IPv4 addresses and - * source/destination ports of UDP/IPv4 packets. - */ - #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV4 UINT32_C(0x4) - /* - * When this bit is '1', the RSS hash shall be computed - * over source and destination IPv4 addresses of IPv6 - * packets. - */ - #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV6 UINT32_C(0x8) - /* - * When this bit is '1', the RSS hash shall be computed - * over source/destination IPv6 addresses and - * source/destination ports of TCP/IPv6 packets. - */ - #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV6 UINT32_C(0x10) - /* - * When this bit is '1', the RSS hash shall be computed - * over source/destination IPv6 addresses and - * source/destination ports of UDP/IPv6 packets. - */ - #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV6 UINT32_C(0x20) - /* VNIC ID of VNIC associated with RSS table being configured. */ - uint16_t vnic_id; - /* - * Specifies which VNIC ring table pair to configure. - * Valid values range from 0 to 7. - */ - uint8_t ring_table_pair_index; - /* Flags to specify different RSS hash modes. */ - uint8_t hash_mode_flags; - /* - * When this bit is '1', it indicates using current RSS - * hash mode setting configured in the device. - */ - #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_DEFAULT \ - UINT32_C(0x1) - /* - * When this bit is '1', it indicates requesting support of - * RSS hashing over innermost 4 tuples {l3.src, l3.dest, - * l4.src, l4.dest} for tunnel packets. For none-tunnel - * packets, the RSS hash is computed over the normal - * src/dest l3 and src/dest l4 headers. - */ - #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_INNERMOST_4 \ - UINT32_C(0x2) - /* - * When this bit is '1', it indicates requesting support of - * RSS hashing over innermost 2 tuples {l3.src, l3.dest} for - * tunnel packets. For none-tunnel packets, the RSS hash is - * computed over the normal src/dest l3 headers. - */ - #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_INNERMOST_2 \ - UINT32_C(0x4) - /* - * When this bit is '1', it indicates requesting support of - * RSS hashing over outermost 4 tuples {t_l3.src, t_l3.dest, - * t_l4.src, t_l4.dest} for tunnel packets. For none-tunnel - * packets, the RSS hash is computed over the normal - * src/dest l3 and src/dest l4 headers. - */ - #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_OUTERMOST_4 \ - UINT32_C(0x8) - /* - * When this bit is '1', it indicates requesting support of - * RSS hashing over outermost 2 tuples {t_l3.src, t_l3.dest} for - * tunnel packets. For none-tunnel packets, the RSS hash is - * computed over the normal src/dest l3 headers. - */ - #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_OUTERMOST_2 \ - UINT32_C(0x10) - /* This is the address for rss ring group table */ - uint64_t ring_grp_tbl_addr; - /* This is the address for rss hash key table */ - uint64_t hash_key_tbl_addr; - /* Index to the rss indirection table. */ - uint16_t rss_ctx_idx; - uint8_t unused_1[6]; -} __attribute__((packed)); + uint64_t resp_addr; + /* This value is an opaque id into CFA data structures. */ + uint64_t em_filter_id; +} __rte_packed; -/* hwrm_vnic_rss_cfg_output (size:128b/16B) */ -struct hwrm_vnic_rss_cfg_output { +/* hwrm_cfa_em_flow_free_output (size:128b/16B) */ +struct hwrm_cfa_em_flow_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -19161,21 +32115,21 @@ struct hwrm_vnic_rss_cfg_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/********************** - * hwrm_vnic_rss_qcfg * - **********************/ +/************************ + * hwrm_cfa_meter_qcaps * + ************************/ -/* hwrm_vnic_rss_qcfg_input (size:192b/24B) */ -struct hwrm_vnic_rss_qcfg_input { +/* hwrm_cfa_meter_qcaps_input (size:128b/16B) */ +struct hwrm_cfa_meter_qcaps_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -19192,7 +32146,8 @@ struct hwrm_vnic_rss_qcfg_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -19203,13 +32158,10 @@ struct hwrm_vnic_rss_qcfg_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* Index to the rss indirection table. */ - uint16_t rss_ctx_idx; - uint8_t unused_0[6]; -} __attribute__((packed)); +} __rte_packed; -/* hwrm_vnic_rss_qcfg_output (size:512b/64B) */ -struct hwrm_vnic_rss_qcfg_output { +/* hwrm_cfa_meter_qcaps_output (size:320b/40B) */ +struct hwrm_cfa_meter_qcaps_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -19218,106 +32170,79 @@ struct hwrm_vnic_rss_qcfg_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - uint32_t hash_type; - /* - * When this bit is '1', the RSS hash shall be computed - * over source and destination IPv4 addresses of IPv4 - * packets. - */ - #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_IPV4 UINT32_C(0x1) - /* - * When this bit is '1', the RSS hash shall be computed - * over source/destination IPv4 addresses and - * source/destination ports of TCP/IPv4 packets. - */ - #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_TCP_IPV4 UINT32_C(0x2) + uint32_t flags; /* - * When this bit is '1', the RSS hash shall be computed - * over source/destination IPv4 addresses and - * source/destination ports of UDP/IPv4 packets. + * Enumeration denoting the clock at which the Meter is running with. + * This enumeration is used for resources that are similar for both + * TX and RX paths of the chip. */ - #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_UDP_IPV4 UINT32_C(0x4) + #define HWRM_CFA_METER_QCAPS_OUTPUT_FLAGS_CLOCK_MASK UINT32_C(0xf) + #define HWRM_CFA_METER_QCAPS_OUTPUT_FLAGS_CLOCK_SFT 0 + /* 375 MHz */ + #define HWRM_CFA_METER_QCAPS_OUTPUT_FLAGS_CLOCK_375MHZ UINT32_C(0x0) + /* 625 MHz */ + #define HWRM_CFA_METER_QCAPS_OUTPUT_FLAGS_CLOCK_625MHZ UINT32_C(0x1) + #define HWRM_CFA_METER_QCAPS_OUTPUT_FLAGS_CLOCK_LAST \ + HWRM_CFA_METER_QCAPS_OUTPUT_FLAGS_CLOCK_625MHZ + uint8_t unused_0[4]; /* - * When this bit is '1', the RSS hash shall be computed - * over source and destination IPv4 addresses of IPv6 - * packets. + * The minimum guaranteed number of tx meter profiles supported + * for this function. */ - #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_IPV6 UINT32_C(0x8) + uint16_t min_tx_profile; /* - * When this bit is '1', the RSS hash shall be computed - * over source/destination IPv6 addresses and - * source/destination ports of TCP/IPv6 packets. + * The maximum non-guaranteed number of tx meter profiles supported + * for this function. */ - #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_TCP_IPV6 UINT32_C(0x10) + uint16_t max_tx_profile; /* - * When this bit is '1', the RSS hash shall be computed - * over source/destination IPv6 addresses and - * source/destination ports of UDP/IPv6 packets. + * The minimum guaranteed number of rx meter profiles supported + * for this function. */ - #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_UDP_IPV6 UINT32_C(0x20) - uint8_t unused_0[4]; - /* This is the value of rss hash key */ - uint32_t hash_key[10]; - /* Flags to specify different RSS hash modes. */ - uint8_t hash_mode_flags; + uint16_t min_rx_profile; /* - * When this bit is '1', it indicates using current RSS - * hash mode setting configured in the device. + * The maximum non-guaranteed number of rx meter profiles supported + * for this function. */ - #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_DEFAULT \ - UINT32_C(0x1) + uint16_t max_rx_profile; /* - * When this bit is '1', it indicates requesting support of - * RSS hashing over innermost 4 tuples {l3.src, l3.dest, - * l4.src, l4.dest} for tunnel packets. For none-tunnel - * packets, the RSS hash is computed over the normal - * src/dest l3 and src/dest l4 headers. + * The minimum guaranteed number of tx meter instances supported + * for this function. */ - #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_INNERMOST_4 \ - UINT32_C(0x2) + uint16_t min_tx_instance; /* - * When this bit is '1', it indicates requesting support of - * RSS hashing over innermost 2 tuples {l3.src, l3.dest} for - * tunnel packets. For none-tunnel packets, the RSS hash is - * computed over the normal src/dest l3 headers. + * The maximum non-guaranteed number of tx meter instances supported + * for this function. */ - #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_INNERMOST_2 \ - UINT32_C(0x4) + uint16_t max_tx_instance; /* - * When this bit is '1', it indicates requesting support of - * RSS hashing over outermost 4 tuples {t_l3.src, t_l3.dest, - * t_l4.src, t_l4.dest} for tunnel packets. For none-tunnel - * packets, the RSS hash is computed over the normal - * src/dest l3 and src/dest l4 headers. + * The minimum guaranteed number of rx meter instances supported + * for this function. */ - #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_OUTERMOST_4 \ - UINT32_C(0x8) + uint16_t min_rx_instance; /* - * When this bit is '1', it indicates requesting support of - * RSS hashing over outermost 2 tuples {t_l3.src, t_l3.dest} for - * tunnel packets. For none-tunnel packets, the RSS hash is - * computed over the normal src/dest l3 headers. + * The maximum non-guaranteed number of rx meter instances supported + * for this function. */ - #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_OUTERMOST_2 \ - UINT32_C(0x10) - uint8_t unused_1[6]; + uint16_t max_rx_instance; + uint8_t unused_1[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/************************** - * hwrm_vnic_plcmodes_cfg * - **************************/ +/******************************** + * hwrm_cfa_meter_profile_alloc * + ********************************/ -/* hwrm_vnic_plcmodes_cfg_input (size:320b/40B) */ -struct hwrm_vnic_plcmodes_cfg_input { +/* hwrm_cfa_meter_profile_alloc_input (size:320b/40B) */ +struct hwrm_cfa_meter_profile_alloc_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -19334,7 +32259,8 @@ struct hwrm_vnic_plcmodes_cfg_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -19345,116 +32271,315 @@ struct hwrm_vnic_plcmodes_cfg_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - uint32_t flags; + uint8_t flags; /* - * When this bit is '1', the VNIC shall be configured to - * use regular placement algorithm. - * By default, the regular placement algorithm shall be - * enabled on the VNIC. + * Enumeration denoting the RX, TX type of the resource. + * This enumeration is used for resources that are similar for both + * TX and RX paths of the chip. */ - #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_REGULAR_PLACEMENT \ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_FLAGS_PATH UINT32_C(0x1) + /* tx path */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_FLAGS_PATH_TX \ + UINT32_C(0x0) + /* rx path */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_FLAGS_PATH_RX \ UINT32_C(0x1) - /* - * When this bit is '1', the VNIC shall be configured - * use the jumbo placement algorithm. - */ - #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_JUMBO_PLACEMENT \ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_FLAGS_PATH_LAST \ + HWRM_CFA_METER_PROFILE_ALLOC_INPUT_FLAGS_PATH_RX + /* The meter algorithm type. */ + uint8_t meter_type; + /* RFC 2697 (srTCM) */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_METER_TYPE_RFC2697 \ + UINT32_C(0x0) + /* RFC 2698 (trTCM) */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_METER_TYPE_RFC2698 \ + UINT32_C(0x1) + /* RFC 4115 (trTCM) */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_METER_TYPE_RFC4115 \ UINT32_C(0x2) + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_METER_TYPE_LAST \ + HWRM_CFA_METER_PROFILE_ALLOC_INPUT_METER_TYPE_RFC4115 /* - * When this bit is '1', the VNIC shall be configured - * to enable Header-Data split for IPv4 packets according - * to the following rules: - * # If the packet is identified as TCP/IPv4, then the - * packet is split at the beginning of the TCP payload. - * # If the packet is identified as UDP/IPv4, then the - * packet is split at the beginning of UDP payload. - * # If the packet is identified as non-TCP and non-UDP - * IPv4 packet, then the packet is split at the beginning - * of the upper layer protocol header carried in the IPv4 - * packet. + * This field is reserved for the future use. + * It shall be set to 0. */ - #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_IPV4 \ - UINT32_C(0x4) + uint16_t reserved1; /* - * When this bit is '1', the VNIC shall be configured - * to enable Header-Data split for IPv6 packets according - * to the following rules: - * # If the packet is identified as TCP/IPv6, then the - * packet is split at the beginning of the TCP payload. - * # If the packet is identified as UDP/IPv6, then the - * packet is split at the beginning of UDP payload. - * # If the packet is identified as non-TCP and non-UDP - * IPv6 packet, then the packet is split at the beginning - * of the upper layer protocol header carried in the IPv6 - * packet. + * This field is reserved for the future use. + * It shall be set to 0. */ - #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_IPV6 \ - UINT32_C(0x8) + uint32_t reserved2; + /* A meter rate specified in bytes-per-second. */ + uint32_t commit_rate; + /* The bandwidth value. */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_SCALE_LAST \ + HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Raw value */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_RAW \ + (UINT32_C(0x7) << 29) + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_LAST \ + HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_RAW + /* A meter burst size specified in bytes. */ + uint32_t commit_burst; + /* The bandwidth value. */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_SCALE_LAST \ + HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid value */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_LAST \ + HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_INVALID + /* A meter rate specified in bytes-per-second. */ + uint32_t excess_peak_rate; + /* The bandwidth value. */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_SCALE_LAST \ + HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Raw unit */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_RAW \ + (UINT32_C(0x7) << 29) + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_LAST \ + HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_RAW + /* A meter burst size specified in bytes. */ + uint32_t excess_peak_burst; + /* The bandwidth value. */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_SCALE_LAST \ + HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_LAST \ + HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_INVALID +} __rte_packed; + +/* hwrm_cfa_meter_profile_alloc_output (size:128b/16B) */ +struct hwrm_cfa_meter_profile_alloc_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* This value identifies a meter profile in CFA. */ + uint16_t meter_profile_id; /* - * When this bit is '1', the VNIC shall be configured - * to enable Header-Data split for FCoE packets at the - * beginning of FC payload. + * A value of 0xfff is considered invalid and implies the + * profile is not configured. */ - #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_FCOE \ - UINT32_C(0x10) + #define HWRM_CFA_METER_PROFILE_ALLOC_OUTPUT_METER_PROFILE_ID_INVALID \ + UINT32_C(0xffff) + #define HWRM_CFA_METER_PROFILE_ALLOC_OUTPUT_METER_PROFILE_ID_LAST \ + HWRM_CFA_METER_PROFILE_ALLOC_OUTPUT_METER_PROFILE_ID_INVALID + uint8_t unused_0[5]; /* - * When this bit is '1', the VNIC shall be configured - * to enable Header-Data split for RoCE packets at the - * beginning of RoCE payload (after BTH/GRH headers). + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_ROCE \ - UINT32_C(0x20) - uint32_t enables; + uint8_t valid; +} __rte_packed; + +/******************************* + * hwrm_cfa_meter_profile_free * + *******************************/ + + +/* hwrm_cfa_meter_profile_free_input (size:192b/24B) */ +struct hwrm_cfa_meter_profile_free_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * This bit must be '1' for the jumbo_thresh_valid field to be - * configured. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - #define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_JUMBO_THRESH_VALID \ - UINT32_C(0x1) + uint16_t cmpl_ring; /* - * This bit must be '1' for the hds_offset_valid field to be - * configured. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - #define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_HDS_OFFSET_VALID \ - UINT32_C(0x2) + uint16_t seq_id; /* - * This bit must be '1' for the hds_threshold_valid field to be - * configured. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - #define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_HDS_THRESHOLD_VALID \ - UINT32_C(0x4) - /* Logical vnic ID */ - uint32_t vnic_id; + uint16_t target_id; /* - * When jumbo placement algorithm is enabled, this value - * is used to determine the threshold for jumbo placement. - * Packets with length larger than this value will be - * placed according to the jumbo placement algorithm. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - uint16_t jumbo_thresh; + uint64_t resp_addr; + uint8_t flags; /* - * This value is used to determine the offset into - * packet buffer where the split data (payload) will be - * placed according to one of of HDS placement algorithm. - * - * The lengths of packet buffers provided for split data - * shall be larger than this value. + * Enumeration denoting the RX, TX type of the resource. + * This enumeration is used for resources that are similar for both + * TX and RX paths of the chip. */ - uint16_t hds_offset; + #define HWRM_CFA_METER_PROFILE_FREE_INPUT_FLAGS_PATH UINT32_C(0x1) + /* tx path */ + #define HWRM_CFA_METER_PROFILE_FREE_INPUT_FLAGS_PATH_TX \ + UINT32_C(0x0) + /* rx path */ + #define HWRM_CFA_METER_PROFILE_FREE_INPUT_FLAGS_PATH_RX \ + UINT32_C(0x1) + #define HWRM_CFA_METER_PROFILE_FREE_INPUT_FLAGS_PATH_LAST \ + HWRM_CFA_METER_PROFILE_FREE_INPUT_FLAGS_PATH_RX + uint8_t unused_0; + /* This value identifies a meter profile in CFA. */ + uint16_t meter_profile_id; /* - * When one of the HDS placement algorithm is enabled, this - * value is used to determine the threshold for HDS - * placement. - * Packets with length larger than this value will be - * placed according to the HDS placement algorithm. - * This value shall be in multiple of 4 bytes. + * A value of 0xfff is considered invalid and implies the + * profile is not configured. */ - uint16_t hds_threshold; - uint8_t unused_0[6]; -} __attribute__((packed)); + #define HWRM_CFA_METER_PROFILE_FREE_INPUT_METER_PROFILE_ID_INVALID \ + UINT32_C(0xffff) + #define HWRM_CFA_METER_PROFILE_FREE_INPUT_METER_PROFILE_ID_LAST \ + HWRM_CFA_METER_PROFILE_FREE_INPUT_METER_PROFILE_ID_INVALID + uint8_t unused_1[4]; +} __rte_packed; -/* hwrm_vnic_plcmodes_cfg_output (size:128b/16B) */ -struct hwrm_vnic_plcmodes_cfg_output { +/* hwrm_cfa_meter_profile_free_output (size:128b/16B) */ +struct hwrm_cfa_meter_profile_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -19466,21 +32591,21 @@ struct hwrm_vnic_plcmodes_cfg_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/*************************** - * hwrm_vnic_plcmodes_qcfg * - ***************************/ +/****************************** + * hwrm_cfa_meter_profile_cfg * + ******************************/ -/* hwrm_vnic_plcmodes_qcfg_input (size:192b/24B) */ -struct hwrm_vnic_plcmodes_qcfg_input { +/* hwrm_cfa_meter_profile_cfg_input (size:320b/40B) */ +struct hwrm_cfa_meter_profile_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -19497,7 +32622,8 @@ struct hwrm_vnic_plcmodes_qcfg_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -19508,13 +32634,223 @@ struct hwrm_vnic_plcmodes_qcfg_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* Logical vnic ID */ - uint32_t vnic_id; - uint8_t unused_0[4]; -} __attribute__((packed)); + uint8_t flags; + /* + * Enumeration denoting the RX, TX type of the resource. + * This enumeration is used for resources that are similar for both + * TX and RX paths of the chip. + */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_FLAGS_PATH UINT32_C(0x1) + /* tx path */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0) + /* rx path */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1) + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_FLAGS_PATH_LAST \ + HWRM_CFA_METER_PROFILE_CFG_INPUT_FLAGS_PATH_RX + /* The meter algorithm type. */ + uint8_t meter_type; + /* RFC 2697 (srTCM) */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_TYPE_RFC2697 \ + UINT32_C(0x0) + /* RFC 2698 (trTCM) */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_TYPE_RFC2698 \ + UINT32_C(0x1) + /* RFC 4115 (trTCM) */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_TYPE_RFC4115 \ + UINT32_C(0x2) + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_TYPE_LAST \ + HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_TYPE_RFC4115 + /* This value identifies a meter profile in CFA. */ + uint16_t meter_profile_id; + /* + * A value of 0xfff is considered invalid and implies the + * profile is not configured. + */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_PROFILE_ID_INVALID \ + UINT32_C(0xffff) + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_PROFILE_ID_LAST \ + HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_PROFILE_ID_INVALID + /* + * This field is reserved for the future use. + * It shall be set to 0. + */ + uint32_t reserved; + /* A meter rate specified in bytes-per-second. */ + uint32_t commit_rate; + /* The bandwidth value. */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_SCALE_LAST \ + HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Raw value */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_RAW \ + (UINT32_C(0x7) << 29) + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_LAST \ + HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_RAW + /* A meter burst size specified in bytes. */ + uint32_t commit_burst; + /* The bandwidth value. */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_SCALE_LAST \ + HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid value */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_LAST \ + HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_INVALID + /* A meter rate specified in bytes-per-second. */ + uint32_t excess_peak_rate; + /* The bandwidth value. */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_SCALE_LAST \ + HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Raw unit */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_RAW \ + (UINT32_C(0x7) << 29) + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_LAST \ + HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_RAW + /* A meter burst size specified in bytes. */ + uint32_t excess_peak_burst; + /* The bandwidth value. */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_SFT \ + 0 + /* The granularity of the value (bits or bytes). */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_SCALE_LAST \ + HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_SCALE_BYTES + /* bw_value_unit is 3 b */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in Mb or MB (base 10). */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_MEGA \ + (UINT32_C(0x0) << 29) + /* Value is in Kb or KB (base 10). */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_KILO \ + (UINT32_C(0x2) << 29) + /* Value is in bits or bytes. */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_BASE \ + (UINT32_C(0x4) << 29) + /* Value is in Gb or GB (base 10). */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_GIGA \ + (UINT32_C(0x6) << 29) + /* Value is in 1/100th of a percentage of total bandwidth. */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + /* Invalid unit */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_INVALID \ + (UINT32_C(0x7) << 29) + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_LAST \ + HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_INVALID +} __rte_packed; -/* hwrm_vnic_plcmodes_qcfg_output (size:192b/24B) */ -struct hwrm_vnic_plcmodes_qcfg_output { +/* hwrm_cfa_meter_profile_cfg_output (size:128b/16B) */ +struct hwrm_cfa_meter_profile_cfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -19523,92 +32859,120 @@ struct hwrm_vnic_plcmodes_qcfg_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - uint32_t flags; - /* - * When this bit is '1', the VNIC is configured to - * use regular placement algorithm. - */ - #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_REGULAR_PLACEMENT \ - UINT32_C(0x1) - /* - * When this bit is '1', the VNIC is configured to - * use the jumbo placement algorithm. - */ - #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_JUMBO_PLACEMENT \ - UINT32_C(0x2) + uint8_t unused_0[7]; /* - * When this bit is '1', the VNIC is configured - * to enable Header-Data split for IPv4 packets. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_IPV4 \ - UINT32_C(0x4) + uint8_t valid; +} __rte_packed; + +/********************************* + * hwrm_cfa_meter_instance_alloc * + *********************************/ + + +/* hwrm_cfa_meter_instance_alloc_input (size:192b/24B) */ +struct hwrm_cfa_meter_instance_alloc_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * When this bit is '1', the VNIC is configured - * to enable Header-Data split for IPv6 packets. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_IPV6 \ - UINT32_C(0x8) + uint16_t cmpl_ring; /* - * When this bit is '1', the VNIC is configured - * to enable Header-Data split for FCoE packets. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_FCOE \ - UINT32_C(0x10) + uint16_t seq_id; /* - * When this bit is '1', the VNIC is configured - * to enable Header-Data split for RoCE packets. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_ROCE \ - UINT32_C(0x20) + uint16_t target_id; /* - * When this bit is '1', the VNIC is configured - * to be the default VNIC of the requesting function. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_DFLT_VNIC \ - UINT32_C(0x40) + uint64_t resp_addr; + uint8_t flags; /* - * When jumbo placement algorithm is enabled, this value - * is used to determine the threshold for jumbo placement. - * Packets with length larger than this value will be - * placed according to the jumbo placement algorithm. + * Enumeration denoting the RX, TX type of the resource. + * This enumeration is used for resources that are similar for both + * TX and RX paths of the chip. */ - uint16_t jumbo_thresh; + #define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_FLAGS_PATH \ + UINT32_C(0x1) + /* tx path */ + #define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_FLAGS_PATH_TX \ + UINT32_C(0x0) + /* rx path */ + #define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_FLAGS_PATH_RX \ + UINT32_C(0x1) + #define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_FLAGS_PATH_LAST \ + HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_FLAGS_PATH_RX + uint8_t unused_0; + /* This value identifies a meter profile in CFA. */ + uint16_t meter_profile_id; /* - * This value is used to determine the offset into - * packet buffer where the split data (payload) will be - * placed according to one of of HDS placement algorithm. - * - * The lengths of packet buffers provided for split data - * shall be larger than this value. + * A value of 0xffff is considered invalid and implies the + * profile is not configured. */ - uint16_t hds_offset; + #define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_METER_PROFILE_ID_INVALID \ + UINT32_C(0xffff) + #define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_METER_PROFILE_ID_LAST \ + HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_METER_PROFILE_ID_INVALID + uint8_t unused_1[4]; +} __rte_packed; + +/* hwrm_cfa_meter_instance_alloc_output (size:128b/16B) */ +struct hwrm_cfa_meter_instance_alloc_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* This value identifies a meter instance in CFA. */ + uint16_t meter_instance_id; /* - * When one of the HDS placement algorithm is enabled, this - * value is used to determine the threshold for HDS - * placement. - * Packets with length larger than this value will be - * placed according to the HDS placement algorithm. - * This value shall be in multiple of 4 bytes. + * A value of 0xffff is considered invalid and implies the + * instance is not configured. */ - uint16_t hds_threshold; + #define HWRM_CFA_METER_INSTANCE_ALLOC_OUTPUT_METER_INSTANCE_ID_INVALID \ + UINT32_C(0xffff) + #define HWRM_CFA_METER_INSTANCE_ALLOC_OUTPUT_METER_INSTANCE_ID_LAST \ + HWRM_CFA_METER_INSTANCE_ALLOC_OUTPUT_METER_INSTANCE_ID_INVALID uint8_t unused_0[5]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/********************************** - * hwrm_vnic_rss_cos_lb_ctx_alloc * - **********************************/ +/******************************* + * hwrm_cfa_meter_instance_cfg * + *******************************/ -/* hwrm_vnic_rss_cos_lb_ctx_alloc_input (size:128b/16B) */ -struct hwrm_vnic_rss_cos_lb_ctx_alloc_input { +/* hwrm_cfa_meter_instance_cfg_input (size:192b/24B) */ +struct hwrm_cfa_meter_instance_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -19625,7 +32989,8 @@ struct hwrm_vnic_rss_cos_lb_ctx_alloc_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -19636,10 +33001,45 @@ struct hwrm_vnic_rss_cos_lb_ctx_alloc_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; -} __attribute__((packed)); + uint8_t flags; + /* + * Enumeration denoting the RX, TX type of the resource. + * This enumeration is used for resources that are similar for both + * TX and RX paths of the chip. + */ + #define HWRM_CFA_METER_INSTANCE_CFG_INPUT_FLAGS_PATH UINT32_C(0x1) + /* tx path */ + #define HWRM_CFA_METER_INSTANCE_CFG_INPUT_FLAGS_PATH_TX \ + UINT32_C(0x0) + /* rx path */ + #define HWRM_CFA_METER_INSTANCE_CFG_INPUT_FLAGS_PATH_RX \ + UINT32_C(0x1) + #define HWRM_CFA_METER_INSTANCE_CFG_INPUT_FLAGS_PATH_LAST \ + HWRM_CFA_METER_INSTANCE_CFG_INPUT_FLAGS_PATH_RX + uint8_t unused_0; + /* + * This value identifies a new meter profile to be associated with + * the meter instance specified in this command. + */ + uint16_t meter_profile_id; + /* + * A value of 0xffff is considered invalid and implies the + * profile is not configured. + */ + #define HWRM_CFA_METER_INSTANCE_CFG_INPUT_METER_PROFILE_ID_INVALID \ + UINT32_C(0xffff) + #define HWRM_CFA_METER_INSTANCE_CFG_INPUT_METER_PROFILE_ID_LAST \ + HWRM_CFA_METER_INSTANCE_CFG_INPUT_METER_PROFILE_ID_INVALID + /* + * This value identifies the ID of a meter instance that needs to be updated with + * a new meter profile specified in this command. + */ + uint16_t meter_instance_id; + uint8_t unused_1[2]; +} __rte_packed; -/* hwrm_vnic_rss_cos_lb_ctx_alloc_output (size:128b/16B) */ -struct hwrm_vnic_rss_cos_lb_ctx_alloc_output { +/* hwrm_cfa_meter_instance_cfg_output (size:128b/16B) */ +struct hwrm_cfa_meter_instance_cfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -19648,26 +33048,24 @@ struct hwrm_vnic_rss_cos_lb_ctx_alloc_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* rss_cos_lb_ctx_id is 16 b */ - uint16_t rss_cos_lb_ctx_id; - uint8_t unused_0[5]; + uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/********************************* - * hwrm_vnic_rss_cos_lb_ctx_free * - *********************************/ +/******************************** + * hwrm_cfa_meter_instance_free * + ********************************/ -/* hwrm_vnic_rss_cos_lb_ctx_free_input (size:192b/24B) */ -struct hwrm_vnic_rss_cos_lb_ctx_free_input { +/* hwrm_cfa_meter_instance_free_input (size:192b/24B) */ +struct hwrm_cfa_meter_instance_free_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -19684,7 +33082,8 @@ struct hwrm_vnic_rss_cos_lb_ctx_free_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -19695,13 +33094,37 @@ struct hwrm_vnic_rss_cos_lb_ctx_free_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* rss_cos_lb_ctx_id is 16 b */ - uint16_t rss_cos_lb_ctx_id; - uint8_t unused_0[6]; -} __attribute__((packed)); + uint8_t flags; + /* + * Enumeration denoting the RX, TX type of the resource. + * This enumeration is used for resources that are similar for both + * TX and RX paths of the chip. + */ + #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH UINT32_C(0x1) + /* tx path */ + #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_TX \ + UINT32_C(0x0) + /* rx path */ + #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_RX \ + UINT32_C(0x1) + #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_LAST \ + HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_RX + uint8_t unused_0; + /* This value identifies a meter instance in CFA. */ + uint16_t meter_instance_id; + /* + * A value of 0xfff is considered invalid and implies the + * instance is not configured. + */ + #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_METER_INSTANCE_ID_INVALID \ + UINT32_C(0xffff) + #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_METER_INSTANCE_ID_LAST \ + HWRM_CFA_METER_INSTANCE_FREE_INPUT_METER_INSTANCE_ID_INVALID + uint8_t unused_1[4]; +} __rte_packed; -/* hwrm_vnic_rss_cos_lb_ctx_free_output (size:128b/16B) */ -struct hwrm_vnic_rss_cos_lb_ctx_free_output { +/* hwrm_cfa_meter_instance_free_output (size:128b/16B) */ +struct hwrm_cfa_meter_instance_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -19713,21 +33136,21 @@ struct hwrm_vnic_rss_cos_lb_ctx_free_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/******************* - * hwrm_ring_alloc * - *******************/ +/******************************* + * hwrm_cfa_decap_filter_alloc * + *******************************/ -/* hwrm_ring_alloc_input (size:704b/88B) */ -struct hwrm_ring_alloc_input { +/* hwrm_cfa_decap_filter_alloc_input (size:832b/104B) */ +struct hwrm_cfa_decap_filter_alloc_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -19744,7 +33167,8 @@ struct hwrm_ring_alloc_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -19755,286 +33179,275 @@ struct hwrm_ring_alloc_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; + uint32_t flags; + /* ovs_tunnel is 1 b */ + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_FLAGS_OVS_TUNNEL \ + UINT32_C(0x1) uint32_t enables; /* - * This bit must be '1' for the ring_arb_cfg field to be + * This bit must be '1' for the tunnel_type field to be * configured. */ - #define HWRM_RING_ALLOC_INPUT_ENABLES_RING_ARB_CFG \ + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \ + UINT32_C(0x1) + /* + * This bit must be '1' for the tunnel_id field to be + * configured. + */ + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_ID \ UINT32_C(0x2) /* - * This bit must be '1' for the stat_ctx_id_valid field to be + * This bit must be '1' for the src_macaddr field to be * configured. */ - #define HWRM_RING_ALLOC_INPUT_ENABLES_STAT_CTX_ID_VALID \ + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_SRC_MACADDR \ + UINT32_C(0x4) + /* + * This bit must be '1' for the dst_macaddr field to be + * configured. + */ + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_DST_MACADDR \ UINT32_C(0x8) /* - * This bit must be '1' for the max_bw_valid field to be + * This bit must be '1' for the ovlan_vid field to be * configured. */ - #define HWRM_RING_ALLOC_INPUT_ENABLES_MAX_BW_VALID \ + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_OVLAN_VID \ + UINT32_C(0x10) + /* + * This bit must be '1' for the ivlan_vid field to be + * configured. + */ + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_IVLAN_VID \ UINT32_C(0x20) /* - * This bit must be '1' for the rx_ring_id field to be + * This bit must be '1' for the t_ovlan_vid field to be * configured. */ - #define HWRM_RING_ALLOC_INPUT_ENABLES_RX_RING_ID_VALID \ + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_T_OVLAN_VID \ UINT32_C(0x40) /* - * This bit must be '1' for the nq_ring_id field to be + * This bit must be '1' for the t_ivlan_vid field to be * configured. */ - #define HWRM_RING_ALLOC_INPUT_ENABLES_NQ_RING_ID_VALID \ + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_T_IVLAN_VID \ UINT32_C(0x80) /* - * This bit must be '1' for the rx_buf_size field to be + * This bit must be '1' for the ethertype field to be * configured. */ - #define HWRM_RING_ALLOC_INPUT_ENABLES_RX_BUF_SIZE_VALID \ + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_ETHERTYPE \ UINT32_C(0x100) - /* Ring Type. */ - uint8_t ring_type; - /* L2 Completion Ring (CR) */ - #define HWRM_RING_ALLOC_INPUT_RING_TYPE_L2_CMPL UINT32_C(0x0) - /* TX Ring (TR) */ - #define HWRM_RING_ALLOC_INPUT_RING_TYPE_TX UINT32_C(0x1) - /* RX Ring (RR) */ - #define HWRM_RING_ALLOC_INPUT_RING_TYPE_RX UINT32_C(0x2) - /* RoCE Notification Completion Ring (ROCE_CR) */ - #define HWRM_RING_ALLOC_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3) - /* RX Aggregation Ring */ - #define HWRM_RING_ALLOC_INPUT_RING_TYPE_RX_AGG UINT32_C(0x4) - /* Notification Queue */ - #define HWRM_RING_ALLOC_INPUT_RING_TYPE_NQ UINT32_C(0x5) - #define HWRM_RING_ALLOC_INPUT_RING_TYPE_LAST \ - HWRM_RING_ALLOC_INPUT_RING_TYPE_NQ - uint8_t unused_0; - /* Ring allocation flags. */ - uint16_t flags; /* - * For Rx rings, the incoming packet data can be placed at either - * a 0B or 2B offset from the start of the Rx packet buffer. When - * '1', the received packet will be padded with 2B of zeros at the - * front of the packet. Note that this flag is only used for - * Rx rings and is ignored for all other rings included Rx - * Aggregation rings. + * This bit must be '1' for the src_ipaddr field to be + * configured. */ - #define HWRM_RING_ALLOC_INPUT_FLAGS_RX_SOP_PAD UINT32_C(0x1) + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_SRC_IPADDR \ + UINT32_C(0x200) /* - * This value is a pointer to the page table for the - * Ring. + * This bit must be '1' for the dst_ipaddr field to be + * configured. */ - uint64_t page_tbl_addr; - /* First Byte Offset of the first entry in the first page. */ - uint32_t fbo; + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_DST_IPADDR \ + UINT32_C(0x400) /* - * Actual page size in 2^page_size. The supported range is increments - * in powers of 2 from 16 bytes to 1GB. - * - 4 = 16 B - * Page size is 16 B. - * - 12 = 4 KB - * Page size is 4 KB. - * - 13 = 8 KB - * Page size is 8 KB. - * - 16 = 64 KB - * Page size is 64 KB. - * - 21 = 2 MB - * Page size is 2 MB. - * - 22 = 4 MB - * Page size is 4 MB. - * - 30 = 1 GB - * Page size is 1 GB. + * This bit must be '1' for the ipaddr_type field to be + * configured. */ - uint8_t page_size; + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_IPADDR_TYPE \ + UINT32_C(0x800) /* - * This value indicates the depth of page table. - * For this version of the specification, value other than 0 or - * 1 shall be considered as an invalid value. - * When the page_tbl_depth = 0, then it is treated as a - * special case with the following. - * 1. FBO and page size fields are not valid. - * 2. page_tbl_addr is the physical address of the first - * element of the ring. + * This bit must be '1' for the ip_protocol field to be + * configured. + */ + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_IP_PROTOCOL \ + UINT32_C(0x1000) + /* + * This bit must be '1' for the src_port field to be + * configured. */ - uint8_t page_tbl_depth; - uint8_t unused_1[2]; + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_SRC_PORT \ + UINT32_C(0x2000) /* - * Number of 16B units in the ring. Minimum size for - * a ring is 16 16B entries. + * This bit must be '1' for the dst_port field to be + * configured. */ - uint32_t length; + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_DST_PORT \ + UINT32_C(0x4000) /* - * Logical ring number for the ring to be allocated. - * This value determines the position in the doorbell - * area where the update to the ring will be made. - * - * For completion rings, this value is also the MSI-X - * vector number for the function the completion ring is - * associated with. + * This bit must be '1' for the dst_id field to be + * configured. */ - uint16_t logical_id; + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_DST_ID \ + UINT32_C(0x8000) /* - * This field is used only when ring_type is a TX ring. - * This value indicates what completion ring the TX ring - * is associated with. + * This bit must be '1' for the mirror_vnic_id field to be + * configured. */ - uint16_t cmpl_ring_id; + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \ + UINT32_C(0x10000) /* - * This field is used only when ring_type is a TX ring. - * This value indicates what CoS queue the TX ring - * is associated with. + * Tunnel identifier. + * Virtual Network Identifier (VNI). Only valid with + * tunnel_types VXLAN, NVGRE, and Geneve. + * Only lower 24-bits of VNI field are used + * in setting up the filter. */ - uint16_t queue_id; + uint32_t tunnel_id; + /* Tunnel Type. */ + uint8_t tunnel_type; + /* Non-tunnel */ + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \ + UINT32_C(0x0) + /* Virtual eXtensible Local Area Network (VXLAN) */ + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \ + UINT32_C(0x1) + /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \ + UINT32_C(0x2) + /* Generic Routing Encapsulation (GRE) inside Ethernet payload */ + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \ + UINT32_C(0x3) + /* IP in IP */ + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \ + UINT32_C(0x4) + /* Generic Network Virtualization Encapsulation (Geneve) */ + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \ + UINT32_C(0x5) + /* Multi-Protocol Label Switching (MPLS) */ + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \ + UINT32_C(0x6) + /* Stateless Transport Tunnel (STT) */ + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \ + UINT32_C(0x7) + /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \ + UINT32_C(0x8) + /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \ + UINT32_C(0x9) + /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \ + UINT32_C(0xa) + /* Use fixed layer 2 ether type of 0xFFFF */ + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2_ETYPE \ + UINT32_C(0xb) + /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */ + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \ + UINT32_C(0xc) + /* Any tunneled traffic */ + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \ + UINT32_C(0xff) + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_LAST \ + HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL + uint8_t unused_0; + uint16_t unused_1; /* - * When allocating a Rx ring or Rx aggregation ring, this field - * specifies the size of the buffer descriptors posted to the ring. + * This value indicates the source MAC address in + * the Ethernet header. */ - uint16_t rx_buf_size; + uint8_t src_macaddr[6]; + uint8_t unused_2[2]; /* - * When allocating an Rx aggregation ring, this field - * specifies the associated Rx ring ID. + * This value indicates the destination MAC address in + * the Ethernet header. */ - uint16_t rx_ring_id; + uint8_t dst_macaddr[6]; /* - * When allocating a completion ring, this field - * specifies the associated NQ ring ID. + * This value indicates the VLAN ID of the outer VLAN tag + * in the Ethernet header. */ - uint16_t nq_ring_id; + uint16_t ovlan_vid; /* - * This field is used only when ring_type is a TX ring. - * This field is used to configure arbitration related - * parameters for a TX ring. + * This value indicates the VLAN ID of the inner VLAN tag + * in the Ethernet header. */ - uint16_t ring_arb_cfg; - /* Arbitration policy used for the ring. */ - #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_MASK \ - UINT32_C(0xf) - #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_SFT 0 + uint16_t ivlan_vid; /* - * Use strict priority for the TX ring. - * Priority value is specified in arb_policy_param + * This value indicates the VLAN ID of the outer VLAN tag + * in the tunnel Ethernet header. */ - #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_SP \ - UINT32_C(0x1) + uint16_t t_ovlan_vid; /* - * Use weighted fair queue arbitration for the TX ring. - * Weight is specified in arb_policy_param + * This value indicates the VLAN ID of the inner VLAN tag + * in the tunnel Ethernet header. */ - #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_WFQ \ - UINT32_C(0x2) - #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_LAST \ - HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_WFQ - /* Reserved field. */ - #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_RSVD_MASK \ - UINT32_C(0xf0) - #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_RSVD_SFT 4 + uint16_t t_ivlan_vid; + /* This value indicates the ethertype in the Ethernet header. */ + uint16_t ethertype; /* - * Arbitration policy specific parameter. - * # For strict priority arbitration policy, this field - * represents a priority value. If set to 0, then the priority - * is not specified and the HWRM is allowed to select - * any priority for this TX ring. - * # For weighted fair queue arbitration policy, this field - * represents a weight value. If set to 0, then the weight - * is not specified and the HWRM is allowed to select - * any weight for this TX ring. + * This value indicates the type of IP address. + * 4 - IPv4 + * 6 - IPv6 + * All others are invalid. */ - #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_PARAM_MASK \ - UINT32_C(0xff00) - #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_PARAM_SFT 8 - uint16_t unused_3; + uint8_t ip_addr_type; + /* invalid */ + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_UNKNOWN \ + UINT32_C(0x0) + /* IPv4 */ + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV4 \ + UINT32_C(0x4) + /* IPv6 */ + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 \ + UINT32_C(0x6) + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_LAST \ + HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 /* - * This field is reserved for the future use. - * It shall be set to 0. + * The value of protocol filed in IP header. + * Applies to UDP and TCP traffic. + * 6 - TCP + * 17 - UDP */ - uint32_t reserved3; + uint8_t ip_protocol; + /* invalid */ + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_UNKNOWN \ + UINT32_C(0x0) + /* TCP */ + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_TCP \ + UINT32_C(0x6) + /* UDP */ + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP \ + UINT32_C(0x11) + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_LAST \ + HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP + uint16_t unused_3; + uint32_t unused_4; /* - * This field is used only when ring_type is a TX ring. - * This input indicates what statistics context this ring - * should be associated with. + * The value of source IP address to be used in filtering. + * For IPv4, first four bytes represent the IP address. */ - uint32_t stat_ctx_id; + uint32_t src_ipaddr[4]; /* - * This field is reserved for the future use. - * It shall be set to 0. + * The value of destination IP address to be used in filtering. + * For IPv4, first four bytes represent the IP address. */ - uint32_t reserved4; + uint32_t dst_ipaddr[4]; /* - * This field is used only when ring_type is a TX ring - * to specify maximum BW allocated to the TX ring. - * The HWRM will translate this value into byte counter and - * time interval used for this ring inside the device. + * The value of source port to be used in filtering. + * Applies to UDP and TCP traffic. */ - uint32_t max_bw; - /* The bandwidth value. */ - #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_MASK \ - UINT32_C(0xfffffff) - #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_SFT 0 - /* The granularity of the value (bits or bytes). */ - #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE \ - UINT32_C(0x10000000) - /* Value is in bits. */ - #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BITS \ - (UINT32_C(0x0) << 28) - /* Value is in bytes. */ - #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BYTES \ - (UINT32_C(0x1) << 28) - #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_LAST \ - HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BYTES - /* bw_value_unit is 3 b */ - #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_MASK \ - UINT32_C(0xe0000000) - #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_SFT 29 - /* Value is in Mb or MB (base 10). */ - #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_MEGA \ - (UINT32_C(0x0) << 29) - /* Value is in Kb or KB (base 10). */ - #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_KILO \ - (UINT32_C(0x2) << 29) - /* Value is in bits or bytes. */ - #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_BASE \ - (UINT32_C(0x4) << 29) - /* Value is in Gb or GB (base 10). */ - #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_GIGA \ - (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ - #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ - (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID \ - (UINT32_C(0x7) << 29) - #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_LAST \ - HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID + uint16_t src_port; /* - * This field is used only when ring_type is a Completion ring. - * This value indicates what interrupt mode should be used - * on this completion ring. - * Note: In the legacy interrupt mode, no more than 16 - * completion rings are allowed. + * The value of destination port to be used in filtering. + * Applies to UDP and TCP traffic. */ - uint8_t int_mode; - /* Legacy INTA */ - #define HWRM_RING_ALLOC_INPUT_INT_MODE_LEGACY UINT32_C(0x0) - /* Reserved */ - #define HWRM_RING_ALLOC_INPUT_INT_MODE_RSVD UINT32_C(0x1) - /* MSI-X */ - #define HWRM_RING_ALLOC_INPUT_INT_MODE_MSIX UINT32_C(0x2) - /* No Interrupt - Polled mode */ - #define HWRM_RING_ALLOC_INPUT_INT_MODE_POLL UINT32_C(0x3) - #define HWRM_RING_ALLOC_INPUT_INT_MODE_LAST \ - HWRM_RING_ALLOC_INPUT_INT_MODE_POLL - uint8_t unused_4[3]; + uint16_t dst_port; /* - * The cq_handle is specified when allocating a completion ring. For - * devices that support NQs, this cq_handle will be included in the - * NQE to specify which CQ should be read to retrieve the completion - * record. + * If set, this value shall represent the + * Logical VNIC ID of the destination VNIC for the RX + * path. */ - uint64_t cq_handle; -} __attribute__((packed)); + uint16_t dst_id; + /* + * If set, this value shall represent the L2 context that matches the L2 + * information of the decap filter. + */ + uint16_t l2_ctxt_ref_id; +} __rte_packed; -/* hwrm_ring_alloc_output (size:128b/16B) */ -struct hwrm_ring_alloc_output { +/* hwrm_cfa_decap_filter_alloc_output (size:128b/16B) */ +struct hwrm_cfa_decap_filter_alloc_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -20043,31 +33456,26 @@ struct hwrm_ring_alloc_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* - * Physical number of ring allocated. - * This value shall be unique for a ring type. - */ - uint16_t ring_id; - /* Logical number of ring allocated. */ - uint16_t logical_ring_id; + /* This value is an opaque id into CFA data structures. */ + uint32_t decap_filter_id; uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/****************** - * hwrm_ring_free * - ******************/ +/****************************** + * hwrm_cfa_decap_filter_free * + ******************************/ -/* hwrm_ring_free_input (size:192b/24B) */ -struct hwrm_ring_free_input { +/* hwrm_cfa_decap_filter_free_input (size:192b/24B) */ +struct hwrm_cfa_decap_filter_free_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -20084,7 +33492,8 @@ struct hwrm_ring_free_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -20095,30 +33504,13 @@ struct hwrm_ring_free_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* Ring Type. */ - uint8_t ring_type; - /* L2 Completion Ring (CR) */ - #define HWRM_RING_FREE_INPUT_RING_TYPE_L2_CMPL UINT32_C(0x0) - /* TX Ring (TR) */ - #define HWRM_RING_FREE_INPUT_RING_TYPE_TX UINT32_C(0x1) - /* RX Ring (RR) */ - #define HWRM_RING_FREE_INPUT_RING_TYPE_RX UINT32_C(0x2) - /* RoCE Notification Completion Ring (ROCE_CR) */ - #define HWRM_RING_FREE_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3) - /* RX Aggregation Ring */ - #define HWRM_RING_FREE_INPUT_RING_TYPE_RX_AGG UINT32_C(0x4) - /* Notification Queue */ - #define HWRM_RING_FREE_INPUT_RING_TYPE_NQ UINT32_C(0x5) - #define HWRM_RING_FREE_INPUT_RING_TYPE_LAST \ - HWRM_RING_FREE_INPUT_RING_TYPE_NQ - uint8_t unused_0; - /* Physical number of ring allocated. */ - uint16_t ring_id; - uint8_t unused_1[4]; -} __attribute__((packed)); + /* This value is an opaque id into CFA data structures. */ + uint32_t decap_filter_id; + uint8_t unused_0[4]; +} __rte_packed; -/* hwrm_ring_free_output (size:128b/16B) */ -struct hwrm_ring_free_output { +/* hwrm_cfa_decap_filter_free_output (size:128b/16B) */ +struct hwrm_cfa_decap_filter_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -20130,21 +33522,21 @@ struct hwrm_ring_free_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/******************* - * hwrm_ring_reset * - *******************/ +/*********************** + * hwrm_cfa_flow_alloc * + ***********************/ -/* hwrm_ring_reset_input (size:192b/24B) */ -struct hwrm_ring_reset_input { +/* hwrm_cfa_flow_alloc_input (size:1024b/128B) */ +struct hwrm_cfa_flow_alloc_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -20161,7 +33553,8 @@ struct hwrm_ring_reset_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -20172,201 +33565,355 @@ struct hwrm_ring_reset_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* Ring Type. */ - uint8_t ring_type; - /* L2 Completion Ring (CR) */ - #define HWRM_RING_RESET_INPUT_RING_TYPE_L2_CMPL UINT32_C(0x0) - /* TX Ring (TR) */ - #define HWRM_RING_RESET_INPUT_RING_TYPE_TX UINT32_C(0x1) - /* RX Ring (RR) */ - #define HWRM_RING_RESET_INPUT_RING_TYPE_RX UINT32_C(0x2) - /* RoCE Notification Completion Ring (ROCE_CR) */ - #define HWRM_RING_RESET_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3) - #define HWRM_RING_RESET_INPUT_RING_TYPE_LAST \ - HWRM_RING_RESET_INPUT_RING_TYPE_ROCE_CMPL - uint8_t unused_0; - /* Physical number of the ring. */ - uint16_t ring_id; - uint8_t unused_1[4]; -} __attribute__((packed)); - -/* hwrm_ring_reset_output (size:128b/16B) */ -struct hwrm_ring_reset_output { - /* The specific error status for the command. */ - uint16_t error_code; - /* The HWRM command request type. */ - uint16_t req_type; - /* The sequence ID from the original command. */ - uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; - uint8_t unused_0[7]; + uint16_t flags; + /* tunnel is 1 b */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_TUNNEL \ + UINT32_C(0x1) + /* num_vlan is 2 b */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_MASK \ + UINT32_C(0x6) + #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_SFT 1 + /* no tags */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_NONE \ + (UINT32_C(0x0) << 1) + /* 1 tag */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_ONE \ + (UINT32_C(0x1) << 1) + /* 2 tags */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_TWO \ + (UINT32_C(0x2) << 1) + #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_LAST \ + HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_TWO + /* Enumeration denoting the Flow Type. */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_MASK \ + UINT32_C(0x38) + #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_SFT 3 + /* L2 flow */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_L2 \ + (UINT32_C(0x0) << 3) + /* IPV4 flow */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_IPV4 \ + (UINT32_C(0x1) << 3) + /* IPV6 flow */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_IPV6 \ + (UINT32_C(0x2) << 3) + #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_LAST \ + HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_IPV6 /* - * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' - * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. + * when set to 1, indicates TX flow offload for function specified in src_fid and + * the dst_fid should be set to invalid value. To indicate a VM to VM flow, both + * of the path_tx and path_rx flags need to be set. For virtio vSwitch offload + * case, the src_fid and dst_fid is set to the same fid value. For the SRIOV + * vSwitch offload case, the src_fid and dst_fid must be set to the same VF FID + * belong to the children VFs of the same PF to indicate VM to VM flow. */ - uint8_t valid; -} __attribute__((packed)); - -/************************** - * hwrm_ring_aggint_qcaps * - **************************/ - - -/* hwrm_ring_aggint_qcaps_input (size:128b/16B) */ -struct hwrm_ring_aggint_qcaps_input { - /* The HWRM command request type. */ - uint16_t req_type; + #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_PATH_TX \ + UINT32_C(0x40) /* - * The completion ring to send the completion event on. This should - * be the NQ ID returned from the `nq_alloc` HWRM command. + * when set to 1, indicates RX flow offload for function specified in dst_fid and + * the src_fid should be set to invalid value. */ - uint16_t cmpl_ring; + #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_PATH_RX \ + UINT32_C(0x80) /* - * The sequence ID is used by the driver for tracking multiple - * commands. This ID is treated as opaque data by the firmware and - * the value is returned in the `hwrm_resp_hdr` upon completion. + * Set to 1 to indicate matching of VXLAN VNI from the custom vxlan header is + * required and the VXLAN VNI value is stored in the first 24 bits of the dmac field. + * This flag is only valid when the flow direction is RX. */ - uint16_t seq_id; + #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_MATCH_VXLAN_IP_VNI \ + UINT32_C(0x100) + /* Set to 1 to indicate vhost_id is specified in the outer_vlan_tci field. */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_VHOST_ID_USE_VLAN \ + UINT32_C(0x200) /* - * The target ID of the command: - * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors - * * 0xFFFF - HWRM + * Tx Flow: vf fid. + * Rx Flow: pf fid. */ - uint16_t target_id; + uint16_t src_fid; + /* Tunnel handle valid when tunnel flag is set. */ + uint32_t tunnel_handle; + uint16_t action_flags; /* - * A physical address pointer pointing to a host buffer that the - * command's response data will be written. This can be either a host - * physical address (HPA) or a guest physical address (GPA) and must - * point to a physically contiguous block of memory. + * Setting of this flag indicates drop action. If this flag is not set, + * then it should be considered accept action. */ - uint64_t resp_addr; -} __attribute__((packed)); - -/* hwrm_ring_aggint_qcaps_output (size:384b/48B) */ -struct hwrm_ring_aggint_qcaps_output { - /* The specific error status for the command. */ - uint16_t error_code; - /* The HWRM command request type. */ - uint16_t req_type; - /* The sequence ID from the original command. */ - uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; - uint32_t cmpl_params; + #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_FWD \ + UINT32_C(0x1) + /* recycle is 1 b */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_RECYCLE \ + UINT32_C(0x2) /* - * When this bit is set to '1', int_lat_tmr_min can be configured - * on completion rings. + * Setting of this flag indicates drop action. If this flag is not set, + * then it should be considered accept action. + */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_DROP \ + UINT32_C(0x4) + /* meter is 1 b */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_METER \ + UINT32_C(0x8) + /* tunnel is 1 b */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_TUNNEL \ + UINT32_C(0x10) + /* nat_src is 1 b */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_NAT_SRC \ + UINT32_C(0x20) + /* nat_dest is 1 b */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_NAT_DEST \ + UINT32_C(0x40) + /* nat_ipv4_address is 1 b */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_NAT_IPV4_ADDRESS \ + UINT32_C(0x80) + /* l2_header_rewrite is 1 b */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_L2_HEADER_REWRITE \ + UINT32_C(0x100) + /* ttl_decrement is 1 b */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_TTL_DECREMENT \ + UINT32_C(0x200) + /* + * If set to 1 and flow direction is TX, it indicates decap of L2 header + * and encap of tunnel header. If set to 1 and flow direction is RX, it + * indicates decap of tunnel header and encap L2 header. The type of tunnel + * is specified in the tunnel_type field. */ - #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_INT_LAT_TMR_MIN \ - UINT32_C(0x1) + #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_TUNNEL_IP \ + UINT32_C(0x400) + /* If set to 1, flow aging is enabled for this flow. */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_FLOW_AGING_ENABLED \ + UINT32_C(0x800) /* - * When this bit is set to '1', int_lat_tmr_max can be configured - * on completion rings. + * If set to 1 an attempt will be made to try to offload this flow to the + * most optimal flow table resource. If set to 0, the flow will be + * placed to the default flow table resource. */ - #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_INT_LAT_TMR_MAX \ - UINT32_C(0x2) + #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_PRI_HINT \ + UINT32_C(0x1000) /* - * When this bit is set to '1', timer_reset can be enabled - * on completion rings. + * If set to 1 there will be no attempt to allocate an on-chip try to + * offload this flow. If set to 0, which will keep compatibility with the + * older drivers, will cause the FW to attempt to allocate an on-chip flow + * counter for the newly created flow. This will keep the existing behavior + * with EM flows which always had an associated flow counter. */ - #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_TIMER_RESET \ - UINT32_C(0x4) + #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_NO_FLOW_COUNTER_ALLOC \ + UINT32_C(0x2000) /* - * When this bit is set to '1', ring_idle can be enabled - * on completion rings. + * Tx Flow: pf or vf fid. + * Rx Flow: vf fid. */ - #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_RING_IDLE \ - UINT32_C(0x8) + uint16_t dst_fid; + /* VLAN tpid, valid when push_vlan flag is set. */ + uint16_t l2_rewrite_vlan_tpid; + /* VLAN tci, valid when push_vlan flag is set. */ + uint16_t l2_rewrite_vlan_tci; + /* Meter id, valid when meter flag is set. */ + uint16_t act_meter_id; + /* Flow with the same l2 context tcam key. */ + uint16_t ref_flow_handle; + /* This value sets the match value for the ethertype. */ + uint16_t ethertype; + /* valid when num tags is 1 or 2. */ + uint16_t outer_vlan_tci; + /* This value sets the match value for the Destination MAC address. */ + uint16_t dmac[3]; + /* valid when num tags is 2. */ + uint16_t inner_vlan_tci; + /* This value sets the match value for the Source MAC address. */ + uint16_t smac[3]; + /* The bit length of destination IP address mask. */ + uint8_t ip_dst_mask_len; + /* The bit length of source IP address mask. */ + uint8_t ip_src_mask_len; + /* The value of destination IPv4/IPv6 address. */ + uint32_t ip_dst[4]; + /* The source IPv4/IPv6 address. */ + uint32_t ip_src[4]; /* - * When this bit is set to '1', num_cmpl_dma_aggr can be configured - * on completion rings. + * The value of source port. + * Applies to UDP and TCP traffic. */ - #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_NUM_CMPL_DMA_AGGR \ - UINT32_C(0x10) + uint16_t l4_src_port; /* - * When this bit is set to '1', num_cmpl_dma_aggr_during_int can be configured - * on completion rings. + * The value of source port mask. + * Applies to UDP and TCP traffic. */ - #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_NUM_CMPL_DMA_AGGR_DURING_INT \ - UINT32_C(0x20) + uint16_t l4_src_port_mask; /* - * When this bit is set to '1', cmpl_aggr_dma_tmr can be configured - * on completion rings. + * The value of destination port. + * Applies to UDP and TCP traffic. */ - #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_CMPL_AGGR_DMA_TMR \ - UINT32_C(0x40) + uint16_t l4_dst_port; /* - * When this bit is set to '1', cmpl_aggr_dma_tmr_during_int can be configured - * on completion rings. + * The value of destination port mask. + * Applies to UDP and TCP traffic. */ - #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_CMPL_AGGR_DMA_TMR_DURING_INT \ - UINT32_C(0x80) + uint16_t l4_dst_port_mask; /* - * When this bit is set to '1', num_cmpl_aggr_int can be configured - * on completion rings. + * NAT IPv4/6 address based on address type flag. + * 0 values are ignored. */ - #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_NUM_CMPL_AGGR_INT \ - UINT32_C(0x100) - uint32_t nq_params; + uint32_t nat_ip_address[4]; + /* L2 header re-write Destination MAC address. */ + uint16_t l2_rewrite_dmac[3]; /* - * When this bit is set to '1', int_lat_tmr_min can be configured - * on notification queues. + * The NAT source/destination port based on direction flag. + * Applies to UDP and TCP traffic. + * 0 values are ignored. */ - #define HWRM_RING_AGGINT_QCAPS_OUTPUT_NQ_PARAMS_INT_LAT_TMR_MIN \ + uint16_t nat_port; + /* L2 header re-write Source MAC address. */ + uint16_t l2_rewrite_smac[3]; + /* The value of ip protocol. */ + uint8_t ip_proto; + /* Tunnel Type. */ + uint8_t tunnel_type; + /* Non-tunnel */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \ + UINT32_C(0x0) + /* Virtual eXtensible Local Area Network (VXLAN) */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \ UINT32_C(0x1) - /* Minimum value for num_cmpl_dma_aggr */ - uint16_t num_cmpl_dma_aggr_min; - /* Maximum value for num_cmpl_dma_aggr */ - uint16_t num_cmpl_dma_aggr_max; - /* Minimum value for num_cmpl_dma_aggr_during_int */ - uint16_t num_cmpl_dma_aggr_during_int_min; - /* Maximum value for num_cmpl_dma_aggr_during_int */ - uint16_t num_cmpl_dma_aggr_during_int_max; - /* Minimum value for cmpl_aggr_dma_tmr */ - uint16_t cmpl_aggr_dma_tmr_min; - /* Maximum value for cmpl_aggr_dma_tmr */ - uint16_t cmpl_aggr_dma_tmr_max; - /* Minimum value for cmpl_aggr_dma_tmr_during_int */ - uint16_t cmpl_aggr_dma_tmr_during_int_min; - /* Maximum value for cmpl_aggr_dma_tmr_during_int */ - uint16_t cmpl_aggr_dma_tmr_during_int_max; - /* Minimum value for int_lat_tmr_min */ - uint16_t int_lat_tmr_min_min; - /* Maximum value for int_lat_tmr_min */ - uint16_t int_lat_tmr_min_max; - /* Minimum value for int_lat_tmr_max */ - uint16_t int_lat_tmr_max_min; - /* Maximum value for int_lat_tmr_max */ - uint16_t int_lat_tmr_max_max; - /* Minimum value for num_cmpl_aggr_int */ - uint16_t num_cmpl_aggr_int_min; - /* Maximum value for num_cmpl_aggr_int */ - uint16_t num_cmpl_aggr_int_max; - /* The units for timer parameters, in nanoseconds. */ - uint16_t timer_units; - uint8_t unused_0[1]; + /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \ + UINT32_C(0x2) + /* Generic Routing Encapsulation (GRE) inside Ethernet payload */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \ + UINT32_C(0x3) + /* IP in IP */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPIP \ + UINT32_C(0x4) + /* Generic Network Virtualization Encapsulation (Geneve) */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \ + UINT32_C(0x5) + /* Multi-Protocol Label Switching (MPLS) */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_MPLS \ + UINT32_C(0x6) + /* Stateless Transport Tunnel (STT) */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_STT \ + UINT32_C(0x7) + /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \ + UINT32_C(0x8) + /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \ + UINT32_C(0x9) + /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \ + UINT32_C(0xa) + /* Use fixed layer 2 ether type of 0xFFFF */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_L2_ETYPE \ + UINT32_C(0xb) + /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \ + UINT32_C(0xc) + /* Any tunneled traffic */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \ + UINT32_C(0xff) + #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_LAST \ + HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL +} __rte_packed; + +/* hwrm_cfa_flow_alloc_output (size:256b/32B) */ +struct hwrm_cfa_flow_alloc_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* Flow record index. */ + uint16_t flow_handle; + uint8_t unused_0[2]; + /* + * The flow id value in bit 0-29 is the actual ID of the flow + * associated with this filter and it shall be used to match + * and associate the flow identifier returned in completion + * records. A value of 0xFFFFFFFF in the 32-bit flow_id field + * shall indicate no valid flow id. + */ + uint32_t flow_id; + /* Indicate the flow id value. */ + #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_VALUE_MASK \ + UINT32_C(0x3fffffff) + #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_VALUE_SFT 0 + /* Indicate type of the flow. */ + #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE \ + UINT32_C(0x40000000) + /* + * If this bit set to 0, then it indicates that the flow is + * internal flow. + */ + #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE_INT \ + (UINT32_C(0x0) << 30) + /* + * If this bit is set to 1, then it indicates that the flow is + * external flow. + */ + #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT \ + (UINT32_C(0x1) << 30) + #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE_LAST \ + HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT + /* Indicate the flow direction. */ + #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR \ + UINT32_C(0x80000000) + /* If this bit set to 0, then it indicates rx flow. */ + #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR_RX \ + (UINT32_C(0x0) << 31) + /* If this bit is set to 1, then it indicates that tx flow. */ + #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR_TX \ + (UINT32_C(0x1) << 31) + #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR_LAST \ + HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR_TX + /* This value identifies a set of CFA data structures used for a flow. */ + uint64_t ext_flow_handle; + uint32_t flow_counter_id; + uint8_t unused_1[3]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/************************************** - * hwrm_ring_cmpl_ring_qaggint_params * - **************************************/ +/* hwrm_cfa_flow_alloc_cmd_err (size:64b/8B) */ +struct hwrm_cfa_flow_alloc_cmd_err { + /* + * command specific error codes that goes to + * the cmd_err field in Common HWRM Error Response. + */ + uint8_t code; + /* Unknown error */ + #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0) + /* No more L2 Context TCAM */ + #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_L2_CONTEXT_TCAM UINT32_C(0x1) + /* No more action records */ + #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_ACTION_RECORD UINT32_C(0x2) + /* No more flow counters */ + #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_FLOW_COUNTER UINT32_C(0x3) + /* No more wild-card TCAM */ + #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_WILD_CARD_TCAM UINT32_C(0x4) + /* Hash collsion in exact match tables */ + #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_HASH_COLLISION UINT32_C(0x5) + /* Key is already installed */ + #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_KEY_EXISTS UINT32_C(0x6) + /* Flow Context DB is out of resource */ + #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_FLOW_CTXT_DB UINT32_C(0x7) + #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_LAST \ + HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_FLOW_CTXT_DB + uint8_t unused_0[7]; +} __rte_packed; + +/********************** + * hwrm_cfa_flow_free * + **********************/ -/* hwrm_ring_cmpl_ring_qaggint_params_input (size:192b/24B) */ -struct hwrm_ring_cmpl_ring_qaggint_params_input { +/* hwrm_cfa_flow_free_input (size:256b/32B) */ +struct hwrm_cfa_flow_free_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -20383,7 +33930,8 @@ struct hwrm_ring_cmpl_ring_qaggint_params_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -20394,13 +33942,17 @@ struct hwrm_ring_cmpl_ring_qaggint_params_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* Physical number of completion ring. */ - uint16_t ring_id; - uint8_t unused_0[6]; -} __attribute__((packed)); + /* Flow record index. */ + uint16_t flow_handle; + uint16_t unused_0; + /* Flow counter id to be freed. */ + uint32_t flow_counter_id; + /* This value identifies a set of CFA data structures used for a flow. */ + uint64_t ext_flow_handle; +} __rte_packed; -/* hwrm_ring_cmpl_ring_qaggint_params_output (size:256b/32B) */ -struct hwrm_ring_cmpl_ring_qaggint_params_output { +/* hwrm_cfa_flow_free_output (size:256b/32B) */ +struct hwrm_cfa_flow_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -20409,70 +33961,251 @@ struct hwrm_ring_cmpl_ring_qaggint_params_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - uint16_t flags; - /* - * When this bit is set to '1', interrupt max - * timer is reset whenever a completion is received. - */ - #define HWRM_RING_CMPL_RING_QAGGINT_PARAMS_OUTPUT_FLAGS_TIMER_RESET \ - UINT32_C(0x1) - /* - * When this bit is set to '1', ring idle mode - * aggregation will be enabled. - */ - #define HWRM_RING_CMPL_RING_QAGGINT_PARAMS_OUTPUT_FLAGS_RING_IDLE \ - UINT32_C(0x2) - /* - * Number of completions to aggregate before DMA - * during the normal mode. - */ - uint16_t num_cmpl_dma_aggr; - /* - * Number of completions to aggregate before DMA - * during the interrupt mode. - */ - uint16_t num_cmpl_dma_aggr_during_int; - /* - * Timer in unit of 80-nsec used to aggregate completions before - * DMA during the normal mode (not in interrupt mode). - */ - uint16_t cmpl_aggr_dma_tmr; - /* - * Timer in unit of 80-nsec used to aggregate completions before - * DMA during the interrupt mode. - */ - uint16_t cmpl_aggr_dma_tmr_during_int; - /* Minimum time (in unit of 80-nsec) between two interrupts. */ - uint16_t int_lat_tmr_min; - /* - * Maximum wait time (in unit of 80-nsec) spent aggregating - * completions before signaling the interrupt after the - * interrupt is enabled. - */ - uint16_t int_lat_tmr_max; - /* - * Minimum number of completions aggregated before signaling - * an interrupt. - */ - uint16_t num_cmpl_aggr_int; + /* packet is 64 b */ + uint64_t packet; + /* byte is 64 b */ + uint64_t byte; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/***************************************** - * hwrm_ring_cmpl_ring_cfg_aggint_params * - *****************************************/ +/* hwrm_cfa_flow_action_data (size:960b/120B) */ +struct hwrm_cfa_flow_action_data { + uint16_t action_flags; + /* Setting of this flag indicates accept action. */ + #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_FWD \ + UINT32_C(0x1) + /* Setting of this flag indicates recycle action. */ + #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_RECYCLE \ + UINT32_C(0x2) + /* Setting of this flag indicates drop action. */ + #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_DROP \ + UINT32_C(0x4) + /* Setting of this flag indicates meter action. */ + #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_METER \ + UINT32_C(0x8) + /* Setting of this flag indicates tunnel action. */ + #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_TUNNEL \ + UINT32_C(0x10) + /* + * If set to 1 and flow direction is TX, it indicates decap of L2 header + * and encap of tunnel header. If set to 1 and flow direction is RX, it + * indicates decap of tunnel header and encap L2 header. + */ + #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_TUNNEL_IP \ + UINT32_C(0x20) + /* Setting of this flag indicates ttl decrement action. */ + #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_TTL_DECREMENT \ + UINT32_C(0x40) + /* If set to 1, flow aging is enabled for this flow. */ + #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_FLOW_AGING_ENABLED \ + UINT32_C(0x80) + /* Setting of this flag indicates encap action. */ + #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_ENCAP \ + UINT32_C(0x100) + /* Setting of this flag indicates decap action. */ + #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_DECAP \ + UINT32_C(0x200) + /* Meter id. */ + uint16_t act_meter_id; + /* VNIC id. */ + uint16_t vnic_id; + /* vport number. */ + uint16_t vport_id; + /* The NAT source/destination. */ + uint16_t nat_port; + uint16_t unused_0[3]; + /* NAT IPv4/IPv6 address. */ + uint32_t nat_ip_address[4]; + /* Encapsulation Type. */ + uint8_t encap_type; + /* Virtual eXtensible Local Area Network (VXLAN) */ + #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_VXLAN UINT32_C(0x1) + /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ + #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_NVGRE UINT32_C(0x2) + /* Generic Routing Encapsulation (GRE) after inside Ethernet payload */ + #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_L2GRE UINT32_C(0x3) + /* IP in IP */ + #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_IPIP UINT32_C(0x4) + /* Generic Network Virtualization Encapsulation (Geneve) */ + #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_GENEVE UINT32_C(0x5) + /* Multi-Protocol Label Switching (MPLS) */ + #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_MPLS UINT32_C(0x6) + /* VLAN */ + #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_VLAN UINT32_C(0x7) + /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ + #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_IPGRE UINT32_C(0x8) + /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ + #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_VXLAN_V4 UINT32_C(0x9) + /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ + #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_IPGRE_V1 UINT32_C(0xa) + /* Use fixed layer 2 ether type of 0xFFFF */ + #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_L2_ETYPE UINT32_C(0xb) + /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */ + #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_VXLAN_GPE_V6 UINT32_C(0xc) + #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_LAST \ + HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_VXLAN_GPE_V6 + uint8_t unused[7]; + /* This value is encap data for the associated encap type. */ + uint32_t encap_data[20]; +} __rte_packed; + +/* hwrm_cfa_flow_tunnel_hdr_data (size:64b/8B) */ +struct hwrm_cfa_flow_tunnel_hdr_data { + /* Tunnel Type. */ + uint8_t tunnel_type; + /* Non-tunnel */ + #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_NONTUNNEL \ + UINT32_C(0x0) + /* Virtual eXtensible Local Area Network (VXLAN) */ + #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_VXLAN \ + UINT32_C(0x1) + /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ + #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_NVGRE \ + UINT32_C(0x2) + /* Generic Routing Encapsulation (GRE) inside Ethernet payload */ + #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_L2GRE \ + UINT32_C(0x3) + /* IP in IP */ + #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_IPIP \ + UINT32_C(0x4) + /* Generic Network Virtualization Encapsulation (Geneve) */ + #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_GENEVE \ + UINT32_C(0x5) + /* Multi-Protocol Label Switching (MPLS) */ + #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_MPLS \ + UINT32_C(0x6) + /* Stateless Transport Tunnel (STT) */ + #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_STT \ + UINT32_C(0x7) + /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ + #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_IPGRE \ + UINT32_C(0x8) + /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ + #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_VXLAN_V4 \ + UINT32_C(0x9) + /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ + #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_IPGRE_V1 \ + UINT32_C(0xa) + /* Use fixed layer 2 ether type of 0xFFFF */ + #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_L2_ETYPE \ + UINT32_C(0xb) + /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */ + #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_VXLAN_GPE_V6 \ + UINT32_C(0xc) + /* Any tunneled traffic */ + #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_ANYTUNNEL \ + UINT32_C(0xff) + #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_LAST \ + HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_ANYTUNNEL + uint8_t unused[3]; + /* + * Tunnel identifier. + * Virtual Network Identifier (VNI). + */ + uint32_t tunnel_id; +} __rte_packed; +/* hwrm_cfa_flow_l4_key_data (size:64b/8B) */ +struct hwrm_cfa_flow_l4_key_data { + /* The value of source port. */ + uint16_t l4_src_port; + /* The value of destination port. */ + uint16_t l4_dst_port; + uint32_t unused; +} __rte_packed; -/* hwrm_ring_cmpl_ring_cfg_aggint_params_input (size:320b/40B) */ -struct hwrm_ring_cmpl_ring_cfg_aggint_params_input { +/* hwrm_cfa_flow_l3_key_data (size:512b/64B) */ +struct hwrm_cfa_flow_l3_key_data { + /* The value of ip protocol. */ + uint8_t ip_protocol; + uint8_t unused_0[7]; + /* The value of destination IPv4/IPv6 address. */ + uint32_t ip_dst[4]; + /* The source IPv4/IPv6 address. */ + uint32_t ip_src[4]; + /* NAT IPv4/IPv6 address. */ + uint32_t nat_ip_address[4]; + uint32_t unused[2]; +} __rte_packed; + +/* hwrm_cfa_flow_l2_key_data (size:448b/56B) */ +struct hwrm_cfa_flow_l2_key_data { + /* Destination MAC address. */ + uint16_t dmac[3]; + uint16_t unused_0; + /* Source MAC address. */ + uint16_t smac[3]; + uint16_t unused_1; + /* L2 header re-write Destination MAC address. */ + uint16_t l2_rewrite_dmac[3]; + uint16_t unused_2; + /* L2 header re-write Source MAC address. */ + uint16_t l2_rewrite_smac[3]; + /* Ethertype. */ + uint16_t ethertype; + /* Number of VLAN tags. */ + uint16_t num_vlan_tags; + /* VLAN tpid. */ + uint16_t l2_rewrite_vlan_tpid; + /* VLAN tci. */ + uint16_t l2_rewrite_vlan_tci; + uint8_t unused_3[2]; + /* Outer VLAN TPID. */ + uint16_t ovlan_tpid; + /* Outer VLAN TCI. */ + uint16_t ovlan_tci; + /* Inner VLAN TPID. */ + uint16_t ivlan_tpid; + /* Inner VLAN TCI. */ + uint16_t ivlan_tci; + uint8_t unused[8]; +} __rte_packed; + +/* hwrm_cfa_flow_key_data (size:4160b/520B) */ +struct hwrm_cfa_flow_key_data { + /* Flow associated tunnel L2 header key info. */ + uint32_t t_l2_key_data[14]; + /* Flow associated tunnel L2 header mask info. */ + uint32_t t_l2_key_mask[14]; + /* Flow associated tunnel L3 header key info. */ + uint32_t t_l3_key_data[16]; + /* Flow associated tunnel L3 header mask info. */ + uint32_t t_l3_key_mask[16]; + /* Flow associated tunnel L4 header key info. */ + uint32_t t_l4_key_data[2]; + /* Flow associated tunnel L4 header mask info. */ + uint32_t t_l4_key_mask[2]; + /* Flow associated tunnel header info. */ + uint32_t tunnel_hdr[2]; + /* Flow associated L2 header key info. */ + uint32_t l2_key_data[14]; + /* Flow associated L2 header mask info. */ + uint32_t l2_key_mask[14]; + /* Flow associated L3 header key info. */ + uint32_t l3_key_data[16]; + /* Flow associated L3 header mask info. */ + uint32_t l3_key_mask[16]; + /* Flow associated L4 header key info. */ + uint32_t l4_key_data[2]; + /* Flow associated L4 header mask info. */ + uint32_t l4_key_mask[2]; +} __rte_packed; + +/********************** + * hwrm_cfa_flow_info * + **********************/ + + +/* hwrm_cfa_flow_info_input (size:256b/32B) */ +struct hwrm_cfa_flow_info_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -20489,7 +34222,8 @@ struct hwrm_ring_cmpl_ring_cfg_aggint_params_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -20500,109 +34234,31 @@ struct hwrm_ring_cmpl_ring_cfg_aggint_params_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* Physical number of completion ring. */ - uint16_t ring_id; - uint16_t flags; - /* - * When this bit is set to '1', interrupt latency max - * timer is reset whenever a completion is received. - */ - #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_FLAGS_TIMER_RESET \ - UINT32_C(0x1) - /* - * When this bit is set to '1', ring idle mode - * aggregation will be enabled. - */ - #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_FLAGS_RING_IDLE \ - UINT32_C(0x2) - /* - * Set this flag to 1 when configuring parameters on a - * notification queue. Set this flag to 0 when configuring - * parameters on a completion queue. - */ - #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_FLAGS_IS_NQ \ - UINT32_C(0x4) - /* - * Number of completions to aggregate before DMA - * during the normal mode. - */ - uint16_t num_cmpl_dma_aggr; - /* - * Number of completions to aggregate before DMA - * during the interrupt mode. - */ - uint16_t num_cmpl_dma_aggr_during_int; - /* - * Timer in unit of 80-nsec used to aggregate completions before - * DMA during the normal mode (not in interrupt mode). - */ - uint16_t cmpl_aggr_dma_tmr; - /* - * Timer in unit of 80-nsec used to aggregate completions before - * DMA during the interrupt mode. - */ - uint16_t cmpl_aggr_dma_tmr_during_int; - /* Minimum time (in unit of 80-nsec) between two interrupts. */ - uint16_t int_lat_tmr_min; - /* - * Maximum wait time (in unit of 80-nsec) spent aggregating - * cmpls before signaling the interrupt after the - * interrupt is enabled. - */ - uint16_t int_lat_tmr_max; - /* - * Minimum number of completions aggregated before signaling - * an interrupt. - */ - uint16_t num_cmpl_aggr_int; - /* - * Bitfield that indicates which parameters are to be applied. Only - * required when configuring devices with notification queues, and - * used in that case to set certain parameters on completion queues - * and others on notification queues. - */ - uint16_t enables; - /* - * This bit must be '1' for the num_cmpl_dma_aggr field to be - * configured. - */ - #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_NUM_CMPL_DMA_AGGR \ - UINT32_C(0x1) - /* - * This bit must be '1' for the num_cmpl_dma_aggr_during_int field to be - * configured. - */ - #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_NUM_CMPL_DMA_AGGR_DURING_INT \ - UINT32_C(0x2) - /* - * This bit must be '1' for the cmpl_aggr_dma_tmr field to be - * configured. - */ - #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_CMPL_AGGR_DMA_TMR \ - UINT32_C(0x4) - /* - * This bit must be '1' for the int_lat_tmr_min field to be - * configured. - */ - #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_INT_LAT_TMR_MIN \ - UINT32_C(0x8) - /* - * This bit must be '1' for the int_lat_tmr_max field to be - * configured. - */ - #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_INT_LAT_TMR_MAX \ - UINT32_C(0x10) - /* - * This bit must be '1' for the num_cmpl_aggr_int field to be - * configured. - */ - #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_NUM_CMPL_AGGR_INT \ - UINT32_C(0x20) - uint8_t unused_0[4]; -} __attribute__((packed)); + /* Flow record index. */ + uint16_t flow_handle; + /* Max flow handle */ + #define HWRM_CFA_FLOW_INFO_INPUT_FLOW_HANDLE_MAX_MASK \ + UINT32_C(0xfff) + #define HWRM_CFA_FLOW_INFO_INPUT_FLOW_HANDLE_MAX_SFT 0 + /* CNP flow handle */ + #define HWRM_CFA_FLOW_INFO_INPUT_FLOW_HANDLE_CNP_CNT \ + UINT32_C(0x1000) + /* RoCEv1 flow handle */ + #define HWRM_CFA_FLOW_INFO_INPUT_FLOW_HANDLE_ROCEV1_CNT \ + UINT32_C(0x2000) + /* RoCEv2 flow handle */ + #define HWRM_CFA_FLOW_INFO_INPUT_FLOW_HANDLE_ROCEV2_CNT \ + UINT32_C(0x4000) + /* Direction rx = 1 */ + #define HWRM_CFA_FLOW_INFO_INPUT_FLOW_HANDLE_DIR_RX \ + UINT32_C(0x8000) + uint8_t unused_0[6]; + /* This value identifies a set of CFA data structures used for a flow. */ + uint64_t ext_flow_handle; +} __rte_packed; -/* hwrm_ring_cmpl_ring_cfg_aggint_params_output (size:128b/16B) */ -struct hwrm_ring_cmpl_ring_cfg_aggint_params_output { +/* hwrm_cfa_flow_info_output (size:5632b/704B) */ +struct hwrm_cfa_flow_info_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -20611,24 +34267,56 @@ struct hwrm_ring_cmpl_ring_cfg_aggint_params_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - uint8_t unused_0[7]; + uint8_t flags; + /* When set to 1, indicates the configuration is the TX flow. */ + #define HWRM_CFA_FLOW_INFO_OUTPUT_FLAGS_PATH_TX UINT32_C(0x1) + /* When set to 1, indicates the configuration is the RX flow. */ + #define HWRM_CFA_FLOW_INFO_OUTPUT_FLAGS_PATH_RX UINT32_C(0x2) + /* profile is 8 b */ + uint8_t profile; + /* src_fid is 16 b */ + uint16_t src_fid; + /* dst_fid is 16 b */ + uint16_t dst_fid; + /* l2_ctxt_id is 16 b */ + uint16_t l2_ctxt_id; + /* em_info is 64 b */ + uint64_t em_info; + /* tcam_info is 64 b */ + uint64_t tcam_info; + /* vfp_tcam_info is 64 b */ + uint64_t vfp_tcam_info; + /* ar_id is 16 b */ + uint16_t ar_id; + /* flow_handle is 16 b */ + uint16_t flow_handle; + /* tunnel_handle is 32 b */ + uint32_t tunnel_handle; + /* The flow aging timer for the flow, the unit is 100 milliseconds */ + uint16_t flow_timer; + uint8_t unused_0[6]; + /* Flow associated L2, L3 and L4 headers info. */ + uint32_t flow_key_data[130]; + /* Flow associated action record info. */ + uint32_t flow_action_info[30]; + uint8_t unused_1[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; /*********************** - * hwrm_ring_grp_alloc * + * hwrm_cfa_flow_flush * ***********************/ -/* hwrm_ring_grp_alloc_input (size:192b/24B) */ -struct hwrm_ring_grp_alloc_input { +/* hwrm_cfa_flow_flush_input (size:256b/32B) */ +struct hwrm_cfa_flow_flush_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -20645,7 +34333,8 @@ struct hwrm_ring_grp_alloc_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -20656,31 +34345,86 @@ struct hwrm_ring_grp_alloc_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; + /* flags is 32 b */ + uint32_t flags; /* - * This value identifies the CR associated with the ring - * group. - */ - uint16_t cr; - /* - * This value identifies the main RR associated with the ring - * group. + * Set to 1 to indicate the page size, page layers, and flow_handle_table_dma_addr + * fields are valid. The flow flush operation should only flush the flows from the + * flow table specified. This flag is set to 0 by older driver. For older firmware, + * setting this flag has no effect. */ - uint16_t rr; + #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_TABLE_VALID \ + UINT32_C(0x1) /* - * This value identifies the aggregation RR associated with - * the ring group. If this value is 0xFF... (All Fs), then no - * Aggregation ring will be set. + * Set to 1 to indicate flow flush operation to cleanup all the flows, meters, CFA + * context memory tables etc. This flag is set to 0 by older driver. For older firmware, + * setting this flag has no effect. */ - uint16_t ar; + #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_RESET_ALL \ + UINT32_C(0x2) /* - * This value identifies the statistics context associated - * with the ring group. + * Set to 1 to indicate flow flush operation to cleanup all the flows by the caller. + * This flag is set to 0 by older driver. For older firmware, setting this flag has no effect. */ - uint16_t sc; -} __attribute__((packed)); + #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_RESET_PORT \ + UINT32_C(0x4) + /* Set to 1 to indicate the flow counter IDs are included in the flow table. */ + #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_INCL_FC \ + UINT32_C(0x8000000) + /* + * This specifies the size of flow handle entries provided by the driver + * in the flow table specified below. Only two flow handle size enums are defined. + */ + #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_ENTRY_SIZE_MASK \ + UINT32_C(0xc0000000) + #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_ENTRY_SIZE_SFT \ + 30 + /* The flow handle is 16bit */ + #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_ENTRY_SIZE_FLOW_HND_16BIT \ + (UINT32_C(0x0) << 30) + /* The flow handle is 64bit */ + #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_ENTRY_SIZE_FLOW_HND_64BIT \ + (UINT32_C(0x1) << 30) + #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_ENTRY_SIZE_LAST \ + HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_ENTRY_SIZE_FLOW_HND_64BIT + /* Specify page size of the flow table memory. */ + uint8_t page_size; + /* The page size is 4K */ + #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_4K UINT32_C(0x0) + /* The page size is 8K */ + #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_8K UINT32_C(0x1) + /* The page size is 64K */ + #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_64K UINT32_C(0x4) + /* The page size is 256K */ + #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_256K UINT32_C(0x6) + /* The page size is 1M */ + #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_1M UINT32_C(0x8) + /* The page size is 2M */ + #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_2M UINT32_C(0x9) + /* The page size is 4M */ + #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_4M UINT32_C(0xa) + /* The page size is 1G */ + #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_1G UINT32_C(0x12) + #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_LAST \ + HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_1G + /* FLow table memory indirect levels. */ + uint8_t page_level; + /* PBL pointer is physical start address. */ + #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2) + #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_LEVEL_LAST \ + HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_LEVEL_LVL_2 + /* number of flows in the flow table */ + uint16_t num_flows; + /* Pointer to the PBL, or PDL depending on number of levels */ + uint64_t page_dir; +} __rte_packed; -/* hwrm_ring_grp_alloc_output (size:128b/16B) */ -struct hwrm_ring_grp_alloc_output { +/* hwrm_cfa_flow_flush_output (size:128b/16B) */ +struct hwrm_cfa_flow_flush_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -20689,30 +34433,24 @@ struct hwrm_ring_grp_alloc_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* - * This is the ring group ID value. Use this value to program - * the default ring group for the VNIC or as table entries - * in an RSS/COS context. - */ - uint32_t ring_group_id; - uint8_t unused_0[3]; + uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/********************** - * hwrm_ring_grp_free * - **********************/ +/*********************** + * hwrm_cfa_flow_stats * + ***********************/ -/* hwrm_ring_grp_free_input (size:192b/24B) */ -struct hwrm_ring_grp_free_input { +/* hwrm_cfa_flow_stats_input (size:640b/80B) */ +struct hwrm_cfa_flow_stats_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -20729,7 +34467,8 @@ struct hwrm_ring_grp_free_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -20740,13 +34479,53 @@ struct hwrm_ring_grp_free_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* This is the ring group ID value. */ - uint32_t ring_group_id; - uint8_t unused_0[4]; -} __attribute__((packed)); + /* Flow handle. */ + uint16_t num_flows; + /* Flow handle. */ + uint16_t flow_handle_0; + /* Flow handle. */ + uint16_t flow_handle_1; + /* Flow handle. */ + uint16_t flow_handle_2; + /* Flow handle. */ + uint16_t flow_handle_3; + /* Flow handle. */ + uint16_t flow_handle_4; + /* Flow handle. */ + uint16_t flow_handle_5; + /* Flow handle. */ + uint16_t flow_handle_6; + /* Flow handle. */ + uint16_t flow_handle_7; + /* Flow handle. */ + uint16_t flow_handle_8; + /* Flow handle. */ + uint16_t flow_handle_9; + uint8_t unused_0[2]; + /* Flow ID of a flow. */ + uint32_t flow_id_0; + /* Flow ID of a flow. */ + uint32_t flow_id_1; + /* Flow ID of a flow. */ + uint32_t flow_id_2; + /* Flow ID of a flow. */ + uint32_t flow_id_3; + /* Flow ID of a flow. */ + uint32_t flow_id_4; + /* Flow ID of a flow. */ + uint32_t flow_id_5; + /* Flow ID of a flow. */ + uint32_t flow_id_6; + /* Flow ID of a flow. */ + uint32_t flow_id_7; + /* Flow ID of a flow. */ + uint32_t flow_id_8; + /* Flow ID of a flow. */ + uint32_t flow_id_9; +} __rte_packed; -/* hwrm_ring_grp_free_output (size:128b/16B) */ -struct hwrm_ring_grp_free_output { +/* hwrm_cfa_flow_stats_output (size:1408b/176B) */ +struct hwrm_cfa_flow_stats_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -20755,24 +34534,64 @@ struct hwrm_ring_grp_free_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; + /* packet_0 is 64 b */ + uint64_t packet_0; + /* packet_1 is 64 b */ + uint64_t packet_1; + /* packet_2 is 64 b */ + uint64_t packet_2; + /* packet_3 is 64 b */ + uint64_t packet_3; + /* packet_4 is 64 b */ + uint64_t packet_4; + /* packet_5 is 64 b */ + uint64_t packet_5; + /* packet_6 is 64 b */ + uint64_t packet_6; + /* packet_7 is 64 b */ + uint64_t packet_7; + /* packet_8 is 64 b */ + uint64_t packet_8; + /* packet_9 is 64 b */ + uint64_t packet_9; + /* byte_0 is 64 b */ + uint64_t byte_0; + /* byte_1 is 64 b */ + uint64_t byte_1; + /* byte_2 is 64 b */ + uint64_t byte_2; + /* byte_3 is 64 b */ + uint64_t byte_3; + /* byte_4 is 64 b */ + uint64_t byte_4; + /* byte_5 is 64 b */ + uint64_t byte_5; + /* byte_6 is 64 b */ + uint64_t byte_6; + /* byte_7 is 64 b */ + uint64_t byte_7; + /* byte_8 is 64 b */ + uint64_t byte_8; + /* byte_9 is 64 b */ + uint64_t byte_9; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/**************************** - * hwrm_cfa_l2_filter_alloc * - ****************************/ +/*********************************** + * hwrm_cfa_flow_aging_timer_reset * + ***********************************/ -/* hwrm_cfa_l2_filter_alloc_input (size:768b/96B) */ -struct hwrm_cfa_l2_filter_alloc_input { +/* hwrm_cfa_flow_aging_timer_reset_input (size:256b/32B) */ +struct hwrm_cfa_flow_aging_timer_reset_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -20789,7 +34608,8 @@ struct hwrm_cfa_l2_filter_alloc_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -20800,342 +34620,444 @@ struct hwrm_cfa_l2_filter_alloc_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - uint32_t flags; - /* - * Enumeration denoting the RX, TX type of the resource. - * This enumeration is used for resources that are similar for both - * TX and RX paths of the chip. - */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH \ - UINT32_C(0x1) - /* tx path */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_TX \ - UINT32_C(0x0) - /* rx path */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX \ - UINT32_C(0x1) - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_LAST \ - HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX - /* Setting of this flag indicates the applicability to the loopback path. */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK \ - UINT32_C(0x2) - /* - * Setting of this flag indicates drop action. If this flag is not set, - * then it should be considered accept action. - */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_DROP \ - UINT32_C(0x4) - /* - * If this flag is set, all t_l2_* fields are invalid - * and they should not be specified. - * If this flag is set, then l2_* fields refer to - * fields of outermost L2 header. - */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOST \ - UINT32_C(0x8) - /* - * Enumeration denoting NO_ROCE_L2 to support old drivers. - * New driver L2 for only L2 traffic, ROCE for roce and l2 traffic - */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_MASK \ - UINT32_C(0x30) - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_SFT 4 - /* To support old drivers */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_NO_ROCE_L2 \ - (UINT32_C(0x0) << 4) - /* Only L2 traffic */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_L2 \ - (UINT32_C(0x1) << 4) - /* Roce & L2 traffic */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_ROCE \ - (UINT32_C(0x2) << 4) - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_LAST \ - HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_ROCE - uint32_t enables; - /* - * This bit must be '1' for the l2_addr field to be - * configured. - */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR \ - UINT32_C(0x1) - /* - * This bit must be '1' for the l2_addr_mask field to be - * configured. - */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR_MASK \ - UINT32_C(0x2) - /* - * This bit must be '1' for the l2_ovlan field to be - * configured. - */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN \ - UINT32_C(0x4) - /* - * This bit must be '1' for the l2_ovlan_mask field to be - * configured. - */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN_MASK \ - UINT32_C(0x8) + /* Flow record index. */ + uint16_t flow_handle; + uint8_t unused_0[2]; /* - * This bit must be '1' for the l2_ivlan field to be - * configured. + * New flow timer value for the flow specified in the ext_flow_handle. + * The flow timer unit is 100ms. */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN \ - UINT32_C(0x10) + uint32_t flow_timer; + /* This value identifies a set of CFA data structures used for a flow. */ + uint64_t ext_flow_handle; +} __rte_packed; + +/* hwrm_cfa_flow_aging_timer_reset_output (size:128b/16B) */ +struct hwrm_cfa_flow_aging_timer_reset_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; /* - * This bit must be '1' for the l2_ivlan_mask field to be - * configured. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN_MASK \ - UINT32_C(0x20) + uint8_t valid; +} __rte_packed; + +/*************************** + * hwrm_cfa_flow_aging_cfg * + ***************************/ + + +/* hwrm_cfa_flow_aging_cfg_input (size:384b/48B) */ +struct hwrm_cfa_flow_aging_cfg_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * This bit must be '1' for the t_l2_addr field to be - * configured. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR \ - UINT32_C(0x40) + uint16_t cmpl_ring; /* - * This bit must be '1' for the t_l2_addr_mask field to be - * configured. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR_MASK \ - UINT32_C(0x80) + uint16_t seq_id; /* - * This bit must be '1' for the t_l2_ovlan field to be - * configured. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN \ - UINT32_C(0x100) + uint16_t target_id; /* - * This bit must be '1' for the t_l2_ovlan_mask field to be - * configured. