X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=drivers%2Fnet%2Ffm10k%2Fbase%2Ffm10k_pf.c;h=db5f4912f1591abb27e317b145de00cc36b56971;hb=f487fbf500a84727c742fb88cb9720f2422b309d;hp=716d7f1bd2757f808c7c84688f1aa5569353e667;hpb=af57412aef29d0e5a591bd9100672f799a3b0c78;p=dpdk.git diff --git a/drivers/net/fm10k/base/fm10k_pf.c b/drivers/net/fm10k/base/fm10k_pf.c index 716d7f1bd2..db5f4912f1 100644 --- a/drivers/net/fm10k/base/fm10k_pf.c +++ b/drivers/net/fm10k/base/fm10k_pf.c @@ -66,21 +66,21 @@ STATIC s32 fm10k_reset_hw_pf(struct fm10k_hw *hw) /* shut down all rings */ err = fm10k_disable_queues_generic(hw, FM10K_MAX_QUEUES); - if (err) + if (err == FM10K_ERR_REQUESTS_PENDING) { + hw->mac.reset_while_pending++; + goto force_reset; + } else if (err) { return err; + } /* Verify that DMA is no longer active */ reg = FM10K_READ_REG(hw, FM10K_DMA_CTRL); if (reg & (FM10K_DMA_CTRL_TX_ACTIVE | FM10K_DMA_CTRL_RX_ACTIVE)) return FM10K_ERR_DMA_PENDING; - /* verify the switch is ready for reset */ - reg = FM10K_READ_REG(hw, FM10K_DMA_CTRL2); - if (!(reg & FM10K_DMA_CTRL2_SWITCH_READY)) - goto out; - +force_reset: /* Inititate data path reset */ - reg |= FM10K_DMA_CTRL_DATAPATH_RESET; + reg = FM10K_DMA_CTRL_DATAPATH_RESET; FM10K_WRITE_REG(hw, FM10K_DMA_CTRL, reg); /* Flush write and allow 100us for reset to complete */ @@ -90,10 +90,9 @@ STATIC s32 fm10k_reset_hw_pf(struct fm10k_hw *hw) /* Verify we made it out of reset */ reg = FM10K_READ_REG(hw, FM10K_IP); if (!(reg & FM10K_IP_NOTINRESET)) - err = FM10K_ERR_RESET_FAILED; + return FM10K_ERR_RESET_FAILED; -out: - return err; + return FM10K_SUCCESS; } /** @@ -255,8 +254,8 @@ STATIC s32 fm10k_update_vlan_pf(struct fm10k_hw *hw, u32 vid, u8 vsi, bool set) /* VLAN multi-bit write: * The multi-bit write has several parts to it. - * 3 2 1 0 - * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * 24 16 8 0 + * 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ * | RSVD0 | Length |C|RSVD0| VLAN ID | * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ @@ -412,7 +411,7 @@ STATIC s32 fm10k_update_uc_addr_pf(struct fm10k_hw *hw, u16 glort, DEBUGFUNC("fm10k_update_uc_addr_pf"); /* verify MAC address is valid */ - if (!FM10K_IS_VALID_ETHER_ADDR(mac)) + if (!IS_VALID_ETHER_ADDR(mac)) return FM10K_ERR_PARAM; return fm10k_update_xc_addr_pf(hw, glort, mac, vid, add, flags); @@ -435,7 +434,7 @@ STATIC s32 fm10k_update_mc_addr_pf(struct fm10k_hw *hw, u16 glort, DEBUGFUNC("fm10k_update_mc_addr_pf"); /* verify multicast address is valid */ - if (!FM10K_IS_MULTICAST_ETHER_ADDR(mac)) + if (!IS_MULTICAST_ETHER_ADDR(mac)) return FM10K_ERR_PARAM; return fm10k_update_xc_addr_pf(hw, glort, mac, vid, add, 0); @@ -536,6 +535,10 @@ STATIC s32 fm10k_update_lport_state_pf(struct fm10k_hw *hw, u16 glort, if (!fm10k_glort_valid_pf(hw, glort)) return FM10K_ERR_PARAM; + /* reset multicast mode if deleting lport */ + if (!enable) + fm10k_update_xcast_mode_pf(hw, glort, FM10K_XCAST_MODE_NONE); + /* construct the lport message from the 2 pieces of data we have */ lport_msg = ((u32)count << 16) | glort; @@ -759,8 +762,8 @@ STATIC s32 