X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=drivers%2Fnet%2Fe1000%2Fbase%2Fe1000_82575.c;h=723885d75c49bea19e828481c37ecd6ba80c461f;hb=b3fa893d84d650f82cc7250d895c84dff0c7ce5b;hp=f44e72f7afd262647fef20db19599f26e9d2ae3a;hpb=bf36acdc7d6fe04c9961299dd0d18b426ecf1036;p=dpdk.git

diff --git a/drivers/net/e1000/base/e1000_82575.c b/drivers/net/e1000/base/e1000_82575.c
index f44e72f7af..723885d75c 100644
--- a/drivers/net/e1000/base/e1000_82575.c
+++ b/drivers/net/e1000/base/e1000_82575.c
@@ -277,6 +277,11 @@ STATIC s32 e1000_init_phy_params_82575(struct e1000_hw *hw)
 			if (ret_val)
 				goto out;
 		}
+		if (phy->id == M88E1543_E_PHY_ID) {
+			ret_val = e1000_initialize_M88E1543_phy(hw);
+			if (ret_val)
+				goto out;
+		}
 		break;
 	case IGP03E1000_E_PHY_ID:
 	case IGP04E1000_E_PHY_ID:
@@ -1234,7 +1239,7 @@ STATIC s32 e1000_check_for_link_media_swap(struct e1000_hw *hw)
 
 	DEBUGFUNC("e1000_check_for_link_media_swap");
 
-	/* Check the copper medium. */
+	/* Check for copper. */
 	ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 0);
 	if (ret_val)
 		return ret_val;
@@ -1246,7 +1251,7 @@ STATIC s32 e1000_check_for_link_media_swap(struct e1000_hw *hw)
 	if (data & E1000_M88E1112_STATUS_LINK)
 		port = E1000_MEDIA_PORT_COPPER;
 
-	/* Check the other medium. */
+	/* Check for other. */
 	ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 1);
 	if (ret_val)
 		return ret_val;
@@ -1255,11 +1260,6 @@ STATIC s32 e1000_check_for_link_media_swap(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	/* reset page to 0 */
-	ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 0);
-	if (ret_val)
-		return ret_val;
-
 	if (data & E1000_M88E1112_STATUS_LINK)
 		port = E1000_MEDIA_PORT_OTHER;
 
@@ -1267,8 +1267,20 @@ STATIC s32 e1000_check_for_link_media_swap(struct e1000_hw *hw)
 	if (port && (hw->dev_spec._82575.media_port != port)) {
 		hw->dev_spec._82575.media_port = port;
 		hw->dev_spec._82575.media_changed = true;
+	}
+
+	if (port == E1000_MEDIA_PORT_COPPER) {
+		/* reset page to 0 */
+		ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 0);
+		if (ret_val)
+			return ret_val;
+		e1000_check_for_link_82575(hw);
 	} else {
-		ret_val = e1000_check_for_link_82575(hw);
+		e1000_check_for_link_82575(hw);
+		/* reset page to 0 */
+		ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 0);
+		if (ret_val)
+			return ret_val;
 	}
 
 	return E1000_SUCCESS;
@@ -2125,7 +2137,7 @@ STATIC void e1000_clear_hw_cntrs_82575(struct e1000_hw *hw)
  *  e1000_rx_fifo_flush_82575 - Clean rx fifo after Rx enable
  *  @hw: pointer to the HW structure
  *
- *  After rx enable if managability is enabled then there is likely some
+ *  After Rx enable, if manageability is enabled then there is likely some
  *  bad data at the start of the fifo and possibly in the DMA fifo.  This
  *  function clears the fifos and flushes any packets that came in as rx was
  *  being enabled.
@@ -2135,7 +2147,13 @@ void e1000_rx_fifo_flush_82575(struct e1000_hw *hw)
 	u32 rctl, rlpml, rxdctl[4], rfctl, temp_rctl, rx_enabled;
 	int i, ms_wait;
 