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN_MASK \ - UINT32_C(0x200) + uint64_t resp_addr; + /* The bit field to enable per flow aging configuration. */ + uint16_t enables; + /* This bit must be '1' for the tcp flow timer field to be configured */ + #define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_TCP_FLOW_TIMER \ + UINT32_C(0x1) + /* This bit must be '1' for the tcp finish timer field to be configured */ + #define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_TCP_FIN_TIMER \ + UINT32_C(0x2) + /* This bit must be '1' for the udp flow timer field to be configured */ + #define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_UDP_FLOW_TIMER \ + UINT32_C(0x4) + /* This bit must be '1' for the eem dma interval field to be configured */ + #define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_EEM_DMA_INTERVAL \ + UINT32_C(0x8) + /* This bit must be '1' for the eem notice interval field to be configured */ + #define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_EEM_NOTICE_INTERVAL \ + UINT32_C(0x10) + /* This bit must be '1' for the eem context memory maximum entries field to be configured */ + #define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_EEM_CTX_MAX_ENTRIES \ + UINT32_C(0x20) + /* This bit must be '1' for the eem context memory ID field to be configured */ + #define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_EEM_CTX_ID \ + UINT32_C(0x40) + /* This bit must be '1' for the eem context memory type field to be configured */ + #define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_EEM_CTX_MEM_TYPE \ + UINT32_C(0x80) + uint8_t flags; + /* Enumeration denoting the RX, TX type of the resource. */ + #define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_PATH UINT32_C(0x1) + /* tx path */ + #define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0) + /* rx path */ + #define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1) + #define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_PATH_LAST \ + HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_PATH_RX + /* Enumeration denoting the enable, disable eem flow aging configuration. */ + #define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_EEM UINT32_C(0x2) + /* tx path */ + #define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_EEM_DISABLE \ + (UINT32_C(0x0) << 1) + /* rx path */ + #define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_EEM_ENABLE \ + (UINT32_C(0x1) << 1) + #define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_EEM_LAST \ + HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_EEM_ENABLE + uint8_t unused_0; + /* The flow aging timer for all TCP flows, the unit is 100 milliseconds. */ + uint32_t tcp_flow_timer; + /* The TCP finished timer for all TCP flows, the unit is 100 milliseconds. */ + uint32_t tcp_fin_timer; + /* The flow aging timer for all UDP flows, the unit is 100 milliseconds. */ + uint32_t udp_flow_timer; + /* The interval to dma eem ejection data to host memory, the unit is milliseconds. */ + uint16_t eem_dma_interval; + /* The interval to notify driver to read the eem ejection data, the unit is milliseconds. */ + uint16_t eem_notice_interval; + /* The maximum entries number in the eem context memory. */ + uint32_t eem_ctx_max_entries; + /* The context memory ID for eem flow aging. */ + uint16_t eem_ctx_id; + uint16_t eem_ctx_mem_type; + /* The content of context memory is eem ejection data, the size of each entry is 4 bytes. */ + #define HWRM_CFA_FLOW_AGING_CFG_INPUT_EEM_CTX_MEM_TYPE_EJECTION_DATA \ + UINT32_C(0x0) + #define HWRM_CFA_FLOW_AGING_CFG_INPUT_EEM_CTX_MEM_TYPE_LAST \ + HWRM_CFA_FLOW_AGING_CFG_INPUT_EEM_CTX_MEM_TYPE_EJECTION_DATA + uint8_t unused_1[4]; +} __rte_packed; + +/* hwrm_cfa_flow_aging_cfg_output (size:128b/16B) */ +struct hwrm_cfa_flow_aging_cfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; /* - * This bit must be '1' for the t_l2_ivlan field to be - * configured. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN \ - UINT32_C(0x400) + uint8_t valid; +} __rte_packed; + +/**************************** + * hwrm_cfa_flow_aging_qcfg * + ****************************/ + + +/* hwrm_cfa_flow_aging_qcfg_input (size:192b/24B) */ +struct hwrm_cfa_flow_aging_qcfg_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * This bit must be '1' for the t_l2_ivlan_mask field to be - * configured. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN_MASK \ - UINT32_C(0x800) + uint16_t cmpl_ring; /* - * This bit must be '1' for the src_type field to be - * configured. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_TYPE \ - UINT32_C(0x1000) + uint16_t seq_id; /* - * This bit must be '1' for the src_id field to be - * configured. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_ID \ - UINT32_C(0x2000) + uint16_t target_id; /* - * This bit must be '1' for the tunnel_type field to be - * configured. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \ - UINT32_C(0x4000) + uint64_t resp_addr; + /* The direction for the flow aging configuration, 1 is rx path, 2 is tx path. */ + uint8_t flags; + /* Enumeration denoting the RX, TX type of the resource. */ + #define HWRM_CFA_FLOW_AGING_QCFG_INPUT_FLAGS_PATH UINT32_C(0x1) + /* tx path */ + #define HWRM_CFA_FLOW_AGING_QCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0) + /* rx path */ + #define HWRM_CFA_FLOW_AGING_QCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1) + #define HWRM_CFA_FLOW_AGING_QCFG_INPUT_FLAGS_PATH_LAST \ + HWRM_CFA_FLOW_AGING_QCFG_INPUT_FLAGS_PATH_RX + uint8_t unused_0[7]; +} __rte_packed; + +/* hwrm_cfa_flow_aging_qcfg_output (size:320b/40B) */ +struct hwrm_cfa_flow_aging_qcfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* The current flow aging timer for all TCP flows, the unit is 100 millisecond. */ + uint32_t tcp_flow_timer; + /* The current TCP finished timer for all TCP flows, the unit is 100 millisecond. */ + uint32_t tcp_fin_timer; + /* The current flow aging timer for all UDP flows, the unit is 100 millisecond. */ + uint32_t udp_flow_timer; + /* The interval to dma eem ejection data to host memory, the unit is milliseconds. */ + uint16_t eem_dma_interval; + /* The interval to notify driver to read the eem ejection data, the unit is milliseconds. */ + uint16_t eem_notice_interval; + /* The maximum entries number in the eem context memory. */ + uint32_t eem_ctx_max_entries; + /* The context memory ID for eem flow aging. */ + uint16_t eem_ctx_id; + /* The context memory type for eem flow aging. */ + uint16_t eem_ctx_mem_type; + uint8_t unused_0[7]; /* - * This bit must be '1' for the dst_id field to be - * configured. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_DST_ID \ - UINT32_C(0x8000) + uint8_t valid; +} __rte_packed; + +/***************************** + * hwrm_cfa_flow_aging_qcaps * + *****************************/ + + +/* hwrm_cfa_flow_aging_qcaps_input (size:192b/24B) */ +struct hwrm_cfa_flow_aging_qcaps_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * This bit must be '1' for the mirror_vnic_id field to be - * configured. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \ - UINT32_C(0x10000) + uint16_t cmpl_ring; /* - * This value sets the match value for the L2 MAC address. - * Destination MAC address for RX path. - * Source MAC address for TX path. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - uint8_t l2_addr[6]; - uint8_t unused_0[2]; + uint16_t seq_id; /* - * This value sets the mask value for the L2 address. - * A value of 0 will mask the corresponding bit from - * compare. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - uint8_t l2_addr_mask[6]; - /* This value sets VLAN ID value for outer VLAN. */ - uint16_t l2_ovlan; + uint16_t target_id; /* - * This value sets the mask value for the ovlan id. - * A value of 0 will mask the corresponding bit from - * compare. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - uint16_t l2_ovlan_mask; - /* This value sets VLAN ID value for inner VLAN. */ - uint16_t l2_ivlan; + uint64_t resp_addr; + /* The direction for the flow aging configuration, 1 is rx path, 2 is tx path. */ + uint8_t flags; + /* Enumeration denoting the RX, TX type of the resource. */ + #define HWRM_CFA_FLOW_AGING_QCAPS_INPUT_FLAGS_PATH UINT32_C(0x1) + /* tx path */ + #define HWRM_CFA_FLOW_AGING_QCAPS_INPUT_FLAGS_PATH_TX UINT32_C(0x0) + /* rx path */ + #define HWRM_CFA_FLOW_AGING_QCAPS_INPUT_FLAGS_PATH_RX UINT32_C(0x1) + #define HWRM_CFA_FLOW_AGING_QCAPS_INPUT_FLAGS_PATH_LAST \ + HWRM_CFA_FLOW_AGING_QCAPS_INPUT_FLAGS_PATH_RX + uint8_t unused_0[7]; +} __rte_packed; + +/* hwrm_cfa_flow_aging_qcaps_output (size:256b/32B) */ +struct hwrm_cfa_flow_aging_qcaps_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* The maximum flow aging timer for all TCP flows, the unit is 100 millisecond. */ + uint32_t max_tcp_flow_timer; + /* The maximum TCP finished timer for all TCP flows, the unit is 100 millisecond. */ + uint32_t max_tcp_fin_timer; + /* The maximum flow aging timer for all UDP flows, the unit is 100 millisecond. */ + uint32_t max_udp_flow_timer; + /* The maximum aging flows that HW can support. */ + uint32_t max_aging_flows; + uint8_t unused_0[7]; /* - * This value sets the mask value for the ivlan id. - * A value of 0 will mask the corresponding bit from - * compare. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - uint16_t l2_ivlan_mask; - uint8_t unused_1[2]; + uint8_t valid; +} __rte_packed; + +/********************************** + * hwrm_cfa_tcp_flag_process_qcfg * + **********************************/ + + +/* hwrm_cfa_tcp_flag_process_qcfg_input (size:128b/16B) */ +struct hwrm_cfa_tcp_flag_process_qcfg_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * This value sets the match value for the tunnel - * L2 MAC address. - * Destination MAC address for RX path. - * Source MAC address for TX path. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - uint8_t t_l2_addr[6]; - uint8_t unused_2[2]; + uint16_t cmpl_ring; /* - * This value sets the mask value for the tunnel L2 - * address. - * A value of 0 will mask the corresponding bit from - * compare. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - uint8_t t_l2_addr_mask[6]; - /* This value sets VLAN ID value for tunnel outer VLAN. */ - uint16_t t_l2_ovlan; + uint16_t seq_id; /* - * This value sets the mask value for the tunnel ovlan id. - * A value of 0 will mask the corresponding bit from - * compare. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - uint16_t t_l2_ovlan_mask; - /* This value sets VLAN ID value for tunnel inner VLAN. */ - uint16_t t_l2_ivlan; + uint16_t target_id; /* - * This value sets the mask value for the tunnel ivlan id. - * A value of 0 will mask the corresponding bit from - * compare. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - uint16_t t_l2_ivlan_mask; - /* This value identifies the type of source of the packet. */ - uint8_t src_type; - /* Network port */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_NPORT UINT32_C(0x0) - /* Physical function */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_PF UINT32_C(0x1) - /* Virtual function */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VF UINT32_C(0x2) - /* Virtual NIC of a function */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VNIC UINT32_C(0x3) - /* Embedded processor for CFA management */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_KONG UINT32_C(0x4) - /* Embedded processor for OOB management */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_APE UINT32_C(0x5) - /* Embedded processor for RoCE */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_BONO UINT32_C(0x6) - /* Embedded processor for network proxy functions */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_TANG UINT32_C(0x7) - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_LAST \ - HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_TANG - uint8_t unused_3; - /* - * This value is the id of the source. - * For a network port, it represents port_id. - * For a physical function, it represents fid. - * For a virtual function, it represents vf_id. - * For a vnic, it represents vnic_id. - * For embedded processors, this id is not valid. - * - * Notes: - * 1. The function ID is implied if it src_id is - * not provided for a src_type that is either + uint64_t resp_addr; +} __rte_packed; + +/* hwrm_cfa_tcp_flag_process_qcfg_output (size:192b/24B) */ +struct hwrm_cfa_tcp_flag_process_qcfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* The port 0 RX mirror action record ID. */ + uint16_t rx_ar_id_port0; + /* The port 1 RX mirror action record ID. */ + uint16_t rx_ar_id_port1; + /* The port 0 RX action record ID for TX TCP flag packets from loopback path. */ + uint16_t tx_ar_id_port0; + /* The port 1 RX action record ID for TX TCP flag packets from loopback path. */ + uint16_t tx_ar_id_port1; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - uint32_t src_id; - /* Tunnel Type. */ - uint8_t tunnel_type; - /* Non-tunnel */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \ - UINT32_C(0x0) - /* Virtual eXtensible Local Area Network (VXLAN) */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \ - UINT32_C(0x1) - /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \ - UINT32_C(0x2) - /* Generic Routing Encapsulation (GRE) inside Ethernet payload */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \ - UINT32_C(0x3) - /* IP in IP */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \ - UINT32_C(0x4) - /* Generic Network Virtualization Encapsulation (Geneve) */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \ - UINT32_C(0x5) - /* Multi-Protocol Lable Switching (MPLS) */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \ - UINT32_C(0x6) - /* Stateless Transport Tunnel (STT) */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \ - UINT32_C(0x7) - /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \ - UINT32_C(0x8) - /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \ - UINT32_C(0x9) - /* Any tunneled traffic */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \ - UINT32_C(0xff) - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_LAST \ - HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL - uint8_t unused_4; + uint8_t valid; +} __rte_packed; + +/********************** + * hwrm_cfa_pair_info * + **********************/ + + +/* hwrm_cfa_pair_info_input (size:448b/56B) */ +struct hwrm_cfa_pair_info_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * If set, this value shall represent the - * Logical VNIC ID of the destination VNIC for the RX - * path and network port id of the destination port for - * the TX path. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - uint16_t dst_id; + uint16_t cmpl_ring; /* - * Logical VNIC ID of the VNIC where traffic is - * mirrored. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - uint16_t mirror_vnic_id; + uint16_t seq_id; /* - * This hint is provided to help in placing - * the filter in the filter table. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - uint8_t pri_hint; - /* No preference */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_NO_PREFER \ - UINT32_C(0x0) - /* Above the given filter */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_ABOVE_FILTER \ - UINT32_C(0x1) - /* Below the given filter */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_BELOW_FILTER \ - UINT32_C(0x2) - /* As high as possible */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MAX \ - UINT32_C(0x3) - /* As low as possible */ - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MIN \ - UINT32_C(0x4) - #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_LAST \ - HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MIN - uint8_t unused_5; - uint32_t unused_6; + uint16_t target_id; /* - * This is the ID of the filter that goes along with - * the pri_hint. - * - * This field is valid only for the following values. - * 1 - Above the given filter - * 2 - Below the given filter + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - uint64_t l2_filter_id_hint; -} __attribute__((packed)); + uint64_t resp_addr; + uint32_t flags; + /* If this flag is set, lookup by name else lookup by index. */ + #define HWRM_CFA_PAIR_INFO_INPUT_FLAGS_LOOKUP_TYPE UINT32_C(0x1) + /* If this flag is set, lookup by PF id and VF id. */ + #define HWRM_CFA_PAIR_INFO_INPUT_FLAGS_LOOKUP_REPRE UINT32_C(0x2) + /* Pair table index. */ + uint16_t pair_index; + /* Pair pf index. */ + uint8_t pair_pfid; + /* Pair vf index. */ + uint8_t pair_vfid; + /* Pair name (32 byte string). */ + char pair_name[32]; +} __rte_packed; -/* hwrm_cfa_l2_filter_alloc_output (size:192b/24B) */ -struct hwrm_cfa_l2_filter_alloc_output { +/* hwrm_cfa_pair_info_output (size:576b/72B) */ +struct hwrm_cfa_pair_info_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -21144,19 +35066,128 @@ struct hwrm_cfa_l2_filter_alloc_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; + /* Pair table index. */ + uint16_t next_pair_index; + /* Pair member a's fid. */ + uint16_t a_fid; + /* Logical host number. */ + uint8_t host_a_index; + /* Logical PF number. */ + uint8_t pf_a_index; + /* Pair member a's Linux logical VF number. */ + uint16_t vf_a_index; + /* Rx CFA code. */ + uint16_t rx_cfa_code_a; + /* Tx CFA action. */ + uint16_t tx_cfa_action_a; + /* Pair member b's fid. */ + uint16_t b_fid; + /* Logical host number. */ + uint8_t host_b_index; + /* Logical PF number. */ + uint8_t pf_b_index; + /* Pair member a's Linux logical VF number. */ + uint16_t vf_b_index; + /* Rx CFA code. */ + uint16_t rx_cfa_code_b; + /* Tx CFA action. */ + uint16_t tx_cfa_action_b; + /* Pair mode (0-vf2fn, 1-rep2fn, 2-rep2rep, 3-proxy, 4-pfpair). */ + uint8_t pair_mode; + /* Pair between VF on local host with PF or VF on specified host. */ + #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_VF2FN UINT32_C(0x0) + /* Pair between REP on local host with PF or VF on specified host. */ + #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_REP2FN UINT32_C(0x1) + /* Pair between REP on local host with REP on specified host. */ + #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_REP2REP UINT32_C(0x2) + /* Pair for the proxy interface. */ + #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_PROXY UINT32_C(0x3) + /* Pair for the PF interface. */ + #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_PFPAIR UINT32_C(0x4) + #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_LAST \ + HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_PFPAIR + /* Pair state. */ + uint8_t pair_state; + /* Pair has been allocated */ + #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_ALLOCATED UINT32_C(0x1) + /* Both pair members are active */ + #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_ACTIVE UINT32_C(0x2) + #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_LAST \ + HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_ACTIVE + /* Pair name (32 byte string). */ + char pair_name[32]; + uint8_t unused_0[7]; /* - * This value identifies a set of CFA data structures used for an L2 - * context. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - uint64_t l2_filter_id; + uint8_t valid; +} __rte_packed; + +/********************** + * hwrm_cfa_vfr_alloc * + **********************/ + + +/* hwrm_cfa_vfr_alloc_input (size:448b/56B) */ +struct hwrm_cfa_vfr_alloc_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * This is the ID of the flow associated with this - * filter. - * This value shall be used to match and associate the - * flow identifier returned in completion records. - * A value of 0xFFFFFFFF shall indicate no flow id. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - uint32_t flow_id; + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* Logical VF number (range: 0 -> MAX_VFS -1). */ + uint16_t vf_id; + /* + * This field is reserved for the future use. + * It shall be set to 0. + */ + uint16_t reserved; + uint8_t unused_0[4]; + /* VF Representor name (32 byte string). */ + char vfr_name[32]; +} __rte_packed; + +/* hwrm_cfa_vfr_alloc_output (size:128b/16B) */ +struct hwrm_cfa_vfr_alloc_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* Rx CFA code. */ + uint16_t rx_cfa_code; + /* Tx CFA action. */ + uint16_t tx_cfa_action; uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output @@ -21166,15 +35197,15 @@ struct hwrm_cfa_l2_filter_alloc_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/*************************** - * hwrm_cfa_l2_filter_free * - ***************************/ +/********************* + * hwrm_cfa_vfr_free * + *********************/ -/* hwrm_cfa_l2_filter_free_input (size:192b/24B) */ -struct hwrm_cfa_l2_filter_free_input { +/* hwrm_cfa_vfr_free_input (size:448b/56B) */ +struct hwrm_cfa_vfr_free_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -21191,7 +35222,8 @@ struct hwrm_cfa_l2_filter_free_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -21202,15 +35234,16 @@ struct hwrm_cfa_l2_filter_free_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* - * This value identifies a set of CFA data structures used for an L2 - * context. - */ - uint64_t l2_filter_id; -} __attribute__((packed)); + /* VF Representor name (32 byte string). */ + char vfr_name[32]; + /* Logical VF number (range: 0 -> MAX_VFS -1). */ + uint16_t vf_id; + uint16_t reserved; + uint8_t unused_0[4]; +} __rte_packed; -/* hwrm_cfa_l2_filter_free_output (size:128b/16B) */ -struct hwrm_cfa_l2_filter_free_output { +/* hwrm_cfa_vfr_free_output (size:128b/16B) */ +struct hwrm_cfa_vfr_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -21228,15 +35261,17 @@ struct hwrm_cfa_l2_filter_free_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/************************** - * hwrm_cfa_l2_filter_cfg * - **************************/ -/* hwrm_cfa_l2_filter_cfg_input (size:320b/40B) */ -struct hwrm_cfa_l2_filter_cfg_input { +/*************************************** + * hwrm_cfa_redirect_query_tunnel_type * + ***************************************/ + + +/* hwrm_cfa_redirect_query_tunnel_type_input (size:192b/24B) */ +struct hwrm_cfa_redirect_query_tunnel_type_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -21253,7 +35288,8 @@ struct hwrm_cfa_l2_filter_cfg_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -21264,80 +35300,13 @@ struct hwrm_cfa_l2_filter_cfg_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - uint32_t flags; - /* - * Enumeration denoting the RX, TX type of the resource. - * This enumeration is used for resources that are similar for both - * TX and RX paths of the chip. - */ - #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH \ - UINT32_C(0x1) - /* tx path */ - #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_TX \ - UINT32_C(0x0) - /* rx path */ - #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX \ - UINT32_C(0x1) - #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_LAST \ - HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX - /* - * Setting of this flag indicates drop action. If this flag is not set, - * then it should be considered accept action. - */ - #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_DROP \ - UINT32_C(0x2) - /* - * Enumeration denoting NO_ROCE_L2 to support old drivers. - * New driver L2 for only L2 traffic, ROCE for roce and l2 traffic - */ - #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_MASK \ - UINT32_C(0xc) - #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_SFT 2 - /* To support old drivers */ - #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_NO_ROCE_L2 \ - (UINT32_C(0x0) << 2) - /* Only L2 traffic */ - #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_L2 \ - (UINT32_C(0x1) << 2) - /* Roce & L2 traffic */ - #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_ROCE \ - (UINT32_C(0x2) << 2) - #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_LAST \ - HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_ROCE - uint32_t enables; - /* - * This bit must be '1' for the dst_id field to be - * configured. - */ - #define HWRM_CFA_L2_FILTER_CFG_INPUT_ENABLES_DST_ID \ - UINT32_C(0x1) - /* - * This bit must be '1' for the new_mirror_vnic_id field to be - * configured. - */ - #define HWRM_CFA_L2_FILTER_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID \ - UINT32_C(0x2) - /* - * This value identifies a set of CFA data structures used for an L2 - * context. - */ - uint64_t l2_filter_id; - /* - * If set, this value shall represent the - * Logical VNIC ID of the destination VNIC for the RX - * path and network port id of the destination port for - * the TX path. - */ - uint32_t dst_id; - /* - * New Logical VNIC ID of the VNIC where traffic is - * mirrored. - */ - uint32_t new_mirror_vnic_id; -} __attribute__((packed)); + /* The source function id. */ + uint16_t src_fid; + uint8_t unused_0[6]; +} __rte_packed; -/* hwrm_cfa_l2_filter_cfg_output (size:128b/16B) */ -struct hwrm_cfa_l2_filter_cfg_output { +/* hwrm_cfa_redirect_query_tunnel_type_output (size:128b/16B) */ +struct hwrm_cfa_redirect_query_tunnel_type_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -21346,24 +35315,68 @@ struct hwrm_cfa_l2_filter_cfg_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - uint8_t unused_0[7]; + /* Tunnel Mask. */ + uint32_t tunnel_mask; + /* Non-tunnel */ + #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_NONTUNNEL \ + UINT32_C(0x1) + /* Virtual eXtensible Local Area Network (VXLAN) */ + #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_VXLAN \ + UINT32_C(0x2) + /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ + #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_NVGRE \ + UINT32_C(0x4) + /* Generic Routing Encapsulation (GRE) inside Ethernet payload */ + #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_L2GRE \ + UINT32_C(0x8) + /* IP in IP */ + #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_IPIP \ + UINT32_C(0x10) + /* Generic Network Virtualization Encapsulation (Geneve) */ + #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_GENEVE \ + UINT32_C(0x20) + /* Multi-Protocol Label Switching (MPLS) */ + #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_MPLS \ + UINT32_C(0x40) + /* Stateless Transport Tunnel (STT) */ + #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_STT \ + UINT32_C(0x80) + /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ + #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_IPGRE \ + UINT32_C(0x100) + /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ + #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_VXLAN_V4 \ + UINT32_C(0x200) + /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ + #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_IPGRE_V1 \ + UINT32_C(0x400) + /* Any tunneled traffic */ + #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_ANYTUNNEL \ + UINT32_C(0x800) + /* Use fixed layer 2 ether type of 0xFFFF */ + #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_L2_ETYPE \ + UINT32_C(0x1000) + /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */ + #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_VXLAN_GPE_V6 \ + UINT32_C(0x2000) + uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/*************************** - * hwrm_cfa_l2_set_rx_mask * - ***************************/ +/************************* + * hwrm_cfa_ctx_mem_rgtr * + *************************/ -/* hwrm_cfa_l2_set_rx_mask_input (size:448b/56B) */ -struct hwrm_cfa_l2_set_rx_mask_input { +/* hwrm_cfa_ctx_mem_rgtr_input (size:256b/32B) */ +struct hwrm_cfa_ctx_mem_rgtr_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -21380,7 +35393,8 @@ struct hwrm_cfa_l2_set_rx_mask_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -21391,134 +35405,113 @@ struct hwrm_cfa_l2_set_rx_mask_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* VNIC ID */ - uint32_t vnic_id; - uint32_t mask; - /* - * When this bit is '1', the function is requested to accept - * multi-cast packets specified by the multicast addr table. - */ - #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_MCAST \ - UINT32_C(0x2) - /* - * When this bit is '1', the function is requested to accept - * all multi-cast packets. - */ - #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ALL_MCAST \ - UINT32_C(0x4) - /* - * When this bit is '1', the function is requested to accept - * broadcast packets. - */ - #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_BCAST \ - UINT32_C(0x8) - /* - * When this bit is '1', the function is requested to be - * put in the promiscuous mode. - * - * The HWRM should accept any function to set up - * promiscuous mode. - * - * The HWRM shall follow the semantics below for the - * promiscuous mode support. - * # When partitioning is not enabled on a port - * (i.e. single PF on the port), then the PF shall - * be allowed to be in the promiscuous mode. When the - * PF is in the promiscuous mode, then it shall - * receive all host bound traffic on that port. - * # When partitioning is enabled on a port - * (i.e. multiple PFs per port) and a PF on that - * port is in the promiscuous mode, then the PF - * receives all traffic within that partition as - * identified by a unique identifier for the - * PF (e.g. S-Tag). If a unique outer VLAN - * for the PF is specified, then the setting of - * promiscuous mode on that PF shall result in the - * PF receiving all host bound traffic with matching - * outer VLAN. - * # A VF shall can be set in the promiscuous mode. - * In the promiscuous mode, the VF does not receive any - * traffic unless a unique outer VLAN for the - * VF is specified. If a unique outer VLAN - * for the VF is specified, then the setting of - * promiscuous mode on that VF shall result in the - * VF receiving all host bound traffic with the - * matching outer VLAN. - * # The HWRM shall allow the setting of promiscuous - * mode on a function independently from the - * promiscuous mode settings on other functions. - */ - #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_PROMISCUOUS \ - UINT32_C(0x10) - /* - * If this flag is set, the corresponding RX - * filters shall be set up to cover multicast/broadcast - * filters for the outermost Layer 2 destination MAC - * address field. - */ - #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_OUTERMOST \ - UINT32_C(0x20) + uint16_t flags; + /* Counter PBL indirect levels. */ + uint8_t page_level; + /* PBL pointer is physical start address. */ + #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2) + #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LAST \ + HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_2 + /* Page size. */ + uint8_t page_size; + /* 4KB page size. */ + #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_4K UINT32_C(0x0) + /* 8KB page size. */ + #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_8K UINT32_C(0x1) + /* 64KB page size. */ + #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_64K UINT32_C(0x4) + /* 256KB page size. */ + #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_256K UINT32_C(0x6) + /* 1MB page size. */ + #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_1M UINT32_C(0x8) + /* 2MB page size. */ + #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_2M UINT32_C(0x9) + /* 4MB page size. */ + #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_4M UINT32_C(0xa) + /* 1GB page size. */ + #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_1G UINT32_C(0x12) + #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_LAST \ + HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_1G + uint32_t unused_0; + /* Pointer to the PBL, or PDL depending on number of levels */ + uint64_t page_dir; +} __rte_packed; + +/* hwrm_cfa_ctx_mem_rgtr_output (size:128b/16B) */ +struct hwrm_cfa_ctx_mem_rgtr_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; /* - * If this flag is set, the corresponding RX - * filters shall be set up to cover multicast/broadcast - * filters for the VLAN-tagged packets that match the - * TPID and VID fields of VLAN tags in the VLAN tag - * table specified in this command. + * Id/Handle to the recently register context memory. This handle is passed + * to the CFA feature. */ - #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLANONLY \ - UINT32_C(0x40) + uint16_t ctx_id; + uint8_t unused_0[5]; /* - * If this flag is set, the corresponding RX - * filters shall be set up to cover multicast/broadcast - * filters for non-VLAN tagged packets and VLAN-tagged - * packets that match the TPID and VID fields of VLAN - * tags in the VLAN tag table specified in this command. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLAN_NONVLAN \ - UINT32_C(0x80) - /* - * If this flag is set, the corresponding RX - * filters shall be set up to cover multicast/broadcast - * filters for non-VLAN tagged packets and VLAN-tagged - * packets matching any VLAN tag. - * - * If this flag is set, then the HWRM shall ignore - * VLAN tags specified in vlan_tag_tbl. - * - * If none of vlanonly, vlan_nonvlan, and anyvlan_nonvlan - * flags is set, then the HWRM shall ignore - * VLAN tags specified in vlan_tag_tbl. - * - * The HWRM client shall set at most one flag out of - * vlanonly, vlan_nonvlan, and anyvlan_nonvlan. + uint8_t valid; +} __rte_packed; + +/*************************** + * hwrm_cfa_ctx_mem_unrgtr * + ***************************/ + + +/* hwrm_cfa_ctx_mem_unrgtr_input (size:192b/24B) */ +struct hwrm_cfa_ctx_mem_unrgtr_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ANYVLAN_NONVLAN \ - UINT32_C(0x100) - /* This is the address for mcast address tbl. */ - uint64_t mc_tbl_addr; + uint16_t cmpl_ring; /* - * This value indicates how many entries in mc_tbl are valid. - * Each entry is 6 bytes. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - uint32_t num_mc_entries; - uint8_t unused_0[4]; + uint16_t seq_id; /* - * This is the address for VLAN tag table. - * Each VLAN entry in the table is 4 bytes of a VLAN tag - * including TPID, PCP, DEI, and VID fields in network byte - * order. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - uint64_t vlan_tag_tbl_addr; + uint16_t target_id; /* - * This value indicates how many entries in vlan_tag_tbl are - * valid. Each entry is 4 bytes. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - uint32_t num_vlan_tags; - uint8_t unused_1[4]; -} __attribute__((packed)); + uint64_t resp_addr; + /* + * Id/Handle to the recently register context memory. This handle is passed + * to the CFA feature. + */ + uint16_t ctx_id; + uint8_t unused_0[6]; +} __rte_packed; -/* hwrm_cfa_l2_set_rx_mask_output (size:128b/16B) */ -struct hwrm_cfa_l2_set_rx_mask_output { +/* hwrm_cfa_ctx_mem_unrgtr_output (size:128b/16B) */ +struct hwrm_cfa_ctx_mem_unrgtr_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -21530,39 +35523,21 @@ struct hwrm_cfa_l2_set_rx_mask_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); - -/* hwrm_cfa_l2_set_rx_mask_cmd_err (size:64b/8B) */ -struct hwrm_cfa_l2_set_rx_mask_cmd_err { - /* - * command specific error codes that goes to - * the cmd_err field in Common HWRM Error Response. - */ - uint8_t code; - /* Unknown error */ - #define HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_UNKNOWN \ - UINT32_C(0x0) - /* Unable to complete operation due to conflict with Ntuple Filter */ - #define HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_NTUPLE_FILTER_CONFLICT_ERR \ - UINT32_C(0x1) - #define HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_LAST \ - HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_NTUPLE_FILTER_CONFLICT_ERR - uint8_t unused_0[7]; -} __attribute__((packed)); +} __rte_packed; -/******************************* - * hwrm_cfa_vlan_antispoof_cfg * - *******************************/ +/************************* + * hwrm_cfa_ctx_mem_qctx * + *************************/ -/* hwrm_cfa_vlan_antispoof_cfg_input (size:256b/32B) */ -struct hwrm_cfa_vlan_antispoof_cfg_input { +/* hwrm_cfa_ctx_mem_qctx_input (size:192b/24B) */ +struct hwrm_cfa_ctx_mem_qctx_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -21579,7 +35554,8 @@ struct hwrm_cfa_vlan_antispoof_cfg_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -21591,26 +35567,15 @@ struct hwrm_cfa_vlan_antispoof_cfg_input { */ uint64_t resp_addr; /* - * Function ID of the function that is being configured. - * Only valid for a VF FID configured by the PF. - */ - uint16_t fid; - uint8_t unused_0[2]; - /* Number of VLAN entries in the vlan_tag_mask_tbl. */ - uint32_t num_vlan_entries; - /* - * The vlan_tag_mask_tbl_addr is the DMA address of the VLAN - * antispoof table. Each table entry contains the 16-bit TPID - * (0x8100 or 0x88a8 only), 16-bit VLAN ID, and a 16-bit mask, - * all in network order to match hwrm_cfa_l2_set_rx_mask. - * For an individual VLAN entry, the mask value should be 0xfff - * for the 12-bit VLAN ID. + * Id/Handle to the recently register context memory. This handle is passed + * to the CFA feature. */ - uint64_t vlan_tag_mask_tbl_addr; -} __attribute__((packed)); + uint16_t ctx_id; + uint8_t unused_0[6]; +} __rte_packed; -/* hwrm_cfa_vlan_antispoof_cfg_output (size:128b/16B) */ -struct hwrm_cfa_vlan_antispoof_cfg_output { +/* hwrm_cfa_ctx_mem_qctx_output (size:256b/32B) */ +struct hwrm_cfa_ctx_mem_qctx_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -21619,24 +35584,58 @@ struct hwrm_cfa_vlan_antispoof_cfg_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - uint8_t unused_0[7]; + uint16_t flags; + /* Counter PBL indirect levels. */ + uint8_t page_level; + /* PBL pointer is physical start address. */ + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2) + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LAST \ + HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_2 + /* Page size. */ + uint8_t page_size; + /* 4KB page size. */ + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_4K UINT32_C(0x0) + /* 8KB page size. */ + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_8K UINT32_C(0x1) + /* 64KB page size. */ + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_64K UINT32_C(0x4) + /* 256KB page size. */ + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_256K UINT32_C(0x6) + /* 1MB page size. */ + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_1M UINT32_C(0x8) + /* 2MB page size. */ + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_2M UINT32_C(0x9) + /* 4MB page size. */ + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_4M UINT32_C(0xa) + /* 1GB page size. */ + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_1G UINT32_C(0x12) + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_LAST \ + HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_1G + uint8_t unused_0[4]; + /* Pointer to the PBL, or PDL depending on number of levels */ + uint64_t page_dir; + uint8_t unused_1[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/******************************** - * hwrm_cfa_vlan_antispoof_qcfg * - ********************************/ +/************************** + * hwrm_cfa_ctx_mem_qcaps * + **************************/ -/* hwrm_cfa_vlan_antispoof_qcfg_input (size:256b/32B) */ -struct hwrm_cfa_vlan_antispoof_qcfg_input { +/* hwrm_cfa_ctx_mem_qcaps_input (size:128b/16B) */ +struct hwrm_cfa_ctx_mem_qcaps_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -21653,7 +35652,8 @@ struct hwrm_cfa_vlan_antispoof_qcfg_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -21664,30 +35664,10 @@ struct hwrm_cfa_vlan_antispoof_qcfg_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* - * Function ID of the function that is being queried. - * Only valid for a VF FID queried by the PF. - */ - uint16_t fid; - uint8_t unused_0[2]; - /* - * Maximum number of VLAN entries the firmware is allowed to DMA - * to vlan_tag_mask_tbl. - */ - uint32_t max_vlan_entries; - /* - * The vlan_tag_mask_tbl_addr is the DMA address of the VLAN - * antispoof table to which firmware will DMA to. Each table - * entry will contain the 16-bit TPID (0x8100 or 0x88a8 only), - * 16-bit VLAN ID, and a 16-bit mask, all in network order to - * match hwrm_cfa_l2_set_rx_mask. For an individual VLAN entry, - * the mask value should be 0xfff for the 12-bit VLAN ID. - */ - uint64_t vlan_tag_mask_tbl_addr; -} __attribute__((packed)); +} __rte_packed; -/* hwrm_cfa_vlan_antispoof_qcfg_output (size:128b/16B) */ -struct hwrm_cfa_vlan_antispoof_qcfg_output { +/* hwrm_cfa_ctx_mem_qcaps_output (size:128b/16B) */ +struct hwrm_cfa_ctx_mem_qcaps_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -21696,26 +35676,26 @@ struct hwrm_cfa_vlan_antispoof_qcfg_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* Number of valid entries DMAd by firmware to vlan_tag_mask_tbl. */ - uint32_t num_vlan_entries; - uint8_t unused_0[3]; + /* Indicates the maximum number of context memory which can be registered. */ + uint16_t max_entries; + uint8_t unused_0[5]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/******************************** - * hwrm_cfa_tunnel_filter_alloc * - ********************************/ +/********************** + * hwrm_cfa_eem_qcaps * + **********************/ -/* hwrm_cfa_tunnel_filter_alloc_input (size:704b/88B) */ -struct hwrm_cfa_tunnel_filter_alloc_input { +/* hwrm_cfa_eem_qcaps_input (size:192b/24B) */ +struct hwrm_cfa_eem_qcaps_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -21732,7 +35712,8 @@ struct hwrm_cfa_tunnel_filter_alloc_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -21744,210 +35725,276 @@ struct hwrm_cfa_tunnel_filter_alloc_input { */ uint64_t resp_addr; uint32_t flags; - /* Setting of this flag indicates the applicability to the loopback path. */ - #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK \ - UINT32_C(0x1) - uint32_t enables; /* - * This bit must be '1' for the l2_filter_id field to be - * configured. + * When set to 1, indicates the configuration will apply to TX flows + * which are to be offloaded. + * Note if this bit is set then the path_rx bit can't be set. */ - #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L2_FILTER_ID \ + #define HWRM_CFA_EEM_QCAPS_INPUT_FLAGS_PATH_TX \ UINT32_C(0x1) /* - * This bit must be '1' for the l2_addr field to be - * configured. + * When set to 1, indicates the configuration will apply to RX flows + * which are to be offloaded. + * Note if this bit is set then the path_tx bit can't be set. */ - #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR \ + #define HWRM_CFA_EEM_QCAPS_INPUT_FLAGS_PATH_RX \ UINT32_C(0x2) - /* - * This bit must be '1' for the l2_ivlan field to be - * configured. - */ - #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN \ + /* When set to 1, all offloaded flows will be sent to EEM. */ + #define HWRM_CFA_EEM_QCAPS_INPUT_FLAGS_PREFERRED_OFFLOAD \ UINT32_C(0x4) + uint32_t unused_0; +} __rte_packed; + +/* hwrm_cfa_eem_qcaps_output (size:320b/40B) */ +struct hwrm_cfa_eem_qcaps_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint32_t flags; /* - * This bit must be '1' for the l3_addr field to be - * configured. + * When set to 1, indicates the configuration will apply to TX flows + * which are to be offloaded. + * Note if this bit is set then the path_rx bit can't be set. */ - #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L3_ADDR \ - UINT32_C(0x8) + #define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_PATH_TX \ + UINT32_C(0x1) /* - * This bit must be '1' for the l3_addr_type field to be - * configured. + * When set to 1, indicates the configuration will apply to RX flows + * which are to be offloaded. + * Note if this bit is set then the path_tx bit can't be set. */ - #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L3_ADDR_TYPE \ - UINT32_C(0x10) + #define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_PATH_RX \ + UINT32_C(0x2) /* - * This bit must be '1' for the t_l3_addr_type field to be - * configured. + * When set to 1, indicates the the FW supports the Centralized + * Memory Model. The concept designates one entity for the + * memory allocation while all others ‘subscribe’ to it. */ - #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_T_L3_ADDR_TYPE \ - UINT32_C(0x20) + #define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_CENTRALIZED_MEMORY_MODEL_SUPPORTED \ + UINT32_C(0x4) /* - * This bit must be '1' for the t_l3_addr field to be - * configured. + * When set to 1, indicates the the FW supports the Detached + * Centralized Memory Model. The memory is allocated and managed + * as a separate entity. All PFs and VFs will be granted direct + * or semi-direct access to the allocated memory while none of + * which can interfere with the management of the memory. */ - #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_T_L3_ADDR \ - UINT32_C(0x40) + #define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_DETACHED_CENTRALIZED_MEMORY_MODEL_SUPPORTED \ + UINT32_C(0x8) + uint32_t unused_0; + uint32_t supported; /* - * This bit must be '1' for the tunnel_type field to be - * configured. + * If set to 1, then EEM KEY0 table is supported using crc32 hash. + * If set to 0, EEM KEY0 table is not supported. */ - #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \ - UINT32_C(0x80) + #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_KEY0_TABLE \ + UINT32_C(0x1) /* - * This bit must be '1' for the vni field to be - * configured. + * If set to 1, then EEM KEY1 table is supported using lookup3 hash. + * If set to 0, EEM KEY1 table is not supported. */ - #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_VNI \ - UINT32_C(0x100) + #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_KEY1_TABLE \ + UINT32_C(0x2) /* - * This bit must be '1' for the dst_vnic_id field to be - * configured. + * If set to 1, then EEM External Record table is supported. + * If set to 0, EEM External Record table is not supported. + * (This table includes action record, EFC pointers, encap pointers) */ - #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_DST_VNIC_ID \ - UINT32_C(0x200) + #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_EXTERNAL_RECORD_TABLE \ + UINT32_C(0x4) /* - * This bit must be '1' for the mirror_vnic_id field to be - * configured. + * If set to 1, then EEM External Flow Counters table is supported. + * If set to 0, EEM External Flow Counters table is not supported. */ - #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \ - UINT32_C(0x400) + #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_EXTERNAL_FLOW_COUNTERS_TABLE \ + UINT32_C(0x8) /* - * This value identifies a set of CFA data structures used for an L2 - * context. + * If set to 1, then FID table used for implicit flow flush is supported. + * If set to 0, then FID table used for implicit flow flush is not supported. */ - uint64_t l2_filter_id; + #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_FID_TABLE \ + UINT32_C(0x10) /* - * This value sets the match value for the inner L2 - * MAC address. - * Destination MAC address for RX path. - * Source MAC address for TX path. + * The maximum number of entries supported by EEM. When configuring the host memory + * the number of numbers of entries that can supported are - + * 32k, 64k 128k, 256k, 512k, 1M, 2M, 4M, 8M, 32M, 64M, 128M entries. + * Any value that are not these values, the FW will round down to the closest support + * number of entries. + */ + uint32_t max_entries_supported; + /* The entry size in bytes of each entry in the EEM KEY0/KEY1 tables. */ + uint16_t key_entry_size; + /* The entry size in bytes of each entry in the EEM RECORD tables. */ + uint16_t record_entry_size; + /* The entry size in bytes of each entry in the EEM EFC tables. */ + uint16_t efc_entry_size; + /* The FID size in bytes of each entry in the EEM FID tables. */ + uint16_t fid_entry_size; + uint8_t unused_1[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - uint8_t l2_addr[6]; + uint8_t valid; +} __rte_packed; + +/******************** + * hwrm_cfa_eem_cfg * + ********************/ + + +/* hwrm_cfa_eem_cfg_input (size:384b/48B) */ +struct hwrm_cfa_eem_cfg_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * This value sets VLAN ID value for inner VLAN. - * Only 12-bits of VLAN ID are used in setting the filter. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - uint16_t l2_ivlan; + uint16_t cmpl_ring; /* - * The value of inner destination IP address to be used in filtering. - * For IPv4, first four bytes represent the IP address. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - uint32_t l3_addr[4]; + uint16_t seq_id; /* - * The value of tunnel destination IP address to be used in filtering. - * For IPv4, first four bytes represent the IP address. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - uint32_t t_l3_addr[4]; + uint16_t target_id; /* - * This value indicates the type of inner IP address. - * 4 - IPv4 - * 6 - IPv6 - * All others are invalid. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - uint8_t l3_addr_type; + uint64_t resp_addr; + uint32_t flags; /* - * This value indicates the type of tunnel IP address. - * 4 - IPv4 - * 6 - IPv6 - * All others are invalid. + * When set to 1, indicates the configuration will apply to TX flows + * which are to be offloaded. + * Note if this bit is set then the path_rx bit can't be set. */ - uint8_t t_l3_addr_type; - /* Tunnel Type. */ - uint8_t tunnel_type; - /* Non-tunnel */ - #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \ - UINT32_C(0x0) - /* Virtual eXtensible Local Area Network (VXLAN) */ - #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \ + #define HWRM_CFA_EEM_CFG_INPUT_FLAGS_PATH_TX \ UINT32_C(0x1) - /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ - #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \ + /* + * When set to 1, indicates the configuration will apply to RX flows + * which are to be offloaded. + * Note if this bit is set then the path_tx bit can't be set. + */ + #define HWRM_CFA_EEM_CFG_INPUT_FLAGS_PATH_RX \ UINT32_C(0x2) - /* Generic Routing Encapsulation (GRE) inside Ethernet payload */ - #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \ - UINT32_C(0x3) - /* IP in IP */ - #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \ + /* When set to 1, all offloaded flows will be sent to EEM. */ + #define HWRM_CFA_EEM_CFG_INPUT_FLAGS_PREFERRED_OFFLOAD \ UINT32_C(0x4) - /* Generic Network Virtualization Encapsulation (Geneve) */ - #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \ - UINT32_C(0x5) - /* Multi-Protocol Lable Switching (MPLS) */ - #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \ - UINT32_C(0x6) - /* Stateless Transport Tunnel (STT) */ - #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \ - UINT32_C(0x7) - /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ - #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \ + /* When set to 1, secondary, 0 means primary. */ + #define HWRM_CFA_EEM_CFG_INPUT_FLAGS_SECONDARY_PF \ UINT32_C(0x8) - /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ - #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \ - UINT32_C(0x9) - /* Any tunneled traffic */ - #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \ - UINT32_C(0xff) - #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_LAST \ - HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL /* - * tunnel_flags allows the user to indicate the tunnel tag detection - * for the tunnel type specified in tunnel_type. + * Group_id which used by Firmware to identify memory pools belonging + * to certain group. */ - uint8_t tunnel_flags; + uint16_t group_id; + uint16_t unused_0; /* - * If the tunnel_type is geneve, then this bit indicates if we - * need to match the geneve OAM packet. - * If the tunnel_type is nvgre or gre, then this bit indicates if - * we need to detect checksum present bit in geneve header. - * If the tunnel_type is mpls, then this bit indicates if we need - * to match mpls packet with explicit IPV4/IPV6 null header. + * Configured EEM with the given number of entries. All the EEM tables KEY0, KEY1, + * RECORD, EFC all have the same number of entries and all tables will be configured + * using this value. Current minimum value is 32k. Current maximum value is 128M. */ - #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_FLAGS_TUN_FLAGS_OAM_CHECKSUM_EXPLHDR \ - UINT32_C(0x1) + uint32_t num_entries; + uint32_t unused_1; + /* Configured EEM with the given context if for KEY0 table. */ + uint16_t key0_ctx_id; + /* Configured EEM with the given context if for KEY1 table. */ + uint16_t key1_ctx_id; + /* Configured EEM with the given context if for RECORD table. */ + uint16_t record_ctx_id; + /* Configured EEM with the given context if for EFC table. */ + uint16_t efc_ctx_id; + /* Configured EEM with the given context if for EFC table. */ + uint16_t fid_ctx_id; + uint16_t unused_2; + uint32_t unused_3; +} __rte_packed; + +/* hwrm_cfa_eem_cfg_output (size:128b/16B) */ +struct hwrm_cfa_eem_cfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; /* - * If the tunnel_type is geneve, then this bit indicates if we - * need to detect the critical option bit set in the oam packet. - * If the tunnel_type is nvgre or gre, then this bit indicates - * if we need to match nvgre packets with key present bit set in - * gre header. - * If the tunnel_type is mpls, then this bit indicates if we - * need to match mpls packet with S bit from inner/second label. