X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=drivers%2Fnet%2Fdpaa2%2Fmc%2Ffsl_dpni.h;h=598911ddd101990d4f00d25d4bae9b746e6d7630;hb=ea2780632f6563f100d0b324b6d027b3b51d2b78;hp=0359a2bc7a917945345ae6e8188ffa957da82d63;hpb=e59b75ffeb9ab81026eb82b75e426a335d740b3b;p=dpdk.git diff --git a/drivers/net/dpaa2/mc/fsl_dpni.h b/drivers/net/dpaa2/mc/fsl_dpni.h index 0359a2bc7a..598911ddd1 100644 --- a/drivers/net/dpaa2/mc/fsl_dpni.h +++ b/drivers/net/dpaa2/mc/fsl_dpni.h @@ -1,7 +1,7 @@ /* SPDX-License-Identifier: (BSD-3-Clause OR GPL-2.0) * * Copyright 2013-2016 Freescale Semiconductor Inc. - * Copyright 2016-2017 NXP + * Copyright 2016-2019 NXP * */ #ifndef __FSL_DPNI_H @@ -91,6 +91,16 @@ struct fsl_mc_io; * All Tx traffic classes will use a single sender (ignore num_queueus for tx) */ #define DPNI_OPT_SINGLE_SENDER 0x000100 +/** + * Define a custom number of congestion groups + */ +#define DPNI_OPT_CUSTOM_CG 0x000200 + + +/** + * Software sequence maximum layout size + */ +#define DPNI_SW_SEQUENCE_LAYOUT_SIZE 33 int dpni_open(struct fsl_mc_io *mc_io, uint32_t cmd_flags, @@ -172,6 +182,7 @@ struct dpni_cfg { uint8_t num_tcs; uint8_t num_rx_tcs; uint8_t qos_entries; + uint8_t num_cgs; }; int dpni_create(struct fsl_mc_io *mc_io, @@ -188,6 +199,8 @@ int dpni_destroy(struct fsl_mc_io *mc_io, /** * struct dpni_pools_cfg - Structure representing buffer pools configuration * @num_dpbp: Number of DPBPs + * @pool_options: Buffer assignment options + * This field is a combination of DPNI_POOL_ASSOC_flags * @pools: Array of buffer pools parameters; The number of valid entries * must match 'num_dpbp' value * @pools.dpbp_id: DPBP object ID @@ -196,8 +209,13 @@ int dpni_destroy(struct fsl_mc_io *mc_io, * @pools.buffer_size: Buffer size * @pools.backup_pool: Backup pool */ + +#define DPNI_POOL_ASSOC_QPRI 0 +#define DPNI_POOL_ASSOC_QDBIN 1 + struct dpni_pools_cfg { uint8_t num_dpbp; + uint8_t pool_options; struct { int dpbp_id; uint8_t priority_mask; @@ -326,6 +344,7 @@ struct dpni_attr { uint8_t qos_key_size; uint8_t fs_key_size; uint16_t wriop_version; + uint8_t num_cgs; }; int dpni_get_attributes(struct fsl_mc_io *mc_io, @@ -569,6 +588,7 @@ int dpni_get_tx_data_offset(struct fsl_mc_io *mc_io, * @page_5.policer_cnt_green: number of green colored frames * @page_5.policer_cnt_re_red: number of recolored red frames * @page_5.policer_cnt_re_yellow: number of recolored yellow frames + * @page_6.tx_pending_frames_cnt: total number of frames pending in Tx queues * @raw: raw statistics structure, used to index counters */ union dpni_statistics { @@ -612,6 +632,9 @@ union dpni_statistics { uint64_t policer_cnt_re_red; uint64_t policer_cnt_re_yellow; } page_5; + struct { + uint64_t tx_pending_frames_cnt; + } page_6; struct { uint64_t counter[DPNI_STATISTICS_CNT]; } raw; @@ -638,6 +661,36 @@ union dpni_statistics { */ #define DPNI_LINK_OPT_PFC_PAUSE 0x0000000000000010ULL +/** + * Advertise 10MB full duplex + */ +#define DPNI_ADVERTISED_10BASET_FULL 0x0000000000000001ULL +/** + * Advertise 100MB full duplex + */ +#define DPNI_ADVERTISED_100BASET_FULL 0x0000000000000002ULL +/** + * Advertise 1GB full duplex + */ +#define DPNI_ADVERTISED_1000BASET_FULL 0x0000000000000004ULL +/** + * Advertise auto-negotiation enable + */ +#define DPNI_ADVERTISED_AUTONEG 0x0000000000000008ULL +/** + * Advertise 10GB full duplex + */ +#define DPNI_ADVERTISED_10000BASET_FULL 0x0000000000000010ULL +/** + * Advertise 2.5GB full duplex + */ +#define DPNI_ADVERTISED_2500BASEX_FULL 0x0000000000000020ULL +/** + * Advertise 5GB full duplex + */ +#define DPNI_ADVERTISED_5000BASET_FULL 0x0000000000000040ULL + + /** * struct - Structure representing DPNI link configuration * @rate: Rate @@ -668,7 +721,7 @@ struct dpni_link_state { uint32_t rate; uint64_t options; int up; - int state_valid; + int state_valid; uint64_t supported; uint64_t advertising; }; @@ -731,7 +784,10 @@ int dpni_get_primary_mac_addr(struct fsl_mc_io *mc_io, int dpni_add_mac_addr(struct fsl_mc_io *mc_io, uint32_t cmd_flags, uint16_t token, - const uint8_t mac_addr[6]); + const uint8_t mac_addr[6], + uint8_t flags, + uint8_t tc_id, + uint8_t flow_id); int dpni_remove_mac_addr(struct fsl_mc_io *mc_io, uint32_t cmd_flags, @@ -754,10 +810,18 @@ int dpni_enable_vlan_filter(struct fsl_mc_io *mc_io, uint16_t token, int en); +/** + * Set vlan filter queue action + */ +#define DPNI_VLAN_SET_QUEUE_ACTION 1 + int dpni_add_vlan_id(struct fsl_mc_io *mc_io, uint32_t cmd_flags, uint16_t token, - uint16_t vlan_id); + uint16_t vlan_id, + uint8_t flags, + uint8_t tc_id, + uint8_t flow_id); int dpni_remove_vlan_id(struct fsl_mc_io *mc_io, uint32_t cmd_flags, @@ -850,7 +914,6 @@ enum dpni_congestion_unit { DPNI_CONGESTION_UNIT_FRAMES }; - /** * enum dpni_dest - DPNI destination types * @DPNI_DEST_NONE: Unassigned destination; The queue is set in parked mode and @@ -924,6 +987,25 @@ struct dpni_dest_cfg { */ #define DPNI_CONG_OPT_FLOW_CONTROL 0x00000040 +/** + * enum dpni_congestion_point - Structure representing congestion point + * @DPNI_CP_QUEUE: Set congestion per queue, identified by QUEUE_TYPE, TC + * and QUEUE_INDEX + * @DPNI_CP_GROUP: Set congestion per queue group. Depending on options + * used to define the DPNI this can be either per + * TC (default) or per interface + * (DPNI_OPT_SHARED_CONGESTION set at DPNI create). + * QUEUE_INDEX is ignored if this type is used. + * @DPNI_CP_CONGESTION_GROUP: Set per congestion group id. This will work + * only if the DPNI is created with DPNI_OPT_CUSTOM_CG option + */ + +enum dpni_congestion_point { + DPNI_CP_QUEUE, + DPNI_CP_GROUP, + DPNI_CP_CONGESTION_GROUP, +}; + /** * struct dpni_congestion_notification_cfg - congestion notification * configuration @@ -937,6 +1019,8 @@ struct dpni_dest_cfg { * contained in 'options' * @dest_cfg: CSCN can be send to either DPIO or DPCON WQ channel * @notification_mode: Mask of available options; use 'DPNI_CONG_OPT_' values + * @cg_point: Congestion point settings + * @cgid: id of the congestion group. The index is relative to dpni. */ struct dpni_congestion_notification_cfg { @@ -947,6 +1031,8 @@ struct dpni_congestion_notification_cfg { uint64_t message_iova; struct dpni_dest_cfg dest_cfg; uint16_t notification_mode; + enum dpni_congestion_point cg_point; + int cgid; }; int dpni_set_congestion_notification(struct fsl_mc_io *mc_io, @@ -1016,6 +1102,7 @@ int dpni_get_congestion_notification(struct fsl_mc_io *mc_io, * FD[OFFSET]. * For more details check the Frame Descriptor section in the * hardware documentation. + *@cgid :indicate the cgid to set relative to dpni */ struct dpni_queue { struct { @@ -1029,6 +1116,7 @@ struct dpni_queue { uint64_t value; char stash_control; } flc; + int cgid; }; /** @@ -1071,6 +1159,125 @@ int dpni_get_tx_confirmation_mode(struct fsl_mc_io *mc_io, uint16_t token, enum dpni_confirmation_mode *mode); +/** + * struct dpni_qos_tbl_cfg - Structure representing QOS table configuration + * @key_cfg_iova: I/O virtual address of 256 bytes DMA-able memory filled with + * key extractions to be used as the QoS criteria by calling + * dpkg_prepare_key_cfg() + * @discard_on_miss: Set to '1' to discard frames in case of no match (miss); + * '0' to use the 'default_tc' in such cases + * @keep_entries: if set to one will not delele existing table entries. This + * option will work properly only for dpni objects created with + * DPNI_OPT_HAS_KEY_MASKING option. All previous QoS entries must + * be compatible with new key composition rule. + * It is the caller's job to delete incompatible entries before + * executing this function. + * @default_tc: Used in case of no-match and 'discard_on_miss'= 0 + */ +struct dpni_qos_tbl_cfg { + uint64_t key_cfg_iova; + int discard_on_miss; + int keep_entries; + uint8_t default_tc; +}; + +int dpni_set_qos_table(struct fsl_mc_io *mc_io, + uint32_t cmd_flags, + uint16_t token, + const struct dpni_qos_tbl_cfg *cfg); + +/** + * struct dpni_rule_cfg - Rule configuration for table lookup + * @key_iova: I/O virtual address of the key (must be in DMA-able memory) + * @mask_iova: I/O virtual address of the mask (must be in DMA-able memory) + * @key_size: key and mask size (in bytes) + */ +struct dpni_rule_cfg { + uint64_t key_iova; + uint64_t mask_iova; + uint8_t key_size; +}; + +int dpni_add_qos_entry(struct fsl_mc_io *mc_io, + uint32_t cmd_flags, + uint16_t token, + const struct dpni_rule_cfg *cfg, + uint8_t tc_id, + uint16_t index, + uint8_t flags, + uint8_t flow_id); + +int dpni_remove_qos_entry(struct fsl_mc_io *mc_io, + uint32_t cmd_flags, + uint16_t token, + const struct dpni_rule_cfg *cfg); + +int dpni_clear_qos_table(struct fsl_mc_io *mc_io, + uint32_t cmd_flags, + uint16_t token); + +/** + * Discard matching traffic. If set, this takes precedence over any other + * configuration and matching traffic is always discarded. + */ + #define DPNI_FS_OPT_DISCARD 0x1 + +/** + * Set FLC value. If set, flc member of truct dpni_fs_action_cfg is used to + * override the FLC value set per queue. + * For more details check the Frame Descriptor section in the hardware + * documentation. + */ +#define DPNI_FS_OPT_SET_FLC 0x2 + +/* + * Indicates whether the 6 lowest significant bits of FLC are used for stash + * control. If set, the 6 least significant bits in value are interpreted as + * follows: + * - bits 0-1: indicates the number of 64 byte units of context that are + * stashed. FLC value is interpreted as a memory address in this case, + * excluding the 6 LS bits. + * - bits 2-3: indicates the number of 64 byte units of frame annotation + * to be stashed. Annotation is placed at FD[ADDR]. + * - bits 4-5: indicates the number of 64 byte units of frame data to be + * stashed. Frame data is placed at FD[ADDR] + FD[OFFSET]. + * This flag is ignored if DPNI_FS_OPT_SET_FLC is not specified. + */ +#define DPNI_FS_OPT_SET_STASH_CONTROL 0x4 + +/** + * struct dpni_fs_action_cfg - Action configuration for table look-up + * @flc: FLC value for traffic matching this rule. Please check the Frame + * Descriptor section in the hardware documentation for more information. + * @flow_id: Identifies the Rx queue used for matching traffic. Supported + * values are in range 0 to num_queue-1. + * @options: Any combination of DPNI_FS_OPT_ values. + */ +struct dpni_fs_action_cfg { + uint64_t flc; + uint16_t flow_id; + uint16_t options; +}; + +int dpni_add_fs_entry(struct fsl_mc_io *mc_io, + uint32_t cmd_flags, + uint16_t token, + uint8_t tc_id, + uint16_t index, + const struct dpni_rule_cfg *cfg, + const struct dpni_fs_action_cfg *action); + +int dpni_remove_fs_entry(struct fsl_mc_io *mc_io, + uint32_t cmd_flags, + uint16_t token, + uint8_t tc_id, + const struct dpni_rule_cfg *cfg); + +int dpni_clear_fs_entries(struct fsl_mc_io *mc_io, + uint32_t cmd_flags, + uint16_t token, + uint8_t tc_id); + int dpni_get_api_version(struct fsl_mc_io *mc_io, uint32_t cmd_flags, uint16_t *major_ver, @@ -1101,6 +1308,9 @@ int dpni_get_api_version(struct fsl_mc_io *mc_io, */ #define DPNI_QUEUE_OPT_HOLD_ACTIVE 0x00000008 +#define DPNI_QUEUE_OPT_SET_CGID 0x00000040 +#define DPNI_QUEUE_OPT_CLEAR_CGID 0x00000080 + int dpni_set_queue(struct fsl_mc_io *mc_io, uint32_t cmd_flags, uint16_t token, @@ -1123,28 +1333,13 @@ int dpni_get_statistics(struct fsl_mc_io *mc_io, uint32_t cmd_flags, uint16_t token, uint8_t page, - uint8_t param, + uint16_t param, union dpni_statistics *stat); int dpni_reset_statistics(struct fsl_mc_io *mc_io, uint32_t cmd_flags, uint16_t token); -/** - * enum dpni_congestion_point - Structure representing congestion point - * @DPNI_CP_QUEUE: Set taildrop per queue, identified by QUEUE_TYPE, TC and - * QUEUE_INDEX - * @DPNI_CP_GROUP: Set taildrop per queue group. Depending on options used - * to define the DPNI this can be either per - * TC (default) or per interface - * (DPNI_OPT_SHARED_CONGESTION set at DPNI create). - * QUEUE_INDEX is ignored if this type is used. - */ -enum dpni_congestion_point { - DPNI_CP_QUEUE, - DPNI_CP_GROUP, -}; - /** * struct dpni_taildrop - Structure representing the taildrop * @enable: Indicates whether the taildrop is active or not. @@ -1202,6 +1397,43 @@ int dpni_get_opr(struct fsl_mc_io *mc_io, struct opr_cfg *cfg, struct opr_qry *qry); +/** + * When used for queue_idx in function dpni_set_rx_dist_default_queue will + * signal to dpni to drop all unclassified frames + */ +#define DPNI_FS_MISS_DROP ((uint16_t)-1) + +/** + * struct dpni_rx_dist_cfg - distribution configuration + * @dist_size: distribution size; supported values: 1,2,3,4,6,7,8, + * 12,14,16,24,28,32,48,56,64,96,112,128,192,224,256,384,448, + * 512,768,896,1024 + * @key_cfg_iova: I/O virtual address of 256 bytes DMA-able memory filled with + * the extractions to be used for the distribution key by calling + * dpkg_prepare_key_cfg() relevant only when enable!=0 otherwise + * it can be '0' + * @enable: enable/disable the distribution. + * @tc: TC id for which distribution is set + * @fs_miss_flow_id: when packet misses all rules from flow steering table and + * hash is disabled it will be put into this queue id; use + * DPNI_FS_MISS_DROP to drop frames. The value of this field is + * used only when flow steering distribution is enabled and hash + * distribution is disabled + */ +struct dpni_rx_dist_cfg { + uint16_t dist_size; + uint64_t key_cfg_iova; + uint8_t enable; + uint8_t tc; + uint16_t fs_miss_flow_id; +}; + +int dpni_set_rx_fs_dist(struct fsl_mc_io *mc_io, uint32_t cmd_flags, + uint16_t token, const struct dpni_rx_dist_cfg *cfg); + +int dpni_set_rx_hash_dist(struct fsl_mc_io *mc_io, uint32_t cmd_flags, + uint16_t token, const struct dpni_rx_dist_cfg *cfg); + int dpni_add_custom_tpid(struct fsl_mc_io *mc_io, uint32_t cmd_flags, uint16_t token, uint16_t tpid); @@ -1222,4 +1454,131 @@ struct dpni_custom_tpid_cfg { int dpni_get_custom_tpid(struct fsl_mc_io *mc_io, uint32_t cmd_flags, uint16_t token, struct dpni_custom_tpid_cfg *tpid); +/** + * enum dpni_soft_sequence_dest - Enumeration of WRIOP software sequence + * destinations + * @DPNI_SS_INGRESS: Ingress parser + * @DPNI_SS_EGRESS: Egress parser + */ +enum dpni_soft_sequence_dest { + DPNI_SS_INGRESS = 0, + DPNI_SS_EGRESS = 1, +}; + +/** + * struct dpni_load_ss_cfg - Structure for Software Sequence load configuration + * @dest: Destination of the Software Sequence: ingress or egress parser + * @ss_size: Size of the Software Sequence + * @ss_offset: The offset where to load the Software Sequence (0x20-0x7FD) + * @ss_iova: I/O