fm10k_iov_assign_resources_pf(struct fm10k_hw *hw, u16 num_vfs, FM10K_RXDCTL_WRITE_BACK_MIN_DELAY | FM10K_RXDCTL_DROP_ON_EMPTY); FM10K_WRITE_REG(hw, FM10K_RXQCTL(vf_q_idx), - FM10K_RXQCTL_VF | - (i << FM10K_RXQCTL_VF_SHIFT)); + (i << FM10K_RXQCTL_VF_SHIFT) | + FM10K_RXQCTL_VF); /* map queue pair to VF */ FM10K_WRITE_REG(hw, FM10K_TQMAP(qmap_idx), vf_q_idx); @@ -908,13 +911,13 @@ STATIC s32 fm10k_iov_assign_default_mac_vlan_pf(struct fm10k_hw *hw, vf_q_idx = fm10k_vf_queue_index(hw, vf_idx); qmap_idx = qmap_stride * vf_idx; - /* MAP Tx queue back to 0 temporarily, and disable it */ - FM10K_WRITE_REG(hw, FM10K_TQMAP(qmap_idx), 0); - FM10K_WRITE_REG(hw, FM10K_TXDCTL(vf_q_idx), 0); - - /* determine correct default VLAN ID */ + /* Determine correct default VLAN ID. The FM10K_VLAN_OVERRIDE bit is + * used here to indicate to the VF that it will not have privilege to + * write VLAN_TABLE. All policy is enforced on the PF but this allows + * the VF to correctly report errors to userspace rqeuests. + */ if (vf_info->pf_vid) - vf_vid = vf_info->pf_vid | FM10K_VLAN_CLEAR; + vf_vid = vf_info->pf_vid | FM10K_VLAN_OVERRIDE; else vf_vid = vf_info->sw_vid; @@ -923,9 +926,35 @@ STATIC s32 fm10k_iov_assign_default_mac_vlan_pf(struct fm10k_hw *hw, fm10k_tlv_attr_put_mac_vlan(msg, FM10K_MAC_VLAN_MSG_DEFAULT_MAC, vf_info->mac, vf_vid); - /* load onto outgoing mailbox, ignore any errors on enqueue */ - if (vf_info->mbx.ops.enqueue_tx) - vf_info->mbx.ops.enqueue_tx(hw, &vf_info->mbx, msg); + /* Configure Queue control register with new VLAN ID. The TXQCTL + * register is RO from the VF, so the PF must do this even in the + * case of notifying the VF of a new VID via the mailbox. + */ + txqctl = ((u32)vf_vid << FM10K_TXQCTL_VID_SHIFT) & + FM10K_TXQCTL_VID_MASK; + txqctl |= (vf_idx << FM10K_TXQCTL_TC_SHIFT) | + FM10K_TXQCTL_VF | vf_idx; + + for (i = 0; i < queues_per_pool; i++) + FM10K_WRITE_REG(hw, FM10K_TXQCTL(vf_q_idx + i), txqctl); + + /* try loading a message onto outgoing mailbox first */ + if (vf_info->mbx.ops.enqueue_tx) { + err = vf_info->mbx.ops.enqueue_tx(hw, &vf_info->mbx, msg); + if (err != FM10K_MBX_ERR_NO_MBX) + return err; + err = FM10K_SUCCESS; + } + + /* If we aren't connected to a mailbox, this is most likely because + * the VF driver is not running. It should thus be safe to re-map + * queues and use the registers to pass the MAC address so that the VF + * driver gets correct information during its initialization. + */ + + /* MAP Tx queue back to 0 temporarily, and disable it */ + FM10K_WRITE_REG(hw, FM10K_TQMAP(qmap_idx), 0); + FM10K_WRITE_REG(hw, FM10K_TXDCTL(vf_q_idx), 0); /* verify ring has disabled before modifying base address registers */ txdctl = FM10K_READ_REG(hw, FM10K_TXDCTL(vf_q_idx)); @@ -941,7 +970,7 @@ STATIC s32 fm10k_iov_assign_default_mac_vlan_pf(struct fm10k_hw *hw, } /* Update base address registers to contain MAC address */ - if (FM10K_IS_VALID_ETHER_ADDR(vf_info->mac)) { + if (IS_VALID_ETHER_ADDR(vf_info->mac)) { tdbal = (((u32)vf_info->mac[3]) << 24) | (((u32)vf_info->mac[4]) << 16) | (((u32)vf_info->mac[5]) << 8); @@ -964,16 +993,6 @@ STATIC