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_FLAGS_TUN_FLAGS_CRITICAL_OPT_S1 \ - UINT32_C(0x2) + uint8_t valid; +} __rte_packed; + +/********************* + * hwrm_cfa_eem_qcfg * + *********************/ + + +/* hwrm_cfa_eem_qcfg_input (size:192b/24B) */ +struct hwrm_cfa_eem_qcfg_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * If the tunnel_type is geneve, then this bit indicates if we - * need to match geneve packet with extended header bit set in - * geneve header. - * If the tunnel_type is nvgre or gre, then this bit indicates - * if we need to match nvgre packets with sequence number - * present bit set in gre header. - * If the tunnel_type is mpls, then this bit indicates if we - * need to match mpls packet with S bit from out/first label. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_FLAGS_TUN_FLAGS_EXTHDR_SEQNUM_S0 \ - UINT32_C(0x4) + uint16_t cmpl_ring; /* - * Virtual Network Identifier (VNI). Only valid with - * tunnel_types VXLAN, NVGRE, and Geneve. - * Only lower 24-bits of VNI field are used - * in setting up the filter. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - uint32_t vni; - /* Logical VNIC ID of the destination VNIC. */ - uint32_t dst_vnic_id; + uint16_t seq_id; /* - * Logical VNIC ID of the VNIC where traffic is - * mirrored. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - uint32_t mirror_vnic_id; -} __attribute__((packed)); + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + uint32_t flags; + /* When set to 1, indicates the configuration is the TX flow. */ + #define HWRM_CFA_EEM_QCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x1) + /* When set to 1, indicates the configuration is the RX flow. */ + #define HWRM_CFA_EEM_QCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x2) + uint32_t unused_0; +} __rte_packed; -/* hwrm_cfa_tunnel_filter_alloc_output (size:192b/24B) */ -struct hwrm_cfa_tunnel_filter_alloc_output { +/* hwrm_cfa_eem_qcfg_output (size:256b/32B) */ +struct hwrm_cfa_eem_qcfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -21956,34 +36003,46 @@ struct hwrm_cfa_tunnel_filter_alloc_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* This value is an opaque id into CFA data structures. */ - uint64_t tunnel_filter_id; - /* - * This is the ID of the flow associated with this - * filter. - * This value shall be used to match and associate the - * flow identifier returned in completion records. - * A value of 0xFFFFFFFF shall indicate no flow id. - */ - uint32_t flow_id; - uint8_t unused_0[3]; + uint32_t flags; + /* When set to 1, indicates the configuration is the TX flow. */ + #define HWRM_CFA_EEM_QCFG_OUTPUT_FLAGS_PATH_TX \ + UINT32_C(0x1) + /* When set to 1, indicates the configuration is the RX flow. */ + #define HWRM_CFA_EEM_QCFG_OUTPUT_FLAGS_PATH_RX \ + UINT32_C(0x2) + /* When set to 1, all offloaded flows will be sent to EEM. */ + #define HWRM_CFA_EEM_QCFG_OUTPUT_FLAGS_PREFERRED_OFFLOAD \ + UINT32_C(0x4) + /* The number of entries the FW has configured for EEM. */ + uint32_t num_entries; + /* Configured EEM with the given context if for KEY0 table. */ + uint16_t key0_ctx_id; + /* Configured EEM with the given context if for KEY1 table. */ + uint16_t key1_ctx_id; + /* Configured EEM with the given context if for RECORD table. */ + uint16_t record_ctx_id; + /* Configured EEM with the given context if for EFC table. */ + uint16_t efc_ctx_id; + /* Configured EEM with the given context if for EFC table. */ + uint16_t fid_ctx_id; + uint8_t unused_2[5]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/******************************* - * hwrm_cfa_tunnel_filter_free * - *******************************/ +/******************* + * hwrm_cfa_eem_op * + *******************/ -/* hwrm_cfa_tunnel_filter_free_input (size:192b/24B) */ -struct hwrm_cfa_tunnel_filter_free_input { +/* hwrm_cfa_eem_op_input (size:192b/24B) */ +struct hwrm_cfa_eem_op_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -22000,7 +36059,8 @@ struct hwrm_cfa_tunnel_filter_free_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -22011,12 +36071,49 @@ struct hwrm_cfa_tunnel_filter_free_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* This value is an opaque id into CFA data structures. */ - uint64_t tunnel_filter_id; -} __attribute__((packed)); + uint32_t flags; + /* + * When set to 1, indicates the host memory which is passed will be + * used for the TX flow offload function specified in fid. + * Note if this bit is set then the path_rx bit can't be set. + */ + #define HWRM_CFA_EEM_OP_INPUT_FLAGS_PATH_TX UINT32_C(0x1) + /* + * When set to 1, indicates the host memory which is passed will be + * used for the RX flow offload function specified in fid. + * Note if this bit is set then the path_tx bit can't be set. + */ + #define HWRM_CFA_EEM_OP_INPUT_FLAGS_PATH_RX UINT32_C(0x2) + uint16_t unused_0; + /* The number of EEM key table entries to be configured. */ + uint16_t op; + /* This value is reserved and should not be used. */ + #define HWRM_CFA_EEM_OP_INPUT_OP_RESERVED UINT32_C(0x0) + /* + * To properly stop EEM and ensure there are no DMA's, the caller + * must disable EEM for the given PF, using this call. This will + * safely disable EEM and ensure that all DMA'ed to the + * keys/records/efc have been completed. + */ + #define HWRM_CFA_EEM_OP_INPUT_OP_EEM_DISABLE UINT32_C(0x1) + /* + * Once the EEM host memory has been configured, EEM options have + * been configured. Then the caller should enable EEM for the given + * PF. Note once this call has been made, then the EEM mechanism + * will be active and DMA's will occur as packets are processed. + */ + #define HWRM_CFA_EEM_OP_INPUT_OP_EEM_ENABLE UINT32_C(0x2) + /* + * Clear EEM settings for the given PF so that the register values + * are reset back to there initial state. + */ + #define HWRM_CFA_EEM_OP_INPUT_OP_EEM_CLEANUP UINT32_C(0x3) + #define HWRM_CFA_EEM_OP_INPUT_OP_LAST \ + HWRM_CFA_EEM_OP_INPUT_OP_EEM_CLEANUP +} __rte_packed; -/* hwrm_cfa_tunnel_filter_free_output (size:128b/16B) */ -struct hwrm_cfa_tunnel_filter_free_output { +/* hwrm_cfa_eem_op_output (size:128b/16B) */ +struct hwrm_cfa_eem_op_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -22028,21 +36125,21 @@ struct hwrm_cfa_tunnel_filter_free_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/*************************************** - * hwrm_cfa_redirect_tunnel_type_alloc * - ***************************************/ +/******************************** + * hwrm_cfa_adv_flow_mgnt_qcaps * + ********************************/ -/* hwrm_cfa_redirect_tunnel_type_alloc_input (size:192b/24B) */ -struct hwrm_cfa_redirect_tunnel_type_alloc_input { +/* hwrm_cfa_adv_flow_mgnt_qcaps_input (size:256b/32B) */ +struct hwrm_cfa_adv_flow_mgnt_qcaps_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -22059,7 +36156,8 @@ struct hwrm_cfa_redirect_tunnel_type_alloc_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -22070,58 +36168,11 @@ struct hwrm_cfa_redirect_tunnel_type_alloc_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* The destination function id, to whom the traffic is redirected. */ - uint16_t dest_fid; - /* Tunnel Type. */ - uint8_t tunnel_type; - /* Non-tunnel */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \ - UINT32_C(0x0) - /* Virtual eXtensible Local Area Network (VXLAN) */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \ - UINT32_C(0x1) - /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \ - UINT32_C(0x2) - /* Generic Routing Encapsulation (GRE) inside Ethernet payload */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \ - UINT32_C(0x3) - /* IP in IP */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_IPIP \ - UINT32_C(0x4) - /* Generic Network Virtualization Encapsulation (Geneve) */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \ - UINT32_C(0x5) - /* Multi-Protocol Lable Switching (MPLS) */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_MPLS \ - UINT32_C(0x6) - /* Stateless Transport Tunnel (STT) */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_STT \ - UINT32_C(0x7) - /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \ - UINT32_C(0x8) - /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \ - UINT32_C(0x9) - /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \ - UINT32_C(0xa) - /* Any tunneled traffic */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \ - UINT32_C(0xff) - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_LAST \ - HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL - /* Tunnel alloc flags. */ - uint8_t flags; - /* Setting of this flag indicates modify existing redirect tunnel to new destination function ID. */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_FLAGS_MODIFY_DST \ - UINT32_C(0x1) - uint8_t unused_0[4]; -} __attribute__((packed)); + uint32_t unused_0[4]; +} __rte_packed; -/* hwrm_cfa_redirect_tunnel_type_alloc_output (size:128b/16B) */ -struct hwrm_cfa_redirect_tunnel_type_alloc_output { +/* hwrm_cfa_adv_flow_mgnt_qcaps_output (size:128b/16B) */ +struct hwrm_cfa_adv_flow_mgnt_qcaps_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -22130,24 +36181,131 @@ struct hwrm_cfa_redirect_tunnel_type_alloc_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - uint8_t unused_0[7]; + uint32_t flags; + /* + * Value of 1 to indicate firmware support 16-bit flow handle. + * Value of 0 to indicate firmware not support 16-bit flow handle. + */ + #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_HND_16BIT_SUPPORTED \ + UINT32_C(0x1) + /* + * Value of 1 to indicate firmware support 64-bit flow handle. + * Value of 0 to indicate firmware not support 64-bit flow handle. + */ + #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_HND_64BIT_SUPPORTED \ + UINT32_C(0x2) + /* + * Value of 1 to indicate firmware support flow batch delete operation through + * HWRM_CFA_FLOW_FLUSH command. + * Value of 0 to indicate that the firmware does not support flow batch delete + * operation. + */ + #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_BATCH_DELETE_SUPPORTED \ + UINT32_C(0x4) + /* + * Value of 1 to indicate that the firmware support flow reset all operation through + * HWRM_CFA_FLOW_FLUSH command. + * Value of 0 indicates firmware does not support flow reset all operation. + */ + #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_RESET_ALL_SUPPORTED \ + UINT32_C(0x8) + /* + * Value of 1 to indicate that firmware supports use of FID as dest_id in + * HWRM_CFA_NTUPLE_ALLOC/CFG commands. + * Value of 0 indicates firmware does not support use of FID as dest_id. + */ + #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_NTUPLE_FLOW_DEST_FUNC_SUPPORTED \ + UINT32_C(0x10) + /* + * Value of 1 to indicate that firmware supports TX EEM flows. + * Value of 0 indicates firmware does not support TX EEM flows. + */ + #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_TX_EEM_FLOW_SUPPORTED \ + UINT32_C(0x20) + /* + * Value of 1 to indicate that firmware supports RX EEM flows. + * Value of 0 indicates firmware does not support RX EEM flows. + */ + #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_RX_EEM_FLOW_SUPPORTED \ + UINT32_C(0x40) + /* + * Value of 1 to indicate that firmware supports the dynamic allocation of an + * on-chip flow counter which can be used for EEM flows. + * Value of 0 indicates firmware does not support the dynamic allocation of an + * on-chip flow counter. + */ + #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_COUNTER_ALLOC_SUPPORTED \ + UINT32_C(0x80) + /* + * Value of 1 to indicate that firmware supports setting of + * rfs_ring_tbl_idx in HWRM_CFA_NTUPLE_ALLOC command. + * Value of 0 indicates firmware does not support rfs_ring_tbl_idx. + */ + #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_RFS_RING_TBL_IDX_SUPPORTED \ + UINT32_C(0x100) + /* + * Value of 1 to indicate that firmware supports untagged matching + * criteria on HWRM_CFA_L2_FILTER_ALLOC command. Value of 0 + * indicates firmware does not support untagged matching. + */ + #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_UNTAGGED_VLAN_SUPPORTED \ + UINT32_C(0x200) + /* + * Value of 1 to indicate that firmware supports XDP filter. Value + * of 0 indicates firmware does not support XDP filter. + */ + #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_XDP_SUPPORTED \ + UINT32_C(0x400) + /* + * Value of 1 to indicate that the firmware support L2 header source + * fields matching criteria on HWRM_CFA_L2_FILTER_ALLOC command. + * Value of 0 indicates firmware does not support L2 header source + * fields matching. + */ + #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_L2_HEADER_SOURCE_FIELDS_SUPPORTED \ + UINT32_C(0x800) + /* + * If set to 1, firmware is capable of supporting ARP ethertype as + * matching criteria for HWRM_CFA_NTUPLE_FILTER_ALLOC command on the + * RX direction. By default, this flag should be 0 for older version + * of firmware. + */ + #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_NTUPLE_FLOW_RX_ARP_SUPPORTED \ + UINT32_C(0x1000) + /* + * Value of 1 to indicate that firmware supports setting of + * rfs_ring_tbl_idx in dst_id field of the HWRM_CFA_NTUPLE_ALLOC + * command. Value of 0 indicates firmware does not support + * rfs_ring_tbl_idx in dst_id field. + */ + #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_RFS_RING_TBL_IDX_V2_SUPPORTED \ + UINT32_C(0x2000) + /* + * If set to 1, firmware is capable of supporting IPv4/IPv6 as + * ethertype in HWRM_CFA_NTUPLE_FILTER_ALLOC command on the RX + * direction. By default, this flag should be 0 for older version + * of firmware. + */ + #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_NTUPLE_FLOW_RX_ETHERTYPE_IP_SUPPORTED \ + UINT32_C(0x4000) + uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/************************************** - * hwrm_cfa_redirect_tunnel_type_free * - **************************************/ +/****************** + * hwrm_cfa_tflib * + ******************/ -/* hwrm_cfa_redirect_tunnel_type_free_input (size:192b/24B) */ -struct hwrm_cfa_redirect_tunnel_type_free_input { +/* hwrm_cfa_tflib_input (size:1024b/128B) */ +struct hwrm_cfa_tflib_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -22164,7 +36322,8 @@ struct hwrm_cfa_redirect_tunnel_type_free_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -22175,53 +36334,18 @@ struct hwrm_cfa_redirect_tunnel_type_free_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* The destination function id, to whom the traffic is redirected. */ - uint16_t dest_fid; - /* Tunnel Type. */ - uint8_t tunnel_type; - /* Non-tunnel */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_NONTUNNEL \ - UINT32_C(0x0) - /* Virtual eXtensible Local Area Network (VXLAN) */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_VXLAN \ - UINT32_C(0x1) - /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_NVGRE \ - UINT32_C(0x2) - /* Generic Routing Encapsulation (GRE) inside Ethernet payload */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_L2GRE \ - UINT32_C(0x3) - /* IP in IP */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_IPIP \ - UINT32_C(0x4) - /* Generic Network Virtualization Encapsulation (Geneve) */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_GENEVE \ - UINT32_C(0x5) - /* Multi-Protocol Lable Switching (MPLS) */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_MPLS \ - UINT32_C(0x6) - /* Stateless Transport Tunnel (STT) */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_STT \ - UINT32_C(0x7) - /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_IPGRE \ - UINT32_C(0x8) - /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_VXLAN_V4 \ - UINT32_C(0x9) - /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_IPGRE_V1 \ - UINT32_C(0xa) - /* Any tunneled traffic */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_ANYTUNNEL \ - UINT32_C(0xff) - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_LAST \ - HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_ANYTUNNEL - uint8_t unused_0[5]; -} __attribute__((packed)); - -/* hwrm_cfa_redirect_tunnel_type_free_output (size:128b/16B) */ -struct hwrm_cfa_redirect_tunnel_type_free_output { + /* TFLIB message type. */ + uint16_t tf_type; + /* TFLIB message subtype. */ + uint16_t tf_subtype; + /* unused. */ + uint8_t unused0[4]; + /* TFLIB request data. */ + uint32_t tf_req[26]; +} __rte_packed; + +/* hwrm_cfa_tflib_output (size:5632b/704B) */ +struct hwrm_cfa_tflib_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -22230,24 +36354,33 @@ struct hwrm_cfa_redirect_tunnel_type_free_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - uint8_t unused_0[7]; + /* TFLIB message type. */ + uint16_t tf_type; + /* TFLIB message subtype. */ + uint16_t tf_subtype; + /* TFLIB response code */ + uint32_t tf_resp_code; + /* TFLIB response data. */ + uint32_t tf_resp[170]; + /* unused. */ + uint8_t unused1[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/************************************** - * hwrm_cfa_redirect_tunnel_type_info * - **************************************/ +/*********** + * hwrm_tf * + ***********/ -/* hwrm_cfa_redirect_tunnel_type_info_input (size:192b/24B) */ -struct hwrm_cfa_redirect_tunnel_type_info_input { +/* hwrm_tf_input (size:1024b/128B) */ +struct hwrm_tf_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -22264,7 +36397,8 @@ struct hwrm_cfa_redirect_tunnel_type_info_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -22275,53 +36409,18 @@ struct hwrm_cfa_redirect_tunnel_type_info_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* The source function id. */ - uint16_t src_fid; - /* Tunnel Type. */ - uint8_t tunnel_type; - /* Non-tunnel */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_NONTUNNEL \ - UINT32_C(0x0) - /* Virtual eXtensible Local Area Network (VXLAN) */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_VXLAN \ - UINT32_C(0x1) - /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_NVGRE \ - UINT32_C(0x2) - /* Generic Routing Encapsulation (GRE) inside Ethernet payload */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_L2GRE \ - UINT32_C(0x3) - /* IP in IP */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_IPIP \ - UINT32_C(0x4) - /* Generic Network Virtualization Encapsulation (Geneve) */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_GENEVE \ - UINT32_C(0x5) - /* Multi-Protocol Lable Switching (MPLS) */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_MPLS \ - UINT32_C(0x6) - /* Stateless Transport Tunnel (STT) */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_STT \ - UINT32_C(0x7) - /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_IPGRE \ - UINT32_C(0x8) - /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_VXLAN_V4 \ - UINT32_C(0x9) - /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_IPGRE_V1 \ - UINT32_C(0xa) - /* Any tunneled traffic */ - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_ANYTUNNEL \ - UINT32_C(0xff) - #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_LAST \ - HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_ANYTUNNEL - uint8_t unused_0[5]; -} __attribute__((packed)); - -/* hwrm_cfa_redirect_tunnel_type_info_output (size:128b/16B) */ -struct hwrm_cfa_redirect_tunnel_type_info_output { + /* TF message type. */ + uint16_t type; + /* TF message subtype. */ + uint16_t subtype; + /* unused. */ + uint8_t unused0[4]; + /* TF request data. */ + uint32_t req[26]; +} __rte_packed; + +/* hwrm_tf_output (size:5632b/704B) */ +struct hwrm_tf_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -22330,133 +36429,100 @@ struct hwrm_cfa_redirect_tunnel_type_info_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* The destination function id, to whom the traffic is redirected. */ - uint16_t dest_fid; - uint8_t unused_0[5]; - /* - * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' - * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. + /* TF message type. */ + uint16_t type; + /* TF message subtype. */ + uint16_t subtype; + /* TF response code */ + uint32_t resp_code; + /* TF response data. */ + uint32_t resp[170]; + /* unused. */ + uint8_t unused1[7]; + /* + * This field is used in Output records to indicate that the + * output is completely written to RAM. This field should be + * read as '1' to indicate that the output has been + * completely written. When writing a command completion or + * response to an internal processor, the order of writes has + * to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/* hwrm_vxlan_ipv4_hdr (size:128b/16B) */ -struct hwrm_vxlan_ipv4_hdr { - /* IPv4 version and header length. */ - uint8_t ver_hlen; - /* IPv4 header length */ - #define HWRM_VXLAN_IPV4_HDR_VER_HLEN_HEADER_LENGTH_MASK UINT32_C(0xf) - #define HWRM_VXLAN_IPV4_HDR_VER_HLEN_HEADER_LENGTH_SFT 0 - /* Version */ - #define HWRM_VXLAN_IPV4_HDR_VER_HLEN_VERSION_MASK UINT32_C(0xf0) - #define HWRM_VXLAN_IPV4_HDR_VER_HLEN_VERSION_SFT 4 - /* IPv4 type of service. */ - uint8_t tos; - /* IPv4 identification. */ - uint16_t ip_id; - /* IPv4 flags and offset. */ - uint16_t flags_frag_offset; - /* IPv4 TTL. */ - uint8_t ttl; - /* IPv4 protocol. */ - uint8_t protocol; - /* IPv4 source address. */ - uint32_t src_ip_addr; - /* IPv4 destination address. */ - uint32_t dest_ip_addr; -} __attribute__((packed)); +/*********************** + * hwrm_tf_version_get * + ***********************/ -/* hwrm_vxlan_ipv6_hdr (size:320b/40B) */ -struct hwrm_vxlan_ipv6_hdr { - /* IPv6 version, traffic class and flow label. */ - uint32_t ver_tc_flow_label; - /* IPv6 version shift */ - #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_VER_SFT \ - UINT32_C(0x1c) - /* IPv6 version mask */ - #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_VER_MASK \ - UINT32_C(0xf0000000) - /* IPv6 TC shift */ - #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_TC_SFT \ - UINT32_C(0x14) - /* IPv6 TC mask */ - #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_TC_MASK \ - UINT32_C(0xff00000) - /* IPv6 flow label shift */ - #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_FLOW_LABEL_SFT \ - UINT32_C(0x0) - /* IPv6 flow label mask */ - #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_FLOW_LABEL_MASK \ - UINT32_C(0xfffff) - #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_LAST \ - HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_FLOW_LABEL_MASK - /* IPv6 payload length. */ - uint16_t payload_len; - /* IPv6 next header. */ - uint8_t next_hdr; - /* IPv6 TTL. */ - uint8_t ttl; - /* IPv6 source address. */ - uint32_t src_ip_addr[4]; - /* IPv6 destination address. */ - uint32_t dest_ip_addr[4]; -} __attribute__((packed)); -/* hwrm_cfa_encap_data_vxlan (size:640b/80B) */ -struct hwrm_cfa_encap_data_vxlan { - /* Source MAC address. */ - uint8_t src_mac_addr[6]; - /* reserved. */ - uint16_t unused_0; - /* Destination MAC address. */ - uint8_t dst_mac_addr[6]; - /* Number of VLAN tags. */ - uint8_t num_vlan_tags; - /* reserved. */ - uint8_t unused_1; - /* Outer VLAN TPID. */ - uint16_t ovlan_tpid; - /* Outer VLAN TCI. */ - uint16_t ovlan_tci; - /* Inner VLAN TPID. */ - uint16_t ivlan_tpid; - /* Inner VLAN TCI. */ - uint16_t ivlan_tci; - /* L3 header fields. */ - uint32_t l3[10]; - /* IP version mask. */ - #define HWRM_CFA_ENCAP_DATA_VXLAN_L3_VER_MASK UINT32_C(0xf) - /* IP version 4. */ - #define HWRM_CFA_ENCAP_DATA_VXLAN_L3_VER_IPV4 UINT32_C(0x4) - /* IP version 6. */ - #define HWRM_CFA_ENCAP_DATA_VXLAN_L3_VER_IPV6 UINT32_C(0x6) - #define HWRM_CFA_ENCAP_DATA_VXLAN_L3_LAST \ - HWRM_CFA_ENCAP_DATA_VXLAN_L3_VER_IPV6 - /* UDP source port. */ - uint16_t src_port; - /* UDP destination port. */ - uint16_t dst_port; - /* VXLAN Network Identifier. */ - uint32_t vni; - /* 3 bytes VXLAN header reserve fields from 1st dword of the VXLAN header. */ - uint8_t hdr_rsvd0[3]; - /* 1 byte VXLAN header reserve field from 2nd dword of the VXLAN header. */ - uint8_t hdr_rsvd1; - /* VXLAN header flags field. */ - uint8_t hdr_flags; - uint8_t unused[3]; -} __attribute__((packed)); +/* hwrm_tf_version_get_input (size:128b/16B) */ +struct hwrm_tf_version_get_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; +} __rte_packed; -/******************************* - * hwrm_cfa_encap_record_alloc * - *******************************/ +/* hwrm_tf_version_get_output (size:128b/16B) */ +struct hwrm_tf_version_get_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* Version Major number. */ + uint8_t major; + /* Version Minor number. */ + uint8_t minor; + /* Version Update number. */ + uint8_t update; + /* unused. */ + uint8_t unused0[4]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal + * processor, the order of writes has to be such that this field is + * written last. + */ + uint8_t valid; +} __rte_packed; +/************************ + * hwrm_tf_session_open * + ************************/ -/* hwrm_cfa_encap_record_alloc_input (size:832b/104B) */ -struct hwrm_cfa_encap_record_alloc_input { + +/* hwrm_tf_session_open_input (size:640b/80B) */ +struct hwrm_tf_session_open_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -22473,7 +36539,8 @@ struct hwrm_cfa_encap_record_alloc_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -22484,48 +36551,12 @@ struct hwrm_cfa_encap_record_alloc_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - uint32_t flags; - /* Setting of this flag indicates the applicability to the loopback path. */ - #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_FLAGS_LOOPBACK \ - UINT32_C(0x1) - /* Encapsulation Type. */ - uint8_t encap_type; - /* Virtual eXtensible Local Area Network (VXLAN) */ - #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VXLAN \ - UINT32_C(0x1) - /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ - #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_NVGRE \ - UINT32_C(0x2) - /* Generic Routing Encapsulation (GRE) after inside Ethernet payload */ - #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_L2GRE \ - UINT32_C(0x3) - /* IP in IP */ - #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_IPIP \ - UINT32_C(0x4) - /* Generic Network Virtualization Encapsulation (Geneve) */ - #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_GENEVE \ - UINT32_C(0x5) - /* Multi-Protocol Lable Switching (MPLS) */ - #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_MPLS \ - UINT32_C(0x6) - /* VLAN */ - #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VLAN \ - UINT32_C(0x7) - /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ - #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_IPGRE \ - UINT32_C(0x8) - /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ - #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VXLAN_V4 \ - UINT32_C(0x9) - #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_LAST \ - HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VXLAN_V4 - uint8_t unused_0[3]; - /* This value is encap data used for the given encap type. */ - uint32_t encap_data[20]; -} __attribute__((packed)); + /* Name of the session. */ + uint8_t session_name[64]; +} __rte_packed; -/* hwrm_cfa_encap_record_alloc_output (size:128b/16B) */ -struct hwrm_cfa_encap_record_alloc_output { +/* hwrm_tf_session_open_output (size:192b/24B) */ +struct hwrm_tf_session_open_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -22534,26 +36565,38 @@ struct hwrm_cfa_encap_record_alloc_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* This value is an opaque id into CFA data structures. */ - uint32_t encap_record_id; - uint8_t unused_0[3]; + /* + * Unique session identifier for the session created by the + * firmware. + */ + uint32_t fw_session_id; + /* + * Unique session client identifier for the first client on + * the newly created session. + */ + uint32_t fw_session_client_id; + /* unused. */ + uint32_t unused0; + /* unused. */ + uint8_t unused1[3]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. + * When writing a command completion or response to an internal + * processor, the order of writes has to be such that this field is + * written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/****************************** - * hwrm_cfa_encap_record_free * - ******************************/ +/************************** + * hwrm_tf_session_attach * + **************************/ -/* hwrm_cfa_encap_record_free_input (size:192b/24B) */ -struct hwrm_cfa_encap_record_free_input { +/* hwrm_tf_session_attach_input (size:704b/88B) */ +struct hwrm_tf_session_attach_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -22570,7 +36613,8 @@ struct hwrm_cfa_encap_record_free_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -22581,13 +36625,25 @@ struct hwrm_cfa_encap_record_free_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* This value is an opaque id into CFA data structures. */ - uint32_t encap_record_id; - uint8_t unused_0[4]; -} __attribute__((packed)); + /* + * Unique session identifier for the session that the attach + * request want to attach to. This value originates from the + * shared session memory that the attach request opened by + * way of the 'attach name' that was passed in to the core + * attach API. + * The fw_session_id of the attach session includes PCIe bus + * info to distinguish the PF and session info to identify + * the associated TruFlow session. + */ + uint32_t attach_fw_session_id; + /* unused. */ + uint32_t unused0; + /* Name of the session it self. */ + uint8_t session_name[64]; +} __rte_packed; -/* hwrm_cfa_encap_record_free_output (size:128b/16B) */ -struct hwrm_cfa_encap_record_free_output { +/* hwrm_tf_session_attach_output (size:128b/16B) */ +struct hwrm_tf_session_attach_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -22596,24 +36652,34 @@ struct hwrm_cfa_encap_record_free_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - uint8_t unused_0[7]; + /* + * Unique session identifier for the session created by the + * firmware. It includes PCIe bus info to distinguish the PF + * and session info to identify the associated TruFlow + * session. This fw_session_id is unique to the attach + * request. + */ + uint32_t fw_session_id; + /* unused. */ + uint8_t unused0[3]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. + * When writing a command completion or response to an internal + * processor, the order of writes has to be such that this field is + * written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/******************************** - * hwrm_cfa_ntuple_filter_alloc * - ********************************/ +/**************************** + * hwrm_tf_session_register * + ****************************/ -/* hwrm_cfa_ntuple_filter_alloc_input (size:1024b/128B) */ -struct hwrm_cfa_ntuple_filter_alloc_input { +/* hwrm_tf_session_register_input (size:704b/88B) */ +struct hwrm_tf_session_register_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -22630,7 +36696,8 @@ struct hwrm_cfa_ntuple_filter_alloc_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -22641,316 +36708,482 @@ struct hwrm_cfa_ntuple_filter_alloc_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - uint32_t flags; - /* Setting of this flag indicates the applicability to the loopback path. */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK \ - UINT32_C(0x1) /* - * Setting of this flag indicates drop action. If this flag is not set, - * then it should be considered accept action. + * Unique session identifier for the session that the + * register request want to create a new client on. This + * value originates from the first open request. + * The fw_session_id of the attach session includes PCIe bus + * info to distinguish the PF and session info to identify + * the associated TruFlow session. */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_DROP \ - UINT32_C(0x2) + uint32_t fw_session_id; + /* unused. */ + uint32_t unused0; + /* Name of the session client. */ + uint8_t session_client_name[64]; +} __rte_packed; + +/* hwrm_tf_session_register_output (size:128b/16B) */ +struct hwrm_tf_session_register_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; /* - * Setting of this flag indicates that a meter is expected to be attached - * to this flow. This hint can be used when choosing the action record - * format required for the flow. + * Unique session client identifier for the session created + * by the firmware. It includes the session the client it + * attached to and session client info. */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_METER \ - UINT32_C(0x4) - uint32_t enables; + uint32_t fw_session_client_id; + /* unused. */ + uint8_t unused0[3]; /* - * This bit must be '1' for the l2_filter_id field to be - * configured. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal + * processor, the order of writes has to be such that this field is + * written last. */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_L2_FILTER_ID \ - UINT32_C(0x1) + uint8_t valid; +} __rte_packed; + +/****************************** + * hwrm_tf_session_unregister * + ******************************/ + + +/* hwrm_tf_session_unregister_input (size:192b/24B) */ +struct hwrm_tf_session_unregister_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * This bit must be '1' for the ethertype field to be - * configured. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_ETHERTYPE \ - UINT32_C(0x2) + uint16_t cmpl_ring; /* - * This bit must be '1' for the tunnel_type field to be - * configured. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \ - UINT32_C(0x4) + uint16_t seq_id; /* - * This bit must be '1' for the src_macaddr field to be - * configured. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_MACADDR \ - UINT32_C(0x8) + uint16_t target_id; /* - * This bit must be '1' for the ipaddr_type field to be - * configured. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_IPADDR_TYPE \ - UINT32_C(0x10) + uint64_t resp_addr; /* - * This bit must be '1' for the src_ipaddr field to be - * configured. + * Unique session identifier for the session that the + * unregister request want to close a session client on. */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_IPADDR \ - UINT32_C(0x20) + uint32_t fw_session_id; /* - * This bit must be '1' for the src_ipaddr_mask field to be - * configured. + * Unique session client identifier for the session that the + * unregister request want to close. */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_IPADDR_MASK \ - UINT32_C(0x40) + uint32_t fw_session_client_id; +} __rte_packed; + +/* hwrm_tf_session_unregister_output (size:128b/16B) */ +struct hwrm_tf_session_unregister_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* unused. */ + uint8_t unused0[7]; /* - * This bit must be '1' for the dst_ipaddr field to be - * configured. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal + * processor, the order of writes has to be such that this field is + * written last. */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_IPADDR \ - UINT32_C(0x80) + uint8_t valid; +} __rte_packed; + +/************************* + * hwrm_tf_session_close * + *************************/ + + +/* hwrm_tf_session_close_input (size:192b/24B) */ +struct hwrm_tf_session_close_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * This bit must be '1' for the dst_ipaddr_mask field to be - * configured. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_IPADDR_MASK \ - UINT32_C(0x100) + uint16_t cmpl_ring; /* - * This bit must be '1' for the ip_protocol field to be - * configured. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_IP_PROTOCOL \ - UINT32_C(0x200) + uint16_t seq_id; /* - * This bit must be '1' for the src_port field to be - * configured. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_PORT \ - UINT32_C(0x400) + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */ + uint32_t fw_session_id; + /* unused. */ + uint8_t unused0[4]; +} __rte_packed; + +/* hwrm_tf_session_close_output (size:128b/16B) */ +struct hwrm_tf_session_close_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* unused. */ + uint8_t unused0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal + * processor, the order of writes has to be such that this field + * is written last. + */ + uint8_t valid; +} __rte_packed; + +/************************ + * hwrm_tf_session_qcfg * + ************************/ + + +/* hwrm_tf_session_qcfg_input (size:192b/24B) */ +struct hwrm_tf_session_qcfg_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * This bit must be '1' for the src_port_mask field to be - * configured. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_PORT_MASK \ - UINT32_C(0x800) + uint16_t cmpl_ring; /* - * This bit must be '1' for the dst_port field to be - * configured. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_PORT \ - UINT32_C(0x1000) + uint16_t seq_id; /* - * This bit must be '1' for the dst_port_mask field to be - * configured. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_PORT_MASK \ - UINT32_C(0x2000) + uint16_t target_id; /* - * This bit must be '1' for the pri_hint field to be - * configured. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_PRI_HINT \ - UINT32_C(0x4000) + uint64_t resp_addr; + /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */ + uint32_t fw_session_id; + /* unused. */ + uint8_t unused0[4]; +} __rte_packed; + +/* hwrm_tf_session_qcfg_output (size:128b/16B) */ +struct hwrm_tf_session_qcfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* RX action control settings flags. */ + uint8_t rx_act_flags; /* - * This bit must be '1' for the ntuple_filter_id field to be - * configured. + * A value of 1 in this field indicates that Global Flow ID + * reporting into cfa_code and cfa_metadata is enabled. */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_NTUPLE_FILTER_ID \ - UINT32_C(0x8000) + #define HWRM_TF_SESSION_QCFG_OUTPUT_RX_ACT_FLAGS_ABCR_GFID_EN \ + UINT32_C(0x1) /* - * This bit must be '1' for the dst_id field to be - * configured. + * A value of 1 in this field indicates that both inner and outer + * are stripped and inner tag is passed. + * Enabled. */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_ID \ - UINT32_C(0x10000) + #define HWRM_TF_SESSION_QCFG_OUTPUT_RX_ACT_FLAGS_ABCR_VTAG_DLT_BOTH \ + UINT32_C(0x2) /* - * This bit must be '1' for the mirror_vnic_id field to be - * configured. + * A value of 1 in this field indicates that the re-use of + * existing tunnel L2 header SMAC is enabled for + * Non-tunnel L2, L2-L3 and IP-IP tunnel. */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \ - UINT32_C(0x20000) + #define HWRM_TF_SESSION_QCFG_OUTPUT_RX_ACT_FLAGS_TECT_SMAC_OVR_RUTNSL2 \ + UINT32_C(0x4) + /* TX Action control settings flags. */ + uint8_t tx_act_flags; + /* Disabled. */ + #define HWRM_TF_SESSION_QCFG_OUTPUT_TX_ACT_FLAGS_ABCR_VEB_EN \ + UINT32_C(0x1) /* - * This bit must be '1' for the dst_macaddr field to be - * configured. + * When set to 1 any GRE tunnels will include the + * optional Key field. */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_MACADDR \ - UINT32_C(0x40000) + #define HWRM_TF_SESSION_QCFG_OUTPUT_TX_ACT_FLAGS_TECT_GRE_SET_K \ + UINT32_C(0x2) /* - * This value identifies a set of CFA data structures used for an L2 - * context. + * When set to 1, for GRE tunnels, the IPV6 Traffic Class (TC) + * field of the outer header is inherited from the inner header + * (if present) or the fixed value as taken from the encap + * record. */ - uint64_t l2_filter_id; + #define HWRM_TF_SESSION_QCFG_OUTPUT_TX_ACT_FLAGS_TECT_IPV6_TC_IH \ + UINT32_C(0x4) /* - * This value indicates the source MAC address in - * the Ethernet header. + * When set to 1, for GRE tunnels, the IPV4 Type Of Service (TOS) + * field of the outer header is inherited from the inner header + * (if present) or the fixed value as taken from the encap record. */ - uint8_t src_macaddr[6]; - /* This value indicates the ethertype in the Ethernet header. */ - uint16_t ethertype; + #define HWRM_TF_SESSION_QCFG_OUTPUT_TX_ACT_FLAGS_TECT_IPV4_TOS_IH \ + UINT32_C(0x8) + /* unused. */ + uint8_t unused0[5]; /* - * This value indicates the type of IP address. - * 4 - IPv4 - * 6 - IPv6 - * All others are invalid. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal + * processor, the order of writes has to be such that this field + * is written last. */ - uint8_t ip_addr_type; - /* invalid */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_UNKNOWN \ - UINT32_C(0x0) - /* IPv4 */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV4 \ - UINT32_C(0x4) - /* IPv6 */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 \ - UINT32_C(0x6) - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_LAST \ - HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 + uint8_t valid; +} __rte_packed; + +/****************************** + * hwrm_tf_session_resc_qcaps * + ******************************/ + + +/* hwrm_tf_session_resc_qcaps_input (size:256b/32B) */ +struct hwrm_tf_session_resc_qcaps_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * The value of protocol filed in IP header. - * Applies to UDP and TCP traffic. - * 6 - TCP - * 17 - UDP + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - uint8_t ip_protocol; - /* invalid */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UNKNOWN \ - UINT32_C(0x0) - /* TCP */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_TCP \ - UINT32_C(0x6) - /* UDP */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP \ - UINT32_C(0x11) - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_LAST \ - HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP + uint16_t cmpl_ring; /* - * If set, this value shall represent the - * Logical VNIC ID of the destination VNIC for the RX - * path and network port id of the destination port for - * the TX path. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - uint16_t dst_id; + uint16_t seq_id; /* - * Logical VNIC ID of the VNIC where traffic is - * mirrored. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - uint16_t mirror_vnic_id; + uint16_t target_id; /* - * This value indicates the tunnel type for this filter. - * If this field is not specified, then the filter shall - * apply to both non-tunneled and tunneled packets. - * If this field conflicts with the tunnel_type specified - * in the l2_filter_id, then the HWRM shall return an - * error for this command. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - uint8_t tunnel_type; - /* Non-tunnel */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \ - UINT32_C(0x0) - /* Virtual eXtensible Local Area Network (VXLAN) */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \ - UINT32_C(0x1) - /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \ - UINT32_C(0x2) - /* Generic Routing Encapsulation (GRE) inside Ethernet payload */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \ + uint64_t resp_addr; + /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */ + uint32_t fw_session_id; + /* Control flags. */ + uint16_t flags; + /* Indicates the flow direction. */ + #define HWRM_TF_SESSION_RESC_QCAPS_INPUT_FLAGS_DIR UINT32_C(0x1) + /* If this bit set to 0, then it indicates rx flow. */ + #define HWRM_TF_SESSION_RESC_QCAPS_INPUT_FLAGS_DIR_RX UINT32_C(0x0) + /* If this bit is set to 1, then it indicates that tx flow. */ + #define HWRM_TF_SESSION_RESC_QCAPS_INPUT_FLAGS_DIR_TX UINT32_C(0x1) + #define HWRM_TF_SESSION_RESC_QCAPS_INPUT_FLAGS_DIR_LAST \ + HWRM_TF_SESSION_RESC_QCAPS_INPUT_FLAGS_DIR_TX + /* + * Defines the size of the provided qcaps_addr array + * buffer. The size should be set to the Resource Manager + * provided max number of qcaps entries which is device + * specific. Resource Manager gets the max size from HCAPI + * RM. + */ + uint16_t qcaps_size; + /* + * This is the DMA address for the qcaps output data array + * buffer. Array is of tf_rm_resc_req_entry type and is + * device specific. + */ + uint64_t qcaps_addr; +} __rte_packed; + +/* hwrm_tf_session_resc_qcaps_output (size:192b/24B) */ +struct hwrm_tf_session_resc_qcaps_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* Control flags. */ + uint32_t flags; + /* Session reservation strategy. */ + #define HWRM_TF_SESSION_RESC_QCAPS_OUTPUT_FLAGS_SESS_RESV_STRATEGY_MASK \ UINT32_C(0x3) - /* IP in IP */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \ - UINT32_C(0x4) - /* Generic Network Virtualization Encapsulation (Geneve) */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \ - UINT32_C(0x5) - /* Multi-Protocol Lable Switching (MPLS) */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \ - UINT32_C(0x6) - /* Stateless Transport Tunnel (STT) */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \ - UINT32_C(0x7) - /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \ - UINT32_C(0x8) - /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \ - UINT32_C(0x9) - /* Any tunneled traffic */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \ - UINT32_C(0xff) - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_LAST \ - HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL - /* - * This hint is provided to help in placing - * the filter in the filter table. - */ - uint8_t pri_hint; - /* No preference */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_NO_PREFER \ + #define HWRM_TF_SESSION_RESC_QCAPS_OUTPUT_FLAGS_SESS_RESV_STRATEGY_SFT \ + 0 + /* Static partitioning. */ + #define HWRM_TF_SESSION_RESC_QCAPS_OUTPUT_FLAGS_SESS_RESV_STRATEGY_STATIC \ UINT32_C(0x0) - /* Above the given filter */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_ABOVE \ + /* Strategy 1. */ + #define HWRM_TF_SESSION_RESC_QCAPS_OUTPUT_FLAGS_SESS_RESV_STRATEGY_1 \ UINT32_C(0x1) - /* Below the given filter */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_BELOW \ + /* Strategy 2. */ + #define HWRM_TF_SESSION_RESC_QCAPS_OUTPUT_FLAGS_SESS_RESV_STRATEGY_2 \ UINT32_C(0x2) - /* As high as possible */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_HIGHEST \ + /* Strategy 3. */ + #define HWRM_TF_SESSION_RESC_QCAPS_OUTPUT_FLAGS_SESS_RESV_STRATEGY_3 \ UINT32_C(0x3) - /* As low as possible */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_LOWEST \ - UINT32_C(0x4) - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_LAST \ - HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_LOWEST + #define HWRM_TF_SESSION_RESC_QCAPS_OUTPUT_FLAGS_SESS_RESV_STRATEGY_LAST \ + HWRM_TF_SESSION_RESC_QCAPS_OUTPUT_FLAGS_SESS_RESV_STRATEGY_3 /* - * The value of source IP address to be used in filtering. - * For IPv4, first four bytes represent the IP address. - */ - uint32_t src_ipaddr[4]; - /* - * The value of source IP address mask to be used in - * filtering. - * For IPv4, first four bytes represent the IP address mask. + * Size of the returned qcaps_addr data array buffer. The + * value cannot exceed the size defined by the input msg, + * qcaps_size. */ - uint32_t src_ipaddr_mask[4]; + uint16_t size; + /* unused. */ + uint16_t unused0; + /* unused. */ + uint8_t unused1[7]; /* - * The value of destination IP address to be used in filtering. - * For IPv4, first four bytes represent the IP address. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal + * processor, the order of writes has to be such that this field is + * written last. */ - uint32_t dst_ipaddr[4]; + uint8_t valid; +} __rte_packed; + +/****************************** + * hwrm_tf_session_resc_alloc * + ******************************/ + + +/* hwrm_tf_session_resc_alloc_input (size:320b/40B) */ +struct hwrm_tf_session_resc_alloc_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * The value of destination IP address mask to be used in - * filtering. - * For IPv4, first four bytes represent the IP address mask. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - uint32_t dst_ipaddr_mask[4]; + uint16_t cmpl_ring; /* - * The value of source port to be used in filtering. - * Applies to UDP and TCP traffic. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - uint16_t src_port; + uint16_t seq_id; /* - * The value of source port mask to be used in filtering. - * Applies to UDP and TCP traffic. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - uint16_t src_port_mask; + uint16_t target_id; /* - * The value of destination port to be used in filtering. - * Applies to UDP and TCP traffic. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - uint16_t dst_port; - /* - * The value of destination port mask to be used in - * filtering. - * Applies to UDP and TCP traffic. + uint64_t resp_addr; + /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */ + uint32_t fw_session_id; + /* Control flags. */ + uint16_t flags; + /* Indicates the flow direction. */ + #define HWRM_TF_SESSION_RESC_ALLOC_INPUT_FLAGS_DIR UINT32_C(0x1) + /* If this bit set to 0, then it indicates rx flow. */ + #define HWRM_TF_SESSION_RESC_ALLOC_INPUT_FLAGS_DIR_RX UINT32_C(0x0) + /* If this bit is set to 1, then it indicates that tx flow. */ + #define HWRM_TF_SESSION_RESC_ALLOC_INPUT_FLAGS_DIR_TX UINT32_C(0x1) + #define HWRM_TF_SESSION_RESC_ALLOC_INPUT_FLAGS_DIR_LAST \ + HWRM_TF_SESSION_RESC_ALLOC_INPUT_FLAGS_DIR_TX + /* + * Defines the array size of the provided req_addr and + * resv_addr array buffers. Should be set to the number of + * request entries. + */ + uint16_t req_size; + /* + * This is the DMA address for the request input data array + * buffer. Array is of tf_rm_resc_req_entry type. Size of the + * array buffer is provided by the 'req_size' field in this + * message. */ - uint16_t dst_port_mask; + uint64_t req_addr; /* - * This is the ID of the filter that goes along with - * the pri_hint. + * This is the DMA address for the resc output data array + * buffer. Array is of tf_rm_resc_entry type. Size of the array + * buffer is provided by the 'req_size' field in this + * message. */ - uint64_t ntuple_filter_id_hint; -} __attribute__((packed)); + uint64_t resc_addr; +} __rte_packed; -/* hwrm_cfa_ntuple_filter_alloc_output (size:192b/24B) */ -struct hwrm_cfa_ntuple_filter_alloc_output { +/* hwrm_tf_session_resc_alloc_output (size:128b/16B) */ +struct hwrm_tf_session_resc_alloc_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -22959,52 +37192,33 @@ struct hwrm_cfa_ntuple_filter_alloc_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* This value is an opaque id into CFA data structures. */ - uint64_t ntuple_filter_id; /* - * This is the ID of the flow associated with this - * filter. - * This value shall be used to match and associate the - * flow identifier returned in completion records. - * A value of 0xFFFFFFFF shall indicate no flow id. + * Size of the returned tf_rm_resc_entry data array. The value + * cannot exceed the req_size defined by the input msg. The data + * array is returned using the resv_addr specified DMA + * address also provided by the input msg. */ - uint32_t flow_id; - uint8_t unused_0[3]; + uint16_t size; + /* unused. */ + uint8_t unused0[5]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. + * When writing a command completion or response to an internal + * processor, the order of writes has to be such that this field is + * written last. */ uint8_t valid; -} __attribute__((packed)); - -/* hwrm_cfa_ntuple_filter_alloc_cmd_err (size:64b/8B) */ -struct hwrm_cfa_ntuple_filter_alloc_cmd_err { - /* - * command specific error codes that goes to - * the cmd_err field in Common HWRM Error Response. - */ - uint8_t code; - /* Unknown error */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_UNKNOWN \ - UINT32_C(0x0) - /* Unable to complete operation due to conflict with Rx Mask VLAN */ - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_RX_MASK_VLAN_CONFLICT_ERR \ - UINT32_C(0x1) - #define HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_LAST \ - HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_RX_MASK_VLAN_CONFLICT_ERR - uint8_t unused_0[7]; -} __attribute__((packed)); +} __rte_packed; -/******************************* - * hwrm_cfa_ntuple_filter_free * - *******************************/ +/***************************** + * hwrm_tf_session_resc_free * + *****************************/ -/* hwrm_cfa_ntuple_filter_free_input (size:192b/24B) */ -struct hwrm_cfa_ntuple_filter_free_input { +/* hwrm_tf_session_resc_free_input (size:256b/32B) */ +struct hwrm_tf_session_resc_free_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -23021,7 +37235,8 @@ struct hwrm_cfa_ntuple_filter_free_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -23032,12 +37247,34 @@ struct hwrm_cfa_ntuple_filter_free_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* This value is an opaque id into CFA data structures. */ - uint64_t ntuple_filter_id; -} __attribute__((packed)); + /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */ + uint32_t fw_session_id; + /* Control flags. */ + uint16_t flags; + /* Indicates the flow direction. */ + #define HWRM_TF_SESSION_RESC_FREE_INPUT_FLAGS_DIR UINT32_C(0x1) + /* If this bit set to 0, then it indicates rx flow. */ + #define HWRM_TF_SESSION_RESC_FREE_INPUT_FLAGS_DIR_RX UINT32_C(0x0) + /* If this bit is set to 1, then it indicates that tx flow. */ + #define HWRM_TF_SESSION_RESC_FREE_INPUT_FLAGS_DIR_TX UINT32_C(0x1) + #define HWRM_TF_SESSION_RESC_FREE_INPUT_FLAGS_DIR_LAST \ + HWRM_TF_SESSION_RESC_FREE_INPUT_FLAGS_DIR_TX + /* + * Defines the size, in bytes, of the provided free_addr + * buffer. + */ + uint16_t free_size; + /* + * This is the DMA address for the free input data array + * buffer. Array is of tf_rm_resc_entry type. Size of the + * buffer is provided by the 'free_size' field of this + * message. + */ + uint64_t free_addr; +} __rte_packed; -/* hwrm_cfa_ntuple_filter_free_output (size:128b/16B) */ -struct hwrm_cfa_ntuple_filter_free_output { +/* hwrm_tf_session_resc_free_output (size:128b/16B) */ +struct hwrm_tf_session_resc_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -23046,24 +37283,26 @@ struct hwrm_cfa_ntuple_filter_free_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - uint8_t unused_0[7]; + /* unused. */ + uint8_t unused0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. + * When writing a command completion or response to an internal + * processor, the order of writes has to be such that this field is + * written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; /****************************** - * hwrm_cfa_ntuple_filter_cfg * + * hwrm_tf_session_resc_flush * ******************************/ -/* hwrm_cfa_ntuple_filter_cfg_input (size:384b/48B) */ -struct hwrm_cfa_ntuple_filter_cfg_input { +/* hwrm_tf_session_resc_flush_input (size:256b/32B) */ +struct hwrm_tf_session_resc_flush_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -23080,7 +37319,8 @@ struct hwrm_cfa_ntuple_filter_cfg_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -23091,59 +37331,137 @@ struct hwrm_cfa_ntuple_filter_cfg_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - uint32_t enables; - /* - * This bit must be '1' for the new_dst_id field to be - * configured. + /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */ + uint32_t fw_session_id; + /* Control flags. */ + uint16_t flags; + /* Indicates the flow direction. */ + #define HWRM_TF_SESSION_RESC_FLUSH_INPUT_FLAGS_DIR UINT32_C(0x1) + /* If this bit set to 0, then it indicates rx flow. */ + #define HWRM_TF_SESSION_RESC_FLUSH_INPUT_FLAGS_DIR_RX UINT32_C(0x0) + /* If this bit is set to 1, then it indicates that tx flow. */ + #define HWRM_TF_SESSION_RESC_FLUSH_INPUT_FLAGS_DIR_TX UINT32_C(0x1) + #define HWRM_TF_SESSION_RESC_FLUSH_INPUT_FLAGS_DIR_LAST \ + HWRM_TF_SESSION_RESC_FLUSH_INPUT_FLAGS_DIR_TX + /* + * Defines the size, in bytes, of the provided flush_addr + * buffer. */ - #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_DST_ID \ - UINT32_C(0x1) + uint16_t flush_size; /* - * This bit must be '1' for the new_mirror_vnic_id field to be - * configured. + * This is the DMA address for the flush input data array + * buffer. Array of tf_rm_resc_entry type. Size of the + * buffer is provided by the 'flush_size' field in this + * message. */ - #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID \ - UINT32_C(0x2) + uint64_t flush_addr; +} __rte_packed; + +/* hwrm_tf_session_resc_flush_output (size:128b/16B) */ +struct hwrm_tf_session_resc_flush_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* unused. */ + uint8_t unused0[7]; /* - * This bit must be '1' for the new_meter_instance_id field to be - * configured. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal + * processor, the order of writes has to be such that this field is + * written last. */ - #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_METER_INSTANCE_ID \ - UINT32_C(0x4) - uint8_t unused_0[4]; - /* This value is an opaque id into CFA data structures. */ - uint64_t ntuple_filter_id; + uint8_t valid; +} __rte_packed; + +/* TruFlow RM capability of a resource. */ +/* tf_rm_resc_req_entry (size:64b/8B) */ +struct tf_rm_resc_req_entry { + /* Type of the resource, defined globally in HCAPI RM. */ + uint32_t type; + /* Minimum value. */ + uint16_t min; + /* Maximum value. */ + uint16_t max; +} __rte_packed; + +/* TruFlow RM reservation information. */ +/* tf_rm_resc_entry (size:64b/8B) */ +struct tf_rm_resc_entry { + /* Type of the resource, defined globally in HCAPI RM. */ + uint32_t type; + /* Start offset. */ + uint16_t start; + /* Number of resources. */ + uint16_t stride; +} __rte_packed; + +/************************ + * hwrm_tf_tbl_type_get * + ************************/ + + +/* hwrm_tf_tbl_type_get_input (size:256b/32B) */ +struct hwrm_tf_tbl_type_get_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * If set, this value shall represent the new - * Logical VNIC ID of the destination VNIC for the RX - * path and new network port id of the destination port for - * the TX path. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - uint32_t new_dst_id; + uint16_t cmpl_ring; /* - * New Logical VNIC ID of the VNIC where traffic is - * mirrored. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - uint32_t new_mirror_vnic_id; + uint16_t seq_id; /* - * New meter to attach to the flow. Specifying the - * invalid instance ID is used to remove any existing - * meter from the flow. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - uint16_t new_meter_instance_id; + uint16_t target_id; /* - * A value of 0xfff is considered invalid and implies the - * instance is not configured. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_NEW_METER_INSTANCE_ID_INVALID \ - UINT32_C(0xffff) - #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_NEW_METER_INSTANCE_ID_LAST \ - HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_NEW_METER_INSTANCE_ID_INVALID - uint8_t unused_1[6]; -} __attribute__((packed)); - -/* hwrm_cfa_ntuple_filter_cfg_output (size:128b/16B) */ -struct hwrm_cfa_ntuple_filter_cfg_output { + uint64_t resp_addr; + /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */ + uint32_t fw_session_id; + /* Control flags. */ + uint16_t flags; + /* Indicates the flow direction. */ + #define HWRM_TF_TBL_TYPE_GET_INPUT_FLAGS_DIR UINT32_C(0x1) + /* If this bit set to 0, then it indicates rx flow. */ + #define HWRM_TF_TBL_TYPE_GET_INPUT_FLAGS_DIR_RX UINT32_C(0x0) + /* If this bit is set to 1, then it indicates that tx flow. */ + #define HWRM_TF_TBL_TYPE_GET_INPUT_FLAGS_DIR_TX UINT32_C(0x1) + #define HWRM_TF_TBL_TYPE_GET_INPUT_FLAGS_DIR_LAST \ + HWRM_TF_TBL_TYPE_GET_INPUT_FLAGS_DIR_TX + /* unused. */ + uint8_t unused0[2]; + /* + * Type of the resource, defined globally in the + * hwrm_tf_resc_type enum. + */ + uint32_t type; + /* Index of the type to retrieve. */ + uint32_t index; +} __rte_packed; + +/* hwrm_tf_tbl_type_get_output (size:1216b/152B) */ +struct hwrm_tf_tbl_type_get_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -23152,24 +37470,34 @@ struct hwrm_cfa_ntuple_filter_cfg_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - uint8_t unused_0[7]; + /* Response code. */ + uint32_t resp_code; + /* Response size. */ + uint16_t size; + /* unused */ + uint16_t unused0; + /* Response data. */ + uint8_t data[128]; + /* unused */ + uint8_t unused1[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. + * When writing a command completion or response to an internal + * processor, the order of writes has to be such that this field + * is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/************************** - * hwrm_cfa_em_flow_alloc * - **************************/ +/************************ + * hwrm_tf_tbl_type_set * + ************************/ -/* hwrm_cfa_em_flow_alloc_input (size:896b/112B) */ -struct hwrm_cfa_em_flow_alloc_input { +/* hwrm_tf_tbl_type_set_input (size:1024b/128B) */ +struct hwrm_tf_tbl_type_set_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -23186,7 +37514,8 @@ struct hwrm_cfa_em_flow_alloc_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -23197,307 +37526,585 @@ struct hwrm_cfa_em_flow_alloc_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - uint32_t flags; - /* - * Enumeration denoting the RX, TX type of the resource. - * This enumeration is used for resources that are similar for both - * TX and RX paths of the chip. - */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH UINT32_C(0x1) - /* tx path */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_TX UINT32_C(0x0) - /* rx path */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_RX UINT32_C(0x1) - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_LAST \ - HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_RX - /* - * Setting of this flag indicates enabling of a byte counter for a given - * flow. - */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_BYTE_CTR UINT32_C(0x2) - /* - * Setting of this flag indicates enabling of a packet counter for a given - * flow. - */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PKT_CTR UINT32_C(0x4) - /* Setting of this flag indicates de-capsulation action for the given flow. */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_DECAP UINT32_C(0x8) - /* Setting of this flag indicates encapsulation action for the given flow. */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_ENCAP UINT32_C(0x10) + /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */ + uint32_t fw_session_id; + /* Control flags. */ + uint16_t flags; + /* Indicates the flow direction. */ + #define HWRM_TF_TBL_TYPE_SET_INPUT_FLAGS_DIR UINT32_C(0x1) + /* If this bit set to 0, then it indicates rx flow. */ + #define HWRM_TF_TBL_TYPE_SET_INPUT_FLAGS_DIR_RX UINT32_C(0x0) + /* If this bit is set to 1, then it indicates that tx flow. */ + #define HWRM_TF_TBL_TYPE_SET_INPUT_FLAGS_DIR_TX UINT32_C(0x1) + #define HWRM_TF_TBL_TYPE_SET_INPUT_FLAGS_DIR_LAST \ + HWRM_TF_TBL_TYPE_SET_INPUT_FLAGS_DIR_TX + /* unused. */ + uint8_t unused0[2]; + /* + * Type of the resource, defined globally in the + * hwrm_tf_resc_type enum. + */ + uint32_t type; + /* Index of the type to retrieve. */ + uint32_t index; + /* Size of the data to set. */ + uint16_t size; + /* unused */ + uint8_t unused1[6]; + /* Data to be set. */ + uint8_t data[88]; +} __rte_packed; + +/* hwrm_tf_tbl_type_set_output (size:128b/16B) */ +struct hwrm_tf_tbl_type_set_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* unused. */ + uint8_t unused0[7]; /* - * Setting of this flag indicates drop action. If this flag is not set, - * then it should be considered accept action. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal + * processor, the order of writes has to be such that this field + * is written last. */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_DROP UINT32_C(0x20) + uint8_t valid; +} __rte_packed; + +/************************* + * hwrm_tf_ctxt_mem_rgtr * + *************************/ + + +/* hwrm_tf_ctxt_mem_rgtr_input (size:256b/32B) */ +struct hwrm_tf_ctxt_mem_rgtr_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * Setting of this flag indicates that a meter is expected to be attached - * to this flow. This hint can be used when choosing the action record - * format required for the flow. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_METER UINT32_C(0x40) - uint32_t enables; + uint16_t cmpl_ring; /* - * This bit must be '1' for the l2_filter_id field to be - * configured. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_L2_FILTER_ID \ - UINT32_C(0x1) + uint16_t seq_id; /* - * This bit must be '1' for the tunnel_type field to be - * configured. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \ - UINT32_C(0x2) + uint16_t target_id; /* - * This bit must be '1' for the tunnel_id field to be - * configured. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_TUNNEL_ID \ - UINT32_C(0x4) + uint64_t resp_addr; + /* Control flags. */ + uint16_t flags; + /* Counter PBL indirect levels. */ + uint8_t page_level; + /* PBL pointer is physical start address. */ + #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1) /* - * This bit must be '1' for the src_macaddr field to be - * configured. + * PBL pointer points to PDE table with each entry pointing + * to PTE tables. */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_MACADDR \ - UINT32_C(0x8) + #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2) + #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_LEVEL_LAST \ + HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_2 + /* Page size. */ + uint8_t page_size; + /* 4KB page size. */ + #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_4K UINT32_C(0x0) + /* 8KB page size. */ + #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_8K UINT32_C(0x1) + /* 64KB page size. */ + #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_64K UINT32_C(0x4) + /* 256KB page size. */ + #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_256K UINT32_C(0x6) + /* 1MB page size. */ + #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_1M UINT32_C(0x8) + /* 2MB page size. */ + #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_2M UINT32_C(0x9) + /* 4MB page size. */ + #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_4M UINT32_C(0xa) + /* 1GB page size. */ + #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_1G UINT32_C(0x12) + #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_LAST \ + HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_1G + /* unused. */ + uint32_t unused0; + /* Pointer to the PBL, or PDL depending on number of levels */ + uint64_t page_dir; +} __rte_packed; + +/* hwrm_tf_ctxt_mem_rgtr_output (size:128b/16B) */ +struct hwrm_tf_ctxt_mem_rgtr_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; /* - * This bit must be '1' for the dst_macaddr field to be - * configured. + * Id/Handle to the recently register context memory. This + * handle is passed to the TF session. */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_MACADDR \ - UINT32_C(0x10) + uint16_t ctx_id; + /* unused. */ + uint8_t unused0[5]; /* - * This bit must be '1' for the ovlan_vid field to be - * configured. + * This field is used in Output records to indicate that the + * output is completely written to RAM. This field should be + * read as '1' to indicate that the output has been + * completely written. When writing a command completion or + * response to an internal processor, the order of writes has + * to be such that this field is written last. */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_OVLAN_VID \ - UINT32_C(0x20) + uint8_t valid; +} __rte_packed; + +/*************************** + * hwrm_tf_ctxt_mem_unrgtr * + ***************************/ + + +/* hwrm_tf_ctxt_mem_unrgtr_input (size:192b/24B) */ +struct hwrm_tf_ctxt_mem_unrgtr_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * This bit must be '1' for the ivlan_vid field to be - * configured. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IVLAN_VID \ - UINT32_C(0x40) + uint16_t cmpl_ring; /* - * This bit must be '1' for the ethertype field to be - * configured. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_ETHERTYPE \ - UINT32_C(0x80) + uint16_t seq_id; /* - * This bit must be '1' for the src_ipaddr field to be - * configured. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_IPADDR \ - UINT32_C(0x100) + uint16_t target_id; /* - * This bit must be '1' for the dst_ipaddr field to be - * configured. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_IPADDR \ - UINT32_C(0x200) + uint64_t resp_addr; /* - * This bit must be '1' for the ipaddr_type field to be - * configured. + * Id/Handle to the recently register context memory. This + * handle is passed to the TF session. */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IPADDR_TYPE \ - UINT32_C(0x400) + uint16_t ctx_id; + /* unused. */ + uint8_t unused0[6]; +} __rte_packed; + +/* hwrm_tf_ctxt_mem_unrgtr_output (size:128b/16B) */ +struct hwrm_tf_ctxt_mem_unrgtr_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* unused. */ + uint8_t unused0[7]; /* - * This bit must be '1' for the ip_protocol field to be - * configured. + * This field is used in Output records to indicate that the + * output is completely written to RAM. This field should be + * read as '1' to indicate that the output has been + * completely written. When writing a command completion or + * response to an internal processor, the order of writes has + * to be such that this field is written last. */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IP_PROTOCOL \ - UINT32_C(0x800) + uint8_t valid; +} __rte_packed; + +/************************ + * hwrm_tf_ext_em_qcaps * + ************************/ + + +/* hwrm_tf_ext_em_qcaps_input (size:192b/24B) */ +struct hwrm_tf_ext_em_qcaps_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * This bit must be '1' for the src_port field to be - * configured. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_PORT \ - UINT32_C(0x1000) + uint16_t cmpl_ring; /* - * This bit must be '1' for the dst_port field to be - * configured. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_PORT \ - UINT32_C(0x2000) + uint16_t seq_id; /* - * This bit must be '1' for the dst_id field to be - * configured. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_ID \ - UINT32_C(0x4000) + uint16_t target_id; /* - * This bit must be '1' for the mirror_vnic_id field to be - * configured. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \ - UINT32_C(0x8000) + uint64_t resp_addr; + /* Control flags. */ + uint32_t flags; + /* Indicates the flow direction. */ + #define HWRM_TF_EXT_EM_QCAPS_INPUT_FLAGS_DIR \ + UINT32_C(0x1) + /* If this bit set to 0, then it indicates rx flow. */ + #define HWRM_TF_EXT_EM_QCAPS_INPUT_FLAGS_DIR_RX \ + UINT32_C(0x0) + /* If this bit is set to 1, then it indicates that tx flow. */ + #define HWRM_TF_EXT_EM_QCAPS_INPUT_FLAGS_DIR_TX \ + UINT32_C(0x1) + #define HWRM_TF_EXT_EM_QCAPS_INPUT_FLAGS_DIR_LAST \ + HWRM_TF_EXT_EM_QCAPS_INPUT_FLAGS_DIR_TX + /* When set to 1, all offloaded flows will be sent to EXT EM. */ + #define HWRM_TF_EXT_EM_QCAPS_INPUT_FLAGS_PREFERRED_OFFLOAD \ + UINT32_C(0x2) + /* unused. */ + uint32_t unused0; +} __rte_packed; + +/* hwrm_tf_ext_em_qcaps_output (size:320b/40B) */ +struct hwrm_tf_ext_em_qcaps_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint32_t flags; /* - * This bit must be '1' for the encap_record_id field to be - * configured. + * When set to 1, indicates the the FW supports the Centralized + * Memory Model. The concept designates one entity for the + * memory allocation while all others ‘subscribe’ to it. */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_ENCAP_RECORD_ID \ - UINT32_C(0x10000) + #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_FLAGS_CENTRALIZED_MEMORY_MODEL_SUPPORTED \ + UINT32_C(0x1) /* - * This bit must be '1' for the meter_instance_id field to be - * configured. + * When set to 1, indicates the the FW supports the Detached + * Centralized Memory Model. The memory is allocated and managed + * as a separate entity. All PFs and VFs will be granted direct + * or semi-direct access to the allocated memory while none of + * which can interfere with the management of the memory. */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_METER_INSTANCE_ID \ - UINT32_C(0x20000) + #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_FLAGS_DETACHED_CENTRALIZED_MEMORY_MODEL_SUPPORTED \ + UINT32_C(0x2) + /* unused. */ + uint32_t unused0; + /* Support flags. */ + uint32_t supported; /* - * This value identifies a set of CFA data structures used for an L2 - * context. + * If set to 1, then EXT EM KEY0 table is supported using + * crc32 hash. + * If set to 0, EXT EM KEY0 table is not supported. */ - uint64_t l2_filter_id; - /* Tunnel Type. */ - uint8_t tunnel_type; - /* Non-tunnel */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \ - UINT32_C(0x0) - /* Virtual eXtensible Local Area Network (VXLAN) */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \ + #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_SUPPORTED_KEY0_TABLE \ UINT32_C(0x1) - /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \ + /* + * If set to 1, then EXT EM KEY1 table is supported using + * lookup3 hash. + * If set to 0, EXT EM KEY1 table is not supported. + */ + #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_SUPPORTED_KEY1_TABLE \ UINT32_C(0x2) - /* Generic Routing Encapsulation (GRE) inside Ethernet payload */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \ - UINT32_C(0x3) - /* IP in IP */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPIP \ + /* + * If set to 1, then EXT EM External Record table is supported. + * If set to 0, EXT EM External Record table is not + * supported. (This table includes action record, EFC + * pointers, encap pointers) + */ + #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_SUPPORTED_EXTERNAL_RECORD_TABLE \ UINT32_C(0x4) - /* Generic Network Virtualization Encapsulation (Geneve) */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \ - UINT32_C(0x5) - /* Multi-Protocol Lable Switching (MPLS) */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_MPLS \ - UINT32_C(0x6) - /* Stateless Transport Tunnel (STT) */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_STT \ - UINT32_C(0x7) - /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \ + /* + * If set to 1, then EXT EM External Flow Counters table is + * supported. + * If set to 0, EXT EM External Flow Counters table is not + * supported. + */ + #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_SUPPORTED_EXTERNAL_FLOW_COUNTERS_TABLE \ UINT32_C(0x8) - /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \ - UINT32_C(0x9) - /* Any tunneled traffic */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \ - UINT32_C(0xff) - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_LAST \ - HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL - uint8_t unused_0[3]; /* - * Tunnel identifier. - * Virtual Network Identifier (VNI). Only valid with - * tunnel_types VXLAN, NVGRE, and Geneve. - * Only lower 24-bits of VNI field are used - * in setting up the filter. + * If set to 1, then FID table used for implicit flow flush + * is supported. + * If set to 0, then FID table used for implicit flow flush + * is not supported. */ - uint32_t tunnel_id; + #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_SUPPORTED_FID_TABLE \ + UINT32_C(0x10) /* - * This value indicates the source MAC address in - * the Ethernet header. + * The maximum number of entries supported by EXT EM. When + * configuring the host memory the number of numbers of + * entries that can supported are - + * 32k, 64k 128k, 256k, 512k, 1M, 2M, 4M, 8M, 32M, 64M, + * 128M entries. + * Any value that are not these values, the FW will round + * down to the closest support number of entries. */ - uint8_t src_macaddr[6]; - /* The meter instance to attach to the flow. */ - uint16_t meter_instance_id; + uint32_t max_entries_supported; /* - * A value of 0xfff is considered invalid and implies the - * instance is not configured. + * The entry size in bytes of each entry in the EXT EM + * KEY0/KEY1 tables. */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_METER_INSTANCE_ID_INVALID \ - UINT32_C(0xffff) - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_METER_INSTANCE_ID_LAST \ - HWRM_CFA_EM_FLOW_ALLOC_INPUT_METER_INSTANCE_ID_INVALID + uint16_t key_entry_size; /* - * This value indicates the destination MAC address in - * the Ethernet header. + * The entry size in bytes of each entry in the EXT EM RECORD + * tables. */ - uint8_t dst_macaddr[6]; + uint16_t record_entry_size; + /* The entry size in bytes of each entry in the EXT EM EFC tables. */ + uint16_t efc_entry_size; + /* The FID size in bytes of each entry in the EXT EM FID tables. */ + uint16_t fid_entry_size; + /* unused. */ + uint8_t unused1[7]; /* - * This value indicates the VLAN ID of the outer VLAN tag - * in the Ethernet header. + * This field is used in Output records to indicate that the + * output is completely written to RAM. This field should be + * read as '1' to indicate that the output has been + * completely written. When writing a command completion or + * response to an internal processor, the order of writes has + * to be such that this field is written last. */ - uint16_t ovlan_vid; + uint8_t valid; +} __rte_packed; + +/********************* + * hwrm_tf_ext_em_op * + *********************/ + + +/* hwrm_tf_ext_em_op_input (size:192b/24B) */ +struct hwrm_tf_ext_em_op_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * This value indicates the VLAN ID of the inner VLAN tag - * in the Ethernet header. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - uint16_t ivlan_vid; - /* This value indicates the ethertype in the Ethernet header. */ - uint16_t ethertype; + uint16_t cmpl_ring; /* - * This value indicates the type of IP address. - * 4 - IPv4 - * 6 - IPv6 - * All others are invalid. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - uint8_t ip_addr_type; - /* invalid */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_UNKNOWN UINT32_C(0x0) - /* IPv4 */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_IPV4 UINT32_C(0x4) - /* IPv6 */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 UINT32_C(0x6) - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_LAST \ - HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 + uint16_t seq_id; /* - * The value of protocol filed in IP header. - * Applies to UDP and TCP traffic. - * 6 - TCP - * 17 - UDP + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - uint8_t ip_protocol; - /* invalid */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UNKNOWN UINT32_C(0x0) - /* TCP */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_TCP UINT32_C(0x6) - /* UDP */ - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UDP UINT32_C(0x11) - #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_LAST \ - HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UDP - uint8_t unused_1[2]; + uint16_t target_id; /* - * The value of source IP address to be used in filtering. - * For IPv4, first four bytes represent the IP address. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - uint32_t src_ipaddr[4]; + uint64_t resp_addr; + /* Control flags. */ + uint16_t flags; + /* Indicates the flow direction. */ + #define HWRM_TF_EXT_EM_OP_INPUT_FLAGS_DIR UINT32_C(0x1) + /* If this bit set to 0, then it indicates rx flow. */ + #define HWRM_TF_EXT_EM_OP_INPUT_FLAGS_DIR_RX UINT32_C(0x0) + /* If this bit is set to 1, then it indicates that tx flow. */ + #define HWRM_TF_EXT_EM_OP_INPUT_FLAGS_DIR_TX UINT32_C(0x1) + #define HWRM_TF_EXT_EM_OP_INPUT_FLAGS_DIR_LAST \ + HWRM_TF_EXT_EM_OP_INPUT_FLAGS_DIR_TX + /* unused. */ + uint16_t unused0; + /* The number of EXT EM key table entries to be configured. */ + uint16_t op; + /* This value is reserved and should not be used. */ + #define HWRM_TF_EXT_EM_OP_INPUT_OP_RESERVED UINT32_C(0x0) + /* + * To properly stop EXT EM and ensure there are no DMA's, + * the caller must disable EXT EM for the given PF, using + * this call. This will safely disable EXT EM and ensure + * that all DMA'ed to the keys/records/efc have been + * completed. + */ + #define HWRM_TF_EXT_EM_OP_INPUT_OP_EXT_EM_DISABLE UINT32_C(0x1) + /* + * Once the EXT EM host memory has been configured, EXT EM + * options have been configured. Then the caller should + * enable EXT EM for the given PF. Note once this call has + * been made, then the EXT EM mechanism will be active and + * DMA's will occur as packets are processed. + */ + #define HWRM_TF_EXT_EM_OP_INPUT_OP_EXT_EM_ENABLE UINT32_C(0x2) + /* + * Clear EXT EM settings for the given PF so that the + * register values are reset back to their initial state. + */ + #define HWRM_TF_EXT_EM_OP_INPUT_OP_EXT_EM_CLEANUP UINT32_C(0x3) + #define HWRM_TF_EXT_EM_OP_INPUT_OP_LAST \ + HWRM_TF_EXT_EM_OP_INPUT_OP_EXT_EM_CLEANUP + /* unused. */ + uint16_t unused1; +} __rte_packed; + +/* hwrm_tf_ext_em_op_output (size:128b/16B) */ +struct hwrm_tf_ext_em_op_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* unused. */ + uint8_t unused0[7]; /* - * big_endian = True - * The value of destination IP address to be used in filtering. - * For IPv4, first four bytes represent the IP address. + * This field is used in Output records to indicate that the + * output is completely written to RAM. This field should be + * read as '1' to indicate that the output has been + * completely written. When writing a command completion or + * response to an internal processor, the order of writes has + * to be such that this field is written last. */ - uint32_t dst_ipaddr[4]; + uint8_t valid; +} __rte_packed; + +/********************** + * hwrm_tf_ext_em_cfg * + **********************/ + + +/* hwrm_tf_ext_em_cfg_input (size:384b/48B) */ +struct hwrm_tf_ext_em_cfg_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * The value of source port to be used in filtering. - * Applies to UDP and TCP traffic. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - uint16_t src_port; + uint16_t cmpl_ring; /* - * The value of destination port to be used in filtering. - * Applies to UDP and TCP traffic. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - uint16_t dst_port; + uint16_t seq_id; /* - * If set, this value shall represent the - * Logical VNIC ID of the destination VNIC for the RX - * path and network port id of the destination port for - * the TX path. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - uint16_t dst_id; + uint16_t target_id; /* - * Logical VNIC ID of the VNIC where traffic is - * mirrored. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - uint16_t mirror_vnic_id; - /* Logical ID of the encapsulation record. */ - uint32_t encap_record_id; - uint8_t unused_2[4]; -} __attribute__((packed)); + uint64_t resp_addr; + /* Control flags. */ + uint32_t flags; + /* Indicates the flow direction. */ + #define HWRM_TF_EXT_EM_CFG_INPUT_FLAGS_DIR \ + UINT32_C(0x1) + /* If this bit set to 0, then it indicates rx flow. */ + #define HWRM_TF_EXT_EM_CFG_INPUT_FLAGS_DIR_RX \ + UINT32_C(0x0) + /* If this bit is set to 1, then it indicates that tx flow. */ + #define HWRM_TF_EXT_EM_CFG_INPUT_FLAGS_DIR_TX \ + UINT32_C(0x1) + #define HWRM_TF_EXT_EM_CFG_INPUT_FLAGS_DIR_LAST \ + HWRM_TF_EXT_EM_CFG_INPUT_FLAGS_DIR_TX + /* When set to 1, all offloaded flows will be sent to EXT EM. */ + #define HWRM_TF_EXT_EM_CFG_INPUT_FLAGS_PREFERRED_OFFLOAD \ + UINT32_C(0x2) + /* When set to 1, secondary, 0 means primary. */ + #define HWRM_TF_EXT_EM_CFG_INPUT_FLAGS_SECONDARY_PF \ + UINT32_C(0x4) + /* + * Group_id which used by Firmware to identify memory pools belonging + * to certain group. + */ + uint16_t group_id; + /* + * Dynamically reconfigure EEM pending cache every 1/10th of second. + * If set to 0 it will disable the EEM HW flush of the pending cache. + */ + uint8_t flush_interval; + /* unused. */ + uint8_t unused0; + /* + * Configured EXT EM with the given number of entries. All + * the EXT EM tables KEY0, KEY1, RECORD, EFC all have the + * same number of entries and all tables will be configured + * using this value. Current minimum value is 32k. Current + * maximum value is 128M. + */ + uint32_t num_entries; + /* unused. */ + uint32_t unused1; + /* Configured EXT EM with the given context if for KEY0 table. */ + uint16_t key0_ctx_id; + /* Configured EXT EM with the given context if for KEY1 table. */ + uint16_t key1_ctx_id; + /* Configured EXT EM with the given context if for RECORD table. */ + uint16_t record_ctx_id; + /* Configured EXT EM with the given context if for EFC table. */ + uint16_t efc_ctx_id; + /* Configured EXT EM with the given context if for EFC table. */ + uint16_t fid_ctx_id; + /* unused. */ + uint16_t unused2; + /* unused. */ + uint32_t unused3; +} __rte_packed; -/* hwrm_cfa_em_flow_alloc_output (size:192b/24B) */ -struct hwrm_cfa_em_flow_alloc_output { +/* hwrm_tf_ext_em_cfg_output (size:128b/16B) */ +struct hwrm_tf_ext_em_cfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -23506,34 +38113,26 @@ struct hwrm_cfa_em_flow_alloc_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* This value is an opaque id into CFA data structures. */ - uint64_t em_filter_id; + /* unused. */ + uint8_t unused0[7]; /* - * This is the ID of the flow associated with this - * filter. - * This value shall be used to match and associate the - * flow identifier returned in completion records. - * A value of 0xFFFFFFFF shall indicate no flow id. - */ - uint32_t flow_id; - uint8_t unused_0[3]; - /* - * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' - * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. + * This field is used in Output records to indicate that the + * output is completely written to RAM. This field should be + * read as '1' to indicate that the output has been + * completely written. When writing a command completion or + * response to an internal processor, the order of writes has + * to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/************************* - * hwrm_cfa_em_flow_free * - *************************/ +/*********************** + * hwrm_tf_ext_em_qcfg * + ***********************/ -/* hwrm_cfa_em_flow_free_input (size:192b/24B) */ -struct hwrm_cfa_em_flow_free_input { +/* hwrm_tf_ext_em_qcfg_input (size:192b/24B) */ +struct hwrm_tf_ext_em_qcfg_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -23550,7 +38149,8 @@ struct hwrm_cfa_em_flow_free_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -23561,12 +38161,22 @@ struct hwrm_cfa_em_flow_free_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* This value is an opaque id into CFA data structures. */ - uint64_t em_filter_id; -} __attribute__((packed)); + /* Control flags. */ + uint32_t flags; + /* Indicates the flow direction. */ + #define HWRM_TF_EXT_EM_QCFG_INPUT_FLAGS_DIR UINT32_C(0x1) + /* If this bit set to 0, then it indicates rx flow. */ + #define HWRM_TF_EXT_EM_QCFG_INPUT_FLAGS_DIR_RX UINT32_C(0x0) + /* If this bit is set to 1, then it indicates that tx flow. */ + #define HWRM_TF_EXT_EM_QCFG_INPUT_FLAGS_DIR_TX UINT32_C(0x1) + #define HWRM_TF_EXT_EM_QCFG_INPUT_FLAGS_DIR_LAST \ + HWRM_TF_EXT_EM_QCFG_INPUT_FLAGS_DIR_TX + /* unused. */ + uint32_t unused0; +} __rte_packed; -/* hwrm_cfa_em_flow_free_output (size:128b/16B) */ -struct hwrm_cfa_em_flow_free_output { +/* hwrm_tf_ext_em_qcfg_output (size:256b/32B) */ +struct hwrm_tf_ext_em_qcfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -23575,24 +38185,54 @@ struct hwrm_cfa_em_flow_free_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - uint8_t unused_0[7]; - /* - * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' - * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. + /* Control flags. */ + uint32_t flags; + /* Indicates the flow direction. */ + #define HWRM_TF_EXT_EM_QCFG_OUTPUT_FLAGS_DIR \ + UINT32_C(0x1) + /* If this bit set to 0, then it indicates rx flow. */ + #define HWRM_TF_EXT_EM_QCFG_OUTPUT_FLAGS_DIR_RX \ + UINT32_C(0x0) + /* If this bit is set to 1, then it indicates that tx flow. */ + #define HWRM_TF_EXT_EM_QCFG_OUTPUT_FLAGS_DIR_TX \ + UINT32_C(0x1) + #define HWRM_TF_EXT_EM_QCFG_OUTPUT_FLAGS_DIR_LAST \ + HWRM_TF_EXT_EM_QCFG_OUTPUT_FLAGS_DIR_TX + /* When set to 1, all offloaded flows will be sent to EXT EM. */ + #define HWRM_TF_EXT_EM_QCFG_OUTPUT_FLAGS_PREFERRED_OFFLOAD \ + UINT32_C(0x2) + /* The number of entries the FW has configured for EXT EM. */ + uint32_t num_entries; + /* Configured EXT EM with the given context if for KEY0 table. */ + uint16_t key0_ctx_id; + /* Configured EXT EM with the given context if for KEY1 table. */ + uint16_t key1_ctx_id; + /* Configured EXT EM with the given context if for RECORD table. */ + uint16_t record_ctx_id; + /* Configured EXT EM with the given context if for EFC table. */ + uint16_t efc_ctx_id; + /* Configured EXT EM with the given context if for EFC table. */ + uint16_t fid_ctx_id; + /* unused. */ + uint8_t unused0[5]; + /* + * This field is used in Output records to indicate that the + * output is completely written to RAM. This field should be + * read as '1' to indicate that the output has been + * completely written. When writing a command completion or + * response to an internal processor, the order of writes has + * to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/******************************* - * hwrm_cfa_decap_filter_alloc * - *******************************/ +/********************* + * hwrm_tf_em_insert * + *********************/ -/* hwrm_cfa_decap_filter_alloc_input (size:832b/104B) */ -struct hwrm_cfa_decap_filter_alloc_input { +/* hwrm_tf_em_insert_input (size:832b/104B) */ +struct hwrm_tf_em_insert_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -23609,7 +38249,8 @@ struct hwrm_cfa_decap_filter_alloc_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -23620,266 +38261,632 @@ struct hwrm_cfa_decap_filter_alloc_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - uint32_t flags; - /* ovs_tunnel is 1 b */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_FLAGS_OVS_TUNNEL \ - UINT32_C(0x1) - uint32_t enables; + /* Firmware Session Id. */ + uint32_t fw_session_id; + /* Control Flags. */ + uint16_t flags; + /* Indicates the flow direction. */ + #define HWRM_TF_EM_INSERT_INPUT_FLAGS_DIR UINT32_C(0x1) + /* If this bit set to 0, then it indicates rx flow. */ + #define HWRM_TF_EM_INSERT_INPUT_FLAGS_DIR_RX UINT32_C(0x0) + /* If this bit is set to 1, then it indicates that tx flow. */ + #define HWRM_TF_EM_INSERT_INPUT_FLAGS_DIR_TX UINT32_C(0x1) + #define HWRM_TF_EM_INSERT_INPUT_FLAGS_DIR_LAST \ + HWRM_TF_EM_INSERT_INPUT_FLAGS_DIR_TX + /* Reported match strength. */ + uint16_t strength; + /* Index to action. */ + uint32_t action_ptr; + /* Index of EM record. */ + uint32_t em_record_idx; + /* EM Key value. */ + uint64_t em_key[8]; + /* Number of bits in em_key. */ + uint16_t em_key_bitlen; + /* unused. */ + uint16_t unused0[3]; +} __rte_packed; + +/* hwrm_tf_em_insert_output (size:128b/16B) */ +struct hwrm_tf_em_insert_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* EM record pointer index. */ + uint16_t rptr_index; + /* EM record offset 0~3. */ + uint8_t rptr_entry; + /* Number of word entries consumed by the key. */ + uint8_t num_of_entries; + /* unused. */ + uint32_t unused0; +} __rte_packed; + +/********************* + * hwrm_tf_em_delete * + *********************/ + + +/* hwrm_tf_em_delete_input (size:832b/104B) */ +struct hwrm_tf_em_delete_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * This bit must be '1' for the tunnel_type field to be - * configured. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \ - UINT32_C(0x1) + uint16_t cmpl_ring; /* - * This bit must be '1' for the tunnel_id field to be - * configured. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_ID \ - UINT32_C(0x2) + uint16_t seq_id; /* - * This bit must be '1' for the src_macaddr field to be - * configured. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_SRC_MACADDR \ - UINT32_C(0x4) + uint16_t target_id; /* - * This bit must be '1' for the dst_macaddr field to be - * configured. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_DST_MACADDR \ - UINT32_C(0x8) + uint64_t resp_addr; + /* Session Id. */ + uint32_t fw_session_id; + /* Control flags. */ + uint16_t flags; + /* Indicates the flow direction. */ + #define HWRM_TF_EM_DELETE_INPUT_FLAGS_DIR UINT32_C(0x1) + /* If this bit set to 0, then it indicates rx flow. */ + #define HWRM_TF_EM_DELETE_INPUT_FLAGS_DIR_RX UINT32_C(0x0) + /* If this bit is set to 1, then it indicates that tx flow. */ + #define HWRM_TF_EM_DELETE_INPUT_FLAGS_DIR_TX UINT32_C(0x1) + #define HWRM_TF_EM_DELETE_INPUT_FLAGS_DIR_LAST \ + HWRM_TF_EM_DELETE_INPUT_FLAGS_DIR_TX + /* Unused0 */ + uint16_t unused0; + /* EM internal flow hanndle. */ + uint64_t flow_handle; + /* EM Key value */ + uint64_t em_key[8]; + /* Number of bits in em_key. */ + uint16_t em_key_bitlen; + /* unused. */ + uint16_t unused1[3]; +} __rte_packed; + +/* hwrm_tf_em_delete_output (size:128b/16B) */ +struct hwrm_tf_em_delete_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* Original stack allocation index. */ + uint16_t em_index; + /* unused. */ + uint16_t unused0[3]; +} __rte_packed; + +/******************** + * hwrm_tf_tcam_set * + ********************/ + + +/* hwrm_tf_tcam_set_input (size:1024b/128B) */ +struct hwrm_tf_tcam_set_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * This bit must be '1' for the ovlan_vid field to be - * configured. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_OVLAN_VID \ - UINT32_C(0x10) + uint16_t cmpl_ring; /* - * This bit must be '1' for the ivlan_vid field to be - * configured. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_IVLAN_VID \ - UINT32_C(0x20) + uint16_t seq_id; /* - * This bit must be '1' for the t_ovlan_vid field to be - * configured. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_T_OVLAN_VID \ - UINT32_C(0x40) + uint16_t target_id; /* - * This bit must be '1' for the t_ivlan_vid field to be - * configured. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_T_IVLAN_VID \ - UINT32_C(0x80) + uint64_t resp_addr; + /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */ + uint32_t fw_session_id; + /* Control flags. */ + uint32_t flags; + /* Indicates the flow direction. */ + #define HWRM_TF_TCAM_SET_INPUT_FLAGS_DIR UINT32_C(0x1) + /* If this bit set to 0, then it indicates rx flow. */ + #define HWRM_TF_TCAM_SET_INPUT_FLAGS_DIR_RX UINT32_C(0x0) + /* If this bit is set to 1, then it indicates that tx flow. */ + #define HWRM_TF_TCAM_SET_INPUT_FLAGS_DIR_TX UINT32_C(0x1) + #define HWRM_TF_TCAM_SET_INPUT_FLAGS_DIR_LAST \ + HWRM_TF_TCAM_SET_INPUT_FLAGS_DIR_TX + /* + * Indicate device data is being sent via DMA, the device + * data is packing does not change. + */ + #define HWRM_TF_TCAM_SET_INPUT_FLAGS_DMA UINT32_C(0x2) + /* + * TCAM type of the resource, defined globally in the + * hwrm_tf_resc_type enum. + */ + uint32_t type; + /* Index of TCAM entry. */ + uint16_t idx; + /* Number of bytes in the TCAM key. */ + uint8_t key_size; + /* Number of bytes in the TCAM result. */ + uint8_t result_size; + /* + * Offset from which the mask bytes start in the device data + * array, key offset is always 0. + */ + uint8_t mask_offset; + /* Offset from which the result bytes start in the device data array. */ + uint8_t result_offset; + /* unused. */ + uint8_t unused0[6]; + /* + * TCAM key located at offset 0, mask located at mask_offsec + * and result at result_offsec for the device. + */ + uint8_t dev_data[88]; +} __rte_packed; + +/* hwrm_tf_tcam_set_output (size:128b/16B) */ +struct hwrm_tf_tcam_set_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* unused. */ + uint8_t unused0[7]; /* - * This bit must be '1' for the ethertype field to be - * configured. + * This field is used in Output records to indicate that the + * output is completely written to RAM. This field should be + * read as '1' to indicate that the output has been + * completely written. When writing a command completion or + * response to an internal processor, the order of writes has + * to be such that this field is written last. */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_ETHERTYPE \ - UINT32_C(0x100) + uint8_t valid; +} __rte_packed; + +/******************** + * hwrm_tf_tcam_get * + ********************/ + + +/* hwrm_tf_tcam_get_input (size:256b/32B) */ +struct hwrm_tf_tcam_get_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * This bit must be '1' for the src_ipaddr field to be - * configured. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_SRC_IPADDR \ - UINT32_C(0x200) + uint16_t cmpl_ring; /* - * This bit must be '1' for the dst_ipaddr field to be - * configured. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_DST_IPADDR \ - UINT32_C(0x400) + uint16_t seq_id; /* - * This bit must be '1' for the ipaddr_type field to be - * configured. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_IPADDR_TYPE \ - UINT32_C(0x800) + uint16_t target_id; /* - * This bit must be '1' for the ip_protocol field to be - * configured. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_IP_PROTOCOL \ - UINT32_C(0x1000) + uint64_t resp_addr; + /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */ + uint32_t fw_session_id; + /* Control flags. */ + uint32_t flags; + /* Indicates the flow direction. */ + #define HWRM_TF_TCAM_GET_INPUT_FLAGS_DIR UINT32_C(0x1) + /* If this bit set to 0, then it indicates rx flow. */ + #define HWRM_TF_TCAM_GET_INPUT_FLAGS_DIR_RX UINT32_C(0x0) + /* If this bit is set to 1, then it indicates that tx flow. */ + #define HWRM_TF_TCAM_GET_INPUT_FLAGS_DIR_TX UINT32_C(0x1) + #define HWRM_TF_TCAM_GET_INPUT_FLAGS_DIR_LAST \ + HWRM_TF_TCAM_GET_INPUT_FLAGS_DIR_TX + /* + * TCAM type of the resource, defined globally in the + * hwrm_tf_resc_type enum. + */ + uint32_t type; + /* Index of a TCAM entry. */ + uint16_t idx; + /* unused. */ + uint16_t unused0; +} __rte_packed; + +/* hwrm_tf_tcam_get_output (size:2368b/296B) */ +struct hwrm_tf_tcam_get_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* Number of bytes in the TCAM key. */ + uint8_t key_size; + /* Number of bytes in the TCAM entry. */ + uint8_t result_size; + /* Offset from which the mask bytes start in the device data array. */ + uint8_t mask_offset; + /* Offset from which the result bytes start in the device data array. */ + uint8_t result_offset; + /* unused. */ + uint8_t unused0[4]; + /* + * TCAM key located at offset 0, mask located at mask_offsec + * and result at result_offsec for the device. + */ + uint8_t dev_data[272]; + /* unused. */ + uint8_t unused1[7]; + /* + * This field is used in Output records to indicate that the + * output is completely written to RAM. This field should be + * read as '1' to indicate that the output has been + * completely written. When writing a command completion or + * response to an internal processor, the order of writes has + * to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; + +/********************* + * hwrm_tf_tcam_move * + *********************/ + + +/* hwrm_tf_tcam_move_input (size:1024b/128B) */ +struct hwrm_tf_tcam_move_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * This bit must be '1' for the src_port field to be - * configured. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_SRC_PORT \ - UINT32_C(0x2000) + uint16_t cmpl_ring; /* - * This bit must be '1' for the dst_port field to be - * configured. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_DST_PORT \ - UINT32_C(0x4000) + uint16_t seq_id; /* - * This bit must be '1' for the dst_id field to be - * configured. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_DST_ID \ - UINT32_C(0x8000) + uint16_t target_id; /* - * This bit must be '1' for the mirror_vnic_id field to be - * configured. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \ - UINT32_C(0x10000) + uint64_t resp_addr; + /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */ + uint32_t fw_session_id; + /* Control flags. */ + uint32_t flags; + /* Indicates the flow direction. */ + #define HWRM_TF_TCAM_MOVE_INPUT_FLAGS_DIR UINT32_C(0x1) + /* If this bit set to 0, then it indicates rx flow. */ + #define HWRM_TF_TCAM_MOVE_INPUT_FLAGS_DIR_RX UINT32_C(0x0) + /* If this bit is set to 1, then it indicates that tx flow. */ + #define HWRM_TF_TCAM_MOVE_INPUT_FLAGS_DIR_TX UINT32_C(0x1) + #define HWRM_TF_TCAM_MOVE_INPUT_FLAGS_DIR_LAST \ + HWRM_TF_TCAM_MOVE_INPUT_FLAGS_DIR_TX + /* + * TCAM type of the resource, defined globally in the + * hwrm_tf_resc_type enum. + */ + uint32_t type; + /* Number of TCAM index pairs to be swapped for the device. */ + uint16_t count; + /* unused. */ + uint16_t unused0; + /* TCAM index pairs to be swapped for the device. */ + uint16_t idx_pairs[48]; +} __rte_packed; + +/* hwrm_tf_tcam_move_output (size:128b/16B) */ +struct hwrm_tf_tcam_move_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* unused. */ + uint8_t unused0[7]; /* - * Tunnel identifier. - * Virtual Network Identifier (VNI). Only valid with - * tunnel_types VXLAN, NVGRE, and Geneve. - * Only lower 24-bits of VNI field are used - * in setting up the filter. + * This field is used in Output records to indicate that the + * output is completely written to RAM. This field should be + * read as '1' to indicate that the output has been + * completely written. When writing a command completion or + * response to an internal processor, the order of writes has + * to be such that this field is written last. */ - uint32_t tunnel_id; - /* Tunnel Type. */ - uint8_t tunnel_type; - /* Non-tunnel */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \ - UINT32_C(0x0) - /* Virtual eXtensible Local Area Network (VXLAN) */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \ - UINT32_C(0x1) - /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \ - UINT32_C(0x2) - /* Generic Routing Encapsulation (GRE) inside Ethernet payload */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \ - UINT32_C(0x3) - /* IP in IP */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \ - UINT32_C(0x4) - /* Generic Network Virtualization Encapsulation (Geneve) */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \ - UINT32_C(0x5) - /* Multi-Protocol Lable Switching (MPLS) */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \ - UINT32_C(0x6) - /* Stateless Transport Tunnel (STT) */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \ - UINT32_C(0x7) - /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \ - UINT32_C(0x8) - /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \ - UINT32_C(0x9) - /* Any tunneled traffic */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \ - UINT32_C(0xff) - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_LAST \ - HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL - uint8_t unused_0; - uint16_t unused_1; + uint8_t valid; +} __rte_packed; + +/********************* + * hwrm_tf_tcam_free * + *********************/ + + +/* hwrm_tf_tcam_free_input (size:1024b/128B) */ +struct hwrm_tf_tcam_free_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * This value indicates the source MAC address in - * the Ethernet header. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - uint8_t src_macaddr[6]; - uint8_t unused_2[2]; + uint16_t cmpl_ring; /* - * This value indicates the destination MAC address in - * the Ethernet header. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - uint8_t dst_macaddr[6]; + uint16_t seq_id; /* - * This value indicates the VLAN ID of the outer VLAN tag - * in the Ethernet header. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - uint16_t ovlan_vid; + uint16_t target_id; /* - * This value indicates the VLAN ID of the inner VLAN tag - * in the Ethernet header. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - uint16_t ivlan_vid; + uint64_t resp_addr; + /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */ + uint32_t fw_session_id; + /* Control flags. */ + uint32_t flags; + /* Indicates the flow direction. */ + #define HWRM_TF_TCAM_FREE_INPUT_FLAGS_DIR UINT32_C(0x1) + /* If this bit set to 0, then it indicates rx flow. */ + #define HWRM_TF_TCAM_FREE_INPUT_FLAGS_DIR_RX UINT32_C(0x0) + /* If this bit is set to 1, then it indicates that tx flow. */ + #define HWRM_TF_TCAM_FREE_INPUT_FLAGS_DIR_TX UINT32_C(0x1) + #define HWRM_TF_TCAM_FREE_INPUT_FLAGS_DIR_LAST \ + HWRM_TF_TCAM_FREE_INPUT_FLAGS_DIR_TX + /* + * TCAM type of the resource, defined globally in the + * hwrm_tf_resc_type enum. + */ + uint32_t type; + /* Number of TCAM index to be deleted for the device. */ + uint16_t count; + /* unused. */ + uint16_t unused0; + /* TCAM index list to be deleted for the device. */ + uint16_t idx_list[48]; +} __rte_packed; + +/* hwrm_tf_tcam_free_output (size:128b/16B) */ +struct hwrm_tf_tcam_free_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* unused. */ + uint8_t unused0[7]; /* - * This value indicates the VLAN ID of the outer VLAN tag - * in the tunnel Ethernet header. + * This field is used in Output records to indicate that the + * output is completely written to RAM. This field should be + * read as '1' to indicate that the output has been + * completely written. When writing a command completion or + * response to an internal processor, the order of writes has + * to be such that this field is written last. */ - uint16_t t_ovlan_vid; + uint8_t valid; +} __rte_packed; + +/************************** + * hwrm_tf_global_cfg_set * + **************************/ + + +/* hwrm_tf_global_cfg_set_input (size:448b/56B) */ +struct hwrm_tf_global_cfg_set_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * This value indicates the VLAN ID of the inner VLAN tag - * in the tunnel Ethernet header. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - uint16_t t_ivlan_vid; - /* This value indicates the ethertype in the Ethernet header. */ - uint16_t ethertype; + uint16_t cmpl_ring; /* - * This value indicates the type of IP address. - * 4 - IPv4 - * 6 - IPv6 - * All others are invalid. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - uint8_t ip_addr_type; - /* invalid */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_UNKNOWN \ - UINT32_C(0x0) - /* IPv4 */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV4 \ - UINT32_C(0x4) - /* IPv6 */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 \ - UINT32_C(0x6) - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_LAST \ - HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 + uint16_t seq_id; /* - * The value of protocol filed in IP header. - * Applies to UDP and TCP traffic. - * 6 - TCP - * 17 - UDP + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - uint8_t ip_protocol; - /* invalid */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_UNKNOWN \ - UINT32_C(0x0) - /* TCP */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_TCP \ - UINT32_C(0x6) - /* UDP */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP \ - UINT32_C(0x11) - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_LAST \ - HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP - uint16_t unused_3; - uint32_t unused_4; + uint16_t target_id; /* - * The value of source IP address to be used in filtering. - * For IPv4, first four bytes represent the IP address. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - uint32_t src_ipaddr[4]; + uint64_t resp_addr; + /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */ + uint32_t fw_session_id; + /* Control flags. */ + uint32_t flags; + /* Indicates the flow direction. */ + #define HWRM_TF_GLOBAL_CFG_SET_INPUT_FLAGS_DIR UINT32_C(0x1) + /* If this bit set to 0, then it indicates rx flow. */ + #define HWRM_TF_GLOBAL_CFG_SET_INPUT_FLAGS_DIR_RX UINT32_C(0x0) + /* If this bit is set to 1, then it indicates that tx flow. */ + #define HWRM_TF_GLOBAL_CFG_SET_INPUT_FLAGS_DIR_TX UINT32_C(0x1) + #define HWRM_TF_GLOBAL_CFG_SET_INPUT_FLAGS_DIR_LAST \ + HWRM_TF_GLOBAL_CFG_SET_INPUT_FLAGS_DIR_TX + /* Global Cfg type */ + uint32_t type; + /* Offset of the type */ + uint32_t offset; + /* Size of the data to set in bytes */ + uint16_t size; + /* unused. */ + uint8_t unused0[6]; + /* Data to set */ + uint8_t data[16]; +} __rte_packed; + +/* hwrm_tf_global_cfg_set_output (size:128b/16B) */ +struct hwrm_tf_global_cfg_set_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* unused. */ + uint8_t unused0[7]; /* - * The value of destination IP address to be used in filtering. - * For IPv4, first four bytes represent the IP address. + * This field is used in Output records to indicate that the + * output is completely written to RAM. This field should be + * read as '1' to indicate that the output has been + * completely written. When writing a command completion or + * response to an internal processor, the order of writes has + * to be such that this field is written last. */ - uint32_t dst_ipaddr[4]; + uint8_t valid; +} __rte_packed; + +/************************** + * hwrm_tf_global_cfg_get * + **************************/ + + +/* hwrm_tf_global_cfg_get_input (size:320b/40B) */ +struct hwrm_tf_global_cfg_get_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * The value of source port to be used in filtering. - * Applies to UDP and TCP traffic. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - uint16_t src_port; + uint16_t cmpl_ring; /* - * The value of destination port to be used in filtering. - * Applies to UDP and TCP traffic. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - uint16_t dst_port; + uint16_t seq_id; /* - * If set, this value shall represent the - * Logical VNIC ID of the destination VNIC for the RX - * path. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - uint16_t dst_id; + uint16_t target_id; /* - * If set, this value shall represent the L2 context that matches the L2 - * information of the decap filter. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - uint16_t l2_ctxt_ref_id; -} __attribute__((packed)); + uint64_t resp_addr; + /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */ + uint32_t fw_session_id; + /* Control flags. */ + uint32_t flags; + /* Indicates the flow direction. */ + #define HWRM_TF_GLOBAL_CFG_GET_INPUT_FLAGS_DIR UINT32_C(0x1) + /* If this bit set to 0, then it indicates rx flow. */ + #define HWRM_TF_GLOBAL_CFG_GET_INPUT_FLAGS_DIR_RX UINT32_C(0x0) + /* If this bit is set to 1, then it indicates that tx flow. */ + #define HWRM_TF_GLOBAL_CFG_GET_INPUT_FLAGS_DIR_TX UINT32_C(0x1) + #define HWRM_TF_GLOBAL_CFG_GET_INPUT_FLAGS_DIR_LAST \ + HWRM_TF_GLOBAL_CFG_GET_INPUT_FLAGS_DIR_TX + /* Global Cfg type */ + uint32_t type; + /* Offset of the type */ + uint32_t offset; + /* Size of the data to set in bytes */ + uint16_t size; + /* unused. */ + uint8_t unused0[6]; +} __rte_packed; -/* hwrm_cfa_decap_filter_alloc_output (size:128b/16B) */ -struct hwrm_cfa_decap_filter_alloc_output { +/* hwrm_tf_global_cfg_get_output (size:256b/32B) */ +struct hwrm_tf_global_cfg_get_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -23888,26 +38895,21 @@ struct hwrm_cfa_decap_filter_alloc_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* This value is an opaque id into CFA data structures. */ - uint32_t decap_filter_id; - uint8_t unused_0[3]; - /* - * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' - * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. - */ - uint8_t valid; -} __attribute__((packed)); + /* Size of the data read in bytes */ + uint16_t size; + /* unused. */ + uint8_t unused0[6]; + /* Data to set */ + uint8_t data[16]; +} __rte_packed; /****************************** - * hwrm_cfa_decap_filter_free * + * hwrm_tunnel_dst_port_query * ******************************/ -/* hwrm_cfa_decap_filter_free_input (size:192b/24B) */ -struct hwrm_cfa_decap_filter_free_input { +/* hwrm_tunnel_dst_port_query_input (size:192b/24B) */ +struct hwrm_tunnel_dst_port_query_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -23924,7 +38926,8 @@ struct hwrm_cfa_decap_filter_free_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -23935,13 +38938,33 @@ struct hwrm_cfa_decap_filter_free_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* This value is an opaque id into CFA data structures. */ - uint32_t decap_filter_id; - uint8_t unused_0[4]; -} __attribute__((packed)); + /* Tunnel Type. */ + uint8_t tunnel_type; + /* Virtual eXtensible Local Area Network (VXLAN) */ + #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_VXLAN \ + UINT32_C(0x1) + /* Generic Network Virtualization Encapsulation (Geneve) */ + #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_GENEVE \ + UINT32_C(0x5) + /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ + #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_VXLAN_V4 \ + UINT32_C(0x9) + /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ + #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_IPGRE_V1 \ + UINT32_C(0xa) + /* Use fixed layer 2 ether type of 0xFFFF */ + #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_L2_ETYPE \ + UINT32_C(0xb) + /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */ + #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \ + UINT32_C(0xc) + #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_LAST \ + HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 + uint8_t unused_0[7]; +} __rte_packed; -/* hwrm_cfa_decap_filter_free_output (size:128b/16B) */ -struct hwrm_cfa_decap_filter_free_output { +/* hwrm_tunnel_dst_port_query_output (size:128b/16B) */ +struct hwrm_tunnel_dst_port_query_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -23950,7 +38973,25 @@ struct hwrm_cfa_decap_filter_free_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - uint8_t unused_0[7]; + /* + * This field represents the identifier of L4 destination port + * used for the given tunnel type. This field is valid for + * specific tunnel types that use layer 4 (e.g. UDP) + * transports for tunneling. + */ + uint16_t tunnel_dst_port_id; + /* + * This field represents the value of L4 destination port + * identified by tunnel_dst_port_id. This field is valid for + * specific tunnel types that use layer 4 (e.g. UDP) + * transports for tunneling. + * This field is in network byte order. + * + * A value of 0 means that the destination port is not + * configured. + */ + uint16_t tunnel_dst_port_val; + uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -23959,15 +39000,15 @@ struct hwrm_cfa_decap_filter_free_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/*********************** - * hwrm_cfa_flow_alloc * - ***********************/ +/****************************** + * hwrm_tunnel_dst_port_alloc * + ******************************/ -/* hwrm_cfa_flow_alloc_input (size:1024b/128B) */ -struct hwrm_cfa_flow_alloc_input { +/* hwrm_tunnel_dst_port_alloc_input (size:192b/24B) */ +struct hwrm_tunnel_dst_port_alloc_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -23984,7 +39025,8 @@ struct hwrm_cfa_flow_alloc_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -23995,213 +39037,137 @@ struct hwrm_cfa_flow_alloc_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - uint16_t flags; - /* tunnel is 1 b */ - #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_TUNNEL \ - UINT32_C(0x1) - /* num_vlan is 2 b */ - #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_MASK \ - UINT32_C(0x6) - #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_SFT 1 - /* no tags */ - #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_NONE \ - (UINT32_C(0x0) << 1) - /* 1 tag */ - #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_ONE \ - (UINT32_C(0x1) << 1) - /* 2 tags */ - #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_TWO \ - (UINT32_C(0x2) << 1) - #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_LAST \ - HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_TWO - /* Enumeration denoting the Flow Type. */ - #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_MASK \ - UINT32_C(0x38) - #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_SFT 3 - /* L2 flow */ - #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_L2 \ - (UINT32_C(0x0) << 3) - /* IPV4 flow */ - #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_IPV4 \ - (UINT32_C(0x1) << 3) - /* IPV6 flow */ - #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_IPV6 \ - (UINT32_C(0x2) << 3) - #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_LAST \ - HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_IPV6 - /* - * when set to 1, indicates TX flow offload for function specified in src_fid and - * the dst_fid should be set to invalid value. To indicate a VM to VM flow, both - * of the path_tx and path_rx flags need to be set. For virtio vSwitch offload - * case, the src_fid and dst_fid is set to the same fid value. For the SRIOV - * vSwitch offload case, the src_fid and dst_fid must be set to the same VF FID - * belong to the children VFs of the same PF to indicate VM to VM flow. - */ - #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_PATH_TX \ - UINT32_C(0x40) - /* - * when set to 1, indicates RX flow offload for function specified in dst_fid and - * the src_fid should be set to invalid value. - */ - #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_PATH_RX \ - UINT32_C(0x80) - /* - * Set to 1 to indicate matching of VXLAN VNI from the custom vxlan header is - * required and the VXLAN VNI value is stored in the first 24 bits of the dmac field. - * This flag is only valid when the flow direction is RX. - */ - #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_MATCH_VXLAN_IP_VNI \ - UINT32_C(0x100) - /* - * Tx Flow: vf fid. - * Rx Flow: pf fid. - */ - uint16_t src_fid; - /* Tunnel handle valid when tunnel flag is set. */ - uint32_t tunnel_handle; - uint16_t action_flags; - /* - * Setting of this flag indicates drop action. If this flag is not set, - * then it should be considered accept action. - */ - #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_FWD \ + /* Tunnel Type. */ + uint8_t tunnel_type; + /* Virtual eXtensible Local Area Network (VXLAN) */ + #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \ UINT32_C(0x1) - /* recycle is 1 b */ - #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_RECYCLE \ - UINT32_C(0x2) - /* - * Setting of this flag indicates drop action. If this flag is not set, - * then it should be considered accept action. - */ - #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_DROP \ - UINT32_C(0x4) - /* meter is 1 b */ - #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_METER \ - UINT32_C(0x8) - /* tunnel is 1 b */ - #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_TUNNEL \ - UINT32_C(0x10) - /* nat_src is 1 b */ - #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_NAT_SRC \ - UINT32_C(0x20) - /* nat_dest is 1 b */ - #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_NAT_DEST \ - UINT32_C(0x40) - /* nat_ipv4_address is 1 b */ - #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_NAT_IPV4_ADDRESS \ - UINT32_C(0x80) - /* l2_header_rewrite is 1 b */ - #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_L2_HEADER_REWRITE \ - UINT32_C(0x100) - /* ttl_decrement is 1 b */ - #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_TTL_DECREMENT \ - UINT32_C(0x200) - /* - * If set to 1 and flow direction is TX, it indicates decap of L2 header - * and encap of tunnel header. If set to 1 and flow direction is RX, it - * indicates decap of tunnel header and encap L2 header. The type of tunnel - * is specified in the tunnel_type field. - */ - #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_TUNNEL_IP \ - UINT32_C(0x400) - /* - * Tx Flow: pf or vf fid. - * Rx Flow: vf fid. - */ - uint16_t dst_fid; - /* VLAN tpid, valid when push_vlan flag is set. */ - uint16_t l2_rewrite_vlan_tpid; - /* VLAN tci, valid when push_vlan flag is set. */ - uint16_t l2_rewrite_vlan_tci; - /* Meter id, valid when meter flag is set. */ - uint16_t act_meter_id; - /* Flow with the same l2 context tcam key. */ - uint16_t ref_flow_handle; - /* This value sets the match value for the ethertype. */ - uint16_t ethertype; - /* valid when num tags is 1 or 2. */ - uint16_t outer_vlan_tci; - /* This value sets the match value for the Destination MAC address. */ - uint16_t dmac[3]; - /* valid when num tags is 2. */ - uint16_t inner_vlan_tci; - /* This value sets the match value for the Source MAC address. */ - uint16_t smac[3]; - /* The bit length of destination IP address mask. */ - uint8_t ip_dst_mask_len; - /* The bit length of source IP address mask. */ - uint8_t ip_src_mask_len; - /* The value of destination IPv4/IPv6 address. */ - uint32_t ip_dst[4]; - /* The source IPv4/IPv6 address. */ - uint32_t ip_src[4]; + /* Generic Network Virtualization Encapsulation (Geneve) */ + #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \ + UINT32_C(0x5) + /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ + #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \ + UINT32_C(0x9) + /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ + #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \ + UINT32_C(0xa) + /* Use fixed layer 2 ether type of 0xFFFF */ + #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_L2_ETYPE \ + UINT32_C(0xb) + /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */ + #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \ + UINT32_C(0xc) + #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_LAST \ + HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 + uint8_t unused_0; /* - * The value of source port. - * Applies to UDP and TCP traffic. + * This field represents the value of L4 destination port used + * for the given tunnel type. This field is valid for + * specific tunnel types that use layer 4 (e.g. UDP) + * transports for tunneling. + * + * This field is in network byte order. + * + * A value of 0 shall fail the command. */ - uint16_t l4_src_port; + uint16_t tunnel_dst_port_val; + uint8_t unused_1[4]; +} __rte_packed; + +/* hwrm_tunnel_dst_port_alloc_output (size:128b/16B) */ +struct hwrm_tunnel_dst_port_alloc_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; /* - * The value of source port mask. - * Applies to UDP and TCP traffic. + * Identifier of a tunnel L4 destination port value. Only applies to tunnel + * types that has l4 destination port parameters. */ - uint16_t l4_src_port_mask; + uint16_t tunnel_dst_port_id; + uint8_t unused_0[5]; /* - * The value of destination port. - * Applies to UDP and TCP traffic. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - uint16_t l4_dst_port; + uint8_t valid; +} __rte_packed; + +/***************************** + * hwrm_tunnel_dst_port_free * + *****************************/ + + +/* hwrm_tunnel_dst_port_free_input (size:192b/24B) */ +struct hwrm_tunnel_dst_port_free_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * The value of destination port mask. - * Applies to UDP and TCP traffic. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - uint16_t l4_dst_port_mask; + uint16_t cmpl_ring; /* - * NAT IPv4/6 address based on address type flag. - * 0 values are ignored. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - uint32_t nat_ip_address[4]; - /* L2 header re-write Destination MAC address. */ - uint16_t l2_rewrite_dmac[3]; + uint16_t seq_id; /* - * The NAT source/destination port based on direction flag. - * Applies to UDP and TCP traffic. - * 0 values are ignored. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM */ - uint16_t nat_port; - /* L2 header re-write Source MAC address. */ - uint16_t l2_rewrite_smac[3]; - /* The value of ip protocol. */ - uint8_t ip_proto; + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; /* Tunnel Type. */ uint8_t tunnel_type; - /* Non-tunnel */ - #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL UINT32_C(0x0) /* Virtual eXtensible Local Area Network (VXLAN) */ - #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN UINT32_C(0x1) - /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ - #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_NVGRE UINT32_C(0x2) - /* Generic Routing Encapsulation (GRE) inside Ethernet payload */ - #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_L2GRE UINT32_C(0x3) - /* IP in IP */ - #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPIP UINT32_C(0x4) + #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN \ + UINT32_C(0x1) /* Generic Network Virtualization Encapsulation (Geneve) */ - #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_GENEVE UINT32_C(0x5) - /* Multi-Protocol Lable Switching (MPLS) */ - #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_MPLS UINT32_C(0x6) - /* Stateless Transport Tunnel (STT) */ - #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_STT UINT32_C(0x7) - /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ - #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPGRE UINT32_C(0x8) + #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_GENEVE \ + UINT32_C(0x5) /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ - #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 UINT32_C(0x9) - /* Any tunneled traffic */ - #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL UINT32_C(0xff) - #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_LAST \ - HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL -} __attribute__((packed)); + #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN_V4 \ + UINT32_C(0x9) + /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ + #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_IPGRE_V1 \ + UINT32_C(0xa) + /* Use fixed layer 2 ether type of 0xFFFF */ + #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_L2_ETYPE \ + UINT32_C(0xb) + /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */ + #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \ + UINT32_C(0xc) + #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_LAST \ + HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 + uint8_t unused_0; + /* + * Identifier of a tunnel L4 destination port value. Only applies to tunnel + * types that has l4 destination port parameters. + */ + uint16_t tunnel_dst_port_id; + uint8_t unused_1[4]; +} __rte_packed; -/* hwrm_cfa_flow_alloc_output (size:256b/32B) */ -struct hwrm_cfa_flow_alloc_output { +/* hwrm_tunnel_dst_port_free_output (size:128b/16B) */ +struct hwrm_tunnel_dst_port_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -24210,19 +39176,6 @@ struct hwrm_cfa_flow_alloc_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* Flow record index. */ - uint16_t flow_handle; - uint8_t unused_0[2]; - /* - * This is the ID of the flow associated with this - * filter. - * This value shall be used to match and associate the - * flow identifier returned in completion records. - * A value of 0xFFFFFFFF shall indicate no flow id. - */ - uint32_t flow_id; - /* This value identifies a set of CFA data structures used for a flow. */ - uint64_t ext_flow_handle; uint8_t unused_1[7]; /* * This field is used in Output records to indicate that the output @@ -24232,15 +39185,157 @@ struct hwrm_cfa_flow_alloc_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/********************** - * hwrm_cfa_flow_free * - **********************/ +/* Periodic statistics context DMA to host. */ +/* ctx_hw_stats (size:1280b/160B) */ +struct ctx_hw_stats { + /* Number of received unicast packets */ + uint64_t rx_ucast_pkts; + /* Number of received multicast packets */ + uint64_t rx_mcast_pkts; + /* Number of received broadcast packets */ + uint64_t rx_bcast_pkts; + /* Number of discarded packets on receive path */ + uint64_t rx_discard_pkts; + /* Number of packets on receive path with error */ + uint64_t rx_error_pkts; + /* Number of received bytes for unicast traffic */ + uint64_t rx_ucast_bytes; + /* Number of received bytes for multicast traffic */ + uint64_t rx_mcast_bytes; + /* Number of received bytes for broadcast traffic */ + uint64_t rx_bcast_bytes; + /* Number of transmitted unicast packets */ + uint64_t tx_ucast_pkts; + /* Number of transmitted multicast packets */ + uint64_t tx_mcast_pkts; + /* Number of transmitted broadcast packets */ + uint64_t tx_bcast_pkts; + /* Number of packets on transmit path with error */ + uint64_t tx_error_pkts; + /* Number of discarded packets on transmit path */ + uint64_t tx_discard_pkts; + /* Number of transmitted bytes for unicast traffic */ + uint64_t tx_ucast_bytes; + /* Number of transmitted bytes for multicast traffic */ + uint64_t tx_mcast_bytes; + /* Number of transmitted bytes for broadcast traffic */ + uint64_t tx_bcast_bytes; + /* Number of TPA packets */ + uint64_t tpa_pkts; + /* Number of TPA bytes */ + uint64_t tpa_bytes; + /* Number of TPA events */ + uint64_t tpa_events; + /* Number of TPA aborts */ + uint64_t tpa_aborts; +} __rte_packed; + +/* + * Extended periodic statistics context DMA to host. On cards that + * support TPA v2, additional TPA related stats exist and can be retrieved + * by DMA of ctx_hw_stats_ext, rather than legacy ctx_hw_stats structure. + */ +/* ctx_hw_stats_ext (size:1344b/168B) */ +struct ctx_hw_stats_ext { + /* Number of received unicast packets */ + uint64_t rx_ucast_pkts; + /* Number of received multicast packets */ + uint64_t rx_mcast_pkts; + /* Number of received broadcast packets */ + uint64_t rx_bcast_pkts; + /* Number of discarded packets on receive path */ + uint64_t rx_discard_pkts; + /* Number of packets on receive path with error */ + uint64_t rx_error_pkts; + /* Number of received bytes for unicast traffic */ + uint64_t rx_ucast_bytes; + /* Number of received bytes for multicast traffic */ + uint64_t rx_mcast_bytes; + /* Number of received bytes for broadcast traffic */ + uint64_t rx_bcast_bytes; + /* Number of transmitted unicast packets */ + uint64_t tx_ucast_pkts; + /* Number of transmitted multicast packets */ + uint64_t tx_mcast_pkts; + /* Number of transmitted broadcast packets */ + uint64_t tx_bcast_pkts; + /* Number of packets on transmit path with error */ + uint64_t tx_error_pkts; + /* Number of discarded packets on transmit path */ + uint64_t tx_discard_pkts; + /* Number of transmitted bytes for unicast traffic */ + uint64_t tx_ucast_bytes; + /* Number of transmitted bytes for multicast traffic */ + uint64_t tx_mcast_bytes; + /* Number of transmitted bytes for broadcast traffic */ + uint64_t tx_bcast_bytes; + /* Number of TPA eligible packets */ + uint64_t rx_tpa_eligible_pkt; + /* Number of TPA eligible bytes */ + uint64_t rx_tpa_eligible_bytes; + /* Number of TPA packets */ + uint64_t rx_tpa_pkt; + /* Number of TPA bytes */ + uint64_t rx_tpa_bytes; + /* Number of TPA errors */ + uint64_t rx_tpa_errors; +} __rte_packed; + +/* Periodic Engine statistics context DMA to host. */ +/* ctx_eng_stats (size:512b/64B) */ +struct ctx_eng_stats { + /* + * Count of data bytes into the Engine. + * This includes any user supplied prefix, + * but does not include any predefined + * prefix data. + */ + uint64_t eng_bytes_in; + /* Count of data bytes out of the Engine. */ + uint64_t eng_bytes_out; + /* + * Count, in 4-byte (dword) units, of bytes + * that are input as auxiliary data. + * This includes the aux_cmd data. + */ + uint64_t aux_bytes_in; + /* + * Count, in 4-byte (dword) units, of bytes + * that are output as auxiliary data. + * This count is the buffer space for aux_data + * output provided in the RQE, not the actual + * aux_data written + */ + uint64_t aux_bytes_out; + /* Count of number of commands executed. */ + uint64_t commands; + /* + * Count of number of error commands. + * These are the commands with a + * non-zero status value. + */ + uint64_t error_commands; + /* + * Compression/Encryption Engine usage, + * the unit is count of clock cycles + */ + uint64_t cce_engine_usage; + /* + * De-Compression/De-cryption Engine usage, + * the unit is count of clock cycles + */ + uint64_t cdd_engine_usage; +} __rte_packed; + +/*********************** + * hwrm_stat_ctx_alloc * + ***********************/ -/* hwrm_cfa_flow_free_input (size:256b/32B) */ -struct hwrm_cfa_flow_free_input { +/* hwrm_stat_ctx_alloc_input (size:256b/32B) */ +struct hwrm_stat_ctx_alloc_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -24257,7 +39352,8 @@ struct hwrm_cfa_flow_free_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -24268,15 +39364,51 @@ struct hwrm_cfa_flow_free_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* Flow record index. */ - uint16_t flow_handle; - uint8_t unused_0[6]; - /* This value identifies a set of CFA data structures used for a flow. */ - uint64_t ext_flow_handle; -} __attribute__((packed)); + /* + * This is the address for statistic block. + * > For new versions of the chip, this address should be 128B + * > aligned. + */ + uint64_t stats_dma_addr; + /* + * The statistic block update period in ms. + * e.g. 250ms, 500ms, 750ms, 1000ms. + * If update_period_ms is 0, then the stats update + * shall be never done and the DMA address shall not be used. + * In this case, the stat block can only be read by + * hwrm_stat_ctx_query command. + * On Ethernet/L2 based devices: + * if tpa v2 supported (hwrm_vnic_qcaps[max_aggs_supported]>0), + * ctx_hw_stats_ext is used for DMA, + * else + * ctx_hw_stats is used for DMA. + */ + uint32_t update_period_ms; + /* + * This field is used to specify statistics context specific + * configuration flags. + */ + uint8_t stat_ctx_flags; + /* + * When this bit is set to '1', the statistics context shall be + * allocated for RoCE traffic only. In this case, traffic other + * than offloaded RoCE traffic shall not be included in this + * statistic context. + * When this bit is set to '0', the statistics context shall be + * used for network traffic or engine traffic. + */ + #define HWRM_STAT_CTX_ALLOC_INPUT_STAT_CTX_FLAGS_ROCE UINT32_C(0x1) + uint8_t unused_0; + /* + * This is the size of the structure (ctx_hw_stats or + * ctx_hw_stats_ext) that the driver has allocated to be used + * for the periodic DMA updates. + */ + uint16_t stats_dma_length; +} __rte_packed; -/* hwrm_cfa_flow_free_output (size:256b/32B) */ -struct hwrm_cfa_flow_free_output { +/* hwrm_stat_ctx_alloc_output (size:128b/16B) */ +struct hwrm_stat_ctx_alloc_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -24285,11 +39417,9 @@ struct hwrm_cfa_flow_free_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* packet is 64 b */ - uint64_t packet; - /* byte is 64 b */ - uint64_t byte; - uint8_t unused_0[7]; + /* This is the statistics context ID value. */ + uint32_t stat_ctx_id; + uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -24298,15 +39428,15 @@ struct hwrm_cfa_flow_free_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/*********************** - * hwrm_cfa_flow_flush * - ***********************/ +/********************** + * hwrm_stat_ctx_free * + **********************/ -/* hwrm_cfa_flow_flush_input (size:192b/24B) */ -struct hwrm_cfa_flow_flush_input { +/* hwrm_stat_ctx_free_input (size:192b/24B) */ +struct hwrm_stat_ctx_free_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -24323,7 +39453,8 @@ struct hwrm_cfa_flow_flush_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -24334,12 +39465,13 @@ struct hwrm_cfa_flow_flush_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - uint32_t flags; + /* ID of the statistics context that is being queried. */ + uint32_t stat_ctx_id; uint8_t unused_0[4]; -} __attribute__((packed)); +} __rte_packed; -/* hwrm_cfa_flow_flush_output (size:128b/16B) */ -struct hwrm_cfa_flow_flush_output { +/* hwrm_stat_ctx_free_output (size:128b/16B) */ +struct hwrm_stat_ctx_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -24348,7 +39480,9 @@ struct hwrm_cfa_flow_flush_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - uint8_t unused_0[7]; + /* This is the statistics context ID value. */ + uint32_t stat_ctx_id; + uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -24357,15 +39491,15 @@ struct hwrm_cfa_flow_flush_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; /*********************** - * hwrm_cfa_flow_stats * + * hwrm_stat_ctx_query * ***********************/ -/* hwrm_cfa_flow_stats_input (size:640b/80B) */ -struct hwrm_cfa_flow_stats_input { +/* hwrm_stat_ctx_query_input (size:192b/24B) */ +struct hwrm_stat_ctx_query_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -24382,7 +39516,8 @@ struct hwrm_cfa_flow_stats_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -24393,53 +39528,20 @@ struct hwrm_cfa_flow_stats_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* Flow handle. */ - uint16_t num_flows; - /* Flow handle. */ - uint16_t flow_handle_0; - /* Flow handle. */ - uint16_t flow_handle_1; - /* Flow handle. */ - uint16_t flow_handle_2; - /* Flow handle. */ - uint16_t flow_handle_3; - /* Flow handle. */ - uint16_t flow_handle_4; - /* Flow handle. */ - uint16_t flow_handle_5; - /* Flow handle. */ - uint16_t flow_handle_6; - /* Flow handle. */ - uint16_t flow_handle_7; - /* Flow handle. */ - uint16_t flow_handle_8; - /* Flow handle. */ - uint16_t flow_handle_9; - uint8_t unused_0[2]; - /* Flow ID of a flow. */ - uint32_t flow_id_0; - /* Flow ID of a flow. */ - uint32_t flow_id_1; - /* Flow ID of a flow. */ - uint32_t flow_id_2; - /* Flow ID of a flow. */ - uint32_t flow_id_3; - /* Flow ID of a flow. */ - uint32_t flow_id_4; - /* Flow ID of a flow. */ - uint32_t flow_id_5; - /* Flow ID of a flow. */ - uint32_t flow_id_6; - /* Flow ID of a flow. */ - uint32_t flow_id_7; - /* Flow ID of a flow. */ - uint32_t flow_id_8; - /* Flow ID of a flow. */ - uint32_t flow_id_9; -} __attribute__((packed)); + /* ID of the statistics context that is being queried. */ + uint32_t stat_ctx_id; + uint8_t flags; + /* + * This bit is set to 1 when request is for a counter mask, + * representing the width of each of the stats counters, rather + * than counters themselves. + */ + #define HWRM_STAT_CTX_QUERY_INPUT_FLAGS_COUNTER_MASK UINT32_C(0x1) + uint8_t unused_0[3]; +} __rte_packed; -/* hwrm_cfa_flow_stats_output (size:1408b/176B) */ -struct hwrm_cfa_flow_stats_output { +/* hwrm_stat_ctx_query_output (size:1408b/176B) */ +struct hwrm_stat_ctx_query_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -24448,46 +39550,46 @@ struct hwrm_cfa_flow_stats_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* packet_0 is 64 b */ - uint64_t packet_0; - /* packet_1 is 64 b */ - uint64_t packet_1; - /* packet_2 is 64 b */ - uint64_t packet_2; - /* packet_3 is 64 b */ - uint64_t packet_3; - /* packet_4 is 64 b */ - uint64_t packet_4; - /* packet_5 is 64 b */ - uint64_t packet_5; - /* packet_6 is 64 b */ - uint64_t packet_6; - /* packet_7 is 64 b */ - uint64_t packet_7; - /* packet_8 is 64 b */ - uint64_t packet_8; - /* packet_9 is 64 b */ - uint64_t packet_9; - /* byte_0 is 64 b */ - uint64_t byte_0; - /* byte_1 is 64 b */ - uint64_t byte_1; - /* byte_2 is 64 b */ - uint64_t byte_2; - /* byte_3 is 64 b */ - uint64_t byte_3; - /* byte_4 is 64 b */ - uint64_t byte_4; - /* byte_5 is 64 b */ - uint64_t byte_5; - /* byte_6 is 64 b */ - uint64_t byte_6; - /* byte_7 is 64 b */ - uint64_t byte_7; - /* byte_8 is 64 b */ - uint64_t byte_8; - /* byte_9 is 64 b */ - uint64_t byte_9; + /* Number of transmitted unicast packets */ + uint64_t tx_ucast_pkts; + /* Number of transmitted multicast packets */ + uint64_t tx_mcast_pkts; + /* Number of transmitted broadcast packets */ + uint64_t tx_bcast_pkts; + /* Number of transmitted packets with error */ + uint64_t tx_err_pkts; + /* Number of dropped packets on transmit path */ + uint64_t tx_drop_pkts; + /* Number of transmitted bytes for unicast traffic */ + uint64_t tx_ucast_bytes; + /* Number of transmitted bytes for multicast traffic */ + uint64_t tx_mcast_bytes; + /* Number of transmitted bytes for broadcast traffic */ + uint64_t tx_bcast_bytes; + /* Number of received unicast packets */ + uint64_t rx_ucast_pkts; + /* Number of received multicast packets */ + uint64_t rx_mcast_pkts; + /* Number of received broadcast packets */ + uint64_t rx_bcast_pkts; + /* Number of received packets with error */ + uint64_t rx_err_pkts; + /* Number of dropped packets on receive path */ + uint64_t rx_drop_pkts; + /* Number of received bytes for unicast traffic */ + uint64_t rx_ucast_bytes; + /* Number of received bytes for multicast traffic */ + uint64_t rx_mcast_bytes; + /* Number of received bytes for broadcast traffic */ + uint64_t rx_bcast_bytes; + /* Number of aggregated unicast packets */ + uint64_t rx_agg_pkts; + /* Number of aggregated unicast bytes */ + uint64_t rx_agg_bytes; + /* Number of aggregation events */ + uint64_t rx_agg_events; + /* Number of aborted aggregations */ + uint64_t rx_agg_aborts; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output @@ -24497,15 +39599,15 @@ struct hwrm_cfa_flow_stats_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/********************** - * hwrm_cfa_pair_info * - **********************/ +/*************************** + * hwrm_stat_ext_ctx_query * + ***************************/ -/* hwrm_cfa_pair_info_input (size:448b/56B) */ -struct hwrm_cfa_pair_info_input { +/* hwrm_stat_ext_ctx_query_input (size:192b/24B) */ +struct hwrm_stat_ext_ctx_query_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -24522,7 +39624,8 @@ struct hwrm_cfa_pair_info_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -24533,81 +39636,71 @@ struct hwrm_cfa_pair_info_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - uint32_t flags; - /* If this flag is set, lookup by name else lookup by index. */ - #define HWRM_CFA_PAIR_INFO_INPUT_FLAGS_LOOKUP_TYPE UINT32_C(0x1) - /* If this flag is set, lookup by PF id and VF id. */ - #define HWRM_CFA_PAIR_INFO_INPUT_FLAGS_LOOKUP_REPRE UINT32_C(0x2) - /* Pair table index. */ - uint16_t pair_index; - /* Pair pf index. */ - uint8_t pair_pfid; - /* Pair vf index. */ - uint8_t pair_vfid; - /* Pair name (32 byte string). */ - char pair_name[32]; -} __attribute__((packed)); + /* ID of the extended statistics context that is being queried. */ + uint32_t stat_ctx_id; + uint8_t flags; + /* + * This bit is set to 1 when request is for a counter mask, + * representing the width of each of the stats counters, rather + * than counters themselves. + */ + #define HWRM_STAT_EXT_CTX_QUERY_INPUT_FLAGS_COUNTER_MASK \ + UINT32_C(0x1) + uint8_t unused_0[3]; +} __rte_packed; -/* hwrm_cfa_pair_info_output (size:576b/72B) */ -struct hwrm_cfa_pair_info_output { +/* hwrm_stat_ext_ctx_query_output (size:1472b/184B) */ +struct hwrm_stat_ext_ctx_query_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; - /* The length of the response data in number of bytes. */ - uint16_t resp_len; - /* Pair table index. */ - uint16_t next_pair_index; - /* Pair member a's fid. */ - uint16_t a_fid; - /* Logical host number. */ - uint8_t host_a_index; - /* Logical PF number. */ - uint8_t pf_a_index; - /* Pair member a's Linux logical VF number. */ - uint16_t vf_a_index; - /* Rx CFA code. */ - uint16_t rx_cfa_code_a; - /* Tx CFA action. */ - uint16_t tx_cfa_action_a; - /* Pair member b's fid. */ - uint16_t b_fid; - /* Logical host number. */ - uint8_t host_b_index; - /* Logical PF number. */ - uint8_t pf_b_index; - /* Pair member a's Linux logical VF number. */ - uint16_t vf_b_index; - /* Rx CFA code. */ - uint16_t rx_cfa_code_b; - /* Tx CFA action. */ - uint16_t tx_cfa_action_b; - /* Pair mode (0-vf2fn, 1-rep2fn, 2-rep2rep, 3-proxy, 4-pfpair). */ - uint8_t pair_mode; - /* Pair between VF on local host with PF or VF on specified host. */ - #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_VF2FN UINT32_C(0x0) - /* Pair between REP on local host with PF or VF on specified host. */ - #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_REP2FN UINT32_C(0x1) - /* Pair between REP on local host with REP on specified host. */ - #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_REP2REP UINT32_C(0x2) - /* Pair for the proxy interface. */ - #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_PROXY UINT32_C(0x3) - /* Pair for the PF interface. */ - #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_PFPAIR UINT32_C(0x4) - #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_LAST \ - HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_PFPAIR - /* Pair state. */ - uint8_t pair_state; - /* Pair has been allocated */ - #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_ALLOCATED UINT32_C(0x1) - /* Both pair members are active */ - #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_ACTIVE UINT32_C(0x2) - #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_LAST \ - HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_ACTIVE - /* Pair name (32 byte string). */ - char pair_name[32]; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* Number of received unicast packets */ + uint64_t rx_ucast_pkts; + /* Number of received multicast packets */ + uint64_t rx_mcast_pkts; + /* Number of received broadcast packets */ + uint64_t rx_bcast_pkts; + /* Number of discarded packets on receive path */ + uint64_t rx_discard_pkts; + /* Number of packets on receive path with error */ + uint64_t rx_error_pkts; + /* Number of received bytes for unicast traffic */ + uint64_t rx_ucast_bytes; + /* Number of received bytes for multicast traffic */ + uint64_t rx_mcast_bytes; + /* Number of received bytes for broadcast traffic */ + uint64_t rx_bcast_bytes; + /* Number of transmitted unicast packets */ + uint64_t tx_ucast_pkts; + /* Number of transmitted multicast packets */ + uint64_t tx_mcast_pkts; + /* Number of transmitted broadcast packets */ + uint64_t tx_bcast_pkts; + /* Number of packets on transmit path with error */ + uint64_t tx_error_pkts; + /* Number of discarded packets on transmit path */ + uint64_t tx_discard_pkts; + /* Number of transmitted bytes for unicast traffic */ + uint64_t tx_ucast_bytes; + /* Number of transmitted bytes for multicast traffic */ + uint64_t tx_mcast_bytes; + /* Number of transmitted bytes for broadcast traffic */ + uint64_t tx_bcast_bytes; + /* Number of TPA eligible packets */ + uint64_t rx_tpa_eligible_pkt; + /* Number of TPA eligible bytes */ + uint64_t rx_tpa_eligible_bytes; + /* Number of TPA packets */ + uint64_t rx_tpa_pkt; + /* Number of TPA bytes */ + uint64_t rx_tpa_bytes; + /* Number of TPA errors */ + uint64_t rx_tpa_errors; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output @@ -24617,15 +39710,15 @@ struct hwrm_cfa_pair_info_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/*************************************** - * hwrm_cfa_redirect_query_tunnel_type * - ***************************************/ +/*************************** + * hwrm_stat_ctx_eng_query * + ***************************/ -/* hwrm_cfa_redirect_query_tunnel_type_input (size:192b/24B) */ -struct hwrm_cfa_redirect_query_tunnel_type_input { +/* hwrm_stat_ctx_eng_query_input (size:192b/24B) */ +struct hwrm_stat_ctx_eng_query_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -24642,7 +39735,8 @@ struct hwrm_cfa_redirect_query_tunnel_type_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -24653,13 +39747,13 @@ struct hwrm_cfa_redirect_query_tunnel_type_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* The source function id. */ - uint16_t src_fid; - uint8_t unused_0[6]; -} __attribute__((packed)); + /* ID of the statistics context that is being queried. */ + uint32_t stat_ctx_id; + uint8_t unused_0[4]; +} __rte_packed; -/* hwrm_cfa_redirect_query_tunnel_type_output (size:128b/16B) */ -struct hwrm_cfa_redirect_query_tunnel_type_output { +/* hwrm_stat_ctx_eng_query_output (size:640b/80B) */ +struct hwrm_stat_ctx_eng_query_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -24668,45 +39762,48 @@ struct hwrm_cfa_redirect_query_tunnel_type_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* Tunnel Mask. */ - uint32_t tunnel_mask; - /* Non-tunnel */ - #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_NONTUNNEL \ - UINT32_C(0x1) - /* Virtual eXtensible Local Area Network (VXLAN) */ - #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_VXLAN \ - UINT32_C(0x2) - /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ - #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_NVGRE \ - UINT32_C(0x4) - /* Generic Routing Encapsulation (GRE) inside Ethernet payload */ - #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_L2GRE \ - UINT32_C(0x8) - /* IP in IP */ - #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_IPIP \ - UINT32_C(0x10) - /* Generic Network Virtualization Encapsulation (Geneve) */ - #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_GENEVE \ - UINT32_C(0x20) - /* Multi-Protocol Lable Switching (MPLS) */ - #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_MPLS \ - UINT32_C(0x40) - /* Stateless Transport Tunnel (STT) */ - #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_STT \ - UINT32_C(0x80) - /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ - #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_IPGRE \ - UINT32_C(0x100) - /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ - #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_VXLAN_V4 \ - UINT32_C(0x200) - /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ - #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_IPGRE_V1 \ - UINT32_C(0x400) - /* Any tunneled traffic */ - #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_ANYTUNNEL \ - UINT32_C(0x800) - uint8_t unused_0[3]; + /* + * Count of data bytes into the Engine. + * This includes any user supplied prefix, + * but does not include any predefined + * prefix data. + */ + uint64_t eng_bytes_in; + /* Count of data bytes out of the Engine. */ + uint64_t eng_bytes_out; + /* + * Count, in 4-byte (dword) units, of bytes + * that are input as auxiliary data. + * This includes the aux_cmd data. + */ + uint64_t aux_bytes_in; + /* + * Count, in 4-byte (dword) units, of bytes + * that are output as auxiliary data. + * This count is the buffer space for aux_data + * output provided in the RQE, not the actual + * aux_data written + */ + uint64_t aux_bytes_out; + /* Count of number of commands executed. */ + uint64_t commands; + /* + * Count of number of error commands. + * These are the commands with a + * non-zero status value. + */ + uint64_t error_commands; + /* + * Compression/Encryption Engine usage, + * the unit is count of clock cycles + */ + uint64_t cce_engine_usage; + /* + * De-Compression/De-cryption Engine usage, + * the unit is count of clock cycles + */ + uint64_t cdd_engine_usage; + uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -24715,15 +39812,15 @@ struct hwrm_cfa_redirect_query_tunnel_type_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/****************************** - * hwrm_tunnel_dst_port_query * - ******************************/ +/*************************** + * hwrm_stat_ctx_clr_stats * + ***************************/ -/* hwrm_tunnel_dst_port_query_input (size:192b/24B) */ -struct hwrm_tunnel_dst_port_query_input { +/* hwrm_stat_ctx_clr_stats_input (size:192b/24B) */ +struct hwrm_stat_ctx_clr_stats_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -24740,7 +39837,8 @@ struct hwrm_tunnel_dst_port_query_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -24751,27 +39849,13 @@ struct hwrm_tunnel_dst_port_query_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* Tunnel Type. */ - uint8_t tunnel_type; - /* Virtual eXtensible Local Area Network (VXLAN) */ - #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_VXLAN \ - UINT32_C(0x1) - /* Generic Network Virtualization Encapsulation (Geneve) */ - #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_GENEVE \ - UINT32_C(0x5) - /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ - #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_VXLAN_V4 \ - UINT32_C(0x9) - /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ - #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_IPGRE_V1 \ - UINT32_C(0xa) - #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_LAST \ - HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_IPGRE_V1 - uint8_t unused_0[7]; -} __attribute__((packed)); + /* ID of the statistics