virtual address of the Software Sequence + */ +struct dpni_load_ss_cfg { + enum dpni_soft_sequence_dest dest; + uint16_t ss_size; + uint16_t ss_offset; + uint64_t ss_iova; +}; + +/** + * struct dpni_enable_ss_cfg - Structure for software sequence enable + * configuration + * @dest: Destination of the Software Sequence: ingress or egress parser + * @hxs: HXS to attach the software sequence to + * @set_start: If the Software Sequence or HDR it is attached to is set as + * parser start + * If hxs=DUMMY_LAST_HXS the ss_offset is set directly as parser + * start else the hdr index code is set as parser start + * @ss_offset: The offset of the Software Sequence to enable or set as parse + * start + * @param_size: Size of the software sequence parameters + * @param_offset: Offset in the parameter zone for the software sequence + * parameters + * @param_iova: I/O virtual address of the parameters + */ +struct dpni_enable_ss_cfg { + enum dpni_soft_sequence_dest dest; + uint16_t hxs; + uint8_t set_start; + uint16_t ss_offset; + uint8_t param_size; + uint8_t param_offset; + uint64_t param_iova; +}; + +/** + * dpni_load_sw_sequence() - Loads a software sequence in parser memory. + * @mc_io: Pointer to MC portal's I/O object + * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' + * @token: Token of DPNI object + * @cfg: Software sequence load configuration + * Return: '0' on Success; Error code otherwise. + */ +int dpni_load_sw_sequence(struct fsl_mc_io *mc_io, + uint32_t cmd_flags, + uint16_t token, + struct dpni_load_ss_cfg *cfg); + +/** + * dpni_eanble_sw_sequence() - Enables a software sequence in the parser + * profile + * corresponding to the ingress or egress of the DPNI. + * @mc_io: Pointer to MC portal's I/O object + * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' + * @token: Token of DPNI object + * @cfg: Software sequence enable configuration + * Return: '0' on Success; Error code otherwise. + */ +int dpni_enable_sw_sequence(struct fsl_mc_io *mc_io, + uint32_t cmd_flags, + uint16_t token, + struct dpni_enable_ss_cfg *cfg); + +/** + * struct dpni_sw_sequence_layout - Structure for software sequence enable + * configuration + * @num_ss: Number of software sequences returned + * @ss: Array of software sequence entries. The number of valid entries + * must match 'num_ss' value + */ +struct dpni_sw_sequence_layout { + uint8_t num_ss; + struct { + uint16_t ss_offset; + uint16_t ss_size; + uint8_t param_offset; + uint8_t param_size; + } ss[DPNI_SW_SEQUENCE_LAYOUT_SIZE]; +}; + +/** + * dpni_get_sw_sequence_layout() - Get the soft sequence layout + * @mc_io: Pointer to MC portal's I/O object + * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' + * @token: Token of DPNI object + * @src: Source of the layout (WRIOP Rx or Tx) + * @ss_layout_iova: I/O virtual address of 264 bytes DMA-able memory + * + * warning: After calling this function, call dpni_extract_sw_sequence_layout() + * to get the layout + * + * Return: '0' on Success; error code otherwise. + */ +int dpni_get_sw_sequence_layout(struct fsl_mc_io *mc_io, + uint32_t cmd_flags, + uint16_t token, + enum dpni_soft_sequence_dest src, + uint64_t ss_layout_iova); + +/** + * dpni_extract_sw_sequence_layout() - extract the software sequence layout + * @layout: software sequence layout + * @sw_sequence_layout_buf: Zeroed 264 bytes of memory before mapping it + * to DMA + * + * This function has to be called after dpni_get_sw_sequence_layout + * + */ +void dpni_extract_sw_sequence_layout(struct dpni_sw_sequence_layout *layout, + const uint8_t *sw_sequence_layout_buf); + #endif /* __FSL_DPNI_H */