s32 fm10k_iov_assign_default_mac_vlan_pf(struct fm10k_hw *hw, FM10K_TDLEN_ITR_SCALE_SHIFT); err_out: - /* configure Queue control register */ - txqctl = ((u32)vf_vid << FM10K_TXQCTL_VID_SHIFT) & - FM10K_TXQCTL_VID_MASK; - txqctl |= (vf_idx << FM10K_TXQCTL_TC_SHIFT) | - FM10K_TXQCTL_VF | vf_idx; - - /* assign VLAN ID */ - for (i = 0; i < queues_per_pool; i++) - FM10K_WRITE_REG(hw, FM10K_TXQCTL(vf_q_idx + i), txqctl); - /* restore the queue back to VF ownership */ FM10K_WRITE_REG(hw, FM10K_TQMAP(qmap_idx), vf_q_idx); return err; @@ -1035,7 +1054,7 @@ STATIC s32 fm10k_iov_reset_resources_pf(struct fm10k_hw *hw, txqctl = ((u32)vf_vid << FM10K_TXQCTL_VID_SHIFT) | (vf_idx << FM10K_TXQCTL_TC_SHIFT) | FM10K_TXQCTL_VF | vf_idx; - rxqctl = FM10K_RXQCTL_VF | (vf_idx << FM10K_RXQCTL_VF_SHIFT); + rxqctl = (vf_idx << FM10K_RXQCTL_VF_SHIFT) | FM10K_RXQCTL_VF; /* stop further DMA and reset queue ownership back to VF */ for (i = vf_q_idx; i < (queues_per_pool + vf_q_idx); i++) { @@ -1081,7 +1100,7 @@ STATIC s32 fm10k_iov_reset_resources_pf(struct fm10k_hw *hw, FM10K_WRITE_REG(hw, FM10K_MRQC(vf_info->vsi), 0); /* Update base address registers to contain MAC address */ - if (FM10K_IS_VALID_ETHER_ADDR(vf_info->mac)) { + if (IS_VALID_ETHER_ADDR(vf_info->mac)) { tdbal = (((u32)vf_info->mac[3]) << 24) | (((u32)vf_info->mac[4]) << 16) | (((u32)vf_info->mac[5]) << 8); @@ -1105,7 +1124,7 @@ STATIC s32 fm10k_iov_reset_resources_pf(struct fm10k_hw *hw, FM10K_WRITE_REG(hw, FM10K_RQMAP(qmap_idx + i), vf_q_idx + i); } - /* repeat the first ring for all of the remaining VF rings */ + /* repeat the first ring for all the remaining VF rings */ for (i = queues_per_pool; i < qmap_stride; i++) { FM10K_WRITE_REG(hw, FM10K_TQMAP(qmap_idx + i), vf_q_idx); FM10K_WRITE_REG(hw, FM10K_RQMAP(qmap_idx + i), vf_q_idx); @@ -1246,9 +1265,9 @@ s32 fm10k_iov_msg_mac_vlan_pf(struct fm10k_hw *hw, u32 **results, struct fm10k_mbx_info *mbx) { struct fm10k_vf_info *vf_info = (struct fm10k_vf_info *)mbx; - int err = FM10K_SUCCESS; u8 mac[ETH_ALEN]; u32 *result; + int err = FM10K_SUCCESS; bool set; u16 vlan; u32 vid; @@ -1267,18 +1286,32 @@ s32 fm10k_iov_msg_mac_vlan_pf(struct fm10k_hw *hw, u32 **results, if (err) return err; - /* verify upper 16 bits are zero */ - if (vid >> 16) - return FM10K_ERR_PARAM; - set = !(vid & FM10K_VLAN_CLEAR); vid &= ~FM10K_VLAN_CLEAR; - err = fm10k_iov_select_vid(vf_info, (u16)vid); - if (err < 0) - return err; + /* if the length field has been set, this is a multi-bit + * update request. For multi-bit requests, simply disallow + * them when the pf_vid has been set. In this case, the PF + * should have already cleared the VLAN_TABLE, and if we + * allowed them, it could allow a rogue VF to receive traffic + * on a VLAN it was not assigned. In the single-bit case, we + * need to modify requests for VLAN 0 to use the default PF or + * SW vid when assigned. + */ - vid = err; + if (vid >> 16) { + /* prevent multi-bit requests when PF has + * administratively set the VLAN for this VF + */ + if (vf_info->pf_vid) + return FM10K_ERR_PARAM; + } else { + err = fm10k_iov_select_vid(vf_info, (u16)vid); + if (err < 0) + return err; + + vid = err; + } /* update VSI info for VF in regards to VLAN table */ err = hw->mac.ops.update_vlan(hw, vid, vf_info->vsi, set); @@ -1293,7 +1326,7 @@ s32 fm10k_iov_msg_mac_vlan_pf(struct fm10k_hw *hw, u32 **results, return err; /* block attempts to set MAC for a locked device */ - if (FM10K_IS_VALID_ETHER_ADDR(vf_info->mac) && + if (IS_VALID_ETHER_ADDR(vf_info->mac) && memcmp(mac, vf_info->mac, ETH_ALEN)) return FM10K_ERR_PARAM; @@ -1427,10 +1460,10 @@ s32 fm10k_iov_msg_lport_state_pf(struct fm10k_hw *hw, u32 **results, err = fm10k_update_lport_state_pf(hw, vf_info->glort, 1, false); - /* need to clear VF_FLAG_ENABLED in order to ensure that we - * actually re-enable the lport state below. Note that this - * has no impact if VF is already disabled, as the flags are - * already zeroed. + /* we need to clear VF_FLAG_ENABLED flags in order to ensure + * that we actually re-enable the LPORT state below. Note that + * this has no impact if the VF is already disabled, as the + * flags are already cleared. */ if (!err) vf_info->vf_flags = FM10K_VF_FLAG_CAPABLE(vf_info); @@ -1670,13 +1703,12 @@ STATIC s32 fm10k_request_lport_map_pf(struct fm10k_hw *hw) * @hw: pointer to hardware structure * @switch_ready: pointer to boolean value that will record switch state * - * This funciton will check the DMA_CTRL2 register and mailbox in order + * This function will check the DMA_CTRL2 register and mailbox in order * to determine if the switch is ready for the PF to begin requesting * addresses and mapping traffic to the local interface. **/ STATIC s32 fm10k_get_host_state_pf(struct fm10k_hw *hw, bool *switch_ready) { - s32 ret_val = FM10K_SUCCESS; u32 dma_ctrl2; DEBUGFUNC("fm10k_get_host_state_pf"); @@ -1684,23 +1716,16 @@ STATIC s32 fm10k_get_host_state_pf(struct fm10k_hw *hw, bool *switch_ready) /* verify the switch is ready for interaction */ dma_ctrl2 = FM10K_READ_REG(hw, FM10K_DMA_CTRL2); if (!(dma_ctrl2 & FM10K_DMA_CTRL2_SWITCH_READY)) - goto out; + return FM10K_SUCCESS; /* retrieve generic host state info */ - ret_val = fm10k_get_host_state_generic(hw, switch_ready); - if (ret_val) - goto out; - - /* interface cannot receive traffic without logical ports */ - if (hw->mac.dglort_map == FM10K_DGLORTMAP_NONE) - ret_val = fm10k_request_lport_map_pf(hw); - -out: - return ret_val; + return fm10k_get_host_state_generic(hw, switch_ready); } /* This structure defines the attibutes to be parsed below */ const struct fm10k_tlv_attr fm10k_lport_map_msg_attr[] = { + FM10K_TLV_ATTR_LE_STRUCT(FM10K_PF_ATTR_ID_ERR, + sizeof(struct fm10k_swapi_error)), FM10K_TLV_ATTR_U32(FM10K_PF_ATTR_ID_LPORT_MAP), FM10K_TLV_ATTR_LAST }; @@ -2082,6 +2107,7 @@ s32 fm10k_init_ops_pf(struct fm10k_hw *hw) mac->ops.set_dma_mask = &fm10k_set_dma_mask_pf; mac->ops.get_fault = &fm10k_get_fault_pf; mac->ops.get_host_state = &fm10k_get_host_state_pf; + mac->ops.request_lport_map = &fm10k_request_lport_map_pf; mac->ops.adjust_systime = &fm10k_adjust_systime_pf; mac->ops.notify_offset = &fm10k_notify_offset_pf; mac->ops.read_systime = &fm10k_read_systime_pf;