context that is being queried. */ + uint32_t stat_ctx_id; + uint8_t unused_0[4]; +} __rte_packed; -/* hwrm_tunnel_dst_port_query_output (size:128b/16B) */ -struct hwrm_tunnel_dst_port_query_output { +/* hwrm_stat_ctx_clr_stats_output (size:128b/16B) */ +struct hwrm_stat_ctx_clr_stats_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -24780,25 +39864,7 @@ struct hwrm_tunnel_dst_port_query_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* - * This field represents the identifier of L4 destination port - * used for the given tunnel type. This field is valid for - * specific tunnel types that use layer 4 (e.g. UDP) - * transports for tunneling. - */ - uint16_t tunnel_dst_port_id; - /* - * This field represents the value of L4 destination port - * identified by tunnel_dst_port_id. This field is valid for - * specific tunnel types that use layer 4 (e.g. UDP) - * transports for tunneling. - * This field is in network byte order. - * - * A value of 0 means that the destination port is not - * configured. - */ - uint16_t tunnel_dst_port_val; - uint8_t unused_0[3]; + uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -24807,15 +39873,15 @@ struct hwrm_tunnel_dst_port_query_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/****************************** - * hwrm_tunnel_dst_port_alloc * - ******************************/ +/******************** + * hwrm_pcie_qstats * + ********************/ -/* hwrm_tunnel_dst_port_alloc_input (size:192b/24B) */ -struct hwrm_tunnel_dst_port_alloc_input { +/* hwrm_pcie_qstats_input (size:256b/32B) */ +struct hwrm_pcie_qstats_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -24832,7 +39898,8 @@ struct hwrm_tunnel_dst_port_alloc_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -24843,39 +39910,22 @@ struct hwrm_tunnel_dst_port_alloc_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* Tunnel Type. */ - uint8_t tunnel_type; - /* Virtual eXtensible Local Area Network (VXLAN) */ - #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \ - UINT32_C(0x1) - /* Generic Network Virtualization Encapsulation (Geneve) */ - #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \ - UINT32_C(0x5) - /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ - #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \ - UINT32_C(0x9) - /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ - #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \ - UINT32_C(0xa) - #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_LAST \ - HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 - uint8_t unused_0; /* - * This field represents the value of L4 destination port used - * for the given tunnel type. This field is valid for - * specific tunnel types that use layer 4 (e.g. UDP) - * transports for tunneling. - * - * This field is in network byte order. - * - * A value of 0 shall fail the command. + * The size of PCIe statistics block in bytes. + * Firmware will DMA the PCIe statistics to + * the host with this field size in the response. */ - uint16_t tunnel_dst_port_val; - uint8_t unused_1[4]; -} __attribute__((packed)); + uint16_t pcie_stat_size; + uint8_t unused_0[6]; + /* + * This is the host address where + * PCIe statistics will be stored + */ + uint64_t pcie_stat_host_addr; +} __rte_packed; -/* hwrm_tunnel_dst_port_alloc_output (size:128b/16B) */ -struct hwrm_tunnel_dst_port_alloc_output { +/* hwrm_pcie_qstats_output (size:128b/16B) */ +struct hwrm_pcie_qstats_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -24884,11 +39934,8 @@ struct hwrm_tunnel_dst_port_alloc_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* - * Identifier of a tunnel L4 destination port value. Only applies to tunnel - * types that has l4 destination port parameters. - */ - uint16_t tunnel_dst_port_id; + /* The size of PCIe statistics block in bytes. */ + uint16_t pcie_stat_size; uint8_t unused_0[5]; /* * This field is used in Output records to indicate that the output @@ -24898,15 +39945,51 @@ struct hwrm_tunnel_dst_port_alloc_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/***************************** - * hwrm_tunnel_dst_port_free * - *****************************/ +/* PCIe Statistics Formats */ +/* pcie_ctx_hw_stats (size:768b/96B) */ +struct pcie_ctx_hw_stats { + /* Number of physical layer receiver errors */ + uint64_t pcie_pl_signal_integrity; + /* Number of DLLP CRC errors detected by Data Link Layer */ + uint64_t pcie_dl_signal_integrity; + /* + * Number of TLP LCRC and sequence number errors detected + * by Data Link Layer + */ + uint64_t pcie_tl_signal_integrity; + /* Number of times LTSSM entered Recovery state */ + uint64_t pcie_link_integrity; + /* Report number of TLP bits that have been transmitted in Mbps */ + uint64_t pcie_tx_traffic_rate; + /* Report number of TLP bits that have been received in Mbps */ + uint64_t pcie_rx_traffic_rate; + /* Number of DLLP bytes that have been transmitted */ + uint64_t pcie_tx_dllp_statistics; + /* Number of DLLP bytes that have been received */ + uint64_t pcie_rx_dllp_statistics; + /* + * Number of times spent in each phase of gen3 + * equalization + */ + uint64_t pcie_equalization_time; + /* Records the last 16 transitions of the LTSSM */ + uint32_t pcie_ltssm_histogram[4]; + /* + * Record the last 8 reasons on why LTSSM transitioned + * to Recovery + */ + uint64_t pcie_recovery_histogram; +} __rte_packed; +/********************** + * hwrm_exec_fwd_resp * + **********************/ -/* hwrm_tunnel_dst_port_free_input (size:192b/24B) */ -struct hwrm_tunnel_dst_port_free_input { + +/* hwrm_exec_fwd_resp_input (size:1024b/128B) */ +struct hwrm_exec_fwd_resp_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -24923,7 +40006,8 @@ struct hwrm_tunnel_dst_port_free_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -24933,34 +40017,27 @@ struct hwrm_tunnel_dst_port_free_input { * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ - uint64_t resp_addr; - /* Tunnel Type. */ - uint8_t tunnel_type; - /* Virtual eXtensible Local Area Network (VXLAN) */ - #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN \ - UINT32_C(0x1) - /* Generic Network Virtualization Encapsulation (Geneve) */ - #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_GENEVE \ - UINT32_C(0x5) - /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ - #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN_V4 \ - UINT32_C(0x9) - /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ - #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_IPGRE_V1 \ - UINT32_C(0xa) - #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_LAST \ - HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_IPGRE_V1 - uint8_t unused_0; + uint64_t resp_addr; + /* + * This is an encapsulated request. This request should + * be executed by the HWRM and the response should be + * provided in the response buffer inside the encapsulated + * request. + */ + uint32_t encap_request[26]; /* - * Identifier of a tunnel L4 destination port value. Only applies to tunnel - * types that has l4 destination port parameters. + * This value indicates the target id of the response to + * the encapsulated request. + * 0x0 - 0xFFF8 - Used for function ids + * 0xFFF8 - 0xFFFE - Reserved for internal processors + * 0xFFFF - HWRM */ - uint16_t tunnel_dst_port_id; - uint8_t unused_1[4]; -} __attribute__((packed)); + uint16_t encap_resp_target_id; + uint8_t unused_0[6]; +} __rte_packed; -/* hwrm_tunnel_dst_port_free_output (size:128b/16B) */ -struct hwrm_tunnel_dst_port_free_output { +/* hwrm_exec_fwd_resp_output (size:128b/16B) */ +struct hwrm_exec_fwd_resp_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -24969,7 +40046,7 @@ struct hwrm_tunnel_dst_port_free_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - uint8_t unused_1[7]; + uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -24978,60 +40055,15 @@ struct hwrm_tunnel_dst_port_free_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); - -/* Periodic statistics context DMA to host. */ -/* ctx_hw_stats (size:1280b/160B) */ -struct ctx_hw_stats { - /* Number of received unicast packets */ - uint64_t rx_ucast_pkts; - /* Number of received multicast packets */ - uint64_t rx_mcast_pkts; - /* Number of received broadcast packets */ - uint64_t rx_bcast_pkts; - /* Number of discarded packets on received path */ - uint64_t rx_discard_pkts; - /* Number of dropped packets on received path */ - uint64_t rx_drop_pkts; - /* Number of received bytes for unicast traffic */ - uint64_t rx_ucast_bytes; - /* Number of received bytes for multicast traffic */ - uint64_t rx_mcast_bytes; - /* Number of received bytes for broadcast traffic */ - uint64_t rx_bcast_bytes; - /* Number of transmitted unicast packets */ - uint64_t tx_ucast_pkts; - /* Number of transmitted multicast packets */ - uint64_t tx_mcast_pkts; - /* Number of transmitted broadcast packets */ - uint64_t tx_bcast_pkts; - /* Number of discarded packets on transmit path */ - uint64_t tx_discard_pkts; - /* Number of dropped packets on transmit path */ - uint64_t tx_drop_pkts; - /* Number of transmitted bytes for unicast traffic */ - uint64_t tx_ucast_bytes; - /* Number of transmitted bytes for multicast traffic */ - uint64_t tx_mcast_bytes; - /* Number of transmitted bytes for broadcast traffic */ - uint64_t tx_bcast_bytes; - /* Number of TPA packets */ - uint64_t tpa_pkts; - /* Number of TPA bytes */ - uint64_t tpa_bytes; - /* Number of TPA events */ - uint64_t tpa_events; - /* Number of TPA aborts */ - uint64_t tpa_aborts; -} __attribute__((packed)); +} __rte_packed; -/*********************** - * hwrm_stat_ctx_alloc * - ***********************/ +/************************ + * hwrm_reject_fwd_resp * + ************************/ -/* hwrm_stat_ctx_alloc_input (size:256b/32B) */ -struct hwrm_stat_ctx_alloc_input { +/* hwrm_reject_fwd_resp_input (size:1024b/128B) */ +struct hwrm_reject_fwd_resp_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -25048,7 +40080,8 @@ struct hwrm_stat_ctx_alloc_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -25059,36 +40092,26 @@ struct hwrm_stat_ctx_alloc_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* This is the address for statistic block. */ - uint64_t stats_dma_addr; - /* - * The statistic block update period in ms. - * e.g. 250ms, 500ms, 750ms, 1000ms. - * If update_period_ms is 0, then the stats update - * shall be never done and the DMA address shall not be used. - * In this case, the stat block can only be read by - * hwrm_stat_ctx_query command. - */ - uint32_t update_period_ms; /* - * This field is used to specify statistics context specific - * configuration flags. + * This is an encapsulated request. This request should + * be rejected by the HWRM and the error response should be + * provided in the response buffer inside the encapsulated + * request. */ - uint8_t stat_ctx_flags; + uint32_t encap_request[26]; /* - * When this bit is set to '1', the statistics context shall be - * allocated for RoCE traffic only. In this case, traffic other - * than offloaded RoCE traffic shall not be included in this - * statistic context. - * When this bit is set to '0', the statistics context shall be - * used for the network traffic other than offloaded RoCE traffic. + * This value indicates the target id of the response to + * the encapsulated request. + * 0x0 - 0xFFF8 - Used for function ids + * 0xFFF8 - 0xFFFE - Reserved for internal processors + * 0xFFFF - HWRM */ - #define HWRM_STAT_CTX_ALLOC_INPUT_STAT_CTX_FLAGS_ROCE UINT32_C(0x1) - uint8_t unused_0[3]; -} __attribute__((packed)); + uint16_t encap_resp_target_id; + uint8_t unused_0[6]; +} __rte_packed; -/* hwrm_stat_ctx_alloc_output (size:128b/16B) */ -struct hwrm_stat_ctx_alloc_output { +/* hwrm_reject_fwd_resp_output (size:128b/16B) */ +struct hwrm_reject_fwd_resp_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -25097,9 +40120,7 @@ struct hwrm_stat_ctx_alloc_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* This is the statistics context ID value. */ - uint32_t stat_ctx_id; - uint8_t unused_0[3]; + uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -25108,15 +40129,15 @@ struct hwrm_stat_ctx_alloc_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/********************** - * hwrm_stat_ctx_free * - **********************/ +/***************** + * hwrm_fwd_resp * + *****************/ -/* hwrm_stat_ctx_free_input (size:192b/24B) */ -struct hwrm_stat_ctx_free_input { +/* hwrm_fwd_resp_input (size:1024b/128B) */ +struct hwrm_fwd_resp_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -25133,7 +40154,8 @@ struct hwrm_stat_ctx_free_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -25144,13 +40166,41 @@ struct hwrm_stat_ctx_free_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* ID of the statistics context that is being queried. */ - uint32_t stat_ctx_id; - uint8_t unused_0[4]; -} __attribute__((packed)); + /* + * This value indicates the target id of the encapsulated + * response. + * 0x0 - 0xFFF8 - Used for function ids + * 0xFFF8 - 0xFFFE - Reserved for internal processors + * 0xFFFF - HWRM + */ + uint16_t encap_resp_target_id; + /* + * This value indicates the completion ring the encapsulated + * response will be optionally completed on. If the value is + * -1, then no CR completion shall be generated for the + * encapsulated response. Any other value must be a + * valid CR ring_id value. If a valid encap_resp_cmpl_ring + * is provided, then a CR completion shall be generated for + * the encapsulated response. + */ + uint16_t encap_resp_cmpl_ring; + /* This field indicates the length of encapsulated response. */ + uint16_t encap_resp_len; + uint8_t unused_0; + uint8_t unused_1; + /* + * This is the host address where the encapsulated response + * will be written. + * This area must be 16B aligned and must be cleared to zero + * before the original request is made. + */ + uint64_t encap_resp_addr; + /* This is an encapsulated response. */ + uint32_t encap_resp[24]; +} __rte_packed; -/* hwrm_stat_ctx_free_output (size:128b/16B) */ -struct hwrm_stat_ctx_free_output { +/* hwrm_fwd_resp_output (size:128b/16B) */ +struct hwrm_fwd_resp_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -25159,9 +40209,7 @@ struct hwrm_stat_ctx_free_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* This is the statistics context ID value. */ - uint32_t stat_ctx_id; - uint8_t unused_0[3]; + uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -25170,15 +40218,15 @@ struct hwrm_stat_ctx_free_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/*********************** - * hwrm_stat_ctx_query * - ***********************/ +/***************************** + * hwrm_fwd_async_event_cmpl * + *****************************/ -/* hwrm_stat_ctx_query_input (size:192b/24B) */ -struct hwrm_stat_ctx_query_input { +/* hwrm_fwd_async_event_cmpl_input (size:320b/40B) */ +struct hwrm_fwd_async_event_cmpl_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -25195,7 +40243,8 @@ struct hwrm_stat_ctx_query_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -25206,13 +40255,22 @@ struct hwrm_stat_ctx_query_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* ID of the statistics context that is being queried. */ - uint32_t stat_ctx_id; - uint8_t unused_0[4]; -} __attribute__((packed)); + /* + * This value indicates the target id of the encapsulated + * asynchronous event. + * 0x0 - 0xFFF8 - Used for function ids + * 0xFFF8 - 0xFFFE - Reserved for internal processors + * 0xFFFF - Broadcast to all children VFs (only applicable when + * a PF is the requester) + */ + uint16_t encap_async_event_target_id; + uint8_t unused_0[6]; + /* This is an encapsulated asynchronous event completion. */ + uint32_t encap_async_event_cmpl[4]; +} __rte_packed; -/* hwrm_stat_ctx_query_output (size:1408b/176B) */ -struct hwrm_stat_ctx_query_output { +/* hwrm_fwd_async_event_cmpl_output (size:128b/16B) */ +struct hwrm_fwd_async_event_cmpl_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -25220,47 +40278,7 @@ struct hwrm_stat_ctx_query_output { /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ - uint16_t resp_len; - /* Number of transmitted unicast packets */ - uint64_t tx_ucast_pkts; - /* Number of transmitted multicast packets */ - uint64_t tx_mcast_pkts; - /* Number of transmitted broadcast packets */ - uint64_t tx_bcast_pkts; - /* Number of transmitted packets with error */ - uint64_t tx_err_pkts; - /* Number of dropped packets on transmit path */ - uint64_t tx_drop_pkts; - /* Number of transmitted bytes for unicast traffic */ - uint64_t tx_ucast_bytes; - /* Number of transmitted bytes for multicast traffic */ - uint64_t tx_mcast_bytes; - /* Number of transmitted bytes for broadcast traffic */ - uint64_t tx_bcast_bytes; - /* Number of received unicast packets */ - uint64_t rx_ucast_pkts; - /* Number of received multicast packets */ - uint64_t rx_mcast_pkts; - /* Number of received broadcast packets */ - uint64_t rx_bcast_pkts; - /* Number of received packets with error */ - uint64_t rx_err_pkts; - /* Number of dropped packets on received path */ - uint64_t rx_drop_pkts; - /* Number of received bytes for unicast traffic */ - uint64_t rx_ucast_bytes; - /* Number of received bytes for multicast traffic */ - uint64_t rx_mcast_bytes; - /* Number of received bytes for broadcast traffic */ - uint64_t rx_bcast_bytes; - /* Number of aggregated unicast packets */ - uint64_t rx_agg_pkts; - /* Number of aggregated unicast bytes */ - uint64_t rx_agg_bytes; - /* Number of aggregation events */ - uint64_t rx_agg_events; - /* Number of aborted aggregations */ - uint64_t rx_agg_aborts; + uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output @@ -25270,15 +40288,15 @@ struct hwrm_stat_ctx_query_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/*************************** - * hwrm_stat_ctx_clr_stats * - ***************************/ +/************************** + * hwrm_nvm_raw_write_blk * + **************************/ -/* hwrm_stat_ctx_clr_stats_input (size:192b/24B) */ -struct hwrm_stat_ctx_clr_stats_input { +/* hwrm_nvm_raw_write_blk_input (size:256b/32B) */ +struct hwrm_nvm_raw_write_blk_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -25295,7 +40313,8 @@ struct hwrm_stat_ctx_clr_stats_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -25306,13 +40325,22 @@ struct hwrm_stat_ctx_clr_stats_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* ID of the statistics context that is being queried. */ - uint32_t stat_ctx_id; - uint8_t unused_0[4]; -} __attribute__((packed)); + /* + * 64-bit Host Source Address. + * This is the location of the source data to be written. + */ + uint64_t host_src_addr; + /* + * 32-bit Destination Address. + * This is the NVRAM byte-offset where the source data will be written to. + */ + uint32_t dest_addr; + /* Length of data to be written, in bytes. */ + uint32_t len; +} __rte_packed; -/* hwrm_stat_ctx_clr_stats_output (size:128b/16B) */ -struct hwrm_stat_ctx_clr_stats_output { +/* hwrm_nvm_raw_write_blk_output (size:128b/16B) */ +struct hwrm_nvm_raw_write_blk_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -25330,15 +40358,15 @@ struct hwrm_stat_ctx_clr_stats_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/******************** - * hwrm_pcie_qstats * - ********************/ +/***************** + * hwrm_nvm_read * + *****************/ -/* hwrm_pcie_qstats_input (size:256b/32B) */ -struct hwrm_pcie_qstats_input { +/* hwrm_nvm_read_input (size:320b/40B) */ +struct hwrm_nvm_read_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -25355,7 +40383,8 @@ struct hwrm_pcie_qstats_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -25367,21 +40396,22 @@ struct hwrm_pcie_qstats_input { */ uint64_t resp_addr; /* - * The size of PCIe statistics block in bytes. - * Firmware will DMA the PCIe statistics to - * the host with this field size in the response. - */ - uint16_t pcie_stat_size; - uint8_t unused_0[6]; - /* - * This is the host address where - * PCIe statistics will be stored + * 64-bit Host Destination Address. + * This is the host address where the data will be written to. */ - uint64_t pcie_stat_host_addr; -} __attribute__((packed)); + uint64_t host_dest_addr; + /* The 0-based index of the directory entry. */ + uint16_t dir_idx; + uint8_t unused_0[2]; + /* The NVRAM byte-offset to read from. */ + uint32_t offset; + /* The length of the data to be read, in bytes. */ + uint32_t len; + uint8_t unused_1[4]; +} __rte_packed; -/* hwrm_pcie_qstats_output (size:128b/16B) */ -struct hwrm_pcie_qstats_output { +/* hwrm_nvm_read_output (size:128b/16B) */ +struct hwrm_nvm_read_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -25390,9 +40420,7 @@ struct hwrm_pcie_qstats_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* The size of PCIe statistics block in bytes. */ - uint16_t pcie_stat_size; - uint8_t unused_0[5]; + uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -25401,51 +40429,15 @@ struct hwrm_pcie_qstats_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); - -/* PCIe Statistics Formats */ -/* pcie_ctx_hw_stats (size:768b/96B) */ -struct pcie_ctx_hw_stats { - /* Number of physical layer receiver errors */ - uint64_t pcie_pl_signal_integrity; - /* Number of DLLP CRC errors detected by Data Link Layer */ - uint64_t pcie_dl_signal_integrity; - /* - * Number of TLP LCRC and sequence number errors detected - * by Data Link Layer - */ - uint64_t pcie_tl_signal_integrity; - /* Number of times LTSSM entered Recovery state */ - uint64_t pcie_link_integrity; - /* Number of TLP bytes that have been trasmitted */ - uint64_t pcie_tx_traffic_rate; - /* Number of TLP bytes that have been received */ - uint64_t pcie_rx_traffic_rate; - /* Number of DLLP bytes that have been trasmitted */ - uint64_t pcie_tx_dllp_statistics; - /* Number of DLLP bytes that have been received */ - uint64_t pcie_rx_dllp_statistics; - /* - * Number of times spent in each phase of gen3 - * equalization - */ - uint64_t pcie_equalization_time; - /* Records the last 16 transitions of the LTSSM */ - uint32_t pcie_ltssm_histogram[4]; - /* - * Record the last 8 reasons on why LTSSM transitioned - * to Recovery - */ - uint64_t pcie_recovery_histogram; -} __attribute__((packed)); +} __rte_packed; -/********************** - * hwrm_exec_fwd_resp * - **********************/ +/********************* + * hwrm_nvm_raw_dump * + *********************/ -/* hwrm_exec_fwd_resp_input (size:1024b/128B) */ -struct hwrm_exec_fwd_resp_input { +/* hwrm_nvm_raw_dump_input (size:256b/32B) */ +struct hwrm_nvm_raw_dump_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -25462,7 +40454,8 @@ struct hwrm_exec_fwd_resp_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -25474,25 +40467,18 @@ struct hwrm_exec_fwd_resp_input { */ uint64_t resp_addr; /* - * This is an encapsulated request. This request should - * be executed by the HWRM and the response should be - * provided in the response buffer inside the encapsulated - * request. - */ - uint32_t encap_request[26]; - /* - * This value indicates the target id of the response to - * the encapsulated request. - * 0x0 - 0xFFF8 - Used for function ids - * 0xFFF8 - 0xFFFE - Reserved for internal processors - * 0xFFFF - HWRM + * 64-bit Host Destination Address. + * This is the host address where the data will be written to. */ - uint16_t encap_resp_target_id; - uint8_t unused_0[6]; -} __attribute__((packed)); + uint64_t host_dest_addr; + /* 32-bit NVRAM byte-offset to read from. */ + uint32_t offset; + /* Total length of NVRAM contents to be read, in bytes. */ + uint32_t len; +} __rte_packed; -/* hwrm_exec_fwd_resp_output (size:128b/16B) */ -struct hwrm_exec_fwd_resp_output { +/* hwrm_nvm_raw_dump_output (size:128b/16B) */ +struct hwrm_nvm_raw_dump_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -25510,15 +40496,15 @@ struct hwrm_exec_fwd_resp_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/************************ - * hwrm_reject_fwd_resp * - ************************/ +/**************************** + * hwrm_nvm_get_dir_entries * + ****************************/ -/* hwrm_reject_fwd_resp_input (size:1024b/128B) */ -struct hwrm_reject_fwd_resp_input { +/* hwrm_nvm_get_dir_entries_input (size:192b/24B) */ +struct hwrm_nvm_get_dir_entries_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -25535,7 +40521,8 @@ struct hwrm_reject_fwd_resp_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -25547,25 +40534,14 @@ struct hwrm_reject_fwd_resp_input { */ uint64_t resp_addr; /* - * This is an encapsulated request. This request should - * be rejected by the HWRM and the error response should be - * provided in the response buffer inside the encapsulated - * request. - */ - uint32_t encap_request[26]; - /* - * This value indicates the target id of the response to - * the encapsulated request. - * 0x0 - 0xFFF8 - Used for function ids - * 0xFFF8 - 0xFFFE - Reserved for internal processors - * 0xFFFF - HWRM + * 64-bit Host Destination Address. + * This is the host address where the directory will be written. */ - uint16_t encap_resp_target_id; - uint8_t unused_0[6]; -} __attribute__((packed)); + uint64_t host_dest_addr; +} __rte_packed; -/* hwrm_reject_fwd_resp_output (size:128b/16B) */ -struct hwrm_reject_fwd_resp_output { +/* hwrm_nvm_get_dir_entries_output (size:128b/16B) */ +struct hwrm_nvm_get_dir_entries_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -25583,15 +40559,15 @@ struct hwrm_reject_fwd_resp_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/***************** - * hwrm_fwd_resp * - *****************/ +/************************* + * hwrm_nvm_get_dir_info * + *************************/ -/* hwrm_fwd_resp_input (size:1024b/128B) */ -struct hwrm_fwd_resp_input { +/* hwrm_nvm_get_dir_info_input (size:128b/16B) */ +struct hwrm_nvm_get_dir_info_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -25608,7 +40584,8 @@ struct hwrm_fwd_resp_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -25619,41 +40596,10 @@ struct hwrm_fwd_resp_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* - * This value indicates the target id of the encapsulated - * response. - * 0x0 - 0xFFF8 - Used for function ids - * 0xFFF8 - 0xFFFE - Reserved for internal processors - * 0xFFFF - HWRM - */ - uint16_t encap_resp_target_id; - /* - * This value indicates the completion ring the encapsulated - * response will be optionally completed on. If the value is - * -1, then no CR completion shall be generated for the - * encapsulated response. Any other value must be a - * valid CR ring_id value. If a valid encap_resp_cmpl_ring - * is provided, then a CR completion shall be generated for - * the encapsulated response. - */ - uint16_t encap_resp_cmpl_ring; - /* This field indicates the length of encapsulated response. */ - uint16_t encap_resp_len; - uint8_t unused_0; - uint8_t unused_1; - /* - * This is the host address where the encapsulated response - * will be written. - * This area must be 16B aligned and must be cleared to zero - * before the original request is made. - */ - uint64_t encap_resp_addr; - /* This is an encapsulated response. */ - uint32_t encap_resp[24]; -} __attribute__((packed)); +} __rte_packed; -/* hwrm_fwd_resp_output (size:128b/16B) */ -struct hwrm_fwd_resp_output { +/* hwrm_nvm_get_dir_info_output (size:192b/24B) */ +struct hwrm_nvm_get_dir_info_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -25662,6 +40608,10 @@ struct hwrm_fwd_resp_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; + /* Number of directory entries in the directory. */ + uint32_t entries; + /* Size of each directory entry, in bytes. */ + uint32_t entry_length; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output @@ -25671,15 +40621,15 @@ struct hwrm_fwd_resp_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/***************************** - * hwrm_fwd_async_event_cmpl * - *****************************/ +/****************** + * hwrm_nvm_write * + ******************/ -/* hwrm_fwd_async_event_cmpl_input (size:320b/40B) */ -struct hwrm_fwd_async_event_cmpl_input { +/* hwrm_nvm_write_input (size:384b/48B) */ +struct hwrm_nvm_write_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -25696,7 +40646,8 @@ struct hwrm_fwd_async_event_cmpl_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -25706,23 +40657,50 @@ struct hwrm_fwd_async_event_cmpl_input { * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ - uint64_t resp_addr; + uint64_t resp_addr; + /* + * 64-bit Host Source Address. + * This is where the source data is. + */ + uint64_t host_src_addr; + /* The Directory Entry Type (valid values are defined in the bnxnvm_directory_type enum defined in the file bnxnvm_defs.h). */ + uint16_t dir_type; + /* + * Directory ordinal. + * The 0-based instance of the combined Directory Entry Type and Extension. + */ + uint16_t dir_ordinal; + /* The Directory Entry Extension flags (see BNX_DIR_EXT_* in the file bnxnvm_defs.h). */ + uint16_t dir_ext; + /* Directory Entry Attribute flags (see BNX_DIR_ATTR_* in the file bnxnvm_defs.h). */ + uint16_t dir_attr; + /* + * Length of data to write, in bytes. May be less than or equal to the allocated size for the directory entry. + * The data length stored in the directory entry will be updated to reflect this value once the write is complete. + */ + uint32_t dir_data_length; + /* Option. */ + uint16_t option; + uint16_t flags; + /* + * When this bit is '1', the original active image + * will not be removed. TBD: what purpose is this? + */ + #define HWRM_NVM_WRITE_INPUT_FLAGS_KEEP_ORIG_ACTIVE_IMG \ + UINT32_C(0x1) /* - * This value indicates the target id of the encapsulated - * asynchronous event. - * 0x0 - 0xFFF8 - Used for function ids - * 0xFFF8 - 0xFFFE - Reserved for internal processors - * 0xFFFF - Broadcast to all children VFs (only applicable when - * a PF is the requester) + * The requested length of the allocated NVM for the item, in bytes. This value may be greater than or equal to the specified data length (dir_data_length). + * If this value is less than the specified data length, it will be ignored. + * The response will contain the actual allocated item length, which may be greater than the requested item length. + * The purpose for allocating more than the required number of bytes for an item's data is to pre-allocate extra storage (padding) to accommodate + * the potential future growth of an item (e.g. upgraded firmware with a size increase, log growth, expanded configuration data). */ - uint16_t encap_async_event_target_id; - uint8_t unused_0[6]; - /* This is an encapsulated asynchronous event completion. */ - uint32_t encap_async_event_cmpl[4]; -} __attribute__((packed)); + uint32_t dir_item_length; + uint32_t unused_0; +} __rte_packed; -/* hwrm_fwd_async_event_cmpl_output (size:128b/16B) */ -struct hwrm_fwd_async_event_cmpl_output { +/* hwrm_nvm_write_output (size:128b/16B) */ +struct hwrm_nvm_write_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -25731,7 +40709,14 @@ struct hwrm_fwd_async_event_cmpl_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - uint8_t unused_0[7]; + /* + * Length of the allocated NVM for the item, in bytes. The value may be greater than or equal to the specified data length or the requested item length. + * The actual item length used when creating a new directory entry will be a multiple of an NVM block size. + */ + uint32_t dir_item_length; + /* The directory index of the created or modified item. */ + uint16_t dir_idx; + uint8_t unused_0; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -25740,15 +40725,33 @@ struct hwrm_fwd_async_event_cmpl_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/************************** - * hwrm_nvm_raw_write_blk * - **************************/ +/* hwrm_nvm_write_cmd_err (size:64b/8B) */ +struct hwrm_nvm_write_cmd_err { + /* + * command specific error codes that goes to + * the cmd_err field in Common HWRM Error Response. + */ + uint8_t code; + /* Unknown error */ + #define HWRM_NVM_WRITE_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0) + /* Unable to complete operation due to fragmentation */ + #define HWRM_NVM_WRITE_CMD_ERR_CODE_FRAG_ERR UINT32_C(0x1) + /* nvm is completely full. */ + #define HWRM_NVM_WRITE_CMD_ERR_CODE_NO_SPACE UINT32_C(0x2) + #define HWRM_NVM_WRITE_CMD_ERR_CODE_LAST \ + HWRM_NVM_WRITE_CMD_ERR_CODE_NO_SPACE + uint8_t unused_0[7]; +} __rte_packed; + +/******************* + * hwrm_nvm_modify * + *******************/ -/* hwrm_nvm_raw_write_blk_input (size:256b/32B) */ -struct hwrm_nvm_raw_write_blk_input { +/* hwrm_nvm_modify_input (size:320b/40B) */ +struct hwrm_nvm_modify_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -25765,7 +40768,8 @@ struct hwrm_nvm_raw_write_blk_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -25778,20 +40782,40 @@ struct hwrm_nvm_raw_write_blk_input { uint64_t resp_addr; /* * 64-bit Host Source Address. - * This is the loation of the source data to be written. + * This is where the modified data is. */ uint64_t host_src_addr; + /* 16-bit directory entry index. */ + uint16_t dir_idx; + uint16_t flags; /* - * 32-bit Destination Address. - * This is the NVRAM byte-offset where the source data will be written to. + * This flag indicates the sender wants to modify a continuous NVRAM + * area using a batch of this HWRM requests. The offset of a request + * must be continuous to the end of previous request's. Firmware does + * not update the directory entry until receiving the last request, + * which is indicated by the batch_last flag. + * This flag is set usually when a sender does not have a block of + * memory that is big enough to hold the entire NVRAM data for send + * at one time. + */ + #define HWRM_NVM_MODIFY_INPUT_FLAGS_BATCH_MODE UINT32_C(0x1) + /* + * This flag can be used only when the batch_mode flag is set. + * It indicates this request is the last of batch requests. + */ + #define HWRM_NVM_MODIFY_INPUT_FLAGS_BATCH_LAST UINT32_C(0x2) + /* 32-bit NVRAM byte-offset to modify content from. */ + uint32_t offset; + /* + * Length of data to be modified, in bytes. The length shall + * be non-zero. */ - uint32_t dest_addr; - /* Length of data to be written, in bytes. */ uint32_t len; -} __attribute__((packed)); + uint8_t unused_1[4]; +} __rte_packed; -/* hwrm_nvm_raw_write_blk_output (size:128b/16B) */ -struct hwrm_nvm_raw_write_blk_output { +/* hwrm_nvm_modify_output (size:128b/16B) */ +struct hwrm_nvm_modify_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -25809,15 +40833,15 @@ struct hwrm_nvm_raw_write_blk_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/***************** - * hwrm_nvm_read * - *****************/ +/*************************** + * hwrm_nvm_find_dir_entry * + ***************************/ -/* hwrm_nvm_read_input (size:320b/40B) */ -struct hwrm_nvm_read_input { +/* hwrm_nvm_find_dir_entry_input (size:256b/32B) */ +struct hwrm_nvm_find_dir_entry_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -25834,7 +40858,8 @@ struct hwrm_nvm_read_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -25845,23 +40870,42 @@ struct hwrm_nvm_read_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; + uint32_t enables; /* - * 64-bit Host Destination Address. - * This is the host address where the data will be written to. + * This bit must be '1' for the dir_idx_valid field to be + * configured. */ - uint64_t host_dest_addr; - /* The 0-based index of the directory entry. */ + #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_ENABLES_DIR_IDX_VALID \ + UINT32_C(0x1) + /* Directory Entry Index */ uint16_t dir_idx; - uint8_t unused_0[2]; - /* The NVRAM byte-offset to read from. */ - uint32_t offset; - /* The length of the data to be read, in bytes. */ - uint32_t len; - uint8_t unused_1[4]; -} __attribute__((packed)); + /* Directory Entry (Image) Type */ + uint16_t dir_type; + /* + * Directory ordinal. + * The instance of this Directory Type + */ + uint16_t dir_ordinal; + /* The Directory Entry Extension flags. */ + uint16_t dir_ext; + /* This value indicates the search option using dir_ordinal. */ + uint8_t opt_ordinal; + /* This value indicates the search option using dir_ordinal. */ + #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_MASK UINT32_C(0x3) + #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_SFT 0 + /* Equal to specified ordinal value. */ + #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_EQ UINT32_C(0x0) + /* Greater than or equal to specified ordinal value */ + #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_GE UINT32_C(0x1) + /* Greater than specified ordinal value */ + #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_GT UINT32_C(0x2) + #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_LAST \ + HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_GT + uint8_t unused_0[3]; +} __rte_packed; -/* hwrm_nvm_read_output (size:128b/16B) */ -struct hwrm_nvm_read_output { +/* hwrm_nvm_find_dir_entry_output (size:256b/32B) */ +struct hwrm_nvm_find_dir_entry_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -25870,6 +40914,19 @@ struct hwrm_nvm_read_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; + /* Allocated NVRAM for this directory entry, in bytes. */ + uint32_t dir_item_length; + /* Size of the stored data for this directory entry, in bytes. */ + uint32_t dir_data_length; + /* + * Firmware version. + * Only valid if the directory entry is for embedded firmware stored in APE_BIN Format. + */ + uint32_t fw_ver; + /* Directory ordinal. */ + uint16_t dir_ordinal; + /* Directory Entry Index */ + uint16_t dir_idx; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output @@ -25879,15 +40936,15 @@ struct hwrm_nvm_read_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/********************* - * hwrm_nvm_raw_dump * - *********************/ +/**************************** + * hwrm_nvm_erase_dir_entry * + ****************************/ -/* hwrm_nvm_raw_dump_input (size:256b/32B) */ -struct hwrm_nvm_raw_dump_input { +/* hwrm_nvm_erase_dir_entry_input (size:192b/24B) */ +struct hwrm_nvm_erase_dir_entry_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -25904,7 +40961,8 @@ struct hwrm_nvm_raw_dump_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -25915,19 +40973,13 @@ struct hwrm_nvm_raw_dump_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* - * 64-bit Host Destination Address. - * This is the host address where the data will be written to. - */ - uint64_t host_dest_addr; - /* 32-bit NVRAM byte-offset to read from. */ - uint32_t offset; - /* Total length of NVRAM contents to be read, in bytes. */ - uint32_t len; -} __attribute__((packed)); + /* Directory Entry Index */ + uint16_t dir_idx; + uint8_t unused_0[6]; +} __rte_packed; -/* hwrm_nvm_raw_dump_output (size:128b/16B) */ -struct hwrm_nvm_raw_dump_output { +/* hwrm_nvm_erase_dir_entry_output (size:128b/16B) */ +struct hwrm_nvm_erase_dir_entry_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -25945,15 +40997,15 @@ struct hwrm_nvm_raw_dump_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/**************************** - * hwrm_nvm_get_dir_entries * - ****************************/ +/************************* + * hwrm_nvm_get_dev_info * + *************************/ -/* hwrm_nvm_get_dir_entries_input (size:192b/24B) */ -struct hwrm_nvm_get_dir_entries_input { +/* hwrm_nvm_get_dev_info_input (size:128b/16B) */ +struct hwrm_nvm_get_dev_info_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -25970,7 +41022,8 @@ struct hwrm_nvm_get_dir_entries_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -25981,15 +41034,10 @@ struct hwrm_nvm_get_dir_entries_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* - * 64-bit Host Destination Address. - * This is the host address where the directory will be written. - */ - uint64_t host_dest_addr; -} __attribute__((packed)); +} __rte_packed; -/* hwrm_nvm_get_dir_entries_output (size:128b/16B) */ -struct hwrm_nvm_get_dir_entries_output { +/* hwrm_nvm_get_dev_info_output (size:256b/32B) */ +struct hwrm_nvm_get_dev_info_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -25998,7 +41046,23 @@ struct hwrm_nvm_get_dir_entries_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - uint8_t unused_0[7]; + /* Manufacturer ID. */ + uint16_t manufacturer_id; + /* Device ID. */ + uint16_t device_id; + /* Sector size of the NVRAM device. */ + uint32_t sector_size; + /* Total size, in bytes of the NVRAM device. */ + uint32_t nvram_size; + uint32_t reserved_size; + /* Available size that can be used, in bytes. Available size is the NVRAM size take away the used size and reserved size. */ + uint32_t available_size; + /* This field represents the major version of NVM cfg */ + uint8_t nvm_cfg_ver_maj; + /* This field represents the minor version of NVM cfg */ + uint8_t nvm_cfg_ver_min; + /* This field represents the update version of NVM cfg */ + uint8_t nvm_cfg_ver_upd; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -26007,15 +41071,15 @@ struct hwrm_nvm_get_dir_entries_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/************************* - * hwrm_nvm_get_dir_info * - *************************/ +/************************** + * hwrm_nvm_mod_dir_entry * + **************************/ -/* hwrm_nvm_get_dir_info_input (size:128b/16B) */ -struct hwrm_nvm_get_dir_info_input { +/* hwrm_nvm_mod_dir_entry_input (size:256b/32B) */ +struct hwrm_nvm_mod_dir_entry_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -26032,7 +41096,8 @@ struct hwrm_nvm_get_dir_info_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -26043,10 +41108,32 @@ struct hwrm_nvm_get_dir_info_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; -} __attribute__((packed)); + uint32_t enables; + /* + * This bit must be '1' for the checksum field to be + * configured. + */ + #define HWRM_NVM_MOD_DIR_ENTRY_INPUT_ENABLES_CHECKSUM UINT32_C(0x1) + /* Directory Entry Index */ + uint16_t dir_idx; + /* + * Directory ordinal. + * The (0-based) instance of this Directory Type. + */ + uint16_t dir_ordinal; + /* The Directory Entry Extension flags (see BNX_DIR_EXT_* for extension flag definitions). */ + uint16_t dir_ext; + /* Directory Entry Attribute flags (see BNX_DIR_ATTR_* for attribute flag definitions). */ + uint16_t dir_attr; + /* + * If valid, then this field updates the checksum + * value of the content in the directory entry. + */ + uint32_t checksum; +} __rte_packed; -/* hwrm_nvm_get_dir_info_output (size:192b/24B) */ -struct hwrm_nvm_get_dir_info_output { +/* hwrm_nvm_mod_dir_entry_output (size:128b/16B) */ +struct hwrm_nvm_mod_dir_entry_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -26055,10 +41142,6 @@ struct hwrm_nvm_get_dir_info_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* Number of directory entries in the directory. */ - uint32_t entries; - /* Size of each directory entry, in bytes. */ - uint32_t entry_length; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output @@ -26068,15 +41151,15 @@ struct hwrm_nvm_get_dir_info_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); - -/****************** - * hwrm_nvm_write * - ******************/ +} __rte_packed; +/************************** + * hwrm_nvm_verify_update * + **************************/ -/* hwrm_nvm_write_input (size:384b/48B) */ -struct hwrm_nvm_write_input { + +/* hwrm_nvm_verify_update_input (size:192b/24B) */ +struct hwrm_nvm_verify_update_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -26093,7 +41176,8 @@ struct hwrm_nvm_write_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -26104,49 +41188,26 @@ struct hwrm_nvm_write_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* - * 64-bit Host Source Address. - * This is where the source data is. - */ - uint64_t host_src_addr; - /* The Directory Entry Type (valid values are defined in the bnxnvm_directory_type enum defined in the file bnxnvm_defs.h). */ + /* Directory Entry Type, to be verified. */ uint16_t dir_type; /* * Directory ordinal. - * The 0-based instance of the combined Directory Entry Type and Extension. + * The instance of the Directory Type to be verified. */ uint16_t dir_ordinal; - /* The Directory Entry Extension flags (see BNX_DIR_EXT_* in the file bnxnvm_defs.h). */ - uint16_t dir_ext; - /* Directory Entry Attribute flags (see BNX_DIR_ATTR_* in the file bnxnvm_defs.h). */ - uint16_t dir_attr; - /* - * Length of data to write, in bytes. May be less than or equal to the allocated size for the directory entry. - * The data length stored in the directory entry will be updated to reflect this value once the write is complete. - */ - uint32_t dir_data_length; - /* Option. */ - uint16_t option; - uint16_t flags; - /* - * When this bit is '1', the original active image - * will not be removed. TBD: what purpose is this? - */ - #define HWRM_NVM_WRITE_INPUT_FLAGS_KEEP_ORIG_ACTIVE_IMG \ - UINT32_C(0x1) /* - * The requested length of the allocated NVM for the item, in bytes. This value may be greater than or equal to the specified data length (dir_data_length). - * If this value is less than the specified data length, it will be ignored. - * The response will contain the actual allocated item length, which may be greater than the requested item length. - * The purpose for allocating more than the required number of bytes for an item's data is to pre-allocate extra storage (padding) to accomodate - * the potential future growth of an item (e.g. upgraded firmware with a size increase, log growth, expanded configuration data). + * The Directory Entry Extension flags. + * The "UPDATE" extension flag must be set in this value. + * A corresponding directory entry with the same type and ordinal values but *without* + * the "UPDATE" extension flag must also exist. The other flags of the extension must + * be identical between the active and update entries. */ - uint32_t dir_item_length; - uint32_t unused_0; -} __attribute__((packed)); + uint16_t dir_ext; + uint8_t unused_0[2]; +} __rte_packed; -/* hwrm_nvm_write_output (size:128b/16B) */ -struct hwrm_nvm_write_output { +/* hwrm_nvm_verify_update_output (size:128b/16B) */ +struct hwrm_nvm_verify_update_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -26155,14 +41216,7 @@ struct hwrm_nvm_write_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* - * Length of the allocated NVM for the item, in bytes. The value may be greater than or equal to the specified data length or the requested item length. - * The actual item length used when creating a new directory entry will be a multiple of an NVM block size. - */ - uint32_t dir_item_length; - /* The directory index of the created or modified item. */ - uint16_t dir_idx; - uint8_t unused_0; + uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -26171,33 +41225,15 @@ struct hwrm_nvm_write_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); - -/* hwrm_nvm_write_cmd_err (size:64b/8B) */ -struct hwrm_nvm_write_cmd_err { - /* - * command specific error codes that goes to - * the cmd_err field in Common HWRM Error Response. - */ - uint8_t code; - /* Unknown error */ - #define HWRM_NVM_WRITE_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0) - /* Unable to complete operation due to fragmentation */ - #define HWRM_NVM_WRITE_CMD_ERR_CODE_FRAG_ERR UINT32_C(0x1) - /* nvm is completely full. */ - #define HWRM_NVM_WRITE_CMD_ERR_CODE_NO_SPACE UINT32_C(0x2) - #define HWRM_NVM_WRITE_CMD_ERR_CODE_LAST \ - HWRM_NVM_WRITE_CMD_ERR_CODE_NO_SPACE - uint8_t unused_0[7]; -} __attribute__((packed)); +} __rte_packed; -/******************* - * hwrm_nvm_modify * - *******************/ +/*************************** + * hwrm_nvm_install_update * + ***************************/ -/* hwrm_nvm_modify_input (size:320b/40B) */ -struct hwrm_nvm_modify_input { +/* hwrm_nvm_install_update_input (size:192b/24B) */ +struct hwrm_nvm_install_update_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -26214,7 +41250,8 @@ struct hwrm_nvm_modify_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -26226,25 +41263,56 @@ struct hwrm_nvm_modify_input { */ uint64_t resp_addr; /* - * 64-bit Host Source Address. - * This is where the modified data is. + * Installation type. If the value 3 through 0xffff is used, + * only packaged items with that type value will be installed and + * conditional installation directives for those packaged items + * will be over-ridden (i.e. 'create' or 'replace' will be treated + * as 'install'). */ - uint64_t host_src_addr; - /* 16-bit directory entry index. */ - uint16_t dir_idx; - uint8_t unused_0[2]; - /* 32-bit NVRAM byte-offset to modify content from. */ - uint32_t offset; + uint32_t install_type; /* - * Length of data to be modified, in bytes. The length shall - * be non-zero. + * Perform a normal package installation. Conditional installation + * directives (e.g. 