-	DEBUGFUNC("e1000_rx_fifo_workaround_82575");
+	DEBUGFUNC("e1000_rx_fifo_flush_82575");
+
+	/* disable IPv6 options as per hardware errata */
+	rfctl = E1000_READ_REG(hw, E1000_RFCTL);
+	rfctl |= E1000_RFCTL_IPV6_EX_DIS;
+	E1000_WRITE_REG(hw, E1000_RFCTL, rfctl);
+
 	if (hw->mac.type != e1000_82575 ||
 	    !(E1000_READ_REG(hw, E1000_MANC) & E1000_MANC_RCV_TCO_EN))
 		return;
@@ -2163,7 +2181,6 @@ void e1000_rx_fifo_flush_82575(struct e1000_hw *hw)
 	 * incoming packets are rejected.  Set enable and wait 2ms so that
 	 * any packet that was coming in as RCTL.EN was set is flushed
 	 */
-	rfctl = E1000_READ_REG(hw, E1000_RFCTL);
 	E1000_WRITE_REG(hw, E1000_RFCTL, rfctl & ~E1000_RFCTL_LEF);
 
 	rlpml = E1000_READ_REG(hw, E1000_RLPML);
@@ -2487,11 +2504,17 @@ STATIC s32 e1000_reset_hw_82580(struct e1000_hw *hw)
 		ctrl |= E1000_CTRL_RST;
 
 	E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
-	E1000_WRITE_FLUSH(hw);
 
-	/* Add delay to insure DEV_RST has time to complete */
-	if (global_device_reset)
-		msec_delay(5);
+	switch (hw->device_id) {
+	case E1000_DEV_ID_DH89XXCC_SGMII:
+		break;
+	default:
+		E1000_WRITE_FLUSH(hw);
+		break;
+	}
+
+	/* Add delay to insure DEV_RST or RST has time to complete */
+	msec_delay(5);
 
 	ret_val = e1000_get_auto_rd_done_generic(hw);
 	if (ret_val) {
@@ -2799,7 +2822,7 @@ s32 e1000_read_emi_reg(struct e1000_hw *hw, u16 addr, u16 *data)
  *  e1000_initialize_M88E1512_phy - Initialize M88E1512 PHY
  *  @hw: pointer to the HW structure
  *
- *  Initialize Marverl 1512 to work correctly with Avoton.
+ *  Initialize Marvell 1512 to work correctly with Avoton.
  **/
 s32 e1000_initialize_M88E1512_phy(struct e1000_hw *hw)
 {
@@ -2884,16 +2907,116 @@ out:
 	return ret_val;
 }
 
+/**
+ *  e1000_initialize_M88E1543_phy - Initialize M88E1543 PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Initialize Marvell 1543 to work correctly with Avoton.
+ **/
+s32 e1000_initialize_M88E1543_phy(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val = E1000_SUCCESS;
+
+	DEBUGFUNC("e1000_initialize_M88E1543_phy");
+
+	/* Check if this is correct PHY. */
+	if (phy->id != M88E1543_E_PHY_ID)
+		goto out;
+
+	/* Switch to PHY page 0xFF. */
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x00FF);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0x214B);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2144);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0x0C28);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2146);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0xB233);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x214D);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0xDC0C);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2159);
+	if (ret_val)
+		goto out;
+
+	/* Switch to PHY page 0xFB. */
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x00FB);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_3, 0xC00D);
+	if (ret_val)
+		goto out;
+
+	/* Switch to PHY page 0x12. */
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x12);
+	if (ret_val)
+		goto out;
+
+	/* Change mode to SGMII-to-Copper */
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_MODE, 0x8001);
+	if (ret_val)
+		goto out;
+
+	/* Switch to PHY page 1. */
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x1);
+	if (ret_val)
+		goto out;
+
+	/* Change mode to 1000BASE-X/SGMII and autoneg enable; reset */
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1543_FIBER_CTRL, 0x9140);
+	if (ret_val)
+		goto out;
+
+	/* Return the PHY to page 0. */
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.commit(hw);
+	if (ret_val) {
+		DEBUGOUT("Error committing the PHY changes\n");
+		return ret_val;
+	}
+
+	msec_delay(1000);
+out:
+	return ret_val;
+}
+
 /**
  *  e1000_set_eee_i350 - Enable/disable EEE support
  *  @hw: pointer to the HW structure
+ *  @adv1g: boolean flag enabling 1G EEE advertisement
+ *  @adv100m: boolean flag enabling 100M EEE advertisement
  *
  *  Enable/disable EEE based on setting in dev_spec structure.
  *
  **/
-s32 e1000_set_eee_i350(struct e1000_hw *hw)
+s32 e1000_set_eee_i350(struct e1000_hw *hw, bool adv1G, bool adv100M)
 {
-	s32 ret_val = E1000_SUCCESS;
 	u32 ipcnfg, eeer;
 
