X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=drivers%2Fnet%2Fbonding%2Frte_eth_bond_8023ad.h;h=1d353c7348708129ec26ea46fffe81a385bf6c76;hb=3d2e0448ebb5c76fda6e988558793c070c3baded;hp=ebd0e934f625b7f91debd8465c0f3de624cfc30d;hpb=3eb6bdd89e49db7ca1b9b5827b8aa194ecfb2e60;p=dpdk.git

diff --git a/drivers/net/bonding/rte_eth_bond_8023ad.h b/drivers/net/bonding/rte_eth_bond_8023ad.h
index ebd0e934f6..1d353c7348 100644
--- a/drivers/net/bonding/rte_eth_bond_8023ad.h
+++ b/drivers/net/bonding/rte_eth_bond_8023ad.h
@@ -64,12 +64,21 @@ extern "C" {
 #define MARKER_TLV_TYPE_INFO                0x01
 #define MARKER_TLV_TYPE_RESP                0x02
 
+typedef void (*rte_eth_bond_8023ad_ext_slowrx_fn)(uint8_t slave_id,
+						  struct rte_mbuf *lacp_pkt);
+
 enum rte_bond_8023ad_selection {
 	UNSELECTED,
 	STANDBY,
 	SELECTED
 };
 
+enum rte_bond_8023ad_agg_selection {
+	AGG_BANDWIDTH,
+	AGG_COUNT,
+	AGG_STABLE
+};
+
 /** Generic slow protocol structure */
 struct slow_protocol {
 	uint8_t subtype;
@@ -157,6 +166,8 @@ struct rte_eth_bond_8023ad_conf {
 	uint32_t tx_period_ms;
 	uint32_t rx_marker_period_ms;
 	uint32_t update_timeout_ms;
+	rte_eth_bond_8023ad_ext_slowrx_fn slowrx_cb;
+	enum rte_bond_8023ad_agg_selection agg_selection;
 };
 
 struct rte_eth_bond_8023ad_slave_info {
@@ -183,6 +194,15 @@ struct rte_eth_bond_8023ad_slave_info {
 int
 rte_eth_bond_8023ad_conf_get(uint8_t port_id,
 		struct rte_eth_bond_8023ad_conf *conf);
+int
+rte_eth_bond_8023ad_conf_get_v20(uint8_t port_id,
+		struct rte_eth_bond_8023ad_conf *conf);
+int
+rte_eth_bond_8023ad_conf_get_v1607(uint8_t port_id,
+		struct rte_eth_bond_8023ad_conf *conf);
+int
+rte_eth_bond_8023ad_conf_get_v1708(uint8_t port_id,
+		struct rte_eth_bond_8023ad_conf *conf);
 
 /**
  * @internal
@@ -198,6 +218,15 @@ rte_eth_bond_8023ad_conf_get(uint8_t port_id,
 int
 rte_eth_bond_8023ad_setup(uint8_t port_id,
 		struct rte_eth_bond_8023ad_conf *conf);
+int
+rte_eth_bond_8023ad_setup_v20(uint8_t port_id,
+		struct rte_eth_bond_8023ad_conf *conf);
+int
+rte_eth_bond_8023ad_setup_v1607(uint8_t port_id,
+		struct rte_eth_bond_8023ad_conf *conf);
+int
+rte_eth_bond_8023ad_setup_v1708(uint8_t port_id,
+		struct rte_eth_bond_8023ad_conf *conf);
 
 /**
  * @internal
@@ -219,4 +248,132 @@ rte_eth_bond_8023ad_slave_info(uint8_t port_id, uint8_t slave_id,
 }
 #endif
 
