X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=drivers%2Fnet%2Fe1000%2Fbase%2Fe1000_82575.c;h=15c7dd84458b175144770321930f666abcdf7b53;hb=3e92fd4e4ec0c7ba13ae0ca003a2730b42e1239e;hp=74c18fcc7097b55d8030cf83263ac31b9b29fda8;hpb=975ba6912fc40cf54f1537c85bab65147084f97c;p=dpdk.git

diff --git a/drivers/net/e1000/base/e1000_82575.c b/drivers/net/e1000/base/e1000_82575.c
index 74c18fcc70..15c7dd8445 100644
--- a/drivers/net/e1000/base/e1000_82575.c
+++ b/drivers/net/e1000/base/e1000_82575.c
@@ -100,7 +100,6 @@ STATIC s32 e1000_validate_nvm_checksum_with_offset(struct e1000_hw *hw,
 						   u16 offset);
 STATIC s32 e1000_validate_nvm_checksum_i350(struct e1000_hw *hw);
 STATIC s32 e1000_update_nvm_checksum_i350(struct e1000_hw *hw);
-STATIC void e1000_write_vfta_i350(struct e1000_hw *hw, u32 offset, u32 value);
 STATIC void e1000_clear_vfta_i350(struct e1000_hw *hw);
 
 STATIC void e1000_i2c_start(struct e1000_hw *hw);
@@ -277,6 +276,11 @@ STATIC s32 e1000_init_phy_params_82575(struct e1000_hw *hw)
 			if (ret_val)
 				goto out;
 		}
+		if (phy->id == M88E1543_E_PHY_ID) {
+			ret_val = e1000_initialize_M88E1543_phy(hw);
+			if (ret_val)
+				goto out;
+		}
 		break;
 	case IGP03E1000_E_PHY_ID:
 	case IGP04E1000_E_PHY_ID:
@@ -2132,7 +2136,7 @@ STATIC void e1000_clear_hw_cntrs_82575(struct e1000_hw *hw)
  *  e1000_rx_fifo_flush_82575 - Clean rx fifo after Rx enable
  *  @hw: pointer to the HW structure
  *
- *  After rx enable if managability is enabled then there is likely some
+ *  After Rx enable, if manageability is enabled then there is likely some
  *  bad data at the start of the fifo and possibly in the DMA fifo.  This
  *  function clears the fifos and flushes any packets that came in as rx was
  *  being enabled.
@@ -2142,7 +2146,13 @@ void e1000_rx_fifo_flush_82575(struct e1000_hw *hw)
 	u32 rctl, rlpml, rxdctl[4], rfctl, temp_rctl, rx_enabled;
 	int i, ms_wait;
 
-	DEBUGFUNC("e1000_rx_fifo_workaround_82575");
+	DEBUGFUNC("e1000_rx_fifo_flush_82575");
+
+	/* disable IPv6 options as per hardware errata */
+	rfctl = E1000_READ_REG(hw, E1000_RFCTL);
+	rfctl |= E1000_RFCTL_IPV6_EX_DIS;
+	E1000_WRITE_REG(hw, E1000_RFCTL, rfctl);
+
 	if (hw->mac.type != e1000_82575 ||
 	    !(E1000_READ_REG(hw, E1000_MANC) & E1000_MANC_RCV_TCO_EN))
 		return;
@@ -2170,7 +2180,6 @@ void e1000_rx_fifo_flush_82575(struct e1000_hw *hw)
 	 * incoming packets are rejected.  Set enable and wait 2ms so that
 	 * any packet that was coming in as RCTL.EN was set is flushed
 	 */
-	rfctl = E1000_READ_REG(hw, E1000_RFCTL);
 	E1000_WRITE_REG(hw, E1000_RFCTL, rfctl & ~E1000_RFCTL_LEF);
 
 	rlpml = E1000_READ_REG(hw, E1000_RLPML);
@@ -2405,7 +2414,7 @@ out:
  *  e1000_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits
  *  @hw: pointer to the HW structure
  *
- *  This resets the the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
+ *  This resets the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
  *  the values found in the EEPROM.  This addresses an issue in which these
  *  bits are not restored from EEPROM after reset.
  **/
@@ -2812,7 +2821,7 @@ s32 e1000_read_emi_reg(struct e1000_hw *hw, u16 addr, u16 *data)
  *  e1000_initialize_M88E1512_phy - Initialize M88E1512 PHY
  *  @hw: pointer to the HW structure
  *
- *  Initialize Marverl 1512 to work correctly with Avoton.
+ *  Initialize Marvell 1512 to work correctly with Avoton.
  **/
 s32 e1000_initialize_M88E1512_phy(struct e1000_hw *hw)
 {
@@ -2897,16 +2906,116 @@ out:
 	return ret_val;
 }
 