'create' and 'replace') of packaged items + * will be followed. */ - uint32_t len; - uint8_t unused_1[4]; -} __attribute__((packed)); + #define HWRM_NVM_INSTALL_UPDATE_INPUT_INSTALL_TYPE_NORMAL UINT32_C(0x0) + /* + * Install all packaged items regardless of installation directive + * (i.e. treat all packaged items as though they have an installation + * directive of 'install'). + */ + #define HWRM_NVM_INSTALL_UPDATE_INPUT_INSTALL_TYPE_ALL \ + UINT32_C(0xffffffff) + #define HWRM_NVM_INSTALL_UPDATE_INPUT_INSTALL_TYPE_LAST \ + HWRM_NVM_INSTALL_UPDATE_INPUT_INSTALL_TYPE_ALL + uint16_t flags; + /* If set to 1, then securely erase all unused locations in persistent storage. */ + #define HWRM_NVM_INSTALL_UPDATE_INPUT_FLAGS_ERASE_UNUSED_SPACE \ + UINT32_C(0x1) + /* + * If set to 1, then unspecified images, images not in the package file, will be safely deleted. + * When combined with erase_unused_space then unspecified images will be securely erased. + */ + #define HWRM_NVM_INSTALL_UPDATE_INPUT_FLAGS_REMOVE_UNUSED_PKG \ + UINT32_C(0x2) + /* + * If set to 1, FW will defragment the NVM if defragmentation is required for the update. + * Allow additional time for this command to complete if this bit is set to 1. + */ + #define HWRM_NVM_INSTALL_UPDATE_INPUT_FLAGS_ALLOWED_TO_DEFRAG \ + UINT32_C(0x4) + /* + * If set to 1, FW will verify the package in the "UPDATE" NVM item + * without installing it. This flag is for FW internal use only. + * Users should not set this flag. The request will otherwise fail. + */ + #define HWRM_NVM_INSTALL_UPDATE_INPUT_FLAGS_VERIFY_ONLY \ + UINT32_C(0x8) + uint8_t unused_0[2]; +} __rte_packed; -/* hwrm_nvm_modify_output (size:128b/16B) */ -struct hwrm_nvm_modify_output { +/* hwrm_nvm_install_update_output (size:192b/24B) */ +struct hwrm_nvm_install_update_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -26253,7 +41321,55 @@ struct hwrm_nvm_modify_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - uint8_t unused_0[7]; + /* + * Bit-mask of successfully installed items. + * Bit-0 corresponding to the first packaged item, Bit-1 for the second item, etc. + * A value of 0 indicates that no items were successfully installed. + */ + uint64_t installed_items; + /* result is 8 b */ + uint8_t result; + /* There was no problem with the package installation. */ + #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESULT_SUCCESS UINT32_C(0x0) + #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESULT_LAST \ + HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESULT_SUCCESS + /* problem_item is 8 b */ + uint8_t problem_item; + /* There was no problem with any packaged items. */ + #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_PROBLEM_ITEM_NONE \ + UINT32_C(0x0) + /* There was a problem with the NVM package itself. */ + #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_PROBLEM_ITEM_PACKAGE \ + UINT32_C(0xff) + #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_PROBLEM_ITEM_LAST \ + HWRM_NVM_INSTALL_UPDATE_OUTPUT_PROBLEM_ITEM_PACKAGE + /* reset_required is 8 b */ + uint8_t reset_required; + /* + * No reset is required for installed/updated firmware or + * microcode to take effect. + */ + #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESET_REQUIRED_NONE \ + UINT32_C(0x0) + /* + * A PCIe reset (e.g. system reboot) is + * required for newly installed/updated firmware or + * microcode to take effect. + */ + #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESET_REQUIRED_PCI \ + UINT32_C(0x1) + /* + * A controller power reset (e.g. system power-cycle) is + * required for newly installed/updated firmware or + * microcode to take effect. Some newly installed/updated + * firmware or microcode may still take effect upon the + * next PCIe reset. + */ + #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESET_REQUIRED_POWER \ + UINT32_C(0x2) + #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESET_REQUIRED_LAST \ + HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESET_REQUIRED_POWER + uint8_t unused_0[4]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -26262,15 +41378,33 @@ struct hwrm_nvm_modify_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/*************************** - * hwrm_nvm_find_dir_entry * - ***************************/ +/* hwrm_nvm_install_update_cmd_err (size:64b/8B) */ +struct hwrm_nvm_install_update_cmd_err { + /* + * command specific error codes that goes to + * the cmd_err field in Common HWRM Error Response. + */ + uint8_t code; + /* Unknown error */ + #define HWRM_NVM_INSTALL_UPDATE_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0) + /* Unable to complete operation due to fragmentation */ + #define HWRM_NVM_INSTALL_UPDATE_CMD_ERR_CODE_FRAG_ERR UINT32_C(0x1) + /* nvm is completely full. */ + #define HWRM_NVM_INSTALL_UPDATE_CMD_ERR_CODE_NO_SPACE UINT32_C(0x2) + #define HWRM_NVM_INSTALL_UPDATE_CMD_ERR_CODE_LAST \ + HWRM_NVM_INSTALL_UPDATE_CMD_ERR_CODE_NO_SPACE + uint8_t unused_0[7]; +} __rte_packed; + +/****************** + * hwrm_nvm_flush * + ******************/ -/* hwrm_nvm_find_dir_entry_input (size:256b/32B) */ -struct hwrm_nvm_find_dir_entry_input { +/* hwrm_nvm_flush_input (size:128b/16B) */ +struct hwrm_nvm_flush_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -26287,7 +41421,8 @@ struct hwrm_nvm_find_dir_entry_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -26296,44 +41431,12 @@ struct hwrm_nvm_find_dir_entry_input { * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. - */ - uint64_t resp_addr; - uint32_t enables; - /* - * This bit must be '1' for the dir_idx_valid field to be - * configured. - */ - #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_ENABLES_DIR_IDX_VALID \ - UINT32_C(0x1) - /* Directory Entry Index */ - uint16_t dir_idx; - /* Directory Entry (Image) Type */ - uint16_t dir_type; - /* - * Directory ordinal. - * The instance of this Directory Type - */ - uint16_t dir_ordinal; - /* The Directory Entry Extension flags. */ - uint16_t dir_ext; - /* This value indicates the search option using dir_ordinal. */ - uint8_t opt_ordinal; - /* This value indicates the search option using dir_ordinal. */ - #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_MASK UINT32_C(0x3) - #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_SFT 0 - /* Equal to specified ordinal value. */ - #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_EQ UINT32_C(0x0) - /* Greater than or equal to specified ordinal value */ - #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_GE UINT32_C(0x1) - /* Greater than specified ordinal value */ - #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_GT UINT32_C(0x2) - #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_LAST \ - HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_GT - uint8_t unused_0[3]; -} __attribute__((packed)); + */ + uint64_t resp_addr; +} __rte_packed; -/* hwrm_nvm_find_dir_entry_output (size:256b/32B) */ -struct hwrm_nvm_find_dir_entry_output { +/* hwrm_nvm_flush_output (size:128b/16B) */ +struct hwrm_nvm_flush_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -26342,19 +41445,6 @@ struct hwrm_nvm_find_dir_entry_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* Allocated NVRAM for this directory entry, in bytes. */ - uint32_t dir_item_length; - /* Size of the stored data for this directory entry, in bytes. */ - uint32_t dir_data_length; - /* - * Firmware version. - * Only valid if the directory entry is for embedded firmware stored in APE_BIN Format. - */ - uint32_t fw_ver; - /* Directory ordinal. */ - uint16_t dir_ordinal; - /* Directory Entry Index */ - uint16_t dir_idx; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output @@ -26364,15 +41454,31 @@ struct hwrm_nvm_find_dir_entry_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/**************************** - * hwrm_nvm_erase_dir_entry * - ****************************/ +/* hwrm_nvm_flush_cmd_err (size:64b/8B) */ +struct hwrm_nvm_flush_cmd_err { + /* + * command specific error codes that goes to + * the cmd_err field in Common HWRM Error Response. + */ + uint8_t code; + /* Unknown error */ + #define HWRM_NVM_FLUSH_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0) + /* flush could not be performed */ + #define HWRM_NVM_FLUSH_CMD_ERR_CODE_FAIL UINT32_C(0x1) + #define HWRM_NVM_FLUSH_CMD_ERR_CODE_LAST \ + HWRM_NVM_FLUSH_CMD_ERR_CODE_FAIL + uint8_t unused_0[7]; +} __rte_packed; +/************************* + * hwrm_nvm_get_variable * + *************************/ -/* hwrm_nvm_erase_dir_entry_input (size:192b/24B) */ -struct hwrm_nvm_erase_dir_entry_input { + +/* hwrm_nvm_get_variable_input (size:320b/40B) */ +struct hwrm_nvm_get_variable_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -26389,7 +41495,8 @@ struct hwrm_nvm_erase_dir_entry_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -26400,13 +41507,50 @@ struct hwrm_nvm_erase_dir_entry_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* Directory Entry Index */ - uint16_t dir_idx; - uint8_t unused_0[6]; -} __attribute__((packed)); + /* + * This is the host address where + * nvm variable will be stored + */ + uint64_t dest_data_addr; + /* size of data in bits */ + uint16_t data_len; + /* nvm cfg option number */ + uint16_t option_num; + /* reserved. */ + #define HWRM_NVM_GET_VARIABLE_INPUT_OPTION_NUM_RSVD_0 UINT32_C(0x0) + /* reserved. */ + #define HWRM_NVM_GET_VARIABLE_INPUT_OPTION_NUM_RSVD_FFFF \ + UINT32_C(0xffff) + #define HWRM_NVM_GET_VARIABLE_INPUT_OPTION_NUM_LAST \ + HWRM_NVM_GET_VARIABLE_INPUT_OPTION_NUM_RSVD_FFFF + /* + * Number of dimensions for this nvm configuration variable. + * This value indicates how many of the indexN values to use. + * A value of 0 means that none of the indexN values are valid. + * A value of 1 requires at index0 is valued, a value of 2 + * requires that index0 and index1 are valid, and so forth + */ + uint16_t dimensions; + /* index for the 1st dimensions */ + uint16_t index_0; + /* index for the 2nd dimensions */ + uint16_t index_1; + /* index for the 3rd dimensions */ + uint16_t index_2; + /* index for the 4th dimensions */ + uint16_t index_3; + uint8_t flags; + /* + * When this bit is set to 1, the factory default value will be returned, + * 0 returns the operational value. + */ + #define HWRM_NVM_GET_VARIABLE_INPUT_FLAGS_FACTORY_DFLT \ + UINT32_C(0x1) + uint8_t unused_0; +} __rte_packed; -/* hwrm_nvm_erase_dir_entry_output (size:128b/16B) */ -struct hwrm_nvm_erase_dir_entry_output { +/* hwrm_nvm_get_variable_output (size:128b/16B) */ +struct hwrm_nvm_get_variable_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -26415,7 +41559,25 @@ struct hwrm_nvm_erase_dir_entry_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - uint8_t unused_0[7]; + /* size of data of the actual variable retrieved in bits */ + uint16_t data_len; + /* + * option_num is the option number for the data retrieved. It is possible in the + * future that the option number returned would be different than requested. This + * condition could occur if an option is deprecated and a new option id is defined + * with similar characteristics, but has a slightly different definition. This + * also makes it convenient for the caller to identify the variable result with + * the option id from the response. + */ + uint16_t option_num; + /* reserved. */ + #define HWRM_NVM_GET_VARIABLE_OUTPUT_OPTION_NUM_RSVD_0 UINT32_C(0x0) + /* reserved. */ + #define HWRM_NVM_GET_VARIABLE_OUTPUT_OPTION_NUM_RSVD_FFFF \ + UINT32_C(0xffff) + #define HWRM_NVM_GET_VARIABLE_OUTPUT_OPTION_NUM_LAST \ + HWRM_NVM_GET_VARIABLE_OUTPUT_OPTION_NUM_RSVD_FFFF + uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -26424,15 +41586,35 @@ struct hwrm_nvm_erase_dir_entry_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; + +/* hwrm_nvm_get_variable_cmd_err (size:64b/8B) */ +struct hwrm_nvm_get_variable_cmd_err { + /* + * command specific error codes that goes to + * the cmd_err field in Common HWRM Error Response. + */ + uint8_t code; + /* Unknown error */ + #define HWRM_NVM_GET_VARIABLE_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0) + /* variable does not exist */ + #define HWRM_NVM_GET_VARIABLE_CMD_ERR_CODE_VAR_NOT_EXIST UINT32_C(0x1) + /* configuration is corrupted and the variable cannot be saved */ + #define HWRM_NVM_GET_VARIABLE_CMD_ERR_CODE_CORRUPT_VAR UINT32_C(0x2) + /* length specified is too small */ + #define HWRM_NVM_GET_VARIABLE_CMD_ERR_CODE_LEN_TOO_SHORT UINT32_C(0x3) + #define HWRM_NVM_GET_VARIABLE_CMD_ERR_CODE_LAST \ + HWRM_NVM_GET_VARIABLE_CMD_ERR_CODE_LEN_TOO_SHORT + uint8_t unused_0[7]; +} __rte_packed; /************************* - * hwrm_nvm_get_dev_info * + * hwrm_nvm_set_variable * *************************/ -/* hwrm_nvm_get_dev_info_input (size:128b/16B) */ -struct hwrm_nvm_get_dev_info_input { +/* hwrm_nvm_set_variable_input (size:320b/40B) */ +struct hwrm_nvm_set_variable_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -26449,7 +41631,8 @@ struct hwrm_nvm_get_dev_info_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -26460,10 +41643,71 @@ struct hwrm_nvm_get_dev_info_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; -} __attribute__((packed)); + /* + * This is the host address where + * nvm variable will be copied from + */ + uint64_t src_data_addr; + /* size of data in bits */ + uint16_t data_len; + /* nvm cfg option number */ + uint16_t option_num; + /* reserved. */ + #define HWRM_NVM_SET_VARIABLE_INPUT_OPTION_NUM_RSVD_0 UINT32_C(0x0) + /* reserved. */ + #define HWRM_NVM_SET_VARIABLE_INPUT_OPTION_NUM_RSVD_FFFF \ + UINT32_C(0xffff) + #define HWRM_NVM_SET_VARIABLE_INPUT_OPTION_NUM_LAST \ + HWRM_NVM_SET_VARIABLE_INPUT_OPTION_NUM_RSVD_FFFF + /* + * Number of dimensions for this nvm configuration variable. + * This value indicates how many of the indexN values to use. + * A value of 0 means that none of the indexN values are valid. + * A value of 1 requires at index0 is valued, a value of 2 + * requires that index0 and index1 are valid, and so forth + */ + uint16_t dimensions; + /* index for the 1st dimensions */ + uint16_t index_0; + /* index for the 2nd dimensions */ + uint16_t index_1; + /* index for the 3rd dimensions */ + uint16_t index_2; + /* index for the 4th dimensions */ + uint16_t index_3; + uint8_t flags; + /* When this bit is 1, flush internal cache after this write operation (see hwrm_nvm_flush command.) */ + #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_FORCE_FLUSH \ + UINT32_C(0x1) + /* encryption method */ + #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_MASK \ + UINT32_C(0xe) + #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_SFT 1 + /* No encryption. */ + #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_NONE \ + (UINT32_C(0x0) << 1) + /* one-way encryption. */ + #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_HMAC_SHA1 \ + (UINT32_C(0x1) << 1) + /* symmetric AES256 encryption. */ + #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_AES256 \ + (UINT32_C(0x2) << 1) + /* SHA1 digest appended to plaintext contents, for authentication */ + #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_HMAC_SHA1_AUTH \ + (UINT32_C(0x3) << 1) + #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_LAST \ + HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_HMAC_SHA1_AUTH + #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_FLAGS_UNUSED_0_MASK \ + UINT32_C(0x70) + #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_FLAGS_UNUSED_0_SFT 4 + /* When this bit is 1, update the factory default region */ + #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_FACTORY_DEFAULT \ + UINT32_C(0x80) + uint8_t unused_0; +} __rte_packed; -/* hwrm_nvm_get_dev_info_output (size:256b/32B) */ -struct hwrm_nvm_get_dev_info_output { +/* hwrm_nvm_set_variable_output (size:128b/16B) */ +struct hwrm_nvm_set_variable_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -26472,18 +41716,7 @@ struct hwrm_nvm_get_dev_info_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* Manufacturer ID. */ - uint16_t manufacturer_id; - /* Device ID. */ - uint16_t device_id; - /* Sector size of the NVRAM device. */ - uint32_t sector_size; - /* Total size, in bytes of the NVRAM device. */ - uint32_t nvram_size; - uint32_t reserved_size; - /* Available size that can be used, in bytes. Available size is the NVRAM size take away the used size and reserved size. */ - uint32_t available_size; - uint8_t unused_0[3]; + uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -26492,15 +41725,33 @@ struct hwrm_nvm_get_dev_info_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/************************** - * hwrm_nvm_mod_dir_entry * - **************************/ +/* hwrm_nvm_set_variable_cmd_err (size:64b/8B) */ +struct hwrm_nvm_set_variable_cmd_err { + /* + * command specific error codes that goes to + * the cmd_err field in Common HWRM Error Response. + */ + uint8_t code; + /* Unknown error */ + #define HWRM_NVM_SET_VARIABLE_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0) + /* variable does not exist */ + #define HWRM_NVM_SET_VARIABLE_CMD_ERR_CODE_VAR_NOT_EXIST UINT32_C(0x1) + /* configuration is corrupted and the variable cannot be saved */ + #define HWRM_NVM_SET_VARIABLE_CMD_ERR_CODE_CORRUPT_VAR UINT32_C(0x2) + #define HWRM_NVM_SET_VARIABLE_CMD_ERR_CODE_LAST \ + HWRM_NVM_SET_VARIABLE_CMD_ERR_CODE_CORRUPT_VAR + uint8_t unused_0[7]; +} __rte_packed; + +/**************************** + * hwrm_nvm_validate_option * + ****************************/ -/* hwrm_nvm_mod_dir_entry_input (size:256b/32B) */ -struct hwrm_nvm_mod_dir_entry_input { +/* hwrm_nvm_validate_option_input (size:320b/40B) */ +struct hwrm_nvm_validate_option_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -26517,7 +41768,8 @@ struct hwrm_nvm_mod_dir_entry_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -26528,32 +41780,44 @@ struct hwrm_nvm_mod_dir_entry_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - uint32_t enables; /* - * This bit must be '1' for the checksum field to be - * configured. - */ - #define HWRM_NVM_MOD_DIR_ENTRY_INPUT_ENABLES_CHECKSUM UINT32_C(0x1) - /* Directory Entry Index */ - uint16_t dir_idx; - /* - * Directory ordinal. - * The (0-based) instance of this Directory Type. + * This is the host address where + * nvm variable will be copied from */ - uint16_t dir_ordinal; - /* The Directory Entry Extension flags (see BNX_DIR_EXT_* for extension flag definitions). */ - uint16_t dir_ext; - /* Directory Entry Attribute flags (see BNX_DIR_ATTR_* for attribute flag definitions). */ - uint16_t dir_attr; + uint64_t src_data_addr; + /* size of data in bits */ + uint16_t data_len; + /* nvm cfg option number */ + uint16_t option_num; + /* reserved. */ + #define HWRM_NVM_VALIDATE_OPTION_INPUT_OPTION_NUM_RSVD_0 \ + UINT32_C(0x0) + /* reserved. */ + #define HWRM_NVM_VALIDATE_OPTION_INPUT_OPTION_NUM_RSVD_FFFF \ + UINT32_C(0xffff) + #define HWRM_NVM_VALIDATE_OPTION_INPUT_OPTION_NUM_LAST \ + HWRM_NVM_VALIDATE_OPTION_INPUT_OPTION_NUM_RSVD_FFFF /* - * If valid, then this field updates the checksum - * value of the content in the directory entry. + * Number of dimensions for this nvm configuration variable. + * This value indicates how many of the indexN values to use. + * A value of 0 means that none of the indexN values are valid. + * A value of 1 requires at index0 is valued, a value of 2 + * requires that index0 and index1 are valid, and so forth */ - uint32_t checksum; -} __attribute__((packed)); + uint16_t dimensions; + /* index for the 1st dimensions */ + uint16_t index_0; + /* index for the 2nd dimensions */ + uint16_t index_1; + /* index for the 3rd dimensions */ + uint16_t index_2; + /* index for the 4th dimensions */ + uint16_t index_3; + uint8_t unused_0[2]; +} __rte_packed; -/* hwrm_nvm_mod_dir_entry_output (size:128b/16B) */ -struct hwrm_nvm_mod_dir_entry_output { +/* hwrm_nvm_validate_option_output (size:128b/16B) */ +struct hwrm_nvm_validate_option_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -26562,7 +41826,14 @@ struct hwrm_nvm_mod_dir_entry_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - uint8_t unused_0[7]; + uint8_t result; + /* indicates that the value provided for the option is not matching with the saved data. */ + #define HWRM_NVM_VALIDATE_OPTION_OUTPUT_RESULT_NOT_MATCH UINT32_C(0x0) + /* indicates that the value provided for the option is matching the saved data. */ + #define HWRM_NVM_VALIDATE_OPTION_OUTPUT_RESULT_MATCH UINT32_C(0x1) + #define HWRM_NVM_VALIDATE_OPTION_OUTPUT_RESULT_LAST \ + HWRM_NVM_VALIDATE_OPTION_OUTPUT_RESULT_MATCH + uint8_t unused_0[6]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -26571,15 +41842,29 @@ struct hwrm_nvm_mod_dir_entry_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/************************** - * hwrm_nvm_verify_update * - **************************/ +/* hwrm_nvm_validate_option_cmd_err (size:64b/8B) */ +struct hwrm_nvm_validate_option_cmd_err { + /* + * command specific error codes that goes to + * the cmd_err field in Common HWRM Error Response. + */ + uint8_t code; + /* Unknown error */ + #define HWRM_NVM_VALIDATE_OPTION_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0) + #define HWRM_NVM_VALIDATE_OPTION_CMD_ERR_CODE_LAST \ + HWRM_NVM_VALIDATE_OPTION_CMD_ERR_CODE_UNKNOWN + uint8_t unused_0[7]; +} __rte_packed; + +/**************** + * hwrm_oem_cmd * + ****************/ -/* hwrm_nvm_verify_update_input (size:192b/24B) */ -struct hwrm_nvm_verify_update_input { +/* hwrm_oem_cmd_input (size:1024b/128B) */ +struct hwrm_oem_cmd_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -26596,7 +41881,8 @@ struct hwrm_nvm_verify_update_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -26607,26 +41893,14 @@ struct hwrm_nvm_verify_update_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* Directory Entry Type, to be verified. */ - uint16_t dir_type; - /* - * Directory ordinal. - * The instance of the Directory Type to be verified. - */ - uint16_t dir_ordinal; - /* - * The Directory Entry Extension flags. - * The "UPDATE" extension flag must be set in this value. - * A corresponding directory entry with the same type and ordinal values but *without* - * the "UPDATE" extension flag must also exist. The other flags of the extension must - * be identical between the active and update entries. - */ - uint16_t dir_ext; - uint8_t unused_0[2]; -} __attribute__((packed)); + uint32_t IANA; + uint32_t unused_0; + /* This field contains the vendor specific command data. */ + uint32_t oem_data[26]; +} __rte_packed; -/* hwrm_nvm_verify_update_output (size:128b/16B) */ -struct hwrm_nvm_verify_update_output { +/* hwrm_oem_cmd_output (size:768b/96B) */ +struct hwrm_oem_cmd_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -26635,7 +41909,11 @@ struct hwrm_nvm_verify_update_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - uint8_t unused_0[7]; + uint32_t IANA; + uint32_t unused_0; + /* This field contains the vendor specific response data. */ + uint32_t oem_data[18]; + uint8_t unused_1[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -26644,143 +41922,135 @@ struct hwrm_nvm_verify_update_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); +} __rte_packed; -/*************************** - * hwrm_nvm_install_update * - ***************************/ +/***************** + * hwrm_fw_reset * + ******************/ -/* hwrm_nvm_install_update_input (size:192b/24B) */ -struct hwrm_nvm_install_update_input { +/* hwrm_fw_reset_input (size:192b/24B) */ +struct hwrm_fw_reset_input { /* The HWRM command request type. */ - uint16_t req_type; + uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ - uint16_t cmpl_ring; + uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ - uint16_t seq_id; + uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ - uint16_t target_id; + uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ - uint64_t resp_addr; - /* - * Installation type. If the value 3 through 0xffff is used, - * only packaged items with that type value will be installed and - * conditional installation directives for those packaged items - * will be over-ridden (i.e. 'create' or 'replace' will be treated - * as 'install'). - */ - uint32_t install_type; + uint64_t resp_addr; + /* Type of embedded processor. */ + uint8_t embedded_proc_type; + /* Boot Processor */ + #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_BOOT \ + UINT32_C(0x0) + /* Management Processor */ + #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_MGMT \ + UINT32_C(0x1) + /* Network control processor */ + #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_NETCTRL \ + UINT32_C(0x2) + /* RoCE control processor */ + #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_ROCE \ + UINT32_C(0x3) /* - * Perform a normal package installation. Conditional installation - * directives (e.g. 'create' and 'replace') of packaged items - * will be followed. + * Host (in multi-host environment): This is only valid if requester is IPC. + * Reinit host hardware resources and PCIe. */ - #define HWRM_NVM_INSTALL_UPDATE_INPUT_INSTALL_TYPE_NORMAL UINT32_C(0x0) + #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_HOST \ + UINT32_C(0x4) + /* AP processor complex (in multi-host environment). Use host_idx to control which core is reset */ + #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_AP \ + UINT32_C(0x5) + /* Reset all blocks of the chip (including all processors) */ + #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_CHIP \ + UINT32_C(0x6) /* - * Install all packaged items regardless of installation directive - * (i.e. treat all packaged items as though they have an installation - * directive of 'install'). + * Host (in multi-host environment): This is only valid if requester is IPC. + * Reinit host hardware resources. */ - #define HWRM_NVM_INSTALL_UPDATE_INPUT_INSTALL_TYPE_ALL \ - UINT32_C(0xffffffff) - #define HWRM_NVM_INSTALL_UPDATE_INPUT_INSTALL_TYPE_LAST \ - HWRM_NVM_INSTALL_UPDATE_INPUT_INSTALL_TYPE_ALL - uint16_t flags; - /* If set to 1, then securely erase all unused locations in persistent storage. */ - #define HWRM_NVM_INSTALL_UPDATE_INPUT_FLAGS_ERASE_UNUSED_SPACE \ + #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_HOST_RESOURCE_REINIT \ + UINT32_C(0x7) + #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_LAST \ + HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_HOST_RESOURCE_REINIT + /* Type of self reset. */ + uint8_t selfrst_status; + /* No Self Reset */ + #define HWRM_FW_RESET_INPUT_SELFRST_STATUS_SELFRSTNONE \ + UINT32_C(0x0) + /* Self Reset as soon as possible to do so safely */ + #define HWRM_FW_RESET_INPUT_SELFRST_STATUS_SELFRSTASAP \ UINT32_C(0x1) + /* Self Reset on PCIe Reset */ + #define HWRM_FW_RESET_INPUT_SELFRST_STATUS_SELFRSTPCIERST \ + UINT32_C(0x2) + /* Self Reset immediately after notification to all clients. */ + #define HWRM_FW_RESET_INPUT_SELFRST_STATUS_SELFRSTIMMEDIATE \ + UINT32_C(0x3) + #define HWRM_FW_RESET_INPUT_SELFRST_STATUS_LAST \ + HWRM_FW_RESET_INPUT_SELFRST_STATUS_SELFRSTIMMEDIATE /* - * If set to 1, then unspecifed images, images not in the package file, will be safely deleted. - * When combined with erase_unused_space then unspecified images will be securely erased. + * Indicate which host is being reset. 0 means first host. + * Only valid when embedded_proc_type is host in multihost + * environment */ - #define HWRM_NVM_INSTALL_UPDATE_INPUT_FLAGS_REMOVE_UNUSED_PKG \ - UINT32_C(0x2) + uint8_t host_idx; + uint8_t flags; /* - * If set to 1, FW will defragment the NVM if defragmentation is required for the update. - * Allow additional time for this command to complete if this bit is set to 1. + * When this bit is '1', then the core firmware initiates + * the reset only after graceful shut down of all registered instances. + * If not, the device will continue with the existing firmware. */ - #define HWRM_NVM_INSTALL_UPDATE_INPUT_FLAGS_ALLOWED_TO_DEFRAG \ - UINT32_C(0x4) - uint8_t unused_0[2]; -} __attribute__((packed)); + #define HWRM_FW_RESET_INPUT_FLAGS_RESET_GRACEFUL UINT32_C(0x1) + uint8_t unused_0[4]; +} __rte_packed; -/* hwrm_nvm_install_update_output (size:192b/24B) */ -struct hwrm_nvm_install_update_output { +/* hwrm_fw_reset_output (size:128b/16B) */ +struct hwrm_fw_reset_output { /* The specific error status for the command. */ - uint16_t error_code; + uint16_t error_code; /* The HWRM command request type. */ - uint16_t req_type; + uint16_t req_type; /* The sequence ID from the original command. */ - uint16_t seq_id; + uint16_t seq_id; /* The length of the response data in number of bytes. */ - uint16_t resp_len; - /* - * Bit-mask of successfully installed items. - * Bit-0 corresponding to the first packaged item, Bit-1 for the second item, etc. - * A value of 0 indicates that no items were successfully installed. - */ - uint64_t installed_items; - /* result is 8 b */ - uint8_t result; - /* There was no problem with the package installation. */ - #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESULT_SUCCESS UINT32_C(0x0) - #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESULT_LAST \ - HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESULT_SUCCESS - /* problem_item is 8 b */ - uint8_t problem_item; - /* There was no problem with any packaged items. */ - #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_PROBLEM_ITEM_NONE \ - UINT32_C(0x0) - /* There was a problem with the NVM package itself. */ - #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_PROBLEM_ITEM_PACKAGE \ - UINT32_C(0xff) - #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_PROBLEM_ITEM_LAST \ - HWRM_NVM_INSTALL_UPDATE_OUTPUT_PROBLEM_ITEM_PACKAGE - /* reset_required is 8 b */ - uint8_t reset_required; - /* - * No reset is required for installed/updated firmware or - * microcode to take effect. - */ - #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESET_REQUIRED_NONE \ + uint16_t resp_len; + /* Type of self reset. */ + uint8_t selfrst_status; + /* No Self Reset */ + #define HWRM_FW_RESET_OUTPUT_SELFRST_STATUS_SELFRSTNONE \ UINT32_C(0x0) - /* - * A PCIe reset (e.g. system reboot) is - * required for newly installed/updated firmware or - * microcode to take effect. - */ - #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESET_REQUIRED_PCI \ + /* Self Reset as soon as possible to do so safely */ + #define HWRM_FW_RESET_OUTPUT_SELFRST_STATUS_SELFRSTASAP \ UINT32_C(0x1) - /* - * A controller power reset (e.g. system power-cycle) is - * required for newly installed/updated firmware or - * microcode to take effect. Some newly installed/updated - * firmware or microcode may still take effect upon the - * next PCIe reset. - */ - #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESET_REQUIRED_POWER \ + /* Self Reset on PCIe Reset */ + #define HWRM_FW_RESET_OUTPUT_SELFRST_STATUS_SELFRSTPCIERST \ UINT32_C(0x2) - #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESET_REQUIRED_LAST \ - HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESET_REQUIRED_POWER - uint8_t unused_0[4]; + /* Self Reset immediately after notification to all clients. */ + #define HWRM_FW_RESET_OUTPUT_SELFRST_STATUS_SELFRSTIMMEDIATE \ + UINT32_C(0x3) + #define HWRM_FW_RESET_OUTPUT_SELFRST_STATUS_LAST \ + HWRM_FW_RESET_OUTPUT_SELFRST_STATUS_SELFRSTIMMEDIATE + uint8_t unused_0[6]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -26788,34 +42058,16 @@ struct hwrm_nvm_install_update_output { * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ - uint8_t valid; -} __attribute__((packed)); - -/* hwrm_nvm_install_update_cmd_err (size:64b/8B) */ -struct hwrm_nvm_install_update_cmd_err { - /* - * command specific error codes that goes to - * the cmd_err field in Common HWRM Error Response. - */ - uint8_t code; - /* Unknown error */ - #define HWRM_NVM_INSTALL_UPDATE_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0) - /* Unable to complete operation due to fragmentation */ - #define HWRM_NVM_INSTALL_UPDATE_CMD_ERR_CODE_FRAG_ERR UINT32_C(0x1) - /* nvm is completely full. */ - #define HWRM_NVM_INSTALL_UPDATE_CMD_ERR_CODE_NO_SPACE UINT32_C(0x2) - #define HWRM_NVM_INSTALL_UPDATE_CMD_ERR_CODE_LAST \ - HWRM_NVM_INSTALL_UPDATE_CMD_ERR_CODE_NO_SPACE - uint8_t unused_0[7]; -} __attribute__((packed)); + uint8_t valid; +} __rte_packed; -/****************** - * hwrm_nvm_flush * - ******************/ +/********************** + * hwrm_port_ts_query * + ***********************/ -/* hwrm_nvm_flush_input (size:128b/16B) */ -struct hwrm_nvm_flush_input { +/* hwrm_port_ts_query_input (size:192b/24B) */ +struct hwrm_port_ts_query_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -26832,7 +42084,8 @@ struct hwrm_nvm_flush_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -26843,10 +42096,31 @@ struct hwrm_nvm_flush_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; -} __attribute__((packed)); + uint32_t flags; + /* + * Enumeration denoting the RX, TX type of the resource. + * This enumeration is used for resources that are similar for both + * TX and RX paths of the chip. + */ + #define HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH 0x1UL + /* tx path */ + #define HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH_TX 0x0UL + /* rx path */ + #define HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH_RX 0x1UL + #define HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH_LAST \ + HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH_RX + /* + * If set, the response includes the current value of the free + * running timer. + */ + #define HWRM_PORT_TS_QUERY_INPUT_FLAGS_CURRENT_TIME 0x2UL + /* Port ID of port that is being queried. */ + uint16_t port_id; + uint8_t unused_0[2]; +} __rte_packed; -/* hwrm_nvm_flush_output (size:128b/16B) */ -struct hwrm_nvm_flush_output { +/* hwrm_port_ts_query_output (size:192b/24B) */ +struct hwrm_port_ts_query_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -26855,40 +42129,80 @@ struct hwrm_nvm_flush_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - uint8_t unused_0[7]; /* - * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' - * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. + * Timestamp value of PTP message captured, or current value of + * free running timer. */ - uint8_t valid; -} __attribute__((packed)); - -/* hwrm_nvm_flush_cmd_err (size:64b/8B) */ -struct hwrm_nvm_flush_cmd_err { + uint32_t ptp_msg_ts[2]; + /* Sequence ID of the PTP message captured. */ + uint16_t ptp_msg_seqid; + uint8_t unused_0[5]; /* - * command specific error codes that goes to - * the cmd_err field in Common HWRM Error Response. - */ - uint8_t code; - /* Unknown error */ - #define HWRM_NVM_FLUSH_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0) - /* flush could not be performed */ - #define HWRM_NVM_FLUSH_CMD_ERR_CODE_FAIL UINT32_C(0x1) - #define HWRM_NVM_FLUSH_CMD_ERR_CODE_LAST \ - HWRM_NVM_FLUSH_CMD_ERR_CODE_FAIL - uint8_t unused_0[7]; -} __attribute__((packed)); + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __rte_packed; -/************************* - * hwrm_nvm_get_variable * - *************************/ +/* + * This structure is fixed at the beginning of the ChiMP SRAM (GRC + * offset: 0x31001F0). Host software is expected to read from this + * location for a defined signature. If it exists, the software can + * assume the presence of this structure and the validity of the + * FW_STATUS location in the next field. + */ +/* hcomm_status (size:64b/8B) */ +struct hcomm_status { + uint32_t sig_ver; + /* + * This field defines the version of the structure. The latest + * version value is 1. + */ + #define HCOMM_STATUS_VER_MASK UINT32_C(0xff) + #define HCOMM_STATUS_VER_SFT 0 + #define HCOMM_STATUS_VER_LATEST UINT32_C(0x1) + #define HCOMM_STATUS_VER_LAST HCOMM_STATUS_VER_LATEST + /* + * This field is to store the signature value to indicate the + * presence of the structure. + */ + #define HCOMM_STATUS_SIGNATURE_MASK UINT32_C(0xffffff00) + #define HCOMM_STATUS_SIGNATURE_SFT 8 + #define HCOMM_STATUS_SIGNATURE_VAL (UINT32_C(0x484353) << 8) + #define HCOMM_STATUS_SIGNATURE_LAST HCOMM_STATUS_SIGNATURE_VAL + uint32_t fw_status_loc; + #define HCOMM_STATUS_TRUE_ADDR_SPACE_MASK UINT32_C(0x3) + #define HCOMM_STATUS_TRUE_ADDR_SPACE_SFT 0 + /* PCIE configuration space */ + #define HCOMM_STATUS_FW_STATUS_LOC_ADDR_SPACE_PCIE_CFG UINT32_C(0x0) + /* GRC space */ + #define HCOMM_STATUS_FW_STATUS_LOC_ADDR_SPACE_GRC UINT32_C(0x1) + /* BAR0 space */ + #define HCOMM_STATUS_FW_STATUS_LOC_ADDR_SPACE_BAR0 UINT32_C(0x2) + /* BAR1 space */ + #define HCOMM_STATUS_FW_STATUS_LOC_ADDR_SPACE_BAR1 UINT32_C(0x3) + #define HCOMM_STATUS_FW_STATUS_LOC_ADDR_SPACE_LAST \ + HCOMM_STATUS_FW_STATUS_LOC_ADDR_SPACE_BAR1 + /* + * This offset where the fw_status register is located. The value + * is generally 4-byte aligned. + */ + #define HCOMM_STATUS_TRUE_OFFSET_MASK UINT32_C(0xfffffffc) + #define HCOMM_STATUS_TRUE_OFFSET_SFT 2 +} __rte_packed; +/* This is the GRC offset where the hcomm_status struct resides. */ +#define HCOMM_STATUS_STRUCT_LOC 0x31001F0UL +/************************** + * hwrm_cfa_counter_qcaps * + **************************/ -/* hwrm_nvm_get_variable_input (size:320b/40B) */ -struct hwrm_nvm_get_variable_input { + +/* hwrm_cfa_counter_qcaps_input (size:128b/16B) */ +struct hwrm_cfa_counter_qcaps_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -26905,7 +42219,8 @@ struct hwrm_nvm_get_variable_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -26916,50 +42231,10 @@ struct hwrm_nvm_get_variable_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* - * This is the host address where - * nvm variable will be stored - */ - uint64_t dest_data_addr; - /* size of data in bits */ - uint16_t data_len; - /* nvm cfg option number */ - uint16_t option_num; - /* reserved. */ - #define HWRM_NVM_GET_VARIABLE_INPUT_OPTION_NUM_RSVD_0 UINT32_C(0x0) - /* reserved. */ - #define HWRM_NVM_GET_VARIABLE_INPUT_OPTION_NUM_RSVD_FFFF \ - UINT32_C(0xffff) - #define HWRM_NVM_GET_VARIABLE_INPUT_OPTION_NUM_LAST \ - HWRM_NVM_GET_VARIABLE_INPUT_OPTION_NUM_RSVD_FFFF - /* - * Number of dimensions for this nvm configuration variable. - * This value indicates how many of the indexN values to use. - * A value of 0 means that none of the indexN values are valid. - * A value of 1 requires at index0 is valued, a value of 2 - * requires that index0 and index1 are valid, and so forth - */ - uint16_t dimensions; - /* index for the 1st dimensions */ - uint16_t index_0; - /* index for the 2nd dimensions */ - uint16_t index_1; - /* index for the 3rd dimensions */ - uint16_t index_2; - /* index for the 4th dimensions */ - uint16_t index_3; - uint8_t flags; - /* - * When this bit is set to 1, the factory default value will be returned, - * 0 returns the operational value. - */ - #define HWRM_NVM_GET_VARIABLE_INPUT_FLAGS_FACTORY_DFLT \ - UINT32_C(0x1) - uint8_t unused_0; -} __attribute__((packed)); +} __rte_packed; -/* hwrm_nvm_get_variable_output (size:128b/16B) */ -struct hwrm_nvm_get_variable_output { +/* hwrm_cfa_counter_qcaps_output (size:576b/72B) */ +struct hwrm_cfa_counter_qcaps_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -26968,25 +42243,46 @@ struct hwrm_nvm_get_variable_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* size of data of the actual variable retrieved in bits */ - uint16_t data_len; - /* - * option_num is the option number for the data retrieved. It is possible in the - * future that the option number returned would be different than requested. This - * condition could occur if an option is deprecated and a new option id is defined - * with similar characteristics, but has a slightly different definition. This - * also makes it convenient for the caller to identify the variable result with - * the option id from the response. - */ - uint16_t option_num; - /* reserved. */ - #define HWRM_NVM_GET_VARIABLE_OUTPUT_OPTION_NUM_RSVD_0 UINT32_C(0x0) - /* reserved. */ - #define HWRM_NVM_GET_VARIABLE_OUTPUT_OPTION_NUM_RSVD_FFFF \ - UINT32_C(0xffff) - #define HWRM_NVM_GET_VARIABLE_OUTPUT_OPTION_NUM_LAST \ - HWRM_NVM_GET_VARIABLE_OUTPUT_OPTION_NUM_RSVD_FFFF - uint8_t unused_0[3]; + uint32_t flags; + /* Enumeration denoting the supported CFA counter format. */ + #define HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT \ + UINT32_C(0x1) + /* CFA counter types are not supported. */ + #define HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT_NONE \ + UINT32_C(0x0) + /* 64-bit packet counters followed by 64-bit byte counters format. */ + #define HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT_64_BIT \ + UINT32_C(0x1) + #define HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT_LAST \ + HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT_64_BIT + uint32_t unused_0; + /* Minimum guaranteed number of flow counters supported for this function, in RX direction. */ + uint32_t min_rx_fc; + /* Maximum non-guaranteed number of flow counters supported for this function, in RX direction. */ + uint32_t max_rx_fc; + /* Minimum guaranteed number of flow counters supported for this function, in TX direction. */ + uint32_t min_tx_fc; + /* Maximum non-guaranteed number of flow counters supported for this function, in TX direction. */ + uint32_t max_tx_fc; + /* Minimum guaranteed number of extension flow counters supported for this function, in RX direction. */ + uint32_t min_rx_efc; + /* Maximum non-guaranteed number of extension flow counters supported for this function, in RX direction. */ + uint32_t max_rx_efc; + /* Minimum guaranteed number of extension flow counters supported for this function, in TX direction. */ + uint32_t min_tx_efc; + /* Maximum non-guaranteed number of extension flow counters supported for this function, in TX direction. */ + uint32_t max_tx_efc; + /* Minimum guaranteed number of meter drop counters supported for this function, in RX direction. */ + uint32_t min_rx_mdc; + /* Maximum non-guaranteed number of meter drop counters supported for this function, in RX direction. */ + uint32_t max_rx_mdc; + /* Minimum guaranteed number of meter drop counters supported for this function, in TX direction. */ + uint32_t min_tx_mdc; + /* Maximum non-guaranteed number of meter drop counters supported for this function, in TX direction. */ + uint32_t max_tx_mdc; + /* Maximum guaranteed number of flow counters which can be used during flow alloc. */ + uint32_t max_flow_alloc_fc; + uint8_t unused_1[3]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -26995,35 +42291,15 @@ struct hwrm_nvm_get_variable_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); - -/* hwrm_nvm_get_variable_cmd_err (size:64b/8B) */ -struct hwrm_nvm_get_variable_cmd_err { - /* - * command specific error codes that goes to - * the cmd_err field in Common HWRM Error Response. - */ - uint8_t code; - /* Unknown error */ - #define HWRM_NVM_GET_VARIABLE_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0) - /* variable does not exist */ - #define HWRM_NVM_GET_VARIABLE_CMD_ERR_CODE_VAR_NOT_EXIST UINT32_C(0x1) - /* configuration is corrupted and the variable cannot be saved */ - #define HWRM_NVM_GET_VARIABLE_CMD_ERR_CODE_CORRUPT_VAR UINT32_C(0x2) - /* length specified is too small */ - #define HWRM_NVM_GET_VARIABLE_CMD_ERR_CODE_LEN_TOO_SHORT UINT32_C(0x3) - #define HWRM_NVM_GET_VARIABLE_CMD_ERR_CODE_LAST \ - HWRM_NVM_GET_VARIABLE_CMD_ERR_CODE_LEN_TOO_SHORT - uint8_t unused_0[7]; -} __attribute__((packed)); +} __rte_packed; -/************************* - * hwrm_nvm_set_variable * - *************************/ +/************************ + * hwrm_cfa_counter_cfg * + ************************/ -/* hwrm_nvm_set_variable_input (size:320b/40B) */ -struct hwrm_nvm_set_variable_input { +/* hwrm_cfa_counter_cfg_input (size:256b/32B) */ +struct hwrm_cfa_counter_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -27040,7 +42316,8 @@ struct hwrm_nvm_set_variable_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -27051,65 +42328,64 @@ struct hwrm_nvm_set_variable_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* - * This is the host address where - * nvm variable will be copied from - */ - uint64_t src_data_addr; - /* size of data in bits */ - uint16_t data_len; - /* nvm cfg option number */ - uint16_t option_num; - /* reserved. */ - #define HWRM_NVM_SET_VARIABLE_INPUT_OPTION_NUM_RSVD_0 UINT32_C(0x0) - /* reserved. */ - #define HWRM_NVM_SET_VARIABLE_INPUT_OPTION_NUM_RSVD_FFFF \ - UINT32_C(0xffff) - #define HWRM_NVM_SET_VARIABLE_INPUT_OPTION_NUM_LAST \ - HWRM_NVM_SET_VARIABLE_INPUT_OPTION_NUM_RSVD_FFFF - /* - * Number of dimensions for this nvm configuration variable. - * This value indicates how many of the indexN values to use. - * A value of 0 means that none of the indexN values are valid. - * A value of 1 requires at index0 is valued, a value of 2 - * requires that index0 and index1 are valid, and so forth - */ - uint16_t dimensions; - /* index for the 1st dimensions */ - uint16_t index_0; - /* index for the 2nd dimensions */ - uint16_t index_1; - /* index for the 3rd dimensions */ - uint16_t index_2; - /* index for the 4th dimensions */ - uint16_t index_3; - uint8_t flags; - /* When this bit is 1, flush internal cache after this write operation (see hwrm_nvm_flush command.) */ - #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_FORCE_FLUSH \ + uint16_t flags; + /* Enumeration denoting the configuration mode. */ + #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE \ UINT32_C(0x1) - /* encryption method */ - #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_MASK \ - UINT32_C(0xe) - #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_SFT 1 - /* No encryption. */ - #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_NONE \ + /* Disable the configuration mode. */ + #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE_DISABLE \ + UINT32_C(0x0) + /* Enable the configuration mode. */ + #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE_ENABLE \ + UINT32_C(0x1) + #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE_LAST \ + HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE_ENABLE + /* Enumeration denoting the RX, TX type of the resource. */ + #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH \ + UINT32_C(0x2) + /* Tx path. */ + #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH_TX \ (UINT32_C(0x0) << 1) - /* one-way encryption. */ - #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_HMAC_SHA1 \ + /* Rx path. */ + #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH_RX \ (UINT32_C(0x1) << 1) - /* symmetric AES256 encryption. */ - #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_AES256 \ - (UINT32_C(0x2) << 1) - /* SHA1 digest appended to plaintext contents, for authentication */ - #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_HMAC_SHA1_AUTH \ - (UINT32_C(0x3) << 1) - #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_LAST \ - HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_HMAC_SHA1_AUTH - uint8_t unused_0; -} __attribute__((packed)); + #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH_LAST \ + HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH_RX + /* Enumeration denoting the data transfer mode. */ + #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_MASK \ + UINT32_C(0xc) + #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_SFT 2 + /* Push mode. */ + #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_PUSH \ + (UINT32_C(0x0) << 2) + /* Pull mode. */ + #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_PULL \ + (UINT32_C(0x1) << 2) + /* Pull on async update. */ + #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_PULL_ASYNC \ + (UINT32_C(0x2) << 2) + #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_LAST \ + HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_PULL_ASYNC + uint16_t counter_type; + /* Flow counters. */ + #define HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_FC UINT32_C(0x0) + /* Extended flow counters. */ + #define HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_EFC UINT32_C(0x1) + /* Meter drop counters. */ + #define HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_MDC UINT32_C(0x2) + #define HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_LAST \ + HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_MDC + /* Ctx memory handle to be used for the counter. */ + uint16_t ctx_id; + /* Counter update cadence hint (only in Push mode). */ + uint16_t update_tmr_ms; + /* Total number of entries. */ + uint32_t num_entries; + uint32_t unused_0; +} __rte_packed; -/* hwrm_nvm_set_variable_output (size:128b/16B) */ -struct hwrm_nvm_set_variable_output { +/* hwrm_cfa_counter_cfg_output (size:128b/16B) */ +struct hwrm_cfa_counter_cfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -27127,33 +42403,15 @@ struct hwrm_nvm_set_variable_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); - -/* hwrm_nvm_set_variable_cmd_err (size:64b/8B) */ -struct hwrm_nvm_set_variable_cmd_err { - /* - * command specific error codes that goes to - * the cmd_err field in Common HWRM Error Response. - */ - uint8_t code; - /* Unknown error */ - #define HWRM_NVM_SET_VARIABLE_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0) - /* variable does not exist */ - #define HWRM_NVM_SET_VARIABLE_CMD_ERR_CODE_VAR_NOT_EXIST UINT32_C(0x1) - /* configuration is corrupted and the variable cannot be saved */ - #define HWRM_NVM_SET_VARIABLE_CMD_ERR_CODE_CORRUPT_VAR UINT32_C(0x2) - #define HWRM_NVM_SET_VARIABLE_CMD_ERR_CODE_LAST \ - HWRM_NVM_SET_VARIABLE_CMD_ERR_CODE_CORRUPT_VAR - uint8_t unused_0[7]; -} __attribute__((packed)); +} __rte_packed; -/**************************** - * hwrm_nvm_validate_option * - ****************************/ +/*************************** + * hwrm_cfa_counter_qstats * + ***************************/ -/* hwrm_nvm_validate_option_input (size:320b/40B) */ -struct hwrm_nvm_validate_option_input { +/* hwrm_cfa_counter_qstats_input (size:320b/40B) */ +struct hwrm_cfa_counter_qstats_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -27170,7 +42428,8 @@ struct hwrm_nvm_validate_option_input { /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface * * 0xFFFF - HWRM */ uint16_t target_id; @@ -27181,44 +42440,27 @@ struct hwrm_nvm_validate_option_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* - * This is the host address where - * nvm variable will be copied from - */ - uint64_t src_data_addr; - /* size of data in bits */ - uint16_t data_len; - /* nvm cfg option number */ - uint16_t option_num; - /* reserved. */ - #define HWRM_NVM_VALIDATE_OPTION_INPUT_OPTION_NUM_RSVD_0 \ - UINT32_C(0x0) - /* reserved. */ - #define HWRM_NVM_VALIDATE_OPTION_INPUT_OPTION_NUM_RSVD_FFFF \ - UINT32_C(0xffff) - #define HWRM_NVM_VALIDATE_OPTION_INPUT_OPTION_NUM_LAST \ - HWRM_NVM_VALIDATE_OPTION_INPUT_OPTION_NUM_RSVD_FFFF - /* - * Number of dimensions for this nvm configuration variable. - * This value indicates how many of the indexN values to use. - * A value of 0 means that none of the indexN values are valid. - * A value of 1 requires at index0 is valued, a value of 2 - * requires that index0 and index1 are valid, and so forth - */ - uint16_t dimensions; - /* index for the 1st dimensions */ - uint16_t index_0; - /* index for the 2nd dimensions */ - uint16_t index_1; - /* index for the 3rd dimensions */ - uint16_t index_2; - /* index for the 4th dimensions */ - uint16_t index_3; + uint16_t flags; + /* Enumeration denoting the RX, TX type of the resource. */ + #define HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH UINT32_C(0x1) + /* Tx path. */ + #define HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH_TX UINT32_C(0x0) + /* Rx path. */ + #define HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH_RX UINT32_C(0x1) + #define HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH_LAST \ + HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH_RX + uint16_t counter_type; + uint16_t input_flow_ctx_id; + uint16_t num_entries; + uint16_t delta_time_ms; + uint16_t meter_instance_id; + uint16_t mdc_ctx_id; uint8_t unused_0[2]; -} __attribute__((packed)); + uint64_t expected_count; +} __rte_packed; -/* hwrm_nvm_validate_option_output (size:128b/16B) */ -struct hwrm_nvm_validate_option_output { +/* hwrm_cfa_counter_qstats_output (size:128b/16B) */ +struct hwrm_cfa_counter_qstats_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -27227,14 +42469,7 @@ struct hwrm_nvm_validate_option_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - uint8_t result; - /* indicates that the value provided for the option is not matching with the saved data. */ - #define HWRM_NVM_VALIDATE_OPTION_OUTPUT_RESULT_NOT_MATCH UINT32_C(0x0) - /* indicates that the value provided for the option is matching the saved data. */ - #define HWRM_NVM_VALIDATE_OPTION_OUTPUT_RESULT_MATCH UINT32_C(0x1) - #define HWRM_NVM_VALIDATE_OPTION_OUTPUT_RESULT_LAST \ - HWRM_NVM_VALIDATE_OPTION_OUTPUT_RESULT_MATCH - uint8_t unused_0[6]; + uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -27243,20 +42478,6 @@ struct hwrm_nvm_validate_option_output { * the order of writes has to be such that this field is written last. */ uint8_t valid; -} __attribute__((packed)); - -/* hwrm_nvm_validate_option_cmd_err (size:64b/8B) */ -struct hwrm_nvm_validate_option_cmd_err { - /* - * command specific error codes that goes to - * the cmd_err field in Common HWRM Error Response. - */ - uint8_t code; - /* Unknown error */ - #define HWRM_NVM_VALIDATE_OPTION_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0) - #define HWRM_NVM_VALIDATE_OPTION_CMD_ERR_CODE_LAST \ - HWRM_NVM_VALIDATE_OPTION_CMD_ERR_CODE_UNKNOWN - uint8_t unused_0[7]; -} __attribute__((packed)); +} __rte_packed; #endif /* _HSI_STRUCT_DEF_DPDK_H_ */