+/**
+ * Configure a slave port to start collecting.
+ *
+ * @param port_id	Bonding device id
+ * @param slave_id	Port id of valid slave.
+ * @param enabled	Non-zero when collection enabled.
+ * @return
+ *   0 - if ok
+ *   -EINVAL if slave is not valid.
+ */
+int
+rte_eth_bond_8023ad_ext_collect(uint8_t port_id, uint8_t slave_id, int enabled);
+
+/**
+ * Get COLLECTING flag from slave port actor state.
+ *
+ * @param port_id	Bonding device id
+ * @param slave_id	Port id of valid slave.
+ * @return
+ *   0 - if not set
+ *   1 - if set
+ *   -EINVAL if slave is not valid.
+ */
+int
+rte_eth_bond_8023ad_ext_collect_get(uint8_t port_id, uint8_t slave_id);
+
+/**
+ * Configure a slave port to start distributing.
+ *
+ * @param port_id	Bonding device id
+ * @param slave_id	Port id of valid slave.
+ * @param enabled	Non-zero when distribution enabled.
+ * @return
+ *   0 - if ok
+ *   -EINVAL if slave is not valid.
+ */
+int
+rte_eth_bond_8023ad_ext_distrib(uint8_t port_id, uint8_t slave_id, int enabled);
+
+/**
+ * Get DISTRIBUTING flag from slave port actor state.
+ *
+ * @param port_id	Bonding device id
+ * @param slave_id	Port id of valid slave.
+ * @return
+ *   0 - if not set
+ *   1 - if set
+ *   -EINVAL if slave is not valid.
+ */
+int
+rte_eth_bond_8023ad_ext_distrib_get(uint8_t port_id, uint8_t slave_id);
+
+/**
+ * LACPDU transmit path for external 802.3ad state machine.  Caller retains
+ * ownership of the packet on failure.
+ *
+ * @param port_id	Bonding device id
+ * @param slave_id	Port ID of valid slave device.
+ * @param lacp_pkt	mbuf containing LACPDU.
+ *
+ * @return
+ *   0 on success, negative value otherwise.
+ */
+int
+rte_eth_bond_8023ad_ext_slowtx(uint8_t port_id, uint8_t slave_id,
+		struct rte_mbuf *lacp_pkt);
+
+/**
+ * Enable dedicated hw queues for 802.3ad control plane traffic on on slaves
+ *
+ * This function creates an additional tx and rx queue on each slave for
+ * dedicated 802.3ad control plane traffic . A flow filtering rule is
+ * programmed on each slave to redirect all LACP slow packets to that rx queue
+ * for processing in the LACP state machine, this removes the need to filter
+ * these packets in the bonded devices data path. The additional tx queue is
+ * used to enable the LACP state machine to enqueue LACP packets directly to
+ * slave hw independently of the bonded devices data path.
+ *
+ * To use this feature all slaves must support the programming of the flow
+ * filter rule required for rx and have enough queues that one rx and tx queue
+ * can be reserved for the LACP state machines control packets.
+ *
+ * Bonding port must be stopped to change this configuration.
+ *
+ * @param port_id      Bonding device id
+ *
+ * @return
+ *   0 on success, negative value otherwise.
+ */
+int
+rte_eth_bond_8023ad_dedicated_queues_enable(uint8_t port_id);
+
+/**
+ * Disable slow queue on slaves
+ *
+ * This function disables hardware slow packet filter.
+ *
+ * Bonding port must be stopped to change this configuration.
+ *
+ * @see rte_eth_bond_8023ad_slow_pkt_hw_filter_enable
+ *
+ * @param port_id      Bonding device id
+ * @return
+ *   0 on success, negative value otherwise.
+ *
+ */
+int
+rte_eth_bond_8023ad_dedicated_queues_disable(uint8_t port_id);
+
+/*
+ * Get aggregator mode for 8023ad
+ * @param port_id Bonding device id
+ *
+ * @return
+ *   agregator mode on success, negative value otherwise
+ */
+int
+rte_eth_bond_8023ad_agg_selection_get(uint8_t port_id);
+
+/**
+ * Set aggregator mode for 8023ad
+ * @param port_id Bonding device id
+ * @return
+ *   0 on success, negative value otherwise
+ */
+int
+rte_eth_bond_8023ad_agg_selection_set(uint8_t port_id,
+		enum rte_bond_8023ad_agg_selection agg_selection);
 #endif /* RTE_ETH_BOND_8023AD_H_ */