 	DEBUGFUNC("e1000_set_eee_i350");
@@ -2908,7 +3031,16 @@ s32 e1000_set_eee_i350(struct e1000_hw *hw)
 	if (!(hw->dev_spec._82575.eee_disable)) {
 		u32 eee_su = E1000_READ_REG(hw, E1000_EEE_SU);
 
-		ipcnfg |= (E1000_IPCNFG_EEE_1G_AN | E1000_IPCNFG_EEE_100M_AN);
+		if (adv100M)
+			ipcnfg |= E1000_IPCNFG_EEE_100M_AN;
+		else
+			ipcnfg &= ~E1000_IPCNFG_EEE_100M_AN;
+
+		if (adv1G)
+			ipcnfg |= E1000_IPCNFG_EEE_1G_AN;
+		else
+			ipcnfg &= ~E1000_IPCNFG_EEE_1G_AN;
+
 		eeer |= (E1000_EEER_TX_LPI_EN | E1000_EEER_RX_LPI_EN |
 			 E1000_EEER_LPI_FC);
 
@@ -2926,17 +3058,19 @@ s32 e1000_set_eee_i350(struct e1000_hw *hw)
 	E1000_READ_REG(hw, E1000_EEER);
 out:
 
-	return ret_val;
+	return E1000_SUCCESS;
 }
 
 /**
  *  e1000_set_eee_i354 - Enable/disable EEE support
  *  @hw: pointer to the HW structure
+ *  @adv1g: boolean flag enabling 1G EEE advertisement
+ *  @adv100m: boolean flag enabling 100M EEE advertisement
  *
  *  Enable/disable EEE legacy mode based on setting in dev_spec structure.
  *
  **/
-s32 e1000_set_eee_i354(struct e1000_hw *hw)
+s32 e1000_set_eee_i354(struct e1000_hw *hw, bool adv1G, bool adv100M)
 {
 	struct e1000_phy_info *phy = &hw->phy;
 	s32 ret_val = E1000_SUCCESS;
@@ -2978,8 +3112,16 @@ s32 e1000_set_eee_i354(struct e1000_hw *hw)
 		if (ret_val)
 			goto out;
 
-		phy_data |= E1000_EEE_ADV_100_SUPPORTED |
-			    E1000_EEE_ADV_1000_SUPPORTED;
+		if (adv100M)
+			phy_data |= E1000_EEE_ADV_100_SUPPORTED;
+		else
+			phy_data &= ~E1000_EEE_ADV_100_SUPPORTED;
+
+		if (adv1G)
+			phy_data |= E1000_EEE_ADV_1000_SUPPORTED;
+		else
+			phy_data &= ~E1000_EEE_ADV_1000_SUPPORTED;
+
 		ret_val = e1000_write_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354,
 						E1000_EEE_ADV_DEV_I354,
 						phy_data);