+/**
+ *  e1000_initialize_M88E1543_phy - Initialize M88E1543 PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Initialize Marvell 1543 to work correctly with Avoton.
+ **/
+s32 e1000_initialize_M88E1543_phy(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val = E1000_SUCCESS;
+
+	DEBUGFUNC("e1000_initialize_M88E1543_phy");
+
+	/* Check if this is correct PHY. */
+	if (phy->id != M88E1543_E_PHY_ID)
+		goto out;
+
+	/* Switch to PHY page 0xFF. */
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x00FF);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0x214B);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2144);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0x0C28);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2146);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0xB233);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x214D);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0xDC0C);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2159);
+	if (ret_val)
+		goto out;
+
+	/* Switch to PHY page 0xFB. */
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x00FB);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_3, 0xC00D);
+	if (ret_val)
+		goto out;
+
+	/* Switch to PHY page 0x12. */
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x12);
+	if (ret_val)
+		goto out;
+
+	/* Change mode to SGMII-to-Copper */
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_MODE, 0x8001);
+	if (ret_val)
+		goto out;
+
+	/* Switch to PHY page 1. */
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x1);
+	if (ret_val)
+		goto out;
+
+	/* Change mode to 1000BASE-X/SGMII and autoneg enable; reset */
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1543_FIBER_CTRL, 0x9140);
+	if (ret_val)
+		goto out;
+
+	/* Return the PHY to page 0. */
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.commit(hw);
+	if (ret_val) {
+		DEBUGOUT("Error committing the PHY changes\n");
+		return ret_val;
+	}
+
+	msec_delay(1000);
+out:
+	return ret_val;
+}
+
 /**
  *  e1000_set_eee_i350 - Enable/disable EEE support
  *  @hw: pointer to the HW structure
+ *  @adv1g: boolean flag enabling 1G EEE advertisement
+ *  @adv100m: boolean flag enabling 100M EEE advertisement
  *
  *  Enable/disable EEE based on setting in dev_spec structure.
  *
  **/
-s32 e1000_set_eee_i350(struct e1000_hw *hw)
+s32 e1000_set_eee_i350(struct e1000_hw *hw, bool adv1G, bool adv100M)
 {
-	s32 ret_val = E1000_SUCCESS;
 	u32 ipcnfg, eeer;
 
 	DEBUGFUNC("e1000_set_eee_i350");
@@ -2921,7 +3030,16 @@ s32 e1000_set_eee_i350(struct e1000_hw *hw)
 	if (!(hw->dev_spec._82575.eee_disable)) {
 		u32 eee_su = E1000_READ_REG(hw, E1000_EEE_SU);
 
-		ipcnfg |= (E1000_IPCNFG_EEE_1G_AN | E1000_IPCNFG_EEE_100M_AN);
+		if (adv100M)
+			ipcnfg |= E1000_IPCNFG_EEE_100M_AN;
+		else
+			ipcnfg &= ~E1000_IPCNFG_EEE_100M_AN;
+
+		if (adv1G)
+			ipcnfg |= E1000_IPCNFG_EEE_1G_AN;
+		else
+			ipcnfg &= ~E1000_IPCNFG_EEE_1G_AN;
+
 		eeer |= (E1000_EEER_TX_LPI_EN | E1000_EEER_RX_LPI_EN |
 			 E1000_EEER_LPI_FC);
 
@@ -2939,17 +3057,19 @@ s32 e1000_set_eee_i350(struct e1000_hw *hw)
 	E1000_READ_REG(hw, E1000_EEER);
 out:
 
-	return ret_val;
+	return E1000_SUCCESS;
 }
 
 /**
  *  e1000_set_eee_i354 - Enable/disable EEE support
  *  @hw: pointer to the HW structure
+ *  @adv1g: boolean flag enabling 1G EEE advertisement
+ *  @adv100m: boolean flag enabling 100M EEE advertisement
  *
  *  Enable/disable EEE legacy mode based on setting in dev_spec structure.
  *
  **/
-s32 e1000_set_eee_i354(struct e1000_hw *hw)
+s32 e1000_set_eee_i354(struct e1000_hw *hw, bool adv1G, bool adv100M)
 {
 	struct e1000_phy_info *phy = &hw->phy;
 	s32 ret_val = E1000_SUCCESS;
@@ -2991,8 +3111,16 @@ s32 e1000_set_eee_i354(struct e1000_hw *hw)
 		if (ret_val)
 			goto out;
 
-		phy_data |= E1000_EEE_ADV_100_SUPPORTED |
-			    E1000_EEE_ADV_1000_SUPPORTED;
+		if (adv100M)
+			phy_data |= E1000_EEE_ADV_100_SUPPORTED;
+		else
+			phy_data &= ~E1000_EEE_ADV_100_SUPPORTED;
+
+		if (adv1G)
+			phy_data |= E1000_EEE_ADV_1000_SUPPORTED;
+		else
+			phy_data &= ~E1000_EEE_ADV_1000_SUPPORTED;
+
 		ret_val = e1000_write_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354,
 						E1000_EEE_ADV_DEV_I354,
 						phy_data);